commit e2768b798a197318736f00c506633cb78ff77012 upstream.
In preparation for adding support for LPA2 to the tlb invalidation
routines, modify the algorithm used by range-based tlbi to start at the
highest 'scale' and decrement instead of starting at the lowest 'scale'
and incrementing. This new approach makes it possible to maintain 64K
alignment as we work through the range, until the last op (at scale=0).
This is required when LPA2 is enabled. (This part will be added in a
subsequent commit).
This change is separated into its own patch because it will also impact
non-LPA2 systems, and I want to make it easy to bisect in case it leads
to performance regression (see below for benchmarks that suggest this
should not be a problem).
The original commit (d1d3aa98 "arm64: tlb: Use the TLBI RANGE feature in
arm64") stated this as the reason for _incrementing_ scale:
However, in most scenarios, the pages = 1 when flush_tlb_range() is
called. Start from scale = 3 or other proper value (such as scale
=ilog2(pages)), will incur extra overhead. So increase 'scale' from 0
to maximum.
But pages=1 is already special cased by the non-range invalidation path,
which will take care of it the first time through the loop (both in the
original commit and in my change), so I don't think switching to
decrement scale should have any extra performance impact after all.
Indeed benchmarking kernel compilation, a TLBI-heavy workload, suggests
that this new approach actually _improves_ performance slightly (using a
virtual machine on Apple M2):
Table shows time to execute kernel compilation workload with 8 jobs,
relative to baseline without this patch (more negative number is
bigger speedup). Repeated 9 times across 3 system reboots:
| counter | mean | stdev |
|:----------|-----------:|----------:|
| real-time | -0.6% | 0.0% |
| kern-time | -1.6% | 0.5% |
| user-time | -0.4% | 0.1% |
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231127111737.1897081-2-ryan.roberts@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56f78615bcb1c3ba58a5d9911bad3d9185cf141b upstream.
After the commit d2689b6a86b9 ("net: usb: ax88179_178a: avoid two
consecutive device resets"), reset operation, in which the default mac
address from the device is read, is not executed from bind operation and
the random address, that is pregenerated just in case, is direclty written
the first time in the device, so the default one from the device is not
even read. This writing is not dangerous because is volatile and the
default mac address is not missed.
In order to avoid this and keep the simplification to have only one
reset and reduce the delays, restore the reset from bind operation and
remove the reset that is commanded from open operation. The behavior is
the same but everything is ready for usbnet_probe.
Tested with ASIX AX88179 USB Gigabit Ethernet devices.
Restore the old behavior for the rest of possible devices because I don't
have the hardware to test.
cc: stable@vger.kernel.org # 6.6+
Fixes: d2689b6a86b9 ("net: usb: ax88179_178a: avoid two consecutive device resets")
Reported-by: Jarkko Palviainen <jarkko.palviainen@gmail.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://lore.kernel.org/r/20240417085524.219532-1-jtornosm@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca91259b775f6fd98ae5d23bb4eec101d468ba8d upstream.
There is code in the SCSI core that sets the SCMD_FAIL_IF_RECOVERING
flag but there is no code that clears this flag. Instead of only clearing
SCMD_INITIALIZED in scsi_end_request(), clear all flags. It is never
necessary to preserve any command flags inside scsi_end_request().
Cc: stable@vger.kernel.org
Fixes: 310bcaef6d ("scsi: core: Support failing requests while recovering")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240325224417.1477135-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e871abcda3b67d0820b4182ebe93435624e9c6a4 upstream.
The entropy accounting changes a static key when the RNG has
initialized, since it only ever initializes once. Static key changes,
however, cannot be made from atomic context, so depending on where the
last creditable entropy comes from, the static key change might need to
be deferred to a worker.
Previously the code used the execute_in_process_context() helper
function, which accounts for whether or not the caller is
in_interrupt(). However, that doesn't account for the case where the
caller is actually in process context but is holding a spinlock.
This turned out to be the case with input_handle_event() in
drivers/input/input.c contributing entropy:
[<ffffffd613025ba0>] die+0xa8/0x2fc
[<ffffffd613027428>] bug_handler+0x44/0xec
[<ffffffd613016964>] brk_handler+0x90/0x144
[<ffffffd613041e58>] do_debug_exception+0xa0/0x148
[<ffffffd61400c208>] el1_dbg+0x60/0x7c
[<ffffffd61400c000>] el1h_64_sync_handler+0x38/0x90
[<ffffffd613011294>] el1h_64_sync+0x64/0x6c
[<ffffffd613102d88>] __might_resched+0x1fc/0x2e8
[<ffffffd613102b54>] __might_sleep+0x44/0x7c
[<ffffffd6130b6eac>] cpus_read_lock+0x1c/0xec
[<ffffffd6132c2820>] static_key_enable+0x14/0x38
[<ffffffd61400ac08>] crng_set_ready+0x14/0x28
[<ffffffd6130df4dc>] execute_in_process_context+0xb8/0xf8
[<ffffffd61400ab30>] _credit_init_bits+0x118/0x1dc
[<ffffffd6138580c8>] add_timer_randomness+0x264/0x270
[<ffffffd613857e54>] add_input_randomness+0x38/0x48
[<ffffffd613a80f94>] input_handle_event+0x2b8/0x490
[<ffffffd613a81310>] input_event+0x6c/0x98
According to Guoyong, it's not really possible to refactor the various
drivers to never hold a spinlock there. And in_atomic() isn't reliable.
