Error Disconnect Recover (EDR) is a feature that allows ACPI firmware to
notify OSPM that a device has been disconnected due to an error condition
(ACPI v6.3, sec 5.6.6). OSPM advertises its support for EDR on PCI devices
via _OSC (see [1], sec 4.5.1, table 4-4). The OSPM EDR notify handler
should invalidate software state associated with disconnected devices and
may attempt to recover them. OSPM communicates the status of recovery to
the firmware via _OST (sec 6.3.5.2).
For PCIe, firmware may use Downstream Port Containment (DPC) to support
EDR. Per [1], sec 4.5.1, table 4-6, even if firmware has retained control
of DPC, OSPM may read/write DPC control and status registers during the EDR
notification processing window, i.e., from the time it receives an EDR
notification until it clears the DPC Trigger Status.
Note that per [1], sec 4.5.1 and 4.5.2.4,
1. If the OS supports EDR, it should advertise that to firmware by
setting OSC_PCI_EDR_SUPPORT in _OSC Support.
2. If the OS sets OSC_PCI_EXPRESS_DPC_CONTROL in _OSC Control to request
control of the DPC capability, it must also set OSC_PCI_EDR_SUPPORT in
_OSC Support.
Add an EDR notify handler to attempt recovery.
[1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019,
affecting PCI Firmware Specification, Rev. 3.2
https://members.pcisig.com/wg/PCI-SIG/document/12888
[bhelgaas: squash add/enable patches into one]
Link: https://lore.kernel.org/r/90f91fe6d25c13f9d2255d2ce97ca15be307e1bb.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
If firmware controls DPC, it is generally responsible for managing the DPC
capability and events, and the OS should not access the DPC capability.
However, if firmware controls DPC and both the OS and the platform support
Error Disconnect Recover (EDR) notifications, the OS EDR notify handler is
responsible for recovery, and the notify handler may read/write the DPC
capability until it clears the DPC Trigger Status bit. See [1], sec 4.5.1,
table 4-6.
Expose some DPC error handling functions so they can be used by the EDR
notify handler.
[1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019,
affecting PCI Firmware Specification, Rev. 3.2
https://members.pcisig.com/wg/PCI-SIG/document/12888
Link: https://lore.kernel.org/r/e9000bb15b3a4293e81d98bb29ead7c84a6393c9.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Per the SFI _OSC and DPC Updates ECN [1] implementation note flowchart, the
OS seems to be expected to clear AER status even if it doesn't have
ownership of the AER capability. Unlike the DPC capability, where a DPC
ECN [2] specifies a window when the OS is allowed to access DPC registers
even if it doesn't have ownership, there is no clear model for AER.
Add pci_aer_raw_clear_status() to clear the AER error status registers
unconditionally. This is intended for use only by the EDR path (see [2]).
[1] System Firmware Intermediary (SFI) _OSC and DPC Updates ECN, Feb 24,
2020, affecting PCI Firmware Specification, Rev. 3.2
https://members.pcisig.com/wg/PCI-SIG/document/14076
[2] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019,
affecting PCI Firmware Specification, Rev. 3.2
https://members.pcisig.com/wg/PCI-SIG/document/12888
[bhelgaas: changelog]
Link: https://lore.kernel.org/r/c19ad28f3633cce67448609e89a75635da0da07d.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
As per the DPC Enhancements ECN [1], sec 4.5.1, table 4-4, if the OS
supports Error Disconnect Recover (EDR), it must invalidate the software
state associated with child devices of the port without attempting to
access the child device hardware. In addition, if the OS supports DPC, it
must attempt to recover the child devices if the port implements the DPC
Capability. If the OS continues operation, the OS must inform the firmware
of the status of the recovery operation via the _OST method.
Return the result of pcie_do_recovery() so we can report it to firmware via
_OST.
