Commit Graph

1296 Commits

Author SHA1 Message Date
Eric Miao 09a5358d1e [ARM] pxa: move pmu device back into mach-pxa/
Not tested and enabled on MMP at this moment, and since the IRQ
is different from mach-pxa, I'd prefer to move the PMU device
back into mach-pxa/. Will introduce the PMU device to MMP once
it's enabled and tested.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05 14:32:19 +08:00
Igor Grinberg 1b84387ac1 [ARM] pxa/cm-x300: enable the IRQ_WAKEUP0 as wakeup source.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05 14:32:18 +08:00
Igor Grinberg 1288209651 [ARM] pxa: add set_type to the pxa3xx ext_wakeup irq chip.
pxa3xx cpu needs the irq type setup to be able to
wakeup from low power mode on IRQ_WAKEUPx events.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05 14:32:17 +08:00
Jonathan Cameron dcd925f951 [ARM] pxa: merge stargate2 and imote2 board files
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05 14:32:16 +08:00
Marek Vasut 241cf47311 [ARM] pxa: fix all devices using wm97xx_batt.h
This file is scheduled for removal, therefore fix all devices that use this
file to use the suggested wm97xx.h and pass platform data properly.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Tomas Cech <sleep_walker@suse.cz>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05 14:32:14 +08:00
Russell King b31fc7af78 Merge branches 'at91', 'ep93xx', 'kexec', 'iop', 'lmb', 'nomadik', 'nuc', 'pl', 'spear' and 'versatile' into devel 2010-07-31 14:19:35 +01:00
Russell King 8d717a52d1 ARM: Convert platform reservations to use LMB rather than bootmem
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27 08:48:23 +01:00
Russell King 98c672cf1f ARM: Move platform memory reservations out of generic code
Move the platform specific bootmem memory reservations out of
arch/arm/mm/mmu.c into their respective platform files.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-16 11:06:40 +01:00
Russell King b65b4781fb ARM: Remove 'node' argument form arch_adjust_zones()
Since we no longer support discontigmem, node is always zero, so
remove this argument.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-16 10:57:36 +01:00
Russell King be37030274 ARM: Remove DISCONTIGMEM support
Everything should now be using sparsemem rather than discontigmem, so
remove the code supporting discontigmem from ARM.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-16 10:57:35 +01:00
pieterg 7fad69861d [ARM] pxa/colibri-pxa300: fix AC97 init
The wrong CONFIG defines were checked, and the <mach/audio.h>
include was missing

Signed-off-by: pieter <p.grimmerink@inepro.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-07-13 16:09:07 +08:00
Eric Miao 5e16e3cb83 [ARM] pxa: fix incorrect order of AC97 reset pin configs
Reported-by: Dylan Cristiani <d.cristiani@idem-tech.it>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-07-13 16:09:06 +08:00
Marek Vasut 3d3d0fbf4d [ARM] pxa: cpufreq-pxa2xx: fix DRI recomputation routine
This patch:
1) Simpifies the DRI recomputation routine by pulling out the common code
2) Fixes a bug in PXA27x DRI recomputation caused by incorrect parenthesis

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-07-13 16:09:06 +08:00
Eric Miao 76d61e4ee0 [ARM] pxa/corgi: fix MMC/SD card detection failure
Reported-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-07-13 16:09:06 +08:00
Marek Vasut 8499ded859 [ARM] pxa/z2: Register WM8750
This patch registers the WM8750 codec on a proper place on the ZipitZ2
machine after the WM8750 driver was converted to new API.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-18 15:07:35 +08:00
Marek Vasut d198290d82 [ARM] pxa/z2: Add battery support into Zipit Z2
This patch adds support for the AER915 battery chip into Zipit Z2
platform file.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-18 15:07:35 +08:00
Daniel Mack 9ceb4c99f3 [ARM] pxa/raumfeld: Check charge state after resume
Use the resume callback of the pda_power supply framework to check for a
'charge finished' event that might have occured during the sleep phase.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-18 15:07:35 +08:00
Marek Vasut 403d29713e [ARM] pxa/income: Add Income SBC support
This is support for custom design based on Toradex Colibri PXA270 CPU card.
Initial patch was by Pavel Revak.

[daniel - rebased the code to follow the module/board split]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Pavel Revak <palo@bielyvlk.sk>
Cc: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-18 15:07:34 +08:00
Daniel Mack 4c243c8584 [ARM] pxa/colibri270: Split module and base board code
Follow the idea of several MX31 based boards and split code that is
related to the module from code that is baseboard specific. This makes
adding new base board support easier, while avoiding code duplication.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-18 15:07:34 +08:00
Marek Vasut 7cca84abf4 [ARM] pxa/colibri270: Add TSC support
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-18 15:07:34 +08:00
Marek Vasut 8f146191b8 [ARM] pxa/colibri270: Add UHC support
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-18 15:07:34 +08:00
Marek Vasut 12d94208db [ARM] pxa/colibri270: Add FFUART MFP
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-18 15:07:34 +08:00
Marek Vasut d01b8d6494 [ARM] pxa/colibri270: Add MMC support
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-18 15:07:33 +08:00
Marek Vasut f95bb54016 [ARM] pxa/colibri270: Refactor board definition file
This patch just moves code around and polishes it. Also, compile in only
selected pieces of hardware.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-18 15:07:33 +08:00
Marek Vasut 97dbc5164a [ARM] pxa/vpac270: Add VGA modes for ADV7125
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-18 15:07:33 +08:00
Marek Vasut 54e70bffd8 [ARM] pxa/vpac270: Add PMIC support
This patch adds support for the MAX1587A used on Voipac PXA270 board.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-18 15:07:33 +08:00
Marek Vasut 9b2dbdc7c9 [ARM] pxa/vpac270: Convert to use PATA PXA driver
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-18 15:07:32 +08:00
Marek Vasut 2dc6c6f15d [ARM] pata_pxa: DMA-capable PATA driver
This patch adds a driver for a harddrive attached to PXA address and data bus.
Unlike pata_platform, this driver allows usage of PXA DMA controller, making the
transmission speed 3x higher.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-18 15:07:32 +08:00
Eric Miao 406c86f11f [ARM] pxa/corgi: fix MMC/SD card detection failure
Reported-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-14 18:15:24 +08:00
Robert Jarzmik 8dbed71ad1 [ARM] pxa/mioa701: fix camera regression
Since commit a48c24a696, the
camera is not working anymore.

After the v4l2 migration, the mt9m111 camera board
information was not passed to the i2c layer anymore, but
stored for future use of v4l2 (through soc_camera).

Because mioa701_i2c_devices[] was tagged as "__initdata",
and because after the v4l2 migration, the new structure
"iclink" references it, the mt9m111 driver is not probed
anymore, as part of "iclink" is not valid (discarded after
kernel init).

