Modify test library and add eVMCS test. This includes nVMX save/restore
testing.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split prepare_for_vmx_operation() into prepare_for_vmx_operation() and
load_vmcs() so we can inject GUEST_SYNC() in between.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's add the 40 PA-bit versions of the VM modes, that AArch64
should have been using, so we can extend the dirty log test without
breaking things.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While we're messing with the code for the port and to support guest
page sizes that are less than the host page size, we also make some
code formatting cleanups and apply sync_global_to_guest().
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename VM_MODE_FLAT48PG to be more descriptive of its config and add a
new config that has the same parameters, except with 64K pages.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This code adds VM and VCPU setup code for the VM_MODE_FLAT48PG mode.
The VM_MODE_FLAT48PG isn't yet fully supportable, as it defines the
guest physical address limit as 52-bits, and KVM currently only
supports guests with up to 40-bit physical addresses (see
KVM_PHYS_SHIFT). VM_MODE_FLAT48PG will work fine, though, as long as
no >= 40-bit physical addresses are used.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tidy up kvm-util code: code/comment formatting, remove unused code,
and move x86 specific code out. We also move vcpu_dump() out of
common code, because not all arches (AArch64) have KVM_GET_REGS.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework the guest exit to userspace code to generalize the concept
into what it is, a "hypercall to userspace", and provide two
implementations of it: the PortIO version currently used, but only
useable by x86, and an MMIO version that other architectures (except
s390) can use.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Guest code may want to call functions that have variable arguments.
To do so, we either need to compile with -mno-sse or enable SSE in
the VCPUs. As it should be pretty safe to turn on the feature, and
-mno-sse would make linking test code with standard libraries
difficult, we choose the feature enabling.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make global symbols in libbpf DSO hidden by default with
-fvisibility=hidden and export symbols that are part of ABI explicitly
with __attribute__((visibility("default"))).
This is common practice that should prevent from accidentally exporting
a symbol, that is not supposed to be a part of ABI what, in turn,
improves both libbpf developer- and user-experiences. See [1] for more
details.
Export control becomes more important since more and more projects use
libbpf.
The patch doesn't export a bunch of netlink related functions since as
agreed in [2] they'll be reworked. That doesn't break bpftool since
bpftool links libbpf statically.
[1] https://www.akkadia.org/drepper/dsohowto.pdf (2.2 Export Control)
[2] https://www.mail-archive.com/netdev@vger.kernel.org/msg251434.html
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
So the extra user build flags are propagated to libtraceevent.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: "Herton R. Krzesinski" <herton@redhat.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Link: http://lkml.kernel.org/r/20181016150614.21260-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the function name for an inline frame is invalid, we must not try
to demangle this symbol, otherwise we crash with:
#0 0x0000555555895c01 in bfd_demangle ()
#1 0x0000555555823262 in demangle_sym (dso=0x555555d92b90, elf_name=0x0, kmodule=0) at util/symbol-elf.c:215
#2 dso__demangle_sym (dso=dso@entry=0x555555d92b90, kmodule=<optimized out>, kmodule@entry=0, elf_name=elf_name@entry=0x0) at util/symbol-elf.c:400
#3 0x00005555557fef4b in new_inline_sym (funcname=0x0, base_sym=0x555555d92b90, dso=0x555555d92b90) at util/srcline.c:89
#4 inline_list__append_dso_a2l (dso=dso@entry=0x555555c7bb00, node=node@entry=0x555555e31810, sym=sym@entry=0x555555d92b90) at util/srcline.c:264
#5 0x00005555557ff27f in addr2line (dso_name=dso_name@entry=0x555555d92430 "/home/milian/.debug/.build-id/f7/186d14bb94f3c6161c010926da66033d24fce5/elf", addr=addr@entry=2888, file=file@entry=0x0,
line=line@entry=0x0, dso=dso@entry=0x555555c7bb00, unwind_inlines=unwind_inlines@entry=true, node=0x555555e31810, sym=0x555555d92b90) at util/srcline.c:313
#6 0x00005555557ffe7c in addr2inlines (sym=0x555555d92b90, dso=0x555555c7bb00, addr=2888, dso_name=0x555555d92430 "/home/milian/.debug/.build-id/f7/186d14bb94f3c6161c010926da66033d24fce5/elf")
at util/srcline.c:358
So instead handle the case where we get invalid function names for
inlined frames and use a fallback '??' function name instead.
While this crash was originally reported by Hadrien for rust code, I can
now also reproduce it with trivial C++ code. Indeed, it seems like
libbfd fails to interpret the debug information for the inline frame
symbol name:
$ addr2line -e /home/milian/.debug/.build-id/f7/186d14bb94f3c6161c010926da66033d24fce5/elf -if b48
main
/usr/include/c++/8.2.1/complex:610
??
/usr/include/c++/8.2.1/complex:618
??
/usr/include/c++/8.2.1/complex:675
??
/usr/include/c++/8.2.1/complex:685
main
/home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39
I've reported this bug upstream and also attached a patch there which
should fix this issue:
https://sourceware.org/bugzilla/show_bug.cgi?id=23715
Reported-by: Hadrien Grasland <grasland@lal.in2p3.fr>
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: a64489c56c ("perf report: Find the inline stack for a given address")
[ The above 'Fixes:' cset is where originally the problem was
introduced, i.e. using a2l->funcname without checking if it is NULL,
but this current patch fixes the current codebase, i.e. multiple csets
were applied after a64489c56c before the problem was reported by Hadrien ]
Link: http://lkml.kernel.org/r/20180926135207.30263-3-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The size of the resulting cpu map can be smaller than a multiple of
sizeof(u64), resulting in SIGBUS on cpus like Sparc as the next event
will not be aligned properly.
