Commit Graph

6793 Commits

Author SHA1 Message Date
Linus Torvalds f75b6f303b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Clear up some recent tipc regressions because of registration
    ordering. Fix from Junwei Hu.

 2) tipc's TLV_SET() can read past the end of the supplied buffer during
    the copy. From Chris Packham.

 3) ptp example program doesn't match the kernel, from Richard Cochran.

 4) Outgoing message type fix in qrtr, from Bjorn Andersson.

 5) Flow control regression in stmmac, from Tan Tee Min.

 6) Fix inband autonegotiation in phylink, from Russell King.

 7) Fix sk_bound_dev_if handling in rawv6_bind(), from Mike Manning.

 8) Fix usbnet crash after disconnect, from Kloetzke Jan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits)
  usbnet: fix kernel crash after disconnect
  selftests: fib_rule_tests: use pre-defined DEV_ADDR
  net-next: net: Fix typos in ip-sysctl.txt
  ipv6: Consider sk_bound_dev_if when binding a raw socket to an address
  net: phylink: ensure inband AN works correctly
  usbnet: ipheth: fix racing condition
  net: stmmac: dma channel control register need to be init first
  net: stmmac: fix ethtool flow control not able to get/set
  net: qrtr: Fix message type of outgoing packets
  networking: : fix typos in code comments
  ptp: Fix example program to match kernel.
  fddi: fix typos in code comments
  selftests: fib_rule_tests: enable forwarding before ipv4 from/iif test
  selftests: fib_rule_tests: fix local IPv4 address typo
  tipc: Avoid copying bytes beyond the supplied data
  2/2] net: xilinx_emaclite: use readx_poll_timeout() in mdio wait function
  1/2] net: axienet: use readx_poll_timeout() in mdio wait function
  vlan: Mark expected switch fall-through
  macvlan: Mark expected switch fall-through
  net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages query
  ...
2019-05-22 08:28:16 -07:00
Mike Manning 72f7cfab6f ipv6: Consider sk_bound_dev_if when binding a raw socket to an address
IPv6 does not consider if the socket is bound to a device when binding
to an address. The result is that a socket can be bound to eth0 and
then bound to the address of eth1. If the device is a VRF, the result
is that a socket can only be bound to an address in the default VRF.

Resolve by considering the device if sk_bound_dev_if is set.

Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21 13:12:39 -07:00
Linus Torvalds 2c1212de6f SPDX update for 5.2-rc2, round 1
Here are series of patches that add SPDX tags to different kernel files,
 based on two different things:
   - SPDX entries are added to a bunch of files that we missed a year ago
     that do not have any license information at all.
 
     These were either missed because the tool saw the MODULE_LICENSE()
     tag, or some EXPORT_SYMBOL tags, and got confused and thought the
     file had a real license, or the files have been added since the last
     big sweep, or they were Makefile/Kconfig files, which we didn't
     touch last time.
 
   - Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
     tools can determine the license text in the file itself.  Where this
     happens, the license text is removed, in order to cut down on the
     700+ different ways we have in the kernel today, in a quest to get
     rid of all of these.
 
 These patches have been out for review on the linux-spdx@vger mailing
 list, and while they were created by automatic tools, they were
 hand-verified by a bunch of different people, all whom names are on the
 patches are reviewers.
 
 The reason for these "large" patches is if we were to continue to
 progress at the current rate of change in the kernel, adding license
 tags to individual files in different subsystems, we would be finished
 in about 10 years at the earliest.
 
 There will be more series of these types of patches coming over the next
 few weeks as the tools and reviewers crunch through the more "odd"
 variants of how to say "GPLv2" that developers have come up with over
 the years, combined with other fun oddities (GPL + a BSD disclaimer?)
 that are being unearthed, with the goal for the whole kernel to be
 cleaned up.
 
 These diffstats are not small, 3840 files are touched, over 10k lines
 removed in just 24 patches.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXOP8uw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynmGQCgy3evqzleuOITDpuWaxewFdHqiJYAnA7KRw4H
 1KwtfRnMtG6dk/XaS7H7
 =O9lH
 -----END PGP SIGNATURE-----

Merge tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull SPDX update from Greg KH:
 "Here is a series of patches that add SPDX tags to different kernel
  files, based on two different things:

   - SPDX entries are added to a bunch of files that we missed a year
     ago that do not have any license information at all.

     These were either missed because the tool saw the MODULE_LICENSE()
     tag, or some EXPORT_SYMBOL tags, and got confused and thought the
     file had a real license, or the files have been added since the
     last big sweep, or they were Makefile/Kconfig files, which we
     didn't touch last time.

   - Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
     tools can determine the license text in the file itself. Where this
     happens, the license text is removed, in order to cut down on the
     700+ different ways we have in the kernel today, in a quest to get
     rid of all of these.

  These patches have been out for review on the linux-spdx@vger mailing
  list, and while they were created by automatic tools, they were
  hand-verified by a bunch of different people, all whom names are on
  the patches are reviewers.

  The reason for these "large" patches is if we were to continue to
  progress at the current rate of change in the kernel, adding license
  tags to individual files in different subsystems, we would be finished
  in about 10 years at the earliest.

  There will be more series of these types of patches coming over the
  next few weeks as the tools and reviewers crunch through the more
  "odd" variants of how to say "GPLv2" that developers have come up with
  over the years, combined with other fun oddities (GPL + a BSD
  disclaimer?) that are being unearthed, with the goal for the whole
  kernel to be cleaned up.

  These diffstats are not small, 3840 files are touched, over 10k lines
  removed in just 24 patches"

* tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3
  ...
2019-05-21 12:33:38 -07:00
Phil Sutter e633508a95 netfilter: nft_fib: Fix existence check support
NFTA_FIB_F_PRESENT flag was not always honored since eval functions did
not call nft_fib_store_result in all cases.

Given that in all callsites there is a struct net_device pointer
available which holds the interface data to be stored in destination
register, simplify nft_fib_store_result() to just accept that pointer
instead of the nft_pktinfo pointer and interface index. This also
allows to drop the index to interface lookup previously needed to get
the name associated with given index.

Fixes: 055c4b34b9 ("netfilter: nft_fib: Support existence check")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-05-21 16:10:38 +02:00
Thomas Gleixner 1ccea77e2a treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not see http www gnu org licenses

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details [based]
  [from] [clk] [highbank] [c] you should have received a copy of the
  gnu general public license along with this program if not see http
  www gnu org licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 355 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 11:28:45 +02:00
Thomas Gleixner 3a63cbb8db treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 or
  later as published by the free software foundation

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 9 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154040.848507137@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 11:28:40 +02:00
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Thomas Gleixner 09c434b8a0 treewide: Add SPDX license identifier for more missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have MODULE_LICENCE("GPL*") inside which was used in the initial
   scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Thomas Gleixner 457c899653 treewide: Add SPDX license identifier for missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have EXPORT_.*_SYMBOL_GPL inside which was used in the
   initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Patrick Talbert ea9a03791a net: Treat sock->sk_drops as an unsigned int when printing
Currently, procfs socket stats format sk_drops as a signed int (%d). For large
values this will cause a negative number to be printed.

We know the drop count can never be a negative so change the format specifier to
%u.

Signed-off-by: Patrick Talbert <ptalbert@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-19 10:31:10 -07:00
Wei Wang 510e2ceda0 ipv6: fix src addr routing with the exception table
When inserting route cache into the exception table, the key is
generated with both src_addr and dest_addr with src addr routing.
However, current logic always assumes the src_addr used to generate the
key is a /128 host address. This is not true in the following scenarios:
1. When the route is a gateway route or does not have next hop.
   (rt6_is_gw_or_nonexthop() == false)
2. When calling ip6_rt_cache_alloc(), saddr is passed in as NULL.
This means, when looking for a route cache in the exception table, we
have to do the lookup twice: first time with the passed in /128 host
address, second time with the src_addr stored in fib6_info.

This solves the pmtu discovery issue reported by Mikael Magnusson where
a route cache with a lower mtu info is created for a gateway route with
src addr. However, the lookup code is not able to find this route cache.

Fixes: 2b760fcf5c ("ipv6: hook up exception table to store dst cache")
Reported-by: Mikael Magnusson <mikael.kernel@lists.m7n.se>
Bisected-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Cc: Martin Lau <kafai@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-16 14:30:53 -07:00
Eric Dumazet 61fb0d0168 ipv6: prevent possible fib6 leaks
At ipv6 route dismantle, fib6_drop_pcpu_from() is responsible
for finding all percpu routes and set their ->from pointer
to NULL, so that fib6_ref can reach its expected value (1).

The problem right now is that other cpus can still catch the
route being deleted, since there is no rcu grace period
between the route deletion and call to fib6_drop_pcpu_from()

This can leak the fib6 and associated resources, since no
notifier will take care of removing the last reference(s).

I decided to add another boolean (fib6_destroying) instead
of reusing/renaming exception_bucket_flushed to ease stable backports,
and properly document the memory barriers used to implement this fix.

This patch has been co-developped with Wei Wang.

Fixes: 93531c6743 ("net/ipv6: separate handling of FIB entries from dst based routes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Wei Wang <weiwan@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Martin Lau <kafai@fb.com>
Acked-by: Wei Wang <weiwan@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-16 12:21:00 -07:00
David S. Miller a9e41a5296 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Minor conflict with the DSA legacy code removal.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 17:22:09 -07:00
Stephen Suryaputra ff6ab32bd4 vrf: sit mtu should not be updated when vrf netdev is the link
VRF netdev mtu isn't typically set and have an mtu of 65536. When the
link of a tunnel is set, the tunnel mtu is changed from 1480 to the link
mtu minus tunnel header. In the case of VRF netdev is the link, then the
tunnel mtu becomes 65516. So, fix it by not setting the tunnel mtu in
this case.

Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:19:19 -07:00
Paolo Abeni 97ff7ffb11 net: use indirect calls helpers at early demux stage
So that we avoid another indirect call per RX packet, if
early demux is enabled.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 10:38:04 -07:00
Paolo Abeni 0e219ae48c net: use indirect calls helpers for L3 handler hooks
So that we avoid another indirect call per RX packet in the common
case.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 10:38:04 -07:00
David S. Miller ff24e4980a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Three trivial overlapping conflicts.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-02 22:14:21 -04:00
Martin KaFai Lau 886b7a5010 ipv6: A few fixes on dereferencing rt->from
It is a followup after the fix in
commit 9c69a13205 ("route: Avoid crash from dereferencing NULL rt->from")

rt6_do_redirect():
1. NULL checking is needed on rt->from because a parallel
   fib6_info delete could happen that sets rt->from to NULL.
   (e.g. rt6_remove_exception() and fib6_drop_pcpu_from()).

2. fib6_info_hold() is not enough.  Same reason as (1).
   Meaning, holding dst->__refcnt cannot ensure
   rt->from is not NULL or rt->from->fib6_ref is not 0.

   Instead of using fib6_info_hold_safe() which ip6_rt_cache_alloc()
   is already doing, this patch chooses to extend the rcu section
   to keep "from" dereference-able after checking for NULL.

inet6_rtm_getroute():
1. NULL checking is also needed on rt->from for a similar reason.
   Note that inet6_rtm_getroute() is using RTNL_FLAG_DOIT_UNLOCKED.

Fixes: a68886a691 ("net/ipv6: Make from in rt6_info rcu protected")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Wei Wang <weiwan@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01 17:17:54 -04:00
Eric Dumazet 0e23387491 ipv6: fix races in ip6_dst_destroy()
We had many syzbot reports that seem to be caused by use-after-free
of struct fib6_info.

ip6_dst_destroy(), fib6_drop_pcpu_from() and rt6_remove_exception()
are writers vs rt->from, and use non consistent synchronization among
themselves.

Switching to xchg() will solve the issues with no possible
lockdep issues.

BUG: KASAN: user-memory-access in atomic_dec_and_test include/asm-generic/atomic-instrumented.h:747 [inline]
BUG: KASAN: user-memory-access in fib6_info_release include/net/ip6_fib.h:294 [inline]
BUG: KASAN: user-memory-access in fib6_info_release include/net/ip6_fib.h:292 [inline]
BUG: KASAN: user-memory-access in fib6_drop_pcpu_from net/ipv6/ip6_fib.c:927 [inline]
BUG: KASAN: user-memory-access in fib6_purge_rt+0x4f6/0x670 net/ipv6/ip6_fib.c:960
Write of size 4 at addr 0000000000ffffb4 by task syz-executor.1/7649

CPU: 0 PID: 7649 Comm: syz-executor.1 Not tainted 5.1.0-rc6+ #183
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 kasan_report.cold+0x5/0x40 mm/kasan/report.c:321
 check_memory_region_inline mm/kasan/generic.c:185 [inline]
 check_memory_region+0x123/0x190 mm/kasan/generic.c:191
 kasan_check_write+0x14/0x20 mm/kasan/common.c:108
 atomic_dec_and_test include/asm-generic/atomic-instrumented.h:747 [inline]
 fib6_info_release include/net/ip6_fib.h:294 [inline]
 fib6_info_release include/net/ip6_fib.h:292 [inline]
 fib6_drop_pcpu_from net/ipv6/ip6_fib.c:927 [inline]
 fib6_purge_rt+0x4f6/0x670 net/ipv6/ip6_fib.c:960
 fib6_del_route net/ipv6/ip6_fib.c:1813 [inline]
 fib6_del+0xac2/0x10a0 net/ipv6/ip6_fib.c:1844
 fib6_clean_node+0x3a8/0x590 net/ipv6/ip6_fib.c:2006
 fib6_walk_continue+0x495/0x900 net/ipv6/ip6_fib.c:1928
 fib6_walk+0x9d/0x100 net/ipv6/ip6_fib.c:1976
 fib6_clean_tree+0xe0/0x120 net/ipv6/ip6_fib.c:2055
 __fib6_clean_all+0x118/0x2a0 net/ipv6/ip6_fib.c:2071
 fib6_clean_all+0x2b/0x40 net/ipv6/ip6_fib.c:2082
 rt6_sync_down_dev+0x134/0x150 net/ipv6/route.c:4057
 rt6_disable_ip+0x27/0x5f0 net/ipv6/route.c:4062
 addrconf_ifdown+0xa2/0x1220 net/ipv6/addrconf.c:3705
 addrconf_notify+0x19a/0x2260 net/ipv6/addrconf.c:3630
 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1753
 call_netdevice_notifiers_extack net/core/dev.c:1765 [inline]
 call_netdevice_notifiers net/core/dev.c:1779 [inline]
 dev_close_many+0x33f/0x6f0 net/core/dev.c:1522
 rollback_registered_many+0x43b/0xfd0 net/core/dev.c:8177
 rollback_registered+0x109/0x1d0 net/core/dev.c:8242
 unregister_netdevice_queue net/core/dev.c:9289 [inline]
 unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9282
 unregister_netdevice include/linux/netdevice.h:2658 [inline]
 __tun_detach+0xd5b/0x1000 drivers/net/tun.c:727
 tun_detach drivers/net/tun.c:744 [inline]
 tun_chr_close+0xe0/0x180 drivers/net/tun.c:3443
 __fput+0x2e5/0x8d0 fs/file_table.c:278
 ____fput+0x16/0x20 fs/file_table.c:309
 task_work_run+0x14a/0x1c0 kernel/task_work.c:113
 exit_task_work include/linux/task_work.h:22 [inline]
 do_exit+0x90a/0x2fa0 kernel/exit.c:876
 do_group_exit+0x135/0x370 kernel/exit.c:980
 __do_sys_exit_group kernel/exit.c:991 [inline]
 __se_sys_exit_group kernel/exit.c:989 [inline]
 __x64_sys_exit_group+0x44/0x50 kernel/exit.c:989
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458da9
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffeafc2a6a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 000000000000001c RCX: 0000000000458da9
RDX: 0000000000412a80 RSI: 0000000000a54ef0 RDI: 0000000000000043
RBP: 00000000004be552 R08: 000000000000000c R09: 000000000004c0d1
R10: 0000000002341940 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00007ffeafc2a7f0 R14: 000000000004c065 R15: 00007ffeafc2a800

Fixes: a68886a691 ("net/ipv6: Make from in rt6_info rcu protected")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: David Ahern <dsahern@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 23:38:38 -04:00
David S. Miller a658a3f2ec Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2019-04-30

1) A lot of work to remove indirections from the xfrm code.
   From Florian Westphal.

2) Support ESP offload in combination with gso partial.
   From Boris Pismenny.

3) Remove some duplicated code from vti4.
   From Jeremy Sowden.

Please note that there is merge conflict

between commit:

8742dc86d0 ("xfrm4: Fix uninitialized memory read in _decode_session4")

from the ipsec tree and commit:

c53ac41e37 ("xfrm: remove decode_session indirection from afinfo_policy")

from the ipsec-next tree. The merge conflict will appear
when those trees get merged during the merge window.
The conflict can be solved as it is done in linux-next:

https://lkml.org/lkml/2019/4/25/1207

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 09:26:13 -04:00
David S. Miller b145745fc8 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:

====================
pull request (net): ipsec 2019-04-30

1) Fix an out-of-bound array accesses in __xfrm_policy_unlink.
   From YueHaibing.

2) Reset the secpath on failure in the ESP GRO handlers
   to avoid dereferencing an invalid pointer on error.
   From Myungho Jung.

3) Add and revert a patch that tried to add rcu annotations
   to netns_xfrm. From Su Yanjun.

4) Wait for rcu callbacks before freeing xfrm6_tunnel_spi_kmem.
   From Su Yanjun.

5) Fix forgotten vti4 ipip tunnel deregistration.
   From Jeremy Sowden:

6) Remove some duplicated log messages in vti4.
   From Jeremy Sowden.

7) Don't use IPSEC_PROTO_ANY when flushing states because
   this will flush only IPsec portocol speciffic states.
   IPPROTO_ROUTING states may remain in the lists when
   doing net exit. Fix this by replacing IPSEC_PROTO_ANY
   with zero. From Cong Wang.

8) Add length check for UDP encapsulation to fix "Oversized IP packet"
   warnings on receive side. From Sabrina Dubroca.

9) Fix xfrm interface lookup when the interface is associated to
   a vrf layer 3 master device. From Martin Willi.

10) Reload header pointers after pskb_may_pull() in _decode_session4(),
    otherwise we may read from uninitialized memory.

11) Update the documentation about xfrm[46]_gc_thresh, it
    is not used anymore after the flowcache removal.
    From Nicolas Dichtel.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 09:11:10 -04:00
Eric Dumazet 6c0afef5fb ipv6/flowlabel: wait rcu grace period before put_pid()
syzbot was able to catch a use-after-free read in pid_nr_ns() [1]

ip6fl_seq_show() seems to use RCU protection, dereferencing fl->owner.pid
but fl_free() releases fl->owner.pid before rcu grace period is started.

[1]

BUG: KASAN: use-after-free in pid_nr_ns+0x128/0x140 kernel/pid.c:407
Read of size 4 at addr ffff888094012a04 by task syz-executor.0/18087

CPU: 0 PID: 18087 Comm: syz-executor.0 Not tainted 5.1.0-rc6+ #89
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131
 pid_nr_ns+0x128/0x140 kernel/pid.c:407
 ip6fl_seq_show+0x2f8/0x4f0 net/ipv6/ip6_flowlabel.c:794
 seq_read+0xad3/0x1130 fs/seq_file.c:268
 proc_reg_read+0x1fe/0x2c0 fs/proc/inode.c:227
 do_loop_readv_writev fs/read_write.c:701 [inline]
 do_loop_readv_writev fs/read_write.c:688 [inline]
 do_iter_read+0x4a9/0x660 fs/read_write.c:922
 vfs_readv+0xf0/0x160 fs/read_write.c:984
 kernel_readv fs/splice.c:358 [inline]
 default_file_splice_read+0x475/0x890 fs/splice.c:413
 do_splice_to+0x12a/0x190 fs/splice.c:876
 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:953
 do_splice_direct+0x1da/0x2a0 fs/splice.c:1062
 do_sendfile+0x597/0xd00 fs/read_write.c:1443
 __do_sys_sendfile64 fs/read_write.c:1498 [inline]
 __se_sys_sendfile64 fs/read_write.c:1490 [inline]
 __x64_sys_sendfile64+0x15a/0x220 fs/read_write.c:1490
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458da9
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f300d24bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000458da9
RDX: 00000000200000c0 RSI: 0000000000000008 RDI: 0000000000000007
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000005a R11: 0000000000000246 R12: 00007f300d24c6d4
R13: 00000000004c5fa3 R14: 00000000004da748 R15: 00000000ffffffff

Allocated by task 17543:
 save_stack+0x45/0xd0 mm/kasan/common.c:75
 set_track mm/kasan/common.c:87 [inline]
 __kasan_kmalloc mm/kasan/common.c:497 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470
 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505
 slab_post_alloc_hook mm/slab.h:437 [inline]
 slab_alloc mm/slab.c:3393 [inline]
 kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555
 alloc_pid+0x55/0x8f0 kernel/pid.c:168
 copy_process.part.0+0x3b08/0x7980 kernel/fork.c:1932
 copy_process kernel/fork.c:1709 [inline]
 _do_fork+0x257/0xfd0 kernel/fork.c:2226
 __do_sys_clone kernel/fork.c:2333 [inline]
 __se_sys_clone kernel/fork.c:2327 [inline]
 __x64_sys_clone+0xbf/0x150 kernel/fork.c:2327
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 7789:
 save_stack+0x45/0xd0 mm/kasan/common.c:75
 set_track mm/kasan/common.c:87 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:459
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:467
 __cache_free mm/slab.c:3499 [inline]
 kmem_cache_free+0x86/0x260 mm/slab.c:3765
 put_pid.part.0+0x111/0x150 kernel/pid.c:111
 put_pid+0x20/0x30 kernel/pid.c:105
 fl_free+0xbe/0xe0 net/ipv6/ip6_flowlabel.c:102
 ip6_fl_gc+0x295/0x3e0 net/ipv6/ip6_flowlabel.c:152
 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325
 expire_timers kernel/time/timer.c:1362 [inline]
 __run_timers kernel/time/timer.c:1681 [inline]
 __run_timers kernel/time/timer.c:1649 [inline]
 run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694
 __do_softirq+0x266/0x95a kernel/softirq.c:293

The buggy address belongs to the object at ffff888094012a00
 which belongs to the cache pid_2 of size 88
The buggy address is located 4 bytes inside of
 88-byte region [ffff888094012a00, ffff888094012a58)
The buggy address belongs to the page:
page:ffffea0002500480 count:1 mapcount:0 mapping:ffff88809a483080 index:0xffff888094012980
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea00018a3508 ffffea0002524a88 ffff88809a483080
raw: ffff888094012980 ffff888094012000 000000010000001b 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888094012900: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
 ffff888094012980: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
>ffff888094012a00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
                   ^
 ffff888094012a80: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
 ffff888094012b00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc

Fixes: 4f82f45730 ("net ip6 flowlabel: Make owner a union of struct pid * and kuid_t")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29 23:30:13 -04:00
Stephen Suryaputra 1d3fd8a10b vrf: Use orig netdev to count Ip6InNoRoutes and a fresh route lookup when sending dest unreach
When there is no route to an IPv6 dest addr, skb_dst(skb) points
to loopback dev in the case of that the IP6CB(skb)->iif is
enslaved to a vrf. This causes Ip6InNoRoutes to be incremented on the
loopback dev. This also causes the lookup to fail on icmpv6_send() and
the dest unreachable to not sent and Ip6OutNoRoutes gets incremented on
the loopback dev.

To reproduce:
* Gateway configuration:
        ip link add dev vrf_258 type vrf table 258
        ip link set dev enp0s9 master vrf_258
        ip addr add 66:1/64 dev enp0s9
        ip -6 route add unreachable default metric 8192 table 258
        sysctl -w net.ipv6.conf.all.forwarding=1
        sysctl -w net.ipv6.conf.enp0s9.forwarding=1
* Sender configuration:
        ip addr add 66::2/64 dev enp0s9
        ip -6 route add default via 66::1
and ping 67::1 for example from the sender.

Fix this by counting on the original netdev and reset the skb dst to
force a fresh lookup.

v2: Fix typo of destination address in the repro steps.
v3: Simplify the loopback check (per David Ahern) and use reverse
    Christmas tree format (per David Miller).

Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29 23:28:52 -04:00
Willem de Bruijn 95c169251b ipv6: invert flowlabel sharing check in process and user mode
A request for a flowlabel fails in process or user exclusive mode must
fail if the caller pid or uid does not match. Invert the test.

Previously, the test was unsafe wrt PID recycling, but indeed tested
for inequality: fl1->owner != fl->owner

Fixes: 4f82f45730 ("net ip6 flowlabel: Make owner a union of struct pid* and kuid_t")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29 18:22:56 -04:00
Johannes Berg ef6243acb4 genetlink: optionally validate strictly/dumps
Add options to strictly validate messages and dump messages,
sometimes perhaps validating dump messages non-strictly may
be required, so add an option for that as well.

