remove the definitions of macros:
XATTR_TRUSTED_PREFIX
XATTR_USER_PREFIX
since they are defined in linux/xattr.h
Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch removes the !NO_TRUNCATE code that anyway required a manual
editing of the code for being used.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fs/exec.c used to need mman.h pagemap.h swap.h and rmap.h when it did
mm-ish stuff in install_arg_page(); but no need for them after 2.6.22.
[akpm@linux-foundation.org: unbreak arm]
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace the private BE16/BE32/BE64 macros with direct calls to
get_unaligned_be16/32/64.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some IBM POWER-based platforms have the ability to run in a
mode which mostly appears to the OS as a different processor from the
actual hardware. For example, a Power6 system may appear to be a
Power5+, which makes the AT_PLATFORM value "power5+". This means that
programs are restricted to the ISA supported by Power5+;
Power6-specific instructions are treated as illegal.
However, some applications (virtual machines, optimized libraries) can
benefit from knowledge of the underlying CPU model. A new aux vector
entry, AT_BASE_PLATFORM, will denote the actual hardware. For
example, on a Power6 system in Power5+ compatibility mode, AT_PLATFORM
will be "power5+" and AT_BASE_PLATFORM will be "power6". The idea is
that AT_PLATFORM indicates the instruction set supported, while
AT_BASE_PLATFORM indicates the underlying microarchitecture.
If the architecture has defined ELF_BASE_PLATFORM, copy that value to
the user stack in the same manner as ELF_PLATFORM.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This fixes the following compile error caused by commit
f9247273cb ("UFS: add const to parser
token table"):
CC fs/nfs/nfsroot.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/nfs/nfsroot.c:130: error: tokens causes a section type conflict
make[3]: *** [fs/nfs/nfsroot.o] Error 1
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(expecting a SPNEGO pseudo-mechanism oid), the test to verify it is a
primitive encoding is compared against the asn1 class. Primitive is not a
class. This brings check in line with similar check for krb/ntlmssp oid.
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
This patch adds a "const" to the parser token table. I've done an
allmodconfig build to see if this produces any warnings/failures and the
patch includes a fix for the only warning that was produced.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Alexander Viro <aviro@redhat.com>
Acked-by: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ioctls AUTOFS_IOC_TOGGLEREGHOST and AUTOFS_IOC_ASKREGHOST were added
several years ago but what they were intended for has never been
implemented (as far as I'm aware noone uses them) so remove them.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch re-orgnirzes the checking for and waiting on active expires and
elininates redundant checks.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Appologies, somehow I seem to have sent an out dated version of this
patch. Here is an additional patch that brings the patch up to date.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For direct and offset type mounts that are covered by another mount we
cannot check the AUTOFS_INF_EXPIRING flag during a path walk which leads
to lookups walking into an expiring mount while it is being expired.
For example, for the direct multi-mount map entry with a couple of
offsets:
/race/mm1 / <server1>:/<path1>
/om1 <server2>:/<path2>
/om2 <server1>:/<path3>
an autofs trigger mount is mounted on /race/mm1 and when accessed it is
over mounted and trigger mounts made for /race/mm1/om1 and /race/mm1/om2.
So it isn't possible for path walks to see the expiring flag at all and
they happily walk into the file system while it is expiring.
When expiring these mounts follow_down() must stop at the autofs mount and
all processes must block in the ->follow_link() method (except the daemon)
until the expire is complete. This is done by decrementing the d_mounted
field of the autofs trigger mount root dentry until the expire is
completed. In ->follow_link() all processes wait on the expire and the
mount following is completed for the daemon until the expire is complete.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The selection of a dentry for expiration and the setting of the
AUTOFS_INF_EXPIRING flag isn't done atomically which can lead to lookups
walking into an expiring mount.
What happens is that an expire is initiated by the daemon and a dentry is
selected for expire but, since there is no lock held between the selection
and setting of the expiring flag, a process may find the flag clear and
continue walking into the mount tree at the same time the daemon attempts
the expire it.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are two cases for which a dentry that has a pending mount request
does not wait for completion. One is via autofs4_revalidate() and the
other via autofs4_follow_link().
In revalidate, after the mount point directory is created, but before the
mount is done, the check in try_to_fill_dentry() can can fail to send the
dentry to the wait queue since the dentry is positive and the lookup flags
may contain only LOOKUP_FOLLOW. Although we don't trigger a mount for the
LOOKUP_FOLLOW flag, if ther's one pending we might as well wait and use
the mounted dentry for the lookup.
In autofs4_follow_link() the dentry is not checked to see if it is pending
so it may fail to call try_to_fill_dentry() and not wait for mount
completion.
A dentry that is pending must always be sent to the wait queue.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The mount triggering functionality of readdir and related functions is no
longer used (and is quite broken as well). The unused portions have been
removed.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have been seeing mount requests comming to the automount daemon for
keys of the form "<map key>/<non key directory>" which are lookups for
invalid map keys. But we can check for this in the kernel module and
return a fail immediately, without having to send a request to the daemon.
It is possible to recognise these requests are invalid based on whether
the request dentry is negative and its relation to the autofs file system
root.
For example, given the indirect multi-mount map entry:
idm1 \
/mm1 <server>:/<path1>
/mm2 <server>:/<path2>
For a request to mount idm1, IS_ROOT((idm1)->d_parent) will be always be
true and the dentry may be negative. But directories idm1/mm1 and
idm1/mm2 will always be created as part of the mount request for idm1. So
any mount request within idm1 itself must have a positive dentry otherwise
the map key is invalid.
In version 4 these multi-mount entries are all mounted and umounted as a
single request and in version 5 the directories idm1/mm1 and idm1/mm2 are
created and an autofs fs mounted on them to act as a mount trigger so the
above is also true.
This also holds true for the autofs version 4 pseudo direct mount feature.
When this feature is used without the "--ghost" option automount(8) will
create internal submounts as we go down the map key paths which are
essentially normal indirect mounts for which the above holds. If the
"--ghost" option is given the directories for map keys are created at
daemon startup so valid map entries correspond to postive dentries in the
autofs fs.
autofs version 5 direct mount maps are similar except that the IS_ROOT
check is not needed. This has been addressed in a previous patch tittled
"autofs4 - detect invalid direct mount requests".
For example, given the direct multi-mount map entry:
/test/dm1 \
/mm1 <server>:/<path1>
/mm2 <server>:/<path2>
An autofs fs is mounted on /test/dm1 as a trigger mount and when a mount
is triggered for /test/dm1, the multi-mount offset directories
/test/dm1/mm1 and /test/dm1/mm2 are created and an autofs fs is mounted on
them to act as mount triggers. So valid direct mount requests must always
have a positive dentry if they correspond to a valid map entry.
Signed-off-by: Ian Kent <raven@themaw.net>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
autofs v5 direct and offset mounts within an autofs filesystem are
triggered by existing autofs triger mounts so the mount point dentry must
be positive. If the mount point dentry is negative then the trigger
doesn't exist so we can return fail immediately.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If an autofs mount becomes catatonic before autofs4_wait_release() is
called the wait queue counter will not be decremented down to zero and the
entry will never be freed. There are also races decrementing the wait
counter in the wait release function. To deal with this the counter needs
to be updated while holding the wait queue mutex and waiters need to be
woken up unconditionally when the wait is removed from the queue to ensure
we eventually free the wait.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is possible for an autofs mount to become catatonic (and for the daemon
communication pipe to become NULL) after a wait has been initiallized but
before the request has been sent to the daemon. We need to check for this
before sending the request packet.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It see that the patch tittled "autofs4 - fix pending mount race" is
missing a change that I had recently made.
It's missing a kfree for the case mutex_lock_interruptible() fails
to aquire the wait queue mutex.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Close a race between a pending mount that is about to finish and a new
lookup for the same directory.
