It doesn't need to be changed, make it const. The string literals should
anyway be referred to as const data.
The following gets moved to rodata section:
0000000000000080 l O .rodata 0000000000001c00 cmd_info
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
For perfomance purpose, scanning of non-privileged batch buffer is turned
off by default. But for debugging purpose, it can be turned on via debugfs.
After scanning, we submit the original non-privileged batch buffer into
hardware, so that the scanning is only a peeking window of guest submitted
commands and will not affect the execution results.
v4:
- refine debugfs print format&content (zhenyu wang)
- print engine id instread of engine name to prevent potential memory leak
in debugfs warning message. (zhenyu wang)
v3:
- change vgpu->scan_nonprivbb from type bool to u32, so it is able to
selectively turn on/off scanning of non-privileged batch buffer on engine
level. e.g.
if vgpu->scan_nonprivbb=3, then it will scan non-privileged batch buffer
on engine 0 and 1.
- in debugfs interface to set vgpu->scan_nonprivbb, print warning message
to warn user and explicitly tell state change in kernel log (zhenyu wang)
v2:
- rebase
- update comments for start_gma_offset (henry)
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJauCZfAAoJEHm+PkMAQRiGWGUH/2rhdQDkoJpYWnjaQkolECG8
MxpGE7nmIIHxQcbSDdHTGJ8IhVm6Z5wZ7ym/PwCDTT043Y1y341sJrIwL2/nTG6d
HVidk8hFvgN6QzlzVAHT3ZZMII/V9Zt+VV5SUYLGnPAVuJNHo/6uzWlTU5g+NTFo
IquFDdQUaGBlkKqby+NoAFnkV1UAIkW0g22cfvPnlO5GMer0gusGyVNvVp7TNj3C
sqj4Hvt3RMDLMNe9RZ2pFTiOD096n8FWpYftZneUTxFImhRV3Jg5MaaYZm9SI3HW
tXrv/LChT/F1mi5Pkx6tkT5Hr8WvcrwDMJ4It1kom10RqWAgjxIR3CMm448ileY=
=YKUG
-----END PGP SIGNATURE-----
Backmerge tag 'v4.16-rc7' into drm-next
Linux 4.16-rc7
This was requested by Daniel, and things were getting
a bit hard to reconcile, most of the conflicts were
trivial though.
This is a another big one and the GVT shadow page management code is
heavily refined.
The new code only use struct intel_vgpu_ppgtt_spt to represent a vgpu
shadow page table - w/ or wo/ a guest page associated with. A pure shadow
page (no guest page associated) will be used to shadow splited 2M huge
gtt. In this case, the spt.guest_page.gfn should be a zero.
To search a existed shadow page table, we have two new interfaces:
- intel_vgpu_find_spt_by_gfn(), find a spt by guest gfn. It must not
be a pure spt.
- intel_vgpu_find_spt_by_mfn, Find the spt using shadow page mfn in
shadowed PTE.
The oos_page management is remained as what is was.
v2: Split some changes into small standalone patches.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This is a big one and the GVT shadow graphic memory management code is
heavily refined. The new code is more straightforward with less code.
The struct intel_vgpu_mm is restructured to be clearly defined, use
accurate names and some of the original fields are removed which are
really redundant.
Now we only manage ppgtt mm object with mm->ppgtt_mm.lru_list. No need
to mix ppgtt and ggtt together, since one vGPU only has one ggtt object.
v4: Don't invoke ppgtt_free_all_shadow_page before intel_vgpu_destroy_all_ppgtt_mm.
v3: Add GVT_RING_CTX_NR_PDPS to avoid confusing about the PDPs.
v2: Split some changes into small standalone patches.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Fix one typo of render_mmio trace, exchange the mmio value of old and new.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Refine trace_render_mmio to show the vm id before and after vgpu switch,
tag host id as '0', this patch will be used in the future patch for refine
mocs switch policy.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Currently gvt dmesg is so heavy at drm.debug=0x2 that guest and
host almost couldn't run on xengt.
This patch transfer these repeated messages into trace, so dmesg
is light at drm.debug=0x2, and user could get the target message through
trace event and trace filter.
Suggested-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The gvt:gvt_command trace involve unnecessary overhead even this trace is
not enabled. We need improve it.
The kernel trace infrastructure provide a full api to define a trace event.
We should leverage them if possible. And one important thing is that a trace
point should store raw data but not format string.
This patch include two part work:
1) Refactor the gvt_command trace definition, including:
o only store raw trace data.
o use __dynamic_array() to declare a variable size buffer.
o use __print_array() to format raw cmd data.
o rename vm_id as vgpu_id.
2) Improve the trace invoking, including:
o remove the cycles calculation for handler. We can get this data
by any perf tool.
o do not make a backup for raw cmd data which just doesn't make sense.
With this patch, this trace has no overhead if it is not enabled. And we are
trace style now.
The final output example:
gvt workload 0-211 [000] ...1 120.555964: gvt_command: vgpu1 ring 0: buf_type 0, ip_gma e161e880, raw cmd {0x4000000}
gvt workload 0-211 [000] ...1 120.556014: gvt_command: vgpu1 ring 0: buf_type 0, ip_gma e161e884, raw cmd {0x7a000004,0x1004000,0xe1511018,0x0,0x7d,0x0}
gvt workload 0-211 [000] ...1 120.556062: gvt_command: vgpu1 ring 0: buf_type 0, ip_gma e161e89c, raw cmd {0x7a000004,0x140000,0x0,0x0,0x0,0x0}
gvt workload 0-211 [000] ...1 120.556110: gvt_command: vgpu1 ring 0: buf_type 0, ip_gma e161e8b4, raw cmd {0x10400002,0xe1511018,0x0,0x7d}
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This patch introduces a command scanner to scan guest command buffers.
Signed-off-by: Yulei Zhang <yulei.zhang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The vGPU graphics memory emulation framework is responsible for graphics
memory table virtualization. Under virtualization environment, a VM will
populate the page table entry with guest page frame number(GPFN/GFN), while
HW needs a page table filled with MFN(Machine frame number). The
relationship between GFN and MFN(Machine frame number) is managed by
hypervisor, while GEN HW doesn't have such knowledge to translate a GFN.
To solve this gap, shadow GGTT/PPGTT page table is introdcued.
For GGTT, the GFN inside the guest GGTT page table entry will be translated
into MFN and written into physical GTT MMIO registers when guest write
virtual GTT MMIO registers.
For PPGTT, a shadow PPGTT page table will be created and write-protected
translated from guest PPGTT page table. And the shadow page table root
pointers will be written into the shadow context after a guest workload
is shadowed.
vGPU graphics memory emulation framework consists:
- Per-GEN HW platform page table entry bits extract/de-extract routines.
- GTT MMIO register emulation handlers, which will call hypercall to do
GFN->MFN translation when guest write GTT MMIO register
- PPGTT shadow page table routines, e.g. shadow create/destroy/out-of-sync
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Jani Nikula