Since none of this can really be applied to existing commands,
set the options everwhere using the following spatch:

    @@
    identifier ops;
    expression X;
    @@
    struct genl_ops ops[] = {
    ...,
     {
            .cmd = X,
    +       .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
            ...
     },
    ...
    };

For new commands one should just not copy the .validate 'opt-out'
flags and thus get strict validation.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:07:22 -04:00
Johannes Berg 8cb081746c netlink: make validation more configurable for future strictness
We currently have two levels of strict validation:

 1) liberal (default)
     - undefined (type >= max) & NLA_UNSPEC attributes accepted
     - attribute length >= expected accepted
     - garbage at end of message accepted
 2) strict (opt-in)
     - NLA_UNSPEC attributes accepted
     - attribute length >= expected accepted

Split out parsing strictness into four different options:
 * TRAILING     - check that there's no trailing data after parsing
                  attributes (in message or nested)
 * MAXTYPE      - reject attrs > max known type
 * UNSPEC       - reject attributes with NLA_UNSPEC policy entries
 * STRICT_ATTRS - strictly validate attribute size

The default for future things should be *everything*.
The current *_strict() is a combination of TRAILING and MAXTYPE,
and is renamed to _deprecated_strict().
The current regular parsing has none of this, and is renamed to
*_parse_deprecated().

Additionally it allows us to selectively set one of the new flags
even on old policies. Notably, the UNSPEC flag could be useful in
this case, since it can be arranged (by filling in the policy) to
not be an incompatible userspace ABI change, but would then going
forward prevent forgetting attribute entries. Similar can apply
to the POLICY flag.

We end up with the following renames:
 * nla_parse           -> nla_parse_deprecated
 * nla_parse_strict    -> nla_parse_deprecated_strict
 * nlmsg_parse         -> nlmsg_parse_deprecated
 * nlmsg_parse_strict  -> nlmsg_parse_deprecated_strict
 * nla_parse_nested    -> nla_parse_nested_deprecated
 * nla_validate_nested -> nla_validate_nested_deprecated

Using spatch, of course:
    @@
    expression TB, MAX, HEAD, LEN, POL, EXT;
    @@
    -nla_parse(TB, MAX, HEAD, LEN, POL, EXT)
    +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT)

    @@
    expression NLH, HDRLEN, TB, MAX, POL, EXT;
    @@
    -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT)
    +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT)

    @@
    expression NLH, HDRLEN, TB, MAX, POL, EXT;
    @@
    -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT)
    +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT)

    @@
    expression TB, MAX, NLA, POL, EXT;
    @@
    -nla_parse_nested(TB, MAX, NLA, POL, EXT)
    +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT)

    @@
    expression START, MAX, POL, EXT;
    @@
    -nla_validate_nested(START, MAX, POL, EXT)
    +nla_validate_nested_deprecated(START, MAX, POL, EXT)

    @@
    expression NLH, HDRLEN, MAX, POL, EXT;
    @@
    -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT)
    +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT)

For this patch, don't actually add the strict, non-renamed versions
yet so that it breaks compile if I get it wrong.

Also, while at it, make nla_validate and nla_parse go down to a
common __nla_validate_parse() function to avoid code duplication.

Ultimately, this allows us to have very strict validation for every
new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the
next patch, while existing things will continue to work as is.

In effect then, this adds fully strict validation for any new command.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:07:21 -04:00
Michal Kubecek ae0be8de9a netlink: make nla_nest_start() add NLA_F_NESTED flag
Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most
netlink based interfaces (including recently added ones) are still not
setting it in kernel generated messages. Without the flag, message parsers
not aware of attribute semantics (e.g. wireshark dissector or libmnl's
mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display
the structure of their contents.

Unfortunately we cannot just add the flag everywhere as there may be
userspace applications which check nlattr::nla_type directly rather than
through a helper masking out the flags. Therefore the patch renames
nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start()
as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually
are rewritten to use nla_nest_start().

Except for changes in include/net/netlink.h, the patch was generated using
this semantic patch:

@@ expression E1, E2; @@
-nla_nest_start(E1, E2)
+nla_nest_start_noflag(E1, E2)

@@ expression E1, E2; @@
-nla_nest_start_noflag(E1, E2 | NLA_F_NESTED)
+nla_nest_start(E1, E2)

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:03:44 -04:00
David S. Miller 8b44836583 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Two easy cases of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 23:52:29 -04:00
David Ahern a65120bae4 ipv6: Use result arg in fib_lookup_arg consistently
arg.result is sometimes used as fib6_result and sometimes used to
hold the rt6_info. Add rt6_info to fib6_result and make the use
of arg.result consistent through ipv6 rules.

The rt6 entry is filled in for lookups returning a dst_entry, but not
for direct fib_lookups that just want a fib6_info.

Fixes: effda4dd97 ("ipv6: Pass fib6_result to fib lookups")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23 21:53:11 -07:00
David Ahern b2f97f7de2 ipv6: fib6_rule_action_alt needs to return -EAGAIN
fib rule actions should return -EAGAIN for the rules to continue to the
next one. A recent change overwrote err with the lookup always returning
0 (future change will make it more like IPv4) which means the rules
stopped at the first (e.g., local table lookup only). Catch and reset err
to -EAGAIN.

Fixes: effda4dd97 ("ipv6: Pass fib6_result to fib lookups")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23 21:52:33 -07:00
David Ahern ecc5663cce net: Change nhc_flags to unsigned char
nhc_flags holds the RTNH_F flags for a given nexthop (fib{6}_nh).
All of the RTNH_F_ flags fit in an unsigned char, and since the API to
userspace (rtnh_flags and lower byte of rtm_flags) is 1 byte it can not
grow. Make nhc_flags in fib_nh_common an unsigned char and shrink the
size of the struct by 8, from 56 to 48 bytes.

Update the flags arguments for up netdevice events and fib_nexthop_info
which determines the RTNH_F flags to return on a dump/event. The RTNH_F
flags are passed in the lower byte of rtm_flags which is an unsigned int
so use a temp variable for the flags to fib_nexthop_info and combine
with rtm_flags in the caller.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23 19:44:18 -07:00
Eric Dumazet f05713e091 ipv6: convert fib6_ref to refcount_t
We suspect some issues involving fib6_ref 0 -> 1 transitions might
cause strange syzbot reports.

Lets convert fib6_ref to refcount_t to catch them earlier.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23 17:19:48 -07:00
Eric Dumazet 5ea715289a ipv6: broadly use fib6_info_hold() helper
Instead of using atomic_inc(), prefer fib6_info_hold()
so that upcoming refcount_t conversion is simpler.

Only fib6_info_alloc() is using atomic_set() since we
just allocated a new object.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23 17:19:48 -07:00
Eric Dumazet b027055022 ipv6: fib6_info_destroy_rcu() cleanup
We do not need to clear f6i->rt6i_exception_bucket right before
freeing f6i.

Note that f6i->rt6i_exception_bucket is properly protected by
f6i->exception_bucket_flushed being set to one in rt6_flush_exceptions()
under the protection of rt6_exception_lock.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23 17:19:48 -07:00
Florian Westphal bb9cd077e2 xfrm: remove unneeded export_symbols
None of them have any external callers, make them static.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-23 07:42:20 +02:00
Florian Westphal c53ac41e37 xfrm: remove decode_session indirection from afinfo_policy
No external dependencies, might as well handle this directly.
xfrm_afinfo_policy is now 40 bytes on x86_64.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-23 07:42:20 +02:00
Florian Westphal 2e8b4aa816 xfrm: remove init_path indirection from afinfo_policy
handle this directly, its only used by ipv6.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-23 07:42:20 +02:00
Florian Westphal f24ea52873 xfrm: remove tos indirection from afinfo_policy
Only used by ipv4, we can read the fl4 tos value directly instead.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-23 07:42:20 +02:00
David Ahern 3c618c1dbb net: Rename net/nexthop.h net/rtnh.h
The header contains rtnh_ macros so rename the file accordingly.
Allows a later patch to use the nexthop.h name for the new
nexthop code.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-22 21:47:25 -07:00
Arnd Bergmann c7cbdbf29f net: rework SIOCGSTAMP ioctl handling
The SIOCGSTAMP/SIOCGSTAMPNS ioctl commands are implemented by many
socket protocol handlers, and all of those end up calling the same
sock_get_timestamp()/sock_get_timestampns() helper functions, which
results in a lot of duplicate code.

With the introduction of 64-bit time_t on 32-bit architectures, this
gets worse, as we then need four different ioctl commands in each
socket protocol implementation.

To simplify that, let's add a new .gettstamp() operation in
struct proto_ops, and move ioctl implementation into the common
sock_ioctl()/compat_sock_ioctl_trans() functions that these all go
through.

We can reuse the sock_get_timestamp() implementation, but generalize
it so it can deal with both native and compat mode, as well as
timeval and timespec structures.

Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/lkml/CAK8P3a038aDQQotzua_QtKGhq8O9n+rdiz2=WDCp82ys8eUT+A@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19 14:07:40 -07:00
Stephen Suryaputra 0bc1998544 ipv6: Add rate limit mask for ICMPv6 messages
To make ICMPv6 closer to ICMPv4, add ratemask parameter. Since the ICMP
message types use larger numeric values, a simple bitmask doesn't fit.
I use large bitmap. The input and output are the in form of list of
ranges. Set the default to rate limit all error messages but Packet Too
Big. For Packet Too Big, use ratemask instead of hard-coded.

There are functions where icmpv6_xrlim_allow() and icmpv6_global_allow()
aren't called. This patch only adds them to icmpv6_echo_reply().

Rate limiting error messages is mandated by RFC 4443 but RFC 4890 says
that it is also acceptable to rate limit informational messages. Thus,
I removed the current hard-coded behavior of icmpv6_mask_allow() that
doesn't rate limit informational messages.

v2: Add dummy function proc_do_large_bitmap() if CONFIG_PROC_SYSCTL
    isn't defined, expand the description in ip-sysctl.txt and remove
    unnecessary conditional before kfree().
v3: Inline the bitmap instead of dynamically allocated. Still is a
    pointer to it is needed because of the way proc_do_large_bitmap work.

Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18 16:58:37 -07:00
Colin Ian King d5f6db3538 net: ipv6: addrlabel: fix spelling mistake "requewst" -> "request"
There is a spelling mistake in a NL_SET_ERR_MSG_MOD error message,
fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18 10:44:17 -07:00
David Ahern b8fb1ab461 net ipv6: Prevent neighbor add if protocol is disabled on device
Disabling IPv6 on an interface removes existing entries but nothing prevents
new entries from being manually added. To that end, add a new neigh_table
operation, allow_add, that is called on RTM_NEWNEIGH to see if neighbor
entries are allowed on a given device. If IPv6 is disabled on the device,
allow_add returns false and passes a message back to the user via extack.

  $ echo 1 > /proc/sys/net/ipv6/conf/eth1/disable_ipv6
  $ ip -6 neigh add fe80::4c88:bff:fe21:2704 dev eth1 lladdr de:ad:be:ef:01:01
  Error: IPv6 is disabled on this device.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17 23:19:07 -07:00
David Ahern 7d21fec904 ipv6: Add fib6_type and fib6_flags to fib6_result
Add the fib6_flags and fib6_type to fib6_result. Update the lookup helpers
to set them and update post fib lookup users to use the version from the
result.

This allows nexthop objects to have blackhole nexthop.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17 23:11:30 -07:00
David Ahern effda4dd97 ipv6: Pass fib6_result to fib lookups
Change fib6_lookup and fib6_table_lookup to take a fib6_result and set
f6i and nh rather than returning a fib6_info. For now both always
return 0.

A later patch set can make these more like the IPv4 counterparts and
return EINVAL, EACCESS, etc based on fib6_type.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17 23:10:47 -07:00
David Ahern 8ff2e5b26c ipv6: Pass fib6_result to fib6_table_lookup tracepoint
Change fib6_table_lookup tracepoint to take the fib6_result and use
the fib6_info and fib6_nh from it.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17 23:10:47 -07:00
David Ahern b7bc4b6a62 ipv6: Pass fib6_result to rt6_select and find_rr_leaf
Pass fib6_result to rt6_select. Instead of returning the fib entry, it
will set f6i and nh based on the lookup.

find_rr_leaf is changed to remove the match option in favor of taking
fib6_result and having __find_rr_leaf set f6i in the result.

In the process, update fib6_info references in __find_rr_leaf to f6i names.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17 23:10:47 -07:00
David Ahern 75ef7389dd ipv6: Pass fib6_result to rt6_device_match
Pass fib6_result to rt6_device_match with f6i set. rt6_device_match
updates f6i in the result if it finds a better match and sets nh.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17 23:10:47 -07:00
David Ahern b748f26092 ipv6: Pass fib6_result to ip6_mtu_from_fib6 and fib6_mtu
Change ip6_mtu_from_fib6 and fib6_mtu to take a fib6_result over a
fib6_info. Update both to use the fib6_nh from fib6_result.

Since the signature of ip6_mtu_from_fib6 is already changing, add const
to daddr and saddr.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17 23:10:46 -07:00
David Ahern 5012f0a594 ipv6: Pass fib6_result to rt6_insert_exception
Update rt6_insert_exception to take a fib6_result over a fib6_info.
Change ort to f6i from the fib6_result and rename to better reflect
what it references (a fib6_info).

Since this function is already getting changed, update the comments
to reference fib6_info variables rather than the older rt6_info.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17 23:10:46 -07:00
David Ahern 0d16158149 ipv6: Pass fib6_result to ip6_rt_get_dev_rcu and ip6_rt_copy_init
Now that all callers are update to have a fib6_result, pass it down
to ip6_rt_get_dev_rcu, ip6_rt_copy_init, and ip6_rt_init_dst.

In the process, change ort to f6i in ip6_rt_copy_init to make it
clear it is a reference to a fib6_info.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17 23:10:46 -07:00
David Ahern db3fedee0c ipv6: Pass fib6_result to pcpu route functions
Update ip6_rt_pcpu_alloc, rt6_get_pcpu_route and rt6_make_pcpu_route
to a fib6_result over a fib6_info.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17 23:10:46 -07:00
David Ahern 9b6b35abfb ipv6: Pass fib6_result to ip6_create_rt_rcu
Change ip6_create_rt_rcu to take fib6_result over a fib6_info.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17 23:10:46 -07:00
David Ahern 85bd05deb3 ipv6: Pass fib6_result to ip6_rt_cache_alloc
Change ip6_rt_cache_alloc to take a fib6_result over a fib6_info.

Since ip6_rt_cache_alloc is only the caller, update the
rt6_is_gw_or_nonexthop helper to take fib6_result.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17 23:10:46 -07:00
David Ahern 7e4b512875 ipv6: Pass fib6_result to rt6_find_cached_rt
Simplify rt6_find_cached_rt for the fast path cases and pass fib6_result
to rt6_find_cached_rt. Rename the local return variable to ret to maintain
consisting with fib6_result name.

Update the comment in rt6_find_cached_rt to reference the new names in
a fib6_info vs the old name when fib entries were an rt6_info.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17 23:08:51 -07:00
David Ahern b1d4099150 ipv6: Rename fib6_multipath_select and pass fib6_result
Add 'struct fib6_result' to hold the fib entry and fib6_nh from a fib
lookup as separate entries, similar to what IPv4 now has with fib_result.

Rename fib6_multipath_select to fib6_select_path, pass fib6_result to
it, and set f6i and nh in the result once a path selection is done.
Call fib6_select_path unconditionally for path selection which means
moving the sibling and oif check to fib6_select_path. To handle the two
different call paths (2 only call multipath_select if flowi6_oif == 0 and
the other always calls it), add a new have_oif_match that controls the
sibling walk if relevant.

Update callers of fib6_multipath_select accordingly and have them use the
fib6_info and fib6_nh from the result.

This is needed for multipath nexthop objects where a single f6i can
point to multiple fib6_nh (similar to IPv4).

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17 23:08:51 -07:00
David S. Miller 6b0a7f84ea Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflict resolution of af_smc.c from Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17 11:26:25 -07:00
Jonathan Lemon 9c69a13205 route: Avoid crash from dereferencing NULL rt->from
When __ip6_rt_update_pmtu() is called, rt->from is RCU dereferenced, but is
never checked for null - rt6_flush_exceptions() may have removed the entry.

[ 1913.989004] RIP: 0010:ip6_rt_cache_alloc+0x13/0x170
[ 1914.209410] Call Trace:
[ 1914.214798]  <IRQ>
[ 1914.219226]  __ip6_rt_update_pmtu+0xb0/0x190
[ 1914.228649]  ip6_tnl_xmit+0x2c2/0x970 [ip6_tunnel]
[ 1914.239223]  ? ip6_tnl_parse_tlv_enc_lim+0x32/0x1a0 [ip6_tunnel]
[ 1914.252489]  ? __gre6_xmit+0x148/0x530 [ip6_gre]
[ 1914.262678]  ip6gre_tunnel_xmit+0x17e/0x3c7 [ip6_gre]
[ 1914.273831]  dev_hard_start_xmit+0x8d/0x1f0
[ 1914.283061]  sch_direct_xmit+0xfa/0x230
[ 1914.291521]  __qdisc_run+0x154/0x4b0
[ 1914.299407]  net_tx_action+0x10e/0x1f0
[ 1914.307678]  __do_softirq+0xca/0x297
[ 1914.315567]  irq_exit+0x96/0xa0
[ 1914.322494]  smp_apic_timer_interrupt+0x68/0x130
[ 1914.332683]  apic_timer_interrupt+0xf/0x20
[ 1914.341721]  </IRQ>

Fixes: a68886a691 ("net/ipv6: Make from in rt6_info rcu protected")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15 13:31:59 -07:00
David S. Miller 95337b9821 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter updates for net-next:

1) Remove the broute pseudo hook, implement this from the bridge
   prerouting hook instead. Now broute becomes real table in ebtables,
   from Florian Westphal. This also includes a size reduction patch for the
   bridge control buffer area via squashing boolean into bitfields and
   a selftest.

2) Add OS passive fingerprint version matching, from Fernando Fernandez.

3) Support for gue encapsulation for IPVS, from Jacky Hu.

4) Add support for NAT to the inet family, from Florian Westphal.
   This includes support for masquerade, redirect and nat extensions.

5) Skip interface lookup in flowtable, use device in the dst object.

6) Add jiffies64_to_msecs() and use it, from Li RongQing.

7) Remove unused parameter in nf_tables_set_desc_parse(), from Colin Ian King.

8) Statify several functions, patches from YueHaibing and Florian Westphal.

9) Add an optimized version of nf_inet_addr_cmp(), from Li RongQing.

10) Merge route extension to core, also from Florian.

11) Use IS_ENABLED(CONFIG_NF_NAT) instead of NF_NAT_NEEDED, from Florian.

12) Merge ip/ip6 masquerade extensions, from Florian. This includes
    netdevice notifier unification.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15 12:07:35 -07:00
David Ahern 1deeb6408c ipv6: Remove flowi6_oif compare from __ip6_route_redirect
In the review of 0b34eb0043 ("ipv6: Refactor __ip6_route_redirect"),
Martin noted that the flowi6_oif compare is moved to the new helper and
should be removed from __ip6_route_redirect. Fix the oversight.

Fixes: 0b34eb0043 ("ipv6: Refactor __ip6_route_redirect")
Reported-by: Martin Lau <kafai@fb.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 17:05:38 -07:00
Tetsuo Handa bddc028a4f udpv6: Check address length before reading address family
KMSAN will complain if valid address length passed to udpv6_pre_connect()
is shorter than sizeof("struct sockaddr"->sa_family) bytes.

(This patch is bogus if it is guaranteed that udpv6_pre_connect() is
always called after checking "struct sockaddr"->sa_family. In that case,
we want a comment why we don't need to check valid address length here.)

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 10:25:03 -07:00
David Ahern 0b34eb0043 ipv6: Refactor __ip6_route_redirect
Move the nexthop evaluation of a fib entry to a helper that can be
leveraged for each fib6_nh in a multipath nexthop object.

In the move, 'continue' statements means the helper returns false
(loop should continue) and 'break' means return true (found the entry
of interest).

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:07 -07:00
David Ahern 0c59d00675 ipv6: Refactor rt6_device_match
Move the device and gateway checks in the fib6_next loop to a helper
that can be called per fib6_nh entry.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:07 -07:00
David Ahern d83009d462 ipv6: Move fib6_multipath_select down in ip6_pol_route
Move the siblings and fib6_multipath_select after the null entry check
since a null entry can not have siblings.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:06 -07:00
David Ahern af52a52cba ipv6: Be smarter with null_entry handling in ip6_pol_route_lookup
Clean up the fib6_null_entry handling in ip6_pol_route_lookup.
rt6_device_match can return fib6_null_entry, but fib6_multipath_select
can not. Consolidate the fib6_null_entry handling and on the final
null_entry check set rt and goto out - no need to defer to a second
check after rt6_find_cached_rt.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:06 -07:00
David Ahern 30c15f0338 ipv6: Refactor find_rr_leaf
find_rr_leaf has 3 loops over fib_entries calling find_match. The loops
are very similar with differences in start point and whether the metric
is evaluated:
    1. start at rr_head, no extra loop compare, check fib metric
    2. start at leaf, compare rt against rr_head, check metric
    3. start at cont (potential saved point from earlier loops), no
       extra loop compare, no metric check

Create 1 loop that is called 3 different times. This will make a
later change with multipath nexthop objects much simpler.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:06 -07:00
David Ahern 28679ed104 ipv6: Refactor find_match
find_match primarily needs a fib6_nh (and fib6_flags which it passes
through to rt6_score_route). Move fib6_check_expired up to the call
sites so find_match is only called for relevant entries. Remove the
match argument which is mostly a pass through and use the return
boolean to decide if match gets set in the call sites.

The end result is a helper that can be called per fib6_nh struct
which is needed once fib entries reference nexthop objects that
have more than one fib6_nh.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:06 -07:00
David Ahern 702cea5685 ipv6: Pass fib6_nh and flags to rt6_score_route
rt6_score_route only needs the fib6_flags and nexthop data. Change
it accordingly. Allows re-use later for nexthop based fib6_nh.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:06 -07:00
David Ahern cc3a86c802 ipv6: Change rt6_probe to take a fib6_nh
rt6_probe sends probes for gateways in a nexthop. As such it really
depends on a fib6_nh, not a fib entry. Move last_probe to fib6_nh and
update rt6_probe to a fib6_nh struct.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:06 -07:00
David Ahern 6e1809a564 ipv6: Remove rt6_check_dev
rt6_check_dev is a simpler helper with only 1 caller. Fold the code
into rt6_score_route.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:06 -07:00
David Ahern 1ba9a89517 ipv6: Only call rt6_check_neigh for nexthop with gateway
Change rt6_check_neigh to take a fib6_nh instead of a fib entry.
Move the check on fib_flags and whether the nexthop has a gateway
up to the one caller.

Remove the inline from the definition as well. Not necessary.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:06 -07:00
Florian Westphal adf82accc5 netfilter: x_tables: merge ip and ipv6 masquerade modules
No need to have separate modules for this.
before:
 text    data   bss    dec  filename
 2038    1168     0   3206  net/ipv4/netfilter/ipt_MASQUERADE.ko
 1526    1024     0   2550  net/ipv6/netfilter/ip6t_MASQUERADE.ko
after:
 text    data   bss    dec  filename
 2521    1296     0   3817  net/netfilter/xt_MASQUERADE.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-11 20:59:29 +02:00
Florian Westphal bf8981a2aa netfilter: nf_nat: merge ip/ip6 masquerade headers
Both are now implemented by nf_nat_masquerade.c, so no need to keep
different headers.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-11 20:59:21 +02:00
David S. Miller 310655b07a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2019-04-08 23:39:36 -07:00
Lorenzo Bianconi 2a3cabae45 net: ip6_gre: fix possible use-after-free in ip6erspan_rcv
erspan_v6 tunnels run __iptunnel_pull_header on received skbs to remove
erspan header. This can determine a possible use-after-free accessing
pkt_md pointer in ip6erspan_rcv since the packet will be 'uncloned'
running pskb_expand_head if it is a cloned gso skb (e.g if the packet has
been sent though a veth device). Fix it resetting pkt_md pointer after
__iptunnel_pull_header

Fixes: 1d7e2ed22f ("net: erspan: refactor existing erspan code")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08 16:16:47 -07:00
David Ahern 0353f28231 neighbor: Add skip_cache argument to neigh_output
A later patch allows an IPv6 gateway with an IPv4 route. The neighbor
entry will exist in the v6 ndisc table and the cached header will contain
the ipv6 protocol which is wrong for an IPv4 packet. For an IPv4 packet to
use the v6 neighbor entry, neigh_output needs to skip the cached header
and just use the output callback for the neigh entry.

A future patchset can look at expanding the hh_cache to handle 2
protocols. For now, IPv6 gateways with an IPv4 route will take the
extra overhead of generating the header.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08 15:22:41 -07:00
David Ahern bdf0046771 net: Replace nhc_has_gw with nhc_gw_family
Allow the gateway in a fib_nh_common to be from a different address
family than the outer fib{6}_nh. To that end, replace nhc_has_gw with
nhc_gw_family and update users of nhc_has_gw to check nhc_gw_family.
Now nhc_family is used to know if the nh_common is part of a fib_nh
or fib6_nh (used for container_of to get to route family specific data),
and nhc_gw_family represents the address family for the gateway.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08 15:22:40 -07:00
David Ahern 1aefd3de7b ipv6: Add fib6_nh_init and release to stubs
Add fib6_nh_init and fib6_nh_release to ipv6_stubs. If fib6_nh_init fails,
callers should not invoke fib6_nh_release, so there is no reason to have
a dummy stub for the IPv6 is not enabled case.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08 15:22:40 -07:00
Florian Westphal c1deb065cf netfilter: nf_tables: merge route type into core
very little code, so it really doesn't make sense to have extra
modules or even a kconfig knob for this.

