When the AP queue depth of requests was reached additional requests
have been ignored. These request are stuck in the request queue.
The AP queue handling now push the next waiting request into the
queue after fetching a previous serviced and finished reply.
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
ap_bus and zcrypt_api assumed module information to always be present
and initialisation to be done in module loading order (symbol
dependencies). These assumptions don't hold if zcrypt is built-in;
THIS_MODULE will be NULL in this case and init call order is linker
order, i.e. Makefile order.
Fix initialisation order by ordering the object files in the Makefile
according to their dependencies, like the module loader would do.
Fix message type registration by using a dedicated "name" field rather
than piggy-backing on the module ("owner") information. There's no
change to the requirement that module name and msgtype name are
identical. The existing name macros are used.
We don't need any special code for dealing with the drivers being
built-in; the generic module support code already does the right
thing.
Test results:
1. CONFIG_MODULES=y, CONFIG_ZCRYPT=y
KVM: boots, no /sys/bus/ap (expected)
LPAR with CEX5: boots, /sys/bus/ap/devices/card*/type present
2. CONFIG_MODULES=y, CONFIG_ZCRYPT=m=:
KVM: boots, loading zcrypt_cex4 (and ap) fails (expected)
LPAR with CEX5: boots, loading =zcrypt_cex4= succeeds,
/sys/bus/ap/devices/card*/type present after explicit module
loading
3. CONFIG_MODULES unset, CONFIG_ZCRYPT=y:
KVM: boots, no /sys/bus/ap (expected)
LPAR with CEX5: boots, /sys/bus/ap/devices/card*/type present
No further testing (user-space functionality) was done.
Fixes: 3b6245fd303f ("s390/zcrypt: Separate msgtype implementation from card modules.")
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
On systems without AP bus (e.g. KVM) the kernel crashes during init
calls when zcrypt is built-in:
kernel BUG at drivers/base/driver.c:153!
illegal operation: 0001 ilc:1 [#1] SMP
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.2.0+ #221
task: 0000000010a40000 ti: 0000000010a48000 task.ti:0000000010a48000
Krnl PSW : 0704c00180000000 0000000000592bd6(driver_register+0x106/0x140)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3
0000000000000012 0000000000000000 0000000000c45328 0000000000c44e30
00000000009ef63c 000000000067f598 0000000000cf3c58 0000000000000000
000000000000007b 0000000000cb1030 0000000000000002 0000000000000000
0000000000ca8580 0000000010306700 00000000001001d8 0000000010a4bd88
Krnl Code: 0000000000592bc6: f0b00004ebcf srp 4(12,%r0),3023(%r14),0
0000000000592bcc: f0a0000407f4 srp 4(11,%r0),2036,0
#0000000000592bd2: a7f40001 brc 15,592bd4
>0000000000592bd6: e330d0000004 lg %r3,0(%r13)
0000000000592bdc: c0200021edfd larl %r2,9d07d6
0000000000592be2: c0e500126d8f brasl %r14,7e0700
0000000000592be8: e330d0080004 lg %r3,8(%r13)
0000000000592bee: a7f4ffab brc 15,592b44
Call Trace:
([<00000000001001c8>] do_one_initcall+0x90/0x1d0)
[<0000000000c6dd34>] kernel_init_freeable+0x1e4/0x2a0
[<00000000007db53a>] kernel_init+0x2a/0x120
[<00000000007e8ece>] kernel_thread_starter+0x6/0xc
[<00000000007e8ec8>] kernel_thread_starter+0x0/0xc
Last Breaking-Event-Address:
[<0000000000592bd2>] driver_register+0x102/0x140
When zcrypt is built as a module, the module loader ensures that the
driver modules cannot be loaded if the AP bus module returns an error
during initialisation. But if zcrypt and the driver are built-in, the
driver is getting initialised even if the AP bus initialisation
failed. The driver invokes ap_driver_register() during initialisation,
which then causes operations on uninitialised data structures to be
performed.
Explicitly protect ap_driver_register() by introducing an
"initialised" flag that gets set iff the AP bus initialisation was
successful. When the AP bus initialisation failed,
ap_driver_register() will error out with -ENODEV, causing the driver
initialisation to fail as well.
Test results:
1. Inside KVM (no AP bus), zcrypt built-in
Boots. /sys/bus/ap not present (expected).
2. Inside KVM (no AP bus), zcrypt as module
Boots. Loading zcrypt_cex4 fails because loading ap_bus fails
(expected).
3. On LPAR with CEX5, zcrypt built-in
Boots. /sys/bus/ap/devices/card* present but .../card*/type missing
(i.e. zcrypt_device_register() fails, unrelated issue).
4. On LPAR with CEX5, zcrypt as module
Boots. Loading zcrypt_cex4 successful,
/sys/bus/ap/devices/card*/type present. No further testing
(user-space functionality) was done.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
There is a system work queue system_long_wq for long running work.
