[ Upstream commit fbec4e7fed89b579f2483041fabf9650fb0dd6bc ]
smp_call_function always runs its callback in hard IRQ context, even on
PREEMPT_RT, where spinlocks can sleep. So we need to use a raw spinlock
for cgr_lock to ensure we aren't waiting on a sleeping task.
Although this bug has existed for a while, it was not apparent until
commit ef2a8d5478 ("net: dpaa: Adjust queue depth on rate change")
which invokes smp_call_function_single via qman_update_cgr_safe every
time a link goes up or down.
Fixes: 96f413f476 ("soc/fsl/qbman: fix issue in qman_delete_cgr_safe()")
CC: stable@vger.kernel.org
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Closes: https://lore.kernel.org/all/20230323153935.nofnjucqjqnz34ej@skbuf/
Reported-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Closes: https://lore.kernel.org/linux-arm-kernel/87wmsyvclu.fsf@pengutronix.de/
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Camelia Groza <camelia.groza@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 584c2a9184a33a40fceee838f856de3cffa19be3 ]
smp_call_function_single disables IRQs when executing the callback. To
prevent deadlocks, we must disable IRQs when taking cgr_lock elsewhere.
This is already done by qman_update_cgr and qman_delete_cgr; fix the
other lockers.
Fixes: 96f413f476 ("soc/fsl/qbman: fix issue in qman_delete_cgr_safe()")
CC: stable@vger.kernel.org
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Camelia Groza <camelia.groza@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72ebb41b88f9d7c10c5e159e0507074af0a22fe2 ]
A previous bugfix added a call to kcalloc(), which starting in gcc-14
causes a harmless warning about the argument order:
drivers/soc/fsl/dpio/dpio-service.c: In function 'dpaa2_io_service_enqueue_multiple_desc_fq':
drivers/soc/fsl/dpio/dpio-service.c:526:29: error: 'kcalloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Werror=calloc-transposed-args]
526 | ed = kcalloc(sizeof(struct qbman_eq_desc), 32, GFP_KERNEL);
| ^~~~~~
drivers/soc/fsl/dpio/dpio-service.c:526:29: note: earlier argument should specify number of elements, later size of each element
Since the two are only multiplied, the order does not change the
behavior, so just fix it now to shut up the compiler warning.
Dmity independently came up with the same fix.
Fixes: 5c4a5999b2 ("soc: fsl: dpio: avoid stack usage warning")
Reported-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5155e48128826d0c5999dc9f47aa746df54da448 ]
It seems, the only actual mentions of PM2250 can be found are related to
the Qualcomm RB1 platform. However even RB1 schematics use PM4125 as a
PMIC name. Rename PM2250 to PM4125 to follow the documentation.
Fixes: 082f9bc60f ("soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs")
Fixes: 112d96fd29 ("soc: qcom: socinfo: Add some PMICs")
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240128-pm2250-pm4125-rename-v2-1-d51987e9f83a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6dd9a236042e305d7b69ee92db7347bf5943e7d3 ]
The symbol's prompt should be a one-line description, instead of just
duplicating the symbol name.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b979f2d50a099f3402418d7ff5f26c3952fb08bb upstream.
A recent DRM series purporting to simplify support for "transparent
bridges" and handling of probe deferrals ironically exposed a
use-after-free issue on pmic_glink_altmode probe deferral.
This has manifested itself as the display subsystem occasionally failing
to initialise and NULL-pointer dereferences during boot of machines like
the Lenovo ThinkPad X13s.
Specifically, the dp-hpd bridge is currently registered before all
resources have been acquired which means that it can also be
deregistered on probe deferrals.
In the meantime there is a race window where the new aux bridge driver
(or PHY driver previously) may have looked up the dp-hpd bridge and
stored a (non-reference-counted) pointer to the bridge which is about to
be deallocated.
When the display controller is later initialised, this triggers a
use-after-free when attaching the bridges:
dp -> aux -> dp-hpd (freed)
which may, for example, result in the freed bridge failing to attach:
[drm:drm_bridge_attach [drm]] *ERROR* failed to attach bridge /soc@0/phy@88eb000 to encoder TMDS-31: -16
or a NULL-pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
...
Call trace:
drm_bridge_attach+0x70/0x1a8 [drm]
drm_aux_bridge_attach+0x24/0x38 [aux_bridge]
drm_bridge_attach+0x80/0x1a8 [drm]
dp_bridge_init+0xa8/0x15c [msm]
msm_dp_modeset_init+0x28/0xc4 [msm]
The DRM bridge implementation is clearly fragile and implicitly built on
the assumption that bridges may never go away. In this case, the fix is
to move the bridge registration in the pmic_glink_altmode driver to
after all resources have been looked up.
Incidentally, with the new dp-hpd bridge implementation, which registers
child devices, this is also a requirement due to a long-standing issue
in driver core that can otherwise lead to a probe deferral loop (see
commit fbc35b45f9 ("Add documentation on meaning of -EPROBE_DEFER")).
