Commit Graph

1223666 Commits

Author SHA1 Message Date
Rafał Miłecki 999d7695d8 arm64: dts: mediatek: mt7622: fix IR nodename
[ Upstream commit 800dc93c3941e372c94278bf4059e6e82f60bd66 ]

Fix following validation error:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: cir@10009000: $nodename:0: 'cir@10009000' does not match '^ir(-receiver)?(@[a-f0-9]+)?$'
        from schema $id: http://devicetree.org/schemas/media/mediatek,mt7622-cir.yaml#

Fixes: ae457b7679 ("arm64: dts: mt7622: add SoC and peripheral related device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317221050.18595-3-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:32 +02:00
Rafał Miłecki 837f0b9ae2 arm64: dts: mediatek: mt7622: fix clock controllers
[ Upstream commit 3ba5a61594347ab46e7c2cff6cd63ea0f1282efb ]

1. Drop unneeded "syscon"s (bindings were updated recently)
2. Use "clock-controller" in nodenames
3. Add missing "#clock-cells"

Fixes: d7167881e0 ("arm64: dts: mt7622: add clock controller device nodes")
Fixes: e9b65ecb7c ("arm64: dts: mediatek: mt7622: introduce nodes for Wireless Ethernet Dispatch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317221050.18595-2-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:32 +02:00
Pin-yen Lin 13f40798f1 arm64: dts: mediatek: mt8183-kukui: Use default min voltage for MT6358
[ Upstream commit 296118a8dc297de47d9b3a364b9743f8446bd612 ]

The requested voltage could be lower than the minimum voltage on the
GPU OPP table when the MTK Smart Voltage Scaling (SVS) driver is
enabled, so removing the definition in mt8183-kukui to use the default
minimum voltage (500000 uV) defined in mt6358.dtsi.

Fixes: 31c6732da9 ("arm64: dts: mediatek: mt8183-kukui: Override vgpu/vsram_gpu constraints")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240315111621.2263159-4-treapking@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:32 +02:00
Pin-yen Lin a594104da2 arm64: dts: mediatek: mt8195-cherry: Update min voltage constraint for MT6315
[ Upstream commit e9a6b8b5c61350535c7eb5ea9b2dde0d5745bd1b ]

Update the minimum voltage from 300000 uV to 400000 uV so it matches
the MT6315 datasheet.

Also update the minimum voltage for Vgpu regulator from 625000 uV to
400000 uV because the requested voltage could be lower than the minimum
voltage on the GPU OPP table when the MTK Smart Voltage Scaling (SVS)
driver is enabled.

Fixes: 260c04d425 ("arm64: dts: mediatek: cherry: Enable MT6315 regulators on SPMI bus")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240315111621.2263159-3-treapking@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:32 +02:00
Pin-yen Lin 9d0b70b5b2 arm64: dts: mediatek: mt8192-asurada: Update min voltage constraint for MT6315
[ Upstream commit 374a7c6400e314458178255a63c37d6347845092 ]

Update the minimum voltage from 300000 uV to 400000 uV so it matches
the MT6315 datasheet.

Also update the minimum voltage for Vgpu regulator from 606250 uV to
400000 uV because the requested voltage could be lower than the minimum
voltage on the GPU OPP table when the MTK Smart Voltage Scaling (SVS)
driver is enabled.

Fixes: 3183cb62b0 ("arm64: dts: mediatek: asurada: Add SPMI regulators")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240315111621.2263159-2-treapking@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:32 +02:00
Nícolas F. R. A. Prado 0c29f85ad1 arm64: dts: mediatek: cherry: Describe CPU supplies
[ Upstream commit 17b33dd9e4a38fbaca87c68e532b52f9d0492ba7 ]

Describe in each CPU node the regulator supplying it.

Fixes: 260c04d425 ("arm64: dts: mediatek: cherry: Enable MT6315 regulators on SPMI bus")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240110142305.755367-2-nfraprado@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:31 +02:00
AngeloGioacchino Del Regno a61f1a5799 arm64: dts: mediatek: cherry: Add platform thermal configuration
[ Upstream commit 729f30eac8bce6783f889cf8390ea869d03407e6 ]

This platform has three auxiliary NTC thermistors, connected to the
SoC's ADC pins. Enable the auxadc in order to be able to read the
ADC values, add a generic-adc-thermal LUT for each and finally assign
them to the SoC's thermal zones.

Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230424112523.1436926-2-angelogioacchino.delregno@collabora.com
Stable-dep-of: 17b33dd9e4a3 ("arm64: dts: mediatek: cherry: Describe CPU supplies")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:31 +02:00
Nícolas F. R. A. Prado 2928d2baf2 arm64: dts: mediatek: mt8195: Add missing gce-client-reg to mutex1
[ Upstream commit 58f126296c3c52d02bf3fad1f68c331d718c4a9b ]

Add the missing mediatek,gce-client-reg property to the mutex1 node to
allow it to use the GCE. This prevents the "can't parse gce-client-reg
property" error from being printed and should result in better
performance.

Fixes: 92d2c23dc2 ("arm64: dts: mt8195: add display node for vdosys1")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-add-missing-mt8192-95-v1-4-b12c233a8a33@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:31 +02:00
Nícolas F. R. A. Prado 49785030e3 arm64: dts: mediatek: mt8195: Add missing gce-client-reg to mutex
[ Upstream commit 3b129949184a1251e6a42db714f6d68b75fabedd ]

Add the missing mediatek,gce-client-reg property to the mutex node to
allow it to use the GCE. This prevents the "can't parse gce-client-reg
property" error from being printed and should result in better
performance.

Fixes: b852ee68fd ("arm64: dts: mt8195: Add display node for vdosys0")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-add-missing-mt8192-95-v1-3-b12c233a8a33@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:31 +02:00
Nícolas F. R. A. Prado 346ffd2d39 arm64: dts: mediatek: mt8195: Add missing gce-client-reg to vpp/vdosys
[ Upstream commit 96b0c1528ef41fe754f5d1378b1db6c098a2e33f ]

Add the missing mediatek,gce-client-reg property to the vppsys and
vdosys nodes to allow them to use the GCE. This prevents the "can't
parse gce-client-reg property" error from being printed and should
result in better performance.

Fixes: 6aa5b46d17 ("arm64: dts: mt8195: Add vdosys and vppsys clock nodes")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-add-missing-mt8192-95-v1-2-b12c233a8a33@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:31 +02:00
Nícolas F. R. A. Prado 550ad9aa3a arm64: dts: mediatek: mt8192: Add missing gce-client-reg to mutex
[ Upstream commit 00bcc8810d9dd69d3899a4189e2f3964f263a600 ]

Add the missing mediatek,gce-client-reg property to the mutex node to
allow it to use the GCE. This prevents the "can't parse gce-client-reg
property" error from being printed and should result in better
performance.

Fixes: b4b75bac95 ("arm64: dts: mt8192: Add display nodes")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-add-missing-mt8192-95-v1-1-b12c233a8a33@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:31 +02:00
Ikjoon Jang 88b162518b arm64: dts: mediatek: mt8183: Add power-domains properity to mfgcfg
[ Upstream commit 1781f2c461804c0123f59afc7350e520a88edffb ]

mfgcfg clock is under MFG_ASYNC power domain.