So, rather than trying to be too fancy, just punt the change in the
static key to a workqueue always. There's basically no drawback of doing
this, as the code already needed to account for the static key not
changing immediately, and given that it's just an optimization, there's
not exactly a hurry to change the static key right away, so deferal is
fine.
Reported-by: Guoyong Wang <guoyong.wang@mediatek.com>
Cc: stable@vger.kernel.org
Fixes: f5bda35fba ("random: use static branch for crng_ready()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a4ea83a6e67f1415a1f17c1af5e9c814c882bb5 upstream.
While sched* events being traced and sched* events continuously happen,
"[xx] event tracing - enable/disable with subsystem level files" would
not stop as on some slower systems it seems to take forever.
Select the first 100 lines of output would be enough to judge whether
there are more than 3 types of sched events.
Fixes: 815b18ea66 ("ftracetest: Add basic event tracing test cases")
Cc: stable@vger.kernel.org
Signed-off-by: Yuanhe Shu <xiangzao@linux.alibaba.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4833e3abae132d613ce7da0e0c9a9465d1681fa upstream.
The rpcgss_context trace event acceptor field is a dynamically sized
string that records the "data" parameter. But this parameter is also
dependent on the "len" field to determine the size of the data.
It needs to use __string_len() helper macro where the length can be passed
in. It also incorrectly uses strncpy() to save it instead of
__assign_str(). As these macros can change, it is not wise to open code
them in trace events.
As of commit c759e609030c ("tracing: Remove __assign_str_len()"),
__assign_str() can be used for both __string() and __string_len() fields.
Before that commit, __assign_str_len() is required to be used. This needs
to be noted for backporting. (In actuality, commit c1fa617caeb0 ("tracing:
Rework __assign_str() and __string() to not duplicate getting the string")
is the commit that makes __string_str_len() obsolete).
Cc: stable@vger.kernel.org
Fixes: 0c77668ddb ("SUNRPC: Introduce trace points in rpc_auth_gss.ko")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e45882ca829b26b915162e8e86dbb1095768e9e upstream.
Object debugging tools were sporadically reporting illegal attempts to
free a still active i915 VMA object when parking a GT believed to be idle.
[161.359441] ODEBUG: free active (active state 0) object: ffff88811643b958 object type: i915_active hint: __i915_vma_active+0x0/0x50 [i915]
[161.360082] WARNING: CPU: 5 PID: 276 at lib/debugobjects.c:514 debug_print_object+0x80/0xb0
...
[161.360304] CPU: 5 PID: 276 Comm: kworker/5:2 Not tainted 6.5.0-rc1-CI_DRM_13375-g003f860e5577+ #1
[161.360314] Hardware name: Intel Corporation Rocket Lake Client Platform/RocketLake S UDIMM 6L RVP, BIOS RKLSFWI1.R00.3173.A03.2204210138 04/21/2022
[161.360322] Workqueue: i915-unordered __intel_wakeref_put_work [i915]
[161.360592] RIP: 0010:debug_print_object+0x80/0xb0
...
[161.361347] debug_object_free+0xeb/0x110
[161.361362] i915_active_fini+0x14/0x130 [i915]
[161.361866] release_references+0xfe/0x1f0 [i915]
[161.362543] i915_vma_parked+0x1db/0x380 [i915]
[161.363129] __gt_park+0x121/0x230 [i915]
[161.363515] ____intel_wakeref_put_last+0x1f/0x70 [i915]
That has been tracked down to be happening when another thread is
deactivating the VMA inside __active_retire() helper, after the VMA's
active counter has been already decremented to 0, but before deactivation
of the VMA's object is reported to the object debugging tool.
We could prevent from that race by serializing i915_active_fini() with
__active_retire() via ref->tree_lock, but that wouldn't stop the VMA from
being used, e.g. from __i915_vma_retire() called at the end of
__active_retire(), after that VMA has been already freed by a concurrent
i915_vma_destroy() on return from the i915_active_fini(). Then, we should
rather fix the issue at the VMA level, not in i915_active.
Since __i915_vma_parked() is called from __gt_park() on last put of the
GT's wakeref, the issue could be addressed by holding the GT wakeref long
enough for __active_retire() to complete before that wakeref is released
and the GT parked.
