Migrate apic driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
We weren't doing anything while switching to resume mode and so that
callback isn't implemented.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Bandan Das <bsd@redhat.com>
Link: http://lkml.kernel.org/r/1896ac5989d27f2ac37f4786af9bd537e1921b83.1437042675.git.viresh.kumar@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
__verify_local_APIC() is detritus from the early APIC days.
Its return value isn't used anywhere and the information it
prints when debug is enabled is already part of APIC
initialization messages printed to syslog. Off with it!
Signed-off-by: Bandan Das <bsd@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/jpgy4mcsxsq.fsf@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts commit 5fcee53ce7.
It causes the suspend to fail on at least the Chromebook Pixel, possibly
other platforms too.
Joerg Roedel points out that the logic should probably have been
if (max_physical_apicid > 255 ||
!(IS_ENABLED(CONFIG_HYPERVISOR_GUEST) &&
hypervisor_x2apic_available())) {
instead, but since the code is not in any fast-path, so we can just live
without that optimization and just revert to the original code.
Acked-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that the APIC bringup is consolidated we can move the setup call
for the percpu clock event device to apic_bsp_setup().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211704.162567839@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Extend apic_bsp_setup() so the same code flow can be used for
APIC_init_uniprocessor().
Folded Jiangs fix to provide proper ordering of the UP setup.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211704.084765674@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We better provide proper functions which implement the required code
flow in the apic code rather than letting the smpboot code open code
it. That allows to make more functions static and confines the APIC
functionality to apic.c where it belongs.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.907616730@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The UP local API support can be set up from an early initcall. No need
for horrible hackery in the init code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211703.827943883@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move the code to a different place so we can make other functions
inline. Preparatory patch for further cleanups. No change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.731329006@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We have proper stubs for the IOAPIC=n case and the setup/enable
function have the required checks inside now. Remove the ifdeffery and
the copy&pasted conditionals.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>C
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.569830549@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use the state information to simplify the disable logic further.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.209387598@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
enable_x2apic() is a convoluted unreadable mess because it is used for
both enablement in early boot and for setup in cpu_init().
Split the code into x2apic_enable() for enablement and x2apic_setup()
for setup of (secondary cpus). Make use of the new state tracking to
simplify the logic.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211703.129287153@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There is no point in postponing the hardware disablement of x2apic. It
can be disabled right away in the nox2apic setup function.
Disable it right away and set the state to DISABLED . This allows to
remove all the nox2apic conditionals all over the place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211703.051214090@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Having 3 different variables to track the state is just silly and
error prone. Add a proper state tracking variable which covers the
three possible states: ON/OFF/DISABLED.
We cannot use x2apic_mode for this as this would require to change all
users of x2apic_mode with explicit comparisons for a state value
instead of treating it as boolean.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211702.955392443@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Rename the argument of try_to_enable_x2apic() so the purpose becomes
more clear.
Make the pr_warning more consistent and avoid the double print of
"disabling".
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211702.876012628@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
No point in having try_to_enable_x2apic() outside of the
CONFIG_X86_X2APIC section and having inline functions and more ifdefs
to deal with it. Move the code into the existing ifdef section and
remove the inline cruft.
Fixup the printk about not enabling interrupt remapping as suggested
by Boris.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211702.795388613@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
No point in delaying the x2apic detection for the CONFIG_X86_X2APIC=n
case to enable_IR_x2apic(). We rather detect that before we try to
setup anything there.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211702.702479404@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If x2apic_preenabled is not enabled, then disable_x2apic() is not
called from various places which results in x2apic_disabled not being
set. So other code pathes can happily reenable the x2apic.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211702.621431109@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The x2apic_preenabled flag is just a horrible hack and if X2APIC
support is disabled it does not reflect the actual hardware
state. Check the hardware instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211702.541280622@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Having several disjunct pieces of code for x2apic support makes
reading the code unnecessarily hard. Move it to one ifdeffed section.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211702.445212133@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
No point in having a static variable around which is always 0. Let the
compiler optimize code out if disabled.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211702.363274310@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
enable_IR_x2apic() grew a open coded x2apic detection. Implement a
proper helper function which shares the code with the already existing
x2apic_enabled().
