There are cleanups and minor bugfixes across several SoC specific
drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
Renesas, ZynqMP
Noteworthy new features are:
- The op-tee firmware driver gains support for asynchronous
notifications from secure-world firmware.
- Qualcomm platforms gain support for new SoC types in various
drivers: power domain, cache controller, RPM sleep, soc-info
- Samsung SoC drivers gain support for new SoCs in ChipID and PMU,
as well as a new USIv2 driver that handles various types of
serial communiction (uart, i2c, spi)
- Renesas adds support for R-Car S4-8 (R8A779F0) in multiple
drivers, as well as memory controller support for RZ/G2L
(R9A07G044).
- Apple M1 gains support for the PMGR power management driver
-----BEGIN PGP SIGNATURE-----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=tlZT
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are cleanups and minor bugfixes across several SoC specific
drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
Renesas, ZynqMP
Noteworthy new features are:
- The op-tee firmware driver gains support for asynchronous
notifications from secure-world firmware.
- Qualcomm platforms gain support for new SoC types in various
drivers: power domain, cache controller, RPM sleep, soc-info
- Samsung SoC drivers gain support for new SoCs in ChipID and PMU, as
well as a new USIv2 driver that handles various types of serial
communiction (uart, i2c, spi)
- Renesas adds support for R-Car S4-8 (R8A779F0) in multiple drivers,
as well as memory controller support for RZ/G2L (R9A07G044).
- Apple M1 gains support for the PMGR power management driver"
* tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
soc: qcom: rpmh-rsc: Fix typo in a comment
soc: qcom: socinfo: Add SM6350 and SM7225
dt-bindings: arm: msm: Don't mark LLCC interrupt as required
dt-bindings: firmware: scm: Add SM6350 compatible
dt-bindings: arm: msm: Add LLCC for SM6350
soc: qcom: rpmhpd: Sort power-domain definitions and lists
soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280
soc: qcom: rpmhpd: Rename rpmhpd struct names
soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao
soc: qcom: socinfo: add SM8450 ID
soc: qcom: rpmhpd: Add SM8450 power domains
dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding
soc: qcom: smem: Update max processor count
dt-bindings: arm: qcom: Document SM8450 SoC and boards
dt-bindings: firmware: scm: Add SM8450 compatible
dt-bindings: arm: cpus: Add kryo780 compatible
soc: qcom: rpmpd: Add support for sm6125
dt-bindings: qcom-rpmpd: Add sm6125 power domains
soc: qcom: aoss: constify static struct thermal_cooling_device_ops
PM: AVS: qcom-cpr: Use div64_ul instead of do_div
...
We add the ostd setting for mt8195. It introduces a KE for the
previous SoC which doesn't have ostd setting. This is the log:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000080
...
pc : mtk_smi_larb_config_port_gen2_general+0x64/0x130
lr : mtk_smi_larb_resume+0x54/0x98
...
Call trace:
mtk_smi_larb_config_port_gen2_general+0x64/0x130
pm_generic_runtime_resume+0x2c/0x48
__genpd_runtime_resume+0x30/0xa8
genpd_runtime_resume+0x94/0x2c8
__rpm_callback+0x44/0x150
rpm_callback+0x6c/0x78
rpm_resume+0x310/0x558
__pm_runtime_resume+0x3c/0x88
In the code: larbostd = larb->larb_gen->ostd[larb->larbid],
if "larb->larb_gen->ostd" is null, the "larbostd" is the offset(e.g.
0x80 above), it's also a valid value, then accessing "larbostd[i]" in the
"for" loop will cause the KE above. To avoid this issue, initialize
"larbostd" to NULL when the SoC doesn't have ostd setting.
Fixes: fe6dd2a401 ("memory: mtk-smi: mt8195: Add initial setting for smi-larb")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211108082429.15080-1-yong.wu@mediatek.com
Link: https://lore.kernel.org/r/20211124085042.9649-3-krzysztof.kozlowski@canonical.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Don't use _HIZ macros but also provide a val. This is more consistent
with the other macros and, thus, easier to read. Also shorter.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20211119110442.4946-1-wsa+renesas@sang-engineering.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Instead of writing fixed values with undocumented bits which happen to
be set on some SoCs, better switch to read-modify-write operations
changing only bits which are documented. This is way more future-proof
as we don't know yet how these bits may be on upcoming SoCs.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211117093710.14430-1-wsa+renesas@sang-engineering.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
No need to open code regmap_update_bits().