[DB: slightly fixed commit message by adding the word 'commit']
Fixes: 080b4e2485 ("soc: qcom: pmic_glink: Introduce altmode support")
Fixes: 2bcca96abfbf ("soc: qcom: pmic-glink: switch to DRM_AUX_HPD_BRIDGE")
Cc: <stable@vger.kernel.org> # 6.3
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240217150228.5788-4-johan+linaro@kernel.org
[ johan: backport to 6.7 which does not have DRM aux bridge ]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f79ee78767ca60e7a2c89eacd2dbdf237d97e838 upstream.
We need to bail out before adding/removing devices if we are going to
-EPROBE_DEFER. Otherwise boot can get stuck in a probe deferral loop due
to a long-standing issue in driver core (see commit fbc35b45f9 ("Add
documentation on meaning of -EPROBE_DEFER")).
Deregistering the altmode child device can potentially also trigger bugs
in the DRM bridge implementation, which does not expect bridges to go
away.
[DB: slightly fixed commit message by adding the word 'commit']
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20231213210644.8702-1-robdclark@gmail.com
[ johan: rebase on 6.8-rc4, amend commit message and mention DRM ]
Fixes: 58ef4ece1e ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Cc: <stable@vger.kernel.org> # 6.3
Cc: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240217150228.5788-5-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9c6724abf969251af53cdae525ad8100ec78d3c2 ]
Xen broadcasts SGI to each VM when multiple VMs run on Xen hypervisor. In
such case spurious SGI is expected if one event is registered by one VM and
not registered by another VM. We let users know that Unhandled SGI is not
error and expected if kernel is running on Xen hypervisor.
Signed-off-by: Tanmay Shah <tanmay.shah@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1698431039-2734260-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daed80ed07580e5adc0e6d8bc79933a35154135a ]
When preemption is enabled in kernel and if any task which can be
preempted should not use smp_processor_id() directly, since CPU
switch can happen at any time, the previous value of cpu_id
differs with current cpu_id. As a result we see the below call trace
during xlnx_event_manager_probe.
[ 6.140197] dump_backtrace+0x0/0x190
[ 6.143884] show_stack+0x18/0x40
[ 6.147220] dump_stack_lvl+0x7c/0xa0
[ 6.150907] dump_stack+0x18/0x34
[ 6.154241] check_preemption_disabled+0x124/0x134
[ 6.159068] debug_smp_processor_id+0x20/0x2c
[ 6.163453] xlnx_event_manager_probe+0x48/0x250
To protect cpu_id, It is recommended to use get_cpu()/put_cpu()
to disable preemption, get the cpu_id and enable preemption respectively.
(For Reference, Documentation/locking/preempt-locking.rst and
Documentation/kernel-hacking/hacking.rst)
Use preempt_disable()/smp_processor_id()/preempt_enable()
API's to achieve the same.
Signed-off-by: HariBabu Gattem <haribabu.gattem@xilinx.com>
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231027055622.21544-1-jay.buddhabhatti@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit dfe66d012af2ddfa566cf9c860b8472b412fb7e4 upstream.
The qmc_chan_reset_rx() set the is_rx_stopped flag. This leads to an
inconsistent state in the following sequence.
qmc_chan_stop()
qmc_chan_reset()
Indeed, after the qmc_chan_reset() call, the channel must still be
stopped. Only a qmc_chan_start() call can move the channel from stopped
state to started state.
Fix the issue removing the is_rx_stopped flag setting from
qmc_chan_reset()
Fixes: 3178d58e0b ("soc: fsl: cpm1: Add support for QMC")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-4-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4fb7d2eac9ff9bfc35a2e4d40c7169a332416e0 upstream.
The PMIC GLINK altmode driver currently supports at most two ports.
Fix the incomplete port sanity check on notifications to avoid
accessing and corrupting memory beyond the port array if we ever get a
notification for an unsupported port.
Fixes: 080b4e2485 ("soc: qcom: pmic_glink: Introduce altmode support")
Cc: stable@vger.kernel.org # 6.3
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231109093100.19971-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eed6e57e9f3e2beac37563eb6a0129549daa330e ]
Commit c14e64b469 ("soc: qcom: llcc: Support chipsets that can
write to llcc") add the support for chipset where capacity based
allocation and retention through power collapse can be programmed
based on content of SCT table mentioned in the llcc driver where
the target like sdm845 where the entire programming related to it
is controlled in firmware. However, the commit introduces a bug
where capacity/retention register get overwritten each time it
gets programmed for each slice and that results in misconfiguration
of the register based on SCT table and that is not expected
behaviour instead it should be read modify write to retain the
configuration of other slices.
This issue is totally caught from code review and programming test
and not through any power/perf numbers so, it is not known what
impact this could make if we don't have this change however,
this feature are for these targets and they should have been
programmed accordingly as per their configuration mentioned in
SCT table like others bits information.
This change brings one difference where it keeps capacity/retention
bits of the slices that are not mentioned in SCT table in unknown
state where as earlier it was initialized to zero.
