This introduces device managed versions of functions used to register
remoteproc devices, add support for remoteproc driver specific resource
control, enables remoteproc drivers to specify ELF class and machine for
coredumps. It integrates pm_runtime in the core for keeping resources
active while the remote is booted and holds a wake source while
recoverying a remote processor after a firmware crash.
It refactors the remoteproc device's allocation path to simplify the
logic, fix a few cleanup bugs and to not clone const strings onto the
heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a
zero-length array is replaced with flexible-array.
A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm
SM8250 gains support for audio, compute and sensor remoteprocs and the
Qualcomm SC7180 modem support is cleaned up and improved.
The Qualcomm glink subsystem-restart driver is merged into the main
glink driver, the Qualcomm sysmon driver is extended to properly notify
remote processors about all other remote processors' state transitions.
-----BEGIN PGP SIGNATURE-----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=4k54
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This introduces device managed versions of functions used to register
remoteproc devices, add support for remoteproc driver specific
resource control, enables remoteproc drivers to specify ELF class and
machine for coredumps. It integrates pm_runtime in the core for
keeping resources active while the remote is booted and holds a wake
source while recoverying a remote processor after a firmware crash.
It refactors the remoteproc device's allocation path to simplify the
logic, fix a few cleanup bugs and to not clone const strings onto the
heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a
zero-length array is replaced with flexible-array.
A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm
SM8250 gains support for audio, compute and sensor remoteprocs and the
Qualcomm SC7180 modem support is cleaned up and improved.
The Qualcomm glink subsystem-restart driver is merged into the main
glink driver, the Qualcomm sysmon driver is extended to properly
notify remote processors about all other remote processors' state
transitions"
* tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (43 commits)
remoteproc: Fix an error code in devm_rproc_alloc()
MAINTAINERS: Add myself as reviewer for Ingenic rproc driver
remoteproc: ingenic: Added remoteproc driver
remoteproc: Add support for runtime PM
dt-bindings: Document JZ47xx VPU auxiliary processor
remoteproc: wcss: Fix arguments passed to qcom_add_glink_subdev()
remoteproc: Fix and restore the parenting hierarchy for vdev
remoteproc: Fall back to using parent memory pool if no dedicated available
remoteproc: Replace zero-length array with flexible-array
remoteproc: wcss: add support for rpmsg communication
remoteproc: core: Prevent system suspend during remoteproc recovery
remoteproc: qcom_q6v5_mss: Remove unused q6v5_da_to_va function
remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use
remoteproc: qcom_q6v5_mss: Drop accesses to MPSS PERPH register space
dt-bindings: remoteproc: qcom: Replace halt-nav with spare-regs
remoteproc: qcom: pas: Add SM8250 PAS remoteprocs
dt-bindings: remoteproc: qcom: pas: Add SM8250 remoteprocs
remoteproc: qcom_q6v5_mss: Extract mba/mpss from memory-region
dt-bindings: remoteproc: qcom: Use memory-region to reference memory
remoteproc: qcom: pas: Add SC7180 Modem support
...
These are updates to SoC specific drivers that did not have
another subsystem maintainer tree to go through for some
reason:
- Some bus and memory drivers for the MIPS P5600 based
Baikal-T1 SoC that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3,
Qualcomm MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas
RZ/G1H, and Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC
as a transport.
- Mediatek platforms now use a new driver for their "MMSYS"
hardware block that controls clocks and some other aspects
in behalf of the media and gpu drivers.
- Some Tegra processors have improved power management
support, including getting woken up by the PMIC and cluster
power down during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon,
Mediatek, and Tegra.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=44Jc
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM/SoC driver updates from Arnd Bergmann:
"These are updates to SoC specific drivers that did not have another
subsystem maintainer tree to go through for some reason:
- Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3, Qualcomm
MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC as a
transport.
- Mediatek platforms now use a new driver for their "MMSYS" hardware
block that controls clocks and some other aspects in behalf of the
media and gpu drivers.
