Commit Graph

3372 Commits

Author SHA1 Message Date
Uwe Kleine-König 507aaeeef8 ARM: imx_v4_v5_defconfig: enable PWM driver
While there is no mainline board that makes use of the PWM still enable the
driver for it to increase compile test coverage.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-22 09:56:11 +08:00
Uwe Kleine-König 728e096dd7 ARM: imx_v6_v7_defconfig: continue compiling the pwm driver
After the pwm-imx driver was split into two drivers and the Kconfig symbol
changed accordingly, use the new name to continue being able to use the
PWM hardware.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-22 09:55:59 +08:00
Alexey Brodkin 3337d5cfe5 configs: get rid of obsolete CONFIG_ENABLE_WARN_DEPRECATED
This Kconfig option was removed during v4.19 development in commit
771c035372 ("deprecate the '__deprecated' attribute warnings entirely
and for good") so there's no point to keep it in defconfigs any longer.

FWIW defconfigs were patched with:
--------------------------->8----------------------
find . -name *_defconfig -exec sed -i '/CONFIG_ENABLE_WARN_DEPRECATED/d' {} \;
--------------------------->8----------------------

Link: http://lkml.kernel.org/r/20190128152434.41969-1-abrodkin@synopsys.com
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07 18:32:02 -08:00
Linus Torvalds 64b1b217f1 ARM: New SoC family support
Two new SoC families are added this time.
 
 Sugaya Taichi submitted support for the Milbeaut SoC family from
 Socionext and explains:
 
  "SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for
   computer vision. It also features advanced functionalities such as 360-degree,
   real-time spherical stitching with multi cameras, image stabilization for
   without mechanical gimbals, and rolling shutter correction. More detail is
   below:
   https://www.socionext.com/en/products/assp/milbeaut/SC2000.html"
 
 Interestingly, this one has a history dating back to older chips
 made by Socionext and previously Matsushita/Panasonic based on their
 own mn10300 CPU architecture that was removed from the kernel last year.
 
 Manivannan Sadhasivam adds support for another SoC family, this is the
 Bitmain BM1880 chip used in the Sophon Edge TPU developer board.
 The chip is intended for Deep Learning applications, and comes
 with dual-core Arm Cortex-A53 to run Linux as well as a RISC-V
 microcontroller core to control the tensor unit.
 For the moment, the TPU is not accessible in mainline Linux, so
 we treat it as a generic Arm SoC.
 More information is available at https://www.sophon.ai/
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcf9USAAoJEGCrR//JCVIn8M8P/1+wpy+9PZynYOqIZvTAR0Pr
 wqZD20FIjzbEMBpbSMWpOSxg+KbSuf+K1s+1lF6hAGry5UW8CVgZ7DMQ2DyBZfzN
 NEcJ1MfchN1AblpD4L76C7PzLR4ZbmNHmXaGX5KQ3ItXFX50TI+PBNdlRMho1y2P
 NGD8SLD1K+erfGyx6CHY+Wf6el25I7tP739HZGvZfMR1SDSKp73fwbjmBBg8vg7/
 2kIwjU7msgtIh4xAgNnZ7+uNUovi04ibDpQnOMta4Urdc9WBJPVQrTmrNJU0loJr
 bffhrrK4adZgp40gtjajCqPR6F96shyZ2G7nYxe53FGE4whSsMCZuGb5aXJ9OtZq
 ez0w3Vy16+2uLLA55xVGgcsOv/4pwXnxuVnfw4D5lonU8Q5bbh5pBTVnvV6lFOea
 IOLaEcfwBCLKMAkZ//eHn9PIGg3RBko4MZniJwb+WLbHXWR+MriQ4+Pb+cvugOAo
 ky4I9iU/XAmUfJxVC1ShHZrzgz2kEoZXCsX0yqXR1eG4o1Ztbftrs4UOyvTxeqxl
 lvLXg3b0SDA5QBwQHUxL0G9HTqm4LdMs3lg98kI05gWofz6Bmk1aEi7U4uguhGKf
 KafuUZ6snVF5KGJAI745Q4IkLKelxjBymLEi+FVKk6y0KAejQXuSMpgXwC1SnIN3
 M69uqcDP+ICqCgDbwWCx
 =HQS8
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM new SoC family support from Arnd Bergmann:
 "Two new SoC families are added this time.

  Sugaya Taichi submitted support for the Milbeaut SoC family from
  Socionext and explains:

    "SC2000 is a SoC of the Milbeaut series. equipped with a DSP
     optimized for computer vision. It also features advanced
     functionalities such as 360-degree, real-time spherical stitching
     with multi cameras, image stabilization for without mechanical
     gimbals, and rolling shutter correction. More detail is below:

       https://www.socionext.com/en/products/assp/milbeaut/SC2000.html"

  Interestingly, this one has a history dating back to older chips made
  by Socionext and previously Matsushita/Panasonic based on their own
  mn10300 CPU architecture that was removed from the kernel last year.

  Manivannan Sadhasivam adds support for another SoC family, this is the
  Bitmain BM1880 chip used in the Sophon Edge TPU developer board.

  The chip is intended for Deep Learning applications, and comes with
  dual-core Arm Cortex-A53 to run Linux as well as a RISC-V
  microcontroller core to control the tensor unit. For the moment, the
  TPU is not accessible in mainline Linux, so we treat it as a generic
  Arm SoC.

  More information is available at

       https://www.sophon.ai/"

* tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: multi_v7_defconfig: add ARCH_MILBEAUT and ARCH_MILBEAUT_M10V
  ARM: configs: Add Milbeaut M10V defconfig
  ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board
  clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs
  dt-bindings: timer: Add Milbeaut M10V timer description
  ARM: milbeaut: Add basic support for Milbeaut m10v SoC
  dt-bindings: Add documentation for Milbeaut SoCs
  dt-bindings: arm: Add SMP enable-method for Milbeaut
  dt-bindings: sram: milbeaut: Add binding for Milbeaut smp-sram
  MAINTAINERS: Add entry for Bitmain SoC platform
  arm64: dts: bitmain: Add Sophon Egde board support
  arm64: dts: bitmain: Add BM1880 SoC support
  arm64: Add ARCH_BITMAIN platform
  dt-bindings: arm: Document Bitmain BM1880 SoC
2019-03-06 10:15:42 -08:00
Linus Torvalds fb686ad25b ARM: SoC defconfig updates for 5.1
We regenerated the defconfig files for samsung, shmobile, lpc18xx,
 lpc32xx, omap2, and nhk8815.
 
 Lots of additional drivers added on samsung and nhk8815,
 as well as the new pl110 driver on all machines that have it.
 
