The MRU value used by the MHI MBIM network interface affects
the throughput performance of the interface. Different modem
models use different default MRU sizes based on their bandwidth
capabilities. Large values generally result in higher throughput
for larger packet sizes.
In addition if the MRU used by the MHI device is larger than that
specified in the MHI net device the data is fragmented and needs
to be re-assembled which generates a (single) warning message about
the fragmented packets. Setting the MRU on both ends avoids the
extra processing to re-assemble the packets.
This patch allows the documented MRU for a modem to be automatically
set as the MHI net device MRU avoiding fragmentation and improving
throughput performance.
Signed-off-by: Richard Laing <richard.laing@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Reset controllers: Adding support for Microchip Sparx5 Switch.
- Memory controllers: ARM Primecell PL35x SMC memory controller
driver cleanups and improvements.
- i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.
- Rockchip: RK3568 power domains support + DT binding updates,
cleanups.
- Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
including support for MSM8226, MDM9607, SM6125 and SC8180X.
- ARM FFA driver: "Firmware Framework for ARMv8-A", defining
management interfaces and communication (including bus model)
between partitions both in Normal and Secure Worlds.
- Tegra Memory controller changes, including major rework to deal
with identity mappings at boot and integration with ARM SMMU
pieces.
-----BEGIN PGP SIGNATURE-----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=kPg8
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Olof Johansson:
- Reset controllers: Adding support for Microchip Sparx5 Switch.
- Memory controllers: ARM Primecell PL35x SMC memory controller driver
cleanups and improvements.
- i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.
- Rockchip: RK3568 power domains support + DT binding updates,
cleanups.
- Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
including support for MSM8226, MDM9607, SM6125 and SC8180X.
- ARM FFA driver: "Firmware Framework for ARMv8-A", defining management
interfaces and communication (including bus model) between partitions
both in Normal and Secure Worlds.
- Tegra Memory controller changes, including major rework to deal with
identity mappings at boot and integration with ARM SMMU pieces.
* tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits)
firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string
firmware: turris-mox-rwtm: show message about HWRNG registration
firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng
firmware: turris-mox-rwtm: report failures better
firmware: turris-mox-rwtm: fix reply status decoding function
soc: imx: gpcv2: add support for i.MX8MN power domains
dt-bindings: add defines for i.MX8MN power domains
firmware: tegra: bpmp: Fix Tegra234-only builds
iommu/arm-smmu: Use Tegra implementation on Tegra186
iommu/arm-smmu: tegra: Implement SID override programming
iommu/arm-smmu: tegra: Detect number of instances at runtime
dt-bindings: arm-smmu: Add Tegra186 compatible string
firmware: qcom_scm: Add MDM9607 compatible
soc: qcom: rpmpd: Add MDM9607 RPM Power Domains
soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's
soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's
dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml
memory: emif: remove unused frequency and voltage notifiers
memory: fsl_ifc: fix leak of private memory on probe failure
memory: fsl_ifc: fix leak of IO mapping on probe failure
...
Here is the big set of char / misc and other driver subsystem updates
for 5.14-rc1. Included in here are:
- habanna driver updates
- fsl-mc driver updates
- comedi driver updates
- fpga driver updates
- extcon driver updates
- interconnect driver updates
- mei driver updates
- nvmem driver updates
- phy driver updates
- pnp driver updates
- soundwire driver updates
- lots of other tiny driver updates for char and misc drivers
This is looking more and more like the "various driver subsystems mushed
together" tree...
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYOM8jQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymECgCg0yL+8WxDKO5Gg5llM5PshvLB1rQAn0y5pDgg
nw78LV3HQ0U7qaZBtI91
=x+AR
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big set of char / misc and other driver subsystem updates
for 5.14-rc1. Included in here are:
- habanalabs driver updates
- fsl-mc driver updates
- comedi driver updates
- fpga driver updates
- extcon driver updates
- interconnect driver updates
- mei driver updates
- nvmem driver updates
- phy driver updates
- pnp driver updates
- soundwire driver updates
- lots of other tiny driver updates for char and misc drivers
This is looking more and more like the "various driver subsystems
mushed together" tree...
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
mcb: Use DEFINE_RES_MEM() helper macro and fix the end address
PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable
bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls
bus: mhi: Wait for M2 state during system resume
bus: mhi: core: Fix power down latency
intel_th: Wait until port is in reset before programming it
intel_th: msu: Make contiguous buffers uncached
intel_th: Remove an unused exit point from intel_th_remove()
stm class: Spelling fix
nitro_enclaves: Set Bus Master for the NE PCI device
misc: ibmasm: Modify matricies to matrices
misc: vmw_vmci: return the correct errno code
siox: Simplify error handling via dev_err_probe()
fpga: machxo2-spi: Address warning about unused variable
lkdtm/heap: Add init_on_alloc tests
selftests/lkdtm: Enable various testable CONFIGs
lkdtm: Add CONFIG hints in errors where possible
lkdtm: Enable DOUBLE_FAULT on all architectures
lkdtm/heap: Add vmalloc linear overflow test
lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE
...
