Core:
- Move the interrupt affinity spreading mechanism into lib/group_cpus
so it can be used for similar spreading requirements, e.g. in the
block multi-queue code.
This also contains a first usecase in the block multi-queue code which
Jens asked to take along with the librarization.
- Improve irqdomain locking to close a number race conditions which
can be observed with massive parallel device driver probing.
- Enforce and document the semantics of disable_irq() which cannot be
invoked safely from non-sleepable context.
- Move the IPI multiplexing code from the Apple AIC driver into the
core. so it can be reused by RISCV.
Drivers:
- Plug OF node refcounting leaks in various drivers.
- Correctly mark level triggered interrupts in the Broadcom L2 drivers.
- The usual small fixes and improvements.
- No new drivers for the record!
-----BEGIN PGP SIGNATURE-----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=+pu3
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core:
- Move the interrupt affinity spreading mechanism into lib/group_cpus
so it can be used for similar spreading requirements, e.g. in the
block multi-queue code
This also contains a first usecase in the block multi-queue code
which Jens asked to take along with the librarization
- Improve irqdomain locking to close a number race conditions which
can be observed with massive parallel device driver probing
- Enforce and document the semantics of disable_irq() which cannot be
invoked safely from non-sleepable context
- Move the IPI multiplexing code from the Apple AIC driver into the
core, so it can be reused by RISCV
Drivers:
- Plug OF node refcounting leaks in various drivers
- Correctly mark level triggered interrupts in the Broadcom L2
drivers
- The usual small fixes and improvements
- No new drivers for the record!"
* tag 'irq-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts
irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts
irqdomain: Switch to per-domain locking
irqchip/mvebu-odmi: Use irq_domain_create_hierarchy()
irqchip/loongson-pch-msi: Use irq_domain_create_hierarchy()
irqchip/gic-v3-mbi: Use irq_domain_create_hierarchy()
irqchip/gic-v3-its: Use irq_domain_create_hierarchy()
irqchip/gic-v2m: Use irq_domain_create_hierarchy()
irqchip/alpine-msi: Use irq_domain_add_hierarchy()
x86/uv: Use irq_domain_create_hierarchy()
x86/ioapic: Use irq_domain_create_hierarchy()
irqdomain: Clean up irq_domain_push/pop_irq()
irqdomain: Drop leftover brackets
irqdomain: Drop dead domain-name assignment
irqdomain: Drop revmap mutex
irqdomain: Fix domain registration race
irqdomain: Fix mapping-creation race
irqdomain: Refactor __irq_domain_alloc_irqs()
irqdomain: Look for existing mapping only once
irqdomain: Drop bogus fwspec-mapping error handling
...
* irq/misc-6.3:
: .
: - Cleanup Kconfig dependencies for LS_SCFG_MSI
:
: - Improve save/restore for the loongson-liointc irqchip
:
: - Correctly initialise status and enable registers for one
: of the ASpeed controllers
: .
irqchip/ls-scfg-msi: Simplify Kconfig dependencies
irqchip/loongson-liointc: Save/restore int_edge/int_pol registers during S3/S4
irqchip/aspeed-scu-ic: Correctly initialise status and enable registers
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that the complexity of the AIC IPI mux has been copied into
the core code for the benefit of the riscv architecture,
shrink the AIC driver by the same amount by using that infrastructure.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20230103141221.772261-10-apatel@ventanamicro.com
The aintc driver was used on Davinci DM3xx and DM64xx SoCs, all of
which got dropped from Linux, so this driver is orphaned as well.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Support for the T-Head PMU via the perf subsystem.
* ftrace support for rv32.
* Support for non-volatile memory devices.
