Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ivpQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymkdQCeOS6N613eggYrXwnbjJhxMQDtKAcAmweK6kXh
3o1IKOYqIMOx5E7zxn6W
=7ajf
-----END PGP SIGNATURE-----
Merge tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues"
* tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits)
usb: dwc3: xilinx: Remove unused of_gpio,h
usb: typec: pd: Add higher capability sysfs for sink PDO
usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO
usb: dwc3: pci: add support for the Intel Meteor Lake-M
usb: gadget: u_ether: Don't warn in gether_setup_name_default()
usb: gadget: u_ether: Convert prints to device prints
usb: gadget: u_serial: Add null pointer check in gserial_resume
usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
xhci: host: potential NULL dereference in xhci_generic_plat_probe()
dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional
usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
of: device: Do not ignore error code in of_device_uevent_modalias
of: device: Ignore modalias of reused nodes
usb: gadget: configfs: Fix set but not used variable warning
usb: gadget: uvc: Use custom strings if available
usb: gadget: uvc: Allow linking function to string descs
usb: gadget: uvc: Pick up custom string descriptor IDs
usb: gadget: uvc: Allow linking XUs to string descriptors
usb: gadget: configfs: Attach arbitrary strings to cdev
usb: gadget: configfs: Support arbitrary string descriptors
...
The existing docbook comments for the functions related to creating
a devicetree node do not explain the reference count of a newly
created node, how decrementing the reference count to zero will
free the associated memory, and the caller's responsibility to
call of_node_put() on the node. Explain what happens when the
reference count is decremented to zero.
Signed-off-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20230213185702.395776-8-frowand.list@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add an additional consistency check to of_node_release(), which is
called when the reference count of a devicetree node is decremented
to zero. The node's children should have been deleted before the
node is deleted so check that no children exist.
Signed-off-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20230213185702.395776-7-frowand.list@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
of_node_release() can not use the "%pOF" printk format to report
the node name of a node when the node reference count is zero.
This is because the formatter device_node_string() calls
fwnode_full_name_string() which indirectly calls of_node_get().
Calling of_node_get() on the node with a zero reference count
results in a WARNING and stack trace.
When the reference count has been decremented to zero, this function
is in the subsequent call path which frees memory related to the node.
This commit resolves the unittest EXPECT errors that were created in
the previous commmit.
Signed-off-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20230213185702.395776-6-frowand.list@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add tests to exercise the actions that occur when the reference count
of devicetree nodes decrement to zero and beyond. Decrementing to
zero triggers freeing memory allocated for the node.
This commit will expose a pr_err() issue in of_node_release(), resulting
in some kernal warnings and stack traces.
When scripts/dtc/of_unittest_expect processes the console messages,
it will also report related problems for EXPECT messages due to the
pr_err() issue:
** missing EXPECT begin : 5
Signed-off-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20230213185702.395776-5-frowand.list@gmail.com
[robh: Fix !CONFIG_OF_DYNAMIC build]
Signed-off-by: Rob Herring <robh@kernel.org>
Add more information about the impact the of unittests have on the
live devicetree and why the tests should only be enabled for developer
kernels.
Add information about processing the test output such that the
results are more complete and comprehendable.
Signed-off-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20230213185702.395776-4-frowand.list@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Use of_property_present() instead of of_get_property/of_find_property()
in places where we just need to test presence of a property.
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Tested-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/all/20230215215547.691573-2-robh@kernel.org/
Signed-off-by: Rob Herring <robh@kernel.org>
The printed reserved memory information uses the non-standard "K"
prefix, while all other printed values use proper binary prefixes.
Fix this by using "Ki" instead.
While at it, drop the superfluous spaces inside the parentheses, to
reduce printed line length.
Fixes: aeb9267eb6 ("of: reserved-mem: print out reserved-mem details during boot")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230216083725.1244817-1-geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
It's important to know reserved-mem information in mobile world
since reserved memory via device tree keeps increased in platform
(e.g., 45% in our platform). Therefore, it's crucial to know the
reserved memory sizes breakdown for the memory accounting.
This patch prints out reserved memory details during boot to make
them visible.
Below is an example output:
[ 0.000000] OF: reserved mem: 0x00000009f9400000..0x00000009fb3fffff ( 32768 KB ) map reusable test1
[ 0.000000] OF: reserved mem: 0x00000000ffdf0000..0x00000000ffffffff ( 2112 KB ) map non-reusable test2
[ 0.000000] OF: reserved mem: 0x0000000091000000..0x00000000912fffff ( 3072 KB ) nomap non-reusable test3
Signed-off-by: Martin Liu <liumartin@google.com>
Link: https://lore.kernel.org/r/20230209160954.1471909-1-liumartin@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY+qxtQAKCRDdBJ7gKXxA
jmvNAP4vwrZJ/eXlp/JC35r84fT6ykMQLbv+oT6rG7lx8aH2JgEA5QSYTBvcb4VF
n6tf6OpZbCHtvTPy4/+aVj7hW0XUnAY=
=C92n
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-02-13-13-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Twelve hotfixes, mostly against mm/.
Five of these fixes are cc:stable"
* tag 'mm-hotfixes-stable-2023-02-13-13-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
of: reserved_mem: Have kmemleak ignore dynamically allocated reserved mem
scripts/gdb: fix 'lx-current' for x86
lib: parser: optimize match_NUMBER apis to use local array
mm: shrinkers: fix deadlock in shrinker debugfs
mm: hwpoison: support recovery from ksm_might_need_to_copy()
kasan: fix Oops due to missing calls to kasan_arch_is_ready()
revert "squashfs: harden sanity check in squashfs_read_xattr_id_table"
fsdax: dax_unshare_iter() should return a valid length
mm/gup: add folio to list when folio_isolate_lru() succeed
aio: fix mremap after fork null-deref
mailmap: add entry for Alexander Mikhalitsyn
mm: extend max struct page size for kmsan
Patch series "Fix kmemleak crashes when scanning CMA regions", v2.
When trying to boot a device with an ARM64 kernel with the following
config options enabled:
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y
CONFIG_DEBUG_KMEMLEAK=y
a crash is encountered when kmemleak starts to scan the list of gray
or allocated objects that it maintains. Upon closer inspection, it was
observed that these page-faults always occurred when kmemleak attempted
to scan a CMA region.
At the moment, kmemleak is made aware of CMA regions that are specified
through the devicetree to be dynamically allocated within a range of
addresses. However, kmemleak should not need to scan CMA regions or any
reserved memory region, as those regions can be used for DMA transfers
between drivers and peripherals, and thus wouldn't contain anything
useful for kmemleak.
Additionally, since CMA regions are unmapped from the kernel's address
space when they are freed to the buddy allocator at boot when
CONFIG_DEBUG_PAGEALLOC is enabled, kmemleak shouldn't attempt to access
those memory regions, as that will trigger a crash. Thus, kmemleak
should ignore all dynamically allocated reserved memory regions.
This patch (of 1):
Currently, kmemleak ignores dynamically allocated reserved memory regions
that don't have a kernel mapping. However, regions that do retain a
kernel mapping (e.g. CMA regions) do get scanned by kmemleak.
This is not ideal for two reasons:
1 kmemleak works by scanning memory regions for pointers to allocated
objects to determine if those objects have been leaked or not.
However, reserved memory regions can be used between drivers and
peripherals for DMA transfers, and thus, would not contain pointers to
allocated objects, making it unnecessary for kmemleak to scan these
reserved memory regions.
2 When CONFIG_DEBUG_PAGEALLOC is enabled, along with kmemleak, the
CMA reserved memory regions are unmapped from the kernel's address
space when they are freed to buddy at boot. These CMA reserved regions
are still tracked by kmemleak, however, and when kmemleak attempts to
scan them, a crash will happen, as accessing the CMA region will result
in a page-fault, since the regions are unmapped.
Thus, use kmemleak_ignore_phys() for all dynamically allocated reserved
memory regions, instead of those that do not have a kernel mapping
associated with them.
Link: https://lkml.kernel.org/r/20230208232001.2052777-1-isaacmanjarres@google.com
Link: https://lkml.kernel.org/r/20230208232001.2052777-2-isaacmanjarres@google.com
Fixes: a7259df767 ("memblock: make memblock_find_in_range method private")
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Kirill A. Shutemov <kirill.shtuemov@linux.intel.com>
Cc: Nick Kossifidis <mick@ics.forth.gr>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Saravana Kannan <saravanak@google.com>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
of_device_get_modalias might return an error code, propagate that one.
Otherwise the negative, signed integer is propagated to unsigned integer
for the comparison resulting in a huge 'sl' size.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230207110531.1060252-3-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If of_node is reused, do not use that node's modalias. This will hide
the name of the actual device. This is rather prominent in USB glue
drivers creating a platform device for the host controller.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230207110531.1060252-2-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver core now:
- Has the parent device of a supplier pick up the consumers if the
supplier never has a device created for it.
- Ignores a supplier if the supplier has no parent device and will never
be probed by a driver
And already prevents creating a device link with the consumer as a
supplier of a parent.
So, we no longer need to find the "compatible" node of the supplier or
do any other checks in of_link_to_phandle(). We simply need to make sure
that the supplier is available in DT.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4
Link: https://lore.kernel.org/r/20230207014207.1678715-10-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Fix handling of multiple OF framebuffer devices
- Fix booting on Socionext Synquacer with bad 'dma-ranges' entries
- Add DT binding .yamllint to .gitignore
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmPiyF0ACgkQ+vtdtY28
YcNZpA//adsF6J/7vPo9SiRj/Y+EFZ2m2J1mUubMP4UEAGtfG+JnkOmvjTgO3Rar
aYivXNh2pqKqvOEw35XR5donzeygTxr953W4xzGRrPW282tZeWBeeKfz0bikVguv
v7WzTlmYVL1I6P5KCNB2C5f5zZEXdDc7dA3pJmt+IM5sjEuduhqwlrw57Rd0uRdM
OZOjlrLiwA1I9AIo081EmoPHUAcsckgxJzFqdLvh8Vz1JT3n8Rtj1GXuWQvSAueX
p8vu771QeVJSgzEuZfA4g5Nia9T30g2XhxeD5bBtgndGoKdE8j2AzMoghBODJABa
hvKd1DV9jP14c9HV7M/kgFb8JBEmXnKpARiSIyoP/KXLVraJS3HpbOSgbuTgdrp5
lGxLbb44NYGGbPt1Sl25XPInr2b3BMfto/pvve9G9863fcY6SUk5aDuGIx6pNBsl
lufniFQbaFTLdidskQ7bm187L0QEE4wGMY1ZDs77elMaMdtP6THXfim2Scq1UAKt
tKMgYUciL/nps7rHCovmS8iXvysU7qztw6+F1nlOJMrrDld7LgrOZffWAjBnbNDa
z1RZY1O1uyIIMam8VgeBbdMNoiqNv+2MNWH9STpY74DqS3+o2+pXyJitMS6+1U7p
Rhlzbiwei4F1E0rFZqSGcWsgx+yy7HlgsfnEOKGkWjoFmBik26k=
=T25l
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix handling of multiple OF framebuffer devices
- Fix booting on Socionext Synquacer with bad 'dma-ranges' entries
- Add DT binding .yamllint to .gitignore
* tag 'devicetree-fixes-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: interrupt-controller: arm,gic-v3: Fix typo in description of msi-controller property
dt-bindings: Fix .gitignore
of/address: Return an error when no valid dma-ranges are found
of: Make OF framebuffer device names unique
Bindings describe the new '#nvmem-cell-cells' property. Now that the
arguments count property is optional, we just add this property to the
nvmem-cells.
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-12-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes, future bindings for phandles will get additional arguments.
Thus the target node of the phandle will need a new #.*-cells property.
To be backwards compatible, this needs to be optional.
Prepare the DEFINE_SIMPLE_PROPS() to handle the cells name as optional.
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-11-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definition to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230204-kobj_type-of-v1-1-5910c8ecb7a3@weissschuh.net
Signed-off-by: Rob Herring <robh@kernel.org>
Commit 7a8b64d17e ("of/address: use range parser for of_dma_get_range")
converted the parsing of dma-range properties to use code shared with the
PCI range parser. The intent was to introduce no functional changes however
in the case where we fail to translate the first resource instead of
returning -EINVAL the new code we return 0. Restore the previous behaviour
by returning an error if we find no valid ranges, the original code only
handled the first range but subsequently support for parsing all supplied
ranges was added.
This avoids confusing code using the parsed ranges which doesn't expect to
successfully parse ranges but have only a list terminator returned, this
fixes breakage with so far as I can tell all DMA for on SoC devices on the
Socionext Synquacer platform which has a firmware supplied DT. A bisect
identified the original conversion as triggering the issues there.
Fixes: 7a8b64d17e ("of/address: use range parser for of_dma_get_range")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Luca Di Stefano <luca.distefano@linaro.org>
Cc: 993612@bugs.debian.org
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230126-synquacer-boot-v2-1-cb80fd23c4e2@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Since Linux 5.19 this error is observed:
sysfs: cannot create duplicate filename '/devices/platform/of-display'
This is because multiple devices with the same name 'of-display' are
created on the same bus. Update the code to create numbered device names
for the displays.
Also, fix a node refcounting issue when exiting the boot display loop.
cc: linuxppc-dev@lists.ozlabs.org
References: https://bugzilla.kernel.org/show_bug.cgi?id=216095
Fixes: 52b1b46c39 ("of: Create platform devices for OF framebuffers")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Link: https://lore.kernel.org/r/20230201162247.3575506-1-robh@kernel.org
[robh: Rework to avoid node refcount leaks]
Signed-off-by: Rob Herring <robh@kernel.org>
This reverts commit 972fa3a7c1.
Kmemleak operates by periodically scanning memory regions for pointers to
allocated memory blocks to determine if they are leaked or not. However,
reserved memory regions can be used for DMA transactions between a device
and a CPU, and thus, wouldn't contain pointers to allocated memory blocks,
making them inappropriate for kmemleak to scan. Thus, revert this commit.
Link: https://lkml.kernel.org/r/20230124230254.295589-1-isaacmanjarres@google.com
Fixes: 972fa3a7c1 ("mm: kmemleak: alloc gray object for reserved region with direct map")
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Calvin Zhang <calvinzhang.cool@gmail.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: <stable@vger.kernel.org> [5.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
of_device_uevent_modalias() does not modify the device pointer passed to
it, so mark it constant. In order to properly do this, a number of
busses need to have a modalias function added as they were attempting to
just point to of_device_uevent_modalias instead of their bus-specific
modalias function. This is fine except if the prototype for a bus and
device type modalias function diverges and then problems could happen. To
prevent all of that, just wrap the call to of_device_uevent_modalias()
directly for each bus and device type individually.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Liang He <windhl@126.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Corentin Labbe <clabbe@baylibre.com>
Cc: Zou Wei <zou_wei@huawei.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: dri-devel@lists.freedesktop.org
Cc: devicetree@vger.kernel.org
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function is similar to of_translate_dma_address() but also reads a
length in addition to an address from a device tree property.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230120174251.4004100-2-thierry.reding@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After calling of_irq_parse_one(), the node provided in the of_phandle_args
has a refcount increment by one. Add missing of_node_put in of_irq_get()
to decrement the refcount once used.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/r/20230117144929.423089-1-clement.leger@bootlin.com
Signed-off-by: Rob Herring <robh@kernel.org>
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL terminated strings.
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Link: https://lore.kernel.org/r/202212231039128402297@zte.com.cn
Signed-off-by: Rob Herring <robh@kernel.org>
I do not read a strict requirement on /chosen node in either ePAPR or in
Documentation/devicetree. Help text for CONFIG_CMDLINE and
CONFIG_CMDLINE_EXTEND doesn't make their behavior explicitly dependent on
the presence of /chosen or the presense of /chosen/bootargs.
However the early check for /chosen and bailing out in
early_init_dt_scan_chosen() skips CONFIG_CMDLINE handling which is not
really related to /chosen node or the particular method of passing cmdline
from bootloader.
This leads to counterintuitive combinations (assuming
CONFIG_CMDLINE_EXTEND=y):
a) bootargs="foo", CONFIG_CMDLINE="bar" => cmdline=="foo bar"
b) /chosen missing, CONFIG_CMDLINE="bar" => cmdline==""
c) bootargs="", CONFIG_CMDLINE="bar" => cmdline==" bar"
Rework early_init_dt_scan_chosen() so that the cmdline config options are
always handled.
[commit msg written by Alexander Sverdlin]
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Tested-by: Geoff Levand <geoff@infradead.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20230103-dt-cmdline-fix-v1-2-7038e88b18b6@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
This reverts commit a7d550f82b.
Some arches (PPC at least) don't call early_init_dt_scan_nodes(), so
moving the cmdline processing there breaks them.
