A lot of the logic in invalidate_partitions and rescan_partitions is
shared. Merge the two functions to simplify things. There is a small
behavior change in that we now send the kevent change notice also if we
were not invalidating but no partitions were found, which seems like
the right thing to do.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split out a helper that adds one single partition, and another one
calling that dealing with the parsed_partitions state. This makes
it much more obvious how we clean up all state and start again when
using the rescan label.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 3726112ec7 ("block, bfq: re-schedule empty queues if
they deserve I/O plugging"), to prevent the service guarantees of a
bfq_queue from being violated, the bfq_queue may be left busy, i.e.,
scheduled for service, even if empty (see comments in
__bfq_bfqq_expire() for details). But, if no process will send
requests to the bfq_queue any longer, then there is no point in
keeping the bfq_queue scheduled for service.
In addition, keeping the bfq_queue scheduled for service, but with no
process reference any longer, may cause the bfq_queue to be freed when
descheduled from service. But this is assumed to never happen, and
causes a UAF if it happens. This, in turn, caused crashes [1, 2].
This commit fixes this issue by descheduling an empty bfq_queue when
it remains with not process reference.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1767539
[2] https://bugzilla.kernel.org/show_bug.cgi?id=205447
Fixes: 3726112ec7 ("block, bfq: re-schedule empty queues if they deserve I/O plugging")
Reported-by: Chris Evich <cevich@redhat.com>
Reported-by: Patrick Dung <patdung100@gmail.com>
Reported-by: Thorsten Schubert <tschubert@bafh.org>
Tested-by: Thorsten Schubert <tschubert@bafh.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Avoid the need to allocate a potentially large array of struct blk_zone
in the block layer by switching the ->report_zones method interface to
a callback model. Now the caller simply supplies a callback that is
executed on each reported zone, and private data for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No known partitioning tool supports zoned block devices, especially the
host managed flavor with strong sequential write constraints.
Furthermore, there are also no known user nor use cases for partitioned
zoned block devices.
This patch removes partition device creation for zoned block devices,
which allows simplifying the processing of zone commands for zoned
block devices. A warning is added if a partition table is found on the
device.
For report zones operations no zone sector information remapping is
necessary anymore, simplifying the code. Of note is that remapping of
zone reports for DM targets is still necessary as done by
dm_remap_zone_report().
Similarly, remaping of a zone reset bio is not necessary anymore.
Testing for the applicability of the zone reset all request also becomes
simpler and only needs to check that the number of sectors of the
requested zone range is equal to the disk capacity.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All kernel users of blkdev_report_zones() as well as applications use
through ioctl(BLKZONEREPORT) expect to potentially get less zone
descriptors than requested. As such, the use of the internal report
zones command execution loop implemented by blk_report_zones() is
not necessary and can even be harmful to performance by causing the
execution of inefficient small zones report command to service the
reminder of a requested zone array.
This patch removes blk_report_zones(), simplifying the code. Also
remove a now incorrect comment in dm_blk_report_zones().
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Javier Gonzalez <javier@javigon.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_revalidate_disk_zones is never called for non-zoned devices. Just
return early and warn instead of trying to handle this case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For ZBC and ZAC zoned devices, the scsi driver revalidation processing
implemented by sd_revalidate_disk() includes a call to
sd_zbc_read_zones() which executes a full disk zone report used to
check that all zones of the disk are the same size. This processing is
followed by a call to blk_revalidate_disk_zones(), used to initialize
the device request queue zone bitmaps (zone type and zone write lock
bitmaps). To do so, blk_revalidate_disk_zones() also executes a full
device zone report to obtain zone types. As a result, the entire
zoned block device revalidation process includes two full device zone
report.
By moving the zone size checks into blk_revalidate_disk_zones(), this
process can be optimized to a single full device zone report, leading to
shorter device scan and revalidation times. This patch implements this
optimization, reducing the original full device zone report implemented
in sd_zbc_check_zones() to a single, small, report zones command
execution to obtain the size of the first zone of the device. Checks
whether all zones of the device are the same size as the first zone
size are moved to the generic blk_check_zone() function called from
blk_revalidate_disk_zones().
This optimization also has the following benefits:
1) fewer memory allocations in the scsi layer during disk revalidation
as the potentailly large buffer for zone report execution is not
needed.
2) Implement zone checks in a generic manner, reducing the burden on
device driver which only need to obtain the zone size and check that
this size is a power of 2 number of LBAs. Any new type of zoned
block device will benefit from this.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
64K PAGE_SIZE is popular on ARM64 or other ARCHs, and 64K has been big
enough to break some devices probably, so change the logic to split bio
if the only bvec's length is > SZ_4K instead of PAGE_SIZE.
Fixes: fa53228721 (block: avoid blk_bio_segment_split for small I/O operations)
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some device may set segment boundary as PAGE_SIZE - 1. If the bvec
crosses pages, and meantime its length is <= PAGE_SIZE, we still need
to split the bvec into 2 segments.
Fixes this issue by still splitting bio if the single bvec crosses
pages.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: fa53228721 (block: avoid blk_bio_segment_split for small I/O operations)
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkg_rwstat is now only used by bfq-iosched and blk-throtl when on
cgroup1. Let's move it into its own files and gate it behind a config
option.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk-cgroup has been using blkg_rwstat to track basic IO stats.
Unfortunately, reading recursive stats scales badly as itinvolves
walking all descendants. On systems with a huge number of cgroups
(dead or alive), this can lead to substantial CPU cost when reading IO
stats.
This patch reimplements basic IO stats using cgroup rstat which uses
more memory but makes recursive stat reading O(# descendants which
have been active since last reading) instead of O(# descendants).
* blk-cgroup core no longer uses sync/async stats. Introduce new stat
enums - BLKG_IOSTAT_{READ|WRITE|DISCARD}.
* Add blkg_iostat[_set] which encapsulates byte and io stats, last
values for propagation delta calculation and u64_stats_sync for
correctness on 32bit archs.
* Update the new percpu stat counters directly and implement
blkcg_rstat_flush() to implement propagation.
* blkg_print_stat() can now bring the stats up to date by calling
cgroup_rstat_flush() and print them instead of directly summing up
all descendants.
* It now allocates 96 bytes per cpu. It used to be 40 bytes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Dan Schatzberg <dschatzberg@fb.com>
Cc: Daniel Xu <dlxu@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When used on cgroup1, blk-throtl uses the blkg->stat_bytes and
->stat_ios from blk-cgroup core to populate four stat knobs.
blk-cgroup core is moving away from blkg_rwstat to improve scalability
and won't be able to support this usage.
It isn't like the sharing gains all that much. Let's break them out
to dedicated rwstat counters which are updated when on cgroup1.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When used on cgroup1, bfq uses the blkg->stat_bytes and ->stat_ios
from blk-cgroup core to populate six stat knobs. blk-cgroup core is
moving away from blkg_rwstat to improve scalability and won't be able
to support this usage.
It isn't like the sharing gains all that much. Let's break it out to
dedicated rwstat counters which are updated when on cgroup1. This
makes use of bfqg_*rwstat*() helpers outside of
CONFIG_BFQ_CGROUP_DEBUG. Move them out.
v2: Compile fix when !CONFIG_BFQ_CGROUP_DEBUG.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Collect them right under #ifdef CONFIG_BFQ_CGROUP_DEBUG. The next
patch will use them from !DEBUG path and this makes it easy to move
them out of the ifdef block.
This is pure code reorganization.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull on for-linus to resolve what otherwise would have been a conflict
with the cgroups rstat patchset from Tejun.
* for-linus: (942 commits)
blkcg: make blkcg_print_stat() print stats only for online blkgs
nvme: change nvme_passthru_cmd64 to explicitly mark rsvd
nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths
nvme-rdma: fix a segmentation fault during module unload
iocost: don't nest spin_lock_irq in ioc_weight_write()
io_uring: ensure we clear io_kiocb->result before each issue
um-ubd: Entrust re-queue to the upper layers
nvme-multipath: remove unused groups_only mode in ana log
nvme-multipath: fix possible io hang after ctrl reconnect
io_uring: don't touch ctx in setup after ring fd install
io_uring: Fix leaked shadow_req
Linux 5.4-rc5
riscv: cleanup do_trap_break
nbd: verify socket is supported during setup
ata: libahci_platform: Fix regulator_get_optional() misuse
nbd: handle racing with error'ed out commands
nbd: protect cmd->status with cmd->lock
io_uring: fix bad inflight accounting for SETUP_IOPOLL|SETUP_SQTHREAD
io_uring: used cached copies of sq->dropped and cq->overflow
ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
...
Introduce three new ioctl commands BLKOPENZONE, BLKCLOSEZONE and
BLKFINISHZONE to allow applications to control the condition of zones
on a zoned block device through the execution of the REQ_OP_ZONE_OPEN,
REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH operations.
Contains contributions from Matias Bjorling, Hans Holmberg,
Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig.
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zoned block devices (ZBC and ZAC devices) allow an explicit control
over the condition (state) of zones. The operations allowed are:
* Open a zone: Transition to open condition to indicate that a zone will
actively be written
* Close a zone: Transition to closed condition to release the drive
resources used for writing to a zone
* Finish a zone: Transition an open or closed zone to the full
condition to prevent write operations
To enable this control for in-kernel zoned block device users, define
the new request operations REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE
and REQ_OP_ZONE_FINISH as well as the generic function
blkdev_zone_mgmt() for submitting these operations on a range of zones.
This results in blkdev_reset_zones() removal and replacement with this
new zone magement function. Users of blkdev_reset_zones() (f2fs and
dm-zoned) are updated accordingly.
Contains contributions from Matias Bjorling, Hans Holmberg,
Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig.
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no need for the function __blkdev_reset_all_zones() as
REQ_OP_ZONE_RESET_ALL can be handled directly in blkdev_reset_zones()
bio loop with an early break from the loop. This patch removes this
function and modifies blkdev_reset_zones(), simplifying the code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
REQ_OP_ZONE_RESET operations cannot be merged as these bios and requests
do not have a size and are never sequential due to the zone start sector
position required for their execution. As a result, there is no point in
using a plug around blkdev_reset_zones() bio issuing loop. This patch
removes this unnecessary plugging.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkcg_print_stat() iterates blkgs under RCU and doesn't test whether
the blkg is online. This can call into pd_stat_fn() on a pd which is
still being initialized leading to an oops.
The heaviest operation - recursively summing up rwstat counters - is
already done while holding the queue_lock. Expand queue_lock to cover
the other operations and skip the blkg if it isn't online yet. The
online state is protected by both blkcg and queue locks, so this
guarantees that only online blkgs are processed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Roman Gushchin <guro@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Fixes: 903d23f0a3 ("blk-cgroup: allow controllers to output their own stats")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With transition to blk-mq, the elevator= kernel argument was removed as
it makes less and less sense with the current variety of devices. Since
this may surprise some users and there are advices on the Internet that
still suggest to use it, let's at least warn if the parameter is used.
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__blk_queue_split() adds significant overhead for small I/O operations.
Add a shortcut to avoid it for cases where we know we never need to
split.
Based on a patch from Ming Lei.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
8962842ca5 ("blk-mq: avoid sysfs buffer overflow with too many CPU cores")
avoids sysfs buffer overflow, and reserves one character for line break.
However, the last snprintf() doesn't get correct 'size' parameter passed
in, so fixed it.
Fixes: 8962842ca5 ("blk-mq: avoid sysfs buffer overflow with too many CPU cores")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch introduces Opal Datastore UID.
The generic read/write table ioctl can use this UID
to access the Opal Datastore.
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This feature gives the user RW access to any opal table with admin1
authority. The flags described in the new structure determines if the user
wants to read/write the data. Flags are checked for valid values in
order to allow future features to be added to the ioctl.
The user can provide the desired table's UID. Also, the ioctl provides a
size and offset field and internally will loop data accesses to return
the full data block. Read overrun is prevented by the initiator's
sec_send_recv() backend. The ioctl provides a private field with the
intention to accommodate any future expansions to the ioctl.
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch refactors the existing "write_shadowmbr" func and
creates a new generalized function "generic_table_write_data",
to write data to any opal table. Also, a few cleanups are included
in this patch.
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is reported that sysfs buffer overflow can be triggered if the system
has too many CPU cores(>841 on 4K PAGE_SIZE) when showing CPUs of
hctx via /sys/block/$DEV/mq/$N/cpu_list.
Use snprintf to avoid the potential buffer overflow.
This version doesn't change the attribute format, and simply stops
showing CPU numbers if the buffer is going to overflow.
Cc: stable@vger.kernel.org
Fixes: 676141e48af7("blk-mq: don't dump CPU -> hw queue map on driver load")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 97889f9ac2 ("blk-mq: remove synchronize_rcu() from
blk_mq_del_queue_tag_set()"), the return value of blk_mq_run_hw_queue()
is never checked, so make it return void, which very marginally simplifies
the code.
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This code causes a static analysis warning:
block/blk-iocost.c:2113 ioc_weight_write() error: double lock 'irq'
We disable IRQs in blkg_conf_prep() and re-enable them in
blkg_conf_finish(). IRQ disable/enable should not be nested because
that means the IRQs will be enabled at the first unlock instead of the
second one.
Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only usage of the label "done" is when (rq->tag != -1) at the
beginning of the function. Rather than jumping to label, we can just
remove this label and execute the code at the "if". Besides that, the
code that would be executed after the label "done" is the return of the
logical expression (rq->tag != -1) but since we are already inside the
if, we now that this is true. Remove the label and replace the goto with
the proper result of the label.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of allocating an array of size nr_cpu_ids for set->tags, allocate
an array of size set->nr_hw_queues. This patch improves behavior that was
introduced by commit 868f2f0b72 ("blk-mq: dynamic h/w context count").
Reallocating tag sets from inside __blk_mq_update_nr_hw_queues() is safe
because:
- All request queues that share the tag sets are frozen before the tag sets
are reallocated.
- blk_mq_queue_tag_busy_iter() holds q->q_usage_counter while active and
hence is serialized against __blk_mq_update_nr_hw_queues().
Cc: Keith Busch <keith.busch@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of always allocating at least nr_cpu_ids hardware queues per request
queue, reallocate q->queue_hw_ctx if it has to grow. This patch improves
behavior that was introduced by commit 868f2f0b72 ("blk-mq: dynamic h/w
context count").
Cc: Keith Busch <keith.busch@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the blk_mq_{,un}freeze_queue() calls in __blk_mq_update_nr_hw_queues()
already serialize __blk_mq_update_nr_hw_queues() against
blk_mq_queue_tag_busy_iter(), the synchronize_rcu() call in
__blk_mq_update_nr_hw_queues() is not necessary. Hence remove it.
Note: the synchronize_rcu() call in __blk_mq_update_nr_hw_queues() was
introduced by commit f5bbbbe4d6 ("blk-mq: sync the update nr_hw_queues with
blk_mq_queue_tag_busy_iter"). Commit 530ca2c9bd ("blk-mq: Allow blocking
queue tag iter callbacks") removed the rcu_read_{,un}lock() calls that
correspond to the synchronize_rcu() call in __blk_mq_update_nr_hw_queues().
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are two code locations that implement the SG_IO ioctl: the old
sg.c driver, and the generic scsi_ioctl helper that is in turn used by
multiple drivers.
To eradicate the old compat_ioctl conversion handler for the SG_IO
command, I implement a readable pair of put_sg_io_hdr() /get_sg_io_hdr()
helper functions that can be used for both compat and native mode,
and then I call this from both drivers.
For the iovec handling, there is already a compat_import_iovec() function
that can simply be called in place of import_iovec().
To avoid having to pass the compat/native state through multiple
indirections, I mark the SG_IO command itself as compatible in
fs/compat_ioctl.c and use in_compat_syscall() to figure out where
we are called from.
As a side-effect of this, the sg.c driver now also accepts the 32-bit
sg_io_hdr format in compat mode using the read/write interface, not
just ioctl. This should improve compatiblity with old 32-bit binaries,
but it would break if any application intentionally passes the 64-bit
data structure in compat mode here.
Steffen Maier helped debug an issue in an earlier version of this patch.
Cc: Steffen Maier <maier@linux.ibm.com>
Cc: linux-scsi@vger.kernel.org
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
rq_qos_del() incorrectly assigns the node being deleted to the head if
it was the first on the list in the !prev path. Fix it by iterating
with ** instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Fixes: a79050434b ("blk-rq-qos: refactor out common elements of blk-wbt")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkcg_activate_policy() has the following bugs.
* cf09a8ee19 ("blkcg: pass @q and @blkcg into
blkcg_pol_alloc_pd_fn()") added @blkcg to ->pd_alloc_fn(); however,
blkcg_activate_policy() ends up using pd's allocated for the root
blkcg for all preallocations, so ->pd_init_fn() for non-root blkcgs
can be passed in pd's which are allocated for the root blkcg.
For blk-iocost, this means that ->pd_init_fn() can write beyond the
end of the allocated object as it determines the length of the flex
array at the end based on the blkcg's nesting level.
* Each pd is initialized as they get allocated. If alloc fails, the
policy will get freed with pd's initialized on it.
* After the above partial failure, the partial pds are not freed.
This patch fixes all the above issues by
* Restructuring blkcg_activate_policy() so that alloc and init passes
are separate. Init takes place only after all allocs succeeded and
on failure all allocated pds are freed.
* Unifying and fixing the cleanup of the remaining pd_prealloc.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: cf09a8ee19 ("blkcg: pass @q and @blkcg into blkcg_pol_alloc_pd_fn()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A BIO based request queue does not have a tag_set, which prevent testing
for the flag BLK_MQ_F_NO_SCHED indicating that the queue does not
require an elevator. This leads to an incorrect initialization of a
default elevator in some cases such as BIO based null_blk
(queue_mode == BIO) with zoned mode enabled as the default elevator in
this case is mq-deadline instead of "none".
Fix this by testing for a NULL queue mq_ops field which indicates that
the queue is BIO based and should not have an elevator.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Presently, passthrough requests are not accounted for because
blk_do_io_stat() expressly rejects them. Based on some digging
in the history, this doesn't seem like a concious decision but
one that evolved from the change from blk_fs_request() to
blk_rq_is_passthrough().