Fixes: e526c9bc11 ("arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile")
Fixes: 37fb78b9ae ("arm64: dts: mediatek: Add mt8183 power domains controller")
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240223091122.2430037-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:31 +02:00
Dragan Simic 4142a160b0 arm64: dts: rockchip: Remove unsupported node from the Pinebook Pro dts
[ Upstream commit 43853e843aa6c3d47ff2b0cce898318839483d05 ]

Remove a redundant node from the Pine64 Pinebook Pro dts, which is intended
to provide a value for the delay in PCI Express enumeration, but that isn't
supported without additional out-of-tree kernel patches.

There were already efforts to upstream those kernel patches, because they
reportedly make some PCI Express cards (such as LSI SAS HBAs) usable in
Pine64 RockPro64 (which is also based on the RK3399);  otherwise, those PCI
Express cards fail to enumerate.  However, providing the required background
and explanations proved to be a tough nut to crack, which is the reason why
those patches remain outside of the kernel mainline for now.

If those out-of-tree patches eventually become upstreamed, the resulting
device-tree changes will almost surely belong to the RK3399 SoC dtsi.  Also,
the above-mentioned unusable-without-out-of-tree-patches PCI Express devices
are in all fairness not usable in a Pinebook Pro without some extensive
hardware modifications, which is another reason to delete this redundant
node.  When it comes to the Pinebook Pro, only M.2 NVMe SSDs can be installed
out of the box (using an additional passive adapter PCB sold separately by
Pine64), which reportedly works fine with no additional patches.

Fixes: 5a65505a69 ("arm64: dts: rockchip: Add initial support for Pinebook Pro")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/0f82c3f97cb798d012270d13b34d8d15305ef293.1711923520.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:31 +02:00
Quentin Schulz 11c51d2944 arm64: dts: rockchip: enable internal pull-up on PCIE_WAKE# for RK3399 Puma
[ Upstream commit 945a7c8570916650a415757d15d83e0fa856a686 ]

The PCIE_WAKE# has a diode used as a level-shifter, and is used as an
input pin. While the SoC default is to enable the pull-up, the core
rk3399 pinconf for this pin opted for pull-none. So as to not disturb
the behaviour of other boards which may rely on pull-none instead of
pull-up, set the needed pull-up only for RK3399 Puma.

Fixes: 60fd9f72ce ("arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM")
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240308-puma-diode-pu-v2-2-309f83da110a@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:31 +02:00
Iskander Amara 6eb4c12f11 arm64: dts: rockchip: fix alphabetical ordering RK3399 puma
[ Upstream commit f0abb4b2c7acf3c3e4130dc3f54cd90cf2ae62bc ]

Nodes overridden by their reference should be ordered alphabetically to
make it easier to read the DTS. pinctrl node is defined in the wrong
location so let's reorder it.

Signed-off-by: Iskander Amara <iskander.amara@theobroma-systems.com>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240308085243.69903-2-iskander.amara@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Stable-dep-of: 945a7c857091 ("arm64: dts: rockchip: enable internal pull-up on PCIE_WAKE# for RK3399 Puma")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:30 +02:00
Quentin Schulz 5fa8b9f97b arm64: dts: rockchip: enable internal pull-up on Q7_USB_ID for RK3399 Puma
[ Upstream commit e6b1168f37e3f86d9966276c5a3fff9eb0df3e5f ]

The Q7_USB_ID has a diode used as a level-shifter, and is used as an
input pin. The SoC default for this pin is a pull-up, which is correct
but the pinconf in the introducing commit missed that, so let's fix this
oversight.

Fixes: ed2c66a95c ("arm64: dts: rockchip: fix rk3399-puma-haikou USB OTG mode")
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240308-puma-diode-pu-v2-1-309f83da110a@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:30 +02:00
Arınç ÜNAL 82fe6445df arm64: dts: rockchip: set PHY address of MT7531 switch to 0x1f
[ Upstream commit a2ac2a1b02590a22a236c43c455f421cdede45f5 ]

The MT7531 switch listens on PHY address 0x1f on an MDIO bus. I've got two
findings that support this. There's no bootstrapping option to change the
PHY address of the switch. The Linux driver hardcodes 0x1f as the PHY
address of the switch. So the reg property on the device tree is currently
ignored by the Linux driver.

Therefore, describe the correct PHY address on Banana Pi BPI-R2 Pro that
has this switch.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Fixes: c1804463e5 ("arm64: dts: rockchip: Add mt7531 dsa node to BPI-R2-Pro board")
Link: https://lore.kernel.org/r/20240314-for-rockchip-mt7531-phy-address-v1-1-743b5873358f@arinc9.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:30 +02:00
Yaraslau Furman 4fb8d6e8e2 HID: logitech-dj: allow mice to use all types of reports
[ Upstream commit 21f28a7eb78dea6c59be6b0a5e0b47bf3d25fcbb ]

You can bind whatever action you want to the mouse's reprogrammable
buttons using Windows application. Allow Linux to receive multimedia keycodes.

Fixes: 3ed224e273 ("HID: logitech-dj: Fix 064d:c52f receiver support")
Signed-off-by: Yaraslau Furman <yaro330@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:30 +02:00
Zhang Lixu b7e3f0cbe1 HID: intel-ish-hid: ipc: Fix dev_err usage with uninitialized dev->devc
[ Upstream commit 92826905ae340b7f2b25759a06c8c60bfc476b9f ]

The variable dev->devc in ish_dev_init was utilized by dev_err before it
was properly assigned. To rectify this, the assignment of dev->devc has
been moved to immediately follow memory allocation.

Without this change "(NULL device *)" is printed for device information.

Fixes: 8ae2f2b0a2 ("HID: intel-ish-hid: ipc: Fix potential use-after-free in work function")
Fixes: ae02e5d40d ("HID: intel-ish-hid: ipc layer")
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:30 +02:00
Takayuki Nagata fc1860a1bf cifs: reinstate original behavior again for forceuid/forcegid
[ Upstream commit 77d8aa79ecfb209308e0644c02f655122b31def7 ]

forceuid/forcegid should be enabled by default when uid=/gid= options are
specified, but commit 24e0a1eff9 ("cifs: switch to new mount api")
changed the behavior. Due to the change, a mounted share does not show
intentional uid/gid for files and directories even though uid=/gid=
options are specified since forceuid/forcegid are not enabled.

This patch reinstates original behavior that overrides uid/gid with
specified uid/gid by the options.

Fixes: 24e0a1eff9 ("cifs: switch to new mount api")
Signed-off-by: Takayuki Nagata <tnagata@redhat.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:30 +02:00
Paulo Alcantara 551496743a smb: client: fix rename(2) regression against samba
[ Upstream commit 18d86965e31f9be4d477da0744a7cdc9815858de ]

After commit 2c7d399e551c ("smb: client: reuse file lease key in
compound operations") the client started reusing lease keys for
rename, unlink and set path size operations to prevent it from
breaking its own leases and thus causing unnecessary lease breaks to
same connection.

The implementation relies on positive dentries and
cifsInodeInfo::lease_granted to decide whether reusing lease keys for
the compound requests.  cifsInodeInfo::lease_granted was introduced by
commit 0ab95c2510 ("Defer close only when lease is enabled.") to
indicate whether lease caching is granted for a specific file, but
that can only happen until file is open, so
cifsInodeInfo::lease_granted was left uninitialised in ->alloc_inode
and then client started sending random lease keys for files that
hadn't any leases.