Process P1 triggers a mount of directory foo. It sets
DCACHE_AUTOFS_PENDING in the ->lookup routine, creates a waitq entry for
'foo', and calls out to the daemon to perform the mount. The autofs
daemon will then create the directory 'foo', using a new dentry that will
be hashed in the dcache.
Before the mount completes, another process, P2, tries to walk into the
'foo' directory. The vfs path walking code finds an entry for 'foo' and
calls the revalidate method. Revalidate finds that the entry is not
PENDING (because PENDING was never set on the dentry created by the
mkdir), but it does find the directory is empty. Revalidate calls
try_to_fill_dentry, which sets the PENDING flag and then calls into the
autofs4 wait code to trigger or wait for a mount of 'foo'. The wait code
finds the entry for 'foo' and goes to sleep waiting for the completion of
the mount.
Yet another process, P3, tries to walk into the 'foo' directory. This
process again finds a dentry in the dcache for 'foo', and calls into the
autofs revalidate code.
The revalidate code finds that the PENDING flag is set, and so calls
try_to_fill_dentry.
a) try_to_fill_dentry sets the PENDING flag redundantly for this
dentry, then calls into the autofs4 wait code.
b) the autofs4 wait code takes the waitq mutex and searches for an
entry for 'foo'
Between a and b, P1 is woken up because the mount completed. P1 takes the
wait queue mutex, clears the PENDING flag from the dentry, and removes the
waitqueue entry for 'foo' from the list.
When it releases the waitq mutex, P3 (eventually) acquires it. At this
time, it looks for an existing waitq for 'foo', finds none, and so creates
a new one and calls out to the daemon to mount the 'foo' directory.
Now, the reason that three processes are required to trigger this race is
that, because the PENDING flag is not set on the dentry created by mkdir,
the window for the race would be way to slim for it to ever occur.
Basically, between the testing of d_mountpoint(dentry) and the taking of
the waitq mutex, the mount would have to complete and the daemon would
have to be woken up, and that in turn would have to wake up P1. This is
simply impossible. Add the third process, though, and it becomes slightly
more likely.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The autofs4_catatonic_mode() function accesses the wait queue without any
locking but can be called at any time. This could lead to a possible
double free of the name field of the wait and a double fput of the daemon
communication pipe or an fput of a NULL file pointer.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The autofs_wait_queue already contains all of the fields of the
struct qstr, so change it into a qstr.
This patch, from Jeff Moyer, has been modified a liitle by myself.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When an open(2) call is made on an autofs mount point directory that
already exists and the O_DIRECTORY flag is not used the needed mount
callback to the daemon is not done. This leads to the path walk
continuing resulting in a callback to the daemon with an incorrect
key. open(2) is called without O_DIRECTORY by the "find" utility but
this should be handled properly anyway.
This happens because autofs needs to use the lookup flags to decide
when to callback to the daemon to perform a mount to prevent mount
storms. For example, an autofs indirect mount map that has the "browse"
option will have the mount point directories are pre-created and the
stat(2) call made by a color ls against each directory will cause all
these directories to be mounted. It is unfortunate we need to resort
to this but mount maps can be quite large. Additionally, if a user
manually umounts an autofs indirect mount the directory isn't removed
which also leads to this situation.
To resolve this autofs needs to use the lookup intent flags to enable
it to make this decision. This patch adds this check and triggers a
call back if any of the lookup intent flags are set as all these calls
warrant a mount attempt be requested.
I know that external VFS code which uses the lookup flags is something
that the VFS would like to eliminate but I have no choice as I can't
see any other way to do this. A VFS dentry or inode operation callback
which returns the lookup "type" (requires a definition) would be
sufficient. But this change is needed now and I'm not aware of the form
that coming VFS changes will take so I'm not willing to propose anything
along these lines.
If anyone can provide an alternate method I would be happy to use it.
[akpm@linux-foundation.org: fix build for concurrent VFS changes]
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since we now delay hashing of dentrys until the ->mkdir() call, droping
and re-taking the directory mutex within the ->lookup() function when we
are being called by user space is not needed. This can lead to a race
when other processes are attempting to access the same directory during
mount point directory creation.
In this case we need to hang onto the mutex to ensure we don't get user
processes trying to create a mount request for a newly created dentry
after the mount point entry has already been created. This ensures that
when we need to check a dentry passed to autofs4_wait(), if it is hashed,
it is always the mount point dentry and not a new dentry created by
another lookup during directory creation.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The length of the symlink name has been moved but it needs to be set
before allocating space for it in the dentry info struct. This corrects a
mistake in a recent patch.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A while ago a patch to resolve a deadlock during directory creation was
merged. This delayed the hashing of lookup dentrys until the ->mkdir()
(or ->symlink()) operation completed to ensure we always went through
->lookup() instead of also having processes go through ->revalidate() so
our VFS locking remained consistent.
Now we are seeing a couple of side affects of that change in situations
with heavy mount activity.
Two cases have been identified:
1) When a mount request is triggered, due to the delayed hashing, the
directory created by user space for the mount point doesn't have the
DCACHE_AUTOFS_PENDING flag set. In the case of an autofs multi-mount
where a tree of mount point directories are created this can lead to
the path walk continuing rather than the dentry being sent to the wait
queue to wait for request completion. This is because, if the pending
flag isn't set, the criteria for deciding this is a mount in progress
fails to hold, namely that the dentry is not a mount point and has no
subdirectories.
2) A mount request dentry is initially created negative and unhashed.
It remains this way until the ->mkdir() callback completes. Since it
is unhashed a fresh dentry is used when the user space mount request
creates the mount point directory. This leaves the original dentry
negative and unhashed. But revalidate has no way to tell the VFS that
the dentry has changed, other than to force another ->lookup() by
returning false, which is at best wastefull and at worst not possible.
This results in an -ENOENT return from the original path walk when in
fact the mount succeeded.
To resolve this we need to ensure that the same dentry is used in all
calls to ->lookup() during the course of a mount request. This patch
achieves that by adding the initial dentry to a look aside list and
removes it at ->mkdir() or ->symlink() completion (or when the dentry is
released), since these are the only create operations autofs4 supports.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch series enables the use of a single dentry for lookups prior to
the dentry being hashed and so we no longer need to redo the lookup. This
patch reverts the patch of commit
033790449b.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Correct the error of making a positive dentry negative after it has been
instantiated.
The code that makes this error attempts to re-use the dentry from a
concurrent expire and mount to resolve a race and the dentry used for the
lookup must be negative for mounts to trigger in the required cases. The
fact is that the dentry doesn't need to be re-used because all that is
needed is to preserve the flag that indicates an expire is still
incomplete at the time of the mount request.
This change uses the the dentry to check the flag and wait for the expire
to complete then discards it instead of attempting to re-use it.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no good reason to immediately open the lower file, and that can
cause problems with files that the user does not intend to immediately
open, such as device nodes.
This patch removes the persistent file open from the interpose step and
pushes that to the locations where eCryptfs really does need the lower
persistent file, such as just before reading or writing the metadata
stored in the lower file header.
Two functions are jumping to out_dput when they should just be jumping to
out on error paths. This patch also fixes these.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When creating device nodes, eCryptfs needs to delay actually opening the lower
persistent file until an application tries to open. Device handles may not be
backed by anything when they first come into existence.
[Valdis.Kletnieks@vt.edu: build fix]
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: <Valdis.Kletnieks@vt.edu}
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes the following sparse warnings:
fs/ecryptfs/crypto.c:1036:8: warning: cast to restricted __be32
fs/ecryptfs/crypto.c:1038:8: warning: cast to restricted __be32
fs/ecryptfs/crypto.c:1077:10: warning: cast to restricted __be32
fs/ecryptfs/crypto.c:1103:6: warning: incorrect type in assignment (different base types)
fs/ecryptfs/crypto.c:1105:6: warning: incorrect type in assignment (different base types)
fs/ecryptfs/crypto.c:1124:8: warning: incorrect type in assignment (different base types)
fs/ecryptfs/crypto.c:1241:21: warning: incorrect type in assignment (different base types)
fs/ecryptfs/crypto.c:1244:30: warning: incorrect type in assignment (different base types)
fs/ecryptfs/crypto.c:1414:23: warning: cast to restricted __be32
fs/ecryptfs/crypto.c:1417:32: warning: cast to restricted __be16
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clean up overcomplicated string copy, which also gets rid of this
bogus warning:
fs/ecryptfs/main.c: In function 'ecryptfs_parse_options':
include/asm/arch/string_32.h:75: warning: array subscript is above array bounds
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mounting with invalid key signatures should probably fail, if they were
specifically requested but not available.
