The tpf_min (1/100) and tpf_max (100/1) are used as the lowest and the
highest allowable value for the desired frame period in
vivid_vid_cap_s_parm().
But the comparison between these values is unnecessary because the compared
value is already chosen from webcam_intervals[] (from 1/60 to 1/1).
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
We were getting the codec interface through a proxy function that does
not bring anything compared to just accessing the interface definition
directly, so just do that. Also make the decoder interfaces const.
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The interface used to communicate with the firmware casts pointers
into unsigned longs and back again in order to store private
references, all of this for pointers that remain purely in the kernel.
Replace these unsigned longs with void pointers to make the code a bit
sturdier and easier to follow.
Also simplify some interfaces by removing arguments that could be
infered from others.
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fix checkpatch alignment warning]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Remove redundant Makefile rules (vimc_capture-objs, ...).
Stop exposing vimc-{common, streamer} as modules, since there's no use
case where they would be individually added/removed from Vimc. As
consequence, remove MODULE_ macros from vimc-{common, streamer}.
`-objs` is fitted for building host programs, change to `-y`, more
straightforward for device drivers.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Suggested-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fix typo on "tranforming". Add a line break so it keeps under 80 columns.
Fix typo on "[it] need".
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This paragraph was added by commit a42b57f5aa ("V4L/DVB: Documentation:
add v4l2-controls.txt documenting the new controls API") back in 2010, when
the controls API has been improved. Nowadays it is a bit anachronistic, so
remove it.
The same information is stated in up-to-date wording a few paragraphs later
> You’re done! And this is sufficient for most of the drivers we have. No
> need to do any validation of control values, or implement QUERYCTRL,
> QUERY_EXT_CTRL and QUERYMENU. And G/S_CTRL as well as G/TRY/S_EXT_CTRLS
> are automatically supported.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The tutorial in this section is almost complete, add the one missing bit.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
All these code blocks contain C code, enable C formatting for a nicer
reading.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This section lacks links to functions. Add one to simplify reading.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The code snippet showing how to add controls to the driver’s top-level
struct is present twice, but only the second time it is split in the V4L2
and subdev cases. Consolidate everything at the beginning.
Also remove the "Where foo->bar is of type struct baz" sentences, this
obvious from the code.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This section lacks links to struct definitions. Add one where each struct
is introduced.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fix indentation in example C code.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Mentioning :ref:`VIDIOC_QUERYCTRL` renders all the three related ioctls.
Explicitly adding VIDIOC_QUERY_EXT_CTRL and VIDIOC_QUERYMENU will make
them render twice, so remove them
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Since the beginning the second clock ('special', 'sclk') was optional and
it is not available on some variants of Exynos SoCs (i.e. Exynos5420 with
v7 of MFC hardware).
However commit 1bce6fb3ed ("[media] s5p-mfc: Rework clock handling")
made handling of all specified clocks mandatory. This patch restores
original behavior of the driver and fixes its operation on
Exynos5420 SoCs.
Fixes: 1bce6fb3ed ("[media] s5p-mfc: Rework clock handling")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Both MESON AO CEC and MESON VIDEO DECODER point to the wrong linux-media
mailing list. Update it to linux-media@vger.kernel.org.
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fix v4l2_fourcc define to use "U" cast to avoid shifting signed 32-bit
value by 31 bits problem. This isn't a problem for kernel builds with
gcc.
This could be problem since this header is part of public API which
could be included for builds using compilers that don't handle this
condition safely resulting in undefined behavior.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fix MEDIA_ENT_ID_FLAG_NEXT to use "U" cast to avoid shifting signed
32-bit value by 31 bits problem. This isn't a problem for kernel builds
with gcc.
This could be problem since this header is part of public API which
could be included for builds using compilers that don't handle this
condition safely resulting in undefined behavior.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
After the rework of the Gen2 file operations it's now trivial to merge
the Gen2 and Gen3 versions.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The function no longer serve a purpose as most tasks it performed have
been refactored, fold what remains of it into the only caller. While at
it add error checking for v4l2_ctrl_handler_setup().
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The two power helpers are now only dealing with the parallel subdevice,
merge them into a single rvin_power_parallel() helper to reduce code
duplication.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The helpers rvin_power_{on,off} deal with both VIN and the parallel
subdevice power. This makes it hard to merge the Gen2 and Gen3
open/release functions. Move the VIN power handling directly to the
open/release functions to prepare for the merge.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The format is already synced when the subdevice is bound, there is no
need to do do it every time the video device is opened.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The user should be allowed to break waiting for the lock when opening
the video device.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Runtime PM is already enabled unconditionally when the driver is probed
and disabled when it's removed. There is no point in doing it again for
Gen2 when opening and closing the video device.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The driver does not implement runtime resume and suspend function so
there is little point in trying to call them. This is a leftover from
the drivers soc_camera beginnings.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When building with CONFIG_VIDEO_ADV7511 and CONFIG_DRM_I2C_ADV7511
enabled as loadable modules, we see the following warning:
drivers/gpu/drm/bridge/adv7511/adv7511.ko
drivers/media/i2c/adv7511.ko
Rework so that the file is named adv7511-v4l2.c.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The pointer mpeg12 is being initialized however that value is never
read and mpeg12 is being re-assigned almost immediately afterwards.