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Fixes: 6c872901af ("perf cpu_map: Add cpu_map event synthesize function")
Link: http://lkml.kernel.org/r/20181011.224655.716771175766946817.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If there's no tracefs (RHEL7) support the tracing_path_mount
returns debugfs path which results in following fail:
# perf probe sys_write
kprobe_events file does not exist - please rebuild kernel with CONFIG_KPROBE_EVENTS.
Error: Failed to add events.
In tracing_path_debugfs_mount function we need to return the
'tracing' path instead of just the mount to make it work:
# perf probe sys_write
Added new event:
probe:sys_write (on sys_write)
You can now use it in all perf tools, such as:
perf record -e probe:sys_write -aR sleep 1
Adding the 'return tracing_path;' also to tracing_path_tracefs_mount
function just for consistency with tracing_path_debugfs_mount.
Upstream keeps working, because it has the tracefs support.
Link: http://lkml.kernel.org/n/tip-yiwkzexq9fk1ey1xg3gnjlw4@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Fixes: 23773ca18b ("perf tools: Make perf aware of tracefs")
Link: http://lkml.kernel.org/r/20181016114818.3595-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andrey reported a build error for the BPF kselftest suite when compiled on
a machine which does not have tls related header bits installed natively:
test_sockmap.c:120:23: fatal error: linux/tls.h: No such file or directory
#include <linux/tls.h>
^
compilation terminated.
Fix it by adding the header to the tools include infrastructure and add
definitions such as SOL_TLS that could potentially be missing.
Fixes: e9dd904708 ("bpf: add tls support for testing in test_sockmap")
Reported-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a build is run from something like a cron job, the user's $PATH is
rather minimal, of note, not including /usr/sbin in my own case. Because
of that, an automated rpm package build ultimately fails to find
libperf-jvmti.so, because somewhere within the build, this happens...
/bin/sh: alternatives: command not found
/bin/sh: alternatives: command not found
Makefile.config:849: No openjdk development package found, please install
JDK package, e.g. openjdk-8-jdk, java-1.8.0-openjdk-devel
...and while the build continues, libperf-jvmti.so isn't built, and
things fall down when rpm tries to find all the %files specified. Exact
same system builds everything just fine when the job is launched from a
login shell instead of a cron job, since alternatives is in $PATH, so
openjdk is actually found.
The test required to get into this section of code actually specifies
the full path, as does a block just above it, so let's do that here too.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: William Cohen <wcohen@redhat.com>
Fixes: d4dfdf00d4 ("perf jvmti: Plug compilation into perf build")
Link: http://lkml.kernel.org/r/20180906221812.11167-1-jarod@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
John reported crash when recording on an event under PMU with cpumask defined:
root@localhost:~# ./perf_debug_ record -e armv8_pmuv3_0/br_mis_pred/ sleep 1
perf: Segmentation fault
Obtained 9 stack frames.
./perf_debug_() [0x4c5ef8]
[0xffff82ba267c]
./perf_debug_() [0x4bc5a8]
./perf_debug_() [0x419550]
./perf_debug_() [0x41a928]
./perf_debug_() [0x472f58]
./perf_debug_() [0x473210]
./perf_debug_() [0x4070f4]
/lib/aarch64-linux-gnu/libc.so.6(__libc_start_main+0xe0) [0xffff8294c8a0]
Segmentation fault (core dumped)
We synthesize an update event that needs to touch the evsel id array, which is
not defined at that time. Fixing this by forcing the id allocation for events
with their own cpus.
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Fixes: bfd8f72c27 ("perf record: Synthesize unit/scale/... in event update")
Link: http://lkml.kernel.org/r/20181003212052.GA32371@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This cpupower update for Linux 4.20-rc1 consists of fixes for bugs and
compile warnings from Prarit Bhargava and Anders Roxell.
-----BEGIN PGP SIGNATURE-----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=S5Ie
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux into pm-tools
Pull cpupower utility changes for 4.20 from Shuah Khan:
"This cpupower update consists of fixes for bugs and compile warnings
from Prarit Bhargava and Anders Roxell."
* tag 'linux-cpupower-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: Fix coredump on VMWare
cpupower: Fix AMD Family 0x17 msr_pstate size
cpupower: remove stringop-truncation waring
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-10-16
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Convert BPF sockmap and kTLS to both use a new sk_msg API and enable
sk_msg BPF integration for the latter, from Daniel and John.
2) Enable BPF syscall side to indicate for maps that they do not support
a map lookup operation as opposed to just missing key, from Prashant.
3) Add bpftool map create command which after map creation pins the
map into bpf fs for further processing, from Jakub.
4) Add bpftool support for attaching programs to maps allowing sock_map
and sock_hash to be used from bpftool, from John.
5) Improve syscall BPF map update/delete path for map-in-map types to
wait a RCU grace period for pending references to complete, from Daniel.
6) Couple of follow-up fixes for the BPF socket lookup to get it
enabled also when IPv6 is compiled as a module, from Joe.
7) Fix a generic-XDP bug to handle the case when the Ethernet header
was mangled and thus update skb's protocol and data, from Jesper.
8) Add a missing BTF header length check between header copies from
user space, from Wenwen.
9) Minor fixups in libbpf to use __u32 instead u32 types and include
proper perf_event.h uapi header instead of perf internal one, from Yonghong.
10) Allow to pass user-defined flags through EXTRA_CFLAGS and EXTRA_LDFLAGS
to bpftool's build, from Jiri.
11) BPF kselftest tweaks to add LWTUNNEL to config fragment and to install
with_addr.sh script from flow dissector selftest, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If --trace is passed as an option and tcpdump is available,
capture traffic for all relevant interfaces to per-test pcap
files named <test>_<interface>.pcap.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
As number of tests is growing, it's quite convenient to allow
single tests to be run.
Display usage when the script is run with any invalid argument,
keep existing semantics when no arguments are passed so that
automated runs won't break.
