DM_BUFIO_CLIENT_NO_SLEEP flag to have dm-bufio use spinlock rather
than mutex for its locking.
- Add optional "try_verify_in_tasklet" feature to DM verity target.
This feature gives users the option to improve IO latency by using a
tasklet to verify, using hashes in bufio's cache, rather than wait
to schedule a work item via workqueue. But if there is a bufio cache
miss, or an error, then the tasklet will fallback to using workqueue.
- Incremental changes to both dm-bufio and the DM verity target to use
jump_label to minimize cost of branching associated with the niche
"try_verify_in_tasklet" feature. DM-bufio in particular is used by
quite a few other DM targets so it doesn't make sense to incur
additional bufio cost in those targets purely for the benefit of
this niche verity feature if the feature isn't ever used.
- Optimize verity_verify_io, which is used by both workqueue and
tasklet based verification, if FEC is not configured or tasklet
based verification isn't used.
- Remove DM verity target's verify_wq's use of the WQ_CPU_INTENSIVE
flag since it uses WQ_UNBOUND. Also, use the WQ_HIGHPRI flag if
"try_verify_in_tasklet" is specified.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmLtYU0ACgkQxSPxCi2d
A1pIDwgAjQi7jSxN7n+Fb4sJLL5x3WvuVGcockIkucj+Pvr3nvijwkf27+kbCWhn
d4bDhA60gCebd87lf2PZTf8LL2+h9SLzFDTrgBVg5eC4O8aoQNrgwMMKVvYn+MmK
OShurwHXS/7iqCETFaUA7hVtH/NwSWzP7WL5+QIDVOWVGaTLnqdvA4TYSZnljEg2
c02bL2KK+ndsYYshDq7HnVuqr4hIBWKF6y0lApU42mfTCnghX8ZnUMG9pO9K+20X
qVfQH58CjOTP0MaHsddyR1sTKKZ1qY1HdoDhnlMVfZD5XqnCMhzefKoMxbxJKmJ3
7hS5w2tNxSx4yYWGj3dXHKhEZi0buA==
=ZBi4
-----END PGP SIGNATURE-----
Merge tag 'for-6.0/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull more device mapper updates from Mike Snitzer:
- Add flags argument to dm_bufio_client_create and introduce
DM_BUFIO_CLIENT_NO_SLEEP flag to have dm-bufio use spinlock rather
than mutex for its locking.
- Add optional "try_verify_in_tasklet" feature to DM verity target.
This feature gives users the option to improve IO latency by using a
tasklet to verify, using hashes in bufio's cache, rather than wait to
schedule a work item via workqueue. But if there is a bufio cache
miss, or an error, then the tasklet will fallback to using workqueue.
- Incremental changes to both dm-bufio and the DM verity target to use
jump_label to minimize cost of branching associated with the niche
"try_verify_in_tasklet" feature. DM-bufio in particular is used by
quite a few other DM targets so it doesn't make sense to incur
additional bufio cost in those targets purely for the benefit of this
niche verity feature if the feature isn't ever used.
- Optimize verity_verify_io, which is used by both workqueue and
tasklet based verification, if FEC is not configured or tasklet based
verification isn't used.
- Remove DM verity target's verify_wq's use of the WQ_CPU_INTENSIVE
flag since it uses WQ_UNBOUND. Also, use the WQ_HIGHPRI flag if
"try_verify_in_tasklet" is specified.
* tag 'for-6.0/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm verity: have verify_wq use WQ_HIGHPRI if "try_verify_in_tasklet"
dm verity: remove WQ_CPU_INTENSIVE flag since using WQ_UNBOUND
dm verity: only copy bvec_iter in verity_verify_io if in_tasklet
dm verity: optimize verity_verify_io if FEC not configured
dm verity: conditionally enable branching for "try_verify_in_tasklet"
dm bufio: conditionally enable branching for DM_BUFIO_CLIENT_NO_SLEEP
dm verity: allow optional args to alter primary args handling
dm verity: Add optional "try_verify_in_tasklet" feature
dm bufio: Add DM_BUFIO_CLIENT_NO_SLEEP flag
dm bufio: Add flags argument to dm_bufio_client_create
Add a flags argument to dm_bufio_client_create and update all the
callers. This is in preparation to add the DM_BUFIO_NO_SLEEP flag.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Combine the request operation type and request flags into a single
argument. Improve static type checking by using the enum req_op type for
variables that represent a request operation and the new blk_opf_t type for
variables that represent request flags.
