To make the entropy pool a bit better we can toss in the
CID for eMMC and SD cards into it, usually the serial
number portion is at least unique.
This does not count as improvement of the entropy but
in practice it makes it a bit more random to mix in these
numbers.
Cc: Theodore Ts'o <tytso@mit.edu>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220425205442.1347837-1-linus.walleij@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Occasionally, user-land applications initiate longer timeout values for certain commands
through ioctl() system call. But so far we are still using a fixed timeout of 10 seconds
in mmc_poll_for_busy() on the ioctl() path, even if a custom timeout is specified in the
userspace application. This patch allows custom timeout values to override this default
timeout values on the ioctl path.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220423221623.1074556-3-huobean@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Only the device data is needed, not the entire struct of_device_id.
Use of_device_get_match_data() instead of open coding of_match_device().
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20220423221623.1074556-2-huobean@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The ARASAN MMC controller on Keystone 3 class of devices need the SDCD
line to be connected for proper functioning. Similar to the issue pointed
out in sdhci-of-arasan.c driver, commit 3794c54264 ("mmc:
sdhci-of-arasan: Set controller to test mode when no CD bit").
In cases where this can't be connected, add a quirk to force the
controller into test mode and set the TESTCD bit. Use the flag
"ti,fails-without-test-cd", to implement this above quirk when required.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20220425063120.10135-3-a-govindraju@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The ARASAN MMC controller on Keystone 3 class of devices needs the SDCD
line to be connected for proper functioning. Similar to the issue pointed
out in sdhci-of-arasan.c driver, commit 3794c54264 ("mmc:
sdhci-of-arasan: Set controller to test mode when no CD bit").
In cases where SDCD line is not connected, adding
"ti,fails-without-test-cd" in the DT node helps to indicate the
controller, that the SDCD line has been pulled down, using the TESTCD bit.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20220425063120.10135-2-a-govindraju@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add i.MX8DXL compatible string. It also needs "fsl,imx8qm-fec" compatible.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220419113516.1827863-10-abel.vesa@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Convert the sdhci-dove binding to JSON schema. The optional clocks
property was not in the original binding document but has been in the
dove.dtsi since commit 5b03df9ace ("ARM: dove: switch to DT clock
providers").
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220419024611.1327525-5-chris.packham@alliedtelesis.co.nz
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Convert the orion-sdio binding to JSON schema.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220419024611.1327525-4-chris.packham@alliedtelesis.co.nz
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The VQMMC is often provided by a level shifter, so drop a small note
in the bindings that this can be the case and how that is done.
It is helpful information since this is pretty common.
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220417144223.649201-1-linus.walleij@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
We iterate an extra time through the IRQ status handling
loop despite nothing had fired. Enabling the debug prints:
mmci-pl18x 80005000.mmc: op 01 arg 00000000 flags 000000e1
mmci-pl18x 80005000.mmc: irq0 (data+cmd) 00000001
mmci-pl18x 80005000.mmc: irq0 (data+cmd) 00000000
mmci-pl18x 80005000.mmc: op 01 arg 40ff8080 flags 000000e1
mmci-pl18x 80005000.mmc: irq0 (data+cmd) 00000001
mmci-pl18x 80005000.mmc: irq0 (data+cmd) 00000000
It is pointless to loop through the function when status
is zero. Just break the loop if the status is zero.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220416224549.627623-1-linus.walleij@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When GL9755 enters ASPM L1 sub-states, it will stay at L1.1 and will not
enter L1.2. The workaround is to toggle PM state to allow GL9755 to enter
ASPM L1.2.
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20220414094945.457500-1-benchuanggli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
We have a dedicated directory for platform_data meanwhile, don't spoil
the MMC directory with it.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220412093102.3428-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The SDHC controller in the imx8mn and imx8mp have the same controller
as the imx8mm which is slightly different than that of the imx7d.