Made it use rdmsrl_safe as suggested by Boris.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211702.285038186@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Simplify irq_remapping code by killing irq_remapping_supported() and
related interfaces.
Joerg posted a similar patch at https://lkml.org/lkml/2014/12/15/490,
so assume an signed-off from Joerg.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-14-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When interrupt remapping hardware is not in X2APIC, CPU X2APIC mode
will be disabled if:
1) Maximum CPU APIC ID is bigger than 255
2) hypervisior doesn't support x2apic mode.
But we should only check whether hypervisor supports X2APIC mode when
hypervisor(CONFIG_HYPERVISOR_GUEST) is enabled, otherwise X2APIC will
always be disabled when CONFIG_HYPERVISOR_GUEST is disabled and IR
doesn't work in X2APIC mode.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Tested-by: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-12-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If remapping is in XAPIC mode, the setup code just skips X2APIC
initialization without checking max CPU APIC ID in system, which may
cause problem if system has a CPU with APIC ID bigger than 255.
Handle IR in XAPIC mode the same way as if remapping is disabled.
[ tglx: Split out from previous patch ]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-8-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Refine enable_IR_x2apic() and related functions for better readability.
[ tglx: Removed the XAPIC mode change and split it out into a seperate
patch. Added comments. ]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-8-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
X2APIC will be disabled if user specifies "nox2apic" on kernel command
line, even when x2apic_preenabled is true. So correctly detect X2APIC
status by using x2apic_enabled() instead of x2apic_preenabled.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-7-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Local variable x2apic_enabled has been assigned to but never referred,
so kill it.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-6-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When kernel doesn't support X2APIC but BIOS has enabled X2APIC, system
may panic or hang without useful messages. On the other hand, it's
hard to dynamically disable X2APIC when CONFIG_X86_X2APIC is disabled.
So panic with a clear message in such a case.
Now system panics as below when X2APIC is disabled and interrupt remapping
is enabled:
[ 0.316118] LAPIC pending interrupts after 512 EOI
[ 0.322126] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.368655] Kernel panic - not syncing: timer doesn't work through Interrupt-remapped IO-APIC
[ 0.378300] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0+ #340
[ 0.385300] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0051.L05.1406240953 06/24/2014
[ 0.396997] ffff88046dc03000 ffff88046c307dd8 ffffffff8179dada 00000000000043f2
[ 0.405629] ffffffff81a92158 ffff88046c307e58 ffffffff8179b757 0000000000000002
[ 0.414261] 0000000000000008 ffff88046c307e68 ffff88046c307e08 ffffffff813ad82b
[ 0.422890] Call Trace:
[ 0.425711] [<ffffffff8179dada>] dump_stack+0x45/0x57
[ 0.431533] [<ffffffff8179b757>] panic+0xc1/0x1f5
[ 0.436978] [<ffffffff813ad82b>] ? delay_tsc+0x3b/0x70
[ 0.442910] [<ffffffff8166fa2c>] panic_if_irq_remap+0x1c/0x20
[ 0.449524] [<ffffffff81d73645>] setup_IO_APIC+0x405/0x82e
[ 0.464979] [<ffffffff81d6fcc2>] native_smp_prepare_cpus+0x2d9/0x31c
[ 0.472274] [<ffffffff81d5d0ac>] kernel_init_freeable+0xd6/0x223
[ 0.479170] [<ffffffff81792ad0>] ? rest_init+0x80/0x80
[ 0.485099] [<ffffffff81792ade>] kernel_init+0xe/0xf0
[ 0.490932] [<ffffffff817a537c>] ret_from_fork+0x7c/0xb0
[ 0.497054] [<ffffffff81792ad0>] ? rest_init+0x80/0x80
[ 0.502983] ---[ end Kernel panic - not syncing: timer doesn't work through Interrupt-remapped IO-APIC
System hangs as below when X2APIC and interrupt remapping are both disabled:
[ 1.102782] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 1.109351] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 1.115915] pci 0000:00:03.2: System wakeup disabled by ACPI
[ 1.122479] pci 0000:00:03.3: System wakeup disabled by ACPI
[ 1.132274] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 1.137620] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 1.145239] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.151790] pci 0000:00:1c.7: Enabling MPC IRBNCE
[ 1.157128] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled
[ 1.164748] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 1.171447] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 1.178612] acpiphp: Slot [8] registered
[ 1.183095] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 1.188867] acpiphp: Slot [2] registered
With this patch applied, the system panics in both cases with a proper
panic message.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-5-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If x2apic got disabled on the kernel command line, then the following
issue can happen:
enable_IR_x2apic()
....