 The remaining changes are mostly to enable newly added drivers,
 and in case of imx8mq together with the SoC getting merged.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcfoyyAAoJEGCrR//JCVIne4QP/RDU/fpL8br1Tqk3/dGoWdZd
 66//chb/N9a5zQN6wGrtSe1nPYluQUz6M5wze2X/ta8QwWL3na4ILgzLFx9pvH/B
 Wnen9dh0UwbmjQXzcuiL1hOZRlDD9ZwBcNFyYHb/szrnhI/ZnIpEHeWtSXyaHK0W
 tCHzFkxOk1X+OAYH2LOneZJPIP0PeD+aJkAO+lJCMTCpH0Llm2dDILXygSUFv3b6
 l+qst6VVIAwJiNrCMp3zRnrBRX3PobpxAbPOEWG53RDqHDbAx3noG7m/WtGxuOrf
 GgdWcClENjGkP+eQZzFJR1KOwCz5mfoAVW5pv3a6jcQwSxybbs/5ke4vDQaPVhz0
 tSmnoQ+QdpFJ26mnm+un1GdCrAchOe6nznVJWH7dpX3wRNtQscrX9dsQOTMqSOZC
 zQutsu63EYurj5XegnEgKoWqShlO3VUJDTMKs+AUDEmkKomfNsKGK2PMhpqTiCsR
 /VvjXEWvaO2vQS9yaa+//TdxLDgsEyPYJpPXaBr5qkg/Hm7H+yB28Zi7B50I7+Eq
 DhJxg1O3TnNNKuMQr8JlMN0lYoUh1U2NBYmcL+0jthA/CHF9Lf37msk3f02xA55I
 n/EQHi92ZknjKKpZhtKdXk8BswidCAQoS+9/NqdMZ9zSRBoc09IC5WaoXMeaYIqs
 Htxdm2cM0hfKjTUOylA7
 =YWHu
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "We regenerated the defconfig files for samsung, shmobile, lpc18xx,
  lpc32xx, omap2, and nhk8815.

  Lots of additional drivers added on samsung and nhk8815, as well as
  the new pl110 driver on all machines that have it.

  The remaining changes are mostly to enable newly added drivers, and in
  case of imx8mq together with the SoC getting merged"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
  ARM: spear3xx_defconfig: Activate PL111 DRM driver
  ARM: nhk8815_defconfig: Add new options
  ARM: nhk8815_defconfig: Update defconfig
  ARM: pxa: remove CONFIG_SND_PXA2XX_AC97 in pxa_defconfig
  ARM: defconfig: integrator: Switch to DRM
  arm64: defconfig: Add IMX2+ watchdog
  arm64: defconfig: Enable PFUZE100 regulator
  arm64: defconfig: enable NXP FlexSPI driver
  arm64: defconfig: Add i.MX8MQ boot necessary configs
  arm64: defconfig: add imx8qxp support
  arm64: defconfig: add i.MX system controller RTC support
  arm64: defconfig: Enable Tegra TCU
  arm64: defconfig: Enable MAX8973 regulator
  ARM: socfpga_defconfig: enable BLK_DEV_LOOP config option
  ARM: defconfig: lpc32xx: enable DRM simple panel driver
  ARM: defconfig: lpc32xx: enable fixed voltage regulator support
  arm64: defconfig: Enable SUN6I Camera sensor interface
  arm64: defconfig: Enable I2C_GPIO
  ARM: omap2plus_defconfig: Update for moved options
  ARM: omap2plus_defconfig: Update for dropped options
  ...
2019-03-06 10:09:50 -08:00
Sugaya Taichi 2781204594 ARM: multi_v7_defconfig: add ARCH_MILBEAUT and ARCH_MILBEAUT_M10V
Add and enable the Milbeaut M10V architecture. These configs select those
of the clock, timer and serial driver for M10V.

Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-03-01 15:18:54 +01:00
Sugaya Taichi 4d0eacb02b ARM: configs: Add Milbeaut M10V defconfig
This patch adds the minimal defconfig for the Milbeaut M10V.

Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-03-01 15:18:54 +01:00
Linus Walleij 31b0067e8d ARM: spear3xx_defconfig: Activate PL111 DRM driver
This disables the old FBDEV driver and enables the PL111
DRM driver on the SPEAr3xx.

There are some device trees in the kernel that switches
the DT node for the PL110 to "okay" but none of these
have any display defined, so we can safely switch to this
driver before we get any users starting to define
displays. Let them do it on top of the new driver
infrastructure instead.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-03-01 15:09:21 +01:00
Linus Walleij 00c15bb031 ARM: nhk8815_defconfig: Add new options
This adds some new driver options to the Nomadik NHK8815 defconfig:
- Activate IIO driver
- Enable CMA for coherent graphics allocations
- Activate DRM framebuffer driver for PL111
- Activate DRM panel driver for TPO TPG110
- Activate SPI GPIO driver (talks to the display)
- Activate STMPE PWM driver (used for display backlight)
- Activate PWM backlight
- Activate STw481x driver (PMIC)

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-03-01 15:07:23 +01:00
Linus Walleij 2be5274609 ARM: nhk8815_defconfig: Update defconfig
This updates the NHK8815 defconfig to reflect the recent
structural changes in Kconfigs all over the kernel:

- PREEMPT option was moved around
- MODULES options were moved around
- MTD_NAND options were moved around
- INPUT_MOUSEDEV doesn't have to be explicitly unselected
  anymore (not on by default)
- DEBUG_GPIO should really not be in any default config
- MMC_BLOCK_BOUNCE is gone from Kconfig
- CRYPTO options were moved around

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-03-01 15:07:10 +01:00
Arnd Bergmann f1685af78c ARM: pxa: remove CONFIG_SND_PXA2XX_AC97 in pxa_defconfig
The CONFIG_SND_PXA2XX_AC97 driver is for the old AC97 bus implementation,
and conflicts with all the new-style AC97 drivers after the conversion,
so the drivers we want all get turned off.

Not disabling the symbol however does the right thing, and we get
the drivers that are selectively enabled here.