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out panic and
oops helpers.
There are several purposes of doing this:
- dropping dependency in bug.h
- dropping a loop by moving out panic_notifier.h
- unload kernel.h from something which has its own domain
At the same time convert users tree-wide to use new headers, although for
the time being include new header back to kernel.h to avoid twisted
indirected includes for existing users.
[akpm@linux-foundation.org: thread_info.h needs limits.h]
[andriy.shevchenko@linux.intel.com: ia64 fix]
Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During system resume, MHI host triggers M3->M0 transition and then waits
for target device to enter M0 state. Once done, the device queues a state
change event into ctrl event ring and notifies MHI host by raising an
interrupt, where a tasklet is scheduled to process this event. In most
cases, the tasklet is served timely and wait operation succeeds.
However, there are cases where CPU is busy and cannot serve this tasklet
for some time. Once delay goes long enough, the device moves itself to M1
state and also interrupts MHI host after inserting a new state change
event to ctrl ring. Later when CPU finally has time to process the ring,
there will be two events:
1. For M3->M0 event, which is the first event to be processed queued first.
The tasklet handler serves the event, updates device state to M0 and
wakes up the task.
2. For M0->M1 event, which is processed later, the tasklet handler
triggers M1->M2 transition and updates device state to M2 directly,
then wakes up the MHI host (if it is still sleeping on this wait queue).
Note that although MHI host has been woken up while processing the first
event, it may still has no chance to run before the second event is
processed. In other words, MHI host has to keep waiting till timeout
causing the M0 state to be missed.
kernel log here:
...
Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.911251] mhi 0000:06:00.0: Entered with PM state: M3, MHI state: M3
Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.917762] mhi 0000:06:00.0: State change event to state: M0
Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.917767] mhi 0000:06:00.0: State change event to state: M1
Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4338.788231] mhi 0000:06:00.0: Did not enter M0 state, MHI state: M2, PM state: M2
...
Fix this issue by simply adding M2 as a valid state for resume.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Cc: stable@vger.kernel.org
Fixes: 0c6b20a1d7 ("bus: mhi: core: Add support for MHI suspend and resume")
Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210524040312.14409-1-bqiang@codeaurora.org
[mani: slightly massaged the commit message]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210621161616.77524-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On graceful power-down/disable transition, when an MHI reset is
performed, the MHI device loses its context, including interrupt
configuration. However, the current implementation is waiting for
event(irq) driven state change to confirm reset has been completed,
which never happens, and causes reset timeout, leading to unexpected
high latency of the mhi_power_down procedure (up to 45 seconds).
Fix that by moving to the recently introduced poll_reg_field method,
waiting for the reset bit to be cleared, in the same way as the
power_on procedure.
Cc: stable@vger.kernel.org
Fixes: a6e2e3522f ("bus: mhi: core: Add support for PM state transitions")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Link: https://lore.kernel.org/r/1620029090-8975-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210621161616.77524-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/bus/fsl-mc/mc-io.c:70: warning: Function parameter or member 'dpmcp_dev' not described in 'fsl_create_mc_io'
Cc: Stuart Yoder <stuyoder@gmail.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-8-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/bus/fsl-mc/fsl-mc-msi.c:164: warning: Function parameter or member 'fwnode' not described in 'fsl_mc_msi_create_irq_domain'
drivers/bus/fsl-mc/fsl-mc-msi.c:164: warning: Excess function parameter 'np' description in 'fsl_mc_msi_create_irq_domain'
Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: German Rivera <German.Rivera@freescale.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/bus/fsl-mc/fsl-mc-allocator.c:271: warning: Function parameter or member 'new_mc_adev' not described in 'fsl_mc_object_allocate'
drivers/bus/fsl-mc/fsl-mc-allocator.c:271: warning: Excess function parameter 'new_mc_dev' description in 'fsl_mc_object_allocate'
drivers/bus/fsl-mc/fsl-mc-allocator.c:417: warning: Function parameter or member 'mc_bus_dev' not described in 'fsl_mc_cleanup_irq_pool'
drivers/bus/fsl-mc/fsl-mc-allocator.c:417: warning: expecting prototype for Teardown the interrupt pool associated with an fsl(). Prototype was for fsl_mc_cleanup_irq_pool() instead
drivers/bus/fsl-mc/fsl-mc-allocator.c:443: warning: Function parameter or member 'mc_dev' not described in 'fsl_mc_allocate_irqs'
drivers/bus/fsl-mc/fsl-mc-allocator.c:443: warning: expecting prototype for Allocate the IRQs required by a given fsl(). Prototype was for fsl_mc_allocate_irqs() instead
drivers/bus/fsl-mc/fsl-mc-allocator.c:586: warning: Function parameter or member 'mc_dev' not described in 'fsl_mc_allocator_probe'
drivers/bus/fsl-mc/fsl-mc-allocator.c:618: warning: Function parameter or member 'mc_dev' not described in 'fsl_mc_allocator_remove'
Cc: Stuart Yoder <stuyoder@gmail.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-6-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/bus/fsl-mc/dprc-driver.c:360: warning: Function parameter or member 'alloc_interrupts' not described in 'dprc_scan_container'