* Various fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=4Ak2
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.2-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the T-Head PMU via the perf subsystem
- ftrace support for rv32
- Support for non-volatile memory devices
- Various fixes and cleanups
* tag 'riscv-for-linus-6.2-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
Documentation: RISC-V: patch-acceptance: s/implementor/implementer
Documentation: RISC-V: Mention the UEFI Standards
Documentation: RISC-V: Allow patches for non-standard behavior
Documentation: RISC-V: Fix a typo in patch-acceptance
riscv: Fixup compile error with !MMU
riscv: Fix P4D_SHIFT definition for 3-level page table mode
riscv: Apply a static assert to riscv_isa_ext_id
RISC-V: Add some comments about the shadow and overflow stacks
RISC-V: Align the shadow stack
RISC-V: Ensure Zicbom has a valid block size
RISC-V: Introduce riscv_isa_extension_check
RISC-V: Improve use of isa2hwcap[]
riscv: Don't duplicate _ALTERNATIVE_CFG* macros
riscv: alternatives: Drop the underscores from the assembly macro names
riscv: alternatives: Don't name unused macro parameters
riscv: Don't duplicate __ALTERNATIVE_CFG in __ALTERNATIVE_CFG_2
riscv: mm: call best_map_size many times during linear-mapping
riscv: Move cast inside kernel_mapping_[pv]a_to_[vp]a
riscv: Fix crash during early errata patching
riscv: boot: add zstd support
...
Since commit e71ee06e3c ("RISC-V: Force select RISCV_INTC for
CONFIG_RISCV") the driver has been enabled at the arch level - and is
mandatory anyway. There's no point exposing this as a choice to users,
so stop bothering.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221118104300.85016-3-conor@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The SiFive PLIC driver is used by all current implementations, including
those that do not have a SiFive PLIC. The current driver supports more
than just SiFive PLICs at present and, where possible, future PLIC
implementations will also use this driver. As every supported RISC-V SoC
selects the driver directly in Kconfig.socs there's no point in exposing
this kconfig option to users.
The Kconfig help text, in its current form, is misleading. There's no
point doing anything about that though, as it will no longer be user
selectable. Remove it.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221118104300.85016-2-conor@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- More APCI fixes and improvements for the LoongArch architecture,
adding support for the HTVEC irqchip, suspend-resume, and some
PCI INTx workarounds
- Initial DT support for LoongArch. I'm not even kidding.
- Support for the MTK CIRQv2, a minor deviation from the original version
- Error handling fixes for wpcm450, GIC...
- BE detection for a FSL controller
- Declare the Sifive PLIC as wake-up agnostic
- Simplify fishing out the device data for the ST irqchip
- Mark some data structures as __initconst in the apple-aic driver
- Switch over from strtobool to kstrtobool
- COMPILE_TEST fixes
-----BEGIN PGP SIGNATURE-----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=fhi8
-----END PGP SIGNATURE-----
Merge tag 'irqchip-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates frim Marc Zyngier:
- More APCI fixes and improvements for the LoongArch architecture,
adding support for the HTVEC irqchip, suspend-resume, and some
PCI INTx workarounds
- Initial DT support for LoongArch. I'm not even kidding.
- Support for the MTK CIRQv2, a minor deviation from the original version
- Error handling fixes for wpcm450, GIC...
- BE detection for a FSL controller
- Declare the Sifive PLIC as wake-up agnostic
- Simplify fishing out the device data for the ST irqchip
- Mark some data structures as __initconst in the apple-aic driver
- Switch over from strtobool to kstrtobool
- COMPILE_TEST fixes
* irq/misc-6.2:
: .
: Random minor fixes and improvments:
:
: - More Loongson fixes after the Loongarch merge
:
: - Error handling fixes for wpcm450, GIC...
:
: - BE detection for a FSL controller
:
: - Declare the Sifive PLIC as wake-up agnostic
:
: - Simplify fishing out the device data for the ST irqchip
:
: - Mark some data structures as __initconst in the apple-aic driver
:
: - Switch over from strtobool to kstrtobool
:
: - COMPILET_TEST fixes
:
: - and the mandatory "repeated word" commit...