[1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019,
affecting PCI Firmware Specification, Rev. 3.2
https://members.pcisig.com/wg/PCI-SIG/document/12888
Link: https://lore.kernel.org/r/eb60ec89448769349c6722954ffbf2de163155b5.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Previously we passed the PCIe service type parameter to pcie_do_recovery(),
where reset_link() looked up the underlying pci_port_service_driver and its
.reset_link() function pointer. Instead of using this roundabout way, we
can just pass the driver-specific .reset_link() callback function when
calling pcie_do_recovery() function.
This allows us to call pcie_do_recovery() from code that is not a PCIe port
service driver, e.g., Error Disconnect Recover (EDR) support.
Remove pcie_port_find_service() and pcie_port_service_driver.reset_link
since they are now unused.
Link: https://lore.kernel.org/r/60e02b87b526cdf2930400059d98704bf0a147d1.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Commit bdb5ac8577 ("PCI/ERR: Handle fatal error recovery") uses
reset_link() to recover from fatal errors. But during fatal error
recovery, if the initial value of error status is PCI_ERS_RESULT_DISCONNECT
or PCI_ERS_RESULT_NO_AER_DRIVER then even after successful recovery (using
reset_link()) pcie_do_recovery() will report the recovery result as
failure. Update the status of error after reset_link().
You can reproduce this issue by triggering a SW DPC using "DPC Software
Trigger" bit in "DPC Control Register". You should see recovery failed
dmesg log as below:
pcieport 0000:00:16.0: DPC: containment event, status:0x1f27 source:0x0000
pcieport 0000:00:16.0: DPC: software trigger detected
pci 0000:04:00.0: AER: can't recover (no error_detected callback)
pcieport 0000:00:16.0: AER: device recovery failed
Fixes: bdb5ac8577 ("PCI/ERR: Handle fatal error recovery")
Link: https://lore.kernel.org/r/a255fcb3a3fdebcd90f84e08b555f1786eb8eba2.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com
[bhelgaas: split pci_channel_io_frozen simplification to separate patch]
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Keith Busch <keith.busch@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
-----BEGIN PGP SIGNATURE-----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=tcy+
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Define to_pci_sysdata() always to fix build breakage when !CONFIG_PCI
(Jason A. Donenfeld)
- Use PF PASID for VFs to fix VF IOMMU bind failures (Kuppuswamy
Sathyanarayanan)
* tag 'pci-v5.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/ATS: Use PF PASID for VFs
x86/PCI: Define to_pci_sysdata() even when !CONFIG_PCI
Per PCIe r5.0, sec 9.3.7.14, if a PF implements the PASID Capability, the
PF PASID configuration is shared by its VFs, and VFs must not implement
their own PASID Capability. But commit 751035b8dc ("PCI/ATS: Cache PASID
Capability offset") changed pci_max_pasids() and pci_pasid_features() to
use the PASID Capability of the VF device instead of the associated PF
device. This leads to IOMMU bind failures when pci_max_pasids() and
pci_pasid_features() are called for VFs.
In pci_max_pasids() and pci_pasid_features(), always use the PF PASID
Capability.
Fixes: 751035b8dc ("PCI/ATS: Cache PASID Capability offset")
Link: https://lore.kernel.org/r/fe891f9755cb18349389609e7fed9940fc5b081a.1580325170.git.sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v5.5+
Including:
- Allow to compile the ARM-SMMU drivers as modules.
- Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code
collected by Will Deacon. The merge-commit (6855d1ba75) has all the
details.
- Cleanup of the iommu_put_resv_regions() call-backs in various drivers.
- AMD IOMMU driver cleanups.
- Update for the x2APIC support in the AMD IOMMU driver.
- Preparation patches for Intel VT-d nested mode support.
- RMRR and identity domain handling fixes for the Intel VT-d driver.