Reported-by: Geoff Levand <geoff@infradead.org>
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Tested-by: Geoff Levand <geoff@infradead.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20230103-dt-cmdline-fix-v1-1-7038e88b18b6@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
If memory has been found early_init_dt_scan_memory now returns 1. If
it hasn't found any memory it will return 0, allowing other memory
setup mechanisms to carry on.
Previously early_init_dt_scan_memory always returned 0 without
distinguishing between any kind of memory setup being done or not. Any
code path after the early_init_dt_scan memory call in the ramips
plat_mem_setup code wouldn't be executed anymore. Making
early_init_dt_scan_memory the only way to initialize the memory.
Some boards, including my mt7621 based Cudy X6 board, depend on memory
initialization being done via the soc_info.mem_detect function
pointer. Those wouldn't be able to obtain memory and panic the kernel
during early bootup with the message "early_init_dt_alloc_memory_arch:
Failed to allocate 12416 bytes align=0x40".
Fixes: 1f012283e9 ("of/fdt: Rework early_init_dt_scan_memory() to call directly")
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Rammhold <andreas@rammhold.de>
Link: https://lore.kernel.org/r/20221223112748.2935235-1-andreas@rammhold.de
Signed-off-by: Rob Herring <robh@kernel.org>
- Treewide dropping of redundant 'binding' or 'schema' from schema
titles. This will be followed up with a automated check to catch
these.
- Re-sort vendor-prefies
- Convert GPIO based watchdog to schema
- Handle all the variations for clocks, resets, power domains in i.MX
PCIe binding
- Document missing 'power-domains' property in mxsfb
- Fix error with path references in Tegra XUSB example
- Honor CONFIG_CMDLINE* even without /chosen node
-----BEGIN PGP SIGNATURE-----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=ZGp/
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"This is mostly a treewide clean-up from Krzysztof. There's also a
couple of fixes and things that fell thru the cracks.
I must say this has been a nice merge window without bindings dumped
in at the last minute introducing warnings.
Summary:
- Treewide dropping of redundant 'binding' or 'schema' from schema
titles. This will be followed up with a automated check to catch
these.
- Re-sort vendor-prefies
- Convert GPIO based watchdog to schema
- Handle all the variations for clocks, resets, power domains in i.MX
PCIe binding
- Document missing 'power-domains' property in mxsfb
- Fix error with path references in Tegra XUSB example
- Honor CONFIG_CMDLINE* even without /chosen node"
* tag 'devicetree-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: drop redundant part of title (manual)
dt-bindings: clock: drop redundant part of title
dt-bindings: drop redundant part of title (beginning)
dt-bindings: drop redundant part of title (end, part three)
dt-bindings: drop redundant part of title (end, part two)
dt-bindings: drop redundant part of title (end)
dt-bindings: clock: st,stm32mp1-rcc: add proper title
dt-bindings: memory-controllers: ti,gpmc-child: drop redundant part of title
dt-bindings: drop redundant part of title of shared bindings
dt-bindings: watchdog: gpio: Convert bindings to YAML
dt-bindings: imx6q-pcie: Handle more resets on legacy platforms
dt-bindings: imx6q-pcie: Handle various PD configurations
dt-bindings: imx6q-pcie: Handle various clock configurations
dt-bindings: hwmon: ntc-thermistor: drop Naveen Krishna Chatradhi from maintainers
dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property
dt-bindings: vendor-prefixes: sort entries alphabetically
dt-bindings: usb: tegra-xusb: Remove path references
of: fdt: Honor CONFIG_CMDLINE* even without /chosen node
New support:
- Qualcomm SDM670, SM6115 and SM6375 GPI controller support
- Ingenic JZ4755 dmaengine support
- Removal of iop-adma driver
Updates:
- Tegra support for dma-channel-mask
- at_hdmac cleanup and virt-chan support for this driver
-----BEGIN PGP SIGNATURE-----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=pURR
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- Qualcomm SDM670, SM6115 and SM6375 GPI controller support
- Ingenic JZ4755 dmaengine support
- Removal of iop-adma driver
Updates:
- Tegra support for dma-channel-mask
- at_hdmac cleanup and virt-chan support for this driver"
* tag 'dmaengine-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (46 commits)
dmaengine: Revert "dmaengine: remove s3c24xx driver"
dmaengine: tegra: Add support for dma-channel-mask
dt-bindings: dmaengine: Add dma-channel-mask to Tegra GPCDMA
dmaengine: idxd: Remove linux/msi.h include
dt-bindings: dmaengine: qcom: gpi: add compatible for SM6375
dmaengine: idxd: Fix crc_val field for completion record
dmaengine: at_hdmac: Convert driver to use virt-dma
dmaengine: at_hdmac: Remove unused member of at_dma_chan
dmaengine: at_hdmac: Rename "chan_common" to "dma_chan"
dmaengine: at_hdmac: Rename "dma_common" to "dma_device"
dmaengine: at_hdmac: Use bitfield access macros
dmaengine: at_hdmac: Keep register definitions and structures private to at_hdmac.c
dmaengine: at_hdmac: Set include entries in alphabetic order
dmaengine: at_hdmac: Use pm_ptr()
dmaengine: at_hdmac: Use devm_clk_get()
dmaengine: at_hdmac: Use devm_platform_ioremap_resource
dmaengine: at_hdmac: Use devm_kzalloc() and struct_size()
dmaengine: at_hdmac: Introduce atc_get_llis_residue()
dmaengine: at_hdmac: s/atc_get_bytes_left/atc_get_residue
dmaengine: at_hdmac: Pass residue by address to avoid unnecessary implicit casts
...
I do not read a strict requirement on /chosen node in either ePAPR or in
Documentation/devicetree. Help text for CONFIG_CMDLINE and
CONFIG_CMDLINE_EXTEND doesn't make their behavior explicitly dependent on
the presence of /chosen or the presense of /chosen/bootargs.
However the early check for /chosen and bailing out in
early_init_dt_scan_chosen() skips CONFIG_CMDLINE handling which is not
really related to /chosen node or the particular method of passing cmdline
from bootloader.
This leads to counterintuitive combinations (assuming
CONFIG_CMDLINE_EXTEND=y):
a) bootargs="foo", CONFIG_CMDLINE="bar" => cmdline=="foo bar"
b) /chosen missing, CONFIG_CMDLINE="bar" => cmdline==""
c) bootargs="", CONFIG_CMDLINE="bar" => cmdline==" bar"
Move CONFIG_CMDLINE handling outside of early_init_dt_scan_chosen() so that
cases b and c above result in the same cmdline.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/11af73e05bad75e4ef49067515e3214f6d944b3d.camel@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass in
a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be used
no matter what the const value is. This prevents every subsystem from
having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject, objects
as being "non-mutable". The changes to the kobject and driver core in
this pull request are the result of that, as there are lots of paths
where kobjects and device pointers are not modified at all, so marking
them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object rules.
All of this has been bike-shedded in quite a lot of detail on lkml with
different names and implementations resulting in the tiny version we
have in here, much better than my original proposal. Lots of subsystem
maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with no
problems, OTHER than some merge issues with other trees that should be
obvious when you hit them (block tree deletes a driver that this tree
modifies, iommufd tree modifies code that this tree also touches). If
there are merge problems with these trees, please let me know.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wz3A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yks0ACeKYUlVgCsER8eYW+x18szFa2QTXgAn2h/VhZe
1Fp53boFaQkGBjl8mGF8
=v+FB
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass
in a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be
used no matter what the const value is. This prevents every subsystem
from having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject,
objects as being "non-mutable". The changes to the kobject and driver
core in this pull request are the result of that, as there are lots of
paths where kobjects and device pointers are not modified at all, so
marking them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object
rules.
All of this has been bike-shedded in quite a lot of detail on lkml
with different names and implementations resulting in the tiny version
we have in here, much better than my original proposal. Lots of
subsystem maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with
no problems"
* tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits)
device property: Fix documentation for fwnode_get_next_parent()
firmware_loader: fix up to_fw_sysfs() to preserve const
usb.h: take advantage of container_of_const()
device.h: move kobj_to_dev() to use container_of_const()
container_of: add container_of_const() that preserves const-ness of the pointer
driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion.
driver core: fix up missed scsi/cxlflash class.devnode() conversion.
driver core: fix up some missing class.devnode() conversions.
driver core: make struct class.devnode() take a const *
driver core: make struct class.dev_uevent() take a const *
cacheinfo: Remove of_node_put() for fw_token
device property: Add a blank line in Kconfig of tests
device property: Rename goto label to be more precise
device property: Move PROPERTY_ENTRY_BOOL() a bit down
device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*()
kernfs: fix all kernel-doc warnings and multiple typos
driver core: pass a const * into of_device_uevent()
kobject: kset_uevent_ops: make name() callback take a const *
kobject: kset_uevent_ops: make filter() callback take a const *
kobject: make kobject_namespace take a const *
...
DT Bindings:
- Various LED binding conversions and clean-ups. Convert the ir-spi-led,
pwm-ir-tx, and gpio-ir-tx LED bindings to schemas. Consistently
reference LED common.yaml or multi-led schemas and disallow undefined
properties.
- Convert IDT 89HPESx, pwm-clock, st,stmipid02, Xilinx PCIe hosts,
and fsl,imx-fb bindings to schema
- Add ata-generic, Broadcom u-boot environment, and dynamic MTD
sub-partitions bindings.
- Make all SPI based displays reference spi-peripheral-props.yaml
- Fix some schema property regex's which should be fixed strings or were
missing start/end anchors
- Remove 'status' in examples, again...
DT Core:
- Fix a possible NULL dereference in overlay functions
- Fix kexec reading 32-bit "linux,initrd-{start,end}" values (which
never worked)
- Add of_address_count() helper to count number of 'reg' entries
- Support .dtso extension for DT overlay source files. Rename staging
and unittest overlay files.
- Update dtc to upstream v1.6.1-63-g55778a03df61
-----BEGIN PGP SIGNATURE-----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=y/xu
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Various LED binding conversions and clean-ups. Convert the
ir-spi-led, pwm-ir-tx, and gpio-ir-tx LED bindings to schemas.
Consistently reference LED common.yaml or multi-led schemas and
disallow undefined properties.
- Convert IDT 89HPESx, pwm-clock, st,stmipid02, Xilinx PCIe hosts,
and fsl,imx-fb bindings to schema
- Add ata-generic, Broadcom u-boot environment, and dynamic MTD
sub-partitions bindings.
- Make all SPI based displays reference spi-peripheral-props.yaml
- Fix some schema property regex's which should be fixed strings or
were missing start/end anchors
- Remove 'status' in examples, again...
DT Core:
- Fix a possible NULL dereference in overlay functions
- Fix kexec reading 32-bit "linux,initrd-{start,end}" values (which
never worked)
- Add of_address_count() helper to count number of 'reg' entries
- Support .dtso extension for DT overlay source files. Rename staging
and unittest overlay files.
- Update dtc to upstream v1.6.1-63-g55778a03df61"
* tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (42 commits)
dt-bindings: leds: Add missing references to common LED schema
dt-bindings: leds: intel,lgm: Add missing 'led-gpios' property
of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()
dt-bindings: lcdif: Fix constraints for imx8mp
media: dt-bindings: atmel,isc: Drop unneeded unevaluatedProperties
dt-bindings: Drop Jee Heng Sia
dt-bindings: thermal: cooling-devices: Add missing cache related properties
dt-bindings: leds: irled: ir-spi-led: convert to DT schema
dt-bindings: leds: irled: pwm-ir-tx: convert to DT schema
dt-bindings: leds: irled: gpio-ir-tx: convert to DT schema
dt-bindings: leds: mt6360: rework to match multi-led
dt-bindings: leds: lp55xx: rework to match multi-led
dt-bindings: leds: lp55xx: switch to preferred 'gpios' suffix
dt-bindings: leds: lp55xx: allow label
dt-bindings: leds: use unevaluatedProperties for common.yaml
dt-bindings: thermal: tsens: Add SM6115 compatible
of/kexec: Fix reading 32-bit "linux,initrd-{start,end}" values
dt-bindings: display: Convert fsl,imx-fb.txt to dt-schema
dt-bindings: Add missing start and/or end of line regex anchors
dt-bindings: qcom,pdc: Add missing compatibles
...
The devicetree changes contain exactly 1000 non-merge changesets,
including a number of new arm64 SoC variants from Qualcomm and Apple,
as well as the Renesas r9a07g043f/u chip in both arm64 and riscv variants
While we have occasionally merged support for non-arm SoCs in the past,
this is now the normal path for riscv devicetree files.
The most notable changes, by SoC platform, are:
- The Apple T6000 (M1 Pro), T6001 (M1 Max) and T6002 (M2 Ultra)
chips now have initial support. This is particularly nice as I am
typing this on a T6002 Mac Studio with only a small number of driver
patches.
- Qualcomm MSM8996 Pro (Snapdragon 821), SM6115 (Snapdragon 662), SM4250
(Snapdragon 460), SM6375 (Snapdragon 695), SDM670 (Snapdragon 670),
MSM8976 (Snapdragon 652) and MSM8956 (Snapdragon 650) are all mobile
phone chips that are closely related to others we already support.
Adding those helps support more phones and we add several models
from Sony (Xperia 10 IV, 5 IV, X, and X compact), OnePlus (One, 3,
3T, and Nord N100), Xiaomi (Poco F1, Mi6), Huawei (Watch) and Google
(Pixel 3a). There are also new variants of the Herobrine and Trogdor
chromebook motherboards. SA8540P is an automotive SoC used in the
Qdrive-3 development platform
- Rockchips gains no new SoC variants, but a lot of new boards:
three mobile gaming systems based on RK3326 Odroid-Go/rg351 family,
two more Anbernic gaming systems based on RK3566 and a number of
other RK356x based single-board computers.
- Renesas RZ/G2UL (r9a07g043) was already supported for arm64, but as
the newly added RZ/Five is based on the same design, this now gets
reorganized in order to share most of the dts description between
the two and add the RZ/Five SMARC EVK board support.
Aside from that, there are the usual changes all over the tree:
- New boards on other platforms contain two ASpeed BMC users, two
Broadcom based Wifi routers, Zyxel NSA310S NAS, the i.MX6 based Kobo
Aura2 ebook reader, two i.MX8 based development boards, two Uniphier
Pro5 development boards, the STM32MP1 testbench board from DHCOR,
the TI K3 based BeagleBone AI-64 board, and the Mediatek Helio X10
based Sony Xperia M5 phone.
- The Starfive JH7100 source gets reorganized in order to support the
VisionFive V1 board.
- Minor updates and cleanups for Intel SoCFPGA, Marvell PXA168,
TI, ST, NXP, Apple, Broadcom, Juno, Marvell MVEBU, at91, nuvoton,
Tegra, Mediatek, Renesas, Hisilicon, Allwinner, Samsung, ux500,
spear, ... The treewide cleanups now have a lot of fixes for cache
nodes and other binding violoations.
- Somewhat larger sets of reworks for NVIDIA Tegra, Qualcomm
and Renesas platforms, adding a lot more on-chip device support
- A rework of the way that DTB overlays are built.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmOSFNQACgkQmmx57+YA
GNnAIg/+KAiUHpSI02V2sQyDXout2laM8fxl8pW4qREQLKV7U+fi74vbd297HSsv
yxOrrvD6aU9QUzWvdYEezqZxUEoOAibEAE3qMaJZrCjzdtmQvIeUJQuNhhg/oGFP
ZcSN8E+60qxsYwfXw9OHp5TTLi5X/ejRmJoPkC/DHbxbpu07YKT0aHf9qoeD8ntM
8Y+qRiC9AYMnK49rw/HSsQIOXKC0tUQrfsavnJGKFE2wUAdD1ZFf34VtMu580USo
eVX++hun/AKKhdU/ZV9xZKUCQTU405SwscGdP5OFtkjNqHCHwdcU10Kp/PxR3XNq
t5Zmfg9PO/OfV17K91t60hkgfZsNojP6mvGwGhYSuIEYKbya3o4YrPJZb/8jd2Vr
QclwN94m53zDTEfhdW4sJ1HGFV8FhQGjQ1PNBuUf2YXIztpuhd4PnCc/R31K4Yr8
O0S2tl/PxUPB2ouHzpuB+4QMGYZjK3OmFNIEZ8tucIuwOeagkZmDUPuq6o1Nj0Je
9XDJVAZf0wFztnbnAKdJkF15Fs8wT8wZLIZOnzy4Zp2HhKHkCKQ0EFSyN37WmM6l
fKktQ/U7sULwrEGSz9cBuYjrq7uOsCnRZD2R6MbB0rs16oHIl4OrVSSzoqYQSTlo
JOAimJJo2mLsslzaKr4TrqhUj9zkrYaWgOLPXD3c4MSLRK/Tqnk=
=WCFd
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC DT updates from Arnd Bergmann:
"The devicetree changes contain exactly 1000 non-merge changesets,
including a number of new arm64 SoC variants from Qualcomm and Apple,
as well as the Renesas r9a07g043f/u chip in both arm64 and riscv
variants.