To support this, call blk_account_io_start() in blk_execute_rq_nowait()
and remove the passthrough check in blk_do_io_stat().
Link: https://lore.kernel.org/linux-block/20191010100526.GA27209@lst.de/
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_stat_add() calls {get,put}_cpu_ptr() in a loop, which entails
overhead of disabling/enabling preemption. The loop is under RCU
(i.e.short) anyway, so do get_cpu() in advance.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Store inflight counters immediately in struct mq_inflight.
That's type-safer and removes extra indirection.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reuse a more generic callback in both blk_mq_in_flight() and
blk_mq_in_flight_rw().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_request_completed() and blk_mq_request_started() are
short, inline it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since blk_cleanup_queue() is called after blk_unregister_queue() and
since that last function removes all sysfs attributes, serializing
any code in blk_cleanup_queue() against sysfs callback methods nor against
I/O scheduler changes is necessary. Hence remove the syfs_lock locking
calls from the start of blk_cleanup_queue().
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Block drivers must call del_gendisk() before blk_cleanup_queue().
del_gendisk() calls kobject_del() and kobject_del() waits until any
ongoing sysfs callback functions have finished. In other words, the
sysfs callback functions won't be called for a queue in the dying
state. Hence remove the "dying" checks from the sysfs callback
functions.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 897bb0c7f1 ("blk-mq: Use proper cpumask iterator"; v4.6)
removed the last use of request_queue.nr_queues from outside
blk_mq_init_allocate_queue(). Remove this member variable to make
struct request_queue smaller. This patch does not change any
functionality.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix the following kernel-doc warnings:
block/t10-pi.c:242: warning: Function parameter or member 'rq' not described in 't10_pi_type3_prepare'
block/t10-pi.c:249: warning: Function parameter or member 'rq' not described in 't10_pi_type3_complete'
block/t10-pi.c:249: warning: Function parameter or member 'nr_bytes' not described in 't10_pi_type3_complete'
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Fixes: 54d4e6ab91 ("block: centralize PI remapping logic to the block layer")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
scale_up wakes up waiters after scaling up. But after scaling max, it
should not wake up more waiters as waiters will not have anything to
do. This patch fixes this by making scale_up (and also scale_down)
return when threshold is reached.
This bug causes increased fdatasync latency when fdatasync and dd
conv=sync are performed in parallel on 4.19 compared to 4.14. This
bug was introduced during refactoring of blk-wbt code.
Fixes: a79050434b ("blk-rq-qos: refactor out common elements of blk-wbt")
Cc: stable@vger.kernel.org
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
sparse warns about incorrect type when using __be64 data.
It is not being converted to CPU-endian but it should be.
Fixes these sparse warnings:
../block/sed-opal.c:375:20: warning: incorrect type in assignment (different base types)
../block/sed-opal.c:375:20: expected unsigned long long [usertype] align
../block/sed-opal.c:375:20: got restricted __be64 const [usertype] alignment_granularity
../block/sed-opal.c:376:25: warning: incorrect type in assignment (different base types)
../block/sed-opal.c:376:25: expected unsigned long long [usertype] lowest_lba
../block/sed-opal.c:376:25: got restricted __be64 const [usertype] lowest_aligned_lba
Fixes: 455a7b238c ("block: Add Sed-opal library")
Cc: Scott Bauer <scott.bauer@intel.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: linux-block@vger.kernel.org
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some HDD drive may expose multiple hardware queues, such as MegraRaid.
Let's apply the normal plugging for such devices because sequential IO
may benefit a lot from plug merging.
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a device is using multiple queues, the IO scheduler may be bypassed.
This may hurt performance for some slow MQ devices, and it also breaks
zoned devices which depend on mq-deadline for respecting the write order
in one zone.
Don't bypass io scheduler if we have one setup.
This patch can double sequential write performance basically on MQ
scsi_debug when mq-deadline is applied.
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We got a null pointer deference BUG_ON in blk_mq_rq_timed_out()
as following:
[ 108.825472] BUG: kernel NULL pointer dereference, address: 0000000000000040
[ 108.827059] PGD 0 P4D 0
[ 108.827313] Oops: 0000 [#1] SMP PTI
[ 108.827657] CPU: 6 PID: 198 Comm: kworker/6:1H Not tainted 5.3.0-rc8+ #431
[ 108.829503] Workqueue: kblockd blk_mq_timeout_work
[ 108.829913] RIP: 0010:blk_mq_check_expired+0x258/0x330
[ 108.838191] Call Trace:
[ 108.838406] bt_iter+0x74/0x80
[ 108.838665] blk_mq_queue_tag_busy_iter+0x204/0x450
[ 108.839074] ? __switch_to_asm+0x34/0x70
[ 108.839405] ? blk_mq_stop_hw_queue+0x40/0x40
[ 108.839823] ? blk_mq_stop_hw_queue+0x40/0x40
[ 108.840273] ? syscall_return_via_sysret+0xf/0x7f
[ 108.840732] blk_mq_timeout_work+0x74/0x200
[ 108.841151] process_one_work+0x297/0x680
[ 108.841550] worker_thread+0x29c/0x6f0
[ 108.841926] ? rescuer_thread+0x580/0x580
[ 108.842344] kthread+0x16a/0x1a0
[ 108.842666] ? kthread_flush_work+0x170/0x170
[ 108.843100] ret_from_fork+0x35/0x40
The bug is caused by the race between timeout handle and completion for
flush request.
When timeout handle function blk_mq_rq_timed_out() try to read
'req->q->mq_ops', the 'req' have completed and reinitiated by next
flush request, which would call blk_rq_init() to clear 'req' as 0.
After commit 12f5b93145 ("blk-mq: Remove generation seqeunce"),
normal requests lifetime are protected by refcount. Until 'rq->ref'
drop to zero, the request can really be free. Thus, these requests
cannot been reused before timeout handle finish.
However, flush request has defined .end_io and rq->end_io() is still
called even if 'rq->ref' doesn't drop to zero. After that, the 'flush_rq'
can be reused by the next flush request handle, resulting in null
pointer deference BUG ON.
We fix this problem by covering flush request with 'rq->ref'.
If the refcount is not zero, flush_end_io() return and wait the
last holder recall it. To record the request status, we add a new
entry 'rq_status', which will be used in flush_end_io().
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: stable@vger.kernel.org # v4.18+
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
-------
v2:
- move rq_status from struct request to struct blk_flush_queue
v3:
- remove unnecessary '{}' pair.
v4:
- let spinlock to protect 'fq->rq_status'
v5:
- move rq_status after flush_running_idx member of struct blk_flush_queue
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have updated limits after calling wbt_set_min_lat(). No need to
update again.
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The default hard disk param sets latency targets at 50ms. As the
default target percentiles are zero, these don't directly regulate
vrate; however, they're still used to calculate the period length -
100ms in this case.
This is excessively low. A SATA drive with QD32 saturated with random
IOs can easily reach avg completion latency of several hundred msecs.
A period duration which is substantially lower than avg completion
latency can lead to wildly fluctuating vrate.
Let's bump up the default latency targets to 250ms so that the period
duration is sufficiently long.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some IOs may span multiple periods. As latencies are collected on
completion, the inbetween periods won't register them and may
incorrectly decide to increase vrate. nr_lagging tracks these IOs to
avoid those situations. Currently, whenever there are IOs which are
spanning from the previous period, busy_level is reset to 0 if
negative thus suppressing vrate increase.
This has the following two problems.
* When latency target percentiles aren't set, vrate adjustment should
only be governed by queue depth depletion; however, the current code
keeps nr_lagging active which pulls in latency results and can keep
down vrate unexpectedly.
* When lagging condition is detected, it resets the entire negative
busy_level. This turned out to be way too aggressive on some
devices which sometimes experience extended latencies on a small
subset of commands. In addition, a lagging IO will be accounted as
latency target miss on completion anyway and resetting busy_level
amplifies its impact unnecessarily.
This patch fixes the above two problems by disabling nr_lagging
counting when latency target percentiles aren't set and blocking vrate
increases when there are lagging IOs while leaving busy_level as-is.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
vrate_adj tracepoint traces vrate changes; however, it does so only
when busy_level is non-zero. busy_level turning to zero can sometimes
be as interesting an event. This patch also enables vrate_adj
tracepoint on other vrate related events - busy_level changes and
non-zero nr_lagging.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cecf5d87ff ("block: split .sysfs_lock into two locks") starts to
release & acquire sysfs_lock before registering/un-registering elevator
queue during switching elevator for avoiding potential deadlock from
showing & storing 'queue/iosched' attributes and removing elevator's
kobject.
Turns out there isn't such deadlock because 'q->sysfs_lock' isn't
required in .show & .store of queue/iosched's attributes, and just
elevator's sysfs lock is acquired in elv_iosched_store() and
elv_iosched_show(). So it is safe to hold queue's sysfs lock when
registering/un-registering elevator queue.
The biggest issue is that commit cecf5d87ff assumes that concurrent
write on 'queue/scheduler' can't happen. However, this assumption isn't
true, because kernfs_fop_write() only guarantees that concurrent write
aren't called on the same open file, but the write could be from
different open on the file. So we can't release & re-acquire queue's
sysfs lock during switching elevator, otherwise use-after-free on
elevator could be triggered.
Fixes the issue by not releasing queue's sysfs lock during switching
elevator.
Fixes: cecf5d87ff ("block: split .sysfs_lock into two locks")
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit c48dac137a ("block: don't hold q->sysfs_lock in elevator_init_mq")
removes q->sysfs_lock from elevator_init_mq(), but forgot to deal with
lockdep_assert_held() called in blk_mq_sched_free_requests() which is
run in failure path of elevator_init_mq().
blk_mq_sched_free_requests() is called in the following 3 functions:
elevator_init_mq()
elevator_exit()
blk_cleanup_queue()
In blk_cleanup_queue(), blk_mq_sched_free_requests() is followed exactly
by 'mutex_lock(&q->sysfs_lock)'.
So moving the lockdep_assert_held() from blk_mq_sched_free_requests()
into elevator_exit() for fixing the report by syzbot.
Reported-by: syzbot+da3b7677bb913dc1b737@syzkaller.appspotmail.com
Fixed: c48dac137a ("block: don't hold q->sysfs_lock in elevator_init_mq")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=aAPP
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"Some later additions that weren't quite done for the first pull
request, and also a few fixes that have arrived since.
This contains:
- Kill silly pktcdvd warning on attempting to register a non-scsi
passthrough device (me)
- Use symbolic constants for the block t10 protection types, and
switch to handling it in core rather than in the drivers (Max)
- libahci platform missing node put fix (Nishka)
- Small series of fixes for BFQ (Paolo)
- Fix possible nbd crash (Xiubo)"
* tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block:
block: drop device references in bsg_queue_rq()
block: t10-pi: fix -Wswitch warning
pktcdvd: remove warning on attempting to register non-passthrough dev
ata: libahci_platform: Add of_node_put() before loop exit
nbd: fix possible page fault for nbd disk
nbd: rename the runtime flags as NBD_RT_ prefixed
block, bfq: push up injection only after setting service time
block, bfq: increase update frequency of inject limit
block, bfq: reduce upper bound for inject limit to max_rq_in_driver+1
block, bfq: update inject limit only after injection occurred
block: centralize PI remapping logic to the block layer
block: use symbolic constants for t10_pi type
Make sure that bsg_queue_rq() calls put_device() if an error is
encountered after get_device() was successful.
Fixes: cd2f076f1d ("bsg: convert to use blk-mq")
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Changing the switch() statement to symbolic constants made the compiler
(at least clang-9, did not check gcc) notice that there is one enum value
that is not handled here:
block/t10-pi.c:62:11: error: enumeration value 'T10_PI_TYPE0_PROTECTION'
not handled in switch [-Werror,-Wswitch]
Add a BUG_ON statement if we ever get to t10_pi_verify function with
TYPE0 and replace the switch() statement with if/else clause for the
valid types.
Fixes: 9b2061b1a262 ("block: use symbolic constants for t10_pi type")
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- add dma-mapping and block layer helpers to take care of IOMMU
merging for mmc plus subsequent fixups (Yoshihiro Shimoda)
- rework handling of the pgprot bits for remapping (me)
- take care of the dma direct infrastructure for swiotlb-xen (me)
- improve the dma noncoherent remapping infrastructure (me)
- better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me)
- cleanup mmaping of coherent DMA allocations (me)
- various misc cleanups (Andy Shevchenko, me)
-----BEGIN PGP SIGNATURE-----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=/wGv
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- add dma-mapping and block layer helpers to take care of IOMMU merging
for mmc plus subsequent fixups (Yoshihiro Shimoda)
- rework handling of the pgprot bits for remapping (me)
- take care of the dma direct infrastructure for swiotlb-xen (me)
- improve the dma noncoherent remapping infrastructure (me)
- better defaults for ->mmap, ->get_sgtable and ->get_required_mask
(me)
- cleanup mmaping of coherent DMA allocations (me)
- various misc cleanups (Andy Shevchenko, me)
* tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits)
mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE
mmc: queue: Fix bigger segments usage
arm64: use asm-generic/dma-mapping.h
swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page
swiotlb-xen: simplify cache maintainance
swiotlb-xen: use the same foreign page check everywhere
swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable
xen: remove the exports for xen_{create,destroy}_contiguous_region
xen/arm: remove xen_dma_ops
xen/arm: simplify dma_cache_maint
xen/arm: use dev_is_dma_coherent
xen/arm: consolidate page-coherent.h
xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance
arm: remove wrappers for the generic dma remap helpers
dma-mapping: introduce a dma_common_find_pages helper
dma-mapping: always use VM_DMA_COHERENT for generic DMA remap
vmalloc: lift the arm flag for coherent mappings to common code
dma-mapping: provide a better default ->get_required_mask
dma-mapping: remove the dma_declare_coherent_memory export
remoteproc: don't allow modular build
...
If equal to 0, the injection limit for a bfq_queue is pushed to 1
after a first sample of the total service time of the I/O requests of
the queue is computed (to allow injection to start). Yet, because of a
mistake in the branch that performs this action, the push may happen
also in some other case. This commit fixes this issue.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The update period of the injection limit has been tentatively set to
100 ms, to reduce fluctuations. This value however proved to cause,
occasionally, the limit to be decremented for some bfq_queue only
after the queue underwent excessive injection for a lot of time. This
commit reduces the period to 10 ms.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Upon an increment attempt of the injection limit, the latter is
constrained not to become higher than twice the maximum number
max_rq_in_driver of I/O requests that have happened to be in service
in the drive. This high bound allows the injection limit to grow
beyond max_rq_in_driver, which may then cause max_rq_in_driver itself
to grow.
However, since the limit is incremented by only one unit at a time,
there is no need for such a high bound, and just max_rq_in_driver+1 is
enough.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BFQ updates the injection limit of each bfq_queue as a function of how
much the limit inflates the service times experienced by the I/O
requests of the queue. So only service times affected by injection
must be taken into account. Unfortunately, in the current
implementation of this update scheme, the service time of an I/O
request rq not affected by injection may happen to be considered in
the following case: there is no I/O request in service when rq
arrives.
This commit fixes this issue by making sure that only service times
affected by injection are considered for updating the injection
limit. In particular, the service time of an I/O request rq is now
considered only if at least one of the following two conditions holds:
- the destination bfq_queue for rq underwent injection before rq
arrival, and there is still I/O in service in the drive on rq arrival
(the service of such unfinished I/O may delay the service of rq);
- injection occurs between the arrival and the completion time of rq.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently t10_pi_prepare/t10_pi_complete functions are called during the
NVMe and SCSi layers command preparetion/completion, but their actual
place should be the block layer since T10-PI is a general data integrity
feature that is used by block storage protocols. Introduce .prepare_fn
and .complete_fn callbacks within the integrity profile that each type
can implement according to its needs.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Fixed to not call queue integrity functions if BLK_DEV_INTEGRITY
isn't defined in the config.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace all hard-coded values with T10_PI_TYPES to make the code more
readable.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=Qt+h
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Two NVMe pull requests:
- ana log parse fix from Anton
- nvme quirks support for Apple devices from Ben
- fix missing bio completion tracing for multipath stack devices
from Hannes and Mikhail
- IP TOS settings for nvme rdma and tcp transports from Israel
- rq_dma_dir cleanups from Israel
- tracing for Get LBA Status command from Minwoo
- Some nvme-tcp cleanups from Minwoo, Potnuri and Myself
- Some consolidation between the fabrics transports for handling
the CAP register
- reset race with ns scanning fix for fabrics (move fabrics
commands to a dedicated request queue with a different lifetime
from the admin request queue)."
- controller reset and namespace scan races fixes
- nvme discovery log change uevent support
- naming improvements from Keith
- multiple discovery controllers reject fix from James
- some regular cleanups from various people
- Series fixing (and re-fixing) null_blk debug printing and nr_devices
checks (André)
- A few pull requests from Song, with fixes from Andy, Guoqing,
Guilherme, Neil, Nigel, and Yufen.
- REQ_OP_ZONE_RESET_ALL support (Chaitanya)
- Bio merge handling unification (Christoph)
- Pick default elevator correctly for devices with special needs
(Damien)
- Block stats fixes (Hou)
- Timeout and support devices nbd fixes (Mike)
- Series fixing races around elevator switching and device add/remove
(Ming)
- sed-opal cleanups (Revanth)
- Per device weight support for BFQ (Fam)
- Support for blk-iocost, a new model that can properly account cost of
IO workloads. (Tejun)
- blk-cgroup writeback fixes (Tejun)
- paride queue init fixes (zhengbin)
- blk_set_runtime_active() cleanup (Stanley)
- Block segment mapping optimizations (Bart)
- lightnvm fixes (Hans/Minwoo/YueHaibing)
- Various little fixes and cleanups
* tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits)
null_blk: format pr_* logs with pr_fmt
null_blk: match the type of parameter nr_devices
null_blk: do not fail the module load with zero devices
block: also check RQF_STATS in blk_mq_need_time_stamp()
block: make rq sector size accessible for block stats
bfq: Fix bfq linkage error
raid5: use bio_end_sector in r5_next_bio
raid5: remove STRIPE_OPS_REQ_PENDING
md: add feature flag MD_FEATURE_RAID0_LAYOUT
md/raid0: avoid RAID0 data corruption due to layout confusion.
raid5: don't set STRIPE_HANDLE to stripe which is in batch list
raid5: don't increment read_errors on EILSEQ return
nvmet: fix a wrong error status returned in error log page
nvme: send discovery log page change events to userspace
nvme: add uevent variables for controller devices
nvme: enable aen regardless of the presence of I/O queues
nvme-fabrics: allow discovery subsystems accept a kato
nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery()
nvme: Remove redundant assignment of cq vector
nvme: Assign subsys instance from first ctrl
...