Fixes: c14e64b469 ("soc: qcom: llcc: Support chipsets that can write to llcc")
Signed-off-by: Atul Dhudase <quic_adhudase@quicinc.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/1701876771-10695-1-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5692aeea5bcb9331e956628c3bc8fc9afcc9765d ]
The device_for_each_child_node loop should call fwnode_handle_put()
before return in the error cases, to avoid resource leaks.
Let's fix this bug in pmic_glink_altmode_probe().
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Link: https://lore.kernel.org/r/20230612133452.47315-1-luhongfei@vivo.com
[bjorn: Rebased patch, moved fw_handle_put() from jump target into the loop]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f86955f2b1ff9fbc7ae4f6595112b2f896885366 ]
As it was pointed out by Simon Ser, the DRM_MODE_CONNECTOR_USB connector
is reserved for the GUD devices. Other drivers (i915, amdgpu) use
DRM_MODE_CONNECTOR_DisplayPort even if the DP stream is handled by the
USB-C altmode. While we are still working on implementing the proper way
to let userspace know that the DP is wrapped into USB-C, change
connector type to be DRM_MODE_CONNECTOR_DisplayPort.
Fixes: 080b4e2485 ("soc: qcom: pmic_glink: Introduce altmode support")
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Simon Ser <contact@emersion.fr>
Link: https://lore.kernel.org/r/20231010225229.77027-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1a1bc8775b26345aba2be278118999e7f661d3d ]
Usually there is only one llcc device. But if there were a second, even
a failed probe call would modify the global drv_data pointer. So check
if drv_data is valid before overwriting it.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: a3134fb09e ("drivers: soc: Add LLCC driver")
Link: https://lore.kernel.org/r/20230926083229.2073890-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
- Sort out a few Kconfig dependency issues for the rich set of RISC-V
non-coherent DMA support.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZTowWwAKCRCKwlD9ZEnx
cH8wAP49M82pS/aT2KpT+ANVdb7GqUemkYQKn9dI1y4yI5G+IwEAoDBzjUZ//aS0
FgLgVyJrUUy3MVIGiqi/WX+N1GehjQg=
=LXd4
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+T5y
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes-for-v6.6-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas fixes for v6.6 (take three)
- Sort out a few Kconfig dependency issues for the rich set of RISC-V
non-coherent DMA support.
* tag 'renesas-fixes-for-v6.6-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: ARCH_R9A07G043 depends on !RISCV_ISA_ZICBOM
riscv: only select DMA_DIRECT_REMAP from RISCV_ISA_ZICBOM and ERRATA_THEAD_PBMT
riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT
Link: https://lore.kernel.org/r/cover.1698312384.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARCH_R9A07G043 has its own non-standard global pool based DMA coherent
allocator, which conflicts with the remap based RISCV_ISA_ZICBOM version.
Add a proper dependency.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231018052654.50074-4-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
AngeloGioacchino Del Regno is stepping in as co-maintainer for the
MediaTek SoC platform and starts by sending some dts fixes for
the mt8195 platform that had been pending for a while.
On the ixp4xx platform, Krzysztof Halasa steps down as co-maintainer,
reflecting that Linus Walleij has been handling this on his own
for the past few years.
Generic RISC-V kernels are now marked as incompatible with the
RZ/Five platform that requires custom hacks both for managing
its DMA bounce buffers and for addressing low virtual memory.
Finally, there is one bugfix for the AMDTEE firmware driver
to prevent a use-after-free bug.
-----BEGIN PGP SIGNATURE-----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=Ukoh
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"AngeloGioacchino Del Regno is stepping in as co-maintainer for the
MediaTek SoC platform and starts by sending some dts fixes for the
mt8195 platform that had been pending for a while.
On the ixp4xx platform, Krzysztof Halasa steps down as co-maintainer,
reflecting that Linus Walleij has been handling this on his own for
the past few years.
Generic RISC-V kernels are now marked as incompatible with the RZ/Five
platform that requires custom hacks both for managing its DMA bounce
buffers and for addressing low virtual memory.
Finally, there is one bugfix for the AMDTEE firmware driver to prevent
a use-after-free bug"
* tag 'soc-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
IXP4xx MAINTAINERS entries
arm64: dts: mediatek: mt8195: Set DSU PMU status to fail
arm64: dts: mediatek: fix t-phy unit name
arm64: dts: mediatek: mt8195-demo: update and reorder reserved memory regions
arm64: dts: mediatek: mt8195-demo: fix the memory size to 8GB
MAINTAINERS: Add Angelo as MediaTek SoC co-maintainer
soc: renesas: Make ARCH_R9A07G043 (riscv version) depend on NONPORTABLE
tee: amdtee: fix use-after-free vulnerability in amdtee_close_session
Randy reported a randconfig build issue against linux-next:
WARNING: unmet direct dependencies detected for ERRATA_ANDES
Depends on [n]: RISCV_ALTERNATIVE [=n] && RISCV_SBI [=y]
Selected by [y]:
- ARCH_R9A07G043 [=y] && SOC_RENESAS [=y] && RISCV [=y] && NONPORTABLE [=y] && RISCV_SBI [=y]
../arch/riscv/errata/andes/errata.c:59:54: warning: 'struct alt_entry' declared inside parameter list will not be visible outside of this definition or declaration
59 | void __init_or_module andes_errata_patch_func(struct alt_entry *begin, struct alt_entry *end,
On RISC-V, alternatives are not usable in XIP kernels, which this
randconfig happened to select. Rather than add a check for whether
alternatives are available before selecting the ERRATA_ANDES config
option, rework the R9A07G043 Kconfig entry to depend on the
configuration options required to support its non-standard cache
coherency implementation.
