There's a false positive warning there:
drivers/media/i2c/tda9840.c:79 tda9840_status() error: uninitialized symbol 'byte'.
Change the code to match our coding style, in order to fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The current I2C error handling logic makes static analyzers
confused:
drivers/media/usb/em28xx/em28xx-input.c:96 em28xx_get_key_terratec() error: uninitialized symbol 'b'.
Change it to match the coding style we're using elsewhere.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Change the logic there to avoid casting, solving this warning:
drivers/media/pci/saa7134/saa7134-alsa.c:276 saa7134_alsa_dma_init() warn: argument 3 to %08lx specifier is cast from pointer
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of using an ancillary function to avoid duplicating
a small portion of code that copies data either to kernelspace
or between userspace-kernelspace, duplicate the code,
as it prevents static analyzers to complain about it:
drivers/media/pci/solo6x10/solo6x10-g723.c:260:46: warning: cast removes address space of expression
The hole idea of using __user is to make sure that the code is
doing the right thing with address space, so there's no
sense on use casting.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
While the code is correct, it produces this warning:
drivers/media/i2c/ir-kbd-i2c.c:593 zilog_ir_format() error: buffer overflow 'code_block->codes' 61 <= 173
As static analyzers may be tricked by arithmetic expressions on
comparisions. So, change the order, in order to shut up this
false-positive warning.
That also makes easier for humans to understand that it won't
be trying to go past buffer size.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The current I2C error handling logic makes static analyzers
confused, and it doesn't follow the coding style we're using:
drivers/media/i2c/ir-kbd-i2c.c:180 get_key_pixelview() error: uninitialized symbol 'b'.
drivers/media/i2c/ir-kbd-i2c.c:224 get_key_knc1() error: uninitialized symbol 'b'.
drivers/media/i2c/ir-kbd-i2c.c:226 get_key_knc1() error: uninitialized symbol 'b'.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Currently, the code produces those false-positives:
drivers/media/pci/saa7134/saa7134-input.c:203 get_key_msi_tvanywhere_plus() error: uninitialized symbol 'b'.
drivers/media/pci/saa7134/saa7134-input.c:251 get_key_kworld_pc150u() error: uninitialized symbol 'b'.
drivers/media/pci/saa7134/saa7134-input.c:275 get_key_purpletv() error: uninitialized symbol 'b'.
Improve the error handling code, making it to look like our
coding style.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
drivers/media/pci/ivtv/ivtvfb.c:349 ivtvfb_prep_frame() warn: argument 3 to %08lx specifier is cast from pointer
drivers/media/pci/ivtv/ivtvfb.c:360 ivtvfb_prep_frame() warn: argument 3 to %08lx specifier is cast from pointer
drivers/media/pci/ivtv/ivtvfb.c:363 ivtvfb_prep_frame() warn: argument 4 to %08lx specifier is cast from pointer
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Just use %p. Fixes this warning:
drivers/media/v4l2-core/videobuf-dma-sg.c:247 videobuf_dma_init_kernel() warn: argument 2 to %08lx specifier is cast from pointer
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The logic with gets a p2m_id is more complex than needed,
causing false positives with static analyzers:
drivers/media/pci/solo6x10/solo6x10-p2m.c:81 solo_p2m_dma_desc() error: buffer overflow 'solo_dev->p2m_dev' 4 <= s32max
Make it simpler and use unsigned int.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The error handling logic at get_key_pv951() is a little bit
akward, with produces this false positive warning:
drivers/media/pci/bt8xx/bttv-input.c:344 get_key_pv951() error: uninitialized symbol 'b'.
Do a cleanup. As a side effect, it also improves its coding
style.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The error handling logic at tvaudio is broken on several ways,
as it doesn't really check right when an error occurs.
Change it to return the proper error code from read/write
routines and fix the errors on reads.
Shuts up the following warnings:
drivers/media/i2c/tvaudio.c:222 chip_read() error: uninitialized symbol 'buffer'.
drivers/media/i2c/tvaudio.c:223 chip_read() error: uninitialized symbol 'buffer'.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
drivers/media/dvb-frontends/sp887x.c:179 sp887x_initial_setup() error: memcpy() '&buf[2]' too small (30 vs 16384)
This is actually a false alarm, but reverting the check order
makes not only for humans to review the code, but also cleans
the warning.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
While the code there is right, it produces three false positives:
drivers/media/v4l2-core/v4l2-ioctl.c:2868 video_usercopy() error: copy_from_user() 'parg' too small (128 vs 16383)
drivers/media/v4l2-core/v4l2-ioctl.c:2868 video_usercopy() error: copy_from_user() 'parg' too small (128 vs 16383)
drivers/media/v4l2-core/v4l2-ioctl.c:2876 video_usercopy() error: memset() 'parg' too small (128 vs 16383)
Store the ioctl size on a cache var, in order to suppress those.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are some troubles on this driver with respect to the usage
of __be16 and __b32 macros:
drivers/media/i2c/ov5670.c:1857:27: warning: incorrect type in initializer (different base types)
drivers/media/i2c/ov5670.c:1857:27: expected unsigned short [unsigned] [usertype] reg_addr_be
drivers/media/i2c/ov5670.c:1857:27: got restricted __be16 [usertype] <noident>
drivers/media/i2c/ov5670.c:1880:16: warning: cast to restricted __be32
drivers/media/i2c/ov5670.c:1880:16: warning: cast to restricted __be32
drivers/media/i2c/ov5670.c:1880:16: warning: cast to restricted __be32
drivers/media/i2c/ov5670.c:1880:16: warning: cast to restricted __be32
drivers/media/i2c/ov5670.c:1880:16: warning: cast to restricted __be32
drivers/media/i2c/ov5670.c:1880:16: warning: cast to restricted __be32
drivers/media/i2c/ov5670.c:1901:13: warning: incorrect type in assignment (different base types)
drivers/media/i2c/ov5670.c:1901:13: expected unsigned int [unsigned] [usertype] val
drivers/media/i2c/ov5670.c:1901:13: got restricted __be32 [usertype] <noident>
Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As warned:
drivers/media/platform/rockchip/rga/rga.c:210:16: warning: symbol 'formats' was not declared. Should it be static?
