Commit Graph

118 Commits

Author SHA1 Message Date
Benjamin Coddington 184cefbe62 NLM: Defend against file_lock changes after vfs_test_lock()
Instead of trusting that struct file_lock returns completely unchanged
after vfs_test_lock() when there's no conflicting lock, stash away our
nlm_lockowner reference so we can properly release it for all cases.

This defends against another file_lock implementation overwriting fl_owner
when the return type is F_UNLCK.

Reported-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Tested-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2022-07-29 20:08:56 -04:00
J. Bruce Fields 40595cdc93 nfs: block notification on fs with its own ->lock
NFSv4.1 supports an optional lock notification feature which notifies
the client when a lock comes available.  (Normally NFSv4 clients just
poll for locks if necessary.)  To make that work, we need to request a
blocking lock from the filesystem.

We turned that off for NFS in commit f657f8eef3 ("nfs: don't atempt
blocking locks on nfs reexports") [sic] because it actually blocks the
nfsd thread while waiting for the lock.

Thanks to Vasily Averin for pointing out that NFS isn't the only
filesystem with that problem.

Any filesystem that leaves ->lock NULL will use posix_lock_file(), which
does the right thing.  Simplest is just to assume that any filesystem
that defines its own ->lock is not safe to request a blocking lock from.

So, this patch mostly reverts commit f657f8eef3 ("nfs: don't atempt
blocking locks on nfs reexports") [sic] and commit b840be2f00 ("lockd:
don't attempt blocking locks on nfs reexports"), and instead uses a
check of ->lock (Vasily's suggestion) to decide whether to support
blocking lock notifications on a given filesystem.  Also add a little
documentation.

Perhaps someday we could add back an export flag later to allow
filesystems with "good" ->lock methods to support blocking lock
notifications.

Reported-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[ cel: Description rewritten to address checkpatch nits ]
[ cel: Fixed warning when SUNRPC debugging is disabled ]
[ cel: Fixed NULL check ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Vasily Averin <vvs@virtuozzo.com>
2022-01-08 14:42:01 -05:00
J. Bruce Fields 7f024fcd5c Keep read and write fds with each nlm_file
We shouldn't really be using a read-only file descriptor to take a write
lock.

Most filesystems will put up with it.  But NFS, for example, won't.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-08-23 18:05:31 -04:00
J. Bruce Fields 2dc6f19e4f nlm: minor nlm_lookup_file argument change
It'll come in handy to get the whole nlm_lock.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-08-23 12:56:03 -04:00
Christoph Hellwig fb7dd0a1ba lockd: remove __KERNEL__ ifdefs
Remove the __KERNEL__ ifdefs from the non-UAPI sunrpc headers,
as those can't be included from user space programs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-11-12 11:43:29 -05:00
Benjamin Coddington 89e0edfbea lockd: Convert NLM service fl_owner to nlm_lockowner
Do as the NLM client: allocate and track a struct nlm_lockowner for use as
the fl_owner for locks created by the NLM sever.  This allows us to keep
the svid within this structure for matching locks, and will allow us to
track the pid of lockd in a future patch.  It should also allow easier
reference of the nlm_host in conflicting locks, and simplify lock hashing
and comparison.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
[bfields@redhat.com: fix type of some error returns]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-03 17:52:08 -04:00
Trond Myklebust b422df915c lockd: Store the lockd client credential in struct nlm_host
When we create a new lockd client, we want to be able to pass the
correct credential of the process that created the struct nlm_host.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-04-26 17:51:23 -04:00
Amir Goldstein 64bed6cbe3 nfsd: fix leaked file lock with nfs exported overlayfs
nfsd and lockd call vfs_lock_file() to lock/unlock the inode
returned by locks_inode(file).

Many places in nfsd/lockd code use the inode returned by
file_inode(file) for lock manipulation. With Overlayfs, file_inode()
(the underlying inode) is not the same object as locks_inode() (the
overlay inode). This can result in "Leaked POSIX lock" messages
and eventually to a kernel crash as reported by Eddie Horng:
https://marc.info/?l=linux-unionfs&m=153086643202072&w=2

Fix all the call sites in nfsd/lockd that should use locks_inode().
This is a correctness bug that manifested when overlayfs gained
NFS export support in v4.16.

