For the case, that we have to capture with a default format, i.e., when the
user doesn't call S_FMT, we have to use the field value according to the
default, configured at open() time.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Currently soc-camera doesn't set up any image format without an explicit S_FMT.
It seems this should be supported, since, for example, capture-example.c from
v4l2-apps by default doesn't issue an S_FMT. This patch configures a default
image format on open().
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As host and camera drivers become more complex, differences between S_FMT and
S_CROP functionality grow, this patch separates them.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Bt819 needs the parent driver to drive a GPIO pin low and high in order to
reset its fifo. Use the new notify callback for this.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Normally the parent device of v4l2_device is used as the video device
node's parent. But if it was not set, then use the parent field in the
video_device struct.
This is needed in the cx88 driver, which has one core v4l2_device but
creates multiple pci devices (one each for raw and mpeg video).
So you cannot associate the core v4l2_device with a particular PCI device,
but you can do that for each video_device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The new support for the CX23885_BOARD_NETUP_DUAL_DVBS2_CI board broke the
existing boards. Interrupts for the netup part were enabled and handled
without testing whether the current board actually had a netup -> instant
and fatal crash.
I've added tests to do this only for the CX23885_BOARD_NETUP_DUAL_DVBS2_CI
board.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Fix a bug where all frame headers were being discarded, instead of being part of the
stream output, on MR97310A cameras.
The frame headers contain information which may be useful in processing
the video output and therefore should be kept and not discarded.
A corresponding patch to the decompression algorithm in
libv4lconvert/mr97310a.c corrects the change in frame offset.
Signed-off-by: Theodore Kilgore <kilgota@auburn.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Setting state->frontend.demodulator_priv to NULL in the event of
a kzalloc error will result in an OOPS. Just remove that line.
Thanks to Matthias Schwarzott for pointing this out.
Cc: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
If the i2c sub-device cannot be found, then we must unregister the i2c_client.
Otherwise this will prevent a possible probe for a different device on that same
address.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
We'll start off with MODULE_VERSION("0.1")
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
small whitespace cleanup - space missing after the *
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The vfl_type field is set by the core, so anything you fill in here will
be overwritten. And it will be set to a VFL_TYPE_ value, not a VID_TYPE_
value which is an obsolete V4L1 type.
Since these V4L1 types have been made unavailable for V4L2 drivers, this
driver stopped compiling.
In this case the fix is just removing this assignment.
Cc: Sakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This include isn't needed and so can be removed.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch adds support for Terratec Cinergy HT PCI MKII with card id 79.
Its more or less a copy of Pinnacle Hybrid PCTV.
Thanks to k1ngf1sher on forum.ubuntuusers.de for the idea to copy that card.
Signed-off-by: Stephan Wienczny <stephan@wienczny.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Print a message in case the new software IRQ watchdog detects a problem.
I choose the info message category, this can be changed if not appropriate.
Cc: Patrick Boettcher <patrick.boettcher@desy.de>
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The videodev module is missing the char-major-81-* alias that would
cause it to be auto-loaded when a device of that type is opened. This
patch adds the alias.
Signed-off-by: Scott James Remnant <scott@canonical.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Call pwc_construct before trying to talk to device to obtain vc interface so
that LED and power setup works the first time the video device is opened.
Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When unloading the cx8800 driver I sometimes get a general protection
fault. Analysis revealed a race in cx88_ir_stop(). It can be solved by
using a delayed work instead of a timer for infrared input polling.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The removal of the timer which polls the infrared input is racy.
Replacing the timer with a delayed work solves the problem.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The removal of the timer which polls the infrared input is racy.
Replacing the timer with a delayed work solves the problem.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The removal of the timer which polls the infrared input is racy.
Replacing the timer with a delayed work solves the problem.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
It reduces the size of the driver over all, and the function names in
strings need to be manually kept up to date while __func__ doesn't.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Many functions had a struct file pointer argument, but all they wants is
the struct zoran_fh pointer from the file's private data. Since every
caller of those functions already has the zoran_fh, just pass the that
instead. This saves a dereference in each function change.
While I'm at it, change the code formatting of affected functions to be
kernel standard style.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
kmalloc() can fail for large video buffers. By default the kernel
complains loudly about allocation failures, but we don't want to
frighten the user, so ask kmalloc() to keep quiet on such failures.