- Some Tegra processors have improved power management support,
including getting woken up by the PMIC and cluster power down
during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
Tegra"
* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
clk: sprd: fix compile-testing
bus: bt1-axi: Build the driver into the kernel
bus: bt1-apb: Build the driver into the kernel
bus: bt1-axi: Use sysfs_streq instead of strncmp
bus: bt1-axi: Optimize the return points in the driver
bus: bt1-apb: Use sysfs_streq instead of strncmp
bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
bus: bt1-apb: Fix show/store callback identations
bus: bt1-apb: Include linux/io.h
dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
memory: Add Baikal-T1 L2-cache Control Block driver
bus: Add Baikal-T1 APB-bus driver
bus: Add Baikal-T1 AXI-bus driver
dt-bindings: bus: Add Baikal-T1 APB-bus binding
dt-bindings: bus: Add Baikal-T1 AXI-bus binding
staging: tegra-video: fix V4L2 dependency
tee: fix crypto select
drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
soc: ti: add k3 platforms chipid module driver
dt-bindings: soc: ti: add binding for k3 platforms chipid module
...
The Qualcomm SPM cpuidle driver seems to be the last driver still
using the generic ARM CPUidle infrastructure.
Converting it actually allows us to simplify the driver,
and we end up being able to remove more lines than adding new ones:
- We can parse the CPUidle states in the device tree directly
with dt_idle_states (and don't need to duplicate that
functionality into the spm driver).
- Each "saw" device managed by the SPM driver now directly
registers its own cpuidle driver, removing the need for
any global (per cpu) state.
The device tree binding is the same, so the driver stays
compatible with all old device trees.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Attempting to compile rpmh-rsc.c as a module with TRACING enabled causes
a build error as no _rcuidle function is generated for tracepoints when
CONFIG_MODULE is set.
Attempts has been made, but no resolution has been agreed upon, so lets
revert this commit for now.
This reverts commit 1d3c6f86fd.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
It has been postulated that the pm_lock is bad for performance because
a CPU currently running rpmh_flush() could block other CPUs from
coming out of idle. Similarly CPUs coming out of / going into idle
all need to contend with each other for the spinlock just to update
the variable tracking who's in PM.
Let's optimize this a bit. Specifically:
- Use a count rather than a bitmask. This is faster to access and
also means we can use the atomic_inc_return() function to really
detect who the last one to enter PM was.
- Accept that it's OK if we race and are doing the flush (because we
think we're last) while another CPU is coming out of idle. As long
as we block that CPU if/when it tries to do an active-only transfer
we're OK.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200504104917.v6.5.I295cb72bc5334a2af80313cbe97cb5c9dcb1442c@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The rpmh-rsc code had both a driver-level lock (sometimes referred to
in comments as drv->lock) and a lock per-TCS. The idea was supposed
to be that there would be times where you could get by with just
locking a TCS lock and therefor other RPMH users wouldn't be blocked.
The above didn't work out so well.
Looking at tcs_write() the bigger drv->lock was held for most of the
function anyway. Only the __tcs_buffer_write() and
__tcs_set_trigger() calls were called without holding the drv->lock.
It actually turns out that in tcs_write() we don't need to hold the
drv->lock for those function calls anyway even if the per-TCS lock
isn't there anymore. From the newly added comments in the code, this
is because:
- We marked "tcs_in_use" under lock.
- Once "tcs_in_use" has been marked nobody else could be writing
to these registers until the interrupt goes off.
- The interrupt can't go off until we trigger w/ the last line
of __tcs_set_trigger().
Thus, from a tcs_write() point of view, the per-TCS lock was useless.
Looking at rpmh_rsc_write_ctrl_data(), only the per-TCS lock was held.
It turns out, though, that this function already needs to be called
with the equivalent of the drv->lock held anyway (we either need to
hold drv->lock as we will in a future patch or we need to know no
other CPUs could be running as happens today). Specifically
rpmh_rsc_write_ctrl_data() might be writing to a TCS that has been
borrowed for writing an active transation but it never checks this.
Let's eliminate this extra overhead and avoid possible AB BA locking
headaches.
Suggested-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200504104917.v6.4.Ib8dccfdb10bf6b1fb1d600ca1c21d9c0db1ef746@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
When a PM Notifier returns NOTIFY_BAD it doesn't get called with
CPU_PM_ENTER_FAILED. It only get called for CPU_PM_ENTER_FAILED if
someone else (further down the notifier chain) returns NOTIFY_BAD.