Pull core timer updates from Thomas Gleixner:
"Timers and timekeeping updates:
- A large overhaul of the posix CPU timer code which is a preparation
for moving the CPU timer expiry out into task work so it can be
properly accounted on the task/process.
An update to the bogus permission checks will come later during the
merge window as feedback was not complete before heading of for
travel.
- Switch the timerqueue code to use cached rbtrees and get rid of the
homebrewn caching of the leftmost node.
- Consolidate hrtimer_init() + hrtimer_init_sleeper() calls into a
single function
- Implement the separation of hrtimers to be forced to expire in hard
interrupt context even when PREEMPT_RT is enabled and mark the
affected timers accordingly.
- Implement a mechanism for hrtimers and the timer wheel to protect
RT against priority inversion and live lock issues when a (hr)timer
which should be canceled is currently executing the callback.
Instead of infinitely spinning, the task which tries to cancel the
timer blocks on a per cpu base expiry lock which is held and
released by the (hr)timer expiry code.
- Enable the Hyper-V TSC page based sched_clock for Hyper-V guests
resulting in faster access to timekeeping functions.
- Updates to various clocksource/clockevent drivers and their device
tree bindings.
- The usual small improvements all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits)
posix-cpu-timers: Fix permission check regression
posix-cpu-timers: Always clear head pointer on dequeue
hrtimer: Add a missing bracket and hide `migration_base' on !SMP
posix-cpu-timers: Make expiry_active check actually work correctly
posix-timers: Unbreak CONFIG_POSIX_TIMERS=n build
tick: Mark sched_timer to expire in hard interrupt context
hrtimer: Add kernel doc annotation for HRTIMER_MODE_HARD
x86/hyperv: Hide pv_ops access for CONFIG_PARAVIRT=n
posix-cpu-timers: Utilize timerqueue for storage
posix-cpu-timers: Move state tracking to struct posix_cputimers
posix-cpu-timers: Deduplicate rlimit handling
posix-cpu-timers: Remove pointless comparisons
posix-cpu-timers: Get rid of 64bit divisions
posix-cpu-timers: Consolidate timer expiry further
posix-cpu-timers: Get rid of zero checks
rlimit: Rewrite non-sensical RLIMIT_CPU comment
posix-cpu-timers: Respect INFINITY for hard RTTIME limit
posix-cpu-timers: Switch thread group sampling to array
posix-cpu-timers: Restructure expiry array
posix-cpu-timers: Remove cputime_expires
...
In __blk_mq_end_request() if block stats needs update, we should
ensure now is valid instead of 0 even when iostat is disabled.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently rq->data_len will be decreased by partial completion or
zeroed by completion, so when blk_stat_add() is invoked, data_len
will be zero and there will never be samples in poll_cb because
blk_mq_poll_stats_bkt() will return -1 if data_len is zero.
We could move blk_stat_add() back to __blk_mq_complete_request(),
but that would make the effort of trying to call ktime_get_ns()
once in vain. Instead we can reuse throtl_size field, and use
it for both block stats and block throttle, and adjust the
logic in blk_mq_poll_stats_bkt() accordingly.
Fixes: 4bc6339a58 ("block: move blk_stat_add() to __blk_mq_end_request()")
Tested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 795fe54c2a ("bfq: Add per-device weight"), bfq uses
blkg_conf_prep() and blkg_conf_finish(), which are not exported. So, it
causes linkage error if bfq compiled as a module.
Fixes: 795fe54c2a ("bfq: Add per-device weight")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cecf5d87ff ("block: split .sysfs_lock into two locks") starts to
release & actuire sysfs_lock again during switching elevator. So it
isn't enough to prevent switching elevator from happening by simply
clearing QUEUE_FLAG_REGISTERED with holding sysfs_lock, because
in-progress switch still can move on after re-acquiring the lock,
meantime the flag of QUEUE_FLAG_REGISTERED won't get checked.
Fixes this issue by checking 'q->elevator' directly & locklessly after
q->kobj is removed in blk_unregister_queue(), this way is safe because
q->elevator can't be changed at that time.
Fixes: cecf5d87ff ("block: split .sysfs_lock into two locks")
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some devices may skip blk_pm_runtime_init() and have null pointer
in its request_queue->dev. For example, SCSI devices of UFS Well-Known
LUNs.
Currently the null pointer is checked by the user of
blk_set_runtime_active(), i.e., scsi_dev_type_resume(). It is better to
check it by blk_set_runtime_active() itself instead of by its users.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merges have the same problem that forced-bios had which is fixed by
the previous patch. The cost of a merge is calculated at the time of
issue and force-advances vtime into the future. Until global vtime
catches up, how the cgroup's hweight changes in the meantime doesn't
matter and it often leads to situations where the cost is calculated
at one hweight and paid at a very different one. See the previous
patch for more details.
Fix it by never advancing vtime into the future for merges. If budget
is available, vtime is advanced. Otherwise, the cost is charged as
debt.
This brings merge cost handling in line with issue cost handling in
ioc_rqos_throttle().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, when a bio needs to be force-charged and there isn't enough
budget, vtime is simply pushed into the future. This means that the
cost of the whole bio is scaled using the current hweight and then
charged immediately. Until the global vtime advances beyond this
future vtime, the cgroup won't be allowed to issue normal IOs.
This is incorrect and can lead to, for example, exploding vrate or
extended stalls if vrate range is constrained. Consider the following
scenario.
1. A cgroup with a very low hweight runs out of budget.
2. A storm of swap-out happens on it. All of them are scaled
according to the current low hweight and charged to vtime pushing
it to a far future.
3. All other cgroups go idle and now the above cgroup has access to
the whole device. However, because vtime is already wound using
the past low hweight, what its current hweight is doesn't matter
until global vtime catches up to the local vtime.
4. As a result, either vrate gets ramped up extremely or the IOs stall
while the underlying device is idle.
This is because the hweight the overage is calculated at is different
from the hweight that it's being paid at.
Fix it by remembering the overage in absoulte vtime and continuously
paying with the actual budget according to the current hweight at each
period.
Note that non-forced bios which wait already remembers the cost in
absolute vtime. This brings forced-bio accounting in line.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ioc_pd_free() first cancels the hrtimers and then deactivates the
iocg. However, the iocg timer can run inbetween and reschedule the
hrtimers which will end up running after the iocg is freed leading to
crashes like the following.
general protection fault: 0000 [#1] SMP
...
RIP: 0010:iocg_kick_delay+0xbe/0x1b0
RSP: 0018:ffffc90003598ea0 EFLAGS: 00010046
RAX: 1cee00fd69512b54 RBX: ffff8881bba48400 RCX: 00000000000003e8
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8881bba48400
RBP: 0000000000004e20 R08: 0000000000000002 R09: 00000000000003e8
R10: 0000000000000000 R11: 0000000000000000 R12: ffffc90003598ef0
R13: 00979f3810ad461f R14: ffff8881bba4b400 R15: 25439f950d26e1d1
FS: 0000000000000000(0000) GS:ffff88885f800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f64328c7e40 CR3: 0000000002409005 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
iocg_delay_timer_fn+0x3d/0x60
__hrtimer_run_queues+0xfe/0x270
hrtimer_interrupt+0xf4/0x210
smp_apic_timer_interrupt+0x5e/0x120
apic_timer_interrupt+0xf/0x20
</IRQ>
Fix it by canceling hrtimers after deactivating the iocg.
Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function will be useful when we update weight from the soon-coming
per-device interface.
Signed-off-by: Fam Zheng <zhengfeiran@bytedance.com>
Reviewed-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The comment of bfq_group_set_weight says the reading of prio_changed
should happen before the reading of weight, but a memory barrier is
missing here. Add it now, to match the smp_wmb() there.
Signed-off-by: Fam Zheng <zhengfeiran@bytedance.com>
Reviewed-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The lookup logic is broken - 'e' will never be NULL, even if the
list is empty. Maintain lookup hit in a separate variable instead.
Fixes: a0958ba7fc ("block: Improve default elevator selection")
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When elevator_init_mq() is called from blk_mq_init_allocated_queue(),
the only information known about the device is the number of hardware
queues as the block device scan by the device driver is not completed
yet for most drivers. The device type and elevator required features
are not set yet, preventing to correctly select the default elevator
most suitable for the device.
This currently affects all multi-queue zoned block devices which default
to the "none" elevator instead of the required "mq-deadline" elevator.
These drives currently include host-managed SMR disks connected to a
smartpqi HBA and null_blk block devices with zoned mode enabled.
Upcoming NVMe Zoned Namespace devices will also be affected.
Fix this by adding the boolean elevator_init argument to
blk_mq_init_allocated_queue() to control the execution of
elevator_init_mq(). Two cases exist:
1) elevator_init = false is used for calls to
blk_mq_init_allocated_queue() within blk_mq_init_queue(). In this
case, a call to elevator_init_mq() is added to __device_add_disk(),
resulting in the delayed initialization of the queue elevator
after the device driver finished probing the device information. This
effectively allows elevator_init_mq() access to more information
about the device.
2) elevator_init = true preserves the current behavior of initializing
the elevator directly from blk_mq_init_allocated_queue(). This case
is used for the special request based DM devices where the device
gendisk is created before the queue initialization and device
information (e.g. queue limits) is already known when the queue
initialization is executed.
Additionally, to make sure that the elevator initialization is never
done while requests are in-flight (there should be none when the device
driver calls device_add_disk()), freeze and quiesce the device request
queue before calling blk_mq_init_sched() in elevator_init_mq().
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For block devices that do not specify required features, preserve the
current default elevator selection (mq-deadline for single queue
devices, none for multi-queue devices). However, for devices specifying
required features (e.g. zoned block devices ELEVATOR_F_ZBD_SEQ_WRITE
feature), select the first available elevator providing the required
features.
In all cases, default to "none" if no elevator is available or if the
initialization of the default elevator fails.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce the definition of elevator features through the
elevator_features flags in the elevator_type structure. Each flag can
represent a feature supported by an elevator. The first feature defined
by this patch is support for zoned block device sequential write
constraint with the flag ELEVATOR_F_ZBD_SEQ_WRITE, which is implemented
by the mq-deadline elevator using zone write locking.
Other possible features are IO priorities, write hints, latency targets
or single-LUN dual-actuator disks (for which the elevator could maintain
one LBA ordered list per actuator).
The required_elevator_features field is also added to the request_queue
structure to allow a device driver to specify elevator feature flags
that an elevator must support for the correct operation of the device
(e.g. device drivers for zoned block devices can have the
ELEVATOR_F_ZBD_SEQ_WRITE flag as a required feature).
The helper function blk_queue_required_elevator_features() is
defined for setting this new field.
With these two new fields in place, the elevator functions
elevator_match() and elevator_find() are modified to allow a user to set
only an elevator with a set of features that satisfies the device
required features. Elevators not matching the device requirements are
not shown in the device sysfs queue/scheduler file to prevent their use.
The "none" elevator can always be selected as before.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the default elevator chosen is mq-deadline, elevator_init_mq() may
return an error if mq-deadline initialization fails, leading to
blk_mq_init_allocated_queue() returning an error, which in turn will
cause the block device initialization to fail and the device not being
exposed.
Instead of taking such extreme measure, handle mq-deadline
initialization failures in the same manner as when mq-deadline is not
available (no module to load), that is, default to the "none" scheduler.
With this change, elevator_init_mq() return type can be changed to void.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of checking a queue tag_set BLK_MQ_F_NO_SCHED flag before
calling elevator_init_mq() to make sure that the queue supports IO
scheduling, use the elevator.c function elv_support_iosched() in
elevator_init_mq(). This does not introduce any functional change but
ensure that elevator_init_mq() does the right thing based on the queue
settings.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the inclusion of blk-mq, elevator argument was not being
considered anymore, and it's utility died long with the legacy IO path,
now removed too.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Fold with doc removal patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 7211aef86f ("block: mq-deadline: Fix write completion
handling") added a call to blk_mq_sched_mark_restart_hctx() in
dd_dispatch_request() to make sure that write request dispatching does
not stall when all target zones are locked. This fix left a subtle race
when a write completion happens during a dispatch execution on another
CPU:
CPU 0: Dispatch CPU1: write completion
dd_dispatch_request()
lock(&dd->lock);
...
lock(&dd->zone_lock); dd_finish_request()
rq = find request lock(&dd->zone_lock);
unlock(&dd->zone_lock);
zone write unlock
unlock(&dd->zone_lock);
...
__blk_mq_free_request
check restart flag (not set)
-> queue not run
...
if (!rq && have writes)
blk_mq_sched_mark_restart_hctx()
unlock(&dd->lock)
Since the dispatch context finishes after the write request completion
handling, marking the queue as needing a restart is not seen from
__blk_mq_free_request() and blk_mq_sched_restart() not executed leading
to the dispatch stall under 100% write workloads.
Fix this by moving the call to blk_mq_sched_mark_restart_hctx() from
dd_dispatch_request() into dd_finish_request() under the zone lock to
ensure full mutual exclusion between write request dispatch selection
and zone unlock on write request completion.
Fixes: 7211aef86f ("block: mq-deadline: Fix write completion handling")
Cc: stable@vger.kernel.org
Reported-by: Hans Holmberg <Hans.Holmberg@wdc.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds a helper function whether a queue can merge
the segments by the DMA MAP layer (e.g. via IOMMU).
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au
Signed-off-by: Christoph Hellwig <hch@lst.de>
blk_iocost_init() forgot to free its percpu stat on the error path.
Fix it.
Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Reported-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a script which can be used to generate device-specific iocost
linear model coefficients.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patchset implements IO cost model based work-conserving
proportional controller.
While io.latency provides the capability to comprehensively prioritize
and protect IOs depending on the cgroups, its protection is binary -
the lowest latency target cgroup which is suffering is protected at
the cost of all others. In many use cases including stacking multiple
workload containers in a single system, it's necessary to distribute
IO capacity with better granularity.
One challenge of controlling IO resources is the lack of trivially
observable cost metric. The most common metrics - bandwidth and iops
- can be off by orders of magnitude depending on the device type and
IO pattern. However, the cost isn't a complete mystery. Given
several key attributes, we can make fairly reliable predictions on how
expensive a given stream of IOs would be, at least compared to other
IO patterns.
The function which determines the cost of a given IO is the IO cost
model for the device. This controller distributes IO capacity based
on the costs estimated by such model. The more accurate the cost
model the better but the controller adapts based on IO completion
latency and as long as the relative costs across differents IO
patterns are consistent and sensible, it'll adapt to the actual
performance of the device.
Currently, the only implemented cost model is a simple linear one with
a few sets of default parameters for different classes of device.
This covers most common devices reasonably well. All the
infrastructure to tune and add different cost models is already in
place and a later patch will also allow using bpf progs for cost
models.
Please see the top comment in blk-iocost.c and documentation for
more details.
v2: Rebased on top of RQ_ALLOC_TIME changes and folded in Rik's fix
for a divide-by-zero bug in current_hweight() triggered by zero
inuse_sum.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andy Newell <newella@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are currently two start time timestamps - start_time_ns and
io_start_time_ns. The former marks the request allocation and and the
second issue-to-device time. The planned io.weight controller needs
to measure the total time bios take to execute after it leaves rq_qos
including the time spent waiting for request to become available,
which can easily dominate on saturated devices.
This patch adds request->alloc_time_ns which records when the request
allocation attempt started. As it isn't used for the usual stats,
make it optional behind CONFIG_BLK_RQ_ALLOC_TIME and
QUEUE_FLAG_RQ_ALLOC_TIME so that it can be compiled out when there are
no users and it's active only on queues which need it even when
compiled in.
v2: s/pre_start_time/alloc_time/ and add CONFIG_BLK_RQ_ALLOC_TIME
gating as suggested by Jens.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io.weight is gonna be another rq_qos cgroup mechanism. Let's rename
RQ_QOS_CGROUP which is being used by io.latency to RQ_QOS_LATENCY in
preparation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
wbt already gets queue depth changed notification through
wbt_set_queue_depth(). Generalize it into
rq_qos_ops->queue_depth_changed() so that other rq_qos policies can
easily hook into the events too.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Separate out blkcg_conf_get_disk() so that it can be used by blkcg
policy interface file input parsers before the policy is actually
enabled. This doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For policies which can do enough initialization from ->cpd_alloc_fn(),
make ->cpd_init_fn() optional.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of @node, pass in @q and @blkcg so that the alloc function has
more context. This doesn't cause any behavior change and will be used
by io.weight implementation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The kernfs built-in lock of 'kn->count' is held in sysfs .show/.store
path. Meantime, inside block's .show/.store callback, q->sysfs_lock is
required.
However, when mq & iosched kobjects are removed via
blk_mq_unregister_dev() & elv_unregister_queue(), q->sysfs_lock is held
too. This way causes AB-BA lock because the kernfs built-in lock of
'kn-count' is required inside kobject_del() too, see the lockdep warning[1].
On the other hand, it isn't necessary to acquire q->sysfs_lock for
both blk_mq_unregister_dev() & elv_unregister_queue() because
clearing REGISTERED flag prevents storing to 'queue/scheduler'
from being happened. Also sysfs write(store) is exclusive, so no
necessary to hold the lock for elv_unregister_queue() when it is
called in switching elevator path.