While we have occasionally merged support for non-arm SoCs in the
past, this is now the normal path for riscv devicetree files.
The most notable changes, by SoC platform, are:
- The Apple T6000 (M1 Pro), T6001 (M1 Max) and T6002 (M1 Ultra) chips
now have initial support. This is particularly nice as I am typing
this on a T6002 Mac Studio with only a small number of driver
patches.
- Qualcomm MSM8996 Pro (Snapdragon 821), SM6115 (Snapdragon 662),
SM4250 (Snapdragon 460), SM6375 (Snapdragon 695), SDM670
(Snapdragon 670), MSM8976 (Snapdragon 652) and MSM8956 (Snapdragon
650) are all mobile phone chips that are closely related to others
we already support.
Adding those helps support more phones and we add several models
from Sony (Xperia 10 IV, 5 IV, X, and X compact), OnePlus (One, 3,
3T, and Nord N100), Xiaomi (Poco F1, Mi6), Huawei (Watch) and
Google (Pixel 3a).
There are also new variants of the Herobrine and Trogdor chromebook
motherboards. SA8540P is an automotive SoC used in the Qdrive-3
development platform
- Rockchips gains no new SoC variants, but a lot of new boards: three
mobile gaming systems based on RK3326 Odroid-Go/rg351 family, two
more Anbernic gaming systems based on RK3566 and a number of other
RK356x based single-board computers.
- Renesas RZ/G2UL (r9a07g043) was already supported for arm64, but as
the newly added RZ/Five is based on the same design, this now gets
reorganized in order to share most of the dts description between
the two and add the RZ/Five SMARC EVK board support.
Aside from that, there are the usual changes all over the tree:
- New boards on other platforms contain two ASpeed BMC users, two
Broadcom based Wifi routers, Zyxel NSA310S NAS, the i.MX6 based
Kobo Aura2 ebook reader, two i.MX8 based development boards, two
Uniphier Pro5 development boards, the STM32MP1 testbench board from
DHCOR, the TI K3 based BeagleBone AI-64 board, and the Mediatek
Helio X10 based Sony Xperia M5 phone.
- The Starfive JH7100 source gets reorganized in order to support the
VisionFive V1 board.
- Minor updates and cleanups for Intel SoCFPGA, Marvell PXA168, TI,
ST, NXP, Apple, Broadcom, Juno, Marvell MVEBU, at91, nuvoton,
Tegra, Mediatek, Renesas, Hisilicon, Allwinner, Samsung, ux500,
spear, ... The treewide cleanups now have a lot of fixes for cache
nodes and other binding violoations.
- Somewhat larger sets of reworks for NVIDIA Tegra, Qualcomm and
Renesas platforms, adding a lot more on-chip device support
- A rework of the way that DTB overlays are built"
* tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (979 commits)
arm64: dts: apple: t6002: Fix GPU power domains
arm64: dts: apple: t600x-pmgr: Fix search & replace typo
arm64: dts: apple: Add t8103 L1/L2 cache properties and nodes
arm64: dts: apple: Rename dart-sio* to sio-dart*
arch: arm64: apple: t600x: Use standard "iommu" node name
arch: arm64: apple: t8103: Use standard "iommu" node name
ARM: dts: socfpga: Fix pca9548 i2c-mux node name
dt-bindings: iio: adc: qcom,spmi-vadc: fix PM8350 define
dt-bindings: iio: adc: qcom,spmi-vadc: extend example
arm64: dts: qcom: sc8280xp: fix UFS DMA coherency
arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie
arm64: dts: qcom: sm8250-sony-xperia-edo: fix no-mmc property for SDHCI
arm64: dts: qcom: sdm845-sony-xperia-tama: fix no-mmc property for SDHCI
arm64: dts: qcom: sda660-inforce-ifc6560: fix no-mmc property for SDHCI
arm64: dts: qcom: sa8155p-adp: fix no-mmc property for SDHCI
arm64: dts: qcom: qrb5165-rb: fix no-mmc property for SDHCI
arm64: dts: qcom: sm8450: align MMC node names with dtschema
arm64: dts: qcom: sc7180-trogdor: use generic node names
arm64: dts: qcom: sm8450-hdk: add sound support
arm64: dts: qcom: sm8450: add Soundwire and LPASS
...
When kmalloc() fail to allocate memory in kasprintf(), fn_1 or fn_2 will
be NULL, and strcmp() will cause null pointer dereference.
Fixes: 2fe0e8769d ("of: overlay: check prevents multiple fragments touching same property")
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20221211023337.592266-1-ruanjinjie@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
"linux,initrd-start" and "linux,initrd-end" can be 32-bit values even on
a 64-bit platform. Ideally, the size should be based on
'#address-cells', but that has never been enforced in the kernel's FDT
boot parsing code (early_init_dt_check_for_initrd()). Bootloader
behavior is known to vary. For example, kexec always writes these as
64-bit. The result of incorrectly reading 32-bit values is most likely
the reserved memory for the original initrd will still be reserved
for the new kernel. The original arm64 equivalent of this code failed to
release the initrd reserved memory in *all* cases.
Use of_read_number() to mirror the early_init_dt_check_for_initrd()
code.
Fixes: b30be4dc73 ("of: Add a common kexec FDT setup function")
Cc: stable@vger.kernel.org
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Link: https://lore.kernel.org/r/20221128202440.1411895-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
In struct i2c_driver, field new_probe replaces the soon to be deprecated
field probe. Update unittest for this change. The probe function
doesn't make use of the i2c_device_id * parameter so it can be trivially
converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20221118224540.619276-510-uwe@kleine-koenig.org
[robh: Add Frank's commit msg addition]
Signed-off-by: Rob Herring <robh@kernel.org>
In of_fwnode_get_reference_args(), the refcount of of_args.np has
been incremented in the case of successful return from
of_parse_phandle_with_args() or of_parse_phandle_with_fixed_args().
Decrement the refcount if of_args is not returned to the caller of
of_fwnode_get_reference_args().
Fixes: 3e3119d308 ("device property: Introduce fwnode_property_get_reference_args")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20221121023209.3909759-1-yangyingliang@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
of_device_uevent() does not modify the struct device * passed into it,
so make it a const * to enforce this. Also the documentation for the
function was really wrong so fix that up at the same time.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20221121094649.1556002-5-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In drivers/of/unittest-data/:
- Rename .dts overlay source files to use .dtso suffix.
Modify driver/of/unitest.c to use .dtbo.o based symbols instead of .dtb.o
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Tested-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20221024173434.32518-4-afd@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
DT core:
- Fix node refcounting in of_find_last_cache_level()
- Constify device_node in of_device_compatible_match()
- Fix 'dma-ranges' handling in bus controller nodes
- Fix handling of initrd start > end
- Improve error reporting in of_irq_init()
- Taint kernel on DT unittest running
- Use strscpy instead of strlcpy
- Add a build target, dt_compatible_check, to check for
compatible strings used in kernel sources against compatible strings
in DT schemas.
- Handle DT_SCHEMA_FILES changes when rebuilding
DT bindings:
- LED bindings for MT6370 PMIC
- Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
and arm,versatile-sysreg to DT schema format
- Add nvmem cells to u-boot,env schema
- Add more LED_COLOR_ID definitions
- Require 'opp-table' uses to be a node
- Various schema fixes to match QEMU 'virt' DT usage
- Tree wide dropping of redundant 'Device Tree Binding' in schema titles
- More (unevaluated|additional)Properties fixes in schema child nodes
- Drop various redundant minItems equal to maxItems
-----BEGIN PGP SIGNATURE-----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=IDIz
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Fix node refcounting in of_find_last_cache_level()
- Constify device_node in of_device_compatible_match()
- Fix 'dma-ranges' handling in bus controller nodes
- Fix handling of initrd start > end
- Improve error reporting in of_irq_init()
- Taint kernel on DT unittest running
- Use strscpy instead of strlcpy
- Add a build target, dt_compatible_check, to check for compatible
strings used in kernel sources against compatible strings in DT
schemas.
- Handle DT_SCHEMA_FILES changes when rebuilding
DT bindings:
- LED bindings for MT6370 PMIC
- Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
and arm,versatile-sysreg to DT schema format
- Add nvmem cells to u-boot,env schema
- Add more LED_COLOR_ID definitions
- Require 'opp-table' uses to be a node
- Various schema fixes to match QEMU 'virt' DT usage
- Tree wide dropping of redundant 'Device Tree Binding' in schema
titles
- More (unevaluated|additional)Properties fixes in schema child nodes
- Drop various redundant minItems equal to maxItems"
* tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits)
of: base: Shift refcount decrement in of_find_last_cache_level()
dt-bindings: leds: Add MediaTek MT6370 flashlight
dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
dt-bindings: mailbox: Convert mtk-gce to DT schema
of: base: make of_device_compatible_match() accept const device node
of: Fix "dma-ranges" handling for bus controllers
of: fdt: Remove unused struct fdt_scan_status
dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node
dt-bindings: timer: Add power-domains for TI timer-dm on K3
dt: Add a check for undocumented compatible strings in kernel
kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs
dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML
dt-bindings: i2c: migrate mt7621 text bindings to YAML
dt-bindings: power: gpcv2: correct patternProperties
dt-bindings: virtio: Convert virtio,pci-iommu to DT schema
dt-bindings: timer: arm,arch_timer: Allow dual compatible string
dt-bindings: arm: cpus: Add kryo240 compatible
dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema
dt-bindings: nvmem: u-boot,env: add basic NVMEM cells
dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema
...
fixes all over the tree. Other subsystems depending on this change
have been asked to pull an immutable topic branch for this.
* new driver for Microchip PCI1xxxx switch
* heavy refactoring of the Mellanox BlueField driver
* we prefer async probe in the i801 driver now
* the rest is usual driver updates (support for more SoCs, some
refactoring, some feature additions)
-----BEGIN PGP SIGNATURE-----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=arni
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- 'remove' callback converted to return void. Big change with trivial
fixes all over the tree. Other subsystems depending on this change
have been asked to pull an immutable topic branch for this.
- new driver for Microchip PCI1xxxx switch
- heavy refactoring of the Mellanox BlueField driver
- we prefer async probe in the i801 driver now
- the rest is usual driver updates (support for more SoCs, some
refactoring, some feature additions)
* tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits)
i2c: pci1xxxx: prevent signed integer overflow
i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
i2c: i801: Prefer async probe
i2c: designware-pci: Use standard pattern for memory allocation
i2c: designware-pci: Group AMD NAVI quirk parts together
i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch
docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED
i2c: mlxbf: remove device tree support
i2c: mlxbf: support BlueField-3 SoC
i2c: cadence: Add standard bus recovery support
i2c: mlxbf: add multi slave functionality
i2c: mlxbf: support lock mechanism
macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change
i2c: riic: Use devm_platform_ioremap_resource()
i2c: mlxbf: remove IRQF_ONESHOT
dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c
dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support
i2c: tegra: Add GPCDMA support
i2c: scmi: Convert to be a platform driver
i2c: rk3x: Add rv1126 support
...
Currently, of_find_next_cache_node() and of_property_read_u32()
are called on objects after their refcount have been decremented.
Re-order the calls to decrement the refcount after the function
calls.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20220930144936.2882481-1-pierre.gondois@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
of_device_is_compatible() accepts const device node pointer, there is
no reason why of_device_compatible_match() can't do the same.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/YzY5MaU5N4A2st5R@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
Commit 951d48855d ("of: Make of_dma_get_range() work on bus nodes")
relaxed the handling of "dma-ranges" for any leaf node on the assumption
that it would still represent a usage error for the property to be
present on a non-bus leaf node. However there turns out to be a fiddly
case where a bus also represents a DMA-capable device in its own right,
such as a PCIe root complex with an integrated DMA engine on its
platform side. In such cases, "dma-ranges" translation is entirely valid
for devices discovered behind the bus, but should not be erroneously
applied to the bus controller device itself which operates in its
parent's address space. Fix this by restoring the previous behaviour for
the specific case where a device is configured via its own OF node,
since it is logical to assume that a device should never represent its
own parent bus.
Reported-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/112e8f3d3e7c054ecf5e12b5ac0aa5596ec00681.1664455433.git.robin.murphy@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
After commit bba04d965d06("of/fdt: remove unused of_scan_flat_dt_by_path"), no
one use struct fdt_scan_status, so remove it.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20220927133739.98493-1-yuancan@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
If the properties 'linux,initrd-start' and 'linux,initrd-end' of
the chosen node populated from the bootloader, eg. U-Boot, are so that
start > end, then the phys_initrd_size calculated from end - start is
negative that subsequently gets converted to a high positive value for
being unsigned long long. Then, the memory region with the (invalid)
size is added to the bootmem and attempted being paged in paging_init()
that results in the kernel fault.
For example, on the FVP ARM64 system I'm running, the U-Boot populates
the 'linux,initrd-start' with 8800_0000 and 'linux,initrd-end' with 0.
The phys_initrd_size calculated is then ffff_ffff_7800_0000
(= 0 - 8800_0000 = -8800_0000 + ULLONG_MAX + 1). paging_init() then
attempts to map the address 8800_0000 + ffff_ffff_7800_0000 and oops'es
as below.
It should be stressed, it is generally a fault of the bootloader's with
the kernel relying on it, however we should not allow the bootloader's
misconfiguration to lead to the kernel oops. Not only the kernel should be
bullet proof against it but also finding the root cause of the paging
fault spanning over the bootloader, DT, and kernel may happen is not so
easy.
Unable to handle kernel paging request at virtual address fffffffefe43c000
Mem abort info:
ESR = 0x96000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000007
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000080e3d000
[fffffffefe43c000] pgd=0000000080de9003, pud=0000000080de9003
Unable to handle kernel paging request at virtual address ffffff8000de9f90
Mem abort info:
ESR = 0x96000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000005
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000080e3d000
[ffffff8000de9f90] pgd=0000000000000000, pud=0000000000000000
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.51-yocto-standard #1
Hardware name: FVP Base (DT)
pstate: 60000085 (nZCv daIf -PAN -UAO)
pc : show_pte+0x12c/0x1b4
lr : show_pte+0x100/0x1b4
sp : ffffffc010ce3b30
x29: ffffffc010ce3b30 x28: ffffffc010ceed80
x27: fffffffefe43c000 x26: fffffffefe43a028
x25: 0000000080bf0000 x24: 0000000000000025
x23: ffffffc010b8d000 x22: ffffffc010e3d000
x23: ffffffc010b8d000 x22: ffffffc010e3d000
x21: 0000000080de9000 x20: ffffff7f80000f90
x19: fffffffefe43c000 x18: 0000000000000030
x17: 0000000000001400 x16: 0000000000001c00
x15: ffffffc010cef1b8 x14: ffffffffffffffff
x13: ffffffc010df1f40 x12: ffffffc010df1b70
x11: ffffffc010ce3b30 x10: ffffffc010ce3b30
x9 : 00000000ffffffc8 x8 : 0000000000000000
x7 : 000000000000000f x6 : ffffffc010df16e8
x5 : 0000000000000000 x4 : 0000000000000000
x3 : 00000000ffffffff x2 : 0000000000000000
x1 : 0000008080000000 x0 : ffffffc010af1d68
Call trace:
show_pte+0x12c/0x1b4
die_kernel_fault+0x54/0x78
__do_kernel_fault+0x11c/0x128
do_translation_fault+0x58/0xac
do_mem_abort+0x50/0xb0
el1_da+0x1c/0x90
__create_pgd_mapping+0x348/0x598
paging_init+0x3f0/0x70d0
setup_arch+0x2c0/0x5d4
start_kernel+0x94/0x49c
Code: 92748eb5 900052a0 9135a000 cb010294 (f8756a96)
Signed-off-by: Marek Bykowski <marek.bykowski@gmail.com>
Link: https://lore.kernel.org/r/20220909023358.76881-1-marek.bykowski@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
New pr_err(), a copy of preceeding pr_debug(), faciliates debugging.
This change was inspired by a long lasting debugging of the
octeon_irq_init_ciu() which fails completely silently and leaves the
interrupt controller half-way configured which in turn had very non-obvious
effects.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Link: https://lore.kernel.org/r/20220907121629.54330-1-alexander.sverdlin@nokia.com
Signed-off-by: Rob Herring <robh@kernel.org>
Make OF unittest trigger the new TAINT_TEST taint when OF unittest runs.
Due to OF unittest not being intended to run on production systems, and
potentially causing problems (or security issues like leaking kernel
addresses), the kernel's state should not be considered safe for
production use after OF unittest runs.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20220823200152.3465751-1-frowand.list@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Modules such as net/dsa/dsa_core.ko might want to iterate through an
array of compatible strings for things such as validation (or rather,
skipping it for some potentially broken drivers).
of_device_is_compatible() is exported, by of_device_compatible_match()
isn't. Export the latter as well, so we don't have to open-code the
iteration.