Reported-by: Eddie Horng <eddiehorng.tw@gmail.com>
Tested-by: Eddie Horng <eddiehorng.tw@gmail.com>
Cc: Jeff Layton <jlayton@kernel.org>
Fixes: 8383f17488 ("ovl: wire up NFS export operations")
Cc: stable@vger.kernel.org
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-09 16:11:21 -04:00
Elena Reshetova fbca30c513 lockd: convert nlm_rqst.a_count from atomic_t to refcount_t
atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable nlm_rqst.a_count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.

**Important note for maintainers:

Some functions from refcount_t API defined in lib/refcount.c
have different memory ordering guarantees than their atomic
counterparts.
The full comparison can be seen in
https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon
in state to be merged to the documentation tree.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in
some rare cases it might matter.
Please double check that you don't have some undocumented
memory guarantees for this variable usage.

For the nlm_rqst.a_count it might make a difference
in following places:
 - nlmclnt_release_call() and nlmsvc_release_call(): decrement
   in refcount_dec_and_test() only
   provides RELEASE ordering and control dependency on success
   vs. fully ordered atomic counterpart

Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2018-01-14 23:06:30 -05:00
Elena Reshetova 431f125b67 lockd: convert nlm_lockowner.count from atomic_t to refcount_t
atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable nlm_lockowner.count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.

**Important note for maintainers:

Some functions from refcount_t API defined in lib/refcount.c
have different memory ordering guarantees than their atomic
counterparts.
The full comparison can be seen in
https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon
in state to be merged to the documentation tree.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in
some rare cases it might matter.
Please double check that you don't have some undocumented
memory guarantees for this variable usage.

For the nlm_lockowner.count it might make a difference
in following places:
 - nlm_put_lockowner(): decrement in refcount_dec_and_lock() only
   provides RELEASE ordering, control dependency on success and
   holds a spin lock on success vs. fully ordered atomic counterpart.
   No changes in spin lock guarantees.

Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2018-01-14 23:06:29 -05:00
Elena Reshetova c751082cef lockd: convert nsm_handle.sm_count from atomic_t to refcount_t
atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable nsm_handle.sm_count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.

**Important note for maintainers:

Some functions from refcount_t API defined in lib/refcount.c
have different memory ordering guarantees than their atomic
counterparts.
The full comparison can be seen in
https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon
in state to be merged to the documentation tree.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in
some rare cases it might matter.
Please double check that you don't have some undocumented
memory guarantees for this variable usage.

For the nsm_handle.sm_count it might make a difference
in following places:
 - nsm_release(): decrement in refcount_dec_and_lock() only
   provides RELEASE ordering, control dependency on success
   and holds a spin lock on success vs. fully ordered atomic
   counterpart. No change for the spin lock guarantees.

Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2018-01-14 23:06:29 -05:00
Elena Reshetova fee21fb587 lockd: convert nlm_host.h_count from atomic_t to refcount_t
atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable nlm_host.h_count  is used as pure reference counter.
Convert it to refcount_t and fix up the operations.

**Important note for maintainers:

Some functions from refcount_t API defined in lib/refcount.c
have different memory ordering guarantees than their atomic
counterparts.
The full comparison can be seen in
https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon
in state to be merged to the documentation tree.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in
some rare cases it might matter.
Please double check that you don't have some undocumented
memory guarantees for this variable usage.

For the nlm_host.h_count it might make a difference
in following places:
 - nlmsvc_release_host(): decrement in refcount_dec()
   provides RELEASE ordering, while original atomic_dec()
   was fully unordered. Since the change is for better, it
   should not matter.
 - nlmclnt_release_host(): decrement in refcount_dec_and_test() only
   provides RELEASE ordering and control dependency on success
   vs. fully ordered atomic counterpart. It doesn't seem to
   matter in this case since object freeing happens under mutex
   lock anyway.

Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2018-01-14 23:06:29 -05:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Christoph Hellwig 860bda29b9 sunrpc: mark all struct svc_procinfo instances as const
struct svc_procinfo contains function pointers, and marking it as
constant avoids it being able to be used as an attach vector for
code injections.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-15 17:42:31 +02:00
Benjamin Coddington b1ece737f4 lockd: Introduce nlmclnt_operations
NFS would enjoy the ability to modify the behavior of the NLM client's
unlock RPC task in order to delay the transmission of the unlock until IO
that was submitted under that lock has completed.  This ability can ensure
that the NLM client will always complete the transmission of an unlock even
if the waiting caller has been interrupted with fatal signal.