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211117102902.20062-1-wsa+renesas@sang-engineering.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
SPI Multi I/O Bus Controller on RZ/G2L SoC is almost identical to
the RPC-IF interface found on R-Car Gen3 SoC's.
This patch adds a new compatible string for the RZ/G2L family so
that the timing values on RZ/G2L can be adjusted.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20211025205631.21151-8-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
RPCIF_DIRMAP_SIZE may differ on various SoC's. Instead of using
RPCIF_DIRMAP_SIZE macro use resource size to get dirmap size
which is already part of struct rpcif.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211025205631.21151-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Tegra20 EMC driver uses simple devfreq governor. Add simple devfreq
governor to the list of the Tegra20 EMC driver module softdeps to allow
userspace initramfs tools like dracut to automatically pull the devfreq
module into ramfs image together with the EMC module.
Reported-by: Nicolas Chauvet <kwizart@gmail.com>
Suggested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20211019231524.888-1-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
ASUS Transformer TF101 doesn't provide RAM code and in this case memory
timings should be selected based on identity information read out from
SDRAM chip. Support matching timings by LPDDR2 configuration.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20211006224659.21434-10-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Add common helpers for reading and parsing standard LPDDR2 configuration
properties.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20211006224659.21434-9-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
1. Renesas RPC: fix unaligned bus access and QSPI data transfers in
manual modes.
2. Renesas RPC: select RESET_CONTROLLER as it is necessary for
operation.
3. FSL IFC: fix error paths.
4. Broadcom: allow building as module.
-----BEGIN PGP SIGNATURE-----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=ZsTv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=OOXj
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.16
1. Renesas RPC: fix unaligned bus access and QSPI data transfers in
manual modes.
2. Renesas RPC: select RESET_CONTROLLER as it is necessary for
operation.
3. FSL IFC: fix error paths.
4. Broadcom: allow building as module.
* tag 'memory-controller-drv-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: fsl_ifc: fix leak of irq and nand_irq in fsl_ifc_ctrl_probe
memory: renesas-rpc-if: RENESAS_RPCIF should select RESET_CONTROLLER
memory: brcmstb_dpfe: Allow building Broadcom STB DPFE as module
memory: samsung: describe drivers in KConfig
memory: renesas-rpc-if: Avoid unaligned bus access for HyperFlash
memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode
dt-bindings: rpc: renesas-rpc-if: Add support for the R8A779A0 RPC-IF
Link: https://lore.kernel.org/r/20211010175836.13302-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add MT8195 support to the Mediatek SMI memory controller driver. This
brings also several cleanups and minor enhancements before adding actual
new device support.
-----BEGIN PGP SIGNATURE-----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=mga+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=HHse
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-mtk-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.14 - Mediatek
Add MT8195 support to the Mediatek SMI memory controller driver. This
brings also several cleanups and minor enhancements before adding actual
new device support.
* tag 'memory-controller-drv-mtk-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
MAINTAINERS: Add entry for MediaTek SMI
memory: mtk-smi: mt8195: Add initial setting for smi-larb
memory: mtk-smi: mt8195: Add initial setting for smi-common
memory: mtk-smi: mt8195: Add smi support
memory: mtk-smi: Use devm_platform_ioremap_resource
memory: mtk-smi: Add clocks for smi-sub-common
memory: mtk-smi: Add device link for smi-sub-common
memory: mtk-smi: Add error handle for smi_probe
memory: mtk-smi: Adjust some code position
memory: mtk-smi: Rename smi_gen to smi_type
memory: mtk-smi: Use clk_bulk clock ops
dt-bindings: memory: mediatek: Add mt8195 smi sub common
dt-bindings: memory: mediatek: Add mt8195 smi binding
Link: https://lore.kernel.org/r/20211010175836.13302-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The error handling code of fsl_ifc_ctrl_probe is problematic. When
fsl_ifc_ctrl_init fails or request_irq of fsl_ifc_ctrl_dev->irq fails,
it forgets to free the irq and nand_irq. Meanwhile, if request_irq of
fsl_ifc_ctrl_dev->nand_irq fails, it will still free nand_irq even if
the request_irq is not successful.