- More small fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAl46yTsACgkQK/BELZcB
GuPldg//bHDyntUWHta11oHFnUh759mveFFsfYto/2dV7hyHOM1lgv2+ZaXdOYxE
03f9d9K9b4F3amF8wkluu9Z1Lve40JpZwD3WKTTg8sImh0z61nWoJ7+uE8ZjNzmA
/6pNqIPJ4w8n5Wz2yycTR7GeUekM0X5nvF0IBlVcX3UYFG0DDlL/eldLVSk43Wmw
P9C2dFwQLHBKhqhquqnXP1Z7YRfG9lX2ONAoMHSj3x2fm7UySSkrioBR0VrI6+sH
8/LFL+NgqQEZBTK0I8tZRwNuDUoHQ396PAdYEiXFFzWBLrEaadAuoh4WeLnLzlRe
G601on9ScUg1xy4lQHQiZDNKYqeB7gETMW/V2Q5nCaTrq2i1D5M6IwiNvOiV6crj
ZtFBqejng1BXfqLOxutHYyjNQBB/KxmWR3zT2p/spcAgxhUAJxS5GkbGm5G3OucN
2xWSnV+Dyu5jei8Ua5/onCdcuvCFi41xa9aCRrTSymIZ2W6aCNjm2mrctyRr1xmA
AwHBZ0/dx/v3vZA8GnkBrrvAYVsTWiMbHD/2sChDjnwedO0o0pMooHEjywmDgMON
/qXQjqR7pDpyxDA0US+30WfA3tkUcpLskza0ugWKtr/8RcHffrt5s9L0PpklgmtN
ILC2/zNB43mIFw8uGJdDVFw4aYuCAqIFFHkqQ5+hOBGn/ePHawc=
=HMIT
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Allow compiling the ARM-SMMU drivers as modules.
- Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code
collected by Will Deacon. The merge-commit (6855d1ba75) has all the
details.
- Cleanup of the iommu_put_resv_regions() call-backs in various
drivers.
- AMD IOMMU driver cleanups.
- Update for the x2APIC support in the AMD IOMMU driver.
- Preparation patches for Intel VT-d nested mode support.
- RMRR and identity domain handling fixes for the Intel VT-d driver.
- More small fixes and cleanups.
* tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits)
iommu/amd: Remove the unnecessary assignment
iommu/vt-d: Remove unnecessary WARN_ON_ONCE()
iommu/vt-d: Unnecessary to handle default identity domain
iommu/vt-d: Allow devices with RMRRs to use identity domain
iommu/vt-d: Add RMRR base and end addresses sanity check
iommu/vt-d: Mark firmware tainted if RMRR fails sanity check
iommu/amd: Remove unused struct member
iommu/amd: Replace two consecutive readl calls with one readq
iommu/vt-d: Don't reject Host Bridge due to scope mismatch
PCI/ATS: Add PASID stubs
iommu/arm-smmu-v3: Return -EBUSY when trying to re-add a device
iommu/arm-smmu-v3: Improve add_device() error handling
iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE
iommu/arm-smmu-v3: Add second level of context descriptor table
iommu/arm-smmu-v3: Prepare for handling arm_smmu_write_ctx_desc() failure
iommu/arm-smmu-v3: Propagate ssid_bits
iommu/arm-smmu-v3: Add support for Substream IDs
iommu/arm-smmu-v3: Add context descriptor tables allocators
iommu/arm-smmu-v3: Prepare arm_smmu_s1_cfg for SSID support
ACPI/IORT: Parse SSID property of named component node
...
- Implement user_access_begin() and friends for our platforms that support
controlling kernel access to userspace.
- Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx.
- Some tweaks to our pseries IOMMU code to allow SVMs ("secure" virtual
machines) to use the IOMMU.
- Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit VDSO, and
some other improvements.
- A series to use the PCI hotplug framework to control opencapi card's so that
they can be reset and re-read after flashing a new FPGA image.
As well as other minor fixes and improvements as usual.
Thanks to:
Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy, Andrew Donnellan,
Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen Zhou, Christophe Leroy,
Frederic Barrat, Greg Kurz, Jason A. Donenfeld, Joel Stanley, Jordan Niethe,
Julia Lawall, Krzysztof Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus
Walleij, Michael Bringmann, Nathan Chancellor, Nicholas Piggin, Nick
Desaulniers, Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy
Dunlap, Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn
Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago Jung
Bauermann, Tyrel Datwyler, Vaibhav Jain.