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-27-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Combine the bi_op and bi_op_flags into the bi_opf member. Use the new
blk_opf_t type to improve static type checking. This patch does not
change any functionality.
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-22-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The type name enum req_opf is misleading since it suggests that values of
this type include both an operation type and flags. Since values of this
type represent an operation only, change the type name into enum req_op.
Convert the enum req_op documentation into kernel-doc format. Move a few
definitions such that the enum req_op documentation occurs just above
the enum req_op definition.
The name "req_opf" was introduced by commit ef295ecf09 ("block: better op
and flags encoding").
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The "r" variable shadows an earlier "r" that has function scope. It
means that we accidentally return success instead of an error code.
Smatch has a warning for this:
drivers/md/dm-integrity.c:4503 dm_integrity_ctr()
warn: missing error code 'r'
Fixes: 7eada909bf ("dm: add integrity target")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
It is possible to set up dm-integrity in such a way that the
"tag_size" parameter is less than the actual digest size. In this
situation, a part of the digest beyond tag_size is ignored.
In this case, dm-integrity would write beyond the end of the
ic->recalc_tags array and corrupt memory. The corruption happened in
integrity_recalc->integrity_sector_checksum->crypto_shash_final.
Fix this corruption by increasing the tags array so that it has enough
padding at the end to accomodate the loop in integrity_recalc() being
able to write a full digest size for the last member of the tags
array.
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Commit f6f72f32c2 ("dm integrity: don't replay journal data past the
end of the device") skips journal replay if the target sector points
beyond the end of the device. Unfortunatelly, it doesn't set the
journal entry unused, which resulted in this BUG being triggered:
BUG_ON(!journal_entry_is_unused(je))
Fix this by calling journal_entry_set_unused() for this case.
Fixes: f6f72f32c2 ("dm integrity: don't replay journal data past the end of the device")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Milan Broz <gmazyland@gmail.com>
[snitzer: revised header]
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Use the %pg format specifier to save on stack consuption and code size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220304180105.409765-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Add struct_group() to mark region of struct journal_sector that should be
initialized to zero.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit 25058d1c72 ("dm integrity: use bvec_kmap_local in
__journal_read_write") didn't account for __journal_read_write() later
adding the biovec's bv_offset. As such using bvec_kmap_local() caused
the start of the biovec to be skipped.
Trivial test that illustrates data corruption:
# integritysetup format /dev/pmem0
# integritysetup open /dev/pmem0 integrityroot
# mkfs.xfs /dev/mapper/integrityroot
...
bad magic number
bad magic number
Metadata corruption detected at xfs_sb block 0x0/0x1000
libxfs_writebufr: write verifer failed on xfs_sb bno 0x0/0x1000
releasing dirty buffer (bulk) to free list!
Fix this by using kmap_local_page() instead of bvec_kmap_local() in
__journal_read_write().
Fixes: 25058d1c72 ("dm integrity: use bvec_kmap_local in __journal_read_write")
Reported-by: Tony Asleson <tasleson@redhat.com>
Reviewed-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
subsystem. Also enhance both the integrity and crypt targets to emit
events to via dm-audit.
- Various other simple code improvements and cleanups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmGJlFkACgkQxSPxCi2d
A1pqwwf/YZ6kNKRQaKF1mbkkHOxa/ULf7qIhi/R0epwJu4j1RGsCACS34EqzLc4c
x15h6flCNj1IBVAqTvMUETYTjTLtyrcfD0yBRWYw2RL0ksHMHyMvd1r/7aE64+pj
EeZk9Xzcx3Gsq9GOzKfYA2AX0PrypkKSjgHK7hgv+Jh5heqkFcnMXSl3l7BQ6vbr
ue9joPSI7+6eVFMDn32KxyHzfm6zZo1nmKZ6tQBBHD1D9yBqWTAhXiyXhRA+BOYH
Tg5wE1fvZ/htyZNEc1cMRArzLF6q9pEU4r8j472N6IcJbhIJzSu0V60zVvexNWG3
fJSIWqlta1KFK8SQttmDmfFnJiFcyw==
=t097
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Add DM core support for emitting audit events through the audit
subsystem. Also enhance both the integrity and crypt targets to emit
events to via dm-audit.
- Various other simple code improvements and cleanups.