Also fix case checks in process_request_key_err() for the right sign of
the errnos, as spotted by Jan Tluka.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Tluka <jtluka@redhat.com>
Acked-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The userspace eCryptfs daemon sends HELO and QUIT messages to the kernel
for per-user daemon (un)registration. These messages are required when
netlink is used as the transport, but (un)registration is handled by
opening and closing the device file when miscdev is the transport. These
messages should be discarded in the miscdev transport so that a daemon
isn't registered twice.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
eCryptfs would really like to have read-write access to all files in the
lower filesystem. Right now, the persistent lower file may be opened
read-only if the attempt to open it read-write fails. One way to keep
from having to do that is to have a privileged kthread that can open the
lower persistent file on behalf of the user opening the eCryptfs file;
this patch implements this functionality.
This patch will properly allow a less-privileged user to open the eCryptfs
file, followed by a more-privileged user opening the eCryptfs file, with
the first user only being able to read and the second user being able to
both read and write. eCryptfs currently does this wrong; it will wind up
calling vfs_write() on a file that was opened read-only. This is fixed in
this patch.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds test that ensure the boundary conditions for the various
constants introduced in the previous patches is met. No code is generated.
[akpm@linux-foundation.org: fix alpha]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds O_NONBLOCK support to pipe2. It is minimally more involved
than the patches for eventfd et.al but still trivial. The interfaces of the
create_write_pipe and create_read_pipe helper functions were changed and the
one other caller as well.
The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>
#ifndef __NR_pipe2
# ifdef __x86_64__
# define __NR_pipe2 293
# elif defined __i386__
# define __NR_pipe2 331
# else
# error "need __NR_pipe2"
# endif
#endif
int
main (void)
{
int fds[2];
if (syscall (__NR_pipe2, fds, 0) == -1)
{
puts ("pipe2(0) failed");
return 1;
}
for (int i = 0; i < 2; ++i)
{
int fl = fcntl (fds[i], F_GETFL);
if (fl == -1)
{
puts ("fcntl failed");
return 1;
}
if (fl & O_NONBLOCK)
{
printf ("pipe2(0) set non-blocking mode for fds[%d]\n", i);
return 1;
}
close (fds[i]);
}
if (syscall (__NR_pipe2, fds, O_NONBLOCK) == -1)
{
puts ("pipe2(O_NONBLOCK) failed");
return 1;
}
for (int i = 0; i < 2; ++i)
{
int fl = fcntl (fds[i], F_GETFL);
if (fl == -1)
{
puts ("fcntl failed");
return 1;
}
if ((fl & O_NONBLOCK) == 0)
{
printf ("pipe2(O_NONBLOCK) does not set non-blocking mode for fds[%d]\n", i);
return 1;
}
close (fds[i]);
}
puts ("OK");
return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Building on the previous change to anon_inode_getfd, this patch introduces
support for handling of O_NONBLOCK in addition to the already supported
O_CLOEXEC. Following patches will take advantage of this support. As can be
seen, the additional support for supporting this functionality is minimal.
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch introduces the new syscall inotify_init1 (note: the 1 stands for
the one parameter the syscall takes, as opposed to no parameter before). The
values accepted for this parameter are function-specific and defined in the
inotify.h header. Here the values must match the O_* flags, though. In this
patch CLOEXEC support is introduced.
The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>
#ifndef __NR_inotify_init1
# ifdef __x86_64__
# define __NR_inotify_init1 294
# elif defined __i386__
# define __NR_inotify_init1 332
# else
# error "need __NR_inotify_init1"
# endif
#endif
#define IN_CLOEXEC O_CLOEXEC
int
main (void)
{
int fd;
fd = syscall (__NR_inotify_init1, 0);
if (fd == -1)
{
puts ("inotify_init1(0) failed");
return 1;
}
int coe = fcntl (fd, F_GETFD);
if (coe == -1)
{
puts ("fcntl failed");
return 1;
}
if (coe & FD_CLOEXEC)
{
puts ("inotify_init1(0) set close-on-exit");
return 1;
}
close (fd);
fd = syscall (__NR_inotify_init1, IN_CLOEXEC);
if (fd == -1)
{
puts ("inotify_init1(IN_CLOEXEC) failed");
return 1;
}
coe = fcntl (fd, F_GETFD);
if (coe == -1)
{
puts ("fcntl failed");
return 1;
}
if ((coe & FD_CLOEXEC) == 0)
{
puts ("inotify_init1(O_CLOEXEC) does not set close-on-exit");
return 1;
}
close (fd);
puts ("OK");
return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch introduces the new syscall pipe2 which is like pipe but it also
takes an additional parameter which takes a flag value. This patch implements
the handling of O_CLOEXEC for the flag. I did not add support for the new
syscall for the architectures which have a special sys_pipe implementation. I
think the maintainers of those archs have the chance to go with the unified
implementation but that's up to them.
The implementation introduces do_pipe_flags. I did that instead of changing
all callers of do_pipe because some of the callers are written in assembler.
I would probably screw up changing the assembly code. To avoid breaking code
do_pipe is now a small wrapper around do_pipe_flags. Once all callers are
changed over to do_pipe_flags the old do_pipe function can be removed.
The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>
#ifndef __NR_pipe2
# ifdef __x86_64__
# define __NR_pipe2 293
# elif defined __i386__
# define __NR_pipe2 331
# else
# error "need __NR_pipe2"
# endif
#endif
int
main (void)
{
int fd[2];
if (syscall (__NR_pipe2, fd, 0) != 0)
{
puts ("pipe2(0) failed");
return 1;
}
for (int i = 0; i < 2; ++i)
{
int coe = fcntl (fd[i], F_GETFD);
if (coe == -1)
{
puts ("fcntl failed");
return 1;
}
if (coe & FD_CLOEXEC)
{
printf ("pipe2(0) set close-on-exit for fd[%d]\n", i);
return 1;
}
}
close (fd[0]);
close (fd[1]);
if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0)
{
puts ("pipe2(O_CLOEXEC) failed");
return 1;
}
for (int i = 0; i < 2; ++i)
{
int coe = fcntl (fd[i], F_GETFD);
if (coe == -1)
{
puts ("fcntl failed");
return 1;
}
if ((coe & FD_CLOEXEC) == 0)
{
printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i);
return 1;
}
}
close (fd[0]);
close (fd[1]);
puts ("OK");
return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds the new dup3 syscall. It extends the old dup2 syscall by one
parameter which is meant to hold a flag value. Support for the O_CLOEXEC flag
is added in this patch.
The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <time.h>
#include <unistd.h>
#include <sys/syscall.h>
#ifndef __NR_dup3
# ifdef __x86_64__
# define __NR_dup3 292
# elif defined __i386__
# define __NR_dup3 330
# else
# error "need __NR_dup3"
# endif
#endif
int
main (void)
{
int fd = syscall (__NR_dup3, 1, 4, 0);
if (fd == -1)
{
puts ("dup3(0) failed");
return 1;
}
int coe = fcntl (fd, F_GETFD);
if (coe == -1)
{
puts ("fcntl failed");
return 1;
}
if (coe & FD_CLOEXEC)
{
puts ("dup3(0) set close-on-exec flag");
return 1;
}
close (fd);
fd = syscall (__NR_dup3, 1, 4, O_CLOEXEC);
if (fd == -1)
{
puts ("dup3(O_CLOEXEC) failed");
return 1;
}
coe = fcntl (fd, F_GETFD);
if (coe == -1)
{
puts ("fcntl failed");
return 1;
}
if ((coe & FD_CLOEXEC) == 0)
{
puts ("dup3(O_CLOEXEC) set close-on-exec flag");
return 1;
}
close (fd);
puts ("OK");
return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds the new epoll_create2 syscall. It extends the old epoll_create
syscall by one parameter which is meant to hold a flag value. In this
patch the only flag support is EPOLL_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.