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 78c44d910d ("drivers/of: Fix depth when unflattening devicetree")
forgot to fix up the depth check in the loop body in unflatten_dt_nodes()
which makes it possible to overflow the nps[] buffer...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Fixes: 78c44d910d ("drivers/of: Fix depth when unflattening devicetree")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/7c354554-006f-6b31-c195-cdfe4caee392@omp.ru
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
There's still a handful of new features in here, but there are a lot of
fixes/cleanups as well:
* Support for the Zicbom for explicit cache-block management, along with
the necessary bits to make the non-standard cache management ops on
the Allwinner D1 function.
* Support for the Zihintpause extension, which codifies a go-slow
instruction used for cpu_relax().
* Support for the Sstc extension for supervisor-mode timer/counter
management.
* Many device tree fixes and cleanups, including a large set for the
Canaan device trees.
* A handful of fixes and cleanups for the PMU driver.
-----BEGIN PGP SIGNATURE-----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=caji
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
"There's still a handful of new features in here, but there are a lot
of fixes/cleanups as well:
- Support for the Zicbom extension for explicit cache-block
management, along with the necessary bits to make the non-standard
cache management ops on the Allwinner D1 function
- Support for the Zihintpause extension, which codifies a go-slow
instruction used for cpu_relax()
- Support for the Sstc extension for supervisor-mode timer/counter
management
- Many device tree fixes and cleanups, including a large set for the
Canaan device trees
- A handful of fixes and cleanups for the PMU driver"
* tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (43 commits)
dt-bindings: gpio: sifive: add gpio-line-names
wireguard: selftests: set CONFIG_NONPORTABLE on riscv32
RISC-V: KVM: Support sstc extension
RISC-V: Improve SBI definitions
RISC-V: Move counter info definition to sbi header file
RISC-V: Fix SBI PMU calls for RV32
RISC-V: Update user page mapping only once during start
RISC-V: Fix counter restart during overflow for RV32
RISC-V: Prefer sstc extension if available
RISC-V: Enable sstc extension parsing from DT
RISC-V: Add SSTC extension CSR details
riscv:uprobe fix SR_SPIE set/clear handling
dt-bindings: riscv: fix SiFive l2-cache's cache-sets
riscv: ensure cpu_ops_sbi is declared
RISC-V: cpu_ops_spinwait.c should include head.h
RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h>
riscv: dts: starfive: correct number of external interrupts
riscv: dts: sifive unmatched: Add PWM controlled LEDs
riscv/purgatory: Omit use of bin2c
riscv/purgatory: hard-code obj-y in Makefile
...
This series is based on the alternatives changes done in my svpbmt
series and thus also depends on Atish's isa-extension parsing series.
It implements using the cache-management instructions from the Zicbom-
extension to handle cache flush, etc actions on platforms needing them.
SoCs using cpu cores from T-Head like the Allwinne D1 implement a
different set of cache instructions. But while they are different,
instructions they provide the same functionality, so a variant can easly
hook into the existing alternatives mechanism on those.
[Palmer: Some minor fixups, including a RISCV_ISA_ZICBOM dependency on
MMU that's probably not strictly necessary. The Zicbom support will
trip up sparse for users that have new toolchains, I just sent a patch.]
Link: https://lore.kernel.org/all/20220706231536.2041855-1-heiko@sntech.de/
Link: https://lore.kernel.org/linux-sparse/20220811033138.20676-1-palmer@rivosinc.com/T/#u
* palmer/riscv-zicbom:
riscv: implement cache-management errata for T-Head SoCs
riscv: Add support for non-coherent devices using zicbom extension
dt-bindings: riscv: document cbom-block-size
of: also handle dma-noncoherent in of_dma_is_coherent()
Here is the big set of tty and serial driver changes for 6.0-rc1.
It was delayed from last week as I wanted to make sure the last commit
here got some good testing in linux-next and elsewhere as it seemed to
show up only late in testing for some reason.
Nothing major here, just lots of cleanups from Jiri and Ilpo to make the
tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo). Also
included in here is the obligatory n_gsm updates from Daniel Starke and
lots of tiny driver updates and minor fixes and tweaks for other smaller
serial drivers.
Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYvD8qA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylfEQCdGiYLQkWUUarhnlocHo+kSm5vkvsAnicZg7Sl
IQBeAidA3dZEQO0lLlM5
=t7Yh
-----END PGP SIGNATURE-----
Merge tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.0-rc1.
It was delayed from last week as I wanted to make sure the last commit
here got some good testing in linux-next and elsewhere as it seemed to
show up only late in testing for some reason.
Nothing major here, just lots of cleanups from Jiri and Ilpo to make
the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo).
Also included in here is the obligatory n_gsm updates from Daniel
Starke and lots of tiny driver updates and minor fixes and tweaks for
other smaller serial drivers.
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements
tty: amiserial: Fix comment typo
tty: serial: document uart_get_console()
tty: serial: serial_core, reformat kernel-doc for functions
Documentation: serial: link uart_ops properly
Documentation: serial: move GPIO kernel-doc to the functions
Documentation: serial: dedup kernel-doc for uart functions
Documentation: serial: move uart_ops documentation to the struct
dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126
serial: mvebu-uart: uart2 error bits clearing
tty: serial: fsl_lpuart: correct the count of break characters
serial: stm32: make info structs static to avoid sparse warnings
serial: fsl_lpuart: zero out parity bit in CS7 mode
tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
serial: 8250_bcm2835aux: Add missing clk_disable_unprepare()
tty: vt: initialize unicode screen buffer
serial: remove VR41XX serial driver
serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags
serial: 8250_dwlib: remove redundant sanity check for RS485 flags
dt_bindings: rs485: Correct delay values
...
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve latency
and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYuravgAKCRDdBJ7gKXxA
jpqSAQDrXSdII+ht9kSHlaCVYjqRFQz/rRvURQrWQV74f6aeiAD+NHHeDPwZn11/
SPktqEUrF1pxnGQxqLh1kUFUhsVZQgE=
=w/UH
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
Bindings:
- Add spi-peripheral-props.yaml references to various SPI device
bindings
- Convert qcom,pm8916-wdt, ds1307, Qualcomm BAM DMA, is31fl319x,
skyworks,aat1290, Rockchip EMAC, gpio-ir-receiver, ahci-ceva, Arm CCN
PMU, rda,8810pl-intc, sil,sii9022, ps2-gpio, and arm-firmware-suite
bindings to DT schema format
- New bindings for Arm virtual platforms display, Qualcomm IMEM memory
region, Samsung S5PV210 ChipID, EM Microelectronic EM3027 RTC, and
arm,cortex-a78ae
- Add vendor prefixes for asrock, bytedance, hxt, ingrasys, inventec,
quanta, and densitron
- Add missing MSI and IOMMU properties to host-generic-pci
- Remove bindings for removed EFM32 platform
- Remove old chosen.txt binding (replaced by schema)
- Treewide add missing type information for properties
- Treewide fixing of typos and its vs. it's in bindings. Its all good
now.
- Drop unnecessary quoting in power related schemas
- Several LED binding updates which didn't get picked up
- Move various bindings to proper directories
DT core code:
- Convert unittest GPIO related tests to use fwnode
- Check ima-kexec-buffer against memory bounds
- Print reserved-memory allocation/reservation failures as errors
- Cleanup early_init_dt_reserve_memory_arch()
- Simplify of_overlay_fdt_apply() tail
-----BEGIN PGP SIGNATURE-----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=8/kk
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Add spi-peripheral-props.yaml references to various SPI device
bindings
- Convert qcom,pm8916-wdt, ds1307, Qualcomm BAM DMA, is31fl319x,
skyworks,aat1290, Rockchip EMAC, gpio-ir-receiver, ahci-ceva, Arm
CCN PMU, rda,8810pl-intc, sil,sii9022, ps2-gpio, and
arm-firmware-suite bindings to DT schema format
- New bindings for Arm virtual platforms display, Qualcomm IMEM
memory region, Samsung S5PV210 ChipID, EM Microelectronic EM3027
RTC, and arm,cortex-a78ae
- Add vendor prefixes for asrock, bytedance, hxt, ingrasys, inventec,
quanta, and densitron
- Add missing MSI and IOMMU properties to host-generic-pci
- Remove bindings for removed EFM32 platform
- Remove old chosen.txt binding (replaced by schema)
- Treewide add missing type information for properties
- Treewide fixing of typos and its vs. it's in bindings. Its all good
now.
- Drop unnecessary quoting in power related schemas
- Several LED binding updates which didn't get picked up
- Move various bindings to proper directories
DT core code:
- Convert unittest GPIO related tests to use fwnode
- Check ima-kexec-buffer against memory bounds
- Print reserved-memory allocation/reservation failures as errors
- Cleanup early_init_dt_reserve_memory_arch()
- Simplify of_overlay_fdt_apply() tail"
* tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (65 commits)
dt-bindings: mtd: microchip,mchp48l640: use spi-peripheral-props.yaml
dt-bindings: power: supply: drop quotes when not needed
dt-bindings: power: reset: drop quotes when not needed
dt-bindings: power: drop quotes when not needed
dt-bindings: PCI: host-generic-pci: Allow IOMMU and MSI properties
of/fdt: declared return type does not match actual return type
devicetree/bindings: correct possessive "its" typos
dt-bindings: net: convert emac_rockchip.txt to YAML
dt-bindings: eeprom: microchip,93lc46b: move to eeprom directory
dt-bindings: eeprom: at25: use spi-peripheral-props.yaml
dt-bindings: display: use spi-peripheral-props.yaml
dt-bindings: watchdog: qcom,pm8916-wdt: convert to dtschema
dt-bindings: power: reset: qcom,pon: use absolute path to other schema
dt-bindings: iio/dac: adi,ad5766: Add missing type to 'output-range-microvolts'
dt-bindings: power: supply: charger-manager: Add missing type for 'cm-battery-stat'
dt-bindings: panel: raydium,rm67191: Add missing type to 'video-mode'
of/fdt: Clean up early_init_dt_reserve_memory_arch()
dt-bindings: PCI: fsl,imx6q-pcie: Add missing type for 'reset-gpio-active-high'
dt-bindings: rtc: Add EM Microelectronic EM3027 bindings
dt-bindings: rtc: ds1307: Convert to json-schema
...
Here is the set of driver core and kernfs changes for 6.0-rc1.
"biggest" thing in here is some scalability improvements for kernfs for
large systems. Other than that, included in here are:
- arch topology and cache info changes that have been reviewed
and discussed a lot.
- potential error path cleanup fixes
- deferred driver probe cleanups
- firmware loader cleanups and tweaks
- documentation updates
- other small things
All of these have been in the linux-next tree for a while with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYuqCnw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym/JgCcCnaycJY00ZPRQm3LQCyzfJ0HgqoAn2qxGV+K
NKycLeXZSnuvIA87dycE
=/4Jk
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core / kernfs updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.0-rc1.
The "biggest" thing in here is some scalability improvements for
kernfs for large systems. Other than that, included in here are:
- arch topology and cache info changes that have been reviewed and
discussed a lot.
- potential error path cleanup fixes
- deferred driver probe cleanups
- firmware loader cleanups and tweaks
- documentation updates
- other small things
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (63 commits)
docs: embargoed-hardware-issues: fix invalid AMD contact email
firmware_loader: Replace kmap() with kmap_local_page()
sysfs docs: ABI: Fix typo in comment
kobject: fix Kconfig.debug "its" grammar
kernfs: Fix typo 'the the' in comment
docs: driver-api: firmware: add driver firmware guidelines. (v3)
arch_topology: Fix cache attributes detection in the CPU hotplug path
ACPI: PPTT: Leave the table mapped for the runtime usage
cacheinfo: Use atomic allocation for percpu cache attributes
drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist
MAINTAINERS: Change mentions of mpm to olivia
docs: ABI: sysfs-devices-soc: Update Lee Jones' email address
docs: ABI: sysfs-class-pwm: Update Lee Jones' email address
Documentation/process: Add embargoed HW contact for LLVM
Revert "kernfs: Change kernfs_notify_list to llist."
ACPI: Remove the unused find_acpi_cpu_cache_topology()
arch_topology: Warn that topology for nested clusters is not supported
arch_topology: Add support for parsing sockets in /cpu-map
arch_topology: Set cluster identifier in each core/thread from /cpu-map
arch_topology: Limit span of cpu_clustergroup_mask()
...
The commit 649cab56de (“of: properly check for error returned
by fdt_get_name()”) changed the return value type from bool to int,
but forgot to change the return value simultaneously.
populate_node was only called in unflatten_dt_nodes, and returns
with values greater than or equal to 0 were discarded without further
processing. Considering that return 0 usually indicates success,
return 0 instead of return true.
Fixes: 649cab56de (“of: properly check for error returned by fdt_get_name()”)
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220801120506.11461-2-xuqiang36@huawei.com
of_dma_is_coherent() currently expects the architecture to be
non-coherent and some devices being coherent getting marked
as such with the dma-coherent devicetree property.
For PowerPC CONFIG_OF_DMA_DEFAULT_COHERENT was added which currently
makes of_dma_is_coherent() always return true but doesn't handle
the case of the architecture being coherent but some devices not.
So modify the function to also check for dma-noncoherent and
set a suitable default return value. If CONFIG_OF_DMA_DEFAULT_COHERENT
is set the value starts with true and finding dma-noncoherent will
set it to false and without CONFIG_OF_DMA_DEFAULT_COHERENT, the
behaviour is reversed.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220706231536.2041855-2-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
It does not hurt to fill in the changeset id while the mutex is still
held. After doing so, the function tails for the success and failure
cases become identical, so they can be unified.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Tested-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/6a3357a8f7f29704350e3ffae768ee8a462b54d3.1657893306.git.geert+renesas@glider.be
There is no point in doing several preparatory steps in
of_overlay_fdt_apply(), only to see of_overlay_apply() return early
because of a corrupt device tree.
Move the check for a corrupt device tree from of_overlay_apply() to
of_overlay_fdt_apply(), to check for this as early as possible.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Tested-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/c91ce7112eb5167ea46a43d8a980e76b920010ba.1657893306.git.geert+renesas@glider.be
We should use of_node_put() for the reference 'node' returned by
of_parse_phandle() which will increase the refcount.
Fixes: fec9b62509 ("of: Add plumbing for restricted DMA pool")
Co-authored-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220702014449.263772-1-windhl@126.com
On the ->remove() stage the callback uses physical device node instead of one
from GPIO chip and the variable name which is different to one used in
unittest_gpio_probe(). Make these consistent with unittest_gpio_probe().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220708214539.7254-2-andriy.shevchenko@linux.intel.com
The OF node in the GPIO library is deprecated and soon will be removed.
GPIO library now accepts fwnode as a firmware node, so switch the module
to use it instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220708214539.7254-1-andriy.shevchenko@linux.intel.com
On kexec file load, the Integrity Measurement Architecture (IMA)
subsystem may verify the IMA signature of the kernel and initramfs, and
measure it. The command line parameters passed to the kernel in the
kexec call may also be measured by IMA.
A remote attestation service can verify a TPM quote based on the TPM
event log, the IMA measurement list and the TPM PCR data. This can
be achieved only if the IMA measurement log is carried over from the
current kernel to the next kernel across the kexec call.
PowerPC and ARM64 both achieve this using device tree with a
"linux,ima-kexec-buffer" node. x86 platforms generally don't make use of
device tree, so use the setup_data mechanism to pass the IMA buffer to
the new kernel.
Signed-off-by: Jonathan McDowell <noodles@fb.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> # IMA function definitions
Link: https://lore.kernel.org/r/YmKyvlF3my1yWTvK@noodles-fedora-PC23Y6EG
If the earlycon parameter is given twice, the kernel will spit out a
WARN() in register_console() because it was already registered. The
non-dt variant setup_earlycon() already handles that gracefully. The dt
variant of_setup_earlycon() doesn't. Add the check there and add the
-EALREADY handling in early_init_dt_scan_chosen_stdout().
FWIW, this doesn't happen if CONFIG_ACPI_SPCR_TABLE is set. In that case
the registration is delayed until after earlycon parameter(s) are
parsed.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220628120705.200617-1-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the allocation/reservation of reserved-memory fails, it is normally
an error, so print it as an error so that it doesn't get hidden from the
console due to the loglevel. Also make the allocation failure include
the size just like the reservation failure.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220628113540.2790835-1-vincent.whitchurch@axis.com
Commit 71066545b4 ("driver core: Set fw_devlink.strict=1 by default")
enabled iommus and dmas dependency enforcement by default. On some
systems, this caused the console device's probe to get delayed until the
deferred_probe_timeout expires.
We need consoles to work as soon as possible, so mark the console device
node with FWNODE_FLAG_BEST_EFFORT so that fw_delink knows not to delay
the probe of the console device for suppliers without drivers. The
driver can then make the decision on where it can probe without those
suppliers or defer its probe.