-----BEGIN PGP SIGNATURE-----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=xpG+
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"A pretty small batch for us, and apologies for it being a bit late, I
wanted to sneak Christophe's user_access_begin() series in.
Summary:
- Implement user_access_begin() and friends for our platforms that
support controlling kernel access to userspace.
- Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx.
- Some tweaks to our pseries IOMMU code to allow SVMs ("secure"
virtual machines) to use the IOMMU.
- Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit
VDSO, and some other improvements.
- A series to use the PCI hotplug framework to control opencapi
card's so that they can be reset and re-read after flashing a new
FPGA image.
As well as other minor fixes and improvements as usual.
Thanks to: Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy,
Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen
Zhou, Christophe Leroy, Frederic Barrat, Greg Kurz, Jason A.
Donenfeld, Joel Stanley, Jordan Niethe, Julia Lawall, Krzysztof
Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus Walleij, Michael
Bringmann, Nathan Chancellor, Nicholas Piggin, Nick Desaulniers,
Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy Dunlap,
Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn
Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago
Jung Bauermann, Tyrel Datwyler, Vaibhav Jain"
* tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (131 commits)
powerpc: configs: Cleanup old Kconfig options
powerpc/configs/skiroot: Enable some more hardening options
powerpc/configs/skiroot: Disable xmon default & enable reboot on panic
powerpc/configs/skiroot: Enable security features
powerpc/configs/skiroot: Update for symbol movement only
powerpc/configs/skiroot: Drop default n CONFIG_CRYPTO_ECHAINIV
powerpc/configs/skiroot: Drop HID_LOGITECH
powerpc/configs: Drop NET_VENDOR_HP which moved to staging
powerpc/configs: NET_CADENCE became NET_VENDOR_CADENCE
powerpc/configs: Drop CONFIG_QLGE which moved to staging
powerpc: Do not consider weak unresolved symbol relocations as bad
powerpc/32s: Fix kasan_early_hash_table() for CONFIG_VMAP_STACK
powerpc: indent to improve Kconfig readability
powerpc: Provide initial documentation for PAPR hcalls
powerpc: Implement user_access_save() and user_access_restore()
powerpc: Implement user_access_begin and friends
powerpc/32s: Prepare prevent_user_access() for user_access_end()
powerpc/32s: Drop NULL addr verification
powerpc/kuap: Fix set direction in allow/prevent_user_access()
powerpc/32s: Fix bad_kuap_fault()
...
- Remove unused modular code from uniphier, which cannot be built as a
module (Masahiro Yamada)
* remotes/lorenzo/pci/uniphier:
PCI: uniphier: remove module code from built-in driver
- Add DT clock/reset info for SDM845 PCIe controller (Bjorn Andersson)
- Add support for SDM845 PCIe controller to the qcom driver (Bjorn
Andersson)
* remotes/lorenzo/pci/qcom:
PCI: qcom: Add support for SDM845 PCIe controller
dt-bindings: PCI: qcom: Add support for SDM845 PCIe
- Fix link training so we can do it more than once (Yurii Monakov)
- Fix keystone outbound window mapping (Yurii Monakov)
- Fix error handling when DT lacks "num-viewport" (Kishon Vijay Abraham I)
* remotes/lorenzo/pci/keystone:
PCI: keystone: Fix error handling when "num-viewport" DT property is not populated
PCI: keystone: Fix outbound region mapping
PCI: keystone: Fix link training retries initiation
- Fix memory leak in pci_iov_add_virtfn() (Navid Emamdoost)
- Extend pci_add_dma_alias() so it can add a range of aliases (James
Sewart)
- Add DMA aliases for PLX PEX NTB (James Sewart)
