All SPEAr SoC's contain PLLs. Their Fout is derived based on following equations
- In normal mode
vco = (2 * M[15:8] * Fin)/N
- In Dithered mode
vco = (2 * M[15:0] * Fin)/(256 * N)
pll_rate = vco/2^p
vco and pll are very closely bound to each other,
"vco needs to program: mode, m & n" and "pll needs to program p",
both share common enable/disable logic and registers.
This patch adds in support for this type of clock.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Reviewed-by: Mike Turquette <mturquette@linaro.org>
Rewrite mxs_dma_is_apbh and mxs_dma_is_apbx in order to support
other SoCs like imx6q and reform the platform_device_id for the
better further dt support.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Huang Shijie <b32955@freescale.com>
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
It adds initial device tree support for imx23-evk board, and only
serial console is enabled.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
This patch includes basic dt support which can boot via nfs rootfs.
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Shawn Guo <shawn.guo@linaro.org> writes:
mxs common clk porting for v3.5. It depends on the following two branches.
[1] git://git.linaro.org/people/mturquette/linux.git clk-next
[2] http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-arm.git clkdev
As the mxs device tree conversion will constantly touch clock files,
to save the conflicts, the updated mxs/dt branch coming later will
based on this pull-request.
* 'clk/mxs' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: mxs: remove now unused timer_clk argument from mxs_timer_init
ARM: mxs: remove old clock support
ARM: mxs: switch to common clk framework
ARM: mxs: change the lookup name for fec phy clock
ARM: mxs: request clock for timer
clk: mxs: add clock support for imx28
clk: mxs: add clock support for imx23
clk: mxs: add mxs specific clocks
Includes an update to Linux 3.4-rc6
Conflicts:
drivers/clk/Makefile
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Having fixed factors/dividers in hardware is a common pattern, so
add a basic clock type doing this. It basically describes a fixed
factor clock using a nominator and a denominator.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Viresh Kumar <viresh.kumar@st.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
[mturquette@linaro.org: constify parent_names in static init macro]
[mturquette@linaro.org: copy/paste bug from mux in static init macro]
[mturquette@linaro.org: fix error handling in clk_register_fixed_factor]
[mturquette@linaro.org: improve division accuracy; thanks to Saravana]
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The original conversion to struct clk_hw_init failed to add the pointer
assignment in clk_register_mux.
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Reported-by: Sascha Hauer <s.hauer@pengutronix.de>
Exposing this option generates confusion and incorrect behavior for
single-image builds across platforms. Enable this behavior permanently.
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Saravana Kannan <skannan@codeaurora.org>
Patch 'clk: always pass parent_rate into .round_rate' made a subtle
change to the semantics of .round_rate. It is now expected for the
parent's rate to always be passed in, simplifying the implemenation of
various .round_rate callback definitions.
However the patch also introduced a bug in clk_calc_new_rates whereby a
clock without the CLK_SET_RATE_PARENT flag set could still propagate a
rate change up to a parent clock if the the .round_rate callback
modified the &best_parent_rate value in any way.
This patch fixes the issue at the framework level (in
clk_calc_new_rates) by specifically handling the case where the
CLK_SET_RATE_PARENT flag is not set.
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
With old mxs clock support removed, the timer_clk argument of
mxs_timer_init is unused now, so remove it.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The common clock framework allocates clocks dynamically. Provide a
set of helpers to streamline the clkdev registration of the clock
lookups to avoid repetitive code sequences.
Reviewed-by: Viresh Kumar <viresh.kumar@st.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This is well documented but isn't implemented. clk_set_rate() must check if
flags have CLK_SET_RATE_GATE bit set and is enabled too.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Create a struct clk_init_data to hold all data that needs to be passed from
the platfrom specific driver to the common clock framework during clock
registration. Add a pointer to this struct inside clk_hw.
This has several advantages:
* Completely hides struct clk from many clock platform drivers and static
clock initialization code that don't care for static initialization of
the struct clks.
* For platforms that want to do complete static initialization, it removed
the need to directly mess with the struct clk's fields while still
allowing to statically allocate struct clk. This keeps the code more
future proof even if they include clk-private.h.