So split .sysfs_lock into two: one is still named as .sysfs_lock for
covering sync .store, the other one is named as .sysfs_dir_lock
for covering kobjects and related status change.
sysfs itself can handle the race between add/remove kobjects and
showing/storing attributes under kobjects. For switching scheduler
via storing to 'queue/scheduler', we use the queue flag of
QUEUE_FLAG_REGISTERED with .sysfs_lock for avoiding the race, then
we can avoid to hold .sysfs_lock during removing/adding kobjects.
[1] lockdep warning
======================================================
WARNING: possible circular locking dependency detected
5.3.0-rc3-00044-g73277fc75ea0 #1380 Not tainted
------------------------------------------------------
rmmod/777 is trying to acquire lock:
00000000ac50e981 (kn->count#202){++++}, at: kernfs_remove_by_name_ns+0x59/0x72
but task is already holding lock:
00000000fb16ae21 (&q->sysfs_lock){+.+.}, at: blk_unregister_queue+0x78/0x10b
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&q->sysfs_lock){+.+.}:
__lock_acquire+0x95f/0xa2f
lock_acquire+0x1b4/0x1e8
__mutex_lock+0x14a/0xa9b
blk_mq_hw_sysfs_show+0x63/0xb6
sysfs_kf_seq_show+0x11f/0x196
seq_read+0x2cd/0x5f2
vfs_read+0xc7/0x18c
ksys_read+0xc4/0x13e
do_syscall_64+0xa7/0x295
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #0 (kn->count#202){++++}:
check_prev_add+0x5d2/0xc45
validate_chain+0xed3/0xf94
__lock_acquire+0x95f/0xa2f
lock_acquire+0x1b4/0x1e8
__kernfs_remove+0x237/0x40b
kernfs_remove_by_name_ns+0x59/0x72
remove_files+0x61/0x96
sysfs_remove_group+0x81/0xa4
sysfs_remove_groups+0x3b/0x44
kobject_del+0x44/0x94
blk_mq_unregister_dev+0x83/0xdd
blk_unregister_queue+0xa0/0x10b
del_gendisk+0x259/0x3fa
null_del_dev+0x8b/0x1c3 [null_blk]
null_exit+0x5c/0x95 [null_blk]
__se_sys_delete_module+0x204/0x337
do_syscall_64+0xa7/0x295
entry_SYSCALL_64_after_hwframe+0x49/0xbe
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&q->sysfs_lock);
lock(kn->count#202);
lock(&q->sysfs_lock);
lock(kn->count#202);
*** DEADLOCK ***
2 locks held by rmmod/777:
#0: 00000000e69bd9de (&lock){+.+.}, at: null_exit+0x2e/0x95 [null_blk]
#1: 00000000fb16ae21 (&q->sysfs_lock){+.+.}, at: blk_unregister_queue+0x78/0x10b
stack backtrace:
CPU: 0 PID: 777 Comm: rmmod Not tainted 5.3.0-rc3-00044-g73277fc75ea0 #1380
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS ?-20180724_192412-buildhw-07.phx4
Call Trace:
dump_stack+0x9a/0xe6
check_noncircular+0x207/0x251
? print_circular_bug+0x32a/0x32a
? find_usage_backwards+0x84/0xb0
check_prev_add+0x5d2/0xc45
validate_chain+0xed3/0xf94
? check_prev_add+0xc45/0xc45
? mark_lock+0x11b/0x804
? check_usage_forwards+0x1ca/0x1ca
__lock_acquire+0x95f/0xa2f
lock_acquire+0x1b4/0x1e8
? kernfs_remove_by_name_ns+0x59/0x72
__kernfs_remove+0x237/0x40b
? kernfs_remove_by_name_ns+0x59/0x72
? kernfs_next_descendant_post+0x7d/0x7d
? strlen+0x10/0x23
? strcmp+0x22/0x44
kernfs_remove_by_name_ns+0x59/0x72
remove_files+0x61/0x96
sysfs_remove_group+0x81/0xa4
sysfs_remove_groups+0x3b/0x44
kobject_del+0x44/0x94
blk_mq_unregister_dev+0x83/0xdd
blk_unregister_queue+0xa0/0x10b
del_gendisk+0x259/0x3fa
? disk_events_poll_msecs_store+0x12b/0x12b
? check_flags+0x1ea/0x204
? mark_held_locks+0x1f/0x7a
null_del_dev+0x8b/0x1c3 [null_blk]
null_exit+0x5c/0x95 [null_blk]
__se_sys_delete_module+0x204/0x337
? free_module+0x39f/0x39f
? blkcg_maybe_throttle_current+0x8a/0x718
? rwlock_bug+0x62/0x62
? __blkcg_punt_bio_submit+0xd0/0xd0
? trace_hardirqs_on_thunk+0x1a/0x20
? mark_held_locks+0x1f/0x7a
? do_syscall_64+0x4c/0x295
do_syscall_64+0xa7/0x295
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fb696cdbe6b
Code: 73 01 c3 48 8b 0d 1d 20 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 008
RSP: 002b:00007ffec9588788 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 0000559e589137c0 RCX: 00007fb696cdbe6b
RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559e58913828
RBP: 0000000000000000 R08: 00007ffec9587701 R09: 0000000000000000
R10: 00007fb696d4eae0 R11: 0000000000000206 R12: 00007ffec95889b0
R13: 00007ffec95896b3 R14: 0000559e58913260 R15: 0000559e589137c0
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are 4 users which check if queue is registered, so add one helper
to check it.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_map_swqueue() is called from blk_mq_init_allocated_queue()
and blk_mq_update_nr_hw_queues(). For the former caller, the kobject
isn't exposed to userspace yet. For the latter caller, hctx sysfs entries
and debugfs are un-registered before updating nr_hw_queues.
On the other hand, commit 2f8f1336a4 ("blk-mq: always free hctx after
request queue is freed") moves freeing hctx into queue's release
handler, so there won't be race with queue release path too.
So don't hold q->sysfs_lock in blk_mq_map_swqueue().
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The original comment says:
q->sysfs_lock must be held to provide mutual exclusion between
elevator_switch() and here.
Which is simply wrong. elevator_init_mq() is only called from
blk_mq_init_allocated_queue, which is always called before the request
queue is registered via blk_register_queue(), for dm-rq or normal rq
based driver. However, queue's kobject is only exposed and added to sysfs
in blk_register_queue(). So there isn't such race between elevator_switch()
and elevator_init_mq().
So avoid to hold q->sysfs_lock in elevator_init_mq().
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function has no callers. Hence remove it.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hiding page refcount manipulation inside a low-level bio helper is
somewhat awkward. Instead return the same page information to the
callers, where it fits in much better.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Passsthrough bio handling should be the same as normal bio handling,
except that we need to take hardware limitations into account. Thus
use the common try_merge implementation after checking the hardware
limits. This changes behavior in that we now also check segment
and dma boundary settings for same page merges, which is a little
more work but has no effect as those need to be larger than the
page size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we can add more data into an existing segment we do not create a gap
per definition, so move the check for a gap after the attempt to merge
into the segment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The original commit adding the sed-opal library by mistake added two
definitions of OPAL_METHOD_LENGTH, remove one of them.
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the function 'response_parse', num_entries will never be 0 as
slen is checked for 0. Hence, the condition 'if (num_entries == 0)'
can never be true.
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The dispatch list is not used any more, as the legacy block IO stack
has been removed.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We had a few issues with this code, and there's still a problem around
how we deal with error handling for chained/split bios. For now, just
revert the code and we'll try again with a thoroug solution. This
reverts commits:
e15c2ffa10 ("block: fix O_DIRECT error handling for bio fragments")
0eb6ddfb86 ("block: Fix __blkdev_direct_IO() for bio fragments")
6a43074e2f ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO")
893a1c9720 ("blk-mq: allow REQ_NOWAIT to return an error inline")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
psi tracks the time tasks wait for refaulting pages to become
uptodate, but it does not track the time spent submitting the IO. The
submission part can be significant if backing storage is contended or
when cgroup throttling (io.latency) is in effect - a lot of time is
spent in submit_bio(). In that case, we underreport memory pressure.
Annotate submit_bio() to account submission time as memory stall when
the bio is reading userspace workingset pages.
Tested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_exit_queue will free elevator_data, while blk_mq_requeue_work
will access it. Move cancel of requeue_work to the front of
blk_exit_queue to avoid use-after-free.
blk_exit_queue blk_mq_requeue_work
__elevator_exit blk_mq_run_hw_queues
blk_mq_exit_sched blk_mq_run_hw_queue
dd_exit_queue blk_mq_hctx_has_pending
kfree(elevator_data) blk_mq_sched_has_work
dd_has_work
Fixes: fbc2a15e34 ("blk-mq: move cancel of requeue_work into blk_mq_release")
Cc: stable@vger.kernel.org
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As reported in [1], the call bfq_init_rq(rq) may return NULL in case
of OOM (in particular, if rq->elv.icq is NULL because memory
allocation failed in failed in ioc_create_icq()).
This commit handles this circumstance.
[1] https://lkml.org/lkml/2019/7/22/824
Cc: Hsin-Yi Wang <hsinyi@google.com>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Doug Anderson <dianders@chromium.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Hsin-Yi Wang <hsinyi@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 13a857a4c4 ("block, bfq: detect wakers and
unconditionally inject their I/O"), every bfq_queue has a pointer to a
waker bfq_queue and a list of the bfq_queues it may wake. In this
respect, when a bfq_queue, say Q, remains with no I/O source attached
to it, Q cannot be woken by any other bfq_queue, and cannot wake any
other bfq_queue. Then Q must be removed from the woken list of its
possible waker bfq_queue, and all bfq_queues in the woken list of Q
must stop having a waker bfq_queue.
Q remains with no I/O source in two cases: when the last process
associated with Q exits or when such a process gets associated with a
different bfq_queue. Unfortunately, commit 13a857a4c4 ("block, bfq:
detect wakers and unconditionally inject their I/O") performed the
above updates only in the first case.
This commit fixes this bug by moving these updates to when Q gets
freed. This is a simple and safe way to handle all cases, as both the
above events, process exit and re-association, lead to Q being freed
soon, and because dangling references would come out only after Q gets
freed (if no update were performed).
Fixes: 13a857a4c4 ("block, bfq: detect wakers and unconditionally inject their I/O")
Reported-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 13a857a4c4 ("block, bfq: detect wakers and
unconditionally inject their I/O"), BFQ stores, in a per-device
pointer last_completed_rq_bfqq, the last bfq_queue that had an I/O
request completed. If some bfq_queue receives new I/O right after the
last request of last_completed_rq_bfqq has been completed, then
last_completed_rq_bfqq may be a waker bfq_queue.
But if the bfq_queue last_completed_rq_bfqq points to is freed, then
last_completed_rq_bfqq becomes a dangling reference. This commit
resets last_completed_rq_bfqq if the pointed bfq_queue is freed.
Fixes: 13a857a4c4 ("block, bfq: detect wakers and unconditionally inject their I/O")
Reported-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that there no module users left of bio_map_kern, stop exporting the
symbol.
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hans Holmberg <hans@owltronix.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Spread queues among present CPUs first, then building mapping on other
non-present CPUs.
So we can minimize count of dead queues which are mapped by un-present
CPUs only. Then bad IO performance can be avoided by unbalanced mapping
between present CPUs and queues.
The similar policy has been applied on Managed IRQ affinity.
Cc: Yi Zhang <yi.zhang@redhat.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This implements REQ_OP_ZONE_RESET_ALL as a special case of the block
device zone reset operations where we just simply issue bio with the
newly introduced req op.
We issue this req op when the number of sectors is equal to the device's
partition's number of sectors and device has no partitions.
We also add support so that blk_op_str() can print the new reset-all
zone operation.
This patch also adds a generic make request check for newly
introduced REQ_OP_ZONE_RESET_ALL req_opf. We simply return error
when queue is zoned and reset-all flag is not set for
REQ_OP_ZONE_RESET_ALL.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change a reference to the legacy block layer into a reference to blk-mq.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Consider the following example:
* The logical block size is 4 KB.
* The physical block size is 8 KB.
* max_sectors equals (16 KB >> 9) sectors.
* A non-aligned 4 KB and an aligned 64 KB bio are merged into a single
non-aligned 68 KB bio.
The current behavior is to split such a bio into (16 KB + 16 KB + 16 KB
+ 16 KB + 4 KB). The start of none of these five bio's is aligned to a
physical block boundary.
This patch ensures that such a bio is split into four aligned and
one non-aligned bio instead of being split into five non-aligned bios.
This improves performance because most block devices can handle aligned
requests faster than non-aligned requests.
Since the physical block size is larger than or equal to the logical
block size, this patch preserves the guarantee that the returned
value is a multiple of the logical block size.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the max_sectors check into bvec_split_segs() such that a single
call to that function can do all the necessary checks. This patch
optimizes the fast path further, namely if a bvec fits in a page.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Simplify this function by by removing two if-tests. Other than requiring
that the @sectors pointer is not NULL, this patch does not change the
behavior of bvec_split_segs().
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since what the bio splitting functions do is nontrivial, document these
functions.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make it clear to the compiler and also to humans that the functions
that query request queue properties do not modify any member of the
request_queue data structure.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_tagset_wait_completed_request() has been applied for waiting
for completed request's fn, so not necessary to use
blk_mq_complete_request_sync() any more.
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk-mq may schedule to call queue's complete function on remote CPU via
IPI, but doesn't provide any way to synchronize the request's complete
fn. The current queue freeze interface can't provide the synchonization
because aborted requests stay at blk-mq queues during EH.
In some driver's EH(such as NVMe), hardware queue's resource may be freed &
re-allocated. If the completed request's complete fn is run finally after the
hardware queue's resource is released, kernel crash will be triggered.
Prepare for fixing this kind of issue by introducing
blk_mq_tagset_wait_completed_request().
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
NVMe needs this function to decide if one request to be aborted has
been completed in normal IO path already.
So introduce it.
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
hrtimer_sleepers will gain a scheduling class dependent treatment on
PREEMPT_RT. Use the new hrtimer_sleeper_start_expires() function to make
that possible.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
hrtimer_init_sleeper() calls require prior initialisation of the hrtimer
object which is embedded into the hrtimer_sleeper.
Combine the initialization and spare a function call. Fixup all call sites.
This is also a preparatory change for PREEMPT_RT to do hrtimer sleeper
specific initializations of the embedded hrtimer without modifying any of
the call sites.
No functional change.
[ anna-maria: Minor cleanups ]
[ tglx: Adopted to the removal of the task argument of
hrtimer_init_sleeper() and trivial polishing.
Folded a fix from Stephen Rothwell for the vsoc code ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726185752.887468908@linutronix.de
All callers hand in 'current' and that's the only task pointer which
actually makes sense. Remove the task argument and set current in the
function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726185752.791885290@linutronix.de
We should only set the max segment size to unlimited if we actually
have a virt boundary. Otherwise we accidentally clear that limit
when called from the SCSI midlayer, which always calls
blk_queue_virt_boundary, even if that mask is 0.
Fixes: 7ad388d8e4 ("scsi: core: add a host / host template field for the virt boundary")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=HIzH
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190726' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Several io_uring fixes/improvements:
- Blocking fix for O_DIRECT (me)
- Latter page slowness for registered buffers (me)
- Fix poll hang under certain conditions (me)
- Defer sequence check fix for wrapped rings (Zhengyuan)
- Mismatch in async inc/dec accounting (Zhengyuan)
- Memory ordering issue that could cause stall (Zhengyuan)
- Track sequential defer in bytes, not pages (Zhengyuan)
- NVMe pull request from Christoph
- Set of hang fixes for wbt (Josef)
- Redundant error message kill for libahci (Ding)
- Remove unused blk_mq_sched_started_request() and related ops (Marcos)
- drbd dynamic alloc shash descriptor to reduce stack use (Arnd)
- blkcg ->pd_stat() non-debug print (Tejun)
- bcache memory leak fix (Wei)
- Comment fix (Akinobu)
- BFQ perf regression fix (Paolo)
* tag 'for-linus-20190726' of git://git.kernel.dk/linux-block: (24 commits)
io_uring: ensure ->list is initialized for poll commands
Revert "nvme-pci: don't create a read hctx mapping without read queues"
nvme: fix multipath crash when ANA is deactivated
nvme: fix memory leak caused by incorrect subsystem free
nvme: ignore subnqn for ADATA SX6000LNP
drbd: dynamically allocate shash descriptor
block: blk-mq: Remove blk_mq_sched_started_request and started_request
bcache: fix possible memory leak in bch_cached_dev_run()
io_uring: track io length in async_list based on bytes
io_uring: don't use iov_iter_advance() for fixed buffers
block: properly handle IOCB_NOWAIT for async O_DIRECT IO
blk-mq: allow REQ_NOWAIT to return an error inline
io_uring: add a memory barrier before atomic_read
rq-qos: use a mb for got_token
rq-qos: set ourself TASK_UNINTERRUPTIBLE after we schedule
rq-qos: don't reset has_sleepers on spurious wakeups
rq-qos: fix missed wake-ups in rq_qos_throttle
wait: add wq_has_single_sleeper helper
block, bfq: check also in-flight I/O in dispatch plugging
block: fix sysfs module parameters directory path in comment
...
blk_mq_sched_completed_request is a function that checks if the elevator
related to the request has started_request implemented, but currently, none of
the available IO schedulers implement started_request, so remove both.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By default, if a caller sets REQ_NOWAIT and we need to block, we'll
return -EAGAIN through the bio->bi_end_io() callback. For some use
cases, this makes it hard to use.
Allow a caller to ask for inline return of errors related to
blocking by also setting REQ_NOWAIT_INLINE.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Oleg noticed that our checking of data.got_token is unsafe in the
cleanup case, and should really use a memory barrier. Use a wmb on the
write side, and a rmb() on the read side. We don't need one in the main
loop since we're saved by set_current_state().