drivers/bus/fsl-mc/dprc-driver.c:383: warning: Function parameter or member 'irq_num' not described in 'dprc_irq0_handler'
drivers/bus/fsl-mc/dprc-driver.c:383: warning: Excess function parameter 'irq' description in 'dprc_irq0_handler'
drivers/bus/fsl-mc/dprc-driver.c:394: warning: Function parameter or member 'irq_num' not described in 'dprc_irq0_handler_thread'
drivers/bus/fsl-mc/dprc-driver.c:394: warning: Excess function parameter 'irq' description in 'dprc_irq0_handler_thread'
Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: German Rivera <German.Rivera@freescale.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-5-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/bus/fsl-mc/dprc.c:345: warning: Function parameter or member 'attr' not described in 'dprc_get_attributes'
drivers/bus/fsl-mc/dprc.c:521: warning: Function parameter or member 'obj_type' not described in 'dprc_get_obj_region'
Cc: Stuart Yoder <stuyoder@gmail.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/bus/fsl-mc/fsl-mc-bus.c:30: warning: expecting prototype for Default DMA mask for devices on a fsl(). Prototype was for FSL_MC_DEFAULT_DMA_MASK() instead
drivers/bus/fsl-mc/fsl-mc-bus.c:45: warning: Function parameter or member 'fsl_mc_regs' not described in 'fsl_mc'
drivers/bus/fsl-mc/fsl-mc-bus.c:124: warning: Function parameter or member 'dev' not described in 'fsl_mc_bus_uevent'
drivers/bus/fsl-mc/fsl-mc-bus.c:124: warning: Function parameter or member 'env' not described in 'fsl_mc_bus_uevent'
drivers/bus/fsl-mc/fsl-mc-bus.c:480: warning: Function parameter or member 'mc_driver' not described in '__fsl_mc_driver_register'
drivers/bus/fsl-mc/fsl-mc-bus.c:480: warning: Function parameter or member 'owner' not described in '__fsl_mc_driver_register'
drivers/bus/fsl-mc/fsl-mc-bus.c:511: warning: Function parameter or member 'mc_driver' not described in 'fsl_mc_driver_unregister'
drivers/bus/fsl-mc/fsl-mc-bus.c:571: warning: Function parameter or member 'dev' not described in 'fsl_mc_get_root_dprc'
drivers/bus/fsl-mc/fsl-mc-bus.c:571: warning: Function parameter or member 'root_dprc_dev' not described in 'fsl_mc_get_root_dprc'
drivers/bus/fsl-mc/fsl-mc-bus.c:739: warning: Function parameter or member 'dev' not described in 'fsl_mc_is_root_dprc'
drivers/bus/fsl-mc/fsl-mc-bus.c:767: warning: Function parameter or member 'obj_desc' not described in 'fsl_mc_device_add'
drivers/bus/fsl-mc/fsl-mc-bus.c:767: warning: Function parameter or member 'mc_io' not described in 'fsl_mc_device_add'
drivers/bus/fsl-mc/fsl-mc-bus.c:767: warning: Function parameter or member 'parent_dev' not described in 'fsl_mc_device_add'
drivers/bus/fsl-mc/fsl-mc-bus.c:767: warning: Function parameter or member 'new_mc_dev' not described in 'fsl_mc_device_add'
drivers/bus/fsl-mc/fsl-mc-bus.c:767: warning: expecting prototype for Add a newly discovered fsl(). Prototype was for fsl_mc_device_add() instead
drivers/bus/fsl-mc/fsl-mc-bus.c:1066: warning: Function parameter or member 'pdev' not described in 'fsl_mc_bus_probe'
drivers/bus/fsl-mc/fsl-mc-bus.c:1190: warning: Function parameter or member 'pdev' not described in 'fsl_mc_bus_remove'
Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: German Rivera <German.Rivera@freescale.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-3-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/bus/fsl-mc/mc-sys.c:20: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/bus/fsl-mc/mc-sys.c:151: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/bus/fsl-mc/mc-sys.c:197: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/bus/fsl-mc/mc-sys.c:237: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Stuart Yoder <stuyoder@gmail.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/bus/fsl-mc/mc-io.c:53: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/bus/fsl-mc/mc-io.c:126: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Stuart Yoder <stuyoder@gmail.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-1-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some small misc driver fixes for 5.13-rc6 that fix some
reported problems:
- Tiny phy driver fixes for reported issues
- rtsx regression for when the device suspended
- mhi driver fix for a use-after-free
All of these have been in linux-next for a few days with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYMTXVw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynzLgCgpTYm7sEdpzqTZtJXupSP05Kqm5gAn3PhELhK
ZPnUMX9OPV9DPnJ9camz
=ApcR
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small misc driver fixes for 5.13-rc6 that fix some
reported problems:
- Tiny phy driver fixes for reported issues
- rtsx regression for when the device suspended
- mhi driver fix for a use-after-free
All of these have been in linux-next for a few days with no reported
issues"
* tag 'char-misc-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG
bus: mhi: pci-generic: Fix hibernation
bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove()
bus: mhi: pci_generic: T99W175: update channel name from AT to DUN
phy: Sparx5 Eth SerDes: check return value after calling platform_get_resource()
phy: ralink: phy-mt7621-pci: drop 'of_match_ptr' to fix -Wunused-const-variable
phy: ti: Fix an error code in wiz_probe()
phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init()
phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe()
phy: usb: Fix misuse of IS_ENABLED
This patch fixes crash after resuming from hibernation. The issue
occurs when mhi stack is builtin and so part of the 'restore-kernel',
causing the device to be resumed from 'restored kernel' with a no
more valid context (memory mappings etc...) and leading to spurious
crashes.