Using the fallback of the imx8mm enables the controllers to support
HS400-ES which is not available on the imx7d. After discussion with NXP,
it turns out that the imx8qm should fall back to the imx8qxp, because
those have some additional flags not present in the imx8mm.
Mark the current state of the fallbacks as deprecated, and add the
proper fallbacks so in the future, the deprecated combination can be
removed and prevent any future devices from using the wrong fallback.
Suggested-by: haibo.chen@nxp.com
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220410193544.1745684-1-aford173@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To make it unambiguous that the hw_reset callback is for cards and not
for controllers, we add 'card' to the callback name and convert all
users in one go. We keep the argument as mmc_host, though, because the
callback is used very early when mmc_card is not yet populated.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220408080045.6497-4-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To make it unambiguous that mmc_sw_reset() is for cards and not for
controllers, we make the function argument mmc_card instead of mmc_host.
There are no users to convert currently.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220408080045.6497-3-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
We don't need to specify the Gen3 compatible entry for M3W because it
will be provided by the generic Gen3 fallback.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220404130551.20209-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The hardware evolved, so we only need to disable HS400 support on ES1.*
revisions. Update the code.
Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
[wsa: refactored to top-of-tree]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220404123404.16289-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The driver, OMAP specific, now omits clk_prepare/unprepare() steps, not
supported by OMAP custom implementation of clock API. However, non-CCF
stubs of those functions exist for use on such platforms until converted
to CCF.
Update the driver to be compatible with CCF implementation of clock API.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220402112004.129886-1-jmkrzyszt@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Since SD and MMC Highspeed modes are also valid for SPI let's parse
them too.
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20c6efa9a4c7423bbfb9352705c4a53a@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Despite mmc_ioc_multi_cmd::num_of_cmds is a 64-bit field, its maximum
value is limited to MMC_IOC_MAX_CMDS (only 255); using a 64-bit local
variable to hold a copy of that field leads to gcc generating ineffective
loop code: despite the source code using an *int* variable for the loop
counters, the 32-bit object code uses 64-bit unsigned counters. Also,
gcc has to drop the most significant word of that 64-bit variable when
calling kcalloc() and assigning to mmc_queue_req::ioc_count anyway.
Using the *unsigned int* variable instead results in a better code.
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/eea3b0bd-6091-f005-7189-b5b7868abdb6@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
MediaTek has a new version of mmc IP since mt8183. Some IO registers
are moved to top to improve hardware design and named as "host top
registers".
Add host top register in the reg binding description for mt8183 and
successors.
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220330094532.21721-2-tinghan.shen@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Convert the marvell,xenon-sdhci binding to JSON schema. Currently the
in-tree dts files don't validate because they use sdhci@ instead of mmc@
as required by the generic mmc-controller schema.
The compatible "marvell,sdhci-xenon" was not documented in the old
binding but it accompanies the of "marvell,armada-3700-sdhci" in the
armada-37xx SoC dtsi so this combination is added to the new binding
document.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220329220544.2132135-3-chris.packham@alliedtelesis.co.nz
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Further digging in the datasheets revealed that R-Car V3M also has no
HS400 support.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220404105831.5096-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When running on an system without any quirks (e.g. R-Car V3U), the
kernel crashes with a NULL pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000002
...
Hardware name: Renesas Falcon CPU and Breakout boards based on r8a779a0 (DT)
Workqueue: events_freezable mmc_rescan
...
Call trace:
renesas_sdhi_internal_dmac_start_dma+0x54/0x12c
tmio_process_mrq+0x124/0x274
Fix this by adding the missing checks for the validatity of the
priv->quirks pointer.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/cc3178c2ff60f640f4d5a071d51f6b0b1db37656.1648822020.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In SDIO mode, the sg list for requests can be unaligned with what the
STM32 SDMMC internal DMA can support. In that case, instead of failing,
use a temporary bounce buffer to copy from/to the sg list.