Fixes: 25540f68c8 ("ASoC: pxa: change ac97 dependencies")
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-03-01 15:02:26 +01:00
Linus Walleij 1a4aacdeb5 ARM: defconfig: integrator: Switch to DRM
This switches the ARM Integrator to use the new PL11x DRM
driver. We need CMA enabled to get coherent allocations
at all times. The dumb VGA DAC bridge is needed for
the VGA output on the reference designs, and backlight
is needed when using an external display.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-22 22:08:22 +01:00
Arnd Bergmann e9b4c1cf65 Samsung defconfig changes for v5.1
Enable more drivers in s5pv210 defconfig for Aries family of mobile
 devices (e.g. Samsung Galaxy S).
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAlxUl8gQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD18OtD/9i7gE27i3Rb5DZXDIf7JY0gnpYR0WGE+Bw
 boWRS8N/hADRAGWPVzy6Hu9fJZjkaOAYZbnHwtcznB+NeQQd3gWyQUpjCHOwFtKN
 cQsT3680E9qI3VmoBEpVgzGGrOlLOxodRZkE3rNlL5pcFK3SPZkq43noSN1IwYLf
 bHRP155awQ9VXtWQLwuOqb6rhLz38Mhm5TfzibY6D8pFS+UJBFWiMdX45W5jfRBv
 xImKnWFQQo3HVyiayWJOQUein2BXfxCJhDpqUh7NL4C7NhbqodCjuPUszopxWK71
 dnZGpupjLY0muTGWrgDZEwkUwYB33hqUoNtWrjj3KEI7SlVBkDw5mN6WO/POSoE5
 MfcWdL8Io9voOlzWNzoNXUQOU7ep4fUZS7aRfXpnZWnING6aoNAnCXLs6wiEmoCX
 elMra2aaN7M2I73wS3eIKiWtr5lbBnBnivCjeMMxdIeRviz8TLVk11OEl97w1soP
 DGKBvLcjOi7q3pejCSDVEj07NIMUZSHm1z88SKpVOfaykBbOdRbkY8KNschr5dUJ
 F9UdpuhZTSBFLWhctjU37Wb1eMJfZtewG1bfmbY+XLgP3297Q+zHFrmcpa9QL1eR
 PmLeURK8ahJpSFjrukHjn7KyaM10Bl0OT3nSPfhZYh6sowRAeroCU2uvpnp3/Ziu
 NrXUhxNWsw==
 =78iS
 -----END PGP SIGNATURE-----

Merge tag 'samsung-defconfig-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig

Samsung defconfig changes for v5.1

Enable more drivers in s5pv210 defconfig for Aries family of mobile
devices (e.g. Samsung Galaxy S).

* tag 'samsung-defconfig-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: s5pv210_defconfig: Enable cpufreq
  ARM: s5pv210_defconfig: Enable more drivers present on Samsung Aries
  ARM: s5pv210_defconfig: Run make savedefconfig

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15 16:59:20 +01:00
Arnd Bergmann 5e26374161 This pull request contains Broadcom ARM-based SoCs defconfig file
updates for 5.1, please pull the following:
 
 - Stefan enables the MMAL-based V4L2 camera driver for the Raspberry Pi
   devices
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAlxVzrwACgkQh9CWnEQH
 BwRa3Q/9H9IeE0Q5KwQ37zMiC/s25z8VByAQ9qchJB0kjGXs8vIQAeMwi8x08zvc
 gyq+EX7y3Q+U7yEkqOTMFT/rxP/wLnsIX6EBGodcFr4ZZVWpIX9Sm9i8y4+inP+S
 doxXyrFspdXZMv3VzZPayzEHZRnaP7cdeNhbMwrEgirQjIR+/zdY/0THjswUp/Vs
 nb95mj4hZUOQmK4Es9PqxiNavwZ/yI0CxzAzd9v2s3IKLvb0+D89rlQ46tPwyirL
 wSzvReyGl0Am15IICPFKv39wEBwUU2DlBHa8S5LvkDXMa/ydQvdQ6t2Vh1FeIjNJ
 WRtev+waQskTeeoxOktJIpZbkEQqJPCxWdvYo1QmDHFVk84e98/YwGhdZcDe/LtB
 XBa/GpyCEgWmX0LaRuDRuJNGSnz5qkGG+Fi39m50SAotvWMZFxBMp+2pko8XaxPf
 UnDQLry4AVsvm+e8lN+HZkwbFT4tmvFNCvFyV7C28Os1efGP3d16ccerNfi029GX
 2lb2CQzQ35QjkIVEAyqs7SpT+RkZxxRWdL5eryhq1/5ZKS8gbOcY/EQ0phKo4/QW
 VaD/UnbQJLkc32vADta+wSnu/zuk4SyZkuSivYbJQepcXJGA5VIliLFxyPoMCem2
 4AkxblWtzlZIzSEHsbC9iBWyKKP+5VeF2sYd0uo1fj+p2UZBPGg=
 =uhZ9
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-5.1/defconfig' of https://github.com/Broadcom/stblinux into arm/defconfig

This pull request contains Broadcom ARM-based SoCs defconfig file
updates for 5.1, please pull the following:

- Stefan enables the MMAL-based V4L2 camera driver for the Raspberry Pi
  devices

* tag 'arm-soc/for-5.1/defconfig' of https://github.com/Broadcom/stblinux:
  ARM: bcm2835_defconfig: Enable BCM2835 MMAL-based V4L2 camera driver

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15 16:58:21 +01:00
Arnd Bergmann f13c82e2e7 ARM: lpc32xx: defconfig updates for v5.1
Here are the changes for ARM NXP LPC32xx and ARM NXP LPC18xx/LPC43xx
 defconfig files:
 * LPC18xx/LPC43xx and LPC32xx defconfig files got updates to match
   savedefconfig,
 * PL11x LCD controller driver on both LPC18xx/LPC43xx and LPC32xx
   has been switched from fbdev to DRM one,
 * drivers of GPIO controllers not found on LPC32xx boards are disabled,
 * LPC32xx gets enabled additional sane debugging options: panic on oops,
   sysrq, dynamic debug, timestamps in kernel log buffer and built GDB
   scripts,
 * LPC32xx gets enabled NFSv4 support,
 * LPC32xx gets enabled a number of used drivers: DRM simple panel,
   fixed voltage regulator and generic SRAM drivers,
 * Option to have a serial console on HS UART on LPC32xx is enabled.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEETKMJMWSwX7CFTVIOqj3i2jwlOWUFAlxXSwEACgkQqj3i2jwl
 OWVKAw//QSv3Bl/CoPHJfYJwgAfslN+nqQg9TXC9ygEIS4t0oeWd/W7MZeLUfRdj
 RyRWAmtJ3eoeNsz1lnhSaAd2sgqJOlL36zDq5k+pLnFPXp7jKlpU7wI4xq/T4HuY
 auyqywG9VfjIrcNjNcoGMDe+cJNTfbcr+epF45MLQLu+4JxdS2A7IKDibaC/Mq1J
 JDHslte/lf3/ShlDC5cNU3EMmV9gdB4NmFixWGTRXxJzE9U63r+7wtwy+dV/e8KN
 hCgybm1Lk039Zjd0pfB6S8N8CLeuhtcAAcJSWuFrsUXQbzhOy7b5hx+qfTyBd0bW
 RnyajbqD9KTV1YYHFL3sJoK3HnvUO4Vk9/QzJarAFop7xoY/pO07aVnGGVc3UsmH
 uHW0527XVXyV9yxymXB4yvLcnwzcUj8kww6kWFiaAJJQl9p9JPB2W5Lnqayqy2Br
 A7YqdG34/aeMPPe93CFTQV+MKRiSriYZ2gVpgQi1tD3kNji6Xh+VEb8EUcTPnYc8
 z0edolwNNNw/dvyeyoOl6HSTHf6Nykivfxs+WJwKIXFZRbtxlRa0zPJjv1ua8BR/
 Per/EhyFpQWM4YioiaVoI+YZk3ZoLOSBdRnuW+PvAEx8ET4jU+fP1PxHlsbv/1fD
 w/plHUDWbNTvZ9yn6zTBmkfFGrvHNInbpJuOmfTJ+EE+Pvk/YUE=
 =nR4K
 -----END PGP SIGNATURE-----