Handle this case by taking our CPU out of the list of ones that have
entered PM. Without this it's possible we could detect that the last
CPU went down (and we would flush) even if some CPU was alive. That's
not good since our flushing routines currently assume they're running
on the last CPU for mutual exclusion.
Fixes: 985427f997 ("soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200504104917.v6.2.I1927d1bca2569a27b2d04986baf285027f0818a2@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Our switch statement doesn't have entries for CPU_CLUSTER_PM_ENTER,
CPU_CLUSTER_PM_ENTER_FAILED, and CPU_CLUSTER_PM_EXIT and doesn't have
a default. This means that we'll try to do a flush in those cases but
we won't necessarily be the last CPU down. That's not so ideal since
our (lack of) locking assumes we're on the last CPU.
Luckily this isn't as big a problem as you'd think since (at least on
the SoC I tested) we don't get these notifications except on full
system suspend. ...and on full system suspend we get them on the last
CPU down. That means that the worst problem we hit is flushing twice.
Still, it's good to make it correct.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: 985427f997 ("soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200504104917.v6.1.Ic7096b3b9b7828cdd41cd5469a6dee5eb6abf549@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
We can make some of the register access functions more readable by
factoring out the calculations a little bit.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200415095953.v3.1.Ic70288f256ff0be65cac6a600367212dfe39f6c9@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch adds missing SoC IDs for MSM8936/39 and
their APQ variants.
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200511212733.214464-1-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In all but the very special case of a system with _only_ glink_rpm,
GLINK is dependent on glink_ssr, so move it to rpmsg and combine it with
qcom_glink_native in the new qcom_glink kernel module.
Acked-by: Chris Lew <clew@codeaurora.org>
Acked-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/20200423003736.2027371-4-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Rather than carrying a special purpose blocking notifier for glink_ssr
in remoteproc's qcom_common.c, move it into glink_ssr so allow wider
reuse of the common one.
The rpmsg glink header file is used in preparation for the next patch.
Acked-by: Chris Lew <clew@codeaurora.org>
Acked-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/20200423003736.2027371-3-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The patch fbe639b44a82: "soc: qcom: Introduce Protection Domain
Restart helpers" leads to the following static checker warning:
drivers/soc/qcom/pdr_interface.c:158 pdr_register_listener()
'(resp.curr_state < (-((~0 >> 1)) - 1)) => (s32min-s32max < s32min)'
These are casted to int so they can't be outside of int range.
Fixes: fbe639b44a ("soc: qcom: Introduce Protection Domain Restart helpers")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200415062955.21439-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Adding an item into the cache should never be able to make the cache
cleaner. Use "|=" rather than "=" to update the dirty flag.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org> Thanks, Maulik
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: bb7000677a ("soc: qcom: rpmh: Update dirty flag only when data changes")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200417141531.1.Ia4b74158497213eabad7c3d474c50bfccb3f342e@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Read the slv_id properly by making sure the 16-bit number is endian
swapped from little endian to CPU native before we read it to figure out
what to print for the human readable name. Otherwise we may just show
that all the elements in the cmd-db are "Unknown" which isn't right.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200417000645.234693-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The top few bits aren't relevant to pad out because they're always zero.
Let's just print 5 digits instead of 8 so that it's a little shorter and
more readable.
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Suggested-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200415192916.78339-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
We pass the result of sizeof() here to tell the printk format specifier
how many bytes to print. That expects an int though and sizeof() isn't
that type. Cast to int to silence this warning:
drivers/soc/qcom/cmd-db.c: In function 'cmd_db_debugfs_dump':
drivers/soc/qcom/cmd-db.c:281:30: warning: field width specifier '*' expects argument of type 'int', but argument 4 has type 'long unsigned int' [-Wformat=]
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Fixes: d6815c5c43 ("soc: qcom: cmd-db: Add debugfs dumping file")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200415062033.66406-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch allow the rpmpd driver to be loaded as a permenent
module. Meaning it can be loaded from a module, but then cannot
be unloaded.