This patch fixes the issue by implementing proper freeze/restore
callbacks.
Link: https://lore.kernel.org/r/1622571445-4505-1-git-send-email-loic.poulain@linaro.org
Reported-by: Shujun Wang <wsj20369@163.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210606153741.20725-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.
Link: https://lore.kernel.org/r/20210413160318.2003699-1-weiyongjun1@huawei.com
Fixes: 8562d4fe34 ("mhi: pci_generic: Add health-check")
Cc: stable <stable@vger.kernel.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Hemant kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210606153741.20725-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to MHI v1.1 specification, change the channel name of T99W175
from "AT" to "DUN" (Dial-up networking) for both channel 32 and 33,
so that the channels can be bound to the Qcom WWAN control driver, and
device node such as /dev/wwan0p3DUN will be generated, which is very useful
for debugging modem
Link: https://lore.kernel.org/r/20210429014226.21017-1-jarvis.w.jiang@gmail.com
[mani: changed the dev node to /dev/wwan0p3DUN]
Fixes: aac426562f ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Jarvis Jiang <jarvis.w.jiang@gmail.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210606153741.20725-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/bus/qcom-ebi2.c:112: warning: Function parameter or member 'slow_cfg' not described in 'cs_data'
drivers/bus/qcom-ebi2.c:112: warning: Function parameter or member 'fast_cfg' not described in 'cs_data'
Reviewed-by: Linus Walleij <linus.walleij@linaro.org
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210526081038.544942-8-lee.jones@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Looks like the swsup_sidle_act quirk handling is unreliable for serial
ports. The serial ports just eventually stop idling until woken up and
re-idled again. As the serial port not idling blocks any deeper SoC idle
states, it's adds an annoying random flakeyness for power management.
Let's just switch to swsup_sidle quirk instead like we already do for
omap3 uarts. This means we manually idle the port instead of trying to
use the hardware autoidle features when not in use.
For more details on why the serial ports have been using swsup_idle_act,
see commit 66dde54e97 ("ARM: OMAP2+: hwmod-data: UART IP needs software
control to manage sidle modes"). It seems that the swsup_idle_act quirk
handling is not enough though, and for example the TI Android kernel
changed to using swsup_sidle with commit 77c34c84e1e0 ("OMAP4: HWMOD:
UART1: disable smart-idle.").
Fixes: b4a9a7a389 ("bus: ti-sysc: Handle swsup idle mode quirks")
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Ivan Jelincic <parazyd@dyne.org>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
On am335x, suspend and resume only works once, and the system hangs if
suspend is attempted again. However, turns out suspend and resume works
fine multiple times if the USB OTG driver for musb controller is loaded.
The issue is caused my the interconnect target module losing context
during suspend, and it needs a restore on resume to be reconfigure again
as debugged earlier by Dave Gerlach <d-gerlach@ti.com>.
There are also other modules that need a restore on resume, like gpmc as
noted by Dave. So let's add a common way to restore an interconnect
target module based on a quirk flag. For now, let's enable the quirk for
am335x otg only to fix the suspend and resume issue.
As gpmc is not causing hangs based on tests with BeagleBone, let's patch
gpmc separately. For gpmc, we also need a hardware reset done before
restore according to Dave.
To reinit the modules, we decouple system suspend from PM runtime. We
replace calls to pm_runtime_force_suspend() and pm_runtime_force_resume()
with direct calls to internal functions and rely on the driver internal
state. There no point trying to handle complex system suspend and resume
quirks via PM runtime.
This is issue should have already been noticed with commit 1819ef2e2d
("bus: ti-sysc: Use swsup quirks also for am335x musb") when quirk
handling was added for am335x otg for swsup. But the issue went unnoticed
as having musb driver loaded hides the issue, and suspend and resume works
once without the driver loaded.
Fixes: 1819ef2e2d ("bus: ti-sysc: Use swsup quirks also for am335x musb")
Suggested-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Naresh Kamboju <naresh.kamboju@linaro.org> reported that Beaglebone-X15
does not detect sata drives any longer after dra7 was flipped to boot with
device tree data only. Turns out we are now missing the sata related quirk
flags in ti-sysc that we used to have earlier.