Merge tag 'lpc32xx-defconfig-for-5.1' of https://github.com/vzapolskiy/linux-lpc32xx into arm/defconfig

ARM: lpc32xx: defconfig updates for v5.1

Here are the changes for ARM NXP LPC32xx and ARM NXP LPC18xx/LPC43xx
defconfig files:
* LPC18xx/LPC43xx and LPC32xx defconfig files got updates to match
  savedefconfig,
* PL11x LCD controller driver on both LPC18xx/LPC43xx and LPC32xx
  has been switched from fbdev to DRM one,
* drivers of GPIO controllers not found on LPC32xx boards are disabled,
* LPC32xx gets enabled additional sane debugging options: panic on oops,
  sysrq, dynamic debug, timestamps in kernel log buffer and built GDB
  scripts,
* LPC32xx gets enabled NFSv4 support,
* LPC32xx gets enabled a number of used drivers: DRM simple panel,
  fixed voltage regulator and generic SRAM drivers,
* Option to have a serial console on HS UART on LPC32xx is enabled.

* tag 'lpc32xx-defconfig-for-5.1' of https://github.com/vzapolskiy/linux-lpc32xx:
  ARM: defconfig: lpc32xx: enable DRM simple panel driver
  ARM: defconfig: lpc32xx: enable fixed voltage regulator support
  ARM: defconfig: lpc32xx: disable superfluous GPIO controllers
  ARM: defconfig: lpc32xx: enable generic SRAM driver
  ARM: defconfig: lpc32xx: enable serial console on HS UART
  ARM: defconfig: lpc32xx: enable panic on oops option
  ARM: defconfig: lpc32xx: enable build options for basic debugging
  ARM: defconfig: lpc32xx: enable NFSv4 support
  ARM: defconfig: Switch LPC32xx to use PL11x DRM driver
  ARM: defconfig: Update LPC32xx defconfig
  ARM: defconfig: Switch LPC18xx to use PL11x DRM driver
  ARM: defconfig: Update LPC18xx defconfig
2019-02-15 16:53:33 +01:00
Arnd Bergmann 213721c7c6 Merge branch 'socfpga_for_next_v5.1_defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/defconfig
* 'socfpga_for_next_v5.1_defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: socfpga_defconfig: enable BLK_DEV_LOOP config option

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15 16:52:42 +01:00
Arnd Bergmann 758cf939df Renesas ARM Based SoC Defconfig Updates for v5.1
shmobile and multi_v7 defconfig
 * Enable support for recently upstreamed RZ/A2 (r7s9210) SoC
 * Enable NXP pcf85363 RTC which is used on RZ/G1C (r8a77470) based iWave SBC
 
 shmobile defconfig
 * Refresh for changes present in v5.0-rc1
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlxdV5wACgkQ189kaWo3
 T75X1Q/7BMrKJisvrPEcCcfWFJd3ce6ojtaSa7kVAAgoaOpgylZGtC9inWW/XbPS
 aYitIE2aT3rRO1+xOV31SsMW0RFELyQkIvJTzYyVjC5AdeBqIt5fHqJqXq+k0jF9
 MbvxHtfxxTpKp0vIvhBnONIqMlj4N4BRHyhMtLaDKoePGE3NdYX9y0122QsFOhpY
 3txSuKx1ZX6awJEz1XXTxJj4Kun37g77LBGsfE3aGjEsTKANYevRyCxOK4+EF9ks
 sSAo3bPTqne3KmUE+vPqMSUDXal9u1RYoqk1UL0ke4ceHv967xjyQzwZCz4FY/Vu
 SJmWs3dPxy+WU8PV5GLj9oBw9Yp5jYOFFMGJu74TinHcGw3xFEc6Dwp+H295u/Jm
 UizpNKWXKqRq4cIs1y4kb425lvygTP3sfuYKKaKsnTF8vlj6s6rvvN5B97epDBrK
 SypENZloY8C+laAux1n/hgH96G/8PHpXxvRKBc5eUdqlb3f7+GqPwGJNsSAaOhsX
 3rw4wChWJF27z1WQyWPvlVHl68TibzqSWegAOfq4xLAiwtvkvn49nJq4OgMrJUkP
 uTWZHZQC4hJ6NPnGQ7myKcSJcSa3nd5nTIqzFUjHUrRDa1mzAVOW2cdpvXp1ROMv
 7fqNUgxjOkBPEctwu+DbTyu1sGoUD+IKJxBOeLMm0S6bAXQ9udI=
 =8/bA
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm-defconfig-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/defconfig

Renesas ARM Based SoC Defconfig Updates for v5.1

shmobile and multi_v7 defconfig
* Enable support for recently upstreamed RZ/A2 (r7s9210) SoC
* Enable NXP pcf85363 RTC which is used on RZ/G1C (r8a77470) based iWave SBC

shmobile defconfig
* Refresh for changes present in v5.0-rc1

* tag 'renesas-arm-defconfig-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: multi_v7_defconfig: Enable support for RZ/A2
  ARM: shmobile: defconfig: Enable support for RZ/A2
  ARM: shmobile: defconfig: Refresh for v5.0-rc1
  ARM: multi_v7_defconfig: Enable NXP pcf85363 rtc
  ARM: shmobile: Enable NXP pcf85363 rtc in shmobile_defconfig

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15 16:49:47 +01:00
Arnd Bergmann 0e58c23b52 Defconfig changes for omaps
Drop PROVE_LOCKING as it should not be enabled in the defconfig. It
 causes quite a bit overhead as noted in the patch description.
 