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In case we get a spurious wakeup we need to make sure to re-set
ourselves to TASK_UNINTERRUPTIBLE so we don't busy wait.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we raced with somebody else getting an inflight counter we could fail
to get an inflight counter with no sleepers on the list, and thus need
to go to sleep. In this case has_sleepers should be true because we are
now relying on the waker to get our inflight counter for us. And in the
case of spurious wakeups we'd still want this to be the case. So set
has_sleepers to true if we went to sleep to make sure we're woken up the
proper way.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We saw a hang in production with WBT where there was only one waiter in
the throttle path and no outstanding IO. This is because of the
has_sleepers optimization that is used to make sure we don't steal an
inflight counter for new submitters when there are people already on the
list.
We can race with our check to see if the waitqueue has any waiters (this
is done locklessly) and the time we actually add ourselves to the
waitqueue. If this happens we'll go to sleep and never be woken up
because nobody is doing IO to wake us up.
Fix this by checking if the waitqueue has a single sleeper on the list
after we add ourselves, that way we have an uptodate view of the list.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Consider a sync bfq_queue Q that remains empty while in service, and
suppose that, when this happens, there is a fair amount of already
in-flight I/O not belonging to Q. In such a situation, I/O dispatching
may need to be plugged (until new I/O arrives for Q), for the
following reason.
The drive may decide to serve in-flight non-Q's I/O requests before
Q's ones, thereby delaying the arrival of new I/O requests for Q
(recall that Q is sync). If I/O-dispatching is not plugged, then,
while Q remains empty, a basically uncontrolled amount of I/O from
other queues may be dispatched too, possibly causing the service of
Q's I/O to be delayed even longer in the drive. This problem gets more
and more serious as the speed and the queue depth of the drive grow,
because, as these two quantities grow, the probability to find no
queue busy but many requests in flight grows too.
If Q has the same weight and priority as the other queues, then the
above delay is unlikely to cause any issue, because all queues tend to
undergo the same treatment. So, since not plugging I/O dispatching is
convenient for throughput, it is better not to plug. Things change in
case Q has a higher weight or priority than some other queue, because
Q's service guarantees may simply be violated. For this reason,
commit 1de0c4cd9e ("block, bfq: reduce idling only in symmetric
scenarios") does plug I/O in such an asymmetric scenario. Plugging
minimizes the delay induced by already in-flight I/O, and enables Q to
recover the bandwidth it may lose because of this delay.
Yet the above commit does not cover the case of weight-raised queues,
for efficiency concerns. For weight-raised queues, I/O-dispatch
plugging is activated simply if not all bfq_queues are
weight-raised. But this check does not handle the case of in-flight
requests, because a bfq_queue may become non busy *before* all its
in-flight requests are completed.
This commit performs I/O-dispatch plugging for weight-raised queues if
there are some in-flight requests.
As a practical example of the resulting recover of control, under
write load on a Samsung SSD 970 PRO, gnome-terminal starts in 1.5
seconds after this fix, against 15 seconds before the fix (as a
reference, gnome-terminal takes about 35 seconds to start with any of
the other I/O schedulers).
Fixes: 1de0c4cd9e ("block, bfq: reduce idling only in symmetric scenarios")
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=smxY
-----END PGP SIGNATURE-----
Merge tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull rst conversion of docs from Mauro Carvalho Chehab:
"As agreed with Jon, I'm sending this big series directly to you, c/c
him, as this series required a special care, in order to avoid
conflicts with other trees"
* tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (77 commits)
docs: kbuild: fix build with pdf and fix some minor issues
docs: block: fix pdf output
docs: arm: fix a breakage with pdf output
docs: don't use nested tables
docs: gpio: add sysfs interface to the admin-guide
docs: locking: add it to the main index
docs: add some directories to the main documentation index
docs: add SPDX tags to new index files
docs: add a memory-devices subdir to driver-api
docs: phy: place documentation under driver-api
docs: serial: move it to the driver-api
docs: driver-api: add remaining converted dirs to it
docs: driver-api: add xilinx driver API documentation
docs: driver-api: add a series of orphaned documents
docs: admin-guide: add a series of orphaned documents
docs: cgroup-v1: add it to the admin-guide book
docs: aoe: add it to the driver-api book
docs: add some documentation dirs to the driver-api book
docs: driver-model: move it to the driver-api book
docs: lp855x-driver.rst: add it to the driver-api book
...
The runtime configurable module parameter files are located under
/sys/module/MODULENAME/parameters, not /sys/module/MODULENAME.
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, ->pd_stat() is called only when moduleparam
blkcg_debug_stats is set which prevents it from printing non-debug
policy-specific statistics. Let's move debug testing down so that
->pd_stat() can print non-debug stat too. This patch doesn't cause
any visible behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are lots of documents that belong to the admin-guide but
are on random places (most under Documentation root dir).
Move them to the admin guide.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Rename the block documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Limit the size of the struct blk_zone array used in
blk_revalidate_disk_zones() to avoid memory allocation failures leading
to disk revalidation failure. Also further reduce the likelyhood of
such failures by using kvcalloc() (that is vmalloc()) instead of
allocating contiguous pages with alloc_pages().
Fixes: 515ce60613 ("scsi: sd_zbc: Fix sd_zbc_report_zones() buffer allocation")
Fixes: e76239a374 ("block: add a report_zones method")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only GFP_KERNEL and GFP_NOIO are used with blkdev_report_zones(). In
preparation of using vmalloc() for large report buffer and zone array
allocations used by this function, remove its "gfp_t gfp_mask" argument
and rely on the caller context to use memalloc_noio_save/restore() where
necessary (block layer zone revalidation and dm-zoned I/O error path).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To allow the SCSI subsystem scsi_execute_req() function to issue
requests using large buffers that are better allocated with vmalloc()
rather than kmalloc(), modify bio_map_kern() to allow passing a buffer
allocated with vmalloc().
To do so, detect vmalloc-ed buffers using is_vmalloc_addr(). For
vmalloc-ed buffers, flush the buffer using flush_kernel_vmap_range(),
use vmalloc_to_page() instead of virt_to_page() to obtain the pages of
the buffer, and invalidate the buffer addresses with
invalidate_kernel_vmap_range() on completion of read BIOs. This last
point is executed using the function bio_invalidate_vmalloc_pages()
which is defined only if the architecture defines
ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE, that is, if the architecture
actually needs the invalidation done.
Fixes: 515ce60613 ("scsi: sd_zbc: Fix sd_zbc_report_zones() buffer allocation")
Fixes: e76239a374 ("block: add a report_zones method")
Cc: stable@vger.kernel.org
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In bio_integrity_prep(), a kernel buffer is allocated through kmalloc() to
hold integrity metadata. Later on, the buffer will be attached to the bio
structure through bio_integrity_add_page(), which returns the number of
bytes of integrity metadata attached. Due to unexpected situations,
bio_integrity_add_page() may return 0. As a result, bio_integrity_prep()
needs to be terminated with 'false' returned to indicate this error.
However, the allocated kernel buffer is not freed on this execution path,
leading to a memory leak.
To fix this issue, free the allocated buffer before returning from
bio_integrity_prep().
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Simultaneously writing to a sequential zone of a zoned block device
from multiple contexts requires mutual exclusion for BIO issuing to
ensure that writes happen sequentially. However, even for a well
behaved user correctly implementing such synchronization, BIO plugging
may interfere and result in BIOs from the different contextx to be
reordered if plugging is done outside of the mutual exclusion section,
e.g. the plug was started by a function higher in the call chain than
the function issuing BIOs.
Context A Context B
| blk_start_plug()
| ...
| seq_write_zone()
| mutex_lock(zone)
| bio-0->bi_iter.bi_sector = zone->wp
| zone->wp += bio_sectors(bio-0)
| submit_bio(bio-0)
| bio-1->bi_iter.bi_sector = zone->wp
| zone->wp += bio_sectors(bio-1)
| submit_bio(bio-1)
| mutex_unlock(zone)
| return
| -----------------------> | seq_write_zone()
| mutex_lock(zone)
| bio-2->bi_iter.bi_sector = zone->wp
| zone->wp += bio_sectors(bio-2)
| submit_bio(bio-2)
| mutex_unlock(zone)
| <------------------------- |
| blk_finish_plug()
In the above example, despite the mutex synchronization ensuring the
correct BIO issuing order 0, 1, 2, context A BIOs 0 and 1 end up being
issued after BIO 2 of context B, when the plug is released with
blk_finish_plug().
While this problem can be addressed using the blk_flush_plug_list()
function (in the above example, the call must be inserted before the
zone mutex lock is released), a simple generic solution in the block
layer avoid this additional code in all zoned block device user code.
The simple generic solution implemented with this patch is to introduce
the internal helper function blk_mq_plug() to access the current
context plug on BIO submission. This helper returns the current plug
only if the target device is not a zoned block device or if the BIO to
be plugged is not a write operation. Otherwise, the caller context plug
is ignored and NULL returned, resulting is all writes to zoned block
device to never be plugged.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After commit 991f61fe7e ("Blk-throttle: reduce tail io latency when
iops limit is enforced") wait time could be zero even if group is
throttled and cannot issue requests right now. As a result
throtl_select_dispatch() turns into busy-loop under irq-safe queue
spinlock.
Fix is simple: always round up target time to the next throttle slice.
Fixes: 991f61fe7e ("Blk-throttle: reduce tail io latency when iops limit is enforced")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For large values of the number of zones reported and/or large zone
sizes, the sector increment calculated with
blk_queue_zone_sectors(q) * n
in blk_report_zones() loop can overflow the unsigned int type used for
the calculation as both "n" and blk_queue_zone_sectors() value are
unsigned int. E.g. for a device with 256 MB zones (524288 sectors),
overflow happens with 8192 or more zones reported.
Changing the return type of blk_queue_zone_sectors() to sector_t, fixes
this problem and avoids overflow problem for all other callers of this
helper too. The same change is also applied to the bdev_zone_sectors()
helper.
Fixes: e76239a374 ("block: add a report_zones method")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a shared kthread needs to issue a bio for a cgroup, doing so
synchronously can lead to priority inversions as the kthread can be
trapped waiting for that cgroup. This patch implements
REQ_CGROUP_PUNT flag which makes submit_bio() punt the actual issuing
to a dedicated per-blkcg work item to avoid such priority inversions.
This will be used to fix priority inversions in btrfs compression and
should be generally useful as we grow filesystem support for
comprehensive IO control.
Cc: Chris Mason <clm@fb.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
btrfs is going to use css_put() and wbc helpers to improve cgroup
writeback support. Add dummy css_get() definition and export wbc
helpers to prepare for module and !CONFIG_CGROUP builds.
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the psi stuff in place we can use the memstall flag to indicate
pressure that happens from throttling.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We discovered a problem in newer kernels where a disconnect of a NBD
device while the flush request was pending would result in a hang. This
is because the blk mq timeout handler does
if (!refcount_inc_not_zero(&rq->ref))
return true;
to determine if it's ok to run the timeout handler for the request.
Flush_rq's don't have a ref count set, so we'd skip running the timeout
handler for this request and it would just sit there in limbo forever.
Fix this by always setting the refcount of any request going through
blk_init_rq() to 1. I tested this with a nbd-server that dropped flush
requests to verify that it hung, and then tested with this patch to
verify I got the timeout as expected and the error handling kicked in.
Thanks,
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=VSYT
-----END PGP SIGNATURE-----
Merge tag 'for-5.3/block-20190708' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"This is the main block updates for 5.3. Nothing earth shattering or
major in here, just fixes, additions, and improvements all over the
map. This contains:
- Series of documentation fixes (Bart)
- Optimization of the blk-mq ctx get/put (Bart)
- null_blk removal race condition fix (Bob)
- req/bio_op() cleanups (Chaitanya)
- Series cleaning up the segment accounting, and request/bio mapping
(Christoph)
- Series cleaning up the page getting/putting for bios (Christoph)
- block cgroup cleanups and moving it to where it is used (Christoph)
- block cgroup fixes (Tejun)
- Series of fixes and improvements to bcache, most notably a write
deadlock fix (Coly)
- blk-iolatency STS_AGAIN and accounting fixes (Dennis)
- Series of improvements and fixes to BFQ (Douglas, Paolo)
- debugfs_create() return value check removal for drbd (Greg)
- Use struct_size(), where appropriate (Gustavo)
- Two lighnvm fixes (Heiner, Geert)
- MD fixes, including a read balance and corruption fix (Guoqing,
Marcos, Xiao, Yufen)
- block opal shadow mbr additions (Jonas, Revanth)
- sbitmap compare-and-exhange improvemnts (Pavel)
- Fix for potential bio->bi_size overflow (Ming)
- NVMe pull requests:
- improved PCIe suspent support (Keith Busch)
- error injection support for the admin queue (Akinobu Mita)
- Fibre Channel discovery improvements (James Smart)
- tracing improvements including nvmetc tracing support (Minwoo Im)
- misc fixes and cleanups (Anton Eidelman, Minwoo Im, Chaitanya
Kulkarni)"
- Various little fixes and improvements to drivers and core"
* tag 'for-5.3/block-20190708' of git://git.kernel.dk/linux-block: (153 commits)
blk-iolatency: fix STS_AGAIN handling
block: nr_phys_segments needs to be zero for REQ_OP_WRITE_ZEROES
blk-mq: simplify blk_mq_make_request()
blk-mq: remove blk_mq_put_ctx()
sbitmap: Replace cmpxchg with xchg
block: fix .bi_size overflow
block: sed-opal: check size of shadow mbr
block: sed-opal: ioctl for writing to shadow mbr
block: sed-opal: add ioctl for done-mark of shadow mbr
block: never take page references for ITER_BVEC
direct-io: use bio_release_pages in dio_bio_complete
block_dev: use bio_release_pages in bio_unmap_user
block_dev: use bio_release_pages in blkdev_bio_end_io
iomap: use bio_release_pages in iomap_dio_bio_end_io
block: use bio_release_pages in bio_map_user_iov
block: use bio_release_pages in bio_unmap_user
block: optionally mark pages dirty in bio_release_pages
block: move the BIO_NO_PAGE_REF check into bio_release_pages
block: skd_main.c: Remove call to memset after dma_alloc_coherent
block: mtip32xx: Remove call to memset after dma_alloc_coherent
...
Pull cgroup updates from Tejun Heo:
"Documentation updates and the addition of cgroup_parse_float() which
will be used by new controllers including blk-iocost"
* 'for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs: cgroup-v1: convert docs to ReST and rename to *.rst
cgroup: Move cgroup_parse_float() implementation out of CONFIG_SYSFS
cgroup: add cgroup_parse_float()
When the blk-mq debugfs file creation logic was "cleaned up" it was
cleaned up too much, causing the queue file to not be created in the
correct location. Turns out the check for the directory being present
is needed as if that has not happened yet, the files should not be
created, and the function will be called later on in the initialization
code so that the files can be created in the correct location.
Fixes: 6cfc0081b0 ("blk-mq: no need to check return value of debugfs_create functions")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: linux-block@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The iolatency controller is based on rq_qos. It increments on
rq_qos_throttle() and decrements on either rq_qos_cleanup() or
rq_qos_done_bio(). a3fb01ba5a fixes the double accounting issue where
blk_mq_make_request() may call both rq_qos_cleanup() and
rq_qos_done_bio() on REQ_NO_WAIT. So checking STS_AGAIN prevents the
double decrement.
The above works upstream as the only way we can get STS_AGAIN is from
blk_mq_get_request() failing. The STS_AGAIN handling isn't a real
problem as bio_endio() skipping only happens on reserved tag allocation
failures which can only be caused by driver bugs and already triggers
WARN.
However, the fix creates a not so great dependency on how STS_AGAIN can
be propagated. Internally, we (Facebook) carry a patch that kills read
ahead if a cgroup is io congested or a fatal signal is pending. This
combined with chained bios progagate their bi_status to the parent is
not already set can can cause the parent bio to not clean up properly
even though it was successful. This consequently leaks the inflight
counter and can hang all IOs under that blkg.
To nip the adverse interaction early, this removes the rq_qos_cleanup()
callback in iolatency in favor of cleaning up always on the
rq_qos_done_bio() path.
Fixes: a3fb01ba5a ("blk-iolatency: only account submitted bios")
Debugged-by: Tejun Heo <tj@kernel.org>
Debugged-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix a regression introduced when removing bi_phys_segments for Write Zeroes
requests, which need to have a segment count of zero, as they don't have a
payload.
Fixes: 14ccb66b3f ("block: remove the bi_phys_segments field in struct bio")
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the blk_mq_bio_to_request() call in front of the if-statement.
Cc: Hannes Reinecke <hare@suse.com>
Cc: Omar Sandoval <osandov@fb.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No code that occurs between blk_mq_get_ctx() and blk_mq_put_ctx() depends
on preemption being disabled for its correctness. Since removing the CPU
preemption calls does not measurably affect performance, simplify the
blk-mq code by removing the blk_mq_put_ctx() function and also by not
disabling preemption in blk_mq_get_ctx().
Cc: Hannes Reinecke <hare@suse.com>
Cc: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
'bio->bi_iter.bi_size' is 'unsigned int', which at most hold 4G - 1
bytes.
Before 07173c3ec2 ("block: enable multipage bvecs"), one bio can
include very limited pages, and usually at most 256, so the fs bio
size won't be bigger than 1M bytes most of times.
Since we support multi-page bvec, in theory one fs bio really can
be added > 1M pages, especially in case of hugepage, or big writeback
with too many dirty pages. Then there is chance in which .bi_size
is overflowed.
Fixes this issue by using bio_full() to check if the added segment may
overflow .bi_size.
Cc: Liu Yiding <liuyd.fnst@cn.fujitsu.com>
Cc: kernel test robot <rong.a.chen@intel.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: linux-xfs@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 07173c3ec2 ("block: enable multipage bvecs")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Os1seHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGtx4H/j6i482XzcGFKTBm
A7mBoQpy+kLtoUov4EtBAR62OuwI8rsahW9di37QKndPoQrczWaKBmr3De6LCdPe
v3pl3O6wBbvH5ru+qBPFX9PdNbDvimEChh7LHxmMxNQq3M+AjZAZVJyfpoiFnx35
Fbge+LZaH/k8HMwZmkMr5t9Mpkip715qKg2o9Bua6dkH0AqlcpLlC8d9a+HIVw/z
aAsyGSU8jRwhoAOJsE9bJf0acQ/pZSqmFp0rDKqeFTSDMsbDRKLGq/dgv4nW0RiW
s7xqsjb/rdcvirRj3rv9+lcTVkOtEqwk0PVdL9WOf7g4iYrb3SOIZh8ZyViaDSeH
VTS5zps=
=huBY
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rc6' into for-5.3/block
Merge 5.2-rc6 into for-5.3/block, so we get the same page merge leak
fix. Otherwise we end up having conflicts with future patches between
for-5.3/block and master that touch this area. In particular, it makes
the bio_full() fix hard to backport to stable.