Although there is not compilation error, nor runtime oops,
this patch restores a working camera on the mioa701 board.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-13 23:55:15 +08:00
Marek Vasut 60adc112bb [ARM] pxa/z2: fix flash layout to final version
This patch fixes flash layout to it's final version. Also, I fixed the
authorship information of this file as it's been totally reworked since Ken
released his last version.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-13 23:55:14 +08:00
Marek Vasut d30e5d897c [ARM] pxa/spitz: Correctly register WM8750
This patch registers the WM8750 codec on a proper place on the SPITZ machine
after the WM8750 driver was converted to new API.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-31 12:03:45 +08:00
Tobias Klauser 600ae40df7 [ARM] pxa/palmtc: storage class should be before const qualifier
The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-31 12:03:44 +08:00
Linus Torvalds f8965467f3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits)
  qlcnic: adding co maintainer
  ixgbe: add support for active DA cables
  ixgbe: dcb, do not tag tc_prio_control frames
  ixgbe: fix ixgbe_tx_is_paused logic
  ixgbe: always enable vlan strip/insert when DCB is enabled
  ixgbe: remove some redundant code in setting FCoE FIP filter
  ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp
  ixgbe: fix header len when unsplit packet overflows to data buffer
  ipv6: Never schedule DAD timer on dead address
  ipv6: Use POSTDAD state
  ipv6: Use state_lock to protect ifa state
  ipv6: Replace inet6_ifaddr->dead with state
  cxgb4: notify upper drivers if the device is already up when they load
  cxgb4: keep interrupts available when the ports are brought down
  cxgb4: fix initial addition of MAC address
  cnic: Return SPQ credit to bnx2x after ring setup and shutdown.
  cnic: Convert cnic_local_flags to atomic ops.
  can: Fix SJA1000 command register writes on SMP systems
  bridge: fix build for CONFIG_SYSFS disabled
  ARCNET: Limit com20020 PCI ID matches for SOHARD cards
  ...

Fix up various conflicts with pcmcia tree drivers/net/
{pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and
wireless/orinoco/spectrum_cs.c} and feature removal
(Documentation/feature-removal-schedule.txt).

Also fix a non-content conflict due to pm_qos_requirement getting
renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
2010-05-20 21:04:44 -07:00
David S. Miller 278554bd65 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/net/wireless/ath/ar9170/usb.c
	drivers/scsi/iscsi_tcp.c
	net/ipv4/ipmr.c
2010-05-12 00:05:35 -07:00
Eric Miao f97cab28b1 [ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
delay_detect in HZ is confusing, convert it to be millisecond based. And
thus remove those unnecessary call to msecs_to_jiffies() at runtime for
this field. Other constants are converted assuming HZ == 100, which are
basically true for those platforms.

The assignment in csb726.c was incorrect, and is fixed in this patch as
a result.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Marc Zyngier <maz@misterjones.org>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Daniel Mack <daniel@caiaq.de>
2010-05-11 17:25:04 +02:00
Marek Vasut fb25cb3309 [ARM] pxa/vpac270: fix now invalid bit of UP2OCR
This patch removes write to UP2OCR[DMSTATE] (ex-UP2OCR_DPPUBE) which is invalid
on PXA270C5 and later.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:04 +02:00
Marek Vasut bcc399bb49 [ARM] pxa/vpac270: add OneNAND support
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:04 +02:00
Marek Vasut aeec134688 [ARM] pxa/vpac270: remove TS_IRQ magic number
The touchscreen GPIO IRQ was used as a magic number. Define it properly in the
board header file. This is a simple cleanup patch.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:03 +02:00
Marek Vasut 052345aec0 [ARM] pxa/vpac270: add ide support
This patch adds support for the on-board IDE channel. I tested this with a CDROM
connected over 2.5-3.5 IDE reduction with external power supplied to the CDROM.
This was not tested with the Voipac 270-HDD-000 (official Voipac HDD module),
but I expect no problems.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:03 +02:00
Marek Vasut 83a4a10226 [ARM] pxa/vpac270: Add DS1339 RTC support
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:03 +02:00
Marek Vasut 1a8fb70e48 [ARM] pxa/vpac270: Add touchscreen support
This adds support for the UCB1400 touchscreen found in the VPAC270 device.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:03 +02:00
Marek Vasut 947fb57e3a [ARM] pxa/vpac270: add ethernet support
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:03 +02:00
Marek Vasut 3d98f8816a [ARM] pxa/vpac270: UDC and UHC support
NOTE:
I wasn't able to get it running without reseting the HXOE (so it's there based
on my tests with the hardware). I'll have to investigate it properly when I have
more time.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:03 +02:00
Marek Vasut addff0faec [ARM] pxa: add support for Voipac PXA270 PCMCIA
PCMCIA support for Voipac PXA270

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:02 +02:00
Marek 543cd84255 [ARM] pxa: add basic support for Voipac PXA270 SBC
This patch adds basic support for the Voipac PXA270 SBC.
The device consists of the following hardware:
- PXA270 @ 520 MHz
- 256MB RAM (sparsemem, 2*128MB regions)
- 64MB NOR flash
- 640x480 LCD
- Ports: 2xUHC, 1xUDC, 1xPCMCIA, VGA, FFUART, 2xPS2, Speaker, MIC

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:02 +02:00
Marek Vasut b637799248 [ARM] pxa: add basic support for the Aeronix Zipit Z2 handheld
This patch adds support for the Zipit Z2. The parts missing from this
patch are the battery support, SPI driver for the LCD and support for
the Silicon Serial ID chip.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:02 +02:00
Igor Grinberg 8188097523 [ARM] pxa/cm-x300: update the memory fixup.
CM-X300 bootloader passes DRAM configuration information in ATAGS,
however, the first memory bank is reported at actual physical address 0x8000000.
Use the configuration information supplied by the bootloader and
cope with the necessity to have PHYS_ADDR=0xa0000000.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:02 +02:00
Igor Grinberg d176d64b54 [ARM] pxa/cm-x300: add regulator on vcc_core
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:02 +02:00
Igor Grinberg e4e309708e [ARM] pxa/cm-x300: fix da903x IRQ line assignment
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:01 +02:00
Igor Grinberg d768c67c0c [ARM] pxa/cm-x300: da903x WLED is not connected on cm-x300
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:01 +02:00
Igor Grinberg 03ba7e07f5 [ARM] pxa/cm-x300.c: add battery charger support
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:01 +02:00
Eric Miao b1d9bf1d98 [ARM] pxa: remove pxa_gpio_mode() and files
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:01 +02:00
Eric Miao cb8f3c7dea [ARM] pxa/tosa: move CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES to mach/Kconfig
Tosa is now able to use generic matrix keypad driver instead of the deprecated
tosakbd.c, where CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES is still useful.  Move
it to mach/Kconfig.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:00 +02:00
Eric Miao cb432b358d [ARM] pxa/corgi: cleanup GPIO configurations and low power mode settings
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:00 +02:00
Eric Miao e63f591a8c [ARM] pxa/corgi: use generic GPIO API and remove pxa_gpio_mode()
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:00 +02:00
Eric Miao b6eede1126 [ARM] pxa/spitz: use generic GPIO API and remove pxa_gpio_mode()
REVISIT: change to GPIO18 is ugly, need to make sure whether that's
really necessary - GPIO18_RDY as an VLIO input signal - we don't
normally need to do such kind of trick during low power mode.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:00 +02:00
Eric Miao 1fe8c2bcad [ARM] pxa: allow MFP_LPM_INPUT to be explicitly specified
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:00 +02:00
Eric Miao c09f431c33 [ARM] pxa: allow keypad GPIOs to wakeup when configured as generic
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:00 +02:00
Eric Miao 1106143d7a [ARM] pxa: add MFP_LPM_KEEP_OUTPUT flag to pin config
Some pins are expected to keep their last level during suspend, and
introduce MFP_LPM_KEEP_OUTPUT for this.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:24:59 +02:00
Eric Miao 866d091dcb [ARM] pxa: remove incorrect select PXA_SSP in Kconfig
PXA_SSP is actually used by drivers like drivers/spi/pxa2xx_spi.c and
sound/soc/pxa/pxa-ssp.c, not by boards. Remove those incorrect 'select'
from Kconfig and make SOC_PXA_SSP to select.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:24:58 +02:00
Haojian Zhuang 54c39b420f [ARM] pxa: move ssp into common plat-pxa
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:24:58 +02:00
Eric Miao be1194cca5 [ARM] pxa: remove unnecessary #include of <mach/ssp.h>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:24:58 +02:00
Eric Miao 83f2889643 [ARM] pxa: merge regs-ssp.h into ssp.h
No need to separate them as they should be together from the begining.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:24:58 +02:00
Eric Miao c9840daa70 [ARM] pxa: correct SSCR0_SCR to support multiple SoCs
The previous definitions of SSCR0_SCR and SSCR0_SerClkDiv() prevented
them being used simultaneously when supporting multiple PXA SoCs, esp.
in drivers/spi/pxa2xx_spi.c, make them correct.