Instead of just looping on the list of requested tests, if any,
check first that they exist, and go through them in a nested
loop to keep the existing way to display test descriptions.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a way of creating maps from user space. The command takes
as parameters most of the attributes of the map creation system
call command. After map is created its pinned to bpffs. This makes
it possible to easily and dynamically (without rebuilding programs)
test various corner cases related to map creation.
Map type names are taken from bpftool's array used for printing.
In general these days we try to make use of libbpf type names, but
there are no map type names in libbpf as of today.
As with most features I add the motivation is testing (offloads) :)
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Multiple map definition structures exist and user may have non-zero
fields in their definition that are not recognized by bpftool and
libbpf. The normal behavior is to then fail loading the map. Although
this is a good default behavior users may still want to load the map
for debugging or other reasons. This patch adds a --mapcompat flag
that can be used to override the default behavior and allow loading
the map even when it has additional non-zero fields.
For now the only user is 'bpftool prog' we can switch over other
subcommands as needed. The library exposes an API that consumes
a flags field now but I kept the original API around also in case
users of the API don't want to expose this. The flags field is an
int in case we need more control over how the API call handles
errors/features/etc in the future.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Sock map/hash introduce support for attaching programs to maps. To
date I have been doing this with custom tooling but this is less than
ideal as we shift to using bpftool as the single CLI for our BPF uses.
This patch adds new sub commands 'attach' and 'detach' to the 'prog'
command to attach programs to maps and then detach them.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This adds a --ktls option to test_sockmap in order to enable the
combination of ktls and sockmap to run, which makes for another
batch of 648 test cases for both in combination.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2018-10-14
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix xsk map update and delete operation to not call synchronize_net()
but to piggy back on SOCK_RCU_FREE for sockets instead as we are not
allowed to sleep under RCU, from Björn.
2) Do not change RLIMIT_MEMLOCK in reuseport_bpf selftest if the process
already has unlimited RLIMIT_MEMLOCK, from Eric.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts were easy to resolve using immediate context mostly,
except the cls_u32.c one where I simply too the entire HEAD
chunk.
Signed-off-by: David S. Miller <davem@davemloft.net>
David writes:
"Networking
1) RXRPC receive path fixes from David Howells.
2) Re-export __skb_recv_udp(), from Jiri Kosina.
3) Fix refcounting in u32 classificer, from Al Viro.
4) Userspace netlink ABI fixes from Eugene Syromiatnikov.
5) Don't double iounmap on rmmod in ena driver, from Arthur
Kiyanovski.
6) Fix devlink string attribute handling, we must pull a copy into a
kernel buffer if the lifetime extends past the netlink request.
From Moshe Shemesh.
7) Fix hangs in RDS, from Ka-Cheong Poon.
8) Fix recursive locking lockdep warnings in tipc, from Ying Xue.
9) Clear RX irq correctly in socionext, from Ilias Apalodimas.
10) bcm_sf2 fixes from Florian Fainelli."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits)
net: dsa: bcm_sf2: Call setup during switch resume
net: dsa: bcm_sf2: Fix unbind ordering
net: phy: sfp: remove sfp_mutex's definition
r8169: set RX_MULTI_EN bit in RxConfig for 8168F-family chips
net: socionext: clear rx irq correctly
net/mlx4_core: Fix warnings during boot on driverinit param set failures
tipc: eliminate possible recursive locking detected by LOCKDEP
selftests: udpgso_bench.sh explicitly requires bash
selftests: rtnetlink.sh explicitly requires bash.
qmi_wwan: Added support for Gemalto's Cinterion ALASxx WWAN interface
tipc: queue socket protocol error messages into socket receive buffer
tipc: set link tolerance correctly in broadcast link
net: ipv4: don't let PMTU updates increase route MTU
net: ipv4: update fnhe_pmtu when first hop's MTU changes
net/ipv6: stop leaking percpu memory in fib6 info
rds: RDS (tcp) hangs on sendto() to unresponding address
net: make skb_partial_csum_set() more robust against overflows
devlink: Add helper function for safely copy string param
devlink: Fix param cmode driverinit for string type
devlink: Fix param set handling for string type
...
The ip_defrag.sh script requires bash-style output redirection but
use the default shell. This may cause random failures if the default
shell is not bash.
Address the above using posix compliant output redirection.
Fixes: 02c7f38b7a ("selftests/net: add ip_defrag selftest")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The udpgso_bench.sh script requires several bash-only features. This
may cause random failures if the default shell is not bash.
Address the above explicitly requiring bash as the script interpreter
Fixes: 3a687bef14 ("selftests: udp gso benchmark")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
the script rtnetlink.sh requires a bash-only features (sleep with sub-second
precision). This may cause random test failure if the default shell is not
bash.
Address the above explicitly requiring bash as the script interpreter.
Fixes: 33b01b7b4f ("selftests: add rtnetlink test script")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael reported that he could not stat following event:
$ perf stat -e unc_p_freq_ge_1200mhz_cycles -a -- ls
event syntax error: '..e_1200mhz_cycles'
\___ value too big for format, maximum is 255
Run 'perf list' for a list of valid events
The event is unwrapped into:
uncore_pcu/event=0xb,filter_band0=1200/
where filter_band0 format says it's one byte only:
# cat uncore_pcu/format/filter_band0
config1:0-7
while JSON files specifies bigger number:
"Filter": "filter_band0=1200",
all the filter_band* formats show 1 byte width:
# cat uncore_pcu/format/filter_band1
config1:8-15
# cat uncore_pcu/format/filter_band2
config1:16-23
# cat uncore_pcu/format/filter_band3
config1:24-31
The reason of the issue is that filter_band* values are supposed to be
in 100Mhz units.. it's stated in the JSON help for the events, like:
filter_band3=XXX, with XXX in 100Mhz units
This patch divides the filter_band* values by 100, plus there's couple
of changes that actually change the number completely, like:
- "Filter": "edge=1,filter_band2=4000",
+ "Filter": "edge=1,filter_band2=30",
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181010080339.GB15790@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo, a man of few words, writes:
"perf fixes:
misc perf tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf record: Use unmapped IP for inline callchain cursors
perf python: Use -Wno-redundant-decls to build with PYTHON=python3
perf report: Don't try to map ip to invalid map
perf script python: Fix export-to-sqlite.py sample columns
perf script python: Fix export-to-postgresql.py occasional failure
When test_flow_dissector.sh runs it complains that it can't find script
with_addr.sh:
./test_flow_dissector.sh: line 81: ./with_addr.sh: No such file or
directory
Rework so that with_addr.sh gets installed, add it to
TEST_PROGS_EXTENDED variable.