Fix this by refactoring the error handling code.
Fixes: d2ae2e20fb ("driver/memory:Move Freescale IFC driver to a common driver")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Link: https://lore.kernel.org/r/20210925151434.8170-1-mudongliangabcd@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
fix debugfs_simple_attr.cocci warning:
drivers/memory/tegra/tegra210-emc-core.c:1665:0-23: WARNING:tegra210_emc_debug_min_rate_fops
should be defined with DEFINE_DEBUGFS_ATTRIBUTE
Commit 6fc5f1adf5 ("memory: tegra210-emc: replace
DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE") fixed the same
warning, but didn't fix all matches in this file at once.
Signed-off-by: Kai Song <songkai01@inspur.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211005043514.9650-1-songkai01@inspur.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The Renesas RPC-IF driver calls devm_reset_control_get_exclusive(),
which returns -ENOTSUPP if CONFIG_RESET_CONTROLLER is not enabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/e443aa66d146da5646b7ebece8876545b8621063.1633447756.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Return the error code when command fails.
Fixes: 13324edbe9 ("memory: tegra186-emc: Handle errors in BPMP response")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://lore.kernel.org/r/20210928021545.3774677-1-yangyingliang@huawei.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Allow building the Broadcom STB DPFE driver as a module, it is already a
platform driver proper with all of the resource releasing device
managed.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
Link: https://lore.kernel.org/r/20210924031459.8911-1-f.fainelli@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
HyperFlash devices in Renesas SoCs use 2-bytes addressing, according
to HW manual paragraph 62.3.3 (which officially describes Serial Flash
access, but seems to be applicable to HyperFlash too). And 1-byte bus
read operations to 2-bytes unaligned addresses in external address space
read mode work incorrectly (returns the other byte from the same word).
Function memcpy_fromio(), used by the driver to read data from the bus,
in ARM64 architecture (to which Renesas cores belong) uses 8-bytes
bus accesses for appropriate aligned addresses, and 1-bytes accesses
for other addresses. This results in incorrect data read from HyperFlash
in unaligned cases.
This issue can be reproduced using something like the following commands
(where mtd1 is a parition on Hyperflash storage, defined properly
in a device tree):
[Correct fragment, read from Hyperflash]
root@rcar-gen3:~# dd if=/dev/mtd1 of=/tmp/zz bs=32 count=1
root@rcar-gen3:~# hexdump -C /tmp/zz
00000000 f4 03 00 aa f5 03 01 aa f6 03 02 aa f7 03 03 aa |................|
00000010 00 00 80 d2 40 20 18 d5 00 06 81 d2 a0 18 a6 f2 |....@ ..........|
00000020
[Incorrect read of the same fragment: see the difference at offsets 8-11]
root@rcar-gen3:~# dd if=/dev/mtd1 of=/tmp/zz bs=12 count=1
root@rcar-gen3:~# hexdump -C /tmp/zz
00000000 f4 03 00 aa f5 03 01 aa 03 03 aa aa |............|
0000000c
Fix this issue by creating a local replacement of the copying function,
that performs only properly aligned bus accesses, and is used for reading
from HyperFlash.
Fixes: ca7d8b980b ("memory: add Renesas RPC-IF driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Link: https://lore.kernel.org/r/20210922184830.29147-1-andrew_gabbasov@mentor.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
This patch fixes 2 problems:
[1] The output warning logs and data loss when performing
mount/umount then remount the device with jffs2 format.
[2] The access width of SMWDR[0:1]/SMRDR[0:1] register is wrong.
This is the sample warning logs when performing mount/umount then
remount the device with jffs2 format:
jffs2: jffs2_scan_inode_node(): CRC failed on node at 0x031c51d4:
Read 0x00034e00, calculated 0xadb272a7
The reason for issue [1] is that the writing data seems to
get messed up.
Data is only completed when the number of bytes is divisible by 4.
If you only have 3 bytes of data left to write, 1 garbage byte
is inserted after the end of the write stream.
If you only have 2 bytes of data left to write, 2 bytes of '00'
are added into the write stream.
If you only have 1 byte of data left to write, 2 bytes of '00'
are added into the write stream. 1 garbage byte is inserted after
the end of the write stream.