This fixes the following test case against samba:

mount.cifs //srv/share /mnt/1 -o ...,nosharesock
mount.cifs //srv/share /mnt/2 -o ...,nosharesock
touch /mnt/1/foo; tail -f /mnt/1/foo & pid=$!
mv /mnt/2/foo /mnt/2/bar # fails with -EIO
kill $pid

Fixes: 0ab95c2510 ("Defer close only when lease is enabled.")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:30 +02:00
David Howells 4a5c16d065 cifs: Fix reacquisition of volume cookie on still-live connection
[ Upstream commit dad80c6bff770d25f67ec25fe011730e4a463008 ]

During mount, cifs_mount_get_tcon() gets a tcon resource connection record
and then attaches an fscache volume cookie to it.  However, it does this
irrespective of whether or not the tcon returned from cifs_get_tcon() is a
new record or one that's already in use.  This leads to a warning about a
volume cookie collision and a leaked volume cookie because tcon->fscache
gets reset.

Fix this be adding a mutex and a "we've already tried this" flag and only
doing it once for the lifetime of the tcon.

[!] Note: Looking at cifs_mount_get_tcon(), a more general solution may
actually be required.  Reacquiring the volume cookie isn't the only thing
that function does: it also partially reinitialises the tcon record without
any locking - which may cause live filesystem ops already using the tcon
through a previous mount to malfunction.

This can be reproduced simply by something like:

    mount //example.com/test /xfstest.test -o user=shares,pass=xxx,fsc
    mount //example.com/test /mnt -o user=shares,pass=xxx,fsc

Fixes: 70431bfd82 ("cifs: Support fscache indexing rewrite")
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02 16:32:30 +02:00
Greg Kroah-Hartman a3463f0810 Linux 6.6.29
Link: https://lore.kernel.org/r/20240423213855.696477232@linuxfoundation.org
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: kernelci.org bot <bot@kernelci.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:44 +02:00
Oleg Nesterov 63cc4f14bb selftests: kselftest: Fix build failure with NOLIBC
commit 16767502aa990cca2cb7d1372b31d328c4c85b40 upstream.

As Mark explains ksft_min_kernel_version() can't be compiled with nolibc,
it doesn't implement uname().

Fixes: 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()")
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240412123536.GA32444@redhat.com
Closes: https://lore.kernel.org/all/f0523b3a-ea08-4615-b0fb-5b504a2d39df@sirena.org.uk/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:44 +02:00
Mika Westerberg c67f926ec8 thunderbolt: Reset only non-USB4 host routers in resume
commit 8cf9926c537ce8b0c7783afebe752e084765d553 upstream.

There is no need to reset the USB4 host routers on resume because they
are reset already and this may cause problems if the link does not come
up soon enough. For this reason limit this to happen in non-USB4 host
routers only (that's Apple systems with Intel Thunderbolt controllers).

Fixes: 59a54c5f3dbd ("thunderbolt: Reset topology created by the boot firmware")
Cc: Sanath S <Sanath.S@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:44 +02:00
Johan Hovold b0f4478838 PCI/ASPM: Fix deadlock when enabling ASPM
commit 1e560864159d002b453da42bd2c13a1805515a20 upstream.

A last minute revert in 6.7-final introduced a potential deadlock when
enabling ASPM during probe of Qualcomm PCIe controllers as reported by
lockdep:

  ============================================
  WARNING: possible recursive locking detected
  6.7.0 #40 Not tainted
  --------------------------------------------
  kworker/u16:5/90 is trying to acquire lock:
  ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc

              but task is already holding lock:
  ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc

              other info that might help us debug this:
   Possible unsafe locking scenario:

         CPU0
         ----
    lock(pci_bus_sem);
    lock(pci_bus_sem);

               *** DEADLOCK ***

  Call trace:
   print_deadlock_bug+0x25c/0x348
   __lock_acquire+0x10a4/0x2064
   lock_acquire+0x1e8/0x318
   down_read+0x60/0x184
   pcie_aspm_pm_state_change+0x58/0xdc
   pci_set_full_power_state+0xa8/0x114
   pci_set_power_state+0xc4/0x120
   qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom]
   pci_walk_bus+0x64/0xbc
   qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom]

The deadlock can easily be reproduced on machines like the Lenovo ThinkPad
X13s by adding a delay to increase the race window during asynchronous
probe where another thread can take a write lock.

Add a new pci_set_power_state_locked() and associated helper functions that
can be called with the PCI bus semaphore held to avoid taking the read lock
twice.

Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com
Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org
Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org>	# 6.7
[bhelgaas: backported to v6.6.y, which contains 8cc22ba3f7 ("Revert
 "PCI/ASPM: Remove pcie_aspm_pm_state_change()""), a backport of
 f93e71aea6c6.  This omits the drivers/pci/controller/dwc/pcie-qcom.c hunk
 that updates qcom_pcie_enable_aspm(), which was added by 9f4f3dfad8cf
 ("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops"), which is not
 present in v6.6.28.]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:44 +02:00
Namjae Jeon 3b62923977 ksmbd: common: use struct_group_attr instead of struct_group for network_open_info
commit 0268a7cc7fdc47d90b6c18859de7718d5059f6f1 upstream.

4byte padding cause the connection issue with the applications of MacOS.
smb2_close response size increases by 4 bytes by padding, And the smb
client of MacOS check it and stop the connection. This patch use
struct_group_attr instead of struct_group for network_open_info to use
 __packed to avoid padding.

Fixes: 0015eb6e1238 ("smb: client, common: fix fortify warnings")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:44 +02:00
Marios Makassikis 4cbb88351b ksmbd: clear RENAME_NOREPLACE before calling vfs_rename
commit 4973b04d3ea577db80c501c5f14e68ec69fe1794 upstream.

File overwrite case is explicitly handled, so it is not necessary to
pass RENAME_NOREPLACE to vfs_rename.

Clearing the flag fixes rename operations when the share is a ntfs-3g
mount. The latter uses an older version of fuse with no support for
flags in the ->rename op.

Cc: stable@vger.kernel.org
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:44 +02:00
Namjae Jeon 5c20b242d4 ksmbd: validate request buffer size in smb2_allocate_rsp_buf()
commit 17cf0c2794bdb6f39671265aa18aea5c22ee8c4a upstream.

The response buffer should be allocated in smb2_allocate_rsp_buf
before validating request. But the fields in payload as well as smb2 header
is used in smb2_allocate_rsp_buf(). This patch add simple buffer size
validation to avoid potencial out-of-bounds in request buffer.

Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:44 +02:00
Namjae Jeon 3160d97344 ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf
commit c119f4ede3fa90a9463f50831761c28f989bfb20 upstream.

If ->ProtocolId is SMB2_TRANSFORM_PROTO_NUM, smb2 request size
validation could be skipped. if request size is smaller than
sizeof(struct smb2_query_info_req), slab-out-of-bounds read can happen in
smb2_allocate_rsp_buf(). This patch allocate response buffer after
decrypting transform request. smb3_decrypt_req() will validate transform
request size and avoid slab-out-of-bound in smb2_allocate_rsp_buf().

Reported-by: Norbert Szetei <norbert@doyensec.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:43 +02:00
Naveen N Rao 6355b468e2 powerpc/ftrace: Ignore ftrace locations in exit text sections
commit ea73179e64131bcd29ba6defd33732abdf8ca14b upstream.

Michael reported that we are seeing an ftrace bug on bootup when KASAN
is enabled and we are using -fpatchable-function-entry:

  ftrace: allocating 47780 entries in 18 pages
  ftrace-powerpc: 0xc0000000020b3d5c: No module provided for non-kernel address
  ------------[ ftrace bug ]------------
  ftrace faulted on modifying
  [<c0000000020b3d5c>] 0xc0000000020b3d5c
  Initializing ftrace call sites
  ftrace record flags: 0
   (0)
   expected tramp: c00000000008cef4
  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2180 ftrace_bug+0x3c0/0x424
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rc3-00120-g0f71dcfb4aef #860
  Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
  NIP:  c0000000003aa81c LR: c0000000003aa818 CTR: 0000000000000000
  REGS: c0000000033cfab0 TRAP: 0700   Not tainted  (6.5.0-rc3-00120-g0f71dcfb4aef)
  MSR:  8000000002021033 <SF,VEC,ME,IR,DR,RI,LE>  CR: 28028240  XER: 00000000
  CFAR: c0000000002781a8 IRQMASK: 3
  ...
  NIP [c0000000003aa81c] ftrace_bug+0x3c0/0x424
  LR [c0000000003aa818] ftrace_bug+0x3bc/0x424
  Call Trace:
   ftrace_bug+0x3bc/0x424 (unreliable)
   ftrace_process_locs+0x5f4/0x8a0
   ftrace_init+0xc0/0x1d0
   start_kernel+0x1d8/0x484

With CONFIG_FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY=y and
CONFIG_KASAN=y, compiler emits nops in functions that it generates for
registering and unregistering global variables (unlike with -pg and
-mprofile-kernel where calls to _mcount() are not generated in those
functions). Those functions then end up in INIT_TEXT and EXIT_TEXT
respectively. We don't expect to see any profiled functions in
EXIT_TEXT, so ftrace_init_nop() assumes that all addresses that aren't
in the core kernel text belongs to a module. Since these functions do
not match that criteria, we see the above bug.

Address this by having ftrace ignore all locations in the text exit
sections of vmlinux.

Fixes: 0f71dcfb4a ("powerpc/ftrace: Add support for -fpatchable-function-entry")
Cc: stable@vger.kernel.org # v6.6+
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240213175410.1091313-1-naveen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:43 +02:00
Breno Leitao 43a71c1b4b virtio_net: Do not send RSS key if it is not supported
commit 059a49aa2e25c58f90b50151f109dd3c4cdb3a47 upstream.

There is a bug when setting the RSS options in virtio_net that can break
the whole machine, getting the kernel into an infinite loop.

Running the following command in any QEMU virtual machine with virtionet
will reproduce this problem:

    # ethtool -X eth0  hfunc toeplitz

This is how the problem happens:

1) ethtool_set_rxfh() calls virtnet_set_rxfh()

2) virtnet_set_rxfh() calls virtnet_commit_rss_command()

3) virtnet_commit_rss_command() populates 4 entries for the rss
scatter-gather

4) Since the command above does not have a key, then the last
scatter-gatter entry will be zeroed, since rss_key_size == 0.
sg_buf_size = vi->rss_key_size;

5) This buffer is passed to qemu, but qemu is not happy with a buffer
with zero length, and do the following in virtqueue_map_desc() (QEMU
function):

  if (!sz) {
      virtio_error(vdev, "virtio: zero sized buffers are not allowed");

6) virtio_error() (also QEMU function) set the device as broken

    vdev->broken = true;

7) Qemu bails out, and do not repond this crazy kernel.

8) The kernel is waiting for the response to come back (function
virtnet_send_command())

9) The kernel is waiting doing the following :

      while (!virtqueue_get_buf(vi->cvq, &tmp) &&
	     !virtqueue_is_broken(vi->cvq))
	      cpu_relax();

10) None of the following functions above is true, thus, the kernel
loops here forever. Keeping in mind that virtqueue_is_broken() does
not look at the qemu `vdev->broken`, so, it never realizes that the
vitio is broken at QEMU side.

Fix it by not sending RSS commands if the feature is not available in
the device.

Fixes: c7114b1249 ("drivers/net/virtio_net: Added basic RSS support.")
Cc: stable@vger.kernel.org
Cc: qemu-devel@nongnu.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Vlad Poenaru <vlad.wing@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:43 +02:00
Arınç ÜNAL bd41ee1efd net: dsa: mt7530: fix enabling EEE on MT7531 switch on all boards
commit 06dfcd4098cfdc4d4577d94793a4f9125386da8b upstream.

The commit 40b5d2f15c ("net: dsa: mt7530: Add support for EEE features")
brought EEE support but did not enable EEE on MT7531 switch MACs. EEE is
enabled on MT7531 switch MACs by pulling the LAN2LED0 pin low on the board
(bootstrapping), unsetting the EEE_DIS bit on the trap register, or setting
the internal EEE switch bit on the CORE_PLL_GROUP4 register. Thanks to
SkyLake Huang (黃啟澤) from MediaTek for providing information on the
internal EEE switch bit.

There are existing boards that were not designed to pull the pin low.
Because of that, the EEE status currently depends on the board design.

The EEE_DIS bit on the trap pertains to the LAN2LED0 pin which is usually
used to control an LED. Once the bit is unset, the pin will be low. That
will make the active low LED turn on. The pin is controlled by the switch
PHY. It seems that the PHY controls the pin in the way that it inverts the
pin state. That means depending on the wiring of the LED connected to
LAN2LED0 on the board, the LED may be on without an active link.

To not cause this unwanted behaviour whilst enabling EEE on all boards, set
the internal EEE switch bit on the CORE_PLL_GROUP4 register.

My testing on MT7531 shows a certain amount of traffic loss when EEE is
enabled. That said, I haven't come across a board that enables EEE. So
enable EEE on the switch MACs but disable EEE advertisement on the switch
PHYs. This way, we don't change the behaviour of the majority of the boards
that have this switch. The mediatek-ge PHY driver already disables EEE
advertisement on the switch PHYs but my testing shows that it is somehow
enabled afterwards. Disabling EEE advertisement before the PHY driver
initialises keeps it off.

With this change, EEE can now be enabled using ethtool.

Fixes: 40b5d2f15c ("net: dsa: mt7530: Add support for EEE features")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240408-for-net-mt7530-fix-eee-for-mt7531-mt7988-v3-1-84fdef1f008b@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:43 +02:00
Arınç ÜNAL 21b9d89d93 net: dsa: mt7530: fix improper frames on all 25MHz and 40MHz XTAL MT7530
commit 5f563c31ff0c40ce395d0bae7daa94c7950dac97 upstream.

The MT7530 switch after reset initialises with a core clock frequency that
works with a 25MHz XTAL connected to it. For 40MHz XTAL, the core clock
frequency must be set to 500MHz.

The mt7530_pll_setup() function is responsible of setting the core clock
frequency. Currently, it runs on MT7530 with 25MHz and 40MHz XTAL. This
causes MT7530 switch with 25MHz XTAL to egress and ingress frames
improperly.

Introduce a check to run it only on MT7530 with 40MHz XTAL.

The core clock frequency is set by writing to a switch PHY's register.
Access to the PHY's register is done via the MDIO bus the switch is also
on. Therefore, it works only when the switch makes switch PHYs listen on
the MDIO bus the switch is on. This is controlled either by the state of
the ESW_P1_LED_1 pin after reset deassertion or modifying bit 5 of the
modifiable trap register.

When ESW_P1_LED_1 is pulled high, PHY indirect access is used. That means
accessing PHY registers via the PHY indirect access control register of the
switch.

When ESW_P1_LED_1 is pulled low, PHY direct access is used. That means
accessing PHY registers via the MDIO bus the switch is on.

For MT7530 switch with 40MHz XTAL on a board with ESW_P1_LED_1 pulled high,
the core clock frequency won't be set to 500MHz, causing the switch to
egress and ingress frames improperly.

Run mt7530_pll_setup() after PHY direct access is set on the modifiable
trap register.

With these two changes, all MT7530 switches with 25MHz and 40MHz, and
P1_LED_1 pulled high or low, will egress and ingress frames properly.

Link: 4a5dd143f2/linux-mt/drivers/net/ethernet/mediatek/gsw_mt7623.c (L1039)
Fixes: b8f126a8d5 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20240320-for-net-mt7530-fix-25mhz-xtal-with-direct-phy-access-v1-1-d92f605f1160@arinc9.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:43 +02:00
Jeongjun Park 2382eae66b nilfs2: fix OOB in nilfs_set_de_type
commit c4a7dc9523b59b3e73fd522c73e95e072f876b16 upstream.

The size of the nilfs_type_by_mode array in the fs/nilfs2/dir.c file is
defined as "S_IFMT >> S_SHIFT", but the nilfs_set_de_type() function,
which uses this array, specifies the index to read from the array in the
same way as "(mode & S_IFMT) >> S_SHIFT".

static void nilfs_set_de_type(struct nilfs_dir_entry *de, struct inode
 *inode)
{
	umode_t mode = inode->i_mode;

	de->file_type = nilfs_type_by_mode[(mode & S_IFMT)>>S_SHIFT]; // oob
}

However, when the index is determined this way, an out-of-bounds (OOB)
error occurs by referring to an index that is 1 larger than the array size
when the condition "mode & S_IFMT == S_IFMT" is satisfied.  Therefore, a
patch to resize the nilfs_type_by_mode array should be applied to prevent
OOB errors.

Link: https://lkml.kernel.org/r/20240415182048.7144-1-konishi.ryusuke@gmail.com
Reported-by: syzbot+2e22057de05b9f3b30d8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2e22057de05b9f3b30d8
Fixes: 2ba466d74e ("nilfs2: directory entry operations")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:43 +02:00
Qiang Zhang e46d3be714 bootconfig: use memblock_free_late to free xbc memory to buddy
commit 89f9a1e876b5a7ad884918c03a46831af202c8a0 upstream.

On the time to free xbc memory in xbc_exit(), memblock may has handed
over memory to buddy allocator. So it doesn't make sense to free memory
back to memblock. memblock_free() called by xbc_exit() even causes UAF bugs
on architectures with CONFIG_ARCH_KEEP_MEMBLOCK disabled like x86.
Following KASAN logs shows this case.

This patch fixes the xbc memory free problem by calling memblock_free()
in early xbc init error rewind path and calling memblock_free_late() in
xbc exit path to free memory to buddy allocator.

[    9.410890] ==================================================================
[    9.418962] BUG: KASAN: use-after-free in memblock_isolate_range+0x12d/0x260
[    9.426850] Read of size 8 at addr ffff88845dd30000 by task swapper/0/1

[    9.435901] CPU: 9 PID: 1 Comm: swapper/0 Tainted: G     U             6.9.0-rc3-00208-g586b5dfb51b9 #5
[    9.446403] Hardware name: Intel Corporation RPLP LP5 (CPU:RaptorLake)/RPLP LP5 (ID:13), BIOS IRPPN02.01.01.00.00.19.015.D-00000000 Dec 28 2023
[    9.460789] Call Trace:
[    9.463518]  <TASK>
[    9.465859]  dump_stack_lvl+0x53/0x70
[    9.469949]  print_report+0xce/0x610
[    9.473944]  ? __virt_addr_valid+0xf5/0x1b0
[    9.478619]  ? memblock_isolate_range+0x12d/0x260
[    9.483877]  kasan_report+0xc6/0x100
[    9.487870]  ? memblock_isolate_range+0x12d/0x260
[    9.493125]  memblock_isolate_range+0x12d/0x260
[    9.498187]  memblock_phys_free+0xb4/0x160
[    9.502762]  ? __pfx_memblock_phys_free+0x10/0x10
[    9.508021]  ? mutex_unlock+0x7e/0xd0
[    9.512111]  ? __pfx_mutex_unlock+0x10/0x10
[    9.516786]  ? kernel_init_freeable+0x2d4/0x430
[    9.521850]  ? __pfx_kernel_init+0x10/0x10
[    9.526426]  xbc_exit+0x17/0x70
[    9.529935]  kernel_init+0x38/0x1e0
[    9.533829]  ? _raw_spin_unlock_irq+0xd/0x30
[    9.538601]  ret_from_fork+0x2c/0x50
[    9.542596]  ? __pfx_kernel_init+0x10/0x10
[    9.547170]  ret_from_fork_asm+0x1a/0x30
[    9.551552]  </TASK>

[    9.555649] The buggy address belongs to the physical page:
[    9.561875] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x45dd30
[    9.570821] flags: 0x200000000000000(node=0|zone=2)
[    9.576271] page_type: 0xffffffff()
[    9.580167] raw: 0200000000000000 ffffea0011774c48 ffffea0012ba1848 0000000000000000
[    9.588823] raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
[    9.597476] page dumped because: kasan: bad access detected

[    9.605362] Memory state around the buggy address:
[    9.610714]  ffff88845dd2ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    9.618786]  ffff88845dd2ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    9.626857] >ffff88845dd30000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.634930]                    ^
[    9.638534]  ffff88845dd30080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.646605]  ffff88845dd30100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.654675] ==================================================================

Link: https://lore.kernel.org/all/20240414114944.1012359-1-qiang4.zhang@linux.intel.com/

Fixes: 40caa127f3 ("init: bootconfig: Remove all bootconfig data when the init memory is removed")
Cc: Stable@vger.kernel.org
Signed-off-by: Qiang Zhang <qiang4.zhang@intel.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:43 +02:00
Dave Airlie a019b44b1b nouveau: fix instmem race condition around ptr stores
commit fff1386cc889d8fb4089d285f883f8cba62d82ce upstream.

Running a lot of VK CTS in parallel against nouveau, once every
few hours you might see something like this crash.

BUG: kernel NULL pointer dereference, address: 0000000000000008
PGD 8000000114e6e067 P4D 8000000114e6e067 PUD 109046067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 7 PID: 53891 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27
Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021
RIP: 0010:gp100_vmm_pgt_mem+0xe3/0x180 [nouveau]
Code: c7 48 01 c8 49 89 45 58 85 d2 0f 84 95 00 00 00 41 0f b7 46 12 49 8b 7e 08 89 da 42 8d 2c f8 48 8b 47 08 41 83 c7 01 48 89 ee <48> 8b 40 08 ff d0 0f 1f 00 49 8b 7e 08 48 89 d9 48 8d 75 04 48 c1
RSP: 0000:ffffac20c5857838 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 00000000004d8001 RCX: 0000000000000001
RDX: 00000000004d8001 RSI: 00000000000006d8 RDI: ffffa07afe332180
RBP: 00000000000006d8 R08: ffffac20c5857ad0 R09: 0000000000ffff10
R10: 0000000000000001 R11: ffffa07af27e2de0 R12: 000000000000001c
R13: ffffac20c5857ad0 R14: ffffa07a96fe9040 R15: 000000000000001c
FS:  00007fe395eed7c0(0000) GS:ffffa07e2c980000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000011febe001 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:

...

 ? gp100_vmm_pgt_mem+0xe3/0x180 [nouveau]
 ? gp100_vmm_pgt_mem+0x37/0x180 [nouveau]
 nvkm_vmm_iter+0x351/0xa20 [nouveau]
 ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau]
 ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau]
 ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau]
 ? __lock_acquire+0x3ed/0x2170
 ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau]
 nvkm_vmm_ptes_get_map+0xc2/0x100 [nouveau]
 ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau]
 ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau]
 nvkm_vmm_map_locked+0x224/0x3a0 [nouveau]

Adding any sort of useful debug usually makes it go away, so I hand
wrote the function in a line, and debugged the asm.

Every so often pt->memory->ptrs is NULL. This ptrs ptr is set in
the nv50_instobj_acquire called from nvkm_kmap.

If Thread A and Thread B both get to nv50_instobj_acquire around
the same time, and Thread A hits the refcount_set line, and in
lockstep thread B succeeds at refcount_inc_not_zero, there is a
chance the ptrs value won't have been stored since refcount_set
is unordered. Force a memory barrier here, I picked smp_mb, since
we want it on all CPUs and it's write followed by a read.

v2: use paired smp_rmb/smp_wmb.

Cc: <stable@vger.kernel.org>
Fixes: be55287aa5 ("drm/nouveau/imem/nv50: embed nvkm_instobj directly into nv04_instobj")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240411011510.2546857-1-airlied@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:43 +02:00
Zack Rusin 5d2f587aef drm/vmwgfx: Fix crtc's atomic check conditional
commit a60ccade88f926e871a57176e86a34bbf0db0098 upstream.

The conditional was supposed to prevent enabling of a crtc state
without a set primary plane. Accidently it also prevented disabling
crtc state with a set primary plane. Neither is correct.

Fix the conditional and just driver-warn when a crtc state has been
enabled without a primary plane which will help debug broken userspace.

Fixes IGT's kms_atomic_interruptible and kms_atomic_transition tests.

Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: 06ec41909e ("drm/vmwgfx: Add and connect CRTC helper functions")
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.12+
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412025511.78553-5-zack.rusin@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:43 +02:00
Zack Rusin f1769cb2c9 drm/vmwgfx: Sort primary plane formats by order of preference
commit d4c972bff3129a9dd4c22a3999fd8eba1a81531a upstream.

The table of primary plane formats wasn't sorted at all, leading to
applications picking our least desirable formats by defaults.

Sort the primary plane formats according to our order of preference.

Nice side-effect of this change is that it makes IGT's kms_atomic
plane-invalid-params pass because the test picks the first format
which for vmwgfx was DRM_FORMAT_XRGB1555 and uses fb's with odd sizes
which make Pixman, which IGT depends on assert due to the fact that our
16bpp formats aren't 32 bit aligned like Pixman requires all formats
to be.

Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: 36cc79bc90 ("drm/vmwgfx: Add universal plane support")
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.12+
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412025511.78553-6-zack.rusin@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:43 +02:00
Zack Rusin 65674218b4 drm/vmwgfx: Fix prime import/export
commit b32233accefff1338806f064fb9b62cf5bc0609f upstream.

vmwgfx never supported prime import of external buffers. Furthermore the
driver exposes two different objects to userspace: vmw_surface's and
gem buffers but prime import/export only worked with vmw_surfaces.

Because gem buffers are used through the dumb_buffer interface this meant
that the driver created buffers couldn't have been prime exported or
imported.

Fix prime import/export. Makes IGT's kms_prime pass.

Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: 8afa13a058 ("drm/vmwgfx: Implement DRIVER_GEM")
Cc: <stable@vger.kernel.org> # v6.6+
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412025511.78553-4-zack.rusin@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:42 +02:00
Christian König db74904a93 drm/amdgpu: remove invalid resource->start check v2
commit ca7c4507ba87e9fc22e0ecfa819c3664b3e8287b upstream.

The majority of those where removed in the commit aed01a6804
("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2")

But this one was missed because it's working on the resource and not the
BO. Since we also no longer use a fake start address for visible BOs
this will now trigger invalid mapping errors.

v2: also remove the unused variable

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: aed01a6804 ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2")
CC: stable@vger.kernel.org
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:42 +02:00
Felix Kuehling aa02d43367 drm/amdkfd: Fix memory leak in create_process failure
commit 18921b205012568b45760753ad3146ddb9e2d4e2 upstream.

Fix memory leak due to a leaked mmget reference on an error handling
code path that is triggered when attempting to create KFD processes
while a GPU reset is in progress.

Fixes: 0ab2d7532b ("drm/amdkfd: prepare per-process debug enable and disable")
CC: Xiaogang Chen <xiaogang.chen@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Harish Kasiviswanthan <Harish.Kasiviswanthan@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:42 +02:00
xinhui pan ef13eeca7c drm/amdgpu: validate the parameters of bo mapping operations more clearly
commit 6fef2d4c00b5b8561ad68dd2b68173f5c6af1e75 upstream.

Verify the parameters of
amdgpu_vm_bo_(map/replace_map/clearing_mappings) in one common place.

Fixes: dc54d3d174 ("drm/amdgpu: implement AMDGPU_VA_OP_CLEAR v2")
Cc: stable@vger.kernel.org
Reported-by: Vlad Stolyarov <hexed@google.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:42 +02:00
Danny Lin 885d4c31a4 fuse: fix leaked ENOSYS error on first statx call
commit eb4b691b9115fae4c844f5941418335575cf667f upstream.

FUSE attempts to detect server support for statx by trying it once and
setting no_statx=1 if it fails with ENOSYS, but consider the following
scenario:

- Userspace (e.g. sh) calls stat() on a file
  * succeeds
- Userspace (e.g. lsd) calls statx(BTIME) on the same file
  - request_mask = STATX_BASIC_STATS | STATX_BTIME
  - first pass: sync=true due to differing cache_mask
  - statx fails and returns ENOSYS
  - set no_statx and retry
  - retry sets mask = STATX_BASIC_STATS
  - now mask == cache_mask; sync=false (time_before: still valid)
  - so we take the "else if (stat)" path
  - "err" is still ENOSYS from the failed statx call

Fix this by zeroing "err" before retrying the failed call.

Fixes: d3045530bd ("fuse: implement statx")
Cc: stable@vger.kernel.org # v6.6
Signed-off-by: Danny Lin <danny@orbstack.dev>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:42 +02:00
Sumanth Korikkar cc10db0030 mm/shmem: inline shmem_is_huge() for disabled transparent hugepages
commit 1f737846aa3c45f07a06fa0d018b39e1afb8084a upstream.