Fixes: 71066545b4 ("driver core: Set fw_devlink.strict=1 by default")
Reported-by: Sascha Hauer <sha@pengutronix.de>
Reported-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20220623080344.783549-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Presently ima_get_kexec_buffer() doesn't check if the previous kernel's
ima-kexec-buffer lies outside the addressable memory range. This can result
in a kernel panic if the new kernel is booted with 'mem=X' arg and the
ima-kexec-buffer was allocated beyond that range by the previous kernel.
The panic is usually of the form below:
$ sudo kexec --initrd initrd vmlinux --append='mem=16G'
<snip>
BUG: Unable to handle kernel data access on read at 0xc000c01fff7f0000
Faulting instruction address: 0xc000000000837974
Oops: Kernel access of bad area, sig: 11 [#1]
<snip>
NIP [c000000000837974] ima_restore_measurement_list+0x94/0x6c0
LR [c00000000083b55c] ima_load_kexec_buffer+0xac/0x160
Call Trace:
[c00000000371fa80] [c00000000083b55c] ima_load_kexec_buffer+0xac/0x160
[c00000000371fb00] [c0000000020512c4] ima_init+0x80/0x108
[c00000000371fb70] [c0000000020514dc] init_ima+0x4c/0x120
[c00000000371fbf0] [c000000000012240] do_one_initcall+0x60/0x2c0
[c00000000371fcc0] [c000000002004ad0] kernel_init_freeable+0x344/0x3ec
[c00000000371fda0] [c0000000000128a4] kernel_init+0x34/0x1b0
[c00000000371fe10] [c00000000000ce64] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
f92100b8 f92100c0 90e10090 910100a0 4182050c 282a0017 3bc00000 40810330
7c0802a6 fb610198 7c9b2378 f80101d0 <a1240000> 2c090001 40820614 e9240010
---[ end trace 0000000000000000 ]---
Fix this issue by checking returned PFN range of previous kernel's
ima-kexec-buffer with page_is_ram() to ensure correct memory bounds.
Fixes: 467d278249 ("powerpc: ima: get the kexec buffer passed by the previous kernel")
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Prakhar Srivastava <prsriva@linux.microsoft.com>
Cc: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Ritesh Harjani <ritesh.list@gmail.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220531041446.3334259-1-vaibhav@linux.ibm.com
Bindings:
- Convert smsc,lan91c111, qcom,spi-qup, qcom,msm-uartdm, qcom,i2c-qup,
qcom,gsbi, i2c-mt65xx, TI wkup_m3_ipc (and new props), qcom,smp2p, TI
timer, Mediatek gnss, Mediatek topckgen, Mediatek apmixedsys, Mediatek
infracfg, fsl,ls-extirq, fsl,layerscape-dcfg, QCom PMIC SPMI,
rda,8810pl-timer, Xilinx zynqmp_ipi, uniphier-pcie, and Ilitek
touchscreen controllers
- Convert various Arm Ltd peripheral IP bindings to schemas
- New bindings for Menlo board CPLD, DH electronics board CPLD,
Qualcomm Geni based QUP I2C, Renesas RZ/G2UL OSTM, Broafcom BCM4751
GNSS, MT6360 PMIC, ASIX USB Ethernet controllers, and Microchip/SMSC
LAN95xx USB Ethernet controllers
- Add vendor prefix for Enclustra
- Add various compatible string additions
- Various example fixes and cleanups
- Remove unused hisilicon,hi6220-reset binding
- Treewide fix properties missing type definition
- Drop some empty and unreferenced .txt bindings
- Documentation improvements for writing schemas
DT driver core:
- Drop static IRQ resources for DT platform devices as IRQ setup is
dynamic and drivers have all been converted to use platform_get_irq()
and friends
- Rework memory allocations and frees for overlays
- Continue overlay notifier callbacks on successful calls and add
unittests
- Handle 'interrupts-extended' in early DT IRQ setup
- Fix of_property_read_string() errors to match documentation
- Ignore disabled nodes in FDT API calls
-----BEGIN PGP SIGNATURE-----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=OUL3
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Convert smsc,lan91c111, qcom,spi-qup, qcom,msm-uartdm,
qcom,i2c-qup, qcom,gsbi, i2c-mt65xx, TI wkup_m3_ipc (and new
props), qcom,smp2p, TI timer, Mediatek gnss, Mediatek topckgen,
Mediatek apmixedsys, Mediatek infracfg, fsl,ls-extirq,
fsl,layerscape-dcfg, QCom PMIC SPMI, rda,8810pl-timer, Xilinx
zynqmp_ipi, uniphier-pcie, and Ilitek touchscreen controllers
- Convert various Arm Ltd peripheral IP bindings to schemas
- New bindings for Menlo board CPLD, DH electronics board CPLD,
Qualcomm Geni based QUP I2C, Renesas RZ/G2UL OSTM, Broafcom BCM4751
GNSS, MT6360 PMIC, ASIX USB Ethernet controllers, and
Microchip/SMSC LAN95xx USB Ethernet controllers
- Add vendor prefix for Enclustra
- Add various compatible string additions
- Various example fixes and cleanups
- Remove unused hisilicon,hi6220-reset binding
- Treewide fix properties missing type definition
- Drop some empty and unreferenced .txt bindings
- Documentation improvements for writing schemas
DT driver core:
- Drop static IRQ resources for DT platform devices as IRQ setup is
dynamic and drivers have all been converted to use
platform_get_irq() and friends
- Rework memory allocations and frees for overlays
- Continue overlay notifier callbacks on successful calls and add
unittests
- Handle 'interrupts-extended' in early DT IRQ setup
- Fix of_property_read_string() errors to match documentation
- Ignore disabled nodes in FDT API calls"
* tag 'devicetree-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (86 commits)
of/irq: fix typo in comment
dt-bindings: Fix properties without any type
Revert "dt-bindings: mailbox: qcom-ipcc: add missing properties into example"
dt-bindings: input: touchscreen: ilitek_ts_i2c: Absorb ili2xxx bindings
dt-bindings: timer: samsung,exynos4210-mct: define strict clock order
dt-bindings: timer: samsung,exynos4210-mct: drop unneeded minItems
dt-bindings: timer: cdns,ttc: drop unneeded minItems
dt-bindings: mailbox: zynqmp_ipi: convert to yaml
dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller
dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers
dt-bindings: net: add schema for ASIX USB Ethernet controllers
of/fdt: Ignore disabled memory nodes
dt-bindings: arm: fix typos in compatible
dt-bindings: mfd: Add bindings child nodes for the Mediatek MT6360
dt-bindings: display: convert Arm Komeda to DT schema
dt-bindings: display: convert Arm Mali-DP to DT schema
dt-bindings: display: convert Arm HDLCD to DT schema
dt-bindings: display: convert PL110/PL111 to DT schema
dt-bindings: arm: convert vexpress-config to DT schema
dt-bindings: arm: convert vexpress-sysregs to DT schema
...
- Allow error pointer to be passed to fwnode APIs (Andy Shevchenko).
- Introduce fwnode_for_each_parent_node() (Andy Shevchenko, Douglas
Anderson).
- Advertise fwnode and device property count API calls (Andy
Shevchenko).
- Clean up fwnode_is_ancestor_of() (Andy Shevchenko).
- Convert device_{dma_supported,get_dma_attr} to fwnode (Sakari Ailus).
- Release subnode properties with data nodes (Sakari Ailus).
- Add ->iomap() and ->irq_get() to fwnode operations (Sakari Ailus).
-----BEGIN PGP SIGNATURE-----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=ly4P
-----END PGP SIGNATURE-----
Merge tag 'devprop-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"These mostly extend the device property API and make it easier to use
in some cases.
Specifics:
- Allow error pointer to be passed to fwnode APIs (Andy Shevchenko).
- Introduce fwnode_for_each_parent_node() (Andy Shevchenko, Douglas
Anderson).
- Advertise fwnode and device property count API calls (Andy
Shevchenko).
- Clean up fwnode_is_ancestor_of() (Andy Shevchenko).
- Convert device_{dma_supported,get_dma_attr} to fwnode (Sakari
Ailus).
- Release subnode properties with data nodes (Sakari Ailus).
- Add ->iomap() and ->irq_get() to fwnode operations (Sakari Ailus)"
* tag 'devprop-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: Advertise fwnode and device property count API calls
device property: Fix recent breakage of fwnode_get_next_parent_dev()
device property: Drop 'test' prefix in parameters of fwnode_is_ancestor_of()
device property: Introduce fwnode_for_each_parent_node()
device property: Allow error pointer to be passed to fwnode APIs
ACPI: property: Release subnode properties with data nodes
device property: Add irq_get to fwnode operation
device property: Add iomap to fwnode operations
ACPI: property: Move acpi_fwnode_device_get_match_data() up
device property: Convert device_{dma_supported,get_dma_attr} to fwnode
* Call of_platform_populate() for MTD partitions
* Check devicetree alias for index
* mtdoops:
- Add a timestamp to the mtdoops header.
- Create a header structure for the saved mtdoops.
- Fix the size of the header read buffer.
* mtdblock: Warn if opened on NAND
* Bindings:
- reserved-memory: Support MTD/block device
- jedec,spi-nor: remove unneeded properties
- Extend fixed-partitions binding
- Add Sercomm (Suzhou) Corporation vendor prefix
MTD driver changes:
* st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove()
* phram:
- Allow cached mappings
- Allow probing via reserved-memory
* maps: ixp4xx: Drop driver
* bcm47xxpart: Print correct offset on read error
CFI driver changes:
* Rename chip_ready variables
* Add S29GL064N ID definition
* Use chip_ready() for write on S29GL064N
* Move and rename chip_check/chip_ready/chip_good_for_write
NAND core changes:
* Print offset instead of page number for bad blocks
Raw NAND controller drivers:
* Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe()
* CS553X: simplify the return expression of cs553x_write_ctrl_byte()
* Davinci: Remove redundant unsigned comparison to zero
* Denali: Use managed device resources
* GPMI:
- Add large oob bch setting support
- Rename the variable ecc_chunk_size
- Uninline the gpmi_check_ecc function
- Add strict ecc strength check
- Refactor BCH geometry settings function
* Intel: Fix possible null-ptr-deref in ebu_nand_probe()
* MPC5121: Check before clk_disable_unprepare() not needed
* Mtk:
- MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
- Also parse the default nand-ecc-engine property if available
- Make mtk_ecc.c a separated module
* OMAP ELM:
- Convert the bindings to yaml
- Describe the bindings for AM64 ELM
- Add support for its compatible
* Renesas: Use runtime PM instead of the raw clock API and update the
bindings accordingly
* Rockchip: Check before clk_disable_unprepare() not needed
* TMIO: Check return value after calling platform_get_resource()
Raw NAND chip driver:
* Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00
SPI-NAND chip drivers:
* Gigadevice:
- Add support for:
- GD5FxGM7xExxG
- GD5F{2,4}GQ5xExxG
- GD5F1GQ5RExxG
- GD5FxGQ4xExxG
- Fix Quad IO for GD5F1GQ5UExxG
* XTX: Add support for XT26G0xA
SPI NOR core changes:
* Read back written SR value to make sure the write was done correctly.
* Introduce a common function for Read ID that manufacturer drivers can
use to verify the Octal DTR switch worked correctly.
* Add helpers for read/write any register commands so manufacturer
drivers don't open code it every time.
* Clarify rdsr dummy cycles documentation.
* Add debugfs entry to expose internal flash parameters and state.
SPI NOR manufacturer drivers changes:
* Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A.
* Move spi_nor_write_ear() to Winbond module since only Winbond flashes
use it.
* Rework Micron and Cypress Octal DTR enable methods to improve
readability.
* Use the common Read ID function to verify switch to Octal DTR mode for
Micron and Cypress flashes.
* Skip polling status on volatile register writes for Micron and Cypress
flashes since the operation is instant.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmKHhXEACgkQJWrqGEe9
VoQ4FQgAwTWnv7Eps8ngxlOE1WW1Kx+XUFCYN7mUKmDycgRKWWqF0OUu3pU6T3Si
XoOixajzsPC7AJtXbbGKUkH3UtqapCZ/OVxMJzY1S1zKVgS72ChvPth+rNOA5H6f
wkwCRYBCm51hYAlOQeRoFtwLEpOP17KTZw9Jn/u5RVwbQedQnzPj5sb6PddejjF4
9nlk2auJHzENBEEBG3WLRNgvGep8mNNFarzWB4iWrMcG0w1EgBksbIdshoBmu7vj
nKcDJbyA81DqX+8d56BfAFih8H2yCXZmhUzMK+zqnNkd1NuPnDDnrQYFKmKm2hAg
3bIMIzi+8dl/m0TY6BHPHj8oIYpjYA==
=P95J
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"MTD core changes:
- Call of_platform_populate() for MTD partitions
- Check devicetree alias for index
- mtdoops:
- Add a timestamp to the mtdoops header.
- Create a header structure for the saved mtdoops.
- Fix the size of the header read buffer.
- mtdblock: Warn if opened on NAND
- Bindings:
- reserved-memory: Support MTD/block device
- jedec,spi-nor: remove unneeded properties
- Extend fixed-partitions binding
- Add Sercomm (Suzhou) Corporation vendor prefix
MTD driver changes:
- st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove()
- phram:
- Allow cached mappings
- Allow probing via reserved-memory
- maps: ixp4xx: Drop driver
- bcm47xxpart: Print correct offset on read error
CFI driver changes:
- Rename chip_ready variables
- Add S29GL064N ID definition
- Use chip_ready() for write on S29GL064N
- Move and rename chip_check/chip_ready/chip_good_for_write
NAND core changes:
- Print offset instead of page number for bad blocks
Raw NAND controller drivers:
- Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe()
- CS553X: simplify the return expression of cs553x_write_ctrl_byte()
- Davinci: Remove redundant unsigned comparison to zero
- Denali: Use managed device resources
- GPMI:
- Add large oob bch setting support
- Rename the variable ecc_chunk_size
- Uninline the gpmi_check_ecc function
- Add strict ecc strength check
- Refactor BCH geometry settings function
- Intel: Fix possible null-ptr-deref in ebu_nand_probe()
- MPC5121: Check before clk_disable_unprepare() not needed
- Mtk:
- MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
- Also parse the default nand-ecc-engine property if available
- Make mtk_ecc.c a separated module
- OMAP ELM:
- Convert the bindings to yaml
- Describe the bindings for AM64 ELM
- Add support for its compatible
- Renesas: Use runtime PM instead of the raw clock API and update the
bindings accordingly
- Rockchip: Check before clk_disable_unprepare() not needed
- TMIO: Check return value after calling platform_get_resource()
Raw NAND chip driver:
- Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00
SPI-NAND chip drivers:
- Gigadevice:
- Add support for:
- GD5FxGM7xExxG
- GD5F{2,4}GQ5xExxG
- GD5F1GQ5RExxG
- GD5FxGQ4xExxG
- Fix Quad IO for GD5F1GQ5UExxG
- XTX: Add support for XT26G0xA
SPI NOR core changes:
- Read back written SR value to make sure the write was done
correctly.
- Introduce a common function for Read ID that manufacturer drivers
can use to verify the Octal DTR switch worked correctly.
- Add helpers for read/write any register commands so manufacturer
drivers don't open code it every time.
- Clarify rdsr dummy cycles documentation.
- Add debugfs entry to expose internal flash parameters and state.
SPI NOR manufacturer drivers changes:
- Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A.
- Move spi_nor_write_ear() to Winbond module since only Winbond
flashes use it.
- Rework Micron and Cypress Octal DTR enable methods to improve
readability.
- Use the common Read ID function to verify switch to Octal DTR mode
for Micron and Cypress flashes.
- Skip polling status on volatile register writes for Micron and
Cypress flashes since the operation is instant"
* tag 'mtd/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (68 commits)
mtd: st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove()
dt-bindings: mtd: partitions: Extend fixed-partitions binding
dt-bindings: Add Sercomm (Suzhou) Corporation vendor prefix
mtd: phram: Allow cached mappings
mtd: call of_platform_populate() for MTD partitions
mtd: rawnand: renesas: Use runtime PM instead of the raw clock API
dt-bindings: mtd: renesas: Fix the NAND controller description
mtd: rawnand: mpc5121: Check before clk_disable_unprepare() not needed
mtd: rawnand: rockchip: Check before clk_disable_unprepare() not needed
mtd: nand: MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
mtd: rawnand: cs553x: simplify the return expression of cs553x_write_ctrl_byte()
mtd: rawnand: kioxia: Add support for TH58NVG3S0HBAI4
mtd: spi-nor: debugfs: fix format specifier
mtd: spi-nor: support eon en25qh256a variant
mtd: spi-nor: winbond: add support for W25Q512NW-IM
mtd: spi-nor: expose internal parameters via debugfs
mtd: spi-nor: export spi_nor_hwcaps_pp2cmd()
mtd: spi-nor: move spi_nor_write_ear() to winbond module
mtd: spi-nor: amend the rdsr dummy cycles documentation
mtd: cfi_cmdset_0002: Rename chip_ready variables
...