To solve problem [1], data must be written continuously in serial
and the write stream ends when data is out.
Following HW manual 62.2.15, access to SMWDR0 register should be
in the same size as the transfer size specified in the SPIDE[3:0]
bits in the manual mode enable setting register (SMENR).
Be sure to access from address 0.
So, in 16-bit transfer (SPIDE[3:0]=b'1100), SMWDR0 should be
accessed by 16-bit width.
Similar to SMWDR1, SMDDR0/1 registers.
In current code, SMWDR0 register is accessed by regmap_write()
that only set up to do 32-bit width.
To solve problem [2], data must be written 16-bit or 8-bit when
transferring 1-byte or 2-byte.
Fixes: ca7d8b980b ("memory: add Renesas RPC-IF driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Duc Nguyen <duc.nguyen.ub@renesas.com>
[wsa: refactored to use regmap only via reg_read/reg_write]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210922091007.5516-1-wsa+renesas@sang-engineering.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Use devm_add_action_or_reset() instead of devm_add_action() to simplify
the error handling.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210922130002.586-1-caihuoqing@baidu.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
To improve the performance, We add some initial setting for smi larbs.
there are two part:
1), Each port has the special ostd(outstanding) value in each larb.
2), Two general settings for each larb.
a. THRT_UPDATE: the value in bits[7:4] of 0x24 is not so good.
The HW default is 4, and we expect it is 5, thus, add a flag to update
it. This is only a DE recommendatory value, not a actual issue.
The register name(THRT_CON) means: throttling control, and the field
RD_NU_LMT means: Read Non-ultra commands limit.
This change means update the Read non-ultra command from 4 to 5 here.
b. SW_FLAG: Set 1 to the FLAG register. this is only for helping
debug. We could confirm if the larb is reset from this value is 1 or 0.
In some SoC, this setting maybe changed dynamically for some special case
like 4K, and this initial setting is enough in mt8195.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210914113703.31466-13-yong.wu@mediatek.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
To improve the performance, add initial setting for smi-common.
some register use some fix setting(suggested from DE).
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210914113703.31466-12-yong.wu@mediatek.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
MT8195 has two smi-common, their IP are the same. Only the larbs that
connect with the smi-common are different. thus the bus_sel are different
for the two smi-common.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Link: https://lore.kernel.org/r/20210914113703.31466-11-yong.wu@mediatek.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
SMI sub common only have one output port. thus it has only one gals
clocks(gals0). then, smi-sub-common require the three clocks(apb/smi/gals0)
in has_gals case.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210914113703.31466-9-yong.wu@mediatek.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
In mt8195, there are some larbs connect with the smi-sub-common, then
connect with smi-common.
Before we create device link between smi-larb with smi-common. If we have
sub-common, we should use device link the smi-larb and smi-sub-common,
then use device link between the smi-sub-common with smi-common. This is
for enabling clock/power automatically.
Move the device link code to a new interface for reusing.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Link: https://lore.kernel.org/r/20210914113703.31466-8-yong.wu@mediatek.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
No functional change. Only move the code position to make the code more
readable.
1. Put the register smi-common above smi-larb. Prepare to add some others
register setting.
2. Put mtk_smi_larb_unbind around larb_bind.
3. Sort the SoC data alphabetically. and put them in one line as the
current kernel allow it.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Link: https://lore.kernel.org/r/20210914113703.31466-6-yong.wu@mediatek.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Prepare for adding smi sub common. Only rename from smi_gen to smi_type.
No functional change.
About the current "smi_gen", we have gen1/gen2 that stand for the
generation number for HW. I plan to add a new type(sub_common), then the
name "gen" is not proper.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Link: https://lore.kernel.org/r/20210914113703.31466-5-yong.wu@mediatek.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Use clk_bulk interface instead of the orginal one to simplify the code.
For SMI larbs: Require apb/smi clocks while gals is optional.
For SMI common: Require apb/smi/gals0/gal1 in has_gals case. Otherwise,
also only require apb/smi, No optional clk here.
About the "has_gals" flag, for smi larbs, the gals clock also may be
optional even this platform support it. thus it always use
*_bulk_get_optional, then the flag has_gals is unnecessary. Remove it.
The smi_common's has_gals still keep it.