Fixes: 50b3ed57de ("selftests/bpf: test bpf flow dissection")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When test_lwt_seg6local.sh was added commit c99a84eac0
("selftests/bpf: test for seg6local End.BPF action") config fragment
wasn't added, and without CONFIG_LWTUNNEL enabled we see this:
Error: CONFIG_LWTUNNEL is not enabled in this kernel.
selftests: test_lwt_seg6local [FAILED]
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Adding EXTRA_LDFLAGS allowing user to specify extra flags
for LD_FLAGS variable. Also adding LDFLAGS to build command
line.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Adding EXTRA_CFLAGS allowing user to specify extra flags
for CFLAGS variable.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This is a self-standing test and as such should be itself executable.
Fixes: b5638d46c9 ("selftests: mlxsw: Add a test for UC behavior under MC flood")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Immediately after mlxsw module is probed and lldpad started, added APP
entries are briefly in "unknown" state before becoming "pending". That's
the state that lldpad_app_wait_set() typically sees, and since there are
no pending entries at that time, it bails out. However the entries have
not been pushed to the kernel yet at that point, and thus the test case
fails.
Fix by waiting for both unknown and pending entries to disappear before
proceeding.
Fixes: d159261f36 ("selftests: mlxsw: Add test for trust-DSCP")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use __u32 instead u32 in libbpf.c and also use
uapi perf_event.h instead of tools/perf/perf-sys.h.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This XDP selftest also contain a small TC-bpf component. It provoke
the generic-XDP bug fixed in previous commit.
The selftest itself shows how to do VLAN manipulation from XDP and TC.
The test demonstrate how XDP ingress can remove a VLAN tag, and how TC
egress can add back a VLAN tag.
This use-case originates from a production need by ISP (kviknet.dk),
who gets DSL-lines terminated as VLAN Q-in-Q tagged packets, and want
to avoid having an net_device for every end-customer on the box doing
the L2 to L3 termination.
The test-setup is done via a veth-pair and creating two network
namespaces (ns1 and ns2). The 'ns1' simulate the ISP network that are
loading the BPF-progs stripping and adding VLAN IDs. The 'ns2'
simulate the DSL-customer that are using VLAN tagged packets.
Running the script with --interactive, will simply not call the
cleanup function. This gives the effect of creating a testlab, that
the users can inspect and play with. The --verbose option will simply
request that the shell will print input lines as they are read, this
include comments, which in effect make the comments visible docs.
Reported-by: Yoel Caspersen <yoel@kviknet.dk>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The helper bpf_skb_vlan_push is needed by next patch, and the helper
bpf_skb_vlan_pop is added for completeness, regarding VLAN helpers.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently fixup map are named like fixup_map1, fixup_map2, and so on.
As suggested by Alexei let's change change map names such that we can
identify map type by looking at the name.
This patch is basically a find and replace change:
fixup_map1 -> fixup_map_hash_8b
fixup_map2 -> fixup_map_hash_48b
fixup_map3 -> fixup_map_hash_16b
fixup_map4 -> fixup_map_array_48b
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since map lookup error can be ENOENT or EOPNOTSUPP, let's print
strerror() as error message in normal and JSON output.
This patch adds helper function print_entry_error() to print
entry from lookup error occurs
Example: Following example dumps a map which does not support lookup.
Output before:
root# bpftool map -jp dump id 40
[
"key": ["0x0a","0x00","0x00","0x00"
],
"value": {
"error": "can\'t lookup element"
},
"key": ["0x0b","0x00","0x00","0x00"
],
"value": {
"error": "can\'t lookup element"
}
]
root# bpftool map dump id 40
can't lookup element with key:
0a 00 00 00
can't lookup element with key:
0b 00 00 00
Found 0 elements
Output after changes:
root# bpftool map dump -jp id 45
[
"key": ["0x0a","0x00","0x00","0x00"
],
"value": {
"error": "Operation not supported"
},
"key": ["0x0b","0x00","0x00","0x00"
],
"value": {
"error": "Operation not supported"
}
]
root# bpftool map dump id 45
key:
0a 00 00 00
value:
Operation not supported
key:
0b 00 00 00
value:
Operation not supported
Found 0 elements
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
do_dump() function in bpftool/map.c has deep indentations. In order
to reduce deep indent, let's move element printing code out of
do_dump() into dump_map_elem() function.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add sleep between attach and "usbip port" check to make sure status is
updated. Running attach and query back shows incorrect status.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit ac0e2cd555.
Michael reported an issue with oversized terms values assignment
and I noticed there was actually a misunderstanding of the max
value check in the past.
The above commit's changelog says:
If bit 21 is set, there is parsing issues as below.
$ perf stat -a -e uncore_qpi_0/event=0x200002,umask=0x8/
event syntax error: '..pi_0/event=0x200002,umask=0x8/'
\___ value too big for format, maximum is 511
But there's no issue there, because the event value is distributed
along the value defined by the format. Even if the format defines
separated bit, the value is treated as a continual number, which
should follow the format definition.