* Simplifies the generic clk_register() function and allows adding optional
fields in the future without modifying the function signature.
* Simplifies the static initialization of clocks on all platforms by
removing the need for forward delcarations or convoluted macros.
Signed-off-by: Saravana Kannan <skannan@codeaurora.org>
[mturquette@linaro.org: kept DEFINE_CLK_* macros and __clk_init]
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Jeremy Kerr <jeremy.kerr@canonical.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergman <arnd.bergmann@linaro.org>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Shawn Guo <shawn.guo@freescale.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: Richard Zhao <richard.zhao@linaro.org>
Cc: Saravana Kannan <skannan@codeaurora.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Amit Kucheria <amit.kucheria@linaro.org>
Cc: Deepak Saxena <dsaxena@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Using the common clock infrastructure without the common clkdev code makes
little sense, so select CLKDEV_LOOKUP for COMMON_CLK.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
if (!clk->ops->round_rate && (clk->flags & CLK_SET_RATE_PARENT)) is true, then
we don't need to set clk->new_rate here, as we will call clk_calc_subtree()
afterwards and it also sets clk->new_rate.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This patch tries to remove duplicate code for clk_gate clocks. This creates
another routine clk_gate_endisable() which will take care of enable/disable
clock with knowledge of CLK_GATE_SET_TO_DISABLE flag.
It works on following logic:
For enabling clock, enable = 1
set2dis = 1 -> clear bit -> set = 0
set2dis = 0 -> set bit -> set = 1
For disabling clock, enable = 0
set2dis = 1 -> set bit -> set = 1
set2dis = 0 -> clear bit -> set = 0
So, result is always: enable xor set2dis.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Need to propagate round_rate call for the clk that has no .round_rate
operation but with flag CLK_SET_RATE_PARENT set.
For example, clk_mux is a clk with no .round_rate operation. However,
it could likely be in a clk_set_rate propagation path, saying it has
parent clk who has .round_rate and .set_rate operations.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
For most of .set_rate implementation, parent_rate will be used, so just
like passing parent_rate into .recalc_rate, let's pass parent_rate into
.set_rate too.
It also updates the kernel doc for .set_rate ops.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The parent_rate will likely be used by most .round_rate implementation
no matter whether flag CLK_SET_RATE_PARENT is set or not, so let's
always pass parent_rate into .round_rate.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This patch is the basic clk version of 'clk: core: copy parent_names &
return error codes'.
The registration functions are changed to allow the core code to copy
the array of strings and allow platforms to declare those arrays as
__initdata.
This patch also converts all of the basic clk registration functions to
return error codes which better aligns them with the existing clk.h api.
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This patch cleans up clk_register and solves a few bugs by teaching
clk_register and __clk_init to return error codes (instead of just NULL)
to better align with the existing clk.h api.
Along with that change this patch also introduces a new behavior whereby
clk_register copies the parent_names array, thus allowing platforms to
declare their parent_names arrays as __initdata.
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Drivers should be able to declare their arrays of parent names as const
so the APIs need to accept const arguments.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[mturquette@linaro.org: constified gate]
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Most users of clk_get_rate() actually assume a non zero
return value as a valid rate returned. Returing -EINVAL
might confuse such users, so make it instead return zero
on error.
Besides the return value of clk_get_rate seems to be
'unsigned long'.
Signed-off-by: Rajendra nayak <rnayak@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The clk_ops of basic clks should have "const" to match the definition
in "struct clk" and clk_register prototype.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
It makes no sense to have EXPORT_SYMBOL_GPL on static functions.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Change clk_register_mux to use kzalloc, just like what all other basic
clk registration functions do.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Documentation/clk.txt has some handsome ASCII art outlining which
clk_ops are mandatory for a given clock, given the capability of the
hardware. Enforce those mandates with sanity checks in __clk_init.
Signed-off-by: Mike Turquette <mturquette@linaro.org>
It is possible to call clk_set_rate on a clock with a NULL parent. One
such example is an adjustable-rate root clock. Ensure that
clk_calc_new_rates does not dereference parent without checking first
and also handle the corner cases gracefully.
Reported-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Some static inline dummy functions were left over from before the clock
core was consolidated from several C files down to one. Remove them.
Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Remove old and misleading documentation from the previous clk_set_rate
implementaion.
Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
clk_find must return as soon as it gets the correct clock. Currently it check
all clocks until it found a lookup with both dev_id and con_id matching.
If only one of them is passed, then we don't actually need to wait for both of
them to match. We can quit as soon as the requested id (dev_id or con_id)
matches.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Allow clk API users to simplify their cleanup paths by providing a
managed version of clk_get() and clk_put().
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
All platforms that use the common clk infrastructure should select
COMMON_CLK from platform code, and on all other platforms, it must
not be enabled, so there is no point making the option visible to
users, and when it is visible, we break randconfig builds.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Many platforms support simple gateable clocks, fixed-rate clocks,
adjustable divider clocks and multi-parent multiplexer clocks.
This patch introduces basic clock types for the above-mentioned hardware
which share some common characteristics.
Based on original work by Jeremy Kerr and contribution by Jamie Iles.
Dividers and multiplexor clocks originally contributed by Richard Zhao &
Sascha Hauer.
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Mike Turquette <mturquette@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Jeremy Kerr <jeremy.kerr@canonical.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergman <arnd.bergmann@linaro.org>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Shawn Guo <shawn.guo@freescale.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: Richard Zhao <richard.zhao@linaro.org>
Cc: Saravana Kannan <skannan@codeaurora.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Amit Kucheria <amit.kucheria@linaro.org>
Cc: Deepak Saxena <dsaxena@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The common clock framework defines a common struct clk useful across
most platforms as well as an implementation of the clk api that drivers
can use safely for managing clocks.
The net result is consolidation of many different struct clk definitions
and platform-specific clock framework implementations.
This patch introduces the common struct clk, struct clk_ops and an
implementation of the well-known clock api in include/clk/clk.h.
Platforms may define their own hardware-specific clock structure and
their own clock operation callbacks, so long as it wraps an instance of
struct clk_hw.
See Documentation/clk.txt for more details.
This patch is based on the work of Jeremy Kerr, which in turn was based
on the work of Ben Herrenschmidt.
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Mike Turquette <mturquette@ti.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring <rob.herring <at> calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Jeremy Kerr <jeremy.kerr@canonical.com>
Cc: Arnd Bergman <arnd.bergmann@linaro.org>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Shawn Guo <shawn.guo@freescale.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Richard Zhao <richard.zhao@linaro.org>
Cc: Saravana Kannan <skannan@codeaurora.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Amit Kucheria <amit.kucheria@linaro.org>
Cc: Deepak Saxena <dsaxena@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The commit 40d3e0f (clk: provide prepare/unprepare functions) provides
the config option HAVE_CLK_PREPARE for platforms that have
prepare/unprepare implementation to select. This patch adds the option
into drivers/clk/Kconfig, so that it can be actually selected.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Now most of ARM machines has the alsmot same __clk_get/put() macro
So place it at the arch/arm/include/asm/clkdev.h and remove the reduntant header files
But some machines don't have the same form as above. It can use the machince specific clkdev file by HAVE_MACH_CLKDEV config
Now there are only 3 caese.
1) define the clk structure with clkdev macro => Need to move clk structure to proper header file
arch/arm/mach-versatile/include/mach/clkdev.h
arch/arm/mach-realview/include/mach/clkdev.h
arch/arm/mach-vexpress/include/mach/clkdev.h
arch/arm/mach-integrator/include/mach/clkdev.h
2) export the __clk_get/put function at clock.c
arch/arm/mach-shmobile/include/mach/clkdev.h
3) demuxing the clk source
arch/arm/mach-u300/include/mach/clkdev.h
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
clkdev may incorrectly cause a clkdev entry with a NULL clk to return
-ENOENT. This is not the intention of this code; -ENOENT should only
be returned if the clock entry can not be found in the table. Fix
this.
Reported-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
factorise some generic infrastructure to assist looking up struct clks
for the ARM & SH architecture.
as the code is identical at 99%
put the arch specific code for allocation as example in asm/clkdev.h
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Viresh Kumar