Remove the redundant initialization.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fixed issues that can lead to potential bugs.
Cleanup order in the driver
Taking into consideration std control creation can fail
mutex_destroy call
changing controller_formats with const specifier
some cosmetic cleanups
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This splits the Atmel ISC driver into a common base: atmel-isc-base.c
and the driver probe/dt part , atmel-sama5d2-isc.c
This is needed to keep a common ground for the sensor controller which will
be reused.
The atmel-isc will use the common symbols inside the atmel-isc-base
Future driver will also use the same symbols and redefine different aspects,
for a different version of the ISC.
This is done to avoid complete code duplication by creating a totally
different driver for the new variant of the ISC.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: folded 'atmel: atmel-sama5d2-isc: fixed checkpatch warnings' into this patch]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When the upstream endpoint is neither a mux nor a CSI2 module, just get
the source pad directly upstream from the CSI.
Reported-by: Sebastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When the application calls VIDIOC_DQBUF with the DMABUF memory type, the
v4l2_buffer structure (or v4l2_plane structures) are filled with DMA-buf
file descriptors. However, the current documentation does not explain
whether those are new file descriptors referring to the same DMA-bufs or
just the same integers as passed to VIDIOC_QBUF back in time. Clarify
the documentation that it's the latter.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Use the newly introduced vb2_get_buffer API and avoid
accessing buffers in the queue directly.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Use the newly introduced vb2_get_buffer API and avoid
accessing buffers in the queue directly.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fixed checkpatch alignment warning]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Use the newly introduced vb2_get_buffer API and avoid
accessing buffers in the queue directly.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Some drivers need to access a vb2 buffer from its
queue index. Introduce an accessor to abstract this,
and avoid drivers from accessing private members.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There are three error return paths that don't kfree params causing a
memory leak. Fix this by adding an error return path that kfree's
params before returning. Also add a check to see params failed to
be allocated.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Thus the address of "&ctx->dev->variant->codec_ops[codec_mode]"
can't possibly be NULL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
[hverkuil-cisco@xs4all.nl: rebased after rockchip/vpu -> hantro rename]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
These two control types don't really need a default value,
as they are not expected to carry any value.
However, it's slightly clearer to initialize them explicitly
instead of falling back to the switch default.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Gj1MeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGctkH/0At3+SQPY2JJSy8
i6+TDeytFx9OggeGLPHChRfehkAlvMb/kd34QHnuEvDqUuCAMU6HZQJFKoK9mvFI
sDJVayPGDSqpm+iv8qLpMBPShiCXYVnGZeVfOdv36jUswL0k6wHV1pz4avFkDeZa
1F4pmI6O2XRkNTYQawbUaFkAngWUCBG9ECLnHJnuIY6ohShBvjI4+E2JUaht+8gO
M2h2b9ieddWmjxV3LTKgsK1v+347RljxdZTWnJ62SCDSEVZvsgSA9W2wnebVhBkJ
drSmrFLxNiM+W45mkbUFmQixRSmjv++oRR096fxAnodBxMw0TDxE1RiMQWE6rVvG
N6MC6xA=
=+B0P
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rc5' into patchwork
Linux 5.2-rc5
There are some media fixes on -rc5, so merge from it at media
devel tree.
* tag 'v5.2-rc5': (210 commits)
Linux 5.2-rc5
x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback
Smack: Restore the smackfsdef mount option and add missing prefixes
ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper()
module: Fix livepatch/ftrace module text permissions race
tracing/uprobe: Fix obsolete comment on trace_uprobe_create()
tracing/uprobe: Fix NULL pointer dereference in trace_uprobe_create()
tracing: Make two symbols static
tracing: avoid build warning with HAVE_NOP_MCOUNT
tracing: Fix out-of-range read in trace_stack_print()
gfs2: Fix rounding error in gfs2_iomap_page_prepare
x86/kasan: Fix boot with 5-level paging and KASAN
timekeeping: Repair ktime_get_coarse*() granularity
Revert "ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops"
mm/devm_memremap_pages: fix final page put race
PCI/P2PDMA: track pgmap references per resource, not globally
lib/genalloc: introduce chunk owners
PCI/P2PDMA: fix the gen_pool_add_virt() failure path
mm/devm_memremap_pages: introduce devm_memunmap_pages
drivers/base/devres: introduce devm_release_action()
...