* tag 'v5.2-rc6': (482 commits)
Linux 5.2-rc6
Revert "iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock"
Bluetooth: Fix regression with minimum encryption key size alignment
tcp: refine memory limit test in tcp_fragment()
x86/vdso: Prevent segfaults due to hoisted vclock reads
SUNRPC: Fix a credential refcount leak
Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"
net :sunrpc :clnt :Fix xps refcount imbalance on the error path
NFS4: Only set creation opendata if O_CREAT
ARM: 8867/1: vdso: pass --be8 to linker if necessary
KVM: nVMX: reorganize initial steps of vmx_set_nested_state
KVM: PPC: Book3S HV: Invalidate ERAT when flushing guest TLB entries
habanalabs: use u64_to_user_ptr() for reading user pointers
nfsd: replace Jeff by Chuck as nfsd co-maintainer
inet: clear num_timeout reqsk_alloc()
PCI/P2PDMA: Ignore root complex whitelist when an IOMMU is present
net: mvpp2: debugfs: Add pmap to fs dump
ipv6: Default fib6_type to RTN_UNICAST when not set
net: hns3: Fix inconsistent indenting
net/af_iucv: always register net_device notifier
...
Check whether the shadow mbr does fit in the provided space on the
target. Also a proper firmware should handle this case and return an
error we may prevent problems or even damage with crappy firmwares.
Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz>
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allow modification of the shadow mbr. If the shadow mbr is not marked as
done, this data will be presented read only as the device content. Only
after marking the shadow mbr as done and unlocking a locking range the
actual content is accessible.
Co-authored-by: David Kozub <zub@linux.fjfi.cvut.cz>
Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz>
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Enable users to mark the shadow mbr as done without completely
deactivating the shadow mbr feature. This may be useful on reboots,
when the power to the disk is not disconnected in between and the shadow
mbr stores the required boot files. Of course, this saves also the
(few) commands required to enable the feature if it is already enabled
and one only wants to mark the shadow mbr as done.
Co-authored-by: David Kozub <zub@linux.fjfi.cvut.cz>
Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed by: Scott Bauer <sbauer@plzdonthack.me>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we pass pages through an iov_iter we always already have a reference
in the caller. Thus remove the ITER_BVEC_FLAG_NO_REF and don't take
reference to pages by default for bvec backed iov_iters.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use bio_release_pages instead of open coding it.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use bio_release_pages instead of open coding it.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A lot of callers of bio_release_pages also want to mark the released
pages as dirty. Add a mark_dirty parameter to avoid a second
relatively expensive bio_for_each_segment_all loop.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the BIO_NO_PAGE_REF check into bio_release_pages instead of
duplicating it in both callers.
Also make the function available outside of bio.c so that we can
reuse it in other direct I/O implementations.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
'who' an unsigned variable in stucture opal_session_info
can never be lesser than zero. Hence, the condition
"who < OPAL_ADMIN1" can never be true.
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
PSID is a 32 character password printed on the drive label,
to prove its physical access. This PSID reverttper function
is very useful to regain the control over the drive when it
is locked and the user can no longer access it because of some
failures. However, *all the data on the drive is completely
erased*. This method is advisable only when the user is exhausted
of all other recovery methods.
PSID capabilities are described in:
https://trustedcomputinggroup.org/wp-content/uploads/TCG_Storage-Opal_Feature_Set_PSID_v1.00_r1.00.pdf
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In reboot tests on several devices we were seeing a "use after free"
when slub_debug or KASAN was enabled. The kernel complained about:
Unable to handle kernel paging request at virtual address 6b6b6c2b
...which is a classic sign of use after free under slub_debug. The
stack crawl in kgdb looked like:
0 test_bit (addr=<optimized out>, nr=<optimized out>)
1 bfq_bfqq_busy (bfqq=<optimized out>)
2 bfq_select_queue (bfqd=<optimized out>)
3 __bfq_dispatch_request (hctx=<optimized out>)
4 bfq_dispatch_request (hctx=<optimized out>)
5 0xc056ef00 in blk_mq_do_dispatch_sched (hctx=0xed249440)
6 0xc056f728 in blk_mq_sched_dispatch_requests (hctx=0xed249440)
7 0xc0568d24 in __blk_mq_run_hw_queue (hctx=0xed249440)
8 0xc0568d94 in blk_mq_run_work_fn (work=<optimized out>)
9 0xc024c5c4 in process_one_work (worker=0xec6d4640, work=0xed249480)
10 0xc024cff4 in worker_thread (__worker=0xec6d4640)
Digging in kgdb, it could be found that, though bfqq looked fine,
bfqq->bic had been freed.
Through further digging, I postulated that perhaps it is illegal to
access a "bic" (AKA an "icq") after bfq_exit_icq() had been called
because the "bic" can be freed at some point in time after this call
is made. I confirmed that there certainly were cases where the exact
crashing code path would access the "bic" after bfq_exit_icq() had
been called. Sspecifically I set the "bfqq->bic" to (void *)0x7 and
saw that the bic was 0x7 at the time of the crash.
To understand a bit more about why this crash was fairly uncommon (I
saw it only once in a few hundred reboots), you can see that much of
the time bfq_exit_icq_fbqq() fully frees the bfqq and thus it can't
access the ->bic anymore. The only case it doesn't is if
bfq_put_queue() sees a reference still held.
However, even in the case when bfqq isn't freed, the crash is still
rare. Why? I tracked what happened to the "bic" after the exit
routine. It doesn't get freed right away. Rather,
put_io_context_active() eventually called put_io_context() which
queued up freeing on a workqueue. The freeing then actually happened
later than that through call_rcu(). Despite all these delays, some
extra debugging showed that all the hoops could be jumped through in
time and the memory could be freed causing the original crash. Phew!
To make a long story short, assuming it truly is illegal to access an
icq after the "exit_icq" callback is finished, this patch is needed.
Cc: stable@vger.kernel.org
Reviewed-by: Paolo Valente <paolo.valente@unimore.it>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_flush_dcache_pages() is unused. Remove it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some debug code suggested by Paolo was tripping when I did reboot
stress tests. Specifically in bfq_bfqq_resume_state()
"bic->saved_wr_start_at_switch_to_srt" was later than the current
value of "jiffies". A bit of debugging showed that
"bic->saved_wr_start_at_switch_to_srt" was actually 0 and a bit more
debugging showed that was because we had run through the "unlikely"
case in the bfq_bfqq_save_state() function.
Let's init "saved_wr_start_at_switch_to_srt" in the unlikely case to
something sane.
NOTE: this fixes no known real-world errors.
Reviewed-by: Paolo Valente <paolo.valente@linaro.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By mistake, there is a '&' instead of a '==' in the definition of the
macro BFQQ_TOTALLY_SEEKY. This commit replaces the wrong operator with
the correct one.
Fixes: 7074f076ff ("block, bfq: do not tag totally seeky queues as soft rt")
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Consider, on one side, a bfq_queue Q that remains empty while in
service, and, on the other side, the pending I/O of bfq_queues that,
according to their timestamps, have to be served after Q. If an
uncontrolled amount of I/O from the latter bfq_queues were dispatched
while Q is waiting for its new I/O to arrive, then Q's bandwidth
guarantees would be violated. To prevent this, I/O dispatch is plugged
until Q receives new I/O (except for a properly controlled amount of
injected I/O). Unfortunately, preemption breaks I/O-dispatch plugging,
for the following reason.
Preemption is performed in two steps. First, Q is expired and
re-scheduled. Second, the new bfq_queue to serve is chosen. The first
step is needed by the second, as the second can be performed only
after Q's timestamps have been properly updated (done in the
expiration step), and Q has been re-queued for service. This
dependency is a consequence of the way how BFQ's scheduling algorithm
is currently implemented.
But Q is not re-scheduled at all in the first step, because Q is
empty. As a consequence, an uncontrolled amount of I/O may be
dispatched until Q becomes non empty again. This breaks Q's service
guarantees.
This commit addresses this issue by re-scheduling Q even if it is
empty. This in turn breaks the assumption that all scheduled queues
are non empty. Then a few extra checks are now needed.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BFQ enqueues the I/O coming from each process into a separate
bfq_queue, and serves bfq_queues one at a time. Each bfq_queue may be
served for at most timeout_sync milliseconds (default: 125 ms). This
service scheme is prone to the following inaccuracy.
While a bfq_queue Q1 is in service, some empty bfq_queue Q2 may
receive I/O, and, according to BFQ's scheduling policy, may become the
right bfq_queue to serve, in place of the currently in-service
bfq_queue. In this respect, postponing the service of Q2 to after the
service of Q1 finishes may delay the completion of Q2's I/O, compared
with an ideal service in which all non-empty bfq_queues are served in
parallel, and every non-empty bfq_queue is served at a rate
proportional to the bfq_queue's weight. This additional delay is equal
at most to the time Q1 may unjustly remain in service before switching
to Q2.
If Q1 and Q2 have the same weight, then this time is most likely
negligible compared with the completion time to be guaranteed to Q2's
I/O. In addition, first, one of the reasons why BFQ may want to serve
Q1 for a while is that this boosts throughput and, second, serving Q1
longer reduces BFQ's overhead. As a conclusion, it is usually better
not to preempt Q1 if both Q1 and Q2 have the same weight.
In contrast, as Q2's weight or priority becomes higher and higher
compared with that of Q1, the above delay becomes larger and larger,
compared with the I/O completion times that have to be guaranteed to
Q2 according to Q2's weight. So reducing this delay may be more
important than avoiding the costs of preempting Q1.
Accordingly, this commit preempts Q1 if Q2 has a higher weight or a
higher priority than Q1. Preemption causes Q1 to be re-scheduled, and
triggers a new choice of the next bfq_queue to serve. If Q2 really is
the next bfq_queue to serve, then Q2 will be set in service
immediately.
This change reduces the component of the I/O latency caused by the
above delay by about 80%. For example, on an (old) PLEXTOR PX-256M5
SSD, the maximum latency reported by fio drops from 15.1 to 3.2 ms for
a process doing sporadic random reads while another process is doing
continuous sequential reads.
Signed-off-by: Nicola Bottura <bottura.nicola95@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A bfq_queue Q may happen to be synchronized with another
bfq_queue Q2, i.e., the I/O of Q2 may need to be completed for Q to
receive new I/O. We call Q2 "waker queue".
If I/O plugging is being performed for Q, and Q is not receiving any
more I/O because of the above synchronization, then, thanks to BFQ's
injection mechanism, the waker queue is likely to get served before
the I/O-plugging timeout fires.
Unfortunately, this fact may not be sufficient to guarantee a high
throughput during the I/O plugging, because the inject limit for Q may
be too low to guarantee a lot of injected I/O. In addition, the
duration of the plugging, i.e., the time before Q finally receives new
I/O, may not be minimized, because the waker queue may happen to be
served only after other queues.
To address these issues, this commit introduces the explicit detection
of the waker queue, and the unconditional injection of a pending I/O
request of the waker queue on each invocation of
bfq_dispatch_request().
One may be concerned that this systematic injection of I/O from the
waker queue delays the service of Q's I/O. Fortunately, it doesn't. On
the contrary, next Q's I/O is brought forward dramatically, for it is
not blocked for milliseconds.
Reported-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Tested-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Until the base value for request service times gets finally computed
for a bfq_queue, the inject limit for that queue does depend on the
think-time state (short|long) of the queue. A timely update of the
think time then guarantees a quicker activation or deactivation of the
injection. Fortunately, the think time of a bfq_queue is updated in
the same code path as the inject limit; but after the inject limit.
This commits moves the update of the think time before the update of
the inject limit. For coherence, it moves the update of the seek time
too.
Reported-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Tested-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
I/O injection gets reduced if it increases the request service times
of the victim queue beyond a certain threshold. The threshold, in its
turn, is computed as a function of the base service time enjoyed by
the queue when it undergoes no injection.
As a consequence, for injection to work properly, the above base value
has to be accurate. In this respect, such a value may vary over
time. For example, it varies if the size or the spatial locality of
the I/O requests in the queue change. It is then important to update
this value whenever possible. This commit performs this update.
Reported-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Tested-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
One of the cases where the parameters for injection may be updated is
when there are no more in-flight I/O requests. The number of in-flight
requests is stored in the field bfqd->rq_in_driver of the descriptor
bfqd of the device. So, the controlled condition is
bfqd->rq_in_driver == 0.
Unfortunately, this is wrong because, the instruction that checks this
condition is in the code path that handles the completion of a
request, and, in particular, the instruction is executed before
bfqd->rq_in_driver is decremented in such a code path.
This commit fixes this issue by just replacing 0 with 1 in the
comparison.
Reported-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Tested-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Until the base value of the request service times gets finally
computed for a bfq_queue, the inject limit does depend on the
think-time state (short|long). The limit must be 0 or 1 if the think
time is deemed, respectively, as short or long. However, such a check
and possible limit update is performed only periodically, once per
second. So, to make the injection mechanism much more reactive, this
commit performs the update also every time the think-time state
changes.
In addition, in the following special case, this commit lets the
inject limit of a bfq_queue bfqq remain equal to 1 even if bfqq's
think time is short: bfqq's I/O is synchronized with that of some
other queue, i.e., bfqq may receive new I/O only after the I/O of the
other queue is completed. Keeping the inject limit to 1 allows the
blocking I/O to be served while bfqq is in service. And this is very
convenient both for bfqq and for the total throughput, as explained
in detail in the comments in bfq_update_has_short_ttime().
Reported-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Tested-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve the print_req_error with additional request fields which are
helpful for debugging. Use newly introduced blk_op_str() to print the
REQ_OP_XXX in the string format.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that we've a helper function blk_op_str() to convert the
REQ_OP_XXX to string XXX, adjust the code to use that. Get rid of
the duplicate array op_name which is now present in the blk-core.c
which we renamed it to "blk_op_name" and open coding in the
blk-mq-debugfs.c.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In order to centralize the REQ_OP_XXX to string conversion which can be
used in the block layer and different places in the kernel like f2fs,
this patch adds a new helper function along with an array similar to the
one present in the blk-mq-debugfs.c.
We keep this helper functionality centralize under blk-core.c instead of
blk-mq-debugfs.c since blk-core.c is configured using CONFIG_BLOCK and
it will not be dependent on blk-mq-debugfs.c which is configured using
CONFIG_BLK_DEBUG_FS.
Next patch adjusts the code in the blk-mq-debugfs.c with newly
introduced helper.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Print the calling function instead of print_req_error as a prefix, and
print the operation and op_flags separately instead of the whole field.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This option is entirely bfq specific, give it an appropinquate name.
Also make it depend on CONFIG_BFQ_GROUP_IOSCHED in Kconfig, as all
the functionality already does so anyway.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function was moved from core block code and is way to generic.
Fold it into the only caller and simplify it based on the actually
passed arguments.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This structure and assorted infrastructure is only used by the bfq I/O
scheduler. Move it there instead of bloating the common code.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When sampling the blkcg counts we don't need atomics or per-cpu
variables. Introduce a new structure just containing plain u64
counters.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Returning a structure generates rather bad code, so switch to passing
by reference. Also don't require the structure to be zeroed and add
to the 0-initialized counters, but actually set the counters to the
calculated value.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Trying to break up the crazy statements to something readable.
Also switch to an unsigned counter as it can't ever turn negative.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function just has a few trivial assignments, has two callers with
one of them being in the fastpath.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that we don't need to assign the front/back segment sizes, we can
duplicating the segs assignment for the split vs no-split case and
remove a whole chunk of boilerplate code.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Return the segement and let the callers assign them, which makes the code
a littler more obvious. Also pass the request instead of q plus bio
chain, allowing for the use of rq_for_each_bvec.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We only need the number of segments in the blk-mq submission path.
Remove the field from struct bio, and return it from a variant of
blk_queue_split instead of that it can passed as an argument to
those functions that need the value.
This also means we stop recounting segments except for cloning
and partial segments.
To keep the number of arguments in this how path down remove
pointless struct request_queue arguments from any of the functions
that had it and grew a nr_segs argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
lightnvm should have never used this function, as it is sending
passthrough requests, so switch it to blk_rq_append_bio like all the
other passthrough request users. Inline blk_init_request_from_bio into
the only remaining caller.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The priority field also makes sense for passthrough requests, so
initialize it in blk_rq_bio_prep.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As is, iolatency recognizes done_bio and cleanup as ending paths. If a
request is marked REQ_NOWAIT and fails to get a request, the bio is
cleaned up via rq_qos_cleanup() and ended in bio_wouldblock_error().
This results in underflowing the inflight counter. Fix this by only
accounting bios that were actually submitted.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit a1ce35fa49 ("block: remove dead elevator code")
deleted blk_end_request() and friends, but some declaration are still
left. Purge them.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a pure code cleanup patch and doesn't change any functionality.
Having multiple coding styles in the code creates confusion when
someone tries to add a new code.
Make queue_poll_stat_show() consistent by adding spaces around binary
operators with the rest of the code.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In function __blk_mq_debugfs_rq_show variable op has unsigned int type.
Since op can never be negative use %u format specifier to match the
variable type.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a pure code cleanup patch and doesn't change any functionality.
This removes the redundant else in the code which is not needed since
we are returning from function anyway.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a pure code cleanup patch and doesn't change any functionality.
In block layer to identify the request operation req_op() macro is
used, so change the open coding the req_op() in the blk-mq-debugfs.c.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When multiple iovecs reference the same page, each get_user_page call
will add a reference to the page. But once we've created the bio that
information gets lost and only a single reference will be dropped after
I/O completion. Use the same_page information returned from
__bio_try_merge_page to drop additional references to pages that were
already present in the bio.
