Emitting an OOM message isn't necessary after input_allocate_device
as there's a generic OOM and a dump_stack already done.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Some BIOS versions/Vaio models apparently ship with two nearly identical
functions to handle backlight related controls.
The only difference seems to be:
If (LEqual (BUF1, 0x40))
{
Store (0x40, P80H)
Store (BUF2, Local0)
- And (Local0, One, Local0)
+ And (Local0, 0x03, Local0)
Store (Local0, ^^H_EC.KLPC)
}
Avoid erroring out on initialization and messing things up on cleanup
for now since we never call into these methods with anything different
than 1 or 0.
This issue was found on a Sony VPCSE1V9E/BIOS R2087H4.
Cc: Marco Krüger <krgsch@gmail.com>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
All my testing has been on laptops with a hw killswitch, so to be on the
safe side disable rfkill functionality on models without a hw killswitch for
now. Once we gather some feedback on laptops without a hw killswitch this
decision maybe reconsidered.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Setting force_rfkill will cause the dell-laptop rfkill code to skip its
whitelist checks, this will allow individual users to override the whitelist,
as well as to gather info from users to improve the checks.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Some time is needed for the BIOS to do its work, but 250ms should be plenty.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Instead when hw-blocked always write 1 to the blocked bit for the radio in
question. This is necessary to properly set all the blocked bits for hw-switch
controlled radios to 1 after power-on and resume.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This is necessary for 3 reasons:
1) To apply sw_state changes made while hw-blocked
2) To set all the blocked bits for hw-switch controlled radios to 1 when the
switch gets changed to off, this is necessary on some models to actually
turn the radio status LEDs off.
3) On some models non hw-switch controlled radios will have their block bit
cleared (potentially undoing a soft-block) on hw-switch toggle, this
restores the sw-block in this case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This makes dell-laptop's rfkill code consistent with other drivers which
allow sw_state changes while hw blocked.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
On machines with a hardware switch, the blocking settings can not be changed
through a Fn + wireless-key combo, so there is no reason to read back the
blocking state from the BIOS.
Reading back is not only not necessary it is actually harmful, since on some
machines the blocking state will be cleared to all 0 after a wireless switch
toggle, even for radios not controlled by the hw-switch (yeah firmware bugs).
This causes "magic" changes to the sw_state. This is inconsistent with other
rfkill drivers which preserve the sw_state over a hw kill on / off.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The query callback should only update the hw_state, see the comment in
net/rfkill/core.c in rfkill_set_block, which is its only caller.
rfkill_set_block will modify the sw_state directly after calling query so
calling set_sw_state is an expensive NOP.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
To ensure we don't enter any hw-switch related code paths on machines without
a hw-switch.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The rfkill functionality was removed from the dell-laptop driver because it
was causing problems on various non Latitude models, and the blacklist kept
growing and growing. In the thread discussing this Dell mentioned that they
only QA the rfkill acpi interface on Latitudes and indeed there have been
no blacklist entries for Latitudes.
Note that the blacklist contained no Vostros either, and most Vostros have
a hardware switch too, so we could consider supporting Vostros with a
hardware switch too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Without rfkill functionality in dell-laptop I have the following problems:
-If the hardware radio switch is set to disable the radio, then userspace
will still think it can use wireless and bluetooth.
-The wwan / 3g modem cannot be soft blocked without the dell-laptop rfkill
functionality
I know the rfkill functionality was removed from the dell-laptop driver because
it caused more problems then it fixed, and the blacklist for it was growing out
of control.
But in the thread discussing this Dell mentioned that they only QA the rfkill
acpi interface on Latitudes and indeed there have been no blacklist entries
for Latitudes. Therefor I would like to bring the rfkill functionality back
only for Latitudes. This patch is a straight-forward revert. The next patch
in this set will drop the blacklist and replace it with a Latitude check.
This reverts commit a6c2390cd6.
Conflicts:
drivers/platform/x86/dell-laptop.c
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
- ACPI-based device hotplug fixes for issues introduced recently and
a fix for an older error code path bug in the ACPI PCI host bridge
driver.
- Fix for recently broken OMAP cpufreq build from Viresh Kumar.
- Fix for a recent hibernation regression related to s2disk.
- Fix for a locking-related regression in the ACPI EC driver from
Puneet Kumar.
- System suspend error code path fix related to runtime PM and
runtime PM documentation update from Ulf Hansson.
- cpufreq's conservative governor fix from Xiaoguang Chen.
- New processor IDs for intel_idle and turbostat and removal of
an obsolete Kconfig option from Len Brown.
- New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg.
- Removal of several ACPI video DMI blacklist entries that are not
necessary any more from Aaron Lu.
- Rework of the ACPI companion representation in struct device and
code cleanup related to that change from Rafael J Wysocki,
Lan Tianyu and Jarkko Nikula.
- Fixes for assigning names to ACPI-enumerated I2C and SPI devices
from Jarkko Nikula.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=QMp+
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI and power management updates from Rafael Wysocki:
- ACPI-based device hotplug fixes for issues introduced recently and a
fix for an older error code path bug in the ACPI PCI host bridge
driver
- Fix for recently broken OMAP cpufreq build from Viresh Kumar
- Fix for a recent hibernation regression related to s2disk
- Fix for a locking-related regression in the ACPI EC driver from
Puneet Kumar
- System suspend error code path fix related to runtime PM and runtime
PM documentation update from Ulf Hansson
- cpufreq's conservative governor fix from Xiaoguang Chen
- New processor IDs for intel_idle and turbostat and removal of an
obsolete Kconfig option from Len Brown
- New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg
- Removal of several ACPI video DMI blacklist entries that are not
necessary any more from Aaron Lu
- Rework of the ACPI companion representation in struct device and code
cleanup related to that change from Rafael J Wysocki, Lan Tianyu and
Jarkko Nikula
- Fixes for assigning names to ACPI-enumerated I2C and SPI devices from
Jarkko Nikula
* tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
PCI / hotplug / ACPI: Drop unused acpiphp_debug declaration
ACPI / scan: Set flags.match_driver in acpi_bus_scan_fixed()
ACPI / PCI root: Clear driver_data before failing enumeration
ACPI / hotplug: Fix PCI host bridge hot removal
ACPI / hotplug: Fix acpi_bus_get_device() return value check
cpufreq: governor: Remove fossil comment in the cpufreq_governor_dbs()
ACPI / video: clean up DMI table for initial black screen problem
ACPI / EC: Ensure lock is acquired before accessing ec struct members
PM / Hibernate: Do not crash kernel in free_basic_memory_bitmaps()
ACPI / AC: Remove struct acpi_device pointer from struct acpi_ac
spi: Use stable dev_name for ACPI enumerated SPI slaves
i2c: Use stable dev_name for ACPI enumerated I2C slaves
ACPI: Provide acpi_dev_name accessor for struct acpi_device device name
ACPI / bind: Use (put|get)_device() on ACPI device objects too
ACPI: Eliminate the DEVICE_ACPI_HANDLE() macro
ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_node
cpufreq: OMAP: Fix compilation error 'r & ret undeclared'
PM / Runtime: Fix error path for prepare
PM / Runtime: Update documentation around probe|remove|suspend
cpufreq: conservative: set requested_freq to policy max when it is over policy max
...
Use this new function to make code more comprehensible, since we are
reinitialzing the completion, not initializing.
[akpm@linux-foundation.org: linux-next resyncs]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since DEVICE_ACPI_HANDLE() is now literally identical to
ACPI_HANDLE(), replace it with the latter everywhere and drop its
definition from include/acpi.h.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- New power capping framework and the the Intel Running Average Power
Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.
- Addition of the in-kernel switching feature to the arm_big_little
cpufreq driver from Viresh Kumar and Nicolas Pitre.
- cpufreq support for iMac G5 from Aaro Koskinen.
- Baytrail processors support for intel_pstate from Dirk Brandewie.
- cpufreq support for Midway/ECX-2000 from Mark Langsdorf.
- ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.
- ACPI power management support for the I2C and SPI bus types from
Mika Westerberg and Lv Zheng.
- cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.
- cpufreq drivers updates (mostly fixes and cleanups) from Viresh Kumar,
Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz Majewski,
Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.
- intel_pstate updates from Dirk Brandewie and Adrian Huang.
- ACPICA update to version 20130927 includig fixes and cleanups and
some reduction of divergences between the ACPICA code in the kernel
and ACPICA upstream in order to improve the automatic ACPICA patch
generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki,
Naresh Bhat, Bjorn Helgaas, David E Box.
- ACPI IPMI driver fixes and cleanups from Lv Zheng.
- ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani,
Zhang Yanfei, Rafael J Wysocki.
- Conversion of the ACPI AC driver to the platform bus type and
multiple driver fixes and cleanups related to ACPI from Zhang Rui.
- ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.
- Fixes and cleanups and new blacklist entries related to the ACPI
video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
Kirill Tkhai.
- cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.
- cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
Bartlomiej Zolnierkiewicz, Prarit Bhargava.
- devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.
- Operation Performance Points (OPP) core updates from Nishanth Menon.
- Runtime power management core fix from Rafael J Wysocki and update
from Ulf Hansson.
- Hibernation fixes from Aaron Lu and Rafael J Wysocki.
- Device suspend/resume lockup detection mechanism from Benoit Goby.
- Removal of unused proc directories created for various ACPI drivers
from Lan Tianyu.
- ACPI LPSS driver fix and new device IDs for the ACPI platform scan
handler from Heikki Krogerus and Jarkko Nikula.
- New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.
- Assorted fixes and cleanups related to ACPI from Andy Shevchenko,
Al Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
Liu Chuansheng.
- Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
Jean-Christophe Plagniol-Villard.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=JCxk
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael J Wysocki:
- New power capping framework and the the Intel Running Average Power
Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.
- Addition of the in-kernel switching feature to the arm_big_little
cpufreq driver from Viresh Kumar and Nicolas Pitre.
- cpufreq support for iMac G5 from Aaro Koskinen.
- Baytrail processors support for intel_pstate from Dirk Brandewie.
- cpufreq support for Midway/ECX-2000 from Mark Langsdorf.
- ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.
- ACPI power management support for the I2C and SPI bus types from Mika
Westerberg and Lv Zheng.
- cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.
- cpufreq drivers updates (mostly fixes and cleanups) from Viresh
Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz
Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.
- intel_pstate updates from Dirk Brandewie and Adrian Huang.
- ACPICA update to version 20130927 includig fixes and cleanups and
some reduction of divergences between the ACPICA code in the kernel
and ACPICA upstream in order to improve the automatic ACPICA patch
generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh
Bhat, Bjorn Helgaas, David E Box.
- ACPI IPMI driver fixes and cleanups from Lv Zheng.
- ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang
Yanfei, Rafael J Wysocki.
- Conversion of the ACPI AC driver to the platform bus type and
multiple driver fixes and cleanups related to ACPI from Zhang Rui.
- ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.
- Fixes and cleanups and new blacklist entries related to the ACPI
video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
Kirill Tkhai.
- cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.
- cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
Bartlomiej Zolnierkiewicz, Prarit Bhargava.
- devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.
- Operation Performance Points (OPP) core updates from Nishanth Menon.
- Runtime power management core fix from Rafael J Wysocki and update
from Ulf Hansson.
- Hibernation fixes from Aaron Lu and Rafael J Wysocki.
- Device suspend/resume lockup detection mechanism from Benoit Goby.
- Removal of unused proc directories created for various ACPI drivers
from Lan Tianyu.
- ACPI LPSS driver fix and new device IDs for the ACPI platform scan
handler from Heikki Krogerus and Jarkko Nikula.
- New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.
- Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al
Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
Liu Chuansheng.
- Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
Jean-Christophe Plagniol-Villard.
* tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits)
cpufreq: conservative: fix requested_freq reduction issue
ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines
PM / runtime: Use pm_runtime_put_sync() in __device_release_driver()
ACPI / event: remove unneeded NULL pointer check
Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1"
ACPI / video: Quirk initial backlight level 0
ACPI / video: Fix initial level validity test
intel_pstate: skip the driver if ACPI has power mgmt option
PM / hibernate: Avoid overflow in hibernate_preallocate_memory()
ACPI / hotplug: Do not execute "insert in progress" _OST
ACPI / hotplug: Carry out PCI root eject directly
ACPI / hotplug: Merge device hot-removal routines
ACPI / hotplug: Make acpi_bus_hot_remove_device() internal
ACPI / hotplug: Simplify device ejection routines
ACPI / hotplug: Fix handle_root_bridge_removal()
ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug
ACPI / scan: Start matching drivers after trying scan handlers
ACPI: Remove acpi_pci_slot_init() headers from internal.h
ACPI / blacklist: fix name of ThinkPad Edge E530
PowerCap: Fix build error with option -Werror=format-security
...
Conflicts:
arch/arm/mach-omap2/opp.c
drivers/Kconfig
drivers/spi/spi.c
There are no too intrusive changes in this update batch. The biggest
LOC is found in the new DICE driver, and other small changes are
scattered over the whole sound subtree (which is a common pattern).