Use this work queue for the AP bus scan loop.
Reviewd-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Remove the code for really old crypt cards, PCICC and PCICA.
These cards have been out of service for several years.
Reviewd-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Replace the two fields 'unregistered' and 'reset' with a device
state with 5 possible values. Introduce two events for the AP devices,
device poll and device timeout. With the state machine it is easier
to deal with device initialization and suspend/resume. Device polling
is simpler as well, the arkane 'flags' passing is gone.
Reviewd-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
If a AP device is removed while messages are still pending, the requests
are cancelled by calling the message receive function with an error pointer
for the reply. The message type receive handler recognize this and create
a fake hardware error TYPE82_RSP_CODE / REP82_ERROR_MACHINE_FAILURE.
The message with the hardware error then causes a printk and a return
code of -EAGAIN.
Replace the intricate scheme with an explicit return code for this sitation
and avoid the error message.
Reviewd-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Set the configuration timer at the end of the ap_scan_bus function.
Make use of setup_timer and remove some unnecessary add_timer, mod_timer
and del_timer_sync calls. Replace the complicated timer_pending, mod_timer
and add_timer code in ap_config_time_store with a simple mod_timer.
Reviewd-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
If there are no devices on the AP bus there will not be a single
call to the per-device ap_bus_suspend function. Even worse,
there will not be a call to the per-device ap_bus_resume either
and the AP will fail so resume correctly.
Introduce a bus specific dev_pm_ops to suspend / resume the AP
bus related things. While we are at it, simplify the power management
code of the AP bus.
Reviewd-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The ap_queue_messsage function will call device_unregister if the
unregistered field of the device has been set while trying to queue
a message. This races with other device_unregister calls, e.g. from
the ap_scan_bus. Remove the call to device_unregister from
ap_queue_message and let ap_scan_bus deal with it.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The ap_query_configuration function allocates the ap_config_info
structure, but there is no code to free the structure.
Allocate the structure in the module_init function and free it
again in module_exit.
While we are at it simplify a few functions in regard to the
ap configuration data.
Reviewed-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
ap_test_queue, ap_query_facilities, __ap_query_functions all use
the same PQAP(TAPQ) command. Consolidate the three into a single
ap_test_queue function that returns the AP status and the 64-bit
result. The exception table entry for PQAP(TAPQ) can be avoided
if the T bit for the APFT facility is set only if test_facility(15)
indicated that the facility is present.
Integrate ap_query_function into ap_query queue to avoid calling
PQAP(TAPQ) twice.
Reviewed-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In the past only even modulus sizes were allowed for RSA keys in
CRT format. This restriction was based on limited RSA key generation
on older crypto adapters that provides only even modulus sizes. This
restriction is not valid any more.
Revoke restrictions that crypto requests can be serviced with odd
RSA modulus length in CRT format.
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
There is no need to busy loop and monopolize a cpu for up to ~2 seconds.
The code in question that calls mdelay() is preemptible anyway, so better
let the kernel schedule different processes than just looping and causing
unnecessary delays.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Set the 'quality' property in the zcrypt rng device structure to enable the
zcrypt hwrng device to take part in the kernel entropy seeding process.
A module parameter named hwrng_seed will be introduced to disable the
participation. By default this parameter is set to 1 (enabled).
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In case of request timeouts an AP queue reset will be triggered to
recover and reinitialize the AP queue. The previous behavior was an
immediate reset execution regardless of current/pending requests.
Due to newly changed firmware behavior the reset may be delayed, based
on the priority of pending request. The device driver's waiting time
frame was limited, hence it did not received the reset response. As a
consequence interrupts would not be enabled afterwards.
The RAPQ (queue reset) and AQIC (interrupt control) commands will be
treated fully asynchronous now. The device driver will check the reset and
interrupt states periodically, thus it can handle the reinitialization
properly.
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Added domain checking to prevent reset failures caused by invalid
domains.
Corrected removal sequence of bus attributes and device.
Reviewed-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The ap poll timer restart condition was wrong. Hence the poll timer
was not restarted reliable when setting a new time interval via the
poll_timeout sysfs attribute.
Added missing timer locking.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Given that the kernel now always runs in 64 bit mode, it is
pointless to check if the z/Architecture mode is active.
Remove the checks.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Remove the 31 bit support in order to reduce maintenance cost and
effectively remove dead code. Since a couple of years there is no
distribution left that comes with a 31 bit kernel.
The 31 bit kernel also has been broken since more than a year before
anybody noticed. In addition I added a removal warning to the kernel
shown at ipl for 5 minutes: a960062e58 ("s390: add 31 bit warning
message") which let everybody know about the plan to remove 31 bit
code. We didn't get any response.
Given that the last 31 bit only machine was introduced in 1999 let's
remove the code.
Anybody with 31 bit user space code can still use the compat mode.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Older machines with more then 16 domains need a special check before
PQAP instructions can be processed. With commit 5bc334bff9 this
check was reverted by accident. This patch re-establishes the additional
code needed for checking the extended domains for older machines.