* tag 'for-5.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm table: log table creation error code
dm: make workqueue names device-specific
dm writecache: Make use of the helper macro kthread_run()
dm crypt: Make use of the helper macro kthread_run()
dm verity: use bvec_kmap_local in verity_for_bv_block
dm log writes: use memcpy_from_bvec in log_writes_map
dm integrity: use bvec_kmap_local in __journal_read_write
dm integrity: use bvec_kmap_local in integrity_metadata
dm: add add_disk() error handling
dm: Remove redundant flush_workqueue() calls
dm crypt: log aead integrity violations to audit subsystem
dm integrity: log audit events for dm-integrity target
dm: introduce audit event module for device mapper
Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm-integrity signals integrity violations by returning I/O errors
to user space. To identify integrity violations by a controlling
instance, the kernel audit subsystem can be used to emit audit
events to user space. We use the new dm-audit submodule allowing
to emit audit events on relevant I/O errors.
The construction and destruction of integrity device mappings are
also relevant for auditing a system. Thus, those events are also
logged as audit events.
Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Use the proper helpers to read the block device size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20211018101130.1838532-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
are the basis for deploying DM-based storage in a "cloud" that must
validate configurations end-users run to maintain trust. These DM
changes allow supported DM targets' configurations to be measured
via IMA. But the policy and enforcement (of which configurations are
valid) is managed by something outside the kernel (e.g. Keylime).
- Fix DM crypt scalability regression on systems with many cpus due to
percpu_counter spinlock contention in crypt_page_alloc().
- Use in_hardirq() instead of deprecated in_irq() in DM crypt.
- Add event counters to DM writecache to allow users to further assess
how the writecache is performing.
- Various code cleanup in DM writecache's main IO mapping function.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmEuWG0ACgkQxSPxCi2d
A1rZIgf+JSSR2/DBg4j9w0oVsay+rfFB+tyZLVvHFEraukDbxOKy7Dck1GZybQBq
mFTqCWKQHOvME4nf4swIY/klPi3VhPNyWDY/hI/FAFaiTskLqjxhQQc1+cECLkMx
ittIKYvWgcg7kflCuN6LiUslTB/P4Lo6GmNqMOhFn3nkN5hg76xaxPK+JCMGLgTM
qs+mbZfB1Z51G+cDlU0E5WCn37k/jqqwhb8NN90Zozgi7ByQEO01bd2EkSsYT0T/
ZrDOWP8M8u14QHAV0e8n9e6a/d5atIV5g/+XrDbVDvzwtq7eI+ojBNHDBpcgxiH7
/AVb9AM4Pd87ExWMbsBxr3Hgbc5+dQ==
=yIsi
-----END PGP SIGNATURE-----
Merge tag 'for-5.15/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Add DM infrastructure for IMA-based remote attestion. These changes
are the basis for deploying DM-based storage in a "cloud" that must
validate configurations end-users run to maintain trust. These DM
changes allow supported DM targets' configurations to be measured via
IMA. But the policy and enforcement (of which configurations are
valid) is managed by something outside the kernel (e.g. Keylime).
- Fix DM crypt scalability regression on systems with many cpus due to
percpu_counter spinlock contention in crypt_page_alloc().
- Use in_hardirq() instead of deprecated in_irq() in DM crypt.
- Add event counters to DM writecache to allow users to further assess
how the writecache is performing.
- Various code cleanup in DM writecache's main IO mapping function.
* tag 'for-5.15/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm crypt: use in_hardirq() instead of deprecated in_irq()
dm ima: update dm documentation for ima measurement support
dm ima: update dm target attributes for ima measurements
dm ima: add a warning in dm_init if duplicate ima events are not measured
dm ima: prefix ima event name related to device mapper with dm_
dm ima: add version info to dm related events in ima log
dm ima: prefix dm table hashes in ima log with hash algorithm
dm crypt: Avoid percpu_counter spinlock contention in crypt_page_alloc()
dm: add documentation for IMA measurement support
dm: update target status functions to support IMA measurement
dm ima: measure data on device rename
dm ima: measure data on table clear
dm ima: measure data on device remove
dm ima: measure data on device resume
dm ima: measure data on table load
dm writecache: add event counters
dm writecache: report invalid return from writecache_map helpers
dm writecache: further writecache_map() cleanup
dm writecache: factor out writecache_map_remap_origin()
dm writecache: split up writecache_map() to improve code readability
Certain DM targets ('integrity', 'multipath', 'verity') need to update the
way their attributes are recorded in the ima log, so that the attestation
servers can interpret the data correctly and decide if the devices
meet the attestation requirements. For instance, the "mode=%c" attribute
in the 'integrity' target is measured twice, the 'verity' target is
missing the attribute "root_hash_sig_key_desc=%s", and the 'multipath'
target needs to index the attributes properly.