When we boot a machine using a devicetree, the generic DT code goes
through all nodes with a 'device_type = "memory"' property, and collects
all memory banks mentioned there. However it does not check for the
status property, so any nodes which are explicitly "disabled" will still
be added as a memblock.
This ends up badly for QEMU, when booting with secure firmware on
arm/arm64 machines, because QEMU adds a node describing secure-only
memory:
===================
secram@e000000 {
secure-status = "okay";
status = "disabled";
reg = <0x00 0xe000000 0x00 0x1000000>;
device_type = "memory";
};
===================
The kernel will eventually use that memory block (which is located below
the main DRAM bank), but accesses to that will be answered with an
SError:
===================
[ 0.000000] Internal error: synchronous external abort: 96000050 [#1] PREEMPT SMP
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc6-00014-g10c8acb8b679 #524
[ 0.000000] Hardware name: linux,dummy-virt (DT)
[ 0.000000] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : new_slab+0x190/0x340
[ 0.000000] lr : new_slab+0x184/0x340
[ 0.000000] sp : ffff80000a4b3d10
....
==================
The actual crash location and call stack will be somewhat random, and
depend on the specific allocation of that physical memory range.
As the DT spec[1] explicitly mentions standard properties, add a simple
check to skip over disabled memory nodes, so that we only use memory
that is meant for non-secure code to use.
That fixes booting a QEMU arm64 VM with EL3 enabled ("secure=on"), when
not using UEFI. In this case the QEMU generated DT will be handed on
to the kernel, which will see the secram node.
This issue is reproducible when using TF-A together with U-Boot as
firmware, then booting with the "booti" command.
When using U-Boot as an UEFI provider, the code there [2] explicitly
filters for disabled nodes when generating the UEFI memory map, so we
are safe.
EDK/2 only reads the first bank of the first DT memory node [3] to learn
about memory, so we got lucky there.
[1] https://github.com/devicetree-org/devicetree-specification/blob/main/source/chapter3-devicenodes.rst#memory-node (after the table)
[2] https://source.denx.de/u-boot/u-boot/-/blob/master/lib/fdtdec.c#L1061-1063
[3] https://github.com/tianocore/edk2/blob/master/ArmVirtPkg/PrePi/FdtParser.c
Reported-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220517101410.3493781-1-andre.przywara@arm.com
When "crashkernel=X,high" is used, there may be two crash regions:
high=crashk_res and low=crashk_low_res. But now the syscall
kexec_file_load() only add crashk_res into "linux,usable-memory-range",
this may cause the second kernel to have no available dma memory.
Fix it like kexec-tools does for option -c, add both 'high' and 'low'
regions into the dtb.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/20220506114402.365-6-thunder.leizhen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When reserving crashkernel in high memory, some low memory is reserved
for crash dump kernel devices and never mapped by the first kernel.
This memory range is advertised to crash dump kernel via DT property
under /chosen,
linux,usable-memory-range = <BASE1 SIZE1 [BASE2 SIZE2]>
We reused the DT property linux,usable-memory-range and made the low
memory region as the second range "BASE2 SIZE2", which keeps compatibility
with existing user-space and older kdump kernels.
Crash dump kernel reads this property at boot time and call memblock_add()
to add the low memory region after memblock_cap_memory_range() has been
called.
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Co-developed-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Acked-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/20220506114402.365-5-thunder.leizhen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
New unittests for overlay notifiers reveal a memory leak in
of_overlay_apply() when a notifier returns an error for action
OF_OVERLAY_POST_APPLY. The pr_err() message is:
OF: ERROR: memory leak, expected refcount 1 instead of 3,
of_node_get()/of_node_put() unbalanced - destroy cset entry: attach
overlay node /testcase-data/overlay-node/test-bus/test-unittest17
Change the error path to no longer call free_overlay_changeset(),
and document that the caller of of_overlay_fdt_apply() may choose
to remove the overlay.
Update the unittest that triggered the error to expect the changed
return values and to call of_overlay_remove().
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220502181742.1402826-4-frowand.list@gmail.com
Add tests for overlay apply and remove notifiers. Trigger errors
for each of the notifier actions.
These tests will reveal a memory leak problem when a notifier returns
an error for action OF_OVERLAY_POST_APPLY. The pr_err() message is:
OF: ERROR: memory leak, expected refcount 1 instead of 3,
of_node_get()/of_node_put() unbalanced - destroy cset entry: attach
overlay node /testcase-data/overlay-node/test-bus/test-unittest17
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220502181742.1402826-3-frowand.list@gmail.com
The values of enum of_overlay_notify_action are used to index into
array of_overlay_action_name. Add an entry to of_overlay_action_name
for the value recently added to of_overlay_notify_action.
Array of_overlay_action_name[] is moved into include/linux/of.h
adjacent to enum of_overlay_notify_action to make the connection
between the two more obvious if either is modified in the future.
The only use of of_overlay_action_name is for error reporting in
overlay_notify(). All callers of overlay_notify() report the same
error, but with fewer details. Remove the redundant error reports
in the callers.
Fixes: 067c098766 ("of: overlay: rework overlay apply and remove kfree()s")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220502181742.1402826-2-frowand.list@gmail.com
Fix various kfree() issues related to of_overlay_apply().
- Double kfree() of fdt and tree when init_overlay_changeset()
returns an error.
- free_overlay_changeset() free the root of the unflattened
overlay (variable tree) instead of the memory that contains
the unflattened overlay.
- For the case of a failure during applying an overlay, move kfree()
of new_fdt and overlay_mem into free_overlay_changeset(), which
is called by the function that allocated them.
- For the case of removing an overlay, the kfree() of new_fdt and
overlay_mem remains in free_overlay_changeset().
- Check return value of of_fdt_unflatten_tree() for error instead
of checking the returned value of overlay_root.
- When storing pointers to allocated objects in ovcs, do so as
near to the allocation as possible instead of in deeply layered
function.
More clearly document policy related to lifetime of pointers into
overlay memory.
Double kfree()
Reported-by: Slawomir Stepien <slawomir.stepien@nokia.com>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220420222505.928492-3-frowand.list@gmail.com
Variables change name across function calls when there is not a good
reason to do so. Fix by changing "fdt" to "new_fdt" and "tree" to
"overlay_root".
The name disparity was confusing when creating the following commit.
The name changes are in this separate commit to make review of the
following commmit less complex.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220420222505.928492-2-frowand.list@gmail.com
We should not break overlay notifications on NOTIFY_{OK|STOP}
otherwise we might break on the first fragment. We should only stop
notifications if a *real* errno is returned by one of the listeners.
Fixes: a1d19bd4cf ("of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220420130205.89435-1-nuno.sa@analog.com
Allow phram to be probed from the devicetree. It expects to be in a
reserved-memory node as documented by the bindings. This allows things
like partitioning to be specified via the devicetree.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220412135302.1682890-4-vincent.whitchurch@axis.com
Create a platform device for each OF-declared framebuffer and have
offb bind to these devices. Allows for real hot-unplugging and other
drivers besides offb.
Originally, offb created framebuffer devices while initializing its
module by parsing the OF device tree. No actual Linux device was set
up. This tied OF framebuffers to offb and makes writing other drivers
for the OF framebuffers complicated. The absence of a Linux device
further prevented real hot-unplugging. Adding a distinct platform
device for each OF framebuffer solves both problems. Specifically, a
DRM driver can now provide graphics output for modern userspace.
Some of the offb init code is now located in the OF initialization.
There's now also an implementation of of_platform_default_populate_init(),
which was missing before. The OF side creates different devices for
either OF display nodes or BootX displays as they require different
handling by the driver. The offb drivers picks up each type of device
and runs the appropriate fbdev initialization.
Tested with OF display nodes on qemu's ppc64le target.
v3:
* declare variable 'node' with function scope (Rob)
v2:
* run PPC code as part of existing initialization (Rob)
* add a few more error warnings (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220419100405.12600-2-tzimmermann@suse.de
When the length of the string is zero of_property_read_string should
return -ENODATA according to the description of the function.
However, of_property_read_string doesn't check prop->length. If
prop->length is zero, return -ENODATA.
Without this patch the following command in u-boot:
fdt set /chosen/node property-name
results in of_property_read_string returning -EILSEQ when attempting to
read property-name. With this patch, it returns -ENODATA as expected.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220416003028.1315268-1-sstabellini@kernel.org
The RISC-V PLIC binding uses interrupts-extended to specify its parent
domain(s). That binding does not allow the interrupt-parent property to
appear in the irqchip node. This prevents of_irq_init from properly
detecting the irqchip hierarchy.
If no interrupt-parent property is present in the enclosing bus or root
node, then desc->interrupt_parent will be NULL for both the per-CPU
RISC-V INTC (the actual root domain) and the RISC-V PLIC. Similarly, if
the bus or root node specifies `interrupt-parent = <&plic>`, then
of_irq_init will hit the `desc->interrupt_parent == np` check, and again
all parents will be NULL. So things happen to work today for some boards
due to Makefile ordering.
However, things break when another irqchip ("foo") is stacked on top of
the PLIC. The bus or root node will have `interrupt-parent = <&foo>`,
since that is what all of the other peripherals need. When of_irq_init
runs, it will try to find the PLIC's parent domain. of_irq_find_parent
will fall back to using the interrupt-parent property of the PLIC's
parent node (i.e. the bus or root node), and of_irq_init will see "foo"
as the PLIC's parent domain. But this is wrong, because "foo" is
actually the PLIC's child domain!
So of_irq_init wrongly attempts to init the stacked irqchip before the
PLIC. This fails and breaks booting.
Fix this by using the first node referenced by interrupts-extended as
the parent when that property is present. This allows of_irq_init to see
the relationship between the PLIC and the per-CPU RISC-V INTC, and thus
only the RISC-V INTC is (correctly) considered a root domain.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220412051529.6293-1-samuel@sholland.org
Add irq_get() fwnode operation to implement fwnode_irq_get() through
fwnode operations, moving the code in fwnode_irq_get() to OF and ACPI
frameworks.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add iomap() fwnode operation to implement fwnode_iomap() through fwnode
operations, moving the code in fwnode_iomap() to OF framework.
Note that the IS_ENABLED(CONFIG_OF_ADDRESS) && is_of_node(fwnode) check is
needed for Sparc that has its own implementation of of_iomap anyway. Let
the pre-compiler to handle that check.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make the device_dma_supported and device_get_dma_attr functions to use the
fwnode ops, and move the implementation to ACPI and OF frameworks.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that all the DT drivers have switched to platform_get_irq() we can now
safely drop the static setup of IRQ resource from DT core code.
With the above change hierarchical setup of irq domains is no longer
bypassed and thus allowing hierarchical interrupt domains to describe
interrupts using "interrupts" DT property.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220316200633.28974-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
There will be two merge conflicts with your tree, one in MAINTAINERS
which is obvious to fix up, and one in drivers/phy/freescale/Kconfig
which also should be easy to resolve.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG3fQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykNEgCfaRG8CRxewDXOO4+GSeA3NGK+AIoAnR89donC
R4bgCjfg8BWIBcVVXg3/
=WWXC
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
- Add Krzysztof Kozlowski as co-maintainer for DT bindings providing
much needed help.
- DT schema validation now takes DTB files as input rather than
intermediate YAML files. This decouples the validation from the source
level syntax information. There's a bunch of schema fixes as a result
of switching to DTB based validation which exposed some errors
and incomplete schemas and examples.
- Kbuild improvements to explicitly warn users running 'make
dt_binding_check' on missing yamllint
- Expand DT_SCHEMA_FILES kbuild variable to take just a partial filename
or path instead of the full path to 1 file.
- Convert various bindings to schema format: mscc,vsc7514-switch,
multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS
bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel
SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display
subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma,
msm/mdp4, rda,8810pl-uart
- New schemas for u-boot environment variable partition, TI clksel
- New compatible strings for Renesas RZ/V2L SoC
- Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated HiSilicon
- Add/fix schemas for QEMU Arm 'virt' machine
- Drop unused of_alias_get_alias_list() function
- Add a script to check DT unittest EXPECT message output. Pass messages
also now print by default at PR_INFO level to help test automation.
-----BEGIN PGP SIGNATURE-----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=g1li
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Add Krzysztof Kozlowski as co-maintainer for DT bindings providing
much needed help.
- DT schema validation now takes DTB files as input rather than
intermediate YAML files. This decouples the validation from the
source level syntax information. There's a bunch of schema fixes as a
result of switching to DTB based validation which exposed some errors
and incomplete schemas and examples.
- Kbuild improvements to explicitly warn users running 'make
dt_binding_check' on missing yamllint
- Expand DT_SCHEMA_FILES kbuild variable to take just a partial
filename or path instead of the full path to 1 file.
- Convert various bindings to schema format: mscc,vsc7514-switch,
multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS
bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel
SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display
subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma,
msm/mdp4, rda,8810pl-uart
- New schemas for u-boot environment variable partition, TI clksel
- New compatible strings for Renesas RZ/V2L SoC
- Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated
HiSilicon
- Add/fix schemas for QEMU Arm 'virt' machine
- Drop unused of_alias_get_alias_list() function
- Add a script to check DT unittest EXPECT message output. Pass
messages also now print by default at PR_INFO level to help test
automation.
* tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (96 commits)
dt-bindings: kbuild: Make DT_SCHEMA_LINT a recursive variable
dt-bindings: nvmem: add U-Boot environment variables binding
dt-bindings: ufs: qcom: Add SM6350 compatible string
dt-bindings: dmaengine: sifive,fu540-c000: include generic schema
dt-bindings: gpio: pca95xx: drop useless consumer example
Revert "of: base: Introduce of_alias_get_alias_list() to check alias IDs"
dt-bindings: virtio,mmio: Allow setting devices 'dma-coherent'
dt-bindings: gnss: Add two more chips
dt-bindings: gnss: Rewrite sirfstar binding in YAML
dt-bindings: gnss: Modify u-blox to use common bindings
dt-bindings: gnss: Rewrite common bindings in YAML
dt-bindings: ata: ahci-platform: Add rk3568-dwc-ahci compatible
dt-bindings: ata: ahci-platform: Add power-domains property
dt-bindings: ata: ahci-platform: Convert DT bindings to yaml
dt-bindings: kbuild: Use DTB files for validation
dt-bindings: kbuild: Pass DT_SCHEMA_FILES to dt-validate
dt-bindings: Add QEMU virt machine compatible
dt-bindings: arm: Convert QEMU fw-cfg to DT schema
dt-bindings: i2c: at91: Add SAMA7G5 compatible strings list
dt-bindings: i2c: convert i2c-at91 to json-schema
...
Patch series "mm: enforce pageblock_order < MAX_ORDER".
Having pageblock_order >= MAX_ORDER seems to be able to happen in corner
cases and some parts of the kernel are not prepared for it.
For example, Aneesh has shown [1] that such kernels can be compiled on
ppc64 with 64k base pages by setting FORCE_MAX_ZONEORDER=8, which will
run into a WARN_ON_ONCE(order >= MAX_ORDER) in comapction code right
during boot.
We can get pageblock_order >= MAX_ORDER when the default hugetlb size is
bigger than the maximum allocation granularity of the buddy, in which
case we are no longer talking about huge pages but instead gigantic
pages.
Having pageblock_order >= MAX_ORDER can only make alloc_contig_range()
of such gigantic pages more likely to succeed.
Reliable use of gigantic pages either requires boot time allcoation or
CMA, no need to overcomplicate some places in the kernel to optimize for
corner cases that are broken in other areas of the kernel.
This patch (of 2):
Let's enforce pageblock_order < MAX_ORDER and simplify.
Especially patch #1 can be regarded a cleanup before:
[PATCH v5 0/6] Use pageblock_order for cma and alloc_contig_range
alignment. [2]
[1] https://lkml.kernel.org/r/87r189a2ks.fsf@linux.ibm.com
[2] https://lkml.kernel.org/r/20220211164135.1803616-1-zi.yan@sent.com
Link: https://lkml.kernel.org/r/20220214174132.219303-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: John Garry via iommu <iommu@lists.linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit b1078c355d.
The single user of of_alias_get_alias_list(),
drivers/tty/serial/xilinx_uartps.c, has since been refactored and no
longer needs this function. It also contained a Smatch checker warning:
drivers/of/base.c:2038 of_alias_get_alias_list()
warn: passing negative bit value 's32min-(-2),0-s32max' to 'set_bit()'
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rob Herring <robh@kernel.org>
elfcorehdr_addr is fixed address passed to Second kernel which may be conflicted
with potential reserved memory in Second kernel,so fdt_reserve_elfcorehdr() ahead
of fdt_init_reserved_mem() can relieve this situation.