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Extends the generic cryptographic device driver (zcrypt)
to support the Crypto Express 5S adapter.
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Upcoming versions of secure key management facilities (CCA and
EP11) require information about the maximum number of supported
ap domains in order to service TKE requests properly. With IBM
z13 the number of available domains (so far 16) has increased up
to 85. This number varies depending on machine types and models.
Therefore the new sysfs attribute 'ap_max_domain_id' provides
this limit of supported ap domains. Upcoming releases for CCA
and EP11 will use this new information. Without this problem fix
it is not possible to retrieve reliable information about the
maximum number of supported ap domains. Thus, customers are not
able to perform key management for CCA and EP11 coprocessor
adapters.
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Kernel oops caused by invalid parameter at TAPQ instruction:
On older systems where the QCI instruction is not available
all possible domains are probed via TAPQ instruction. The
range for the probe has been extended with the > 16 domain
support now leading to a possible specification exception
when this instruction is called for probing higher values
within the new range. This may happen during insmod and/or
ap bus reset only on machines without a QCI instruction (z10,
z196, z114), zEC12 and newer systems are not affected.
The fix modifies the domain checking function to limit the
allowed range if no QCI info is available.
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This prefixes all crypto module loading with "crypto-" so we never run
the risk of exposing module auto-loading to userspace via a crypto API,
as demonstrated by Mathias Krause:
https://lkml.org/lkml/2013/3/4/70
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The zcrypt device driver will accept the new crypto adapter
in toleration mode. A new sysfs attribute 'raw_hwtype' will
expose the raw hardware type.
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Extends the number of ap domains within the zcrypt device driver up to 256.
AP domains in the range 00..255 will be detected.
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Improve device probing process for zcrypt adapters to
transmit service request during registration process.
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This makes sure format strings can't accidentally leak into kernel
interface names.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Change the visibility of the module parameters ap_domain_index and
ap_thread_flag for the owner and the members of the owners group in
sysfs.
Previously the parameters where invisible due to a value of zero
as permissions parameter in the module_param_named macro.
Signed-off-by: Michael Veigel <veigel@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This feature extends the generic cryptographic device driver (zcrypt)
with a new capability to service EP11 requests for the Crypto Express4S
card in EP11 (Enterprise PKCS#11 mode) coprocessor mode.
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Refactor direct debug level comparisons with the (internal) s390db->level
member. Use the debug_level_enabled() function instead.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Let's get rid of another sparse false positive:
drivers/s390/crypto/ap_bus.c:416:64: warning:
cast truncates bits from constant value (102030405060708 becomes 5060708)
So instead of using a cast let's use an and-mask.
That way sparse remains silent and one doesn't always have to check
if this is a valid warning/bug or just a false positive.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
The zcrypt device driver has been split into base/bus module, api-module,
card modules and message type modules. The base module has been renamed
from z90crypt to ap.
A module alias (with the well-known z90crypt identifier) will be introduced
that enable users to use their existing way to load the zcrypt device driver.
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
There are three users of adapter interrupts: AP, QDIO and PCI. Each
registers a single adapter interrupt with independent ISCs. Define
a "struct airq" with the interrupt handler, a pointer and a mask for
the local summary indicator and the ISC for the adapter interrupt
source. Convert the indicator array with its fixed number of adapter
interrupt sources per ISE to an array of hlists. This removes the
limitation to 32 adapter interrupts per ISC and allows for arbitrary
memory locations for the local summary indicator.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The bus rescan process was called simultaneously on
every device failure. This finally leads into race
conditions (double device add/remove actions).
This patch protects the rescan area by mutual exclusion
and improves ap_config_timer handling
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Now that irq sum accounting for /proc/stat's "intr" line works again we
have the oddity that the sum field (first field) contains only the sum
of the second (external irqs) and third field (I/O interrupts).
The reason for that is that these two fields are already sums of all other
fields. So if we would sum up everything we would count every interrupt
twice.
This is broken since the split interrupt accounting was merged two years
ago: 052ff461c8 "[S390] irq: have detailed
statistics for interrupt types".
To fix this remove the split interrupt fields from /proc/stat's "intr"
line again and only have them in /proc/interrupts.
This restores the old behaviour, seems to be the only sane fix and mimics
a behaviour from other architectures where /proc/interrupts also contains
more than /proc/stat's "intr" line does.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The message request handling (type50 - clear key) for RSA operations
(in CRT format) are now handled correctly with respect to the crb
format container.
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Remove duplicated include.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Get rid of this compile warning for CONFIG_32BIT:
drivers/s390/crypto/ap_bus.c:168:12: warning: ‘ap_configuration_available’
defined but not used [-Wunused-function]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Detect external AP bus configuration changes and request
an AP device rescan.
Signed-off-by: Holger Dengler <hd@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Ingo Tuchscherer