* pci/virtualization:
PCI: Add DMA alias quirk for PLX PEX NTB
PCI: Add nr_devfns parameter to pci_add_dma_alias()
PCI: Fix pci_add_dma_alias() bitmask size
PCI/IOV: Fix memory leak in pci_iov_add_virtfn()
- Support 64-bit addressing for both streaming and coherent DMA (Wesley
Sheng)
- Read vep_vector_number with 16-bit, not 32-bit read (Logan Gunthorpe)
- Add Intercomm Notify and Upstream Error Containment support (Logan
Gunthorpe)
- Remove redundant valid PFF number count (Wesley Sheng)
- Avoid unnecessary CSR read in ISR (Wesley Sheng)
- Rename Gen3-specific constants (Logan Gunthorpe)
- Rework infrastructure to support Gen3- and Gen4-specific code (Logan
Gunthorpe)
- Add Gen4 system info register support (Logan Gunthorpe)
- Add Gen4 flash information interface support (Kelvin Cao)
- Add Gen4 MRPC GAS access permission check (Kelvin Cao)
* pci/switchtec:
PCI/switchtec: Add Gen4 device IDs
PCI/switchtec: Add Gen4 MRPC GAS access permission check
PCI/switchtec: Add Gen4 flash information interface support
PCI/switchtec: Add Gen4 system info register support
PCI/switchtec: Separate Gen3 register structures into unions
PCI/switchtec: Factor out Gen3 ioctl_flash_part_info()
PCI/switchtec: Add 'generation' variable
PCI/switchtec: Rename generation-specific constants
PCI/switchtec: Move check event ID from mask_event() to switchtec_event_isr()
PCI/switchtec: Remove redundant valid PFF number count
PCI/switchtec: Add support for Intercomm Notify and Upstream Error Containment
PCI/switchtec: Fix vep_vector_number ioread width
PCI/switchtec: Use dma_set_mask_and_coherent()
- Clear only bridge windows (not BARs) while assigning bus resources
(Logan Gunthorpe)
- Improve resource assignment for deep hotplug hierarchies, e.g.,
Thunderbolt (Nicholas Johnson)
* pci/resource:
PCI: Allow adjust_bridge_window() to shrink resource if necessary
PCI: Set resource size directly in adjust_bridge_window()
PCI: Rename extend_bridge_window() to adjust_bridge_window()
PCI: Rename extend_bridge_window() parameter
PCI: Consider alignment of hot-added bridges when assigning resources
PCI: Remove local variable usage in pci_bus_distribute_available_resources()
PCI: Pass size + alignment to pci_bus_distribute_available_resources()
PCI: Rename variables
PCI: Remove unnecessary braces
PCI: Don't disable bridge BARs when assigning bus resources
- Add Intel SkyLake-E to the whitelist of host bridges that support
peer-to-peer DMA (Armen Baloyan)
* pci/p2pdma:
PCI/P2PDMA: Add Intel SkyLake-E to the whitelist
- Fix Broadcom iProc quirk so it's applied regardless of whether the
iproc driver is built-in or a module (Wei Liu)
- Add extra delay when resuming AMD Ryzen5/7 XHCI controllers from D3hot
so they work after resume from runtime suspend or suspend-to-idle
(Daniel Drake)
- Fix pci_alloc_irq_vectors() function name typo in docs (Zenghui Yu)
* pci/misc:
Documentation: PCI: Fix pci_alloc_irq_vectors() function name typo
PCI: Increase D3 delay for AMD Ryzen5/7 XHCI controllers
PCI: Add generic quirk for increasing D3hot delay
PCI: iproc: Apply quirk_paxc_bridge() for module as well as built-in
Remove checks for resource size in adjust_bridge_window(). This is
necessary to allow pci_bus_distribute_available_resources() to function
when the kernel parameter "pci=hpmemsize=nn[KMG]" is used to allocate
resources. Because the kernel parameter sets the size of all hotplug
bridges to be the same, there are problems when nested hotplug bridges are
encountered. Fitting a downstream hotplug bridge with size X and normal
bridges with non-zero size Y into parent hotplug bridge with size X is
impossible, and hence the downstream hotplug bridge needs to shrink to fit
into its parent.