Without these options enabled, the SoC is effectively non-functional to
begin with, so there's an extra benefit in preventing the creation of
non-functional kernels.
The "if RISCV_DMA_NONCOHERENT" can be dropped, as ERRATA_ANDES_CMO will
select it.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/all/09a6b0f0-76a1-45e3-ab52-329c47393d1d@infradead.org/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231012-pouch-parkway-7d26c04b3300@spud
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Drew found "CONFIG_DMA_GLOBAL_POOL=y causes ADMA buffer alloc to fail"
the log looks like:
mmc0: Unable to allocate ADMA buffers - falling back to standard DMA
The logic is: generic riscv defconfig selects ARCH_RENESAS then
ARCH_R9A07G043 which selects DMA_GLOBAL_POOL, which assumes all
non-dma-coherent riscv platforms have a dma global pool, this assumption
seems not correct. And I believe DMA_GLOBAL_POOL should not be
selected by ARCH_SOCFAMILIY, instead, only ARCH under some specific
conditions can select it globaly, for example NOMMU ARM and so on,
because it's designed for special cases such as "nommu cases where
non-cacheable memory lives in a fixed place in the physical address
map" as pointed out by Robin.
Fix the issue by making ARCH_R9A07G043 (riscv version) depend on
NONPORTABLE, thus generic defconfig won't select ARCH_R9A07G043 by
default. And even for random config case, there will be less debug
effort once we see NONPORTABLE is enabled.
Reported-by: Drew Fustini <dfustini@baylibre.com>
Closes: https://lore.kernel.org/linux-riscv/ZRuamJuShOnvP1pr@x1/
Fixes: 484861e09f ("soc: renesas: Kconfig: Select the required configs for RZ/Five SoC")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Drew Fustini <dfustini@baylibre.com>
Link: https://lore.kernel.org/r/20231004150856.2540-1-jszhang@kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The syscon poweroff and reboot nodes logically belong to the Power
Management Unit so populate possible children.
Without it, the reboot/poweroff feature becomes unavailable.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now, "loongson,ls2k0500-pmc" is used as fallback compatible, so the
ls2k1000 compatible in the driver can be dropped directly.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since commit 67694c076b ("soc: loongson2_pm: add power management
support"), the Loongson-2K PM driver was added, but it didn't update the
Kconfig entry for the INPUT dependency, leading to build errors, so
update the Kconfig entry to depend on INPUT.
/opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld:
drivers/soc/loongson/loongson2_pm.o: in function `loongson2_power_button_init':
/work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:101:(.text+0x350): undefined reference to `input_allocate_device'
/opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld:
/work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:109:(.text+0x3dc): undefined reference to `input_set_capability'
/opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld:
/work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:111:(.text+0x3e4): undefined reference to `input_register_device'
/opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld:
/work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:125:(.text+0x3fc): undefined reference to `input_free_device'
/opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld: drivers/soc/loongson/loongson2_pm.o: in function `input_report_key':
/work/lnx/next/linux-next-20230825/LOONG64/../include/linux/input.h:425:(.text+0x58c): undefined reference to `input_event'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 836fb30949 ("soc: imx8m: Enable OCOTP clock before reading the
register") added configuration to enable the OCOTP clock before
attempting to read from the associated registers.
This same kexec issue is present with the imx8m SoCs that use the
imx8mm_soc_uid function (e.g. imx8mp). This requires the imx8mm_soc_uid
function to configure the OCOTP clock before accessing the associated
registers. This change implements the same clock enable functionality
that is present in the imx8mq_soc_revision function for the
imx8mm_soc_uid function.
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Fixes: 836fb30949 ("soc: imx8m: Enable OCOTP clock before reading the register")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Prabhakar <prabhakar.csengg@gmail.com> says:
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
non-coherent DMA support for AX45MP
====================================
On the Andes AX45MP core, cache coherency is a specification option so it
may not be supported. In this case DMA will fail. To get around with this
issue this patch series does the below:
1] Andes alternative ports is implemented as errata which checks if the
IOCP is missing and only then applies to CMO errata. One vendor specific
SBI EXT (ANDES_SBI_EXT_IOCP_SW_WORKAROUND) is implemented as part of
errata.
Below are the configs which Andes port provides (and are selected by
RZ/Five):
- ERRATA_ANDES
- ERRATA_ANDES_CMO
OpenSBI patch supporting ANDES_SBI_EXT_IOCP_SW_WORKAROUND SBI is now
part v1.3 release.
2] Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
OpenSBI configures the PMA regions as required and creates a reserve memory
node and propagates it to the higher boot stack.
Currently OpenSBI (upstream) configures the required PMA region and passes
this a shared DMA pool to Linux.
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
pma_resv0@58000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x58000000 0x0 0x08000000>;
no-map;
linux,dma-default;
};
};
The above shared DMA pool gets appended to Linux DTB so the DMA memory
requests go through this region.
3] We provide callbacks to synchronize specific content between memory and
cache.
4] RZ/Five SoC selects the below configs
- AX45MP_L2_CACHE
- DMA_GLOBAL_POOL
- ERRATA_ANDES
- ERRATA_ANDES_CMO
----------x---------------------x--------------------x---------------x----
* b4-shazam-merge:
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
cache: Add L2 cache management for Andes AX45MP RISC-V core
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
riscv: mm: dma-noncoherent: nonstandard cache operations support
riscv: errata: Add Andes alternative ports
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
Link: https://lore.kernel.org/r/20230818135723.80612-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
changes to the clk framework this time around. That's probably because everyone
was on vacation (yours truly included). We did lose a couple clk drivers this
time around because nobody was using those devices. That skews the diffstat a
bit, but either way, nothing looks out of the ordinary here. The usual suspects
are chugging along adding support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a handful of
patches that move the NR_CLKS define from the DT binding header to the driver.
There's even patches that migrate drivers to use clk_parent_data and clk_hw to
describe clk tree topology. It seems that the spring (summer?) cleaning bug got
some folks, or the semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio codec on
RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs
- Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative
parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher) clock rate
for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to
the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are
added, while PCIe pipe clock, SDCC rcg ops are corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver
- Support retention for the Qualcomm SC8280XP display clock controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix
issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250,
while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for correctness
- Extend the Qualcomm SM83550 Video clock controller to support SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3,
M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow
glitch free switching
-----BEGIN PGP SIGNATURE-----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=h2Jz
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...
These are all minor cleanups for platform specific code in arch/arm/
and some of the associated drivers. The majority of these are work
done by Rob Herring to improve the way devicetreee header files
are handled.
-----BEGIN PGP SIGNATURE-----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=c9NM
-----END PGP SIGNATURE-----
Merge tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC cleanups from Arnd Bergmann:
"These are all minor cleanups for platform specific code in arch/arm/
and some of the associated drivers. The majority of these are work
done by Rob Herring to improve the way devicetreee header files are
handled"
* tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits)
ARM: davinci: Drop unused includes
ARM: s5pv210: Explicitly include correct DT includes
ARM: dove: Drop unused includes
ARM: mvebu: Explicitly include correct DT includes
Documentation/process: maintainer-soc: document dtbs_check requirement for Samsung
MAINTAINER: samsung: document dtbs_check requirement for Samsung
Documentation/process: maintainer-soc: add clean platforms profile
MAINTAINERS: soc: reference maintainer profile
ARM: nspire: Remove unused header file mmio.h
ARM: nspire: Use syscon-reboot to handle restart
soc: fsl: Explicitly include correct DT includes
soc: xilinx: Explicitly include correct DT includes
soc: sunxi: Explicitly include correct DT includes
soc: rockchip: Explicitly include correct DT includes
soc: mediatek: Explicitly include correct DT includes
soc: aspeed: Explicitly include correct DT includes
firmware: Explicitly include correct DT includes
bus: Explicitly include correct DT includes
ARM: spear: Explicitly include correct DT includes
ARM: mvebu: Explicitly include correct DT includes
...
The main change this time is the introduction of the drivers/genpd
subsystem that gets split out from drivers/soc to keep common
functionality together. Ulf Hansson is taking over maintainership for
these and is sending a separate pull request with the same commits,
but they are in the soc drivers tree to avoid conflicts against other
soc driver patches.
The SCMI driver subsystem gets an update to version 3.2 of the
specification. There are also updates to memory, reset and other firmware
drivers.
On the soc driver side, the updates are mostly cleanups across a number
of Arm platforms. On driver for loongarch adds power management for DT
based systems, another driver is for HiSilicon's Arm server chips with
their HCCS system health interface.
The remaining updates for the most part add support for additional
hardware in existing drivers or contain minor cleanups. Most of these
are for the Qualcomm Snapdragon platform.
-----BEGIN PGP SIGNATURE-----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=xmHW
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The main change this time was the introduction of the drivers/genpd
subsystem that gets split out from drivers/soc to keep common
functionality together.
The SCMI driver subsystem gets an update to version 3.2 of the
specification. There are also updates to memory, reset and other
firmware drivers.
On the soc driver side, the updates are mostly cleanups across a
number of Arm platforms. On driver for loongarch adds power management
for DT based systems, another driver is for HiSilicon's Arm server
chips with their HCCS system health interface.