x2apic_mode = 1;
enable_x2apic();
if (x2apic_disabled) {
__disable_x2apic();
return;
}
That leaves X2APIC disabled in hardware, but x2apic_mode stays 1. So
all other code which checks x2apic_mode gets the wrong information.
Set x2apic_mode to 0 after disabling it in hardware.
This is just a hotfix. The proper solution is to rework this code so
it has seperate functions for the initial setup on the boot processor
and the secondary cpus, but that's beyond the scope of this fix.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
enable_IR_x2apic() calls setup_irq_remapping_ops() which by default
installs the intel dmar remapping ops and then calls the amd iommu irq
remapping prepare callback to figure out whether we are running on an
AMD machine with irq remapping hardware.
Right after that it calls irq_remapping_prepare() which pointlessly
checks:
if (!remap_ops || !remap_ops->prepare)
return -ENODEV;
and then calls
remap_ops->prepare()
which is silly in the AMD case as it got called from
setup_irq_remapping_ops() already a few microseconds ago.
Simplify this and just collapse everything into
irq_remapping_prepare().
The irq_remapping_prepare() remains still silly as it assigns blindly
the intel ops, but that's not scope of this patch.
The scope here is to move the preperatory work, i.e. memory
allocations out of the atomic section which is required to enable irq
remapping.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Acked-and-tested-by: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: Joerg Roedel <jroedel@suse.de>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20141205084147.232633738@linutronix.de
Link: http://lkml.kernel.org/r/1420615903-28253-2-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When X86_LOCAL_APIC (i.e. unconditionally on x86-64),
first_system_vector will never end up being higher than
LOCAL_TIMER_VECTOR (0xef), and hence building stubs for vectors
0xef...0xff is pointlessly reducing code density. Deal with this at
build time already.
Taking into consideration that X86_64 implies X86_LOCAL_APIC, also
simplify (and hence make easier to read and more consistent with the
change done here) some #if-s in arch/x86/kernel/irqinit.c.
While we could further improve the packing of the IRQ entry stubs (the
four ones now left in the last set could be fit into the four padding
bytes each of the final four sets have) this doesn't seem to provide
any real benefit: Both irq_entries_start and common_interrupt getting
cache line aligned, eliminating the 30th set would just produce 32
bytes of padding between the 29th and common_interrupt.
[ tglx: Folded lguest fix from Dan Carpenter ]
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: lguest@lists.ozlabs.org
Cc: Rusty Russell <rusty@rustcorp.com.au>
Link: http://lkml.kernel.org/r/54574D5F0200007800044389@mail.emea.novell.com
Link: http://lkml.kernel.org/r/20141115185718.GB6530@mwanda
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJURGCfAAoJEHm+PkMAQRiG6toH/RUazjqZxqMvLlm1y+O6+7s9
OpFdcDl4ZQtrvymBRYipu46pbDUoAAsVbxQJllaLNtHE0UrvaQE76WihBQYM8qW/
WoESLsZRbNQqQYQixf55pOozX7uIuG+9LKHagC8JNfD1Bw/nQ+RleSXqFsBCdpMW
i7SzcZBu2Iv+LnVmjvoGMOQa+loKzO6Pj1MpoHxxJQmeypH3dZR7mLVeBJNZQtLE
BGY47gYraVzb9EjKnSbjrIKjpM9o0MIihoanrrjnq0JMrfm4pi6W5GgaGDUiaBVH
w7Vmr5S2pjzrS41gKSVK9/XO1CrDG8tsp3QwA2+iIbjdR3wBDynyeG3UfnLABec=
=hwbG
-----END PGP SIGNATURE-----
Merge tag 'v3.18-rc1' into x86/urgent
Reason:
Need to apply audit patch on top of v3.18-rc1.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
If the TSC is unusable or disabled, then this patch fixes:
- Confusion while trying to clear old APIC interrupts.