Ideally, it would include a remove hook and related logic, but
apparently the genpd code isn't able to track usage and cleaning
things up? (See: https://lkml.org/lkml/2019/1/24/38)
So making it a permenent module at least improves things slightly
over requiring it to be a built in driver.
Cc: Todd Kjos <tkjos@google.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Acked-by: Saravana Kannan <saravanak@google.com>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200326224459.105170-2-john.stultz@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch allow the rpmhpd driver to be loaded as a permenent
module. Meaning it can be loaded from a module, but then cannot
be unloaded.
Ideally, it would include a remove hook and related logic, but
apparently the genpd code isn't able to track usage and cleaning
things up?
So making it a permenent module at least improves things slightly
over requiring it to be a built in driver.
Cc: Todd Kjos <tkjos@google.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Acked-by: Saravana Kannan <saravanak@google.com>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200326224459.105170-4-john.stultz@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch allow the rpmh driver to be loaded as a permenent
module. Meaning it can be loaded from a module, but then cannot
be unloaded.
Ideally, it would include a remove hook and related logic, but
the rpmh driver is fairly core to the system, so once its loaded
with almost anythign else to get the system to go, the dependencies
are not likely to ever also be removed.
So making it a permenent module at least improves things slightly
over requiring it to be a built in driver.
Acked-by: Saravana Kannan <saravanak@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200326224459.105170-3-john.stultz@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The RSC_DRV_IRQ_ENABLE, RSC_DRV_IRQ_STATUS, and RSC_DRV_IRQ_CLEAR
registers are not part of TCS 0. Let's not pretend that they are by
using read_tcs_reg() and write_tcs_reg() and passing a bogus tcs_id of
0. We could introduce a new wrapper for these registers but it
wouldn't buy us much. Let's just read/write directly.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.10.I2adf93809c692d0b673e1a86ea97c45644aa8d97@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Auditing tcs_invalidate() made me worried. Specifically I saw that it
used spin_lock(), not spin_lock_irqsave(). That always worries me
unless I can trace for sure that I'm in the interrupt handler or that
someone else already disabled interrupts.
Looking more at it, there is actually no reason for these locks
anyway. Specifically the only reason you'd ever call
rpmh_rsc_invalidate() is if you cared that the sleep/wake TCSes were
empty. That means that they need to continue to be empty even after
rpmh_rsc_invalidate() returns. The only way that can happen is if the
caller already has done something to keep all other RPMH users out.
It should be noted that even though the caller is only worried about
making sleep/wake TCSes empty, they also need to worry about stopping
active-only transfers if they need to handle the case where
active-only transfers might borrow the wake TCS.
At the moment rpmh_rsc_invalidate() is only called in PM code from the
last CPU. If that later changes the caller will still need to solve
the above problems themselves, so these locks will never be useful.
Continuing to audit tcs_invalidate(), I found a bug. The function
didn't properly check for a borrowed TCS if we hadn't recently written
anything into the TCS. Specifically, if we've never written to the
WAKE_TCS (or we've flushed it recently) then tcs->slots is empty.
We'll early-out and we'll never call tcs_is_free().
I thought about fixing this bug by either deleting the early check for
bitmap_empty() or possibly only doing it if we knew we weren't on a
TCS that could be borrowed. However, I think it's better to just
delete the checks.
As argued above it's up to the caller to make sure that all other
users of RPMH are quiet before tcs_invalidate() is called. Since
callers need to handle the zero-active-TCS case anyway that means they
need to make sure that the active-only transfers are quiet before
calling too. The one way tcs_invalidate() gets called today is
through rpmh_rsc_cpu_pm_callback() which calls
rpmh_rsc_ctrlr_is_busy() to handle this. When we have another path to
get to tcs_invalidate() it will also need to come up with something
similar and it won't need this extra check either. If we later find
some code path that actually needs this check back in (and somehow
manages to be race free) we can always add it back in.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.9.I07c1f70e0e8f2dc0004bd38970b4e258acdc773e@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The calls rpmh_rsc_write_ctrl_data() and rpmh_rsc_send_data() are only
ever called from rpmh.c. We know that rpmh.c already error checked
the message. There's no reason to do it again in rpmh-rsc.