Signed-off-by: Nikhil Gupta <nikhil.gupta@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220128042321.15228-1-nikhil.gupta@nxp.com
Printing the devicetree unittest pass message for each passed test
creates much console verbosity. The existing pass messages are
printed at loglevel KERN_DEBUG so they will not print by default.
Change default to print the pass messages at loglevel PR_INFO so
they will print with the default console loglevel.
The test community expects either a pass or a fail message for each
test in a test suite. The messages are typically post-processed to
report pass/fail results.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220210230819.3303212-1-frowand.list@gmail.com
Open Profile for DICE is an open protocol for measured boot compatible
with the Trusted Computing Group's Device Identifier Composition
Engine (DICE) specification. The generated Compound Device Identifier
(CDI) certificates represent the hardware/software combination measured
by DICE, and can be used for remote attestation and sealing.
Add a driver that exposes reserved memory regions populated by firmware
with DICE CDIs and exposes them to userspace via a character device.
Userspace obtains the memory region's size from read() and calls mmap()
to create a mapping of the memory region in its address space. The
mapping is not allowed to be write+shared, giving userspace a guarantee
that the data were not overwritten by another process.
Userspace can also call write(), which triggers a wipe of the DICE data
by the driver. Because both the kernel and userspace mappings use
write-combine semantics, all clients observe the memory as zeroed after
the syscall has returned.
Cc: Andrew Scull <ascull@google.com>
Cc: Will Deacon <will@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Brazdil <dbrazdil@google.com>
Link: https://lore.kernel.org/r/20220126231237.529308-3-dbrazdil@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The text of various warning messages triggered by unittest has
changed. Update the text of expected warnings to match.
The expected vs actual warnings are most easily seen by filtering
the boot console messages with the of_unittest_expect program at
https://github.com/frowand/dt_tools.git. The filter prefixes
problem lines with '***', and prefixes lines that match expected
errors with 'ok '. All other lines are prefixed with ' '.
Unrelated lines have been deleted in the following examples.
The mismatch appears as:
-> ### dt-test ### start of unittest - you will see error messages
OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1
** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1
OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1
** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1
OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1
** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1
platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found
** of_unittest_expect WARNING - not found ---> platform testcase-data:testcase-device2: IRQ index 0 not found
-> ### dt-test ### end of unittest - 254 passed, 0 failed
** EXPECT statistics:
**
** EXPECT found : 42
** EXPECT not found : 4
With this commit applied, the mismatch is resolved:
-> ### dt-test ### start of unittest - you will see error messages
ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1
ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1
ok OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1
ok platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found
-> ### dt-test ### end of unittest - 254 passed, 0 failed
** EXPECT statistics:
**
** EXPECT found : 46
** EXPECT not found : 0
Fixes: 2043727c28 ("driver core: platform: Make use of the helper function dev_err_probe()")
Fixes: 94a4950a4a ("of: base: Fix phandle argument length mismatch error message")
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220127192643.2534941-1-frowand.list@gmail.com
- Fix a regression when probing a child device reusing the parent
device's DT node pointer
- Refactor of_parse_phandle*() variants to static inlines
- Drop Enric Balletbo i Serra as a maintainer
- Fix DT schemas with arrays incorrectly encoded as a matrix
- Drop unneeded pinctrl properties from schemas
- Add SPI peripheral schema to SPI based displays
- Clean-up several schema examples
- Clean-up trivial-devices.yaml comments
- Add missing, in use vendor prefixes: Wingtech, Thundercomm, Huawei,
F(x)tec, 8devices
-----BEGIN PGP SIGNATURE-----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=ZOqM
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes and cleanups from Rob Herring:
- Fix a regression when probing a child device reusing the parent
device's DT node pointer
- Refactor of_parse_phandle*() variants to static inlines
- Drop Enric Balletbo i Serra as a maintainer
- Fix DT schemas with arrays incorrectly encoded as a matrix
- Drop unneeded pinctrl properties from schemas
- Add SPI peripheral schema to SPI based displays
- Clean-up several schema examples
- Clean-up trivial-devices.yaml comments
- Add missing, in use vendor prefixes: Wingtech, Thundercomm, Huawei,
F(x)tec, 8devices
* tag 'devicetree-fixes-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: google,cros-ec: drop Enric Balletbo i Serra from maintainers
dt-bindings: display: bridge: drop Enric Balletbo i Serra from maintainers
of: Check 'of_node_reused' flag on of_match_device()
of: property: define of_property_read_u{8,16,32,64}_array() unconditionally
of: base: make small of_parse_phandle() variants static inline
dt-bindings: mfd: cirrus,madera: Fix 'interrupts' in example
dt-bindings: Fix array schemas encoded as matrices
dt-bindings: Drop unnecessary pinctrl properties
dt-bindings: rtc: st,stm32-rtc: Make each example a separate entry
dt-bindings: mmc: arm,pl18x: Make each example a separate entry
dt-bindings: display: Add SPI peripheral schema to SPI based displays
scripts/dtc: dtx_diff: remove broken example from help text
dt-bindings: trivial-devices: fix double spaces in comments
dt-bindings: trivial-devices: fix swapped comments
dt-bindings: vendor-prefixes: add Wingtech
dt-bindings: vendor-prefixes: add Thundercomm
dt-bindings: vendor-prefixes: add Huawei
dt-bindings: vendor-prefixes: add F(x)tec
dt-bindings: vendor-prefixes: add 8devices
dt-bindings: power: reset: gpio-restart: Correct default priority
Commit 0f153a1b81 ("usb: chipidea: Set the DT node on the child
device") caused the child device to match on the parent driver
instead of the child's driver since the child's DT node pointer matched.
The worst case result is a loop of the parent driver probing another
instance and creating yet another child device eventually exhausting the
stack. If the child driver happens to match first, then everything works
fine.
A device sharing the DT node should never do DT based driver matching,
so let's simply check of_node_reused in of_match_device() to prevent
that.
Fixes: 0f153a1b81 ("usb: chipidea: Set the DT node on the child device")
Link: https://lore.kernel.org/all/20220114105620.GK18506@ediswmail.ad.cirrus.com/
Reported-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Chen <peter.chen@nxp.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220118173404.1891800-1-robh@kernel.org
Make all the smaller variants of the of_parse_phandle() static inline.
This also let us remove the empty function stubs if CONFIG_OF is not
defined.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Walle <michael@walle.cc>
[robh: move index < 0 check into __of_parse_phandle_with_args]
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220118173504.2867523-2-michael@walle.cc
Merge misc updates from Andrew Morton:
"146 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak,
dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap,
memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb,
userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp,
ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and
damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits)
mm/damon: hide kernel pointer from tracepoint event
mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log
mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging
mm/damon/dbgfs: remove an unnecessary variable
mm/damon: move the implementation of damon_insert_region to damon.h
mm/damon: add access checking for hugetlb pages
Docs/admin-guide/mm/damon/usage: update for schemes statistics
mm/damon/dbgfs: support all DAMOS stats
Docs/admin-guide/mm/damon/reclaim: document statistics parameters
mm/damon/reclaim: provide reclamation statistics
mm/damon/schemes: account how many times quota limit has exceeded
mm/damon/schemes: account scheme actions that successfully applied
mm/damon: remove a mistakenly added comment for a future feature
Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts
Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning
Docs/admin-guide/mm/damon/usage: remove redundant information
Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks
mm/damon: convert macro functions to static inline functions
mm/damon: modify damon_rand() macro to static inline function
mm/damon: move damon_rand() definition into damon.h
...
Reserved regions with direct mapping may contain references to other
regions. CMA region with fixed location is reserved without creating
kmemleak_object for it.
So add them as gray kmemleak objects.
Link: https://lkml.kernel.org/r/20211123090641.3654006-1-calvinzhang.cool@gmail.com
Signed-off-by: Calvin Zhang <calvinzhang.cool@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bindings:
- DT schema conversions for Samsung clocks, RNG bindings, Qcom Command
DB and rmtfs, gpio-restart, i2c-mux-gpio, i2c-mux-pinctl, Tegra I2C
and BPMP, pwm-vibrator, Arm DSU, and Cadence macb
- DT schema conversions for Broadcom platforms: interrupt controllers,
STB GPIO, STB waketimer, STB reset, iProc MDIO mux, iProc PCIe,
Cygnus PCIe PHY, PWM, USB BDC, BCM6328 LEDs, TMON, SYSTEMPORT, AMAC,
Northstar 2 PCIe PHY, GENET, moca PHY, GISB arbiter, and SATA
- Add binding schemas for Tegra210 EMC table, TI DC-DC converters,
- Clean-ups of MDIO bus schemas to fix 'unevaluatedProperties' issues
- More fixes due to 'unevaluatedProperties' enabling
- Data type fixes and clean-ups of binding examples found in preparation
to move to validating DTB files directly (instead of intermediate YAML
representation.
- Vendor prefixes for T-Head Semiconductor, OnePlus, and Sunplus
- Add various new compatible strings
DT core:
- Silence a warning for overlapping reserved memory regions
- Reimplement unittest overlay tracking
- Fix stack frame size warning in unittest
- Clean-ups of early FDT scanning functions
- Fix handling of "linux,usable-memory-range" on EFI booted systems
- Add support for 'fail' status on CPU nodes
- Improve error message in of_phandle_iterator_next()
- kbuild: Disable duplicate unit-address warnings for disabled nodes
-----BEGIN PGP SIGNATURE-----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=2g8v
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- DT schema conversions for Samsung clocks, RNG bindings, Qcom
Command DB and rmtfs, gpio-restart, i2c-mux-gpio, i2c-mux-pinctl,
Tegra I2C and BPMP, pwm-vibrator, Arm DSU, and Cadence macb
- DT schema conversions for Broadcom platforms: interrupt
controllers, STB GPIO, STB waketimer, STB reset, iProc MDIO mux,
iProc PCIe, Cygnus PCIe PHY, PWM, USB BDC, BCM6328 LEDs, TMON,
SYSTEMPORT, AMAC, Northstar 2 PCIe PHY, GENET, moca PHY, GISB
arbiter, and SATA
- Add binding schemas for Tegra210 EMC table, TI DC-DC converters,
- Clean-ups of MDIO bus schemas to fix 'unevaluatedProperties' issues
- More fixes due to 'unevaluatedProperties' enabling
- Data type fixes and clean-ups of binding examples found in
preparation to move to validating DTB files directly (instead of
intermediate YAML representation.
- Vendor prefixes for T-Head Semiconductor, OnePlus, and Sunplus
- Add various new compatible strings
DT core:
- Silence a warning for overlapping reserved memory regions
- Reimplement unittest overlay tracking
- Fix stack frame size warning in unittest
- Clean-ups of early FDT scanning functions
- Fix handling of "linux,usable-memory-range" on EFI booted systems
- Add support for 'fail' status on CPU nodes
- Improve error message in of_phandle_iterator_next()
- kbuild: Disable duplicate unit-address warnings for disabled nodes"
* tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (114 commits)
dt-bindings: net: mdio: Drop resets/reset-names child properties
dt-bindings: clock: samsung: convert S5Pv210 to dtschema
dt-bindings: clock: samsung: convert Exynos5410 to dtschema
dt-bindings: clock: samsung: convert Exynos5260 to dtschema
dt-bindings: clock: samsung: extend Exynos7 bindings with UFS
dt-bindings: clock: samsung: convert Exynos7 to dtschema
dt-bindings: clock: samsung: convert Exynos5433 to dtschema
dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712
dt-bindings: iio: adi,ltc2983: Fix 64-bit property sizes
dt-bindings: power: maxim,max17040: Fix incorrect type for 'maxim,rcomp'
dt-bindings: interrupt-controller: arm,gic-v3: Fix 'interrupts' cell size in example
dt-bindings: iio/magnetometer: yamaha,yas530: Fix invalid 'interrupts' in example
dt-bindings: clock: imx5: Drop clock consumer node from example
dt-bindings: Drop required 'interrupt-parent'
dt-bindings: net: ti,dp83869: Drop value on boolean 'ti,max-output-impedance'
dt-bindings: net: wireless: mt76: Fix 8-bit property sizes
dt-bindings: PCI: snps,dw-pcie-ep: Drop conflicting 'max-functions' schema
dt-bindings: i2c: st,stm32-i2c: Make each example a separate entry
dt-bindings: net: stm32-dwmac: Make each example a separate entry
dt-bindings: net: Cleanup MDIO node schemas
...
In commit 8a5a75e5e9 ("of/fdt: Make sure no-map does not remove
already reserved regions") we returned -EBUSY when trying to mark
regions as no-map when they intersect with reserved memory. The goal was
to find bad no-map reserved memory DT nodes that would unmap the kernel
text/data sections.
The problem is the reserved memory check will still trigger if the DT
has a /memreserve/ that completely subsumes the no-map memory carveouts
in the reserved memory node _and_ that region is also not part of the
memory reg property. For example in sc7180.dtsi we have the following
reserved-memory and memory node:
memory@80000000 {
/* We expect the bootloader to fill in the size */
reg = <0 0x80000000 0 0>;
};
smem_mem: memory@80900000 {
reg = <0x0 0x80900000 0x0 0x200000>;
no-map;
};
and the memreserve filled in by the bootloader is
/memreserve/ 0x80800000 0x400000;
while the /memory node is transformed into
memory@80000000 {
/* The bootloader fills in the size, and adds another region */
reg = <0 0x80000000 0 0x00800000>,
<0 0x80c00000 0 0x7f200000>;
};
The smem region is doubly reserved via /memreserve/ and by not being
part of the /memory reg property. This leads to the following warning
printed at boot.
OF: fdt: Reserved memory: failed to reserve memory for node 'memory@80900000': base 0x0000000080900000, size 2 MiB
Otherwise nothing really goes wrong because the smem region is not going
to be mapped by the kernel's direct linear mapping given that it isn't
part of the memory node. Therefore, let's only consider this to be a
problem if we're trying to mark a region as no-map and it is actually
memory that we're intending to keep out of the kernel's direct mapping
but it's already been reserved.
Acked-by: Mike Rapoport <rppt@kernel.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Quentin Perret <qperret@google.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Fixes: 8a5a75e5e9 ("of/fdt: Make sure no-map does not remove already reserved regions")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220107194233.2793146-1-swboyd@chromium.org
Eliminate the following coccicheck warning:
./drivers/of/unittest.c:1961:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220107002826.77939-1-yang.lee@linux.alibaba.com
The cells_name field of of_phandle_iterator might be NULL. Use the
phandle name instead. With this change instead of:
OF: /soc/pinctrl@1000000: (null) = 3 found 2
We get:
OF: /soc/pinctrl@1000000: phandle pinctrl@1000000 needs 3, found 2
Which is a more helpful messages making DT debugging easier.
In this particular example the phandle name looks like duplicate of the
same node name. But note that the first node is the parent node
(it->parent), while the second is the phandle target (it->node). They
happen to be the same in the case that triggered this improvement. See
commit 72cb4c48a4 ("arm64: dts: qcom: ipq6018: Fix gpio-ranges
property").
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/f6a68e0088a552ea9dfd4d8e3b5b586d92594738.1640881913.git.baruch@tkos.co.il
The cell_count field of of_phandle_iterator is the number of cells we
expect in the phandle arguments list when cells_name is missing. The
error message should show the number of cells we actually see.
Fixes: af3be70a32 ("of: Improve of_phandle_iterator_next() error message")
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/96519ac55be90a63fa44afe01480c30d08535465.1640881913.git.baruch@tkos.co.il
Some overlays are tracked when they are applied. The tracked overlays
are later removed after the overlay tests are completed. The old
implementation makes assumptions about the expected values for
overlay changeset id created by the overlay apply which result
in fragile code. The new code removes the assumptions.
A symptom that exposes a problem with the tracking code is a
warning "UBSAN: shift-out-of-bounds in drivers/of/unittest.c:1933:36",
Kernel Version: 5.15-rc7, PPC-64, Talos II. This results from variable
"id" value of -1 in the final line of of_unittest_untrack_overlay().
Reported-by: erhard_f@mailbox.org
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220101033329.1277779-3-frowand.list@gmail.com
Unittest inconsistently interchanges overlay changeset id and
overlay id. Change variable names of overlay id to overlay
changeset id.
Do not fix variable names in the overlay tracking functions
of_unittest_overlay_tracked(), of_unittest_track_overlay(), and
of_unittest_destroy_tracked_overlays() which will be replaced in
a following commit.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220101033329.1277779-2-frowand.list@gmail.com
Currently, we parse the "linux,usable-memory-range" property in
early_init_dt_scan_chosen(), to obtain the specified memory range of the
crash kernel. We then reserve the required memory after
early_init_dt_scan_memory() has identified all available physical memory.
Because the two pieces of code are separated far, the readability and
maintainability are reduced. So bring them together.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
(change the prototype of early_init_dt_check_for_usable_mem_range(), in
order to use it outside)
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Tested-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
To: devicetree@vger.kernel.org
To: linux-efi@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Use of the of_scan_flat_dt() function predates libfdt and is discouraged
as libfdt provides a nicer set of APIs. Rework
early_init_dt_scan_memory() to be called directly and use libfdt.