The remaining updates for the most part add support for additional
hardware in existing drivers or contain minor cleanups. Most of these
are for the Qualcomm Snapdragon platform"
* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
bus: fsl-mc: Use common ranges functions
soc: kunpeng_hccs: fix some sparse warnings about incorrect type
soc: loongson2_pm: add power management support
soc: dt-bindings: add loongson-2 pm
soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
genpd: rockchip: Add PD_VO entry for rv1126
bus: ti-sysc: Fix cast to enum warning
soc: kunpeng_hccs: add MAILBOX dependency
MAINTAINERS: remove OXNAS entry
dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
soc: kunpeng_hccs: fix size_t format string
soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
dt-bindings: firmware: qcom: scm: Updating VMID list
firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
firmware: imx: scu-irq: add imx_scu_irq_get_status
...
and starts moving some of the corresponding code in there.
We have currently ~60 users of the genpd provider interface, which are
sprinkled across various subsystems. To release some burden from the soc
maintainers (Arnd Bergmann, etc) in particular, but also to gain a better
overall view of what goes on in the area, I will help out with maintenance.
-----BEGIN PGP SIGNATURE-----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=Vp8b
-----END PGP SIGNATURE-----
Merge tag 'genpd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull ARM SoC generic power domain driver updates from Ulf Hansson:
"This adds a new subsystem for generic power domain providers in
drivers/genpd and starts moving some of the corresponding code in
there.
We have currently ~60 users of the genpd provider interface, which are
sprinkled across various subsystems. To release some burden from the
soc maintainers (Arnd Bergmann, etc) in particular, but also to gain a
better overall view of what goes on in the area, I will help out with
maintenance"
[ I find the "genpd" name singularly uninformative, so we'll probably
end up moving this driver subsystem somewhere else, but that's still
being discussed - Linus ]
* tag 'genpd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (30 commits)
genpd: ti: Use for_each_node_with_property() simplify code logic
genpd: Explicitly include correct DT includes
genpd: imx: scu-pd: initialize is_off according to HW state
genpd: imx: scu-pd: Suppress bind attrs
genpd: imx: scu-pd: do not power off console if no_console_suspend
genpd: imx: scu-pd: add more PDs
genpd: imx: scu-pd: enlarge PD range
genpd: imx: relocate scu-pd under genpd
MAINTAINERS: adjust file entry in STARFIVE JH71XX PMU CONTROLLER DRIVER
genpd: Makefile: build imx
genpd: move owl-sps-helper.c from drivers/soc
soc: starfive: remove stale Makefile entry
ARM: ux500: Move power-domain driver to the genpd dir
ARM: ux500: Convert power-domain code into a regular platform driver
soc: xilinx: Move power-domain driver to the genpd dir
soc: ti: Mover power-domain drivers to the genpd dir
soc: tegra: Move powergate-bpmp driver to the genpd dir
soc: sunxi: Move power-domain driver to the genpd dir
soc: starfive: Move the power-domain driver to the genpd dir
soc: samsung: Move power-domain driver to the genpd dir
...
- Carve out the new CONFIG_LIST_HARDENED as a more focused subset of
CONFIG_DEBUG_LIST (Marco Elver).
- Fix kallsyms lookup failure under Clang LTO (Yonghong Song).
- Clarify documentation for CONFIG_UBSAN_TRAP (Jann Horn).
- Flexible array member conversion not carried in other tree (Gustavo
A. R. Silva).
- Various strlcpy() and strncpy() removals not carried in other trees
(Azeem Shaikh, Justin Stitt).
- Convert nsproxy.count to refcount_t (Elena Reshetova).
- Add handful of __counted_by annotations not carried in other trees,
as well as an LKDTM test.
- Fix build failure with gcc-plugins on GCC 14+.
- Fix selftests to respect SKIP for signal-delivery tests.
- Fix CFI warning for paravirt callback prototype.
- Clarify documentation for seq_show_option_n() usage.
-----BEGIN PGP SIGNATURE-----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=9ZWP
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As has become normal, changes are scattered around the tree (either
explicitly maintainer Acked or for trivial stuff that went ignored):
- Carve out the new CONFIG_LIST_HARDENED as a more focused subset of
CONFIG_DEBUG_LIST (Marco Elver)
- Fix kallsyms lookup failure under Clang LTO (Yonghong Song)
- Clarify documentation for CONFIG_UBSAN_TRAP (Jann Horn)
- Flexible array member conversion not carried in other tree (Gustavo
A. R. Silva)
- Various strlcpy() and strncpy() removals not carried in other trees
(Azeem Shaikh, Justin Stitt)
- Convert nsproxy.count to refcount_t (Elena Reshetova)
- Add handful of __counted_by annotations not carried in other trees,
as well as an LKDTM test
- Fix build failure with gcc-plugins on GCC 14+
- Fix selftests to respect SKIP for signal-delivery tests
- Fix CFI warning for paravirt callback prototype
- Clarify documentation for seq_show_option_n() usage"
* tag 'hardening-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
LoadPin: Annotate struct dm_verity_loadpin_trusted_root_digest with __counted_by
kallsyms: Change func signature for cleanup_symbol_name()
kallsyms: Fix kallsyms_selftest failure
nsproxy: Convert nsproxy.count to refcount_t
integrity: Annotate struct ima_rule_opt_list with __counted_by
lkdtm: Add FAM_BOUNDS test for __counted_by
Compiler Attributes: counted_by: Adjust name and identifier expansion
um: refactor deprecated strncpy to memcpy
um: vector: refactor deprecated strncpy
alpha: Replace one-element array with flexible-array member
hardening: Move BUG_ON_DATA_CORRUPTION to hardening options
list: Introduce CONFIG_LIST_HARDENED
list_debug: Introduce inline wrappers for debug checks
compiler_types: Introduce the Clang __preserve_most function attribute
gcc-plugins: Rename last_stmt() for GCC 14+
selftests/harness: Actually report SKIP for signal tests
x86/paravirt: Fix tlb_remove_table function callback prototype warning
EISA: Replace all non-returning strlcpy with strscpy
perf: Replace strlcpy with strscpy
um: Remove strlcpy declaration
...