Merge them and make functionality available unconditionally.
The merge makes inet family route support trivial, so add it
as well here.

Before:
   text	   data	    bss	    dec	    hex	filename
    835	    832	      0	   1667	    683 nft_chain_route_ipv4.ko
    870	    832	      0	   1702	    6a6	nft_chain_route_ipv6.ko
 111568	   2556	    529	 114653	  1bfdd	nf_tables.ko

After:
   text	   data	    bss	    dec	    hex	filename
 113133	   2556	    529	 116218	  1c5fa	nf_tables.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-08 23:01:42 +02:00
Paolo Abeni fd69c399c7 datagram: remove rendundant 'peeked' argument
After commit a297569fe0 ("net/udp: do not touch skb->peeked unless
really needed") the 'peeked' argument of __skb_try_recv_datagram()
and friends is always equal to !!'flags & MSG_PEEK'.

Since such argument is really a boolean info, and the callers have
already 'flags & MSG_PEEK' handy, we can remove it and clean-up the
code a bit.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08 09:51:54 -07:00
Florian Westphal c9500d7b7d xfrm: store xfrm_mode directly, not its address
This structure is now only 4 bytes, so its more efficient
to cache a copy rather than its address.

No significant size difference in allmodconfig vmlinux.

With non-modular kernel that has all XFRM options enabled, this
series reduces vmlinux image size by ~11kb. All xfrm_mode
indirections are gone and all modes are built-in.

before (ipsec-next master):
    text      data      bss         dec   filename
21071494   7233140 11104324    39408958   vmlinux.master

after this series:
21066448   7226772 11104324    39397544   vmlinux.patched

With allmodconfig kernel, the size increase is only 362 bytes,
even all the xfrm config options removed in this series are
modular.

before:
    text      data     bss      dec   filename
15731286   6936912 4046908 26715106   vmlinux.master

after this series:
15731492   6937068  4046908  26715468 vmlinux

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08 09:15:28 +02:00
Florian Westphal 4c145dce26 xfrm: make xfrm modes builtin
after previous changes, xfrm_mode contains no function pointers anymore
and all modules defining such struct contain no code except an init/exit
functions to register the xfrm_mode struct with the xfrm core.

Just place the xfrm modes core and remove the modules,
the run-time xfrm_mode register/unregister functionality is removed.

Before:

    text    data     bss      dec filename
    7523     200    2364    10087 net/xfrm/xfrm_input.o
   40003     628     440    41071 net/xfrm/xfrm_state.o
15730338 6937080 4046908 26714326 vmlinux

    7389     200    2364    9953  net/xfrm/xfrm_input.o
   40574     656     440   41670  net/xfrm/xfrm_state.o
15730084 6937068 4046908 26714060 vmlinux

The xfrm*_mode_{transport,tunnel,beet} modules are gone.

v2: replace CONFIG_INET6_XFRM_MODE_* IS_ENABLED guards with CONFIG_IPV6
    ones rather than removing them.

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08 09:15:17 +02:00
Florian Westphal 733a5fac2f xfrm: remove afinfo pointer from xfrm_mode
Adds an EXPORT_SYMBOL for afinfo_get_rcu, as it will now be called from
ipv6 in case of CONFIG_IPV6=m.

This change has virtually no effect on vmlinux size, but it reduces
afinfo size and allows followup patch to make xfrm modes const.

v2: mark if (afinfo) tests as likely (Sabrina)
    re-fetch afinfo according to inner_mode in xfrm_prepare_input().

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08 09:15:09 +02:00
Florian Westphal 1de7083006 xfrm: remove output2 indirection from xfrm_mode
similar to previous patch: no external module dependencies,
so we can avoid the indirection by placing this in the core.

This change removes the last indirection from xfrm_mode and the
xfrm4|6_mode_{beet,tunnel}.c modules contain (almost) no code anymore.

Before:
   text    data     bss     dec     hex filename
   3957     136       0    4093     ffd net/xfrm/xfrm_output.o
    587      44       0     631     277 net/ipv4/xfrm4_mode_beet.o
    649      32       0     681     2a9 net/ipv4/xfrm4_mode_tunnel.o
    625      44       0     669     29d net/ipv6/xfrm6_mode_beet.o
    599      32       0     631     277 net/ipv6/xfrm6_mode_tunnel.o
After:
   text    data     bss     dec     hex filename
   5359     184       0    5543    15a7 net/xfrm/xfrm_output.o
    171      24       0     195      c3 net/ipv4/xfrm4_mode_beet.o
    171      24       0     195      c3 net/ipv4/xfrm4_mode_tunnel.o
    172      24       0     196      c4 net/ipv6/xfrm6_mode_beet.o
    172      24       0     196      c4 net/ipv6/xfrm6_mode_tunnel.o

v2: fold the *encap_add functions into xfrm*_prepare_output
    preserve (move) output2 comment (Sabrina)
    use x->outer_mode->encap, not inner
    fix a build breakage on ppc (kbuild robot)

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08 09:15:02 +02:00
Florian Westphal b3284df1c8 xfrm: remove input2 indirection from xfrm_mode
No external dependencies on any module, place this in the core.
Increase is about 1800 byte for xfrm_input.o.

The beet helpers get added to internal header, as they can be reused
from xfrm_output.c in the next patch (kernel contains several
copies of them in the xfrm{4,6}_mode_beet.c files).

Before:
   text    data     bss     dec filename
   5578     176    2364    8118 net/xfrm/xfrm_input.o
   1180      64       0    1244 net/ipv4/xfrm4_mode_beet.o
    171      40       0     211 net/ipv4/xfrm4_mode_transport.o
   1163      40       0    1203 net/ipv4/xfrm4_mode_tunnel.o
   1083      52       0    1135 net/ipv6/xfrm6_mode_beet.o
    172      40       0     212 net/ipv6/xfrm6_mode_ro.o
    172      40       0     212 net/ipv6/xfrm6_mode_transport.o
   1056      40       0    1096 net/ipv6/xfrm6_mode_tunnel.o

After:
   text    data     bss     dec filename
   7373     200    2364    9937 net/xfrm/xfrm_input.o
    587      44       0     631 net/ipv4/xfrm4_mode_beet.o
    171      32       0     203 net/ipv4/xfrm4_mode_transport.o
    649      32       0     681 net/ipv4/xfrm4_mode_tunnel.o
    625      44       0     669 net/ipv6/xfrm6_mode_beet.o
    172      32       0     204 net/ipv6/xfrm6_mode_ro.o
    172      32       0     204 net/ipv6/xfrm6_mode_transport.o
    599      32       0     631 net/ipv6/xfrm6_mode_tunnel.o

v2: pass inner_mode to xfrm_inner_mode_encap_remove to fix
    AF_UNSPEC selector breakage (bisected by Benedict Wong)

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08 09:14:55 +02:00
Florian Westphal 7613b92b1a xfrm: remove gso_segment indirection from xfrm_mode
These functions are small and we only have versions for tunnel
and transport mode for ipv4 and ipv6 respectively.

Just place the 'transport or tunnel' conditional in the protocol
specific function instead of using an indirection.

Before:
    3226       12       0     3238   net/ipv4/esp4_offload.o
    7004      492       0     7496   net/ipv4/ip_vti.o
    3339       12       0     3351   net/ipv6/esp6_offload.o
   11294      460       0    11754   net/ipv6/ip6_vti.o
    1180       72       0     1252   net/ipv4/xfrm4_mode_beet.o
     428       48       0      476   net/ipv4/xfrm4_mode_transport.o
    1271       48       0     1319   net/ipv4/xfrm4_mode_tunnel.o
    1083       60       0     1143   net/ipv6/xfrm6_mode_beet.o
     172       48       0      220   net/ipv6/xfrm6_mode_ro.o
     429       48       0      477   net/ipv6/xfrm6_mode_transport.o
    1164       48       0     1212   net/ipv6/xfrm6_mode_tunnel.o
15730428  6937008 4046908 26714344   vmlinux

After:
    3461       12       0     3473   net/ipv4/esp4_offload.o
    7000      492       0     7492   net/ipv4/ip_vti.o
    3574       12       0     3586   net/ipv6/esp6_offload.o
   11295      460       0    11755   net/ipv6/ip6_vti.o
    1180       64       0     1244   net/ipv4/xfrm4_mode_beet.o
     171       40       0      211   net/ipv4/xfrm4_mode_transport.o
    1163       40       0     1203   net/ipv4/xfrm4_mode_tunnel.o
    1083       52       0     1135   net/ipv6/xfrm6_mode_beet.o
     172       40       0      212   net/ipv6/xfrm6_mode_ro.o
     172       40       0      212   net/ipv6/xfrm6_mode_transport.o
    1056       40       0     1096   net/ipv6/xfrm6_mode_tunnel.o
15730424  6937008 4046908 26714340   vmlinux

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08 09:14:47 +02:00
Florian Westphal 303c5fab12 xfrm: remove xmit indirection from xfrm_mode
There are only two versions (tunnel and transport). The ip/ipv6 versions
are only differ in sizeof(iphdr) vs ipv6hdr.

Place this in the core and use x->outer_mode->encap type to call the
correct adjustment helper.

Before:
   text   data    bss     dec      filename
15730311  6937008 4046908 26714227 vmlinux

After:
15730428  6937008 4046908 26714344 vmlinux

(about 117 byte increase)

v2: use family from x->outer_mode, not inner

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08 09:14:34 +02:00
Florian Westphal 0c620e97b3 xfrm: remove output indirection from xfrm_mode
Same is input indirection.  Only exception: we need to export
xfrm_outer_mode_output for pktgen.

Increases size of vmlinux by about 163 byte:
Before:
   text    data     bss     dec      filename
15730208  6936948 4046908 26714064   vmlinux

After:
15730311  6937008 4046908 26714227   vmlinux

xfrm_inner_extract_output has no more external callers, make it static.

v2: add IS_ENABLED(IPV6) guard in xfrm6_prepare_output
    add two missing breaks in xfrm_outer_mode_output (Sabrina Dubroca)
    add WARN_ON_ONCE for 'call AF_INET6 related output function, but
    CONFIG_IPV6=n' case.
    make xfrm_inner_extract_output static

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08 09:14:28 +02:00
Florian Westphal c2d305e510 xfrm: remove input indirection from xfrm_mode
No need for any indirection or abstraction here, both functions
are pretty much the same and quite small, they also have no external
dependencies.

xfrm_prepare_input can then be made static.

With allmodconfig build, size increase of vmlinux is 25 byte:

Before:
   text   data     bss     dec      filename
15730207  6936924 4046908 26714039  vmlinux

After:
15730208  6936948 4046908 26714064 vmlinux

v2: Fix INET_XFRM_MODE_TRANSPORT name in is-enabled test (Sabrina Dubroca)
    change copied comment to refer to transport and network header,
    not skb->{h,nh}, which don't exist anymore. (Sabrina)
    make xfrm_prepare_input static (Eyal Birger)

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08 09:14:21 +02:00
Florian Westphal b45714b164 xfrm: prefer family stored in xfrm_mode struct
Now that we have the family available directly in the
xfrm_mode struct, we can use that and avoid one extra dereference.

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08 09:14:12 +02:00
Florian Westphal b262a69582 xfrm: place af number into xfrm_mode struct
This will be useful to know if we're supposed to decode ipv4 or ipv6.

While at it, make the unregister function return void, all module_exit
functions did just BUG(); there is never a point in doing error checks
if there is no way to handle such error.

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08 09:13:46 +02:00
NeilBrown 8f0db01800 rhashtable: use bit_spin_locks to protect hash bucket.
This patch changes rhashtables to use a bit_spin_lock on BIT(1) of the
bucket pointer to lock the hash chain for that bucket.

The benefits of a bit spin_lock are:
 - no need to allocate a separate array of locks.
 - no need to have a configuration option to guide the
   choice of the size of this array
 - locking cost is often a single test-and-set in a cache line
   that will have to be loaded anyway.  When inserting at, or removing
   from, the head of the chain, the unlock is free - writing the new
   address in the bucket head implicitly clears the lock bit.
   For __rhashtable_insert_fast() we ensure this always happens
   when adding a new key.
 - even when lockings costs 2 updates (lock and unlock), they are
   in a cacheline that needs to be read anyway.

The cost of using a bit spin_lock is a little bit of code complexity,
which I think is quite manageable.

Bit spin_locks are sometimes inappropriate because they are not fair -
if multiple CPUs repeatedly contend of the same lock, one CPU can
easily be starved.  This is not a credible situation with rhashtable.
Multiple CPUs may want to repeatedly add or remove objects, but they
will typically do so at different buckets, so they will attempt to
acquire different locks.

As we have more bit-locks than we previously had spinlocks (by at
least a factor of two) we can expect slightly less contention to
go with the slightly better cache behavior and reduced memory
consumption.

To enhance type checking, a new struct is introduced to represent the
  pointer plus lock-bit
that is stored in the bucket-table.  This is "struct rhash_lock_head"
and is empty.  A pointer to this needs to be cast to either an
unsigned lock, or a "struct rhash_head *" to be useful.
Variables of this type are most often called "bkt".

Previously "pprev" would sometimes point to a bucket, and sometimes a
->next pointer in an rhash_head.  As these are now different types,
pprev is NULL when it would have pointed to the bucket. In that case,
'blk' is used, together with correct locking protocol.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-07 19:12:12 -07:00
David S. Miller f83f715195 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Minor comment merge conflict in mlx5.

Staging driver has a fixup due to the skb->xmit_more changes
in 'net-next', but was removed in 'net'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-05 14:14:19 -07:00
Lorenzo Bianconi bb9bd814eb ipv6: sit: reset ip header pointer in ipip6_rcv
ipip6 tunnels run iptunnel_pull_header on received skbs. This can
determine the following use-after-free accessing iph pointer since
the packet will be 'uncloned' running pskb_expand_head if it is a
cloned gso skb (e.g if the packet has been sent though a veth device)

[  706.369655] BUG: KASAN: use-after-free in ipip6_rcv+0x1678/0x16e0 [sit]
[  706.449056] Read of size 1 at addr ffffe01b6bd855f5 by task ksoftirqd/1/=
[  706.669494] Hardware name: HPE ProLiant m400 Server/ProLiant m400 Server, BIOS U02 08/19/2016
[  706.771839] Call trace:
[  706.801159]  dump_backtrace+0x0/0x2f8
[  706.845079]  show_stack+0x24/0x30
[  706.884833]  dump_stack+0xe0/0x11c
[  706.925629]  print_address_description+0x68/0x260
[  706.982070]  kasan_report+0x178/0x340
[  707.025995]  __asan_report_load1_noabort+0x30/0x40
[  707.083481]  ipip6_rcv+0x1678/0x16e0 [sit]
[  707.132623]  tunnel64_rcv+0xd4/0x200 [tunnel4]
[  707.185940]  ip_local_deliver_finish+0x3b8/0x988
[  707.241338]  ip_local_deliver+0x144/0x470
[  707.289436]  ip_rcv_finish+0x43c/0x14b0
[  707.335447]  ip_rcv+0x628/0x1138
[  707.374151]  __netif_receive_skb_core+0x1670/0x2600
[  707.432680]  __netif_receive_skb+0x28/0x190
[  707.482859]  process_backlog+0x1d0/0x610
[  707.529913]  net_rx_action+0x37c/0xf68
[  707.574882]  __do_softirq+0x288/0x1018
[  707.619852]  run_ksoftirqd+0x70/0xa8
[  707.662734]  smpboot_thread_fn+0x3a4/0x9e8
[  707.711875]  kthread+0x2c8/0x350
[  707.750583]  ret_from_fork+0x10/0x18

[  707.811302] Allocated by task 16982:
[  707.854182]  kasan_kmalloc.part.1+0x40/0x108
[  707.905405]  kasan_kmalloc+0xb4/0xc8
[  707.948291]  kasan_slab_alloc+0x14/0x20
[  707.994309]  __kmalloc_node_track_caller+0x158/0x5e0
[  708.053902]  __kmalloc_reserve.isra.8+0x54/0xe0
[  708.108280]  __alloc_skb+0xd8/0x400
[  708.150139]  sk_stream_alloc_skb+0xa4/0x638
[  708.200346]  tcp_sendmsg_locked+0x818/0x2b90
[  708.251581]  tcp_sendmsg+0x40/0x60
[  708.292376]  inet_sendmsg+0xf0/0x520
[  708.335259]  sock_sendmsg+0xac/0xf8
[  708.377096]  sock_write_iter+0x1c0/0x2c0
[  708.424154]  new_sync_write+0x358/0x4a8
[  708.470162]  __vfs_write+0xc4/0xf8
[  708.510950]  vfs_write+0x12c/0x3d0
[  708.551739]  ksys_write+0xcc/0x178
[  708.592533]  __arm64_sys_write+0x70/0xa0
[  708.639593]  el0_svc_handler+0x13c/0x298
[  708.686646]  el0_svc+0x8/0xc

[  708.739019] Freed by task 17:
[  708.774597]  __kasan_slab_free+0x114/0x228
[  708.823736]  kasan_slab_free+0x10/0x18
[  708.868703]  kfree+0x100/0x3d8
[  708.905320]  skb_free_head+0x7c/0x98
[  708.948204]  skb_release_data+0x320/0x490
[  708.996301]  pskb_expand_head+0x60c/0x970
[  709.044399]  __iptunnel_pull_header+0x3b8/0x5d0
[  709.098770]  ipip6_rcv+0x41c/0x16e0 [sit]
[  709.146873]  tunnel64_rcv+0xd4/0x200 [tunnel4]
[  709.200195]  ip_local_deliver_finish+0x3b8/0x988
[  709.255596]  ip_local_deliver+0x144/0x470
[  709.303692]  ip_rcv_finish+0x43c/0x14b0
[  709.349705]  ip_rcv+0x628/0x1138
[  709.388413]  __netif_receive_skb_core+0x1670/0x2600
[  709.446943]  __netif_receive_skb+0x28/0x190
[  709.497120]  process_backlog+0x1d0/0x610
[  709.544169]  net_rx_action+0x37c/0xf68
[  709.589131]  __do_softirq+0x288/0x1018

[  709.651938] The buggy address belongs to the object at ffffe01b6bd85580
                which belongs to the cache kmalloc-1024 of size 1024
[  709.804356] The buggy address is located 117 bytes inside of
                1024-byte region [ffffe01b6bd85580, ffffe01b6bd85980)
[  709.946340] The buggy address belongs to the page:
[  710.003824] page:ffff7ff806daf600 count:1 mapcount:0 mapping:ffffe01c4001f600 index:0x0
[  710.099914] flags: 0xfffff8000000100(slab)
[  710.149059] raw: 0fffff8000000100 dead000000000100 dead000000000200 ffffe01c4001f600
[  710.242011] raw: 0000000000000000 0000000000380038 00000001ffffffff 0000000000000000
[  710.334966] page dumped because: kasan: bad access detected

Fix it resetting iph pointer after iptunnel_pull_header

Fixes: a09a4c8dd1 ("tunnels: Remove encapsulation offloads on decap")
Tested-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04 18:34:23 -07:00
David Ahern c0a720770c ipv6: Flip to fib_nexthop_info
Export fib_nexthop_info and fib_add_nexthop for use by IPv6 code.
Remove rt6_nexthop_info and rt6_add_nexthop in favor of the IPv4
versions. Update fib_nexthop_info for IPv6 linkdown check and
RTA_GATEWAY for AF_INET6.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-03 21:50:20 -07:00
Junwei Hu ef0efcd3bd ipv6: Fix dangling pointer when ipv6 fragment
At the beginning of ip6_fragment func, the prevhdr pointer is
obtained in the ip6_find_1stfragopt func.
However, all the pointers pointing into skb header may change
when calling skb_checksum_help func with
skb->ip_summed = CHECKSUM_PARTIAL condition.
The prevhdr pointe will be dangling if it is not reloaded after
calling __skb_linearize func in skb_checksum_help func.

Here, I add a variable, nexthdr_offset, to evaluate the offset,
which does not changes even after calling __skb_linearize func.

Fixes: 405c92f7a5 ("ipv6: add defensive check for CHECKSUM_PARTIAL skbs in ip_fragment")
Signed-off-by: Junwei Hu <hujunwei4@huawei.com>
Reported-by: Wenhao Zhang <zhangwenhao8@huawei.com>
Reported-by: syzbot+e8ce541d095e486074fc@syzkaller.appspotmail.com
Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-03 21:42:20 -07:00
Sheena Mira-ato b2e54b09a3 ip6_tunnel: Match to ARPHRD_TUNNEL6 for dev type
The device type for ip6 tunnels is set to
ARPHRD_TUNNEL6. However, the ip4ip6_err function
is expecting the device type of the tunnel to be
ARPHRD_TUNNEL.  Since the device types do not
match, the function exits and the ICMP error
packet is not sent to the originating host. Note
that the device type for IPv4 tunnels is set to
ARPHRD_TUNNEL.

Fix is to expect a tunnel device type of
ARPHRD_TUNNEL6 instead.  Now the tunnel device
type matches and the ICMP error packet is sent
to the originating host.

Signed-off-by: Sheena Mira-ato <sheena.mira-ato@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-02 13:19:34 -07:00
Eric Dumazet f5d547676c tcp: fix tcp_inet6_sk() for 32bit kernels
It turns out that struct ipv6_pinfo is not located as we think.

inet6_sk_generic() and tcp_inet6_sk() disagree on 32bit kernels by 4-bytes,
because struct tcp_sock has 8-bytes alignment,
but ipv6_pinfo size is not a multiple of 8.

sizeof(struct ipv6_pinfo): 116 (not padded to 8)

I actually first coded tcp_inet6_sk() as this patch does, but thought
that "container_of(tcp_sk(sk), struct tcp6_sock, tcp)" was cleaner.

As Julian told me : Nobody should use tcp6_sock.inet6
directly, it should be accessed via tcp_inet6_sk() or inet6_sk().

This happened when we added the first u64 field in struct tcp_sock.

Fixes: 93a77c11ae ("tcp: add tcp_inet6_sk() helper")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Bisected-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01 10:21:21 -07:00
David Ahern 3616d08bcb ipv6: Move ipv6 stubs to a separate header file
The number of stubs is growing and has nothing to do with addrconf.
Move the definition of the stubs to a separate header file and update
users. In the move, drop the vxlan specific comment before ipv6_stub.

Code move only; no functional change intended.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29 10:53:45 -07:00
David Ahern 979e276ebe net: Use common nexthop init and release helpers
With fib_nh_common in place, move common initialization and release
code into helpers used by both ipv4 and ipv6. For the moment, the init
is just the lwt encap and the release is both the netdev reference and
the the lwt state reference. More will be added later.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29 10:48:04 -07:00
David Ahern f1741730dd net: Add fib_nh_common and update fib_nh and fib6_nh
Add fib_nh_common struct with common nexthop attributes. Convert
fib_nh and fib6_nh to use it. Use macros to move existing
fib_nh_* references to the new nh_common.nhc_*.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29 10:48:04 -07:00
David Ahern ad1601ae02 ipv6: Rename fib6_nh entries
Rename fib6_nh entries that will be moved to a fib_nh_common struct.
Specifically, the device, gateway, flags, and lwtstate are common
with all nexthop definitions. In some places new temporary variables
are declared or local variables renamed to maintain line lengths.

Rename only; no functional change intended.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29 10:48:04 -07:00
David Ahern 572bf4dd71 ipv6: Change rt6_add_nexthop and rt6_nexthop_info to take fib6_nh
rt6_add_nexthop and rt6_nexthop_info only need the fib6_info for the
gateway flag and the nexthop weight, and the presence of a gateway is now
per-nexthop. Update the signatures to take a fib6_nh and nexthop weight
and better align with the ipv4 versions.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29 10:48:04 -07:00
David Ahern 6d3d07b45c ipv6: Refactor fib6_ignore_linkdown
fib6_ignore_linkdown takes a fib6_info but only looks at the net_device
and its IPv6 config. Change it to take a net_device over a fib6_info as
its input argument.

In addition, move it to a header file to make the check inline and usable
later with IPv4 code without going through the ipv6 stub, and rename to
ip6_ignore_linkdown since it is only checking the setting based on the
ipv6 struct on a device.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29 10:48:04 -07:00
David Ahern 2b2450ca4a ipv6: Move gateway checks to a fib6_nh setting
The gateway setting is not per fib6_info entry but per-fib6_nh. Add a new
fib_nh_has_gw flag to fib6_nh and convert references to RTF_GATEWAY to
the new flag. For IPv6 address the flag is cheaper than checking that
nh_gw is non-0 like IPv4 does.