Below are highlights:
- ALSA core:
* Memory allocation support with genpool
* Fix blocking in drain ioctl of compress_offload
- HD-audio:
* Improved AMD HDMI supports
* Intel HDMI detection improvements
* thinkpad_acpi mute-key integration
* New PCI ID, New ALC255,285,293 codecs, CX20952
- USB-audio:
* New buffer size management
* Clean up endpoint handling codes
- ASoC:
* Further work on the dmaengine helpers, including support for
configuring the parameters for DMA by reading the capabilities of
the DMA controller which removes some guesswork and magic numbers
from drivers.
* A refresh of the documentation.
* Conversions of many drivers to direct regmap API usage in order to
allow the ASoC level register I/O code to be removed, this will
hopefully be completed by v3.14.
* Support for using async register I/O in DAPM, reducing the time
taken to implement power transitions on systems that support it.
- Fireiwre: DICE driver
- Lots of small fixes for bugs reported by Coverity
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=lxuj
-----END PGP SIGNATURE-----
Merge tag 'sound-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There are no too intrusive changes in this update batch. The biggest
LOC is found in the new DICE driver, and other small changes are
scattered over the whole sound subtree (which is a common pattern).
Below are highlights:
- ALSA core:
* Memory allocation support with genpool
* Fix blocking in drain ioctl of compress_offload
- HD-audio:
* Improved AMD HDMI supports
* Intel HDMI detection improvements
* thinkpad_acpi mute-key integration
* New PCI ID, New ALC255,285,293 codecs, CX20952
- USB-audio:
* New buffer size management
* Clean up endpoint handling codes
- ASoC:
* Further work on the dmaengine helpers, including support for
configuring the parameters for DMA by reading the capabilities of
the DMA controller which removes some guesswork and magic numbers
from drivers.
* A refresh of the documentation.
* Conversions of many drivers to direct regmap API usage in order
to allow the ASoC level register I/O code to be removed, this
will hopefully be completed by v3.14.
* Support for using async register I/O in DAPM, reducing the time
taken to implement power transitions on systems that support it.
- Firewire: DICE driver
- Lots of small fixes for bugs reported by Coverity"
* tag 'sound-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (382 commits)
ALSA: hda/realtek - Add new codec ALC255/ALC3234 UAJ supported
ALSA: hda - Apply MacBook fixups for CS4208 correctly
ASoC: fsl: imx-wm8962: remove an unneeded check
ASoC: fsl: imx-pcm-fiq: Remove unused 'runtime' variable
ALSA: hda/realtek - Make fixup regs persist after resume
ALSA: hda_intel: ratelimit "spurious response" message
ASoC: generic-dmaengine-pcm: Use SNDRV_DMA_TYPE_DEV_IRAM as default
ASoC: dapm: Use WARN_ON() instead of BUG_ON()
ASoC: wm_adsp: Fix BUG_ON() and WARN_ON() usages
ASoC: Replace BUG() with WARN()
ASoC: wm_hubs: Replace BUG() with WARN()
ASoC: wm8996: Replace BUG() with WARN()
ASoC: wm8962: Replace BUG() with WARN()
ASoC: wm8958: Replace BUG() with WARN()
ASoC: wm8904: Replace BUG() with WARN()
ASoC: wm8900: Replace BUG() with WARN()
ASoC: wm8350: Replace BUG() with WARN()
ASoC: txx9: Use WARN_ON() instead of BUG_ON()
ASoC: sh: Use WARN_ON() instead of BUG_ON()
ASoC: rcar: Use WARN_ON() instead of BUG_ON()
...
Pull x86/intel-mid changes from Ingo Molnar:
"Update the 'intel mid' (mobile internet device) platform code as Intel
is rolling out more SoC designs.
This gets rid of most of the 'MRST' platform code in the process,
mostly by renaming and shuffling code around into their respective
'intel-mid' platform drivers"
* 'x86-intel-mid-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, intel-mid: Do not re-introduce usage of obsolete __cpuinit
intel_mid: Move platform device setups to their own platform_<device>.* files
x86: intel-mid: Add section for sfi device table
intel-mid: sfi: Allow struct devs_id.get_platform_data to be NULL
intel_mid: Moved SFI related code to sfi.c
intel_mid: Added custom handler for ipc devices
intel_mid: Added custom device_handler support
intel_mid: Refactored sfi_parse_devs() function
intel_mid: Renamed *mrst* to *intel_mid*
pci: intel_mid: Return true/false in function returning bool
intel_mid: Renamed *mrst* to *intel_mid*
mrst: Fixed indentation issues
mrst: Fixed printk/pr_* related issues
A few final updates for v3.13, all driver updates apart from some DPCM
and Coverity fixes which should have minor impact on practical systems.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQIcBAABAgAGBQJSdzlPAAoJELSic+t+oim9sn0QAJJuPBcCq2pJZE0nhacNeqx0
YaDIEoNmSOutY7zdQ0/xtWazZOmn1CvxB6/vYPwhrXVqUSZPEuWWFeNsGoDNtOLJ
9x+b7RfY+wN7P2CNgQaEx4kFix4TeGDTZ5eaViuqSFqgDYkSSmOHNh5G2DNT2yuu
Jm1OzFfArSE+s29ezMK7Gn6FhfXUbtSOpOrewqFrua68E4B4zppD7b0PnTB4kOZ5
LHBwarpE30VDt9e6jcJIxjtGVqV7xau50RBcsnKvCdtdh/UPmOW4VF9RqkeeYHIb
dgqAEswE2i2g4QtK/ZxUrLgcGT/sBGuYMHRATlUuo052izFtXNNjgfHtz/Qr9Uxd
N5d0Vf2HklTlS6VXNystvqSH7Tld3DFMEsGEk/PK4zPqHI8j4+3EpxlQLpUvipUV
bLo2XubRXDcJ0Ej+0yi38lAQQVfKzdMJD+m6NdA2xrjX1nyCXPhINu+okIEdcY5K
xqrSpx8DOGxJMTXR2RXa99JfmyhrJbAse9eSaEe/2hr04yafb+kRy3tLtjgv/zUo
L/Z/oJPnC1dBE7sINwnHiLjJwQgEy91o9tWgioIa1MGg3Za3aQ3dMhBS5gXq3Zu+
4dZM44RbyxVWq17TH8DQeaSaFg+nu/j/yOsB5Z33Z1M1Q1SjwaSbpZD2rccGb9kL
95vxch8WBLIyPSvLN9A4
=EOnb
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Final updates for v3.13
A few final updates for v3.13, all driver updates apart from some DPCM
and Coverity fixes which should have minor impact on practical systems.
* acpi-video:
ACPI: Add Toshiba NB100 to Vista _OSI blacklist
ACPI / video: Ignore BIOS initial backlight value for HP 250 G1
ACPI / video: Add Lenovo IdeaPad Yoga 13 to acpi video detect blacklist
thinkpad-acpi: fix handle locate for video and query of _BCL
ACPI / video: Do not register backlight if win8 and native interface exists
ACPI / video: seperate backlight control and event interface
backlight: introduce backlight_device_registered
ACPI: add missing win8 OSI comment to blacklist
ACPI: update win8 OSI blacklist
* acpi-conversion:
ACPI / AC: Remove AC's proc directory.
ideapad_laptop: convert ideapad device/driver to platform bus
ideapad_laptop: remove ideapad_handle and ideapad_priv
ideapad_laptop: convert internal function calls to use ideapad_private as parameter
ideapad_laptop: introduce struct acpi_device pointer to ideapad_private structure
ideapad_laptop: introduce #ifdef CONFIG_PM_SLEEP for PM specific code
ACPI / AC: convert ACPI ac driver to platform bus
Fix build error in asus_wmi.c when ASUS_WMI=y and ACPI_VIDEO=m
by preventing that combination.
drivers/built-in.o: In function `asus_wmi_probe':
asus-wmi.c:(.text+0x65ddb4): undefined reference to `acpi_video_unregister'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Do not touch keyboard backlight unless explicitly passed a module
parameter. In this way we won't make wrong assumptions about what are
good default values since they actually are different from model to
model.
The only side effect is that we won't know what is the current value
until set via the sysfs attributes.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mrst is used as common name to represent all intel_mid type
soc's. But moorsetwon is just one of the intel_mid soc. So
renamed them to use intel_mid.
This patch mainly renames the variables and related
functions that uses *mrst* prefix with *intel_mid*.
To ensure that there are no functional changes, I have compared
the objdump of related files before and after rename and found
the only difference is symbol and name changes.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-6-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Following files contains code that is common to all intel mid
soc's. So renamed them as below.
mrst/mrst.c -> intel-mid/intel-mid.c
mrst/vrtc.c -> intel-mid/intel_mid_vrtc.c
mrst/early_printk_mrst.c -> intel-mid/intel_mid_vrtc.c
pci/mrst.c -> pci/intel_mid_pci.c
Also, renamed the corresponding header files and made changes
to the driver files that included these header files.
To ensure that there are no functional changes, I have compared
the objdump of renamed files before and after rename and found
that the only difference is file name change.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-4-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The LEDs are currently not visible to userspace, for security
reasons. They are exported through thinkpad_acpi.h for use by the
snd-hda-intel driver.
Thanks to Alex Hung <alex.hung@canonical.com> and Takashi Iwai
<tiwai@suse.de> for writing parts of this patch.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The tpacpi_acpi_handle_locate function makes use of acpi_get_devices to
locate handle for ACPI video by HID, the problem is, ACPI video node
doesn't really have HID defined(i.e. no _HID control method is defined
for video device), so.. that function would fail. This can be solved by
enhancing the callback function for acpi_get_devices, where we can use
acpi_device_hid function to check if the ACPI node corresponds to a
video controller.
In addition to that, the _BCL control method only exists under a video
output device node, not a video controller device node. So to evaluate
_BCL, we need the handle of a video output device node, which is child
of the located video controller node from tpacpi_acpi_handle_locate.
The two fix are necessary for some Thinkpad models to emit notification
on backlight hotkey press as a result of evaluation of _BCL.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Tested-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch does two things,
1. enumerate the ideapad device node to platform bus.
2. convert the current driver from ACPI bus to platform bus.
Note, with this patch, the platform device node created by ACPI,
with the name VPC2004:00, is used as the parent device of
the input, backlight, rfkill sysfs class device.
Plus the ideapad_platform private sysfs attributes,
i.e. camera_power and fan_mode, are also moved to the new
platform device node.
The previous platform device node "ideapad" is removed.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
CC: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The current code use ideapad_handle and ideapad_priv to store
some information for the ideapad device.
But as they are global/static variables, the driver will be broken
if there are more than one ideapad ACPI device node on a platform.
Although this does not happen for now and may not happen in the future,
but still, this is a software bug.
Remove these two variables in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
CC: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As struct ideapad_private has all the information needed for any operations,
convert ideapad_register_rfkill()/ideapad_unregister_rfkill() and
ideapad_sync_touchpad_state() to use struct ideapad_private as the parameter,
to be consistent with the others.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
CC: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce struct acpi_device pointer to ideapad_private structure.
At the same time, replace all adevice with adev to be short and consistent.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
CC: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ideapad_acpi_resume() and ideapad_pm is meaningful
only if CONFIG_PM_SLEEP is set.
Thus introduce #ifdef for this piece of code.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
CC: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_evaluate_integer() is an ACPI API introduced to evaluate an
ACPI control method that is known to have an integer return value.
This API can simplify the code because the calling function does not need to
use the specified acpi_buffer structure required by acpi_evaluate_object();
Convert acpi_evaluate_object() to acpi_evaluate_integer()
in drivers/platform/x86/toshiba_acpi.c in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_evaluate_integer() is an ACPI API introduced to evaluate an
ACPI control method that is known to have an integer return value.
This API can simplify the code because the calling function does not need to
use the specified acpi_buffer structure required by acpi_evaluate_object();
Convert acpi_evaluate_object() to acpi_evaluate_integer()
in drivers/platform/x86/intel-smartconnect.c in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_evaluate_integer() is an ACPI API introduced to evaluate an
ACPI control method that is known to have an integer return value.
This API can simplify the code because the calling function does not need to
use the specified acpi_buffer structure required by acpi_evaluate_object();
Convert acpi_evaluate_object() to acpi_evaluate_integer()
in drivers/platform/x86/intel-rst.c in this patch.
Plus, this should also fix a memory leak that
the acpi_buffer is not freed in some cases.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_evaluate_integer() is an ACPI API introduced to evaluate an
ACPI control method that is known to have an integer return value.
This API can simplify the code because the calling function does not need to
use the specified acpi_buffer structure required by acpi_evaluate_object();
Convert acpi_evaluate_object() to acpi_evaluate_integer()
in drivers/platform/x86/fujitsu-laptop.c in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_has_method() is a new ACPI API introduced to check
the existence of an ACPI control method.
It can be used to replace acpi_get_handle() in the case that
1. the calling function doesn't need the ACPI handle of the control method.
and
2. the calling function doesn't care the reason why the method is unavailable.
Convert acpi_get_handle() to acpi_has_method()
in drivers/platform/x86/wmi.c in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_has_method() is a new ACPI API introduced to check
the existence of an ACPI control method.
It can be used to replace acpi_get_handle() in the case that
1. the calling function doesn't need the ACPI handle of the control method.
and
2. the calling function doesn't care the reason why the method is unavailable.
Convert acpi_get_handle() to acpi_has_method()
in drivers/platform/x86/toshiba_acpi.c in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_has_method() is a new ACPI API introduced to check
the existence of an ACPI control method.