- Division by zero and incorrect programming of the TSC deadline
timer.
This fixes boot if the CPU has a TSC deadline timer but a missing or
broken TSC. The failure to boot can be observed with qemu using
-cpu qemu64,-tsc,+tsc-deadline
This also happens to me in nested KVM for unknown reasons.
With this patch, I can boot cleanly (although without a TSC).
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Bandan Das <bsd@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/e2fa274e498c33988efac0ba8b7e3120f7f92d78.1413393027.git.luto@amacapital.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x). This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.
Other use cases are for storing and retrieving data from the current
processors percpu area. __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.
__get_cpu_var() is defined as :
#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))
__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.
this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.
This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset. Thereby address calculations are avoided and less registers
are used when code is generated.
Transformations done to __get_cpu_var()
1. Determine the address of the percpu instance of the current processor.
DEFINE_PER_CPU(int, y);
int *x = &__get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(&y);
2. Same as #1 but this time an array structure is involved.
DEFINE_PER_CPU(int, y[20]);
int *x = __get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(y);
3. Retrieve the content of the current processors instance of a per cpu
variable.
DEFINE_PER_CPU(int, y);
int x = __get_cpu_var(y)
Converts to
int x = __this_cpu_read(y);
4. Retrieve the content of a percpu struct
DEFINE_PER_CPU(struct mystruct, y);
struct mystruct x = __get_cpu_var(y);
Converts to
memcpy(&x, this_cpu_ptr(&y), sizeof(x));
5. Assignment to a per cpu variable
DEFINE_PER_CPU(int, y)
__get_cpu_var(y) = x;
Converts to
__this_cpu_write(y, x);
6. Increment/Decrement etc of a per cpu variable
DEFINE_PER_CPU(int, y);
__get_cpu_var(y)++
Converts to
__this_cpu_inc(y)
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When a vSMP Foundation box is detected, the function apic_cluster_num() counts
the number of APIC clusters found. If more than one found, a multi board
configuration is assumed, and TSC marked as unstable. This behavior is
incorrect as vSMP Foundation may use processors from single node only, attached
to memory of other nodes - and such node may have more than one APIC cluster
(typically any recent intel box has more than single APIC_CLUSTERID(x)).
To fix this, we simply remove the code which detects a vSMP Foundation box and
affects apic_is_clusted_box() return value. This can be done because later the
kernel checks by itself if the TSC is stable using the
check_tsc_sync_[source|target]() functions and marks TSC as unstable if needed.
Acked-by: Shai Fultheim <shai@scalemp.com>
Signed-off-by: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1404036068-11674-1-git-send-email-oren@scalemp.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Simplify arch/x86/include/asm/mpspec.h by
1) Change max_physical_apicid to static as it's only used in apic.c.
2) Kill declaration of mpc_default_type, it's never defined.
3) Delete default_acpi_madt_oem_check(), it has already been declared
in apic.h.
4) Make default_acpi_madt_oem_check() depends on CONFIG_X86_LOCAL_APIC
instead of CONFIG_X86_64 to support i386.
5) Change mp_override_legacy_irq(), mp_config_acpi_legacy_irqs() and
mp_register_gsi() as static because they are only used in acpi/boot.c.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1402302011-23642-4-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull x86 fixes from Peter Anvin:
"This is a collection of minor fixes for x86, plus the IRET information
leak fix (forbid the use of 16-bit segments in 64-bit mode)"
NOTE! We may have to relax the "forbid the use of 16-bit segments in
64-bit mode" part, since there may be people who still run and depend on
16-bit Windows binaries under Wine.