The IR signal to control the Panasonic ACXA75C00600 air conditioner has
439 pulse/spaces. Increase limit to make it possible to transmit signal.
Reported-by: Takashi Kanamaru <neuralassembly@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
If RC_CORE is not set, building fails:
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Sean Young <sean@mess.org>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There two callers of stv090x_setup_compound manage the allocation and
freeing if state there is an error condition from stv090x_setup_compound.
Currently function stv090x_setup_compound also frees the state object
too, leading to a double free in the callers of this function. Fix
this by removing the extraneous free in stv090x_setup_compound and just
leave the callers handle the allocation/free'ing.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Pull x86 fixes from Thomas Gleixner:
"The accumulated fixes from this and last week:
- Fix vmalloc TLB flush and map range calculations which lead to
stale TLBs, spurious faults and other hard to diagnose issues.
- Use fault_in_pages_writable() for prefaulting the user stack in the
FPU code as it's less fragile than the current solution
- Use the PF_KTHREAD flag when checking for a kernel thread instead
of current->mm as the latter can give the wrong answer due to
use_mm()
- Compute the vmemmap size correctly for KASLR and 5-Level paging.
Otherwise this can end up with a way too small vmemmap area.
- Make KASAN and 5-level paging work again by making sure that all
invalid bits are masked out when computing the P4D offset. This
worked before but got broken recently when the LDT remap area was
moved.
- Prevent a NULL pointer dereference in the resource control code
which can be triggered with certain mount options when the
requested resource is not available.
- Enforce ordering of microcode loading vs. perf initialization on
secondary CPUs. Otherwise perf tries to access a non-existing MSR
as the boot CPU marked it as available.
- Don't stop the resource control group walk early otherwise the
control bitmaps are not updated correctly and become inconsistent.
- Unbreak kgdb by returning 0 on success from
kgdb_arch_set_breakpoint() instead of an error code.
- Add more Icelake CPU model defines so depending changes can be
queued in other trees"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback
x86/kasan: Fix boot with 5-level paging and KASAN
x86/fpu: Don't use current->mm to check for a kthread
x86/kgdb: Return 0 from kgdb_arch_set_breakpoint()
x86/resctrl: Prevent NULL pointer dereference when local MBM is disabled
x86/resctrl: Don't stop walking closids when a locksetup group is found
x86/fpu: Update kernel's FPU state before using for the fsave header
x86/mm/KASLR: Compute the size of the vmemmap section properly
x86/fpu: Use fault_in_pages_writeable() for pre-faulting
x86/CPU: Add more Icelake model numbers
mm/vmalloc: Avoid rare case of flushing TLB with weird arguments
mm/vmalloc: Fix calculation of direct map addr range
Pull timer fixes from Thomas Gleixner:
"A set of small fixes:
- Repair the ktime_get_coarse() functions so they actually deliver
what they are supposed to: tick granular time stamps. The current
code missed to add the accumulated nanoseconds part of the
timekeeper so the resulting granularity was 1 second.
- Prevent the tracer from infinitely recursing into time getter
functions in the arm architectured timer by marking these functions
notrace
- Fix a trivial compiler warning caused by wrong qualifier ordering"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Repair ktime_get_coarse*() granularity
clocksource/drivers/arm_arch_timer: Don't trace count reader functions
clocksource/drivers/timer-ti-dm: Change to new style declaration
Pull RAS fixes from Thomas Gleixner:
"Two small fixes for RAS:
- Use a proper search algorithm to find the correct element in the
CEC array. The replacement was a better choice than fixing the
crash causes by the original search function with horrible duct
tape.
- Move the timer based decay function into thread context so it can
actually acquire the mutex which protects the CEC array to prevent
corruption"
* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
RAS/CEC: Convert the timer callback to a workqueue
RAS/CEC: Fix binary search function
Couple of driver enumeration issues have been fixed for Mellanox.
ASUS laptops got a regression with backlight, which is fixed now.
Dell computers got a wrong mode (tablet versus laptop) after resume,
that is fixed now.