For this purpose, a pointer to a struct nlmclnt_operations can be assigned
in a nfs_module's nfs_rpc_ops that will install those nlmclnt_operations on
the nlm_host.  The struct nlmclnt_operations defines three callback
operations that will be used in a following patch:

nlmclnt_alloc_call - used to call back after a successful allocation of
	a struct nlm_rqst in nlmclnt_proc().

nlmclnt_unlock_prepare - used to call back during NLM unlock's
	rpc_call_prepare.  The NLM client defers calling rpc_call_start()
	until this callback returns false.

nlmclnt_release_call - used to call back when the NLM client's struct
	nlm_rqst is freed.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-04-21 10:45:01 -04:00
Trond Myklebust 251af29c32 nlm: Ensure callback code also checks that the files match
It is not sufficient to just check that the lock pids match when
granting a callback, we also need to ensure that we're granting
the callback on the right file.

Reported-by: Pankaj Singh <psingh.ait@gmail.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-02-13 17:02:50 -05:00
Andrey Ryabinin 0d0f4aab4e lockd: get rid of reference-counted NSM RPC clients
Currently we have reference-counted per-net NSM RPC client
which created on the first monitor request and destroyed
after the last unmonitor request. It's needed because
RPC client need to know 'utsname()->nodename', but utsname()
might be NULL when nsm_unmonitor() called.

So instead of holding the rpc client we could just save nodename
in struct nlm_host and pass it to the rpc_create().
Thus ther is no need in keeping rpc client until last
unmonitor request. We could create separate RPC clients
for each monitor/unmonitor requests.

Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-10-23 15:57:27 -04:00
Andrey Ryabinin 0ad95472bf lockd: create NSM handles per net namespace
Commit cb7323fffa ("lockd: create and use per-net NSM
 RPC clients on MON/UNMON requests") introduced per-net
NSM RPC clients. Unfortunately this doesn't make any sense
without per-net nsm_handle.

E.g. the following scenario could happen
Two hosts (X and Y) in different namespaces (A and B) share
the same nsm struct.

1. nsm_monitor(host_X) called => NSM rpc client created,
	nsm->sm_monitored bit set.
2. nsm_mointor(host-Y) called => nsm->sm_monitored already set,
	we just exit. Thus in namespace B ln->nsm_clnt == NULL.
3. host X destroyed => nsm->sm_count decremented to 1
4. host Y destroyed => nsm_unmonitor() => nsm_mon_unmon() => NULL-ptr
	dereference of *ln->nsm_clnt

So this could be fixed by making per-net nsm_handles list,
instead of global. Thus different net namespaces will not be able
share the same nsm_handle.

Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-10-12 17:31:05 -04:00
Jeff Layton 09802fd2a8 lockd: rip out deferred lock handling from testlock codepath
As Kinglong points out, the nlm_block->b_fl field is no longer used at
all. Also, vfs_test_lock in the generic locking code will only return
FILE_LOCK_DEFERRED if FL_SLEEP is set, and it isn't here.

The only other place that returns that value is the DLM lock code, but
it only does that in dlm_posix_lock, never in dlm_posix_get.

Remove all of the deferred locking code from the testlock codepath
since it doesn't appear to ever be used anyway.

I do have a small concern that this might cause a behavior change in the
case where you have a block already sitting on the list when the
testlock request comes in, but that looks like it doesn't really work
properly anyway. I think it's best to just pass that down to
vfs_test_lock and let the filesystem report that instead of trying to
infer what's going on with the lock by looking at an existing block.

Cc: cluster-devel@redhat.com
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Kinglong Mee <kinglongmee@gmail.com>
2014-09-09 16:01:09 -04:00
Christoph Hellwig 9c69de4c94 nfsd: remove <linux/nfsd/nfsfh.h>
The only real user of this header is fs/nfsd/nfsfh.h, so merge the
two.  Various lockѕ source files used it to indirectly get other
sunrpc or nfs headers, so fix those up.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-05-06 17:54:53 -04:00
Linus Torvalds b6669737d3 Merge branch 'for-3.9' of git://linux-nfs.org/~bfields/linux
Pull nfsd changes from J Bruce Fields:
 "Miscellaneous bugfixes, plus:

   - An overhaul of the DRC cache by Jeff Layton.  The main effect is
     just to make it larger.  This decreases the chances of intermittent
     errors especially in the UDP case.  But we'll need to watch for any
     reports of performance regressions.