But I'm taking this in the current unconditional form for now to see who
(if anybody) screams bloody murder. Maybe nobody cares. And maybe
we'll have to update it with some kind of runtime enablement (like our
vm.mmap_min_addr tunable that people who run dosemu/qemu/wine already
need to tweak).
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels
efi: Pass correct file handle to efi_file_{read,close}
x86/efi: Correct EFI boot stub use of code32_start
x86/efi: Fix boot failure with EFI stub
x86/platform/hyperv: Handle VMBUS driver being a module
x86/apic: Reinstate error IRQ Pentium erratum 3AP workaround
x86, CMCI: Add proper detection of end of CMCI storms
Pull x86 old platform removal from Peter Anvin:
"This patchset removes support for several completely obsolete
platforms, where the maintainers either have completely vanished or
acked the removal. For some of them it is questionable if there even
exists functional specimens of the hardware"
Geert Uytterhoeven apparently thought this was a April Fool's pull request ;)
* 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, platforms: Remove NUMAQ
x86, platforms: Remove SGI Visual Workstation
x86, apic: Remove support for IBM Summit/EXA chipset
x86, apic: Remove support for ia32-based Unisys ES7000
A change introduced with commit 60283df7ac
("x86/apic: Read Error Status Register correctly") removed a read from the
APIC ESR register made before writing to same required to retrieve the
correct error status on Pentium systems affected by the 3AP erratum[1]:
"3AP. Writes to Error Register Clears Register
PROBLEM: The APIC Error register is intended to only be read.
If there is a write to this register the data in the APIC Error
register will be cleared and lost.
IMPLICATION: There is a possibility of clearing the Error
register status since the write to the register is not
specifically blocked.
WORKAROUND: Writes should not occur to the Pentium processor
APIC Error register.
STATUS: For the steppings affected see the Summary Table of
Changes at the beginning of this section."
The steppings affected are actually: B1, B3 and B5.
To avoid this information loss this change avoids the write to
ESR on all Pentium systems where it is actually never needed;
in Pentium processor documentation ESR was noted read-only and
the write only required for future architectural
compatibility[2].
The approach taken is the same as in lapic_setup_esr().
References:
[1] "Pentium Processor Family Developer's Manual", Intel Corporation,
1997, order number 241428-005, Appendix A "Errata and S-Specs for the
Pentium Processor Family", p. A-92,
[2] "Pentium Processor Family Developer's Manual, Volume 3: Architecture
and Programming Manual", Intel Corporation, 1995, order number
241430-004, Section 19.3.3. "Error Handling In APIC", p. 19-33.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Richard Weinberger <richard@nod.at>
Link: http://lkml.kernel.org/r/alpine.LFD.2.11.1404011300010.27402@eddie.linux-mips.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
apic_icr_write() and its users in smpboot.c were apparently
written under the assumption that this code would only run
during early boot. But nowadays we also execute it when onlining
a CPU later on while the system is fully running. That will make
wakeup_cpu_via_init_nmi and, thus, also native_apic_icr_write
run in plain process context. If we migrate the caller to a
different CPU at the wrong time or interrupt it and write to
ICR/ICR2 to send unrelated IPIs, we can end up sending INIT,
SIPI or NMIs to wrong CPUs.
Fix this by disabling interrupts during the write to the ICR
halves and disable preemption around waiting for ICR
availability and using it.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-By: Igor Mammedov <imammedo@redhat.com>
Link: http://lkml.kernel.org/r/52E6AFFE.3030004@siemens.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The SGI Visual Workstation seems to be dead; remove support so we
don't have to continue maintaining it.
Cc: Andrey Panin <pazke@donpac.ru>
Cc: Michael Reed <mdr@sgi.com>
Link: http://lkml.kernel.org/r/530CFD6C.7040705@zytor.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The "nox2apic" variable can be defined as __initdata since it is
only used for bootstrap. It can now unconditionally be defined
since it will later be freed.
