Add new RF tuner gain control named RF Gain. That is aimed for first
amplifier chip right after antenna connector.
There is existing LNA Gain control, which is quite same, but it is
aimed for cases amplifier is integrated to tuner chip. Some designs
have both, as almost all recent tuner silicons has integrated LNA/RF
amplifier in any case.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
SDR receiver has ADC (Analog-to-Digital Converter) and SDR transmitter
has DAC (Digital-to-Analog Converter). Originally I though it could
be good idea to have own type for receiver and transmitter, but now I
feel one common type for SDR is enough. So lets rename it.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: this was added in 4.4, so update 4.2 to 4.4]
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The vivid_fb_ioctl() code fails to initialize the 16 _reserved bytes of
struct fb_vblank after the ->hcount member. Add an explicit
memset(0) before filling the structure to avoid the info leak.
Signed-off-by: Salva Peiró <speirofr@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Prepare to divide videobuf2
- Separate vb2 trace events from v4l2 trace event.
- Make wrapper functions that will move to v4l2-side.
- Make vb2_core_* functions that will remain in core-side.
- Add a callback function table for buffer operation which makes vb2-core
to be able to invoke a v4l2-side functions.
- Rename internal functions as vb2_*.
Signed-off-by: Junghak Sung <jh1009.sung@samsung.com>
Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com>
Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Replace struct v4l2_format * with void * to make queue_setup()
for common use.
And then, modify all device drivers related with this change.
Signed-off-by: Junghak Sung <jh1009.sung@samsung.com>
Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com>
Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: fix missing const in fimc-lite.c]
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
MFC driver never delivered EOS event to apps feeding constantly its capture
buffer with fresh buffers. The patch fixes it by marking last buffers
returned by MFC with MFC_BUF_FLAG_EOS flag and firing EOS event on
de-queuing such buffers.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
MFC encoder supports end-of-stream handling for encoder
in version 5 of hardware. This patch adds it also for newer version.
It was successfully tested on MFC-v8.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
In videobuf2 dma-sg memory types the prepare and finish ops, instead
of passing the number of entries in the original scatterlist as the
"nents" parameter to dma_sync_sg_for_device() and dma_sync_sg_for_cpu(),
the value returned by dma_map_sg() was used. Albeit this has been
suggested in comments of some implementations (which have since been
corrected), this is wrong.
Fixes: d790b7eda9 ("vb2-dma-sg: move dma_(un)map_sg here")
Cc: stable@vger.kernel.org # for v3.19 and up
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
In videobuf2 dma-contig memory type the prepare and finish ops, instead of
passing the number of entries in the original scatterlist as the "nents"
parameter to dma_sync_sg_for_device() and dma_sync_sg_for_cpu(), the value
returned by dma_map_sg() was used. Albeit this has been suggested in
comments of some implementations (which have since been corrected), this
is wrong.
Fixes: 199d101efd ("v4l: vb2-dma-contig: add prepare/finish to dma-contig allocator")
Cc: stable@vger.kernel.org # for v3.8 and up
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The I2C core always reports the MODALIAS uevent as "i2c:<client name"
regardless if the driver was matched using the I2C id_table or the
of_match_table. So technically there's no need for a driver to export
the OF table since currently it's not used.
In fact, the I2C device ID table is mandatory for I2C drivers since
a i2c_device_id is passed to the driver's probe function even if the
I2C core used the OF table to match the driver.
And since the I2C core uses different tables, OF-only drivers needs to
have duplicated data that has to be kept in sync and also the dev node
compatible manufacturer prefix is stripped when reporting the MODALIAS.
To avoid the above, the I2C core behavior may be changed in the future
to not require an I2C device table for OF-only drivers and report the
OF module alias. So, it's better to also export the OF table to prevent
breaking module autoloading if that happens.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Now that the Demux kABI is documented at device-drivers.xml,
remove it from the API docbook.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There are several stuff at media's kdapi.xml that don't
belong there, as it documents the Kernel internal ABI, and
not the userspace API.
Add the documentation here. The hole kdapi.xml will be
removed on a latter patch, after we finish documenting
what's there at the proper places.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
While we can't document #defines, documenting enums are
well supported by kernel-doc. So, convert the bitmap defines
into an enum.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The usage of #define at the kABI is fine, but it doesn't
allow adding a proper description. As those defines deserve
a proper documentation, let's convert them into an enum and
document them at device-drivers DocBook.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The dvb/kdapi.tmpl has already an extensive documentation about
this callback. Now that we've added function typedefs at kernel-doc,
add such documentation at demux.h, for it to appear at device-drivers
DocBook.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The dvb/kdapi.tmpl has already an extensive documentation about
this callback. Now that we've added function typedefs at kernel-doc,
add such documentation at demux.h, for it to appear at device-drivers
DocBook.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
A typedef function looks more likely a function and not a
normal typedef. Change the code to use the output_function_*,
in order to properly parse the function prototype parameters.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The current typedef parser only works for non-function typedefs.