Update 'integrity' target to remove the duplicate measurement of
the attribute "mode=%c". Add "root_hash_sig_key_desc=%s" attribute
for the 'verity' target. Index various attributes in 'multipath'
target. Also, add "nr_priority_groups=%u" attribute to 'multipath'
target to record the number of priority groups.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Suggested-by: Thore Sommer <public@thson.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
For device mapper targets to take advantage of IMA's measurement
capabilities, the status functions for the individual targets need to be
updated to handle the status_type_t case for value STATUSTYPE_IMA.
Update status functions for the following target types, to log their
respective attributes to be measured using IMA.
01. cache
02. crypt
03. integrity
04. linear
05. mirror
06. multipath
07. raid
08. snapshot
09. striped
10. verity
For rest of the targets, handle the STATUSTYPE_IMA case by setting the
measurement buffer to NULL.
For IMA to measure the data on a given system, the IMA policy on the
system needs to be updated to have the following line, and the system
needs to be restarted for the measurements to take effect.
/etc/ima/ima-policy
measure func=CRITICAL_DATA label=device-mapper template=ima-buf
The measurements will be reflected in the IMA logs, which are located at:
/sys/kernel/security/integrity/ima/ascii_runtime_measurements
/sys/kernel/security/integrity/ima/binary_runtime_measurements
These IMA logs can later be consumed by various attestation clients
running on the system, and send them to external services for attesting
the system.
The DM target data measured by IMA subsystem can alternatively
be queried from userspace by setting DM_IMA_MEASUREMENT_FLAG with
DM_TABLE_STATUS_CMD.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Use the types __le* instead of __u* to fix sparse warnings.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Revert the commit 7a5b96b478 ("dm integrity:
use discard support when recalculating").
There's a bug that when we write some data beyond the current recalculate
boundary, the checksum will be rewritten with the discard filler later.
And the data will no longer have integrity protection. There's no easy
fix for this case.
Also, another problematic case is if dm-integrity is used to detect
bitrot (random device errors, bit flips, etc); dm-integrity should
detect that even for unused sectors. With commit 7a5b96b478 it can
happen that such change is undetected (because discard filler is not a
valid checksum).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If we have discard support we don't have to recalculate hash - we can
just fill the metadata with the discard pattern.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Increase RECALC_SECTORS because it improves recalculate speed slightly
(from 390kiB/s to 410kiB/s).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If we discard already discarded blocks we do not need to write discard
pattern to the metadata, because it is already there.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add a new flag "reset_recalculate" that will restart recalculating
from the beginning of the device. It can be used if we want to change
the hash function. Example:
dmsetup remove_all
rmmod brd
set -e
modprobe brd rd_size=1048576
dmsetup create in --table '0 2000000 integrity /dev/ram0 0 16 J 2 internal_hash:sha256 recalculate'
sleep 10
dmsetup status
dmsetup remove in
dmsetup create in --table '0 2000000 integrity /dev/ram0 0 16 J 2 internal_hash:sha3-256 reset_recalculate'
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The "fix_hmac" argument improves security of internal_hash and
journal_mac:
- the section number is mixed to the mac, so that an attacker can't
copy sectors from one journal section to another journal section
- the superblock is protected by journal_mac
- a 16-byte salt stored in the superblock is mixed to the mac, so
that the attacker can't detect that two disks have the same hmac
key and also to disallow the attacker to move sectors from one
disk to another
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Daniel Glockner <dg@emlix.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> # ReST fix
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
There is a spelling mistake in a dm_integrity_io_error error
message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Otherwise a malicious user could (ab)use the "recalculate" feature
that makes dm-integrity calculate the checksums in the background
while the device is already usable. When the system restarts before all
checksums have been calculated, the calculation continues where it was
interrupted even if the recalculate feature is not requested the next
time the dm device is set up.
Disable recalculating if we use internal_hash or journal_hash with a
key (e.g. HMAC) and we don't have the "legacy_recalculate" flag.