In above case it's 9-bit value with last bit separated:
$ cat uncore_qpi_0/format/event
config:0-7,21
Hence the value 0x200002 is correctly reported as format violation,
because it exceeds 9 bits. It should have been 0x102 instead, which
sets the 9th bit - the bit 21 of the format.
$ perf stat -vv -a -e uncore_qpi_0/event=0x102,umask=0x8/
Using CPUID GenuineIntel-6-2D
...
------------------------------------------------------------
perf_event_attr:
type 10
size 112
config 0x200802
sample_type IDENTIFIER
...
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: ac0e2cd555 ("perf tools: Fix PMU term format max value calculation")
Link: http://lkml.kernel.org/r/20181003072046.29276-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bootgraph & sleepgraph:
- funnel all prints through the pprint function
- remove superfluous print calls, arrange them in single blocks
- flush stdout on every print, enables log capture on hang
sleepgraph:
- in -summary, if all tests have the same host+kernel+mode, add to title
- update verbose device detail print to include machine suspend/resume
- match tKernSus and tKernRes to pm_prepare/restore_console
- fully support multiple suspend/resumes in a single timeline
- enable various disk modes (disk-suspend, disk-test_resume, etc)
- add warnings when -display (xset) fails
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-10-08
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) sk_lookup_[tcp|udp] and sk_release helpers from Joe Stringer which allow
BPF programs to perform lookups for sockets in a network namespace. This would
allow programs to determine early on in processing whether the stack is
expecting to receive the packet, and perform some action (eg drop,
forward somewhere) based on this information.
2) per-cpu cgroup local storage from Roman Gushchin.
Per-cpu cgroup local storage is very similar to simple cgroup storage
except all the data is per-cpu. The main goal of per-cpu variant is to
implement super fast counters (e.g. packet counters), which don't require
neither lookups, neither atomic operations in a fast path.
The example of these hybrid counters is in selftests/bpf/netcnt_prog.c
3) allow HW offload of programs with BPF-to-BPF function calls from Quentin Monnet
4) support more than 64-byte key/value in HW offloaded BPF maps from Jakub Kicinski
5) rename of libbpf interfaces from Andrey Ignatov.
libbpf is maturing as a library and should follow good practices in
library design and implementation to play well with other libraries.
This patch set brings consistent naming convention to global symbols.
6) relicense libbpf as LGPL-2.1 OR BSD-2-Clause from Alexei Starovoitov
to let Apache2 projects use libbpf
7) various AF_XDP fixes from Björn and Magnus
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
. Fix building the python bindings with python3, which fixes some
problems with building with clang on Clear Linux (Eduardo Habkost)
. Fix coverity warnings, fixing up some error paths and plugging
some temporary small buffer leaks (Sanskriti Sharma)
. Adopt a wrapper for strerror_r() for the same reasons as recently
for libbpf (Steven Rostedt)
. S390 does not support watchpoints in perf test 22', check if
that test is supported by the arch. (Thomas Richter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCW7v7awAKCRCyPKLppCJ+
J4OEAQDn4gtW/Nr8uHhwOk0+CbX+Pamb4iU2feF9HWkOZ6qY+QD/bXHTpl9/darN
FknCsmpCzji76qU4OYd7SYu4N69dBwQ=
=1VTA
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.20-20181008' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- Fix building the python bindings with python3, which fixes some
problems with building with clang on Clear Linux (Eduardo Habkost)
- Fix coverity warnings, fixing up some error paths and plugging
some temporary small buffer leaks (Sanskriti Sharma)
- Adopt a wrapper for strerror_r() for the same reasons as recently
for libbpf (Steven Rostedt)
- S390 does not support watchpoints in perf test 22', check if
that test is supported by the arch. (Thomas Richter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This merges in the "ppc-kvm" topic branch of the powerpc tree to get a
series of commits that touch both general arch/powerpc code and KVM
code. These commits will be merged both via the KVM tree and the
powerpc tree.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Currently we use two bits in the vcpu pending_exceptions bitmap to
indicate that an external interrupt is pending for the guest, one
for "one-shot" interrupts that are cleared when delivered, and one
for interrupts that persist until cleared by an explicit action of
the OS (e.g. an acknowledge to an interrupt controller). The
BOOK3S_IRQPRIO_EXTERNAL bit is used for one-shot interrupt requests
and BOOK3S_IRQPRIO_EXTERNAL_LEVEL is used for persisting interrupts.
In practice BOOK3S_IRQPRIO_EXTERNAL never gets used, because our
Book3S platforms generally, and pseries in particular, expect
external interrupt requests to persist until they are acknowledged
at the interrupt controller. That combined with the confusion
introduced by having two bits for what is essentially the same thing
makes it attractive to simplify things by only using one bit. This
patch does that.
With this patch there is only BOOK3S_IRQPRIO_EXTERNAL, and by default
it has the semantics of a persisting interrupt. In order to avoid
breaking the ABI, we introduce a new "external_oneshot" flag which
preserves the behaviour of the KVM_INTERRUPT ioctl with the
KVM_INTERRUPT_SET argument.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As traceevent is going to be transferred into a proper library,
its local data should be protected from the library users.
This patch encapsulates struct tep_handler into a local header,
not visible outside of the library. It implements also a bunch
of new APIs, which library users can use to access tep_handler members.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux trace devel <linux-trace-devel@vger.kernel.org>
Cc: tzvetomir stoyanov <tstoyanov@vmware.com>
Link: http://lkml.kernel.org/r/20181005122225.522155df@gandalf.local.home
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit d1f1b9cbf3 ("selftests: net: Introduce first PMTU test") and
follow-ups introduced some PMTU tests, but they all rely on tunneling,
and, particularly, on VTI.