Fixes: 98feab31ac ("ARM: OMAP2+: Drop legacy platform data for dra7 sata")
Fixes: 21206c8f2c ("ARM: OMAP2+: Drop legacy platform data for omap5 sata")
Link: https://lore.kernel.org/regressions/CA+G9fYtTN6ug3eBAW3wMcDeESUo+ebj7L5HBe5_fj4uqDExFQg@mail.gmail.com/
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Updates for SoC specific drivers include a few subsystems that
have their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance optimized
for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target module
has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid
issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as we
now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and dra7
- omap-prm driver needs to enable autoidle retention support for omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of using
builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=iidq
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance
optimized for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target
module has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
avoid issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as
we now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for
omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of
using builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"
* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: aspeed: fix a ternary sign expansion bug
memory: mtk-smi: Add device-link between smi-larb and smi-common
memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
clk: socfpga: fix iomem pointer cast on 64-bit
soc: aspeed: Adapt to new LPC device tree layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
ARM: dts: Remove LPC BMC and Host partitions
dt-bindings: aspeed-lpc: Remove LPC partitioning
soc: fsl: enable acpi support in RCPM driver
soc: qcom: mdt_loader: Detect truncated read of segments
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: pdr: Fix error return code in pdr_register_listener
firmware: qcom_scm: Fix kernel-doc function names to match
firmware: qcom_scm: Suppress sysfs bind attributes
firmware: qcom_scm: Workaround lack of "is available" call on SC7180
firmware: qcom_scm: Reduce locking section for __get_convention()
firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
...
Almost all SoC code changes this time are for the TI OMAP
platform, which continues its decade-long quest to move from
describing a complex SoC in code to device tree.
Aside from this, the Uniphier platform has a new maintainer
and some platforms have minor bugfixes and cleanups that were
not urgent enough for v5.12.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmCC2JoACgkQmmx57+YA
GNk2jg/9HPrMBjoxNMEynsN066Dnc3AVBG8veYAigS0mJuMX3HzUqp+RNn5YxEak
0SKWgocjawi5MjtuCRmM/BO0SY4wPUMOxnqx/AE4q3u6VVpfx+XJu+1bywAx7UFC
FnqstmqFAfJDLJUe4Pfv4SuXRJYyGKBoEdRK9Xr13qSstQ1gm4ccWbtRStWCcVvv
f4J0gPK0dw99lgbCOLbrBMfz1zuxCwhILg+qZ0+WPl9NNfxurQ2+/Cj/8P/L0IH+
BoiZ5NaISWnvlBWaSTh6P7d3omhbA149CPjybUy2b/s84oNHdm7XLpwymVp941zt
sM3gBIi7UDKMfXUrjWDZAXY06MZa/62BLCHQ2Fx+A1ve9TC0AqmSmUxhB4Z8xXs2
3U97kZnTAPX9Scno9k7eDXbVXKVzlDL8zdZtGvY56x/EiAiPSJaTcaU6puNgdF9z
7IPFKdpMbePcxHN03dC17B4HYVoSTp2gCadOSRSrBmVjAoswzYKoAOHrzibCwUzI
knbsShhJe/BtxvLJ7e/hq0YZBTTZXUcX/3Iuw6C+j+9l9Cod/JhYOoHQM7gvqHv6
JRz0Wt9IrMhYBMYlf0g8zHZa7IUDAq7k6x8XwLjK/M/WdeS2tI3+Cmt5ePhlgZVb
eBPzikxcvglDojE7zTkBeC/+jlpolWQ6UfRnptSvkof1DWVPkiE=
=YFEX
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"Almost all SoC code changes this time are for the TI OMAP platform,
which continues its decade-long quest to move from describing a
complex SoC in code to device tree.
Aside from this, the Uniphier platform has a new maintainer and some
platforms have minor bugfixes and cleanups that were not urgent enough
for v5.12"
* tag 'arm-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
MAINTAINERS: Update ARM/UniPhier SoCs maintainers and status
mailmap: Update email address for Nicolas Saenz
MAINTAINERS: Update BCM2711/BCM2335 maintainer's mail
ARM: exynos: correct kernel doc in platsmp
ARM: hisi: use the correct HiSilicon copyright
ARM: ux500: make ux500_cpu_die static
ARM: s3c: Use pwm_get() in favour of pwm_request() in RX1950
ARM: OMAP1: fix incorrect kernel-doc comment syntax in file
ARM: OMAP2+: fix incorrect kernel-doc comment syntax in file
ARM: OMAP2+: Use DEFINE_SPINLOCK() for spinlock
ARM: at91: pm: Move prototypes to mutually included header
ARM: OMAP2+: use true and false for bool variable
ARM: OMAP2+: add missing call to of_node_put()
ARM: OMAP2+: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
ARM: imx: Kconfig: Fix typo in help
ARM: mach-imx: Fix a spelling in the file pm-imx5.c
bus: ti-sysc: Warn about old dtb for dra7 and omap4/5
ARM: OMAP2+: Stop building legacy code for dra7 and omap4/5
ARM: OMAP2+: Drop legacy platform data for omap5 hwmod
ARM: OMAP2+: Drop legacy platform data for omap5 l3
...