Add check for if bridge is extended or shrunken and reflect that in the
call to pci_dbg().
Reset the resource if its new size is zero (if we have run out of a bridge
window resource) to prevent the PCI resource assignment code from
attempting to assign a zero-sized resource.
Link: https://lore.kernel.org/r/PSXP216MB0438D3E2CFE64EBAA32AF691803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM
Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Change adjust_bridge_window() to set resource size directly instead of
using additional resource lists.
Because additional resource lists are optional resources, any algorithm
that requires guaranteed allocation that uses them cannot be guaranteed to
work.
Remove the resource from add_list, as a zero-sized additional resource is
redundant.
Update comment in pci_bus_distribute_available_resources() to reflect the
above changes.
Link: https://lore.kernel.org/r/PSXP216MB04386BA48874B56BC5CB0292803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM
Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Rename extend_bridge_window() to adjust_bridge_window() to prepare for the
fact that the window will be able to shrink. No functional change
intended.
Link: https://lore.kernel.org/r/PSXP216MB0438C47B3473D0C9DE531F18803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM
Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In extend_bridge_window(), change "available" parameter name to "new_size".
This makes more sense as this parameter represents the new size for the
window. No functional change intended.
Link: https://lore.kernel.org/r/PSXP216MB043853617ECA4118C472A417803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM
Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Change pci_bus_distribute_available_resources() to better handle bridges
with different resource alignment requirements.
The arguments io, mmio and mmio_pref represent the start and end
addresses of resource, into which we must fit the current bridge window.
The steps taken by pci_bus_distribute_available_resources():
- For io, mmio and mmio_pref, increase .start to align with the alignment
of the current bridge window (otherwise the current bridge window may
not fit within the available range).
- For io, mmio and mmio_pref, adjust the current bridge window to the
size after the above.
- Count the number of hotplug bridges and normal bridges on this bus.
- If the total number of bridges is one, give that bridge all of the
resources and return.
- If there are no hotplug bridges, return.
- For io, mmio and mmio_pref, increase .start by the amount required for
each bridge resource on the bus for non hotplug bridges, giving extra
room to make up for alignment of those resources.
- For io, mmio and mmio_pref, calculate the resource size per hotplug
bridge which is available after the previous steps.
- For io, mmio and mmio_pref, distribute the resources to each hotplug
bridge, with the sizes calculated above.
The motivation for fixing this is enabling devices that require greater
than 1MB alignment. This fixes the case where the user hot-adds devices
with BAR alignment >1MB and Linux fails to assign resources to it.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199581
Link: https://lore.kernel.org/r/PSXP216MB0438C2BFD0FD3691ED9C83F4803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In pci_bus_distribute_available_resources(), use resource_size() rather
than the local available_io, etc. No functional change intended; this just
makes the preceding patch smaller.
[bhelgaas: extracted from https://lore.kernel.org/r/PSXP216MB0438587C47CBEDF365B1EA27803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM]
Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Change pci_bus_distribute_available_resources() arguments from
resource_size_t to struct resource to add more information required to get
the alignment correct for bridge windows with alignment >1M.
We require (size, alignment), instead of just (size) which is what is
currently available. The change from resource_size_t to struct resource
does just that.
Note that the struct resource arguments are passed by value and not by
reference. We do not want to pass by reference and change the resource size
of the parent bridge window. We only want the size information.
No functional change intended.
Link: https://lore.kernel.org/r/PSXP216MB0438587C47CBEDF365B1EA27803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM
[bhelgaas: split parts to other patches to reduce the size of this one]
Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In pci_bus_distribute_available_resources(), rename:
io => io_per_hp
mmio => mmio_per_hp
mmio_pref => mmio_pref_per_hp
No functional change; this is just to make a subsequent patch smaller.
[bhelgaas: extracted from https://lore.kernel.org/r/PSXP216MB0438587C47CBEDF365B1EA27803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM]
Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Add new VMD device IDs that require the bus restriction mode.