This buffer is limited to 1MB. But for that we need to also limit
max_req_size to 1MB. It has not shown any throughput penalties for
SD-cards or eMMC.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Link: https://lore.kernel.org/r/20220328145114.334577-1-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
After Shimoda-san's much appreciated refactoring of the quirk handling,
we can convert now 'dmac_only_one_rx' from an ugly global flag to a
regular quirk. This makes quirk handling more consistent and easier to
maintain. After this patch, soc_dma_quirks is completely gone, hooray!
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220320123016.57991-7-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
After Shimoda-san's much appreciated refactoring of the quirk handling,
we can convert now the 'fixed_addr_mode' from an ugly global flag to a
regular quirk. This makes quirk handling more consistent and easier to
maintain.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220320123016.57991-6-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The whitelist has been refactored away with a0fb3fc8af ("mmc:
renesas_sdhi: remove whitelist for internal DMAC") so the comment
doesn't make any sense anymore.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220320123016.57991-5-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When I read 'no_fallback', I forgot what fallback even though I was the
author of this change. Name it better to make the code easier to
understand.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220320123016.57991-4-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It is not explicitly expressed in the docs, but the needed data strobe
pin is indeed missing for D3. The BSP disables HS400 as well. This means
a little refactoring to reuse an already existing setup.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220320123016.57991-3-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
We moved quirk handling out of the SDHI core to the individual drivers.
So, no need to include headers needed for soc_device_match et al.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220320123016.57991-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Way back in commit 4f25580fb8 ("mmc: core: changes frequency to
hs_max_dtr when selecting hs400es"), Rockchip engineers noticed that
some eMMC don't respond to SEND_STATUS commands very reliably if they're
still running at a low initial frequency. As mentioned in that commit,
JESD84-B51 P49 suggests a sequence in which the host:
1. sets HS_TIMING
2. bumps the clock ("<= 52 MHz")
3. sends further commands
It doesn't exactly require that we don't use a lower-than-52MHz
frequency, but in practice, these eMMC don't like it.
The aforementioned commit tried to get that right for HS400ES, although
it's unclear whether this ever truly worked as committed into mainline,
as other changes/refactoring adjusted the sequence in conflicting ways:
08573eaf1a ("mmc: mmc: do not use CMD13 to get status after speed mode
switch")
53e60650f7 ("mmc: core: Allow CMD13 polling when switching to HS mode
for mmc")
In any case, today we do step 3 before step 2. Let's fix that, and also
apply the same logic to HS200/400, where this eMMC has problems too.
Resolves errors like this seen when booting some RK3399 Gru/Scarlet
systems:
[ 2.058881] mmc1: CQHCI version 5.10
[ 2.097545] mmc1: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
[ 2.209804] mmc1: mmc_select_hs400es failed, error -84
[ 2.215597] mmc1: error -84 whilst initialising MMC card
[ 2.417514] mmc1: mmc_select_hs400es failed, error -110
[ 2.423373] mmc1: error -110 whilst initialising MMC card
[ 2.605052] mmc1: mmc_select_hs400es failed, error -110
[ 2.617944] mmc1: error -110 whilst initialising MMC card
[ 2.835884] mmc1: mmc_select_hs400es failed, error -110
[ 2.841751] mmc1: error -110 whilst initialising MMC card
Ealier versions of this patch bumped to 200MHz/HS200 speeds too early,
which caused issues on, e.g., qcom-msm8974-fairphone-fp2. (Thanks for
the report Luca!) After a second look, it appears that aligns with
JESD84 / page 45 / table 28, so we need to keep to lower (HS / 52 MHz)
rates first.