While this increases fib6_nh by 8-bytes, the effective allocation size of
a fib6_info is unchanged. The 8 bytes is recovered later with a
fib_nh_common change.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29 10:48:03 -07:00
David Ahern dac7d0f270 ipv6: Create cleanup helper for fib6_nh
Move the fib6_nh cleanup code to a new helper, fib6_nh_release.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29 10:48:03 -07:00
David Ahern 83c4425159 ipv6: Create init helper for fib6_nh
Similar to IPv4, consolidate the fib6_nh initialization into a helper.
As a new standalone function, add a cleanup path to put lwtstate on
error.

To avoid modifying fib6_config flags, move the reject check to a helper
that is invoked once by fib6_nh_init to reset the device and then
again in ip6_route_info_create to set the fib6_flags.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29 10:48:03 -07:00
Herbert Xu b5f9bd15b8 ila: Fix rhashtable walker list corruption
ila_xlat_nl_cmd_flush uses rhashtable walkers allocated from the
stack but it never frees them.  This corrupts the walker list of
the hash table.

This patch fixes it.

Reported-by: syzbot+dae72a112334aa65a159@syzkaller.appspotmail.com
Fixes: b6e71bdebb ("ila: Flush netlink command to clear xlat...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27 22:46:16 -07:00
David S. Miller 356d71e00d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2019-03-27 17:37:58 -07:00
Eric Dumazet df453700e8 inet: switch IP ID generator to siphash
According to Amit Klein and Benny Pinkas, IP ID generation is too weak
and might be used by attackers.

Even with recent net_hash_mix() fix (netns: provide pure entropy for net_hash_mix())
having 64bit key and Jenkins hash is risky.

It is time to switch to siphash and its 128bit keys.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Amit Klein <aksecurity@gmail.com>
Reported-by: Benny Pinkas <benny@pinkas.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27 14:29:26 -07:00
Cong Wang dbb2483b2a xfrm: clean up xfrm protocol checks
In commit 6a53b75932 ("xfrm: check id proto in validate_tmpl()")
I introduced a check for xfrm protocol, but according to Herbert
IPSEC_PROTO_ANY should only be used as a wildcard for lookup, so
it should be removed from validate_tmpl().

And, IPSEC_PROTO_ANY is expected to only match 3 IPSec-specific
protocols, this is why xfrm_state_flush() could still miss
IPPROTO_ROUTING, which leads that those entries are left in
net->xfrm.state_all before exit net. Fix this by replacing
IPSEC_PROTO_ANY with zero.

This patch also extracts the check from validate_tmpl() to
xfrm_id_proto_valid() and uses it in parse_ipsecrequest().
With this, no other protocols should be added into xfrm.

Fixes: 6a53b75932 ("xfrm: check id proto in validate_tmpl()")
Reported-by: syzbot+0bf0519d6e0de15914fe@syzkaller.appspotmail.com
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-03-26 08:35:36 +01:00
Eric Dumazet 8b27dae5a2 tcp: add one skb cache for rx
Often times, recvmsg() system calls and BH handling for a particular
TCP socket are done on different cpus.

This means the incoming skb had to be allocated on a cpu,
but freed on another.

This incurs a high spinlock contention in slab layer for small rpc,
but also a high number of cache line ping pongs for larger packets.

A full size GRO packet might use 45 page fragments, meaning
that up to 45 put_page() can be involved.

More over performing the __kfree_skb() in the recvmsg() context
adds a latency for user applications, and increase probability
of trapping them in backlog processing, since the BH handler
might found the socket owned by the user.

This patch, combined with the prior one increases the rpc
performance by about 10 % on servers with large number of cores.

(tcp_rr workload with 10,000 flows and 112 threads reach 9 Mpps
 instead of 8 Mpps)

This also increases single bulk flow performance on 40Gbit+ links,
since in this case there are often two cpus working in tandem :

 - CPU handling the NIC rx interrupts, feeding the receive queue,
  and (after this patch) freeing the skbs that were consumed.

 - CPU in recvmsg() system call, essentially 100 % busy copying out
  data to user space.

Having at most one skb in a per-socket cache has very little risk
of memory exhaustion, and since it is protected by socket lock,
its management is essentially free.

Note that if rps/rfs is used, we do not enable this feature, because
there is high chance that the same cpu is handling both the recvmsg()
system call and the TCP rx path, but that another cpu did the skb
allocations in the device driver right before the RPS/RFS logic.

To properly handle this case, it seems we would need to record
on which cpu skb was allocated, and use a different channel
to give skbs back to this cpu.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23 21:57:38 -04:00
Johannes Berg 3b0f31f2b8 genetlink: make policy common to family
Since maxattr is common, the policy can't really differ sanely,
so make it common as well.

The only user that did in fact manage to make a non-common policy
is taskstats, which has to be really careful about it (since it's
still using a common maxattr!). This is no longer supported, but
we can fake it using pre_doit.

This reduces the size of e.g. nl80211.o (which has lots of commands):

   text	   data	    bss	    dec	    hex	filename
 398745	  14323	   2240	 415308	  6564c	net/wireless/nl80211.o (before)
 397913	  14331	   2240	 414484	  65314	net/wireless/nl80211.o (after)
--------------------------------
   -832      +8       0    -824

Which is obviously just 8 bytes for each command, and an added 8
bytes for the new policy pointer. I'm not sure why the ops list is
counted as .text though.

Most of the code transformations were done using the following spatch:
    @ops@
    identifier OPS;
    expression POLICY;
    @@
    struct genl_ops OPS[] = {
    ...,
     {
    -	.policy = POLICY,
     },
    ...
    };

    @@
    identifier ops.OPS;
    expression ops.POLICY;
    identifier fam;
    expression M;
    @@
    struct genl_family fam = {
            .ops = OPS,
            .maxattr = M,
    +       .policy = POLICY,
            ...
    };

This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing
the cb->data as ops, which we want to change in a later genl patch.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22 10:38:23 -04:00
David Ahern 10585b4342 ipv6: Remove fallback argument from ip6_hold_safe
net and null_fallback are redundant. Remove null_fallback in favor of
!net check.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:30:34 -07:00
David Ahern c7a1ce397a ipv6: Change addrconf_f6i_alloc to use ip6_route_info_create
Change addrconf_f6i_alloc to generate a fib6_config and call
ip6_route_info_create. addrconf_f6i_alloc is the last caller to
fib6_info_alloc besides ip6_route_info_create, and there is no
reason for it to do its own initialization on a fib6_info.

Host routes need to be created even if the device is down, so add a
new flag, fc_ignore_dev_down, to fib6_config and update fib6_nh_init
to not error out if device is not up.

Notes on the conversion:
- ip_fib_metrics_init is the same as fib6_config has fc_mx set to NULL
  and fc_mx_len set to 0
- dst_nocount is handled by the RTF_ADDRCONF flag
- dst_host is handled by fc_dst_len = 128

nh_gw does not get set after the conversion to ip6_route_info_create
but it should not be set in addrconf_f6i_alloc since this is a host
route not a gateway route.

Everything else is a straight forward map between fib6_info and
fib6_config.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 10:16:54 -07:00
David Ahern 67f6951347 ipv6: Move setting default metric for routes
ip6_route_info_create is a low level function for ensuring fc_metric is
set. Move the check and default setting to the 2 locations that do not
already set fc_metric before calling ip6_route_info_create. This is
required for the next patch which moves addrconf allocations to
ip6_route_info_create and want the metric for host routes to be 0.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 10:16:54 -07:00
David S. Miller e0831ef716 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree:

1) Remove a direct dependency with IPv6 introduced by the
   sip_external_media feature, from Alin Nastac.

2) Fix bogus ENOENT when removing interval elements from set.

3) Set transport_header from br_netfilter to mimic the stack
   behaviour, this partially fixes a checksum validation bug
   from the SCTP connection tracking, from Xin Long.

4) Fix undefined reference to symbol in xt_TEE, due to missing
   Kconfig dependencies, from Arnd Bergmann.

5) Check for NULL in skb_header_pointer() calls in ip6t_shr,
   from Kangjie Lu.

6) Fix bogus EBUSY when removing an existing conntrack helper from
   a transaction.

7) Fix module autoload of the redirect extension.

8) Remove duplicated transition in flowtable diagram in the existing
   documentation.

9) Missing .release_ops call from error path in newrule() which
   results module refcount leak, from Taehee Yoo.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 10:07:00 -07:00
Stephen Suryaputra 0b03a5ca8b ipv6: Add icmp_echo_ignore_anycast for ICMPv6
In addition to icmp_echo_ignore_multicast, there is a need to also
prevent responding to pings to anycast addresses for security.

Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-20 16:29:37 -07:00
Xin Long 1c87e79a00 ipv6: make ip6_create_rt_rcu return ip6_null_entry instead of NULL
Jianlin reported a crash:

  [  381.484332] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
  [  381.619802] RIP: 0010:fib6_rule_lookup+0xa3/0x160
  [  382.009615] Call Trace:
  [  382.020762]  <IRQ>
  [  382.030174]  ip6_route_redirect.isra.52+0xc9/0xf0
  [  382.050984]  ip6_redirect+0xb6/0xf0
  [  382.066731]  icmpv6_notify+0xca/0x190
  [  382.083185]  ndisc_redirect_rcv+0x10f/0x160
  [  382.102569]  ndisc_rcv+0xfb/0x100
  [  382.117725]  icmpv6_rcv+0x3f2/0x520
  [  382.133637]  ip6_input_finish+0xbf/0x460
  [  382.151634]  ip6_input+0x3b/0xb0
  [  382.166097]  ipv6_rcv+0x378/0x4e0

It was caused by the lookup function __ip6_route_redirect() returns NULL in
fib6_rule_lookup() when ip6_create_rt_rcu() returns NULL.

So we fix it by simply making ip6_create_rt_rcu() return ip6_null_entry
instead of NULL.

v1->v2:
  - move down 'fallback:' to make it more readable.

Fixes: e873e4b9cc ("ipv6: use fib6_info_hold_safe() when necessary")
Reported-by: Jianlin Shi <jishi@redhat.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-20 11:06:56 -07:00
Stephen Suryaputra 03f1eccc7a ipv6: Add icmp_echo_ignore_multicast support for ICMPv6
IPv4 has icmp_echo_ignore_broadcast to prevent responding to broadcast pings.
IPv6 needs a similar mechanism.

v1->v2:
- Remove NET_IPV6_ICMP_ECHO_IGNORE_MULTICAST.

Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19 14:29:51 -07:00
Eric Dumazet 93a77c11ae tcp: add tcp_inet6_sk() helper
TCP ipv6 fast path dereferences a pointer to get to the inet6
part of a tcp socket, but given the fixed memory placement,
we can do better and avoid a possible cache line miss.

This also reduces register pressure, since we let the compiler
know about this memory placement.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19 14:09:32 -07:00
Eric Dumazet 89e4130939 tcp: do not use ipv6 header for ipv4 flow
When a dual stack tcp listener accepts an ipv4 flow,
it should not attempt to use an ipv6 header or tcp_v6_iif() helper.

Fixes: 1397ed35f2 ("ipv6: add flowinfo for tcp6 pkt_options for all cases")
Fixes: df3687ffc6 ("ipv6: add the IPV6_FL_F_REFLECT flag to IPV6_FL_A_GET")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19 14:00:27 -07:00
Kangjie Lu 6d65561f3d netfilter: ip6t_srh: fix NULL pointer dereferences
skb_header_pointer may return NULL. The current code dereference
its return values without a NULL check.

The fix inserts the checks to avoid NULL pointer dereferences.

Fixes: 202a8ff545 ("netfilter: add IPv6 segment routing header 'srh' match")
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-03-18 16:22:48 +01:00
Su Yanjun 6ee02a54ef xfrm6_tunnel: Fix potential panic when unloading xfrm6_tunnel module
When unloading xfrm6_tunnel module, xfrm6_tunnel_fini directly
frees the xfrm6_tunnel_spi_kmem. Maybe someone has gotten the
xfrm6_tunnel_spi, so need to wait it.

Fixes: 91cc3bb0b04ff("xfrm6_tunnel: RCU conversion")
Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-03-15 11:11:42 +01:00
Miaohe Lin a843dc4eba net: sit: fix UBSAN Undefined behaviour in check_6rd
In func check_6rd,tunnel->ip6rd.relay_prefixlen may equal to
32,so UBSAN complain about it.

UBSAN: Undefined behaviour in net/ipv6/sit.c:781:47
shift exponent 32 is too large for 32-bit type 'unsigned int'
CPU: 6 PID: 20036 Comm: syz-executor.0 Not tainted 4.19.27 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1
04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xca/0x13e lib/dump_stack.c:113
ubsan_epilogue+0xe/0x81 lib/ubsan.c:159
__ubsan_handle_shift_out_of_bounds+0x293/0x2e8 lib/ubsan.c:425
check_6rd.constprop.9+0x433/0x4e0 net/ipv6/sit.c:781
try_6rd net/ipv6/sit.c:806 [inline]
ipip6_tunnel_xmit net/ipv6/sit.c:866 [inline]
sit_tunnel_xmit+0x141c/0x2720 net/ipv6/sit.c:1033
__netdev_start_xmit include/linux/netdevice.h:4300 [inline]
netdev_start_xmit include/linux/netdevice.h:4309 [inline]
xmit_one net/core/dev.c:3243 [inline]
dev_hard_start_xmit+0x17c/0x780 net/core/dev.c:3259
__dev_queue_xmit+0x1656/0x2500 net/core/dev.c:3829
neigh_output include/net/neighbour.h:501 [inline]
ip6_finish_output2+0xa36/0x2290 net/ipv6/ip6_output.c:120
ip6_finish_output+0x3e7/0xa20 net/ipv6/ip6_output.c:154
NF_HOOK_COND include/linux/netfilter.h:278 [inline]
ip6_output+0x1e2/0x720 net/ipv6/ip6_output.c:171
dst_output include/net/dst.h:444 [inline]
ip6_local_out+0x99/0x170 net/ipv6/output_core.c:176
ip6_send_skb+0x9d/0x2f0 net/ipv6/ip6_output.c:1697
ip6_push_pending_frames+0xc0/0x100 net/ipv6/ip6_output.c:1717
rawv6_push_pending_frames net/ipv6/raw.c:616 [inline]
rawv6_sendmsg+0x2435/0x3530 net/ipv6/raw.c:946
inet_sendmsg+0xf8/0x5c0 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg+0xc8/0x110 net/socket.c:631
___sys_sendmsg+0x6cf/0x890 net/socket.c:2114
__sys_sendmsg+0xf0/0x1b0 net/socket.c:2152
do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Signed-off-by: linmiaohe <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-11 10:32:45 -07:00
Eric Dumazet 5355ed6388 fou, fou6: avoid uninit-value in gue_err() and gue6_err()
My prior commit missed the fact that these functions
were using udp_hdr() (aka skb_transport_header())
to get access to GUE header.

Since pskb_transport_may_pull() does not exist yet, we have to add
transport_offset to our pskb_may_pull() calls.

BUG: KMSAN: uninit-value in gue_err+0x514/0xfa0 net/ipv4/fou.c:1032
CPU: 1 PID: 10648 Comm: syz-executor.1 Not tainted 5.0.0+ #11
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x173/0x1d0 lib/dump_stack.c:113
 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:600
 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313
 gue_err+0x514/0xfa0 net/ipv4/fou.c:1032
 __udp4_lib_err_encap_no_sk net/ipv4/udp.c:571 [inline]
 __udp4_lib_err_encap net/ipv4/udp.c:626 [inline]
 __udp4_lib_err+0x12e6/0x1d40 net/ipv4/udp.c:665
 udp_err+0x74/0x90 net/ipv4/udp.c:737
 icmp_socket_deliver net/ipv4/icmp.c:767 [inline]
 icmp_unreach+0xb65/0x1070 net/ipv4/icmp.c:884
 icmp_rcv+0x11a1/0x1950 net/ipv4/icmp.c:1066
 ip_protocol_deliver_rcu+0x584/0xbb0 net/ipv4/ip_input.c:208
 ip_local_deliver_finish net/ipv4/ip_input.c:234 [inline]
 NF_HOOK include/linux/netfilter.h:289 [inline]
 ip_local_deliver+0x624/0x7b0 net/ipv4/ip_input.c:255
 dst_input include/net/dst.h:450 [inline]
 ip_rcv_finish net/ipv4/ip_input.c:414 [inline]
 NF_HOOK include/linux/netfilter.h:289 [inline]
 ip_rcv+0x6bd/0x740 net/ipv4/ip_input.c:524
 __netif_receive_skb_one_core net/core/dev.c:4973 [inline]
 __netif_receive_skb net/core/dev.c:5083 [inline]
 process_backlog+0x756/0x10e0 net/core/dev.c:5923
 napi_poll net/core/dev.c:6346 [inline]
 net_rx_action+0x78b/0x1a60 net/core/dev.c:6412
 __do_softirq+0x53f/0x93a kernel/softirq.c:293
 invoke_softirq kernel/softirq.c:375 [inline]
 irq_exit+0x214/0x250 kernel/softirq.c:416
 exiting_irq+0xe/0x10 arch/x86/include/asm/apic.h:536
 smp_apic_timer_interrupt+0x48/0x70 arch/x86/kernel/apic/apic.c:1064
 apic_timer_interrupt+0x2e/0x40 arch/x86/entry/entry_64.S:814
 </IRQ>
RIP: 0010:finish_lock_switch+0x2b/0x40 kernel/sched/core.c:2597
Code: 48 89 e5 53 48 89 fb e8 63 e7 95 00 8b b8 88 0c 00 00 48 8b 00 48 85 c0 75 12 48 89 df e8 dd db 95 00 c6 00 00 c6 03 00 fb 5b <5d> c3 e8 4e e6 95 00 eb e7 66 90 66 2e 0f 1f 84 00 00 00 00 00 55
RSP: 0018:ffff888081a0fc80 EFLAGS: 00000296 ORIG_RAX: ffffffffffffff13
RAX: ffff88821fd6bd80 RBX: ffff888027898000 RCX: ccccccccccccd000
RDX: ffff88821fca8d80 RSI: ffff888000000000 RDI: 00000000000004a0
RBP: ffff888081a0fc80 R08: 0000000000000002 R09: ffff888081a0fb08
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
R13: ffff88811130e388 R14: ffff88811130da00 R15: ffff88812fdb7d80
 finish_task_switch+0xfc/0x2d0 kernel/sched/core.c:2698
 context_switch kernel/sched/core.c:2851 [inline]
 __schedule+0x6cc/0x800 kernel/sched/core.c:3491
 schedule+0x15b/0x240 kernel/sched/core.c:3535
 freezable_schedule include/linux/freezer.h:172 [inline]
 do_nanosleep+0x2ba/0x980 kernel/time/hrtimer.c:1679
 hrtimer_nanosleep kernel/time/hrtimer.c:1733 [inline]
 __do_sys_nanosleep kernel/time/hrtimer.c:1767 [inline]
 __se_sys_nanosleep+0x746/0x960 kernel/time/hrtimer.c:1754
 __x64_sys_nanosleep+0x3e/0x60 kernel/time/hrtimer.c:1754
 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x4855a0
Code: 00 00 48 c7 c0 d4 ff ff ff 64 c7 00 16 00 00 00 31 c0 eb be 66 0f 1f 44 00 00 83 3d b1 11 5d 00 00 75 14 b8 23 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 04 e2 f8 ff c3 48 83 ec 08 e8 3a 55 fd ff
RSP: 002b:0000000000a4fd58 EFLAGS: 00000246 ORIG_RAX: 0000000000000023
RAX: ffffffffffffffda RBX: 0000000000085780 RCX: 00000000004855a0
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000a4fd60
RBP: 00000000000007ec R08: 0000000000000001 R09: 0000000000ceb940
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000008
R13: 0000000000a4fdb0 R14: 0000000000085711 R15: 0000000000a4fdc0

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:205 [inline]
 kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:159
 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176
 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185
 slab_post_alloc_hook mm/slab.h:445 [inline]
 slab_alloc_node mm/slub.c:2773 [inline]
 __kmalloc_node_track_caller+0xe9e/0xff0 mm/slub.c:4398
 __kmalloc_reserve net/core/skbuff.c:140 [inline]
 __alloc_skb+0x309/0xa20 net/core/skbuff.c:208
 alloc_skb include/linux/skbuff.h:1012 [inline]
 alloc_skb_with_frags+0x186/0xa60 net/core/skbuff.c:5287
 sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2091
 sock_alloc_send_skb+0xca/0xe0 net/core/sock.c:2108
 __ip_append_data+0x34cd/0x5000 net/ipv4/ip_output.c:998
 ip_append_data+0x324/0x480 net/ipv4/ip_output.c:1220
 icmp_push_reply+0x23d/0x7e0 net/ipv4/icmp.c:375
 __icmp_send+0x2ea3/0x30f0 net/ipv4/icmp.c:737
 icmp_send include/net/icmp.h:47 [inline]
 ipv4_link_failure+0x6d/0x230 net/ipv4/route.c:1190
 dst_link_failure include/net/dst.h:427 [inline]
 arp_error_report+0x106/0x1a0 net/ipv4/arp.c:297
 neigh_invalidate+0x359/0x8e0 net/core/neighbour.c:992
 neigh_timer_handler+0xdf2/0x1280 net/core/neighbour.c:1078
 call_timer_fn+0x285/0x600 kernel/time/timer.c:1325
 expire_timers kernel/time/timer.c:1362 [inline]
 __run_timers+0xdb4/0x11d0 kernel/time/timer.c:1681
 run_timer_softirq+0x2e/0x50 kernel/time/timer.c:1694
 __do_softirq+0x53f/0x93a kernel/softirq.c:293

Fixes: 26fc181e6c ("fou, fou6: do not assume linear skbs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Stefano Brivio <sbrivio@redhat.com>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-08 15:19:53 -08:00
Myungho Jung 6ed69184ed xfrm: Reset secpath in xfrm failure
In esp4_gro_receive() and esp6_gro_receive(), secpath can be allocated
without adding xfrm state to xvec. Then, sp->xvec[sp->len - 1] would
fail and result in dereferencing invalid pointer in esp4_gso_segment()
and esp6_gso_segment(). Reset secpath if xfrm function returns error.

Fixes: 7785bba299 ("esp: Add a software GRO codepath")
Reported-by: syzbot+b69368fd933c6c592f4c@syzkaller.appspotmail.com
Signed-off-by: Myungho Jung <mhjungk@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-03-08 07:32:16 +01:00
Arnd Bergmann a154d5d83d net: ignore sysctl_devconf_inherit_init_net without SYSCTL
When CONFIG_SYSCTL is turned off, we get a link failure for
the newly introduced tuning knob.

net/ipv6/addrconf.o: In function `addrconf_init_net':
addrconf.c:(.text+0x31dc): undefined reference to `sysctl_devconf_inherit_init_net'

Add an IS_ENABLED() check to fall back to the default behavior
(sysctl_devconf_inherit_init_net=0) here.

Fixes: 856c395cfa ("net: introduce a knob to control whether to inherit devconf config")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04 13:14:34 -08:00
Ido Schimmel 87c11f1ddb ip6mr: Do not call __IP6_INC_STATS() from preemptible context
Similar to commit 44f49dd8b5 ("ipmr: fix possible race resulting from
improper usage of IP_INC_STATS_BH() in preemptible context."), we cannot
assume preemption is disabled when incrementing the counter and
accessing a per-CPU variable.

Preemption can be enabled when we add a route in process context that
corresponds to packets stored in the unresolved queue, which are then
forwarded using this route [1].

Fix this by using IP6_INC_STATS() which takes care of disabling
preemption on architectures where it is needed.

[1]
[  157.451447] BUG: using __this_cpu_add() in preemptible [00000000] code: smcrouted/2314
[  157.460409] caller is ip6mr_forward2+0x73e/0x10e0
[  157.460434] CPU: 3 PID: 2314 Comm: smcrouted Not tainted 5.0.0-rc7-custom-03635-g22f2712113f1 #1336
[  157.460449] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016
[  157.460461] Call Trace:
[  157.460486]  dump_stack+0xf9/0x1be
[  157.460553]  check_preemption_disabled+0x1d6/0x200
[  157.460576]  ip6mr_forward2+0x73e/0x10e0
[  157.460705]  ip6_mr_forward+0x9a0/0x1510
[  157.460771]  ip6mr_mfc_add+0x16b3/0x1e00
[  157.461155]  ip6_mroute_setsockopt+0x3cb/0x13c0
[  157.461384]  do_ipv6_setsockopt.isra.8+0x348/0x4060
[  157.462013]  ipv6_setsockopt+0x90/0x110
[  157.462036]  rawv6_setsockopt+0x4a/0x120
[  157.462058]  __sys_setsockopt+0x16b/0x340
[  157.462198]  __x64_sys_setsockopt+0xbf/0x160
[  157.462220]  do_syscall_64+0x14d/0x610
[  157.462349]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 0912ea38de ("[IPV6] MROUTE: Add stats in multicast routing module method ip6_mr_forward().")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04 10:55:48 -08:00
Francesco Ruggeri 9036b2fe09 net: ipv6: add socket option IPV6_ROUTER_ALERT_ISOLATE
By default IPv6 socket with IPV6_ROUTER_ALERT socket option set will
receive all IPv6 RA packets from all namespaces.
IPV6_ROUTER_ALERT_ISOLATE socket option restricts packets received by
the socket to be only from the socket's namespace.

