Commit Graph

14 Commits

Author SHA1 Message Date
Thierry Reding ac330f45c7 gpu: host1x: Drop unnecessary host1x argument
Functions taking a pointer to a host1x syncpoint as an argument don't
need to specify a pointer to a host1x instance because it can be
obtained from the syncpoint.

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-05-18 21:51:01 +02:00
Thierry Reding 24c94e166d gpu: host1x: Remove wait check support
The job submission userspace ABI doesn't support this and there are no
plans to implement it, so all of this code is dead and can be removed.

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-05-18 21:50:04 +02:00
Mikko Perttunen 2316f29fb5 gpu: host1x: Enable gather filter
The gather filter is a feature present on Tegra124 and newer where the
hardware prevents GATHERed command buffers from executing commands
normally reserved for the CDMA pushbuffer which is maintained by the
kernel driver.

This commit enables the gather filter on all supporting hardware.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:52 +02:00
Mikko Perttunen c3f52220f2 gpu: host1x: Enable Tegra186 syncpoint protection
Since Tegra186 the Host1x hardware allows syncpoints to be assigned to
specific channels, preventing any other channels from incrementing
them.

Enable this feature where available and assign syncpoints to channels
when submitting a job. Syncpoints are currently never unassigned from
channels since that would require extra work and is unnecessary with
the current channel allocation model.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20 14:19:52 +02:00
Mikko Perttunen 8474b02531 gpu: host1x: Refactor channel allocation code
This is largely a rewrite of the Host1x channel allocation code, bringing
several changes:

- The previous code could deadlock due to an interaction
  between the 'reflock' mutex and CDMA timeout handling.
  This gets rid of the mutex.
- Support for more than 32 channels, required for Tegra186
- General refactoring, including better encapsulation
  of channel ownership handling into channel.c

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-06-15 14:25:38 +02:00
Thierry Reding 0b8070d12e gpu: host1x: Whitespace cleanup for readability
Insert a number of blank lines in places where they increase readability
of the code. Also collapse various variable declarations to shorten some
functions and finally rewrite some code for readability.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-23 11:59:30 +02:00
Thierry Reding 5c0d8d386b gpu: host1x: Use unsigned int consistently for IDs
IDs can never be negative so use unsigned int. In some instances an
explicitly sized type (such as u32) was used for no particular reason,
so turn those into unsigned int as well for consistency.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-23 11:59:24 +02:00
Thierry Reding b40d02bf96 gpu: host1x: Use struct host1x_bo pointers in traces
Rather than cast to a u32 use the struct host1x_bo pointers directly.
This avoid annoying warnings for 64-bit builds.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:11:32 +01:00
Arto Merilainen f5a954fed9 gpu: host1x: Add syncpoint base support
This patch adds support for hardware syncpoint bases. This creates
a simple mechanism to stall the command FIFO until an operation is
completed.

Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-31 09:55:48 +01:00
Thierry Reding fc3be3e8fc gpu: host1x: Use relative include paths
This is slightly safer than adding -Idrivers/gpu/host1x to cflags-y.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-31 09:55:40 +01:00
Thierry Reding 35d747a81d gpu: host1x: Expose syncpt and channel functionality
Expose the buffer objects, syncpoint and channel functionality in the
public public header so that drivers can use them.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-31 09:20:11 +01:00
Thierry Reding e1e906448d gpu: host1x: Make host1x header file public
In preparation to support host1x clients other than DRM, move this
header into a public location.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-31 09:20:10 +01:00
Terje Bergstrom 6236451d83 gpu: host1x: Add debug support
Add support for host1x debugging. Adds debugfs entries, and dumps
channel state to UART in case of stuck job.

Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-22 12:32:46 +02:00
Terje Bergstrom 6579324a41 gpu: host1x: Add channel support
Add support for host1x client modules, and host1x channels to submit
work to the clients.

Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-22 12:32:43 +02:00