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The lock_norm module parameter doesn't look terribly useful. If you
don't want to change the norm, just don't change it. As a matter of
fact, no other v4l driver has such a parameter.
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The zoran driver had two kinds of buffer descriptors, one for jpg buffers
and one for raw buffers. They were mostly the same with only a couple
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
replace occurances of "HVR1150" with "HVR1120" - this was a typo.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There are no drivers left that call msp3400 with V4L1 commands. Remove it
from this driver.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The code to optimize the usercopy only checked the ioctl NR field. However,
this code is also called for non-V4L2 ioctls (either private or ioctls from
linux/dvb/audio.h and linux/dvb/video.h for decoder drivers like ivtv).
If such an ioctl has the same NR as a V4L2 ioctl, then disaster strikes.
Modified the code to check on the full command ID.
Thanks to Martin Dauskardt for tracing the ivtv breakage to this particular
change.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This driver isn't used in any legacy mode, so no need for v4l2-i2c-drv-legacy.h.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As announced VIDIOC_G_CHIP_IDENT_OLD is now removed for 2.6.30.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
changeset 04934e44e3784a1b969582e2d59afcec278470c6 removed the last implementation
that were still using the V4L1 obsoleted header.
Now, video_decoder.h is not used anymore by any driver.
Let's remove it and all references for it in Kernel.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There was never any build-time dependency of the dib0700 usb module on the
dib0070 tuner module. Now that the build-time dependencies of dib0700 on
dib3000mc, dib7000p and dib7000m have been removed in the previous changesets,
we can enable DVB_FE_CUSTOMISE for these modules under config DVB_USB_DIB0700
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This function prototype is defined but the function itself does not exist.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
It's much nicer if the log message tells you which io ports are possible,
rather than having to run modinfo or look it up in the source or manual.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The tda827x driver supports a feature that the tda18271 driver was lacking
until now. This patch adds support for device-level configuration via the
tuner callback configuration interface.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The V4L1 obsoleted header video_decoder.h is not used anymore by any driver. Only
a name decoding function at v4l2-ioctl still implements it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The cx18 private packet insertion code only expects to operate on an MPEG PS
when inserting private packets of sliced VBI data. This patch keeps the cx18
driver from corrupting the MPEG TS or other non-PS stream types, in case the
user enables sliced VBI insertion for these MPEG stream types.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Based on a documentation clarification from Conexant, fix the register code
used for sliced VBI VPS service.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
My s-parse builds never griped about be32_to_cpu() casting to __be32, but Hans'
builds did. This change explictly declares the pointer into the VBI buffer
header as __be32, which is the correct thing to do as the data is always
big endian when we go to fetch it. Hopefully this will quiet s-parse warnings.
Also corrected a misplaced parenthesis logic error in checking for the VBI
header magic number.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Fix a scaling check that was failing, due to a magic number I missed fixing
during previous slice VBI changes. Now
$ v4l2-ctl -v width=480,height=480,pixelformat=MPEG
yields proper visual results again.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
It was a struct file *, but all that function wants is the struct zoran_fh
from the file's private data. Since every caller already has this, just
pass the zoran_fh instead.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Fix dvb frontend debug variable to be static, to avoid linker
errors:
drivers/built-in.o:(.data+0xf4b0): multiple definition of `debug'
arch/x86/kernel/built-in.o:(.kprobes.text+0x90): first defined here
ld: Warning: size of symbol `debug' changed from 85 in arch/x86/kernel/built-in.o to 4 in drivers/built-in.o
It would also be Good if arch/x86/kernel/entry_32.S didn't have a
non-static 'debug' symbol. OTOH, it helps catch things like this one.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of asking a lot of questions for the poor users, let's just hide
the frontend customise menu, if the user doesn't want to customise.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The name of the option is DVB_FE_CUSTOMISE. However, on a few places, a wrong
name were used, due to a typo (DVB_FE_CUSTOMIZE).
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Compro VideoMate uses an external audio DSP chip, controlled via tvaudio
module (tda9874a). This patch improves em28xx infrastructure to support
an external audio processor and fixes the Compro VideoMate entry to work
with it.