Compatible and clock handling in the Qualcomm SCM driver is cleaned up,
together with a couple stylistic cleanups and transition to mark
exported symbols GPL only.
An abstraction for the RPM subsystem is introduced, to make align the
structure of the SMD and GLINK nodes thereof with the structure when a
remoteproc is involved. This is done to facilitate associating
additional entities with the RPM subsystem.
The qmp_send() API is modified to not expose hardware requirements onto
the client drivers, and then further extended to allow command
formatting directly in the API, to facilitate this typical use case.
In the Qualcomm Command DB driver, NUL characters previously included in
identifiers are dropped from the debugfs, to facilitate scripting.
The thresholds of the BWMON driver are simplified to avoid hard coded
starting values.
The OCMEM driver is updated with some cleanups and fixes, and addition
of MSM8226 support.
PMIC_GLINK gains support for retimer switches, safe mode is selected
when the cable is disconnected from altmode and the same is enabled for
SM8550.
An off-by-one string length check is corrected in the QMI encoder
decoder library.
The RPMh tracepoints are extended to include the state of the request,
to provide needed context in the traced events.
The series from Ulf creating a genpd framework is integrated, to
facilitate the other changes to the cpr, rpmpd and rpmhpd driver.
SDX75 support is added to the rpmhpd driver, and the rpmpd driver is
extended with the same sync_state logic found in the rpmhpd driver.
The socinfo driver gains knowledge about SM4450 and SM7125, the IPQ5019
platform is dropped.
Clock handling in the GSBI driver is cleaned up with the use of
devm_clk_get_enabled().
The list of VMIDs defined for the SCM assign memory interface is
extended.
-----BEGIN PGP SIGNATURE-----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=SEyF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=RpyB
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.6
Compatible and clock handling in the Qualcomm SCM driver is cleaned up,
together with a couple stylistic cleanups and transition to mark
exported symbols GPL only.
An abstraction for the RPM subsystem is introduced, to make align the
structure of the SMD and GLINK nodes thereof with the structure when a
remoteproc is involved. This is done to facilitate associating
additional entities with the RPM subsystem.
The qmp_send() API is modified to not expose hardware requirements onto
the client drivers, and then further extended to allow command
formatting directly in the API, to facilitate this typical use case.
In the Qualcomm Command DB driver, NUL characters previously included in
identifiers are dropped from the debugfs, to facilitate scripting.
The thresholds of the BWMON driver are simplified to avoid hard coded
starting values.
The OCMEM driver is updated with some cleanups and fixes, and addition
of MSM8226 support.
PMIC_GLINK gains support for retimer switches, safe mode is selected
when the cable is disconnected from altmode and the same is enabled for
SM8550.
An off-by-one string length check is corrected in the QMI encoder
decoder library.
The RPMh tracepoints are extended to include the state of the request,
to provide needed context in the traced events.
The series from Ulf creating a genpd framework is integrated, to
facilitate the other changes to the cpr, rpmpd and rpmhpd driver.
SDX75 support is added to the rpmhpd driver, and the rpmpd driver is
extended with the same sync_state logic found in the rpmhpd driver.
The socinfo driver gains knowledge about SM4450 and SM7125, the IPQ5019
platform is dropped.
Clock handling in the GSBI driver is cleaned up with the use of
devm_clk_get_enabled().
The list of VMIDs defined for the SCM assign memory interface is
extended.
* tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (52 commits)
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
dt-bindings: firmware: qcom: scm: Updating VMID list
dt-bindings: qcom: Update RPMHPD entries for some SoCs
soc: qcom: qmi_encdec: Restrict string length in decode
soc: qcom: smem: Fix incompatible types in comparison
soc: qcom: ocmem: add missing clk_disable_unprepare() in ocmem_dev_probe()
soc: qcom: socinfo: Add SoC ID for SM7125
dt-bindings: arm: qcom,ids: Add SoC ID for SM7125
dt-bindings: arm: qcom,ids: drop the IPQ5019 SoC ID
soc: qcom: socinfo: drop the IPQ5019 SoC ID
soc: qcom: socinfo: add SM4450 ID
dt-bindings: arm: qcom,ids: add SoC ID for SM4450
soc: qcom: pmic_glink: enable altmode for SM8550
soc: qcom: pmic_glink_altmode: add retimer-switch support
soc: qcom: pmic_glink_altmode: handle safe mode when disconnect
soc: qcom: rpmhpd: Add SDX75 power domains
dt-bindings: power: qcom,rpmpd: Add compatible for sdx75
genpd: Makefile: build imx
...