As we need to also document some function typedefs, add a
parser for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There are lots of CodingStyle violations here. Now that we're
touching a log on this header files, adding the documentation
here, make sure that this will follow the Kernel CodingStyle.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The DVB core has a provision for other frontend sources, but no
drivers use it. The kdapi.xml contains provision for some other
frontend source types, but it is not in sync with the code.
So, remove the unused types and sync both files.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This enum is not actually used anymore. The only value used from
the enum is DMX_OK, passed as a parameter on two callbacks.
Yet, this value is not used anywhere. So, just remove it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There are two callbacks still not documented:
.//drivers/media/dvb-core/demux.h:422: warning: No description found for parameter 'get_pes_pids'
.//drivers/media/dvb-core/demux.h:422: warning: No description found for parameter 'get_stc'
The purpose of first one is clear. The second one is used only
on the obsolete av7110 driver, and its purpose is not clear,
as it just returns a 64-bit word from the firmware to userspace.
Let's document get_pes_pids and mark get_stc as private, adding
a comment to not use it, while this is not documented.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There are two DVB demux callbacks and ioctls that aren't documented
and aren't used at all by the DVB core or by any DVB driver upstream.
Let's comment out the code for those two ioctls and remove on some
future version.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There are a few inconsistencies between the old documentation
that got imported into the header and the current status.
Update them, and use the proper doc-nano nomenclature for
struct artuments "@", instead of foo().
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The DocBook/media/dvb/kdapi.xml contains the description of
the kABI for DVB. The problem is that, by being maintained
on a separate file and not being updated for years, it got
outdated. So, for example, some callback parameters were
changed, but the DocBook were still using the old stuff.
As a first step to fix it, let's move the documentation of
struct dmx_demux into demux.h and fix the parameters used
there.
For now, don't document any other field nor touch the
descriptions that got moved, letting this job to other
patches. That makes easier to review the patch.
PS.: Please notice that an additional patch will be needed
in order to fix the return values (some uses non-existent
return codes) and to the functions and callbacks mentioned at
the descriptions.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There are several CodingStyle violations at the DVB code. While
we won't be fixing them as a hole, let's fix at least the
headers, as we're touching on them already in order to properly
document them.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This struct is already documented at the header file, but it is
not using Kernel doc-nano format. Convert to it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The struct lirc_driver is already documented, but on some
internal format. Convert it to Kernel doc-nano format and
add documentation for some additional parameters that are
also present at the structure.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This header declares the code and structures used to parse
Hauppauge eeproms. As this is part of the V4L2 common, and
used by several drivers, let's properly document it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The tuner-types.h is part of the V4L2 core and should be
touched for every new tuner added. So, it deserves to be
documented at the device-drivers DocBook.
Add it to device-drivers.tmpl and add descriptions for
enum param_type and struct tuner_range.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The struct tuner_params is almost fully documented, but
using a non-standard way. Convert it to doc-nano format,
and add descriptions for the parameters that aren't
documented yet.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Remove some bad whitespaces before tabs and fix the initial
comment to be compliant with Kernel coding style.
Now, the only complains are about long comment lines at the
defines. Those warnings should be ok to be kept.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This is part of the V4L2 core, so its kABI should be
documented at device-drivers DocBook.
Add the meta-tags for that.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Right now, "private:" tag should be lower-case, otherwise the
scripts/kernel-doc won't do the right thing.
Also, no fields after "private:" should be documented. As we don't
want to strip the documentation, let's untag. This way, it will
be seen only at the file, and not at the DocBooks.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This saves a little .text and removes the sizeof(...) style
inconsistency. Use sizeof(*state) in accordance with CodingStyle.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/i2c/ml86v7667.c:430:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
CC: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The vivid driver currently has a hard-coded limit of 64 devices,
however there's nothing that prevents the creation of even more devices.
This commit adds a new driver option (which defaults to 64) to
allow this maximum number to be configurable.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
When the diver is removed and all the resources are deallocated,
we should be iterating through the created devices only.
Currently, the iteration ends when vivid_devs[i] is NULL. Since
the array contains VIVID_MAX_DEVS elements, it will oops if
n_devs=VIVID_MAX_DEVS because in that case, no element is NULL.
Fixes: c88a96b023 ('[media] vivid: add core driver code')
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The function can return negative value.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The function can return negative value.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The function can return negative value.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Adds Terratec H7 Rev. 4 with USB id 0ccd:10a5 to DVBSky driver.
Signed-off-by: Erik Andresen <erik@vontaene.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fix non-tab indentation.
This resolves the following checkpatch problem:
ERROR: code indent should use tabs where possible
[mchehab@osg.samsung.com: remove a hunk already applyed by some other patch]
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari