The idea behind it is simple:
1) for none scheduler, driver tag has to be borrowed for flush rq,
otherwise we may run out of tag, and that causes an IO hang. And
get/put driver tag is actually noop for none, so reordering tags
isn't necessary at all.
2) for a real I/O scheduler, we need not allocate a driver tag upfront
for flush rq. It works just fine to follow the same approach as
normal requests: allocate driver tag for each rq just before calling
->queue_rq().
One driver visible change is that the driver tag isn't shared in the
flush request sequence. That won't be a problem, since we always do that
in legacy path.
Then flush rq need not be treated specially wrt. get/put driver tag.
This cleans up the code - for instance, reorder_tags_to_front() can be
removed, and we needn't worry about request ordering in dispatch list
for avoiding I/O deadlock.
Also we have to put the driver tag before requeueing.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the following patch, we will use RQF_FLUSH_SEQ to decide:
1) if the flag isn't set, the flush rq need to be inserted via
blk_insert_flush()
2) otherwise, the flush rq need to be dispatched directly since
it is in flush machinery now.
So we use blk_mq_request_bypass_insert() for requests of bypassing
flush machinery, just like the legacy path did.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_insert_flush() should only insert request since run queue always
follows it.
In case of bypassing flush, we don't need to run queue because every
blk_insert_flush() follows one run queue.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Normally I wouldn't bother with this, but in my opinion the comments are
the most important part of this whole file since without them no one
would have any clue how this insanity works.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).
For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.
Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of documenting the locking assumptions of most block layer
functions as a comment, use lockdep_assert_held() to verify locking
assumptions at runtime.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently we use nornal Linux errno values in the block layer, and while
we accept any error a few have overloaded magic meanings. This patch
instead introduces a new blk_status_t value that holds block layer specific
status codes and explicitly explains their meaning. Helpers to convert from
and to the previous special meanings are provided for now, but I suspect
we want to get rid of them in the long run - those drivers that have a
errno input (e.g. networking) usually get errnos that don't know about
the special block layer overloads, and similarly returning them to userspace
will usually return somethings that strictly speaking isn't correct
for file system operations, but that's left as an exercise for later.
For now the set of errors is a very limited set that closely corresponds
to the previous overloaded errno values, but there is some low hanging
fruite to improve it.
blk_status_t (ab)uses the sparse __bitwise annotations to allow for sparse
typechecking, so that we can easily catch places passing the wrong values.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
blk_insert_flush should be using __blk_end_request to start with.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
blkdev_issue_flush() is now always synchronous, and it no longer has a
flags argument. So remove the part of the comment about the WAIT flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
For blk-mq with scheduling, we can potentially end up with ALL
driver tags assigned and sitting on the flush queues. If we
defer because of an inlfight data request, then we can deadlock
if that data request doesn't already have a tag assigned.
This fixes a deadlock with running the xfs/297 xfstest, where
thousands of syncs can cause the drive queue to stall.
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Instead of keeping two levels of indirection for requests types, fold it
all into the operations. The little caveat here is that previously
cmd_type only applied to struct request, while the request and bio op
fields were set to plain REQ_OP_READ/WRITE even for passthrough
operations.
Instead this patch adds new REQ_OP_* for SCSI passthrough and driver
private requests, althought it has to add two for each so that we
can communicate the data in/out nature of the request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This mirrors the blk-mq capabilities to allocate extra drivers-specific
data behind struct request by setting a cmd_size field, as well as having
a constructor / destructor for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Instead of letting the caller check this and handle the details
of inserting a flush request, put the logic in the scheduler
insertion function. This fixes direct flush insertion outside
of the usual make_request_fn calls, like from dm via
blk_insert_cloned_request().
Signed-off-by: Jens Axboe <axboe@fb.com>
This adds a set of hooks that intercepts the blk-mq path of
allocating/inserting/issuing/completing requests, allowing
us to develop a scheduler within that framework.
We reuse the existing elevator scheduler API on the registration
side, but augment that with the scheduler flagging support for
the blk-mq interfce, and with a separate set of ops hooks for MQ
devices.
We split driver and scheduler tags, so we can run the scheduling
independently of device queue depth.
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Pull block layer updates from Jens Axboe:
"This is the main block pull request this series. Contrary to previous
release, I've kept the core and driver changes in the same branch. We
always ended up having dependencies between the two for obvious
reasons, so makes more sense to keep them together. That said, I'll
probably try and keep more topical branches going forward, especially
for cycles that end up being as busy as this one.
The major parts of this pull request is:
- Improved support for O_DIRECT on block devices, with a small
private implementation instead of using the pig that is
fs/direct-io.c. From Christoph.
- Request completion tracking in a scalable fashion. This is utilized
by two components in this pull, the new hybrid polling and the
writeback queue throttling code.
- Improved support for polling with O_DIRECT, adding a hybrid mode
that combines pure polling with an initial sleep. From me.
- Support for automatic throttling of writeback queues on the block
side. This uses feedback from the device completion latencies to
scale the queue on the block side up or down. From me.
- Support from SMR drives in the block layer and for SD. From Hannes
and Shaun.
- Multi-connection support for nbd. From Josef.
- Cleanup of request and bio flags, so we have a clear split between
which are bio (or rq) private, and which ones are shared. From
Christoph.
- A set of patches from Bart, that improve how we handle queue
stopping and starting in blk-mq.
- Support for WRITE_ZEROES from Chaitanya.
- Lightnvm updates from Javier/Matias.
- Supoort for FC for the nvme-over-fabrics code. From James Smart.
- A bunch of fixes from a whole slew of people, too many to name
here"
* 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits)
blk-stat: fix a few cases of missing batch flushing
blk-flush: run the queue when inserting blk-mq flush
elevator: make the rqhash helpers exported
blk-mq: abstract out blk_mq_dispatch_rq_list() helper
blk-mq: add blk_mq_start_stopped_hw_queue()
block: improve handling of the magic discard payload
blk-wbt: don't throttle discard or write zeroes
nbd: use dev_err_ratelimited in io path
nbd: reset the setup task for NBD_CLEAR_SOCK
nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME
nvme-fabrics: Add target support for FC transport
nvme-fabrics: Add host support for FC transport
nvme-fabrics: Add FC transport LLDD api definitions
nvme-fabrics: Add FC transport FC-NVME definitions
nvme-fabrics: Add FC transport error codes to nvme.h
Add type 0x28 NVME type code to scsi fc headers
nvme-fabrics: patch target code in prep for FC transport support
nvme-fabrics: set sqe.command_id in core not transports
parser: add u64 number parser
nvme-rdma: align to generic ib_event logging helper
...
Currently we pass in to run the queue async, but don't flag the
queue to be run. We don't need to run it async here, but we should
run it. So fixup the parameters.
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
If we insert a flush request, we clear REQ_PREFLUSH and/or REQ_FUA,
depending on flush settings. Since op_is_sync() factors those flags
in for deciding whether this request is sync or not, we should
set REQ_SYNC to avoid screwing up this accounting.
This should be less fragile.
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Fixes: b685d3d65a ("block: treat REQ_FUA and REQ_PREFLUSH as synchronous")
Signed-off-by: Jens Axboe <axboe@fb.com>
Most blk_mq_requeue_request() and blk_mq_add_to_requeue_list() calls
are followed by kicking the requeue list. Hence add an argument to
these two functions that allows to kick the requeue list. This was
proposed by Christoph Hellwig.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Remove the WRITE_* and READ_SYNC wrappers, and just use the flags
directly. Where applicable this also drops usage of the
bio_set_op_attrs wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that we don't need the common flags to overflow outside the range
of a 32-bit type we can encode them the same way for both the bio and
request fields. This in addition allows us to place the operation
first (and make some room for more ops while we're at it) and to
stop having to shift around the operation values.
In addition this allows passing around only one value in the block layer
instead of two (and eventuall also in the file systems, but we can do
that later) and thus clean up a lot of code.
Last but not least this allows decreasing the size of the cmd_flags
field in struct request to 32-bits. Various functions passing this
value could also be updated, but I'd like to avoid the churn for now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
A lot of the REQ_* flags are only used on struct requests, and only of
use to the block layer and a few drivers that dig into struct request
internals.
This patch adds a new req_flags_t rq_flags field to struct request for
them, and thus dramatically shrinks the number of common requests. It
also removes the unfortunate situation where we have to fit the fields
from the same enum into 32 bits for struct bio and 64 bits for
struct request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch fixes one issue reported by Kent, which can
be triggered in bcachefs over sata disk. Actually it
is a generic issue in block flush vs. blk-tag.
Cc: Christoph Hellwig <hch@infradead.org>
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
All drivers use the default, so provide an inline version of it. If we
ever need other queue mapping we can add an optional method back,
although supporting will also require major changes to the queue setup
code.
This provides better code generation, and better debugability as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
To avoid confusion between REQ_OP_FLUSH, which is handled by
request_fn drivers, and upper layers requesting the block layer
perform a flush sequence along with possibly a WRITE, this patch
renames REQ_FLUSH to REQ_PREFLUSH.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This adds a REQ_OP_FLUSH operation that is sent to request_fn
based drivers by the block layer's flush code, instead of
sending requests with the request->cmd_flags REQ_FLUSH bit set.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch converts the simple bi_rw use cases in the block,
drivers, mm and fs code to set/get the bio operation using
bio_set_op_attrs/bio_op
These should be simple one or two liner cases, so I just did them
in one patch. The next patches handle the more complicated
cases in a module per patch.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw
instead of passing it in. This makes that use the same as
generic_make_request and how we set the other bio fields.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Fixed up fs/ext4/crypto.c
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that we converted everything to the newer block write cache
interface, kill off the queue flush_flags and queueable flush
entries.
Signed-off-by: Jens Axboe <axboe@fb.com>
This reverts commit 1b2ff19e6a.
Jan writes:
--
Thanks for report! After some investigation I found out we allocate
elevator specific data in __get_request() only for non-flush requests. And
this is actually required since the flush machinery uses the space in
struct request for something else. Doh. So my patch is just wrong and not
easy to fix since at the time __get_request() is called we are not sure
whether the flush machinery will be used in the end. Jens, please revert
1b2ff19e6a. Thanks!
I'm somewhat surprised that you can reliably hit the race where flushing
gets disabled for the device just while the request is in flight. But I
guess during boot it makes some sense.
--
So let's just revert it, we can fix the queue run manually after the
fact. This race is rare enough that it didn't trigger in testing, it
requires the specific disable-while-in-flight scenario to trigger.
Currently blk_insert_flush() just adds flush request to q->queue_head
when flush is not required. That completely bypasses IO scheduler so
e.g. CFQ can be idling waiting for new request to arrive and will idle
through the whole window unnecessarily. Luckily this only happens in
rare cases as usually checks in generic_make_request_checks() clear
FLUSH and FUA flags early if they are not needed.
When no flushing is actually required, we can easily fix the problem by
properly queueing the request through the IO scheduler. Ideally IO
scheduler should be also made aware of requests queued via
blk_flush_queue_rq(). However inserting flush request through IO
scheduler can have unwanted side-effects since due to flush batching
delaying the flush request in IO scheduler will delay all flush requests
possibly coming from other processes. So we keep adding the request
directly to q->queue_head.
Signed-off-by: Jan Kara <jack@suse.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch supports to run one single flush machinery for
each blk-mq dispatch queue, so that:
- current init_request and exit_request callbacks can
cover flush request too, then the buggy copying way of
initializing flush request's pdu can be fixed
- flushing performance gets improved in case of multi hw-queue
In fio sync write test over virtio-blk(4 hw queues, ioengine=sync,
iodepth=64, numjobs=4, bs=4K), it is observed that througput gets
increased a lot over my test environment:
- throughput: +70% in case of virtio-blk over null_blk
- throughput: +30% in case of virtio-blk over SSD image
The multi virtqueue feature isn't merged to QEMU yet, and patches for
the feature can be found in below tree:
git://kernel.ubuntu.com/ming/qemu.git v2.1.0-mq.4
And simply passing 'num_queues=4 vectors=5' should be enough to
enable multi queue(quad queue) feature for QEMU virtio-blk.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch adds 'blk_mq_ctx' parameter to blk_get_flush_queue(),
so that this function can find the corresponding blk_flush_queue
bound with current mq context since the flush queue will become
per hw-queue.
For legacy queue, the parameter can be simply 'NULL'.
For multiqueue case, the parameter should be set as the context
from which the related request is originated. With this context
info, the hw queue and related flush queue can be found easily.
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Just figuring out flush queue at the entry of kicking off flush
machinery and request's completion handler, then pass it through.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now mission of the two helpers is over, and just call
blk_alloc_flush_queue() and blk_free_flush_queue() directly.
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch introduces 'struct blk_flush_queue' and puts all
flush machinery related fields into this structure, so that
- flush implementation details aren't exposed to driver
- it is easy to convert to per dispatch-queue flush machinery
This patch is basically a mechanical replacement.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch trys to use local variable to access flush request,
so that we can convert to per-queue flush machinery a bit easier.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
These fields are always used with the flush request, so
initialize them together.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
These two temporary functions are introduced for holding flush
initialization and de-initialization, so that we can
introduce 'flush queue' easier in the following patch. And
once 'flush queue' and its allocation/free functions are ready,
they will be removed for sake of code readability.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
It is reasonable to allocate flush req in blk_mq_init_flush().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch removes two unnecessary blk_clear_rq_complete(),
the REQ_ATOM_COMPLETE flag is cleared inside blk_mq_start_request(),
so:
- The blk_clear_rq_complete() in blk_flush_restore_request()
needn't because the request will be freed later, and clearing
it here may open a small race window with timeout.
- The blk_clear_rq_complete() in blk_mq_requeue_request() isn't
necessary too, even though REQ_ATOM_STARTED is cleared in
__blk_mq_requeue_request(), in theory it still may cause a small
race window with timeout since the two clear_bit() may be
reordered.
Signed-off-by: Ming Lei <ming.lei@canoical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that we've changed the driver API on the submission side use the
opportunity to fix up the name on the completion side to fit into the
general scheme.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
elv_abort_queue has no callers, and blk_abort_flushes is only called by
elv_abort_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
blk_mq_tag_to_rq() needs to be able to tell if it should return
the original request, or the flush request if we are doing a flush
sequence. Clear the flush tag when IO completes for a flush, since
that is what we are comparing against.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
flush request is special, which borrows the tag from the parent
request. Hence blk_mq_tag_to_rq needs special handling to return
the flush request from the tag.
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Both the cache flush state machine and the SCSI midlayer want to submit
requests from irq context, and the current per-request requeue_work
unfortunately causes corruption due to sharing with the csd field for
flushes. Replace them with a per-request_queue list of requests to
be requeued.
Based on an earlier test by Ming Lei.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Ming Lei <tom.leiming@gmail.com>
Tested-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We will use this work_struct to requeue scsi commands from the
completion handler as well, so give it a more generic name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Drivers shouldn't have to care about the block layer setting aside a
request to implement the flush state machine. We already override the
mq context and tag to make it more transparent, but so far haven't deal
with the driver private data in the request. Make sure to override this
as well, and while we're at it add a proper helper sitting in blk-mq.c
that implements the full impersonation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Drivers can reach their private data easily using the blk_mq_rq_to_pdu
helper and don't need req->special. By not initializing it code can
be simplified nicely, and we also shave off a few more instructions from
the I/O path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Commit 18741986 inadvertently changed the rq flush insertion
from a head to a tail insertion. Fix that back up.
Signed-off-by: Mike Snitzer <msnitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
It's almost identical to blk_mq_insert_request, so fold the two into one
slightly more generic function by making the flush special case a bit
smarted.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Witch to using a preallocated flush_rq for blk-mq similar to what's done
with the old request path. This allows us to set up the request properly
with a tag from the actually allowed range and ->rq_disk as needed by
some drivers. To make life easier we also switch to dynamic allocation
of ->flush_rq for the old path.
This effectively reverts most of
"blk-mq: fix for flush deadlock"
and
"blk-mq: Don't reserve a tag for flush request"
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Reserving a tag (request) for flush to avoid dead lock is a overkill. A
tag is valuable resource. We can track the number of flush requests and
disallow having too many pending flush requests allocated. With this
patch, blk_mq_alloc_request_pinned() could do a busy nop (but not a dead
loop) if too many pending requests are allocated and new flush request
is allocated. But this should not be a problem, too many pending flush
requests are very rare case.
I verified this can fix the deadlock caused by too many pending flush
requests.
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It was being open coded in a few places.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Chris Mason <chris.mason@fusionio.com>
Acked-by: NeilBrown <neilb@suse.de>
The flush state machine takes in a struct request, which then is
submitted multiple times to the underling driver. The old block code
requeses the same request for each of those, so it does not have an
issue with tapping into the request pool. The new one on the other hand
allocates a new request for each of the actualy steps of the flush
sequence. If have already allocated all of the tags for IO, we will
fail allocating the flush request.
Set aside a reserved request just for flushes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Using wait_for_completion() for waiting for a IO request to be executed
results in wrong iowait time accounting. For example, a system having
the only task doing write() and fdatasync() on a block device can be
reported being idle instead of iowaiting as it should because
blkdev_issue_flush() calls wait_for_completion() which in turn calls
schedule() that does not increment the iowait proc counter and thus does
not turn on iowait time accounting.
The patch makes block layer use wait_for_completion_io() instead of
wait_for_completion() where appropriate to account iowait time
correctly.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A dm-multipath user reported[1] a problem when trying to boot
a kernel with commit 4853abaae7
(block: fix flush machinery for stacking drivers with differring
flush flags) applied. It turns out that an empty flush request
can be sent into blk_insert_flush. When the BUG_ON was fixed
to allow for this, I/O on the underlying device would stall. The
reason is that blk_insert_cloned_request does not kick the queue.
In the aforementioned commit, I had added a special case to
kick the queue if data was sent down but the queue flags did
not require a flush. A better solution is to push the queue
kick up into blk_insert_cloned_request.
This patch, along with a follow-on which fixes the BUG_ON, fixes
the issue reported.
[1] http://www.redhat.com/archives/dm-devel/2011-September/msg00154.html
Reported-by: Christophe Saout <christophe@saout.de>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Stable note: 3.1
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A user reported a regression due to commit
4853abaae7 (block: fix flush
machinery for stacking drivers with differring flush flags).
Part of the problem is that blk_insert_flush required a
single bio be attached to the request. In reality, having
no attached bio is also a valid case, as can be observed with
an empty flush.
[1] http://www.redhat.com/archives/dm-devel/2011-September/msg00154.html
Reported-by: Christophe Saout <christophe@saout.de>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com
Acked-by: Tejun Heo <tj@kernel.org>
Stable note: 3.1
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit ae1b153962, block: reimplement
FLUSH/FUA to support merge, introduced a performance regression when
running any sort of fsyncing workload using dm-multipath and certain
storage (in our case, an HP EVA). The test I ran was fs_mark, and it
dropped from ~800 files/sec on ext4 to ~100 files/sec. It turns out
that dm-multipath always advertised flush+fua support, and passed
commands on down the stack, where those flags used to get stripped off.
The above commit changed that behavior:
static inline struct request *__elv_next_request(struct request_queue *q)
{
struct request *rq;
while (1) {
- while (!list_empty(&q->queue_head)) {
+ if (!list_empty(&q->queue_head)) {
rq = list_entry_rq(q->queue_head.next);
- if (!(rq->cmd_flags & (REQ_FLUSH | REQ_FUA)) ||
- (rq->cmd_flags & REQ_FLUSH_SEQ))
- return rq;
- rq = blk_do_flush(q, rq);
- if (rq)
- return rq;
+ return rq;
}
Note that previously, a command would come in here, have
REQ_FLUSH|REQ_FUA set, and then get handed off to blk_do_flush:
struct request *blk_do_flush(struct request_queue *q, struct request *rq)
{
unsigned int fflags = q->flush_flags; /* may change, cache it */
bool has_flush = fflags & REQ_FLUSH, has_fua = fflags & REQ_FUA;
bool do_preflush = has_flush && (rq->cmd_flags & REQ_FLUSH);
bool do_postflush = has_flush && !has_fua && (rq->cmd_flags &
REQ_FUA);
unsigned skip = 0;
...
if (blk_rq_sectors(rq) && !do_preflush && !do_postflush) {
rq->cmd_flags &= ~REQ_FLUSH;
if (!has_fua)
rq->cmd_flags &= ~REQ_FUA;
return rq;
}
So, the flush machinery was bypassed in such cases (q->flush_flags == 0
&& rq->cmd_flags & (REQ_FLUSH|REQ_FUA)).