Link: https://lore.kernel.org/r/20230818023338.2484467-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
sdmmc and jtag for rk3588 (makes sdmmc unreliable).
This includes the shared genpd-v6.5-rc1-1 tag from Ulf Hansson, which moves
the powerdomain drivers into a new genpd subsystem.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmTdQxUQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgaRgB/41U/lA1H0hIfXBKKBXFEDYkQMC1qEEtDnU
pi8L6Bp44Gb5JbrD4wrNMc9AUJokxC1zGEVmwpySXNOy3ma0DQRPPKNQMNo8gcae
R8bZPbpdvkBBY6HMeFI0/c0+B3qU0G/RBfaMMe0edPlaeLFz8j8TUotUJo4rGh20
RoA2Dir7/YWN1S0EIOwJVRzYnr9vG7rGJsceabyYH/liDFs7neEgCDi9LWwNIBbL
5ANWM7UytIOsZOrPOegLHLgsPyYvccHgKCgctCPt6k04/9ZBTwp6pFyBtUtd91GW
oAL7SgF5tbkDYysj3nwZGOzCUIUVlxMTs6szTge4WuzGVOhXOZrn
=5C7a
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Nt2J
-----END PGP SIGNATURE-----
Merge tag 'v6.6-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/drivers
PD_VO powerdomain for rv1126 and disabling of the automatic switch between
sdmmc and jtag for rk3588 (makes sdmmc unreliable).
This includes the shared genpd-v6.5-rc1-1 tag from Ulf Hansson, which moves
the powerdomain drivers into a new genpd subsystem.
* tag 'v6.6-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
genpd: rockchip: Add PD_VO entry for rv1126
Link: https://lore.kernel.org/r/40318909.XM6RcZxFsP@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Loongson-2's power management controller was ACPI, supports ACPI
S2Idle (Suspend To Idle), ACPI S3 (Suspend To RAM), ACPI S4 (Suspend To
Disk), ACPI S5 (Soft Shutdown) and supports multiple wake-up methods
(USB, GMAC, PWRBTN, etc.). This driver was to add power management
controller support that base on dts for Loongson-2 series SoCs.
Co-developed-by: Liu Yun <liuyun@loongson.cn>
Signed-off-by: Liu Yun <liuyun@loongson.cn>
Co-developed-by: Liu Peibao <liupeibao@loongson.cn>
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Cc: soc@kernel.org
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Link: https://lore.kernel.org/r/20230803063703.5659-3-zhuyinbo@loongson.cn
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
RK3588 has the same issue as other earlier RK SoCs. JTAG
functionality muxed to some SDMMC data pins causes issues with SDMMC
interface. Without this patch, I can only use SDMMC inteface
with bus-width = <1>. (JTAG is muxed to data pins D2 and D3)
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20230619011002.2249960-1-megi@xff.cz
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
When the mailbox subsystem is disabled, the driver fails to link, so add
an explicit dependency. Some other drivers use 'select' here, but the
dependency seems more logical and more common.
Fixes: 886bdf9c88 ("soc: hisilicon: Support HCCS driver on Kunpeng SoC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With qmp_send() handling variable length messages and string formatting
he callers of qmp_send() can be cleaned up to not care about these
things.
Drop the QMP_MSG_LEN sized buffers and use the message formatting, as
appropriate.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811205839.727373-5-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The majority of callers to qmp_send() composes the message dynamically
using some form of sprintf(), resulting in unnecessary complication and
stack usage.
By changing the interface of qmp_send() to take a format string and
arguments, the duplicated composition of the commands can be moved to a
single location.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811205839.727373-4-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The existing implementation of qmp_send() requires the caller to provide
a buffer which is of word-aligned. The underlying reason for this is
that message ram only supports word accesses, but pushing this
requirement onto the clients results in the same boiler plate code
sprinkled in every call site.
By using a temporary buffer in qmp_send() we can hide the underlying
hardware limitations from the clients and allow them to pass their
NUL-terminates C string directly.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811205839.727373-2-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Printing a size_t using the %lu format string causes a warning on
architectures that define the type as 'unsigned int':
In file included from include/linux/device.h:15,
from include/linux/acpi.h:14,
from drivers/soc/hisilicon/kunpeng_hccs.c:25:
drivers/soc/hisilicon/kunpeng_hccs.c: In function 'hccs_get_bd_info':
drivers/soc/hisilicon/kunpeng_hccs.c:441:25: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
Use the correct %zu format instead.
Fixes: 886bdf9c88 ("soc: hisilicon: Support HCCS driver on Kunpeng SoC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Sean Anderson