 Then let's update omap2plus_defconfig for dropped options and moved
 options. That way makesavedefconfig can actually be used to generate
 patches against omap2plus_defconfig.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlxlrd0RHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXOMQQ//dnvmQ0xiVFFB/I4hfgcI2kHxk4J3nIoO
 zPGPb2ygUN6CeFLVSVUv3vytOR4FkvKZU/Z6hyxJTv0cain1yxZ6IfTRjNwKdDxF
 UA35AvB992WwBqbu7UxUUSI80dAY9CAqY7Cq0niaFbpQ7giIbL+qQtWLoVHFJi76
 V3DQa45QXgNGURJ7bMYxjzb2/mH9cAx7UfOIuePNdACGhf9t/PHYIjJnPA9PLurq
 Umgv00FraiUbSQhVF0Pfdd5ljPrpV0pf3DWrsOAnPuPJo2wmLzrfyLi014JSoifH
 DGyi47uyq2XXwdHMtfPU0YiRGhP0O9md5nGcGIjKNiAeCISmYgqYtXsTsAah4wDY
 2RQajX0y6KKuQobrRewoK82QGgqcJcj3Xd61+luf7wh3w9nTpZ/HrS4pqVC/cvos
 S/5Wsj7yT/k+g4LOINzhaBaLVlKhW0KPQtiJpexSjgfLoTSQ32H1aCvpEUpwKcYQ
 nUZX/bgKhNmFLeH7V0MnTcnuR2cWcpyK1yO6HyjfxEA3cEbZkrpBVoGd9xOtqDik
 miUN54C4vDdidjq20Y+h7ZYvWchBwLbEVr98kaBZvDeBNQpL16+vdx1qLufW/j8F
 B7gSJJZNYJd4riRF8R7DSnx1eqDsmqedXVmjGGX14QdpP+5BI//DaGfmY3cQN0eE
 79Tc2xtnWmY=
 =Cia+
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v5.1/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig

Defconfig changes for omaps

Drop PROVE_LOCKING as it should not be enabled in the defconfig. It
causes quite a bit overhead as noted in the patch description.

Then let's update omap2plus_defconfig for dropped options and moved
options. That way makesavedefconfig can actually be used to generate
patches against omap2plus_defconfig.

* tag 'omap-for-v5.1/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: omap2plus_defconfig: Update for moved options
  ARM: omap2plus_defconfig: Update for dropped options
  ARM: omap2plus_defconfig: remove PROVE_LOCKING from defconfig

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15 16:46:53 +01:00
Dinh Nguyen 594f1e8a24 ARM: socfpga_defconfig: enable BLK_DEV_LOOP config option
Add CONFIG_BLK_DEV_LOOP and clean up socfpga_defconfig by make
savedefconfig.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-02-04 09:30:34 -06:00
Vladimir Zapolskiy 25dc2e0bd2 ARM: defconfig: lpc32xx: enable DRM simple panel driver
Phytec phyCORE-LPC3250 board is equipped with a Sharp LQ035Q7DB03
3.5" QVGA TFT panel, enable simple panel device driver to get it
supported in the kernel image by default.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-02-03 21:25:42 +02:00
Vladimir Zapolskiy daae508779 ARM: defconfig: lpc32xx: enable fixed voltage regulator support
Fixed voltage regulators are found on Phytec phyCORE-LPC3250 board,
enable the correspondent device driver by default.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-02-03 21:25:32 +02:00
Florian Fainelli 6e2111e72e This pull request enables the V4L2 camera driver on the Pi1 defconfig.
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE/JuuFDWp9/ZkuCBXtdYpNtH8nugFAlv9sQkACgkQtdYpNtH8
 nugsMhAAq9i+cB6FMeDfVFF98KEub2q776NP0w/IN1zpvdrn1/wkrmpVPqxa8EWX
 wpGuZiEMpiOHiOGclHfb2/VtJoMfEKr4rsnegvV5TACMGk3z1RyYCgcPYvSxqtJU
 QkzY5kJTa46OPhALhv1EG6ZME6CFCzwGQPBrrM/2o1gsAj8XSw7M/FqauvKrl7BQ
 TfcZk+hs3R5vk9ZK6+1TnJa+8L3YAqWXq4i0ycSr/3m4NAQnGE+9nEpU1GGZlr0d
 6xy8uhVYEf8s97ToFts+Ql36635YbDx7jtIyf4F43gPpbIuskEC4Sm6/F18wR8uy
 sFaf4V7WO843q02cXlRqctIETDBw6QVU0G+zJgXAdWlMrwKzYLajIHThJUFNecTC
 viW62REmsqPnvelGH6fwovzr611+HVq/R0/p6cpczK+dqZ8E7A8S0RDTNCcvR/wM
 QKBENoo9F6mkIepju9Hf+pW4pdxuUlcKQT38PWmUTkdGV8hsgKOrlBDopOoYwN8H
 E6UMbAYMSdkBvjuWU8knAnny44eRMn4Ouiwga3/VK3VueTx4JE4Fs48rlRnrb0Nu
 OOOJvirOiebdsR+tN/VU/YJH0k2s7yQ8I3kpmq7XsOLj3adq0YNVysQwz25JsL3e
 HHonm5kE5Mx/mLHrubwc1uP/K70+0o9IHafLFsht0lDruR0sHB4=
 =CjGJ
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAlxT02MACgkQh9CWnEQH
 BwTbfw/9F4EAfKNTK1MyTqFlkDW6MiKA1j1P+1V3CcvkqcgG5laGXRNnlf0ZSrZ+
 bvr6rPY0yPNtaGkVVl0rSNDeor+b1s6DkN3ZSZ1kaUitVkda6kqNAm75FMf3gOYy
 QJglxiPKwjKElKFC6VWkaeia7JZA9cBLOr2Ff8oPxgXl6OSrWGUspAhuYWAXqvmk
 eepEkXp+SOpMqwif0KBwIjQ1CEqxROrFF0urypltRR0wJF8VYdwLHq4m0DzguFd6
 lLZKMyjZgCBYD2xXTMPX4DnmGe30cSkk72+T8m+/tnFxnpps7i83PcwZi3RSogyM
 m/jlcmVxDTlp6ufSB+7890nGKO1kL/AtUNgjM90SwEZv/14xzyepbv7GC/Jl6958
 qyTmCE+As/mG8MTv3WbRUY6AZe2eo2Swv/wWsR2J/lMlNzkfT+BiNYWKoJXw3BL6
 zpDOmq6tKQZpIpQLZHVNo7l9E3ZH8s0buzzTVu5GWo4QA/lDV4+e90VngWUEkJw0
 Qx7mX0bJHCD4s6biGZShB1uwnV7/hApVV131AvFJ4NwzUSSx5RXhJCoEy5noy7qK
 rTD0/j034FnlSoiE409AfiWkEr5dgvLp3qDf4ytsQ+w3Nym1gguoqHs9CD6UJYXZ
 DYB33wry4jHCHwP+GPKMAhKBlhzHZN/SM41QK3lYaj49UsgIC+g=
 =qrUG
 -----END PGP SIGNATURE-----