Now, however, we don't get into the flush machinery at all. Instead,
__elv_next_request just hands a request with flush and fua bits set to
the scsi_request_fn, even if the underlying request_queue does not
support flush or fua.
The agreed upon approach is to fix the flush machinery to allow
stacking. While this isn't used in practice (since there is only one
request-based dm target, and that target will now reflect the flush
flags of the underlying device), it does future-proof the solution, and
make it function as designed.
In order to make this work, I had to add a field to the struct request,
inside the flush structure (to store the original req->end_io). Shaohua
had suggested overloading the union with rb_node and completion_data,
but the completion data is used by device mapper and can also be used by
other drivers. So, I didn't see a way around the additional field.
I tested this patch on an HP EVA with both ext4 and xfs, and it recovers
the lost performance. Comments and other testers, as always, are
appreciated.
Cheers,
Jeff
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
blk_insert_flush has the following check:
/*
* If there's data but flush is not necessary, the request can be
* processed directly without going through flush machinery. Queue
* for normal execution.
*/
if ((policy & REQ_FSEQ_DATA) &&
!(policy & (REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH))) {
list_add_tail(&rq->queuelist, &q->queue_head);
return;
}
However, blk_flush_policy will not return with policy set to only
REQ_FSEQ_DATA:
static unsigned int blk_flush_policy(unsigned int fflags, struct request *rq)
{
unsigned int policy = 0;
if (fflags & REQ_FLUSH) {
if (rq->cmd_flags & REQ_FLUSH)
policy |= REQ_FSEQ_PREFLUSH;
if (blk_rq_sectors(rq))
policy |= REQ_FSEQ_DATA;
if (!(fflags & REQ_FUA) && (rq->cmd_flags & REQ_FUA))
policy |= REQ_FSEQ_POSTFLUSH;
}
return policy;
}
Notice that REQ_FSEQ_DATA is only set if REQ_FLUSH is set. Fix this
mismatch by moving the setting of REQ_FSEQ_DATA outside of the REQ_FLUSH
check.
Tejun notes:
Hmmm... yes, this can become a correctness issue if (and only if)
blk_queue_flush() is called to change q->flush_flags while requests
are in-flight; otherwise, requests wouldn't reach the function at all.
Also, I think it would be a generally good idea to always set
FSEQ_DATA if the request has data.
Cheers,
Jeff
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
In some drives, flush requests are non-queueable. When flush request is
running, normal read/write requests can't run. If block layer dispatches
such request, driver can't handle it and requeue it. Tejun suggested we
can hold the queue when flush is running. This can avoid unnecessary
requeue. Also this can improve performance. For example, we have
request flush1, write1, flush 2. flush1 is dispatched, then queue is
hold, write1 isn't inserted to queue. After flush1 is finished, flush2
will be dispatched. Since disk cache is already clean, flush2 will be
finished very soon, so looks like flush2 is folded to flush1.
In my test, the queue holding completely solves a regression introduced by
commit 53d63e6b0dfb95882ec0219ba6bbd50cde423794:
block: make the flush insertion use the tail of the dispatch list
It's not a preempt type request, in fact we have to insert it
behind requests that do specify INSERT_FRONT.
which causes about 20% regression running a sysbench fileio
workload.
Stable: 2.6.39 only
Cc: stable@kernel.org
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Instead of overloading __blk_run_queue to force an offload to kblockd
add a new blk_run_queue_async helper to do it explicitly. I've kept
the blk_queue_stopped check for now, but I suspect it's not needed
as the check we do when the workqueue items runs should be enough.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
It's not a preempt type request, in fact we have to insert it
behind requests that do specify INSERT_FRONT.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Merge it with __elv_add_request(), it's pretty pointless to
have a function with only two callers. The main interface
is elv_add_request()/__elv_add_request().