It can be used to replace acpi_get_handle() in the case that
1. the calling function doesn't need the ACPI handle of the control method.
and
2. the calling function doesn't care the reason why the method is unavailable.
Convert acpi_get_handle() to acpi_has_method()
in drivers/platform/x86/sony-laptop.c in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
CC: Mattia Dongili <malattia@linux.it>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_has_method() is a new ACPI API introduced to check
the existence of an ACPI control method.
It can be used to replace acpi_get_handle() in the case that
1. the calling function doesn't need the ACPI handle of the control method.
and
2. the calling function doesn't care the reason why the method is unavailable.
Convert acpi_get_handle() to acpi_has_method()
in drivers/platform/x86/intel_menlow.c in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_has_method() is a new ACPI API introduced to check
the existence of an ACPI control method.
It can be used to replace acpi_get_handle() in the case that
1. the calling function doesn't need the ACPI handle of the control method.
and
2. the calling function doesn't care the reason why the method is unavailable.
Convert acpi_get_handle() to acpi_has_method()
in drivers/platform/x86/fujitsu-laptop.c in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_execute_simple_method() is a new ACPI API introduced to invoke
an ACPI control method that has single integer parameter and no return value.
Convert acpi_evaluate_object() to acpi_execute_simple_method()
in drivers/platform/x86/wmi.c
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_execute_simple_method() is a new ACPI API introduced to invoke
an ACPI control method that has single integer parameter and no return value.
Convert acpi_evaluate_object() to acpi_execute_simple_method()
in drivers/platform/x86/toshiba_acpi.c
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_execute_simple_method() is a new ACPI API introduced to invoke
an ACPI control method that has single integer parameter and no return value.
Convert acpi_evaluate_object() to acpi_execute_simple_method()
in drivers/platform/x86/topstar-laptop.c
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_execute_simple_method() is a new ACPI API introduced to invoke
an ACPI control method that has single integer parameter and no return value.
Convert acpi_evaluate_object() to acpi_execute_simple_method()
in drivers/platform/x86/intel-smartconnect.c
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_execute_simple_method() is a new ACPI API introduced to invoke
an ACPI control method that has single integer parameter and no return value.
Convert acpi_evaluate_object() to acpi_execute_simple_method()
in drivers/platform/x86/intel-rst.c
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_execute_simple_method() is a new ACPI API introduced to invoke
an ACPI control method that has single integer parameter and no return value.
Convert acpi_evaluate_object() to acpi_execute_simple_method()
in drivers/platform/x86/fujitsu-laptop.c
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_execute_simple_method() is a new ACPI API introduced to invoke
an ACPI control method that has single integer parameter and no return value.
Convert acpi_evaluate_object() to acpi_execute_simple_method()
in drivers/platform/x86/eeepc-laptop.c
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
CC: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull x86 platform updates from Matthew Garrett:
"Nothing amazing here, almost entirely cleanups and minor bugfixes and
one bit of hardware enablement in the amilo-rfkill driver"
* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
platform/x86: panasonic-laptop: reuse module_acpi_driver
samsung-laptop: fix config build error
platform: x86: remove unnecessary platform_set_drvdata()
amilo-rfkill: Enable using amilo-rfkill with the FSC Amilo L1310.
wmi: parse_wdg() should return kernel error codes
hp_wmi: Fix unregister order in hp_wmi_rfkill_setup()
platform: replace strict_strto*() with kstrto*()
x86: irst: use module_acpi_driver to simplify the code
x86: smartconnect: use module_acpi_driver to simplify the code
platform samsung-q10: use ACPI instead of direct EC calls
thinkpad_acpi: add the ability setting TPACPI_LED_NONE by quirk
thinkpad_acpi: return -NODEV while operating uninitialized LEDs
There is a macro to register and unregister modules in simple cases, Let's use
it and clean up the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Fix build failure when ACPI_VIDEO=m and SAMSUNG_LAPTOP=y.
The patch prevents that specific config combination.
drivers/built-in.o: In function `samsung_init':
samsung-laptop.c:(.init.text+0x128ff): undefined reference to `acpi_video_unregister'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
build testing:
ACPI_VIDEO=m, SAMSUNG_LAPTOP=m: OK
ACPI_VIDEO=y, SAMSUNG_LAPTOP=m: OK
ACPI_VIDEO=y, SAMSUNG_LAPTOP=y: OK
ACPI=n, SAMSUNG_LAPTOP=y: OK
ACPI=n, SAMSUNG_LAPTOP=m: OK
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This change extends the amilo_rfkill_id_table[] with the DMI_BOARD_NAME information of the Amilo L1310, so that the wifi device can be switched on.
Signed-off-by: Jerome Meinke <meinkej@informatik.uni-freiburg.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The current code returns a mix of acpi_status and kernel error codes.
It should just return kernel error codes. There are already error paths
in this function which return -ENOMEM and that's what the caller
expects.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Register order is:
wifi
bluetooth
wwan
gps
So unregister order must be:
gps
wwan
bluetiith
wifi
But currently gps and wwan are swapped. Fix that.
Also fix goto links.
Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
CC: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The usage of strict_strtoul() and strict_strtol() is not preferred,
because strict_strtoul() and strict_strtol() are obsolete. Thus,
kstrtoul() and kstrtol() should be used.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
module_acpi_driver() makes the code simpler by eliminating
boilerplate code.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
module_acpi_driver() makes the code simpler by eliminating
boilerplate code.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This patch changes the Samsung Q10 backlight driver to use ACPI methods
(the same ones as triggered by the brightness up/down function keys)
instead of direct EC calls. The advantage is that the brightness setting
is not lost on shutdown.
Signed-off-by: Frederick van der Wyck <fvanderwyck@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Some new Lenovo or ThinkPad laptops don't have EC controllable LEDs,
their LED quirks are 0. This patch set led_supported=TPACPI_LED_NONE
when quirk equals 0.
Signed-off-by: Adam Lee <adam.lee@canonical.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Not all 0-15 LEDs are available for all models, sometimes it's even not
safe. This patch return -NODEV while operating uninitialized LEDs.
Signed-off-by: Adam Lee <adam.lee@canonical.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages.
This has been sitting in linux-next for a whole cycle.
Thanks,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=LeaW
-----END PGP SIGNATURE-----
Merge tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull PTR_RET() removal patches from Rusty Russell:
"PTR_RET() is a weird name, and led to some confusing usage. We ended
up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages.
This has been sitting in linux-next for a whole cycle"
[ There are still some PTR_RET users scattered about, with some of them
possibly being new, but most of them existing in Rusty's tree too. We
have that
#define PTR_RET(p) PTR_ERR_OR_ZERO(p)
thing in <linux/err.h>, so they continue to work for now - Linus ]
* tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO
Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO
drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO
sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO
dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO
drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO
mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR().
staging/zcache: don't use PTR_RET().
remoteproc: don't use PTR_RET().
pinctrl: don't use PTR_RET().
acpi: Replace weird use of PTR_RET.
s390: Replace weird use of PTR_RET.
PTR_RET is now PTR_ERR_OR_ZERO(): Replace most.
PTR_RET is now PTR_ERR_OR_ZERO
1) ACPI-based PCI hotplug (ACPIPHP) subsystem rework and introduction
of Intel Thunderbolt support on systems that use ACPI for signalling
Thunderbolt hotplug events. This also should make ACPIPHP work in
some cases in which it was known to have problems. From
Rafael J Wysocki, Mika Westerberg and Kirill A Shutemov.
2) ACPI core code cleanups and dock station support cleanups from
Jiang Liu and Rafael J Wysocki.
3) Fixes for locking problems related to ACPI device hotplug from
Rafael J Wysocki.
4) ACPICA update to version 20130725 includig fixes, cleanups, support
for more than 256 GPEs per GPE block and a change to make the ACPI
PM Timer optional (we've seen systems without the PM Timer in the
field already). One of the fixes, related to the DeRefOf operator,
is necessary to prevent some Windows 8 oriented AML from causing
problems to happen. From Bob Moore, Lv Zheng, and Jung-uk Kim.
5) Removal of the old and long deprecated /proc/acpi/event interface
and related driver changes from Thomas Renninger.
6) ACPI and Xen changes to make the reduced hardware sleep work with
the latter from Ben Guthro.
7) ACPI video driver cleanups and a blacklist of systems that should
not tell the BIOS that they are compatible with Windows 8 (or ACPI
backlight and possibly other things will not work on them). From
Felipe Contreras.
8) Assorted ACPI fixes and cleanups from Aaron Lu, Hanjun Guo,
Kuppuswamy Sathyanarayanan, Lan Tianyu, Sachin Kamat, Tang Chen,
Toshi Kani, and Wei Yongjun.
9) cpufreq ondemand governor target frequency selection change to
reduce oscillations between min and max frequencies (essentially,
it causes the governor to choose target frequencies proportional
to load) from Stratos Karafotis.
10) cpufreq fixes allowing sysfs attributes file permissions to be
preserved over suspend/resume cycles Srivatsa S Bhat.
11) Removal of Device Tree parsing for CPU device nodes from multiple
cpufreq drivers that required some changes related to
of_get_cpu_node() to be made in a few architectures and in the
driver core. From Sudeep KarkadaNagesha.
12) cpufreq core fixes and cleanups related to mutual exclusion and
driver module references from Viresh Kumar, Lukasz Majewski and
Rafael J Wysocki.
13) Assorted cpufreq fixes and cleanups from Amit Daniel Kachhap,
Bartlomiej Zolnierkiewicz, Hanjun Guo, Jingoo Han, Joseph Lo,
Julia Lawall, Li Zhong, Mark Brown, Sascha Hauer, Stephen Boyd,
Stratos Karafotis, and Viresh Kumar.
14) Fixes to prevent race conditions in coupled cpuidle from happening
from Colin Cross.
15) cpuidle core fixes and cleanups from Daniel Lezcano and
Tuukka Tikkanen.
16) Assorted cpuidle fixes and cleanups from Daniel Lezcano,
Geert Uytterhoeven, Jingoo Han, Julia Lawall, Linus Walleij,
and Sahara.
17) System sleep tracing changes from Todd E Brandt and Shuah Khan.
18) PNP subsystem conversion to using struct dev_pm_ops for power
management from Shuah Khan.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=CgqW
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
1) ACPI-based PCI hotplug (ACPIPHP) subsystem rework and introduction
of Intel Thunderbolt support on systems that use ACPI for signalling
Thunderbolt hotplug events. This also should make ACPIPHP work in
some cases in which it was known to have problems. From
Rafael J Wysocki, Mika Westerberg and Kirill A Shutemov.
2) ACPI core code cleanups and dock station support cleanups from
Jiang Liu and Rafael J Wysocki.
3) Fixes for locking problems related to ACPI device hotplug from
Rafael J Wysocki.
4) ACPICA update to version 20130725 includig fixes, cleanups, support
for more than 256 GPEs per GPE block and a change to make the ACPI
PM Timer optional (we've seen systems without the PM Timer in the
field already). One of the fixes, related to the DeRefOf operator,
is necessary to prevent some Windows 8 oriented AML from causing
problems to happen. From Bob Moore, Lv Zheng, and Jung-uk Kim.
5) Removal of the old and long deprecated /proc/acpi/event interface
and related driver changes from Thomas Renninger.
6) ACPI and Xen changes to make the reduced hardware sleep work with
the latter from Ben Guthro.
7) ACPI video driver cleanups and a blacklist of systems that should
not tell the BIOS that they are compatible with Windows 8 (or ACPI
backlight and possibly other things will not work on them). From
Felipe Contreras.
8) Assorted ACPI fixes and cleanups from Aaron Lu, Hanjun Guo,
Kuppuswamy Sathyanarayanan, Lan Tianyu, Sachin Kamat, Tang Chen,
Toshi Kani, and Wei Yongjun.
9) cpufreq ondemand governor target frequency selection change to
reduce oscillations between min and max frequencies (essentially,
it causes the governor to choose target frequencies proportional
to load) from Stratos Karafotis.
10) cpufreq fixes allowing sysfs attributes file permissions to be
preserved over suspend/resume cycles Srivatsa S Bhat.
11) Removal of Device Tree parsing for CPU device nodes from multiple
cpufreq drivers that required some changes related to
of_get_cpu_node() to be made in a few architectures and in the
driver core. From Sudeep KarkadaNagesha.
12) cpufreq core fixes and cleanups related to mutual exclusion and
driver module references from Viresh Kumar, Lukasz Majewski and
Rafael J Wysocki.
13) Assorted cpufreq fixes and cleanups from Amit Daniel Kachhap,
Bartlomiej Zolnierkiewicz, Hanjun Guo, Jingoo Han, Joseph Lo,
Julia Lawall, Li Zhong, Mark Brown, Sascha Hauer, Stephen Boyd,
Stratos Karafotis, and Viresh Kumar.
14) Fixes to prevent race conditions in coupled cpuidle from happening
from Colin Cross.
15) cpuidle core fixes and cleanups from Daniel Lezcano and
Tuukka Tikkanen.
16) Assorted cpuidle fixes and cleanups from Daniel Lezcano,
Geert Uytterhoeven, Jingoo Han, Julia Lawall, Linus Walleij,
and Sahara.