Here is the big set of various smaller driver subsystem updates for
5.13-rc1.
Major bits in here are:
- habanalabs driver updates
- hwtracing driver updates
- interconnect driver updates
- mhi driver updates
- extcon driver updates
- fpga driver updates
- new binder features added
- nvmem driver updates
- phy driver updates
- soundwire driver updates
- smaller misc and char driver fixes and updates.
- bluetooth driver bugfix that maintainer wanted to go through
this tree.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYIa0CQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylQ/QCgwLQleU5hH/iQwxbHgNL5GawNUroAmwZtxILF
1r6zjmGi0Ak4oFBf7A0T
=Rrl6
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of various smaller driver subsystem updates for
5.13-rc1.
Major bits in here are:
- habanalabs driver updates
- hwtracing driver updates
- interconnect driver updates
- mhi driver updates
- extcon driver updates
- fpga driver updates
- new binder features added
- nvmem driver updates
- phy driver updates
- soundwire driver updates
- smaller misc and char driver fixes and updates.
- bluetooth driver bugfix that maintainer wanted to go through this
tree.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
bluetooth: eliminate the potential race condition when removing the HCI controller
coresight: etm-perf: Fix define build issue when built as module
phy: Revert "phy: ti: j721e-wiz: add missing of_node_put"
phy: ti: j721e-wiz: Add missing include linux/slab.h
phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove()
stm class: Use correct UUID APIs
intel_th: pci: Add Alder Lake-M support
intel_th: pci: Add Rocket Lake CPU support
intel_th: Consistency and off-by-one fix
intel_th: Constify attribute_group structs
intel_th: Constify all drvdata references
stm class: Remove an unused function
habanalabs/gaudi: Fix uninitialized return code rc when read size is zero
greybus: es2: fix kernel-doc warnings
mei: me: add Alder Lake P device id.
dw-xdata-pcie: Update outdated info and improve text format
dw-xdata-pcie: Fix documentation build warns
fbdev: zero-fill colormap in fbcmap.c
firmware: qcom-scm: Fix QCOM_SCM configuration
speakup: i18n: Switch to kmemdup_nul() in spk_msg_set()
...
core:
- Added support for Flash Programmer execution environment which allows the
host machine (like x86) to flash the modem firmware to NAND or eMMC in the
modem. The MHI bus will expose EDL channels (34, 35) and then the opensource
QDL tool [1] can be used to flash the firmware from the host.
- Added an internal helper for polling the MHI registers with a retry interval.
This helper is used now to poll for the MHI ready state in MHI STATUS
register.
- Various fixes for issues found during the bringup of SDX24/SDX55 based Quectel
and Telit modems.
- Updates to the Execution environment handling for proper downloading of the
AMSS image from SBL (Secondary Bootloader) mode.
- Added support for sending STOP channel command to the MHI device and also made
changes to the MHI core for proper handling of stop and restart.
- Fixed the runtime_pm handling in the core by forcing the device to be in wake
mode until TX completion and allowing it to suspend for RX.
- Added sanity checks for values read from the device to avoid crash if those
are corrupted somehow.
- Fixed warnings generated by sparse (W=2)
- Couple of kernel doc cleanups in mhi.h
pci_generic:
- Added support for runtime PM and generic PM
- Added Firehose channels for flashing the firmware
- Added support for modems such as Quectel EM1XXGR-L, SDX24, SDX65, Foxconn
T99W175 exposing relevant channels.
[1] https://git.linaro.org/landing-teams/working/qualcomm/qdl.git
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmByjAUACgkQVZ8R5v6R
zvXcgQf/cmZ+E7DUXfIutbtxu0WQsprLoi12Z+tNy+0di/6HbstodNYsDJGEMCeg
f5mXClHMTj6uO5aRu+5tgWxA6pNNBeHSpJmztbbxjrtdiAC1tZHXMFCMQ/Mj4Sv5
IFmfHVF/wsMdFJUkfaOWC45mVhPG/TK5Wng86CUSZXUdhgC0AxY0mQqmivTjS5UE
TA1zxCTS7ni97fceGM+V2JlebFYJJ+gwkVVgHhZMF0x+1xNldoNCxjSfMso6EeS1
ThK8bjxYYi/eRcM1jltdv/zWlJbePOTSos5Pkm+NQsauPWtETELKq58MDhLTzD28
aiQ8mx10gsYDGXvXpfh3nsMN1pwOfg==
=lVaD
-----END PGP SIGNATURE-----
Merge tag 'mhi-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
MHI changes for v5.13
core:
- Added support for Flash Programmer execution environment which allows the
host machine (like x86) to flash the modem firmware to NAND or eMMC in the
modem. The MHI bus will expose EDL channels (34, 35) and then the opensource
QDL tool [1] can be used to flash the firmware from the host.
- Added an internal helper for polling the MHI registers with a retry interval.
This helper is used now to poll for the MHI ready state in MHI STATUS
register.