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This patch adds support for creating a queuing context outside
of the queue itself. This enables us to batch up pieces of IO
before grabbing the block device queue lock and submitting them to
the IO scheduler.
The context is created on the stack of the process and assigned in
the task structure, so that we can auto-unplug it if we hit a schedule
event.
The current queue plugging happens implicitly if IO is submitted to
an empty device, yet callers have to remember to unplug that IO when
they are going to wait for it. This is an ugly API and has caused bugs
in the past. Additionally, it requires hacks in the vm (->sync_page()
callback) to handle that logic. By switching to an explicit plugging
scheme we make the API a lot nicer and can get rid of the ->sync_page()
hack in the vm.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This merge creates two set of conflicts. One is simple context
conflicts caused by removal of throtl_scheduled_delayed_work() in
for-linus and removal of throtl_shutdown_timer_wq() in
for-2.6.39/core.
The other is caused by commit 255bb490c8 (block: blk-flush shouldn't
call directly into q->request_fn() __blk_run_queue()) in for-linus
crashing with FLUSH reimplementation in for-2.6.39/core. The conflict
isn't trivial but the resolution is straight-forward.
* __blk_run_queue() calls in flush_end_io() and flush_data_end_io()
should be called with @force_kblockd set to %true.
* elv_insert() in blk_kick_flush() should use
%ELEVATOR_INSERT_REQUEUE.
Both changes are to avoid invoking ->request_fn() directly from
request completion path and closely match the changes in the commit
255bb490c8.
Signed-off-by: Tejun Heo <tj@kernel.org>
blk-flush decomposes a flush into sequence of multiple requests. On
completion of a request, the next one is queued; however, block layer
must not implicitly call into q->request_fn() directly from completion
path. This makes the queue behave unexpectedly when seen from the
drivers and violates the assumption that q->request_fn() is called
with process context + queue_lock.
This patch makes blk-flush the following two changes to make sure
q->request_fn() is not called directly from request completion path.
- blk_flush_complete_seq_end_io() now asks __blk_run_queue() to always
use kblockd instead of calling directly into q->request_fn().
- queue_next_fseq() uses ELEVATOR_INSERT_REQUEUE instead of
ELEVATOR_INSERT_FRONT so that elv_insert() doesn't try to unplug the
request queue directly.
Reported by Jan in the following threads.
http://thread.gmane.org/gmane.linux.ide/48778http://thread.gmane.org/gmane.linux.ide/48786
stable: applicable to v2.6.37.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jan Beulich <JBeulich@novell.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
__blk_run_queue() automatically either calls q->request_fn() directly
or schedules kblockd depending on whether the function is recursed.
blk-flush implementation needs to be able to explicitly choose
kblockd. Add @force_kblockd.
All the current users are converted to specify %false for the
parameter and this patch doesn't introduce any behavior change.
stable: This is prerequisite for fixing ide oops caused by the new
blk-flush implementation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The current FLUSH/FUA support has evolved from the implementation
which had to perform queue draining. As such, sequencing is done
queue-wide one flush request after another. However, with the
draining requirement gone, there's no reason to keep the queue-wide
sequential approach.
This patch reimplements FLUSH/FUA support such that each FLUSH/FUA
request is sequenced individually. The actual FLUSH execution is
double buffered and whenever a request wants to execute one for either
PRE or POSTFLUSH, it queues on the pending queue. Once certain
conditions are met, a flush request is issued and on its completion
all pending requests proceed to the next sequence.
This allows arbitrary merging of different type of flushes. How they
are merged can be primarily controlled and tuned by adjusting the
above said 'conditions' used to determine when to issue the next
flush.
This is inspired by Darrick's patches to merge multiple zero-data
flushes which helps workloads with highly concurrent fsync requests.
* As flush requests are never put on the IO scheduler, request fields
used for flush share space with rq->rb_node. rq->completion_data is
moved out of the union. This increases the request size by one
pointer.
As rq->elevator_private* are used only by the iosched too, it is
possible to reduce the request size further. However, to do that,
we need to modify request allocation path such that iosched data is
not allocated for flush requests.
* FLUSH/FUA processing happens on insertion now instead of dispatch.
- Comments updated as per Vivek and Mike.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
rq == &q->flush_rq was used to determine whether a rq is part of a
flush sequence, which worked because all requests in a flush sequence
were sequenced using the single dedicated request. This is about to
change, so introduce REQ_FLUSH_SEQ flag to distinguish flush sequence
requests.
This patch doesn't cause any behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
All the blkdev_issue_* helpers can only sanely be used for synchronous
caller. To issue cache flushes or barriers asynchronously the caller needs
to set up a bio by itself with a completion callback to move the asynchronous
state machine ahead. So drop the BLKDEV_IFL_WAIT flag that is always
specified when calling blkdev_issue_* and also remove the now unused flags
argument to blkdev_issue_flush and blkdev_issue_zeroout. For
blkdev_issue_discard we need to keep it for the secure discard flag, which
gains a more descriptive name and loses the bitops vs flag confusion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Update blkdev_issue_flush() to use new REQ_FLUSH interface.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
rq->rq_disk and bio->bi_bdev->bd_disk may differ if a request has
passed through remapping drivers. FSEQ_DATA request incorrectly
followed bio->bi_bdev->bd_disk ending up being issued w/ mismatching
rq_disk. Make it follow orig_rq->rq_disk.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Tested-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
While completing a request from a REQ_FLUSH/FUA sequence, another
request can be pushed to the request queue. If a driver tests
elv_queue_empty() before completing a request and runs the queue again
only if the queue wasn't empty, this may lead to hang. Please note
that most drivers either kick the queue unconditionally or test queue
emptiness after completing the current request and don't have this
problem.
This patch removes this possibility by making REQ_FLUSH/FUA sequence
code kick the queue if the queue was empty before completing a request
from REQ_FLUSH/FUA sequence.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
init_flush_request() only set REQ_FLUSH when initializing flush
requests making them READ requests. Use WRITE_FLUSH instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
We need to call blk_rq_init and elv_insert for all cases in queue_next_fseq,
so take these calls into common code. Also move the end_io initialization
from queue_flush into queue_next_fseq and rename queue_flush to
init_flush_request now that it's old name doesn't apply anymore.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Now that the backend conversion is complete, export sequenced
FLUSH/FUA capability through REQ_FLUSH/FUA flags. REQ_FLUSH means the
device cache should be flushed before executing the request. REQ_FUA
means that the data in the request should be on non-volatile media on
completion.
Block layer will choose the correct way of implementing the semantics
and execute it. The request may be passed to the device directly if
the device can handle it; otherwise, it will be sequenced using one or
more proxy requests. Devices will never see REQ_FLUSH and/or FUA
which it doesn't support.
Also, unlike the original REQ_HARDBARRIER, REQ_FLUSH/FUA requests are
never failed with -EOPNOTSUPP. If the underlying device doesn't
support FLUSH/FUA, the block layer simply make those noop. IOW, it no
longer distinguishes between writeback cache which doesn't support
cache flush and writethrough/no cache. Devices which have WB cache
w/o flush are very difficult to come by these days and there's nothing
much we can do anyway, so it doesn't make sense to require everyone to
implement -EOPNOTSUPP handling. This will simplify filesystems and
block drivers as they can drop -EOPNOTSUPP retry logic for barriers.
* QUEUE_ORDERED_* are removed and QUEUE_FSEQ_* are moved into
blk-flush.c.
* REQ_FLUSH w/o data can also be directly passed to drivers without
sequencing but some drivers assume that zero length requests don't
have rq->bio which isn't true for these requests requiring the use
of proxy requests.
* REQ_COMMON_MASK now includes REQ_FLUSH | REQ_FUA so that they are
copied from bio to request.
* WRITE_BARRIER is marked deprecated and WRITE_FLUSH, WRITE_FUA and
WRITE_FLUSH_FUA are added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
With ordering requirements dropped, barrier and ordered are misnomers.
Now all block layer does is sequencing FLUSH and FUA. Rename them to
flush.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Without ordering requirements, barrier and ordering are minomers.
Rename block/blk-barrier.c to block/blk-flush.c. Rename of symbols
will follow.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Ming Lei