Signed-off-by: Maxim Martynov <maxim@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03 21:05:10 -08:00
David S. Miller 4e7df119d9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter/IPVS updates for net-next:

1) Add .release_ops to properly unroll .select_ops, use it from nft_compat.
   After this change, we can remove list of extensions too to simplify this
   codebase.

2) Update amanda conntrack helper to support v3.4, from Florian Tham.

3) Get rid of the obsolete BUGPRINT macro in ebtables, from
   Florian Westphal.

4) Merge IPv4 and IPv6 masquerading infrastructure into one single module.
   From Florian Westphal.

5) Patchset to remove nf_nat_l3proto structure to get rid of
   indirections, from Florian Westphal.

6) Skip unnecessary conntrack timeout updates in case the value is
   still the same, also from Florian Westphal.

7) Remove unnecessary 'fall through' comments in empty switch cases,
   from Li RongQing.

8) Fix lookup to fixed size hashtable sets on big endian with 32-bit keys.

9) Incorrect logic to deactivate path of fixed size hashtable sets,
   element was being tested to self.

10) Remove nft_hash_key(), the bitmap set is always selected for 16-bit
    keys.

11) Use boolean whenever possible in IPVS codebase, from Andrea Claudi.

12) Enter close state in conntrack if RST matches exact sequence number,
    from Florian Westphal.

13) Initialize dst_cache in tunnel extension, from wenxu.

14) Pass protocol as u16 to xt_check_match and xt_check_target, from
    Li RongQing.

15) SCTP header is granted to be in a linear area from IPVS NAT handler,
    from Xin Long.

16) Don't steal packets coming from slave VRF device from the
    ip_sabotage_in() path, from David Ahern.

17) Fix unsafe update of basechain stats, from Li RongQing.

18) Make sure CONNTRACK_LOCKS is power of 2 to let compiler optimize
    modulo operation as bitwise AND, from Li RongQing.

19) Use device_attribute instead of internal definition in the IDLETIMER
    target, from Sami Tolvanen.

20) Merge redir, masq and IPv4/IPv6 NAT chain types, from Florian Westphal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-02 14:01:04 -08:00
David S. Miller 9eb359140c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2019-03-02 12:54:35 -08:00
Mao Wenan 07f12b26e2 net: sit: fix memory leak in sit_init_net()
If register_netdev() is failed to register sitn->fb_tunnel_dev,
it will go to err_reg_dev and forget to free netdev(sitn->fb_tunnel_dev).

BUG: memory leak
unreferenced object 0xffff888378daad00 (size 512):
  comm "syz-executor.1", pid 4006, jiffies 4295121142 (age 16.115s)
  hex dump (first 32 bytes):
    00 e6 ed c0 83 88 ff ff 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
backtrace:
    [<00000000d6dcb63e>] kvmalloc include/linux/mm.h:577 [inline]
    [<00000000d6dcb63e>] kvzalloc include/linux/mm.h:585 [inline]
    [<00000000d6dcb63e>] netif_alloc_netdev_queues net/core/dev.c:8380 [inline]
    [<00000000d6dcb63e>] alloc_netdev_mqs+0x600/0xcc0 net/core/dev.c:8970
    [<00000000867e172f>] sit_init_net+0x295/0xa40 net/ipv6/sit.c:1848
    [<00000000871019fa>] ops_init+0xad/0x3e0 net/core/net_namespace.c:129
    [<00000000319507f6>] setup_net+0x2ba/0x690 net/core/net_namespace.c:314
    [<0000000087db4f96>] copy_net_ns+0x1dc/0x330 net/core/net_namespace.c:437
    [<0000000057efc651>] create_new_namespaces+0x382/0x730 kernel/nsproxy.c:107
    [<00000000676f83de>] copy_namespaces+0x2ed/0x3d0 kernel/nsproxy.c:165
    [<0000000030b74bac>] copy_process.part.27+0x231e/0x6db0 kernel/fork.c:1919
    [<00000000fff78746>] copy_process kernel/fork.c:1713 [inline]
    [<00000000fff78746>] _do_fork+0x1bc/0xe90 kernel/fork.c:2224
    [<000000001c2e0d1c>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
    [<00000000ec48bd44>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
    [<0000000039acff8a>] 0xffffffffffffffff

Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-02 00:53:23 -08:00
Hangbin Liu 5e1a99eae8 ipv4: Add ICMPv6 support when parse route ipproto
For ip rules, we need to use 'ipproto ipv6-icmp' to match ICMPv6 headers.
But for ip -6 route, currently we only support tcp, udp and icmp.

Add ICMPv6 support so we can match ipv6-icmp rules for route lookup.

v2: As David Ahern and Sabrina Dubroca suggested, Add an argument to
rtm_getroute_parse_ip_proto() to handle ICMP/ICMPv6 with different family.

Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: eacb9384a3 ("ipv6: support sport, dport and ip_proto in RTM_GETROUTE")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01 16:41:27 -08:00
Florian Westphal db8ab38880 netfilter: nf_tables: merge ipv4 and ipv6 nat chain types
Merge the ipv4 and ipv6 nat chain type. This is the last
missing piece which allows to provide inet family support
for nat in a follow patch.

The kconfig knobs for ipv4/ipv6 nat chain are removed, the
nat chain type will be built unconditionally if NFT_NAT
expression is enabled.

Before:
   text	   data	    bss	    dec	    hex	filename
   1576     896       0    2472     9a8 nft_chain_nat_ipv4.ko
   1697     896       0    2593     a21 nft_chain_nat_ipv6.ko

After:
   text	   data	    bss	    dec	    hex	filename
   1832     896       0    2728     aa8 nft_chain_nat.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-03-01 14:36:59 +01:00
Florian Westphal a9ce849e78 netfilter: nf_tables: nat: merge nft_masq protocol specific modules
The family specific masq modules are way too small to warrant
an extra module, just place all of them in nft_masq.

before:
  text	   data	    bss	    dec	    hex	filename
   1001	    832	      0	   1833	    729	nft_masq.ko
    766	    896	      0	   1662	    67e	nft_masq_ipv4.ko
    764	    896	      0	   1660	    67c	nft_masq_ipv6.ko

after:
   2010	    960	      0	   2970	    b9a	nft_masq.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-03-01 14:36:59 +01:00
Florian Westphal c78efc99c7 netfilter: nf_tables: nat: merge nft_redir protocol specific modules
before:
 text	   data	    bss	    dec	    hex	filename
 990	    832	      0	   1822	    71e nft_redir.ko
 697	    896	      0	   1593	    639 nft_redir_ipv4.ko
 713	    896	      0	   1609	    649	nft_redir_ipv6.ko

after:
 text	   data	    bss	    dec	    hex	filename
 1910	    960	      0	   2870	    b36	nft_redir.ko

size is reduced, all helpers from nft_redir.ko can be made static.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-03-01 14:36:58 +01:00
Florian Westphal d2c5c103b1 netfilter: nat: remove nf_nat_l3proto.h and nf_nat_core.h
The l3proto name is gone, its header file is the last trace.
While at it, also remove nf_nat_core.h, its very small and all users
include nf_nat.h too.

before:
   text    data     bss     dec     hex filename
  22948    1612    4136   28696    7018 nf_nat.ko

after removal of l3proto register/unregister functions:
   text	   data	    bss	    dec	    hex	filename
  22196	   1516	   4136	  27848	   6cc8 nf_nat.ko

checkpatch complains about overly long lines, but line breaks
do not make things more readable and the line length gets smaller
here, not larger.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-27 10:54:08 +01:00
Florian Westphal 3bf195ae60 netfilter: nat: merge nf_nat_ipv4,6 into nat core
before:
   text    data     bss     dec     hex filename
  16566    1576    4136   22278    5706 nf_nat.ko
   3598	    844	      0	   4442	   115a	nf_nat_ipv6.ko
   3187	    844	      0	   4031	    fbf	nf_nat_ipv4.ko

after:
   text    data     bss     dec     hex filename
  22948    1612    4136   28696    7018 nf_nat.ko

... with ipv4/v6 nat now provided directly via nf_nat.ko.

Also changes:
       ret = nf_nat_ipv4_fn(priv, skb, state);
       if (ret != NF_DROP && ret != NF_STOLEN &&
into
	if (ret != NF_ACCEPT)
		return ret;

everywhere.

The nat hooks never should return anything other than
ACCEPT or DROP (and the latter only in rare error cases).

The original code uses multi-line ANDing including assignment-in-if:
        if (ret != NF_DROP && ret != NF_STOLEN &&
           !(IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED) &&
            (ct = nf_ct_get(skb, &ctinfo)) != NULL) {

I removed this while moving, breaking those in separate conditionals
and moving the assignments into extra lines.

checkpatch still generates some warnings:
 1. Overly long lines (of moved code).
    Breaking them is even more ugly. so I kept this as-is.
 2. use of extern function declarations in a .c file.
    This is necessary evil, we must call
    nf_nat_l3proto_register() from the nat core now.
    All l3proto related functions are removed later in this series,
    those prototypes are then removed as well.

v2: keep empty nf_nat_ipv6_csum_update stub for CONFIG_IPV6=n case.
v3: remove IS_ENABLED(NF_NAT_IPV4/6) tests, NF_NAT_IPVx toggles
    are removed here.
v4: also get rid of the assignments in conditionals.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-27 10:49:55 +01:00
Florian Westphal 096d09067a netfilter: nat: move nlattr parse and xfrm session decode to core
None of these functions calls any external functions, moving them allows
to avoid both the indirection and a need to export these symbols.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-27 10:49:42 +01:00
Florian Westphal d1aca8ab31 netfilter: nat: merge ipv4 and ipv6 masquerade functionality
Before:
   text	   data	    bss	    dec	    hex	filename
  13916	   1412	   4128	  19456	   4c00	nf_nat.ko
   4510	    968	      4	   5482	   156a	nf_nat_ipv4.ko
   5146	    944	      8	   6098	   17d2	nf_nat_ipv6.ko

After:
   text	   data	    bss	    dec	    hex	filename
  16566	   1576	   4136	  22278	   5706	nf_nat.ko
   3187	    844	      0	   4031	    fbf	nf_nat_ipv4.ko
   3598	    844	      0	   4442	   115a	nf_nat_ipv6.ko

... so no drastic changes in combined size.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-27 10:49:24 +01:00
David Ahern e3818541b4 ipv6: Return error for RTA_VIA attribute
IPv6 currently does not support nexthops outside of the AF_INET6 family.
Specifically, it does not handle RTA_VIA attribute. If it is passed
in a route add request, the actual route added only uses the device
which is clearly not what the user intended:

  $ ip -6 ro add 2001:db8:2::/64 via inet 172.16.1.1 dev eth0
  $ ip ro ls
  ...
  2001:db8:2::/64 dev eth0 metric 1024 pref medium

Catch this and fail the route add:
  $ ip -6 ro add 2001:db8:2::/64 via inet 172.16.1.1 dev eth0
  Error: IPv6 does not support RTA_VIA attribute.

Fixes: 03c0566542 ("mpls: Netlink commands to add, remove, and dump routes")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-26 13:23:17 -08:00
Peter Oskolkov d8cf757fbd net: remove unused struct inet_frag_queue.fragments field
Now that all users of struct inet_frag_queue have been converted
to use 'rb_fragments', remove the unused 'fragments' field.

Build with `make allyesconfig` succeeded. ip_defrag selftest passed.

Signed-off-by: Peter Oskolkov <posk@google.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-26 08:27:05 -08:00
Yafang Shao 9946b3410b tcp: clean up SOCK_DEBUG()
Per discussion with Daniel[1] and Eric[2], these SOCK_DEBUG() calles in
TCP are not needed now.
We'd better clean up it.

[1] https://patchwork.ozlabs.org/patch/1035573/
[2] https://patchwork.ozlabs.org/patch/1040533/

Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25 09:41:14 -08:00
Kefeng Wang 75efc250d2 ipv6: icmp: use percpu allocation
Use percpu allocation for the ipv6.icmp_sk.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24 21:57:26 -08:00
Kefeng Wang 3232a1ef0f ipv6: icmp: use icmpv6_sk_exit()
Simply use icmpv6_sk_exit() when inet_ctl_sock_create() fail
in icmpv6_sk_init().

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24 21:57:26 -08:00
Herbert Xu 4ef595cbb3 ila: Fix uninitialised return value in ila_xlat_nl_cmd_flush
This patch fixes an uninitialised return value error in
ila_xlat_nl_cmd_flush.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 6c4128f658 ("rhashtable: Remove obsolete...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24 21:54:44 -08:00
David S. Miller 70f3522614 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Three conflicts, one of which, for marvell10g.c is non-trivial and
requires some follow-up from Heiner or someone else.

The issue is that Heiner converted the marvell10g driver over to
use the generic c45 code as much as possible.

However, in 'net' a bug fix appeared which makes sure that a new
local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0
is cleared.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24 12:06:19 -08:00
Paolo Abeni 424a7cd078 udpv6: fix possible user after free in error handler
Before derefencing the encap pointer, commit e7cc082455 ("udp: Support
for error handlers of tunnels with arbitrary destination port") checks
for a NULL value, but the two fetch operation can race with removal.
Fix the above using a single access.
Also fix a couple of type annotations, to make sparse happy.

Fixes: e7cc082455 ("udp: Support for error handlers of tunnels with arbitrary destination port")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22 16:05:11 -08:00
Paolo Abeni 5de362df44 fou6: fix proto error handler argument type
Last argument of gue6_err_proto_handler() has a wrong type annotation,
fix it and make sparse happy again.

Fixes: b8a51b38e4 ("fou, fou6: ICMP error handlers for FoU and GUE")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22 16:05:11 -08:00
Paolo Abeni 543fc3fb41 udpv6: add the required annotation to mib type
In commit 029a374348 ("udp6: cleanup stats accounting in recvmsg()")
I forgot to add the percpu annotation for the mib pointer. Add it, and
make sparse happy.

Fixes: 029a374348 ("udp6: cleanup stats accounting in recvmsg()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22 16:05:11 -08:00
Kalash Nainwal 97f0082a05 net: Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255
Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255 to
keep legacy software happy. This is similar to what was done for
ipv4 in commit 709772e6e0 ("net: Fix routing tables with
id > 255 for legacy software").

Signed-off-by: Kalash Nainwal <kalash@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22 15:21:27 -08:00
Paolo Abeni f5b51fe804 ipv6: route: purge exception on removal
When a netdevice is unregistered, we flush the relevant exception
via rt6_sync_down_dev() -> fib6_ifdown() -> fib6_del() -> fib6_del_route().

Finally, we end-up calling rt6_remove_exception(), where we release
the relevant dst, while we keep the references to the related fib6_info and
dev. Such references should be released later when the dst will be
destroyed.

There are a number of caches that can keep the exception around for an
unlimited amount of time - namely dst_cache, possibly even socket cache.
As a result device registration may hang, as demonstrated by this script:

ip netns add cl
ip netns add rt
ip netns add srv
ip netns exec rt sysctl -w net.ipv6.conf.all.forwarding=1

ip link add name cl_veth type veth peer name cl_rt_veth
ip link set dev cl_veth netns cl
ip -n cl link set dev cl_veth up
ip -n cl addr add dev cl_veth 2001::2/64
ip -n cl route add default via 2001::1

ip -n cl link add tunv6 type ip6tnl mode ip6ip6 local 2001::2 remote 2002::1 hoplimit 64 dev cl_veth
ip -n cl link set tunv6 up
ip -n cl addr add 2013::2/64 dev tunv6

ip link set dev cl_rt_veth netns rt
ip -n rt link set dev cl_rt_veth up
ip -n rt addr add dev cl_rt_veth 2001::1/64

ip link add name rt_srv_veth type veth peer name srv_veth
ip link set dev srv_veth netns srv
ip -n srv link set dev srv_veth up
ip -n srv addr add dev srv_veth 2002::1/64
ip -n srv route add default via 2002::2

ip -n srv link add tunv6 type ip6tnl mode ip6ip6 local 2002::1 remote 2001::2 hoplimit 64 dev srv_veth
ip -n srv link set tunv6 up
ip -n srv addr add 2013::1/64 dev tunv6

ip link set dev rt_srv_veth netns rt
ip -n rt link set dev rt_srv_veth up
ip -n rt addr add dev rt_srv_veth 2002::2/64

ip netns exec srv netserver & sleep 0.1
ip netns exec cl ping6 -c 4 2013::1
ip netns exec cl netperf -H 2013::1 -t TCP_STREAM -l 3 & sleep 1
ip -n rt link set dev rt_srv_veth mtu 1400
wait %2

ip -n cl link del cl_veth

This commit addresses the issue purging all the references held by the
exception at time, as we currently do for e.g. ipv6 pcpu dst entries.

v1 -> v2:
 - re-order the code to avoid accessing dst and net after dst_dev_put()

Fixes: 93531c6743 ("net/ipv6: separate handling of FIB entries from dst based routes")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22 11:45:25 -08:00
Lorenzo Bianconi efcc9bcaf7 net: ip6_gre: fix possible NULL pointer dereference in ip6erspan_set_version
Fix a possible NULL pointer dereference in ip6erspan_set_version checking
nlattr data pointer

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 7549 Comm: syz-executor432 Not tainted 5.0.0-rc6-next-20190218
#37
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:ip6erspan_set_version+0x5c/0x350 net/ipv6/ip6_gre.c:1726
Code: 07 38 d0 7f 08 84 c0 0f 85 9f 02 00 00 49 8d bc 24 b0 00 00 00 c6 43
54 01 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f
85 9a 02 00 00 4d 8b ac 24 b0 00 00 00 4d 85 ed 0f
RSP: 0018:ffff888089ed7168 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff8880869d6e58 RCX: 0000000000000000
RDX: 0000000000000016 RSI: ffffffff862736b4 RDI: 00000000000000b0
RBP: ffff888089ed7180 R08: 1ffff11010d3adcb R09: ffff8880869d6e58
R10: ffffed1010d3add5 R11: ffff8880869d6eaf R12: 0000000000000000
R13: ffffffff8931f8c0 R14: ffffffff862825d0 R15: ffff8880869d6e58
FS:  0000000000b3d880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000184 CR3: 0000000092cc5000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  ip6erspan_newlink+0x66/0x7b0 net/ipv6/ip6_gre.c:2210
  __rtnl_newlink+0x107b/0x16c0 net/core/rtnetlink.c:3176
  rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3234
  rtnetlink_rcv_msg+0x465/0xb00 net/core/rtnetlink.c:5192
  netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2485
  rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5210
  netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
  netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1336
  netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1925
  sock_sendmsg_nosec net/socket.c:621 [inline]
  sock_sendmsg+0xdd/0x130 net/socket.c:631
  ___sys_sendmsg+0x806/0x930 net/socket.c:2136
  __sys_sendmsg+0x105/0x1d0 net/socket.c:2174
  __do_sys_sendmsg net/socket.c:2183 [inline]
  __se_sys_sendmsg net/socket.c:2181 [inline]
  __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2181
  do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x440159
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fffa69156e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440159
RDX: 0000000000000000 RSI: 0000000020001340 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000001 R09: 00000000004002c8
R10: 0000000000000011 R11: 0000000000000246 R12: 00000000004019e0
R13: 0000000000401a70 R14: 0000000000000000 R15: 0000000000000000
Modules linked in:
---[ end trace 09f8a7d13b4faaa1 ]---
RIP: 0010:ip6erspan_set_version+0x5c/0x350 net/ipv6/ip6_gre.c:1726
Code: 07 38 d0 7f 08 84 c0 0f 85 9f 02 00 00 49 8d bc 24 b0 00 00 00 c6 43
54 01 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f
85 9a 02 00 00 4d 8b ac 24 b0 00 00 00 4d 85 ed 0f
RSP: 0018:ffff888089ed7168 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff8880869d6e58 RCX: 0000000000000000
RDX: 0000000000000016 RSI: ffffffff862736b4 RDI: 00000000000000b0
RBP: ffff888089ed7180 R08: 1ffff11010d3adcb R09: ffff8880869d6e58
R10: ffffed1010d3add5 R11: ffff8880869d6eaf R12: 0000000000000000
R13: ffffffff8931f8c0 R14: ffffffff862825d0 R15: ffff8880869d6e58
FS:  0000000000b3d880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000184 CR3: 0000000092cc5000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 4974d5f678 ("net: ip6_gre: initialize erspan_ver just for erspan tunnels")
Reported-and-tested-by: syzbot+30191cf1057abd3064af@syzkaller.appspotmail.com
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22 11:41:26 -08:00
Herbert Xu 6c4128f658 rhashtable: Remove obsolete rhashtable_walk_init function
The rhashtable_walk_init function has been obsolete for more than
two years.  This patch finally converts its last users over to
rhashtable_walk_enter and removes it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22 13:49:00 +01:00
David S. Miller b35560e485 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:

====================
pull request (net): ipsec 2019-02-21

1) Don't do TX bytes accounting for the esp trailer when sending
   from a request socket as this will result in an out of bounds
   memory write. From Martin Willi.

2) Destroy xfrm_state synchronously on net exit path to
   avoid nested gc flush callbacks that may trigger a
   warning in xfrm6_tunnel_net_exit(). From Cong Wang.

3) Do an unconditionally clone in pfkey_broadcast_one()
   to avoid a race when freeing the skb.
   From Sean Tranchetti.

4) Fix inbound traffic via XFRM interfaces across network
   namespaces. We did the lookup for interfaces and policies
   in the wrong namespace. From Tobias Brunner.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21 16:08:52 -08:00
Lorenzo Bianconi 103d0244d2 net: ip6_gre: do not report erspan_ver for ip6gre or ip6gretap
Report erspan version field to userspace in ip6gre_fill_info just for
erspan_v6 tunnels. Moreover report IFLA_GRE_ERSPAN_INDEX only for
erspan version 1.
The issue can be triggered with the following reproducer:

$ip link add name gre6 type ip6gre local 2001::1 remote 2002::2
$ip link set gre6 up
$ip -d link sh gre6
14: grep6@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1448 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/gre6 2001::1 peer 2002::2 promiscuity 0 minmtu 0 maxmtu 0
    ip6gre remote 2002::2 local 2001::1 hoplimit 64 encaplimit 4 tclass 0x00 flowlabel 0x00000 erspan_index 0 erspan_ver 0 addrgenmode eui64

Fixes: 94d7d8f292 ("ip6_gre: add erspan v2 support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21 16:02:10 -08:00
Li RongQing a2b5a3fa2c net: remove unneeded switch fall-through
This case block has been terminated by a return, so not need
a switch fall-through

Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21 13:48:00 -08:00
Callum Sinclair ca8d4794f6 ipmr: ip6mr: Create new sockopt to clear mfc cache or vifs
Currently the only way to clear the forwarding cache was to delete the
entries one by one using the MRT_DEL_MFC socket option or to destroy and
recreate the socket.

Create a new socket option which with the use of optional flags can
clear any combination of multicast entries (static or not static) and
multicast vifs (static or not static).

Calling the new socket option MRT_FLUSH with the flags MRT_FLUSH_MFC and
MRT_FLUSH_VIFS will clear all entries and vifs on the socket except for
static entries.

Signed-off-by: Callum Sinclair <callum.sinclair@alliedtelesis.co.nz>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21 13:05:05 -08:00
Paolo Abeni bf1dc8bad1 ipv6: route: enforce RCU protection in ip6_route_check_nh_onlink()
We need a RCU critical section around rt6_info->from deference, and
proper annotation.

Fixes: 4ed591c8ab ("net/ipv6: Allow onlink routes to have a device mismatch if it is the default route")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21 09:54:35 -08:00
Paolo Abeni 193f3685d0 ipv6: route: enforce RCU protection in rt6_update_exception_stamp_rt()
We must access rt6_info->from under RCU read lock: move the
dereference under such lock, with proper annotation.

v1 -> v2:
 - avoid using multiple, racy, fetch operations for rt->from

Fixes: a68886a691 ("net/ipv6: Make from in rt6_info rcu protected")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21 09:54:35 -08:00
Willem de Bruijn 418e897e07 gso: validate gso_type on ipip style tunnels
Commit 121d57af30 ("gso: validate gso_type in GSO handlers") added
gso_type validation to existing gso_segment callback functions, to
filter out illegal and potentially dangerous SKB_GSO_DODGY packets.

Convert tunnels that now call inet_gso_segment and ipv6_gso_segment
directly to have their own callbacks and extend validation to these.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 11:24:27 -08:00
David S. Miller 375ca548f7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Two easily resolvable overlapping change conflicts, one in
TCP and one in the eBPF verifier.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 00:34:07 -08:00
David S. Miller 8bbed40f10 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter/IPVS updates for you net-next
tree:

1) Missing NFTA_RULE_POSITION_ID netlink attribute validation,
   from Phil Sutter.

2) Restrict matching on tunnel metadata to rx/tx path, from wenxu.

3) Avoid indirect calls for IPV6=y, from Florian Westphal.

4) Add two indirections to prepare merger of IPV4 and IPV6 nat
   modules, from Florian Westphal.