- Various fixes for issues found during the bringup of SDX24/SDX55 based Quectel
and Telit modems.
- Updates to the Execution environment handling for proper downloading of the
AMSS image from SBL (Secondary Bootloader) mode.
- Added support for sending STOP channel command to the MHI device and also made
changes to the MHI core for proper handling of stop and restart.
- Fixed the runtime_pm handling in the core by forcing the device to be in wake
mode until TX completion and allowing it to suspend for RX.
- Added sanity checks for values read from the device to avoid crash if those
are corrupted somehow.
- Fixed warnings generated by sparse (W=2)
- Couple of kernel doc cleanups in mhi.h
pci_generic:
- Added support for runtime PM and generic PM
- Added Firehose channels for flashing the firmware
- Added support for modems such as Quectel EM1XXGR-L, SDX24, SDX65, Foxconn
T99W175 exposing relevant channels.
[1] https://git.linaro.org/landing-teams/working/qualcomm/qdl.git
* tag 'mhi-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi: (49 commits)
bus: mhi: fix typo in comments for struct mhi_channel_config
bus: mhi: core: Fix shadow declarations
bus: mhi: pci_generic: Constify mhi_controller_config struct definitions
bus: mhi: pci_generic: Introduce Foxconn T99W175 support
bus: mhi: core: Sanity check values from remote device before use
bus: mhi: pci_generic: Add FIREHOSE channels
bus: mhi: pci_generic: Implement PCI shutdown callback
bus: mhi: Improve documentation on channel transfer setup APIs
bus: mhi: core: Remove __ prefix for MHI channel unprepare function
bus: mhi: core: Check channel execution environment before issuing reset
bus: mhi: core: Clear configuration from channel context during reset
bus: mhi: core: Hold device wake for channel update commands
bus: mhi: core: Update debug messages to use client device
bus: mhi: core: Improvements to the channel handling state machine
bus: mhi: core: Clear context for stopped channels from remove()
bus: mhi: core: Allow sending the STOP channel command
bus: mhi: pci_generic: Add SDX65 based modem support
bus: mhi: core: Remove pre_init flag used for power purposes
bus: mhi: pm: reduce PM state change verbosity
bus: mhi: core: Fix MHI runtime_pm behavior
...
Change my e-mail address to kabel@kernel.org, and fix my name in
non-code parts (add diacritical mark).
Link: https://lkml.kernel.org/r/20210325171123.28093-2-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit fixes below sparse warnings with W=2 about shadow
declarations:
drivers/bus/mhi/core/main.c: In function ‘parse_xfer_event’:
drivers/bus/mhi/core/main.c:667:17: warning: declaration of ‘flags’ shadows a previous local [-Wshadow]
667 | unsigned long flags;
| ^~~~~
drivers/bus/mhi/core/main.c:565:16: note: shadowed declaration is here
565 | unsigned long flags = 0;
| ^~~~~
drivers/bus/mhi/core/main.c: In function ‘mhi_process_ctrl_ev_ring’:
drivers/bus/mhi/core/main.c:856:23: warning: declaration of ‘new_state’ shadows a previous local [-Wshadow]
856 | enum mhi_pm_state new_state;
| ^~~~~~~~~
drivers/bus/mhi/core/main.c:837:19: note: shadowed declaration is here
837 | enum mhi_state new_state;
| ^~~~~~~~~
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
This introduces SC7280 and SM8350 support in the RPMH power-domain
driver, SC7280 support to the LLCC driver, SC7280 support tot he AOSS
QMP driver, cleanups to the RPMH driver and a few smaller fixes to the
SMEM, QMI and EBI2 drivers.
-----BEGIN PGP SIGNATURE-----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=sgiW
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for 5.13
This introduces SC7280 and SM8350 support in the RPMH power-domain
driver, SC7280 support to the LLCC driver, SC7280 support tot he AOSS
QMP driver, cleanups to the RPMH driver and a few smaller fixes to the
SMEM, QMI and EBI2 drivers.
* tag 'qcom-drivers-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
bus: qcom: Put child node before return
dt-bindings: firmware: scm: Add sc7280 support
soc: qcom: rpmh-rsc: Fold WARN_ON() into if condition
soc: qcom: rpmh-rsc: Loop over fewer bits in irq handler
soc: qcom: rpmh-rsc: Remove tcs_is_free() API
soc: qcom: smem: Update max processor count
soc: qcom: aoss: Add AOSS QMP support for SC7280
dt-bindings: soc: qcom: aoss: Add SC7280 compatible
soc: qcom: llcc: Add configuration data for SC7280
dt-bindings: arm: msm: Add LLCC for SC7280
soc: qcom: Fix typos in the file qmi_encdec.c
soc: qcom: rpmhpd: Add sc7280 powerdomains
dt-bindings: power: rpmpd: Add sc7280 to rpmpd binding
soc: qcom: rpmhpd: Add SM8350 power domains
dt-bindings: power: Add rpm power domain bindings for SM8350
Link: https://lore.kernel.org/r/20210404164951.713045-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
"mhi_controller_config" struct is not modified inside "mhi_pci_dev_info"
struct. So constify the instances.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for T99W175 modems, this modem series is based on SDX55
qcom chip. The modem is mainly based on MBIM protocol for both the
data and control path.