Suggested-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.8.I8e187cdfb7a31f5bb7724f1f937f2862ee464a35@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
tcs_is_free() had two checks in it: does the software think that the
TCS is free and does the hardware think that the TCS is free. I
couldn't figure out in which case the hardware could think that a TCS
was in-use but software thought it was free. Apparently there is no
case and the extra check can be removed. This apparently has already
been done in a downstream patch.
Suggested-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.7.Icf2213131ea652087f100129359052c83601f8b0@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
I've been pouring through the rpmh-rsc code and trying to understand
it. Document everything to the best of my ability. All documentation
here is strictly from code analysis--no actual knowledge of the
hardware was used. If something is wrong in here I either
misunderstood the code, had a typo, or the code has a bug in it
leading to my incorrect understanding.
In a few places here I have documented things that don't make tons of
sense. A future patch will try to address this. While this means I'm
adding comments / todos and then later fixing them in the series, it
seemed more urgent to get things documented first so that people could
understand the later patches.
Any comments I adjusted I also tried to make match kernel-doc better.
Specifically:
- kernel-doc says do not leave a blank line between the function
description and the arguments
- kernel-doc examples always have things starting w/ a capital and
ending with a period.
This should be a no-op. It's just comment changes.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200413100321.v4.6.I52653eb85d7dc8981ee0dafcd0b6cc0f273e9425@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The "cmd_cache" in RPMH wasn't terribly sensible. Specifically:
- The current code doesn't really detect "conflicts" properly any case
where the sequence being checked has more than one entry. One
simple way to see this in the current code is that if cmd[0].addr
isn't found then cmd[1].addr is never checked.
- The code attempted to use the "cmd_cache" to update an existing
message in a sleep/wake TCS with new data. The goal appeared to be
to update part of a TCS while leaving the rest of the TCS alone. We
never actually do this. We always fully invalidate and re-write
everything.
- If/when we try to optimize things to not fully invalidate / re-write
every time we update the TCSes we'll need to think it through very
carefully. Specifically requirement of find_match() that the new
sequence of addrs must match exactly the old sequence of addrs seems
inflexible. It's also not documented in rpmh_write() and
rpmh_write_batch(). In any case, if we do decide to require updates
to keep the exact same sequence and length then presumably the API
and data structures should be updated to understand groups more
properly. The current algorithm doesn't really keep track of the
length of the old sequence and there are several boundary-condition
bugs because of that. Said another way: if we decide to do
something like this in the future we should start from scratch and
thus find_match() isn't useful to keep around.
This patch isn't quite a no-op. Specifically:
- It should be a slight performance boost of not searching through so
many arrays.
- The old code would have done something useful in one case: it would
allow someone calling rpmh_write() to override the data that came
from rpmh_write_batch(). I don't believe that actually happens in
reality.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.5.I6d3d0a3ec810dc72ff1df3cbf97deefdcdeb8eef@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The get_tcs_of_type() function doesn't provide any value. It's not
conceptually difficult to access a value in an array, even if that
value is in a structure and we want a pointer to the value. Having
the function in there makes me feel like it's doing something fancier
like looping or searching. Remove it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.4.Ia348ade7c6ed1d0d952ff2245bc854e5834c8d9a@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
I was trying to write documentation for the functions in rpmh-rsc and
I got to tcs_ctrl_write(). The documentation for the function would
have been: "This is the core of rpmh_rsc_write_ctrl_data(); all the
caller does is error-check and then call this".
Having the error checks in a separate function doesn't help for
anything since:
- There are no other callers that need to bypass the error checks.
- It's less documenting. When I read tcs_ctrl_write() I kept
wondering if I need to handle cases other than ACTIVE_ONLY or cases
with more commands than could fit in a TCS. This is obvious when
the error checks and code are together.
- The function just isn't that long, so there's no problem
understanding the combined function.
Things were even more confusing because the two functions names didn't
make obvious (at least to me) their relationship.