This may break activation of a volume, created by an older kernel,
that is not yet fully recalculated -- if this happens, the user should
add the "legacy_recalculate" flag to constructor parameters.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Daniel Glockner <dg@emlix.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Recalculate can only be specified with internal_hash.
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Advance the maximum number of arguments from 9 to 15 to account for
all potential feature flags that may be supplied.
Linux 4.19 added "meta_device"
(356d9d52e1) and "recalculate"
(a3fcf72531) flags.
Commit 468dfca38b added
"sectors_per_bit" and "bitmap_flush_interval".
Commit 84597a44a9 added
"allow_discards".
And the commit d537858ac8 added
"fix_padding".
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
With external metadata device, flush requests are not passed down to the
data device.
Fix this by submitting the flush request in dm_integrity_flush_buffers. In
order to not degrade performance, we overlap the data device flush with
the metadata device flush.
Reported-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Don't use crypto drivers that have the flag CRYPTO_ALG_ALLOCATES_MEMORY
set. These drivers allocate memory and thus they are not suitable for
block I/O processing.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The dm-integrity target did not report errors in bitmap mode just after
creation. The reason is that the function integrity_recalc didn't clean up
ic->recalc_bitmap as it proceeded with recalculation.
Fix this by updating the bitmap accordingly -- the double shift serves
to rounddown.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 468dfca38b ("dm integrity: add a bitmap mode")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
As said by Linus:
A symmetric naming is only helpful if it implies symmetries in use.
Otherwise it's actively misleading.
In "kzalloc()", the z is meaningful and an important part of what the
caller wants.
In "kzfree()", the z is actively detrimental, because maybe in the
future we really _might_ want to use that "memfill(0xdeadbeef)" or
something. The "zero" part of the interface isn't even _relevant_.
The main reason that kzfree() exists is to clear sensitive information
that should not be leaked to other future users of the same memory
objects.
Rename kzfree() to kfree_sensitive() to follow the example of the recently
added kvfree_sensitive() and make the intention of the API more explicit.
In addition, memzero_explicit() is used to clear the memory to make sure
that it won't get optimized away by the compiler.
The renaming is done by using the command sequence:
git grep -w --name-only kzfree |\
xargs sed -i 's/kzfree/kfree_sensitive/'
followed by some editing of the kfree_sensitive() kerneldoc and adding
a kzfree backward compatibility macro in slab.h.
[akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h]
[akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more]
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=abJG
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"Good amount of cleanups and tech debt removals in here, and as a
result, the diffstat shows a nice net reduction in code.
- Softirq completion cleanups (Christoph)
- Stop using ->queuedata (Christoph)
- Cleanup bd claiming (Christoph)
- Use check_events, moving away from the legacy media change
(Christoph)
- Use inode i_blkbits consistently (Christoph)
- Remove old unused writeback congestion bits (Christoph)
- Cleanup/unify submission path (Christoph)
- Use bio_uninit consistently, instead of bio_disassociate_blkg
(Christoph)
- sbitmap cleared bits handling (John)
- Request merging blktrace event addition (Jan)
- sysfs add/remove race fixes (Luis)
- blk-mq tag fixes/optimizations (Ming)
- Duplicate words in comments (Randy)
- Flush deferral cleanup (Yufen)
- IO context locking/retry fixes (John)
- struct_size() usage (Gustavo)
- blk-iocost fixes (Chengming)
- blk-cgroup IO stats fixes (Boris)
- Various little fixes"
* tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits)
block: blk-timeout: delete duplicated word
block: blk-mq-sched: delete duplicated word
block: blk-mq: delete duplicated word
block: genhd: delete duplicated words
block: elevator: delete duplicated word and fix typos
block: bio: delete duplicated words
block: bfq-iosched: fix duplicated word
iocost_monitor: start from the oldest usage index
iocost: Fix check condition of iocg abs_vdebt
block: Remove callback typedefs for blk_mq_ops
block: Use non _rcu version of list functions for tag_set_list
blk-cgroup: show global disk stats in root cgroup io.stat
blk-cgroup: make iostat functions visible to stat printing
block: improve discard bio alignment in __blkdev_issue_discard()
block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers
block: defer flush request no matter whether we have elevator
block: make blk_timeout_init() static
block: remove retry loop in ioc_release_fn()
block: remove unnecessary ioc nested locking
block: integrate bd_start_claiming into __blkdev_get
...
Commit adc0daad36 ("dm: report suspended
device during destroy") broke integrity recalculation.