This patch adds support for below modems:
- T99W175(based on sdx55), Both for eSIM and Non-eSIM
- DW5930e(based on sdx55), With eSIM, It's also T99W175
- DW5930e(based on sdx55), Non-eSIM, It's also T99W175
This patch was tested with Ubuntu 20.04 X86_64 PC as host
Signed-off-by: Jarvis Jiang <jarvis.w.jiang@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408095524.3559-1-jarvis.w.jiang@gmail.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
When parsing the structures in the shared memory, there are values which
come from the remote device. For example, a transfer completion event
will have a pointer to the tre in the relevant channel's transfer ring.
As another example, event ring elements may specify a channel in which
the event occurred, however the specified channel value may not be valid
as no channel is defined at that index even though the index may be less
than the maximum allowed index. Such values should be considered to be
untrusted, and validated before use. If we blindly use such values, we
may access invalid data or crash if the values are corrupted.
If validation fails, drop the relevant event.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Link: https://lore.kernel.org/r/1615411855-15053-1-git-send-email-jhugo@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Deinit the device on shutdown to halt MHI/PCI operation on device
side. This change fixes floating device state with some hosts that
do not fully shutdown PCIe device when rebooting.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1616169037-7969-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The __mhi_unprepare_channel() API does not require the __ prefix.
Get rid of it and make the internal function consistent with the
other function names.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Link: https://lore.kernel.org/r/1617311778-1254-9-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
A client can attempt to unprepare certain channels for transfer even
after the execution environment they are supposed to run in has changed.
In the event that happens, the device need not be notified of the reset
and the host can proceed with clean up for the channel context and
memory allocated for it on the host as the device will no longer be able
to respond to such a request.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1617311778-1254-8-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
When clearing up the channel context after client drivers are
done using channels, the configuration is currently not being
reset entirely. Ensure this is done to appropriately handle
issues where clients unaware of the context state end up calling
functions which expect a context.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1617311778-1254-7-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
MHI host can fail early if device is in a bad state by attempting
to assert device wake and holding the runtime PM vote before
sending a channel update command instead of performing a wake
toggle and waiting for a timeout if the send were to fail. This
can help improve the design and enable shorter wait periods for
device to respond as votes are already held.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1617311778-1254-6-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Debug messages dealing with client devices use the generic MHI
controller or parent device along with a channel number. It would
be better to instead use the client device directly and enable
better log messages for channel updates.
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1617311778-1254-5-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Improve the channel handling state machine such that all commands
go through a common function and a validation process to ensure
that the state machine is not violated in any way and adheres to
the MHI specification. Using this common function allows MHI to
eliminate some unnecessary debug messages and code duplication.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1617311778-1254-4-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
If a channel was explicitly stopped but not reset and a driver
remove is issued, clean up the channel context such that it is
reflected on the device. This move is useful if a client driver
module is unloaded or a device crash occurs with the host having
placed the channel in a stopped state.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1617311778-1254-3-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support to allow sending the STOP channel command. If a
client driver would like to STOP a channel and have the device
retain the channel context instead of issuing a RESET to it and
clearing the context, this would provide support for it after
the ability to send this command is exposed to clients.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1617311778-1254-2-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Some controllers can choose to skip preparation for power up.
In that case, device context is initialized based on the pre_init
flag not being set during mhi_prepare_for_power_up(). There is no
reason MHI host driver should maintain and provide controllers
with two separate paths for preparing MHI.
Going forward, all controllers will be required to call the
mhi_prepare_for_power_up() API followed by their choice of sync
or async power up. This allows MHI host driver to get rid of the
pre_init flag and sets up a common way for all controllers to use
MHI. This also helps controllers fail early on during preparation
phase in some failure cases.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1617313309-24035-1-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Since M3 can be entered/exited quite a lot when used for runtime PM,
keep the mhi suspend/resume transitions quiet.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1617700315-12492-2-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
This change ensures that PM reference is always get during packet
queueing and released either after queuing completion (RX) or once
the buffer has been consumed (TX). This guarantees proper update for
underlying MHI controller runtime status (e.g. last_busy timestamp)
and prevents suspend to be triggered while TX packets are flying,
or before we completed update of the RX ring.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1617700315-12492-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Clang warns about the comparison when using a 32-bit phys_addr_t:
drivers/bus/mvebu-mbus.c:621:17: error: result of comparison of constant 4294967296 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (reg_start >= 0x100000000ULL)
Add a cast to shut up the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210323131952.2835509-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In certain devices, it is likely that there is no incoming MHI
interrupt for a transition to MHI READY state. One such example
is the move from Pass Through to an SBL or AMSS execution
environment. In order to facilitate faster bootup times as there
is no need to wait until timeout_ms completes, MHI host can poll
every 25 milliseconds to check if device has entered MHI READY
until a maximum timeout of twice the timeout_ms is reached.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1617215665-19593-3-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>