Merge tag 'tags/bcm2835-defconfig-next-2018-11-27' into defconfig/next

This pull request enables the V4L2 camera driver on the Pi1 defconfig.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-01-31 21:04:22 -08:00
Tony Lindgren a8220ae7e7 ARM: omap2plus_defconfig: Update for moved options
These options have just moved around, let's update with make
savedefconfig to make patching the file easier.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-01-31 10:54:06 -08:00
Tony Lindgren a7bfb67732 ARM: omap2plus_defconfig: Update for dropped options
These are all now selected by default so we can drop them
from omap2plus_defconfig.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-01-31 10:54:05 -08:00
Lukasz Luba 1531f1b24d ARM: omap2plus_defconfig: remove PROVE_LOCKING from defconfig
PROVE_LOCKING enables LOCKDEP, which causes big overhead on cache and
bus transactions.

On some ARM big.LITTLE architecutres (Exynos 5433) the overhead is really big.
The overhead can be measures using hackbench which will speed up
by x3 times (11sec -> 3.4sec).
When you check transaction on cache or buses, the results are way higher
than normal for the same hackbench test:
L1d cache invalidations: 26mln vs 4mln
L2u cache invalidations: 42mln vs 12mln
bus cyc/access: 30cyc/access vs. 20cyc/access
context switch is x3 times cheaper

Enable this option only when you have some locking issue to investigate.

Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-01-31 10:54:05 -08:00
Ard Biesheuvel 34332ef736 ARM: multi_v7_defconfig: enable GCC plugin support and structleak plugin
Enable the base GCC plugin support symbol CONFIG_GCC_PLUGINS for
multi_v7_defconfig so that builds hosted on systems that have a
supported version of GCC along with the prerequisite headers will
allow GCC plugins to be used during the build. At the moment, this
will also enable the ARM per-task stack protector plugin, since
all its remaining Kconfig dependencies are fulfilled by default.

At the same time, enable the structleak plugin. This plugin ensures
that local struct type variables are fully initialized, preventing
inadvertent leaks of kernel state if such variables are shared with
userland. This is a reasonable transformation to apply by default,
since it does not adversely affect performance, and does not affect
GCC compiler diagnostics regarding the use of uninitialized local
variables.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-30 22:42:08 +01:00
Linus Walleij 0e150419fd ARM: defconfig: Enable PL11x DRM driver on multi_v7
This switches the ARMv7 defconfig away from the old
fbdev driver to the new DRM driver. All machines are
now supported by the new driver.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-30 22:40:27 +01:00
Linus Walleij a785670433 ARM: defconfig: axm55xx: Drop PL11x graphics driver
The defconfig for the AXM55xx includes the ARM CLCD
(PL11x) PrimeCell framebuffer driver, but the device tree
for this platform does not include this hardware, nor do I
find it likely that this chip has graphics.

Drop these config items.

Cc: John Logan <john.logan@intel.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-30 22:38:56 +01:00
Vladimir Zapolskiy ab5d06faff ARM: defconfig: lpc32xx: disable superfluous GPIO controllers
The change disables a list of GPIO controllers, which to the best
knowledge are not found on any supported NXP LPC32xx powered board.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-01-26 00:06:26 +02:00
Vladimir Zapolskiy 5bd7f4b537 ARM: defconfig: lpc32xx: enable generic SRAM driver
NXP LPC32xx SoCs contain an IRAM area, which is supported by
the generic MMIO SRAM driver, enable the driver to be built
by default.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-01-26 00:06:26 +02:00
Vladimir Zapolskiy 74dd4017c7 ARM: defconfig: lpc32xx: enable serial console on HS UART
It is possible to configure NXP LPC32xx powered boards to have
serial consoles on HS UARTs, enable this option by default.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-01-26 00:06:26 +02:00
Vladimir Zapolskiy d9bed635a0 ARM: defconfig: lpc32xx: enable panic on oops option
Panic on oops option enabled by by default makes great sense both
for debugging and production.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-01-26 00:06:26 +02:00
Vladimir Zapolskiy 742fa75dcd ARM: defconfig: lpc32xx: enable build options for basic debugging
To make a default built kernel image more advanced include support
of sysrq, dynamic debug, GDB scripts and printed timestamps in
kernel log buffer by default.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-01-26 00:06:26 +02:00
Vladimir Zapolskiy 218e710cc2 ARM: defconfig: lpc32xx: enable NFSv4 support
The change allows to mount rootfs shared on an NFSv4 server.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-01-26 00:06:25 +02:00
Linus Walleij ff8524b733 ARM: defconfig: Switch LPC32xx to use PL11x DRM driver
None of the LPC32xx device trees contains any display settings,
it just defines a device tree node for the CLCD (PL11x) left
as "disabled" on lpc3250-ea3250 and "okay" on lpc3250-phy3250
but no panels are attached on any device tree, so the driver
will simply bail out.

I conclude that the hardware is dormant on existing
systems, so we can without any problems switch the defconfig
over from the old ARMCLCD frame buffer driver to the new
PL11x DRM driver.

Cc: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[vzapolskiy: deselected I2C as selected by DRM; fixed SoC name]
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-01-25 23:16:14 +02:00
Linus Walleij dd837104f5 ARM: defconfig: Update LPC32xx defconfig
This simply updates the LPC32xx defconfig against the current
Kconfig structure in the kernel so we can make changed to the
defconfig without disturbing noise.

Cc: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-01-25 23:16:14 +02:00
Linus Walleij 34a5cf06af ARM: defconfig: Switch LPC18xx to use PL11x DRM driver
None of the LPC18xx device trees contains any display settings,
it just defines a device tree node for the CLCD (PL11x) set
as "disabled" and no panels are attached on any device tree.

This I conclude that the hardware is dormant on existing
systems, so we can without any problems switch the defconfig
over from the old ARMCLCD frame buffer driver to the new
PL11x DRM driver.