17) System sleep tracing changes from Todd E Brandt and Shuah Khan.
18) PNP subsystem conversion to using struct dev_pm_ops for power
management from Shuah Khan.
* tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (217 commits)
cpufreq: Don't use smp_processor_id() in preemptible context
cpuidle: coupled: fix race condition between pokes and safe state
cpuidle: coupled: abort idle if pokes are pending
cpuidle: coupled: disable interrupts after entering safe state
ACPI / hotplug: Remove containers synchronously
driver core / ACPI: Avoid device hot remove locking issues
cpufreq: governor: Fix typos in comments
cpufreq: governors: Remove duplicate check of target freq in supported range
cpufreq: Fix timer/workqueue corruption due to double queueing
ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT
ACPI / thermal: Add check of "_TZD" availability and evaluating result
cpufreq: imx6q: Fix clock enable balance
ACPI: blacklist win8 OSI for buggy laptops
cpufreq: tegra: fix the wrong clock name
cpuidle: Change struct menu_device field types
cpuidle: Add a comment warning about possible overflow
cpuidle: Fix variable domains in get_typical_interval()
cpuidle: Fix menu_device->intervals type
cpuidle: CodingStyle: Break up multiple assignments on single line
cpuidle: Check called function parameter in get_typical_interval()
...
Here's the big driver core pull request for 3.12-rc1.
Lots of tiny changes here fixing up the way sysfs attributes are
created, to try to make drivers simpler, and fix a whole class race
conditions with creations of device attributes after the device was
announced to userspace.
All the various pieces are acked by the different subsystem maintainers.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.21 (GNU/Linux)
iEYEABECAAYFAlIlIPcACgkQMUfUDdst+ynUMwCaAnITsxyDXYQ4DqEsz8EcOtMk
718AoLrgnUZs3B+70AT34DVktg4HSThk
=USl9
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core patches from Greg KH:
"Here's the big driver core pull request for 3.12-rc1.
Lots of tiny changes here fixing up the way sysfs attributes are
created, to try to make drivers simpler, and fix a whole class race
conditions with creations of device attributes after the device was
announced to userspace.
All the various pieces are acked by the different subsystem
maintainers"
* tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (119 commits)
firmware loader: fix pending_fw_head list corruption
drivers/base/memory.c: introduce help macro to_memory_block
dynamic debug: line queries failing due to uninitialized local variable
sysfs: sysfs_create_groups returns a value.
debugfs: provide debugfs_create_x64() when disabled
rbd: convert bus code to use bus_groups
firmware: dcdbas: use binary attribute groups
sysfs: add sysfs_create/remove_groups for when SYSFS is not enabled
driver core: add #include <linux/sysfs.h> to core files.
HID: convert bus code to use dev_groups
Input: serio: convert bus code to use drv_groups
Input: gameport: convert bus code to use drv_groups
driver core: firmware: use __ATTR_RW()
driver core: core: use DEVICE_ATTR_RO
driver core: bus: use DRIVER_ATTR_WO()
driver core: create write-only attribute macros for devices and drivers
sysfs: create __ATTR_WO()
driver-core: platform: convert bus code to use dev_groups
workqueue: convert bus code to use dev_groups
MEI: convert bus code to use dev_groups
...
Merge fixes from Andrew Morton:
"A few fixes. One is a licensing change and I don't do licensing, so
please eyeball that one"
Licensing eye-balled.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
lib/lz4: correct the LZ4 license
memcg: get rid of swapaccount leftovers
nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection
nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error
drivers/platform/olpc/olpc-ec.c: initialise earlier
Being a low-level component, various drivers (e.g. olpc-battery) assume
that it is ok to communicate with the OLPC Embedded Controller during
probe. Therefore the OLPC EC driver must be initialised before other
drivers try to use it. This was the case until it was recently moved
out of arch/x86 and restructured around commits ac2504151f ("Platform:
OLPC: turn EC driver into a platform_driver") and 85f90cf6ca ("x86:
OLPC: switch over to using new EC driver on x86").
Use arch_initcall so that olpc-ec is readied earlier, matching the
previous behaviour.
Fixes a regression introduced in Linux-3.6 where various drivers such as
olpc-battery and olpc-xo1-sci failed to load due to an inability to
communicate with the EC. The user-visible effect was a lack of battery
monitoring, missing ebook/lid switch input devices, etc.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Cc: Andres Salomon <dilinger@queued.net>
Cc: Paul Fox <pgf@laptop.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The dev_attrs field of struct class is going away soon, dev_groups
should be used instead. This converts the wmi class code to use the
correct field.
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Return -1 in the error handling case instead of 0, as done elsewhere in
this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
It is somewhat strange that the default value to support the
depracated interface is set (1).
Anyway this has existed for years. The previous patch already
removed the functionality to still export events through /proc.
Now this param is useless and should vanish too.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Matthew Garrett <matthew.garrett@nebula.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is quite some time that this one has been deprecated.
Get rid of it.
Should some really important user be overseen, it may be reverted and
the userspace program worked on first, but it is time to do something
to get rid of this old stuff...
Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Matthew Garrett <matthew.garrett@nebula.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
when request_irq fails, we should release gpiochip
v2:
fix warning: ignoring return value of 'gpiochip_remove
Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Configuring this option as a module with ACPI_TOSHIBA built-in
results in the following errors:
drivers/built-in.o: In function `toshiba_acpi_remove':
>> toshiba_acpi.c:(.text+0x314bb0): undefined reference to `i8042_remove_filter'
drivers/built-in.o: In function `toshiba_acpi_add':
>> toshiba_acpi.c:(.devinit.text+0xb822): undefined reference to `i8042_install_filter'
>> toshiba_acpi.c:(.devinit.text+0xb98b): undefined reference to `i8042_remove_filter'
Add a dependency to prevent ACPI_TOSHIBA from being built-in when
SERIO_I8042=m.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Need to set wapf to 4 for ASUSTeK COMPUTER INC. 1015E/U, so that
user can toggle wifi function through function key correctly.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Intel Smart Connect is an Intel-specific ACPI interface for configuring
devices to wake up at regular intervals so they can pull down mail or other
internet updates, and then go to sleep again. If a user enables this in
Windows and then reboots into Linux, the device may wake up if it's put to
sleep. Since there's no Linux userland support for any of this, the machine
will then remain awake until something else puts it back to sleep.
I haven't figured out all that much about how this works (there's a bunch
of different ACPI calls available on the device), but this seems to be
enough to turn it off. We can add more features to this driver if anyone
ever cares about figuring out what the rest of the calls do or writing some
Linux userspace to implement the rest of it.
Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Intel Rapid Start Technology is a firmware-based suspend-to-disk
implementation. Once placed in S3, the device will wake once either a
timeout elapses or the battery reaches a critical level. It will then resume
to the firmware and copy the contents of RAM to a specialised partition, and
then power off the machine. If the user turns the machine back on the
firmware will copy the contents of the partition back to RAM and then resume
from S3 as normal.
This driver provides an interface for configuring the wakeup events and
timeout. It still requires firmware support and an appropriate suspend
partition.
Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
HP laptops include a POST code error query 0x2A that reports
which point BIOS fails to boot at. The error code is kept in CMOS
until it is cleared.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Controlling the wlan led seems to have some side effects to the machines
with wapf value is not equal to 4. It will make the keyboard backlight
out of order.
So, the patch will enable the wlan led function only if the wapf == 4.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=46791
Reported-by: Mirto Silvio Busico <m.busico@ieee.org>
Tested-by: Karol Herbst <karolherbst@me.com>
Tested-by: drunkenbatman <drunkenbatman@gmail.com>
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
use module_pci_driver instead of init/exit, make code clean.
Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
asus->name is null or point to const string,so it is not suitable to kfree it.
Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
1. fix two visible mistakes:
* when load_scm_model_init faild, we should call platform_device_del(msipf_device)
* msipf_attribute_group should be remove in err case
2. change some tags, give them real meaning.
Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
I forgot to add this when changing the driver to use the proper
i8042 functions.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Fix to return -ENOMEM in the alloc_page() error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Kyle Evans discovered that he needed to set some bits in an EC register in
order to receive hotkey events. Doing so blindly broke some otherwise
working HP laptops. It turns out that there's a WMI call that accesses
the same register, so let's try calling that instead.
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Cc: Kyle Evans <kvans32@gmail.com>
Calling dev_set_name with a single paramter causes it to be handled as a
format string. Many callers are passing potentially dynamic string
content, so use "%s" in those cases to avoid any potential accidents,
including wrappers like device_create*() and bdi_register().
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The patch adds support for fan control button on Ideapad Z580. This is
the same button as on Z570, but it raises different bit in
VPCCMD_R_SPECIAL_BUTTONS. Also add message to dmesg when unknown button
press detected, it will help adding support for new special buttons.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Tested-by: Ivan Vojtko <nekroman.sk@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
pvpanic device is a qemu simulated device through which guest panic
event is sent to host.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
BugLink: http://bugs.launchpad.net/bugs/1172151
Need to set wapf to 4 for ASUSTeK COMPUTER INC. X75A, so that
user can toggle wifi function through function key correctly.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Used PTR_RET function instead of IS_ERR and PTR_ERR.
Patch found using coccinelle.
Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
SVS151290S series uses handle 0x0163 for keyboard backlight and 0x015B for the graphics switch.
Signed-off-by: Arthur Wirski <awirski@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
New HP laptops start generating new events, and hp-wmi prints unknown
event_ids for them. This patch also removes these messages
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
If krealloc() returns NULL, it *doesn't* free the original. So any code
of the form 'foo = krealloc(foo, …);' is almost certainly a bug.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The error in lis3lv02_poweron() is harmless in the resume path, so
we should ignore it. It is inline with the other usages of lis3lv02_poweron()
and matches the 3.0 code for this routine. This patch is in suse git and
might have missed making it into the mainline.
opensuse - commit id: 66ccdac87c322cf7af12bddba8c805af640b1cff
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Shuah Khan <shuah.khan@hp.com>
CC: stable@vger.kernel.org 3.8, 3.4, 3.5, 3.2
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
There is a new DELL WMI spec. with new WMI event format.
I'm working on the AIO machines, but I think the new format will apply to
all the Dell's machines, not only for AIO, which will be released later
this year.
The new format of the WMI buffer is shown as below
word 0 - the number of words following in the WMI buffer(not including
this word.
word 1 - the event type
0x0000 - A hot key is pressed or an event occurred
0x000F - A sequence of hot keys are pressed
word 2 and on - the event data
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Pull VFS updates from Al Viro,
Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).
7kloc removed.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
don't bother with deferred freeing of fdtables
proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
proc: Make the PROC_I() and PDE() macros internal to procfs
proc: Supply a function to remove a proc entry by PDE
take cgroup_open() and cpuset_open() to fs/proc/base.c
ppc: Clean up scanlog
ppc: Clean up rtas_flash driver somewhat
hostap: proc: Use remove_proc_subtree()
drm: proc: Use remove_proc_subtree()
drm: proc: Use minor->index to label things, not PDE->name
drm: Constify drm_proc_list[]
zoran: Don't print proc_dir_entry data in debug
reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
proc: Supply an accessor for getting the data from a PDE's parent
airo: Use remove_proc_subtree()
rtl8192u: Don't need to save device proc dir PDE
rtl8187se: Use a dir under /proc/net/r8180/
proc: Add proc_mkdir_data()
proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
proc: Move PDE_NET() to fs/proc/proc_net.c
...
* acpica: (33 commits)
ACPICA: Update version to 20130328
ACPICA: Add a lock to the internal object reference count mechanism
ACPICA: Fix a format string for 64-bit generation
ACPICA: Remove FORCE_DELETE option for global reference count mechanism
ACPICA: Improve error message for Index() operator
ACPICA: FADT: Remove extraneous warning for very large GPE registers
ACPICA: Fix a typo in a function header, no functional change
ACPICA: Fix a typo in an error message
ACPICA: Fix for some comments/headers
ACPICA: _OSI Support: handle any errors from acpi_os_acquire_mutex()
ACPICA: Predefine names: Add allowed argument types to master info table
ACPI: Set length even for TYPE_END_TAG acpi resource
ACPICA: Update version to 20130214
ACPICA: Object repair: Allow 0-length packages for variable-length packages
ACPICA: Disassembler: Add warnings for unresolved control methods
ACPICA: Return object repair: Add resource template repairs
ACPICA: Return object repair: Add string-to-unicode conversion
ACPICA: Split object conversion functions to a new file
ACPICA: Add mechanism for early object repairs on a per-name basis
ACPICA: Remove trailing comma in enum declarations
...
Pull x86 platform driver revert from Matthew Garrett:
"It turns out that one of the hp-wmi patches this cycle breaks some
other HP laptops. I think we have a good idea how to work on it for
3.10, but it's safer to just revert it for now."
* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
Revert "hp-wmi: Add support for SMBus hotkeys"
This reverts commit fabf85e3ca which breaks
hotkey support on some other HP laptops. We'll try doing this differently
in 3.10.
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
hotkey_kthread() does try_to_freeze() under hotkey_thread_mutex.
We can simply kill this mutex, hotkey_poll_stop_sync() does not need to
serialize with hotkey_kthread(). When kthread_stop() returns the thread
is already dead, it called do_exit()->complete_vfork_done().
Reported-by: Artem Savkov <artem.savkov@gmail.com>
Reported-by: Maciej Rutecki <maciej.rutecki@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Reviewed-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The only part of proc_dir_entry the code outside of fs/proc
really cares about is PDE(inode)->data. Provide a helper
for that; static inline for now, eventually will be moved
to fs/proc, along with the knowledge of struct proc_dir_entry
layout.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Found with a network device in QEMU/KVM guest not working anymore.
Bisected to commit c13085e5
ACPICA: Resource Mgr: Prevent infinite loops in resource walks
That commit will check acpi_resource length strictly which causes
acpi_set_current_resources to return failure and IRQ for PCI
devices is not set properly.
Set length for all those TYPE_END_TAG acpi_resources.
[rjw: Changelog]
Bisected-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add basic platform data to get the current upstream driver working
with the 224s touchpad and 1664s touchscreen.
We will be using NULL config so we will use the settings from the
devices' NVRAMs.
Signed-off-by: Benson Leung <bleung@chromium.org>
Tested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 platform driver updates from Matthew Garrett:
"Mostly relatively small updates, along with some hardware enablement
for Sony hardware and a pile of updates to Google's Chromebook driver"
* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (49 commits)
ideapad-laptop: Depend on BACKLIGHT_CLASS_DEVICE instead of selecting it
ideapad: depends on backlight subsystem and update comment
Platform: x86: chromeos_laptop - add i915 gmbuses to adapter names
Platform: x86: chromeos_laptop - Add isl light sensor for Pixel
Platform: x86: chromeos_laptop - Add a more general add_i2c_device
Platform: x86: chromeos_laptop - Add Pixel Touchscreen
Platform: x86: chromeos_laptop - Add support for probing devices
Platform: x86: chromeos_laptop - Add Pixel Trackpad
hp-wmi: fix handling of platform device
sony-laptop: leak in error handling sony_nc_lid_resume_setup()
hp-wmi: Add support for SMBus hotkeys
asus-wmi: Fix unused function build warning
acer-wmi: avoid the warning of 'devices' may be used uninitialized
drivers/platform/x86/thinkpad_acpi.c: Handle HKEY event 0x6040
Platform: x86: chromeos_laptop - Add HP Pavilion 14
Platform: x86: chromeos_laptop - Add Taos tsl2583 device
Platform: x86: chromeos_laptop - Add Taos tsl2563 device
Platform: x86: chromeos_laptop - Add Acer C7 trackpad
Platform: x86: chromeos_laptop - Rename setup_lumpy_tp to setup_cyapa_smbus_tp
asus-laptop: always report brightness key events
...
Selecting BACKLIGHT_CLASS_DEVICE doesn't guarantee that any of its
dependencies are enabled, and these are complicated. Depending isn't ideal
for configuration UI purposes, but is probably more appropriate here.
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
I've got a report of build failure on ideapad-laptop, which shows
drivers/built-in.o: In function `ideapad_acpi_notify':
ideapad-laptop.c:(.text+0x63876a): undefined reference to `backlight_force_update'
drivers/built-in.o: In function `ideapad_acpi_remove':
ideapad-laptop.c:(.devexit.text+0x64a7): undefined reference to `backlight_device_unregister'
drivers/built-in.o: In function `ideapad_acpi_add':
ideapad-laptop.c:(.devinit.text+0x45e28): undefined reference to `backlight_device_register'
To select backlight subsystem can prevent this error from happening.
Also update comment for this driver.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Add the two other i2c buses (vga and panel) from i915.
Chromebook Pixel has input and light sensor devices on these busses.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The Chromebook Pixel uses an isl29023 ambient light sensor on the PANEL
GMBus.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This will allow us to assign devices to buses by the type enum.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Instantiate the atmel mxt1664s touchscreen on this system.
The touchscreen may appear at two possible addresses:
0x4a in operational mode.
0x26 in bootloader mode.
Signed-off-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This will allow support for devices that may appear at more than
one i2c address at boot time. The specific example is the atmel_mxt touch
devices, which may appear at a different address if it comes up
in bootloader mode.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Instantiate the atmel mxt224s trackpad on this system.
The trackpad may appear at two possible addresses:
0x4b in operational mode.
0x25 in bootloader mode.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The driver will not quite work if someone unbinds the platform device
from the platform driver via sysfs (moreover it will bomb is the driver
built into the kernel as hp_wmi_bios_remove is marked as __exit and will
not be present in the kernel).
To fix it let's use platform_driver_probe() instead of
platform_driver_register(), which disables binding/unbinding via sysfs.
This also allows us to mark hp_wmi_bios_setup as __init and discard it
once module is initialized.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
We need to decrement "i" first because the current "i" was not allocated
succesfully. Also we should go free the way down to zero to avoid a
leak.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Several models of HP laptops using the same DSDT have hotkey buttons
that do not work until the EC is configured to enable them.
Signed-off-by: Kyle Evans <kvans32@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Fix the following build warning
CC [M] drivers/platform/x86/asus-wmi.o
drivers/platform/x86/asus-wmi.c:1356:13: warning: ‘do_nothing’ defined but not used [-Wunused-function]
Signed-off-by: Shuah Khan <shuah.khan@hp.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Fengguang Wu run kernel build test to platform-drivers-x86/linux-next git tree
on x86_64 architecture and found a warning that was introduced by
727651bf738b6b917335025d09323d0962eda114 commit:
drivers/platform/x86/acer-wmi.c: In function âWMID_set_capabilitiesâ:
drivers/platform/x86/acer-wmi.c:1211: warning: âdevicesâ may be used
uninitialized in this function
This patch fixes the above warning message.
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Add support for the HP Pavilion 14 Chromebook's trackpad, which is a reuse
of the Samsung Series 5 550 trackpad.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The Samsung Series 5 Chromebook is equipped with a Taos tsl2583
light sensor. Instatiate it here.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Two legacy Chromebooks, the Cr-48, and the Acer AC700,
are equipped with a Taos tsl2563 light sensor.
This will instantiate the sensor on those laptops.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Add support for the Acer C7's trackpad, which is a reuse
of the Samsung Series 5 550 trackpad.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The Cypress trackpad on smbus is used on other systems
as well. Lets make the name more generic.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Z series and other recent models have 0x14? for lid and keyboard
backlight.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The call to handlers 0x124 and 0x135 (rfkill control) seems to take a
bitmask to control various states of the device. For our rfkill we need
a fully on/off. SVZ1311Z9R/X's LTE modem needs more bits up.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47751
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Cc: stable@kernel.org
Pull vfs pile (part one) from Al Viro:
"Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
locking violations, etc.
The most visible changes here are death of FS_REVAL_DOT (replaced with
"has ->d_weak_revalidate()") and a new helper getting from struct file
to inode. Some bits of preparation to xattr method interface changes.
Misc patches by various people sent this cycle *and* ocfs2 fixes from
several cycles ago that should've been upstream right then.
PS: the next vfs pile will be xattr stuff."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
saner proc_get_inode() calling conventions
proc: avoid extra pde_put() in proc_fill_super()
fs: change return values from -EACCES to -EPERM
fs/exec.c: make bprm_mm_init() static
ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
ocfs2: fix possible use-after-free with AIO
ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
target: writev() on single-element vector is pointless
export kernel_write(), convert open-coded instances
fs: encode_fh: return FILEID_INVALID if invalid fid_type
kill f_vfsmnt
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
nfsd: handle vfs_getattr errors in acl protocol
switch vfs_getattr() to struct path
default SET_PERSONALITY() in linux/elf.h
ceph: prepopulate inodes only when request is aborted
d_hash_and_lookup(): export, switch open-coded instances
9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
9p: split dropping the acls from v9fs_set_create_acl()
...
This adds the chromeos_laptop driver. It supports
the Cypress APA SMBUS touchpad as well as the isl29018 i2c ambient
light sensor on the Samsung Series 5 550 Chromebook.
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The new B series BIOS has version string 43CN46WW. The driver
requires that 2nd and 3rd characters be 'E' and 'T' respectively,
where as the newer BIOS has 'C' and 'N' respectively. Failing to
load the module causes some of the hotkeys to not work.
Before the patch
================
sudo modprobe thinkpad_acpi
FATAL: Error inserting thinkpad_acpi (/lib/modules/3.5.0-15-generic/kernel/drivers/platform/x86/thinkpad_acpi.ko): No such device
After the patch
===============
[44937.265438] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[44937.265445] thinkpad_acpi: http://ibm-acpi.sf.net/
[44937.265449] thinkpad_acpi: ThinkPad BIOS 43CN46WW, EC unknown
[44937.265453] thinkpad_acpi: Lenovo Lenovo B470e, model HuronRiver Platform
[44937.266479] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[44937.266557] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[44937.267846] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[44937.268131] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input17
Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com>
Tested-by: James Ferguson <james.ferguson@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Add rfkill support for the GPS radio found in HP laptops (HP Elitebook 2170p and the like)
using the Ericsson F5321/H5321 Mobile Broadband Module.
Signed-off-by: Viliam Trepák <trepo@netcomga.sk>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Found another Lenovo ideapad S205 the product name is 1038DPG, it has
a 0x78 EC register exposes the state of wifi hardware switch on the machine.
So, add this patch to support Lenovo ideapad S205-1038DPG wifi hardware
switch in acer-wmi driver.
Evidently the Ideapad S205 is just a model name on the market, but they have
totally different product name in DMI table.
Reference: bko#43007
https://bugzilla.kernel.org/show_bug.cgi?id=43007
Tested-by: Colin <colin.newell@gmail.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Found another Lenovo ideapad S205 the product name is 10382JG, it has
a 0x78 EC register exposes the state of wifi hardware switch on the machine.
So, add this patch to support Lenovo ideapad S205-10382JG wifi hardware
switch in acer-wmi driver.
Evidently the Ideapad S205 is just a model name on the market, but they have
totally different product name in DMI table.
Reference: bko#43007
https://bugzilla.kernel.org/show_bug.cgi?id=43007
Tested-by: Ivo Anjo <knuckles@gmail.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Fill up all the video switch keys in the map.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
For machines with AMD graphic chips, it will send out WMI event and ACPI
interrupt at the same time while hitting the hotkey. BIOS will notify the
system the next display output mode throught WMI event code, so that
windows' application can show an OSD to tell the user which mode will be
taken effect. User can hit the display toggle key many times within 2
seconds to choose the mode they want. After 2 seconds, WMI dirver should
send a WMIMethod(SDSP) command to tell the BIOS which mode the user chose.
And then BIOS will raise another ACPI interrupt to tell the system to
really switch the display mode.
In Linux desktop, we don't have this kind of OSD to let users to choose
the mode they want, so we don't need to call WMIMethod(SDSP) to have
another ACPI interrupt. To simplify the problem, we just have to ignore
the WMI event, and let the first ACPI interrupt to send out the key event.
For the need, here comes another quirk to add machines with this kind of
behavior. When the WMI driver receives the display toggle WMI event, and
found the machin is in the list, it will do nothing and let ACPI video
driver to report the key event.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Fill up all the video switch keys in the map.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
0x60 is touchpad enable key, but is misdefined in the keymap.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
0x60 is touchpad enable key, but is misdefined in the keymap.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Maybe this should be shared in another module...
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Add MSI Wind support to msi-wmi driver. MSI Wind has different GUID for
key events, different WMI key scan codes, it does not need filtering
consecutive identical events and it does not support backlight control
via MSIWMI_BIOS_GUID WMI. Tested on MSI Wind U100.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Introduced quirk_last_pressed variable that would indicate if
last_pressed is used or not. Also converted last_pressed to simple
variable in order to allow keymap to be non-contiguous.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Introduced function msi_wmi_backlight_setup() that initializes backlight
device. Made driver load and work if only one WMI (only for hotkeys or
only for backlight) is present.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Use enums for consecutive scancodes, rename key names from MSI_WMI_* to
MSI_KEY_* and use tabs for whitespace in msi_wmi_keymap.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Acked-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
It seems that existing brightness control works only for old EC models.
On newer ones auto_brightness access always timeouts and lcd_level
always shows 0. So disable brightness control for new EC models. It
works fine with ACPI video driver anyway.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Add MSI Wind U90/U100 to DMI table and add some missing EC features
support such as basic fan control, turbo and ECO modes and touchpad
state. Tested on MSI Wind U100.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This patch introduced a quirk_entry struct, then we merged all quirk
tables to msi_dmi_table. Then we can more easily to set different quirk
attributes for different machine.
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Changed this patch so that it could be applied before MSI Wind U100
support patch. Changed rfkill logic for ec_read_only quirk support.
Removed delays if ec_delay = false.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Acked-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Assign initial value to variable in order to prevent gcc warning about
uninitialized variable.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Use proper function return codes instead of -1
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
For those machines with wapf=4, BIOS won't update the wireless LED,
since wapf=4 means user application will take in chage of the wifi and bt.
So, we have to update wlan LED status explicitly.
But I found there is another wireless LED bug in launchpad and which is
not in the wapf=4 quirk.
So, it might be better to set wireless LED status explicitly for all
machines.
BugLink: https://launchpad.net/bugs/901105
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Here's the big staging tree merge for 3.9-rc1
Lots of cleanups and updates for drivers all through the staging tree.
We are pretty much "code neutral" here, adding just about as many lines
as we removed.
All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEUEABECAAYFAlEmW7QACgkQMUfUDdst+ymlIACXT5mv8Y5A/KJa+QLTNNsofI8u
aACgq9hNZxJzX6VQMLXUV8+2SILOqYo=
=5wIj
-----END PGP SIGNATURE-----
Merge tag 'staging-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree update from Greg Kroah-Hartman:
"Here's the big staging tree merge for 3.9-rc1
Lots of cleanups and updates for drivers all through the staging tree.
We are pretty much "code neutral" here, adding just about as many
lines as we removed.
All of these have been in linux-next for a while."
* tag 'staging-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (804 commits)
staging: comedi: vmk80xx: wait for URBs to complete
staging: comedi: drivers: addi-data: hwdrv_apci3200.c: Add a missing semicolon
staging: et131x: Update TODO list
staging: et131x: Remove assignment of skb->dev
staging: wlan-ng: hfa384x.h: fix for error reported by smatch
staging/zache checkpatch ERROR: spaces prohibited around that
staging/ozwpan: Mark read only parameters and structs as const
staging/ozwpan: Remove empty and unused function oz_cdev_heartbeat
staging/ozwpan: Mark local functions as static (fix sparse warnings)
staging/ozwpan: Add missing header includes
staging/usbip: Mark local functions as static (fix sparse warnings)
staging/xgifb: Remove duplicated code in loops.
staging/xgifb: Consolidate return paths
staging/xgifb: Remove code without effect
staging/xgifb: Remove unnecessary casts
staging/xgifb: Consolidate if/else if with identical code branches
staging: vt6656: replaced custom TRUE definition with true
staging: vt6656: replaced custom FALSE definition with false
staging: vt6656: replace custom BOOL definition with bool
staging/rtl8187se: Mark functions as static to silence sparse
...
Here is the big driver core merge for 3.9-rc1
There are two major series here, both of which touch lots of drivers all
over the kernel, and will cause you some merge conflicts:
- add a new function called devm_ioremap_resource() to properly be
able to check return values.
- remove CONFIG_EXPERIMENTAL
If you need me to provide a merged tree to handle these resolutions,
please let me know.
Other than those patches, there's not much here, some minor fixes and
updates.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlEmV0cACgkQMUfUDdst+yncCQCfbmnQZju7kzWXk6PjdFuKspT9
weAAoMCzcAtEzzc4LXuUxxG/sXBVBCjW
=yWAQ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core patches from Greg Kroah-Hartman:
"Here is the big driver core merge for 3.9-rc1
There are two major series here, both of which touch lots of drivers
all over the kernel, and will cause you some merge conflicts:
- add a new function called devm_ioremap_resource() to properly be
able to check return values.
- remove CONFIG_EXPERIMENTAL
Other than those patches, there's not much here, some minor fixes and
updates"
Fix up trivial conflicts
* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
base: memory: fix soft/hard_offline_page permissions
drivercore: Fix ordering between deferred_probe and exiting initcalls
backlight: fix class_find_device() arguments
TTY: mark tty_get_device call with the proper const values
driver-core: constify data for class_find_device()
firmware: Ignore abort check when no user-helper is used
firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
firmware: Make user-mode helper optional
firmware: Refactoring for splitting user-mode helper code
Driver core: treat unregistered bus_types as having no devices
watchdog: Convert to devm_ioremap_resource()
thermal: Convert to devm_ioremap_resource()
spi: Convert to devm_ioremap_resource()
power: Convert to devm_ioremap_resource()
mtd: Convert to devm_ioremap_resource()
mmc: Convert to devm_ioremap_resource()
mfd: Convert to devm_ioremap_resource()
media: Convert to devm_ioremap_resource()
iommu: Convert to devm_ioremap_resource()
drm: Convert to devm_ioremap_resource()
...
- Rework of the ACPI namespace scanning code from Rafael J. Wysocki
with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
Toshi Kani, and Yinghai Lu.
- ACPI power resources handling and ACPI device PM update from
Rafael J. Wysocki.
- ACPICA update to version 20130117 from Bob Moore and Lv Zheng
with contributions from Aaron Lu, Chao Guan, Jesper Juhl, and
Tim Gardner.
- Support for Intel Lynxpoint LPSS from Mika Westerberg.
- cpuidle update from Len Brown including Intel Haswell support, C1
state for intel_idle, removal of global pm_idle.
- cpuidle fixes and cleanups from Daniel Lezcano.
- cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri
with contributions from Stratos Karafotis and Rickard Andersson.
- Intel P-states driver for Sandy Bridge processors from
Dirk Brandewie.
- cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.
- cpufreq fixes related to ordering issues between acpi-cpufreq and
powernow-k8 from Borislav Petkov and Matthew Garrett.
- cpufreq support for Calxeda Highbank processors from Mark Langsdorf
and Rob Herring.
- cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
from Shawn Guo.
- cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
and Inderpal Singh.
- Support for "lightweight suspend" from Zhang Rui.
- Removal of the deprecated power trace API from Paul Gortmaker.
- Assorted updates from Andreas Fleig, Colin Ian King,
Davidlohr Bueso, Joseph Salisbury, Kees Cook, Li Fei,
Nishanth Menon, ShuoX Liu, Srinivas Pandruvada, Tejun Heo,
Thomas Renninger, and Yasuaki Ishimatsu.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=wijn
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
- Rework of the ACPI namespace scanning code from Rafael J. Wysocki
with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
Toshi Kani, and Yinghai Lu.
- ACPI power resources handling and ACPI device PM update from Rafael
J Wysocki.
- ACPICA update to version 20130117 from Bob Moore and Lv Zheng with
contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner.
- Support for Intel Lynxpoint LPSS from Mika Westerberg.
- cpuidle update from Len Brown including Intel Haswell support, C1
state for intel_idle, removal of global pm_idle.
- cpuidle fixes and cleanups from Daniel Lezcano.
- cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with
contributions from Stratos Karafotis and Rickard Andersson.
- Intel P-states driver for Sandy Bridge processors from Dirk
Brandewie.
- cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.
- cpufreq fixes related to ordering issues between acpi-cpufreq and
powernow-k8 from Borislav Petkov and Matthew Garrett.
- cpufreq support for Calxeda Highbank processors from Mark Langsdorf
and Rob Herring.
- cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
from Shawn Guo.
- cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
and Inderpal Singh.
- Support for "lightweight suspend" from Zhang Rui.
- Removal of the deprecated power trace API from Paul Gortmaker.
- Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso,
Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu,
Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki
Ishimatsu.
* tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits)
PM idle: remove global declaration of pm_idle
unicore32 idle: delete stray pm_idle comment
openrisc idle: delete pm_idle
mn10300 idle: delete pm_idle
microblaze idle: delete pm_idle
m32r idle: delete pm_idle, and other dead idle code
ia64 idle: delete pm_idle
cris idle: delete idle and pm_idle
ARM64 idle: delete pm_idle
ARM idle: delete pm_idle
blackfin idle: delete pm_idle
sparc idle: rename pm_idle to sparc_idle
sh idle: rename global pm_idle to static sh_idle
x86 idle: rename global pm_idle to static x86_idle
APM idle: register apm_cpu_idle via cpuidle
cpufreq / intel_pstate: Add kernel command line option disable intel_pstate.
cpufreq / intel_pstate: Change to disallow module build
tools/power turbostat: display SMI count by default
intel_idle: export both C1 and C1E
ACPI / hotplug: Fix concurrency issues and memory leaks
...
Added support for IT8771E, IT8772E, MAX34460, MAX34461, MCP98244,
and ADT7420 to existing drivers.
Added support for additional attributes to various drivers.
Replaced SENSORS_LIMIT with clamp_val; retire SENSORS_LIMIT;
Clean up PMBus code to reduce its size; clean up adt7410 driver.
A couple of minor bug fixes as well as documentation cleanup.
Out-of-tree change: Replace SENSORS_LIMIT with clamp_val in
platform/x86/eeepc-laptop driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=OTEn
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
- New drivers for MAX6697 and compatibles and for INA209.
- Added support for IT8771E, IT8772E, MAX34460, MAX34461, MCP98244, and
ADT7420 to existing drivers.
- Added support for additional attributes to various drivers.
- Replaced SENSORS_LIMIT with clamp_val; retire SENSORS_LIMIT;
- Clean up PMBus code to reduce its size; clean up adt7410 driver.
- A couple of minor bug fixes as well as documentation cleanup.
- Out-of-tree change: Replace SENSORS_LIMIT with clamp_val in
platform/x86/eeepc-laptop driver.
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (32 commits)
hwmon: (ntc_thermistor): Fix sparse warnings
hwmon: (adt7410) Add device table entry for the adt7420
hwmon: (adt7410) Use I2C_ADDRS helper macro
hwmon: (adt7410) Use the SIMPLE_DEV_PM_OPS helper macro
hwmon: (adt7410) Let suspend/resume depend on CONFIG_PM_SLEEP
hwmon: (adt7410) Clear unwanted bits in the config register
hwmon: (jc42) Add support for MCP98244
hwmon: (pmbus) Clean up for code size reduction
hwmon: (pmbus/max34440) Add support for MAX34460 and MAX34461
hwmon: (pmbus) Add support for word status register
hwmon: (pmbus/zl6100) Add support for VMON/VDRV
hwmon: (pmbus) Add function to clear sensor cache
hwmon: (pmbus) Add support for additional voltage sensor
hwmon: (pmbus) Use krealloc to allocate attribute memory
hwmon: (pmbus) Simplify memory allocation for sensor attributes
hwmon: (pmbus) Improve boolean handling
hwmon: (pmbus) Simplify memory allocation for labels and booleans
hwmon: (pmbus) Use dev variable to represent client->dev
hwmon: (pmbus) Fix 'Macros with multiple statements' checkpatch error
hwmon: (pmbus) Drop unnecessary error messages in probe error path
...
Pull workqueue [delayed_]work_pending() cleanups from Tejun Heo:
"This is part of on-going cleanups to remove / minimize usages of
workqueue interfaces which are deprecated and/or misleading.
This round drops a number of usages of [delayed_]work_pending(), which
are dangerous as they lack any form of synchronization and thus often
lead to buggy / unnecessary code. There are a couple legitimate use
cases in kernel. Hopefully, they can be converted and
[delayed_]work_pending() can be removed completely. Even if not,
removing most of misuses should make it more difficult to find
examples of misuses and thus slow down growth of them.
These changes are independent from other workqueue changes."
* 'for-3.9-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
wimax/i2400m: fix i2400m->wake_tx_skb handling
kprobes: fix wait_for_kprobe_optimizer()
ipw2x00: simplify scan_event handling
video/exynos: don't use [delayed_]work_pending()
tty/max3100: don't use [delayed_]work_pending()
x86/mce: don't use [delayed_]work_pending()
rfkill: don't use [delayed_]work_pending()
wl1251: don't use [delayed_]work_pending()
thinkpad_acpi: don't use [delayed_]work_pending()
mwifiex: don't use [delayed_]work_pending()
sja1000: don't use [delayed_]work_pending()
* acpi-cleanup: (21 commits)
ACPI / hotplug: Fix concurrency issues and memory leaks
ACPI: Remove the use of CONFIG_ACPI_CONTAINER_MODULE
ACPI / scan: Full transition to D3cold in acpi_device_unregister()
ACPI / scan: Make acpi_bus_hot_remove_device() acquire the scan lock
ACPI: Drop the container.h header file
ACPI / Documentation: refer to correct file for acpi_platform_device_ids[] table
ACPI / scan: Make container driver use struct acpi_scan_handler
ACPI / scan: Remove useless #ifndef from acpi_eject_store()
ACPI: Unbind ACPI drv when probe failed
ACPI: sysfs eject support for ACPI scan handlers
ACPI / scan: Follow priorities of IDs when matching scan handlers
ACPI / PCI: pci_slot: replace printk(KERN_xxx) with pr_xxx()
ACPI / dock: Fix acpi_bus_get_device() check in drivers/acpi/dock.c
ACPI / scan: Clean up acpi_bus_get_parent()
ACPI / platform: Use struct acpi_scan_handler for creating devices
ACPI / PCI: Make PCI IRQ link driver use struct acpi_scan_handler
ACPI / PCI: Make PCI root driver use struct acpi_scan_handler
ACPI / scan: Introduce struct acpi_scan_handler
ACPI / scan: Make scanning of fixed devices follow the general scheme
ACPI: Drop device start operation that is not used
...
It has been reported that running this driver on some Samsung laptops
with EFI can cause those machines to become bricked as detailed in the
following report,
https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557
There have also been reports of this driver causing Machine Check
Exceptions on recent EFI-enabled Samsung laptops,
https://bugzilla.kernel.org/show_bug.cgi?id=47121
So disable it if booting from EFI since this driver relies on
grovelling around in the BIOS memory map which isn't going to work.
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Steve Langasek <steve.langasek@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Originally 'efi_enabled' indicated whether a kernel was booted from
EFI firmware. Over time its semantics have changed, and it now
indicates whether or not we are booted on an EFI machine with
bit-native firmware, e.g. 64-bit kernel with 64-bit firmware.
The immediate motivation for this patch is the bug report at,
https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557
which details how running a platform driver on an EFI machine that is
designed to run under BIOS can cause the machine to become
bricked. Also, the following report,
https://bugzilla.kernel.org/show_bug.cgi?id=47121
details how running said driver can also cause Machine Check
Exceptions. Drivers need a new means of detecting whether they're
running on an EFI machine, as sadly the expression,
if (!efi_enabled)
hasn't been a sufficient condition for quite some time.
Users actually want to query 'efi_enabled' for different reasons -
what they really want access to is the list of available EFI
facilities.
For instance, the x86 reboot code needs to know whether it can invoke
the ResetSystem() function provided by the EFI runtime services, while
the ACPI OSL code wants to know whether the EFI config tables were
mapped successfully. There are also checks in some of the platform
driver code to simply see if they're running on an EFI machine (which
would make it a bad idea to do BIOS-y things).
This patch is a prereq for the samsung-laptop fix patch.
Cc: David Airlie <airlied@linux.ie>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Peter Jones <pjones@redhat.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Steve Langasek <steve.langasek@canonical.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Konrad Rzeszutek Wilk <konrad@kernel.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
SENSORS_LIMIT and clamp_val have the same functionality, so retire SENSORS_LIMIT
as it is no longer needed.
The change reduces text size by 26 bytes and bss size by 16 bytes on x86_86
builds.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
The second argument of ACPI driver .remove() operation is only used
by the ACPI processor driver and the value passed to that driver
through it is always available from the given struct acpi_device
object's removal_type field. For this reason, the second ACPI driver
.remove() argument is in fact useless, so drop it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Note a point in the pipe driver that wants future attention
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A QEMU pipe is a very fast communication channel between the
guest system and the emulator. Usage from the guest is simply
something like;
// connect to special device
fd = open("/dev/qemu_pipe", O_RDWR);
// tell which service we want to talk to (must be zero-terminated)
write(fd, "pipeName", strlen("pipeName")+1);
// do read()/write() through fd now
...
// close channel
close(fd);
Signed-off-by: David 'Digit' Turner <digit@android.com>
[Added support for parameter buffers for speed]
igned-off-by: Xin, Xiaohui <xiaohui.xin@intel.com>
Signed-off-by: Jiang, Yunhong <yunhong.jiang@intel.com>
Signed-off-by: Nakajima, Jun <jun.nakajima@intel.com>
[Ported to 3.6]
Signed-off-by: Tom Keel <thomas.keel@intel.com>
[Ported to 3.7, moved to platform/goldfish]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This imports the current Google code and cleans it up slightly to use pr_ and
to properly request its resources.
Goldfish is an emulator used for Android development. It has a virtual bus where
the emulator passes platform device information to the guest which then creates
the appropriate devices.
This part of the emulation is not architecture specific so should not be hiding
in architecture trees as it does in the Google Android tree. The constants it
uses do depend on the platform and the platform creates the bus device which then
talks to the emulator to ascertain the actual devices present.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: Xiaohui Xin <xiaohui.xin@intel.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Bruce Beare <bruce.j.beare@intel.com>
[Moved out of x86, cleaned up headers]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 0-day build testing backend noticed that a string could be dereferenced
without validation. Fix that.
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Since commit 8871e99f89 ('asus-laptop: HRWS/HWRS typo'), module
initialisation is very slow on the Asus UL30A. The HWRS method takes
about 12 seconds to run, and subsequent initialisation also seems to
be delayed. Since we don't really need the result, don't bother
calling it on init. Those who are curious can still get the result
through the 'infos' device attribute.
Update the comment about HWRS in show_infos().
Reported-by: ryan <draziw+deb@gmail.com>
References: http://bugs.debian.org/692436
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
SN06 in some cases returns an Integer instead of a buffer. While the
code handling the return value was trying to cope with the difference,
the memcpy call was not making any difference between the two types of
acpi_object union. This regression was introduced in 3.5.
While there also rework the return value logic to improve readability.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=48671
Cc: <stable@vger.kernel.org>
Cc: Fabrizio Narni <shibotto@gmail.com>
Cc: <mus.svz@gmail.com>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
KEY_TOUCHPAD_TOOGLE key is for notice userland change touchpad state
via xf86-input-synaptics on the machine that don't toggle touchpad in
hardware. But, acer laptop actually toggle touchpad in hardware.
So, this patch change to emit KEY_TOUCHPAD_ON/OFF key when acer-wmi grab
device state of touchpad.
Reference: brc#848270
https://bugzilla.redhat.com/show_bug.cgi?id=848270
Tested-by: Nathanael Noblet <nathanael@gnat.ca>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Fengguang Wu run coccinelle and warns about:
drivers/platform/x86/acer-wmi.c:1200:17-21: ERROR: obj is NULL but dereferenced.
drivers/platform/x86/acer-wmi.c:891:17-21: ERROR: obj is NULL but dereferenced.
drivers/platform/x86/acer-wmi.c:1953:17-21: ERROR: obj is NULL but dereferenced.
It causes by the code in patch 987dfbaa65 doesn't check
obj variable should not be NULL. There have risk for dereference a NULL obj, so add
this patch to fix.
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Joey Lee <jlee@novell.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Peter Feuerer <peter@piie.net>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Cc: Robert Gerlach <khnz@gmx.de>
Cc: Ike Panhc <ike.pan@canonical.com>
Cc: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no need to test whether a (delayed) work item in pending
before queueing, flushing or cancelling it. Most uses are unnecessary
and quite a few of them are buggy.
Remove unnecessary pending tests from thinkpad_acpi. Only compile
tested.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: ibm-acpi-devel@lists.sourceforge.net
Cc: platform-driver-x86@vger.kernel.org
This patch adds the thermal zone parameter as an argument to
the tzd_register() function call; and updates other drivers
using this function.
Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Conflicts:
drivers/staging/omap-thermal/omap-thermal-common.
OMAP supplied dummy TC1 and TC2,
at the same time that the thermal tree removed them
from thermal_zone_device_register()
drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
propogate the upstream MAX_IDR_LEVEL re-name
to prevent a build failure
Previously-fixed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Len Brown <len.brown@intel.com>
Pul ACPI & Power Management updates from Len Brown:
- acpidump utility added
- intel_idle driver now supports IVB Xeon
- turbostat utility can now count SMIs
- ACPI can now bind to USB3 hubs
- misc fixes
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (49 commits)
ACPI: Add new sysfs interface to export device description
ACPI: Harden acpi_table_parse_entries() against BIOS bug
tools/power/turbostat: add option to count SMIs, re-name some options
tools/power turbostat: add [-d MSR#][-D MSR#] options to print counter deltas
intel_idle: enable IVB Xeon support
tools/power turbostat: add [-m MSR#] option
tools/power turbostat: make -M output pretty
tools/power turbostat: print more turbo-limit information
tools/power turbostat: delete unused line
tools/power turbostat: run on IVB Xeon
tools/power/acpi/acpidump: create acpidump(8), local make install targets
tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfs
ACPI: run _OSC after ACPI_FULL_INITIALIZATION
tools/power/acpi/acpidump: create acpidump(8), local make install targets
tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfs
tools/power/acpi/acpidump: version 20071116
tools/power/acpi/acpidump: version 20070714
tools/power/acpi/acpidump: version 20060606
tools/power/acpi/acpidump: version 20051111
xo15-ebook: convert to module_acpi_driver()
...
Pull workqueue changes from Tejun Heo:
"This is workqueue updates for v3.7-rc1. A lot of activities this
round including considerable API and behavior cleanups.
* delayed_work combines a timer and a work item. The handling of the
timer part has always been a bit clunky leading to confusing
cancelation API with weird corner-case behaviors. delayed_work is
updated to use new IRQ safe timer and cancelation now works as
expected.
* Another deficiency of delayed_work was lack of the counterpart of
mod_timer() which led to cancel+queue combinations or open-coded
timer+work usages. mod_delayed_work[_on]() are added.
These two delayed_work changes make delayed_work provide interface
and behave like timer which is executed with process context.
* A work item could be executed concurrently on multiple CPUs, which
is rather unintuitive and made flush_work() behavior confusing and
half-broken under certain circumstances. This problem doesn't
exist for non-reentrant workqueues. While non-reentrancy check
isn't free, the overhead is incurred only when a work item bounces
across different CPUs and even in simulated pathological scenario
the overhead isn't too high.
All workqueues are made non-reentrant. This removes the
distinction between flush_[delayed_]work() and
flush_[delayed_]_work_sync(). The former is now as strong as the
latter and the specified work item is guaranteed to have finished
execution of any previous queueing on return.
* In addition to the various bug fixes, Lai redid and simplified CPU
hotplug handling significantly.
* Joonsoo introduced system_highpri_wq and used it during CPU
hotplug.
There are two merge commits - one to pull in IRQ safe timer from
tip/timers/core and the other to pull in CPU hotplug fixes from
wq/for-3.6-fixes as Lai's hotplug restructuring depended on them."
Fixed a number of trivial conflicts, but the more interesting conflicts
were silent ones where the deprecated interfaces had been used by new
code in the merge window, and thus didn't cause any real data conflicts.
Tejun pointed out a few of them, I fixed a couple more.
* 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits)
workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending()
workqueue: use cwq_set_max_active() helper for workqueue_set_max_active()
workqueue: introduce cwq_set_max_active() helper for thaw_workqueues()
workqueue: remove @delayed from cwq_dec_nr_in_flight()
workqueue: fix possible stall on try_to_grab_pending() of a delayed work item
workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback()
workqueue: use __cpuinit instead of __devinit for cpu callbacks
workqueue: rename manager_mutex to assoc_mutex
workqueue: WORKER_REBIND is no longer necessary for idle rebinding
workqueue: WORKER_REBIND is no longer necessary for busy rebinding
workqueue: reimplement idle worker rebinding
workqueue: deprecate __cancel_delayed_work()
workqueue: reimplement cancel_delayed_work() using try_to_grab_pending()
workqueue: use mod_delayed_work() instead of __cancel + queue
workqueue: use irqsafe timer for delayed_work
workqueue: clean up delayed_work initializers and add missing one
workqueue: make deferrable delayed_work initializer names consistent
workqueue: cosmetic whitespace updates for macro definitions
workqueue: deprecate system_nrt[_freezable]_wq
workqueue: deprecate flush[_delayed]_work_sync()
...
Remove tc1/tc2 in generic thermal layer.
.get_trend() callback starts to take effect from this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Valentin, Eduardo <eduardo.valentin@ti.com>
set upper and lower limits when binding
a thermal cooling device to a thermal zone device.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Herton R. Krzesinski <herton@canonical.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Len Brown <len.brown@intel.com>
The acpi_evalf() function modifies four bytes of data but in
fan_get_status() we pass a pointer to u8. I have modified the
function to use type checking now.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Fix a device reference count leakage issue in function
eeepc_rfkill_hotplug().
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
MODULE_PARM_DESC for wlan_status is further in the same file
Signed-off-by: Maxim A. Nikulin <M.A.Nikulin@gmail.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This function fails to add the start address of the gmux I/O range to
the requested port address and thus writes to the wrong location.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Study of Apple's binary driver revealed that the GMUX_READ_PORT should
be written between calls to gmux_index_wait_ready and
gmux_index_wait_complete (i.e., the new index protocol must be
followed). If this is not done correctly, the indexed
gmux device only partially accepts writes which lead to problems
concerning GPU switching. Special thanks to Seth Forshee who helped
greatly with identifying unnecessary changes.
Signed-off-by: Bernhard Froemel <froemel@vmars.tuwien.ac.at>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This patch extracts and displays version information from the indexed
gmux device as it is also done for the classic gmux device.
Signed-off-by: Bernhard Froemel <froemel@vmars.tuwien.ac.at>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The patch adds support for Lenovo IdeaPad Z570 laptop. It makes all special
keys working, adds possibility to control fan like Windows does, controls
Touchpad Disabled LED, toggles touchpad state via keyboard controller and
corrects touchpad behavior on resume from suspend. It is new, modified
version of patch. Now it does not depend on psmouse and does not need patching
of input subsystem.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
This is the part 3 for fan control
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The patch adds support for Lenovo IdeaPad Z570 laptop. It makes all special
keys working, adds possibility to control fan like Windows does, controls
Touchpad Disabled LED, toggles touchpad state via keyboard controller and
corrects touchpad behavior on resume from suspend. It is new, modified
version of patch. Now it does not depend on psmouse and does not need patching
of input subsystem.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
This is part 2 for touchpad toggle
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The patch adds support for Lenovo IdeaPad Z570 laptop. It makes all special
keys working, adds possibility to control fan like Windows does, controls
Touchpad Disabled LED, toggles touchpad state via keyboard controller and
corrects touchpad behavior on resume from suspend. It is new, modified
version of patch. Now it does not depend on psmouse and does not need patching
of input subsystem.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
This is part 1 for special button handling.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Due to commit cdda911c34 evdev only
becomes readable when the buffer contains an EV_SYN/SYN_REPORT event.
So in order to read the tablet sensor data as it happens we need to
ensure that we always call input_sync() after input_report_switch()
Signed-off-by: Carlos Alberto Lopez Perez <clopez@igalia.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
In the latest V-series bios DMI_PRODUCT_VERSION does not contain
the string Lenovo or Thinkpad, but is set to the model number, this
causes the thinkpad_acpi module to fail to load. Recognize laptop
as Lenovo using DMI_BIOS_VENDOR instead, which is set to Lenovo.