Also remove clk fail logs since bulk interface already output fail log.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210914113703.31466-4-yong.wu@mediatek.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The return value from tegra_bpmp_transfer indicates the success or
failure of the IPC transaction with BPMP. If the transaction
succeeded, we also need to check the actual command's result code.
Add code to do this.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://lore.kernel.org/r/20210915085517.1669675-3-mperttunen@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
State syncing works properly now, previously the sync callback was never
invoked. Apparently it was fixed in drivers core, so let's remove the
hack. The state won't be synced until all consumer drivers of devices
that reference memory controller in a device-tree are probed, i.e. keeping
bandwidth at maximum until both display and devfreq drivers are probed.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210912183009.6400-1-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Fix the following coccicheck warning:
drivers/memory/tegra/tegra210-emc-core.c:1665:0-23:WARNING
tegra210_emc_debug_min_rate_fops should be defined with DEFINE_DEBUGFS_ATTRIBUTE
Signed-off-by: Jing Yangyang <jing.yangyang@zte.com.cn>
Link: https://lore.kernel.org/r/20210825063739.70260-1-deng.changcheng@zte.com.cn
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Fix the following coccicheck warning:
drivers/memory/tegra/tegra30-emc.c:1322:0-23:WARNING:
tegra_emc_debug_max_rate_fops should be defined with DEFINE_DEBUGFS_ATTRIBUTE
Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn>
Link: https://lore.kernel.org/r/20210821035223.28282-1-jing.yangyang@zte.com.cn
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Don't populate the array list on the stack but instead it
static const. Makes the object code smaller by 110 bytes:
Before:
text data bss dec hex filename
37713 21992 64 59769 e979 .../tegra/tegra210-emc-cc-r21021.o
After:
text data bss dec hex filename
37539 22056 64 59659 e90b .../tegra/tegra210-emc-cc-r21021.o
(gcc version 10.3.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210819133155.10441-1-colin.king@canonical.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
We can now switch over to using cpu_pm instead of custom calls and make
the context save and restore functions static.
Let's also move the save and restore functions to avoid adding forward
declarations for them. And get rid of the static data pointer while at it.
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210727101034.32148-2-tony@atomide.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
We want to clear any unused GPMC_CS_CONFIG7 register on restore to
ensure unused chip selects are not enabled.
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210727101034.32148-1-tony@atomide.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The tegra186_mc_client_sid_override() is only called from
an #ifdef block:
drivers/memory/tegra/tegra186.c:74:13: error: 'tegra186_mc_client_sid_override' defined but not used [-Werror=unused-function]
74 | static void tegra186_mc_client_sid_override(struct tegra_mc *mc,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add another #ifdef around the called function.
Fixes: 393d66fd2c ("memory: tegra: Implement SID override programming")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20210722090748.1157470-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Second set of changes for Tegra SoC memory controller drivers,
containing patchset from Thierry Reding:
"The goal here is to avoid early identity mappings altogether and instead
postpone the need for the identity mappings to when devices are attached
to the SMMU. This works by making the SMMU driver coordinate with the
memory controller driver on when to start enforcing SMMU translations.
This makes Tegra behave in a more standard way and pushes the code to
deal with the Tegra-specific programming into the NVIDIA SMMU
implementation."
This pulls a dependency from Will Deacon (ARM SMMU driver) and contains
further ARM SMMU driver patches to resolve complex dependencies between
different patchsets. The pull from Will contains only one patch
("Implement ->probe_finalize()"). Further work in Will's tree might
depend on this patch, therefore patch was applied there.
On the other hand, this ("Implement ->probe_finalize()") patch is also a
dependency for ARM SMMU driver changes for Tegra. These changes,
bringing seamless transition from the firmware framebuffer to the OS
framebuffer, depend on earlier Tegra memory controller driver patches.
-----BEGIN PGP SIGNATURE-----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=qHnq
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=pB39
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-tegra-5.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.14 - Tegra SoC, part two
Second set of changes for Tegra SoC memory controller drivers,
containing patchset from Thierry Reding:
"The goal here is to avoid early identity mappings altogether and instead
postpone the need for the identity mappings to when devices are attached
to the SMMU. This works by making the SMMU driver coordinate with the
memory controller driver on when to start enforcing SMMU translations.
This makes Tegra behave in a more standard way and pushes the code to
deal with the Tegra-specific programming into the NVIDIA SMMU
implementation."