Signed-off-by: Vitaly Wool <vital@embeddedalley.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
dm1105 uses the ir_*() functions, so it needs to select VIDEO_IR
to avoid build errors:
dm1105.c:(.text+0x26b7ac): undefined reference to `ir_input_keydown'
dm1105.c:(.text+0x26b7bc): undefined reference to `ir_input_nokey'
(.devinit.text+0x29982): undefined reference to `ir_codes_dm1105_nec'
(.devinit.text+0x2998a): undefined reference to `ir_input_init'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add support for the alternate resolutions offered by SQ-905 based cameras. As
well as 320x240 all cameras can do 160x120 and some can do 640x480.
Signed-off-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Theodore Kilgore <kilgota@auburn.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
I have a GeoVision GV-800(S) card, it has 4 CONEXANT BT878A chips.
It has 16 video inputs and 4 audio inputs, and it is almost identical
to the GV-800, as seen on http://bttv-gallery.de .
The only difference appears to be the analog mux, it has a CD22M3494
in place of the MT8816AP. The card has a blue PCB, as seen in this
picture: http://www.gsbr.com.br/imagem/kits/GeoVision%20GV%20800.jpg .
This card wasn't originally supported, and it was detected as
UNKNOWN/GENERIC. The video inputs weren't working, so I tried
"forcing" a few cards like the GeoVision GV-600, but there was still
no video. So I made a patch to support this card, based on the Kodicom
4400r.
The GV-800(S) is identified as follows:
...
02:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
02:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
02:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
02:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
...
02:00.0 0400: 109e:036e (rev 11)
Subsystem: 800a:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at cdfff000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Kernel modules: bttv
02:00.1 0480: 109e:0878 (rev 11)
Subsystem: 800a:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at cdffe000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
02:04.0 0400: 109e:036e (rev 11)
Subsystem: 800b:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at cdffd000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Kernel modules: bttv
02:04.1 0480: 109e:0878 (rev 11)
Subsystem: 800b:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at cdffc000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
02:08.0 0400: 109e:036e (rev 11)
Subsystem: 800c:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at cdffb000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Kernel modules: bttv
02:08.1 0480: 109e:0878 (rev 11)
Subsystem: 800c:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at cdffa000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
02:0c.0 0400: 109e:036e (rev 11)
Subsystem: 800d:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at cdff9000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Kernel modules: bttv
02:0c.1 0480: 109e:0878 (rev 11)
Subsystem: 800d:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at cdff8000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
As you can see, the GV-800(S) card is almost identical to the GV-800
on bttv-gallery, so this patch might also work for that card. If not,
only a few changes should be required on the gv800s_write() function.
After this patch, the video inputs work correctly on linux 2.6.24 and
2.6.27 using the software 'motion'. The input order may seem a little
odd, but it's the order the original software/driver uses, and I decided
to keep that order to get the most out of the card.
I tried to get the audio working with the snd-bt87x module, but I only
get noise from every audio input, even after selecting a different mux
with alsamixer. Also, after trying to play sound from those sources, I
randomly get a RISC error about an invalid RISC opcode, and then that
output stops working. I also can't change the sampling rate when
recording. Any pointers to adding audio support are welcome.
Signed-off-by: Bruno Christo <bchristo@inf.ufsm.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch introduces support for DVB-T for the following dibcom based card:
Sony PlayTV (USB-ID: 1415:0003)
Signed-off-by: Sebastián Blanes <sebastian.blanes@gmail.com>
Cc: Patrick Boettcher <patrick.boettcher@desy.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add DVB support for Avermedia DVB-S Pro and
Avermedia DVB-S Hybrid+FM card both labled A700.
They use zl10313 demod (driver mt312) and zl10036 tuner.
[mchehab@redhat.com: change __FUNCTION__ into __func__]
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This driver is based on initial work by Tino Reichardt and was heavily changed.
The datasheet of the zl10036 can be found here and on other places on the net:
http://www.mcmilk.de/projects/dvb-card/datasheets/ZL10036.pdf
The zl10038 is similar to the zl10036, so it is maybe possible to write a common
driver of necessary.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls. For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.
Zeroing code is removed from querycap, enum_input, enum_fmt_vid_cap, and
g_fmt_vid_cap.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls. For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.
Zeroing code is removed from g_audio, enum_input, g_parm and gmbuf.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls. For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.
Zeroing code is removed from g_audio, queryctrl, and enum_fmt_vid_cap.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls. For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.