The problem is dm_suspended() returns true not only during suspend,
but also during resume. So this race condition could occur:
1. dm_integrity_resume calls queue_work(ic->recalc_wq, &ic->recalc_work)
2. integrity_recalc (&ic->recalc_work) preempts the current thread
3. integrity_recalc calls if (unlikely(dm_suspended(ic->ti))) goto unlock_ret;
4. integrity_recalc exits and no recalculating is done.
To fix this race condition, add a function dm_post_suspending that is
only true during the postsuspend phase and use it instead of
dm_suspended().
Signed-off-by: Mikulas Patocka <mpatocka redhat com>
Fixes: adc0daad36 ("dm: report suspended device during destroy")
Cc: stable vger kernel org # v4.18+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
generic_make_request has always been very confusingly misnamed, so rename
it to submit_bio_noacct to make it clear that it is submit_bio minus
accounting and a few checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
version 2 feature that adds support for pairing regular block
devices with a zoned device to ease performance impact associated
with finite random zones of zoned device. Changes came in 3
batches: first prepared for and then added the ability to pair a
single regular block device, second was a batch of fixes to improve
zoned's reclaim heuristic, third removed the limitation of only
adding a single additional regular block device to allow many
devices. Testing has shown linear scaling as more devices are
added.
- Add new emulated block size (ebs) target that emulates a smaller
logical_block_size than a block device supports. Primary use-case
is to emulate "512e" devices that have 512 byte logical_block_size
and 4KB physical_block_size. This is useful to some legacy
applications otherwise wouldn't be ablee to be used on 4K devices
because they depend on issuing IO in 512 byte granularity.
- Add discard interfaces to DM bufio. First consumer of the interface
is the dm-ebs target that makes heavy use of dm-bufio.
- Fix DM crypt's block queue_limits stacking to not truncate
logic_block_size.
- Add Documentation for DM integrity's status line.
- Switch DMDEBUG from a compile time config option to instead use
dynamic debug via pr_debug.
- Fix DM multipath target's hueristic for how it manages
"queue_if_no_path" state internally. DM multipath now avoids
disabling "queue_if_no_path" unless it is actually needed (e.g. in
response to configure timeout or explicit "fail_if_no_path"
message). This fixes reports of spurious -EIO being reported back
to userspace application during fault tolerance testing with an NVMe
backend. Added various dynamic DMDEBUG messages to assist with
debugging queue_if_no_path in the future.
- Add a new DM multipath "Historical Service Time" Path Selector.
- Fix DM multipath's dm_blk_ioctl() to switch paths on IO error.
- Improve DM writecache target performance by using explicit
cache flushing for target's single-threaded usecase and a small
cleanup to remove unnecessary test in persistent_memory_claim.
- Other small cleanups in DM core, dm-persistent-data, and DM integrity.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl7alrgTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWl42B/9sBd+j60emy4Bliu/f3pd7SEkFrSXv
K2jXicRFx4E5kO0aLK+fX65cOiq2vvLsDh8c++0TLXcD9q7oK0qxK9c8TCPq29Cx
W2J2dwdjyyqqbr3/FZHYYM9KLOl5rsxJLygXwhJhQ2Gny44L7nVACrAXNzXIHJ3r
f8xr+GLdF/jz7WLj8bwEDo3Bf8wvxDvl2ijqj7EceOhTutNE8xHQ6UcTPqTtozJy
sNM8UQNk1L43DBAvXfrKZ+yQ5DYAKdXKJpV9C8qv5DEGbaEikuMrHddgO4KlDdp4
VjPk9GSfPwGcJ4ecN8vgecZVGvh52ZU7OZ8qey/q0zqps74jeHTZQQyM
=jRun
-----END PGP SIGNATURE-----
Merge tag 'for-5.8/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- The largest change for this cycle is the DM zoned target's metadata
version 2 feature that adds support for pairing regular block devices
with a zoned device to ease the performance impact associated with
finite random zones of zoned device.
The changes came in three batches: the first prepared for and then
added the ability to pair a single regular block device, the second
was a batch of fixes to improve zoned's reclaim heuristic, and the
third removed the limitation of only adding a single additional
regular block device to allow many devices.
Testing has shown linear scaling as more devices are added.