In order to  minimize code size (CONFIG_CC_OPTIMIZE_FOR_SIZE=y),
compiler might choose to make a regular function call (out-of-line) for
shmem_is_huge() instead of inlining it. When transparent hugepages are
disabled (CONFIG_TRANSPARENT_HUGEPAGE=n), it can cause compilation
error.

mm/shmem.c: In function `shmem_getattr':
./include/linux/huge_mm.h:383:27: note: in expansion of macro `BUILD_BUG'
  383 | #define HPAGE_PMD_SIZE ({ BUILD_BUG(); 0; })
      |                           ^~~~~~~~~
mm/shmem.c:1148:33: note: in expansion of macro `HPAGE_PMD_SIZE'
 1148 |                 stat->blksize = HPAGE_PMD_SIZE;

To prevent the possible error, always inline shmem_is_huge() when
transparent hugepages are disabled.

Link: https://lkml.kernel.org/r/20240409155407.2322714-1-sumanthk@linux.ibm.com
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:42 +02:00
Miaohe Lin 882e1180c8 mm/memory-failure: fix deadlock when hugetlb_optimize_vmemmap is enabled
commit 1983184c22dd84a4d95a71e5c6775c2638557dc7 upstream.

When I did hard offline test with hugetlb pages, below deadlock occurs:

======================================================
WARNING: possible circular locking dependency detected
6.8.0-11409-gf6cef5f8c37f #1 Not tainted
------------------------------------------------------
bash/46904 is trying to acquire lock:
ffffffffabe68910 (cpu_hotplug_lock){++++}-{0:0}, at: static_key_slow_dec+0x16/0x60

but task is already holding lock:
ffffffffabf92ea8 (pcp_batch_high_lock){+.+.}-{3:3}, at: zone_pcp_disable+0x16/0x40

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (pcp_batch_high_lock){+.+.}-{3:3}:
       __mutex_lock+0x6c/0x770
       page_alloc_cpu_online+0x3c/0x70
       cpuhp_invoke_callback+0x397/0x5f0
       __cpuhp_invoke_callback_range+0x71/0xe0
       _cpu_up+0xeb/0x210
       cpu_up+0x91/0xe0
       cpuhp_bringup_mask+0x49/0xb0
       bringup_nonboot_cpus+0xb7/0xe0
       smp_init+0x25/0xa0
       kernel_init_freeable+0x15f/0x3e0
       kernel_init+0x15/0x1b0
       ret_from_fork+0x2f/0x50
       ret_from_fork_asm+0x1a/0x30

-> #0 (cpu_hotplug_lock){++++}-{0:0}:
       __lock_acquire+0x1298/0x1cd0
       lock_acquire+0xc0/0x2b0
       cpus_read_lock+0x2a/0xc0
       static_key_slow_dec+0x16/0x60
       __hugetlb_vmemmap_restore_folio+0x1b9/0x200
       dissolve_free_huge_page+0x211/0x260
       __page_handle_poison+0x45/0xc0
       memory_failure+0x65e/0xc70
       hard_offline_page_store+0x55/0xa0
       kernfs_fop_write_iter+0x12c/0x1d0
       vfs_write+0x387/0x550
       ksys_write+0x64/0xe0
       do_syscall_64+0xca/0x1e0
       entry_SYSCALL_64_after_hwframe+0x6d/0x75

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(pcp_batch_high_lock);
                               lock(cpu_hotplug_lock);
                               lock(pcp_batch_high_lock);
  rlock(cpu_hotplug_lock);

 *** DEADLOCK ***

5 locks held by bash/46904:
 #0: ffff98f6c3bb23f0 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x64/0xe0
 #1: ffff98f6c328e488 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xf8/0x1d0
 #2: ffff98ef83b31890 (kn->active#113){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x100/0x1d0
 #3: ffffffffabf9db48 (mf_mutex){+.+.}-{3:3}, at: memory_failure+0x44/0xc70
 #4: ffffffffabf92ea8 (pcp_batch_high_lock){+.+.}-{3:3}, at: zone_pcp_disable+0x16/0x40

stack backtrace:
CPU: 10 PID: 46904 Comm: bash Kdump: loaded Not tainted 6.8.0-11409-gf6cef5f8c37f #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x68/0xa0
 check_noncircular+0x129/0x140
 __lock_acquire+0x1298/0x1cd0
 lock_acquire+0xc0/0x2b0
 cpus_read_lock+0x2a/0xc0
 static_key_slow_dec+0x16/0x60
 __hugetlb_vmemmap_restore_folio+0x1b9/0x200
 dissolve_free_huge_page+0x211/0x260
 __page_handle_poison+0x45/0xc0
 memory_failure+0x65e/0xc70
 hard_offline_page_store+0x55/0xa0
 kernfs_fop_write_iter+0x12c/0x1d0
 vfs_write+0x387/0x550
 ksys_write+0x64/0xe0
 do_syscall_64+0xca/0x1e0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75
RIP: 0033:0x7fc862314887
Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007fff19311268 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007fc862314887
RDX: 000000000000000c RSI: 000056405645fe10 RDI: 0000000000000001
RBP: 000056405645fe10 R08: 00007fc8623d1460 R09: 000000007fffffff
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c
R13: 00007fc86241b780 R14: 00007fc862417600 R15: 00007fc862416a00

In short, below scene breaks the lock dependency chain:

 memory_failure
  __page_handle_poison
   zone_pcp_disable -- lock(pcp_batch_high_lock)
   dissolve_free_huge_page
    __hugetlb_vmemmap_restore_folio
     static_key_slow_dec
      cpus_read_lock -- rlock(cpu_hotplug_lock)

Fix this by calling drain_all_pages() instead.

This issue won't occur until commit a6b40850c4 ("mm: hugetlb: replace
hugetlb_free_vmemmap_enabled with a static_key").  As it introduced
rlock(cpu_hotplug_lock) in dissolve_free_huge_page() code path while
lock(pcp_batch_high_lock) is already in the __page_handle_poison().

[linmiaohe@huawei.com: extend comment per Oscar]
[akpm@linux-foundation.org: reflow block comment]
Link: https://lkml.kernel.org/r/20240407085456.2798193-1-linmiaohe@huawei.com
Fixes: a6b40850c4 ("mm: hugetlb: replace hugetlb_free_vmemmap_enabled with a static_key")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:42 +02:00
Oscar Salvador c85106fb08 mm,swapops: update check in is_pfn_swap_entry for hwpoison entries
commit 07a57a338adb6ec9e766d6a6790f76527f45ceb5 upstream.

Tony reported that the Machine check recovery was broken in v6.9-rc1, as
he was hitting a VM_BUG_ON when injecting uncorrectable memory errors to
DRAM.

After some more digging and debugging on his side, he realized that this
went back to v6.1, with the introduction of 'commit 0d206b5d2e
("mm/swap: add swp_offset_pfn() to fetch PFN from swap entry")'.  That
commit, among other things, introduced swp_offset_pfn(), replacing
hwpoison_entry_to_pfn() in its favour.

The patch also introduced a VM_BUG_ON() check for is_pfn_swap_entry(), but
is_pfn_swap_entry() never got updated to cover hwpoison entries, which
means that we would hit the VM_BUG_ON whenever we would call
swp_offset_pfn() for such entries on environments with CONFIG_DEBUG_VM
set.  Fix this by updating the check to cover hwpoison entries as well,
and update the comment while we are it.

Link: https://lkml.kernel.org/r/20240407130537.16977-1-osalvador@suse.de
Fixes: 0d206b5d2e ("mm/swap: add swp_offset_pfn() to fetch PFN from swap entry")
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reported-by: Tony Luck <tony.luck@intel.com>
Closes: https://lore.kernel.org/all/Zg8kLSl2yAlA3o5D@agluck-desk3/
Tested-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: <stable@vger.kernel.org>	[6.1.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:42 +02:00
Peter Xu db01bfbddd mm/userfaultfd: allow hugetlb change protection upon poison entry
commit c5977c95dff182d6ee06f4d6f60bcb0284912969 upstream.

After UFFDIO_POISON, there can be two kinds of hugetlb pte markers, either
the POISON one or UFFD_WP one.

Allow change protection to run on a poisoned marker just like !hugetlb
cases, ignoring the marker irrelevant of the permission.

Here the two bits are mutual exclusive.  For example, when install a
poisoned entry it must not be UFFD_WP already (by checking pte_none()
before such install).  And it also means if UFFD_WP is set there must have
no POISON bit set.  It makes sense because UFFD_WP is a bit to reflect
permission, and permissions do not apply if the pte is poisoned and
destined to sigbus.

So here we simply check uffd_wp bit set first, do nothing otherwise.

Attach the Fixes to UFFDIO_POISON work, as before that it should not be
possible to have poison entry for hugetlb (e.g., hugetlb doesn't do swap,
so no chance of swapin errors).

Link: https://lkml.kernel.org/r/20240405231920.1772199-1-peterx@redhat.com
Link: https://lore.kernel.org/r/000000000000920d5e0615602dd1@google.com
Fixes: fc71884a5f ("mm: userfaultfd: add new UFFDIO_POISON ioctl")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: syzbot+b07c8ac8eee3d4d8440f@syzkaller.appspotmail.com
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: <stable@vger.kernel.org>	[6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:42 +02:00
Yuntao Wang 81cf85ae4f init/main.c: Fix potential static_command_line memory overflow
commit 46dad3c1e57897ab9228332f03e1c14798d2d3b9 upstream.

We allocate memory of size 'xlen + strlen(boot_command_line) + 1' for
static_command_line, but the strings copied into static_command_line are
extra_command_line and command_line, rather than extra_command_line and
boot_command_line.

When strlen(command_line) > strlen(boot_command_line), static_command_line
will overflow.

This patch just recovers strlen(command_line) which was miss-consolidated
with strlen(boot_command_line) in the commit f5c7310ac7 ("init/main: add
checks for the return value of memblock_alloc*()")

Link: https://lore.kernel.org/all/20240412081733.35925-2-ytcoode@gmail.com/

Fixes: f5c7310ac7 ("init/main: add checks for the return value of memblock_alloc*()")
Cc: stable@vger.kernel.org
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:41 +02:00
Yaxiong Tian 31f815cb43 arm64: hibernate: Fix level3 translation fault in swsusp_save()
commit 50449ca66cc5a8cbc64749cf4b9f3d3fc5f4b457 upstream.

On arm64 machines, swsusp_save() faults if it attempts to access
MEMBLOCK_NOMAP memory ranges. This can be reproduced in QEMU using UEFI
when booting with rodata=off debug_pagealloc=off and CONFIG_KFENCE=n:

  Unable to handle kernel paging request at virtual address ffffff8000000000
  Mem abort info:
    ESR = 0x0000000096000007
    EC = 0x25: DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
    FSC = 0x07: level 3 translation fault
  Data abort info:
    ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
    CM = 0, WnR = 0, TnD = 0, TagAccess = 0
    GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
  swapper pgtable: 4k pages, 39-bit VAs, pgdp=00000000eeb0b000
  [ffffff8000000000] pgd=180000217fff9803, p4d=180000217fff9803, pud=180000217fff9803, pmd=180000217fff8803, pte=0000000000000000
  Internal error: Oops: 0000000096000007 [#1] SMP
  Internal error: Oops: 0000000096000007 [#1] SMP
  Modules linked in: xt_multiport ipt_REJECT nf_reject_ipv4 xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_filter bpfilter rfkill at803x snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg dwmac_generic stmmac_platform snd_hda_codec stmmac joydev pcs_xpcs snd_hda_core phylink ppdev lp parport ramoops reed_solomon ip_tables x_tables nls_iso8859_1 vfat multipath linear amdgpu amdxcp drm_exec gpu_sched drm_buddy hid_generic usbhid hid radeon video drm_suballoc_helper drm_ttm_helper ttm i2c_algo_bit drm_display_helper cec drm_kms_helper drm
  CPU: 0 PID: 3663 Comm: systemd-sleep Not tainted 6.6.2+ #76
  Source Version: 4e22ed63a0a48e7a7cff9b98b7806d8d4add7dc0
  Hardware name: Greatwall GW-XXXXXX-XXX/GW-XXXXXX-XXX, BIOS KunLun BIOS V4.0 01/19/2021
  pstate: 600003c5 (nZCv DAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc : swsusp_save+0x280/0x538
  lr : swsusp_save+0x280/0x538
  sp : ffffffa034a3fa40
  x29: ffffffa034a3fa40 x28: ffffff8000001000 x27: 0000000000000000
  x26: ffffff8001400000 x25: ffffffc08113e248 x24: 0000000000000000
  x23: 0000000000080000 x22: ffffffc08113e280 x21: 00000000000c69f2
  x20: ffffff8000000000 x19: ffffffc081ae2500 x18: 0000000000000000
  x17: 6666662074736420 x16: 3030303030303030 x15: 3038666666666666
  x14: 0000000000000b69 x13: ffffff9f89088530 x12: 00000000ffffffea
  x11: 00000000ffff7fff x10: 00000000ffff7fff x9 : ffffffc08193f0d0
  x8 : 00000000000bffe8 x7 : c0000000ffff7fff x6 : 0000000000000001
  x5 : ffffffa0fff09dc8 x4 : 0000000000000000 x3 : 0000000000000027
  x2 : 0000000000000000 x1 : 0000000000000000 x0 : 000000000000004e
  Call trace:
   swsusp_save+0x280/0x538
   swsusp_arch_suspend+0x148/0x190
   hibernation_snapshot+0x240/0x39c
   hibernate+0xc4/0x378
   state_store+0xf0/0x10c
   kobj_attr_store+0x14/0x24

The reason is swsusp_save() -> copy_data_pages() -> page_is_saveable()
-> kernel_page_present() assuming that a page is always present when
can_set_direct_map() is false (all of rodata_full,
debug_pagealloc_enabled() and arm64_kfence_can_set_direct_map() false),
irrespective of the MEMBLOCK_NOMAP ranges. Such MEMBLOCK_NOMAP regions
should not be saved during hibernation.

This problem was introduced by changes to the pfn_valid() logic in
commit a7d9f306ba ("arm64: drop pfn_valid_within() and simplify
pfn_valid()").

Similar to other architectures, drop the !can_set_direct_map() check in
kernel_page_present() so that page_is_savable() skips such pages.

Fixes: a7d9f306ba ("arm64: drop pfn_valid_within() and simplify pfn_valid()")
Cc: <stable@vger.kernel.org> # 5.14.x
Suggested-by: Mike Rapoport <rppt@kernel.org>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: xiongxin <xiongxin@kylinos.cn>
Signed-off-by: xiongxin <xiongxin@kylinos.cn>
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Link: https://lore.kernel.org/r/20240417025248.386622-1-tianyaxiong@kylinos.cn
[catalin.marinas@arm.com: rework commit message]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27 17:11:41 +02:00