This pulls a dependency from Will Deacon (ARM SMMU driver) and contains
further ARM SMMU driver patches to resolve complex dependencies between
different patchsets. The pull from Will contains only one patch
("Implement ->probe_finalize()"). Further work in Will's tree might
depend on this patch, therefore patch was applied there.
On the other hand, this ("Implement ->probe_finalize()") patch is also a
dependency for ARM SMMU driver changes for Tegra. These changes,
bringing seamless transition from the firmware framebuffer to the OS
framebuffer, depend on earlier Tegra memory controller driver patches.
* tag 'memory-controller-drv-tegra-5.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: (37 commits)
iommu/arm-smmu: Use Tegra implementation on Tegra186
iommu/arm-smmu: tegra: Implement SID override programming
iommu/arm-smmu: tegra: Detect number of instances at runtime
dt-bindings: arm-smmu: Add Tegra186 compatible string
memory: tegra: Delete dead debugfs checking code
iommu/arm-smmu: Implement ->probe_finalize()
memory: tegra: Implement SID override programming
memory: tegra: Split Tegra194 data into separate file
memory: tegra: Add memory client IDs to tables
memory: tegra: Unify drivers
memory: tegra: Only initialize reset controller if available
memory: tegra: Make IRQ support opitonal
memory: tegra: Parameterize interrupt handler
memory: tegra: Extract setup code into callback
memory: tegra: Make per-SoC setup more generic
memory: tegra: Push suspend/resume into SoC drivers
memory: tegra: Introduce struct tegra_mc_ops
memory: tegra: Unify struct tegra_mc across SoC generations
memory: tegra: Consolidate register fields
memory: tegra30-emc: Use devm_tegra_core_dev_init_opp_table()
...
Link: https://lore.kernel.org/r/20210614195200.21657-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Bigger work around ARM Primecell PL35x SMC memory controller driver by
Miquel Raynal built on previous series from Naga Sureshkumar Relli.
This includes bindings cleanup and correction, converting these to
dtschema and several cleanyps in pl353-smc driver.
-----BEGIN PGP SIGNATURE-----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=iNR6
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-pl353-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.14 - PL353
Bigger work around ARM Primecell PL35x SMC memory controller driver by
Miquel Raynal built on previous series from Naga Sureshkumar Relli.
This includes bindings cleanup and correction, converting these to
dtschema and several cleanyps in pl353-smc driver.
* tag 'memory-controller-drv-pl353-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
dt-binding: memory: pl353-smc: Convert to yaml
MAINTAINERS: Add PL353 SMC entry
memory: pl353-smc: Declare variables following a reverse christmas tree order
memory: pl353-smc: Avoid useless acronyms in descriptions
memory: pl353-smc: Let lower level controller drivers handle inits
memory: pl353-smc: Rename goto labels
memory: pl353-smc: Fix style
dt-binding: memory: pl353-smc: Fix the NAND controller node in the example
dt-binding: memory: pl353-smc: Drop unsupported nodes from the example
dt-binding: memory: pl353-smc: Fix the example syntax and style
dt-binding: memory: pl353-smc: Describe the child reg property
dt-binding: memory: pl353-smc: Drop the partitioning section
dt-binding: memory: pl353-smc: Document the range property
dt-binding: memory: pl353-smc: Rephrase the binding
Link: https://lore.kernel.org/r/20210611140659.61980-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Olof Johansson <olof@lixom.net>
APER does not mean anything, while it seems legitimate to call this
clock the AXI peripheral clock.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20210610082040.2075611-14-miquel.raynal@bootlin.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
There is no point in having all these definitions at the SMC bus level,
these are extremely tight to the NAND controller driver implementation,
are not particularly generic, imply more boilerplate than needed, do
not really follow the device model by receiving no argument and some of
them are actually buggy.
Let's get rid of these right now as there is no current user and keep
this driver at a simple level: only the SMC bare initializations.
The NAND controller driver which I am going to introduce will take care
of redefining properly all these helpers and using them directly.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20210610082040.2075611-13-miquel.raynal@bootlin.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
A goto label is better named
do_something:
than
out_something_to_do:
Use the former wording and really describe what the jump involves.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20210610082040.2075611-12-miquel.raynal@bootlin.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Linus Torvalds