: .
irqchip/ls-extirq: Fix endianness detection
irqchip/gic: Use kstrtobool() instead of strtobool()
irqchip/sifive-plic: Support wake IRQs
irqchip/loongson-liointc: Fix improper error handling in liointc_init()
irqchip/sl28cpld: Replace irqchip mask_invert with unmask_base
irqchip/wpcm450: Fix memory leak in wpcm450_aic_of_init()
irqchip/st: Use device_get_match_data() to simplify the code
irqchip/al-fic: Drop obsolete dependency on COMPILE_TEST
irqchip: gic-pm: Use pm_runtime_resume_and_get() in gic_probe()
irqchip/mips-gic: Drop repeated word in comment
irqchip/apple-aic: Mark aic_info structs __initconst
Signed-off-by: Marc Zyngier <maz@kernel.org>
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Talel Shenhar <talel@amazon.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221121161622.6294a899@endymion.delvare
HTVECINTC stands for "HyperTransport Interrupts" that described in
Section 14.3 of "Loongson 3A5000 Processor Reference Manual". For more
information please refer Documentation/loongarch/irq-chip-model.rst.
Though the extended model is the recommended one, there are still some
legacy model machines. So we add ACPI init support for HTVECINTC.
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020142535.1725573-1-chenhuacai@loongson.cn
Adjust to reality and remove another layer of pointless Kconfig
indirection. CONFIG_GENERIC_MSI_IRQ is good enough to serve
all purposes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122014.524842979@linutronix.de
- Core code:
- Provide a generic wrapper which can be utilized in drivers to handle
the problem of force threaded demultiplex interrupts on RT enabled
kernels. This avoids conditionals and horrible quirks in drivers all
over the place.
- Fix up affected pinctrl and GPIO drivers to make them cleanly RT safe.
- Interrupt drivers:
- A new driver for the FSL MU platform specific MSI implementation.
- Make irqchip_init() available for pure ACPI based systems.
- Provide a functional DT binding for the Realtek RTL interrupt chip.
- The usual DT updates and small code improvements all over the place.
-----BEGIN PGP SIGNATURE-----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=2ok5
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt updates from Thomas Gleixner:
"Core code:
- Provide a generic wrapper which can be utilized in drivers to
handle the problem of force threaded demultiplex interrupts on RT
enabled kernels. This avoids conditionals and horrible quirks in
drivers all over the place
- Fix up affected pinctrl and GPIO drivers to make them cleanly RT
safe
Interrupt drivers:
- A new driver for the FSL MU platform specific MSI implementation
- Make irqchip_init() available for pure ACPI based systems
- Provide a functional DT binding for the Realtek RTL interrupt chip
- The usual DT updates and small code improvements all over the
place"
* tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
irqchip: IMX_MU_MSI should depend on ARCH_MXC
irqchip/imx-mu-msi: Fix wrong register offset for 8ulp
irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmap
dt-bindings: irqchip: Describe the IMX MU block as a MSI controller
irqchip: Add IMX MU MSI controller driver
dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support
irqchip/gic-v3: Fix typo in comment
dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding
dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells
irqchip: Allow extra fields to be passed to IRQCHIP_PLATFORM_DRIVER_END
platform-msi: Export symbol platform_msi_create_irq_domain()
irqchip/realtek-rtl: use parent interrupts
dt-bindings: interrupt-controller: realtek,rtl-intc: require parents
irqchip/realtek-rtl: use irq_domain_add_linear()
irqchip: Make irqchip_init() usable on pure ACPI systems
bcma: gpio: Use generic_handle_irq_safe()
gpio: mlxbf2: Use generic_handle_irq_safe()
platform/x86: intel_int0002_vgpio: Use generic_handle_irq_safe()
ssb: gpio: Use generic_handle_irq_safe()
pinctrl: amd: Use generic_handle_irq_safe()
...
The Freescale/NXP i.MX Messaging Unit is only present on Freescale/NXP
i.MX SoCs. Hence add a dependency on ARCH_MXC, to prevent asking the
user about this driver when configuring a kernel without Freescale/NXP
i.MX SoC family support.
While at it, expand "MU" to "Messaging Unit" in the help text.