These new tests use simple routing to exercise the generation and
update of PMTU exceptions in IPv4 and IPv6.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mtu_parse helper introduced in commit f2c929feec ("selftests:
pmtu: Factor out MTU parsing helper") can only handle "mtu 1234", but
not "mtu lock 1234". Extend it, so that we can do IPv4 tests with PMTU
smaller than net.ipv4.route.min_pmtu
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce and use a function that checks PMTU values against
expected values and logs error messages, to remove some clutter.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While working on having PowerTop use libtracevent as a shared object
library, Tzvetomir hit "str_error_r not defined". This was added by commit
c3cec9e68f ("tools lib traceevent: Use str_error_r()") because
strerror_r() has two definitions, where one is GNU specific, and the other
is XSI complient. The strerror_r() is in a wrapper str_error_r() to keep the
code from having to worry about which compiler is being used.
The problem is that str_error_r() is external to libtraceevent, and not part
of the library. If it is used as a shared object then the tools using it
will need to define that function. I do not want that function defined in
libtraceevent itself, as it is out of scope for that library.
As there's only a single instance of this call, and its in the traceevent
library's own tep_strerror() function, we can copy what was done in perf,
and create yet another external file that undefs _GNU_SOURCE to use the more
portable version of the function. We don't need to worry about the errors
that strerror_r() returns. If the buffer isn't big enough, we simply
truncate it.
Reported-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: linux trace devel <linux-trace-devel@vger.kernel.org>
Link: http://lkml.kernel.org/r/20181005121816.484e654f@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The existing code that tries to make CFLAGS compatible with clang
doesn't work with Python 3.
Instead of trying to touch _sysconfigdata.build_time_vars directly,
change the dictionary returned by disutils.sysconfig.get_config_vars().
This works on both Python 2 and Python 3.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20181005204058.7966-3-ehabkost@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use a bytes literal so it works with Python 3's version of Popen().
Note that the b"..." syntax requires Python 2.6+.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20181005204058.7966-2-ehabkost@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For each system in a given pevent, read_event_files() reads in a
temporary 'sys' string. Be sure to free this string before moving onto
to the next system and/or leaving read_event_files().
Fixes the following coverity complaints:
Error: RESOURCE_LEAK (CWE-772):
tools/perf/util/trace-event-read.c:343: overwrite_var: Overwriting
"sys" in "sys = read_string()" leaks the storage that "sys" points to.
tools/perf/util/trace-event-read.c:353: leaked_storage: Variable "sys"
going out of scope leaks the storage it points to.
Signed-off-by: Sanskriti Sharma <sansharm@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Link: http://lkml.kernel.org/r/1538490554-8161-6-git-send-email-sansharm@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The temporary 'buf' buffer allocated in read_event_file() may be freed
twice. Move the free() call to the common function exit point.
Fixes the following coverity complaints:
Error: USE_AFTER_FREE (CWE-825):
tools/perf/util/trace-event-read.c:309: double_free: Calling "free"
frees pointer "buf" which has already been freed.
Signed-off-by: Sanskriti Sharma <sansharm@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Link: http://lkml.kernel.org/r/1538490554-8161-5-git-send-email-sansharm@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
parse_ftrace_printk() tokenizes and parses a line, calling strdup() each
iteration. Add code to free this temporary format string duplicate.
Fixes the following coverity complaints:
Error: RESOURCE_LEAK (CWE-772):
tools/perf/util/trace-event-parse.c:158: overwrite_var: Overwriting
"printk" in "printk = strdup(fmt + 1)" leaks the storage that "printk"
points to.
tools/perf/util/trace-event-parse.c:162: leaked_storage: Variable
"printk" going out of scope leaks the storage it points to.
Signed-off-by: Sanskriti Sharma <sansharm@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Link: http://lkml.kernel.org/r/1538490554-8161-4-git-send-email-sansharm@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Free tracing_data structure in tracing_data_get() error paths.
Fixes the following coverity complaint:
Error: RESOURCE_LEAK (CWE-772):
leaked_storage: Variable "tdata" going out of scope leaks the storage
Signed-off-by: Sanskriti Sharma <sansharm@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Link: http://lkml.kernel.org/r/1538490554-8161-3-git-send-email-sansharm@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ensure that all code paths in strbuf_addv() call va_end() on the
ap_saved copy that was made.
Fixes the following coverity complaint:
Error: VARARGS (CWE-237): [#def683]
tools/perf/util/strbuf.c:106: missing_va_end: va_end was not called
for "ap_saved".
Signed-off-by: Sanskriti Sharma <sansharm@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Link: http://lkml.kernel.org/r/1538490554-8161-2-git-send-email-sansharm@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
S390 does not support the perf_event_open system call for
attribute type PERF_TYPE_BREAKPOINT. This results in test
failure for test 22:
[root@s8360046 perf]# ./perf test 22
22: Watchpoint :
22.1: Read Only Watchpoint : FAILED!
22.2: Write Only Watchpoint : FAILED!
22.3: Read / Write Watchpoint : FAILED!
22.4: Modify Watchpoint : FAILED!
[root@s8360046 perf]#
Add s390 support to avoid these tests being executed on
s390 platform:
[root@s8360046 perf]# ./perf test 22
[root@s8360046 perf]# ./perf test -v 22
22: Watchpoint : Disabled
[root@s8360046 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180928105335.67179-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The auxtrace.h header references BITS_PER_LONG without including the
header where it is defined, getting it by luck from some other header,
fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-v04ydmbh7tvpcctf3zld9j9s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we reduce the difference of tools/include/linux/bitops.h to the
original kernel file, include/linux/bitops.h, trying to remove the need
to define BITS_PER_LONG, to avoid clashes with asm/bitsperlong.h.
And the things removed from tools/include/linux/bitops.h are really in
linux/bits.h, so that we can have a copy and then
tools/perf/check_headers.sh will tell us when new stuff gets added to
linux/bits.h so that we can check if it is useful and if any adjustment
needs to be done to the tools/{include,arch}/ copies.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-y1sqyydvfzo0bjjoj4zsl562@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
cpupower crashes on VMWare guests. The guests have the AMD PStateDef MSR
(0xC0010064 + state number) set to zero. As a result fid and did are zero
and the crash occurs because of a divide by zero (cof = fid/did). This
can be prevented by checking the enable bit in the PStateDef MSR before
calculating cof. By doing this the value of pstate[i] remains zero and
the value can be tested before displaying the active Pstates.
Check the enable bit in the PstateDef register for all supported families
and only print out enabled Pstates.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
The msr_pstate data is only 63 bits long and should be 64 bits.
Add in the missing bit from res1 for AMD Family 0x17.
Reference: https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf, page 138.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
To pick up the changes introduced in:
6fbbde9a19 ("KVM: x86: Control guest reads of MSR_PLATFORM_INFO")
That is not yet used in tools such as 'perf trace'.
The type of the change in this file, a simple integer parameter to the
KVM_CHECK_EXTENSION ioctl should be easier to implement tho, adding to
the libbeauty TODO list.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Drew Schmitt <dasch@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-67h1bio5bihi1q6dy7hgwwx8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
d176620277 ("x86/kvm/lapic: always disable MMIO interface in x2APIC mode")
That at this time will not generate changes in tools such as 'perf trace',
that still needs more work in tools/perf/examples/bpf/augmented_syscalls.c
to need such id -> string tables.
This silences the following perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-yadntj2ok6zpzjwi656onuh0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the current process has unlimited RLIMIT_MEMLOCK,
we should should leave it as is.
Fixes: 941ff6f11c ("bpf: fix rlimit in reuseport net selftest")
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
libbpf is maturing as a library and gaining features that no other bpf libraries support
(BPF Type Format, bpf to bpf calls, etc)
Many Apache2 licensed projects (like bcc, bpftrace, gobpf, cilium, etc)
would like to use libbpf, but cannot do this yet, since Apache Foundation explicitly
states that LGPL is incompatible with Apache2.
Hence let's relicense libbpf as dual license LGPL-2.1 or BSD-2-Clause,
since BSD-2 is compatible with Apache2.
Dual LGPL or Apache2 is invalid combination.
Fix license mistake in Makefile as well.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David Beckett <david.beckett@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Joe Stringer <joe@ovn.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Here are 8 small fixes for some char/misc driver issues
Included here are:
- fpga driver fixes
- thunderbolt bugfixes
- firmware core revert/fix
- hv core fix
- hv tool fix
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW7mgvw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yltNwCgp0XpcCTEoBCiBInhPHYpR4xnclYAoId6nfC5
89LJS04eEQzbiQJpigLt
=U6rt
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
I wrote:
"Char/Misc fixes for 4.19-rc7
Here are 8 small fixes for some char/misc driver issues
Included here are:
- fpga driver fixes
- thunderbolt bugfixes
- firmware core revert/fix
- hv core fix
- hv tool fix
All of these have been in linux-next with no reported issues."
* tag 'char-misc-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
thunderbolt: Initialize after IOMMUs
thunderbolt: Do not handle ICM events after domain is stopped
firmware: Always initialize the fw_priv list object
docs: fpga: document fpga manager flags
fpga: bridge: fix obvious function documentation error
tools: hv: fcopy: set 'error' in case an unknown operation was requested
fpga: do not access region struct after fpga_region_unregister
Drivers: hv: vmbus: Use get/put_cpu() in vmbus_connect()
Address compiler warning:
ip_defrag.c: In function 'send_udp_frags':
ip_defrag.c:206:16: warning: unused variable 'udphdr' [-Wunused-variable]
struct udphdr udphdr;
^~~~~~
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
use a TDC plugin, instead of building eBPF programs in the 'setup' stage.
'-B' argument can be used to build eBPF programs in $EBPFDIR directory,
in the 'pre-suite' stage. Binaries are then cleaned in 'post-suite' stage.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rely on uAPI headers in the current kernel tree, rather than requiring the
correct version installed on the test system. While at it, group all
sections in a single binary and test the 'section' parameter.
Reported-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ipv4 and ipv6 test cases with an invalid metrics option causing
ip_metrics_convert to fail. Tests clean up path during route add.
Also, add nodad to to ipv6 address add. When running ipv6_route_metrics
directly seeing an occasional failure on the "Using route with mtu metric"
test case.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix the build on Clear Linux, coping with redundant declarations of
function prototypes in python3 header files by adding
-Wno-redundant-decls to build with PYTHON=python3 (Arnaldo Carvalho de Melo)
- Fixes for processing inline frames in backtraces using DWARF based
unwinding (Milian Wolff)
- Cope with bad DWARF info for function names for inline frames,not
trying to demangle this symbol. Problem reported with rust but
reproduced as well with C++. Problem reported to the libbpf
maintainers (Milian Wolff)
- Fix python export to postgresql and sqlite code (Adrian Hunter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCW7eGGwAKCRCyPKLppCJ+
JzAWAP4rGO2bZmvRFBmg9go5xeYZmOOy8pk9zHslslrNlSSyrwEAvyI1Fk/YYR4I
9UDE+/F9pey7BVuY5V8pFplEEcFF8gY=
=K7kp
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-4.19-20181005' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix the build on Clear Linux, coping with redundant declarations of
function prototypes in python3 header files by adding
-Wno-redundant-decls to build with PYTHON=python3 (Arnaldo Carvalho de Melo)
- Fixes for processing inline frames in backtraces using DWARF based
unwinding (Milian Wolff)
- Cope with bad DWARF info for function names for inline frames,not
trying to demangle this symbol. Problem reported with rust but
reproduced as well with C++. Problem reported to the libbpf
maintainers (Milian Wolff)
- Fix python export to postgresql and sqlite code (Adrian Hunter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJbtxXyAAoJEL/70l94x66D52kH/jEbBo/jz9Jx2bnbxYkG1YzO
cIpIRjbRcOKVFNGxjStlJ0PedQBWAfPQl+SywRfqwiSlOOt/yo0lZ5ZewENR2TxO
CLQC/OnV/5SU7BJvbsKgH9tc+Wp9X55wBUEalfcvG/knFlmR+eK/7TwTS+hv/U21
uYKRnGfz5AGfdmB9FyCn0blkPNnFaQ8KB+y+INZTkB+YZzNsybow230FRPs22fjX
HGeJ7gngah50M5gxDW+YPPNXFhs36x2hsyQXBN9TPxLPHoxTsRRoeqx2nl/UvA+e
LXZWg8/UAzXFO/fKVHkJX4jSnCDr2W7HYGNyLPtXFPWhcOelP1h9uHrfuX+fxA4=
=UNUo
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Paolo writes:
"KVM changes for 4.19-rc7
x86 and PPC bugfixes, mostly introduced in 4.19-rc1."