Fixes: 08573eaf1a ("mmc: mmc: do not use CMD13 to get status after speed mode switch")
Fixes: 53e60650f7 ("mmc: core: Allow CMD13 polling when switching to HS mode for mmc")
Fixes: 4f25580fb8 ("mmc: core: changes frequency to hs_max_dtr when selecting hs400es")
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://lore.kernel.org/linux-mmc/11962455.O9o76ZdvQC@g550jk/
Reported-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220422100824.v4.1.I484f4ee35609f78b932bd50feed639c29e64997e@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=S7Ux
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Fix a corner case when calculating sched runqueue variables
That fix also removes a check for a zero divisor in the code, without
mentioning it. Vincent clarified that it's ok after I whined about it:
https://lore.kernel.org/all/CAKfTPtD2QEyZ6ADd5WrwETMOX0XOwJGnVddt7VHgfURdqgOS-Q@mail.gmail.com/
* tag 'sched_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/pelt: Fix attach_entity_load_avg() corner case
- Partly revert a change to our timer_interrupt() that caused lockups with high res
timers disabled.
- Fix a bug in KVM TCE handling that could corrupt kernel memory.
- Two commits fixing Power9/Power10 perf alternative event selection.
Thanks to: Alexey Kardashevskiy, Athira Rajeev, David Gibson, Frederic Barrat, Madhavan
Srinivasan, Miguel Ojeda, Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----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=xieK
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Partly revert a change to our timer_interrupt() that caused lockups
with high res timers disabled.
- Fix a bug in KVM TCE handling that could corrupt kernel memory.
- Two commits fixing Power9/Power10 perf alternative event selection.
Thanks to Alexey Kardashevskiy, Athira Rajeev, David Gibson, Frederic
Barrat, Madhavan Srinivasan, Miguel Ojeda, and Nicholas Piggin.
* tag 'powerpc-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/perf: Fix 32bit compile
powerpc/perf: Fix power10 event alternatives
powerpc/perf: Fix power9 event alternatives
KVM: PPC: Fix TCE handling for VFIO
powerpc/time: Always set decrementer in timer_interrupt()
-----BEGIN PGP SIGNATURE-----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=gcLL
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Read the reported error count from the proper register on
synopsys_edac
* tag 'edac_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/synopsys: Read the error count from the correct register
Since commit 559089e0a9 ("vmalloc: replace VM_NO_HUGE_VMAP with
VM_ALLOW_HUGE_VMAP"), the use of hugepage mappings for vmalloc is an
opt-in strategy, because it caused a number of problems that weren't
noticed until x86 enabled it too.
One of the issues was fixed by Nick Piggin in commit 3b8000ae18
("mm/vmalloc: huge vmalloc backing pages should be split rather than
compound"), but I'm still worried about page protection issues, and
VM_FLUSH_RESET_PERMS in particular.
However, like the hash table allocation case (commit f2edd118d02d:
"page_alloc: use vmalloc_huge for large system hash"), the use of
kvmalloc() should be safe from any such games, since the returned
pointer might be a SLUB allocation, and as such no user should
reasonably be using it in any odd ways.
We also know that the allocations are fairly large, since it falls back
to the vmalloc case only when a kmalloc() fails. So using a hugepage
mapping seems both safe and relevant.
This patch does show a weakness in the opt-in strategy: since the opt-in
flag is in the 'vm_flags', not the usual gfp_t allocation flags, very
few of the usual interfaces actually expose it.
That's not much of an issue in this case that already used one of the
fairly specialized low-level vmalloc interfaces for the allocation, but
for a lot of other vmalloc() users that might want to opt in, it's going
to be very inconvenient.
We'll either have to fix any compatibility problems, or expose it in the
gfp flags (__GFP_COMP would have made a lot of sense) to allow normal
vmalloc() users to use hugepage mappings. That said, the cases that
really matter were probably already taken care of by the hash tabel
allocation.
Link: https://lore.kernel.org/all/20220415164413.2727220-1-song@kernel.org/
Link: https://lore.kernel.org/all/CAHk-=whao=iosX1s5Z4SF-ZGa-ebAukJoAdUJFk5SPwnofV+Vg@mail.gmail.com/
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: Song Liu <songliubraving@fb.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use vmalloc_huge() in alloc_large_system_hash() so that large system
hash (>= PMD_SIZE) could benefit from huge pages.
Note that vmalloc_huge only allocates huge pages for systems with
HAVE_ARCH_HUGE_VMALLOC.