Cc: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[vzapolskiy: deselected I2C build option as selected by DRM]
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-01-25 23:15:27 +02:00
Geert Uytterhoeven 03ff967793 ARM: multi_v7_defconfig: Enable support for RZ/A2
Enable support for the RZ/A2 SoC, including pin control, now the DTS for
the Renesas RZ/A2M evaluation board is included.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-25 11:03:04 +01:00
Geert Uytterhoeven 58319b7c37 ARM: shmobile: defconfig: Enable support for RZ/A2
Enable support for the RZ/A2 SoC, including pin control, now the DTS for
the Renesas RZ/A2M evaluation board is included.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-25 11:02:42 +01:00
Linus Walleij 3a69d03f6d ARM: defconfig: Update LPC18xx defconfig
This simply updates the LPC18xx defconfig against the current
Kconfig structure in the kernel so we can make changed to the
defconfig without disturbing noise.

Cc: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2019-01-23 00:16:33 +02:00
Geert Uytterhoeven 4162325afd ARM: shmobile: defconfig: Refresh for v5.0-rc1
- Move SoC config options (moved in commit 062887bf5e ("ARM:
    shmobile: Move SoC Kconfig symbols to drivers/soc/renesas/")),
  - Move PCI config options (moved in commit eb01d42a77 ("PCI:
    consolidate PCI config entry in drivers/pci")),
  - Drop CONFIG_I2C_MUX=y (auto-enabled since commit ea6b13e9fe
    ("drm/bridge/sii902x: Add missing dependency on I2C_MUX")),
  - Drop CONFIG_SH_DMAE=y (no longer selectable since commit
    a19788612f ("dmaengine: sh: Remove R-Mobile APE6 support")),
  - Drop CONFIG_ARM_UNWIND (auto-enabled since commit f9b58e8c7d
    ("ARM: 8800/1: use choice for kernel unwinders")).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22 14:42:11 +01:00
Paweł Chmiel 25c390ec22 ARM: s5pv210_defconfig: Enable cpufreq
Enable cpufreq drivers for all S5Pv210 devices.

Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-01-13 10:31:17 +01:00
Paweł Chmiel d6aebe5116 ARM: s5pv210_defconfig: Enable more drivers present on Samsung Aries
Enable following drivers for Samsung Aries family of devices:
- I2C support (using s3c2410 driver)
- s5p-jpeg
- s5p-mfc
- Exynos DRM rotator
- PWM support
- PWM vibrator
- Fixed regulator
- Syscon poweroff
- Atmel maXTouch touchscreen
- Broadcom BCM4329 Bluetooth over UART0
- DMA devices (so we can use pl330 DMA driver)

Disable DEBUG_LL. It's currently set to UART1, but if we want to use it
on Aries, we would need to switch it to UART2, to get any logs.

Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-01-13 10:28:12 +01:00
Paweł Chmiel 0775989a33 ARM: s5pv210_defconfig: Run make savedefconfig
Run savedefconfig to cleanup the config and prepare for enabling more
drivers for Samsung Aries based devices.

Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-01-13 10:26:13 +01:00
Daniel Mack 0f884f8a09 ARM: pxa: remove raumfeld board files and defconfig
These boards are now fully ported to device-tree, so the old implementation
can go away.

The defconfig needs downstream quirks anyway, so we can just remove it from
mainline.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2019-01-09 21:39:37 +01:00
Biju Das e5168ec09d ARM: multi_v7_defconfig: Enable NXP pcf85363 rtc
The iWave RZ/G1C SBC supports RTC (NXP pcf85263). To increase
hardware support enable the driver in the multi_v7_defconfig
multiplatform configuration.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-07 13:19:40 +01:00
Biju Das 71e3039dd7 ARM: shmobile: Enable NXP pcf85363 rtc in shmobile_defconfig
The iWave RZ/G1C SBC supports RTC (NXP pcf85263). To increase hardware
support enable the driver in the shmobile_defconfig multiplatform
configuration.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-07 13:19:40 +01:00
Linus Torvalds b23b0ea370 ARM: SoC: late updates
A few updates that we merged late but are low risk for regressions for
 other platforms (and a few other straggling patches):
 
  - I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
    here. They're for a driver for the PL353 SRAM controller and a build
    fix for the qualcomm scm driver.
  - A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated Vivante
    GPU, 256MB RAM, Wifi). This includes some acked platform-specific
    drivers (serial, etc). This also include DTs for two boards with this
    SoC, OrangePi 2G and OrangePi i86.
  - i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
    video playback offload). This is the first i.MX 64-bit SoC.
  - Some minor updates to Samsung boards (adding a few peripherals in
    DTs).
  - Small rework for SMP bootup on STi platforms.
  - A couple of TEE driver fixes.
  - A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
    enabled in defconfigs.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwv4lAPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3JQsQAIcvwnI8rKPEskd20kNaj5bCUlG2hcIN/VoT
 scq1iCXpICOF53jBQvDoe48n+Ji4mI2VD7AIZD8XVppR+aHgpy8fkjX+uz8Ap0dG
 8B2y9vJ6nomrxKslnFEUk6LxpsaadpzTQDlcHAQvPdJxkvmMuA2b8LMGZhoAQ+dB
 lCw/qbjmoMEAV+dKXqRu62wwjZ10j4B7ex1XB1gnfjJYy+Splnd5fkdFCvd3wk+7
 BOH2iGROyLC0TC6ggqv45NNm6EykO9XqI5nq/3VHq9aBVJVWtFUQhDScjNf6qyYM
 mvUg6ZxmiTyIjhN+erttFXtxSKCH0BIdlBLZzaQ9W2XbTKMgzUlgK5GjQGqKCG6A
 QZHs9oe/TQuaHZ2ghMRbxcTWZC8Zdi1hYYa8fB7yNCZKnPNLRaA5P7O/3/s796B6
 DXpIHlU4lpyRdg26Zxh+FXYIXLsUYk9WNcwhjFbUQ/WXP3L9qf7FUU1EeSQeGDHU
 yRCE+kuKFs5FJnAZYXQ+0BCv0v8GFLMKTXDTbYtVFt0QDWVeeWwRt6gCOcHv1vBI
 IbZ0QLn1fzW2efgsXXB9i9VXO5AiP3EMx2A9Lqvrv+ufRXzQlBPbYZhN/Lp+BuDC
 moWdT5Cmye00uu35wY6H7Ycd+CO29dJ/B+hKbgqjyzFkZJiwWnPoeVQH2M1IkjOj
 IydIEbEo
 =qgZw
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull more ARM SoC updates from Olof Johansson:
 "A few updates that we merged late but are low risk for regressions for
  other platforms (and a few other straggling patches):

   - I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
     here. They're for a driver for the PL353 SRAM controller and a
     build fix for the qualcomm scm driver.