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The logic at find_format() is a little bit confusing even for
humans, and it tricks static code analyzers:
drivers/staging/media/imx/imx-media-utils.c:259 find_format() error: buffer overflow 'array' 14 <= 20
Rewrite the logic in a way that it makes it clearer to understand,
while prevent static analyzers to produce false positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Document the core of the debugfs CEC error injection ABI.
The driver specific commands are documented elsewhere and
this file points to that documentation.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The CEC Pin framework adds support for Error Injection.
Document all the error injections commands and how to use it.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
It turns out that the struct cec_fh event buffer size of 64 events
(64 for CEC_EVENT_PIN_CEC_LOW and 64 for _HIGH) is too small. It's
about 160 ms worth of events and if the Raspberry Pi is busy, then it
might take too long for the application to be scheduled so that it can
drain the pending events. Increase these buffers to 800 events which
is at least 2 seconds worth of events.
There is also a FIFO in between the interrupt and the cec-pin thread.
The thread passes the events on to the CEC core. It is important that
should this FIFO fill up the cec core will be informed that events
have been lost so this can be communicated to the user by setting
CEC_EVENT_FL_DROPPED_EVENTS.
It is very hard to debug CEC problems if events were lost without
informing the user of that fact.
If events were dropped due to the FIFO filling up, then the debugfs
status file will let you know how many events were dropped.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Keep track of the number of short or long start bits, the number
of short or long data bits and the number of initiated or detected
low drive conditions.
Show this information in the status debugfs log.
Helpful when debugging, particularly when doing error injection
as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Implement all the error injection commands.
The state machine gets new states for the various error situations,
helper functions are added to detect whether an error injection is
active and the actual error injections are implemented.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add support to the CEC Pin framework to parse error injection commands
and to show them.
The next patch will do the actual implementation of this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This function will be needed for injecting a custom pulse.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add two new ops (error_inj_show and error_inj_parse_line) to support
error injection functionality for CEC adapters. If both are present,
then the core will add a new error-inj debugfs file that can be used
to see the current error injection commands and to set error injection
commands.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This protocol was recently added and causes warnings.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The values of enc_y_addr and enc_c_addr are initialized by
s5p_mfc_hw_call(), but, in thesis, this macro might be doing
nothing, if the get_enc_frame_buffer() is not declared.
That causes those GCC warnings:
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:1242 enc_post_frame_start() error: uninitialized symbol 'enc_y_addr'.
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:1243 enc_post_frame_start() error: uninitialized symbol 'enc_c_addr'.
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:1256 enc_post_frame_start() error: uninitialized symbol 'enc_y_addr'.
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:1257 enc_post_frame_start() error: uninitialized symbol 'enc_c_addr'.
Change the logic by initializing those constants to zero,
with should hopefully do the right thing.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Valid range for those controls is specified in documentation as [0, 51],
so initialize the controls to such range rather than [INT_MIN, INT_MAX].
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When value of V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP or V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP
controls is changed we should update range of a set of HEVC quantization
parameter v4l2 controls as specified in the HEVC controls documentation.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Provide proper (real) struct device to request_firmware() call. This fixes
following error messages:
(NULL device *): Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2
(NULL device *): Direct firmware load for s5p-mfc-v6.fw failed with error -2
into a bit more meaningful ones:
s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2
s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add support for codec definition and corresponding buffer
requirements for VP9 decoder.
Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add support for codec definition and corresponding buffer
requirements for HEVC decoder.
Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
After MFC v8.0, mfc f/w lets the driver know how much scratch buffer
size is required for decoder. If mfc f/w has the functionality,
E_MIN_SCRATCH_BUFFER_SIZE, driver can know how much scratch buffer size
is required for encoder too.
Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Adding the support for MFC v10.10, with new register file and
necessary hw control, decoder, encoder and structural changes.
Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch renames macro IS_MFCV8 to IS_MFCV8_PLUS so that the MFCv8
code can be resued for MFCv10.10 support. Since the MFCv8 specific code
holds good for MFC v10.10 also.
Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Mauro Carvalho Chehab