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: nVMX: fix entry with pending interrupt if APICv is enabled
KVM: VMX: hide flexpriority from guest when disabled at the module level
KVM: VMX: check for existence of secondary exec controls before accessing
KVM: PPC: Book3S HV: Avoid crash from THP collapse during radix page fault
KVM: x86: fix L1TF's MMIO GFN calculation
tools/kvm_stat: cut down decimal places in update interval dialog
KVM: nVMX: Fix emulation of VM_ENTRY_LOAD_BNDCFGS
KVM: x86: Do not use kvm_x86_ops->mpx_supported() directly
KVM: nVMX: Do not expose MPX VMX controls when guest MPX disabled
KVM: x86: never trap MSR_KERNEL_GS_BASE
Only use the mapped IP to find inline frames, but keep using the
unmapped IP for the callchain cursor. This ensures we properly show the
unmapped IP when displaying a frame we received via the
dso__parse_addr_inlines API for a module which does not contain
sufficient debug symbols to show the srcline.
This is another follow-up to commit 1961018469 ("perf script: Show
virtual addresses instead of offsets").
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Fixes: 1961018469 ("perf script: Show virtual addresses instead of offsets")
Link: http://lkml.kernel.org/r/20180926135207.30263-2-milian.wolff@kdab.com
Link: http://lkml.kernel.org/r/20181002073949.3297-1-milian.wolff@kdab.com
[ Squashed a fix from Milian for a problem reported by Ravi, fixed up space damage ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building in ClearLinux using 'make PYTHON=python3' with gcc 8.2.1
it fails with:
GEN /tmp/build/perf/python/perf.so
In file included from /usr/include/python3.7m/Python.h:126,
from /git/linux/tools/perf/util/python.c:2:
/usr/include/python3.7m/import.h:58:24: error: redundant redeclaration of ‘_PyImport_AddModuleObject’ [-Werror=redundant-decls]
PyAPI_FUNC(PyObject *) _PyImport_AddModuleObject(PyObject *, PyObject *);
^~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/python3.7m/import.h:47:24: note: previous declaration of ‘_PyImport_AddModuleObject’ was here
PyAPI_FUNC(PyObject *) _PyImport_AddModuleObject(PyObject *name,
^~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
error: command 'gcc' failed with exit status 1
And indeed there is a redundant declaration in that Python.h file, one
with parameter names and the other without, so just add
-Wno-error=redundant-decls to the python setup instructions.
Now perf builds with gcc in ClearLinux with the following Dockerfile:
# docker.io/acmel/linux-perf-tools-build-clearlinux:latest
FROM docker.io/clearlinux:latest
MAINTAINER Arnaldo Carvalho de Melo <acme@kernel.org>
RUN swupd update && \
swupd bundle-add sysadmin-basic-dev
RUN mkdir -m 777 -p /git /tmp/build/perf /tmp/build/objtool /tmp/build/linux && \
groupadd -r perfbuilder && \
useradd -m -r -g perfbuilder perfbuilder && \
chown -R perfbuilder.perfbuilder /tmp/build/ /git/
USER perfbuilder
COPY rx_and_build.sh /
ENV EXTRA_MAKE_ARGS=PYTHON=python3
ENTRYPOINT ["/rx_and_build.sh"]
Now to figure out why the build fails with clang, that is present in the
above container as detected by the rx_and_build.sh script:
clang version 6.0.1 (tags/RELEASE_601/final)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /usr/sbin
make: Entering directory '/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ OFF ]
... dwarf_getlocations: [ OFF ]
... glibc: [ OFF ]
... gtk2: [ OFF ]
... libaudit: [ OFF ]
... libbfd: [ OFF ]
... libelf: [ OFF ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libslang: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ OFF ]
... zlib: [ OFF ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ OFF ]
Makefile.config:331: *** No gnu/libc-version.h found, please install glibc-dev[el]. Stop.
make[1]: *** [Makefile.perf:206: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
make: Leaving directory '/git/linux/tools/perf'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thiago Macieira <thiago.macieira@intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-c3khb9ac86s00qxzjrueomme@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add ipv4 and ipv6 test cases for metrics (mtu) when fib entries are
created. Can be used with kmemleak to see leaks with both fib entries
and dst_entry.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make bpf_program__load consistent with other interfaces: use __u32
instead of u32. That in turn fixes build of samples:
In file included from ./samples/bpf/trace_output_user.c:21:0:
./tools/lib/bpf/libbpf.h:132:9: error: unknown type name ‘u32’
u32 kern_version);
^
Fixes: commit 29cd77f416 ("libbpf: Support loading individual progs")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Rename include guards to have consistent names "__LIBBPF_<header_name>".
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Vitaly Kuznetsov