5) Broken indentation in ctnetlink, from Colin Ian King.

6) Patches to use struct_size() from netfilter and IPVS,
   from Gustavo A. R. Silva.

7) Display kernel splat only once in case of racing to confirm
   conntrack from bridge plus nfqueue setups, from Chieh-Min Wang.

8) Skip checksum validation for layer 4 protocols that don't need it,
   patch from Alin Nastac.

9) Sparse warning due to symbol that should be static in CLUSTERIP,
   from Wei Yongjun.

10) Add new toggle to disable SDP payload translation when media
    endpoint is reachable though the same interface as the signalling
    peer, from Alin Nastac.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18 11:38:30 -08:00
David S. Miller 885e631959 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:

====================
pull-request: bpf-next 2019-02-16

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) numerous libbpf API improvements, from Andrii, Andrey, Yonghong.

2) test all bpf progs in alu32 mode, from Jiong.

3) skb->sk access and bpf_sk_fullsock(), bpf_tcp_sock() helpers, from Martin.

4) support for IP encap in lwt bpf progs, from Peter.

5) remove XDP_QUERY_XSK_UMEM dead code, from Jan.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-16 22:56:34 -08:00
Paolo Abeni 1490ed2abc net/ipv6: prefer rcu_access_pointer() over rcu_dereference()
rt6_cache_allowed_for_pmtu() checks for rt->from presence, but
it does not access the RCU protected pointer. We can use
rcu_access_pointer() and clean-up the code a bit. No functional
changes intended.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15 20:25:26 -08:00
Lorenzo Bianconi 4974d5f678 net: ip6_gre: initialize erspan_ver just for erspan tunnels
After commit c706863bc8 ("net: ip6_gre: always reports o_key to
userspace"), ip6gre and ip6gretap tunnels started reporting TUNNEL_KEY
output flag even if it is not configured.
ip6gre_fill_info checks erspan_ver value to add TUNNEL_KEY for
erspan tunnels, however in commit 84581bdae9 ("erspan: set
erspan_ver to 1 by default when adding an erspan dev")
erspan_ver is initialized to 1 even for ip6gre or ip6gretap
Fix the issue moving erspan_ver initialization in a dedicated routine

Fixes: c706863bc8 ("net: ip6_gre: always reports o_key to userspace")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15 20:14:25 -08:00
David S. Miller 3313da8188 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
The netfilter conflicts were rather simple overlapping
changes.

However, the cls_tcindex.c stuff was a bit more complex.

On the 'net' side, Cong is fixing several races and memory
leaks.  Whilst on the 'net-next' side we have Vlad adding
the rtnl-ness support.

What I've decided to do, in order to resolve this, is revert the
conversion over to using a workqueue that Cong did, bringing us back
to pure RCU.  I did it this way because I believe that either Cong's
races don't apply with have Vlad did things, or Cong will have to
implement the race fix slightly differently.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15 12:38:38 -08:00
Peter Oskolkov 9b0a6a9dba ipv6_stub: add ipv6_route_input stub/proxy.
Proxy ip6_route_input via ipv6_stub, for later use by lwt bpf ip encap
(see the next patch in the patchset).

Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-02-13 18:27:55 -08:00
Alin Nastac 7fc3822536 netfilter: reject: skip csum verification for protocols that don't support it
Some protocols have other means to verify the payload integrity
(AH, ESP, SCTP) while others are incompatible with nf_ip(6)_checksum
implementation because checksum is either optional or might be
partial (UDPLITE, DCCP, GRE). Because nf_ip(6)_checksum was used
to validate the packets, ip(6)tables REJECT rules were not capable
to generate ICMP(v6) errors for the protocols mentioned above.

This commit also fixes the incorrect pseudo-header protocol used
for IPv4 packets that carry other transport protocols than TCP or
UDP (pseudo-header used protocol 0 iso the proper value).

Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-13 10:03:53 +01:00
Li RongQing d1f20798a1 ipv6: propagate genlmsg_reply return code
genlmsg_reply can fail, so propagate its return code

Fixes: 915d7e5e59 ("ipv6: sr: add code base for control plane support of SR-IPv6")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12 12:36:02 -05:00
Zhiqiang Liu e75913c93f net: fix IPv6 prefix route residue
Follow those steps:
 # ip addr add 2001:123::1/32 dev eth0
 # ip addr add 2001:123:456::2/64 dev eth0
 # ip addr del 2001:123::1/32 dev eth0
 # ip addr del 2001:123:456::2/64 dev eth0
and then prefix route of 2001:123::1/32 will still exist.

This is because ipv6_prefix_equal in check_cleanup_prefix_route
func does not check whether two IPv6 addresses have the same
prefix length. If the prefix of one address starts with another
shorter address prefix, even though their prefix lengths are
different, the return value of ipv6_prefix_equal is true.

Here I add a check of whether two addresses have the same prefix
to decide whether their prefixes are equal.

Fixes: 5b84efecb7 ("ipv6 addrconf: don't cleanup prefix route for IFA_F_NOPREFIXROUTE")
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Reported-by: Wenhao Zhang <zhangwenhao8@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-11 20:36:50 -08:00
Florian Westphal 8303b7e8f0 netfilter: nat: fix spurious connection timeouts
Sander Eikelenboom bisected a NAT related regression down
to the l4proto->manip_pkt indirection removal.

I forgot that ICMP(v6) errors (e.g. PKTTOOBIG) can be set as related
to the existing conntrack entry.

Therefore, when passing the skb to nf_nat_ipv4/6_manip_pkt(), that
ended up calling the wrong l4 manip function, as tuple->dst.protonum
is the original flows l4 protocol (TCP, UDP, etc).

Set the dst protocol field to ICMP(v6), we already have a private copy
of the tuple due to the inversion of src/dst.

Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Fixes: faec18dbb0 ("netfilter: nat: remove l4proto->manip_pkt")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-11 17:43:17 +01:00
David S. Miller a655fe9f19 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
An ipvlan bug fix in 'net' conflicted with the abstraction away
of the IPV6 specific support in 'net-next'.

Similarly, a bug fix for mlx5 in 'net' conflicted with the flow
action conversion in 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08 15:00:17 -08:00
Hangbin Liu 173656acca sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
If we disabled IPv6 from the kernel command line (ipv6.disable=1), we should
not call ip6_err_gen_icmpv6_unreach(). This:

  ip link add sit1 type sit local 192.0.2.1 remote 192.0.2.2 ttl 1
  ip link set sit1 up
  ip addr add 198.51.100.1/24 dev sit1
  ping 198.51.100.2

if IPv6 is disabled at boot time, will crash the kernel.

v2: there's no need to use in6_dev_get(), use __in6_dev_get() instead,
    as we only need to check that idev exists and we are under
    rcu_read_lock() (from netif_receive_skb_internal()).

Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: ca15a078bd ("sit: generate icmpv6 error when receiving icmpv4 error")
Cc: Oussama Ghorbel <ghorbel@pivasoftware.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-07 10:48:42 -08:00
Eli Cooper 15df03c661 netfilter: ipv6: Don't preserve original oif for loopback address
Commit 508b09046c ("netfilter: ipv6: Preserve link scope traffic
original oif") made ip6_route_me_harder() keep the original oif for
link-local and multicast packets. However, it also affected packets
for the loopback address because it used rt6_need_strict().

REDIRECT rules in the OUTPUT chain rewrite the destination to loopback
address; thus its oif should not be preserved. This commit fixes the bug
that redirected local packets are being dropped. Actually the packet was
not exactly dropped; Instead it was sent out to the original oif rather
than lo. When a packet with daddr ::1 is sent to the router, it is
effectively dropped.

Fixes: 508b09046c ("netfilter: ipv6: Preserve link scope traffic original oif")
Signed-off-by: Eli Cooper <elicooper@gmx.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-05 14:10:33 +01:00
Cong Wang f75a2804da xfrm: destroy xfrm_state synchronously on net exit path
xfrm_state_put() moves struct xfrm_state to the GC list
and schedules the GC work to clean it up. On net exit call
path, xfrm_state_flush() is called to clean up and
xfrm_flush_gc() is called to wait for the GC work to complete
before exit.

However, this doesn't work because one of the ->destructor(),
ipcomp_destroy(), schedules the same GC work again inside
the GC work. It is hard to wait for such a nested async
callback. This is also why syzbot still reports the following
warning:

 WARNING: CPU: 1 PID: 33 at net/ipv6/xfrm6_tunnel.c:351 xfrm6_tunnel_net_exit+0x2cb/0x500 net/ipv6/xfrm6_tunnel.c:351
 ...
  ops_exit_list.isra.0+0xb0/0x160 net/core/net_namespace.c:153
  cleanup_net+0x51d/0xb10 net/core/net_namespace.c:551
  process_one_work+0xd0c/0x1ce0 kernel/workqueue.c:2153
  worker_thread+0x143/0x14a0 kernel/workqueue.c:2296
  kthread+0x357/0x430 kernel/kthread.c:246
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352

In fact, it is perfectly fine to bypass GC and destroy xfrm_state
synchronously on net exit call path, because it is in process context
and doesn't need a work struct to do any blocking work.

This patch introduces xfrm_state_put_sync() which simply bypasses
GC, and lets its callers to decide whether to use this synchronous
version. On net exit path, xfrm_state_fini() and
xfrm6_tunnel_net_exit() use it. And, as ipcomp_destroy() itself is
blocking, it can use xfrm_state_put_sync() directly too.

Also rename xfrm_state_gc_destroy() to ___xfrm_state_destroy() to
reflect this change.

Fixes: b48c05ab5d ("xfrm: Fix warning in xfrm6_tunnel_net_exit.")
Reported-and-tested-by: syzbot+e9aebef558e3ed673934@syzkaller.appspotmail.com
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-02-05 06:29:20 +01:00
Florian Westphal ac02bcf9cc netfilter: ipv6: avoid indirect calls for IPV6=y case
indirect calls are only needed if ipv6 is a module.
Add helpers to abstract the v6ops indirections and use them instead.

fragment, reroute and route_input are kept as indirect calls.
The first two are not not used in hot path and route_input is only
used by bridge netfilter.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-04 18:21:12 +01:00
Florian Westphal 960587285a netfilter: nat: remove module dependency on ipv6 core
nf_nat_ipv6 calls two ipv6 core functions, so add those to v6ops to avoid
the module dependency.

This is a prerequisite for merging ipv4 and ipv6 nat implementations.

Add wrappers to avoid the indirection if ipv6 is builtin.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-04 18:20:19 +01:00
Yohei Kanemaru ef489749aa ipv6: sr: clear IP6CB(skb) on SRH ip4ip6 encapsulation
skb->cb may contain data from previous layers (in an observed case
IPv4 with L3 Master Device). In the observed scenario, the data in
IPCB(skb)->frags was misinterpreted as IP6CB(skb)->frag_max_size,
eventually caused an unexpected IPv6 fragmentation in ip6_fragment()
through ip6_finish_output().

This patch clears IP6CB(skb), which potentially contains garbage data,
on the SRH ip4ip6 encapsulation.

Fixes: 32d99d0b67 ("ipv6: sr: add support for ip4ip6 encapsulation")
Signed-off-by: Yohei Kanemaru <yohei.kanemaru@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30 14:06:12 -08:00
Lorenzo Bianconi c706863bc8 net: ip6_gre: always reports o_key to userspace
As Erspan_v4, Erspan_v6 protocol relies on o_key to configure
session id header field. However TUNNEL_KEY bit is cleared in
ip6erspan_tunnel_xmit since ERSPAN protocol does not set the key field
of the external GRE header and so the configured o_key is not reported
to userspace. The issue can be triggered with the following reproducer:

$ip link add ip6erspan1 type ip6erspan local 2000::1 remote 2000::2 \
    key 1 seq erspan_ver 1
$ip link set ip6erspan1 up
ip -d link sh ip6erspan1

ip6erspan1@NONE: <BROADCAST,MULTICAST> mtu 1422 qdisc noop state DOWN mode DEFAULT
    link/ether ba:ff:09:24:c3:0e brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500
    ip6erspan remote 2000::2 local 2000::1 encaplimit 4 flowlabel 0x00000 ikey 0.0.0.1 iseq oseq

Fix the issue adding TUNNEL_KEY bit to the o_flags parameter in
ip6gre_fill_info

Fixes: 5a963eb61b ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30 14:00:02 -08:00
David S. Miller eaf2a47f40 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2019-01-29 21:18:54 -08:00
David S. Miller 343917b410 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter/IPVS updates for your net-next tree:

1) Introduce a hashtable to speed up object lookups, from Florian Westphal.

2) Make direct calls to built-in extension, also from Florian.

3) Call helper before confirming the conntrack as it used to be originally,
   from Florian.

4) Call request_module() to autoload br_netfilter when physdev is used
   to relax the dependency, also from Florian.

5) Allow to insert rules at a given position ID that is internal to the
   batch, from Phil Sutter.

6) Several patches to replace conntrack indirections by direct calls,
   and to reduce modularization, from Florian. This also includes
   several follow up patches to deal with minor fallout from this
   rework.

7) Use RCU from conntrack gre helper, from Florian.

8) GRE conntrack module becomes built-in into nf_conntrack, from Florian.

9) Replace nf_ct_invert_tuplepr() by calls to nf_ct_invert_tuple(),
   from Florian.

10) Unify sysctl handling at the core of nf_conntrack, from Florian.

11) Provide modparam to register conntrack hooks.

12) Allow to match on the interface kind string, from wenxu.

13) Remove several exported symbols, not required anymore now after
    a bit of de-modulatization work has been done, from Florian.

14) Remove built-in map support in the hash extension, this can be
    done with the existing userspace infrastructure, from laura.

15) Remove indirection to calculate checksums in IPVS, from Matteo Croce.

16) Use call wrappers for indirection in IPVS, also from Matteo.

17) Remove superfluous __percpu parameter in nft_counter, patch from
    Luc Van Oostenryck.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28 17:34:38 -08:00
Martin Willi 09db512411 esp: Skip TX bytes accounting when sending from a request socket
On ESP output, sk_wmem_alloc is incremented for the added padding if a
socket is associated to the skb. When replying with TCP SYNACKs over
IPsec, the associated sk is a casted request socket, only. Increasing
sk_wmem_alloc on a request socket results in a write at an arbitrary
struct offset. In the best case, this produces the following WARNING:

WARNING: CPU: 1 PID: 0 at lib/refcount.c:102 esp_output_head+0x2e4/0x308 [esp4]
refcount_t: addition on 0; use-after-free.
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.0.0-rc3 #2
Hardware name: Marvell Armada 380/385 (Device Tree)
[...]
[<bf0ff354>] (esp_output_head [esp4]) from [<bf1006a4>] (esp_output+0xb8/0x180 [esp4])
[<bf1006a4>] (esp_output [esp4]) from [<c05dee64>] (xfrm_output_resume+0x558/0x664)
[<c05dee64>] (xfrm_output_resume) from [<c05d07b0>] (xfrm4_output+0x44/0xc4)
[<c05d07b0>] (xfrm4_output) from [<c05956bc>] (tcp_v4_send_synack+0xa8/0xe8)
[<c05956bc>] (tcp_v4_send_synack) from [<c0586ad8>] (tcp_conn_request+0x7f4/0x948)
[<c0586ad8>] (tcp_conn_request) from [<c058c404>] (tcp_rcv_state_process+0x2a0/0xe64)
[<c058c404>] (tcp_rcv_state_process) from [<c05958ac>] (tcp_v4_do_rcv+0xf0/0x1f4)
[<c05958ac>] (tcp_v4_do_rcv) from [<c0598a4c>] (tcp_v4_rcv+0xdb8/0xe20)
[<c0598a4c>] (tcp_v4_rcv) from [<c056eb74>] (ip_protocol_deliver_rcu+0x2c/0x2dc)
[<c056eb74>] (ip_protocol_deliver_rcu) from [<c056ee6c>] (ip_local_deliver_finish+0x48/0x54)
[<c056ee6c>] (ip_local_deliver_finish) from [<c056eecc>] (ip_local_deliver+0x54/0xec)
[<c056eecc>] (ip_local_deliver) from [<c056efac>] (ip_rcv+0x48/0xb8)
[<c056efac>] (ip_rcv) from [<c0519c2c>] (__netif_receive_skb_one_core+0x50/0x6c)
[...]

The issue triggers only when not using TCP syncookies, as for syncookies
no socket is associated.

Fixes: cac2661c53 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-01-28 11:20:58 +01:00
Nir Dotan 146820cc24 ip6mr: Fix notifiers call on mroute_clean_tables()
When the MC route socket is closed, mroute_clean_tables() is called to
cleanup existing routes. Mistakenly notifiers call was put on the cleanup
of the unresolved MC route entries cache.
In a case where the MC socket closes before an unresolved route expires,
the notifier call leads to a crash, caused by the driver trying to
increment a non initialized refcount_t object [1] and then when handling
is done, to decrement it [2]. This was detected by a test recently added in
commit 6d4efada3b ("selftests: forwarding: Add multicast routing test").

Fix that by putting notifiers call on the resolved entries traversal,
instead of on the unresolved entries traversal.

[1]

[  245.748967] refcount_t: increment on 0; use-after-free.
[  245.754829] WARNING: CPU: 3 PID: 3223 at lib/refcount.c:153 refcount_inc_checked+0x2b/0x30
...
[  245.802357] Hardware name: Mellanox Technologies Ltd. MSN2740/SA001237, BIOS 5.6.5 06/07/2016
[  245.811873] RIP: 0010:refcount_inc_checked+0x2b/0x30
...
[  245.907487] Call Trace:
[  245.910231]  mlxsw_sp_router_fib_event.cold.181+0x42/0x47 [mlxsw_spectrum]
[  245.917913]  notifier_call_chain+0x45/0x7
[  245.922484]  atomic_notifier_call_chain+0x15/0x20
[  245.927729]  call_fib_notifiers+0x15/0x30
[  245.932205]  mroute_clean_tables+0x372/0x3f
[  245.936971]  ip6mr_sk_done+0xb1/0xc0
[  245.940960]  ip6_mroute_setsockopt+0x1da/0x5f0
...

[2]

[  246.128487] refcount_t: underflow; use-after-free.
[  246.133859] WARNING: CPU: 0 PID: 7 at lib/refcount.c:187 refcount_sub_and_test_checked+0x4c/0x60
[  246.183521] Hardware name: Mellanox Technologies Ltd. MSN2740/SA001237, BIOS 5.6.5 06/07/2016
...
[  246.193062] Workqueue: mlxsw_core_ordered mlxsw_sp_router_fibmr_event_work [mlxsw_spectrum]
[  246.202394] RIP: 0010:refcount_sub_and_test_checked+0x4c/0x60
...
[  246.298889] Call Trace:
[  246.301617]  refcount_dec_and_test_checked+0x11/0x20
[  246.307170]  mlxsw_sp_router_fibmr_event_work.cold.196+0x47/0x78 [mlxsw_spectrum]
[  246.315531]  process_one_work+0x1fa/0x3f0
[  246.320005]  worker_thread+0x2f/0x3e0
[  246.324083]  kthread+0x118/0x130
[  246.327683]  ? wq_update_unbound_numa+0x1b0/0x1b0
[  246.332926]  ? kthread_park+0x80/0x80
[  246.337013]  ret_from_fork+0x1f/0x30

Fixes: 088aa3eec2 ("ip6mr: Support fib notifications")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27 23:16:07 -08:00
Wei Wang 31954cd8bb tcp: Refactor pingpong code
Instead of using pingpong as a single bit information, we refactor the
code to treat it as a counter. When interactive session is detected,
we set pingpong count to TCP_PINGPONG_THRESH. And when pingpong count
is >= TCP_PINGPONG_THRESH, we consider the session in pingpong mode.

This patch is a pure refactor and sets foundation for the next patch.
This patch itself does not change any pingpong logic.

Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27 13:29:43 -08:00
David S. Miller 1d68101367 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2019-01-27 10:43:17 -08:00
Peter Oskolkov 997dd96471 net: IP6 defrag: use rbtrees in nf_conntrack_reasm.c
Currently, IPv6 defragmentation code drops non-last fragments that
are smaller than 1280 bytes: see
commit 0ed4229b08 ("ipv6: defrag: drop non-last frags smaller than min mtu")

This behavior is not specified in IPv6 RFCs and appears to break
compatibility with some IPv6 implemenations, as reported here:
https://www.spinics.net/lists/netdev/msg543846.html

This patch re-uses common IP defragmentation queueing and reassembly
code in IP6 defragmentation in nf_conntrack, removing the 1280 byte
restriction.

Signed-off-by: Peter Oskolkov <posk@google.com>
Reported-by: Tom Herbert <tom@herbertland.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-25 21:37:11 -08:00
Peter Oskolkov d4289fcc9b net: IP6 defrag: use rbtrees for IPv6 defrag
Currently, IPv6 defragmentation code drops non-last fragments that
are smaller than 1280 bytes: see
commit 0ed4229b08 ("ipv6: defrag: drop non-last frags smaller than min mtu")

This behavior is not specified in IPv6 RFCs and appears to break
compatibility with some IPv6 implemenations, as reported here:
https://www.spinics.net/lists/netdev/msg543846.html

This patch re-uses common IP defragmentation queueing and reassembly
code in IPv6, removing the 1280 byte restriction.

Signed-off-by: Peter Oskolkov <posk@google.com>
Reported-by: Tom Herbert <tom@herbertland.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-25 21:37:11 -08:00
Lubomir Rintel 7c62b8dd5c net/ipv6: lower the level of "link is not ready" messages
This message gets logged far too often for how interesting is it.

Most distributions nowadays configure NetworkManager to use randomly
generated MAC addresses for Wi-Fi network scans. The interfaces end up
being periodically brought down for the address change. When they're
subsequently brought back up, the message is logged, eventually flooding
the log.

Perhaps the message is not all that helpful: it seems to be more
interesting to hear when the addrconf actually start, not when it does
not. Let's lower its level.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-By: Thomas Haller <thaller@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22 20:42:39 -08:00
Jakub Kicinski 1518039f6b net/ipv6: don't return positive numbers when nothing was dumped
in6_dump_addrs() returns a positive 1 if there was nothing to dump.
This return value can not be passed as return from inet6_dump_addr()
as is, because it will confuse rtnetlink, resulting in NLMSG_DONE
never getting set:

$ ip addr list dev lo
EOF on netlink
Dump terminated

v2: flip condition to avoid a new goto (DaveA)

Fixes: 7c1e8a3817 ("netlink: fixup regression in RTM_GETADDR")
Reported-by: Brendan Galloway <brendan.galloway@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22 17:24:18 -08:00
Linus Lüssing 4b3087c7e3 bridge: Snoop Multicast Router Advertisements
When multiple multicast routers are present in a broadcast domain then
only one of them will be detectable via IGMP/MLD query snooping. The
multicast router with the lowest IP address will become the selected and
active querier while all other multicast routers will then refrain from
sending queries.

To detect such rather silent multicast routers, too, RFC4286
("Multicast Router Discovery") provides a standardized protocol to
detect multicast routers for multicast snooping switches.

This patch implements the necessary MRD Advertisement message parsing
and after successful processing adds such routers to the internal
multicast router list.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22 17:18:09 -08:00
Linus Lüssing 4effd28c12 bridge: join all-snoopers multicast address
Next to snooping IGMP/MLD queries RFC4541, section 2.1.1.a) recommends
to snoop multicast router advertisements to detect multicast routers.

Multicast router advertisements are sent to an "all-snoopers"
multicast address. To be able to receive them reliably, we need to
join this group.

Otherwise other snooping switches might refrain from forwarding these
advertisements to us.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22 17:18:08 -08:00
Linus Lüssing a2e2ca3beb bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() internals
With this patch the internal use of the skb_trimmed is reduced to
the ICMPv6/IGMP checksum verification. And for the length checks
the newly introduced helper functions are used instead of calculating
and checking with skb->len directly.

These changes should hopefully make it easier to verify that length
checks are performed properly.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22 17:18:08 -08:00
Linus Lüssing ba5ea61462 bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() calls
This patch refactors ip_mc_check_igmp(), ipv6_mc_check_mld() and
their callers (more precisely, the Linux bridge) to not rely on
the skb_trimmed parameter anymore.

An skb with its tail trimmed to the IP packet length was initially
introduced for the following three reasons:

1) To be able to verify the ICMPv6 checksum.
2) To be able to distinguish the version of an IGMP or MLD query.
   They are distinguishable only by their size.
3) To avoid parsing data for an IGMPv3 or MLDv2 report that is
   beyond the IP packet but still within the skb.

The first case still uses a cloned and potentially trimmed skb to
verfiy. However, there is no need to propagate it to the caller.
For the second and third case explicit IP packet length checks were
added.

This hopefully makes ip_mc_check_igmp() and ipv6_mc_check_mld() easier
to read and verfiy, as well as easier to use.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22 17:18:08 -08:00
Lorenzo Bianconi cb73ee40b1 net: ip_gre: use erspan key field for tunnel lookup
Use ERSPAN key header field as tunnel key in gre_parse_header routine
since ERSPAN protocol sets the key field of the external GRE header to
0 resulting in a tunnel lookup fail in ip6gre_err.
In addition remove key field parsing and pskb_may_pull check in
erspan_rcv and ip6erspan_rcv

Fixes: 5a963eb61b ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22 11:52:17 -08:00
Cong Wang 856c395cfa net: introduce a knob to control whether to inherit devconf config
There have been many people complaining about the inconsistent
behaviors of IPv4 and IPv6 devconf when creating new network
namespaces.  Currently, for IPv4, we inherit all current settings
from init_net, but for IPv6 we reset all setting to default.