I believe the issue was introduced by commit d939397303 ("drm/i915:
Remove the vma refcount") which moved a call to i915_active_fini() from
a dropped i915_vma_release(), called on last put of the removed VMA kref,
to i915_vma_parked() processing path called on last put of a GT wakeref.
However, its visibility to the object debugging tool was suppressed by a
bug in i915_active that was fixed two weeks later with commit e92eb246fe
("drm/i915/active: Fix missing debug object activation").
A VMA associated with a request doesn't acquire a GT wakeref by itself.
Instead, it depends on a wakeref held directly by the request's active
intel_context for a GT associated with its VM, and indirectly on that
intel_context's engine wakeref if the engine belongs to the same GT as the
VMA's VM. Those wakerefs are released asynchronously to VMA deactivation.
Fix the issue by getting a wakeref for the VMA's GT when activating it,
and putting that wakeref only after the VMA is deactivated. However,
exclude global GTT from that processing path, otherwise the GPU never goes
idle. Since __i915_vma_retire() may be called from atomic contexts, use
async variant of wakeref put. Also, to avoid circular locking dependency,
take care of acquiring the wakeref before VM mutex when both are needed.
v7: Add inline comments with justifications for:
- using untracked variants of intel_gt_pm_get/put() (Nirmoy),
- using async variant of _put(),
- not getting the wakeref in case of a global GTT,
- always getting the first wakeref outside vm->mutex.
v6: Since __i915_vma_active/retire() callbacks are not serialized, storing
a wakeref tracking handle inside struct i915_vma is not safe, and
there is no other good place for that. Use untracked variants of
intel_gt_pm_get/put_async().
v5: Replace "tile" with "GT" across commit description (Rodrigo),
- avoid mentioning multi-GT case in commit description (Rodrigo),
- explain why we need to take a temporary wakeref unconditionally inside
i915_vma_pin_ww() (Rodrigo).
v4: Refresh on top of commit 5e4e06e4087e ("drm/i915: Track gt pm
wakerefs") (Andi),
- for more easy backporting, split out removal of former insufficient
workarounds and move them to separate patches (Nirmoy).
- clean up commit message and description a bit.
v3: Identify root cause more precisely, and a commit to blame,
- identify and drop former workarounds,
- update commit message and description.
v2: Get the wakeref before VM mutex to avoid circular locking dependency,
- drop questionable Fixes: tag.
Fixes: d939397303 ("drm/i915: Remove the vma refcount")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/8875
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org # v5.19+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240305143747.335367-6-janusz.krzysztofik@linux.intel.com
(cherry picked from commit f3c71b2ded5c4367144a810ef25f998fd1d6c381)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 978e5c19dfefc271e5550efba92fcef0d3f62864 upstream.
This bug was introduced in commit 950e79dd73 ("io_uring: minor
io_cqring_wait() optimization"), which was made in preparation for
adc8682ec6 ("io_uring: Add support for napi_busy_poll"). The latter
got reverted in cb31821673 ("Revert "io_uring: Add support for
napi_busy_poll""), so simply undo the former as well.
Cc: stable@vger.kernel.org
Fixes: 950e79dd73 ("io_uring: minor io_cqring_wait() optimization")
Signed-off-by: Alexey Izbyshev <izbyshev@ispras.ru>
Link: https://lore.kernel.org/r/20240405125551.237142-1-izbyshev@ispras.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 350ab13e1382f2afcc2285041a1e75b80d771c2c ]
The vb2 read support requests 1 buffer, leaving it to the driver
to increase this number to something that works.
Unfortunately, drivers do not deal with this reliably, and in fact
this caused problems for the bttv driver and reading from /dev/vbiX,
causing every other VBI frame to be all 0.
Instead, request as the number of buffers whatever is the maximum of
2 and q->min_buffers_needed+1.
In order to start streaming you need at least q->min_buffers_needed
queued buffers, so add 1 buffer for processing. And if that field
is 0, then choose 2 (again, one buffer is being filled while the
other one is being processed).
This certainly makes more sense than requesting just 1 buffer, and
the VBI bttv support is now working again.
It turns out that the old videobuf1 behavior of bttv was to allocate
8 (video) and 4 (vbi) buffers when used with read(). After the vb2
conversion that changed to 2 for both. With this patch it is 3, which
is really all you need.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: b7ec3212a7 ("media: bttv: convert to vb2")
Tested-by: Dr. David Alan Gilbert <dave@treblig.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46b1f1b839cad600de3ad7ed999bd0155c528746 ]
The function _dpu_hw_sspp_setup_scaler3() passes and
dpu_hw_setup_scaler3() uses scaler_blk.version to determine in which way
the scaler (QSEED3) block should be programmed. However up to now we
were not setting this field. Set it now, splitting the vig_sblk data
which has different version fields.
Reported-by: Marijn Suijten <marijn.suijten@somainline.org>
Fixes: 9b6f4fedaa ("drm/msm/dpu: Add SM6125 support")
Fixes: 27f0df03f3 ("drm/msm/dpu: Add SM6375 support")
Fixes: 3186acba5c ("drm/msm/dpu: Add SM6350 support")
Fixes: efcd010772 ("drm/msm/dpu: add support for SM8550")
Fixes: 4a352c2fc1 ("drm/msm/dpu: Introduce SC8280XP")
Fixes: 0e91bcbb00 ("drm/msm/dpu: Add SM8350 to hw catalog")
Fixes: 100d7ef699 ("drm/msm/dpu: add support for SM8450")
Fixes: 3581b7062c ("drm/msm/disp/dpu1: add support for display on SM6115")
Fixes: dabfdd89ea ("drm/msm/disp/dpu1: add inline rotation support for sc7280")
Fixes: f3af2d6ee9 ("drm/msm/dpu: Add SC8180x to hw catalog")
Fixes: 94391a14fc ("drm/msm/dpu1: Add MSM8998 to hw catalog")
Fixes: af776a3e1c ("drm/msm/dpu: add SM8250 to hw catalog")
Fixes: 386fced3f7 ("drm/msm/dpu: add SM8150 to hw catalog")
Fixes: b75ab05a34 ("msm:disp:dpu1: add scaler support on SC7180 display")
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570098/
Link: https://lore.kernel.org/r/20231201234234.2065610-2-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4a6bceac98eba3c00e874892736b34ea5fdaca3 ]
After commit 6d029c25b71f ("selftests/timers/posix_timers: Reimplement
check_timer_distribution()") the following warning occurs when building
with an older gcc:
posix_timers.c:250:2: warning: format not a string literal and no format arguments [-Wformat-security]
250 | ksft_print_msg(errmsg);
| ^~~~~~~~~~~~~~
Fix this up by changing it to ksft_print_msg("%s", errmsg)
Fixes: 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()")
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Justin Stitt <justinstitt@google.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410232637.4135564-1-jstultz@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b372e96bd0a32729d55d27f613c8bc80708a82e1 ]
The page has been marked clean before writepage is called. If we don't
redirty it before postponing the write, it might never get written.
Cc: stable@vger.kernel.org
Fixes: 503d4fa6ee ("ceph: remove reliance on bdi congestion")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5995d90d2d19f337df6a50bcf4699ef053214dac ]
We need to covert the inode to ceph_client in the following commit,
and will add one new helper for that, here we rename the old helper
to _fs_client().
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Stable-dep-of: b372e96bd0a3 ("ceph: redirty page before returning AOP_WRITEPAGE_ACTIVATE")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 197b7d792d6aead2e30d4b2c054ffabae2ed73dc ]
We will use the 'mdsc' to get the global_id in the following commits.
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Stable-dep-of: b372e96bd0a3 ("ceph: redirty page before returning AOP_WRITEPAGE_ACTIVATE")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 953927587f37b731abdeabe46ad44a3b3ec67a52 ]
[WHY&HOW]
We should not be recursively calling the manual trigger programming function when
FAMS is not in use.
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d029c25b71f2de2838a6f093ce0fa0e69336154 ]
check_timer_distribution() runs ten threads in a busy loop and tries to
test that the kernel distributes a process posix CPU timer signal to every
thread over time.
There is not guarantee that this is true even after commit bcb7ee7902
("posix-timers: Prefer delivery of signals to the current thread") because
that commit only avoids waking up the sleeping process leader thread, but
that has nothing to do with the actual signal delivery.
As the signal is process wide the first thread which observes sigpending
and wins the race to lock sighand will deliver the signal. Testing shows
that this hangs on a regular base because some threads never win the race.
The comment "This primarily tests that the kernel does not favour any one."
is wrong. The kernel does favour a thread which hits the timer interrupt
when CLOCK_PROCESS_CPUTIME_ID expires.
Rewrite the test so it only checks that the group leader sleeping in join()
never receives SIGALRM and the thread which burns CPU cycles receives all
signals.
In older kernels which do not have commit bcb7ee7902 ("posix-timers:
Prefer delivery of signals to the current thread") the test-case fails
immediately, the very 1st tick wakes the leader up. Otherwise it quickly
succeeds after 100 ticks.
CI testing wants to use newer selftest versions on stable kernels. In this
case the test is guaranteed to fail.
So check in the failure case whether the kernel version is less than v6.3
and skip the test result in that case.
[ tglx: Massaged change log, renamed the version check helper ]
Fixes: e797203fb3 ("selftests/timers/posix_timers: Test delivery of signals across threads")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240409133802.GD29396@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 071af0c9e582bc47e379e39490a2bc1adfe4ec68 ]
Currently the posix_timers test does not produce KTAP output but rather a
custom format. This means that we only get a pass/fail for the suite, not
for each individual test that the suite does. Convert to using the standard
kselftest output functions which result in KTAP output being generated.
As part of this fix the printing of diagnostics in the unlikely event that
the pthread APIs fail, these were using perror() but the API functions
directly return an error code instead of setting errno.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a36e46df7aa781c756f09727d37dc2783f1ee75 ]
All joined pipes share the same transcoder/timing generator.
Currently we just do the commits per-pipe, which doesn't really
work if we need to change the timings at the same time. For
now just disable live M/N updates when bigjoiner is needed.
Cc: stable@vger.kernel.org
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-5-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit ef79820db723a2a7c229a7251c12859e7e25a247)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 825edc8bc72f3266534a04e9a4447b12332fac82 ]
Make the seamless_m_n flag more like the update_pipe fastset
flag, ie. the flag will only be set if we need to do the seamless
M/N update, and in all other cases the flag is cleared. Also
rename the flag to update_m_n to make it more clear it's similar
to update_pipe.
I believe special casing seamless_m_n like this makes sense
as it also affects eg. vblank evasion. We can potentially avoid
some vblank evasion tricks, simplify some checks, and hopefully
will help with the VRR vs. M/N mess.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-6-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Stable-dep-of: 4a36e46df7aa ("drm/i915: Disable live M/N updates when using bigjoiner")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 691dec86acc3afb469f09e9a4a00508b458bdb0c ]
In order to reconcile seamless M/N updates with VRR we'll
need to defer the fastset VRR enable to happen after the
seamless M/N update (which happens during the vblank evade
critical section). So just push the VRR enable to be the last
thing during the update.
This will also affect the vblank evasion as the transcoder
will now still be running with the old VRR state during
the vblank evasion. So just grab the timings always from the
old crtc state during any non-modeset commit, and also grab
the current state of VRR from the active timings (as we disable
VRR before vblank evasion during fastsets).
This also fixes vblank evasion for seamless M/N updates as
we now properly account for the fact that the M/N update
happens after vblank evasion.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-5-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Stable-dep-of: 4a36e46df7aa ("drm/i915: Disable live M/N updates when using bigjoiner")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4b0cece716c95e16d973a774d5a5c5cc8cb335d ]
Pull the vblank evasion scanline calculations into their own helper
to declutter intel_pipe_update_start() a bit.
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-4-ville.syrjala@linux.intel.com
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Stable-dep-of: 4a36e46df7aa ("drm/i915: Disable live M/N updates when using bigjoiner")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09f390d4e2f38f8433431f4da31ca0a17a5c7853 ]
We'll need to also look at the old crtc state in
intel_pipe_update_start() so change the calling convention to
just plumb in the full atomic state instead.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-3-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Stable-dep-of: 4a36e46df7aa ("drm/i915: Disable live M/N updates when using bigjoiner")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6154cc9177ccea00c89ce0bf93352e474b819ff2 ]
Currently we only consider the relationship of the
old and new CDCLK frequencies when determining whether
to do the repgramming from intel_set_cdclk_pre_plane_update()
or intel_set_cdclk_post_plane_update().
It is technically possible to have a situation where the
CDCLK frequency is decreasing, but the voltage_level is
increasing due a DDI port. In this case we should bump
the voltage level already in intel_set_cdclk_pre_plane_update()
(so that the voltage_level will have been increased by the
time the port gets enabled), while leaving the CDCLK frequency
unchanged (as active planes/etc. may still depend on it).
We can then reduce the CDCLK frequency to its final value
from intel_set_cdclk_post_plane_update().
In order to handle that correctly we shall construct a
suitable amalgam of the old and new cdclk states in
intel_set_cdclk_pre_plane_update().
And we can simply call intel_set_cdclk() unconditionally
in both places as it will not do anything if nothing actually
changes vs. the current hw state.
v2: Handle cdclk_state->disable_pipes
v3: Only synchronize the cd2x update against the pipe's vblank
when the cdclk frequency is changing during the current
commit phase (Gustavo)
Cc: stable@vger.kernel.org
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-3-ville.syrjala@linux.intel.com
(cherry picked from commit 34d127e2bdef73a923aa0dcd95cbc3257ad5af52)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 126f94e87e7960ef7ae58180e39c19cc9dcbbf7f ]
On pre-TGL FEC is a port level feature, not a transcoder
level feature, and it's DDI A which doesn't have it, not
trancoder A. Check for the correct thing when determining
whether FEC is supported or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-5-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Stable-dep-of: 99f855082f22 ("drm/i915/mst: Reject FEC+MST on ICL")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a05ad21d77a188d06481c36d6016805a881bcc0 ]
Avoid refreshing DFS referral with refpath_lock acquired as the I/O
could block for a while due to a potentially disconnected or slow DFS
root server and then making other threads - that use same @server and
don't require a DFS root server - unable to make any progress.
Cc: stable@vger.kernel.org # 6.4+
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 062a7f0ff46eb57aff526897bd2bebfdb1d3046a ]
Avoid potential use-after-free bugs when walking DFS referrals,
mounting and performing DFS failover by ensuring that all children
from parent @tcon->ses are also refcounted. They're all needed across
the entire DFS mount. Get rid of @tcon->dfs_ses_list while we're at
it, too.
Cc: stable@vger.kernel.org # 6.4+
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404021527.ZlRkIxgv-lkp@intel.com/
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8392c203e84ec7daa2afecdb8f4db69bc32416a ]
In analyzing problems, one missing piece of debug data is when the
mount occurred. A related problem is when collecting stats we don't
know the period of time the stats covered, ie when this set of stats
for the tcon started to be collected. To make debugging easier track
the stats begin time. Set it when the mount occurred at mount time,
and reset it to current time whenever stats are reset. For example,
...
1) \\localhost\test
SMBs: 14 since 2024-01-17 22:17:30 UTC
Bytes read: 0 Bytes written: 0
Open files: 0 total (local), 0 open on server
TreeConnects: 1 total 0 failed
TreeDisconnects: 0 total 0 failed
...
2) \\localhost\scratch
SMBs: 24 since 2024-01-17 22:16:04 UTC
Bytes read: 0 Bytes written: 0
Open files: 0 total (local), 0 open on server
TreeConnects: 1 total 0 failed
TreeDisconnects: 0 total 0 failed
...
Note the time "since ... UTC" is now displayed in /proc/fs/cifs/Stats
for each share that is mounted.
Suggested-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 062a7f0ff46e ("smb: client: guarantee refcounted children from parent session")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24a9799aa8efecd0eb55a75e35f9d8e6400063aa ]
The UAF bug is due to smb2_reconnect_server() accessing a session that
is already being teared down by another thread that is executing
__cifs_put_smb_ses(). This can happen when (a) the client has
connection to the server but no session or (b) another thread ends up
setting @ses->ses_status again to something different than
SES_EXITING.
To fix this, we need to make sure to unconditionally set
@ses->ses_status to SES_EXITING and prevent any other threads from
setting a new status while we're still tearing it down.
The following can be reproduced by adding some delay to right after
the ipc is freed in __cifs_put_smb_ses() - which will give
smb2_reconnect_server() worker a chance to run and then accessing
@ses->ipc:
kinit ...
mount.cifs //srv/share /mnt/1 -o sec=krb5,nohandlecache,echo_interval=10
[disconnect srv]
ls /mnt/1 &>/dev/null
sleep 30
kdestroy
[reconnect srv]
sleep 10
umount /mnt/1
...
CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed
CIFS: VFS: \\srv Send error in SessSetup = -126
CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed
CIFS: VFS: \\srv Send error in SessSetup = -126
general protection fault, probably for non-canonical address
0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 PID: 50 Comm: kworker/3:1 Not tainted 6.9.0-rc2 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39
04/01/2014
Workqueue: cifsiod smb2_reconnect_server [cifs]
RIP: 0010:__list_del_entry_valid_or_report+0x33/0xf0
Code: 4f 08 48 85 d2 74 42 48 85 c9 74 59 48 b8 00 01 00 00 00 00 ad
de 48 39 c2 74 61 48 b8 22 01 00 00 00 00 74 69 <48> 8b 01 48 39 f8 75
7b 48 8b 72 08 48 39 c6 0f 85 88 00 00 00 b8
RSP: 0018:ffffc900001bfd70 EFLAGS: 00010a83
RAX: dead000000000122 RBX: ffff88810da53838 RCX: 6b6b6b6b6b6b6b6b
RDX: 6b6b6b6b6b6b6b6b RSI: ffffffffc02f6878 RDI: ffff88810da53800
RBP: ffff88810da53800 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff88810c064000
R13: 0000000000000001 R14: ffff88810c064000 R15: ffff8881039cc000
FS: 0000000000000000(0000) GS:ffff888157c00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe3728b1000 CR3: 000000010caa4000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
? die_addr+0x36/0x90
? exc_general_protection+0x1c1/0x3f0
? asm_exc_general_protection+0x26/0x30
? __list_del_entry_valid_or_report+0x33/0xf0
__cifs_put_smb_ses+0x1ae/0x500 [cifs]
smb2_reconnect_server+0x4ed/0x710 [cifs]
process_one_work+0x205/0x6b0
worker_thread+0x191/0x360
? __pfx_worker_thread+0x10/0x10
kthread+0xe2/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c37ed2d7d09869f30d291b9c6cba56ea4f0b0417 ]
If @ses->chan_count <= 1, then for-loop body will not be executed so
no need to check it twice.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 24a9799aa8ef ("smb: client: fix UAF in smb2_reconnect_server()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c3e2a5f2da904a18661335e8be2b961738574998 upstream.
The previous check for the is_vsc_sdp_colorimetry_supported flag
for MST sink signals did nothing. Simplify the code and use the
same check for MST and SST.
Cc: stable@vger.kernel.org
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e61ef8d219877202d4ee51d0d2ad9072c99a262 upstream.
In order for display colorimetry to work correctly on DP displays
we need to send the VSC SDP packet. We should only do so for
panels with DPCD revision greater or equal to 1.4 as older
receivers might have problems with it.
Cc: stable@vger.kernel.org
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Xaver Hugl <xaver.hugl@gmail.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Agustin Gutierrez <Agustin.Gutierrez@amd.com>
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bbca7f414ae9a12ea231cdbafd79c607e3337ea8 upstream.
The RB bitmap should be global active RB bitmap &
active RB bitmap based on active SA.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 65ff8092e4802f96d87d3d7cde146961f5228265 upstream.
There are cases where soft reset seems to succeed, but
does not, so always use mode1/2 for now.
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b2be55f4d6c1099d7f629b0ed7535a5be788c83 upstream.
For SOC21 ASICs, there is an issue in re-enabling PM features if a
suspend got aborted. In such cases, reset the device during resume
phase. This is a workaround till a proper solution is finalized.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0653d501409eeb9f1deb7e4c12e4d0d2c9f1cba1 upstream.
The current modeset sequence can't handle port sync and bigjoiner
at the same time. Refuse port sync when bigjoiner is needed,
at least until we fix the modeset sequence.
v2: Add a FIXME (Vandite)
Cc: stable@vger.kernel.org
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-4-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit b37e1347b991459c38c56ec2476087854a4f720b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b1f6b5aaec0f849e19c3e99d4eea75876853cdd upstream.
Currently we always reprogram CDCLK from the
intel_set_cdclk_pre_plane_update() when using squash/crawl.
The code only works correctly for the cd2x update or full
modeset cases, and it was simply never updated to deal with
squash/crawl.
If the CDCLK frequency is increasing we must reprogram it
before we do anything else that might depend on the new
higher frequency, and conversely we must not decrease
the frequency until everything that might still depend
on the old higher frequency has been dealt with.
Since cdclk_state->pipe is only relevant when doing a cd2x
update we can't use it to determine the correct sequence
during squash/crawl. To that end introduce cdclk_state->disable_pipes
which simply indicates that we must perform the update
while the pipes are disable (ie. during
intel_set_cdclk_pre_plane_update()). Otherwise we use the
same old vs. new CDCLK frequency comparsiong as for cd2x
updates.
The only remaining problem case is when the voltage_level
needs to increase due to a DDI port, but the CDCLK frequency
is decreasing (and not all pipes are being disabled). The
current approach will not bump the voltage level up until
after the port has already been enabled, which is too late.
But we'll take care of that case separately.
v2: Don't break the "must disable pipes case"
v3: Keep the on stack 'pipe' for future use
Cc: stable@vger.kernel.org
Fixes: d62686ba3b ("drm/i915/adl_p: CDCLK crawl support for ADL")
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-2-ville.syrjala@linux.intel.com
(cherry picked from commit 3aecee90ac12a351905f12dda7643d5b0676d6ca)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f511739c54b549061993b53fc0380f48dfca23b upstream.
For consistency with the other CONFIG_MITIGATION_* options, replace the
CONFIG_SPECTRE_BHI_{ON,OFF} options with a single
CONFIG_MITIGATION_SPECTRE_BHI option.
[ mingo: Fix ]
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/3833812ea63e7fdbe36bf8b932e63f70d18e2a2a.1712813475.git.jpoimboe@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 36d4fe147c870f6d3f6602befd7ef44393a1c87a upstream.
Unlike most other mitigations' "auto" options, spectre_bhi=auto only
mitigates newer systems, which is confusing and not particularly useful.
Remove it.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/412e9dc87971b622bbbaf64740ebc1f140bff343.1712813475.git.jpoimboe@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f882f3b0a8bf0788d5a0ee44b1191de5319bb8a upstream.
While syscall hardening helps prevent some BHI attacks, there's still
other low-hanging fruit remaining. Don't classify it as a mitigation
and make it clear that the system may still be vulnerable if it doesn't
have a HW or SW mitigation enabled.
Fixes: ec9404e40e8f ("x86/bhi: Add BHI mitigation knob")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/b5951dae3fdee7f1520d5136a27be3bdfe95f88b.1712813475.git.jpoimboe@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cea8a280dfd1016148a3820676f2f03e3f5b898 upstream.
The ARCH_CAP_RRSBA check isn't correct: RRSBA may have already been
disabled by the Spectre v2 mitigation (or can otherwise be disabled by
the BHI mitigation itself if needed). In that case retpolines are fine.