Zeroing code is removed from enum_fmt_vid_cap, g_fmt_vid_cap, and g_parm.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls. For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.
Zeroing code is removed from enum_input and g_tuner.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls. For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.
Zeroing code is removed from enum_input and g_tuner.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
vidioc_enum_fmt_vid_overlay() did nothing but call
vidioc_enum_fmt_vid_cap(), so just make
saa7146_video_ioctl_ops.vidioc_enum_fmt_vid_overlay point to
vidioc_enum_fmt_vid_cap() and get ride of vidioc_enum_fmt_vid_overlay().
Have gparm use v4l2_video_std_frame_period to fill in the frame period
instead of just assuming PAL.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Some code was calling v4l2_video_std_construct() when all it cared about
was the frame period. So make a function that just returns that and have
v4l2_video_std_construct() use it.
At this point there are no users of v4l2_video_std_construct() left outside
of v4l2-ioctl, so it could be un-exported and made static.
Change v4l2_video_std_construct() so that it doesn't zero out the struct
v4l2_standard passed in. It's already been zeroed out in the common ioctl
code.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
If an ioctl is read-only then the driver fills in all the fields. Lots of
times drivers only care about some fields so it's best if video_ioctl2
takes care of zeroing out the entire structure before handing it to the
driver. This saves code in each driver to do it and driver authors often
forget.
The existing memset code in some of the read-only ioctl handlers
can be deleted.
Convert a case statement to a single if statement.
Deleted a debug line from ENUMAUDOUT that was copy-and-pasted to G_AUDOUT
by mistake.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There are many RW ioctls() in v4l2 where userspace only supplies one or two
of the first fields in the structure passed to the ioctl. The driver then
fills in the rest of the fields.
Instead of copying the entire structure from userspace to the kernel we
only need to copy those fields that userspace is actually supposed to
supply.
What's more, the fields that are meant to be only be output from the driver
can be zeroed out in the videodev code, in case the driver doesn't fill
them all in. Many of the ioctl handlers in v4l2_ioctl do this already, but
my patch does this at one common point and so all the memsets for each
ioctl can be deleted.
For VIDIOC_G_SLICED_VBI_CAP, which has one input field ('type') and other
output-only fields, the input field is near the end of the structure
instead of at the beginning. So there is still a memset in it's ioctl
handler to zero out the beginning of the struct.
There were a couple mistakes with the existing code:
For VIDIOC_G_AUDIO the index field was preserved, but G_AUDIO is a read
only ioctl so nothing is copied from userspace to preserve.
For VIDIOC_G_FREQUENCY the tuner field was not preserved like it should
have been. This would be a problem if there was any hardware with more
than one tuner/modulator.
For VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS, none of the
fields were preserved even though each ioctl has several field that are
supposed to be inputs to the driver! Obviously these ioctls don't get
used much. The index field is needed if the driver has multiple
discrete sizes/rates and other fields can be used too, e.g. if the size
depends on pixel format or frame rate depends on image size for
example.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
It was a typo in the function
name, it should be lnbh24_attach, and not lnbp24_attach.
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add support for NetUP Dual DVB-S2 CI card
The card based on cx23885 PCI-e bridge, CiMax SP2 Common Interface chips,
STM lnbh24 LNB power chip, stv6110 tuners and stv0900 demodulator.
http://www.linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add last piece of code to support ST STV0900 dual demodulator.
The IC consist of two dependent parts.
It may use single or dual mode.
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The IC consist of two dependent parts.
It may use single or dual mode.
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The controller consist of two independent parts.
Every part is similar to LNBP21, but has configurable i2c address.
It is used in NetUP Dual DVB-S2 CI card.
http://linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The tuner is used in NetUP Dual DVB-S2 CI card.
http://linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
[mchehab@redhat.com: removed a wrong header: "cx23885.h"]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add CIMax2 Common Interface code for NetUP Dual DVB-S2 CI card.
SmarDTV CIMax(R) SP2 is Dual CableCARD, DVB Common Interface
and OpenCable Hardware Controller.
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add init code for NetUP Dual DVB-S2 CI card
The card based on cx23885 PCI-e bridge, CiMax SP2 Common Interface chips,
STM lnbh24 LNB power chip, stv6110 tuners and stv0900 demodulator.