This patch introduces a new /proc file
/proc/sys/net/core/devconf_inherit_init_net to control the
behavior of whether to inhert sysctl current settings from init_net.
This file itself is only available in init_net.

As demonstrated below:

Initial setup in init_net:
 # cat /proc/sys/net/ipv4/conf/all/rp_filter
 2
 # cat /proc/sys/net/ipv6/conf/all/accept_dad
 1

Default value 0 (current behavior):
 # ip netns del test
 # ip netns add test
 # ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter
 2
 # ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad
 0

Set to 1 (inherit from init_net):
 # echo 1 > /proc/sys/net/core/devconf_inherit_init_net
 # ip netns del test
 # ip netns add test
 # ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter
 2
 # ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad
 1

Set to 2 (reset to default):
 # echo 2 > /proc/sys/net/core/devconf_inherit_init_net
 # ip netns del test
 # ip netns add test
 # ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter
 0
 # ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad
 0

Set to a value out of range (invalid):
 # echo 3 > /proc/sys/net/core/devconf_inherit_init_net
 -bash: echo: write error: Invalid argument
 # echo -1 > /proc/sys/net/core/devconf_inherit_init_net
 -bash: echo: write error: Invalid argument

Reported-by: Zhu Yanjun <Yanjun.Zhu@windriver.com>
Reported-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22 11:07:21 -08:00
David S. Miller fa7f3a8d56 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Completely minor snmp doc conflict.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21 14:41:32 -08:00
Jakub Kicinski 0eff0a2741 net: ipv6: route: perform strict checks also for doit handlers
Make RTM_GETROUTE's doit handler use strict checks when
NETLINK_F_STRICT_CHK is set.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19 10:09:59 -08:00
Jakub Kicinski 5912a7750f net: ipv6: addrlabel: perform strict checks also for doit handlers
Make RTM_GETADDRLABEL's doit handler use strict checks when
NETLINK_F_STRICT_CHK is set.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19 10:09:59 -08:00
Jakub Kicinski 38d51810c4 net: ipv6: netconf: perform strict checks also for doit handlers
Make RTM_GETNETCONF's doit handler use strict checks when
NETLINK_F_STRICT_CHK is set.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19 10:09:59 -08:00
Jakub Kicinski 4b1373de73 net: ipv6: addr: perform strict checks also for doit handlers
Make RTM_GETADDR's doit handler use strict checks when
NETLINK_F_STRICT_CHK is set.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19 10:09:58 -08:00
Lorenzo Bianconi a057fed33b net: ip6_gre: remove gre_hdr_len from ip6erspan_rcv
Remove gre_hdr_len from ip6erspan_rcv routine signature since
it is not longer used

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18 13:56:44 -08:00
Florian Westphal 303e0c5589 netfilter: conntrack: avoid unneeded nf_conntrack_l4proto lookups
after removal of the packet and invert function pointers, several
places do not need to lookup the l4proto structure anymore.

Remove those lookups.
The function nf_ct_invert_tuplepr becomes redundant, replace
it with nf_ct_invert_tuple everywhere.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18 15:02:34 +01:00
Alexey Kodanev f7c46156f4 udp6: add missing rehash callback to udplite
After commit 23b0269e58 ("net: udp6: prefer listeners bound to an
address"), UDP-Lite only works when specifying a local address for
the sockets.

This is related to the problem addressed in the commit 719f835853
("udp: add rehash on connect()"). Moreover, __udp6_lib_lookup() now
looks for a socket immediately in the secondary hash table.

And this issue was found with LTP/network tests as well.

Fixes: 23b0269e58 ("net: udp6: prefer listeners bound to an address")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17 15:01:08 -08:00
David Herrmann 49b4994c14 net/ipv6/udp_tunnel: prefer SO_BINDTOIFINDEX over SO_BINDTODEVICE
The udp-tunnel setup allows binding sockets to a network device. Prefer
the new SO_BINDTOIFINDEX to avoid temporarily resolving the device-name
just to look it up in the ioctl again.

Reviewed-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17 14:55:52 -08:00
Willem de Bruijn 0f149c9fec udp: with udp_segment release on error path
Failure __ip_append_data triggers udp_flush_pending_frames, but these
tests happen later. The skb must be freed directly.

Fixes: bec1f6f697 ("udp: generate gso with UDP_SEGMENT")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-16 15:48:11 -08:00
Jakub Kicinski a5a82d8411 ipv6: route: place a warning with duplicated string with correct extack
"IPv6: " prefix is already added by pr_fmt, no need to include
it again in the pr_warn() format.  The message predates extack
support, we can replace the whole thing with an extack message.

Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-16 14:06:34 -08:00
Xin Long 20704bd163 erspan: build the header with the right proto according to erspan_ver
As said in draft-foschiano-erspan-03#section4:

   Different frame variants known as "ERSPAN Types" can be
   distinguished based on the GRE "Protocol Type" field value: Type I
   and II's value is 0x88BE while Type III's is 0x22EB [ETYPES].

So set it properly in erspan_xmit() according to erspan_ver. While at
it, also remove the unused parameter 'proto' in erspan_fb_xmit().

Fixes: 94d7d8f292 ("ip6_gre: add erspan v2 support")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-16 13:36:43 -08:00
Eric Dumazet 26fc181e6c fou, fou6: do not assume linear skbs
Both gue_err() and gue6_err() incorrectly assume
linear skbs. Fix them to use pskb_may_pull().

BUG: KMSAN: uninit-value in gue6_err+0x475/0xc40 net/ipv6/fou6.c:101
CPU: 0 PID: 18083 Comm: syz-executor1 Not tainted 5.0.0-rc1+ #7
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x173/0x1d0 lib/dump_stack.c:113
 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:600
 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313
 gue6_err+0x475/0xc40 net/ipv6/fou6.c:101
 __udp6_lib_err_encap_no_sk net/ipv6/udp.c:434 [inline]
 __udp6_lib_err_encap net/ipv6/udp.c:491 [inline]
 __udp6_lib_err+0x18d0/0x2590 net/ipv6/udp.c:522
 udplitev6_err+0x118/0x130 net/ipv6/udplite.c:27
 icmpv6_notify+0x462/0x9f0 net/ipv6/icmp.c:784
 icmpv6_rcv+0x18ac/0x3fa0 net/ipv6/icmp.c:872
 ip6_protocol_deliver_rcu+0xb5a/0x23a0 net/ipv6/ip6_input.c:394
 ip6_input_finish net/ipv6/ip6_input.c:434 [inline]
 NF_HOOK include/linux/netfilter.h:289 [inline]
 ip6_input+0x2b6/0x350 net/ipv6/ip6_input.c:443
 dst_input include/net/dst.h:450 [inline]
 ip6_rcv_finish+0x4e7/0x6d0 net/ipv6/ip6_input.c:76
 NF_HOOK include/linux/netfilter.h:289 [inline]
 ipv6_rcv+0x34b/0x3f0 net/ipv6/ip6_input.c:272
 __netif_receive_skb_one_core net/core/dev.c:4973 [inline]
 __netif_receive_skb net/core/dev.c:5083 [inline]
 process_backlog+0x756/0x10e0 net/core/dev.c:5923
 napi_poll net/core/dev.c:6346 [inline]
 net_rx_action+0x78b/0x1a60 net/core/dev.c:6412
 __do_softirq+0x53f/0x93a kernel/softirq.c:293
 do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1039
 </IRQ>
 do_softirq kernel/softirq.c:338 [inline]
 __local_bh_enable_ip+0x16f/0x1a0 kernel/softirq.c:190
 local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32
 rcu_read_unlock_bh include/linux/rcupdate.h:696 [inline]
 ip6_finish_output2+0x1d64/0x25f0 net/ipv6/ip6_output.c:121
 ip6_finish_output+0xae4/0xbc0 net/ipv6/ip6_output.c:154
 NF_HOOK_COND include/linux/netfilter.h:278 [inline]
 ip6_output+0x5ca/0x710 net/ipv6/ip6_output.c:171
 dst_output include/net/dst.h:444 [inline]
 ip6_local_out+0x164/0x1d0 net/ipv6/output_core.c:176
 ip6_send_skb+0xfa/0x390 net/ipv6/ip6_output.c:1727
 udp_v6_send_skb+0x1733/0x1d20 net/ipv6/udp.c:1169
 udpv6_sendmsg+0x424e/0x45d0 net/ipv6/udp.c:1466
 inet_sendmsg+0x54a/0x720 net/ipv4/af_inet.c:798
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg net/socket.c:631 [inline]
 ___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116
 __sys_sendmmsg+0x580/0xad0 net/socket.c:2211
 __do_sys_sendmmsg net/socket.c:2240 [inline]
 __se_sys_sendmmsg+0xbd/0xe0 net/socket.c:2237
 __x64_sys_sendmmsg+0x56/0x70 net/socket.c:2237
 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x457ec9
Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f4a5204fc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000457ec9
RDX: 00000000040001ab RSI: 0000000020000240 RDI: 0000000000000003
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4a520506d4
R13: 00000000004c4ce5 R14: 00000000004d85d8 R15: 00000000ffffffff

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:205 [inline]
 kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:159
 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176
 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185
 slab_post_alloc_hook mm/slab.h:446 [inline]
 slab_alloc_node mm/slub.c:2754 [inline]
 __kmalloc_node_track_caller+0xe9e/0xff0 mm/slub.c:4377
 __kmalloc_reserve net/core/skbuff.c:140 [inline]
 __alloc_skb+0x309/0xa20 net/core/skbuff.c:208
 alloc_skb include/linux/skbuff.h:1012 [inline]
 alloc_skb_with_frags+0x1c7/0xac0 net/core/skbuff.c:5288
 sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2091
 sock_alloc_send_skb+0xca/0xe0 net/core/sock.c:2108
 __ip6_append_data+0x42ed/0x5dc0 net/ipv6/ip6_output.c:1443
 ip6_append_data+0x3c2/0x650 net/ipv6/ip6_output.c:1619
 icmp6_send+0x2f5c/0x3c40 net/ipv6/icmp.c:574
 icmpv6_send+0xe5/0x110 net/ipv6/ip6_icmp.c:43
 ip6_link_failure+0x5c/0x2c0 net/ipv6/route.c:2231
 dst_link_failure include/net/dst.h:427 [inline]
 vti_xmit net/ipv4/ip_vti.c:229 [inline]
 vti_tunnel_xmit+0xf3b/0x1ea0 net/ipv4/ip_vti.c:265
 __netdev_start_xmit include/linux/netdevice.h:4382 [inline]
 netdev_start_xmit include/linux/netdevice.h:4391 [inline]
 xmit_one net/core/dev.c:3278 [inline]
 dev_hard_start_xmit+0x604/0xc40 net/core/dev.c:3294
 __dev_queue_xmit+0x2e48/0x3b80 net/core/dev.c:3864
 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3897
 neigh_direct_output+0x42/0x50 net/core/neighbour.c:1511
 neigh_output include/net/neighbour.h:508 [inline]
 ip6_finish_output2+0x1d4e/0x25f0 net/ipv6/ip6_output.c:120
 ip6_finish_output+0xae4/0xbc0 net/ipv6/ip6_output.c:154
 NF_HOOK_COND include/linux/netfilter.h:278 [inline]
 ip6_output+0x5ca/0x710 net/ipv6/ip6_output.c:171
 dst_output include/net/dst.h:444 [inline]
 ip6_local_out+0x164/0x1d0 net/ipv6/output_core.c:176
 ip6_send_skb+0xfa/0x390 net/ipv6/ip6_output.c:1727
 udp_v6_send_skb+0x1733/0x1d20 net/ipv6/udp.c:1169
 udpv6_sendmsg+0x424e/0x45d0 net/ipv6/udp.c:1466
 inet_sendmsg+0x54a/0x720 net/ipv4/af_inet.c:798
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg net/socket.c:631 [inline]
 ___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116
 __sys_sendmmsg+0x580/0xad0 net/socket.c:2211
 __do_sys_sendmmsg net/socket.c:2240 [inline]
 __se_sys_sendmmsg+0xbd/0xe0 net/socket.c:2237
 __x64_sys_sendmmsg+0x56/0x70 net/socket.c:2237
 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7

Fixes: b8a51b38e4 ("fou, fou6: ICMP error handlers for FoU and GUE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Stefano Brivio <sbrivio@redhat.com>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-15 22:01:31 -08:00
Hangbin Liu 80b3671e93 ip6_gre: update version related info when changing link
We forgot to update ip6erspan version related info when changing link,
which will cause setting new hwid failed.

Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: 94d7d8f292 ("ip6_gre: add erspan v2 support")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-15 13:33:44 -08:00
Olivier Matz ab5098fa25 ip6_gre: fix tunnel list corruption for x-netns
In changelink ops, the ip6gre_net pointer is retrieved from
dev_net(dev), which is wrong in case of x-netns. Thus, the tunnel is not
unlinked from its current list and is relinked into another net
namespace. This corrupts the tunnel lists and can later trigger a kernel
oops.

Fix this by retrieving the netns from device private area.

Fixes: c8632fc30b ("net: ip6_gre: Split up ip6gre_changelink()")
Cc: Petr Machata <petrm@mellanox.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-15 13:33:44 -08:00
Eric Dumazet 7d033c9f6a ipv6: fix kernel-infoleak in ipv6_local_error()
This patch makes sure the flow label in the IPv6 header
forged in ipv6_local_error() is initialized.

BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
CPU: 1 PID: 24675 Comm: syz-executor1 Not tainted 4.20.0-rc7+ #4
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x173/0x1d0 lib/dump_stack.c:113
 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613
 kmsan_internal_check_memory+0x455/0xb00 mm/kmsan/kmsan.c:675
 kmsan_copy_to_user+0xab/0xc0 mm/kmsan/kmsan_hooks.c:601
 _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
 copy_to_user include/linux/uaccess.h:177 [inline]
 move_addr_to_user+0x2e9/0x4f0 net/socket.c:227
 ___sys_recvmsg+0x5d7/0x1140 net/socket.c:2284
 __sys_recvmsg net/socket.c:2327 [inline]
 __do_sys_recvmsg net/socket.c:2337 [inline]
 __se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334
 __x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334
 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x457ec9
Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f8750c06c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002f
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457ec9
RDX: 0000000000002000 RSI: 0000000020000400 RDI: 0000000000000005
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f8750c076d4
R13: 00000000004c4a60 R14: 00000000004d8140 R15: 00000000ffffffff

Uninit was stored to memory at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline]
 kmsan_save_stack mm/kmsan/kmsan.c:219 [inline]
 kmsan_internal_chain_origin+0x134/0x230 mm/kmsan/kmsan.c:439
 __msan_chain_origin+0x70/0xe0 mm/kmsan/kmsan_instr.c:200
 ipv6_recv_error+0x1e3f/0x1eb0 net/ipv6/datagram.c:475
 udpv6_recvmsg+0x398/0x2ab0 net/ipv6/udp.c:335
 inet_recvmsg+0x4fb/0x600 net/ipv4/af_inet.c:830
 sock_recvmsg_nosec net/socket.c:794 [inline]
 sock_recvmsg+0x1d1/0x230 net/socket.c:801
 ___sys_recvmsg+0x4d5/0x1140 net/socket.c:2278
 __sys_recvmsg net/socket.c:2327 [inline]
 __do_sys_recvmsg net/socket.c:2337 [inline]
 __se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334
 __x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334
 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline]
 kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158
 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176
 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185
 slab_post_alloc_hook mm/slab.h:446 [inline]
 slab_alloc_node mm/slub.c:2759 [inline]
 __kmalloc_node_track_caller+0xe18/0x1030 mm/slub.c:4383
 __kmalloc_reserve net/core/skbuff.c:137 [inline]
 __alloc_skb+0x309/0xa20 net/core/skbuff.c:205
 alloc_skb include/linux/skbuff.h:998 [inline]
 ipv6_local_error+0x1a7/0x9e0 net/ipv6/datagram.c:334
 __ip6_append_data+0x129f/0x4fd0 net/ipv6/ip6_output.c:1311
 ip6_make_skb+0x6cc/0xcf0 net/ipv6/ip6_output.c:1775
 udpv6_sendmsg+0x3f8e/0x45d0 net/ipv6/udp.c:1384
 inet_sendmsg+0x54a/0x720 net/ipv4/af_inet.c:798
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg net/socket.c:631 [inline]
 __sys_sendto+0x8c4/0xac0 net/socket.c:1788
 __do_sys_sendto net/socket.c:1800 [inline]
 __se_sys_sendto+0x107/0x130 net/socket.c:1796
 __x64_sys_sendto+0x6e/0x90 net/socket.c:1796
 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7

Bytes 4-7 of 28 are uninitialized
Memory access of size 28 starts at ffff8881937bfce0
Data copied to user address 0000000020000000

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-10 09:36:41 -05:00
Willem de Bruijn 4a06fa67c4 ip: on queued skb use skb_header_pointer instead of pskb_may_pull
Commit 2efd4fca70 ("ip: in cmsg IP(V6)_ORIGDSTADDR call
pskb_may_pull") avoided a read beyond the end of the skb linear
segment by calling pskb_may_pull.

That function can trigger a BUG_ON in pskb_expand_head if the skb is
shared, which it is when when peeking. It can also return ENOMEM.

Avoid both by switching to safer skb_header_pointer.

Fixes: 2efd4fca70 ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull")
Reported-by: syzbot <syzkaller@googlegroups.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-10 09:27:20 -05:00
David S. Miller 977e4899c9 Merge ra.kernel.org:/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2019-01-08

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix BSD'ism in sendmsg(2) to rewrite unspecified IPv6 dst for
   unconnected UDP sockets with [::1] _after_ cgroup BPF invocation,
   from Andrey.

2) Follow-up fix to the speculation fix where we need to reject a
   corner case for sanitation when ptr and scalars are mixed in the
   same alu op. Also, some unrelated minor doc fixes, from Daniel.

3) Fix BPF kselftest's incorrect uses of create_and_get_cgroup()
   by not assuming fd of zero value to be the result of an error
   case, from Stanislav.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-07 22:49:35 -05:00
David Ahern d4a7e9bb74 ipv6: Take rcu_read_lock in __inet6_bind for mapped addresses
I realized the last patch calls dev_get_by_index_rcu in a branch not
holding the rcu lock. Add the calls to rcu_read_lock and rcu_read_unlock.

Fixes: ec90ad3349 ("ipv6: Consider sk_bound_dev_if when binding a socket to a v4 mapped address")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-05 14:17:07 -08:00
Andrey Ignatov e8e3698408 bpf: Fix [::] -> [::1] rewrite in sys_sendmsg
sys_sendmsg has supported unspecified destination IPv6 (wildcard) for
unconnected UDP sockets since 876c7f41. When [::] is passed by user as
destination, sys_sendmsg rewrites it with [::1] to be consistent with
BSD (see "BSD'ism" comment in the code).

This didn't work when cgroup-bpf was enabled though since the rewrite
[::] -> [::1] happened before passing control to cgroup-bpf block where
fl6.daddr was updated with passed by user sockaddr_in6.sin6_addr (that
might or might not be changed by BPF program). That way if user passed
[::] as dst IPv6 it was first rewritten with [::1] by original code from
876c7f41, but then rewritten back with [::] by cgroup-bpf block.

It happened even when BPF_CGROUP_UDP6_SENDMSG program was not present
(CONFIG_CGROUP_BPF=y was enough).

The fix is to apply BSD'ism after cgroup-bpf block so that [::] is
replaced with [::1] no matter where it came from: passed by user to
sys_sendmsg or set by BPF_CGROUP_UDP6_SENDMSG program.

Fixes: 1cedee13d2 ("bpf: Hooks for sys_sendmsg")
Reported-by: Nitin Rawat <nitin.rawat@intel.com>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-04 20:23:33 -08:00
David Ahern ec90ad3349 ipv6: Consider sk_bound_dev_if when binding a socket to a v4 mapped address
Similar to c5ee066333 ("ipv6: Consider sk_bound_dev_if when binding a
socket to an address"), binding a socket to v4 mapped addresses needs to
consider if the socket is bound to a device.

This problem also exists from the beginning of git history.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-04 17:18:58 -08:00
Eric Dumazet 8d93367045 ipv6: make icmp6_send() robust against null skb->dev
syzbot was able to crash one host with the following stack trace :

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 8625 Comm: syz-executor4 Not tainted 4.20.0+ #8
RIP: 0010:dev_net include/linux/netdevice.h:2169 [inline]
RIP: 0010:icmp6_send+0x116/0x2d30 net/ipv6/icmp.c:426
 icmpv6_send
 smack_socket_sock_rcv_skb
 security_sock_rcv_skb
 sk_filter_trim_cap
 __sk_receive_skb
 dccp_v6_do_rcv
 release_sock

This is because a RX packet found socket owned by user and
was stored into socket backlog. Before leaving RCU protected section,
skb->dev was cleared in __sk_receive_skb(). When socket backlog
was finally handled at release_sock() time, skb was fed to
smack_socket_sock_rcv_skb() then icmp6_send()

We could fix the bug in smack_socket_sock_rcv_skb(), or simply
make icmp6_send() more robust against such possibility.

In the future we might provide to icmp6_send() the net pointer
instead of infering it.

Fixes: d66a8acbda ("Smack: Inform peer that IPv6 traffic has been blocked")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Piotr Sawicki <p.sawicki2@partner.samsung.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-04 13:40:03 -08:00
Stefano Brivio 44039e0017 fou6: Prevent unbounded recursion in GUE error handler
I forgot to deal with IPv6 in commit 11789039da ("fou: Prevent unbounded
recursion in GUE error handler").

Now syzbot reported what might be the same type of issue, caused by
gue6_err(), that is, handling exceptions for direct UDP encapsulation in
GUE (UDP-in-UDP) leads to unbounded recursion in the GUE exception
handler.

As it probably doesn't make sense to set up GUE this way, and it's
currently not even possible to configure this, skip exception handling for
UDP (or UDP-Lite) packets encapsulated in UDP (or UDP-Lite) packets with
GUE on IPv6.

Reported-by: syzbot+4ad25edc7a33e4ab91e0@syzkaller.appspotmail.com
Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: b8a51b38e4 ("fou, fou6: ICMP error handlers for FoU and GUE")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-04 13:06:07 -08:00
Arthur Gautier 7c1e8a3817 netlink: fixup regression in RTM_GETADDR
This commit fixes a regression in AF_INET/RTM_GETADDR and
AF_INET6/RTM_GETADDR.

Before this commit, the kernel would stop dumping addresses once the first
skb was full and end the stream with NLMSG_DONE(-EMSGSIZE). The error
shouldn't be sent back to netlink_dump so the callback is kept alive. The
userspace is expected to call back with a new empty skb.

Changes from V1:
 - The error is not handled in netlink_dump anymore but rather in
   inet_dump_ifaddr and inet6_dump_addr directly as suggested by
   David Ahern.

Fixes: d7e38611b8 ("net/ipv4: Put target net when address dump fails due to bad attributes")
Fixes: 242afaa696 ("net/ipv6: Put target net when address dump fails due to bad attributes")

Cc: David Ahern <dsahern@gmail.com>
Cc: "David S . Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Arthur Gautier <baloo@gandi.net>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-04 12:47:06 -08:00
David Ahern c5ee066333 ipv6: Consider sk_bound_dev_if when binding a socket to an address
IPv6 does not consider if the socket is bound to a device when binding
to an address. The result is that a socket can be bound to eth0 and then
bound to the address of eth1. If the device is a VRF, the result is that
a socket can only be bound to an address in the default VRF.

Resolve by considering the device if sk_bound_dev_if is set.

This problem exists from the beginning of git history.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-02 20:16:37 -08:00
David Ahern 73155879b3 ipv6: Fix dump of specific table with strict checking
Dump of a specific table with strict checking enabled is looping. The
problem is that the end of the table dump is not marked in the cb. When
dumping a specific table, cb args 0 and 1 are not used (they are the hash
index and entry with an hash table index when dumping all tables). Re-use
args[0] to hold a 'done' flag for the specific table dump.

Fixes: 13e38901d4 ("net/ipv6: Plumb support for filtering route dumps")
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-02 20:15:43 -08:00
Stefano Brivio 7adf324609 ipv6: route: Fix return value of ip6_neigh_lookup() on neigh_create() error
In ip6_neigh_lookup(), we must not return errors coming from
neigh_create(): if creation of a neighbour entry fails, the lookup should
return NULL, in the same way as it's done in __neigh_lookup().

Otherwise, callers legitimately checking for a non-NULL return value of
the lookup function might dereference an invalid pointer.

For instance, on neighbour table overflow, ndisc_router_discovery()
crashes ndisc_update() by passing ERR_PTR(-ENOBUFS) as 'neigh' argument.

Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: f8a1b43b70 ("net/ipv6: Create a neigh_lookup for FIB entries")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-02 10:29:20 -08:00
Willem de Bruijn cb9f1b7838 ip: validate header length on virtual device xmit
KMSAN detected read beyond end of buffer in vti and sit devices when
passing truncated packets with PF_PACKET. The issue affects additional
ip tunnel devices.

Extend commit 76c0ddd8c3 ("ip6_tunnel: be careful when accessing the
inner header") and commit ccfec9e5cb ("ip_tunnel: be careful when
accessing the inner header").

Move the check to a separate helper and call at the start of each
ndo_start_xmit function in net/ipv4 and net/ipv6.

Minor changes:
- convert dev_kfree_skb to kfree_skb on error path,
  as dev_kfree_skb calls consume_skb which is not for error paths.
- use pskb_network_may_pull even though that is pedantic here,
  as the same as pskb_may_pull for devices without llheaders.
- do not cache ipv6 hdrs if used only once
  (unsafe across pskb_may_pull, was more relevant to earlier patch)

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01 12:05:02 -08:00
Su Yanjun 7f334a7e1a ipv6: fix typo in net/ipv6/reassembly.c
Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-30 13:02:46 -08:00
Christophe JAILLET 178fe94405 net/ipv6: Fix a test against 'ipv6_find_idev()' return value
'ipv6_find_idev()' returns NULL on error, not an error pointer.
Update the test accordingly and return -ENOBUFS, as already done in
'addrconf_add_dev()', if NULL is returned.

Fixes: ("ipv6: allow userspace to add IFA_F_OPTIMISTIC addresses")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-30 12:31:17 -08:00
Aditya Pakki f0fb9b288d ipv6/route: Add a missing check on proc_dointvec
While flushing the cache via  ipv6_sysctl_rtcache_flush(), the call
to proc_dointvec() may fail. The fix adds a check that returns the
error, on failure.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-27 16:18:03 -08:00
David S. Miller ce28bb4453 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2018-12-21 15:06:20 -08:00
Eric Dumazet cbb49697d5 ipv6: tunnels: fix two use-after-free
xfrm6_policy_check() might have re-allocated skb->head, we need
to reload ipv6 header pointer.

sysbot reported :

BUG: KASAN: use-after-free in __ipv6_addr_type+0x302/0x32f net/ipv6/addrconf_core.c:40
Read of size 4 at addr ffff888191b8cb70 by task syz-executor2/1304

CPU: 0 PID: 1304 Comm: syz-executor2 Not tainted 4.20.0-rc7+ #356
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x244/0x39d lib/dump_stack.c:113
 print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412
 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:432
 __ipv6_addr_type+0x302/0x32f net/ipv6/addrconf_core.c:40
 ipv6_addr_type include/net/ipv6.h:403 [inline]
 ip6_tnl_get_cap+0x27/0x190 net/ipv6/ip6_tunnel.c:727
 ip6_tnl_rcv_ctl+0xdb/0x2a0 net/ipv6/ip6_tunnel.c:757
 vti6_rcv+0x336/0x8f3 net/ipv6/ip6_vti.c:321
 xfrm6_ipcomp_rcv+0x1a5/0x3a0 net/ipv6/xfrm6_protocol.c:132
 ip6_protocol_deliver_rcu+0x372/0x1940 net/ipv6/ip6_input.c:394
 ip6_input_finish+0x84/0x170 net/ipv6/ip6_input.c:434
 NF_HOOK include/linux/netfilter.h:289 [inline]
 ip6_input+0xe9/0x600 net/ipv6/ip6_input.c:443
IPVS: ftp: loaded support on port[0] = 21
 ip6_mc_input+0x514/0x11c0 net/ipv6/ip6_input.c:537
 dst_input include/net/dst.h:450 [inline]
 ip6_rcv_finish+0x17a/0x330 net/ipv6/ip6_input.c:76
 NF_HOOK include/linux/netfilter.h:289 [inline]
 ipv6_rcv+0x115/0x640 net/ipv6/ip6_input.c:272
 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4973
 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5083
 process_backlog+0x24e/0x7a0 net/core/dev.c:5923
 napi_poll net/core/dev.c:6346 [inline]
 net_rx_action+0x7fa/0x19b0 net/core/dev.c:6412
 __do_softirq+0x308/0xb7e kernel/softirq.c:292
 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1027
 </IRQ>
 do_softirq.part.14+0x126/0x160 kernel/softirq.c:337
 do_softirq+0x19/0x20 kernel/softirq.c:340
 netif_rx_ni+0x521/0x860 net/core/dev.c:4569
 dev_loopback_xmit+0x287/0x8c0 net/core/dev.c:3576
 NF_HOOK include/linux/netfilter.h:289 [inline]
 ip6_finish_output2+0x193a/0x2930 net/ipv6/ip6_output.c:84
 ip6_fragment+0x2b06/0x3850 net/ipv6/ip6_output.c:727
 ip6_finish_output+0x6b7/0xc50 net/ipv6/ip6_output.c:152
 NF_HOOK_COND include/linux/netfilter.h:278 [inline]
 ip6_output+0x232/0x9d0 net/ipv6/ip6_output.c:171
 dst_output include/net/dst.h:444 [inline]
 ip6_local_out+0xc5/0x1b0 net/ipv6/output_core.c:176
 ip6_send_skb+0xbc/0x340 net/ipv6/ip6_output.c:1727
 ip6_push_pending_frames+0xc5/0xf0 net/ipv6/ip6_output.c:1747
 rawv6_push_pending_frames net/ipv6/raw.c:615 [inline]
 rawv6_sendmsg+0x3a3e/0x4b40 net/ipv6/raw.c:945
kobject: 'queues' (0000000089e6eea2): kobject_add_internal: parent: 'tunl0', set: '<NULL>'
kobject: 'queues' (0000000089e6eea2): kobject_uevent_env
 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798
kobject: 'queues' (0000000089e6eea2): kobject_uevent_env: filter function caused the event to drop!
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:631
 sock_write_iter+0x35e/0x5c0 net/socket.c:900
 call_write_iter include/linux/fs.h:1857 [inline]
 new_sync_write fs/read_write.c:474 [inline]
 __vfs_write+0x6b8/0x9f0 fs/read_write.c:487
kobject: 'rx-0' (00000000e2d902d9): kobject_add_internal: parent: 'queues', set: 'queues'
kobject: 'rx-0' (00000000e2d902d9): kobject_uevent_env
 vfs_write+0x1fc/0x560 fs/read_write.c:549
 ksys_write+0x101/0x260 fs/read_write.c:598
kobject: 'rx-0' (00000000e2d902d9): fill_kobj_path: path = '/devices/virtual/net/tunl0/queues/rx-0'
 __do_sys_write fs/read_write.c:610 [inline]
 __se_sys_write fs/read_write.c:607 [inline]
 __x64_sys_write+0x73/0xb0 fs/read_write.c:607
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
kobject: 'tx-0' (00000000443b70ac): kobject_add_internal: parent: 'queues', set: 'queues'
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457669
Code: fd b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f9bd200bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457669
RDX: 000000000000058f RSI: 00000000200033c0 RDI: 0000000000000003
kobject: 'tx-0' (00000000443b70ac): kobject_uevent_env
RBP: 000000000072bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9bd200c6d4
R13: 00000000004c2dcc R14: 00000000004da398 R15: 00000000ffffffff

Allocated by task 1304:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
 __do_kmalloc_node mm/slab.c:3684 [inline]
 __kmalloc_node_track_caller+0x50/0x70 mm/slab.c:3698
 __kmalloc_reserve.isra.41+0x41/0xe0 net/core/skbuff.c:140
 __alloc_skb+0x155/0x760 net/core/skbuff.c:208
kobject: 'tx-0' (00000000443b70ac): fill_kobj_path: path = '/devices/virtual/net/tunl0/queues/tx-0'
 alloc_skb include/linux/skbuff.h:1011 [inline]
 __ip6_append_data.isra.49+0x2f1a/0x3f50 net/ipv6/ip6_output.c:1450
 ip6_append_data+0x1bc/0x2d0 net/ipv6/ip6_output.c:1619
 rawv6_sendmsg+0x15ab/0x4b40 net/ipv6/raw.c:938
 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:631
 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2116
 __sys_sendmsg+0x11d/0x280 net/socket.c:2154
 __do_sys_sendmsg net/socket.c:2163 [inline]
 __se_sys_sendmsg net/socket.c:2161 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2161
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
kobject: 'gre0' (00000000cb1b2d7b): kobject_add_internal: parent: 'net', set: 'devices'

Freed by task 1304:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
 __cache_free mm/slab.c:3498 [inline]
 kfree+0xcf/0x230 mm/slab.c:3817
 skb_free_head+0x93/0xb0 net/core/skbuff.c:553
 pskb_expand_head+0x3b2/0x10d0 net/core/skbuff.c:1498
 __pskb_pull_tail+0x156/0x18a0 net/core/skbuff.c:1896
 pskb_may_pull include/linux/skbuff.h:2188 [inline]
 _decode_session6+0xd11/0x14d0 net/ipv6/xfrm6_policy.c:150
 __xfrm_decode_session+0x71/0x140 net/xfrm/xfrm_policy.c:3272
kobject: 'gre0' (00000000cb1b2d7b): kobject_uevent_env
 __xfrm_policy_check+0x380/0x2c40 net/xfrm/xfrm_policy.c:3322
 __xfrm_policy_check2 include/net/xfrm.h:1170 [inline]
 xfrm_policy_check include/net/xfrm.h:1175 [inline]
 xfrm6_policy_check include/net/xfrm.h:1185 [inline]
 vti6_rcv+0x4bd/0x8f3 net/ipv6/ip6_vti.c:316
 xfrm6_ipcomp_rcv+0x1a5/0x3a0 net/ipv6/xfrm6_protocol.c:132
 ip6_protocol_deliver_rcu+0x372/0x1940 net/ipv6/ip6_input.c:394
 ip6_input_finish+0x84/0x170 net/ipv6/ip6_input.c:434
 NF_HOOK include/linux/netfilter.h:289 [inline]
 ip6_input+0xe9/0x600 net/ipv6/ip6_input.c:443
 ip6_mc_input+0x514/0x11c0 net/ipv6/ip6_input.c:537
 dst_input include/net/dst.h:450 [inline]
 ip6_rcv_finish+0x17a/0x330 net/ipv6/ip6_input.c:76
 NF_HOOK include/linux/netfilter.h:289 [inline]
 ipv6_rcv+0x115/0x640 net/ipv6/ip6_input.c:272
 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4973
 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5083
 process_backlog+0x24e/0x7a0 net/core/dev.c:5923
kobject: 'gre0' (00000000cb1b2d7b): fill_kobj_path: path = '/devices/virtual/net/gre0'
 napi_poll net/core/dev.c:6346 [inline]
 net_rx_action+0x7fa/0x19b0 net/core/dev.c:6412
 __do_softirq+0x308/0xb7e kernel/softirq.c:292

The buggy address belongs to the object at ffff888191b8cac0
 which belongs to the cache kmalloc-512 of size 512
The buggy address is located 176 bytes inside of
 512-byte region [ffff888191b8cac0, ffff888191b8ccc0)
The buggy address belongs to the page:
page:ffffea000646e300 count:1 mapcount:0 mapping:ffff8881da800940 index:0x0
flags: 0x2fffc0000000200(slab)
raw: 02fffc0000000200 ffffea0006eaaa48 ffffea00065356c8 ffff8881da800940
raw: 0000000000000000 ffff888191b8c0c0 0000000100000006 0000000000000000
page dumped because: kasan: bad access detected
kobject: 'queues' (000000005fd6226e): kobject_add_internal: parent: 'gre0', set: '<NULL>'

Memory state around the buggy address:
 ffff888191b8ca00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff888191b8ca80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
>ffff888191b8cb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                             ^
 ffff888191b8cb80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888191b8cc00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: 0d3c703a9d ("ipv6: Cleanup IPv6 tunnel receive path")
Fixes: ed1efb2aef ("ipv6: Add support for IPsec virtual tunnel interfaces")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21 09:18:31 -08:00
David S. Miller c3e5336925 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next:

1) Support for destination MAC in ipset, from Stefano Brivio.

2) Disallow all-zeroes MAC address in ipset, also from Stefano.

3) Add IPSET_CMD_GET_BYNAME and IPSET_CMD_GET_BYINDEX commands,
   introduce protocol version number 7, from Jozsef Kadlecsik.
   A follow up patch to fix ip_set_byindex() is also included
   in this batch.

4) Honor CTA_MARK_MASK from ctnetlink, from Andreas Jaggi.

5) Statify nf_flow_table_iterate(), from Taehee Yoo.

6) Use nf_flow_table_iterate() to simplify garbage collection in
   nf_flow_table logic, also from Taehee Yoo.

7) Don't use _bh variants of call_rcu(), rcu_barrier() and
   synchronize_rcu_bh() in Netfilter, from Paul E. McKenney.

8) Remove NFC_* cache definition from the old caching
   infrastructure.

9) Remove layer 4 port rover in NAT helpers, use random port
   instead, from Florian Westphal.

10) Use strscpy() in ipset, from Qian Cai.

11) Remove NF_NAT_RANGE_PROTO_RANDOM_FULLY branch now that
    random port is allocated by default, from Xiaozhou Liu.

12) Ignore NF_NAT_RANGE_PROTO_RANDOM too, from Florian Westphal.

13) Limit port allocation selection routine in NAT to avoid
    softlockup splats when most ports are in use, from Florian.

14) Remove unused parameters in nf_ct_l4proto_unregister_sysctl()
    from Yafang Shao.

15) Direct call to nf_nat_l4proto_unique_tuple() instead of
    indirection, from Florian Westphal.

16) Several patches to remove all layer 4 NAT indirections,
    remove nf_nat_l4proto struct, from Florian Westphal.

17) Fix RTP/RTCP source port translation when SNAT is in place,
    from Alin Nastac.

18) Selective rule dump per chain, from Phil Sutter.

19) Revisit CLUSTERIP target, this includes a deadlock fix from
    netns path, sleep in atomic, remove bogus WARN_ON_ONCE()
    and disallow mismatching IP address and MAC address.
    Patchset from Taehee Yoo.

20) Update UDP timeout to stream after 2 seconds, from Florian.

21) Shrink UDP established timeout to 120 seconds like TCP timewait.

22) Sysctl knobs to set GRE timeouts, from Yafang Shao.

23) Move seq_print_acct() to conntrack core file, from Florian.

24) Add enum for conntrack sysctl knobs, also from Florian.

25) Place nf_conntrack_acct, nf_conntrack_helper, nf_conntrack_events
    and nf_conntrack_timestamp knobs in the core, from Florian Westphal.
    As a side effect, shrink netns_ct structure by removing obsolete
    sysctl anchors, also from Florian.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20 18:20:26 -08:00
Herbert Xu d15f5ac8de ipv6: frags: Fix bogus skb->sk in reassembled packets
It was reported that IPsec would crash when it encounters an IPv6
reassembled packet because skb->sk is non-zero and not a valid
pointer.

This is because skb->sk is now a union with ip_defrag_offset.

This patch fixes this by resetting skb->sk when exiting from
the reassembly code.

Reported-by: Xiumei Mu <xmu@redhat.com>
Fixes: 219badfaad ("ipv6: frags: get rid of ip6frag_skb_cb/...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20 16:31:36 -08:00
David S. Miller 2be09de7d6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.

Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20 11:53:36 -08:00
David S. Miller ac68a3d3c3 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2018-12-20

Two last patches for this release cycle:

1) Remove an unused variable in xfrm_policy_lookup_bytype().
   From YueHaibing.

2) Fix possible infinite loop in __xfrm6_tunnel_alloc_spi().
   Also from YueHaibing.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20 08:21:47 -08:00
Cong Wang fb24274546 ipv6: explicitly initialize udp6_addr in udp_sock_create6()
syzbot reported the use of uninitialized udp6_addr::sin6_scope_id.
We can just set ::sin6_scope_id to zero, as tunnels are unlikely
to use an IPv6 address that needs a scope id and there is no
interface to bind in this context.

For net-next, it looks different as we have cfg->bind_ifindex there
so we can probably call ipv6_iface_scope_id().

Same for ::sin6_flowinfo, tunnels don't use it.

Fixes: 8024e02879 ("udp: Add udp_sock_create for UDP tunnels to open listener socket")
Reported-by: syzbot+c56449ed3652e6720f30@syzkaller.appspotmail.com
Cc: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 12:09:00 -08:00
Florian Westphal 2294be0f11 net: use skb_sec_path helper in more places
skb_sec_path gains 'const' qualifier to avoid
xt_policy.c: 'skb_sec_path' discards 'const' qualifier from pointer target type

same reasoning as previous conversions: Won't need to touch these
spots anymore when skb->sp is removed.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 11:21:37 -08:00
Florian Westphal 0ca64da128 xfrm: change secpath_set to return secpath struct, not error value
It can only return 0 (success) or -ENOMEM.
Change return value to a pointer to secpath struct.

This avoids direct access to skb->sp:

err = secpath_set(skb);
if (!err) ..
skb->sp-> ...

Becomes:
sp = secpath_set(skb)
if (!sp) ..
sp-> ..

This reduces noise in followup patch which is going to remove skb->sp.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 11:21:37 -08:00
Florian Westphal df5042f4c5 sk_buff: add skb extension infrastructure
This adds an optional extension infrastructure, with ispec (xfrm) and
bridge netfilter as first users.
objdiff shows no changes if kernel is built without xfrm and br_netfilter
support.

The third (planned future) user is Multipath TCP which is still
out-of-tree.
MPTCP needs to map logical mptcp sequence numbers to the tcp sequence
numbers used by individual subflows.

This DSS mapping is read/written from tcp option space on receive and
written to tcp option space on transmitted tcp packets that are part of
and MPTCP connection.

Extending skb_shared_info or adding a private data field to skb fclones
doesn't work for incoming skb, so a different DSS propagation method would
be required for the receive side.

mptcp has same requirements as secpath/bridge netfilter:

1. extension memory is released when the sk_buff is free'd.
2. data is shared after cloning an skb (clone inherits extension)
3. adding extension to an skb will COW the extension buffer if needed.

The "MPTCP upstreaming" effort adds SKB_EXT_MPTCP extension to store the
mapping for tx and rx processing.

Two new members are added to sk_buff:
1. 'active_extensions' byte (filling a hole), telling which extensions
   are available for this skb.
   This has two purposes.
   a) avoids the need to initialize the pointer.
   b) allows to "delete" an extension by clearing its bit
   value in ->active_extensions.

   While it would be possible to store the active_extensions byte
   in the extension struct instead of sk_buff, there is one problem
   with this:
    When an extension has to be disabled, we can always clear the
    bit in skb->active_extensions.  But in case it would be stored in the
    extension buffer itself, we might have to COW it first, if
    we are dealing with a cloned skb.  On kmalloc failure we would
    be unable to turn an extension off.

2. extension pointer, located at the end of the sk_buff.
   If the active_extensions byte is 0, the pointer is undefined,
   it is not initialized on skb allocation.

This adds extra code to skb clone and free paths (to deal with
refcount/free of extension area) but this replaces similar code that
manages skb->nf_bridge and skb->sp structs in the followup patches of
the series.

It is possible to add support for extensions that are not preseved on
clones/copies.

To do this, it would be needed to define a bitmask of all extensions that
need copy/cow semantics, and change __skb_ext_copy() to check
->active_extensions & SKB_EXT_PRESERVE_ON_CLONE, then just set
->active_extensions to 0 on the new clone.

This isn't done here because all extensions that get added here
need the copy/cow semantics.

v2:
Allocate entire extension space using kmem_cache.
Upside is that this allows better tracking of used memory,
downside is that we will allocate more space than strictly needed in
most cases (its unlikely that all extensions are active/needed at same
time for same skb).
The allocated memory (except the small extension header) is not cleared,
so no additonal overhead aside from memory usage.

Avoid atomic_dec_and_test operation on skb_ext_put()
by using similar trick as kfree_skbmem() does with fclone_ref:
If recount is 1, there is no concurrent user and we can free right away.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 11:21:37 -08:00
Florian Westphal c4b0e771f9 netfilter: avoid using skb->nf_bridge directly
This pointer is going to be removed soon, so use the existing helpers in
more places to avoid noise when the removal happens.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 11:21:37 -08:00
YueHaibing fa89a4593b xfrm6_tunnel: Fix spi check in __xfrm6_tunnel_alloc_spi
gcc warn this:

net/ipv6/xfrm6_tunnel.c:143 __xfrm6_tunnel_alloc_spi() warn:
 always true condition '(spi <= 4294967295) => (0-u32max <= u32max)'

'spi' is u32, which always not greater than XFRM6_TUNNEL_SPI_MAX
because of wrap around. So the second forloop will never reach.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-12-19 12:33:17 +01:00
David S. Miller 77c7a7b3e7 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2018-12-18

1) Add xfrm policy selftest scripts.
   From Florian Westphal.

2) Split inexact policies into four different search list
   classes and use the rbtree infrastructure to store/lookup
   the policies. This is to improve the policy lookup
   performance after the flowcache removal.
   Patches from Florian Westphal.

3) Various coding style fixes, from Colin Ian King.

4) Fix policy lookup logic after adding the inexact policy
   search tree infrastructure. From Florian Westphal.

5) Remove a useless remove BUG_ON from xfrm6_dst_ifdown.
   From Li RongQing.

6) Use the correct policy direction for lookups on hash
   rebuilding. From Florian Westphal.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 08:49:48 -08:00
David Ahern f5c6dfdefb ip6mr: Drop mfc6_cache argument to ip6mr_forward2
mfc6_cache is not needed by ip6mr_forward2 so drop it from the input
argument list.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-17 23:31:14 -08:00
Willem de Bruijn 8f932f762e net: add missing SOF_TIMESTAMPING_OPT_ID support
SOF_TIMESTAMPING_OPT_ID is supported on TCP, UDP and RAW sockets.
But it was missing on RAW with IPPROTO_IP, PF_PACKET and CAN.

Add skb_setup_tx_timestamp that configures both tx_flags and tskey
for these paths that do not need corking or use bytestream keys.

Fixes: 09c2d251b7 ("net-timestamp: add key to disambiguate concurrent datagrams")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-17 23:27:00 -08:00
Willem de Bruijn fbfb2321e9 ipv6: add missing tx timestamping on IPPROTO_RAW
Raw sockets support tx timestamping, but one case is missing.

IPPROTO_RAW takes a separate packet construction path. raw_send_hdrinc
has an explicit call to sock_tx_timestamp, but rawv6_send_hdrinc does
not. Add it.

Fixes: 11878b40ed ("net-timestamp: SOCK_RAW and PING timestamping")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-17 23:27:00 -08:00
Florian Westphal 5cbabeec1e netfilter: nat: remove nf_nat_l4proto struct
This removes the (now empty) nf_nat_l4proto struct, all its instances
and all the no longer needed runtime (un)register functionality.

nf_nat_need_gre() can be axed as well: the module that calls it (to
load the no-longer-existing nat_gre module) also calls other nat core
functions. GRE nat is now always available if kernel is built with it.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-17 23:33:31 +01:00
Florian Westphal faec18dbb0 netfilter: nat: remove l4proto->manip_pkt
This removes the last l4proto indirection, the two callers, the l3proto
packet mangling helpers for ipv4 and ipv6, now call the
nf_nat_l4proto_manip_pkt() helper.

nf_nat_proto_{dccp,tcp,sctp,gre,icmp,icmpv6} are left behind, even though
they contain no functionality anymore to not clutter this patch.

Next patch will remove the empty files and the nf_nat_l4proto
struct.

nf_nat_proto_udp.c is renamed to nf_nat_proto.c, as it now contains the
other nat manip functionality as well, not just udp and udplite.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-17 23:33:29 +01:00
Florian Westphal 76b90019e0 netfilter: nat: remove l4proto->nlattr_to_range
all protocols did set this to nf_nat_l4proto_nlattr_to_range, so
just call it directly.

The important difference is that we'll now also call it for
protocols that we don't support (i.e., nf_nat_proto_unknown did
not provide .nlattr_to_range).

However, there should be no harm, even icmp provided this callback.
If we don't implement a specific l4nat for this, nothing would make
use of this information, so adding a big switch/case construct listing
all supported l4protocols seems a bit pointless.

This change leaves a single function pointer in the l4proto struct.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-17 23:33:23 +01:00
Florian Westphal fe2d002099 netfilter: nat: remove l4proto->in_range
With exception of icmp, all of the l4 nat protocols set this to
nf_nat_l4proto_in_range.

Get rid of this and just check the l4proto in the caller.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-17 23:33:14 +01:00
Florian Westphal 40e786bd29 netfilter: nat: fold in_range indirection into caller
No need for indirections here, we only support ipv4 and ipv6
and the called functions are very small.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-17 23:33:09 +01:00
Florian Westphal 203f2e7820 netfilter: nat: remove l4proto->unique_tuple
fold remaining users (icmp, icmpv6, gre) into nf_nat_l4proto_unique_tuple.
The static-save of old incarnation of resolved key in gre and icmp is
removed as well, just use the prandom based offset like the others.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-17 23:33:04 +01:00