The following is an automated git shortlog grouped by driver:
asus-wmi:
- Only Tell EC the OS will handle display hotkeys from asus_nb_wmi
intel-vbtn:
- Report switch events when event wakes device
mlx-platform:
- Fix parent device in i2c-mux-reg device registration
platform/mellanox:
- mlxreg-hotplug: Add devm_free_irq call to remove flow
-----BEGIN PGP SIGNATURE-----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=/H6h
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.2-3' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Andy Shevchenko:
- fix a couple of Mellanox driver enumeration issues
- fix ASUS laptop regression with backlight
- fix Dell computers that got a wrong mode (tablet versus laptop) after
resume
* tag 'platform-drivers-x86-v5.2-3' of git://git.infradead.org/linux-platform-drivers-x86:
platform/mellanox: mlxreg-hotplug: Add devm_free_irq call to remove flow
platform/x86: mlx-platform: Fix parent device in i2c-mux-reg device registration
platform/x86: intel-vbtn: Report switch events when event wakes device
platform/x86: asus-wmi: Only Tell EC the OS will handle display hotkeys from asus_nb_wmi
Here are some small USB driver fixes for 5.2-rc5
Nothing major, just some small gadget fixes, usb-serial new device ids,
a few new quirks, and some small fixes for some regressions that have
been found after the big 5.2-rc1 merge.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXQUTIg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykPJQCfZdiElw3N35bKVf7bhruxSb5DevEAni96uDM7
jSOSEB/EWqxZEy0ZjU7J
=cKx4
-----END PGP SIGNATURE-----
Merge tag 'usb-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 5.2-rc5
Nothing major, just some small gadget fixes, usb-serial new device
ids, a few new quirks, and some small fixes for some regressions that
have been found after the big 5.2-rc1 merge.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: Make sure an alt mode exist before getting its partner
usb: gadget: udc: lpc32xx: fix return value check in lpc32xx_udc_probe()
usb: gadget: dwc2: fix zlp handling
usb: dwc2: Set actual frame number for completed ISOC transfer for none DDMA
usb: gadget: udc: lpc32xx: allocate descriptor with GFP_ATOMIC
usb: gadget: fusb300_udc: Fix memory leak of fusb300->ep[i]
usb: phy: mxs: Disable external charger detect in mxs_phy_hw_init()
usb: dwc2: Fix DMA cache alignment issues
usb: dwc2: host: Fix wMaxPacketSize handling (fix webcam regression)
USB: Fix chipmunk-like voice when using Logitech C270 for recording audio.
USB: usb-storage: Add new ID to ums-realtek
usb: typec: ucsi: ccg: fix memory leak in do_flash
USB: serial: option: add Telit 0x1260 and 0x1261 compositions
USB: serial: pl2303: add Allied Telesis VT-Kit3
USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS mode
One fix for a regression introduced by our 32-bit KASAN support, which broke
booting on machines with "bootx" early debugging enabled.
A fix for a bug which broke kexec on 32-bit, introduced by changes to the 32-bit
STRICT_KERNEL_RWX support in v5.1.
Finally two fixes going to stable for our THP split/collapse handling,
discovered by Nick. The first fixes random crashes and/or corruption in guests
under sufficient load.
Thanks to:
Nicholas Piggin, Christophe Leroy, Aaro Koskinen, Mathieu Malaterre.
-----BEGIN PGP SIGNATURE-----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=MXJI
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One fix for a regression introduced by our 32-bit KASAN support, which
broke booting on machines with "bootx" early debugging enabled.
A fix for a bug which broke kexec on 32-bit, introduced by changes to
the 32-bit STRICT_KERNEL_RWX support in v5.1.
Finally two fixes going to stable for our THP split/collapse handling,
discovered by Nick. The first fixes random crashes and/or corruption
in guests under sufficient load.
Thanks to: Nicholas Piggin, Christophe Leroy, Aaro Koskinen, Mathieu
Malaterre"
* tag 'powerpc-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32s: fix booting with CONFIG_PPC_EARLY_DEBUG_BOOTX
powerpc/64s: __find_linux_pte() synchronization vs pmdp_invalidate()
powerpc/64s: Fix THP PMD collapse serialisation
powerpc: Fix kexec failure on book3s/32
- Out of range read of stack trace output
- Fix for NULL pointer dereference in trace_uprobe_create()
- Fix to a livepatching / ftrace permission race in the module code
- Fix for NULL pointer dereference in free_ftrace_func_mapper()
- A couple of build warning clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXQToxhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qusmAP4/mmJPgsDchnu5ui0wB8BByzJlsPn8
luXFDuqI4f34zgD+JCmeYbj5LLh98D9XkaaEgP4yz3yKsWeSdwWPCU0vTgo=
=M/+E
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Out of range read of stack trace output
- Fix for NULL pointer dereference in trace_uprobe_create()
- Fix to a livepatching / ftrace permission race in the module code
- Fix for NULL pointer dereference in free_ftrace_func_mapper()
- A couple of build warning clean ups
* tag 'trace-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper()
module: Fix livepatch/ftrace module text permissions race
tracing/uprobe: Fix obsolete comment on trace_uprobe_create()
tracing/uprobe: Fix NULL pointer dereference in trace_uprobe_create()
tracing: Make two symbols static
tracing: avoid build warning with HAVE_NOP_MCOUNT
tracing: Fix out-of-range read in trace_stack_print()
Akinobu Mita