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
For VIDIOC_QUERYBUF only the first two fields, size and type, are used as
input. The rest can be filled in by the driver as output. Most drivers do
not actually use all the field and unused ones should be zeroed out. Some
drivers have code to do this and some drivers should but don't. So put
some zero out code in v4l2_ioctl so that all drivers using that system get
it.
The drivers that have zeroing code get that code removed.
Some drivers checked that the type field was valid, but v4l2_ioctl already
does this so those checks can be removed as well.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
A recent patch added a forward declaration of cx88_core right before the
main definition of that structure, which is obviously unneeded.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
video_register_device_index() checks if it was passed a NULL video_device
pointer (which isn't allowed) _after_ it has already dereferenced it with
video_get_drvdata(vdev). The checks are clearly pointless and can be
removed, as the function would have crashed before reaching them if vdev
ever was NULL.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
report TUNER_STATUS_LOCKED if rf_locked or ref_locked
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This function does not work properly and is not necessary - remove it for now.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Analog doesn't work in this driver yet. This code just adds extra bloat,
so remove it for now.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Fix the following build error:
drivers/media/dvb/siano/smsusb.o: In function `get_order':
include/asm-generic/page.h:10: multiple definition of `sms_dbg'
drivers/media/dvb/siano/sms1xxx.o:include/asm-generic/page.h:10: first defined here
drivers/media/dvb/siano/smsdvb.o: In function `get_order':
include/asm-generic/page.h:10: multiple definition of `sms_dbg'
drivers/media/dvb/siano/sms1xxx.o:include/asm-generic/page.h:10: first defined here
Thanks to Mauro Carvalho Chehab for his original patch to address this issue.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Remove variables that were holdovers from ivtv for supporting the CX23415
MPEG decoder output.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Give messages originating from internal subdevs a header using the subdev's
name. Fixed an uninitialized variable problem with reading the EEPROM, noticed
from log output. Got rid of the unused cx18_av_exit() function.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
We leaked buffers every time a device was removed, if the user had enabled
sliced VBI insertion into the MPEG stream. MythTV uses that.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Convert GPIO line functions, such a audio routing and device resets, to
v4l2_subdevices. This essentially completes the conversion of cx18 to the
v4l2_device/v4l2_subdevice framework. No regression testing has taken place as
of yet. Also an ivtv legacy bug with GPIO mux routing and going to/from radio
mode was commented, but not fixed.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This is a major perturbation to cx18 I2C device handling to convert it to the
v4l2_device/subdeivce framework. This change breaks GPIO audio multiplexer
control for the time being. It will be fixed in a coming change.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Added a new chip identifer to v4l2-chip-ident for the integrated A/V broadcast
decoder core internal to the CX23418. Completed separation and encapsulation
of the A/V decoder core interface as a v4l2_subdevice. The cx18 driver now
compiles and links again.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Convert card instance handling to a lighter weight mechanism like ivtv.
Also convert name strings and debug messages to use v4l2_device.name.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This is the next step in converting the cx18 driver to use the v4l2_device/
v4l2_subdevice framework. This is a straightforward conversion of the
cx18_av_*[ch] files. It compiles, but leaves the driver in an unlinkable
state at the moment.
Note, the cx18 integrated A/V digitizer will now make a host match at address 1,
as far as v4l2-dbg is concerned. That means it identifies itself as a separate
"chip", and acts as an alias to the integrated A/V decoder registers that are
also available with the host match at address 0.
Signed-off-by: Andy Walls <awalls@radix.net>
[mchehab@redhat.com: fix merge conflicts due to the removal of v4l2_ctrl_query_fill_std()]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As pointed out by Mauro Chehab, we should always use EXPORT_SYMBOL_GPL
instead of EXPORT_SYMBOL wherever possible.
A message was posted to the linux-media mailing list about this, checking
with Uri Shkolnik of Siano Mobile Silicon if this is okay to convert.