Based on a patch from Ming Lei.
Link: https://lkml.org/lkml/2019/4/23/64
Fixes: 576ed913 ("block: use bio_add_page in bio_iov_iter_get_pages")
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently have an input same_page parameter to __bio_try_merge_page
to prohibit merging in the same page. The rationale for that is that
some callers need to account for every page added to a bio. Instead of
letting these callers call twice into the merge code to account for the
new vs existing page cases, just turn the paramter into an output one that
returns if a merge in the same page occured and let them act accordingly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When blkcg_activate_policy() is creating blkg_policy_data for existing
blkgs, it did in the wrong order - descendants first. Fix it. None
of the existing controllers seem affected by this.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkg alloc is performed as a separate step from the rest of blkg
creation so that GFP_KERNEL allocations can be used when creating
blkgs from configuration file writes because otherwise user actions
may fail due to failures of opportunistic GFP_NOWAIT allocations.
While making blkgs use percpu_ref, 7fcf2b033b ("blkcg: change blkg
reference counting to use percpu_ref") incorrectly added unconditional
opportunistic percpu_ref_init() to blkg_create() breaking this
guarantee.
This patch moves percpu_ref_init() to blkg_alloc() so makes it use
@gfp_mask that blkg_alloc() is called with. Also, percpu_ref_exit()
is moved to blkg_free() for consistency.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 7fcf2b033b ("blkcg: change blkg reference counting to use percpu_ref")
Cc: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Depending on the number of devices, blkcg stats can go over the
default seqfile buf size. seqfile normally retries with a larger
buffer but since the ->pd_stat() addition, blkcg_print_stat() doesn't
tell seqfile that overflow has happened and the output gets printed
truncated. Fix it by calling seq_commit() w/ -1 on possible
overflows.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 903d23f0a3 ("blk-cgroup: allow controllers to output their own stats")
Cc: stable@vger.kernel.org # v4.19+
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If use_delay was non-zero when the latency target of a cgroup was set
to zero, it will stay stuck until io.latency is enabled on the cgroup
again. This keeps readahead disabled for the cgroup impacting
performance negatively.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <jbacik@fb.com>
Fixes: d706751215 ("block: introduce blk-iolatency io controller")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct bio_map_data {
...
struct iovec iov[];
};
instance = kmalloc(sizeof(sizeof(struct bio_map_data) + sizeof(struct iovec) *
count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kmalloc(struct_size(instance, iov, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.
So, replace the following form:
sizeof(*new_ptbl) + target * sizeof(new_ptbl->part[0])
with:
struct_size(new_ptbl, part, target)
Also, notice that variable size is unnecessary, hence it is removed.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
struct blk_rq_stat::mean is a u64 value, so use %llu
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert the cgroup-v1 files to ReST format, in order to
allow a later addition to the admin-guide.
The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
blk_mq_sched_free_requests() may be called in failure path in which
q->elevator may not be setup yet, so remove WARN_ON(!q->elevator) from
blk_mq_sched_free_requests for avoiding the false positive.
This function is actually safe to call in case of !q->elevator because
hctx->sched_tags is checked.
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yi Zhang <yi.zhang@redhat.com>
Fixes: c3e2219216 ("block: free sched's request pool in blk_cleanup_queue")
Reported-by: syzbot+b9d0d56867048c7bcfde@syzkaller.appspotmail.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
When all of these checks are cleaned up, lots of the functions used in
the blk-mq-debugfs code can now return void, as no need to check the
return value of them either.
Overall, this ends up cleaning up the code and making it smaller, always
a nice win.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In most use cases of zoned block devices (aka SMR disks), the
mq-deadline scheduler is mandatory as it implements sequential write
command processing guarantees with zone write locking. So make sure that
this scheduler is always enabled if CONFIG_BLK_DEV_ZONED is selected.
Tested-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's some discussion on how to do this the best, and Tejun prefers
that BFQ just create the file itself instead of having cgroups support
a symlink feature.
Hence revert commit 54b7b868e8 and 19e9da9e86 for 5.2, and this
can be done properly for 5.3.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Many userspace tools and services use the proportional-share policy of
the blkio/io cgroups controller. The CFQ I/O scheduler implemented
this policy for the legacy block layer. To modify the weight of a
group in case CFQ was in charge, the 'weight' parameter of the group
must be modified. On the other hand, the BFQ I/O scheduler implements
the same policy in blk-mq, but, with BFQ, the parameter to modify has
a different name: bfq.weight (forced choice until legacy block was
present, because two different policies cannot share a common parameter
in cgroups).
Due to CFQ legacy, most if not all userspace configurations still use
the parameter 'weight', and for the moment do not seem likely to be
changed. But, when CFQ went away with legacy block, such a parameter
ceased to exist.
So, a simple workaround has been proposed [1] to make all
configurations work: add a symlink, named weight, to bfq.weight. This
commit adds such a symlink.
[1] https://lkml.org/lkml/2019/4/8/555
Suggested-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In theory, IO scheduler belongs to request queue, and the request pool
of sched tags belongs to the request queue too.
However, the current tags allocation interfaces are re-used for both
driver tags and sched tags, and driver tags is definitely host wide,
and doesn't belong to any request queue, same with its request pool.
So we need tagset instance for freeing request of sched tags.
Meantime, blk_mq_free_tag_set() often follows blk_cleanup_queue() in case
of non-BLK_MQ_F_TAG_SHARED, this way requires that request pool of sched
tags to be freed before calling blk_mq_free_tag_set().
Commit 47cdee29ef ("block: move blk_exit_queue into __blk_release_queue")
moves blk_exit_queue into __blk_release_queue for simplying the fast
path in generic_make_request(), then causes oops during freeing requests
of sched tags in __blk_release_queue().
Fix the above issue by move freeing request pool of sched tags into
blk_cleanup_queue(), this way is safe becasue queue has been frozen and no any
in-queue requests at that time. Freeing sched tags has to be kept in queue's
release handler becasue there might be un-completed dispatch activity
which might refer to sched tags.
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Fixes: 47cdee29ef ("block: move blk_exit_queue into __blk_release_queue")
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IS_ERR(_OR_NULL) already contain an 'unlikely' compiler flag,
so no need to do that again from its callers. Drop it.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While troubleshooting issues where cloned request limits have been
exceeded, it is often beneficial to know the actual values that
have been breached. Print these values, assisting in ease of
identification of root cause of the breach.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: John Pittman <jpittman@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Document the meaning of the blk_mq_hw_queue_to_node() arguments.
Reviewed-by: Chaitanya Kulkarni <chiatanya.kulkarni@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change one occurrence of 'performace' into 'performance'.
Cc: Max Gurtovoy <maxg@mellanox.com>
Fixes: fe631457ff ("blk-mq: map all HWQ also in hyperthreaded system") # v4.13.
Reviewed-by: Chaitanya Kulkarni <chiatanya.kulkarni@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch avoids that the kernel-doc script complains about these
function headers when building with W=1.
Cc: Hannes Reinecke <hare@suse.com>
Cc: Keith Busch <keith.busch@intel.com>
Fixes: ed76e329d7 ("blk-mq: abstract out queue map") # v5.0.
Fixes: e42b3867de ("blk-mq-rdma: pass in queue map to blk_mq_rdma_map_queues") # v5.0.
Reviewed-by: Chaitanya Kulkarni <chiatanya.kulkarni@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch avoids that the kernel-doc tool warns about this function
header when building with W=1.
Reviewed-by: Chaitanya Kulkarni <chiatanya.kulkarni@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch avoids that the kernel-doc tool warns about this function
header when building with W=1.
Reviewed-by: Chaitanya Kulkarni <chiatanya.kulkarni@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If blk_mq_init_allocated_queue() fails, make sure to free the poll
stat callback struct allocated.
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now a063057d7c ("block: Fix a race between request queue removal and
the block cgroup controller") has been reverted, and blkcg_exit_queue()
won't be called in blk_cleanup_queue() any more.
So don't need to protect generic_make_request_checks() with
blk_queue_enter(), then the total mess can be cleaned.
37f9579f4c ("blk-mq: Avoid that submitting a bio concurrently with device
removal triggers a crash") is reverted.
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 498f6650ae ("block: Fix a race between the cgroup code and
request queue initialization") moves what blk_exit_queue does into
blk_cleanup_queue() for fixing issue caused by changing back
queue lock.
However, after legacy request IO path is killed, driver queue lock
won't be used at all, and there isn't story for changing back
queue lock. Then the issue addressed by Commit 498f6650ae doesn't
exist any more.
So move move blk_exit_queue into __blk_release_queue.
This patch basically reverts the following two commits:
498f6650ae block: Fix a race between the cgroup code and request queue initialization
24ecc35853 block: Ensure that a request queue is dissociated from the cgroup controller
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The following is a description of a hang in blk_mq_freeze_queue_wait().
The hang happens on attempt to freeze a queue while another task does
queue unfreeze.
The root cause is an incorrect sequence of percpu_ref_resurrect() and
percpu_ref_kill() and as a result those two can be swapped:
CPU#0 CPU#1
---------------- -----------------
q1 = blk_mq_init_queue(shared_tags)
q2 = blk_mq_init_queue(shared_tags):
blk_mq_add_queue_tag_set(shared_tags):
blk_mq_update_tag_set_depth(shared_tags):
list_for_each_entry()
blk_mq_freeze_queue(q1)
> percpu_ref_kill()
> blk_mq_freeze_queue_wait()
blk_cleanup_queue(q1)
blk_mq_freeze_queue(q1)
> percpu_ref_kill()
^^^^^^ freeze_depth can't guarantee the order
blk_mq_unfreeze_queue()
> percpu_ref_resurrect()
> blk_mq_freeze_queue_wait()
^^^^^^ Hang here!!!!
This wrong sequence raises kernel warning:
percpu_ref_kill_and_confirm called more than once on blk_queue_usage_counter_release!
WARNING: CPU: 0 PID: 11854 at lib/percpu-refcount.c:336 percpu_ref_kill_and_confirm+0x99/0xb0
But the most unpleasant effect is a hang of a blk_mq_freeze_queue_wait(),
which waits for a zero of a q_usage_counter, which never happens
because percpu-ref was reinited (instead of being killed) and stays in
PERCPU state forever.
How to reproduce:
- "insmod null_blk.ko shared_tags=1 nr_devices=0 queue_mode=2"
- cpu0: python Script.py 0; taskset the corresponding process running on cpu0
- cpu1: python Script.py 1; taskset the corresponding process running on cpu1
Script.py:
------
#!/usr/bin/python3
import os
import sys
while True:
on = "echo 1 > /sys/kernel/config/nullb/%s/power" % sys.argv[1]
off = "echo 0 > /sys/kernel/config/nullb/%s/power" % sys.argv[1]
os.system(on)
os.system(off)
------
This bug was first reported and fixed by Roman, previous discussion:
[1] Message id: 1443287365-4244-7-git-send-email-akinobu.mita@gmail.com
[2] Message id: 1443563240-29306-6-git-send-email-tj@kernel.org
[3] https://patchwork.kernel.org/patch/9268199/
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
At this point these fields aren't used for anything, so we can remove
them.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We fundamentally do not have a maximum segement size for devices with a
virt boundary. So don't bother checking it, especially given that the
existing checks didn't properly work to start with as we never fully
update the front/back segment size and miss the bi_seg_front_size that
wuld have been required for some cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently fail to update the front/back segment size in the bio when
deciding to allow an otherwise gappy segement to a device with a
virt boundary. The reason why this did not cause problems is that
devices with a virt boundary fundamentally don't use segments as we
know it and thus don't care. Make that assumption formal by forcing
an unlimited segement size in this case.
Fixes: f6970f83ef ("block: don't check if adjacent bvecs in one bio can be mergeable")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently ll_merge_requests_fn, unlike all other merge functions,
reduces nr_phys_segments by one if the last segment of the previous,
and the first segment of the next segement are contigous. While this
seems like a nice solution to avoid building smaller than possible
requests it causes a mismatch between the segments actually present
in the request and those iterated over by the bvec iterators, including
__rq_for_each_bio. This can for example mistrigger the single segment
optimization in the nvme-pci driver, and might lead to mismatching
nr_phys_segments number when recalculating the number of request
when inserting a cloned request.
We could possibly work around this by making the bvec iterators take
the front and back segment size into account, but that would require
moving them from the bio to the bio_iter and spreading this mess
over all users of bvecs. Or we could simply remove this optimization
under the assumption that most users already build good enough bvecs,
and that the bio merge patch never cared about this optimization
either. The latter is what this patch does.
dff824b2aa ("nvme-pci: optimize mapping of small single segment requests").
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=ZKv1
-----END PGP SIGNATURE-----
Merge tag 'for-5.2/block-post-20190516' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"This is mainly some late lightnvm changes that came in just before the
merge window, as well as fixes that have been queued up since the
initial pull request was frozen.
This contains:
- lightnvm changes, fixing race conditions, improving memory
utilization, and improving pblk compatability (Chansol, Igor,
Marcin)
- NVMe pull request with minor fixes all over the map (via Christoph)
- remove redundant error print in sata_rcar (Geert)
- struct_size() cleanup (Jackie)
- dasd CONFIG_LBADF warning fix (Ming)
- brd cond_resched() improvement (Mikulas)"
* tag 'for-5.2/block-post-20190516' of git://git.kernel.dk/linux-block: (41 commits)
block/bio-integrity: use struct_size() in kmalloc()
nvme: validate cntlid during controller initialisation
nvme: change locking for the per-subsystem controller list
nvme: trace all async notice events
nvme: fix typos in nvme status code values
nvme-fabrics: remove unused argument
nvme-multipath: avoid crash on invalid subsystem cntlid enumeration
nvme-fc: use separate work queue to avoid warning
nvme-rdma: remove redundant reference between ib_device and tagset
nvme-pci: mark expected switch fall-through
nvme-pci: add known admin effects to augument admin effects log page
nvme-pci: init shadow doorbell after each reset
brd: add cond_resched to brd_free_pages
sata_rcar: Remove ata_host_alloc() error printing
s390/dasd: fix build warning in dasd_eckd_build_cp_raw
lightnvm: pblk: use nvm_rq_to_ppa_list()
lightnvm: pblk: simplify partial read path
lightnvm: do not remove instance under global lock
lightnvm: track inflight target creations
lightnvm: pblk: recover only written metadata
...
Use the new struct_size() helper to keep code simple.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=Ot0g
-----END PGP SIGNATURE-----
Merge tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Nothing major in this series, just fixes and improvements all over the
map. This contains:
- Series of fixes for sed-opal (David, Jonas)
- Fixes and performance tweaks for BFQ (via Paolo)
- Set of fixes for bcache (via Coly)
- Set of fixes for md (via Song)
- Enabling multi-page for passthrough requests (Ming)
- Queue release fix series (Ming)
- Device notification improvements (Martin)
- Propagate underlying device rotational status in loop (Holger)
- Removal of mtip32xx trim support, which has been disabled for years
(Christoph)
- Improvement and cleanup of nvme command handling (Christoph)
- Add block SPDX tags (Christoph)
- Cleanup/hardening of bio/bvec iteration (Christoph)
- A few NVMe pull requests (Christoph)
- Removal of CONFIG_LBDAF (Christoph)
- Various little fixes here and there"
* tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block: (164 commits)
block: fix mismerge in bvec_advance
block: don't drain in-progress dispatch in blk_cleanup_queue()
blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release
blk-mq: always free hctx after request queue is freed
blk-mq: split blk_mq_alloc_and_init_hctx into two parts
blk-mq: free hw queue's resource in hctx's release handler
blk-mq: move cancel of requeue_work into blk_mq_release
blk-mq: grab .q_usage_counter when queuing request from plug code path
block: fix function name in comment
nvmet: protect discovery change log event list iteration
nvme: mark nvme_core_init and nvme_core_exit static
nvme: move command size checks to the core
nvme-fabrics: check more command sizes
nvme-pci: check more command sizes
nvme-pci: remove an unneeded variable initialization
nvme-pci: unquiesce admin queue on shutdown
nvme-pci: shutdown on timeout during deletion
nvme-pci: fix psdt field for single segment sgls
nvme-multipath: don't print ANA group state by default
nvme-multipath: split bios with the ns_head bio_set before submitting
...
Here is the "big" set of driver core patches for 5.2-rc1
There are a number of ACPI patches in here as well, as Rafael said they
should go through this tree due to the driver core changes they
required. They have all been acked by the ACPI developers.
There are also a number of small subsystem-specific changes in here, due
to some changes to the kobject core code. Those too have all been acked
by the various subsystem maintainers.
As for content, it's pretty boring outside of the ACPI changes:
- spdx cleanups
- kobject documentation updates
- default attribute groups for kobjects
- other minor kobject/driver core fixes
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHDbw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynDAgCfbb4LBR6I50wFXb8JM/R6cAS7qrsAn1unshKV
8XCYcif2RxjtdJWXbjdm
=/rLh
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core/kobject updates from Greg KH:
"Here is the "big" set of driver core patches for 5.2-rc1
There are a number of ACPI patches in here as well, as Rafael said
they should go through this tree due to the driver core changes they
required. They have all been acked by the ACPI developers.
There are also a number of small subsystem-specific changes in here,
due to some changes to the kobject core code. Those too have all been
acked by the various subsystem maintainers.
As for content, it's pretty boring outside of the ACPI changes:
- spdx cleanups
- kobject documentation updates
- default attribute groups for kobjects
- other minor kobject/driver core fixes
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits)
kobject: clean up the kobject add documentation a bit more
kobject: Fix kernel-doc comment first line
kobject: Remove docstring reference to kset
firmware_loader: Fix a typo ("syfs" -> "sysfs")
kobject: fix dereference before null check on kobj
Revert "driver core: platform: Fix the usage of platform device name(pdev->name)"
init/config: Do not select BUILD_BIN2C for IKCONFIG
Provide in-kernel headers to make extending kernel easier
kobject: Improve doc clarity kobject_init_and_add()
kobject: Improve docs for kobject_add/del
driver core: platform: Fix the usage of platform device name(pdev->name)
livepatch: Replace klp_ktype_patch's default_attrs with groups
cpufreq: schedutil: Replace default_attrs field with groups
padata: Replace padata_attr_type default_attrs field with groups
irqdesc: Replace irq_kobj_type's default_attrs field with groups
net-sysfs: Replace ktype default_attrs field with groups
block: Replace all ktype default_attrs with groups
samples/kobject: Replace foo_ktype's default_attrs field with groups
kobject: Add support for default attribute groups to kobj_type
driver core: Postpone DMA tear-down until after devres release for probe failure
...