Signed-off-by: Sushma Kalakota <sushmax.kalakota@intel.com>
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This adds MSI support to the Broadcom STB PCIe host controller. The MSI
controller is physically located within the PCIe block, however, there
is no reason why the MSI controller could not be moved elsewhere in the
future. MSIX is not supported by the HW.
Since the internal Brcmstb MSI controller is intertwined with the PCIe
controller, it is not its own platform device but rather part of the
PCIe platform device.
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
This adds a basic driver for Broadcom's STB PCIe controller, for now
aimed at Raspberry Pi 4's SoC, bcm2711.
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
[lorenzo.pieralisi@arm.com: updated brcm_pcie_get_rc_bar2_size_and_offset()according to https://lore.kernel.org/linux-pci/be8ddb33a7360af1815cf686f77f3f0913d02be3.camel@suse.de]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
- remove ioremap_nocache given that is is equivalent to
ioremap everywhere
-----BEGIN PGP SIGNATURE-----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=TUCJ
-----END PGP SIGNATURE-----
Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap
Pull ioremap updates from Christoph Hellwig:
"Remove the ioremap_nocache API (plus wrappers) that are always
identical to ioremap"
* tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap:
remove ioremap_nocache and devm_ioremap_nocache
MIPS: define ioremap_nocache to ioremap
Devices on the VMD domain use the VMD endpoint's requester ID and have been
relying on the VMD endpoint's DMA operations. The problem with this was
that VMD domain devices would use the VMD endpoint's attributes when doing
DMA and IOMMU mapping. We can be smarter about this by only using the VMD
endpoint when mapping and providing the correct child device's attributes
during DMA operations.
Remove the dma_map_ops redirect.
Link: https://lore.kernel.org/r/1579613871-301529-7-git-send-email-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
The current DMA alias implementation requires the aliased device be on the
same PCI bus as the requester ID. Add an arch-specific mechanism to point
to another PCI device when doing mapping and PCI DMA alias search. The
default case returns the actual device.
Link: https://lore.kernel.org/r/1579613871-301529-4-git-send-email-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Expose VMD's pci_dev pointer in struct pci_sysdata. This will be used
indirectly by intel-iommu.c to find the correct domain.
Link: https://lore.kernel.org/r/1579613871-301529-3-git-send-email-jonathan.derrick@intel.com
[bhelgaas: commit log]
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Previously we did not call INIT_KFIFO() for aer_fifo. This leads to
kfifo_put() sometimes returning 0 (queue full) when in fact it is not.
It is easy to reproduce the problem by using aer-inject:
$ aer-inject -s :82:00.0 multiple-corr-nonfatal
The content of the multiple-corr-nonfatal file is as below:
AER
COR RCVR
HL 0 1 2 3
AER
UNCOR POISON_TLP
HL 4 5 6 7
Fixes: 27c1ce8bbe ("PCI/AER: Use kfifo for tracking events instead of reimplementing it")
Link: https://lore.kernel.org/r/1579767991-103898-1-git-send-email-liudongdong3@huawei.com
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Define dev_fmt() with the common prefix of log messages so we don't have to
repeat it in every printk. No functional change intended.
Link: https://lore.kernel.org/r/20191213225709.GA213811@google.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
PCI error recovery will fail if any device under the Root Port doesn't have
an error_detected callback. Currently only the failure result is printed,
which is not enough to identify the driver that lacks the callback.
Log a message to identify the device with no error_detected callback.
[bhelgaas: tweak log message]
Link: https://lore.kernel.org/r/1576237474-32021-1-git-send-email-yangyicong@hisilicon.com
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
An opencapi slot doesn't have an associated bridge device. It's not
needed for operation, but any warning is displayed through pci_warn()
which uses the pci_dev struct of the assocated bridge device. So wrap
those warning so that a different trace mechanism can be used if it's
an opencapi slot.
Reviewed-by: Alastair D'Silva <alastair@d-silva.org>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191121134918.7155-11-fbarrat@linux.ibm.com
Kuppuswamy Sathyanarayanan