   - Containerized nfsd: with some limitations, we now support
     per-container nfs-service, thanks to extensive work from Stanislav
     Kinsbursky over the last year."

Some notes about conflicts, since there were *two* non-data semantic
conflicts here:

 - idr_remove_all() had been added by a memory leak fix, but has since
   become deprecated since idr_destroy() does it for us now.

 - xs_local_connect() had been added by this branch to make AF_LOCAL
   connections be synchronous, but in the meantime Trond had changed the
   calling convention in order to avoid a RCU dereference.

There were a couple of more obvious actual source-level conflicts due to
the hlist traversal changes and one just due to code changes next to
each other, but those were trivial.

* 'for-3.9' of git://linux-nfs.org/~bfields/linux: (49 commits)
  SUNRPC: make AF_LOCAL connect synchronous
  nfsd: fix compiler warning about ambiguous types in nfsd_cache_csum
  svcrpc: fix rpc server shutdown races
  svcrpc: make svc_age_temp_xprts enqueue under sv_lock
  lockd: nlmclnt_reclaim(): avoid stack overflow
  nfsd: enable NFSv4 state in containers
  nfsd: disable usermode helper client tracker in container
  nfsd: use proper net while reading "exports" file
  nfsd: containerize NFSd filesystem
  nfsd: fix comments on nfsd_cache_lookup
  SUNRPC: move cache_detail->cache_request callback call to cache_read()
  SUNRPC: remove "cache_request" argument in sunrpc_cache_pipe_upcall() function
  SUNRPC: rework cache upcall logic
  SUNRPC: introduce cache_detail->cache_request callback
  NFS: simplify and clean cache library
  NFS: use SUNRPC cache creation and destruction helper for DNS cache
  nfsd4: free_stid can be static
  nfsd: keep a checksum of the first 256 bytes of request
  sunrpc: trim off trailing checksum before returning decrypted or integrity authenticated buffer
  sunrpc: fix comment in struct xdr_buf definition
  ...
2013-02-28 18:02:55 -08:00
Al Viro 496ad9aa8e new helper: file_inode(file)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22 23:31:31 -05:00
Tim Gardner f25cc71e63 lockd: nlmclnt_reclaim(): avoid stack overflow
Even though nlmclnt_reclaim() is only one call into the stack frame,
928 bytes on the stack seems like a lot. Recode to dynamically
allocate the request structure once from within the reclaimer task,
then pass this pointer into nlmclnt_reclaim() for reuse on
subsequent calls.

smatch analysis:

fs/lockd/clntproc.c:620 nlmclnt_reclaim() warn: 'reqst' puts
 928 bytes on stack

Also remove redundant assignment of 0 after memset.

Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-02-15 11:29:38 -05:00
Stanislav Kinsbursky 5ccb0066f2 LockD: pass actual network namespace to grace period management functions
Passed network namespace replaced hard-coded init_net

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-07-27 16:49:22 -04:00
Stanislav Kinsbursky b26411f85d LockD: mark host per network namespace on garbage collect
This is required for per-network NLM shutdown and cleanup.
This patch passes init_net for a while.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-07-27 16:48:43 -04:00
Stanislav Kinsbursky 3b64739fb9 Lockd: shutdown NLM hosts in network namespace context
Lockd now managed in network namespace context. And this patch introduces
network namespace related NLM hosts shutdown in case of releasing per-net Lockd
resources.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-02-15 00:19:48 -05:00
Stanislav Kinsbursky 66697bfd6a LockD: make nlm hosts network namespace aware
This object depends on RPC client, and thus on network namespace.
So let's make it's allocation and lookup in network namespace context.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-02-15 00:19:48 -05:00
Trond Myklebust a613fa168a SUNRPC: constify the rpc_program
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-01-31 19:28:20 -05:00
Rusty Russell 90ab5ee941 module_param: make bool parameters really bool (drivers & misc)
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 09:32:20 +10:30
Eric Dumazet dfd56b8b38 net: use IS_ENABLED(CONFIG_IPV6)
Instead of testing defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-11 18:25:16 -05:00
Chuck Lever 67216b94d4 lockd: Clean up nlmsvc_lookup_host()
Clean up.