Simplify by folding one function into the other.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.3.Ie88ce5ccfc0c6055903ccca5286ae28ed3b85ed3@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Perhaps it's just me, it took a really long time to understand what
the register layout of rpmh-rsc was just from the #defines. Let's add
a bunch of comments describing which blocks are part of other blocks.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200413100321.v4.2.Iaddc29b72772e6ea381238a0ee85b82d3903e5f2@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch makes two changes, both of which should be no-ops:
1. Make read_tcs_reg() / read_tcs_cmd() symmetric to write_tcs_reg() /
write_tcs_cmd().
2. Change the order of operations in the above functions to make it
more obvious to me what the math is doing. Specifically first you
want to find the right TCS, then the right register, and then
multiply by the command ID if necessary.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.1.I1b754137e8089e46cf33fc2ea270734ec3847ec4@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
When there are more than one WAKE TCS available and there is no dedicated
ACTIVE TCS available, invalidating all WAKE TCSes and waiting for current
transfer to complete in first WAKE TCS blocks using another free WAKE TCS
to complete current request.
Remove rpmh_rsc_invalidate() to happen from tcs_write() when WAKE TCSes
is re-purposed to be used for Active mode. Clear only currently used
WAKE TCS's register configuration.
Fixes: 2de4b8d33e (drivers: qcom: rpmh-rsc: allow active requests from wake TCS)
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-7-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
For RSCs that have sleep & wake TCS but no dedicated active TCS, wake
TCS can be re-purposed to send active requests. Once the active requests
are sent and response is received, the active mode configuration needs
to be cleared so that controller can use wake TCS for sending wake
requests.
Introduce enable_tcs_irq() to enable completion IRQ for repurposed TCSes.
Fixes: 2de4b8d33e (drivers: qcom: rpmh-rsc: allow active requests from wake TCS)
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
[mkshah: call enable_tcs_irq() within drv->lock, update commit message]
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-6-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add changes to invoke rpmh flush() from CPU PM notification.
This is done when the last the cpu is entering deep CPU idle
states and controller is not busy.
Controllers that have 'HW solver' mode like display RSC do not need
to register for CPU PM notification. They may be in autonomous mode
executing low power mode and do not require rpmh_flush() to happen
from CPU PM notification.
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-5-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
TCSes have previously programmed data when rpmh_flush() is called.
This can cause old data to trigger along with newly flushed.
Fix this by cleaning SLEEP and WAKE TCSes before new data is flushed.
With this there is no need to invoke rpmh_rsc_invalidate() call from
rpmh_invalidate().
Simplify rpmh_invalidate() by moving invalidate_batch() inside.
Fixes: 600513dfee ("drivers: qcom: rpmh: cache sleep/wake state requests")
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-4-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Currently rpmh ctrlr dirty flag is set for all cases regardless of data
is really changed or not. Add changes to update dirty flag when data is
changed to newer values. Update dirty flag everytime when data in batch
cache is updated since rpmh_flush() may get invoked from any CPU instead
of only last CPU going to low power mode.
Also move dirty flag updates to happen from within cache_lock and remove
unnecessary INIT_LIST_HEAD() call and a default case from switch.
Fixes: 600513dfee ("drivers: qcom: rpmh: cache sleep/wake state requests")
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Srinivas Rao L <lsrao@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-3-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The function platform_get_irq() can log an error already. Thus omit a
redundant message for the exception handling in the calling function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/eb92fcfb-6181-1f9d-2601-61e5231bd892@web.de
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Looks like SoC ID is not exported to sysfs for some reason.
This patch adds it!
This is mostly used by userspace libraries like Snapdragon
Neural Processing Engine (SNPE) SDK for checking supported SoC info.
Fixes: efb448d0a3 ("soc: qcom: Add socinfo driver")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200319121418.5180-1-srinivas.kandagatla@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
QCOM_APR selects QCOM_PDR_HELPERS, which in turn selects
QCOM_QMI_HELPERS, which depends on NET. So ensure that APR's
dependencies are met by making it depend on NET as well.