Cc: John Crispin <john@phrozen.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-mips@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211215150102.1303588-1-robh@kernel.org
Use of the of_scan_flat_dt() function predates libfdt and is discouraged
as libfdt provides a nicer set of APIs. Rework early_init_dt_scan_root()
to be called directly and use libfdt.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20211118181213.1433346-3-robh@kernel.org
Use of the of_scan_flat_dt() function predates libfdt and is discouraged
as libfdt provides a nicer set of APIs. Rework
early_init_dt_scan_chosen() to be called directly and use libfdt.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20211118181213.1433346-2-robh@kernel.org
Backmerging for v5.16-rc5. Resolves a conflict between drm-misc-next
and drm-misc-fixes in the vc4 driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
This code is required for both simplefb and simpledrm, so let's move it
into the OF core instead of having it as an ad-hoc initcall in the
drivers.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211212062407.138309-2-marcan@marcan.st
If an architecture does not support 64 bit dma addresses then testing
for an expected dma address >= 0x100000000 will fail.
Fixes: e0d072782c ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset")
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211212221852.233295-1-frowand.list@gmail.com
The struct device variable "dev_bogus" was triggering this warning
on a PowerPC build:
drivers/of/unittest.c: In function 'of_unittest_dma_ranges_one.constprop':
[...] >> The frame size of 1424 bytes is larger than 1024 bytes
[-Wframe-larger-than=]
This variable is now dynamically allocated.
Fixes: e0d072782c ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211210184636.7273-2-jim2101024@gmail.com
Since commit 0412841812 ("of/irq: Allow matching of an interrupt-map
local to an interrupt controller"), a handful of interrupt controllers
have stopped working correctly. This is due to the DT exposing a
non-sensical interrupt-map property, and their drivers relying on the
kernel ignoring this property.
Since we cannot realistically fix this terrible behaviour, add a quirk
for the limited set of devices that have implemented this monster,
and document that this is a pretty bad practice.
Fixes: 0412841812 ("of/irq: Allow matching of an interrupt-map local to an interrupt controller")
Cc: Rob Herring <robh@kernel.org>
Cc: John Crispin <john@phrozen.org>
Cc: Biwen Li <biwen.li@nxp.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211201114102.13446-1-maz@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
In the struct supplier_bindings the member 'node_not_dev' is described as
"The consumer node containing the property is never a device.", but that is
inconsistent with the behaviour of the code in of_link_property(), as it
calls of_get_compat_node() that starts parsing for a compatible property
from the node it gets passed to it. The proper behaviour is to start at the
node's parent, so let's do that.
While at it, let's take the opportunity to update the description of the
'node_not_dev' flag, as to clarify its purpose.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210902090221.820254-1-ulf.hansson@linaro.org
- 2 fixes due to DT node name changes on Arm, Ltd. boards
- Treewide rename of Ingenic CGU headers
- Update ST email addresses
- Remove Netlogic DT bindings
- Dropping few more cases of redundant 'maxItems' in schemas
- Convert toshiba,tc358767 bridge binding to schema
-----BEGIN PGP SIGNATURE-----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=ukBC
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Two fixes due to DT node name changes on Arm, Ltd. boards
- Treewide rename of Ingenic CGU headers
- Update ST email addresses
- Remove Netlogic DT bindings
- Dropping few more cases of redundant 'maxItems' in schemas
- Convert toshiba,tc358767 bridge binding to schema
* tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: watchdog: sunxi: fix error in schema
bindings: media: venus: Drop redundant maxItems for power-domain-names
dt-bindings: Remove Netlogic bindings
clk: versatile: clk-icst: Ensure clock names are unique
of: Support using 'mask' in making device bus id
dt-bindings: treewide: Update @st.com email address to @foss.st.com
dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml
dt-bindings: media: Update maintainers for st,stm32-cec.yaml
dt-bindings: mfd: timers: Update maintainers for st,stm32-timers
dt-bindings: timer: Update maintainers for st,stm32-timer
dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz
dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml
dt-bindings: Rename Ingenic CGU headers to ingenic,*.h
Since 0412841812 ("of/irq: Allow matching of an interrupt-map local
to an interrupt controller"), the irq code favors using an interrupt-map
over a interrupt-controller property if both are available, while the
earlier behaviour was to ignore the interrupt-map altogether.
However, we now end-up with the opposite behaviour, which is to
ignore the interrupt-controller property even if the interrupt-map
fails to match its input. This new behaviour breaks the AmigaOne
X1000 machine, which ships with an extremely "creative" (read:
broken) device tree.
Fix this by allowing the interrupt-controller property to be selected
when interrupt-map fails to match anything.
Fixes: 0412841812 ("of/irq: Allow matching of an interrupt-map local to an interrupt controller")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/78308692-02e6-9544-4035-3171a8e1e6d4@xenosoft.de
Link: https://lore.kernel.org/r/20211112143644.434995-1-maz@kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Commit 25b892b583 ("ARM: dts: arm: Update register-bit-led nodes
'reg' and node names") added a 'reg' property to nodes. This change has
the side effect of changing how the kernel generates the device name.
The assumption was a translatable 'reg' address is unique. However, in
the case of the register-bit-led binding (and a few others) that is not
the case. The 'mask' property must also be used in this case to make a
unique device name.
Fixes: 25b892b583 ("ARM: dts: arm: Update register-bit-led nodes 'reg' and node names")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211109164650.2233507-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----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=nsMh
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Conserve IRQs by setting up portdrv IRQs only when there are users
(Jan Kiszka)
- Rework and simplify _OSC negotiation for control of PCIe features
(Joerg Roedel)
- Remove struct pci_dev.driver pointer since it's redundant with the
struct device.driver pointer (Uwe Kleine-König)
Resource management:
- Coalesce contiguous host bridge apertures from _CRS to accommodate
BARs that cover more than one aperture (Kai-Heng Feng)
Sysfs:
- Check CAP_SYS_ADMIN before parsing user input (Krzysztof
Wilczyński)
- Return -EINVAL consistently from "store" functions (Krzysztof
Wilczyński)
- Use sysfs_emit() in endpoint "show" functions to avoid buffer
overruns (Kunihiko Hayashi)
PCIe native device hotplug:
- Ignore Link Down/Up caused by resets during error recovery so
endpoint drivers can remain bound to the device (Lukas Wunner)
Virtualization:
- Avoid bus resets on Atheros QCA6174, where they hang the device
(Ingmar Klein)
- Work around Pericom PI7C9X2G switch packet drop erratum by using
store and forward mode instead of cut-through (Nathan Rossi)
- Avoid trying to enable AtomicOps on VFs; the PF setting applies to
all VFs (Selvin Xavier)
MSI:
- Document that /sys/bus/pci/devices/.../irq contains the legacy INTx
interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry
Song)
VPD:
- Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere
in the possible VPD space; use these to simplify the cxgb3 driver
(Heiner Kallweit)
Peer-to-peer DMA:
- Add (not subtract) the bus offset when calculating DMA address
(Wang Lu)
ASPM:
- Re-enable LTR at Downstream Ports so they don't report Unsupported
Requests when reset or hot-added devices send LTR messages
(Mingchuang Qiao)
Apple PCIe controller driver:
- Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc
Zyngier)
Cadence PCIe controller driver:
- Return success when probe succeeds instead of falling into error
path (Li Chen)
HiSilicon Kirin PCIe controller driver:
- Reorganize PHY logic and add support for external PHY drivers
(Mauro Carvalho Chehab)
- Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro
Carvalho Chehab)
- Add Kirin 970 support (Mauro Carvalho Chehab)
- Make driver removable (Mauro Carvalho Chehab)
Intel VMD host bridge driver:
- If IOMMU supports interrupt remapping, leave VMD MSI-X remapping
enabled (Adrian Huang)
- Number each controller so we can tell them apart in
/proc/interrupts (Chunguang Xu)
- Avoid building on UML because VMD depends on x86 bare metal APIs
(Johannes Berg)
Marvell Aardvark PCIe controller driver:
- Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár)
- Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár)
- Downgrade PIO Response Status messages to debug level (Marek Behún)
- Preserve CRS SV (Config Request Retry Software Visibility) bit in
emulated Root Control register (Pali Rohár)
- Fix issue in configuring reference clock (Pali Rohár)
- Don't clear status bits for masked interrupts (Pali Rohár)
- Don't mask unused interrupts (Pali Rohár)
- Avoid code repetition in advk_pcie_rd_conf() (Marek Behún)
- Retry config accesses on CRS response (Pali Rohár)
- Simplify emulated Root Capabilities initialization (Pali Rohár)
- Fix several link training issues (Pali Rohár)
- Fix link-up checking via LTSSM (Pali Rohár)
- Fix reporting of Data Link Layer Link Active (Pali Rohár)
- Fix emulation of W1C bits (Marek Behún)
- Fix MSI domain .alloc() method to return zero on success (Marek
Behún)
- Read entire 16-bit MSI vector in MSI handler, not just low 8 bits
(Marek Behún)
- Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits
at startup; PCI core will set those as necessary (Pali Rohár)
- When operating as a Root Port, set class code to "PCI Bridge"
instead of the default "Mass Storage Controller" (Pali Rohár)
- Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't
implement this per spec (Pali Rohár)
- Add emulation of option ROM BAR since aardvark doesn't implement
this per spec (Pali Rohár)
MediaTek MT7621 PCIe controller driver:
- Add MediaTek MT7621 PCIe host controller driver and DT binding
(Sergio Paracuellos)
Qualcomm PCIe controller driver:
- Add SC8180x compatible string (Bjorn Andersson)
- Add endpoint controller driver and DT binding (Manivannan
Sadhasivam)
- Restructure to use of_device_get_match_data() (Prasad Malisetty)
- Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty)
Renesas R-Car PCIe controller driver:
- Remove unnecessary includes (Geert Uytterhoeven)
Rockchip DesignWare PCIe controller driver:
- Add DT binding (Simon Xue)
Socionext UniPhier Pro5 controller driver:
- Serialize INTx masking/unmasking (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Run dwc .host_init() method before registering MSI interrupt
handler so we can deal with pending interrupts left by bootloader
(Bjorn Andersson)
- Clean up Kconfig dependencies (Andy Shevchenko)
- Export symbols to allow more modular drivers (Luca Ceresoli)
TI DRA7xx PCIe controller driver:
- Allow host and endpoint drivers to be modules (Luca Ceresoli)
- Enable external clock if present (Luca Ceresoli)
TI J721E PCIe driver:
- Disable PHY when probe fails after initializing it (Christophe
JAILLET)
MicroSemi Switchtec management driver:
- Return error to application when command execution fails because an
out-of-band reset has cleared the device BARs, Memory Space Enable,
etc (Kelvin Cao)
- Fix MRPC error status handling issue (Kelvin Cao)
- Mask out other bits when reading of management VEP instance ID
(Kelvin Cao)
- Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions
(Kelvin Cao)
- Add check of event support (Logan Gunthorpe)
Miscellaneous:
- Remove unused pci_pool wrappers, which have been replaced by
dma_pool (Cai Huoqing)
- Use 'unsigned int' instead of bare 'unsigned' (Krzysztof
Wilczyński)
- Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof
Wilczyński)
- Fix some sscanf(), sprintf() format mismatches (Krzysztof
Wilczyński)
- Update PCI subsystem information in MAINTAINERS (Krzysztof
Wilczyński)
- Correct some misspellings (Krzysztof Wilczyński)"
* tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits)
PCI: Add ACS quirk for Pericom PI7C9X2G switches
PCI: apple: Configure RID to SID mapper on device addition
iommu/dart: Exclude MSI doorbell from PCIe device IOVA range
PCI: apple: Implement MSI support
PCI: apple: Add INTx and per-port interrupt support
PCI: kirin: Allow removing the driver
PCI: kirin: De-init the dwc driver
PCI: kirin: Disable clkreq during poweroff sequence
PCI: kirin: Move the power-off code to a common routine
PCI: kirin: Add power_off support for Kirin 960 PHY
PCI: kirin: Allow building it as a module
PCI: kirin: Add MODULE_* macros
PCI: kirin: Add Kirin 970 compatible
PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge
PCI: apple: Set up reference clocks when probing
PCI: apple: Add initial hardware bring-up
PCI: of: Allow matching of an interrupt-map local to a PCI device
of/irq: Allow matching of an interrupt-map local to an interrupt controller
irqdomain: Make of_phandle_args_to_fwspec() generally available
PCI: Do not enable AtomicOps on VFs
...
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().
The callers are updated with the below semantic patch:
@@
expression addr;
expression size;
@@
- memblock_free(addr, size);
+ memblock_phys_free(addr, size);
Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Not all files in the kernel should include mm.h. Migrating callers from
kmalloc to kvmalloc is easier if the kvmalloc functions are in slab.h.
[akpm@linux-foundation.org: move the new kvrealloc() also]
[akpm@linux-foundation.org: drivers/hwmon/occ/p9_sbe.c needs slab.h]
Link: https://lkml.kernel.org/r/20210622215757.3525604-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
of_irq_parse_raw() has a baked assumption that if a node has an
interrupt-controller property, it cannot possibly also have an
interrupt-map property (the latter being ignored).
This seems to be an odd behaviour, and there is no reason why we should
avoid supporting this use case. This is specially useful when a PCI root
port acts as an interrupt controller for PCI endpoints, such as this:
pcie0: pcie@690000000 {
[...]
port00: pci@0,0 {
device_type = "pci";
[...]
#address-cells = <3>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &port00 0 0 0 0>,
<0 0 0 2 &port00 0 0 0 1>,
<0 0 0 3 &port00 0 0 0 2>,
<0 0 0 4 &port00 0 0 0 3>;
};
};
Handle it by detecting that we have an interrupt-map early in the parsing,
and special case the situation where the phandle in the interrupt map
refers to the current node (which is the interesting case here).
Link: https://lore.kernel.org/r/20210929163847.2807812-3-maz@kernel.org
Tested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
These are all the driver updates for SoC specific drivers. There
are a couple of subsystems with individual maintainers picking up
their patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this
tree this time. There are only minor changes, but they depend
on other tegra driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process.
This depends on a small sound driver change that is included
here as well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains
a mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for
the "Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed
BMCs, something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better suspend/resume
support
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape,
allwinner, broadcom, and omap.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmGCvKgACgkQmmx57+YA
GNnNfw/8DDTfMUycVvtaNslYlWri0/2O0nSqhNIIbTAcVuD/x5qo/McDhKuv+ldM
BoTDMjRYZfQkrNXSEj3MaxB9E0o6Srva5SM8y4+Koe0VVtvEVovjYkXOhXqSEWWl
aqVIe0S6Y1rF/KxJlvAfGxYHb5d+6aYqzdmhjURpXNGxqpSHb9/hqisY97Q9TpnD
6lQZOz9d1JNDq0eOh1qjcfuMjg1EHZHDZJyioCvyX38KIl2q7p3ll2z/eqrrDhQZ
TrvL/YVosTXqBcAfi47Oz+n/CX2i0MrjVO8nfPSGOq5UL4Al3SZD4XYY96IOIQrH
+XGFigGGAkV2LfKSEPNJWaq7g+SiQUr2jc3p8b4Zxde8/+5M127/gotiPddyG2LX
1OnFRnPskgRApGqHjGEcEzzJUTag7Hc+YVH82TMEHZhSDMq6i30k9UnyfXsziZDV
8CrkOpjuSg+YxFv/83bfa1pIoYtFfjGr16mq4muajodnX7+b7My9iv+2Oo2iQM9y
DwRUKj7+eap23SEUpi4et6HlNpoF6yJMbt5Ae1k+gTK2DvQ4Cx6n4QJz/I7WC1Wp
BdVhvSH8XVppVLtQqODud+VWvLgLerRxUpGRdbS8r5VsnNUJTvaS4YGMpm9616G7
TrgUSSvsyu1lLqbWMh+pOCk4l3r64vSUn581hrIw6jtioNGvMdE=
=tUuj
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are all the driver updates for SoC specific drivers. There are a
couple of subsystems with individual maintainers picking up their
patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this tree this
time. There are only minor changes, but they depend on other tegra
driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process. This
depends on a small sound driver change that is included here as
well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains a
mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for the
"Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed BMCs,
something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better
suspend/resume support"
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
layerscape, allwinner, broadcom, and omap"
* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
optee: Fix spelling mistake "reclain" -> "reclaim"
Revert "firmware: qcom: scm: Add support for MC boot address API"
qcom: spm: allow compile-testing
firmware: arm_ffa: Remove unused 'compat_version' variable
soc: samsung: exynos-chipid: add exynosautov9 SoC support
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: aspeed: Add UART routing support
soc: fsl: dpio: rename the enqueue descriptor variable
soc: fsl: dpio: use an explicit NULL instead of 0
...
Linus Torvalds