Change nlmsvc_lookup_host() to be purpose-built for server-side
nlm_host management.  This replaces the generic nlm_lookup_host()
helper function, just like on the client side.  The lookup logic is
specialized for server host lookups.

The server side cache also gets its own specialized equivalent of the
nlm_release_host() function.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16 12:37:26 -05:00
Chuck Lever 8ea6ecc8b0 lockd: Create client-side nlm_host cache
NFS clients don't need the garbage collection processing that is
performed on nlm_host structures.  The client picks up an nlm_host at
mount time and holds a reference to it until the file system is
unmounted.

Servers, on the other hand, don't have a precise way to tell when an
nlm_host is no longer being used, so zero refcount nlm_host entries
are left to expire in the cache after a time.

Basically there's nothing holding a reference to an nlm_host between
individual server-side NLM requests, but we can't afford the expense
of recreating them for every new NLM request from a client.  The
nlm_host cache adds some lifetime hysteresis to entries in the cache
so the next time a particular nlm_host is needed, it's likely to be
discovered by a lookup rather than created from whole cloth.

With the new implementation, client nlm_host cache items are no longer
garbage collected, and are destroyed directly by a new release
function specialized for client entries, nlmclnt_release_host().  They
are cached in their own data structure, and have their own lookup
logic, simplified and specialized for client nlm_host entries.

However, the client nlm_host cache still shares reboot recovery logic
with the server nlm_host cache.  The NSM "peer rebooted" downcall for
clients and servers still come through the same RPC call.  This is a
legacy formal API that would be difficult to alter, and besides, the
user space NSM implementation can't tell the difference between peers
that are clients or servers.

For this reason, the client cache continues to share the
nlm_host_mutex (and reboot recovery logic) with the server cache.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16 12:37:26 -05:00
Chuck Lever 7db836d4a4 lockd: Split nlm_release_call()
The nlm_release_call() function is invoked from both the server and
the client side.  We're about to introduce a distinct server- and
client-side nlm_release_host(), so nlm_release_call() must first be
split into a client-side and a server-side version.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16 12:37:26 -05:00
Trond Myklebust 8e35f8e7c6 NLM: Fix a regression in lockd
Nick Bowler reports:
There are no unusual messages on the client... but I just logged into
the server and I see lots of messages of the following form:

  nfsd: request from insecure port (192.168.8.199:35766)!
  nfsd: request from insecure port (192.168.8.199:35766)!
  nfsd: request from insecure port (192.168.8.199:35766)!
  nfsd: request from insecure port (192.168.8.199:35766)!
  nfsd: request from insecure port (192.168.8.199:35766)!

Bisected to commit 9247685088 (SUNRPC:
Properly initialize sock_xprt.srcaddr in all cases)

Apparently, removing the 'transport->srcaddr.ss_family = family' from
xs_create_sock() triggers this due to nlmclnt_lookup_host() incorrectly
initialising the srcaddr family to AF_UNSPEC.

Reported-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-11-15 20:44:26 -05:00
Linus Torvalds a87e84b5cd Merge branch 'for-2.6.32' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.32' of git://linux-nfs.org/~bfields/linux: (68 commits)
  nfsd4: nfsv4 clients should cross mountpoints
  nfsd: revise 4.1 status documentation
  sunrpc/cache: avoid variable over-loading in cache_defer_req
  sunrpc/cache: use list_del_init for the list_head entries in cache_deferred_req
  nfsd: return success for non-NFS4 nfs4_state_start
  nfsd41: Refactor create_client()
  nfsd41: modify nfsd4.1 backchannel to use new xprt class
  nfsd41: Backchannel: Implement cb_recall over NFSv4.1
  nfsd41: Backchannel: cb_sequence callback
  nfsd41: Backchannel: Setup sequence information
  nfsd41: Backchannel: Server backchannel RPC wait queue
  nfsd41: Backchannel: Add sequence arguments to callback RPC arguments
  nfsd41: Backchannel: callback infrastructure
  nfsd4: use common rpc_cred for all callbacks
  nfsd4: allow nfs4 state startup to fail
  SUNRPC: Defer the auth_gss upcall when the RPC call is asynchronous
  nfsd4: fix null dereference creating nfsv4 callback client
  nfsd4: fix whitespace in NFSPROC4_CLNT_CB_NULL definition
  nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel
  sunrpc/cache: simplify cache_fresh_locked and cache_fresh_unlocked.
  ...
2009-09-22 07:54:33 -07:00
Alexey Dobriyan 7b021967c5 const: make lock_manager_operations const
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:25 -07:00
Jeff Layton 4516fc0454 sunrpc: add routine for comparing addresses
lockd needs these sort of routines, as does the NFSv4 callback code.

Move lockd's routines into common code and rename them so that they can
be used by others.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-08-21 11:27:42 -04:00
Chuck Lever 6c9dc42551 lockd: Update NSM state from SM_MON replies
When rpc.statd starts up in user space at boot time, it attempts to
write the latest NSM local state number into
/proc/sys/fs/nfs/nsm_local_state.

If lockd.ko isn't loaded yet (as is the case in most configurations),
that file doesn't exist, thus the kernel's NSM state remains set to
its initial value of zero during lockd operation.

This is a problem because rpc.statd and lockd use the NSM state number
to prevent repeated lock recovery on rebooted hosts.  If lockd sends
a zero NSM state, but then a delayed SM_NOTIFY with a real NSM state
number is received, there is no way for lockd or rpc.statd to
distinguish that stale SM_NOTIFY from an actual reboot.  Thus lock
recovery could be performed after the rebooted host has already
started reclaiming locks, and those locks will be lost.

We could change /etc/init.d/nfslock so it always modprobes lockd.ko
before starting rpc.statd.  However, if lockd.ko is ever unloaded
and reloaded, we are back at square one, since the NSM state is not
preserved across an unload/reload cycle.  This may happen frequently
on clients that use automounter.  A period of NFS inactivity causes
lockd.ko to be unloaded, and the kernel loses its NSM state setting.

Instead, let's use the fact that rpc.statd plants the local system's
NSM state in every SM_MON (and SM_UNMON) reply.  lockd performs a
synchronous SM_MON upcall to the local rpc.statd _before_ sending its
first NLM request to a new remote.  This would permit rpc.statd to
provide the current NSM state to lockd, even after lockd.ko had been
unloaded and reloaded.

Note that NLMPROC_LOCK arguments are constructed before the
nsm_monitor() call, so we have to rearrange argument construction very
slightly to make this all work out.

And, the kernel appears to treat NSM state as a u32 (see struct
nlm_args and nsm_res).  Make nsm_local_state a u32 as well, to ensure
we don't get bogus comparison results.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-06-17 18:02:10 -07:00
Chuck Lever 78851e1aa4 NLM: Shrink the IPv4-only version of nlm_cmp_addr()
Clean up/micro-optimatization:  Make the AF_INET-only version of
nlm_cmp_addr() smaller.  This matches the style of
nlm_privileged_requester(), and makes the AF_INET-only version of
nlm_cmp_addr() nearly the same size as it was before IPv6 support.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-10 20:33:19 -04:00
Chuck Lever 57ef692588 NLM: Rewrite IPv4 privileged requester's check
Clean up.

For consistency, rewrite the IPv4 check to match the same style as the
new IPv6 check.  Note that ipv4_is_loopback() is somewhat broader in
its interpretation of what is a loopback address than simply
"127.0.0.1".

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:56 -05:00
Chuck Lever d1208f7073 NLM: nlm_privileged_requester() doesn't recognize mapped loopback address
Commit b85e4676 added the nlm_privileged_requester() helper to check
whether an RPC request was sent from a local privileged caller.  It
recognizes IPv4 privileged callers (from "127.0.0.1"), and IPv6
privileged callers (from "::1").

However, IPV6_ADDR_LOOPBACK is not set for the mapped IPv4 loopback
address (::ffff:7f00:0001), so the test breaks when the kernel's RPC
service is IPv6-enabled but user space is calling via the IPv4
loopback address.  This is actually the most common case for IPv6-
enabled RPC services on Linux.