Fixes: 8347356626 ("soc: qcom: apr: Add avs/audio tracking functionality")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Use PDR helper functions to track the protection domains that the apr
services are dependent upon on SDM845 SoC, specifically the "avs/audio"
service running on ADSP Q6.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200312120842.21991-4-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Qualcomm SoCs (starting with MSM8998) allow for multiple protection domains
to run on the same Q6 sub-system. This allows for services like ATH10K WLAN
FW to have their own separate address space and crash/recover without
disrupting the modem and other PDs running on the same sub-system. The PDR
helpers introduces an abstraction that allows for tracking/controlling the
life cycle of protection domains running on various Q6 sub-systems.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200312120842.21991-2-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This is a single character that we're printing out. Use seq_putc() for
that to simplify the code.
Cc: Vaishali Thakkar <vaishali.thakkar@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200309185123.65265-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This tracepoint is hit now that we call into the rpmh code from the cpu
idle path. Let's move this to be an rcuidle tracepoint so that we avoid
the RCU idle splat below
=============================
WARNING: suspicious RCU usage
5.4.10 #68 Tainted: G S
-----------------------------
drivers/soc/qcom/trace-rpmh.h:72 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
RCU used illegally from idle CPU!
rcu_scheduler_active = 2, debug_locks = 1
RCU used illegally from extended quiescent state!
5 locks held by swapper/2/0:
#0: ffffff81745d6ee8 (&(&genpd->slock)->rlock){+.+.}, at: genpd_lock_spin+0x1c/0x2c
#1: ffffff81745da6e8 (&(&genpd->slock)->rlock/1){....}, at: genpd_lock_nested_spin+0x24/0x34
#2: ffffff8174f2ca20 (&(&genpd->slock)->rlock/2){....}, at: genpd_lock_nested_spin+0x24/0x34
#3: ffffff8174f2c300 (&(&drv->client.cache_lock)->rlock){....}, at: rpmh_flush+0x48/0x24c
#4: ffffff8174f2c150 (&(&tcs->lock)->rlock){+.+.}, at: rpmh_rsc_write_ctrl_data+0x74/0x270
stack backtrace:
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G S 5.4.10 #68
Call trace:
dump_backtrace+0x0/0x174
show_stack+0x20/0x2c
dump_stack+0xc8/0x124
lockdep_rcu_suspicious+0xe4/0x104
__tcs_buffer_write+0x230/0x2d0
rpmh_rsc_write_ctrl_data+0x210/0x270
rpmh_flush+0x84/0x24c
rpmh_domain_power_off+0x78/0x98
_genpd_power_off+0x40/0xc0
genpd_power_off+0x168/0x208
genpd_power_off+0x1e0/0x208
genpd_power_off+0x1e0/0x208
genpd_runtime_suspend+0x1ac/0x220
__rpm_callback+0x70/0xfc
rpm_callback+0x34/0x8c
rpm_suspend+0x218/0x4a4
__pm_runtime_suspend+0x88/0xac
psci_enter_domain_idle_state+0x3c/0xb4
cpuidle_enter_state+0xb8/0x284
cpuidle_enter+0x38/0x4c
call_cpuidle+0x3c/0x68
do_idle+0x194/0x260
cpu_startup_entry+0x24/0x28
secondary_start_kernel+0x150/0x15c
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Fixes: a65a397f24 ("cpuidle: psci: Add support for PM domains by using genpd")
Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200115013751.249588-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
QMI helpers are not always used by Qualcomm platforms. One of the
exceptions is the external modems available in near future.
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200220095854.4804-17-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In some device memory used by msm_qmp, there can be an early ack of a
write to memory succeeding. This may cause the outgoing interrupt to be
triggered before the msgram reflects the write.
Add a readback to ensure the data is flushed to device memory before
triggering the ipc interrupt.
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Link: https://lore.kernel.org/r/1579681454-1229-1-git-send-email-aneela@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
During the probe the task is waiting in TASK_UNINTERRUPTIBLE state which
cannot be woken-up by wake_up_interruptible_all() function.
Use wake_up_all() to wake-up both TASK_UNINTERRUPTIBLE and
TASK_INTERRUPTIBLE state tasks.
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Link: https://lore.kernel.org/r/1579681417-1155-1-git-send-email-aneela@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Linus Torvalds