At the same time, it is also better off as a bool.
Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1402042354380.7839@chino.kir.corp.google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make disabled_cpu_apicid static and read_mostly, and fix a couple of
typos.
Reported-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/20140115182511.GA22737@gmail.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Add disable_cpu_apicid kernel parameter. To use this kernel parameter,
specify an initial APIC ID of the corresponding CPU you want to
disable.
This is mostly used for the kdump 2nd kernel to disable BSP to wake up
multiple CPUs without causing system reset or hang due to sending INIT
from AP to BSP.
Kdump users first figure out initial APIC ID of the BSP, CPU0 in the
1st kernel, for example from /proc/cpuinfo and then set up this kernel
parameter for the 2nd kernel using the obtained APIC ID.
However, doing this procedure at each boot time manually is awkward,
which should be automatically done by user-land service scripts, for
example, kexec-tools on fedora/RHEL distributions.
This design is more flexible than disabling BSP in kernel boot time
automatically in that in kernel boot time we have no choice but
referring to ACPI/MP table to obtain initial APIC ID for BSP, meaning
that the method is not applicable to the systems without such BIOS
tables.
One assumption behind this design is that users get initial APIC ID of
the BSP in still healthy state and so BSP is uniquely kept in
CPU0. Thus, through the kernel parameter, only one initial APIC ID can
be specified.
In a comparison with disabled_cpu_apicid, we use read_apic_id(), not
boot_cpu_physical_apicid, because on some platforms, the variable is
modified to the apicid reported as BSP through MP table and this
function is executed with the temporarily modified
boot_cpu_physical_apicid. As a result, disabled_cpu_apicid kernel
parameter doesn't work well for apicids of APs.
Fixing the wrong handling of boot_cpu_physical_apicid requires some
reviews and tests beyond some platforms and it could take some
time. The fix here is a kind of workaround to focus on the main topic
of this patch.
Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Link: http://lkml.kernel.org/r/20140115064458.1545.38775.stgit@localhost6.localdomain6
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Currently we do a read, a dummy write and a final read to fetch
the error code. The value from the final read is taken.
This is not the recommended way and leads to corrupted/lost ESR
values.
Intel(c) 64 and IA-32 Architectures Software Developer's Manual,
Combined Volumes 1, 2ABC, 3ABC, Section 10.5.3 states:
Before attempt to read from the ESR, software should first
write to it. (The value written does not affect the values read
subsequently; only zero may be written in x2APIC mode.) This
write clears any previously logged errors and updates the ESR
with any errors detected since the last write to the ESR.
This write also rearms the APIC error interrupt triggering
mechanism.
This patch removes the first read such that we are conform with
the manual.
On my (very old) Pentium MMX SMP system this patch fixes the
issue that APIC errors:
a) are not always reported and
b) are reported with false error numbers.
Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: seiji.aguchi@hds.com
Cc: rientjes@google.com
Cc: konrad.wilk@oracle.com
Cc: bp@alien8.de
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1389685487-20872-1-git-send-email-richard@nod.at
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 fix from Ingo Molnar:
"A modular build fix for certain .config's"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Export 'boot_cpu_physical_apicid' to modules
Commit 9ebddac7ea "ACPI, x86: Fix extended error log driver to depend on
CONFIG_X86_LOCAL_APIC" fixed a build error when CONFIG_X86_LOCAL_APIC was not
selected and !CONFIG_SMP.
However, since CONFIG_ACPI_EXTLOG is tristate, there is a second build error:
ERROR: "boot_cpu_physical_apicid" [drivers/acpi/acpi_extlog.ko] undefined!
The symbol needs to be exported for it to be available.
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Chen Gong <gong.chen@linux.intel.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311141504080.30112@chino.kir.corp.google.com
[ Changed it to a _GPL() export. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In acpi_register_lapic(), it will generates a new logical cpu
number and maps to the local APIC id, this logical cpu number
can be returned to simplify _acpi_map_lsapic() implementation.
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Viresh Kumar