- Add new emulated block size (ebs) target that emulates a smaller
logical_block_size than a block device supports
The primary use-case is to emulate "512e" devices that have 512 byte
logical_block_size and 4KB physical_block_size. This is useful to
some legacy applications that otherwise wouldn't be able to be used
on 4K devices because they depend on issuing IO in 512 byte
granularity.
- Add discard interfaces to DM bufio. First consumer of the interface
is the dm-ebs target that makes heavy use of dm-bufio.
- Fix DM crypt's block queue_limits stacking to not truncate
logic_block_size.
- Add Documentation for DM integrity's status line.
- Switch DMDEBUG from a compile time config option to instead use
dynamic debug via pr_debug.
- Fix DM multipath target's hueristic for how it manages
"queue_if_no_path" state internally.
DM multipath now avoids disabling "queue_if_no_path" unless it is
actually needed (e.g. in response to configure timeout or explicit
"fail_if_no_path" message).
This fixes reports of spurious -EIO being reported back to userspace
application during fault tolerance testing with an NVMe backend.
Added various dynamic DMDEBUG messages to assist with debugging
queue_if_no_path in the future.
- Add a new DM multipath "Historical Service Time" Path Selector.
- Fix DM multipath's dm_blk_ioctl() to switch paths on IO error.
- Improve DM writecache target performance by using explicit cache
flushing for target's single-threaded usecase and a small cleanup to
remove unnecessary test in persistent_memory_claim.
- Other small cleanups in DM core, dm-persistent-data, and DM
integrity.
* tag 'for-5.8/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (62 commits)
dm crypt: avoid truncating the logical block size
dm mpath: add DM device name to Failing/Reinstating path log messages
dm mpath: enhance queue_if_no_path debugging
dm mpath: restrict queue_if_no_path state machine
dm mpath: simplify __must_push_back
dm zoned: check superblock location
dm zoned: prefer full zones for reclaim
dm zoned: select reclaim zone based on device index
dm zoned: allocate zone by device index
dm zoned: support arbitrary number of devices
dm zoned: move random and sequential zones into struct dmz_dev
dm zoned: per-device reclaim
dm zoned: add metadata pointer to struct dmz_dev
dm zoned: add device pointer to struct dm_zone
dm zoned: allocate temporary superblock for tertiary devices
dm zoned: convert to xarray
dm zoned: add a 'reserved' zone flag
dm zoned: improve logging messages for reclaim
dm zoned: avoid unnecessary device recalulation for secondary superblock
dm zoned: add debugging message for reading superblocks
...
The argument isn't used by any caller, and drivers don't fill out
bi_sector for flush requests either.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/md/dm-integrity.c: In function 'integrity_metadata':
drivers/md/dm-integrity.c:1557:12: warning:
variable 'save_metadata_offset' set but not used [-Wunused-but-set-variable]
drivers/md/dm-integrity.c:1556:12: warning:
variable 'save_metadata_block' set but not used [-Wunused-but-set-variable]
They are never used, so remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If all the bytes are equal to DISCARD_FILLER, we want to accept the
buffer. If any of the bytes are different, we must do thorough
tag-by-tag checking.
The condition was inverted.
Fixes: 84597a44a9 ("dm integrity: add optional discard support")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Otherwise:
In file included from drivers/md/dm-integrity.c:13:
drivers/md/dm-integrity.c: In function 'dm_integrity_status':
drivers/md/dm-integrity.c:3061:10: error: format '%llu' expects
argument of type 'long long unsigned int', but argument 4 has type
'long int' [-Werror=format=]
DMEMIT("%llu %llu",
^~~~~~~~~~~
atomic64_read(&ic->number_of_mismatches),
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/device-mapper.h:550:46: note: in definition of macro 'DMEMIT'
0 : scnprintf(result + sz, maxlen - sz, x))
^
cc1: all warnings being treated as errors
Fixes: 7649194a16 ("dm integrity: remove sector type casts")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When we discard something that is present in the journal, we flush the
journal first, so that discarded blocks are not overwritten by the journal
content.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add an argument "allow_discards" that enables discard processing on
dm-integrity device. Discards are only allowed to devices using
internal hash.
When a block is discarded the integrity tag is filled with
DISCARD_FILLER (0xf6) bytes.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If the size of the underlying device changes, change the size of the
integrity device too.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Move code to a new function get_provided_data_sectors().
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Following commits will make it possible to shrink or extend the device. If
the device was shrunk, we don't want to replay journal data pointing past
the end of the device.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Linus Torvalds