Fixes: 70afdab904 ("irqchip: Add IMX MU MSI controller driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/7f3bd932614ddbff46a1b750ef45b231130364ad.1664900434.git.geert+renesas@glider.be
* irq/misc-6.1:
: .
: Misc irqchip updates for 6.1:
:
: - Allow generic irqchip support without selecting CONFIG_OF_IRQ
:
: - Fix a couple of bindings for TI interrupts controllers
:
: - Yet another binding update for a Renesas SoC
:
: - The obligatory fixes from the spelling police
: .
dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support
irqchip/gic-v3: Fix typo in comment
dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding
dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells
irqchip: Make irqchip_init() usable on pure ACPI systems
Signed-off-by: Marc Zyngier <maz@kernel.org>
The MU block found in a number of Freescale/NXP SoCs supports generating
IRQs by writing data to a register.
This enables the MU block to be used as a MSI controller, by leveraging
the platform-MSI API.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[maz: dropped pointless dma-iommu.h and of_pci.h includes]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220922161246.20586-4-Frank.Li@nxp.com
Pure ACPI systems (e.g., LoongArch) do not need OF_IRQ, but still
require irqchip_init() to perform the ACPI irqchip probing,
even when OF_IRQ isn't selected.
Relax the dependency to enable the generic irqchip support when
ACPI_GENERIC_GSI is configured.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn>
[maz: revamped commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220927124557.3246737-1-chenhuacai@loongson.cn
The loongson-pch-lpc driver may be selected in a random
configuration, but it is only supported for LoongArch, So,
the dependence on LoongArch is added for it to avoid compile
error for a random configuration of other architetures.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220916071926.28368-1-lvjianmin@loongson.cn
LoongArch irqchips have a fixed hierarchy which currently can't be
described by ACPI tables, so upstream irqchip drivers call downstream
irqchip drivers' initialization directly. As a result, the top level
(CPU-level) irqchip driver should explicitly select downstream drivers
to avoid build errors.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220808085319.3350111-1-chenhuacai@loongson.cn
This adds initial support for two SoC families that have been under
review for a while. In both cases, the origonal idea was to have a
minimally functional version, but we ended up leaving out the clk drivers
that are still under review and will be merged through the corresponding
subsystem tree.
The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
based on the 32-bit NPCM7xx family but is now getting added to
arch/arm64 as well.
Sunplus SP7021, also known as Plus1, is a general-purpose
System-in-Package design based on the 32-bit Cortex-A7 SoC
on the main chip, plus an I/O chip and memory in the same
-----BEGIN PGP SIGNATURE-----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=7Id+
-----END PGP SIGNATURE-----
Merge tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM new SoC support from Arnd Bergmann:
"This adds initial support for two SoC families that have been under
review for a while. In both cases, the origonal idea was to have a
minimally functional version, but we ended up leaving out the clk
drivers that are still under review and will be merged through the
corresponding subsystem tree.
The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
based on the 32-bit NPCM7xx family but is now getting added to
arch/arm64 as well.
Sunplus SP7021, also known as Plus1, is a general-purpose
System-in-Package design based on the 32-bit Cortex-A7 SoC on the main
chip, plus an I/O chip and memory in the same"
* tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE
arm64: defconfig: Add Nuvoton NPCM family support
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add maintainer
reset: npcm: Add NPCM8XX support
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: using syscon instead of device data
ARM: dts: nuvoton: add reset syscon property
dt-bindings: reset: npcm: add GCR syscon property
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
dt-bindings: watchdog: npcm: Add npcm845 compatible string
dt-bindings: timer: npcm: Add npcm845 compatible string
ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig
ARM: sunplus: Add initial support for Sunplus SP7021 SoC
irqchip: Add Sunplus SP7021 interrupt controller driver
...
core:
- Fix a few inconsistencies between UP and SMP vs. interrupt affinities
- Small updates and cleanups all over the place
drivers:
- New driver for the LoongArch interrupt controller
- New driver for the Renesas RZ/G2L interrupt controller
- Hotpath optimization for SiFive PLIC
- Workaround for broken PLIC edge triggered interrupts
- Simall cleanups and improvements as usual
-----BEGIN PGP SIGNATURE-----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=OnhF
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for interrupt core and drivers:
Core:
- Fix a few inconsistencies between UP and SMP vs interrupt
affinities
- Small updates and cleanups all over the place
New drivers:
- LoongArch interrupt controller
- Renesas RZ/G2L interrupt controller
Updates:
- Hotpath optimization for SiFive PLIC
- Workaround for broken PLIC edge triggered interrupts
- Simall cleanups and improvements as usual"
* tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
irqchip/mmp: Declare init functions in common header file
irqchip/mips-gic: Check the return value of ioremap() in gic_of_init()
genirq: Use for_each_action_of_desc in actions_show()
irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch
irqchip: Add LoongArch CPU interrupt controller support
irqchip: Add Loongson Extended I/O interrupt controller support
irqchip/loongson-liointc: Add ACPI init support
irqchip/loongson-pch-msi: Add ACPI init support
irqchip/loongson-pch-pic: Add ACPI init support
irqchip: Add Loongson PCH LPC controller support
LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain
LoongArch: Use ACPI_GENERIC_GSI for gsi handling
genirq/generic_chip: Export irq_unmap_generic_chip
ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback
APCI: irq: Add support for multiple GSI domains
LoongArch: Provisionally add ACPICA data structures
irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains
irqdomain: Report irq number for NOMAP domains
irqchip/gic-v3: Fix comment typo
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC
...
* irq/loongarch:
: .
: Merge the long awaited IRQ support for the LoongArch architecture.
:
: From the cover letter:
:
: "Currently, LoongArch based processors (e.g. Loongson-3A5000)
: can only work together with LS7A chipsets. The irq chips in
: LoongArch computers include CPUINTC (CPU Core Interrupt
: Controller), LIOINTC (Legacy I/O Interrupt Controller),
: EIOINTC (Extended I/O Interrupt Controller), PCH-PIC (Main
: Interrupt Controller in LS7A chipset), PCH-LPC (LPC Interrupt
: Controller in LS7A chipset) and PCH-MSI (MSI Interrupt Controller)."
:
: Note that this comes with non-official, arch private ACPICA
: definitions until the official ACPICA update is realeased.
: .
irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch
irqchip: Add LoongArch CPU interrupt controller support
irqchip: Add Loongson Extended I/O interrupt controller support
irqchip/loongson-liointc: Add ACPI init support
irqchip/loongson-pch-msi: Add ACPI init support
irqchip/loongson-pch-pic: Add ACPI init support
irqchip: Add Loongson PCH LPC controller support
LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain
LoongArch: Use ACPI_GENERIC_GSI for gsi handling
genirq/generic_chip: Export irq_unmap_generic_chip
ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback
APCI: irq: Add support for multiple GSI domains
LoongArch: Provisionally add ACPICA data structures
Signed-off-by: Marc Zyngier <maz@kernel.org>
LoongArch CPUINTC stands for CSR.ECFG/CSR.ESTAT and related interrupt
controller that described in Section 7.4 of "LoongArch Reference Manual,
Vol 1". For more information please refer Documentation/loongarch/irq-
chip-model.rst.
LoongArch CPUINTC has 13 interrupt sources: SWI0~1, HWI0~7, IPI, TI
(Timer) and PCOV (PMC). IRQ mappings of HWI0~7 are configurable (can be
created from DT/ACPI), but IPI, TI (Timer) and PCOV (PMC) are hardcoded
bits, so we expose the fwnode_handle to map them, and get mapped irq
by irq_create_mapping when using them.
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1658314292-35346-13-git-send-email-lvjianmin@loongson.cn
EIOINTC stands for "Extended I/O Interrupts" that described in Section
11.2 of "Loongson 3A5000 Processor Reference Manual". For more
information please refer Documentation/loongarch/irq-chip-model.rst.
Loongson-3A5000 has 4 cores per NUMA node, and each NUMA node has an
EIOINTC; while Loongson-3C5000 has 16 cores per NUMA node, and each NUMA
node has 4 EIOINTCs. In other words, 16 cores of one NUMA node in
Loongson-3C5000 are organized in 4 groups, each group connects to an
EIOINTC. We call the "group" here as an EIOINTC node, so each EIOINTC
node always includes 4 cores (both in Loongson-3A5000 and Loongson-
3C5000).
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1658314292-35346-12-git-send-email-lvjianmin@loongson.cn
PCH-PIC/PCH-MSI stands for "Interrupt Controller" that described in
Section 5 of "Loongson 7A1000 Bridge User Manual". For more information
please refer Documentation/loongarch/irq-chip-model.rst.
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1658314292-35346-10-git-send-email-lvjianmin@loongson.cn
PCH-PIC/PCH-MSI stands for "Interrupt Controller" that described in
Section 5 of "Loongson 7A1000 Bridge User Manual". For more information
please refer Documentation/loongarch/irq-chip-model.rst.
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1658314292-35346-9-git-send-email-lvjianmin@loongson.cn
PCH-LPC stands for "LPC Interrupts" that described in Section 24.3 of
"Loongson 7A1000 Bridge User Manual". For more information please refer
Documentation/loongarch/irq-chip-model.rst.
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1658314292-35346-8-git-send-email-lvjianmin@loongson.cn
The PLIC driver already updates the effective affinity mask in its
.irq_set_affinity callback. Take advantage of that information to only
touch bits (and take spinlocks) for the specific relevant hart contexts.
First, make sure the effective affinity mask is set before IRQ startup.
Then, since this mask already takes priv->lmask into account, checking
that mask later is no longer needed (and handler->present is equivalent
to the bit being set in priv->lmask).
Finally, when (un)masking or changing affinity, only clear/set the
enable bits in the specific old/new context(s). The cpumask operations
in plic_irq_unmask() are not needed because they duplicate the code in
plic_set_affinity().
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220701202440.59059-2-samuel@sholland.org
Add a driver for the Renesas RZ/G2L Interrupt Controller.
This supports external pins being used as interrupts. It supports
one line for NMI, 8 external pins and 32 GPIO pins (out of 123)
to be used as IRQ lines.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220707182314.66610-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Add interrupt controller driver for Sunplus SP7021 SoC.
This is the interrupt controller in P-chip which collects all interrupt
sources in P-chip and routes them to parent interrupt controller in C-chip.
Signed-off-by: Qin Jian <qinjian@cqplus1.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
An IRQ's effective affinity can only be different from its configured
affinity if there are multiple CPUs. Make it clear that this option is
only meaningful when SMP is enabled. Most of the relevant code in
irqdesc.c is already hidden behind CONFIG_SMP anyway.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220701200056.46555-4-samuel@sholland.org
The generic IPI code depends on the IRQ affinity mask being allocated
and initialized. This will not be the case if SMP is disabled. Fix up
the remaining driver that selected GENERIC_IRQ_IPI in a non-SMP config.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220701200056.46555-3-samuel@sholland.org
The MIPS GIC irqchip driver may be selected in a uniprocessor
configuration, but it unconditionally registers an IPI domain.
Limit the part of the driver dealing with IPIs to only be compiled when
GENERIC_IRQ_IPI is enabled, which corresponds to an SMP configuration.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220701200056.46555-2-samuel@sholland.org
Commit b84dc7f0e3 ("irqchip/xilinx: Remove microblaze+zynq
dependency") relaxed the dependencies on the Xilinx interrupt controller
to be OF only, but some OF architectures (s390 for example) do not
support OF_ADDRESS and so a build of the driver will result in undefined
references to of_iomap/iounmap and friends.