As per Uri's response to this email, it is OK for us to make this conversion.
http://www.spinics.net/lists/linux-media/msg02200.html
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The smsdvb module was separated from the core and usb code. This change loads
smsdvb automatically for driver configurations that depend on it.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Fix checkpatch.pl violations introduced by previous changeset:
ERROR: do not use C99 // comments
156: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1373:
+//#ifdef DVB_CORE
ERROR: do not use C99 // comments
157: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1374:
+// smsdvb_unregister();
ERROR: do not use C99 // comments
158: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1375:
+//#endif
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
163: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1380:
+EXPORT_SYMBOL(smscore_onresponse);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
164: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1381:
+EXPORT_SYMBOL(sms_get_board);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
165: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1382:
+EXPORT_SYMBOL(sms_debug);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
166: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1383:
+EXPORT_SYMBOL(smscore_putbuffer);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
167: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1384:
+EXPORT_SYMBOL(smscore_registry_getmode);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
168: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1385:
+EXPORT_SYMBOL(smscore_register_device);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
169: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1386:
+EXPORT_SYMBOL(smscore_set_board_id);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
170: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1387:
+EXPORT_SYMBOL(smscore_start_device);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
171: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1388:
+EXPORT_SYMBOL(smsusb_id_table);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
172: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1389:
+EXPORT_SYMBOL(smscore_unregister_device);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
173: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1390:
+EXPORT_SYMBOL(smscore_getbuffer);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
174: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1391:
+EXPORT_SYMBOL(smscore_get_device_mode);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
175: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1392:
+EXPORT_SYMBOL(smscore_register_client);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
176: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1393:
+EXPORT_SYMBOL(smscore_unregister_hotplug);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
177: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1394:
+EXPORT_SYMBOL(smsclient_sendrequest);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
178: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1395:
+EXPORT_SYMBOL(smscore_unregister_client);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
179: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1396:
+EXPORT_SYMBOL(smscore_get_board_id);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
180: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1397:
+EXPORT_SYMBOL(smscore_register_hotplug);
WARNING: line over 80 characters
391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398:
+extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename);
ERROR: "foo* bar" should be "foo *bar"
391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398:
+extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename);
WARNING: line over 80 characters
392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399:
+extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size);
ERROR: "foo* bar" should be "foo *bar"
392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399:
+extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size);
ERROR: space required after that ',' (ctx:VxV)
392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399:
+extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size);
^
WARNING: __func__ should be used instead of gcc specific __FUNCTION__
489: FILE: linux/drivers/media/dvb/siano/smsusb.c:443:
+ printk(KERN_INFO"%s Entering status %d.\n", __FUNCTION__, msg.event);
WARNING: __func__ should be used instead of gcc specific __FUNCTION__
501: FILE: linux/drivers/media/dvb/siano/smsusb.c:455:
+ printk(KERN_INFO "%s Entering.\n", __FUNCTION__);
ERROR: space prohibited before that '++' (ctx:WxB)
505: FILE: linux/drivers/media/dvb/siano/smsusb.c:459:
+ for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i ++)
^
WARNING: __func__ should be used instead of gcc specific __FUNCTION__
517: FILE: linux/drivers/media/dvb/siano/smsusb.c:471:
+ __FUNCTION__, rc);
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
[mchehab@redhat.com: sms_dbg were declared on 3 different files]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Import the following changes from Uri Shkolnik
* Two-ways merge with Siano internal repository
* Continuing with DVB sub-system separation
* kconfig and makefile updates
* Code cleanup
This is a work-in-progress sync with Siano's internal repository.
Some changes had to be altered or dropped in order not to break the build.
This breaks normal operation for the current driver, but it is being committed
now for tracking purposes.