   - A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated
     Vivante GPU, 256MB RAM, Wifi). This includes some acked
     platform-specific drivers (serial, etc). This also include DTs for
     two boards with this SoC, OrangePi 2G and OrangePi i86.

   - i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
     video playback offload). This is the first i.MX 64-bit SoC.

   - Some minor updates to Samsung boards (adding a few peripherals in
     DTs).

   - Small rework for SMP bootup on STi platforms.

   - A couple of TEE driver fixes.

   - A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
     enabled in defconfigs"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
  ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC
  arm64: defconfig: Re-enable bcm2835-thermal driver
  MAINTAINERS: Add entry for RDA Micro SoC architecture
  tty: serial: Add RDA8810PL UART driver
  ARM: dts: rda8810pl: Add interrupt support for UART
  dt-bindings: serial: Document RDA Micro UART
  ARM: dts: rda8810pl: Add timer support
  ARM: dts: Add devicetree for OrangePi i96 board
  ARM: dts: Add devicetree for OrangePi 2G IoT board
  ARM: dts: Add devicetree for RDA8810PL SoC
  ARM: Prepare RDA8810PL SoC
  dt-bindings: arm: Document RDA8810PL and reference boards
  dt-bindings: Add RDA Micro vendor prefix
  ARM: sti: remove pen_release and boot_lock
  arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
  arm64: dts: imx8mq-evk: enable watchdog
  arm64: dts: imx8mq: add watchdog devices
  MAINTAINERS: add i.MX8 DT path to i.MX architecture
  arm64: add support for i.MX8M EVK board
  arm64: add basic DTS for i.MX8MQ
  ...
2019-01-05 11:30:37 -08:00
Masahiro Yamada 8e564895c3 ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC
Enable the UniPhier MIO DMAC driver. This is used as the DMA engine
for accelerating the SD/eMMC controller drivers.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-01-04 14:26:19 -08:00
Linus Torvalds e1ef035d27 ARM: SoC defconfig updates
Most changes here are to enable new drivers and platforms in the various
 configs that affect them. Most of these have been covered and described
 in the other branches, we mostly keep defconfig separate to avoid
 conflicts between SoC/dt/driver updates that they otherwise would be
 grouped with.
 
 One thing worth mentioning here is that OMAP changes from using their
 own UART driver, to 8250, for the multi_v7_defconfig shared config on
 32-bit. This means that the console is now named ttyS* instead of ttyO*.
 This change was already done for omap2_defconfig a while back, so most
 users of these configs have either already updated, or can easily follow
 the same patterns as they did at that time. This makes platform support
 slightly easier for distros, since they no longer need to keep track of
 a separate console prefix for these platforms.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwqg+4PHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3nHcQAKrzSPsi3NWZHAIyP9Gcsu/mqebeB7ATnUVB
 EfsYl+0ZLwZjex2pI7YmDih4QgOui3caOYU3rlqcu+zTSXYp03GnzA/fuW/aOBr3
 Y4UYQcUIJULJyYzE14y5MhYxMfedF5U4yfayQj/6Xn4dojSICb19/CxD7lEtxUBQ
 DqYizTnR5ABRVDnRXmgo0TcHCSa05xP5Hn48DL02fJUc1oHzv3RoH2MrC4j4a2QO
 k0INYeq9cRFv9kcuz4S0VRXDvpA6cLsa9RZ8I3eJ+tpDFK8HmNyrij98CQLBwb/S
 UzuC+DvD5MdJsf6Tp15enXIKtLKBtEQiXVncX5dCFLGW+lfZb0FyMa6Q4herGEL3
 NLifwcxDwiATKJkGuQKJHhCnMVGanUz+fn+7nXbHtloOsR/2ttofaTFCCURN0Pr+
 oIa79JSd58SES+Rqz7V17r08SuK5iMjF8XENDMuim095WIt2ysoKW7P11eq/CjNf
 qheaiBK/ANHeYaVLb6OG7V5SMjsxWYcUfvwONiA5Qs1HbjiOXamUBOAiBF8zMBZc
 rd21X2kqVpfU/IDgqhWTEawtl76gh9+1uCbbL5l+qiwyFfRw0b/9pakMs3szgD+v
 2w49p/WwOQQoxzV5jCBlo36ZzKISrKGnTEQhRadtxCPPnrg/8emUNU6S/aHB2OmH
 x1Vehuja
 =65qL
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC defconfig updates from Olof Johansson:
 "Most changes here are to enable new drivers and platforms in the
  various configs that affect them. Most of these have been covered and
  described in the other branches, we mostly keep defconfig separate to
  avoid conflicts between SoC/dt/driver updates that they otherwise
  would be grouped with.

  One thing worth mentioning here is that OMAP changes from using their
  own UART driver, to 8250, for the multi_v7_defconfig shared config on
  32-bit. This means that the console is now named ttyS* instead of
  ttyO*. This change was already done for omap2_defconfig a while back,
  so most users of these configs have either already updated, or can
  easily follow the same patterns as they did at that time. This makes
  platform support slightly easier for distros, since they no longer
  need to keep track of a separate console prefix for these platforms"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
  Revert "arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO"
  arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO
  arm64: defconfig: Replace PINCTRL_MT7622 with PINCTRL_MTK_MOORE
  arm64: defconfig: Regenerate for v4.20
  ARM: multi_v7_defconfig: Add TOSHIBA TC358764 bridge driver
  ARM: multi_v7_defconfig: Add MAX8952 regulator driver
  ARM: exynos_defconfig: Add TOSHIBA TC358764 bridge driver
  ARM: exynos_defconfig: Add MAX8952 regulator driver
  ARM: exynos_defconfig: Add MAX8998 RTC and charger drivers
  ARM: imx_v6_v7_defconfig: add imx7ulp support
  ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
  ARM: multi_v7_defconfig: enable STM32 analog & timer drivers
  arm64: defconfig: Enable GCC and PINCTRL for MSM8998
  arm64: defconfig: Enable core Qualcomm SDM845 options
  ARM: defconfig: Enable the PL111 DRM driver on vexpress
  ARM: defconfig: Update the vexpress defconfig
  arm64: defconfig: Enable some qcom remoteproc configs
  arm64: defconfig: Enable QCS404 configs
  ARM: imx_v6_v7_defconfig: Enable USB_ANNOUNCE_NEW_DEVICES
  ARM: imx_v6_v7_defconfig: Enable BT_BNEP
  ...
2018-12-31 17:40:14 -08:00