Fixes: b84dc7f0e3 ("irqchip/xilinx: Remove microblaze+zynq dependency")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630111008.3838307-1-jamie@jamieiles.com
The Xilinx IRQ controller doesn't really have any architecture
dependencies - it's a generic AXI component that can be used for any
FPGA core from Zynq hard processor systems to microblaze+riscv soft
cores and more.
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220606213952.298686-1-jamie@jamieiles.com
HTVEC will be shared by both MIPS-based and LoongArch-based Loongson
processors (not only Loongson-3), so we adjust its description. HTPIC is
only used by MIPS-based Loongson, so we add a MIPS dependency.
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The asm-generic tree contains three separate changes for linux-5.19:
- The h8300 architecture is retired after it has been effectively
unmaintained for a number of years. This is the last architecture we
supported that has no MMU implementation, but there are still a few
architectures (arm, m68k, riscv, sh and xtensa) that support CPUs with
and without an MMU.
- A series to add a generic ticket spinlock that can be shared by most
architectures with a working cmpxchg or ll/sc type atomic, including
the conversion of riscv, csky and openrisc. This series is also a
prerequisite for the loongarch64 architecture port that will come as
a separate pull request.
- A cleanup of some exported uapi header files to ensure they can be
included from user space without relying on other kernel headers.
-----BEGIN PGP SIGNATURE-----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=ri2Q
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"The asm-generic tree contains three separate changes for linux-5.19:
- The h8300 architecture is retired after it has been effectively
unmaintained for a number of years. This is the last architecture
we supported that has no MMU implementation, but there are still a
few architectures (arm, m68k, riscv, sh and xtensa) that support
CPUs with and without an MMU.
- A series to add a generic ticket spinlock that can be shared by
most architectures with a working cmpxchg or ll/sc type atomic,
including the conversion of riscv, csky and openrisc. This series
is also a prerequisite for the loongarch64 architecture port that
will come as a separate pull request.
- A cleanup of some exported uapi header files to ensure they can be
included from user space without relying on other kernel headers"
* tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
h8300: remove stale bindings and symlink
sparc: add asm/stat.h to UAPI compile-test coverage
powerpc: add asm/stat.h to UAPI compile-test coverage
mips: add asm/stat.h to UAPI compile-test coverage
riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage
kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
agpgart.h: do not include <stdlib.h> from exported header
csky: Move to generic ticket-spinlock
RISC-V: Move to queued RW locks
RISC-V: Move to generic spinlocks
openrisc: Move to ticket-spinlock
asm-generic: qrwlock: Document the spinlock fairness requirements
asm-generic: qspinlock: Indicate the use of mixed-size atomics
asm-generic: ticket-lock: New generic ticket-based spinlock
remove the h8300 architecture
Not all of these drivers are needed on every ARCH_SUNXI platform. In
particular, the ARCH_SUNXI symbol will be reused for the Allwinner D1,
a RISC-V SoC which contains none of these irqchips.
Introduce Kconfig symbols so we can select only the drivers actually
used by a particular set of platforms. This also lets us move the
irqchip driver dependencies to a more appropriate location.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220509034941.30704-1-samuel@sholland.org
If MAILBOX is n, building fails:
drivers/irqchip/irq-qcom-mpm.o: In function `mpm_pd_power_off':
irq-qcom-mpm.c:(.text+0x174): undefined reference to `mbox_send_message'
irq-qcom-mpm.c:(.text+0x174): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `mbox_send_message'
Make QCOM_MPM depends on MAILBOX to fix this.
Fixes: a6199bb514 ("irqchip: Add Qualcomm MPM controller driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220317131956.30004-1-yuehaibing@huawei.com
* 'remove-h8300' of git://git.infradead.org/users/hch/misc:
remove the h8300 architecture
This is clearly the least actively maintained architecture we have at
the moment, and probably the least useful. It is now the only one that
does not support MMUs at all, and most of the boards only support 4MB
of RAM, out of which the defconfig kernel needs more than half just
for .text/.data.