A new name EPOLL_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.
The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <time.h>
#include <unistd.h>
#include <sys/syscall.h>
#ifndef __NR_epoll_create2
# ifdef __x86_64__
# define __NR_epoll_create2 291
# elif defined __i386__
# define __NR_epoll_create2 329
# else
# error "need __NR_epoll_create2"
# endif
#endif
#define EPOLL_CLOEXEC O_CLOEXEC
int
main (void)
{
int fd = syscall (__NR_epoll_create2, 1, 0);
if (fd == -1)
{
puts ("epoll_create2(0) failed");
return 1;
}
int coe = fcntl (fd, F_GETFD);
if (coe == -1)
{
puts ("fcntl failed");
return 1;
}
if (coe & FD_CLOEXEC)
{
puts ("epoll_create2(0) set close-on-exec flag");
return 1;
}
close (fd);
fd = syscall (__NR_epoll_create2, 1, EPOLL_CLOEXEC);
if (fd == -1)
{
puts ("epoll_create2(EPOLL_CLOEXEC) failed");
return 1;
}
coe = fcntl (fd, F_GETFD);
if (coe == -1)
{
puts ("fcntl failed");
return 1;
}
if ((coe & FD_CLOEXEC) == 0)
{
puts ("epoll_create2(EPOLL_CLOEXEC) set close-on-exec flag");
return 1;
}
close (fd);
puts ("OK");
return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The timerfd_create syscall already has a flags parameter. It just is
unused so far. This patch changes this by introducing the TFD_CLOEXEC
flag to set the close-on-exec flag for the returned file descriptor.
A new name TFD_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.
The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <time.h>
#include <unistd.h>
#include <sys/syscall.h>
#ifndef __NR_timerfd_create
# ifdef __x86_64__
# define __NR_timerfd_create 283
# elif defined __i386__
# define __NR_timerfd_create 322
# else
# error "need __NR_timerfd_create"
# endif
#endif
#define TFD_CLOEXEC O_CLOEXEC
int
main (void)
{
int fd = syscall (__NR_timerfd_create, CLOCK_REALTIME, 0);
if (fd == -1)
{
puts ("timerfd_create(0) failed");
return 1;
}
int coe = fcntl (fd, F_GETFD);
if (coe == -1)
{
puts ("fcntl failed");
return 1;
}
if (coe & FD_CLOEXEC)
{
puts ("timerfd_create(0) set close-on-exec flag");
return 1;
}
close (fd);
fd = syscall (__NR_timerfd_create, CLOCK_REALTIME, TFD_CLOEXEC);
if (fd == -1)
{
puts ("timerfd_create(TFD_CLOEXEC) failed");
return 1;
}
coe = fcntl (fd, F_GETFD);
if (coe == -1)
{
puts ("fcntl failed");
return 1;
}
if ((coe & FD_CLOEXEC) == 0)
{
puts ("timerfd_create(TFD_CLOEXEC) set close-on-exec flag");
return 1;
}
close (fd);
puts ("OK");
return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds the new eventfd2 syscall. It extends the old eventfd
syscall by one parameter which is meant to hold a flag value. In this
patch the only flag support is EFD_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.
A new name EFD_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.
The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>
#ifndef __NR_eventfd2
# ifdef __x86_64__
# define __NR_eventfd2 290
# elif defined __i386__
# define __NR_eventfd2 328
# else
# error "need __NR_eventfd2"
# endif
#endif
#define EFD_CLOEXEC O_CLOEXEC
int
main (void)
{
int fd = syscall (__NR_eventfd2, 1, 0);
if (fd == -1)
{
puts ("eventfd2(0) failed");
return 1;
}
int coe = fcntl (fd, F_GETFD);
if (coe == -1)
{
puts ("fcntl failed");
return 1;
}
if (coe & FD_CLOEXEC)
{
puts ("eventfd2(0) sets close-on-exec flag");
return 1;
}
close (fd);
fd = syscall (__NR_eventfd2, 1, EFD_CLOEXEC);
if (fd == -1)
{
puts ("eventfd2(EFD_CLOEXEC) failed");
return 1;
}
coe = fcntl (fd, F_GETFD);
if (coe == -1)
{
puts ("fcntl failed");
return 1;
}
if ((coe & FD_CLOEXEC) == 0)
{
puts ("eventfd2(EFD_CLOEXEC) does not set close-on-exec flag");
return 1;
}
close (fd);
puts ("OK");
return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds the new signalfd4 syscall. It extends the old signalfd
syscall by one parameter which is meant to hold a flag value. In this
patch the only flag support is SFD_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.
A new name SFD_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.
The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <signal.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>
#ifndef __NR_signalfd4
# ifdef __x86_64__
# define __NR_signalfd4 289
# elif defined __i386__
# define __NR_signalfd4 327
# else
# error "need __NR_signalfd4"
# endif
#endif
#define SFD_CLOEXEC O_CLOEXEC
int
main (void)
{
sigset_t ss;
sigemptyset (&ss);
sigaddset (&ss, SIGUSR1);
int fd = syscall (__NR_signalfd4, -1, &ss, 8, 0);
if (fd == -1)
{
puts ("signalfd4(0) failed");
return 1;
}
int coe = fcntl (fd, F_GETFD);
if (coe == -1)
{
puts ("fcntl failed");
return 1;
}
if (coe & FD_CLOEXEC)
{
puts ("signalfd4(0) set close-on-exec flag");
return 1;
}
close (fd);
fd = syscall (__NR_signalfd4, -1, &ss, 8, SFD_CLOEXEC);
if (fd == -1)
{
puts ("signalfd4(SFD_CLOEXEC) failed");
return 1;
}
coe = fcntl (fd, F_GETFD);
if (coe == -1)
{
puts ("fcntl failed");
return 1;
}
if ((coe & FD_CLOEXEC) == 0)
{
puts ("signalfd4(SFD_CLOEXEC) does not set close-on-exec flag");
return 1;
}
close (fd);
puts ("OK");
return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch just extends the anon_inode_getfd interface to take an additional
parameter with a flag value. The flag value is passed on to
get_unused_fd_flags in anticipation for a use with the O_CLOEXEC flag.
No actual semantic changes here, the changed callers all pass 0 for now.
[akpm@linux-foundation.org: KVM fix]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adds a check for an overflow in the filesystem size so if someone is
checking with statfs() on a 16G blocksize hugetlbfs in a 32bit binary that
it will report back EOVERFLOW instead of a size of 0.
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the ability to configure the hugetlb hstate used on a per mount basis.
- Add a new pagesize= option to the hugetlbfs mount that allows setting
the page size
- This option causes the mount code to find the hstate corresponding to the
specified size, and sets up a pointer to the hstate in the mount's
superblock.
- Change the hstate accessors to use this information rather than the
global_hstate they were using (requires a slight change in mm/memory.c
so we don't NULL deref in the error-unmap path -- see comments).
[np: take hstate out of hugetlbfs inode and vma->vm_private_data]
Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The goal of this patchset is to support multiple hugetlb page sizes. This
is achieved by introducing a new struct hstate structure, which
encapsulates the important hugetlb state and constants (eg. huge page
size, number of huge pages currently allocated, etc).
The hstate structure is then passed around the code which requires these
fields, they will do the right thing regardless of the exact hstate they
are operating on.
This patch adds the hstate structure, with a single global instance of it
(default_hstate), and does the basic work of converting hugetlb to use the
hstate.
Future patches will add more hstate structures to allow for different
hugetlbfs mounts to have different page sizes.
[akpm@linux-foundation.org: coding-style fixes]
Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch reserves huge pages at mmap() time for MAP_PRIVATE mappings in
a similar manner to the reservations taken for MAP_SHARED mappings. The
reserve count is accounted both globally and on a per-VMA basis for
private mappings. This guarantees that a process that successfully calls
mmap() will successfully fault all pages in the future unless fork() is
called.
The characteristics of private mappings of hugetlbfs files behaviour after
this patch are;
1. The process calling mmap() is guaranteed to succeed all future faults until
it forks().
2. On fork(), the parent may die due to SIGKILL on writes to the private
mapping if enough pages are not available for the COW. For reasonably
reliable behaviour in the face of a small huge page pool, children of
hugepage-aware processes should not reference the mappings; such as
might occur when fork()ing to exec().
3. On fork(), the child VMAs inherit no reserves. Reads on pages already
faulted by the parent will succeed. Successful writes will depend on enough
huge pages being free in the pool.
4. Quotas of the hugetlbfs mount are checked at reserve time for the mapper
and at fault time otherwise.
Before this patch, all reads or writes in the child potentially needs page
allocations that can later lead to the death of the parent. This applies
to reads and writes of uninstantiated pages as well as COW. After the
patch it is only a write to an instantiated page that causes problems.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[Summary]
Split LRU-list of unused dentries to one per superblock to avoid soft
lock up during NFS mounts and remounting of any filesystem.
Previously I posted here:
http://lkml.org/lkml/2008/3/5/590
[Descriptions]
- background
dentry_unused is a list of dentries which are not referenced.
dentry_unused grows up when references on directories or files are
released. This list can be very long if there is huge free memory.
- the problem
When shrink_dcache_sb() is called, it scans all dentry_unused linearly
under spin_lock(), and if dentry->d_sb is differnt from given
superblock, scan next dentry. This scan costs very much if there are
many entries, and very ineffective if there are many superblocks.
IOW, When we need to shrink unused dentries on one dentry, but scans
unused dentries on all superblocks in the system. For example, we scan
500 dentries to unmount a filesystem, but scans 1,000,000 or more unused
dentries on other superblocks.
In our case , At mounting NFS*, shrink_dcache_sb() is called to shrink
unused dentries on NFS, but scans 100,000,000 unused dentries on
superblocks in the system such as local ext3 filesystems. I hear NFS
mounting took 1 min on some system in use.
* : NFS uses virtual filesystem in rpc layer, so NFS is affected by
this problem.
100,000,000 is possible number on large systems.
Per-superblock LRU of unused dentried can reduce the cost in
reasonable manner.
- How to fix
I found this problem is solved by David Chinner's "Per-superblock
unused dentry LRU lists V3"(1), so I rebase it and add some fix to
reclaim with fairness, which is in Andrew Morton's comments(2).
1) http://lkml.org/lkml/2006/5/25/318
2) http://lkml.org/lkml/2006/5/25/320
Split LRU-list of unused dentries to each superblocks. Then, NFS
mounting will check dentries under a superblock instead of all. But
this spliting will break LRU of dentry-unused. So, I've attempted to
make reclaim unused dentrins with fairness by calculate number of
dentries to scan on this sb based on following way
number of dentries to scan on this sb =
count * (number of dentries on this sb / number of dentries in the machine)
- ToDo
- I have to measuring performance number and do stress tests.
- When unmount occurs during prune_dcache(), scanning on same
superblock, It is unable to reach next superblock because it is gone
away. We restart scannig superblock from first one, it causes
unfairness of reclaim unused dentries on first superblock. But I think
this happens very rarely.
- Test Results
Result on 6GB boxes with excessive unused dentries.
Without patch:
$ cat /proc/sys/fs/dentry-state
10181835 10180203 45 0 0 0
# mount -t nfs 10.124.60.70:/work/kernel-src nfs
real 0m1.830s
user 0m0.001s
sys 0m1.653s
With this patch:
$ cat /proc/sys/fs/dentry-state
10236610 10234751 45 0 0 0
# mount -t nfs 10.124.60.70:/work/kernel-src nfs
real 0m0.106s
user 0m0.002s
sys 0m0.032s
[akpm@linux-foundation.org: fix comments]
Signed-off-by: Kentaro Makita <k-makita@np.css.fujitsu.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: David Chinner <dgc@sgi.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The double indirection here is not needed anywhere and hence (at least)
confusing.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds proper extern declarations for five variables in
include/linux/vmstat.h
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In mode_to_acl when converting a Unix mode to a Windows ACL
the subauth fields of the SID in the ACL were translated
incorrectly on bigendian architectures
Signed-off-by: Steve French <sfrench@us.ibm.com>
fs/cifs/cifssmb.c:3917:13: warning: incorrect type in assignment (different base types)
fs/cifs/cifssmb.c:3917:13: expected bool [unsigned] [usertype] is_unicode
fs/cifs/cifssmb.c:3917:13: got restricted __le16
The comment explains why __force is used here.
fs/cifs/connect.c:458:16: warning: cast to restricted __be32
fs/cifs/connect.c:458:16: warning: cast to restricted __be32
fs/cifs/connect.c:458:16: warning: cast to restricted __be32
fs/cifs/connect.c:458:16: warning: cast to restricted __be32
fs/cifs/connect.c:458:16: warning: cast to restricted __be32
fs/cifs/connect.c:458:16: warning: cast to restricted __be32
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Move the code that handles ATTR_SIZE changes to its own function. This
makes for a smaller function and reduces the level of indentation.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (82 commits)
ipw2200: Call netif_*_queue() interfaces properly.
netxen: Needs to include linux/vmalloc.h
[netdrvr] atl1d: fix !CONFIG_PM build
r6040: rework init_one error handling
r6040: bump release number to 0.18
r6040: handle RX fifo full and no descriptor interrupts
r6040: change the default waiting time
r6040: use definitions for magic values in descriptor status
r6040: completely rework the RX path
r6040: call napi_disable when puting down the interface and set lp->dev accordingly.
mv643xx_eth: fix NETPOLL build
r6040: rework the RX buffers allocation routine
r6040: fix scheduling while atomic in r6040_tx_timeout
r6040: fix null pointer access and tx timeouts
r6040: prefix all functions with r6040
rndis_host: support WM6 devices as modems
at91_ether: use netstats in net_device structure
sfc: Create one RX queue and interrupt per CPU package by default
sfc: Use a separate workqueue for resets
sfc: I2C adapter initialisation fixes
...
get_proc_net() can now become static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (79 commits)
arm: bus_id -> dev_name() and dev_set_name() conversions
sparc64: fix up bus_id changes in sparc core code
3c59x: handle pci_name() being const
MTD: handle pci_name() being const
HP iLO driver
sysdev: Convert the x86 mce tolerant sysdev attribute to generic attribute
sysdev: Add utility functions for simple int/ulong variable sysdev attributes
sysdev: Pass the attribute to the low level sysdev show/store function
driver core: Suppress sysfs warnings for device_rename().
kobject: Transmit return value of call_usermodehelper() to caller
sysfs-rules.txt: reword API stability statement
debugfs: Implement debugfs_remove_recursive()
HOWTO: change email addresses of James in HOWTO
always enable FW_LOADER unless EMBEDDED=y
uio-howto.tmpl: use unique output names
uio-howto.tmpl: use standard copyright/legal markings
sysfs: don't call notify_change
sysdev: fix debugging statements in registration code.
kobject: should use kobject_put() in kset-example
kobject: reorder kobject to save space on 64 bit builds
...
struct pagemap_walk was placed on stack, some hooks are initialized, the
rest (->pgd_entry, ->pud_entry, ->pte_entry) are valid but junk.
Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Vegard Nossum" <vegard.nossum@gmail.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Linux kernel puts the filename argument of execve() into the new
address space. Many developers are surprised to learn this. Those who
know and could use it, object "But it's not documented."
Those who want to use it dislike the expression
(char *)(1+ strlen(env[-1+ n_env]) + env[-1+ n_env])
because it requires locating the last original environment variable,
and assumes that the filename follows the characters.
This patch documents the insertion of the filename, and makes it easier
to find by adding a new tag AT_EXECFN in the ElfXX_auxv_t; see <elf.h>.
In many cases readlink("/proc/self/exe",) gives the same answer. But if
all the original pages get unmapped, then the kernel erases the symlink
for /proc/self/exe. This can happen when a program decompressor does a
good job of cleaning up after uncompressing directly to memory, so that
the address space of the target program looks the same as if compression
had never happened. One example is http://upx.sourceforge.net .
One notable use of the underlying concept (what path containED the
executable) is glibc expanding $ORIGIN in DT_RUNPATH. In practice for
the near term, it may be a good idea for user-mode code to use both
/proc/self/exe and AT_EXECFN as fall-back methods for each other.
/proc/self/exe can fail due to unmapping, AT_EXECFN can fail because it
won't be present on non-new systems. The auxvec or {AT_EXECFN}.d_val
also can get overwritten, although in nearly all cases this would be the
result of a bug.
The runtime cost is one NEW_AUX_ENT using two words of stack space. The
underlying value is maintained already as bprm->exec; setup_arg_pages()
in fs/exec.c slides it for stack_shift, etc.
Signed-off-by: John Reiser <jreiser@BitWagon.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
driver core: Suppress sysfs warnings for device_rename().
Renaming network devices to an already existing name is not
something we want sysfs to print a scary warning for, since the
callers can deal with this correctly. So let's introduce
sysfs_create_link_nowarn() which gets rid of the common warning.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
debugfs_remove_recursive() will remove a dentry and all its children.
Drivers can use this to zap their whole debugfs tree so that they don't
need to keep track of every single debugfs dentry they created.
It may fail to remove the whole tree in certain cases:
sh-3.2# rmmod atmel-mci < /sys/kernel/debug/mmc0/ios/clock
mmc0: card b368 removed
atmel_mci atmel_mci.0: Lost dma0chan1, falling back to PIO
sh-3.2# ls /sys/kernel/debug/mmc0/
ios
But I'm not sure if that case can be handled in any sane manner.
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Pierre Ossman <drzeus-list@drzeus.cx>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sysfs_chmod_file() calls notify_change() to change the permission bits
on a sysfs file. Replace with explicit call to sysfs_setattr() and
fsnotify_change().
This is equivalent, except that security_inode_setattr() is not
called. This function is called by drivers, so the security checks do
not make any sense.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kobjects do not have a limit in name size since a while, so stop
pretending that they do.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'for-2.6.27' of git://linux-nfs.org/~bfields/linux: (51 commits)
nfsd: nfs4xdr.c do-while is not a compound statement
nfsd: Use C99 initializers in fs/nfsd/nfs4xdr.c
lockd: Pass "struct sockaddr *" to new failover-by-IP function
lockd: get host reference in nlmsvc_create_block() instead of callers
lockd: minor svclock.c style fixes
lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_lock
lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_testlock
lockd: nlm_release_host() checks for NULL, caller needn't
file lock: reorder struct file_lock to save space on 64 bit builds
nfsd: take file and mnt write in nfs4_upgrade_open
nfsd: document open share bit tracking
nfsd: tabulate nfs4 xdr encoding functions
nfsd: dprint operation names
svcrdma: Change WR context get/put to use the kmem cache
svcrdma: Create a kmem cache for the WR contexts
svcrdma: Add flush_scheduled_work to module exit function
svcrdma: Limit ORD based on client's advertised IRD
svcrdma: Remove unused wait q from svcrdma_xprt structure
svcrdma: Remove unneeded spin locks from __svc_rdma_free
svcrdma: Add dma map count and WARN_ON
...
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (1232 commits)
iucv: Fix bad merging.
net_sched: Add size table for qdiscs
net_sched: Add accessor function for packet length for qdiscs
net_sched: Add qdisc_enqueue wrapper
highmem: Export totalhigh_pages.
ipv6 mcast: Omit redundant address family checks in ip6_mc_source().
net: Use standard structures for generic socket address structures.
ipv6 netns: Make several "global" sysctl variables namespace aware.
netns: Use net_eq() to compare net-namespaces for optimization.
ipv6: remove unused macros from net/ipv6.h
ipv6: remove unused parameter from ip6_ra_control
tcp: fix kernel panic with listening_get_next
tcp: Remove redundant checks when setting eff_sacks
tcp: options clean up
tcp: Fix MD5 signatures for non-linear skbs
sctp: Update sctp global memory limit allocations.
sctp: remove unnecessary byteshifting, calculate directly in big-endian
sctp: Allow only 1 listening socket with SO_REUSEADDR
sctp: Do not leak memory on multiple listen() calls
sctp: Support ipv6only AF_INET6 sockets.
...
* 'configfs-fixup-ptr-error' of git://oss.oracle.com/git/jlbec/linux-2.6:
configfs: Allow ->make_item() and ->make_group() to return detailed errors.
Revert "configfs: Allow ->make_item() and ->make_group() to return detailed errors."
Move the line disciplines towards a conventional ->ops arrangement. For
the moment the actual 'tty_ldisc' struct in the tty is kept as part of
the tty struct but this can then be changed if it turns out that when it
all settles down we want to refcount ldiscs separately to the tty.
Pull the ldisc code out of /proc and put it with our ldisc code.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The WRITEMEM macro produces sparse warnings of the form:
fs/nfsd/nfs4xdr.c:2668:2: warning: do-while statement is not a compound statement
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Thanks to problem report and original patch from Harvey Harrison.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Benny Halevy <bhalevy@panasas.com>
There are already 7 of them - time to kill some duplicate code.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The configfs operations ->make_item() and ->make_group() currently
return a new item/group. A return of NULL signifies an error. Because
of this, -ENOMEM is the only return code bubbled up the stack.
Multiple folks have requested the ability to return specific error codes
when these operations fail. This patch adds that ability by changing the
->make_item/group() ops to return ERR_PTR() values. These errors are
bubbled up appropriately. NULL returns are changed to -ENOMEM for
compatibility.
Also updated are the in-kernel users of configfs.
This is a rework of reverted commit 11c3b79218.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
[PATCH] ocfs2: fix oops in mmap_truncate testing
configfs: call drop_link() to cleanup after create_link() failure
configfs: Allow ->make_item() and ->make_group() to return detailed errors.
configfs: Fix failing mkdir() making racing rmdir() fail
configfs: Fix deadlock with racing rmdir() and rename()
configfs: Make configfs_new_dirent() return error code instead of NULL
configfs: Protect configfs_dirent s_links list mutations
configfs: Introduce configfs_dirent_lock
ocfs2: Don't snprintf() without a format.
ocfs2: Fix CONFIG_OCFS2_DEBUG_FS #ifdefs
ocfs2/net: Silence build warnings on sparc64
ocfs2: Handle error during journal load
ocfs2: Silence an error message in ocfs2_file_aio_read()
ocfs2: use simple_read_from_buffer()
ocfs2: fix printk format warnings with OCFS2_FS_STATS=n
[PATCH 2/2] ocfs2: Instrument fs cluster locks
[PATCH 1/2] ocfs2: Add CONFIG_OCFS2_FS_STATS config option
This patch fixes a mmap_truncate bug which was found by ocfs2 test suite.
In an ocfs2 cluster more than 1 node, run program mmap_truncate, which races
mmap writes and truncates from multiple processes. While the test is
running, a stat from another node forces writeout, causing an oops in
ocfs2_get_block() because it sees a buffer to write which isn't allocated.
This patch fixed the bug by clear dirty and uptodate bits in buffer, leave
the buffer unmapped and return.
Fix is suggested by Mark Fasheh, and I code up the patch.
Signed-off-by: Coly Li <coyli@suse.de>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* 'for_linus' of git://git.infradead.org/~dedekind/ubifs-2.6:
UBIFS: include to compilation
UBIFS: add new flash file system
UBIFS: add brief documentation
MAINTAINERS: add UBIFS section
do_mounts: allow UBI root device name
VFS: export sync_sb_inodes
VFS: move inode_lock into sync_sb_inodes
* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (82 commits)
NFSv4: Remove BKL from the nfsv4 state recovery
SUNRPC: Remove the BKL from the callback functions
NFS: Remove BKL from the readdir code
NFS: Remove BKL from the symlink code
NFS: Remove BKL from the sillydelete operations
NFS: Remove the BKL from the rename, rmdir and unlink operations
NFS: Remove BKL from NFS lookup code
NFS: Remove the BKL from nfs_link()
NFS: Remove the BKL from the inode creation operations
NFS: Remove BKL usage from open()
NFS: Remove BKL usage from the write path
NFS: Remove the BKL from the permission checking code
NFS: Remove attribute update related BKL references
NFS: Remove BKL requirement from attribute updates
NFS: Protect inode->i_nlink updates using inode->i_lock
nfs: set correct fl_len in nlmclnt_test()
SUNRPC: Support registering IPv6 interfaces with local rpcbind daemon
SUNRPC: Refactor rpcb_register to make rpcbindv4 support easier
SUNRPC: None of rpcb_create's callers wants a privileged source port
SUNRPC: Introduce a specific rpcb_create for contacting localhost
...
Fix fs/compat_ioctl.c to handle CONFIG_BLOCK=n, CONFIG_SCSI=n to avoid
build errors:
In file included from include/scsi/scsi.h:12,
from fs/compat_ioctl.c:71:
include/scsi/scsi_cmnd.h:27:25: warning: "BLK_MAX_CDB" is not defined
include/scsi/scsi_cmnd.h:28:3: error: #error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
In file included from include/scsi/scsi.h:12,
from fs/compat_ioctl.c:71:
include/scsi/scsi_cmnd.h: In function 'scsi_bidi_cmnd':
include/scsi/scsi_cmnd.h:182: error: implicit declaration of function 'blk_bidi_rq'
include/scsi/scsi_cmnd.h:183: error: dereferencing pointer to incomplete type
include/scsi/scsi_cmnd.h: In function 'scsi_in':
include/scsi/scsi_cmnd.h:189: error: dereferencing pointer to incomplete type
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Push it into those callback functions that actually need it.
Note that all the NFS operations use their own locking, so don't need the
BKL. Ditto for the rpcbind client.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Page accesses are serialised using the page locks, whereas all attribute
updates are serialised using the inode->i_lock.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Page cache accesses are serialised using page locks, whereas attribute
updates are serialised using inode->i_lock.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Attribute updates are safe, and dentry operations are protected using VFS
level locks. Defer removing the BKL from sillyrename until a separate
patch.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
All dentry-related operations are already BKL-safe, since they are
protected by the VFS locking. No extra locks should be needed in the NFS
code.
In the case of nfs_revalidate_inode(), we're only doing an attribute
update (protected by the inode->i_lock).
In the case of nfs_lookup(), we're instantiating a new dentry, so there
should be no contention possible until after we call d_materialise_unique.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs_instantiate() does not require the BKL, neither do the attribute
updates or the RPC code.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
All the NFSv4 stateful operations are already protected by other locks (in
particular by the rpc_sequence locks.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The main problem is dealing with inode->i_size: we need to set the
inode->i_lock on all attribute updates, and so vmtruncate won't cut it.
Make an NFS-private version of vmtruncate that has the necessary locking
semantics.
The result should be that the following inode attribute updates are
protected by inode->i_lock
nfsi->cache_validity
nfsi->read_cache_jiffies
nfsi->attrtimeo
nfsi->attrtimeo_timestamp
nfsi->change_attr
nfsi->last_updated
nfsi->cache_change_attribute
nfsi->access_cache
nfsi->access_cache_entry_lru
nfsi->access_cache_inode_lru
nfsi->acl_access
nfsi->acl_default
nfsi->nfs_page_tree
nfsi->ncommit
nfsi->npages
nfsi->open_files
nfsi->silly_list
nfsi->acl
nfsi->open_states
inode->i_size
inode->i_atime
inode->i_mtime
inode->i_ctime
inode->i_nlink
inode->i_uid
inode->i_gid
The following is protected by dir->i_mutex
nfsi->cookieverf
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
fcntl(F_GETLK) on an nfs client incorrectly returns
the values for the conflicting lock. fl_len value is
always 1.
If the conflicting lock is (0, 4095) the F_GETLK
request for (1024, 10) returns (0, 1), which doesn't
even cover the requested range, and is quite confusing.
The fix is trivial, set fl_end from the fl_end value
recieved from the nfs server.
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Pass a more generic socket address type to nlmsvc_unlock_all_by_ip() to
allow for future support of IPv6. Also provide additional sanity
checking in failover_unlock_ip() when constructing the server's IP
address.
As an added bonus, provide clean kerneldoc comments on related NLM
interfaces which were recently added.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
It may not be obvious (till you look at the definition of
nlm_alloc_call()) that a function like nlmsvc_create_block() should
consume a reference on success or failure, so I find it clearer if it
takes the reference it needs itself.
And both callers already do this immediately before the call anyway.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
nlmsvc_lock calls nlmsvc_lookup_host to find a nlm_host struct. The
callers of this function, however, call nlmsvc_retrieve_args or
nlm4svc_retrieve_args, which also return a nlm_host struct.
Change nlmsvc_lock to take a host arg instead of calling
nlmsvc_lookup_host itself and change the callers to pass a pointer to
the nlm_host they've already found.
Since nlmsvc_testlock() now just uses the caller's reference, we no
longer need to get or release it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
nlmsvc_testlock calls nlmsvc_lookup_host to find a nlm_host struct. The
callers of this functions, however, call nlmsvc_retrieve_args or
nlm4svc_retrieve_args, which also return a nlm_host struct.
Change nlmsvc_testlock to take a host arg instead of calling
nlmsvc_lookup_host itself and change the callers to pass a pointer to
the nlm_host they've already found.
We take a reference to host in the place where nlmsvc_testlock()
previous did a new lookup, so the reference counting is unchanged from
before.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
jfs: remove DIRENTSIZ
JFS: diAlloc() should return -EIO rather than EIO
JFS: skip bad iput() call in error path
JFS: switch to seq_files
JFS: 0 is not valid errno value so return NULL from jfs_lookup
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (61 commits)
ext4: Documention update for new ordered mode and delayed allocation
ext4: do not set extents feature from the kernel
ext4: Don't allow nonextenst mount option for large filesystem
ext4: Enable delalloc by default.
ext4: delayed allocation i_blocks fix for stat
ext4: fix delalloc i_disksize early update issue
ext4: Handle page without buffers in ext4_*_writepage()
ext4: Add ordered mode support for delalloc
ext4: Invert lock ordering of page_lock and transaction start in delalloc
mm: Add range_cont mode for writeback
ext4: delayed allocation ENOSPC handling
percpu_counter: new function percpu_counter_sum_and_set
ext4: Add delayed allocation support in data=writeback mode
vfs: add hooks for ext4's delayed allocation support
jbd2: Remove data=ordered mode support using jbd buffer heads
ext4: Use new framework for data=ordered mode in JBD2
jbd2: Implement data=ordered mode handling via inodes
vfs: export filemap_fdatawrite_range()
ext4: Fix lock inversion in ext4_ext_truncate()
ext4: Invert the locking order of page_lock and transaction start
...