Test on V490u
=============
== After the patch ==
[ 1350.295757] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 1350.295760] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 1350.295761] thinkpad_acpi: ThinkPad BIOS H7ET21WW (1.00 ), EC unknown
[ 1350.295763] thinkpad_acpi: Lenovo LENOVO, model LV5DXXX
[ 1350.296086] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 1350.296694] thinkpad_acpi: radio switch found; radios are enabled
[ 1350.296703] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 1350.306466] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 1350.307082] Registered led device: tpacpi::thinklight
[ 1350.307215] Registered led device: tpacpi::power
[ 1350.307255] Registered led device: tpacpi::standby
[ 1350.307294] Registered led device: tpacpi::thinkvantage
[ 1350.308160] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 1350.308333] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 1350.312287] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input14
== Before the patch ==
sudo modprobe thinkpad_acpi
FATAL: Error inserting thinkpad_acpi (/lib/modules/3.2.0-27-generic/kernel/drivers/platform/x86/thinkpad_acpi.ko): No such device
Test on B485
=============
This patch was also test in a B485 where the thinkpad_acpi module does not
have any issues loading. But, I tested it to make sure this patch does not
break on already functioning models of Lenovo products.
[13486.746359] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[13486.746364] thinkpad_acpi: http://ibm-acpi.sf.net/
[13486.746368] thinkpad_acpi: ThinkPad BIOS HJET15WW(1.01), EC unknown
[13486.746373] thinkpad_acpi: Lenovo Lenovo LB485, model 814TR01
[13486.747300] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[13486.752435] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[13486.752883] Registered led device: tpacpi::thinklight
[13486.752915] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[13486.753216] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[13486.757147] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input15
Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Fixed the typo introduced from the below commit
5f1e88f dell-laptop: Add 6 machines to touchpad led quirk
Reported-by: Carlos Alberto Lopez Perez <clopez@igalia.com>
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add support for the gmux display muxing functionality and register a mux
handler with vga_switcheroo.
Signed-off-by: Andreas Heider <andreas@meetr.de>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Fix the dependencies of apple-gmux to prevent it from being built-in
when one or more of its dependencies is built as a module. Otherwise it
can fail to build due to missing symbols.
v2: Add dependency on ACPI to fix build failure when ACPI=n
Reported-by: Arun Raghavan <arun.raghavan@collabora.co.uk>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
If the user bit is set, that mean BIOS can't set and record the wlan
status, it will report the value read from id ASUS_WMI_DEVID_WLAN_LED
(0x00010012) while we query the wlan status by id ASUS_WMI_DEVID_WLAN
(0x00010011) through WMI.
So, we have to record wlan status in id ASUS_WMI_DEVID_WLAN_LED
(0x00010012) while setting the wlan status through WMI.
This is also the behavior that windows app will do.
Quote from ASUS application engineer
===
When you call WMIMethod(DSTS, 0x00010011) to get WLAN status, it may return
(1) 0x00050001 (On)
(2) 0x00050000 (Off)
(3) 0x00030001 (On)
(4) 0x00030000 (Off)
(5) 0x00000002 (Unknown)
(1), (2) means that the model has hardware GPIO for WLAN, you can call
WMIMethod(DEVS, 0x00010011, 1 or 0) to turn WLAN on/off.
(3), (4) means that the model doesn’t have hardware GPIO, you need to use
API or driver library to turn WLAN on/off, and call
WMIMethod(DEVS, 0x00010012, 1 or 0) to set WLAN LED status.
After you set WLAN LED status, you can see the WLAN status is changed with
WMIMethod(DSTS, 0x00010011). Because the status is recorded lastly
(ex: Windows), you can use it for synchronization.
(5) means that the model doesn’t have WLAN device.
WLAN is the ONLY special case with upper rule.
For other device, like Bluetooth, you just need use
WMIMethod(DSTS, 0x00010013) to get, and WMIMethod(DEVS, 0x00010013, 1 or 0)
to set.
===
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
We were only calling acpi_video_unregister() if ACPI video support was built
in, not if it was a module.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
New gmux devices have a different method for accessing the registers.
Update the driver to cope. Incorporates feedback from Bernhard Froemel.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Bernhard Froemel <froemel@vmars.tuwien.ac.at>
Cc: Seth Forshee <seth.forshee@canonical.com>
Move the special-cased backlight update function to a generic gmux_write32
function.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Seth Forshee <seth.forshee@canonical.com>
Convert delayed_work users doing cancel_delayed_work() followed by
queue_delayed_work() to mod_delayed_work().
Most conversions are straight-forward. Ones worth mentioning are,
* drivers/edac/edac_mc.c: edac_mc_workq_setup() converted to always
use mod_delayed_work() and cancel loop in
edac_mc_reset_delay_period() is dropped.
* drivers/platform/x86/thinkpad_acpi.c: No need to remember whether
watchdog is active or not. @fan_watchdog_active and related code
dropped.
* drivers/power/charger-manager.c: Seemingly a lot of
delayed_work_pending() abuse going on here.
[delayed_]work_pending() are unsynchronized and racy when used like
this. I converted one instance in fullbatt_handler(). Please
conver the rest so that it invokes workqueue APIs for the intended
target state rather than trying to game work item pending state
transitions. e.g. if timer should be modified - call
mod_delayed_work(), canceled - call cancel_delayed_work[_sync]().
* drivers/thermal/thermal_sys.c: thermal_zone_device_set_polling()
simplified. Note that round_jiffies() calls in this function are
meaningless. round_jiffies() work on absolute jiffies not delta
delay used by delayed_work.
v2: Tomi pointed out that __cancel_delayed_work() users can't be
safely converted to mod_delayed_work(). They could be calling it
from irq context and if that happens while delayed_work_timer_fn()
is running, it could deadlock. __cancel_delayed_work() users are
dropped.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Roland Dreier <roland@kernel.org>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
According to compiler warnings, quite some suspend/resume functions
in platform x86 drivers are not used for CONFIG_PM_SLEEP unset, so
add #ifdefs to prevent them from being built in that case.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Populate olpc_ec_priv with variables that were previously global. This
makes things a tad bit clearer, IMO.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Paul Fox <pgf@laptop.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
There's nothing about the debugfs interface for the EC driver that is
architecture-specific, so move it into the arch-independent driver.
The code is mostly unchanged with the exception of renamed variables, coding
style changes, and API updates.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Paul Fox <pgf@laptop.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
This uses the new EC driver framework in drivers/platform/olpc. The
XO-1 and XO-1.5-specific code is still in arch/x86, but the generic stuff
(including a new workqueue; no more running EC commands with IRQs disabled!)
can be shared with other architectures.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Paul Fox <pgf@laptop.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
A problem we've noticed on XO-1.75 is when we suspend in the middle of
an EC command. Don't allow that.
In the process, create a private object for the generic EC driver to use;
we have a framework for passing around a struct, use that rather than a
proliferation of global variables.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Paul Fox <pgf@laptop.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
The 1.75-based OLPC EC driver already does this; let's do it for all EC
drivers. This gives us nice suspend/resume hooks, amongst other things.
We want to run the EC's suspend hooks later than other drivers (which may
be setting wakeup masks or be running EC commands). We also want to run
the EC's resume hooks earlier than other drivers (which may want to run EC
commands).
Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Paul Fox <pgf@laptop.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
This provides a new API allows different OLPC architectures to override the
EC driver. x86 and ARM OLPC machines use completely different EC backends.
The olpc_ec_cmd is synchronous, and waits for the workqueue to send the
command to the EC. Multiple callers can run olpc_ec_cmd() at once, and
they will by serialized and sleep while only one executes on the EC at a time.
We don't provide an unregister function, as that doesn't make sense within
the context of OLPC machines - there's only ever 1 EC, it's critical to
functionality, and it certainly not hotpluggable.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Paul Fox <pgf@laptop.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Switch over to using olpc-ec.h in multiple steps, so as not to break builds.
This covers every driver that calls olpc_ec_cmd().
Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Paul Fox <pgf@laptop.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
The OLPC EC driver has outgrown arch/x86/platform/. It's time to both
share common code amongst different architectures, as well as move it out
of arch/x86/. The XO-1.75 is ARM-based, and the EC driver shares a lot of
code with the x86 code.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Paul Fox <pgf@laptop.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Pull x86 platform driver updates from Matthew Garrett:
"Nothing overly dramatic here - improved support for the Classmate,
some random small fixes and a rework of backlight management to deal
with some of the more awkward cases."
* 'linux-next' of git://cavan.codon.org.uk/platform-drivers-x86:
thinkpad_acpi: Free hotkey_keycode_map after unregistering tpacpi_inputdev
thinkpad_acpi: Fix a memory leak during module exit
thinkpad_acpi: Flush the workqueue before freeing tpacpi_leds
dell-laptop: Add 6 machines to touchpad led quirk
ACER: Fix Smatch double-free issue
ACER: Fix up sparse warning
asus-nb-wmi: add some video toggle keys
asus-nb-wmi: add wapf quirk for ASUS machines
classmate-laptop: Fix extra keys hardware id.
classmate-laptop: Add support for Classmate V4 accelerometer.
asus-wmi: enable resume on lid open
asus-wmi: control backlight power through WMI, not ACPI
samsung-laptop: support R40/R41
acpi/video_detect: blacklist samsung x360
samsung-laptop: X360 ACPI backlight device is broken
drivers-platform-x86: use acpi_video_dmi_promote_vendor()
acpi: add a way to promote/demote vendor backlight drivers
ACER: Add support for accelerometer sensor
asus-wmi: use ASUS_WMI_METHODID_DSTS2 as default DSTS ID.
We should free the thinkpad_id.nummodel_str during exit as it's allocated
in get_thinkpad_module_data().
Signed-off-by: Li Dongyang <Jerry87905@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The patch 6ae3a0876185: "ACER: Add support for accelerometer sensor"
from Jun 1, 2012, leads to the following Smatch warning:
drivers/platform/x86/acer-wmi.c:1886 acer_wmi_accel_destroy()
error: don't call input_free_device() after input_unregister_device()
drivers/platform/x86/acer-wmi.c
1883 static void acer_wmi_accel_destroy(void)
1884 {
1885 input_unregister_device(acer_wmi_accel_dev);
1886 input_free_device(acer_wmi_accel_dev);
1887 }
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Fengguang Wu <wfg@linux.intel.com>
Cc: joeyli <jlee@suse.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
There are some new video switch keys that used by newer machines.
0xA0 - SDSP HDMI only
0xA1 - SDSP LCD + HDMI
0xA2 - SDSP CRT + HDMI
0xA3 - SDSP TV + HDMI
But in Linux, there is no suitable userspace application to handle this,
so, mapping them all to KEY_SWITCHVIDEOMODE.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The BIOS of these machines will try to enable/disable wifi/bt in
their own sqeuence. It won't read the enable/disable parameter
in WMI command, but just iterates the wifi/bt's status described below
1st. enable wifi, enable bt
2nd. disable wifi, enable bt
3rd. enable wifi, disable bt
4th. disable wifi, disable bt
That will totally mess up the rfkill status, since we will try to read
wifi and bt's status and reset it again while booting up.
To avoid this, these machines should set the wapf value to 4,
that will let software totally control the wifi/bt's status and
BIOS will do nothing instead of sending out the 0x88(KEY_RFKILL) event
instead of 0x5e(wifi enable), 0x5f(wifi diable), 0x7d(bt enable), and
0x7e(bt disable) through WMI.
With this patch[1], it will handle the KEY_RFKILL event correctly and
will block/unblock wifi and bt together.
1. https://lkml.org/lkml/2012/5/21/75
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Since ACPI devices ids were changed to use always upper-case letters, the ACPI
id of the extra keys (FNBT0000) was not maching the one defined in the driver
(FnBT0000), causing the extra keys not to work.
The patch replaces the driver id with the one reported by ACPI, fixing the
problem.
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Classmate V4 laptop includes a new accelerometer that can't be handled by
previous driver. This patch adds a new driver to handle it.
[mjg: Fixed up the driver pm stuff]
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
According to the ASUS WMI spec., to enable resume on lid open should
use the device ID(0x00120032), but it doesn't work indeed.
After discussing with ASUS' BIOS engineer, they say wake on lid open
doesn't have a uniq device ID(0x00120032) in the BIOS. It shares the same
device ID with deep S3(0x00120031), and the deep S3(resume on lid open)
is disable by default.
Adding this option in asus wmi sysfs
/sys/devices/platform/<platform>/lid_resume
so that userspace apps can enable/disable this feature by themselves.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
BugLink: https://bugs.launchpad.net/bugs/1000146
Some h/w that can adjust screen brightness through ACPI functions, but
can't turn on/off the backlight power correctly. So, we list those h/w in
quirks and try to turn on/off the backlight power through WMI.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
> Chassis Information
> Manufacturer: SAMSUNG ELECTRONICS CO., LTD.
> Type: Other
Type should be "Notebook", "Laptop", .. not "Other".
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Instead of using directly acpi_video_unregister(), use
acpi_video_dmi_promote_vendor() (and make it call
acpi_video_unregister() if needed)
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This device is present on Iconia Tab W500.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: joeyli <jlee@suse.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Alex Hung