Commit Graph

1170 Commits

Author SHA1 Message Date
Xiubo Li 7d7046a6ca libceph: fail sparse-read if the data length doesn't match
[ Upstream commit cd7d469c25704d414d71bf3644f163fb74e7996b ]

Once this happens that means there have bugs.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01 13:34:56 +01:00
Xiubo Li da9c33a70f libceph: just wait for more data to be available on the socket
[ Upstream commit 8e46a2d068c92a905d01cbb018b00d66991585ab ]

A short read may occur while reading the message footer from the
socket.  Later, when the socket is ready for another read, the
messenger invokes all read_partial_*() handlers, including
read_partial_sparse_msg_data().  The expectation is that
read_partial_sparse_msg_data() would bail, allowing the messenger to
invoke read_partial() for the footer and pick up where it left off.

However read_partial_sparse_msg_data() violates that and ends up
calling into the state machine in the OSD client.  The sparse-read
state machine assumes that it's a new op and interprets some piece of
the footer as the sparse-read header and returns bogus extents/data
length, etc.

To determine whether read_partial_sparse_msg_data() should bail, let's
reuse cursor->total_resid.  Because once it reaches to zero that means
all the extents and data have been successfully received in last read,
else it could break out when partially reading any of the extents and
data.  And then osd_sparse_read() could continue where it left off.

[ idryomov: changelog ]

Link: https://tracker.ceph.com/issues/63586
Fixes: d396f89db3 ("libceph: add sparse read support to msgr1")
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-16 19:10:53 +01:00
Xiubo Li 90731f99f8 libceph: rename read_sparse_msg_*() to read_partial_sparse_msg_*()
[ Upstream commit ee97302fbc0c98a25732d736fc73aaf4d62c4128 ]

These functions are supposed to behave like other read_partial_*()
handlers: the contract with messenger v1 is that the handler bails if
the area of the message it's responsible for is already processed.
This comes up when handling short reads from the socket.

[ idryomov: changelog ]

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Stable-dep-of: 8e46a2d068c9 ("libceph: just wait for more data to be available on the socket")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-16 19:10:53 +01:00
Jordan Rife 7563cf17dc libceph: use kernel_connect()
Direct calls to ops->connect() can overwrite the address parameter when
used in conjunction with BPF SOCK_ADDR hooks. Recent changes to
kernel_connect() ensure that callers are insulated from such side
effects. This patch wraps the direct call to ops->connect() with
kernel_connect() to prevent unexpected changes to the address passed to
ceph_tcp_connect().

This change was originally part of a larger patch targeting the net tree
addressing all instances of unprotected calls to ops->connect()
throughout the kernel, but this change was split up into several patches
targeting various trees.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/netdev/20230821100007.559638-1-jrife@google.com/
Link: https://lore.kernel.org/netdev/9944248dba1bce861375fcce9de663934d933ba9.camel@redhat.com/
Fixes: d74bad4e74 ("bpf: Hooks for sys_connect")
Signed-off-by: Jordan Rife <jrife@google.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-10-09 13:35:24 +02:00
Herbert Xu e6a28d6303 libceph: do not include crypto/algapi.h
The header file crypto/algapi.h is for internal use only.  Use the
header file crypto/utils.h instead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-08-24 11:24:37 +02:00
Jeff Layton 4e8c4c2355 libceph: allow ceph_osdc_new_request to accept a multi-op read
Currently we have some special-casing for multi-op writes, but in the
case of a read, we can't really handle it. All of the current multi-op
callers call it with CEPH_OSD_FLAG_WRITE set.

Have ceph_osdc_new_request check for CEPH_OSD_FLAG_READ and if it's set,
allocate multiple reply ops instead of multiple request ops. If neither
flag is set, return -EINVAL.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-08-24 11:24:35 +02:00
Jeff Layton 69dd3b3930 libceph: add CEPH_OSD_OP_ASSERT_VER support
...and record the user_version in the reply in a new field in
ceph_osd_request, so we can populate the assert_ver appropriately.
Shuffle the fields a bit too so that the new field fits in an
existing hole on x86_64.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-08-24 11:24:35 +02:00
Jeff Layton dee0c5f834 libceph: add new iov_iter-based ceph_msg_data_type and ceph_osd_data_type
Add an iov_iter to the unions in ceph_msg_data and ceph_msg_data_cursor.
Instead of requiring a list of pages or bvecs, we can just use an
iov_iter directly, and avoid extra allocations.

We assume that the pages represented by the iter are pinned such that
they shouldn't incur page faults, which is the case for the iov_iters
created by netfs.

While working on this, Al Viro informed me that he was going to change
iov_iter_get_pages to auto-advance the iterator as that pattern is more
or less required for ITER_PIPE anyway. We emulate that here for now by
advancing in the _next op and tracking that amount in the "lastlen"
field.

In the event that _next is called twice without an intervening
_advance, we revert the iov_iter by the remaining lastlen before
calling iov_iter_get_pages.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-08-22 09:01:48 +02:00
Jeff Layton f628d79997 libceph: add sparse read support to OSD client
Have get_reply check for the presence of sparse read ops in the
request and set the sparse_read boolean in the msg. That will queue the
messenger layer to use the sparse read codepath instead of the normal
data receive.

Add a new sparse_read operation for the OSD client, driven by its own
state machine. The messenger will repeatedly call the sparse_read
operation, and it will pass back the necessary info to set up to read
the next extent of data, while zero-filling the sparse regions.

The state machine will stop at the end of the last extent, and will
attach the extent map buffer to the ceph_osd_req_op so that the caller
can use it.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-08-22 09:01:47 +02:00
Jeff Layton d396f89db3 libceph: add sparse read support to msgr1
Add 2 new fields to ceph_connection_v1_info to track the necessary info
in sparse reads. Skip initializing the cursor for a sparse read.

Break out read_partial_message_section into a wrapper around a new
read_partial_message_chunk function that doesn't zero out the crc first.

Add new helper functions to drive receiving into the destinations
provided by the sparse_read state machine.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-08-22 09:01:47 +02:00
Jeff Layton f36217e35c libceph: support sparse reads on msgr2 secure codepath
Add a new init_sgs_pages helper that populates the scatterlist from
an arbitrary point in an array of pages.

Change setup_message_sgs to take an optional pointer to an array of
pages. If that's set, then the scatterlist will be set using that
array instead of the cursor.

When given a sparse read on a secure connection, decrypt the data
in-place rather than into the final destination, by passing it the
in_enc_pages array.

After decrypting, run the sparse_read state machine in a loop, copying
data from the decrypted pages until it's complete.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-08-22 09:01:47 +02:00
Jeff Layton ec3bc567ea libceph: new sparse_read op, support sparse reads on msgr2 crc codepath
Add support for a new sparse_read ceph_connection operation. The idea is
that the client driver can define this operation use it to do special
handling for incoming reads.

The alloc_msg routine will look at the request and determine whether the
reply is expected to be sparse. If it is, then we'll dispatch to a
different set of state machine states that will repeatedly call the
driver's sparse_read op to get length and placement info for reading the
extent map, and the extents themselves.

This necessitates adding some new field to some other structs:

- The msg gets a new bool to track whether it's a sparse_read request.

- A new field is added to the cursor to track the amount remaining in the
current extent. This is used to cap the read from the socket into the
msg_data

- Handing a revoke with all of this is particularly difficult, so I've
added a new data_len_remain field to the v2 connection info, and then
use that to skip that much on a revoke. We may want to expand the use of
that to the normal read path as well, just for consistency's sake.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-08-22 09:01:47 +02:00
Jeff Layton a679e50f72 libceph: define struct ceph_sparse_extent and add some helpers
When the OSD sends back a sparse read reply, it contains an array of
these structures. Define the structure and add a couple of helpers for
dealing with them.

Also add a place in struct ceph_osd_req_op to store the extent buffer,
and code to free it if it's populated when the req is torn down.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-08-22 09:01:47 +02:00
Jeff Layton 08b8a0440e libceph: add spinlock around osd->o_requests
In a later patch, we're going to need to search for a request in
the rbtree, but taking the o_mutex is inconvenient as we already
hold the con mutex at the point where we need it.

Add a new spinlock that we take when inserting and erasing entries from
the o_requests tree. Search of the rbtree can be done with either the
mutex or the spinlock, but insertion and removal requires both.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-08-22 09:01:47 +02:00
Ilya Dryomov e6e2843230 libceph: fix potential hang in ceph_osdc_notify()
If the cluster becomes unavailable, ceph_osdc_notify() may hang even
with osd_request_timeout option set because linger_notify_finish_wait()
waits for MWatchNotify NOTIFY_COMPLETE message with no associated OSD
request in flight -- it's completely asynchronous.

Introduce an additional timeout, derived from the specified notify
timeout.  While at it, switch both waits to killable which is more
correct.

Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
2023-08-02 09:07:34 +02:00
Ilya Dryomov 8ff2c64c97 rbd: harden get_lock_owner_info() a bit
- we want the exclusive lock type, so test for it directly
- use sscanf() to actually parse the lock cookie and avoid admitting
  invalid handles
- bail if locker has a blank address

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2023-07-26 15:08:09 +02:00
Ilya Dryomov a282a2f105 libceph: harden msgr2.1 frame segment length checks
ceph_frame_desc::fd_lens is an int array.  decode_preamble() thus
effectively casts u32 -> int but the checks for segment lengths are
written as if on unsigned values.  While reading in HELLO or one of the
AUTH frames (before authentication is completed), arithmetic in
head_onwire_len() can get duped by negative ctrl_len and produce
head_len which is less than CEPH_PREAMBLE_LEN but still positive.
This would lead to a buffer overrun in prepare_read_control() as the
preamble gets copied to the newly allocated buffer of size head_len.

Cc: stable@vger.kernel.org
Fixes: cd1a677cad ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Reported-by: Thelford Williams <thelford@google.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
2023-07-13 13:18:57 +02:00
David Howells 5da4d7b8e6 libceph: Partially revert changes to support MSG_SPLICE_PAGES
Fix the mishandling of MSG_DONTWAIT and also reinstates the per-page
checking of the source pages (which might have come from a DIO write by
userspace) by partially reverting the changes to support MSG_SPLICE_PAGES
and doing things a little differently.  In messenger_v1:

 (1) The ceph_tcp_sendpage() is resurrected and the callers reverted to use
     that.

 (2) The callers now pass MSG_MORE unconditionally.  Previously, they were
     passing in MSG_MORE|MSG_SENDPAGE_NOTLAST and then degrading that to
     just MSG_MORE on the last call to ->sendpage().

 (3) Make ceph_tcp_sendpage() a wrapper around sendmsg() rather than
     sendpage(), setting MSG_SPLICE_PAGES if sendpage_ok() returns true on
     the page.

In messenger_v2:

 (4) Bring back do_try_sendpage() and make the callers use that.

 (5) Make do_try_sendpage() use sendmsg() for both cases and set
     MSG_SPLICE_PAGES if sendpage_ok() is set.

Fixes: 40a8c17aa7 ("ceph: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage")
Fixes: fa094ccae1 ("ceph: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage()")
Reported-by: Ilya Dryomov <idryomov@gmail.com>
Link: https://lore.kernel.org/r/CAOi1vP9vjLfk3W+AJFeexC93jqPaPUn2dD_4NrzxwoZTbYfOnw@mail.gmail.com/
Link: https://lore.kernel.org/r/CAOi1vP_Bn918j24S94MuGyn+Gxk212btw7yWeDrRcW1U8pc_BA@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Link: https://lore.kernel.org/r/3101881.1687801973@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/3111635.1687813501@warthog.procyon.org.uk/ # v2
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Link: https://lore.kernel.org/r/3199652.1687873788@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-27 09:32:40 -07:00
David Howells fa094ccae1 ceph: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage()
Use sendmsg() and MSG_SPLICE_PAGES rather than sendpage in ceph when
transmitting data.  For the moment, this can only transmit one page at a
time because of the architecture of net/ceph/, but if
write_partial_message_data() can be given a bvec[] at a time by the
iteration code, this would allow pages to be sent in a batch.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Link: https://lore.kernel.org/r/20230623225513.2732256-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24 15:50:12 -07:00
David Howells 40a8c17aa7 ceph: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage
Use sendmsg() and MSG_SPLICE_PAGES rather than sendpage in ceph when
transmitting data.  For the moment, this can only transmit one page at a
time because of the architecture of net/ceph/, but if
write_partial_message_data() can be given a bvec[] at a time by the
iteration code, this would allow pages to be sent in a batch.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Link: https://lore.kernel.org/r/20230623225513.2732256-4-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24 15:50:12 -07:00
Linus Torvalds 5b7c4cabbb Networking changes for 6.3.
Core
 ----
 
  - Add dedicated kmem_cache for typical/small skb->head, avoid having
    to access struct page at kfree time, and improve memory use.
 
  - Introduce sysctl to set default RPS configuration for new netdevs.
 
  - Define Netlink protocol specification format which can be used
    to describe messages used by each family and auto-generate parsers.
    Add tools for generating kernel data structures and uAPI headers.
 
  - Expose all net/core sysctls inside netns.
 
  - Remove 4s sleep in netpoll if carrier is instantly detected on boot.
 
  - Add configurable limit of MDB entries per port, and port-vlan.
 
  - Continue populating drop reasons throughout the stack.
 
  - Retire a handful of legacy Qdiscs and classifiers.
 
 Protocols
 ---------
 
  - Support IPv4 big TCP (TSO frames larger than 64kB).
 
  - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
    on socket by socket basis.
 
  - Track and report in procfs number of MPTCP sockets used.
 
  - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
    path manager.
 
  - IPv6: don't check net.ipv6.route.max_size and rely on garbage
    collection to free memory (similarly to IPv4).
 
  - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
 
  - ICMP: add per-rate limit counters.
 
  - Add support for user scanning requests in ieee802154.
 
  - Remove static WEP support.
 
  - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
    reporting.
 
  - WiFi 7 EHT channel puncturing support (client & AP).
 
 BPF
 ---
 
  - Add a rbtree data structure following the "next-gen data structure"
    precedent set by recently added linked list, that is, by using
    kfunc + kptr instead of adding a new BPF map type.
 
  - Expose XDP hints via kfuncs with initial support for RX hash and
    timestamp metadata.
 
  - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
    to better support decap on GRE tunnel devices not operating
    in collect metadata.
 
  - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
 
  - Remove the need for trace_printk_lock for bpf_trace_printk
    and bpf_trace_vprintk helpers.
 
  - Extend libbpf's bpf_tracing.h support for tracing arguments of
    kprobes/uprobes and syscall as a special case.
 
  - Significantly reduce the search time for module symbols
    by livepatch and BPF.
 
  - Enable cpumasks to be used as kptrs, which is useful for tracing
    programs tracking which tasks end up running on which CPUs in
    different time intervals.
 
  - Add support for BPF trampoline on s390x and riscv64.
 
  - Add capability to export the XDP features supported by the NIC.
 
  - Add __bpf_kfunc tag for marking kernel functions as kfuncs.
 
  - Add cgroup.memory=nobpf kernel parameter option to disable BPF
    memory accounting for container environments.
 
 Netfilter
 ---------
 
  - Remove the CLUSTERIP target. It has been marked as obsolete
    for years, and we still have WARN splats wrt. races of
    the out-of-band /proc interface installed by this target.
 
  - Add 'destroy' commands to nf_tables. They are identical to
    the existing 'delete' commands, but do not return an error if
    the referenced object (set, chain, rule...) did not exist.
 
 Driver API
 ----------
 
  - Improve cpumask_local_spread() locality to help NICs set the right
    IRQ affinity on AMD platforms.
 
  - Separate C22 and C45 MDIO bus transactions more clearly.
 
  - Introduce new DCB table to control DSCP rewrite on egress.
 
  - Support configuration of Physical Layer Collision Avoidance (PLCA)
    Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
    shared medium Ethernet.
 
  - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
    preemption of low priority frames by high priority frames.
 
  - Add support for controlling MACSec offload using netlink SET.
 
  - Rework devlink instance refcounts to allow registration and
    de-registration under the instance lock. Split the code into multiple
    files, drop some of the unnecessarily granular locks and factor out
    common parts of netlink operation handling.
 
  - Add TX frame aggregation parameters (for USB drivers).
 
  - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
    messages with notifications for debug.
 
  - Allow offloading of UDP NEW connections via act_ct.
 
  - Add support for per action HW stats in TC.
 
  - Support hardware miss to TC action (continue processing in SW from
    a specific point in the action chain).
 
  - Warn if old Wireless Extension user space interface is used with
    modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
    for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
    interface instead.
 
  - Improve the CAN bit timing configuration. Use extack to return error
    messages directly to user space, update the SJW handling, including
    the definition of a new default value that will benefit CAN-FD
    controllers, by increasing their oscillator tolerance.
 
 New hardware / drivers
 ----------------------
 
  - Ethernet:
    - nVidia BlueField-3 support (control traffic driver)
    - Ethernet support for imx93 SoCs
    - Motorcomm yt8531 gigabit Ethernet PHY
    - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
    - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
    - Amlogic gxl MDIO mux
 
  - WiFi:
    - RealTek RTL8188EU (rtl8xxxu)
    - Qualcomm Wi-Fi 7 devices (ath12k)
 
  - CAN:
    - Renesas R-Car V4H
 
 Drivers
 -------
 
  - Bluetooth:
    - Set Per Platform Antenna Gain (PPAG) for Intel controllers.
 
  - Ethernet NICs:
    - Intel (1G, igc):
      - support TSN / Qbv / packet scheduling features of i226 model
    - Intel (100G, ice):
      - use GNSS subsystem instead of TTY
      - multi-buffer XDP support
      - extend support for GPIO pins to E823 devices
    - nVidia/Mellanox:
      - update the shared buffer configuration on PFC commands
      - implement PTP adjphase function for HW offset control
      - TC support for Geneve and GRE with VF tunnel offload
      - more efficient crypto key management method
      - multi-port eswitch support
    - Netronome/Corigine:
      - add DCB IEEE support
      - support IPsec offloading for NFP3800
    - Freescale/NXP (enetc):
      - enetc: support XDP_REDIRECT for XDP non-linear buffers
      - enetc: improve reconfig, avoid link flap and waiting for idle
      - enetc: support MAC Merge layer
    - Other NICs:
      - sfc/ef100: add basic devlink support for ef100
      - ionic: rx_push mode operation (writing descriptors via MMIO)
      - bnxt: use the auxiliary bus abstraction for RDMA
      - r8169: disable ASPM and reset bus in case of tx timeout
      - cpsw: support QSGMII mode for J721e CPSW9G
      - cpts: support pulse-per-second output
      - ngbe: add an mdio bus driver
      - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
      - r8152: handle devices with FW with NCM support
      - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
      - virtio-net: support multi buffer XDP
      - virtio/vsock: replace virtio_vsock_pkt with sk_buff
      - tsnep: XDP support
 
  - Ethernet high-speed switches:
    - nVidia/Mellanox (mlxsw):
      - add support for latency TLV (in FW control messages)
    - Microchip (sparx5):
      - separate explicit and implicit traffic forwarding rules, make
        the implicit rules always active
      - add support for egress DSCP rewrite
      - IS0 VCAP support (Ingress Classification)
      - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
      - ES2 VCAP support (Egress Access Control)
      - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
 
  - Ethernet embedded switches:
    - Marvell (mv88e6xxx):
      - add MAB (port auth) offload support
      - enable PTP receive for mv88e6390
    - NXP (ocelot):
      - support MAC Merge layer
      - support for the the vsc7512 internal copper phys
    - Microchip:
      - lan9303: convert to PHYLINK
      - lan966x: support TC flower filter statistics
      - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
      - lan937x: support Credit Based Shaper configuration
      - ksz9477: support Energy Efficient Ethernet
    - other:
      - qca8k: convert to regmap read/write API, use bulk operations
      - rswitch: Improve TX timestamp accuracy
 
  - Intel WiFi (iwlwifi):
    - EHT (Wi-Fi 7) rate reporting
    - STEP equalizer support: transfer some STEP (connection to radio
      on platforms with integrated wifi) related parameters from the
      BIOS to the firmware.
 
  - Qualcomm 802.11ax WiFi (ath11k):
    - IPQ5018 support
    - Fine Timing Measurement (FTM) responder role support
    - channel 177 support
 
  - MediaTek WiFi (mt76):
    - per-PHY LED support
    - mt7996: EHT (Wi-Fi 7) support
    - Wireless Ethernet Dispatch (WED) reset support
    - switch to using page pool allocator
 
  - RealTek WiFi (rtw89):
    - support new version of Bluetooth co-existance
 
  - Mobile:
    - rmnet: support TX aggregation.
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmP1VIYACgkQMUZtbf5S
 IrvsChAApz0rNL/sPKxXTEfxZ1tN7D3sYxYKQPomxvl5BV+MvicrLddJy3KmzEFK
 nnJNO3nuRNuH422JQ/ylZ4mGX1opa6+5QJb0UINImXUI7Fm8HHBIuPGkv7d5CheZ
 7JexFqjPJXUy9nPyh1Rra+IA9AcRd2U7jeGEZR38wb99bHJQj5Bzdk20WArEB0el
 n44aqg49LXH71bSeXRz77x5SjkwVtYiccQxLcnmTbjLU2xVraLvI2J+wAhHnVXWW
 9lrU1+V4Ex2Xcd1xR0L0cHeK+meP1TrPRAeF+JDpVI3a/zJiE7cZjfHdG/jH5xWl
 leZJqghVozrZQNtewWWO7XhUFhMDgFu3W/1vNLjSHPZEqaz1JpM67J1+ql6s63l4
 LMWoXbcYZz+SL9ZRCoPkbGue/5fKSHv8/Jl9Sh58+eTS+c/zgN8uFGRNFXLX1+EP
 n8uvt985PxMd6x1+dHumhOUzxnY4Sfi1vjitSunTsNFQ3Cmp4SO0IfBVJWfLUCuC
 xz5hbJGJJbSpvUsO+HWyCg83E5OWghRE/Onpt2jsQSZCrO9HDg4FRTEf3WAMgaqc
 edb5KfbRZPTJQM08gWdluXzSk1nw3FNP2tXW4XlgUrEbjb+fOk0V9dQg2gyYTxQ1
 Nhvn8ZQPi6/GMMELHAIPGmmW1allyOGiAzGlQsv8EmL+OFM6WDI=
 =xXhC
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...
2023-02-21 18:24:12 -08:00
Christoph Hellwig 1eb9cd1500 libceph: use bvec_set_page to initialize bvecs
Use the bvec_set_page helper to initialize bvecs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-24-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03 10:17:43 -07:00
Peilin Ye 40e0b09081 net/sock: Introduce trace_sk_data_ready()
As suggested by Cong, introduce a tracepoint for all ->sk_data_ready()
callback implementations.  For example:

<...>
  iperf-609  [002] .....  70.660425: sk_data_ready: family=2 protocol=6 func=sock_def_readable
  iperf-609  [002] .....  70.660436: sk_data_ready: family=2 protocol=6 func=sock_def_readable
<...>

Suggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-23 11:26:50 +00:00
Benjamin Coddington 98123866fc Treewide: Stop corrupting socket's task_frag
Since moving to memalloc_nofs_save/restore, SUNRPC has stopped setting the
GFP_NOIO flag on sk_allocation which the networking system uses to decide
when it is safe to use current->task_frag.  The results of this are
unexpected corruption in task_frag when SUNRPC is involved in memory
reclaim.

The corruption can be seen in crashes, but the root cause is often
difficult to ascertain as a crashing machine's stack trace will have no
evidence of being near NFS or SUNRPC code.  I believe this problem to
be much more pervasive than reports to the community may indicate.

Fix this by having kernel users of sockets that may corrupt task_frag due
to reclaim set sk_use_task_frag = false.  Preemptively correcting this
situation for users that still set sk_allocation allows them to convert to
memalloc_nofs_save/restore without the same unexpected corruptions that are
sure to follow, unlikely to show up in testing, and difficult to bisect.

CC: Philipp Reisner <philipp.reisner@linbit.com>
CC: Lars Ellenberg <lars.ellenberg@linbit.com>
CC: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Josef Bacik <josef@toxicpanda.com>
CC: Keith Busch <kbusch@kernel.org>
CC: Christoph Hellwig <hch@lst.de>
CC: Sagi Grimberg <sagi@grimberg.me>
CC: Lee Duncan <lduncan@suse.com>
CC: Chris Leech <cleech@redhat.com>
CC: Mike Christie <michael.christie@oracle.com>
CC: "James E.J. Bottomley" <jejb@linux.ibm.com>
CC: "Martin K. Petersen" <martin.petersen@oracle.com>
CC: Valentina Manea <valentina.manea.m@gmail.com>
CC: Shuah Khan <shuah@kernel.org>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: David Howells <dhowells@redhat.com>
CC: Marc Dionne <marc.dionne@auristor.com>
CC: Steve French <sfrench@samba.org>
CC: Christine Caulfield <ccaulfie@redhat.com>
CC: David Teigland <teigland@redhat.com>
CC: Mark Fasheh <mark@fasheh.com>
CC: Joel Becker <jlbec@evilplan.org>
CC: Joseph Qi <joseph.qi@linux.alibaba.com>
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: Dominique Martinet <asmadeus@codewreck.org>
CC: Ilya Dryomov <idryomov@gmail.com>
CC: Xiubo Li <xiubli@redhat.com>
CC: Chuck Lever <chuck.lever@oracle.com>
CC: Jeff Layton <jlayton@kernel.org>
CC: Trond Myklebust <trond.myklebust@hammerspace.com>
CC: Anna Schumaker <anna@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>

Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-19 17:28:49 -08:00
Linus Torvalds 75f4d9af8b iov_iter work; most of that is about getting rid of
direction misannotations and (hopefully) preventing
 more of the same for the future.
 
 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 -----BEGIN PGP SIGNATURE-----
 
 iHQEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY5ZzQAAKCRBZ7Krx/gZQ
 65RZAP4nTkvOn0NZLVFkuGOx8pgJelXAvrteyAuecVL8V6CR4AD40qCVY51PJp8N
 MzwiRTeqnGDxTTF7mgd//IB6hoatAA==
 =bcvF
 -----END PGP SIGNATURE-----

Merge tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull iov_iter updates from Al Viro:
 "iov_iter work; most of that is about getting rid of direction
  misannotations and (hopefully) preventing more of the same for the
  future"

* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  use less confusing names for iov_iter direction initializers
  iov_iter: saner checks for attempt to copy to/from iterator
  [xen] fix "direction" argument of iov_iter_kvec()
  [vhost] fix 'direction' argument of iov_iter_{init,bvec}()
  [target] fix iov_iter_bvec() "direction" argument
  [s390] memcpy_real(): WRITE is "data source", not destination...
  [s390] zcore: WRITE is "data source", not destination...
  [infiniband] READ is "data destination", not source...
  [fsi] WRITE is "data source", not destination...
  [s390] copy_oldmem_kernel() - WRITE is "data source", not destination
  csum_and_copy_to_iter(): handle ITER_DISCARD
  get rid of unlikely() on page_copy_sane() calls
2022-12-12 18:29:54 -08:00
Al Viro de4eda9de2 use less confusing names for iov_iter direction initializers
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.

Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-11-25 13:01:55 -05:00
Jason A. Donenfeld 8032bf1233 treewide: use get_random_u32_below() instead of deprecated function
This is a simple mechanical transformation done by:

@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
  (E)

Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Reviewed-by: SeongJae Park <sj@kernel.org> # for damon
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-18 02:15:15 +01:00
Linus Torvalds f1947d7c8a Random number generator fixes for Linux 6.1-rc1.
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEq5lC5tSkz8NBJiCnSfxwEqXeA64FAmNHYD0ACgkQSfxwEqXe
 A655AA//dJK0PdRghqrKQsl18GOCffV5TUw5i1VbJQbI9d8anfxNjVUQiNGZi4et
 qUwZ8OqVXxYx1Z1UDgUE39PjEDSG9/cCvOpMUWqN20/+6955WlNZjwA7Fk6zjvlM
 R30fz5CIJns9RFvGT4SwKqbVLXIMvfg/wDENUN+8sxt36+VD2gGol7J2JJdngEhM
 lW+zqzi0ABqYy5so4TU2kixpKmpC08rqFvQbD1GPid+50+JsOiIqftDErt9Eg1Mg
 MqYivoFCvbAlxxxRh3+UHBd7ZpJLtp1UFEOl2Rf00OXO+ZclLCAQAsTczucIWK9M
 8LCZjb7d4lPJv9RpXFAl3R1xvfc+Uy2ga5KeXvufZtc5G3aMUKPuIU7k28ZyblVS
 XXsXEYhjTSd0tgi3d0JlValrIreSuj0z2QGT5pVcC9utuAqAqRIlosiPmgPlzXjr
 Us4jXaUhOIPKI+Musv/fqrxsTQziT0jgVA3Njlt4cuAGm/EeUbLUkMWwKXjZLTsv
 vDsBhEQFmyZqxWu4pYo534VX2mQWTaKRV1SUVVhQEHm57b00EAiZohoOvweB09SR
 4KiJapikoopmW4oAUFotUXUL1PM6yi+MXguTuc1SEYuLz/tCFtK8DJVwNpfnWZpE
 lZKvXyJnHq2Sgod/hEZq58PMvT6aNzTzSg7YzZy+VabxQGOO5mc=
 =M+mV
 -----END PGP SIGNATURE-----

Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random

Pull more random number generator updates from Jason Donenfeld:
 "This time with some large scale treewide cleanups.

  The intent of this pull is to clean up the way callers fetch random
  integers. The current rules for doing this right are:

   - If you want a secure or an insecure random u64, use get_random_u64()

   - If you want a secure or an insecure random u32, use get_random_u32()

     The old function prandom_u32() has been deprecated for a while
     now and is just a wrapper around get_random_u32(). Same for
     get_random_int().

   - If you want a secure or an insecure random u16, use get_random_u16()

   - If you want a secure or an insecure random u8, use get_random_u8()

   - If you want secure or insecure random bytes, use get_random_bytes().

     The old function prandom_bytes() has been deprecated for a while
     now and has long been a wrapper around get_random_bytes()

   - If you want a non-uniform random u32, u16, or u8 bounded by a
     certain open interval maximum, use prandom_u32_max()

     I say "non-uniform", because it doesn't do any rejection sampling
     or divisions. Hence, it stays within the prandom_*() namespace, not
     the get_random_*() namespace.

     I'm currently investigating a "uniform" function for 6.2. We'll see
     what comes of that.

  By applying these rules uniformly, we get several benefits:

   - By using prandom_u32_max() with an upper-bound that the compiler
     can prove at compile-time is ≤65536 or ≤256, internally
     get_random_u16() or get_random_u8() is used, which wastes fewer
     batched random bytes, and hence has higher throughput.

   - By using prandom_u32_max() instead of %, when the upper-bound is
     not a constant, division is still avoided, because
     prandom_u32_max() uses a faster multiplication-based trick instead.

   - By using get_random_u16() or get_random_u8() in cases where the
     return value is intended to indeed be a u16 or a u8, we waste fewer
     batched random bytes, and hence have higher throughput.

  This series was originally done by hand while I was on an airplane
  without Internet. Later, Kees and I worked on retroactively figuring
  out what could be done with Coccinelle and what had to be done
  manually, and then we split things up based on that.

  So while this touches a lot of files, the actual amount of code that's
  hand fiddled is comfortably small"

* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  prandom: remove unused functions
  treewide: use get_random_bytes() when possible
  treewide: use get_random_u32() when possible
  treewide: use get_random_{u8,u16}() when possible, part 2
  treewide: use get_random_{u8,u16}() when possible, part 1
  treewide: use prandom_u32_max() when possible, part 2
  treewide: use prandom_u32_max() when possible, part 1
2022-10-16 15:27:07 -07:00
Jason A. Donenfeld 81895a65ec treewide: use prandom_u32_max() when possible, part 1
Rather than incurring a division or requesting too many random bytes for
the given range, use the prandom_u32_max() function, which only takes
the minimum required bytes from the RNG and avoids divisions. This was
done mechanically with this coccinelle script:

@basic@
expression E;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u64;
@@
(
- ((T)get_random_u32() % (E))
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ((E) - 1))
+ prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2)
|
- ((u64)(E) * get_random_u32() >> 32)
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ~PAGE_MASK)
+ prandom_u32_max(PAGE_SIZE)
)

@multi_line@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
identifier RAND;
expression E;
@@

-       RAND = get_random_u32();
        ... when != RAND
-       RAND %= (E);
+       RAND = prandom_u32_max(E);

// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@

        ((T)get_random_u32()@p & (LITERAL))

// Add one to the literal.
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@

value = None
if literal.startswith('0x'):
        value = int(literal, 16)
elif literal[0] in '123456789':
        value = int(literal, 10)
if value is None:
        print("I don't know how to handle %s" % (literal))
        cocci.include_match(False)
elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1:
        print("Skipping 0x%x for cleanup elsewhere" % (value))
        cocci.include_match(False)
elif value & (value + 1) != 0:
        print("Skipping 0x%x because it's not a power of two minus one" % (value))
        cocci.include_match(False)
elif literal.startswith('0x'):
        coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1))
else:
        coccinelle.RESULT = cocci.make_expr("%d" % (value + 1))

// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
expression add_one.RESULT;
identifier FUNC;
@@

-       (FUNC()@p & (LITERAL))
+       prandom_u32_max(RESULT)

@collapse_ret@
type T;
identifier VAR;
expression E;
@@

 {
-       T VAR;
-       VAR = (E);
-       return VAR;
+       return E;
 }

@drop_var@
type T;
identifier VAR;
@@

 {
-       T VAR;
        ... when != VAR
 }

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11 17:42:55 -06:00
Jeff Layton da4ab869e3 libceph: drop last_piece flag from ceph_msg_data_cursor
ceph_msg_data_next is always passed a NULL pointer for this field. Some
of the "next" operations look at it in order to determine the length,
but we can just take the min of the data on the page or cursor->resid.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-10-04 19:18:08 +02:00
Jeff Layton a8af0d682a libceph: clean up ceph_osdc_start_request prototype
This function always returns 0, and ignores the nofail boolean. Drop the
nofail argument, make the function void return and fix up the callers.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-08-03 14:05:39 +02:00
Jason Wang 4f88619455 libceph: fix ceph_pagelist_reserve() comment typo
The double `without' is duplicated in the comment, remove one.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-08-03 00:54:13 +02:00
Daichi Mukai 842d6b019b libceph: print fsid and epoch with osd id
Print fsid and epoch in libceph log messages to distinct from which
each message come.

[ idryomov: don't bother with gid for now, print epoch instead ]

Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Daichi Mukai <daichi-mukai@cybozu.co.jp>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-08-03 00:54:12 +02:00
Li Qiong fc54cb8d87 libceph: check pointer before assigned to "c->rules[]"
It should be better to check pointer firstly, then assign it
to c->rules[]. Refine code a little bit.

Signed-off-by: Li Qiong <liqiong@nfschina.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-08-03 00:54:12 +02:00
Guo Zhengkui d9d58f0402 libceph: use swap() macro instead of taking tmp variable
Fix the following coccicheck warning:
net/ceph/crush/mapper.c:1077:8-9: WARNING opportunity for swap()

by using swap() for the swapping of variable values and drop
the tmp variable that is not needed any more.

Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-05-25 20:45:13 +02:00
Ilya Dryomov d0bb883c63 libceph: fix misleading ceph_osdc_cancel_request() comment
cancel_request() never guaranteed that after its return the OSD
client would be completely done with the OSD request.  The callback
(if specified) can still be invoked and a ref can still be held.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
2022-05-18 21:21:29 +02:00
Ilya Dryomov 75dbb685f4 libceph: fix potential use-after-free on linger ping and resends
request_reinit() is not only ugly as the comment rightfully suggests,
but also unsafe.  Even though it is called with osdc->lock held for
write in all cases, resetting the OSD request refcount can still race
with handle_reply() and result in use-after-free.  Taking linger ping
as an example:

    handle_timeout thread                     handle_reply thread

                                              down_read(&osdc->lock)
                                              req = lookup_request(...)
                                              ...
                                              finish_request(req)  # unregisters
                                              up_read(&osdc->lock)
                                              __complete_request(req)
                                                linger_ping_cb(req)

      # req->r_kref == 2 because handle_reply still holds its ref

    down_write(&osdc->lock)
    send_linger_ping(lreq)
      req = lreq->ping_req  # same req
      # cancel_linger_request is NOT
      # called - handle_reply already
      # unregistered
      request_reinit(req)
        WARN_ON(req->r_kref != 1)  # fires
        request_init(req)
          kref_init(req->r_kref)

                   # req->r_kref == 1 after kref_init

                                              ceph_osdc_put_request(req)
                                                kref_put(req->r_kref)

            # req->r_kref == 0 after kref_put, req is freed

        <further req initialization/use> !!!

This happens because send_linger_ping() always (re)uses the same OSD
request for watch ping requests, relying on cancel_linger_request() to
unregister it from the OSD client and rip its messages out from the
messenger.  send_linger() does the same for watch/notify registration
and watch reconnect requests.  Unfortunately cancel_request() doesn't
guarantee that after it returns the OSD client would be completely done
with the OSD request -- a ref could still be held and the callback (if
specified) could still be invoked too.

The original motivation for request_reinit() was inability to deal with
allocation failures in send_linger() and send_linger_ping().  Switching
to using osdc->req_mempool (currently only used by CephFS) respects that
and allows us to get rid of request_reinit().

Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
2022-05-18 21:21:05 +02:00
Ilya Dryomov dc9b0dc456 libceph: disambiguate cluster/pool full log message
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-04-25 10:45:15 +02:00
Jeff Layton 27884f4bce libceph: drop else branches in prepare_read_data{,_cont}
Just call set_in_bvec in the non-conditional part.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-03-01 18:26:36 +01:00
Ilya Dryomov 038b8d1d1a libceph: optionally use bounce buffer on recv path in crc mode
Both msgr1 and msgr2 in crc mode are zero copy in the sense that
message data is read from the socket directly into the destination
buffer.  We assume that the destination buffer is stable (i.e. remains
unchanged while it is being read to) though.  Otherwise, CRC errors
ensue:

  libceph: read_partial_message 0000000048edf8ad data crc 1063286393 != exp. 228122706
  libceph: osd1 (1)192.168.122.1:6843 bad crc/signature

  libceph: bad data crc, calculated 57958023, expected 1805382778
  libceph: osd2 (2)192.168.122.1:6876 integrity error, bad crc

Introduce rxbounce option to enable use of a bounce buffer when
receiving message data.  In particular this is needed if a mapped
image is a Windows VM disk, passed to QEMU.  Windows has a system-wide
"dummy" page that may be mapped into the destination buffer (potentially
more than once into the same buffer) by the Windows Memory Manager in
an effort to generate a single large I/O [1][2].  QEMU makes a point of
preserving overlap relationships when cloning I/O vectors, so krbd gets
exposed to this behaviour.

[1] "What Is Really in That MDL?"
    https://docs.microsoft.com/en-us/previous-versions/windows/hardware/design/dn614012(v=vs.85)
[2] https://blogs.msmvps.com/kernelmustard/2005/05/04/dummy-pages/

URL: https://bugzilla.redhat.com/show_bug.cgi?id=1973317
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
2022-02-02 18:50:36 +01:00
Ilya Dryomov 2ea8871636 libceph: make recv path in secure mode work the same as send path
The recv path of secure mode is intertwined with that of crc mode.
While it's slightly more efficient that way (the ciphertext is read
into the destination buffer and decrypted in place, thus avoiding
two potentially heavy memory allocations for the bounce buffer and
the corresponding sg array), it isn't really amenable to changes.
Sacrifice that edge and align with the send path which always uses
a full-sized bounce buffer (currently there is no other way -- if
the kernel crypto API ever grows support for streaming (piecewise)
en/decryption for GCM [1], we would be able to easily take advantage
of that on both sides).

[1] https://lore.kernel.org/all/20141225202830.GA18794@gondor.apana.org.au/

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
2022-02-02 18:50:36 +01:00
Linus Torvalds 64f29d8856 The highlight is the new mount "device" string syntax implemented
by Venky Shankar.  It solves some long-standing issues with using
 different auth entities and/or mounting different CephFS filesystems
 from the same cluster, remounting and also misleading /proc/mounts
 contents.  The existing syntax of course remains to be maintained.
 
 On top of that, there is a couple of fixes for edge cases in quota
 and a new mount option for turning on unbuffered I/O mode globally
 instead of on a per-file basis with ioctl(CEPH_IOC_SYNCIO).
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmHpP5ATHGlkcnlvbW92
 QGdtYWlsLmNvbQAKCRBKf944AhHzi0TgB/480i2lPHgA3ujJNqo5Q6z+W0vtTA2+
 Wx+4rAUgIESJVunbFxvecPbzyUXTe7wWFI11TCVHPpf6GyIIDTD+uHd3kKWtLsfL
 Zkk1/2PN9Q5Dh29R+N8rP9NaP8tIaTQjyiO3iqmRZlo+k0Z/lYtWUb+fUP05XlVY
 ML/ktW543tkKeYwl3SWdW5MqAAOVGDbTt+L51CraDhVoiUac5ptkP+cmDmIqsnGa
 ZHVqpwugxgndEIyuBHDLBps+5/LrEaL10xDhGcMtP9hwGYhyNr6Yj+azfGtHWwOi
 jdVsdHDiecUBVtGyZ351Y4pCMOmP0uJif6MOUZFXYYSSeUBUhH8UjgEi
 =jcte
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "The highlight is the new mount "device" string syntax implemented by
  Venky Shankar. It solves some long-standing issues with using
  different auth entities and/or mounting different CephFS filesystems
  from the same cluster, remounting and also misleading /proc/mounts
  contents. The existing syntax of course remains to be maintained.

  On top of that, there is a couple of fixes for edge cases in quota and
  a new mount option for turning on unbuffered I/O mode globally instead
  of on a per-file basis with ioctl(CEPH_IOC_SYNCIO)"

* tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-client:
  ceph: move CEPH_SUPER_MAGIC definition to magic.h
  ceph: remove redundant Lsx caps check
  ceph: add new "nopagecache" option
  ceph: don't check for quotas on MDS stray dirs
  ceph: drop send metrics debug message
  rbd: make const pointer spaces a static const array
  ceph: Fix incorrect statfs report for small quota
  ceph: mount syntax module parameter
  doc: document new CephFS mount device syntax
  ceph: record updated mon_addr on remount
  ceph: new device mount syntax
  libceph: rename parse_fsid() to ceph_parse_fsid() and export
  libceph: generalize addr/ip parsing based on delimiter
2022-01-20 13:46:20 +02:00
Michal Hocko a421ef3030 mm: allow !GFP_KERNEL allocations for kvmalloc
Support for GFP_NO{FS,IO} and __GFP_NOFAIL has been implemented by
previous patches so we can allow the support for kvmalloc.  This will
allow some external users to simplify or completely remove their
helpers.

GFP_NOWAIT semantic hasn't been supported so far but it hasn't been
explicitly documented so let's add a note about that.

ceph_kvmalloc is the first helper to be dropped and changed to kvmalloc.

Link: https://lkml.kernel.org/r/20211122153233.9924-5-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 16:30:29 +02:00
Venky Shankar 4153c7fc93 libceph: rename parse_fsid() to ceph_parse_fsid() and export
... as it is too generic. also, use __func__ when logging
rather than hardcoding the function name.

Signed-off-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-01-13 13:40:06 +01:00
Venky Shankar 2d7c86a8f9 libceph: generalize addr/ip parsing based on delimiter
... and remove hardcoded function name in ceph_parse_ips().

[ idryomov: delim parameter, drop CEPH_ADDR_PARSE_DEFAULT_DELIM ]

Signed-off-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-01-13 13:40:05 +01:00
Luís Henriques aca39d9e86 libceph, ceph: move ceph_osdc_copy_from() into cephfs code
This patch moves ceph_osdc_copy_from() function out of libceph code into
cephfs.  There are no other users for this function, and there is the need
(in another patch) to access internal ceph_osd_request struct members.

Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-11-08 03:29:52 +01:00
Jean Sacren a341131eb3 libceph: drop ->monmap and err initialization
Call to build_initial_monmap() is one stone two birds.  Explicitly it
initializes err variable. Implicitly it initializes ->monmap via call to
kzalloc().  We should only declare err and ->monmap is taken care of by
ceph_monc_init() prototype.

Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-11-08 03:29:51 +01:00
Baokun Li dc915ecde8 libceph: fix doc warnings in cls_lock_client.c
Add description to fix the following W=1 kernel build warnings:

 net/ceph/cls_lock_client.c:28: warning: Function parameter or
  member 'osdc' not described in 'ceph_cls_lock'
 net/ceph/cls_lock_client.c:28: warning: Function parameter or
  member 'oid' not described in 'ceph_cls_lock'
 net/ceph/cls_lock_client.c:28: warning: Function parameter or
  member 'oloc' not described in 'ceph_cls_lock'

[ idryomov: tweak osdc description ]

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-06-28 23:49:25 +02:00
zuoqilin da6ebb4d67 libceph: remove unnecessary ret variable in ceph_auth_init()
There is no necessary to define variable assignment, just return
directly to simplify the steps.

Signed-off-by: zuoqilin <zuoqilin@yulong.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-06-28 23:49:25 +02:00
Zheng Yongjun 1e6de263d1 libceph: fix some spelling mistakes
Fix some spelling mistakes in comments:

- enconding ==> encoding
- ambigous ==> ambiguous
- orignal ==> original
- encyption ==> encryption

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-06-28 23:49:25 +02:00