These changes introduce the following checkpatch.pl violations:
ERROR: do not use C99 // comments
156: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1373:
+//#ifdef DVB_CORE
ERROR: do not use C99 // comments
157: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1374:
+// smsdvb_unregister();
ERROR: do not use C99 // comments
158: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1375:
+//#endif
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
163: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1380:
+EXPORT_SYMBOL(smscore_onresponse);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
164: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1381:
+EXPORT_SYMBOL(sms_get_board);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
165: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1382:
+EXPORT_SYMBOL(sms_debug);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
166: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1383:
+EXPORT_SYMBOL(smscore_putbuffer);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
167: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1384:
+EXPORT_SYMBOL(smscore_registry_getmode);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
168: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1385:
+EXPORT_SYMBOL(smscore_register_device);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
169: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1386:
+EXPORT_SYMBOL(smscore_set_board_id);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
170: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1387:
+EXPORT_SYMBOL(smscore_start_device);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
171: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1388:
+EXPORT_SYMBOL(smsusb_id_table);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
172: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1389:
+EXPORT_SYMBOL(smscore_unregister_device);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
173: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1390:
+EXPORT_SYMBOL(smscore_getbuffer);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
174: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1391:
+EXPORT_SYMBOL(smscore_get_device_mode);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
175: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1392:
+EXPORT_SYMBOL(smscore_register_client);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
176: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1393:
+EXPORT_SYMBOL(smscore_unregister_hotplug);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
177: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1394:
+EXPORT_SYMBOL(smsclient_sendrequest);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
178: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1395:
+EXPORT_SYMBOL(smscore_unregister_client);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
179: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1396:
+EXPORT_SYMBOL(smscore_get_board_id);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
180: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1397:
+EXPORT_SYMBOL(smscore_register_hotplug);
WARNING: line over 80 characters
391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398:
+extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename);
ERROR: "foo* bar" should be "foo *bar"
391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398:
+extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename);
WARNING: line over 80 characters
392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399:
+extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size);
ERROR: "foo* bar" should be "foo *bar"
392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399:
+extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size);
ERROR: space required after that ',' (ctx:VxV)
392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399:
+extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size);
^
WARNING: __func__ should be used instead of gcc specific __FUNCTION__
489: FILE: linux/drivers/media/dvb/siano/smsusb.c:443:
+ printk(KERN_INFO"%s Entering status %d.\n", __FUNCTION__, msg.event);
WARNING: __func__ should be used instead of gcc specific __FUNCTION__
501: FILE: linux/drivers/media/dvb/siano/smsusb.c:455:
+ printk(KERN_INFO "%s Entering.\n", __FUNCTION__);
ERROR: space prohibited before that '++' (ctx:WxB)
505: FILE: linux/drivers/media/dvb/siano/smsusb.c:459:
+ for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i ++)
^
WARNING: __func__ should be used instead of gcc specific __FUNCTION__
517: FILE: linux/drivers/media/dvb/siano/smsusb.c:471:
+ __FUNCTION__, rc);
total: 7 errors, 23 warnings, 524 lines checked
Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Move the usb_device_id table to the smsusb module in preparation for the
sms1xxx module to be split into sub-modules. This will allow the smsusb
driver to start up automatically upon insertion of the USB device.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The sms1xxx driver will be broken down into smaller modules,
so the original name, smsusb, is more appropriate.
Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Nobody uses struct smsdvb_client_t other than smsdvb.c --
this does not need to be inside smscoreapi.h
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The driver infrared remote code part is altered to switch to a work queue.
Also ir_codes table moved to ir-common module for shared access.
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The driver already has DMA buffer organized like ringbuffer,
so it is easy to switch to a work queue.
Length of ringbuffer can easily be increased, if someone need it.
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Added usb vendor/product id for Kaiser Baas Video to DVD maker.
Thanks to Trevor Campbell <tca42186@bigpond.net.au> for providing all data and tests needed to add this card to em28xx driver.
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Added SIIG AVTuner-PVR to the right entry.
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Removed EM2821_BOARD_PROLINK_PLAYTV_USB2 entry.
This entry has a incorrect tuner set.
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Now, just a few modules are still dependent of this legacy header:
$ grep -l DECODER_ `find linux/drivers/media/ -name '*.[ch]' -exec grep -l video_decoder '{}' \;`
linux/drivers/media/video/v4l2-ioctl.c
linux/drivers/media/video/indycam.c
linux/drivers/media/video/saa7191.c
linux/drivers/media/video/vino.c
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Zoran doesn't do autoprobing anymore, so remove support for this from the
i2c modules.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Thanks to Jean Delvare for pointing this out.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
By popular request increased the default number and size of the buffers
to something that tvtime likes.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The zoran i2c modules were still using V4L1 internally. Replace this
with V4L2. Also deleted saa7111.c and saa7114.c, we use saa7115.c instead.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[mchehab@redhat.com: fix v4l2_ctrl_query_fill_std merge conflict]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
count == 0 has a special meaning, implement this.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Actually try to turn the format into something usable rather than just
rejecting it if it isn't perfect.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Remove bogus check on bytesperline in the try_fmt_vid_out call.
Just set it to 0.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski
