I added $(srctree)/ to some included Makefiles in the following commits:
- 3204a7fb98 ("kbuild: prefix $(srctree)/ to some included Makefiles")
- d828563955 ("kbuild: do not require sub-make for separate output tree builds")
They were a preparation for removing --include-dir flag.
I have never thought --include-dir useful. Rather, it _is_ harmful.
For example, run the following commands:
$ make -s ARCH=x86 mrproper defconfig
$ make ARCH=arm O=foo dtbs
make[1]: Entering directory '/tmp/linux/foo'
HOSTCC scripts/basic/fixdep
Error: kernelrelease not valid - run 'make prepare' to update it
UPD include/config/kernel.release
make[1]: Leaving directory '/tmp/linux/foo'
The first command configures the source tree for x86. The next command
tries to build ARM device trees in the separate foo/ directory - this
must stop because the directory foo/ has not been configured yet.
However, due to --include-dir=$(abs_srctree), the top Makefile includes
the wrong include/config/auto.conf from the source tree and continues
building. Kbuild traverses the directory tree, but of course it does
not work correctly. The Error message is also pointless - 'make prepare'
does not help at all for fixing the issue.
This commit fixes more arch Makefile, and finally removes --include-dir
from the top Makefile.
There are more breakages under drivers/, but I do not volunteer to fix
them all. I just moved --include-dir to drivers/Makefile.
With this commit, the second command will stop with a sensible message.
$ make -s ARCH=x86 mrproper defconfig
$ make ARCH=arm O=foo dtbs
make[1]: Entering directory '/tmp/linux/foo'
SYNC include/config/auto.conf.cmd
***
*** The source tree is not clean, please run 'make ARCH=arm mrproper'
*** in /tmp/linux
***
make[2]: *** [../Makefile:646: outputmakefile] Error 1
/tmp/linux/Makefile:770: include/config/auto.conf.cmd: No such file or directory
make[1]: *** [/tmp/linux/Makefile:793: include/config/auto.conf.cmd] Error 2
make[1]: Leaving directory '/tmp/linux/foo'
make: *** [Makefile:226: __sub-make] Error 2
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Documentation/kbuild/makefiles.rst suggests to use "archclean" for
cleaning arch/$(SRCARCH)/boot/, but it is not a hard requirement.
Since commit d92cc4d516 ("kbuild: require all architectures to have
arch/$(SRCARCH)/Kbuild"), we can use the "subdir- += boot" trick for
all architectures. This can take advantage of the parallel option (-j)
for "make clean".
I also cleaned up the comments in arch/$(SRCARCH)/Makefile. The "archdep"
target no longer exists.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Commit 26bff9eb49 ("MIPS: Only include the platformfile needed")
moves platform-(CONFIG_XYZ) from arch/mips/xyz/Platform to arch/mips/
Kbuild.platforms. This change causes an error when "make clean":
./scripts/Makefile.clean:15: arch/mips/vr41xx/Makefile: No such file or directory
make[3]: *** No rule to make target `arch/mips/vr41xx/Makefile'. Stop.
make[2]: *** [arch/mips/vr41xx] Error 2
make[1]: *** [_clean_arch/mips] Error 2
make: *** [sub-make] Error 2
Clean-files are defined in arch/mips/Kbuild:
obj- := $(platform-)
Due to the movement of platform-(CONFIG_XYZ), "make clean" will enter
arch/mips/vr41xx/ whether CONFIG_MACH_VR41XX is defined or not. Because
there is no Makefile in arch/mips/vr41xx/, "make clean" fails. I don't
know what is the best way to fix it, but it seems like we can avoid this
error by changing the obj- definition:
obj- := $(platform-y)
Fixes: 26bff9eb49 ("MIPS: Only include the platformfile needed")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add an initial implementation of a proper (i.e. an ELF shared library)
VDSO. With this commit it does not export any symbols, it only replaces
the current signal return trampoline page. A later commit will add user
implementations of gettimeofday()/clock_gettime().
To support both new toolchains and old ones which don't generate ABI
flags section, we define its content manually and then use a tool
(genvdso) to patch up the section to have the correct name and type.
genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the
kernel, and generates a C file containing a "struct mips_vdso_image"
containing both the VDSO data and these offsets. This C file is
compiled into the kernel.
On 64-bit kernels we require a different VDSO for each supported ABI,
so we may build up to 3 different VDSOs. The VDSO to use is selected by
the mips_abi structure.
A kernel/user shared data page is created and mapped below the VDSO
image. This is currently empty, but will be used by the user time
function implementations which are added later.
[markos.chandras@imgtec.com:
- Add more comments
- Move abi detection in genvdso.h since it's the get_symbol function
that needs it.
- Add an R6 specific way to calculate the base address of VDSO in order
to avoid the branch instruction which affects performance.
- Do not patch .gnu.attributes since it's not needed for dynamic linking.
- Simplify Makefile a little bit.
- checkpatch fixes
- Restrict VDSO support for binutils < 2.25 for pre-R6
- Include atomic64.h for O32 variant on MIPS64]
Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: Matthew Fortune <matthew.fortune@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11337/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This adds initial support for BPF-JIT on MIPS
Tested on mips32 LE/BE and mips64 BE/n64 using
dhcp, ping and various tcpdump filters.
Benchmarking:
Assuming the remote MIPS target uses 192.168.154.181
as its IP address, and the local host uses 192.168.154.136,
the following results can be obtained using the following
tcpdump filter (catches no frames) and a simple
'time ping -f -c 1000000' command.
[root@(none) ~]# tcpdump -p -n -s 0 -i eth0 net 10.0.0.0/24 -d
(000) ldh [12]
(001) jeq #0x800 jt 2 jf 8
(002) ld [26]
(003) and #0xffffff00
(004) jeq #0xa000000 jt 16 jf 5
(005) ld [30]
(006) and #0xffffff00
(007) jeq #0xa000000 jt 16 jf 17
(008) jeq #0x806 jt 10 jf 9
(009) jeq #0x8035 jt 10 jf 17
(010) ld [28]
(011) and #0xffffff00
(012) jeq #0xa000000 jt 16 jf 13
(013) ld [38]
(014) and #0xffffff00
(015) jeq #0xa000000 jt 16 jf 17
(016) ret #65535
- BPF-JIT Disabled
real 1m38.005s
user 0m1.510s
sys 0m6.710s
- BPF-JIT Enabled
real 1m35.215s
user 0m1.200s
sys 0m4.140s
[ralf@linux-mips.org: Resolved conflict.]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
ieee754d.o contains only debug code and dp_sqrt.o and sp_sqrt.o contain
code which for MIPS I/II/III systems we don't want to link. Again the
savings can be considerable for some systems:
$ mips-linux-size --totals ieee754d.o dp_sqrt.o sp_sqrt.o
text data bss dec hex filename
1624 0 0 1624 658 ieee754d.o
2016 0 0 2016 7e0 dp_sqrt.o
736 0 0 736 2e0 sp_sqrt.o
4376 0 0 4376 1118 (TOTALS)
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
- Add the KVM option to MIPS build files.
- Add default config files for KVM host/guest kernels.
- Change the link address for the Malta KVM Guest kernel to UM (0x40100000).
- Add KVM Kconfig file with KVM/MIPS specific options
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When running make clean, Kbuild doesn't process the .config file, so nothing
generates a platform-y variable. We can get it to descend into the platform
directories by setting $(obj-).
The dec Platform file was unconditionally setting platform-, obliterating
its previous contents and preventing some directories from being cleaned.
This is change to an append operation '+=' to allow cavium-octeon to be
cleaned.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Patchwork: https://patchwork.linux-mips.org/patch/1718/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Move platform specific definitions to the platfrom directories.
Each platform shall do the following:
1) include an entry in arch/mips/Kbuild.platforms
2) add relevant definitions to arch/mips/<platform>/Platform
This commits changes ar7 to the new scheme as an example.
Introducing a platform speecific Platfrom file has following advantages:
1) decentralization of platfrom definitions
2) simplification af arch/mips/Makefile
3) force all platfrom to build with -Werror (done in arch/mips/Kbuild)
[Ralf: Remove forgotten -Werror from AR7 Makefile]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
To: linux-mips <linux-mips@linux-mips.org>
To: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1302/
Patchwork: http://patchwork.linux-mips.org/patch/1308/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Adding subdirs-ccflags-y := -Werror to arch/mips/Kbuild
let us in one go cover all files with -Werror.
In addition this allows us to remove the
individual -Werror definition in various Makefile.
Adding the definition to Kbuild as a recursive
option help us not to forget to do so.
With this change we now compile arch/mips/kernel/cpufreq with -Werror
One drawback:
When specifying a subdirectory covered by the Kbuild file like this:
make arch/mips/kernel/
then kbuild fails to pick up the -Werror definition.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
To: linux-mips <linux-mips@linux-mips.org>
To: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1301/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Masahiro Yamada