Rewrite the IPv6 check to handle the mapped IPv4 loopback address as
well as a normal IPv6 loopback address.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:56 -05:00
Chuck Lever 8529bc51d3 NSM: Move nsm_addr() to fs/lockd/mon.c
Clean up: nsm_addr_in() is no longer used, and nsm_addr() is used only in
fs/lockd/mon.c, so move it there.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:55 -05:00
Chuck Lever e6765b8397 NSM: Remove include/linux/lockd/sm_inter.h
Clean up: The include/linux/lockd/sm_inter.h header is nearly empty
now.  Remove it.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:55 -05:00
Chuck Lever 92fd91b998 NLM: Remove "create" argument from nsm_find()
Clean up: nsm_find() now has only one caller, and that caller
unconditionally sets the @create argument. Thus the @create
argument is no longer needed.

Since nsm_find() now has a more specific purpose, pick a more
appropriate name for it.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:54 -05:00
Chuck Lever 3420a8c435 NSM: Add nsm_lookup() function
Introduce a new API to fs/lockd/mon.c that allows nlm_host_rebooted()
to lookup up nsm_handles via the contents of an nlm_reboot struct.

The new function is equivalent to calling nsm_find() with @create set
to zero, but it takes a struct nlm_reboot instead of separate
arguments.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:54 -05:00
Chuck Lever 7fefc9cb9d NLM: Change nlm_host_rebooted() to take a single nlm_reboot argument
Pass the nlm_reboot data structure directly from the NLMPROC_SM_NOTIFY
XDR decoders to nlm_host_rebooted().  This eliminates some packing and
unpacking of the NLMPROC_SM_NOTIFY results, and prepares for passing
these results, including the "priv" cookie, directly to a lookup
routine in fs/lockd/mon.c.

This patch changes code organization but should not cause any
behavioral change.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:54 -05:00
Chuck Lever 7e44d3bea2 NSM: Generate NSMPROC_MON's "priv" argument when nsm_handle is created
Introduce a new data type, used by both the in-kernel NLM and NSM
implementations, that is used to manage the opaque "priv" argument
for the NSMPROC_MON and NLMPROC_SM_NOTIFY calls.

Construct the "priv" cookie when the nsm_handle is created.

The nsm_init_private() function may look a little strange, but it is
roughly equivalent to how the XDR encoder formed the "priv" argument.
It's going to go away soon.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:53 -05:00
Chuck Lever 67c6d107a6 NSM: Move nsm_find() to fs/lockd/mon.c
The nsm_find() function sets up fresh nsm_handle entries.  This is
where we will store the "priv" cookie used to lookup nsm_handles during
reboot recovery.  The cookie will be constructed when nsm_find()
creates a new nsm_handle.

As much as possible, I would like to keep everything that handles a
"priv" cookie in fs/lockd/mon.c so that all the smarts are in one
source file.  That organization should make it pretty simple to see how
all this works.

To me, it makes more sense than the current arrangement to keep
nsm_find() with nsm_monitor() and nsm_unmonitor().

So, start reorganizing by moving nsm_find() into fs/lockd/mon.c.  The
nsm_release() function comes along too, since it shares the nsm_lock
global variable.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:53 -05:00
Chuck Lever 356c3eb466 NLM: Move the public declaration of nsm_unmonitor() to lockd.h
Clean up.

Make the nlm_host argument "const," and move the public declaration to
lockd.h.  Add a documenting comment.

Bruce observed that nsm_unmonitor()'s only caller doesn't care about
its return code, so make nsm_unmonitor() return void.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:52 -05:00
Chuck Lever c8c23c423d NSM: Release nsmhandle in nlm_destroy_host
The nsm_handle's reference count is bumped in nlm_lookup_host().  It
should be decremented in nlm_destroy_host() to make it easier to see
the balance of these two operations.

Move the nsm_release() call to fs/lockd/host.c.

The h_nsmhandle pointer is set in nlm_lookup_host(), and never cleared.
The nlm_destroy_host() function is never called for the same nlm_host
twice, so h_nsmhandle won't ever be NULL when nsm_unmonitor() is
called.

All references to the nlm_host are gone before it is freed.  We can
skip making h_nsmhandle NULL just before the nlm_host is deallocated.

It's also likely we can remove the h_nsmhandle NULL check in
nlmsvc_is_client() as well, but we can do that later when rearchitect-
ing the nlm_host cache.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:52 -05:00