Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add new GSMI commands (GSMI_CMD_LOG_S0IX_SUSPEND = 0xa,
GSMI_CMD_LOG_S0IX_RESUME = 0xb) that allow firmware to log any
information during S0ix suspend/resume paths.
Traditional ACPI suspend S3 involves BIOS both during the suspend and
the resume paths. However, modern suspend type like S0ix does not
involve firmware on either of the paths. This command gives the
firmware an opportunity to log any required information about the
suspend and resume operations e.g. wake sources.
Additionally, this change adds a module parameter to allow platforms
to specifically enable S0ix logging if required. This prevents any
other platforms from unnecessarily making a GSMI call which could have
any side-effects.
Tested by verifying that wake sources are correctly logged in eventlog.
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Rajat Jain <rajatja@chromium.org>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
[zwisler: update changelog for upstream]
Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of selecting EFI and EFI_VARS automatically when GSMI is
enabled let that portion of the driver be conditionally compiled
if EFI and EFI_VARS are enabled.
This allows the rest of the driver (specifically event log) to
be used if EFI_VARS is not enabled.
To test:
1) verify that EFI_VARS is not automatically selected when
CONFIG_GOOGLE_GSMI is enabled
2) verify that the kernel boots on Link and that GSMI event log
is still available and functional
3) specifically boot the kernel on Alex to ensure it does not
try to load efivars and that gsmi also does not load because it
is not in the supported DMI table
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Olof Johansson <olofj@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Filipe Brandenburger <filbranden@chromium.org>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
[zwisler: update changelog for upstream]
Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs handler should return the number of bytes consumed, which in the
case of a successful write is the entire buffer. Also fix a bug where
param.data_len was being set to (count - (2 * sizeof(u32))) instead of just
(count - sizeof(u32)). The latter is correct because we skip over the
leading u32 which is our param.type, but we were also incorrectly
subtracting sizeof(u32) on the line where we were actually setting
param.data_len:
param.data_len = count - sizeof(u32);
This meant that for our example event.kernel_software_watchdog with total
length 10 bytes, param.data_len was just 2 prior to this change.
To test, successfully append an event to the log with gsmi sysfs.
This sample event is for a "Kernel Software Watchdog"
> xxd -g 1 event.kernel_software_watchdog
0000000: 01 00 00 00 ad de 06 00 00 00
> cat event.kernel_software_watchdog > /sys/firmware/gsmi/append_to_eventlog
> mosys eventlog list | tail -1
14 | 2012-06-25 10:14:14 | Kernl Event | Software Watchdog
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
[zwisler: updated changelog for 2nd bug fix and upstream]
Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The structure gsmi_dev is local to the source and does not need to be
in global scope, so make it static.
Cleans up sparse warning:
symbol 'gsmi_dev' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
... and __initconst if applicable.
Based on similar work for an older kernel in the Grsecurity patch.
[JD: fix toshiba-wmi build]
[JD: add htcpen]
[JD: move __initconst where checkscript wants it]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
The dma_pool_destroy() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Mike Waychison <mikew@google.com>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Starting in commit e14ab23dde,
efivars_sysfs_init() is called both by itself as an init function,
and by drivers/firmware/google/gsmi.c gsmi_init().
This results in runtime warnings such as the following:
[ 5.651330] WARNING: at fs/sysfs/dir.c:530 sysfs_add_one+0xbd/0xe0()
[ 5.657699] sysfs: cannot create duplicate filename '/firmware/gsmi/vars'
Fixing this by removing the redundant efivars_sysfs_init() call in
gsmi_init().
Tested: booted, checked that /firmware/gsmi/vars was still present and
showed the expected contents.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Mike Waychison <mikew@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver doesn't need to directly access DMA masks if it uses the
platform_device_register_full() API rather than
platform_device_register_simple() - the former function can initialize
the DMA mask appropriately.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The use of strict_strtoul() is not preferred, because strict_strtoul() is
obsolete. Thus, kstrtoul() should be used.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Tom Gundersen <teg@jklm.no>
Cc: Mike Waychison <mikew@google.com>
Acked-by: Mike Waychison <mikew@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There isn't really a formal interface for dealing with EFI variables
or struct efivar_entry. Historically, this has led to various bits of
code directly accessing the generic EFI variable ops, which inherently
ties it to specific EFI variable operations instead of indirectly
using whatever ops were registered with register_efivars(). This lead
to the efivarfs code only working with the generic EFI variable ops
and not CONFIG_GOOGLE_SMI.
Encapsulate everything that needs to access '__efivars' inside an
efivar_entry_* API and use the new API in the pstore, sysfs and
efivarfs code.
Much of the efivars code had to be rewritten to use this new API. For
instance, it is now up to the users of the API to build the initial
list of EFI variables in their efivar_init() callback function. The
variable list needs to be passed to efivar_init() which allows us to
keep work arounds for things like implementation bugs in
GetNextVariable() in a central location.
Allowing users of the API to use a callback function to build the list
greatly benefits the efivarfs code which needs to allocate inodes and
dentries for every variable. It previously did this in a racy way
because the code ran without holding the variable spinlock. Both the
sysfs and efivarfs code maintain their own lists which means the two
interfaces can be running simultaneously without interference, though
it should be noted that because no synchronisation is performed it is
very easy to create inconsistencies. efibootmgr doesn't currently use
efivarfs and users are likely to also require the old sysfs interface,
so it makes sense to allow both to be built.
Reviewed-by: Tom Gundersen <teg@jklm.no>
Tested-by: Tom Gundersen <teg@jklm.no>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Mike Waychison <mikew@google.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
There are currently two implementations of the utf16 string functions.
Somewhat confusingly, they've got different names.
Centralise the functions in efi.h.
Reviewed-by: Tom Gundersen <teg@jklm.no>
Tested-by: Tom Gundersen <teg@jklm.no>
Reviewed-by: Mike Waychison <mikew@google.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Use min_t() macro instead of min() to fix a build warning:
CC drivers/firmware/google/gsmi.o
drivers/firmware/google/gsmi.c: In function ‘gsmi_get_variable’:
drivers/firmware/google/gsmi.c:348: warning: comparison of distinct
pointer types lacks a cast
Signed-off-by: Maxin B. John <maxin.john@gmail.com>
Acked-By: Mike Waychison <mikew@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This file really needs the full module.h header file present, but
was just getting it implicitly before. Fix it up in advance so we
avoid build failures once the cleanup commit is present.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Modify function parameter type to match expected type. Fixes a
build warning:
drivers/firmware/google/gsmi.c:473: warning: initialization from incompatible pointer type
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Mike Waychison <mikew@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes sysfs entries in gsmi_exit() and gsmi_init() error path.
Also move the driver successfully loaded message to the end of gsmi_init()
and return proper error if register_efivars() fails.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The "gsmi" driver bridges userland with firmware specific routines for
accessing hardware.
Currently, this driver only supports NVRAM and eventlog information.
Deprecated functions have been removed from the driver, though their
op-codes are left in place so that they are not re-used.
This driver works by trampolining into the firmware via the smi_command
outlined in the FADT table. Three protocols are used due to various
limitations over time, but all are included herein.
This driver should only ever load on Google boards, identified by either
a "Google, Inc." board vendor string in DMI, or "GOOGLE" in the OEM
strings of the FADT ACPI table. This logic happens in
gsmi_system_valid().
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Aaron Durbin <adurbin@google.com>
Signed-off-by: Mike Waychison <mikew@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Thomas Gleixner