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=Y9T8
-----END PGP SIGNATURE-----
Merge tag '5.18-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
- cap maximum sector size reported to avoid mount problems
- reference count fix
- fix filename rename race
* tag '5.18-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: set fixed sector size to FS_SECTOR_SIZE_INFORMATION
ksmbd: increment reference count of parent fp
ksmbd: remove filename in ksmbd_file
One fix for an information leak caused by copying a buffer to
userspace without checking for error first in the sr driver.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYmRQ+SYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishVhPAP9a/cHI
0uZ8IC5LBjpXEyvvniGBIXz87i2IKR3XSme6BwEAxeH5AX54q4Pkhbr+izdEQM9/
A09GaOdzQXHBsgD92+I=
=MEyO
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"One fix for an information leak caused by copying a buffer to
userspace without checking for error first in the sr driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sr: Do not leak information in ioctl
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYmPu9QAKCRCAXGG7T9hj
vmvYAP4sD8jB17bSSUq9jGhNIr3vc6UZ6Oz+8R6G6CvSBhOa0gEAqWTU04RVHeYy
Sqs6qs9dvSdF2AvGR9DydrkCF5n6sgU=
=s5yA
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.18-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"A simple cleanup patch and a refcount fix for Xen on Arm"
* tag 'for-linus-5.18-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
arm/xen: Fix some refcount leaks
xen: Convert kmap() to kmap_local_page()
panel:
- revert of patch that broke panel/bridge issues
dma-buf:
- remove unused header file.
amdgpu:
- partial revert of locking change
radeon:
- fix dma_resv logic inversion
panel:
- pi touchscreen panel init fixes
vc4:
- build fix
- runtime pm refcount fix
vmwgfx:
- refcounting fix
-----BEGIN PGP SIGNATURE-----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=dkFQ
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2022-04-23' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"Maarten was away, so Maxine stepped up and sent me the drm-fixes
merge, so no point leaving it for another week.
The big change is an OF revert around bridge/panels, it may have some
driver fallout, but hopefully this revert gets them shook out in the
next week easier.
Otherwise it's a bunch of locking/refcounts across drivers, a radeon
dma_resv logic fix and some raspberry pi panel fixes.
panel:
- revert of patch that broke panel/bridge issues
dma-buf:
- remove unused header file.
amdgpu:
- partial revert of locking change
radeon:
- fix dma_resv logic inversion
panel:
- pi touchscreen panel init fixes
vc4:
- build fix
- runtime pm refcount fix
vmwgfx:
- refcounting fix"
* tag 'drm-fixes-2022-04-23' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: partial revert "remove ctx->lock" v2
Revert "drm: of: Lookup if child node has panel or bridge"
Revert "drm: of: Properly try all possible cases for bridge/panel detection"
drm/vc4: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
drm/vmwgfx: Fix gem refcounting and memory evictions
drm/vc4: Fix build error when CONFIG_DRM_VC4=y && CONFIG_RASPBERRYPI_FIRMWARE=m
drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare
drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised
dma-buf-map: remove renamed header file
drm/radeon: fix logic inversion in radeon_sync_resv
- a new set of keycodes to be used by marine navigation systems
- minor fixes to omap4-keypad and cypress-sf drivers
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCYmODEQAKCRBAj56VGEWX
nBpOAP42d5FvJiPnVfOzbUb8KT3Btd5g3ze5m+qMgfqirsxatwEApoCZkx4hDGW8
/aEHF6LVzpbhz7Gc+4mGdVP8CcWAPAM=
=9csQ
-----END PGP SIGNATURE-----
Merge tag 'input-for-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a new set of keycodes to be used by marine navigation systems
- minor fixes to omap4-keypad and cypress-sf drivers
* tag 'input-for-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: add Marine Navigation Keycodes
Input: omap4-keypad - fix pm_runtime_get_sync() error checking
Input: cypress-sf - register a callback to disable the regulators
Linus Walleij