The change from SSCR0_SerClkDiv(2) to SSCR0_SCR(2), will make the result
a little bit different in pxa2xx_spi_probe(), however, since that's only
used as a default initialization value, it's acceptable.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:24:57 +02:00
Eric Miao 793ffb9ed3 [ARM] pxa: remove the now legacy SSP API
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:24:57 +02:00
Eric Miao 639b91a364 [ARM] pxa: remove now un-used corgi_ssp.c and corgi_lcd.c
The only use of corgi_ssp.c is corgi_ts.c, which is now deprecated
and removed. Remove corgi_ssp.c and corgi_lcd.c and their relevant
function declarations and data structures.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Pavel Machek <pavel@ucw.cz>
2010-05-11 17:24:57 +02:00
Jakob Viketoft ccb8d8d070 [ARM] pxa/colibri: fix missing #include <mach/mfp.h> in colibri.h
The use of mfp_cfg_t causes build errors without including <mach/mfp.h>.

CC: stable@kernel.org
CC: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Jakob Viketoft <jakob.viketoft@bitsim.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06 11:12:12 +08:00
Pavel Machek b53f771061 [ARM] pxa/spitz: fix On/off key name to fix warning during boot
On/Off contains slash in the name, which causes warning during boot.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06 11:12:11 +08:00
Haojian Zhuang 5d2fec5df1 [ARM] pxa: fix the incorrect cpu_is_pxa950()
Fix the wrong variable used in cpu_is_pxa950().

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06 11:12:11 +08:00
Wolfram Sang 6ae87fe219 [ARM] pxa/viper: fix timeout usage for I2C
The timeout value is in jiffies, so it should be using HZ, not a plain
number. Assume with HZ=100 '100' means 1s here and adapt accordingly.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Marc Zyngier <maz@misterjones.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Shen <paul.shen@marvell.com>
Cc: Mike Rapoport <mike@compulab.co.il>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06 11:12:11 +08:00
Daniel Mack 299ed07868 [ARM] pxa/raumfeld: fix button name
"on/off button" was recently renamed to remove the slash character.
Follow that change in the pin polarity detection as well.

While at it, fix another cosmetic coding style flaw as well.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06 11:12:11 +08:00
Igor Grinberg d5df767dbe [ARM] pxa: add missing new line to regs-u2d.h
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06 11:12:10 +08:00
David S. Miller 871039f02f Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/stmmac/stmmac_main.c
	drivers/net/wireless/wl12xx/wl1271_cmd.c
	drivers/net/wireless/wl12xx/wl1271_main.c
	drivers/net/wireless/wl12xx/wl1271_spi.c
	net/core/ethtool.c
	net/mac80211/scan.c
2010-04-11 14:53:53 -07:00
Marc Zyngier e446630c96 Add hotplug support to mcp251x driver
Chip model can now be selected directly by matching the modalias name
(instead of filling the .model field in platform_data), and allows the
module to be auto-loaded. Previous behaviour is of course still supported.

Convert the two in-tree users to this feature (icontrol & zeus).
Tested on an Zeus platform (mcp2515).

Signed-off-by: Marc Zyngier <maz@misterjones.org>
Acked-by: Christian Pellegrin <chripell@fsfe.org>
Cc: Edwin Peer <epeer@tmtservices.co.za>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30 23:51:09 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Daniel Mack fe3ebaad32 [ARM] pxa/raumfeld: fix button name
This fixes a warning when booting 2.6.34-rc2:

[   26.619814] ------------[ cut here ]------------
[   26.624604] WARNING: at fs/proc/generic.c:316 __xlate_proc_name+0xac/0xc0()
[   26.631555] name 'on/off button'
[   26.634753] Modules linked in:

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22 12:03:11 +08:00
Huang Weiyi af089f517a [ARM] pxa/raumfeld: remove duplicated #include
Remove duplicated #include('s) in
 arch/arm/mach-pxa/raumfeld.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22 12:03:10 +08:00
Eric Miao 6533be390b [ARM] pxa/sharpsl: add dependency of max1111 driver to sharpsl_pm
sharpsl_pm.c actually depends on max1111 driver being built-in when
not using legacy ssp code.

Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22 12:03:07 +08:00
Eric Miao 1fe2b6b527 [ARM] pxa: remove unnecessary 'select FB_W100' from some platforms
Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22 12:03:06 +08:00
Jonathan Cameron ef80936f99 [ARM] pxa: remove spi cs gpio direction to avoid clash with driver
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22 12:03:06 +08:00
Jonathan Cameron 2a8ac187e0 [ARM] pxa: fix for variables in uncompress.h being discarded
Due to commit:

    5de813b  ARM: Eliminate decompressor -Dstatic= PIC hack

The data section will be discarded for the decompressor, thus move the
static variables into BSS section by initializing them at run time.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22 12:03:04 +08:00
Linus Torvalds dca1d9f6d7 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits)
  ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock
  ARM: S3C2443: Remove #if 0 for clk_mpll
  ARM: S3C2443: Update notes on MPLLREF clock
  ARM: S3C2443: Further clksrc-clk conversions
  ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation
  USB: Fix s3c-hsotg build following Samsung platform header moves
  ARM: S3C64XX: Reintroduce unconditional build of audio device
  ARM: 5961/1: ux500: fix CLKRST addresses
  ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted
  ASoC: Fix S3C64xx IIS driver for Samsung header reorg
  ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support
  [ARM] pxa: fix typo in mxm8x10.h
  [ARM] pxa/raumfeld: set GPIO drive bits for LED pins
  [ARM] pxa/zeus: Add support for mcp2515 CAN bus
  [ARM] pxa/zeus: Add support for onboard max6369 watchdog
  [ARM] pxa/zeus: Add Eurotech as the manufacturer
  [ARM] pxa/zeus: Correct the USB host initialisation flags
  [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress
  [ARM] pxa: refactor uncompress.h for non-PXA uarts
  [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs
  ...
2010-03-12 16:00:54 -08:00
FUJITA Tomonori 6fee48cd33 dma-mapping: arm: use generic pci_set_dma_mask and pci_set_consistent_dma_mask
This converts arm to the generic pci_set_dma_mask and
pci_set_consistent_dma_mask (removes HAVE_ARCH_PCI_SET_DMA_MASK for
dmabounce).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Looked-over-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:42 -08:00
Jaya Kumar c1c341a060 broadsheetfb: add multiple panel type support
Update broadsheetfb to add support for multiple panel types.  The 3.7" and
6" are known to work but the 9.7" is untested due to lack of hardware.

Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:32 -08:00
Russell King 988addf82e Merge branch 'origin' into devel-stable
Conflicts:
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-mx2/devices.h
	sound/soc/pxa/pxa-ssp.c
2010-03-08 20:21:04 +00:00
Uwe Kleine-König 91a99dfc6b platform-drivers: move probe to .devinit.text in arch/arm
A pointer to a probe callback is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded.  Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.

An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Eric Miao <eric.miao@marvell.com>
Cc: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Cc: Paul Sokolovsky <pmiscml@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:50 -08:00
Eric Miao 62c132a800 [ARM] pxa: fix typo in mxm8x10.h
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 10:24:14 +08:00
Daniel Mack 31436bbe8f [ARM] pxa/raumfeld: set GPIO drive bits for LED pins
Set GPIO bits to pull the pins connected to LEDs for lower power mode.
We want all LEDs off when devices are in suspend.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:59 +08:00
Marc Zyngier 438a22fe26 [ARM] pxa/zeus: Add support for mcp2515 CAN bus
Signed-off-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:59 +08:00
Marc Zyngier fcfdc67ff2 [ARM] pxa/zeus: Add support for onboard max6369 watchdog
Signed-off-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:59 +08:00
Marc Zyngier 90ac0dfd9f [ARM] pxa/zeus: Add Eurotech as the manufacturer
Signed-off-by: Amit Walambe <amit.walambe@eurotech.com>
Signed-off-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:59 +08:00
Marc Zyngier 7ff27dfa6e [ARM] pxa/zeus: Correct the USB host initialisation flags
Signed-off-by: Amit Walambe <amit.walambe@eurotech.com>
Signed-off-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:58 +08:00
Marc Zyngier 662b0836a6 [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress
Zeus console port is wired to a 8250-compatible device (pxa UARTs are
reserved to other uses). This patch allows such a configuration in the
uncompress sequence.

Signed-off-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:58 +08:00
Eric Miao c95efee133 [ARM] pxa: refactor uncompress.h for non-PXA uarts
The original patch came from Marc Zyngier where support of 8250-compatible
UART is required to show the uncompress information. Modified a little bit
here, including changes below:

1. #include <mach/regs-uart.h> is actually not necessary
2. introduced uart_{read,write}() for different base and shift
3. introduced uart_is_enabled() and assumed enabled always for
   non-PXA uarts

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Acked-by: Marc Zyngier <maz@misterjones.org>
2010-03-02 07:40:58 +08:00
Stefan Schmidt 0925e2f0fc [ARM] pxa/imote2: Remove redundant pin entry for nCS.
Also remove a trailing whitespace while being there.

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:53 +08:00
Eric Miao a056bef455 [ARM] pxa: introduce PXA_SSP_LEGACY for legacy SSP API
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:52 +08:00
Stefan Schmidt 98acdbe4cf [ARM] pxa: define zeus_power_off() only when CONFIG_PM enabled
Add some safety check for CONFIG_PM around zeus_power_off(). Without
it linking can fail like this:

arch/arm/mach-pxa/built-in.o: In function `zeus_power_off':
e800.c:(.text+0x2bc8): undefined reference to `pxa27x_cpu_suspend'

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:52 +08:00
Edwin Peer 1f3b536be7 [ARM] pxa: add support for Embedian MXM-8x10
Signed-off-by: Edwin Peer <epeer@tmtservices.co.za>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:51 +08:00
Eric Miao 0dc726bb26 [ARM] pxa: move board board IRQ definitions out of irqs.h
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:51 +08:00
Eric Miao 19851c58e6 [ARM] sa1111: allow cascaded IRQs to be used by platforms
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:51 +08:00
Eric Miao ac609d266e [ARM] locomo: allow cascaded IRQ base to be specified by platforms
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:50 +08:00
Eric Miao 00dd8027b9 [ARM] locomo: remove unused IRQs and avoid unnecessary cascade
IRQ_LOCOMO_* are never used elsewhere, remove these definitions. As well
as the cascade of these IRQs. IRQ_LOCOMO_*_BASE changed to IRQ_LOCOMO_*.

IRQ_LOCOMO_LT and IRQ_LOCOMO_SPI are likely to be used in a same way as
IRQ_LOCOMO_KEY.

IRQ_LOCOMO_GPIO and the demultiplex handler should really be living
somewhere else.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:49 +08:00
Eric Miao da8065ac3e [ARM] locomo: avoid unnecessary cascaded keyboard IRQ
It is not necessary and is over-complicated for IRQ_LOCOMO_KEY to
be a cascaded IRQ of IRQ_LOCOMO_KEY_BASE. Removed and introduced
locomokbd_{open,close} for masking/unmasking of the keyboard IRQ.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:49 +08:00
Eric Miao f69a6548c9 [ARM] pxa/tosa: make use of the matrix keypad driver
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:48 +08:00
Eric Miao 96f6a13a6d [ARM] pxa/cm-x270: avoid direct access of GPIO/MFP registers
Cc: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:48 +08:00
Eric Miao c11b6a420b [ARM] pxa: add the missing AC97 pin configurations
Missing AC97 pin configurations are added where pxa_set_ac97_info() are
called for all pxa25x/pxa27x platforms. Where no exact configuration is
provided, use the default as in sound/arm/pxa2xx-ac97-lib.c

Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:48 +08:00
Eric Miao fb1bf8cd13 [ARM] pxa: introduce processor specific pxa27x_assert_ac97reset()
This is really pxa27x specific and should be kept in pxa27x.c. With this
newly introduced function, the original set_resetgpio_mode() is deprecated.

Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:47 +08:00
Eric Miao bedbda9717 [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:47 +08:00
Eric Miao 07bae6c321 [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms
There are only limited possible LCD pin configurations for pxa25x
platforms, simplify this by macro.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:46 +08:00
Eric Miao 669cb51c6a [ARM] pxa: use chip->ack() instead of accessing GEDR directly
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:45 +08:00
Linus Torvalds ac0f6f927d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (100 commits)
  ARM: Eliminate decompressor -Dstatic= PIC hack
  ARM: 5958/1: ARM: U300: fix inverted clk round rate
  ARM: 5956/1: misplaced parentheses
  ARM: 5955/1: ep93xx: move timer defines into core.c and document
  ARM: 5954/1: ep93xx: move gpio interrupt support to gpio.c
  ARM: 5953/1: ep93xx: fix broken build of clock.c
  ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig
  ARM: 5949/1: NUC900 add gpio virtual memory map
  ARM: 5948/1: Enable timer0 to time4 clock support for nuc910
  ARM: 5940/2: ARM: MMCI: remove custom DBG macro and printk
  ARM: make_coherent(): fix problems with highpte, part 2
  MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself
  ARM: 5945/1: ep93xx: include correct irq.h in core.c
  ARM: 5933/1: amba-pl011: support hardware flow control
  ARM: 5930/1: Add PKMAP area description to memory.txt.
  ARM: 5929/1: Add checks to detect overlap of memory regions.
  ARM: 5928/1: Change type of VMALLOC_END to unsigned long.
  ARM: 5927/1: Make delimiters of DMA area globally visibly.
  ARM: 5926/1: Add "Virtual kernel memory..." printout.
  ARM: 5920/1: OMAP4: Enable L2 Cache
  ...

Fix up trivial conflict in arch/arm/mach-mx25/clock.c
2010-03-01 09:15:15 -08:00
Antonio Ospite 6b727c68ea pxa_camera: remove init() callback
pxa_camera init() callback is sometimes abused to setup MFP for PXA CIF, or
even to request GPIOs to be used by the camera *sensor*. These initializations
can be performed statically in machine init functions.

The current semantics for this init() callback is ambiguous anyways, it is
invoked in pxa_camera_activate(), hence at device node open, but its users use
it like a generic initialization to be done at module init time (configure
MFP, request GPIOs for *sensor* control).

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:11:00 -03:00
Russell King 9f33be2c3a Merge branches 'clks' and 'pnx' into devel 2010-02-25 22:10:38 +00:00
Russell King 2741ecb4ce Merge branch 'misc2' into devel 2010-02-25 22:09:41 +00:00
Fenkart/Bostandzhyan c931b4f655 ARM: 5928/1: Change type of VMALLOC_END to unsigned long.
Makes it consistent with VMALLOC_START

Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15 21:40:33 +00:00
Russell King 2f68ffd11a Merge branch 'arm/clock-event' of git://git.pengutronix.de/git/ukl/linux-2.6 into devel-stable 2010-02-15 21:20:33 +00:00
Russell King 56012808f4 Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stable
Conflicts:
	arch/arm/Makefile
2010-02-15 21:20:18 +00:00
Russell King 0a0300dc8c ARM: Consolidate clks_register() and similar
Most machine classes want some way to register a block of clk_lookup
structures, and most do it by implementing a clks_register() type
function which walks an array, or by open-coding a loop.

Consolidate all this into clkdev_add_table().

Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 17:32:36 +00:00
Tony Lindgren 4e6d488af3 ARM: 5910/1: ARM: Add tmp register for addruart and loadsp
Otherwise more complicated uart configuration won't be possible.
We can use r1 for tmp register for both head.S and debug.S.

NOTE: This patch depends on another patch to add the the tmp register
into all debug-macro.S files. That can be done with:

$ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/"
	arch/arm/*/include/*/debug-macro.S

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 17:27:52 +00:00
Russell King a814290e17 Merge branch 'for-rmk/samsung3' of git://git.fluff.org/bjdooks/linux into devel-stable 2010-01-27 22:11:32 +00:00
Uwe Kleine-König a602f0f2f0 arm/{pxa,sa1100,nomadik}: Don't disable irqs in set_next_event and set_mode
These functions are called with irqs already off.  This commit removes
the calls to raw_local_irq_save and raw_local_irq_restore on platforms
that don't have to use a shared interrupt for their timekeeping.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-01-22 17:04:52 +01:00
Eric Miao c70f5a6099 [ARM] pxa: fix irq suspend/resume for pxa25x
PXA25x does not have IPR registers, saving and restoring should happen
only for pxa27x and pxa3xx.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-01-13 21:01:09 +08:00
Eric Miao 463de2096d [ARM] pxa: fix the incorrect naming of AC97 reset pin config for pxa26x
GPIO89_AC97_nRESET is really a PXA26x specific option and was
incorrectly named.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-01-13 21:01:09 +08:00
Eric Miao 0375fc03cd [ARM] pxa/corgi: fix incorrect default GPIO for UDC Vbus
There is no such GPIO for udc vbus sensing, put '-1' instead of default
'0' as '0' does mean a valid GPIO.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-01-13 21:01:08 +08:00
Cyril Hrubis d13fecd029 [ARM] pxa: fix strange characters in zaurus gpio .desc
Somehow, strange characters made their way zaurus gpio .desc
fields. Fix it.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Stanislav Brabec <utx@penguin.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-01-08 09:42:45 +08:00
Eric Miao 0dfc84c9f5 [ARM] pxa: fix compiler warnings of unused variable 'id' in cpu_is_pxa9*()
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-01-04 14:44:42 +08:00
Eric Miao 2d51a521e6 [ARM] pxa: update pwm_backlight->notify() to include missed 'struct device *'
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-01-04 11:42:01 +08:00
Eric Miao 91a86a964f [ARM] pxa/poodle: fix incorrect 'gpio_card_detect' of MMC
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29 14:11:35 +08:00
Haojian Zhuang f91e4906e2 [ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot
PXA mmc host driver supports card detect, read only and power gpio pin
setting already. Zylonite platform driver needn't implement this any more.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29 14:11:34 +08:00
Marc Zyngier a1916eb0ea [ARM] pxa/zeus: provide power-source information when APM is enabled
Signed-off-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29 14:11:32 +08:00
Marc Zyngier 5f86cebaa5 [ARM] pxa/zeus: relax memory timings on Zeus ethernet ports
DM9000s on Zeus sometime fail under heavy load.
Relaxing the timings a bit seems to be of a great help.

Signed-off-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29 14:11:31 +08:00
Marc Zyngier 100627b4ba [ARM] pxa/zeus: make internal zeus_get_pcb_info static
Signed-off-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29 14:11:30 +08:00
Marek Vasut 9a8a0c46de [ARM] pxa/littleton: select CPU_PXA300 and CPU_PXA310
This has to be selected, otherwise some peripherals don't get initialized.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29 14:11:29 +08:00
Marek Vasut 6d26ce68e0 [ARM] pxa/littleton: add UART3 GPIO config
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29 14:11:28 +08:00
Daniel Mack 550ee52d82 [ARM] pxa/raumfeld: add platform support
This adds support for Raumfeld's 'Controller', 'Connector', 'Speaker S'
and 'Speaker M' devices. They're all based on PXA303 SoCs.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-18 15:34:38 +08:00
Eric Miao 75e874c698 [ARM] pxa: fix no reference of cpu_is_pxa25x() in devices.c
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-16 21:35:52 +08:00
Igor Grinberg 61e0ac03c8 [ARM] pxa/cm-x300: add PWM backlight support
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-16 16:49:22 +08:00
Eric Miao 5c3804629e revert "[ARM] pxa/cm-x300: add PWM backlight support"
Commit db205463fd was incorrectly applied,
and reverted here to re-apply.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-16 16:45:06 +08:00
Marc Zyngier c2de1c3829 [ARM] pxa/zeus: make Viper pcmcia support more generic to support Zeus
The Arcom Zeus CF slot requires the same kind of support as the Viper.
To avoid code duplication, introduce a platform device that abstracts
the differences.

This also allows for the removal of the ugly export of viper_cf_rst().

Signed-off-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-13 21:42:58 +08:00
Marc Zyngier e491a11c77 [ARM] pxa/zeus: basic support for Arcom Zeus SBC
Signed-off-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-13 21:42:58 +08:00
Igor Grinberg 1b82e4c32f [ARM] pxa/em-x270: fix usb hub power up/reset sequence
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-13 21:42:57 +08:00
Linus Torvalds 4ef58d4e2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...
2009-12-09 19:43:33 -08:00
Jiri Kosina d014d04386 Merge branch 'for-next' into for-linus
Conflicts:

	kernel/irq/chip.c
2009-12-07 18:36:35 +01:00
Russell King 0719dc3413 Merge branch 'devel-stable' into devel 2009-12-05 10:35:33 +00:00
André Goddard Rosa af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Dmitry Artamonow 19d6c13b56 [ARM] pxa/hx4700: actually use platform_lcd driver
Commit e2c509c7e6 ([ARM] pxa/hx4700: use platform_lcd driver)
missed to actually register platform device for LCD.
It causes following GCC warning:
arch/arm/mach-pxa/hx4700.c:553: warning: 'hx4700_lcd' defined but not used

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Acked-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:03:15 +08:00
Antonio Ospite 0e85190755 [ARM] pxa/pcm990: don't use pxa_camera init() callback
pxa_camera init() is ambiguous, it's better to configure PXA CIF pins
statically in machine init function.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:03:14 +08:00
Antonio Ospite a7f2bdb39e [ARM] pxa/em-x270: don't use pxa_camera init() callback
pxa_camera init() is ambiguous, it's better to statically configure the sensor.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:03:14 +08:00
Igor Grinberg db205463fd [ARM] pxa/cm-x300: add PWM backlight support
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:03:13 +08:00
Igor Grinberg 14fd9e0053 [ARM] pxa/cm-x300: update authors and copyright
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:03:11 +08:00
Igor Grinberg 9c017ca1a0 [ARM] pxa/cm-x300: add da9030 support
Register DA9030 PMIC. Use only backlight sub-device for now.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:03:10 +08:00
Igor Grinberg edaa64c906 [ARM] pxa/cm-x300: enable USB port 2 for PXA300
Port 2 requires setting of UP2OCR register to function as USB host.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:03:09 +08:00
Igor Grinberg def8252ddb [ARM] pxa/cm-x300: add support for PXA310 cpu
CM-X300 can be assembled with PXA300 and PXA310 CPU. Provide support for
both CPU variants.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:03:09 +08:00
Igor Grinberg b3d01da66d [ARM] pxa/cm-x300: add Wi2Wi chip (Bluetooth and WiFi) initialization
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:03:08 +08:00
Igor Grinberg 74e74defd6 [ARM] pxa/cm-x300: add ac97 controller registration
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:03:07 +08:00
Igor Grinberg 83e560eee1 [ARM] pxa/cm-x300: add TDO35S lcd support
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:03:06 +08:00
Igor Grinberg 55052ea23d [ARM] pxa/cm-x300: add revision difference handling
Different revisions of CM-X300 use different pins for several functions.
Make the kernel aware of it.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:03:05 +08:00
Marc Zyngier 3fe6ccffcb [ARM] pxa/viper: convert to use plat_serial8250_port irqflags field
Use .irqflags in the plat_serial8250_port structure to set IRQ
polarity, and get rid of the corresponding set_irq_type().

Signed-off-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:03:04 +08:00
Antonio Ospite 87303b8a9e [ARM] pxa/ezx: add leds-lp3944 support for A910 EZX phone
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:03:03 +08:00
Antonio Ospite 405ac4015a [ARM] pxa/ezx: add camera support for A780 and A910 EZX phones
Signed-off-by: Bart Visscher <bartv@thisnet.nl>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:03:02 +08:00
Pavel Machek 0ba01ebcb3 [ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_*
Battery power levels are shared between spitz and corgi, rename
variable to reflect it.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:03:01 +08:00
Pavel Machek b64b0b76cd [ARM] pxa/zaurus: cleanup sharpsl_pm.c
This fixes checkpatch/style problems in sharpsl_pm.c, allowing me to
submit real fixes next.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:03:00 +08:00
Haojian Zhuang 61333c6300 [ARM] pxa: rename macro from pxa9xx to pxa93x
Because original macro can only judge whether current CPU is pxa93x,
rename the macro to correct name.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:59 +08:00
Mike Rapoport bf293aec15 [ARM] pxa: add EXT_WAKEUP interrupts handling for pxa3xx
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:58 +08:00
Eric Miao 15cc7112ab [ARM] pxa: make CPU_PXA* to be selectable hidden options
CONFIG_CPU_PXA{300,310,320,930,935,950} are really platform dependent
and should be made into selectable hidden options.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:57 +08:00
Eric Miao 9035a9ece9 [ARM] pxa: select CPU_PXA310 for MACH_COLIBRI300
MACH_COLIBRI300 is supposed to support both PXA300 and PXA310, select
the missing CPU_PXA310.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Acked-by: Daniel Mack <daniel@caiaq.de>
2009-12-01 09:02:57 +08:00
Eric Miao 1493df7319 [ARM] pxa: introduce CONFIG_MACH_ZYLONITE{300,320} for CPU_PXA* removing
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:56 +08:00
Russell King cc155c6f2c [ARM] pxa: allow platforms to control which uarts are registered
For some platforms, it is inappropriate to register all PXA UARTs.
In some cases, the UARTs may not be used, and in others we may want
to avoid registering the UARTs to allow other drivers (eg, FICP) to
make use of the UART.

In addition, a while back there was a request to be able to pass
platform data to the UART driver.

This patch enables all of this by providing functions platforms can
call to register each individual UART.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:55 +08:00
Igor Grinberg 7c6ccbf0dd [ARM] pxa: add U2D registers and bits definitions
This should be eventually moved to somewhere closer to the U2D driver,
but is kept here atm so it's easier for USB configuration code to work.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:54 +08:00
Igor Grinberg e68750aea0 [ARM] pxa: register U2D clock for pxa3xx
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:53 +08:00
Eric Miao 6427d45068 [ARM] pxa: use platform_device_id table for SSP driver
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:52 +08:00
Eric Miao de0710aa81 [ARM] pxa: re-order platforms in Kconfig and Makefile
Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted
in the following order:

 1. By category:
    Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed
    by end-user products (this is to ensure the commonly referenced platforms
    will appear first)

 2. By vendor name in alphabetic within each category
    (this is to ensure code reuse and similar platforms can be grouped as
     much as possible)

	   VENDOR        BOARD
	Intel/Marvell   Lubbock
	Intel/Marvell   Mainstone
	Intel/Marvell   Zylonite
	Intel/Marvell   Littleton
	Intel/Marvell   TavorEVB
	Intel/Marvell   SAAR

	Accelent        IDP
	Arcom/Eurotech  VIPER
	Community       Balloon3
	Cogent          CSB726
	CompuLab        EM_X270
	CompuLab        EXEDA
	CompuLab        ARMCORE
	CompuLab        CM_X300
	Gumstix         Gumstix
	Intel Research  MOTE2
	Intel research  Stargate2
	Iskratel        XCEP
	Keith and Koep  Trizeps4
	LogicPD         LPD270
	Phytec          PCM027
	Toradex         Colibri

	HP              HX4700
	HP              H5000
	HTC             Himalaya
	HTC             Magician
	Mitac           MioA701
	Motorola        EZX
	NEC             MP900C
	Palm            Palm PDA
	Palm            Palm GSM
	Sharp           Zaurus
	Toshiba         E-Series

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:50 +08:00
Tomáš Čech d0a92fd3b8 [ARM] pxa/treo: add Palm Centro 685 support
Signed-off-by: Tomáš Čech <sleep_walker@suse.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:49 +08:00
Tomáš Čech bb2ae8f032 [ARM] pxa/treo: generalisation of Treo680 code
Signed-off-by: Tomáš Čech <sleep_walker@suse.cz>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:48 +08:00
Haojian Zhuang d62238711a [ARM] pxa: update flash structure in onenand info
Since flash structure is changed from flash_platform_data to
onenand_platform_data in generic driver. Update the struct in saar
and ttc platform driver.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:47 +08:00
Haojian Zhuang b1e3719e65 [ARM] pxa: add onenand support for SAAR
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:46 +08:00
Haojian Zhuang 82b95ecb96 pxa3xx_nand: move pxa3xx_nand.h common into plat directory
Since the same nand controller is shared between ARCH_PXA and ARCH_MMP. Move
the pxa3xx_nand.h from mach directory to plat directoy.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:43 +08:00
Haojian Zhuang 70c7d2dd27 [ARM] pxa/saar: set default WLED output current
Set default WLED output current in saar. Otherwise, LCD backlight won't be
effective.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:35 +08:00
Pieter Grimmerink 049ad833b1 pxafb: add transparency field to pxafb_mode_info struct
This allows to select either RGB565 (transparency 0) or RGBT555
(transparency 1) from the mode info

Signed-off-by: Pieter Grimmerink <p.grimmerink@inepro.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:30 +08:00
Pavel Machek 81065518ed [ARM] pxa/spitz: fix compile regression on spitz
If CONFIG_AKITA is not set, spitz fails to compile. It worked ok in
rc5. Fix is one more ifdef...

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Stanislav Brabec <utx@penguin.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-22 09:32:43 -06:00
Daniel Mack 68a31de302 [ARM] pxa/cpufreq: fix index assignments for end marker
I stumbled over two small things regarding the .index field assignment
in the dynamically created cpu frequency tables for pxa2xx and pxa3xx.

Even though that doesn't currently cause any problem, it should still be
fixed in case the logic in the CPUFREQ core changes.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-20 14:23:13 -06:00
Paul Parsons 10d5d99e88 [ARM] pxa/hx4700: fix hx4700 touchscreen pressure values
hx4700 touchscreen events were being dropped in ads7846_rx() because their
pressure values consistently exceeded the platform maximum of 512; a sample
of 256 pressure values were in the range 531 to 815.  Doubling the platform
maximum to 1024 allows hx4700 touchscreen events to pass the test.

Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-17 00:36:16 +08:00
Marek Vasut 15f593cfcb [ARM] pxa/colibri: fix AC97 ifdefs and add missing include
The AC97 part wasn't initialized on Colibri/PXA320 because the macros
were wrong. Also, the code didn't compile because of a header file not
being included.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-13 16:25:47 +08:00
Marc Zyngier b2b3631662 [ARM] pxa: fix interrupts number calculation when CONFIG_PXA_HAVE_ISA_IRQS=y
Commit d2c3706842 ([ARM] pxa:
initialize default interrupt priority and use ICHP for IRQ handling)
broke ISA interrupt support on pxa27x/3xx.

In such a case, PXA_IRQ(0) != 0, and the IRQ number computed from
ICHP must be offset by PXA_IRQ(0).

Tested on an Arcom Zeus (pxa270), with both CONFIG_PXA_HAVE_ISA_IRQS
enabled and disabled.

Signed-off-by: Marc Zyngier <maz@misterjones.org>
Tested-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-13 16:25:46 +08:00
Haojian Zhuang c482ae4dcf [ARM] pxa: fix resume failure by saving/restoring IPRx registers
Since interrupt handler is changed to use interrupt priority, we also need
to save and restore these interrupt controller registers in suspend/resume
routine.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Tested-by: Daniel Mack <daniel@caiaq.de>
Tested-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-03 12:00:56 +08:00
Ondrej Zajicek 902805dbda [ARM] pxa/palm: fix incorrect initialization of Palm Tungsten C keyboard
Palm Tungsten C keyboard structure has swapped
rows/cols gpio structures and does not work.
This patch fixes it.

Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org>
Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-03 10:49:54 +08:00
Stanislav Brabec 5e0fa3f63e [ARM] pxa/zaurus: fix NAND flash OOB layout for Borzoi
Borzoi, Terrier and Akita use the same NAND Flash OOB layout, which
seems to be different from Spitz for some reason. Here is a fix.

When the code was ported to the platform data, the map was applied just
for Akita.

After this patch, Flash works again on Borzoi. Terrier still has a
problem with partition table different from Borzoi (unfixable without
reading of the system configuration in flash) and JFFS2 partitions can
be mounted (with some "Empty flash at ... ends at ..." in the syslog).

Signed-off-by: Stanislav Brabec <utx@penguin.cz>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-03 10:49:53 +08:00
Stanislav Brabec f6919eb411 [ARM] pxa/spitz: add gpio button support (fixes regression)
Updating desc for lid keys and resending patch with proper comments:
Define Spitz buttons as GPIO keys in a way compatible with the old driver:

On/Off: As Suspend EV_PWR key
Raw values of lid sensors SWA and SWB: As EV_SW switches
SWA: Display Down
SWB: Lid Closed
Recommended user space decoding:
SWA==0 & SWB==0: lid opened (landscape mode)
SWA==1 & SWB==0: invalid (or mechanic race condition)
SWA==0 & SWB==1: lid closed with display up (portrait mode or mechanic
                 race condition while closing to display-less mode)
SWA==1 & SWB==1: lid closed with display down (display-less mode)

AK_INT remote trigger is not mapped as input event. Without complete
remote driver and remote pull-up control it has no useful
interpretation.

Signed-off-by: Stanislav Brabec <utx@penguin.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-17 22:55:44 +08:00
Mike Rapoport 0bff2fc319 [ARM] pxa/cm-x300: fix mmc numbering
CM-X300 has libertas on mmc2 and  SD card slot on mmc1.
This patch fixes wrong MMC ports assignment.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-17 22:55:44 +08:00
Dennis O'Brien 4367216a09 [ARM] pxa: workaround errata #37 by not using half turbo switching
PXA27x Errata #37 implies system will hang when switching into or out of
half turbo (HT bit in CLKCFG) mode, workaround this by not using it.

Signed-off-by: Dennis O'Brien <dennis.obrien@eqware.net>
Cc: stable-2.6.31 <stable@kernel.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 15:30:50 +08:00
Julia Lawall c639ef4317 [ARM] pxa/csb726: adjust duplicate structure field initialization
Currently the irq_type field of the csb726_lan_config structure is
initialized twice.  The value in the first case,
SMSC911X_IRQ_POLARITY_ACTIVE_LOW, is normally stored in the irq_polarity
field, so I have renamed the field in the first initialization to that.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 15:30:50 +08:00
Russell King ae19ffbadc Merge branch 'master' into for-linus 2009-09-22 21:01:40 +01:00
Russell King 28f9f19db9 Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2009-09-21 16:02:30 +01:00
Pavel Machek 3318c4bddb ARM: spitz: fix touchscreen max presure
This fixes max_pressure for spitz's touchscreen, and is requirement
for getting reasonable pressure numbers from touchscreen driver.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-19 12:14:06 +01:00
Linus Torvalds 133309a89e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (52 commits)
  Input: bcm5974 - silence uninitialized variables warnings
  Input: wistron_btns - add keymap for AOpen 1557
  Input: psmouse - use boolean type
  Input: i8042 - use platform_driver_probe
  Input: i8042 - use boolean type where it makes sense
  Input: i8042 - try disabling and re-enabling AUX port at close
  Input: pxa27x_keypad - allow modifying keymap from userspace
  Input: sunkbd - fix formatting
  Input: i8042 - bypass AUX IRQ delivery test on laptops
  Input: wacom_w8001 - simplify querying logic
  Input: atkbd - allow setting force-release bitmap via sysfs
  Input: w90p910_keypad - move a dereference below a NULL test
  Input: add twl4030_keypad driver
  Input: matrix-keypad - add function to build device keymap
  Input: tosakbd - fix cleaning up KEY_STROBEs after error
  Input: joydev - validate axis/button maps before clobbering current ones
  Input: xpad - add USB ID for the drumkit controller from Rock Band
  Input: w90p910_keypad - rename driver name to match platform
  Input: add new driver for Sentelic Finger Sensing Pad
  Input: psmouse - allow defining read-only attributes
  ...
2009-09-14 17:56:51 -07:00
Linus Torvalds 2ca7d674d7 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (257 commits)
  [ARM] Update mach-types
  ARM: 5636/1: Move vendor enum to AMBA include
  ARM: Fix pfn_valid() for sparse memory
  [ARM] orion5x: Add LaCie NAS 2Big Network support
  [ARM] pxa/sharpsl_pm: zaurus c3000 aka spitz: fix resume
  ARM: 5686/1: at91: Correct AC97 reset line in at91sam9263ek board
  ARM: 5640/1: This patch modifies the support of AC97 on the at91sam9263 ek board
  ARM: 5689/1: Update default config of HP Jornada 700-series machines
  ARM: 5691/1: fix cache aliasing issues between kmap() and kmap_atomic() with highmem
  ARM: 5688/1: ks8695_serial: disable_irq() lockup
  ARM: 5687/1: fix an oops with highmem
  ARM: 5684/1: Add nuc960 platform to w90x900
  ARM: 5683/1: Add nuc950 platform to w90x900
  ARM: 5682/1: Add cpu.c and dev.c and modify some files of w90p910 platform
  ARM: 5626/1: add suspend/resume functions to amba-pl011 serial driver
  ARM: 5625/1: fix hard coded 4K resource size in amba bus detection
  MMC: MMCI: convert realview MMC to use gpiolib
  ARM: 5685/1: Make MMCI driver compile without gpiolib
  ARM: implement highpte
  ARM: Show FIQ in /proc/interrupts on CONFIG_FIQ
  ...

Fix up trivial conflict in arch/arm/kernel/signal.c.

It was due to the TIF_NOTIFY_RESUME addition in commit d0420c83f ("KEYS:
Extend TIF_NOTIFY_RESUME to (almost) all architectures") and follow-ups.
2009-09-14 17:48:14 -07:00
Daniel Mack 52a7a1cec8 [ARM] pxafb: add accelerator ID for PXA3xx GCU
Add ID 99 for PXA3xx frame buffers and report it in the pxa frame buffer
conditionally, depending on a new flag in struct pxafb_mach_info.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: linux-fbdev-devel@lists.sourceforge.net
Cc: Dennis Oliver Kropp <dok@directfb.org>
Cc: Sven Neumann <s.neumann@raumfeld.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-12 00:16:27 +08:00
Dmitry Torokhov bd96f37895 Input: pxa27x_keypad - allow modifying keymap from userspace
Tested-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-10 22:11:34 -07:00
Takashi Iwai e0b3032bcd Merge branch 'topic/asoc' into for-linus
* topic/asoc: (226 commits)
  ASoC: au1x: PSC-AC97 bugfixes
  ASoC: Fix WM835x Out4 capture enumeration
  ASoC: Remove unuused hw_read_t
  ASoC: fix pxa2xx-ac97.c breakage
  ASoC: Fully specify DC servo bits to update in wm_hubs
  ASoC: Debugged improper setting of PLL fields in WM8580 driver
  ASoC: new board driver to connect bfin-5xx with ad1836 codec
  ASoC: OMAP: Add functionality to set CLKR and FSR sources in McBSP DAI
  ASoC: davinci: i2c device creation moved into board files
  ASoC: Don't reconfigure WM8350 FLL if not needed
  ASoC: Fix s3c-i2s-v2 build
  ASoC: Make platform data optional for TLV320AIC3x
  ASoC: Add S3C24xx dependencies for Simtec machines
  ASoC: SDP3430: Fix TWL GPIO6 pin mux request
  ASoC: S3C platform: Fix s3c2410_dma_started() called at improper time
  ARM: OMAP: McBSP: Merge two functions into omap_mcbsp_start/_stop
  ASoC: OMAP: Fix setup of XCCR and RCCR registers in McBSP DAI
  OMAP: McBSP: Use textual values in DMA operating mode sysfs files
  ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510
  ASoC: Select core DMA when building for S3C64xx
  ...
2009-09-10 15:32:40 +02:00