Guenter Roeck did the original patch to remove the architecture in 2013
after it had already been obsolete for a while, and Yoshinori Sato brought
it back in a much more modern form in 2015. Looking at the git history
since the reinstantiation, it's clear that almost all commits in the tree
are build fixes or cross-architecture cleanups:
$ git log --no-merges --format=%an v4.5.. arch/h8300/ | sort | uniq
-c | sort -rn | head -n 12
25 Masahiro Yamada
18 Christoph Hellwig
14 Mike Rapoport
9 Arnd Bergmann
8 Mark Rutland
7 Peter Zijlstra
6 Kees Cook
6 Ingo Molnar
6 Al Viro
5 Randy Dunlap
4 Yury Norov
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm SoCs based on the RPM architecture have a MSM Power Manager (MPM)
in always-on domain. In addition to managing resources during sleep, the
hardware also has an interrupt controller that monitors the interrupts
when the system is asleep, wakes up the APSS when one of these interrupts
occur and replays it to GIC after it becomes operational.
It adds an irqchip driver for this interrupt controller, and here are
some notes about it.
- For given SoC, a fixed number of MPM pins are supported, e.g. 96 pins
on QCM2290. Each of these MPM pins can be either a MPM_GIC pin or
a MPM_GPIO pin. The mapping between MPM_GIC pin and GIC interrupt
is defined by SoC, as well as the mapping between MPM_GPIO pin and
GPIO number. The former mapping is retrieved from device tree, while
the latter is defined in TLMM pinctrl driver.
- The power domain (PD) .power_off hook is used to notify RPM that APSS
is about to power collapse. This requires MPM PD be the parent PD of
CPU cluster.
- When SoC gets awake from sleep mode, the driver will receive an
interrupt from RPM, so that it can replay interrupt for particular
polarity.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220308080534.3384532-3-shawn.guo@linaro.org
* irq/mchp-eic:
: .
: New irqchip driver for the Microchip EIC block
: .
irqchip/mchp-eic: Fix return value check in mchp_eic_init()
irqchip/mchp-eic: Add support for the Microchip EIC
dt-bindings: microchip,eic: Add bindings for the Microchip EIC
Signed-off-by: Marc Zyngier <maz@kernel.org>
Allow the user selection and building of this interrupt controller
driver as a module since it is used on ARM/ARM64 based systems as a
second level interrupt controller hanging off the ARM GIC and is
therefore loadable during boot.
To avoid using of_irq_count() which is not exported towards module,
switch the driver to use the platform_device provided by the irqchip
platform driver code and resolve the number of interrupts using
platform_irq_count().
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211020184859.2705451-11-f.fainelli@gmail.com
Allow the user selection and building of this interrupt controller
driver as a module since it is used on ARM/ARM64 based systems as a
second level interrupt controller hanging off the ARM GIC and is
therefore loadable during boot.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211020184859.2705451-9-f.fainelli@gmail.com
Allow the user selection and building of this interrupt controller
driver as a module since it is used on ARM/ARM64 based systems as a
second level interrupt controller hanging off the ARM GIC and is
therefore loadable during boot.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211020184859.2705451-7-f.fainelli@gmail.com
Add support for Microchip External Interrupt Controller. The controller
supports 2 external interrupt lines. For every external input there is
a connection to GIC. The interrupt controllers contains only 4
registers:
- EIC_GFCS (read only): which indicates that glitch filter configuration
is ready (not addressed in this implementation)
- EIC_SCFG0R, EIC_SCFG1R (read, write): allows per interrupt specific
settings: enable, polarity/edge settings, glitch filter settings
- EIC_WPMR, EIC_WPSR: enables write protection mode specific settings
(which are architecture specific) for the controller and are not
addressed in this implementation
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210927063657.2157676-3-claudiu.beznea@microchip.com
In order to reduce the kernel Image size on multi-platform distributions,
make it possible to build the Amlogic GPIO IRQ controller as a module
by switching it to a platform driver.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Saravana Kannan <saravanak@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210902134914.176986-2-narmstrong@baylibre.com
Linus Torvalds