Fixes: ec9404e40e8f ("x86/bhi: Add BHI mitigation knob")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/6f56f13da34a0834b69163467449be7f58f253dc.1712813475.git.jpoimboe@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0485730d2189ffe5d986d4e9e191f1e4d5ffd24 upstream.
So we are using the 'ia32_cap' value in a number of places,
which got its name from MSR_IA32_ARCH_CAPABILITIES MSR register.
But there's very little 'IA32' about it - this isn't 32-bit only
code, nor does it originate from there, it's just a historic
quirk that many Intel MSR names are prefixed with IA32_.
This is already clear from the helper method around the MSR:
x86_read_arch_cap_msr(), which doesn't have the IA32 prefix.
So rename 'ia32_cap' to 'x86_arch_cap_msr' to be consistent with
its role and with the naming of the helper function.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Nikolay Borisov <nik.borisov@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/9592a18a814368e75f8f4b9d74d3883aa4fd1eaf.1712813475.git.jpoimboe@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cb2db5bb04d7f778fbc1a1ea2507aab436f1bff3 upstream.
There's no need to keep reading MSR_IA32_ARCH_CAPABILITIES over and
over. It's even read in the BHI sysfs function which is a big no-no.
Just read it once and cache it.
Fixes: ec9404e40e8f ("x86/bhi: Add BHI mitigation knob")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/9592a18a814368e75f8f4b9d74d3883aa4fd1eaf.1712813475.git.jpoimboe@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04f4230e2f86a4e961ea5466eda3db8c1762004d upstream.
The definition of spectre_bhi_state() incorrectly returns a const char
* const. This causes the a compiler warning when building with W=1:
warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
2812 | static const char * const spectre_bhi_state(void)
Remove the const qualifier from the pointer.
Fixes: ec9404e40e8f ("x86/bhi: Add BHI mitigation knob")
Reported-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240409230806.1545822-1-daniel.sneddon@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1d11fc2c8320871b40730991071dd0a0b405bc8 upstream.
When building with 'make W=1' but CONFIG_TRACE_IRQFLAGS=n, the
unused argument to lockdep_hrtimer_exit() causes a warning:
kernel/time/hrtimer.c:1655:14: error: variable 'expires_in_hardirq' set but not used [-Werror=unused-but-set-variable]
This is intentional behavior, so add a cast to void to shut up the warning.
Fixes: 73d20564e0 ("hrtimer: Don't dereference the hrtimer pointer after the callback")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240408074609.3170807-1-arnd@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202311191229.55QXHVc6-lkp@intel.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ce344beaca688f4cdea07045e0b8f03dc537e74 upstream.
When done from a virtual machine, instructions that touch APIC memory
must be emulated. By convention, MMIO accesses are typically performed
via io.h helpers such as readl() or writeq() to simplify instruction
emulation/decoding (ex: in KVM hosts and SEV guests) [0].
Currently, native_apic_mem_read() does not follow this convention,
allowing the compiler to emit instructions other than the MOV
instruction generated by readl(). In particular, when the kernel is
compiled with clang and run as a SEV-ES or SEV-SNP guest, the compiler
would emit a TESTL instruction which is not supported by the SEV-ES
emulator, causing a boot failure in that environment. It is likely the
same problem would happen in a TDX guest as that uses the same
instruction emulator as SEV-ES.
To make sure all emulators can emulate APIC memory reads via MOV, use
the readl() function in native_apic_mem_read(). It is expected that any
emulator would support MOV in any addressing mode as it is the most
generic and is what is usually emitted currently.
The TESTL instruction is emitted when native_apic_mem_read() is inlined
into apic_mem_wait_icr_idle(). The emulator comes from
insn_decode_mmio() in arch/x86/lib/insn-eval.c. It's not worth it to
extend insn_decode_mmio() to support more instructions since, in theory,
the compiler could choose to output nearly any instruction for such
reads which would bloat the emulator beyond reason.
[0] https://lore.kernel.org/all/20220405232939.73860-12-kirill.shutemov@linux.intel.com/
[ bp: Massage commit message, fix typos. ]
Signed-off-by: Adam Dunlap <acdunlap@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Kevin Loughlin <kevinloughlin@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240318230927.2191933-1-acdunlap@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed366de8ec89d4f960d66c85fc37d9de22f7bf6d upstream.
Building with clang results in the following warning:
posix_timers.c:69:6: warning: absolute value function 'abs' given an
argument of type 'long long' but has parameter of type 'int' which may
cause truncation of value [-Wabsolute-value]
if (abs(diff - DELAY * USECS_PER_SEC) > USECS_PER_SEC / 2) {
^
So switch to using llabs() instead.
Fixes: 0bc4b0cf15 ("selftests: add basic posix timers selftests")
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410232637.4135564-3-jstultz@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ryan Roberts