Add UBIFS to Makefile and Kbuild.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
This is a new flash file system. See
http://www.linux-mtd.infradead.org/doc/ubifs.html
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
When allow_link() succeeds but create_link() fails, the subsystem is not
informed of the failure.
This patch fixes this by calling drop_link() on create_link() failures.
Signed-off-by: Louis Rilling <Louis.Rilling@kerlabs.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The configfs operations ->make_item() and ->make_group() currently
return a new item/group. A return of NULL signifies an error. Because
of this, -ENOMEM is the only return code bubbled up the stack.
Multiple folks have requested the ability to return specific error codes
when these operations fail. This patch adds that ability by changing the
->make_item/group() ops to return an int.
Also updated are the in-kernel users of configfs.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
When fixing the rename() vs rmdir() deadlock, we stopped locking default groups'
inodes in configfs_detach_prep(), letting racing mkdir() in default groups
proceed concurrently. This enables races like below happen, which leads to a
failing mkdir() making rmdir() fail, despite the group to remove having no
user-created directory under it in the end.
process A: process B:
/* PWD=A/B */
mkdir("C")
make_item("C")
attach_group("C")
rmdir("A")
detach_prep("A")
detach_prep("B")
error because of "C"
return -ENOTEMPTY
attach_group("C/D")
error (eg -ENOMEM)
return -ENOMEM
This patch prevents such scenarii by making rmdir() wait as long as
detach_prep() fails because a racing mkdir() is in the middle of attach_group().
To achieve this, mkdir() sets a flag CONFIGFS_USET_IN_MKDIR in parent's
configfs_dirent before calling attach_group(), and clears the flag once
attach_group() is done. detach_prep() fails with -EAGAIN whenever the flag is
hit and returns the guilty inode's mutex so that rmdir() can wait on it.
Signed-off-by: Louis Rilling <Louis.Rilling@kerlabs.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch fixes the deadlock between racing sys_rename() and configfs_rmdir().
The idea is to avoid locking i_mutexes of default groups in
configfs_detach_prep(), and rely instead on the new configfs_dirent_lock to
protect against configfs_dirent's linkage mutations. To ensure that an mkdir()
racing with rmdir() will not create new items in a to-be-removed default group,
we make configfs_new_dirent() check for the CONFIGFS_USET_DROPPING flag right
before linking the new dirent, and return error if the flag is set. This makes
racing mkdir()/symlink()/dir_open() fail in places where errors could already
happen, resp. in (attach_item()|attach_group())/create_link()/new_dirent().
configfs_depend() remains safe since it locks all the path from configfs root,
and is thus mutually exclusive with rmdir().
An advantage of this is that now detach_groups() unconditionnaly takes the
default groups i_mutex, which makes it more consistent with populate_groups().
Signed-off-by: Louis Rilling <Louis.Rilling@kerlabs.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch makes configfs_new_dirent return negative error code instead of NULL,
which will be useful in the next patch to differentiate ENOMEM from ENOENT.
Signed-off-by: Louis Rilling <Louis.Rilling@kerlabs.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Symlinks to a config_item are listed under its configfs_dirent s_links, but the
list mutations are not protected by any common lock.
This patch uses the configfs_dirent_lock spinlock to add the necessary
protection.
Note: we should also protect the list_empty() test in configfs_detach_prep() but
1/ the lock should not be released immediately because nothing would prevent the
list from being filled after a successful list_empty() test, making the problem
tricky,
2/ this will be solved by the rmdir() vs rename() deadlock bugfix.
Signed-off-by: Louis Rilling <Louis.Rilling@kerlabs.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch introduces configfs_dirent_lock spinlock to protect configfs_dirent
traversals against linkage mutations (add/del/move). This will allow
configfs_detach_prep() to avoid locking i_mutexes.
Locking rules for configfs_dirent linkage mutations are the same plus the
requirement of taking configfs_dirent_lock. For configfs_dirent walking, one can
either take appropriate i_mutex as before, or take configfs_dirent_lock.
The spinlock could actually be a mutex, but the critical sections are either
O(1) or should not be too long (default groups walking in last patch).
ChangeLog:
- Clarify the comment on configfs_dirent_lock usage
- Move sd->s_element init before linking the new dirent
- In lseek(), do not release configfs_dirent_lock before the dirent is
relinked.
Signed-off-by: Louis Rilling <Louis.Rilling@kerlabs.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Some system files are per-slot. Their names include the slot number.
ocfs2_sprintf_system_inode_name() uses the system inode definitions to
fill in the slot number with snprintf().
For global system files, there is no node number, and the name was
printed as a format with no arguments. -Wformat-nonliteral and
-Wformat-security don't like this. Instead, use a static "%s" format
and the name as the argument.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
A couple places use OCFS2_DEBUG_FS where they really mean
CONFIG_OCFS2_DEBUG_FS.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
suseconds_t is type long on most arches except sparc64 where it is type int.
This patch silences the following warnings that are generated when building
on it.
netdebug.c: In function 'nst_seq_show':
netdebug.c:152: warning: format '%lu' expects type 'long unsigned int', but argument 13 has type 'suseconds_t'
netdebug.c:152: warning: format '%lu' expects type 'long unsigned int', but argument 15 has type 'suseconds_t'
netdebug.c:152: warning: format '%lu' expects type 'long unsigned int', but argument 17 has type 'suseconds_t'
netdebug.c: In function 'sc_seq_show':
netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 19 has type 'suseconds_t'
netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 21 has type 'suseconds_t'
netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 23 has type 'suseconds_t'
netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 25 has type 'suseconds_t'
netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 27 has type 'suseconds_t'
netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 29 has type 'suseconds_t'
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch ensures the mount fails if the fs is unable to load the journal.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Acked-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch silences an EINVAL error message in ocfs2_file_aio_read()
that is always due to a user error.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Fix printk format warnings when OCFS2_FS_STATS=n:
linux-next-20080528/fs/ocfs2/dlmglue.c: In function 'ocfs2_dlm_seq_show':
linux-next-20080528/fs/ocfs2/dlmglue.c:2623: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'int'
linux-next-20080528/fs/ocfs2/dlmglue.c:2623: warning: format '%llu' expects type 'long long unsigned int', but argument 4 has type 'int'
linux-next-20080528/fs/ocfs2/dlmglue.c:2623: warning: format '%llu' expects type 'long long unsigned int', but argument 7 has type 'int'
linux-next-20080528/fs/ocfs2/dlmglue.c:2623: warning: format '%llu' expects type 'long long unsigned int', but argument 8 has type 'int'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch adds code to track the number of times the fs takes
various cluster locks as well as the times associated with it.
The information is made available to users via debugfs.
This patch was originally written by Jan Kara <jack@suse.cz>.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch adds config option CONFIG_OCFS2_FS_STATS to allow building
the fs with instrumentation enabled. An upcoming patch will provide
support to instrument cluster locking, which is a crucial overhead in
a cluster file system. This config option allows users to avoid the cpu
and memory overhead that is involved in gathering such statistics.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (25 commits)
security: remove register_security hook
security: remove dummy module fix
security: remove dummy module
security: remove unused sb_get_mnt_opts hook
LSM/SELinux: show LSM mount options in /proc/mounts
SELinux: allow fstype unknown to policy to use xattrs if present
security: fix return of void-valued expressions
SELinux: use do_each_thread as a proper do/while block
SELinux: remove unused and shadowed addrlen variable
SELinux: more user friendly unknown handling printk
selinux: change handling of invalid classes (Was: Re: 2.6.26-rc5-mm1 selinux whine)
SELinux: drop load_mutex in security_load_policy
SELinux: fix off by 1 reference of class_to_string in context_struct_compute_av
SELinux: open code sidtab lock
SELinux: open code load_mutex
SELinux: open code policy_rwlock
selinux: fix endianness bug in network node address handling
selinux: simplify ioctl checking
SELinux: enable processes with mac_admin to get the raw inode contexts
Security: split proc ptrace checking into read vs. attach
...
Shen Feng