Now freeing hw queue resource is moved to hctx's release handler,
we don't need to worry about the race between blk_cleanup_queue and
run queue any more.
So don't drain in-progress dispatch in blk_cleanup_queue().
This is basically revert of c2856ae2f3 ("blk-mq: quiesce queue before
freeing queue").
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org,
Cc: Martin K . Petersen <martin.petersen@oracle.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
hctx is always released after requeue is freed.
With holding queue's kobject refcount, it is safe for driver to run queue,
so one run queue might be scheduled after blk_sync_queue() is done.
So moving the cancel of hctx->run_work into blk_mq_hw_sysfs_release()
for avoiding run released queue.
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org,
Cc: Martin K . Petersen <martin.petersen@oracle.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In normal queue cleanup path, hctx is released after request queue
is freed, see blk_mq_release().
However, in __blk_mq_update_nr_hw_queues(), hctx may be freed because
of hw queues shrinking. This way is easy to cause use-after-free,
because: one implicit rule is that it is safe to call almost all block
layer APIs if the request queue is alive; and one hctx may be retrieved
by one API, then the hctx can be freed by blk_mq_update_nr_hw_queues();
finally use-after-free is triggered.
Fixes this issue by always freeing hctx after releasing request queue.
If some hctxs are removed in blk_mq_update_nr_hw_queues(), introduce
a per-queue list to hold them, then try to resuse these hctxs if numa
node is matched.
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org,
Cc: Martin K . Petersen <martin.petersen@oracle.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split blk_mq_alloc_and_init_hctx into two parts, and one is
blk_mq_alloc_hctx() for allocating all hctx resources, another
is blk_mq_init_hctx() for initializing hctx, which serves as
counter-part of blk_mq_exit_hctx().
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org
Cc: Martin K . Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Once blk_cleanup_queue() returns, tags shouldn't be used any more,
because blk_mq_free_tag_set() may be called. Commit 45a9c9d909
("blk-mq: Fix a use-after-free") fixes this issue exactly.
However, that commit introduces another issue. Before 45a9c9d909,
we are allowed to run queue during cleaning up queue if the queue's
kobj refcount is held. After that commit, queue can't be run during
queue cleaning up, otherwise oops can be triggered easily because
some fields of hctx are freed by blk_mq_free_queue() in blk_cleanup_queue().
We have invented ways for addressing this kind of issue before, such as:
8dc765d438 ("SCSI: fix queue cleanup race before queue initialization is done")
c2856ae2f3 ("blk-mq: quiesce queue before freeing queue")
But still can't cover all cases, recently James reports another such
kind of issue:
https://marc.info/?l=linux-scsi&m=155389088124782&w=2
This issue can be quite hard to address by previous way, given
scsi_run_queue() may run requeues for other LUNs.
Fixes the above issue by freeing hctx's resources in its release handler, and this
way is safe becasue tags isn't needed for freeing such hctx resource.
This approach follows typical design pattern wrt. kobject's release handler.
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org,
Cc: Martin K . Petersen <martin.petersen@oracle.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
Reported-by: James Smart <james.smart@broadcom.com>
Fixes: 45a9c9d909 ("blk-mq: Fix a use-after-free")
Cc: stable@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With holding queue's kobject refcount, it is safe for driver
to schedule requeue. However, blk_mq_kick_requeue_list() may
be called after blk_sync_queue() is done because of concurrent
requeue activities, then requeue work may not be completed when
freeing queue, and kernel oops is triggered.
So moving the cancel of requeue_work into blk_mq_release() for
avoiding race between requeue and freeing queue.
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org,
Cc: Martin K . Petersen <martin.petersen@oracle.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just like aio/io_uring, we need to grab 2 refcount for queuing one
request, one is for submission, another is for completion.
If the request isn't queued from plug code path, the refcount grabbed
in generic_make_request() serves for submission. In theroy, this
refcount should have been released after the sumission(async run queue)
is done. blk_freeze_queue() works with blk_sync_queue() together
for avoiding race between cleanup queue and IO submission, given async
run queue activities are canceled because hctx->run_work is scheduled with
the refcount held, so it is fine to not hold the refcount when
running the run queue work function for dispatch IO.
However, if request is staggered into plug list, and finally queued
from plug code path, the refcount in submission side is actually missed.
And we may start to run queue after queue is removed because the queue's
kobject refcount isn't guaranteed to be grabbed in flushing plug list
context, then kernel oops is triggered, see the following race:
blk_mq_flush_plug_list():
blk_mq_sched_insert_requests()
insert requests to sw queue or scheduler queue
blk_mq_run_hw_queue
Because of concurrent run queue, all requests inserted above may be
completed before calling the above blk_mq_run_hw_queue. Then queue can
be freed during the above blk_mq_run_hw_queue().
Fixes the issue by grab .q_usage_counter before calling
blk_mq_sched_insert_requests() in blk_mq_flush_plug_list(). This way is
safe because the queue is absolutely alive before inserting request.
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: linux-scsi@vger.kernel.org,
Cc: Martin K . Petersen <martin.petersen@oracle.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The comment was out of date.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Various block layer files do not have any licensing information at all.
Add SPDX tags for the default kernel GPLv2 license to those.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All these files have some form of the usual GPLv2 or later boilerplate.
Switch them to use SPDX tags instead.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All these files have some form of the usual GPLv2 boilerplate. Switch
them to use SPDX tags instead.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Share the bi_size update by moving the done label up, and duplicate
the bv_len update in the two callers to get rid of the bvec_merge
label.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We are never called with file system pages by defintions for the
passthrough interface, and we also never undo any addition later
these days.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The same page optimization is a rather odd corner case, which is not
used outside bio.c and which really should not be used outside of bio.c
either - we have better highlevel helpers like the rq/bio mapping
helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We only have two callers that need the integer loop iterator, and they
can easily maintain it themselves.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Coly Li <colyli@suse.de>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The kobj_type default_attrs field is being replaced by the
default_groups field. Replace all of the ktype default_attrs fields in
the block subsystem with default_groups and use the ATTRIBUTE_GROUPS
macro to create the default groups.
Remove default_ctx_attrs[] because it doesn't contain any attributes.
This patch was tested by verifying that the sysfs files for the
attributes in the default groups were created.
Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The refcount has been increased for pages retrieved from non-bvec iov iter
via __bio_iov_iter_get_pages(), so don't need to do that again.
Otherwise, IO pages are leaked easily.
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Fixes: 7321ecbfc7 ("block: change how we get page references in bio_iov_iter_get_pages")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_add_page() and __bio_add_page() are capable of adding pages into
bio, and now we have at least two such usages alreay:
- __bio_iov_bvec_add_pages()
- nvmet_bdev_execute_rw().
So update comments on these two helpers.
The thing is a bit special for __bio_try_merge_page(), given the caller
needs to know if the new added page is same with the last added page,
then it isn't safe to pass multi-page in case that 'same_page' is true,
so adds warning on potential misuse, and updates comment on
__bio_try_merge_page().
Cc: linux-xfs@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the low level driver has no timeout handler, the
/sys/block/<disk>/queue/io_timeout will not be displayed.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While we generally allow scatterlists to have offsets larger than page
size for an entry, and other subsystems like the crypto code make use of
that, the block layer isn't quite ready for that. Flip the switch back
to avoid them for now, and revisit that decision early in a merge window
once the known offenders are fixed.
Fixes: 8a96a0e408 ("block: rewrite blk_bvec_map_sg to avoid a nth_page call")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit 2da78092dd "block: Fix dev_t minor allocation lifetime"
specifically moved blk_free_devt(dev->devt) call to part_release()
to avoid reallocating device number before the device is fully
shutdown.
However, it can cause use-after-free on gendisk in get_gendisk().
We use md device as example to show the race scenes:
Process1 Worker Process2
md_free
blkdev_open
del_gendisk
add delete_partition_work_fn() to wq
__blkdev_get
get_gendisk
put_disk
disk_release
kfree(disk)
find part from ext_devt_idr
get_disk_and_module(disk)
cause use after free
delete_partition_work_fn
put_device(part)
part_release
remove part from ext_devt_idr
Before <devt, hd_struct pointer> is removed from ext_devt_idr by
delete_partition_work_fn(), we can find the devt and then access
gendisk by hd_struct pointer. But, if we access the gendisk after
it have been freed, it can cause in use-after-freeon gendisk in
get_gendisk().
We fix this by adding a new helper blk_invalidate_devt() in
delete_partition() and del_gendisk(). It replaces hd_struct
pointer in idr with value 'NULL', and deletes the entry from
idr in part_release() as we do now.
Thanks to Jan Kara for providing the solution and more clear comments
for the code.
Fixes: 2da78092dd ("block: Fix dev_t minor allocation lifetime")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAly8rGYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGmZMH/1IRB0E1Qmzz8yzw
wj79UuRGYPqxDDSWW+wNc8sU4Ic7iYirn9APHAztCdQqsjmzU/OVLfSa3JhdBe5w
THo7pbGKBqEDcWnKfNk/21jXFNLZ1vr9BoQv2DGU2MMhHAyo/NZbalo2YVtpQPmM
OCRth5n+LzvH7rGrX7RYgWu24G9l3NMfgtaDAXBNXesCGFAjVRrdkU5CBAaabvtU
4GWh/nnutndOOLdByL3x+VZ3H3fIBnbNjcIGCglvvqzk7h3hrfGEl4UCULldTxcM
IFsfMUhSw1ENy7F6DHGbKIG90cdCJcrQ8J/ziEzjj/KLGALluutfFhVvr6YCM2J6
2RgU8CY=
=CfY1
-----END PGP SIGNATURE-----
Merge tag 'v5.1-rc6' into for-5.2/block
Pull in v5.1-rc6 to resolve two conflicts. One is in BFQ, in just a
comment, and is trivial. The other one is a conflict due to a later fix
in the bio multi-page work, and needs a bit more care.
* tag 'v5.1-rc6': (770 commits)
Linux 5.1-rc6
block: make sure that bvec length can't be overflow
block: kill all_q_node in request_queue
x86/cpu/intel: Lower the "ENERGY_PERF_BIAS: Set to normal" message's log priority
coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping
mm/kmemleak.c: fix unused-function warning
init: initialize jump labels before command line option parsing
kernel/watchdog_hld.c: hard lockup message should end with a newline
kcov: improve CONFIG_ARCH_HAS_KCOV help text
mm: fix inactive list balancing between NUMA nodes and cgroups
mm/hotplug: treat CMA pages as unmovable
proc: fixup proc-pid-vm test
proc: fix map_files test on F29
mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n
mm/memory_hotplug: do not unlock after failing to take the device_hotplug_lock
mm: swapoff: shmem_unuse() stop eviction without igrab()
mm: swapoff: take notice of completion sooner
mm: swapoff: remove too limiting SWAP_UNUSE_MAX_TRIES
mm: swapoff: shmem_find_swap_entries() filter out other types
slab: store tagged freelist for off-slab slabmgmt
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit moved the shallow depth and BFQ depth map calculations
to be done at init time, moving it outside of the hotter IO path. This
potentially causes hangs if the users changes the depth of the scheduler
map, by writing to the 'nr_requests' sysfs file for that device.
Add a blk-mq-sched hook that allows blk-mq to inform the scheduler if
the depth changes, so that the scheduler can update its internal state.
Tested-by: Kai Krakow <kai@kaishome.de>
Reported-by: Paolo Valente <paolo.valente@linaro.org>
Fixes: f0635b8a41 ("bfq: calculate shallow depths at init time")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drivers now report to the block layer if they support media change
events. If this is not the case, there's no need to allocate the event
structure, and all event handling code can effectively be skipped. This
simplifies code flow in particular for non-removable sd devices.
This effectively reverts commit 75e3f3ee3c ("block: always allocate
genhd->ev if check_events is implemented").
The sysfs files for the events are kept in place even if no events are
supported, as user space may rely on them being present. The only
difference is that an error code is now returned if the user tries to
set poll_msecs.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, an empty disk->events field tells the block layer not to
forward media change events to user space. This was done in commit
7c88a168da ("block: don't propagate unlisted DISK_EVENTs to userland")
in order to avoid events from "fringe" drivers to be forwarded to user
space. By doing so, the block layer lost the information which events
were supported by a particular block device, and most importantly,
whether or not a given device supports media change events at all.
Prepare for not interpreting the "events" field this way in the future
any more. This is done by adding an additional field "event_flags" to
struct gendisk, and two flag bits that can be set to have the device
treated like one that had the "events" field set to a non-zero value
before. This applies only to the sd and sr drivers, which are changed to
set the new flags.
The new flags are DISK_EVENT_FLAG_POLL to enforce polling of the device
for synchronous events, and DISK_EVENT_FLAG_UEVENT to tell the
blocklayer to generate udev events from kernel events.
In order to add the event_flags field to struct gendisk, the events
field is converted to an "unsigned short"; it doesn't need to hold
values bigger than 2 anyway.
This patch doesn't change behavior.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The async_events field, intended to be used for drivers that support
asynchronous notifications about disk events (aka media change events),
isn't currently used by any driver, and apparently that has been that
way for a long time (if not forever). Remove it.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently have to call nth_page when iterating over pages inside a
bio_vec. Jens complained a while ago that this is fairly expensive.
To mitigate this we can check that that the actual page structures
are contiguous when adding them to the bio, and just do check pointer
arithmetics later on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of needing a special macro to iterate over all pages in
a bvec just do a second passs over the whole bio. This also matches
what we do on the release side. The release side helper is moved
up to where we need the get helper to clearly express the symmetry.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No caller uses bio_iov_iter_get_pages multiple times on a given bio,
and that funtionality isn't all that useful. Removing it will make
some future changes a little easier and also simplifies the function
a bit.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Return early on error, and add an unlikely annotation for that case.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The offset in scatterlists is allowed to be larger than the page size,
so don't go to great length to avoid that case and simplify the
arithmetics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When bio_add_pc_page() fails in bio_copy_user_iov() we should free
the page we just allocated otherwise we are leaking it.
Cc: linux-block@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In NVMe's error handler, follows the typical steps of tearing down
hardware for recovering controller:
1) stop blk_mq hw queues
2) stop the real hw queues
3) cancel in-flight requests via
blk_mq_tagset_busy_iter(tags, cancel_request, ...)
cancel_request():
mark the request as abort
blk_mq_complete_request(req);
4) destroy real hw queues
However, there may be race between #3 and #4, because blk_mq_complete_request()
may run q->mq_ops->complete(rq) remotelly and asynchronously, and
->complete(rq) may be run after #4.
This patch introduces blk_mq_complete_request_sync() for fixing the
above race.
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: James Smart <james.smart@broadcom.com>
Cc: linux-nvme@lists.infradead.org
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function bfq_bfqq_expire() invokes the function
__bfq_bfqq_expire(), and the latter may free the in-service bfq-queue.
If this happens, then no other instruction of bfq_bfqq_expire() must
be executed, or a use-after-free will occur.
Basing on the assumption that __bfq_bfqq_expire() invokes
bfq_put_queue() on the in-service bfq-queue exactly once, the queue is
assumed to be freed if its refcounter is equal to one right before
invoking __bfq_bfqq_expire().
But, since commit 9dee8b3b05 ("block, bfq: fix queue removal from
weights tree") this assumption is false. __bfq_bfqq_expire() may also
invoke bfq_weights_tree_remove() and, since commit 9dee8b3b05
("block, bfq: fix queue removal from weights tree"), also
the latter function may invoke bfq_put_queue(). So __bfq_bfqq_expire()
may invoke bfq_put_queue() twice, and this is the actual case where
the in-service queue may happen to be freed.
To address this issue, this commit moves the check on the refcounter
of the queue right around the last bfq_put_queue() that may be invoked
on the queue.
Fixes: 9dee8b3b05 ("block, bfq: fix queue removal from weights tree")
Reported-by: Dmitrii Tcvetkov <demfloro@demfloro.ru>
Reported-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Dmitrii Tcvetkov <demfloro@demfloro.ru>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit f6970f83ef ("block: don't check if adjacent bvecs in one bio can
be mergeable") changes bvec merge by only considering two bvecs from
different bios. However, if the former bio doesn't inlcude any io bvec,
then the following warning may be triggered:
warning: ‘bvec.bv_offset’ may be used uninitialized in this function [-Wmaybe-uninitialized]
In practice, it shouldn't be triggered.
Fixes it by adding check on former bio, the check shouldn't add any cost
given 'bio->bi_iter' can be hit in cache.
Reported-by: Jens Axboe <axboe@kernel.dk>
Fixes: f6970f83ef ("block: don't check if adjacent bvecs in one bio can be mergeable")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some of the comments in the bfq files had typos. This patch fixes them.
Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The 'def' local variable became unused after commit f382fb0bce ("block: remove
legacy IO schedulers"), let's remove it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hisao Tanabe <xtanabe@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As the function is responsible for executing the individual steps supplied
in the steps argument, execute_steps is a more descriptive name than the
rather generic next.
Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz>
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Originally each of the opal functions that call next include
opal_discovery0 in the array of steps. This is superfluous and
can be done always inside next.
Acked-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The steps argument is only read by the next function, so it can
be passed directly as an argument rather than via opal_dev.
Normally, the steps is an array on the stack, so the pointer stops
being valid then the function that set opal_dev.steps returns.
If opal_dev.steps was not set to NULL before return it would become
a dangling pointer. When the steps are passed as argument this
becomes easier to see and more difficult to misuse.
Acked-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace integer literals by Opal tokens defined in opal_proto.h where
possible.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig