Add kselftest_install directory to the .gitignore which is created while
creation of tar ball of objects:
make -C tools/testing/selftests gen_tar
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
bluetooth, and netfilter.
Current release - regressions:
- iwlwifi: don't advertise TWT support, prevent FW crash
- xfrm: fix the if_id check in changelink
- xen/netfront: destroy queues before real_num_tx_queues is zeroed
- bluetooth: fix not checking MGMT cmd pending queue, make scanning
work again
Current release - new code bugs:
- mptcp: make SIOCOUTQ accurate for fallback socket
- bluetooth: access skb->len after null check
- bluetooth: hci_sync: fix not using conn_timeout
- smc: fix cleanup when register ULP fails
- dsa: restore error path of dsa_tree_change_tag_proto
- iwlwifi: fix build error for IWLMEI
- iwlwifi: mvm: propagate error from request_ownership to the user
Previous releases - regressions:
- xfrm: fix pMTU regression when reported pMTU is too small
- xfrm: fix TCP MSS calculation when pMTU is close to 1280
- bluetooth: fix bt_skb_sendmmsg not allocating partial chunks
- ipv6: ensure we call ipv6_mc_down() at most once, prevent leaks
- ipv6: prevent leaks in igmp6 when input queues get full
- fix up skbs delta_truesize in UDP GRO frag_list
- eth: e1000e: fix possible HW unit hang after an s0ix exit
- eth: e1000e: correct NVM checksum verification flow
- ptp: ocp: fix large time adjustments
Previous releases - always broken:
- tcp: make tcp_read_sock() more robust in presence of urgent data
- xfrm: distinguishing SAs and SPs by if_id in xfrm_migrate
- xfrm: fix xfrm_migrate issues when address family changes
- dcb: flush lingering app table entries for unregistered devices
- smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error
- mac80211: fix EAPoL rekey fail in 802.3 rx path
- mac80211: fix forwarded mesh frames AC & queue selection
- netfilter: nf_queue: fix socket access races and bugs
- batman-adv: fix ToCToU iflink problems and check the result
belongs to the expected net namespace
- can: gs_usb, etas_es58x: fix opened_channel_cnt's accounting
- can: rcar_canfd: register the CAN device when fully ready
- eth: igb, igc: phy: drop premature return leaking HW semaphore
- eth: ixgbe: xsk: change !netif_carrier_ok() handling in
ixgbe_xmit_zc(), prevent live lock when link goes down
- eth: stmmac: only enable DMA interrupts when ready
- eth: sparx5: move vlan checks before any changes are made
- eth: iavf: fix races around init, removal, resets and vlan ops
- ibmvnic: more reset flow fixes
Misc:
- eth: fix return value of __setup handlers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TqqZ
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, xfrm, wifi, bluetooth, and netfilter.
Lots of various size fixes, the length of the tag speaks for itself.
Most of the 5.17-relevant stuff comes from xfrm, wifi and bt trees
which had been lagging as you pointed out previously. But there's also
a larger than we'd like portion of fixes for bugs from previous
releases.
Three more fixes still under discussion, including and xfrm revert for
uAPI error.
Current release - regressions:
- iwlwifi: don't advertise TWT support, prevent FW crash
- xfrm: fix the if_id check in changelink
- xen/netfront: destroy queues before real_num_tx_queues is zeroed
- bluetooth: fix not checking MGMT cmd pending queue, make scanning
work again
Current release - new code bugs:
- mptcp: make SIOCOUTQ accurate for fallback socket
- bluetooth: access skb->len after null check
- bluetooth: hci_sync: fix not using conn_timeout
- smc: fix cleanup when register ULP fails
- dsa: restore error path of dsa_tree_change_tag_proto
- iwlwifi: fix build error for IWLMEI
- iwlwifi: mvm: propagate error from request_ownership to the user
Previous releases - regressions:
- xfrm: fix pMTU regression when reported pMTU is too small
- xfrm: fix TCP MSS calculation when pMTU is close to 1280
- bluetooth: fix bt_skb_sendmmsg not allocating partial chunks
- ipv6: ensure we call ipv6_mc_down() at most once, prevent leaks
- ipv6: prevent leaks in igmp6 when input queues get full
- fix up skbs delta_truesize in UDP GRO frag_list
- eth: e1000e: fix possible HW unit hang after an s0ix exit
- eth: e1000e: correct NVM checksum verification flow
- ptp: ocp: fix large time adjustments
Previous releases - always broken:
- tcp: make tcp_read_sock() more robust in presence of urgent data
- xfrm: distinguishing SAs and SPs by if_id in xfrm_migrate
- xfrm: fix xfrm_migrate issues when address family changes
- dcb: flush lingering app table entries for unregistered devices
- smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error
- mac80211: fix EAPoL rekey fail in 802.3 rx path
- mac80211: fix forwarded mesh frames AC & queue selection
- netfilter: nf_queue: fix socket access races and bugs
- batman-adv: fix ToCToU iflink problems and check the result belongs
to the expected net namespace
- can: gs_usb, etas_es58x: fix opened_channel_cnt's accounting
- can: rcar_canfd: register the CAN device when fully ready
- eth: igb, igc: phy: drop premature return leaking HW semaphore
- eth: ixgbe: xsk: change !netif_carrier_ok() handling in
ixgbe_xmit_zc(), prevent live lock when link goes down
- eth: stmmac: only enable DMA interrupts when ready
- eth: sparx5: move vlan checks before any changes are made
- eth: iavf: fix races around init, removal, resets and vlan ops
- ibmvnic: more reset flow fixes
Misc:
- eth: fix return value of __setup handlers"
* tag 'net-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
ipv6: fix skb drops in igmp6_event_query() and igmp6_event_report()
net: dsa: make dsa_tree_change_tag_proto actually unwind the tag proto change
ixgbe: xsk: change !netif_carrier_ok() handling in ixgbe_xmit_zc()
selftests: mlxsw: resource_scale: Fix return value
selftests: mlxsw: tc_police_scale: Make test more robust
net: dcb: disable softirqs in dcbnl_flush_dev()
bnx2: Fix an error message
sfc: extend the locking on mcdi->seqno
net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error cause by server
net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error generated by client
net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe()
tcp: make tcp_read_sock() more robust
bpf, sockmap: Do not ignore orig_len parameter
net: ipa: add an interconnect dependency
net: fix up skbs delta_truesize in UDP GRO frag_list
iwlwifi: mvm: return value for request_ownership
nl80211: Update bss channel on channel switch for P2P_CLIENT
iwlwifi: fix build error for IWLMEI
ptp: ocp: Add ptp_ocp_adjtime_coarse for large adjustments
batman-adv: Don't expect inter-netns unique iflink indices
...
The test runs several test cases and is supposed to return an error in
case at least one of them failed.
Currently, the check of the return value of each test case is in the
wrong place, which can result in the wrong return value. For example:
# TESTS='tc_police' ./resource_scale.sh
TEST: 'tc_police' [default] 968 [FAIL]
tc police offload count failed
Error: mlxsw_spectrum: Failed to allocate policer index.
We have an error talking to the kernel
Command failed /tmp/tmp.i7Oc5HwmXY:969
TEST: 'tc_police' [default] overflow 969 [ OK ]
...
TEST: 'tc_police' [ipv4_max] overflow 969 [ OK ]
$ echo $?
0
Fix this by moving the check to be done after each test case.
Fixes: 059b18e21c ("selftests: mlxsw: Return correct error code in resource scale test")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test adds tc filters and checks how many of them were offloaded by
grepping for 'in_hw'.
iproute2 commit f4cd4f127047 ("tc: add skip_hw and skip_sw to control
action offload") added offload indication to tc actions, producing the
following output:
$ tc filter show dev swp2 ingress
...
filter protocol ipv6 pref 1000 flower chain 0 handle 0x7c0
eth_type ipv6
dst_ip 2001:db8:1::7bf
skip_sw
in_hw in_hw_count 1
action order 1: police 0x7c0 rate 10Mbit burst 100Kb mtu 2Kb action drop overhead 0b
ref 1 bind 1
not_in_hw
used_hw_stats immediate
The current grep expression matches on both 'in_hw' and 'not_in_hw',
resulting in incorrect results.
Fix that by using JSON output instead.
Fixes: 5061e77326 ("selftests: mlxsw: Add scale test for tc-police")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In particular these include:
1) Remove output of inv for scalars in print_verifier_state
2) Replace inv with scalar in verifier error messages
3) Remove _value suffixes for umin/umax/s32_min/etc (except map_value)
4) Remove output of id=0
5) Remove output of ref_obj_id=0
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220301222745.1667206-1-mykolal@fb.com
The page_cnt parameter is used to specify the number of memory pages
allocated for each per-CPU buffer, it must be non-zero and a power of 2.
Currently, the __perf_buffer__new() function attempts to validate that
the page_cnt is a power of 2 but forgets checking for the case where
page_cnt is zero, we can fix it by replacing 'page_cnt & (page_cnt - 1)'
with 'page_cnt == 0 || (page_cnt & (page_cnt - 1))'.
If so, we also don't need to add a check in perf_buffer__new_v0_6_0() to
make sure that page_cnt is non-zero and the check for zero in
perf_buffer__new_raw_v0_6_0() can also be removed.
The code will be cleaner and more readable.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220303005921.53436-1-ytcoode@gmail.com
This patch adds tests on forwarding the delivery_time for
the following cases
- tcp/udp + ip4/ip6 + bpf_redirect_neigh
- tcp/udp + ip4/ip6 + ip[6]_forward
- bpf_skb_set_delivery_time
- The old rcv timestamp expectation on tc-bpf@ingress
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* __sk_buff->delivery_time_type:
This patch adds __sk_buff->delivery_time_type. It tells if the
delivery_time is stored in __sk_buff->tstamp or not.
It will be most useful for ingress to tell if the __sk_buff->tstamp
has the (rcv) timestamp or delivery_time. If delivery_time_type
is 0 (BPF_SKB_DELIVERY_TIME_NONE), it has the (rcv) timestamp.
Two non-zero types are defined for the delivery_time_type,
BPF_SKB_DELIVERY_TIME_MONO and BPF_SKB_DELIVERY_TIME_UNSPEC. For UNSPEC,
it can only happen in egress because only mono delivery_time can be
forwarded to ingress now. The clock of UNSPEC delivery_time
can be deduced from the skb->sk->sk_clockid which is how
the sch_etf doing it also.
* Provide forwarded delivery_time to tc-bpf@ingress:
With the help of the new delivery_time_type, the tc-bpf has a way
to tell if the __sk_buff->tstamp has the (rcv) timestamp or
the delivery_time. During bpf load time, the verifier will learn if
the bpf prog has accessed the new __sk_buff->delivery_time_type.
If it does, it means the tc-bpf@ingress is expecting the
skb->tstamp could have the delivery_time. The kernel will then
read the skb->tstamp as-is during bpf insn rewrite without
checking the skb->mono_delivery_time. This is done by adding a
new prog->delivery_time_access bit. The same goes for
writing skb->tstamp.
* bpf_skb_set_delivery_time():
The bpf_skb_set_delivery_time() helper is added to allow setting both
delivery_time and the delivery_time_type at the same time. If the
tc-bpf does not need to change the delivery_time_type, it can directly
write to the __sk_buff->tstamp as the existing tc-bpf has already been
doing. It will be most useful at ingress to change the
__sk_buff->tstamp from the (rcv) timestamp to
a mono delivery_time and then bpf_redirect_*().
bpf only has mono clock helper (bpf_ktime_get_ns), and
the current known use case is the mono EDT for fq, and
only mono delivery time can be kept during forward now,
so bpf_skb_set_delivery_time() only supports setting
BPF_SKB_DELIVERY_TIME_MONO. It can be extended later when use cases
come up and the forwarding path also supports other clock bases.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test that verifies operation of L3 HW statistics.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tests file configuration and error handling of the Intel Software
Defined Silicon sysfs ABI.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220225012457.1661574-2-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add tool for key certificate and activation payload provisioning on
Intel CPUs supporting Software Defined Silicon (SDSi).
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220225012457.1661574-1-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Use kfree_rcu(ptr, rcu) variant, using kfree_rcu(ptr) was not
intentional. From Eric Dumazet.
2) Use-after-free in netfilter hook core, from Eric Dumazet.
3) Missing rcu read lock side for netfilter egress hook,
from Florian Westphal.
4) nf_queue assume state->sk is full socket while it might not be.
Invoke sock_gen_put(), from Florian Westphal.
5) Add selftest to exercise the reported KASAN splat in 4)
6) Fix possible use-after-free in nf_queue in case sk_refcnt is 0.
Also from Florian.
7) Use input interface index only for hardware offload, not for
the software plane. This breaks tc ct action. Patch from Paul Blakey.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
net/sched: act_ct: Fix flow table lookup failure with no originating ifindex
netfilter: nf_queue: handle socket prefetch
netfilter: nf_queue: fix possible use-after-free
selftests: netfilter: add nfqueue TCP_NEW_SYN_RECV socket race test
netfilter: nf_queue: don't assume sk is full socket
netfilter: egress: silence egress hook lockdep splats
netfilter: fix use-after-free in __nf_register_net_hook()
netfilter: nf_tables: prefer kfree_rcu(ptr, rcu) variant
====================
Link: https://lore.kernel.org/r/20220301215337.378405-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
second patch was supposed to fix the first, but in reality it was
just as broken, so both have to go.
x86 host:
* Revert incorrect assumption that cr3 changes come with preempt notifier
callbacks (they don't when static branches are changed, for example)
ARM host:
* Correctly synchronise PMR and co on PSCI CPU_SUSPEND
* Skip tests that depend on GICv3 when the HW isn't available
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmIeGnUUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMCYgf9GPVUOQUbHVxVqvKB1ABnY3ZIZuS3
+/XLgVifSmXb2sPQmcKIPk7eQkxlzpnVdbznJO5qFMtVKRv/ppj+/ly2wwF8l+rR
m1XvyYo2sukK5vTpBrQiRm3aWY7vpx0ds4DStLnrnBuPF/U7x6WlHSL/BqXaNcSJ
e+SXd/UFhkg7dEQaU3eqXyf2/mMfR2ZLdUb4v+/UiV7kfzzvRqNERd8HUoVk2FcM
VYBr07ChaV4XB/dZsCDVSz2Z7f7rH3sMMW82ZHKjuFUEW4Dij9NiX2ycaeRvkSLG
tnliTuROCY2bOQeIVCTHf5XqCAAm7sA1AoClFaUy30+UW9s9j45NuhUQbA==
=nuHK
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"The bigger part of the change is a revert for x86 hosts. Here the
second patch was supposed to fix the first, but in reality it was just
as broken, so both have to go.
x86 host:
- Revert incorrect assumption that cr3 changes come with preempt
notifier callbacks (they don't when static branches are changed,
for example)
ARM host:
- Correctly synchronise PMR and co on PSCI CPU_SUSPEND
- Skip tests that depend on GICv3 when the HW isn't available"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: aarch64: Skip tests if we can't create a vgic-v3
Revert "KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()"
Revert "KVM: VMX: Save HOST_CR3 in vmx_set_host_fs_gs()"
KVM: arm64: Don't miss pending interrupts for suspended vCPU
This cpupower update for Linux 5.18-rc1 adds AMD P-State Support to
cpupower tool. AMD P-State kernel support went into 5.17-rc1.
-----BEGIN PGP SIGNATURE-----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=PP0E
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility updates for 5.18-rc1 from Shuah Khan:
"This cpupower update for Linux 5.18-rc1 adds AMD P-State Support to
cpupower tool. AMD P-State kernel support went into 5.17-rc1."
* tag 'linux-cpupower-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: Add "perf" option to print AMD P-State information
cpupower: Add function to print AMD P-State performance capabilities
cpupower: Move print_speed function into misc helper
cpupower: Enable boost state support for AMD P-State module
cpupower: Add AMD P-State sysfs definition and access helper
cpupower: Introduce ACPI CPPC library
cpupower: Add the function to get the sysfs value from specific table
cpupower: Initial AMD P-State capability
cpupower: Add the function to check AMD P-State enabled
cpupower: Add AMD P-State capability flag
This expands generic branch type classification by adding two more entries
there in i.e irq and exception return. Also updates the x86 implementation
to process X86_BR_IRET and X86_BR_IRQ records as appropriate. This changes
branch types reported to user space on x86 platform but it should not be a
problem. The possible scenarios and impacts are enumerated here.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1645681014-3346-1-git-send-email-anshuman.khandual@arm.com
The main thing that the selftest verifies is that KVM copies x2APIC's
ICR[63:32] to/from ICR2 when userspace accesses the vAPIC page via
KVM_{G,S}ET_LAPIC. KVM previously split x2APIC ICR to ICR+ICR2 at the
time of write (from the guest), and so KVM must preserve that behavior
for backwards compatibility between different versions of KVM.
It will also test other invariants, e.g. that KVM clears the BUSY
flag on ICR writes, that the reserved bits in ICR2 are dropped on writes
from the guest, etc...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update btf_dump case for conflicting names caused by forward declaration.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220301053250.1464204-3-xukuohai@huawei.com
The testcase uses event code 0x35340401e0 to verify the settings for
different fields in Monitor Mode Control Register A (MMCRA). The fields
include thresh_start, thresh_stop thresh_select, sdar mode, sample and
marked bit. Checks if these fields are translated correctly via perf
interface to MMCRA.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-21-kjain@linux.ibm.com
Currently if a declaration appears in the BTF before the definition, the
definition is dumped as a conflicting name, e.g.:
$ bpftool btf dump file vmlinux format raw | grep "'unix_sock'"
[81287] FWD 'unix_sock' fwd_kind=struct
[89336] STRUCT 'unix_sock' size=1024 vlen=14
$ bpftool btf dump file vmlinux format c | grep "struct unix_sock"
struct unix_sock;
struct unix_sock___2 { <--- conflict, the "___2" is unexpected
struct unix_sock___2 *unix_sk;
This causes a compilation error if the dump output is used as a header file.
Fix it by skipping declaration when counting duplicated type names.
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220301053250.1464204-2-xukuohai@huawei.com
The testcase uses event code 0x1340000001c040 to verify the settings for
different src fields in Monitor Mode Control Register 3 (MMCR3). Checks
if these fields are translated correctly via perf interface to MMCR3 on
ISA v3.1 platform.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-20-kjain@linux.ibm.com
The testcases uses cycles event to verify the freeze counter settings in
Monitor Mode Control Register 2 (MMCR2). Event modifier (exclude_kernel)
setting is used for the event attribute to check the FCxS and FCxH (
Freeze counter in privileged and hypervisor state ) settings via perf
interface.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Add error checking, check MSR for MSR_HV, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-19-kjain@linux.ibm.com
The testcases uses event code 0x010000046080 to verify the l2l3 bit
setting for Monitor Mode Control Register 2 (MMCR2). check if this bit
is set correctly via perf interface in ISA v3.1 platform.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-18-kjain@linux.ibm.com
The testcase uses event code "0x26880" to verify the settings for
different fields in Monitor Mode Control Register 1 (MMCR1). The field
include PMCxCOMB. Checks if this field are translated correctly via perf
interface to MMCR1
Add selftest for mmcr1 comb field.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-16-kjain@linux.ibm.com
The testcase uses event code 0x500fa to verify the FC5-6 bit setting in
Monitor Mode Control Register 0 (MMCR0). Check if FC5-6 bit is not set
in MMCR0 when using Performance Monitor Counter 5 and 6 (PMC5 and PMC6).
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-15-kjain@linux.ibm.com
The testcase uses event code 0x1001e to verify two bit settings (FC5-6
and PMC1CE) in Monitor Mode Control Register 0 (MMCR0). Check if FC5-6
bit to be set in MMCR0 when not using Performance Monitor Counter 5 and
6 (PMC5 and PMC6). And also PMC1CE is expected to be set when using
PMC1. Test if these fields are programmed correctly via perf interface.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-14-kjain@linux.ibm.com
The testcase uses event code 0x500fa ("instructions") to verify the
PMCjCE bit setting in Monitor Mode Control Register 0 (MMCR0). This bit
is expected to be set in MMCR0 when using Performance Monitor Counter
5 (PMC5). Checks if perf interface sets this bit correctly.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-13-kjain@linux.ibm.com
The testcase uses cycles event to check the PMCCEXT bit setting in
Monitor Mode Control Register 0 (MMCR0). Check if perf interface sets
this control bit in MMCR0 on ISA v3.1 platform.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-12-kjain@linux.ibm.com
The testcase uses event code 0x500fa ("instructions") to check the
CC56RUN bit setting in Monitor Mode Control Register 0(MMCR0). In ISA
v3.1 platform, this bit is expected to be set in MMCR0 when using
Performance Monitor Counter 5 and 6 (PMC5 and PMC6). Verify this is done
correctly by perf interface.
CC56RUN bit makes PMC5 and PMC6 count regardless of the run latch state.
This bit is set in power10 since PMC5 and PMC6 is used in power10 for
counting instructions and cycles. Hence added a check to skip this test
in other platforms
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-11-kjain@linux.ibm.com
The testcase uses "instructions" event to verify two bits(PMAE and PMAO)
in Monitor Mode Control Register 0 (MMCR0). At the time of interrupt,
pmae bit ( which enables performance monitor exception ) is expected to
be cleared and pmao (which indicates performance monitor alert) bit is
expected to be set in MMCR0. And testcases handles these checks.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-10-kjain@linux.ibm.com
Add macro and utility functions to fetch individual fields from Monitor
Mode Control Register 0(MMCR0) and Monitor Mode Control Register
1(MMCR1) PMU register.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-8-kjain@linux.ibm.com
Along with it, Add macros and utility functions to fetch individual
fields from Monitor Mode Control Register 2(MMCR2) register.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-7-kjain@linux.ibm.com
Extended event_init_opts() to include initialization of sampling
testcases. Patch adds an event_init_sampling() wrapper to initialize
event attribute fields for sampling events. This includes initializing
sample period, sample type and event type.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-6-kjain@linux.ibm.com
Add couple of basic utility functions to post process the mmap buffer.
It includes function to read the total number of samples present in the
mmap buffer and function to get the address of the first sample.
Add function "get_intr_regs" which will return pointer to interrupt
registers present in the sample, incase sample type
PERF_SAMPLE_REGS_INTR is set.
Add functions "get_reg_value" which can be used to read any interrupt
register value from a given sample.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-5-kjain@linux.ibm.com
Each platform has raw event encoding format which specifies the bit
positions for different fields. The fields from event code gets
translated into performance monitoring mode control register (MMCRx)
settings. Patch add macros to extract individual fields from the event
code.
Add functions for sanity checks, since testcases currently are only
supported in power9 and power10.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Read PVR directly rather than using /proc/cpuinfo]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-4-kjain@linux.ibm.com
Add support functions for enabling perf sampling test in a new folder
"sampling_tests" under "selftests/powerpc/pmu". This includes support
functions for allocating and processing the mmap buffer. These functions
are added/defined in "sampling_tests/misc.*" files.
Also updates the corresponding Makefiles in "selftests/powerpc" and
"sampling_tests" folder.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Drop unneeded bits from the Makefile]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-3-kjain@linux.ibm.com
causes:
BUG: KASAN: slab-out-of-bounds in sk_free+0x25/0x80
Write of size 4 at addr ffff888106df0284 by task nf-queue/1459
sk_free+0x25/0x80
nf_queue_entry_release_refs+0x143/0x1a0
nf_reinject+0x233/0x770
... without 'netfilter: nf_queue: don't assume sk is full socket'.
Signed-off-by: Florian Westphal <fw@strlen.de>
This patch adds a new test script test_vxlan_vnifiltering.sh
with tests for vni filtering api, various datapath tests.
Also has a test with a mix of traditional, metadata and vni
filtering devices inuse at the same time.
Signed-off-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a BPF map of type BPF_MAP_TYPE_PERF_EVENT_ARRAY doesn't have the
max_entries parameter set, the map will be created with max_entries set
to the number of available CPUs. When we try to reuse such a pinned map,
map_is_reuse_compat will return false, as max_entries in the map
definition differs from max_entries of the existing map, causing the
following error:
libbpf: couldn't reuse pinned map at '/sys/fs/bpf/m_logging': parameter mismatch
Fix this by overwriting max_entries in the map definition. For this to
work, we need to do this in bpf_object__create_maps, before calling
bpf_object__reuse_map.
Fixes: 57a00f4164 ("libbpf: Add auto-pinning of maps when loading BPF objects")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220225152355.315204-1-stijn@linux-ipv6.be
Now atomic tests will attach fentry program and run it through
bpf_prog_test_run_opts(), but attaching fentry program depends on BPF
trampoline which is only available under x86-64. Considering many archs
have atomic support, using raw_tp program instead.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220217072232.1186625-5-houtao1@huawei.com
Because the OUTPUT variable ends with a slash but CURDIR doesn't, to keep
the _OUTPUT value consistent, we add a trailing slash to CURDIR when
defining _OUTPUT variable.
Since the _OUTPUT variable holds a value ending with a trailing slash,
there is no need to add another one when defining BOOTSTRAP_OUTPUT and
LIBBPF_OUTPUT variables. Likewise, when defining LIBBPF_INCLUDE and
LIBBPF_BOOTSTRAP_INCLUDE, we shouldn't add an extra slash either for the
same reason.
When building libbpf, the value of the DESTDIR argument should also not
end with a trailing slash.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220226163815.520133-1-ytcoode@gmail.com
To enable the capturing of samples as part of perf event, add a new
field "mmap_buffer" to "struct event". This field is a place-holder for
sample collection
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-2-kjain@linux.ibm.com
- rtla (Real-Time Linux Analysis tool): fix typo in man page
- rtla: Update API -e to -E before it is released
- rlla: Error message fix and memory leak fix
- Partially uninline trace event soft disable to shrink text
- Fix function graph start up test
- Have triggers affect the trace instance they are in and not top level
- Have osnoise sleep in the units it says it uses
- Remove unused ftrace stub function
- Remove event probe redundant info from event in the buffer
- Fix group ownership setting in tracefs
- Ensure trace buffer is minimum size to prevent crashes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYho7XBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiOhAQDbCbEjIYwkGCpckuGgSQiMU4bAWUzk
jCz9PoaTxoIWJwEAsLWrAPb0pDzNwdEKjiC3fJoUJhz3NwlEjJ7hQ3BxzAI=
=iXOQ
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- rtla (Real-Time Linux Analysis tool):
- fix typo in man page
- Update API -e to -E before it is released
- Error message fix and memory leak fix
- Partially uninline trace event soft disable to shrink text
- Fix function graph start up test
- Have triggers affect the trace instance they are in and not top level
- Have osnoise sleep in the units it says it uses
- Remove unused ftrace stub function
- Remove event probe redundant info from event in the buffer
- Fix group ownership setting in tracefs
- Ensure trace buffer is minimum size to prevent crashes
* tag 'trace-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
rtla/osnoise: Fix error message when failing to enable trace instance
rtla/osnoise: Free params at the exit
rtla/hist: Make -E the short version of --entries
tracing: Fix selftest config check for function graph start up test
tracefs: Set the group ownership in apply_options() not parse_options()
tracing/osnoise: Make osnoise_main to sleep for microseconds
ftrace: Remove unused ftrace_startup_enable() stub
tracing: Ensure trace buffer is at least 4096 bytes large
tracing: Uninline trace_trigger_soft_disabled() partly
eprobes: Remove redundant event type information
tracing: Have traceon and traceoff trigger honor the instance
tracing: Dump stacktrace trigger to the corresponding instance
rtla: Fix systme -> system typo on man page
Running the memfd script ./run_hugetlbfs_test.sh will often end in error
as follows:
memfd-hugetlb: CREATE
memfd-hugetlb: BASIC
memfd-hugetlb: SEAL-WRITE
memfd-hugetlb: SEAL-FUTURE-WRITE
memfd-hugetlb: SEAL-SHRINK
fallocate(ALLOC) failed: No space left on device
./run_hugetlbfs_test.sh: line 60: 166855 Aborted (core dumped) ./memfd_test hugetlbfs
opening: ./mnt/memfd
fuse: DONE
If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will
allocate 'just enough' pages to run the test. In the SEAL-FUTURE-WRITE
test the mfd_fail_write routine maps the file, but does not unmap. As a
result, two hugetlb pages remain reserved for the mapping. When the
fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb
pages, it is short by the two reserved pages.
Fix by making sure to unmap in mfd_fail_write.
Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a trace instance creation fails, tools are printing:
Could not enable -> osnoiser <- tracer for tracing
Print the actual (and correct) name of the tracer it fails to enable.
Link: https://lkml.kernel.org/r/53ef0582605af91eca14b19dba9fc9febb95d4f9.1645206561.git.bristot@kernel.org
Fixes: b1696371d8 ("rtla: Helper functions for rtla")
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The variable that stores the parsed command line arguments are not
being free()d at the rtla osnoise top exit path.
Free params variable before exiting.
Link: https://lkml.kernel.org/r/0be31d8259c7c53b98a39769d60cfeecd8421785.1645206561.git.bristot@kernel.org
Fixes: 1eceb2fc2c ("rtla/osnoise: Add osnoise top mode")
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, --entries uses -e as the short version in the hist mode of
timerlat and osnoise tools. But as -e is already used to enable events
on trace sessions by other tools, thus let's keep it available for the
same usage for all rtla tools.
Make -E the short version of --entries for hist mode on all tools.
Note: rtla was merged in this merge window, so rtla was not released yet.
Link: https://lkml.kernel.org/r/5dbf0cbe7364d3a05e708926b41a097c59a02b1e.1645206561.git.bristot@kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Some problems with reading the RTC time may happen rarely, for example
while the RTC is updating. So read the RTC many times to catch these
problems. For example, a previous attempt for my
commit ea6fa4961a ("rtc: mc146818-lib: fix RTC presence check")
was incorrect and would have triggered this selftest.
To avoid the risk of damaging the hardware, wait 11ms before consecutive
reads.
In rtc_time_to_timestamp I copied values manually instead of casting -
just to be on the safe side. The 11ms wait period was chosen so that it is
not a divisor of 1000ms.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
- Correctly synchronise PMR and co on PSCI CPU_SUSPEND
- Skip tests that depend on GICv3 when the HW isn't available
-----BEGIN PGP SIGNATURE-----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=Nyln
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.17, take #4
- Correctly synchronise PMR and co on PSCI CPU_SUSPEND
- Skip tests that depend on GICv3 when the HW isn't available
Some features may invalidate some tests, for example by supporting an
operation which would trap otherwise. Allow tests to list features that
they are incompatible with so we can cover the case where a signal will
be generated without disruption on systems where that won't happen.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220207152109.197566-6-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
On a VM with PMU disabled via KVM_CAP_PMU_CONFIG, the PMU should not be
usable by the guest.
Signed-off-by: David Dunn <daviddunn@google.com>
Message-Id: <20220223225743.2703915-4-daviddunn@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Carve out portion of vm_create_default so that selftests can modify
a "default" VM prior to creating vcpus.
Signed-off-by: David Dunn <daviddunn@google.com>
Message-Id: <20220223225743.2703915-3-daviddunn@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new capability, KVM_CAP_PMU_CAPABILITY, that takes a bitmask of
settings/features to allow userspace to configure PMU virtualization on
a per-VM basis. For now, support a single flag, KVM_PMU_CAP_DISABLE,
to allow disabling PMU virtualization for a VM even when KVM is configured
with enable_pmu=true a module level.
To keep KVM simple, disallow changing VM's PMU configuration after vCPUs
have been created.
Signed-off-by: David Dunn <daviddunn@google.com>
Message-Id: <20220223225743.2703915-2-daviddunn@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The arch_timer and vgic_irq kselftests assume that they can create a
vgic-v3, using the library function vgic_v3_setup() which aborts with a
test failure if it is not possible to do so. Since vgic-v3 can only be
instantiated on systems where the host has GICv3 this leads to false
positives on older systems where that is not the case.
Fix this by changing vgic_v3_setup() to return an error if the vgic can't
be instantiated and have the callers skip if this happens. We could also
exit flagging a skip in vgic_v3_setup() but this would prevent future test
cases conditionally deciding which GIC to use or generally doing more
complex output.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Tested-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220223131624.1830351-1-broonie@kernel.org
After commit 05be5e273c ("selftests: mptcp: add disconnect tests")
the mptcp selftests leave behind a couple of tmp files after
each run. run_tests_disconnect() misnames a few variables used to
track them. Address the issue setting the appropriate global variables
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix double free in in the error path when opening perf.data from multiple
files in a directory instead of from a single file.
- Sync the msr-index.h copy with the kernel sources
- Fix error when printing 'weight' field in 'perf script'.
- Skip failing sigtrap test for arm+aarch64 in 'perf test'.
- Fix failure to use a cpu list for uncore events in hybrid systems, e.g. Intel
Alder Lake.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYhfQCgAKCRCyPKLppCJ+
J8BFAP910OfAonc3wqMIF9Y8pQaJJpmIpBHzQjMmdAUKElnwJgD/R2rJ6WmR9zJI
5+8Kz1D1JEy/Ymi66RRw1+HHcm5JLAs=
=Vin5
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.17-2022-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix double free in in the error path when opening perf.data from
multiple files in a directory instead of from a single file
- Sync the msr-index.h copy with the kernel sources
- Fix error when printing 'weight' field in 'perf script'
- Skip failing sigtrap test for arm+aarch64 in 'perf test'
- Fix failure to use a cpu list for uncore events in hybrid systems,
e.g. Intel Alder Lake
* tag 'perf-tools-fixes-for-v5.17-2022-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf script: Fix error when printing 'weight' field
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf data: Fix double free in perf_session__delete()
perf evlist: Fix failed to use cpu list for uncore events
perf test: Skip failing sigtrap test for arm+aarch64
* Expose KVM_CAP_ENABLE_CAP since it is supported
* Disable KVM_HC_CLOCK_PAIRING in TSC catchup mode
* Ensure async page fault token is nonzero
* Fix lockdep false negative
* Fix FPU migration regression from the AMX changes
x86 guest:
* Don't use PV TLB/IPI/yield on uniprocessor guests
PPC:
* reserve capability id (topic branch for ppc/kvm)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmIXyQAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKJQf/T9NeXOFIPIIlH4ZKM7155qlwX8dx
NR2YV+RNYd27MDkaEm9w4ucXacGpPuBPPx9v7UiLlAqAN+NP7nF3rQKC0SpQMC6H
EKFtm+8al8EzyDYP36fqnwDne/xWHlOeGXRRJMKPGhXBSoXoY5cK35IXmNZjfteQ
hK7siBs2saJ2VFqMCbJ9Pqdu1NDO6OEt8HWz2Dnx6EUd90O0pHWZy5JvWOYfyLjL
Y2pP0dZQxuB/PmqkpVj2gV9jK2Zhj33eerzDV4tVXPV7le8fgGeTaJ8ft+SUIizS
YCcPR89+u5c9yzlwY2i7mvloayKnuqkECiGtRG6VHNlrPZTPijems8tH1w==
=lWjy
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86 host:
- Expose KVM_CAP_ENABLE_CAP since it is supported
- Disable KVM_HC_CLOCK_PAIRING in TSC catchup mode
- Ensure async page fault token is nonzero
- Fix lockdep false negative
- Fix FPU migration regression from the AMX changes
x86 guest:
- Don't use PV TLB/IPI/yield on uniprocessor guests
PPC:
- reserve capability id (topic branch for ppc/kvm)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: nSVM: disallow userspace setting of MSR_AMD64_TSC_RATIO to non default value when tsc scaling disabled
KVM: x86/mmu: make apf token non-zero to fix bug
KVM: PPC: reserve capability 210 for KVM_CAP_PPC_AIL_MODE_3
x86/kvm: Don't use pv tlb/ipi/sched_yield if on 1 vCPU
x86/kvm: Fix compilation warning in non-x86_64 builds
x86/kvm/fpu: Remove kvm_vcpu_arch.guest_supported_xcr0
x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0
kvm: x86: Disable KVM_HC_CLOCK_PAIRING if tsc is in always catchup mode
KVM: Fix lockdep false negative during host resume
KVM: x86: Add KVM_CAP_ENABLE_CAP to x86
Current release - regressions:
- bpf: fix crash due to out of bounds access into reg2btf_ids
- mvpp2: always set port pcs ops, avoid null-deref
- eth: marvell: fix driver load from initrd
- eth: intel: revert "Fix reset bw limit when DCB enabled with 1 TC"
Current release - new code bugs:
- mptcp: fix race in overlapping signal events
Previous releases - regressions:
- xen-netback: revert hotplug-status changes causing devices to
not be configured
- dsa:
- avoid call to __dev_set_promiscuity() while rtnl_mutex isn't held
- fix panic when removing unoffloaded port from bridge
- dsa: microchip: fix bridging with more than two member ports
Previous releases - always broken:
- bpf:
- fix crash due to incorrect copy_map_value when both spin lock
and timer are present in a single value
- fix a bpf_timer initialization issue with clang
- do not try bpf_msg_push_data with len 0
- add schedule points in batch ops
- nf_tables:
- unregister flowtable hooks on netns exit
- correct flow offload action array size
- fix a couple of memory leaks
- vsock: don't check owner in vhost_vsock_stop() while releasing
- gso: do not skip outer ip header in case of ipip and net_failover
- smc: use a mutex for locking "struct smc_pnettable"
- openvswitch: fix setting ipv6 fields causing hw csum failure
- mptcp: fix race in incoming ADD_ADDR option processing
- sysfs: add check for netdevice being present to speed_show
- sched: act_ct: fix flow table lookup after ct clear or switching
zones
- eth: intel: fixes for SR-IOV forwarding offloads
- eth: broadcom: fixes for selftests and error recovery
- eth: mellanox: flow steering and SR-IOV forwarding fixes
Misc:
- make __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor
friends not report freed skbs as drops
- force inlining of checksum functions in net/checksum.h
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=LT/x
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - regressions:
- bpf: fix crash due to out of bounds access into reg2btf_ids
- mvpp2: always set port pcs ops, avoid null-deref
- eth: marvell: fix driver load from initrd
- eth: intel: revert "Fix reset bw limit when DCB enabled with 1 TC"
Current release - new code bugs:
- mptcp: fix race in overlapping signal events
Previous releases - regressions:
- xen-netback: revert hotplug-status changes causing devices to not
be configured
- dsa:
- avoid call to __dev_set_promiscuity() while rtnl_mutex isn't
held
- fix panic when removing unoffloaded port from bridge
- dsa: microchip: fix bridging with more than two member ports
Previous releases - always broken:
- bpf:
- fix crash due to incorrect copy_map_value when both spin lock
and timer are present in a single value
- fix a bpf_timer initialization issue with clang
- do not try bpf_msg_push_data with len 0
- add schedule points in batch ops
- nf_tables:
- unregister flowtable hooks on netns exit
- correct flow offload action array size
- fix a couple of memory leaks
- vsock: don't check owner in vhost_vsock_stop() while releasing
- gso: do not skip outer ip header in case of ipip and net_failover
- smc: use a mutex for locking "struct smc_pnettable"
- openvswitch: fix setting ipv6 fields causing hw csum failure
- mptcp: fix race in incoming ADD_ADDR option processing
- sysfs: add check for netdevice being present to speed_show
- sched: act_ct: fix flow table lookup after ct clear or switching
zones
- eth: intel: fixes for SR-IOV forwarding offloads
- eth: broadcom: fixes for selftests and error recovery
- eth: mellanox: flow steering and SR-IOV forwarding fixes
Misc:
- make __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor
friends not report freed skbs as drops
- force inlining of checksum functions in net/checksum.h"
* tag 'net-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: mv643xx_eth: process retval from of_get_mac_address
ping: remove pr_err from ping_lookup
Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC"
openvswitch: Fix setting ipv6 fields causing hw csum failure
ipv6: prevent a possible race condition with lifetimes
net/smc: Use a mutex for locking "struct smc_pnettable"
bnx2x: fix driver load from initrd
Revert "xen-netback: Check for hotplug-status existence before watching"
Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"
net/mlx5e: Fix VF min/max rate parameters interchange mistake
net/mlx5e: Add missing increment of count
net/mlx5e: MPLSoUDP decap, fix check for unsupported matches
net/mlx5e: Fix MPLSoUDP encap to use MPLS action information
net/mlx5e: Add feature check for set fec counters
net/mlx5e: TC, Skip redundant ct clear actions
net/mlx5e: TC, Reject rules with forward and drop actions
net/mlx5e: TC, Reject rules with drop and modify hdr action
net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets
net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
net/mlx5: Fix possible deadlock on rule deletion
...
When emitting type declarations in skeletons, bpftool will now also emit
static assertions on the size of the data/bss/rodata/etc fields. This
ensures that in situations where userspace and kernel types have the same
name but differ in size we do not silently produce incorrect results but
instead break the build.
This was reported in [1] and as expected the repro in [2] fails to build
on the new size assert after this change.
[1]: Closes: https://github.com/libbpf/libbpf/issues/433
[2]: https://github.com/fuweid/iovisor-bcc-pr-3777
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Hengqi Chen <hengqi.chen@gmail.com>
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Link: https://lore.kernel.org/bpf/f562455d7b3cf338e59a7976f4690ec5a0057f7f.camel@fb.com
Add "-c --perf" option in cpupower-frequency-info to get the performance
and frequency values for AMD P-State.
Commit message amended:
Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
UBSAN_BOUNDS and UBSAN_TRAP depend on UBSAN config option.
merge_config.sh script generates following warnings if parent config
doesn't have UBSAN config already enabled and UBSAN_BOUNDS/UBSAN_TRAP
config options don't get added to the parent config.
Value requested for CONFIG_UBSAN_BOUNDS not in final .config
Requested value: CONFIG_UBSAN_BOUNDS=y
Actual value:
Value requested for CONFIG_UBSAN_TRAP not in final .config
Requested value: CONFIG_UBSAN_TRAP=y
Actual value:
Fix this by including UBSAN config.
Fixes: c75be56e35 ("lkdtm/bugs: Add ARRAY_BOUNDS to selftests")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
CONFIG_HARDENED_USERCOPY_FALLBACK config option has been removed in
commit 53944f171a ("mm: remove HARDENED_USERCOPY_FALLBACK"). Remove it
from the lkdtm selftest config.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Selftests need kernel headers and glibc for compilation. In compilation
of selftests, uapi headers from kernel source are used instead of
default ones while glibc has already been compiled with different header
files installed in the operating system. So there can be redefination
warnings from compiler. These warnings can be suppressed by using
-isystem to include the uapi headers.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The defination of swap() is used from kernel's internal header when this
test is built in source tree. The build fails when this test is built
out of source tree as defination of swap() isn't found. Selftests
shouldn't depend on kernel's internal header files. They can only depend
on uapi header files. Add the defination of swap() to fix the build
error:
gcc -Wall -I/linux_mainline2/build/usr/include -no-pie userfaultfd.c -lrt -lpthread -o /linux_mainline2/build/kselftest/vm/userfaultfd
userfaultfd.c: In function ‘userfaultfd_stress’:
userfaultfd.c:1530:3: warning: implicit declaration of function ‘swap’; did you mean ‘swab’? [-Wimplicit-function-declaration]
1530 | swap(area_src, area_dst);
| ^~~~
| swab
/usr/bin/ld: /tmp/cclUUH7V.o: in function `userfaultfd_stress':
userfaultfd.c:(.text+0x4d64): undefined reference to `swap'
/usr/bin/ld: userfaultfd.c:(.text+0x4d82): undefined reference to `swap'
collect2: error: ld returned 1 exit status
Fixes: 2c769ed713 ("tools/testing/selftests/vm/userfaultfd.c: use swap() to make code cleaner")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Out of tree build of this test fails if relative path of the output
directory is specified. Add the KHDR_INCLUDES to correctly reach the
headers.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Out of tree build of this test fails if relative path of the output
directory is specified. Add the KHDR_INCLUDES to correctly reach the
headers.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Out of tree build of this test fails if relative path of the output
directory is specified. Add the KHDR_INCLUDES to correctly reach the
headers.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Out of tree build of this test fails if relative path of the output
directory is specified. Add the KHDR_INCLUDES to correctly reach the
headers.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Mickaël Salaün <mic@linux.microsoft.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Out of tree build of this test fails if relative path of the output
directory is specified. Add KHDR_INCLUDES to correctly reach the
headers.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Out of tree build of this test fails if relative path of the output
directory is specified. KBUILD_OUTPUT also doesn't point to the correct
directory when relative path is used. Thus out of tree builds fail.
Remove the un-needed include paths and use KHDR_INCLUDES to correctly
reach the headers.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
uapi headers should be installed at the top of the object tree,
"<obj_tree>/usr/include". There is no need for kernel headers to
be present at kselftest build directory, "<obj_tree>/kselftest/usr/
include" as well. This duplication can be avoided by correctly
specifying the INSTALL_HDR_PATH.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Kernel uapi headers can be present at different paths depending upon
how the build was invoked. It becomes impossible for the tests to
include the correct headers directory. Set and export KHDR_INCLUDES
variable to make it possible for sub make files to include the header
files.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The build of kselftests fails if relative path is specified through
KBUILD_OUTPUT or O=<path> method. BUILD variable is used to determine
the path of the output objects. When make is run from other directories
with relative paths, the exact path of the build objects is ambiguous
and build fails.
make[1]: Entering directory '/home/usama/repos/kernel/linux_mainline2/tools/testing/selftests/alsa'
gcc mixer-test.c -L/usr/lib/x86_64-linux-gnu -lasound -o build/kselftest/alsa/mixer-test
/usr/bin/ld: cannot open output file build/kselftest/alsa/mixer-test
Set the BUILD variable to the absolute path of the output directory.
Make the logic readable and easy to follow. Use spaces instead of tabs
for indentation as if with tab indentation is considered recipe in make.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If only futex selftest is compiled, uapi header files are copied to the
selftests/futex/functional directory. This copy isn't needed. Set the
DEFAULT_INSTALL_HDR_PATH variable to 1 to use the default header install
path only. This removes extra copy of header file.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Some testcases allow for optional commandline parameters but as of now
there is now way to provide such arguments to the runner script.
Add support to retrieve such optional command parameters fron environment
variables named so as to include the all-uppercase test executable name,
sanitized substituting any non-acceptable varname characters with "_",
following the pattern:
KSELFTEST_<UPPERCASE_SANITIZED_TEST_NAME>_ARGS="options"
Optional command parameters support is not available if 'tr' is not
installed on the test system.
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The check in the last return statement is unnecessary, we can just return
the ret variable.
But we can simplify the function further by returning 0 immediately if we
find the section size and -ENOENT otherwise.
Thus we can also remove the ret variable.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220223085244.3058118-1-ytcoode@gmail.com
This commit fixes a compilation error on systems with glibc < 2.26 [0]:
```
In file included from main.h:14:0,
from gen.c:24:
linux/tools/include/tools/libc_compat.h:11:21: error: attempt to use poisoned "reallocarray"
static inline void *reallocarray(void *ptr, size_t nmemb, size_t size)
```
This happens because gen.c pulls <bpf/libbpf_internal.h>, and then
<tools/libc_compat.h> (through main.h). When
COMPAT_NEED_REALLOCARRAY is set, libc_compat.h defines reallocarray()
which libbpf_internal.h poisons with a GCC pragma.
This commit reuses libbpf_reallocarray() implemented in commit
029258d7b2 ("libbpf: Remove any use of reallocarray() in libbpf").
v1 -> v2:
- reuse libbpf_reallocarray() instead of reimplementing it
Fixes: a9caaba399 ("bpftool: Implement "gen min_core_btf" logic")
Reported-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220221125617.39610-1-mauricio@kinvolk.io
[0]: https://lore.kernel.org/bpf/3bf2bd49-9f2d-a2df-5536-bc0dde70a83b@isovalent.com/
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEjUuTAak14xi+SF7M4CHKc/GJqRAFAmIV/fQACgkQ4CHKc/GJ
qRBhaAgAoz81fjhlkcCaHdgxVTEx6L93iJQJiZWoE3gTKk2jruun3sIYmPSOiY+b
bWR1datDnvaS/Xv04rZ6pm6XPjCT+LmrOQCOlZMjptc6HKoKuDZTvcQ0u5CYOfQS
I9ZRtPaHjSmhntS8BErxGes5+PF1hz/q2rGuODt4/DQCNPZNdHXMdym9w4Z4xHXm
TuH2VXzv5JXhYlUEDz2HP8LXmbvxA9rGaMgngpX92pCL8uTLqANoZCT+zHEj3cKw
db6/A8S7Y4PsfF0JphNup+wcsWj+yfIrfAQwnTgNXR4hlhbUxOHTJqXlQGK/NW7C
tg2nXxQQn14MwPlkatdxFYzg1TbMYg==
=U6Fu
-----END PGP SIGNATURE-----
Merge tag 'slab-for-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Build fix (workaround) for clang.
- Fix a /proc/kcore based slabinfo script broken by struct slab changes
in 5.17-rc1.
* tag 'slab-for-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
tools/cgroup/slabinfo: update to work with struct slab
slab: remove __alloc_size attribute from __kmalloc_track_caller
The existing API perf_thread_map__new_dummy() allocates new thread map
for one thread. I couldn't find a way to reallocate the map with more
threads, or to allocate a new map for more than one thread.
Having multiple threads in a thread map is essential for some use cases.
That's why a new API is proposed, which allocates a new thread map for
given number of threads: perf_thread_map__new_array()
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/linux-perf-users/20220221102628.43904-1-tz.stoyanov@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "int thread" input arguments of some perf_thead_map APIs are index
of the thread in the thread map.
In order to avoid confusion and to make the APIs consistent with
perf_cpu_map APIs, those arguments are renamed to "int idx".
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220221102612.43879-1-tz.stoyanov@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
livepatch has a set of selftests that are used to validate the behavior of
the livepatching subsystem. One of the testcases in the livepatch
testsuite is test-ftrace.sh, which among other things, validates that
livepatching gracefully fails when ftrace is disabled. In the event that
ftrace cannot be disabled using 'sysctl kernel.ftrace_enabled=0', the test
will fail later due to it unexpectedly successfully loading the
test_klp_livepatch module.
While the livepatch selftests are careful to remove any of the livepatch
test modules between testcases to avoid this situation, ftrace may still
fail to be disabled if another trace is active on the system that was
enabled with FTRACE_OPS_FL_PERMANENT. For example, any active BPF programs
that use trampolines will cause this test to fail due to the trampoline
being implemented with register_ftrace_direct(). The following is an
example of such a trace:
tcp_drop (1) R I D tramp: ftrace_regs_caller+0x0/0x58
(call_direct_funcs+0x0/0x30)
direct-->bpf_trampoline_6442550536_0+0x0/0x1000
In order to make the test more resilient to system state that is out of its
control, this patch updates set_ftrace_enabled() to detect sysctl failures,
and skip the testrun when appropriate.
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220216161100.3243100-1-void@manifault.com
These tests check that the basic locked port feature works, so that
no 'host' can communicate (ping) through a locked port unless the
MAC address of the 'host' interface is in the forwarding database of
the bridge.
Signed-off-by: Hans Schultz <schultz.hans+netdev@gmail.com>
Acked-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When recording SPE traces, the default sample_period is currently being
set to 1 in the perf_event_attr fields, instead of the value advertised
in '/sys/devices/arm_spe_0/caps/min_interval':
Before:
$ perf record -e arm_spe// -vv -- sleep 1
[...]
{ sample_period, sample_freq } 1
[...]
Use the value from the above sysfs location as a more sensible default
(it was already being read, but the value not being used)
After:
$ perf record -e arm_spe// -vv -- sleep 1
[...]
{ sample_period, sample_freq } 1024
[...]
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220221171042.58460-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
AMD P-State kernel module is using the fine grain frequency instead of
acpi hardware pstate. So add a function to print performance and
frequency values.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The print_speed can be as a common function, and expose it into misc
helper header. Then it can be used on other helper files as well.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The legacy ACPI hardware P-States function has 3 P-States on ACPI table,
the CPU frequency only can be switched between the 3 P-States. While the
processor supports the boost state, it will have another boost state
that the frequency can be higher than P0 state, and the state can be
decoded by the function of decode_pstates() and read by
amd_pci_get_num_boost_states().
However, the new AMD P-State function is different than legacy ACPI
hardware P-State on AMD processors. That has a finer grain frequency
range between the highest and lowest frequency. And boost frequency is
actually the frequency which is mapped on highest performance ratio. The
similar previous P0 frequency is mapped on nominal performance ratio.
If the highest performance on the processor is higher than nominal
performance, then we think the current processor supports the boost
state. And it uses amd_pstate_boost_init() to initialize boost for AMD
P-State function.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Introduce the marco definitions and access helper function for
AMD P-State sysfs interfaces such as each performance goals and frequency
levels in amd helper file. They will be used to read the sysfs attribute
from AMD P-State cpufreq driver for cpupower utilities.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Kernel ACPI subsytem introduced the sysfs attributes for acpi cppc
library in below path:
/sys/devices/system/cpu/cpuX/acpi_cppc/
And these attributes will be used for AMD P-State driver to provide some
performance and frequency values.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Expose the helper into cpufreq header, then cpufreq driver can use this
function to get the sysfs value if it has any specific sysfs interfaces.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If kernel starts the AMD P-State module, the cpupower will initial the
capability flag as CPUPOWER_CAP_AMD_PSTATE. And once AMD P-State
capability is set, it won't need to set legacy ACPI relative
capabilities anymore.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The processor with AMD P-State function also supports legacy ACPI
hardware P-States feature as well. Once driver sets AMD P-State eanbled,
the processor will respond the finer grain AMD P-State feature instead of
legacy ACPI P-States. So it introduces the cpupower_amd_pstate_enabled()
to check whether the current kernel enables AMD P-State or AMD CPUFreq
module.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add AMD P-State capability flag in cpupower to indicate AMD new P-State
kernel module support on Ryzen processors.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add option to shift the clock by a specified number of nanoseconds.
The new argument -n will specify the number of nanoseconds to add to the
ptp clock. Since the API doesn't support negative shifts those needs to
be calculated by subtracting full seconds and adding a nanosecond offset.
Signed-off-by: Maciek Machnikowski <maciek@machnikowski.net>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20220221200637.125595-1-maciek@machnikowski.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The option `--to-ctf` is only available when perf has libbabeltrace
support. Hence, on error, we shouldn't state that user must include
`--to-ctf` unless it's supported.
The only user-visible change for this commit is that when `perf` is not
configured to support libbabeltrace, the user is only prompted to
provide the `--to-json` option instead of bothe `--to-json` and
`--to-ctf`.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220220113952.138280-1-ma.mandourr@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In SPE traces the 'weight' field can't be printed in 'perf script'
because the 'dummy:u' event doesn't have the WEIGHT attribute set.
Use evsel__do_check_stype(..) to check this field, as it's done with
other fields such as "phys_addr".
Before:
$ perf record -e arm_spe_0// -- sleep 1
$ perf script -F event,ip,weight
Samples for 'dummy:u' event do not have WEIGHT attribute set. Cannot print 'weight' field.
After:
$ perf script -F event,ip,weight
l1d-access: 12 ffffaf629d4cb320
tlb-access: 12 ffffaf629d4cb320
memory: 12 ffffaf629d4cb320
Fixes: b0fde9c6e2 ("perf arm-spe: Add SPE total latency as PERF_SAMPLE_WEIGHT")
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220221171707.62960-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add proper return codes for all cases of data directory creation failure
and add error message output based on these codes.
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220222091417.11020-1-alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf_data__create_dir() fails, it calls close_dir(), but
perf_session__delete() also calls close_dir() and since dir.version and
dir.nr were initialized by perf_data__create_dir(), a double free occurs.
This patch moves the initialization of dir.version and dir.nr after
successful initialization of dir.files, that prevents double freeing.
This behavior is already implemented in perf_data__open_dir().
Fixes: 1455206311 ("perf data: Add perf_data__(create_dir|close_dir) functions")
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220218152341.5197-2-alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The check 't->size && t->size != size' is redundant because if t->size
compares unequal to 0, we will just skip straight to sorting variables.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220220072750.209215-1-ytcoode@gmail.com
- add Claudio as Maintainer
- first step to do proper storage key checking
- testcase for missing memop check
-----BEGIN PGP SIGNATURE-----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=qGQI
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Changes for 5.18 part1
- add Claudio as Maintainer
- first step to do proper storage key checking
- testcase for missing memop check
Now that all aliases are defined using SYM_FUNC_ALIAS(), remove the old
SYM_FUNC_{START,END}_ALIAS() macros.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220216162229.1076788-5-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Now that we have SYM_FUNC_ALIAS() and SYM_FUNC_ALIAS_WEAK(), use those
to simplify the definition of function aliases across arch/x86.
For clarity, where there are multiple annotations such as
EXPORT_SYMBOL(), I've tried to keep annotations grouped by symbol. For
example, where a function has a name and an alias which are both
exported, this is organised as:
SYM_FUNC_START(func)
... asm insns ...
SYM_FUNC_END(func)
EXPORT_SYMBOL(func)
SYM_FUNC_ALIAS(alias, func)
EXPORT_SYMBOL(alias)
Where there are only aliases and no exports or other annotations, I have
not bothered with line spacing, e.g.
SYM_FUNC_START(func)
... asm insns ...
SYM_FUNC_END(func)
SYM_FUNC_ALIAS(alias, func)
The tools/perf/ copies of memset_64.S and memset_64.S are updated
likewise to avoid the build system complaining these are mismatched:
| Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
| diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
| Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S'
| diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220216162229.1076788-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently aliasing an asm function requires adding START and END
annotations for each name, as per Documentation/asm-annotations.rst:
SYM_FUNC_START_ALIAS(__memset)
SYM_FUNC_START(memset)
... asm insns ...
SYM_FUNC_END(memset)
SYM_FUNC_END_ALIAS(__memset)
This is more painful than necessary to maintain, especially where a
function has many aliases, some of which we may wish to define
conditionally. For example, arm64's memcpy/memmove implementation (which
uses some arch-specific SYM_*() helpers) has:
SYM_FUNC_START_ALIAS(__memmove)
SYM_FUNC_START_ALIAS_WEAK_PI(memmove)
SYM_FUNC_START_ALIAS(__memcpy)
SYM_FUNC_START_WEAK_PI(memcpy)
... asm insns ...
SYM_FUNC_END_PI(memcpy)
EXPORT_SYMBOL(memcpy)
SYM_FUNC_END_ALIAS(__memcpy)
EXPORT_SYMBOL(__memcpy)
SYM_FUNC_END_ALIAS_PI(memmove)
EXPORT_SYMBOL(memmove)
SYM_FUNC_END_ALIAS(__memmove)
EXPORT_SYMBOL(__memmove)
SYM_FUNC_START(name)
It would be much nicer if we could define the aliases *after* the
standard function definition. This would avoid the need to specify each
symbol name twice, and would make it easier to spot the canonical
function definition.
This patch adds new macros to allow us to do so, which allows the above
example to be rewritten more succinctly as:
SYM_FUNC_START(__pi_memcpy)
... asm insns ...
SYM_FUNC_END(__pi_memcpy)
SYM_FUNC_ALIAS(__memcpy, __pi_memcpy)
EXPORT_SYMBOL(__memcpy)
SYM_FUNC_ALIAS_WEAK(memcpy, __memcpy)
EXPORT_SYMBOL(memcpy)
SYM_FUNC_ALIAS(__pi_memmove, __pi_memcpy)
SYM_FUNC_ALIAS(__memmove, __pi_memmove)
EXPORT_SYMBOL(__memmove)
SYM_FUNC_ALIAS_WEAK(memmove, __memmove)
EXPORT_SYMBOL(memmove)
The reduction in duplication will also make it possible to replace some
uses of WEAK with more accurate Kconfig guards, e.g.
#ifndef CONFIG_KASAN
SYM_FUNC_ALIAS(memmove, __memmove)
EXPORT_SYMBOL(memmove)
#endif
... which should make it easier to ensure that symbols are neither used
nor overidden unexpectedly.
The existing SYM_FUNC_START_ALIAS() and SYM_FUNC_START_LOCAL_ALIAS() are
marked as deprecated, and will be removed once existing users are moved
over to the new scheme.
The tools/perf/ copy of linkage.h is updated to match. A subsequent
patch will depend upon this when updating the x86 asm annotations.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220216162229.1076788-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Add KVM_CAP_PPC_AIL_MODE_3 to advertise the capability to set the AIL
resource mode to 3 with the H_SET_MODE hypercall. This capability
differs between processor types and KVM types (PR, HV, Nested HV), and
affects guest-visible behaviour.
QEMU will implement a cap-ail-mode-3 to control this behaviour[1], and
use the KVM CAP if available to determine KVM support[2].
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This test tries to pass a PTR_TO_BTF_ID_OR_NULL to the release function,
which would trigger a out of bounds access without the fix in commit
45ce4b4f90 ("bpf: Fix crash due to out of bounds access into reg2btf_ids.")
but after the fix, it should only index using base_type(reg->type),
which should be less than __BPF_REG_TYPE_MAX, and also not permit any
type flags to be set for the reg->type.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220220023138.2224652-1-memxor@gmail.com
Some accelerometers that support activity and inactivity
events also support a referenced mode, in which the
gravitational acceleration is taken as a point of
reference before comparing the acceleration to the
specified activity and inactivity magnitude.
For example, in the case of the ADXL367, for activity
detection, the formula is:
abs(acceleration - reference) > magnitude
Add a new event type that makes this behavior clear.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Link: https://lore.kernel.org/r/20220214073810.781016-2-cosmin.tanislav@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch add a new bonding option ns_ip6_target, which correspond
to the arp_ip_target. With this we set IPv6 targets and send IPv6 NS
request to determine the health of the link.
For other related options like the validation, we still use
arp_validate, and will change to ns_validate later.
Note: the sysfs configuration support was removed based on
https://lore.kernel.org/netdev/8863.1645071997@famine
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmISrYgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGg20IAKDZr7rfSHBopjQV
Cocw744tom0XuxpvSZpp2GGOOXF+tkswcNNaRIrbGOl1mkyxA7eBZCTMpDeDS9aQ
wB0D0Gxx8QBAJp4KgB1W7TB+hIGes/rs8Ve+6iO4ulLLdCVWX/q2boI0aZ7QX9O9
qNi8OsoZQtk6falRvciZFHwV5Av1p2Sy1AW57udQ7DvJ4H98AfKf1u8/z208WWW8
1ixC+qJxQcUcM9vI+7P9Tt7NbFSKv8SvAmqjFY7P+DxQAsVw6KXoqVXykDzeOv0t
fUNOE/t0oFZafwtn8h7KBQnwS9lH03+3KkslVZs+iMFyUj/Bar+NVVyKoDhWXtVg
/PuMhEg=
=eU1o
-----END PGP SIGNATURE-----
Merge tag 'v5.17-rc5' into sched/core, to resolve conflicts
New conflicts in sched/core due to the following upstream fixes:
44585f7bc0 ("psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n")
a06247c680 ("psi: Fix uaf issue when psi trigger is destroyed while being polled")
Conflicts:
include/linux/psi_types.h
kernel/sched/psi.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The RETPOLINE_AMD name is unfortunate since it isn't necessarily
AMD only, in fact Hygon also uses it. Furthermore it will likely be
sufficient for some Intel processors. Therefore rename the thing to
RETPOLINE_LFENCE to better describe what it is.
Add the spectre_v2=retpoline,lfence option as an alias to
spectre_v2=retpoline,amd to preserve existing setups. However, the output
of /sys/devices/system/cpu/vulnerabilities/spectre_v2 will be changed.
[ bp: Fix typos, massage. ]
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Add checks for removing a region from reserved memory in different
scenarios:
- The requested region matches one in the collection of reserved
memory regions
- The requested region does not exist in memblock.reserved
- The region overlaps with one of the entries: from the top (its
end address is bigger than the base of the existing region) or
from the bottom (its base address is smaller than the end address
of one of the regions)
- The region is within an already defined region
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/30af95c82754ad8029404c3b528a5ef1c05d1ed6.1643796665.git.karolinadrobnik@gmail.com
Add checks for removing a region from available memory in different
scenarios:
- The requested region matches one in the collection of available
memory regions
- The requested region does not exist in memblock.memory
- The region overlaps with one of the entries: from the top (its end
address is bigger than the base of the existing region) or from the
bottom (its base address is smaller than the end address of one of
the regions)
- The region is within an already defined region
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/8e6aa005407bbe1a75b75e85ac04ebb51318a52a.1643796665.git.karolinadrobnik@gmail.com
Add checks for marking a region as reserved in different scenarios:
- The region does not overlap with existing entries
- The region overlaps with one of the previous entries: from the top
(its end address is bigger than the base of the existing region) or
from the bottom (its base address is smaller than the end address of
one of the regions)
- The region is within an already defined region
- The same region is marked as reserved twice
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/cac867d2b6c17e53d9e977b5d6cd88cc4e9453b6.1643796665.git.karolinadrobnik@gmail.com
Add checks for adding a new region in different scenarios:
- The region does not overlap with existing entries
- The region overlaps with one of the previous entries: from the top
(its end address is bigger than the base of the existing region) or
from the bottom (its base address is smaller than the end address of
one of the regions)
- The region is within an already defined region
- The same region is added twice to the collection of available memory
regions
Add checks for memblock initialization to verify it sets memblock data
structures to expected values.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/b6c26525025bccec0bf7419473d4d1293eb82b3b.1643796665.git.karolinadrobnik@gmail.com
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYhDJyQAKCRCRxhvAZXjc
oqDZAP47lp7dQhndp5AuIsoeL/YIqbhFNfJ8hVUAcbFx/wJPFAEAtwXoeVXWT2ms
pU4nafoaQOpgsZJnD0UC5B/Pkr6laQ4=
=N5oo
-----END PGP SIGNATURE-----
Merge tag 'fs.mount_setattr.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull mount_setattr test/doc fixes from Christian Brauner:
"This contains a fix for one of the selftests for the mount_setattr
syscall to create idmapped mounts, an entry for idmapped mounts for
maintainers, and missing kernel documentation for the helper we split
out some time ago to get and yield write access to a mount when
changing mount properties"
* tag 'fs.mount_setattr.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fs: add kernel doc for mnt_{hold,unhold}_writers()
MAINTAINERS: add entry for idmapped mounts
tests: fix idmapped mount_setattr test
There turned out to be a few problems with btfgen selftests.
First, core_btfgen tests are failing in BPF CI due to the use of
full-featured bpftool, which has extra dependencies on libbfd, libcap,
etc, which are present in BPF CI's build environment, but those shared
libraries are missing in QEMU image in which test_progs is running.
To fix this problem, use minimal bootstrap version of bpftool instead.
It only depend on libelf and libz, same as libbpf, so doesn't add any
new requirements (and bootstrap bpftool still implementes entire
`bpftool gen` functionality, which is quite convenient).
Second problem is even more interesting. Both core_btfgen and core_reloc
reuse the same set of struct core_reloc_test_case array of test case
definitions. That in itself is not a problem, but btfgen test replaces
test_case->btf_src_file property with the path to temporary file into
which minimized BTF is output by bpftool. This interferes with original
core_reloc tests, depending on order of tests execution (core_btfgen is
run first in sequential mode and skrews up subsequent core_reloc run by
pointing to already deleted temporary file, instead of the original BTF
files) and whether those two runs share the same process (in parallel
mode the chances are high for them to run in two separate processes and
so not interfere with each other).
To prevent this interference, create and use local copy of a test
definition. Mark original array as constant to catch accidental
modifcations. Note that setup_type_id_case_success() and
setup_type_id_case_success() still modify common test_case->output
memory area, but it is ok as each setup function has to re-initialize it
completely anyways. In sequential mode it leads to deterministic and
correct initialization. In parallel mode they will either each have
their own process, or if core_reloc and core_btfgen happen to be run by
the same worker process, they will still do that sequentially within the
worker process. If they are sharded across multiple processes, they
don't really share anything anyways.
Also, rename core_btfgen into core_reloc_btfgen, as it is indeed just
a "flavor" of core_reloc test, not an independent set of tests. So make
it more obvious.
Last problem that needed solving was that location of bpftool differs
between test_progs and test_progs' flavors (e.g., test_progs-no_alu32).
To keep it simple, create a symlink to bpftool both inside
selftests/bpf/ directory and selftests/bpf/<flavor> subdirectory. That
way, from inside core_reloc test, location to bpftool is just "./bpftool".
v2->v3:
- fix bpftool location relative the test_progs-no_alu32;
v1->v2:
- fix corruption of core_reloc_test_case.
Fixes: 704c91e59f ("selftests/bpf: Test "bpftool gen min_core_btf")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yucong Sun <sunyucong@gmail.com>
Link: https://lore.kernel.org/bpf/20220220042720.3336684-1-andrii@kernel.org
Memblock simulator needs to be able to reset memblock data structures
between different test cases. Add a function that sets all fields to
their default values.
Add a test checking if memblock is being initialized to expected values.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/8c185aa7e0dd68c2c7e937c9a06c90ae413e240f.1643796665.git.karolinadrobnik@gmail.com
Build the kernel and selftest with clang compiler with LLVM=1,
make -j LLVM=1
make -C tools/testing/selftests/bpf -j LLVM=1
I hit the following selftests/bpf compilation error:
In file included from test_cpp.cpp:3:
/.../tools/testing/selftests/bpf/tools/include/bpf/libbpf.h:73:8:
error: 'relaxed_core_relocs' is deprecated: libbpf v0.6+: field has no effect [-Werror,-Wdeprecated-declarations]
struct bpf_object_open_opts {
^
test_cpp.cpp:56:2: note: in implicit move constructor for 'bpf_object_open_opts' first required here
LIBBPF_OPTS(bpf_object_open_opts, opts);
^
/.../tools/testing/selftests/bpf/tools/include/bpf/libbpf_common.h:77:3: note: expanded from macro 'LIBBPF_OPTS'
(struct TYPE) { \
^
/.../tools/testing/selftests/bpf/tools/include/bpf/libbpf.h:90:2: note: 'relaxed_core_relocs' has been explicitly marked deprecated here
LIBBPF_DEPRECATED_SINCE(0, 6, "field has no effect")
^
/.../tools/testing/selftests/bpf/tools/include/bpf/libbpf_common.h:24:4: note: expanded from macro 'LIBBPF_DEPRECATED_SINCE'
(LIBBPF_DEPRECATED("libbpf v" # major "." # minor "+: " msg))
^
/.../tools/testing/selftests/bpf/tools/include/bpf/libbpf_common.h:19:47: note: expanded from macro 'LIBBPF_DEPRECATED'
#define LIBBPF_DEPRECATED(msg) __attribute__((deprecated(msg)))
There are two ways to fix the issue, one is to use GCC diagnostic ignore pragma, and the
other is to open code bpf_object_open_opts instead of using LIBBPF_OPTS.
Since in general LIBBPF_OPTS is preferred, the patch fixed the issue by
adding proper GCC diagnostic ignore pragmas.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220217194005.2765348-1-yhs@fb.com
Since commit 2843ff6f36 ("mptcp: remote addresses fullmesh"), an
MPTCP client can attempt creating multiple MPJ subflow simultaneusly.
In such scenario the server, when syncookies are enabled, could end-up
accepting incoming MPJ syn even above the configured subflow limit, as
the such limit can be enforced in a reliable way only after the subflow
creation. In case of syncookie, only after the 3rd ack reception.
As a consequence the related self-tests case sporadically fails, as it
verify that the server always accept the expected number of MPJ syn.
Address the issues relaxing the MPJ syn number constrain. Note that the
check on the accepted number of MPJ 3rd ack still remains intact.
Fixes: 2843ff6f36 ("mptcp: remote addresses fullmesh")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The in kernel MPTCP PM implementation can process a single
incoming add address option at any given time. In the
mentioned test the server can surpass such limit. Let the
setup cope with that allowing a faster add_addr retransmission.
Fixes: a88c9e4969 ("mptcp: do not block subflows creation on errors")
Fixes: f7efc7771e ("mptcp: drop argument port from mptcp_pm_announce_addr")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/254
Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mentioned test has to wait for a subflow creation failure.
The current code looks for TCP sockets in TW state and sometimes
misses the relevant event. Switch to a more stable check, looking
for the associated mib counter.
Fixes: 46e967d187 ("selftests: mptcp: add tests for subflow creation failure")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/257
Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of waiting for an arbitrary amount of time for the MPTCP
MP_CAPABLE handshake to complete, explicitly wait for the relevant
socket to enter into the established status.
Additionally let the data transfer application use the slowest
transfer mode available (-r), to cope with very slow host, or
high jitter caused by hosting VMs.
Fixes: df62f2ec3d ("selftests/mptcp: add diag interface tests")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/258
Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'perf record' and 'perf stat' commands have supported the option
'-C/--cpus' to count or collect only on the list of CPUs provided.
Commit 1d3351e631 ("perf tools: Enable on a list of CPUs for
hybrid") add it to be supported for hybrid. For hybrid support, it
checks the cpu list are available on hybrid PMU. But when we test only
uncore events(or events not in cpu_core and cpu_atom), there is a bug:
Before:
# perf stat -C0 -e uncore_clock/clockticks/ sleep 1
failed to use cpu list 0
In this case, for uncore event, its pmu_name is not cpu_core or
cpu_atom, so in evlist__fix_hybrid_cpus, perf_pmu__find_hybrid_pmu
should return NULL,both events_nr and unmatched_count should be 0 ,then
the cpu list check function evlist__fix_hybrid_cpus return -1 and the
error "failed to use cpu list 0" will happen. Bypass "events_nr=0" case
then the issue is fixed.
After:
# perf stat -C0 -e uncore_clock/clockticks/ sleep 1
Performance counter stats for 'CPU(s) 0':
195,476,873 uncore_clock/clockticks/
1.004518677 seconds time elapsed
When testing with at least one core event and uncore events, it has no
issue.
# perf stat -C0 -e cpu_core/cpu-cycles/,uncore_clock/clockticks/ sleep 1
Performance counter stats for 'CPU(s) 0':
5,993,774 cpu_core/cpu-cycles/
301,025,912 uncore_clock/clockticks/
1.003964934 seconds time elapsed
Fixes: 1d3351e631 ("perf tools: Enable on a list of CPUs for hybrid")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: alexander.shishkin@intel.com
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220218093127.1844241-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Skip the Sigtrap test for arm + arm64, same as was done for s390 in
commit a840974e96 ("perf test: Test 73 Sig_trap fails on s390"). For
this, reuse BP_SIGNAL_IS_SUPPORTED - meaning that the arch can use BP to
generate signals - instead of BP_ACCOUNT_IS_SUPPORTED, which is
appropriate.
As described by Will at [0], in the test we get stuck in a loop of
handling the HW breakpoint exception and never making progress. GDB
handles this by stepping over the faulting instruction, but with perf
the kernel is expected to handle the step (which it doesn't for arm).
Dmitry made an attempt to get this work, also mentioned in the same
thread as [0], which was appreciated. But the best thing to do is skip
the test for now.
[0] https://lore.kernel.org/linux-perf-users/20220118124343.GC98966@leoy-ThinkPad-X240s/T/#m13b06c39d2a5100d340f009435df6f4d8ee57b5a
Fixes: 5504f67944 ("perf test sigtrap: Add basic stress test for sigtrap handling")
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Marco Elver <elver@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux@armlinux.org.uk
Link: https://lore.kernel.org/r/1645176813-202756-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I managed to get hold of a machine that has SEV but not SEV-ES, and
sev_migrate_tests fails because sev_vm_create(true) returns ENOTTY.
Fix this, and while at it also return KSFT_SKIP on machines that do
not have SEV at all, instead of returning 0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For SEV-ES VMs with mirrors to be intra-host migrated they need to be
able to migrate with the mirror. This is due to that fact that all VMSAs
need to be added into the VM with LAUNCH_UPDATE_VMSA before
lAUNCH_FINISH. Allowing migration with mirrors allows users of SEV-ES to
keep the mirror VMs VMSAs during migration.
Adds a list of mirror VMs for the original VM iterate through during its
migration. During the iteration the owner pointers can be updated from
the source to the destination. This fixes the ASID leaking issue which
caused the blocking of migration of VMs with mirrors.
Signed-off-by: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <20220211193634.3183388-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch added the data checksum error mib counters check for the
script mptcp_connect.sh when the data checksum is enabled.
In do_transfer(), got the mib counters twice, before and after running
the mptcp_connect commands. The latter minus the former is the actual
number of the data checksum mib counter.
The output looks like this:
ns1 MPTCP -> ns2 (dead:beef:1::2:10007) MPTCP (duration 86ms) [ OK ]
ns1 MPTCP -> ns2 (10.0.2.1:10008 ) MPTCP (duration 66ms) [ FAIL ]
server got 1 data checksum error[s]
Fixes: 94d66ba1d8 ("selftests: mptcp: enable checksum in mptcp_connect.sh")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/255
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To allow showing the 'help' menu even if these tools are not available.
While at it, also avoid launching the command then checking $?. Instead,
the check is directly done in the 'if'.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These tmp files will only be created when a test will be launched.
This avoid 'dd' output when '-h' is used for example.
While at it, also avoid creating netns that will be removed when
starting the first test.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shellcheck found that these variables were set but never used.
Note that rndh is no longer prefixed with '0-' but it doesn't change
anything.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With an error if it is an unknown option.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch simplified pm_nl_change_endpoint(), using id-based address
lookups only. And dropped the fragile way of parsing 'addr' and 'id'
from the output of pm_nl_show_endpoints().
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the increase number of tests, one CI instance, using a debug kernel
config and not recent hardware, takes around 10 minutes to execute the
slowest MPTCP test: mptcp_join.sh.
Even if most CIs don't take that long to execute these tests --
typically max 10 minutes to run all selftests -- it will help some of
them if the timeout is increased.
The timeout could be disabled but it is always good to have an extra
safeguard, just in case.
Please note that on slow public CIs with kernel debug settings, it has
been observed it can easily take up to 45 minutes to execute all tests
in this very slow environment with other jobs running in parallel.
The slowest test, mptcp_join.sh takes ~30 minutes in this case.
In such environments, the selftests timeout set in the 'settings' file
is disabled because this environment is known as being exceptionnally
slow. It has been decided not to take such exceptional environments into
account and set the timeout to 20min.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
bpf-next 2022-02-17
We've added 29 non-merge commits during the last 8 day(s) which contain
a total of 34 files changed, 1502 insertions(+), 524 deletions(-).
The main changes are:
1) Add BTFGen support to bpftool which allows to use CO-RE in kernels without
BTF info, from Mauricio Vásquez, Rafael David Tinoco, Lorenzo Fontana and
Leonardo Di Donato. (Details: https://lpc.events/event/11/contributions/948/)
2) Prepare light skeleton to be used in both kernel module and user space
and convert bpf_preload.ko to use light skeleton, from Alexei Starovoitov.
3) Rework bpftool's versioning scheme and align with libbpf's version number;
also add linked libbpf version info to "bpftool version", from Quentin Monnet.
4) Add minimal C++ specific additions to bpftool's skeleton codegen to
facilitate use of C skeletons in C++ applications, from Andrii Nakryiko.
5) Add BPF verifier sanity check whether relative offset on kfunc calls overflows
desc->imm and reject the BPF program if the case, from Hou Tao.
6) Fix libbpf to use a dynamically allocated buffer for netlink messages to
avoid receiving truncated messages on some archs, from Toke Høiland-Jørgensen.
7) Various follow-up fixes to the JIT bpf_prog_pack allocator, from Song Liu.
8) Various BPF selftest and vmtest.sh fixes, from Yucong Sun.
9) Fix bpftool pretty print handling on dumping map keys/values when no BTF
is available, from Jiri Olsa and Yinjun Zhang.
10) Extend XDP frags selftest to check for invalid length, from Lorenzo Bianconi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (29 commits)
bpf: bpf_prog_pack: Set proper size before freeing ro_header
selftests/bpf: Fix crash in core_reloc when bpftool btfgen fails
selftests/bpf: Fix vmtest.sh to launch smp vm.
libbpf: Fix memleak in libbpf_netlink_recv()
bpftool: Fix C++ additions to skeleton
bpftool: Fix pretty print dump for maps without BTF loaded
selftests/bpf: Test "bpftool gen min_core_btf"
bpftool: Gen min_core_btf explanation and examples
bpftool: Implement btfgen_get_btf()
bpftool: Implement "gen min_core_btf" logic
bpftool: Add gen min_core_btf command
libbpf: Expose bpf_core_{add,free}_cands() to bpftool
libbpf: Split bpf_core_apply_relo()
bpf: Reject kfunc calls that overflow insn->imm
selftests/bpf: Add Skeleton templated wrapper as an example
bpftool: Add C++-specific open/load/etc skeleton wrappers
selftests/bpf: Fix GCC11 compiler warnings in -O2 mode
bpftool: Fix the error when lookup in no-btf maps
libbpf: Use dynamically allocated buffer when receiving netlink messages
libbpf: Fix libbpf.map inheritance chain for LIBBPF_0.7.0
...
====================
Link: https://lore.kernel.org/r/20220217232027.29831-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This Kselftest fixes update for Linux 5.17-rc5 consists of fixes
to ftrace, exec, and seccomp tests build, run-time and install
bugs. These bugs are in the way of running the tests.
-----BEGIN PGP SIGNATURE-----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=I5xz
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to ftrace, exec, and seccomp tests build, run-time and install
bugs. These bugs are in the way of running the tests"
* tag 'linux-kselftest-fixes-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Do not trace do_softirq because of PREEMPT_RT
selftests/seccomp: Fix seccomp failure by adding missing headers
selftests/exec: Add non-regular to TEST_GEN_PROGS
Alexei Starovoitov says:
====================
pull-request: bpf 2022-02-17
We've added 8 non-merge commits during the last 7 day(s) which contain
a total of 8 files changed, 119 insertions(+), 15 deletions(-).
The main changes are:
1) Add schedule points in map batch ops, from Eric.
2) Fix bpf_msg_push_data with len 0, from Felix.
3) Fix crash due to incorrect copy_map_value, from Kumar.
4) Fix crash due to out of bounds access into reg2btf_ids, from Kumar.
5) Fix a bpf_timer initialization issue with clang, from Yonghong.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add schedule points in batch ops
bpf: Fix crash due to out of bounds access into reg2btf_ids.
selftests: bpf: Check bpf_msg_push_data return value
bpf: Fix a bpf_timer initialization issue
bpf: Emit bpf_timer in vmlinux BTF
selftests/bpf: Add test for bpf_timer overwriting crash
bpf: Fix crash due to incorrect copy_map_value
bpf: Do not try bpf_msg_push_data with len 0
====================
Link: https://lore.kernel.org/r/20220217190000.37925-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CC can have multiple sub-strings like "ccache gcc". For check_cc.sh,
CC needs to be treated like one argument. Put double quotes around it to
make CC one string and hence one argument.
Fixes: 2adcba79e6 ("selftests/x86: Add a selftest for SGX")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220214184109.3739179-3-usama.anjum@collabora.com
Add check to test if CC has a string. CC can have multiple sub-strings
like "ccache gcc". Erorr pops up if it is treated as single string and
double quotes are used around it. This can be fixed by removing the
quotes and not treating CC as a single string.
Fixes: e9886ace22 ("selftests, x86: Rework x86 target architecture detection")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220214184109.3739179-2-usama.anjum@collabora.com
netfilter.
Current release - regressions:
- dsa: lantiq_gswip: fix use after free in gswip_remove()
- smc: avoid overwriting the copies of clcsock callback functions
Current release - new code bugs:
- iwlwifi:
- fix use-after-free when no FW is present
- mei: fix the pskb_may_pull check in ipv4
- mei: retry mapping the shared area
- mvm: don't feed the hardware RFKILL into iwlmei
Previous releases - regressions:
- ipv6: mcast: use rcu-safe version of ipv6_get_lladdr()
- tipc: fix wrong publisher node address in link publications
- iwlwifi: mvm: don't send SAR GEO command for 3160 devices,
avoid FW assertion
- bgmac: make idm and nicpm resource optional again
- atl1c: fix tx timeout after link flap
Previous releases - always broken:
- vsock: remove vsock from connected table when connect is
interrupted by a signal
- ping: change destination interface checks to match raw sockets
- crypto: af_alg - get rid of alg_memory_allocated to avoid confusing
semantics (and null-deref) after SO_RESERVE_MEM was added
- ipv6: make exclusive flowlabel checks per-netns
- bonding: force carrier update when releasing slave
- sched: limit TC_ACT_REPEAT loops
- bridge: multicast: notify switchdev driver whenever MC processing
gets disabled because of max entries reached
- wifi: brcmfmac: fix crash in brcm_alt_fw_path when WLAN not found
- iwlwifi: fix locking when "HW not ready"
- phy: mediatek: remove PHY mode check on MT7531
- dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN
- dsa: lan9303:
- fix polarity of reset during probe
- fix accelerated VLAN handling
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Nrzq
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
Current release - regressions:
- dsa: lantiq_gswip: fix use after free in gswip_remove()
- smc: avoid overwriting the copies of clcsock callback functions
Current release - new code bugs:
- iwlwifi:
- fix use-after-free when no FW is present
- mei: fix the pskb_may_pull check in ipv4
- mei: retry mapping the shared area
- mvm: don't feed the hardware RFKILL into iwlmei
Previous releases - regressions:
- ipv6: mcast: use rcu-safe version of ipv6_get_lladdr()
- tipc: fix wrong publisher node address in link publications
- iwlwifi: mvm: don't send SAR GEO command for 3160 devices, avoid FW
assertion
- bgmac: make idm and nicpm resource optional again
- atl1c: fix tx timeout after link flap
Previous releases - always broken:
- vsock: remove vsock from connected table when connect is
interrupted by a signal
- ping: change destination interface checks to match raw sockets
- crypto: af_alg - get rid of alg_memory_allocated to avoid confusing
semantics (and null-deref) after SO_RESERVE_MEM was added
- ipv6: make exclusive flowlabel checks per-netns
- bonding: force carrier update when releasing slave
- sched: limit TC_ACT_REPEAT loops
- bridge: multicast: notify switchdev driver whenever MC processing
gets disabled because of max entries reached
- wifi: brcmfmac: fix crash in brcm_alt_fw_path when WLAN not found
- iwlwifi: fix locking when "HW not ready"
- phy: mediatek: remove PHY mode check on MT7531
- dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN
- dsa: lan9303:
- fix polarity of reset during probe
- fix accelerated VLAN handling"
* tag 'net-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
bonding: force carrier update when releasing slave
nfp: flower: netdev offload check for ip6gretap
ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt
ipv4: fix data races in fib_alias_hw_flags_set
net: dsa: lan9303: add VLAN IDs to master device
net: dsa: lan9303: handle hwaccel VLAN tags
vsock: remove vsock from connected table when connect is interrupted by a signal
Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname"
ping: fix the dif and sdif check in ping_lookup
net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
net: sched: limit TC_ACT_REPEAT loops
tipc: fix wrong notification node addresses
net: dsa: lantiq_gswip: fix use after free in gswip_remove()
ipv6: per-netns exclusive flowlabel checks
net: bridge: multicast: notify switchdev driver whenever MC processing gets disabled
CDC-NCM: avoid overflow in sanity checking
mctp: fix use after free
net: mscc: ocelot: fix use-after-free in ocelot_vlan_del()
bonding: fix data-races around agg_select_timer
dpaa2-eth: Initialize mutex used in one step timestamping path
...
This version allows out of band SST support, where some remote agent
changes SST profiles via some Board Management Controller.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Read HFI (Hardware Feedback Interface) events to process config level
changes in oob mode. When HFI is supported there is no need for polling
to check config level change.
Subscribe to Linux thermal netlink messages and process message:
THERMAL_GENL_EVENT_CPU_CAPABILITY_CHANGE.
This message contains cpu number, performance and energy efficiency.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
It is possible that some out of band agent changed config level. In this
case CPUs need to be online/offline to support this config change. Add
a command line option --oob, so that this tool can run as daemon and poll
for config level change and take action. The poll interval is configurable
in seconds using config option --poll-interval.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
- Fix corrupt inject files when only last branch option is enabled with ARM CoreSight ETM.
- Fix use-after-free for realloc(..., 0) in libsubcmd, found by gcc 12.
- Defer freeing string after possible strlen() on it in the BPF loader, found by gcc 12.
- Avoid early exit in 'perf trace' due SIGCHLD from non-workload processes.
- Fix arm64 perf_event_attr 'perf test's wrt --call-graph initialization.
- Fix libperf 32-bit build for 'perf test' wrt uint64_t printf.
- Fix perf_cpu_map__for_each_cpu macro in libperf, providing access to the CPU iterator.
- Sync linux/perf_event.h UAPI with the kernel sources.
- Update Jiri Olsa's email address in MAINTAINERS.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYg5q1gAKCRCyPKLppCJ+
JxbAAP9P7iIQuXecNop1ye4eLsWHYhBAJPSJdvUHwqpwGRm8HQEA2r+2tRtBcbei
3qgOY0od4Xtw1yji1YmTeQ6jmKFuMQM=
=c5Ce
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.17-2022-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix corrupt inject files when only last branch option is enabled with
ARM CoreSight ETM
- Fix use-after-free for realloc(..., 0) in libsubcmd, found by gcc 12
- Defer freeing string after possible strlen() on it in the BPF loader,
found by gcc 12
- Avoid early exit in 'perf trace' due SIGCHLD from non-workload
processes
- Fix arm64 perf_event_attr 'perf test's wrt --call-graph
initialization
- Fix libperf 32-bit build for 'perf test' wrt uint64_t printf
- Fix perf_cpu_map__for_each_cpu macro in libperf, providing access to
the CPU iterator
- Sync linux/perf_event.h UAPI with the kernel sources
- Update Jiri Olsa's email address in MAINTAINERS
* tag 'perf-tools-fixes-for-v5.17-2022-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf bpf: Defer freeing string after possible strlen() on it
perf test: Fix arm64 perf_event_attr tests wrt --call-graph initialization
libsubcmd: Fix use-after-free for realloc(..., 0)
libperf: Fix perf_cpu_map__for_each_cpu macro
perf cs-etm: Fix corrupt inject files when only last branch option is enabled
perf cs-etm: No-op refactor of synth opt usage
libperf: Fix 32-bit build for tests uint64_t printf
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
perf trace: Avoid early exit due SIGCHLD from non-workload processes
MAINTAINERS: Update Jiri's email address
Add a basic test to make sure ping sockets don't crash
with IPV6_2292* options.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test setting IPV6_HOPLIMIT via setsockopt and cmsg
across socket types.
Output without the kernel support (this series):
Case HOPLIMIT ICMP cmsg - packet data returned 1, expected 0
Case HOPLIMIT ICMP diff - packet data returned 1, expected 0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test setting IPV6_TCLASS via setsockopt and cmsg
across socket types.
Output without the kernel support (this series):
Case TCLASS ICMP cmsg - packet data returned 1, expected 0
Case TCLASS ICMP cmsg - rejection returned 0, expected 1
Case TCLASS ICMP diff - pass returned 1, expected 0
Case TCLASS ICMP diff - packet data returned 1, expected 0
Case TCLASS ICMP diff - rejection returned 0, expected 1
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test setting IPV6_DONTFRAG via setsockopt and cmsg
across socket types.
Output without the kernel support (this series):
Case DONTFRAG ICMP setsock returned 0, expected 1
Case DONTFRAG ICMP cmsg returned 0, expected 1
Case DONTFRAG ICMP both returned 0, expected 1
Case DONTFRAG ICMP diff returned 0, expected 1
FAIL - 4/24 cases failed
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
This code was transformed with the help of Coccinelle:
(next-20220214$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch)
@@
identifier S, member, array;
type T1, T2;
@@
struct S {
...
T1 member;
T2 array[
- 0
];
};
UAPI and wireless changes were intentionally excluded from this patch
and will be sent out separately.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/78
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
This was detected by the gcc in Fedora Rawhide's gcc:
50 11.01 fedora:rawhide : FAIL gcc version 12.0.1 20220205 (Red Hat 12.0.1-0) (GCC)
inlined from 'bpf__config_obj' at util/bpf-loader.c:1242:9:
util/bpf-loader.c:1225:34: error: pointer 'map_opt' may be used after 'free' [-Werror=use-after-free]
1225 | *key_scan_pos += strlen(map_opt);
| ^~~~~~~~~~~~~~~
util/bpf-loader.c:1223:9: note: call to 'free' here
1223 | free(map_name);
| ^~~~~~~~~~~~~~
cc1: all warnings being treated as errors
So do the calculations on the pointer before freeing it.
Fixes: 04f9bf2bac ("perf bpf-loader: Add missing '*' for key_scan_pos")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/lkml/Yg1VtQxKrPpS3uNA@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mark C++-specific T::open() and other methods as static inline to avoid
symbol redefinition when multiple files use the same skeleton header in
an application.
Fixes: bb8ffe61ea ("bpftool: Add C++-specific open/load/etc skeleton wrappers")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220216233540.216642-1-andrii@kernel.org
The commit e5043894b2 ("bpftool: Use libbpf_get_error() to check error")
fails to dump map without BTF loaded in pretty mode (-p option).
Fixing this by making sure get_map_kv_btf won't fail in case there's
no BTF available for the map.
Fixes: e5043894b2 ("bpftool: Use libbpf_get_error() to check error")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220216092102.125448-1-jolsa@kernel.org
This commit reuses the core_reloc test to check if the BTF files
generated with "bpftool gen min_core_btf" are correct. This introduces
test_core_btfgen() that runs all the core_reloc tests, but this time
the source BTF files are generated by using "bpftool gen min_core_btf".
The goal of this test is to check that the generated files are usable,
and not to check if the algorithm is creating an optimized BTF file.
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@aquasec.com>
Signed-off-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Signed-off-by: Leonardo Di Donato <leonardo.didonato@elastic.co>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220215225856.671072-8-mauricio@kinvolk.io
Add "min_core_btf" feature explanation and one example of how to use it
to bpftool-gen man page.
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@aquasec.com>
Signed-off-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Signed-off-by: Leonardo Di Donato <leonardo.didonato@elastic.co>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220215225856.671072-7-mauricio@kinvolk.io
The last part of the BTFGen algorithm is to create a new BTF object with
all the types that were recorded in the previous steps.
This function performs two different steps:
1. Add the types to the new BTF object by using btf__add_type(). Some
special logic around struct and unions is implemented to only add the
members that are really used in the field-based relocations. The type
ID on the new and old BTF objects is stored on a map.
2. Fix all the type IDs on the new BTF object by using the IDs saved in
the previous step.
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@aquasec.com>
Signed-off-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Signed-off-by: Leonardo Di Donato <leonardo.didonato@elastic.co>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220215225856.671072-6-mauricio@kinvolk.io
This commit implements the logic for the gen min_core_btf command.
Specifically, it implements the following functions:
- minimize_btf(): receives the path of a source and destination BTF
files and a list of BPF objects. This function records the relocations
for all objects and then generates the BTF file by calling
btfgen_get_btf() (implemented in the following commit).
- btfgen_record_obj(): loads the BTF and BTF.ext sections of the BPF
objects and loops through all CO-RE relocations. It uses
bpf_core_calc_relo_insn() from libbpf and passes the target spec to
btfgen_record_reloc(), that calls one of the following functions
depending on the relocation kind.
- btfgen_record_field_relo(): uses the target specification to mark all
the types that are involved in a field-based CO-RE relocation. In this
case types resolved and marked recursively using btfgen_mark_type().
Only the struct and union members (and their types) involved in the
relocation are marked to optimize the size of the generated BTF file.
- btfgen_record_type_relo(): marks the types involved in a type-based
CO-RE relocation. In this case no members for the struct and union types
are marked as libbpf doesn't use them while performing this kind of
relocation. Pointed types are marked as they are used by libbpf in this
case.
- btfgen_record_enumval_relo(): marks the whole enum type for enum-based
relocations.
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@aquasec.com>
Signed-off-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Signed-off-by: Leonardo Di Donato <leonardo.didonato@elastic.co>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220215225856.671072-5-mauricio@kinvolk.io
This command is implemented under the "gen" command in bpftool and the
syntax is the following:
$ bpftool gen min_core_btf INPUT OUTPUT OBJECT [OBJECT...]
INPUT is the file that contains all the BTF types for a kernel and
OUTPUT is the path of the minimize BTF file that will be created with
only the types needed by the objects.
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@aquasec.com>
Signed-off-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Signed-off-by: Leonardo Di Donato <leonardo.didonato@elastic.co>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220215225856.671072-4-mauricio@kinvolk.io
BTFGen needs to run the core relocation logic in order to understand
what are the types involved in a given relocation.
Currently bpf_core_apply_relo() calculates and **applies** a relocation
to an instruction. Having both operations in the same function makes it
difficult to only calculate the relocation without patching the
instruction. This commit splits that logic in two different phases: (1)
calculate the relocation and (2) patch the instruction.
For the first phase bpf_core_apply_relo() is renamed to
bpf_core_calc_relo_insn() who is now only on charge of calculating the
relocation, the second phase uses the already existing
bpf_core_patch_insn(). bpf_object__relocate_core() uses both of them and
the BTFGen will use only bpf_core_calc_relo_insn().
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@aquasec.com>
Signed-off-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Signed-off-by: Leonardo Di Donato <leonardo.didonato@elastic.co>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220215225856.671072-2-mauricio@kinvolk.io
The struct perf_event_attr is initialised differently in Arm64 when
recording in call-graph fp mode, so update the relevant tests, and add
two extra arm64-only tests.
Before:
$ perf test 17 -v
17: Setup struct perf_event_attr
[...]
running './tests/attr/test-record-graph-default'
expected sample_type=295, got 4391
expected sample_regs_user=0, got 1073741824
FAILED './tests/attr/test-record-graph-default' - match failure
test child finished with -1
---- end ----
After:
[...]
running './tests/attr/test-record-graph-default-aarch64'
test limitation 'aarch64'
running './tests/attr/test-record-graph-fp-aarch64'
test limitation 'aarch64'
running './tests/attr/test-record-graph-default'
test limitation '!aarch64'
excluded architecture list ['aarch64']
skipped [aarch64] './tests/attr/test-record-graph-default'
running './tests/attr/test-record-graph-fp'
test limitation '!aarch64'
excluded architecture list ['aarch64']
skipped [aarch64] './tests/attr/test-record-graph-fp'
[...]
Fixes: 7248e308a5 ("perf tools: Record ARM64 LR register automatically")
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20220125104435.2737-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
GCC 12 correctly reports a potential use-after-free condition in the
xrealloc helper. Fix the warning by avoiding an implicit "free(ptr)"
when size == 0:
In file included from help.c:12:
In function 'xrealloc',
inlined from 'add_cmdname' at help.c:24:2: subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free]
56 | ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
52 | void *ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free]
58 | ret = realloc(ptr, 1);
| ^~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
52 | void *ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
Fixes: 2f4ce5ec1d ("perf tools: Finalize subcmd independence")
Reported-by: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: linux-hardening@vger.kernel.org
Cc: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Link: http://lore.kernel.org/lkml/20220213182443.4037039-1-keescook@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tzvetomir Stoyanov reported an issue with using macro
perf_cpu_map__for_each_cpu using private perf_cpu object.
The issue is caused by recent change that wrapped cpu in struct perf_cpu
to distinguish it from cpu indexes. We need to make struct perf_cpu
public.
Add a simple test for using the perf_cpu_map__for_each_cpu macro.
Fixes: 6d18804b96 ("perf cpumap: Give CPUs their own type")
Reported-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220215153713.31395-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf inject' with Coresight data generates files that cannot be opened
when only the last branch option is specified:
perf inject -i perf.data --itrace=l -o inject.data
perf script -i inject.data
0x33faa8 [0x8]: failed to process type: 9 [Bad address]
This is because cs_etm__synth_instruction_sample() is called even when
the sample type for instructions hasn't been setup. Last branch records
are attached to instruction samples so it doesn't make sense to generate
them when --itrace=i isn't specified anyway.
This change disables all calls of cs_etm__synth_instruction_sample()
unless --itrace=i is specified, resulting in a file with no samples if
only --itrace=l is provided, rather than a bad file.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220210200620.1227232-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
sample_branches and sample_instructions are already saved in the
synth_opts struct. Other usages like synth_opts.last_branch don't save a
value, so make this more consistent by always going through synth_opts
and not saving duplicate values.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220210200620.1227232-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit a7f3713f6b ("libperf tests: Add test_stat_multiplexing test")
added printf's of 64-bit ints using %lu which doesn't work on 32-bit
builds:
tests/test-evlist.c:529:29: error: format ‘%lu’ expects argument of type \
‘long unsigned int’, but argument 4 has type ‘uint64_t’ {aka ‘long long unsigned int’} [-Werror=format=]
Use PRIu64 instead which works on both 32-bit and 64-bit systems.
Fixes: a7f3713f6b ("libperf tests: Add test_stat_multiplexing test")
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Link: https://lore.kernel.org/r/20220201213903.699656-1-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the trivial change in:
ddecd22878 ("perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures")
Just adds a comment.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The function trace__symbols_init() runs "perf-read-vdso32" and that ends up
with a SIGCHLD delivered to 'perf'. And this SIGCHLD make perf exit early.
'perf trace' should exit only if the SIGCHLD is from our workload process.
So let's use sigaction() instead of signal() to match such condition.
Committer notes:
Use memset to zero the 'struct sigaction' variable as the '= { 0 }'
method isn't accepted in many compiler versions, e.g.:
4 34.02 alpine:3.6 : FAIL clang version 4.0.0 (tags/RELEASE_400/final)
builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
struct sigaction sigchld_act = { 0 };
^
{}
builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers]
struct sigaction sigchld_act = { 0 };
^
2 errors generated.
6 32.60 alpine:3.8 : FAIL gcc version 6.4.0 (Alpine 6.4.0)
builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
struct sigaction sigchld_act = { 0 };
^
{}
builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers]
struct sigaction sigchld_act = { 0 };
^
2 errors generated.
7 34.82 alpine:3.9 : FAIL gcc version 8.3.0 (Alpine 8.3.0)
builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
struct sigaction sigchld_act = { 0 };
^
{}
builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers]
struct sigaction sigchld_act = { 0 };
^
2 errors generated.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220208140725.3947-1-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a spelling mistake in a debug message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220214093547.44590-1-colin.i.king@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Return the result from hist_entry_iter__add() directly instead of taking
this in another redundant variable.
Signed-off-by: tangmeng <tangmeng@uniontech.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220216030425.27779-1-tangmeng@uniontech.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The variable 'err' in the perf_event__process_sample() is only used in
the only one judgment statement, it is not used in other places.
So, use the return value from hist_entry_iter__add() directly instead of
taking this in another redundant variable.
Signed-off-by: tangmeng <tangmeng@uniontech.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220216030425.27779-2-tangmeng@uniontech.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add WRITE_OPD to check that you can't modify function
descriptors.
Gives the following result when function descriptors are
not protected:
lkdtm: Performing direct entry WRITE_OPD
lkdtm: attempting bad 16 bytes write at c00000000269b358
lkdtm: FAIL: survived bad write
lkdtm: do_nothing was hijacked!
Looks like a standard compiler barrier() is not enough to force
GCC to use the modified function descriptor. Had to add a fake empty
inline assembly to force GCC to reload the function descriptor.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7eeba50d16a35e9d799820e43304150225f20197.1644928018.git.christophe.leroy@csgroup.eu
When testing metric expressions we fake counter values from 1 going
upward. For some metrics this can yield negative values that are clipped
to zero, and then cause divide by zero failures.
Such clipping is questionable but may be a result of tools automatically
generating metrics. A workaround for this case is to try a second time
with counter values going in the opposite direction.
This case was seen in a metric like:
event1 / max(event2 - event3, 0)
But it may also happen in more sensible metrics like:
event1 / (event2 + event3 - 1 - event4)
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211223185622.3435128-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that a config flag for branch broadcast has been added, take it into
account when trying to deduce what the driver would have programmed the
TRCCONFIGR register to.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20220113091056.1297982-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some code in builtin-c2c.c calls bitmap_weight() to check if any bit of
a given bitmap is set.
It's better to use bitmap_empty() in that case because bitmap_empty()
stops traversing the bitmap as soon as it finds first set bit, while
bitmap_weight() counts all bits unconditionally.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Klimov <aklimov@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Laight <david.laight@aculab.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: http://lore.kernel.org/lkml/20220123183925.1052919-13-yury.norov@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the --tui command line flags dependent HAVE_SLANG_SUPPORT. This was
reported as confusing in:
https://lore.kernel.org/linux-perf-users/YevaTkzdXmFKdGpc@zx-spectrum.none/
Reported-by: xaizek <xaizek@posteo.net>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: xaizek <xaizek@posteo.net>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220123191849.3655855-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add documentation for Event Trace and TNT disable to the perf Intel PT man
page.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-26-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add sample flags to the PostgreSQL database definition and export.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-25-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add sample flags to the SQLite database definition and export.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-24-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, the transaction flag (x) is kept separate from branch flags.
Instead of doing the same for the interrupt disabled flags (D and t), add
all flags so that new flags will not need to be handled separately in the
future.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-23-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add Event Trace to the intel-pt-events.py script. This shows how to unpack
the raw data from the new sample events in a Python script.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-22-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Amend the display to include D and t flags in the same way as the x flag.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-21-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to other Intel PT synth events, display changes to the interrupt
flag represented by the MODE.Exec packet.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-20-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to other Intel PT synth events, display Event Trace events recorded
by CFE / EVD packets.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-19-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is not possible to walk the executable code without TNT packets, so
force 'quick' mode when TNT is disabled, because 'quick' mode does not walk
the code.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-18-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update sample flags to represent the state and changes to the interrupt
flag.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-17-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Synthesize an attribute event and sample events for changes to the
interrupt flag represented by the MODE.Exec packet.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-16-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Synthesize an attribute event and sample events for Intel PT Event Trace
events represented by CFE and EVD packets.
Committer notes:
Make 'struct perf_synth_intel_evd evd[]' evd[0] at the end of 'struct
perf_synth_intel_evt' as it is breaking the build with in many compilers
with (e.g. clang version 13.0.0 (Fedora 13.0.0-3.fc35)):
util/intel-pt.c:2213:31: error: field 'cfe' with variable sized type 'struct perf_synth_intel_evt' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
struct perf_synth_intel_evt cfe;
^
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-15-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The change to the MODE.Exec packet means processing must distinguish
between the old and new cases. Record the Event Trace capability flag to
make that possible.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-14-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add itrace option "I" to synthesize interrupt or similar (asynchronous)
events. This will be used for Intel PT Event Trace events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-13-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Define 2 new flags to represent:
- when interrupts are disabled (D)
- when interrupt disabling toggles (t)
This gives 4 combinations:
no flag, interrupts enabled
t interrupts were enabled but become disabled
D interrupts are disabled
Dt interrupts were disabled but become enabled
Committer notes:
Those are control flow flags, as per 'tools/perf/Documentation/perf-intel-pt.txt:
<quote>
An interesting field that is not printed by default is 'flags' which can be
displayed as follows:
perf script --itrace=ibxwpe -F+flags
The flags are "bcrosyiABExgh" which stand for branch, call, return, conditional,
system, asynchronous, interrupt, transaction abort, trace begin, trace end,
in transaction, VM-entry, and VM-exit respectively.
</quote>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-12-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to other Intel PT synth events, define a structure to hold
information about a change to the interrupt flag.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to other Intel PT synth events, define structures to hold CFE
and EVD data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As of Intel SDM (https://www.intel.com/sdm) version 076, there is a new
Intel PT feature called Event Trace which adds a bit to the existing
MODE.Exec packet to record the interrupt flag.
Previously, the MODE.Exec packet did not generate any events, so the
new processing required is practically the same as a new packet.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As of Intel SDM (https://www.intel.com/sdm) version 076, there is a new
Intel PT feature called Event Trace which requires 2 new packets CFE
(Control Flow Event) and EVD (Event Data).
Each Event Trace event is represented by a CFE packet that is preceded
by zero or more EVD packets. It may be bound to a following FUP (Flow
Update) packet that provides the IP.
Event Trace exposes details about asynchronous events. The CFE packet
contains a type field to identify one of the following:
1 INTR interrupt, fault, exception, NMI
2 IRET interrupt return
3 SMI system management interrupt
4 RSM resume from system management mode
5 SIPI startup interprocessor interrupt
6 INIT INIT signal
7 VMENTRY VM-Entry
8 VMEXIT VM-Entry
9 VMEXIT_INTR VM-Exit due to interrupt
10 SHUTDOWN Shutdown
For more details, refer to the Intel SDM, Intel Processor Trace chapter.
Add processing to the decoder for the new packets.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out clearing of FUP (Flow Update) event variables, to avoid code duplication.
Committer Notes:
From the Intel documentation:
<quote>
Flow Update Packets (FUP): FUPs provide the source IP addresses for
asynchronous events (interrupt and exceptions), as well as other cases
where the source address cannot be determined from the binary.
</quote>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tidy up config bit constants to use #define.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As of Intel SDM (https://www.intel.com/sdm) version 076, there is a new
Intel PT feature called Event Trace which adds a bit to the existing
MODE.Exec packet to record the interrupt flag. Amend the packet decoder and
packet decoder test accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As of Intel SDM (https://www.intel.com/sdm) version 076, there is a new
Intel PT feature called Event Trace which requires 2 new packets CFE and
EVD. Add them to the packet decoder and packet decoder test.
Committer notes:
I got the "Intel® 64 and IA-32 architectures software developer’s manual
combined volumes: 1, 2A, 2B, 2C, 2D, 3A, 3B, 3C, 3D, and 4" PDF at:
https://cdrdv2.intel.com/v1/dl/getContent/671200
And these new packets are described in page 3951:
<quote>
32.2.4
Event Trace is a capability that exposes details about the asynchronous
events, when they are generated, and when their corresponding software
event handler completes execution. These include:
o Interrupts, including NMI and SMI, including the interrupt vector when
defined.
o Faults, exceptions including the fault vector.
— Page faults additionally include the page fault address, when in context.
o Event handler returns, including IRET and RSM.
o VM exits and VM entries.¹
— VM exits include the values written to the “exit reason” and “exit qualification” VMCS fields.
INIT and SIPI events.
o TSX aborts, including the abort status returned for the RTM instructions.
o Shutdown.
Additionally, it provides indication of the status of the Interrupt Flag
(IF), to indicate when interrupts are masked.
</quote>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make test_data 'static' otherwise it will conflict with any global
variable of the same name.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* Read HW interrupt pending state from the HW
x86:
* Don't truncate the performance event mask on AMD
* Fix Xen runstate updates to be atomic when preempting vCPU
* Fix for AMD AVIC interrupt injection race
* Several other AMD fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmIL4G4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNkQQf/Z75dnmdRl8sHHnGjwH2IhWHwAg+h
5O+mJphYt4cvVMexP5dj69b7mHtKMeg/0TxPvPfwCLlhzKkW1gQFwwBAq/YuBCKw
cnMuVPeCSWo6znpS+jYUF4FAJgPKkzfFR9UwYAR5UexSWyOwU8rLcvSxj8vJjO/l
sIke+f767Ks2KgcTMIudObg+vDcgnQXI8n8ztI7hF1WJKYHdTKFkYN7BYRxQ9BW6
4fq51218DhRMv6S7so5dhYC473f+D0t8b5S/Mygur/x6mzsdQJKeOmi8aWGoDa/B
Bmse+X0lHoOkdXaxqpBgQCYeyrXohNcXx7cpGRVFnS45Jf7MLG4OfVHWNQ==
=kD2l
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Read HW interrupt pending state from the HW
x86:
- Don't truncate the performance event mask on AMD
- Fix Xen runstate updates to be atomic when preempting vCPU
- Fix for AMD AVIC interrupt injection race
- Several other AMD fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW
KVM: x86/pmu: Don't truncate the PerfEvtSeln MSR when creating a perf event
KVM: SVM: fix race between interrupt delivery and AVIC inhibition
KVM: SVM: set IRR in svm_deliver_interrupt
KVM: SVM: extract avic_ring_doorbell
selftests: kvm: Remove absent target file
KVM: arm64: vgic: Read HW interrupt pending state from the HW
KVM: x86/xen: Fix runstate updates to be atomic when preempting vCPU
KVM: x86: SVM: move avic definitions from AMD's spec to svm.h
KVM: x86: lapic: don't touch irr_pending in kvm_apic_update_apicv when inhibiting it
KVM: x86: nSVM: deal with L1 hypervisor that intercepts interrupts but lets L2 control them
KVM: x86: nSVM: expose clean bit support to the guest
KVM: x86: nSVM/nVMX: set nested_run_pending on VM entry which is a result of RSM
KVM: x86: nSVM: mark vmcb01 as dirty when restoring SMM saved state
KVM: x86: nSVM: fix potential NULL derefernce on nested migration
KVM: x86: SVM: don't passthrough SMAP/SMEP/PKE bits in !NPT && !gCR0.PG case
Revert "svm: Add warning message for AVIC IPI invalid target"
bpf_msg_push_data may return a non-zero value to indicate an error. The
return value should be checked to prevent undetected errors.
To indicate an error, the BPF programs now perform a different action
than their intended one to make the userspace test program notice the
error, i.e., the programs supposed to pass/redirect drop, the program
supposed to drop passes.
Fixes: 84fbfe026a ("bpf: test_sockmap add options to use msg_push_data")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/89f767bb44005d6b4dd1f42038c438f76b3ebfad.1644601294.git.fmaurer@redhat.com
Add an example of how to build C++ template-based BPF skeleton wrapper.
It's an actually runnable valid use of skeleton through more C++-like
interface. Note that skeleton destuction happens implicitly through
Skeleton<T>'s destructor.
Also make test_cpp runnable as it would have crashed on invalid btf
passed into btf_dump__new().
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220212055733.539056-3-andrii@kernel.org
Add C++-specific static methods for code-generated BPF skeleton for each
skeleton operation: open, open_opts, open_and_load, load, attach,
detach, destroy, and elf_bytes. This is to facilitate easier C++
templating on top of pure C BPF skeleton.
In C, open/load/destroy/etc "methods" are of the form
<skeleton_name>__<method>() to avoid name collision with similar
"methods" of other skeletons withint the same application. This works
well, but is very inconvenient for C++ applications that would like to
write generic (templated) wrappers around BPF skeleton to fit in with
C++ code base and take advantage of destructors and other convenient C++
constructs.
This patch makes it easier to build such generic templated wrappers by
additionally defining C++ static methods for skeleton's struct with
fixed names. This allows to refer to, say, open method as `T::open()`
instead of having to somehow generate `T__open()` function call.
Next patch adds an example template to test_cpp selftest to demonstrate
how it's possible to have all the operations wrapped in a generic
Skeleton<my_skeleton> type without explicitly passing function references.
An example of generated declaration section without %1$s placeholders:
#ifdef __cplusplus
static struct test_attach_probe *open(const struct bpf_object_open_opts *opts = nullptr);
static struct test_attach_probe *open_and_load();
static int load(struct test_attach_probe *skel);
static int attach(struct test_attach_probe *skel);
static void detach(struct test_attach_probe *skel);
static void destroy(struct test_attach_probe *skel);
static const void *elf_bytes(size_t *sz);
#endif /* __cplusplus */
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220212055733.539056-2-andrii@kernel.org
When compiling selftests in -O2 mode with GCC1, we get three new
compilations warnings about potentially uninitialized variables.
Compiler is wrong 2 out of 3 times, but this patch makes GCC11 happy
anyways, as it doesn't cost us anything and makes optimized selftests
build less annoying.
The amazing one is tc_redirect case of token that is malloc()'ed before
ASSERT_OK_PTR() check is done on it. Seems like GCC pessimistically
assumes that libbpf_get_error() will dereference the contents of the
pointer (no it won't), so the only way I found to shut GCC up was to do
zero-initializaing calloc(). This one was new to me.
For linfo case, GCC didn't realize that linfo_size will be initialized
by the function that is returning linfo_size as out parameter.
core_reloc.c case was a real bug, we can goto cleanup before initializing
obj. But we don't need to do any clean up, so just continue iteration
intstead.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220211190927.1434329-1-andrii@kernel.org
When reworking btf__get_from_id() in commit a19f93cfaf the error
handling when calling bpf_btf_get_fd_by_id() changed. Before the rework
if bpf_btf_get_fd_by_id() failed the error would not be propagated to
callers of btf__get_from_id(), after the rework it is. This lead to a
change in behavior in print_key_value() that now prints an error when
trying to lookup keys in maps with no btf available.
Fix this by following the way used in dumping maps to allow to look up
keys in no-btf maps, by which it decides whether and where to get the
btf info according to the btf value type.
Fixes: a19f93cfaf ("libbpf: Add internal helper to load BTF data by FD")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/1644249625-22479-1-git-send-email-yinjun.zhang@corigine.com
Instead of hard coding a small amount of tests, generate a wider
range of tests to try catch any corner cases that could show up.
These new tests test different MTE tag lengths and offsets, which
previously would have caused infinite loops in the kernel. This was
fixed by 295cf15623 ("arm64: Avoid premature usercopy failure"),
so these are regressions tests for that corner case.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220209152240.52788-7-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
To expand the test coverage for MTE tags in userspace memory,
also perform the test with `write`, `readv` and `writev` syscalls.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220209152240.52788-6-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The test is currently hardcoded to use the `read` syscall, this commit adds
a test_type enum to support expanding the test coverage to other syscalls.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220209152240.52788-5-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
To check there are no assumptions in the kernel about buffer sizes or alignments of
user space pointers, expand the test to cover different sizes and offsets.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220209152240.52788-4-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Future commits will have multiple iterations of tests in this function,
so make the error handling assume it will pass and then bail out if there
is an error.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220209152240.52788-3-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
These can be used to place an MTE tag at an address that is not at a
page size boundary.
The kernel prior to 295cf15623 ("arm64: Avoid premature usercopy failure"),
would infinite loop if an MTE tag was placed not at a PAGE_SIZE boundary.
This is because the kernel checked if the pages were readable by checking the
first byte of each page, but would then fault in the middle of the page due
to the MTE tag.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220209152240.52788-2-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The GCR EL1 test unconditionally includes local definitions of the prctls
it tests. Since not only will the kselftest build infrastructure ensure
that the in tree uapi headers are available but the toolchain being used to
build kselftest may ensure that system uapi headers with MTE support are
available this causes the compiler to warn about duplicate definitions.
Remove these duplicate definitions.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220126174421.1712795-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
An ARRAY_SIZE() has been added to kselftest.h so remove the local versions
in some of the arm64 selftests.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220124171748.2195875-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Commit 2c212e1bae ("KVM: s390: Return error on SIDA memop on normal
guest") fixed the behavior of the SIDA memops for normal guests. It
would be nice to have a way to test whether the current kernel has
the fix applied or not. Thus add a check to the KVM selftests for
these two memops.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220215074824.188440-1-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The ENQCMD instruction implicitly accesses the PASID_MSR to fill in the
pasid field of the descriptor being submitted to an accelerator. But
there is no precise (and stable across kernel changes) point at which
the PASID_MSR is updated from the value for one task to the next.
Kernel code that uses accelerators must always use the ENQCMDS instruction
which does not access the PASID_MSR.
Check for use of the ENQCMD instruction in the kernel and warn on its
usage.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220207230254.3342514-11-fenghua.yu@intel.com
$(or ...) is available since GNU Make 3.81, and useful to shorten the
code in some places.
Covert as follows:
$(if A,A,B) --> $(or A,B)
This patch also converts:
$(if A, A, B) --> $(or A, B)
Strictly speaking, the latter is not an equivalent conversion because
GNU Make keeps spaces after commas; if A is not empty, $(if A, A, B)
expands to " A", while $(or A, B) expands to "A".
Anyway, preceding spaces are not significant in the code hunks I touched.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Note 01.org has no TremontX directory but in mapfile.csv the family and
model:
...
GenuineIntel-6-86,V1.17,/SNR/snowridgex_core_v1.17.json,core,,,
GenuineIntel-6-86,V1.17,/SNR/snowridgex_uncore_v1.17.json,uncore,,,
...
match TremontX in the perf mapfile.csv:
...
GenuineIntel-6-86,v1,tremontx,core
...
Events are at version 1.17:
https://download.01.org/perfmon/SNR
Json files generated by the latest code at:
https://github.com/intel/event-converter-for-linux-perf
floating-point.json is added.
Tested:
Not tested on a SnowridgeX/TremontX, on a SkylakeX:
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-27-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events are still at version 2:
https://download.01.org/perfmon/WSM-EX
Json files generated by the latest code at:
https://github.com/intel/event-converter-for-linux-perf
Tested:
Not tested on a Westmere EX, on a SkylakeX:
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-26-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events are still at version 2:
https://download.01.org/perfmon/WSM-EP-SP
Json files generated by the latest code at:
https://github.com/intel/event-converter-for-linux-perf
Tested:
Not tested on a Westmere EP-SP, on a SkylakeX:
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-25-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events are updated to version 1.06:
https://download.01.org/perfmon/TGL
Json files generated by the latest code at:
https://github.com/intel/event-converter-for-linux-perf
Tested:
Not tested on a Tigerlake, on a SkylakeX:
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-24-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events are still at version 14:
https://download.01.org/perfmon/SLM
Json files generated by the latest code at:
https://github.com/intel/event-converter-for-linux-perf
The addition of a floating-point.json is due to events having
their topic better identified by the converter script.
Tested:
Not tested on a Silvermont, on a SkylakeX:
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-23-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events are still at version 16:
https://download.01.org/perfmon/SNB
Json files generated by the latest code at:
https://github.com/intel/event-converter-for-linux-perf
Tested:
Not tested on a Sandybridge, on a SkylakeX:
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-22-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on TMA_metrics-full.csv version 4.3 at 01.org:
https://download.01.org/perfmon/
Events are still version 52:
https://download.01.org/perfmon/SKL
Json files generated by the latest code at:
https://github.com/intel/event-converter-for-linux-perf
Tested:
Not tested on a Skylake, on a SkylakeX:
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-21-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events are still version 2:
https://download.01.org/perfmon/NHM-EP
Json files generated by the latest code at:
https://github.com/intel/event-converter-for-linux-perf
Tested:
Not tested on a Nehalem EP, on a SkylakeX:
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-20-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events are still at version 9:
https://download.01.org/perfmon/KNL
Json files generated by the latest code at:
https://github.com/intel/event-converter-for-linux-perf
The addition of a floating-point.json is due to events having
their topic better identified by the converter script.
Tested:
Not tested on a Knights Landing, on a SkylakeX:
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-19-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on TMA_metrics-full.csv version 4.3 at 01.org:
https://download.01.org/perfmon/
Events are still at version 20:
https://download.01.org/perfmon/JKT
Json files generated by the latest code at:
https://github.com/intel/event-converter-for-linux-perf
Tested:
Not tested on a Jaketown, on a SkylakeX:
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-18-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on TMA_metrics-full.csv version 4.3 at 01.org:
https://download.01.org/perfmon/
Events are still at version 20:
https://download.01.org/perfmon/IVT
Json files generated by the latest code at:
https://github.com/intel/event-converter-for-linux-perf
Tested:
Not tested on an Ivytown, on a SkylakeX:
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-17-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on TMA_metrics-full.csv version 4.3 at 01.org:
https://download.01.org/perfmon/
Events are updated to version 1.12:
https://download.01.org/perfmon/ICL
Json files generated by the latest code at:
https://github.com/intel/event-converter-for-linux-perf
Tested:
Not tested on an Icelake, on a SkylakeX:
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-16-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on TMA_metrics-full.csv version 4.3 at 01.org:
https://download.01.org/perfmon/
Events are updated to version 30:
https://download.01.org/perfmon/HSW
Json files generated by the latest code at:
https://github.com/intel/event-converter-for-linux-perf
Tested:
Not tested on a Haswell, on a SkylakeX:
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-15-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events are still at version 1.01:
https://download.01.org/perfmon/GLP
Json files generated by the latest code at:
https://github.com/intel/event-converter-for-linux-perf
The addition of a floating-point.json is due to events having
their topic better identified by the converter script.
Tested:
Not tested on a GoldmontPlus, on a SkylakeX:
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-14-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events are still at version 13:
https://download.01.org/perfmon/GLM
Json files generated by the latest code at:
https://github.com/intel/event-converter-for-linux-perf
The addition of a floating-point.json is due to events having
their topic better identified by the converter script.
Tested:
Not tested on a Goldmont, on a SkylakeX:
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-13-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on TMA_metrics-full.csv version 4.3 at 01.org:
https://download.01.org/perfmon/
Events are updated to version 17:
https://download.01.org/perfmon/BDX
Json files generated by the latest code at:
https://github.com/intel/event-converter-for-linux-perf
Tested:
Not tested on a BroadwellX, on a SkylakeX:
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-12-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on TMA_metrics-full.csv version 4.3 at 01.org:
https://download.01.org/perfmon/
Events are updated to version 26:
https://download.01.org/perfmon/BDW
Json files generated by the latest code at:
https://github.com/intel/event-converter-for-linux-perf
Tested:
Not tested on a Broadwell, on a SkylakeX:
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-11-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events are still at version 4:
https://download.01.org/perfmon/BNL
Json files generated by the latest code at:
https://github.com/intel/event-converter-for-linux-perf
Tested:
Not tested on a Bonnell, on a SkylakeX:
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-10-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on TMA_metrics-full.csv version 4.3 at 01.org:
https://download.01.org/perfmon/
Events are updated to version 1.11:
https://download.01.org/perfmon/ICX
Json files generated by:
https://github.com/intel/event-converter-for-linux-perf
Tested:
...
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
68: Parse and process metrics : Ok
...
88: perf stat metrics (shadow stat) test : Ok
89: perf all metricgroups test : Ok
90: perf all metrics test : FAILED!
91: perf all PMU test : Ok
...
Test 90 failed due to MEM_PMM_Read_Latency as the test machine
lacks optane memory, and the divide by 0 causes the metric not to
print - which is intended behavior.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events are still at version 2:
https://download.01.org/perfmon/WSM-EP-DP
Json files generated by the latest code at:
https://github.com/intel/event-converter-for-linux-perf
Tested:
...
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
68: Parse and process metrics : Ok
...
88: perf stat metrics (shadow stat) test : Ok
89: perf all metricgroups test : Ok
90: perf all metrics test : Ok
91: perf all PMU test : Ok
...
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on TMA_metrics-full.csv version 4.3 at 01.org:
https://download.01.org/perfmon/
Events are still at version 21:
https://download.01.org/perfmon/IVB
Json files generated by:
https://github.com/intel/event-converter-for-linux-perf
Tested:
...
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
68: Parse and process metrics : Ok
...
88: perf stat metrics (shadow stat) test : Ok
89: perf all metricgroups test : Ok
90: perf all metrics test : FAILED!
91: perf all PMU test : Ok
...
Test 90 failed for Load_Miss_Real_Latency with <not counted> events:
Performance counter stats for 'perf bench internals synthesize':
<not counted> mem_load_uops_retired.hit_lfb (0.00%)
<not counted> MEM_LOAD_UOPS_RETIRED.L1_MISS (0.00%)
<not counted> L1D_PEND_MISS.PENDING (0.00%)
558185217 ns duration_time
This is exposing a somewhat known issue with weak groups that can
be worked around with:
$ perf stat --metric-no-group -M Load_Miss_Real_Latency -a sleep 1
Performance counter stats for 'system wide':
14935022 mem_load_uops_retired.hit_lfb # 23.55 Load_Miss_Real_Latency (83.23%)
4716714 MEM_LOAD_UOPS_RETIRED.L1_MISS (66.68%)
462705675 L1D_PEND_MISS.PENDING (83.22%)
1001548340 ns duration_time
1.001548340 seconds time elapsed
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on TMA_metrics-full.csv version 4.3 at 01.org:
https://download.01.org/perfmon/
Events are updated to version 22:
https://download.01.org/perfmon/HSX
Json files generated by:
https://github.com/intel/event-converter-for-linux-perf
Tested:
...
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
68: Parse and process metrics : Ok
...
88: perf stat metrics (shadow stat) test : Ok
89: perf all metricgroups test : Ok
90: perf all metrics test : FAILED!
91: perf all PMU test : Ok
...
Test 90 failed for Load_Miss_Real_Latency with <not counted> events:
Performance counter stats for 'system wide':
<not counted> mem_load_uops_retired.hit_lfb (0.00%)
<not counted> MEM_LOAD_UOPS_RETIRED.L1_MISS (0.00%)
<not counted> L1D_PEND_MISS.PENDING (0.00%)
1002638743 ns duration_time
This is exposing a somewhat known issue with weak groups that can
be worked around with:
$ perf stat --metric-no-group -M Load_Miss_Real_Latency -a sleep 1
Performance counter stats for 'system wide':
9539883 mem_load_uops_retired.hit_lfb # 25.87 Load_Miss_Real_Latency (83.24%)
10876212 MEM_LOAD_UOPS_RETIRED.L1_MISS (66.68%)
528172960 L1D_PEND_MISS.PENDING (83.26%)
1001964165 ns duration_time
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on TMA_metrics-full.csv version 4.3 at 01.org:
https://download.01.org/perfmon/
Events are updated to version 1.14:
https://download.01.org/perfmon/CLX
Json files generated by:
https://github.com/intel/event-converter-for-linux-perf
Tested:
...
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
68: Parse and process metrics : Ok
...
88: perf stat metrics (shadow stat) test : Ok
89: perf all metricgroups test : Ok
90: perf all metrics test : FAILED!
91: perf all PMU test : Ok
...
Test 90 failed due to MEM_PMM_Read_Latency as the test machine lacks
optane memory, and the divide by 0 causes the metric not to print -
which is intended behavior.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on TMA_metrics-full.csv version 4.3 at 01.org:
https://download.01.org/perfmon/
Events are still at version 7:
https://download.01.org/perfmon/BDW-DE
Json files generated by:
https://github.com/intel/event-converter-for-linux-perf
This adds TopdownL1_SMT metrics to bdwde-metrics.json. A discussed in:
https://lore.kernel.org/all/20220129080929.837293-4-irogers@google.com/
The TMA_Metrics-full.csv was modified so that BDW-DE is in the server
column with BDX, the Page_Walks_Utilization and
Page_Walks_Utilization_SMT metrics are then copied from BDW.
Tested:
...
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
68: Parse and process metrics : Ok
...
88: perf stat metrics (shadow stat) test : Ok
89: perf all metricgroups test : Ok
90: perf all metrics test : Skip
91: perf all PMU test : Ok
...
90 skips due to a lack of floating point samples, which is
understandable.
Suggested-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on TMA_metrics-full.csv version 4.3 at 01.org:
https://download.01.org/perfmon/
Events are updated to version 1.26:
https://download.01.org/perfmon/SKX
Json files generated by:
https://github.com/intel/event-converter-for-linux-perf
Fixes were made that allow the skx-metrics.json to successfully
generate, bringing back TopdownL1 metrics.
Tested:
$ perf test
...
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
...
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
...
68: Parse and process metrics : Ok
...
88: perf stat metrics (shadow stat) test : Ok
89: perf all metricgroups test : Ok
90: perf all metrics test : Skip
91: perf all PMU test : Ok
...
90 skips due to a lack of floating point samples, which is
understandable.
Fixes: c4ad8fabd0 ("perf vendor events: Update metrics for SkyLake Server")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some Intel TMA metrics compute a ratio that may divide by 0, which
causes the metric not to print. This happens for metrics with FP_ARITH
events. If we see these events in the result and would otherwise fail,
then switch to a skip.
Also, don't early exit when processing metrics.
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The PREEMPT_RT patchset does not use do_softirq() function thus trying
to filter for do_softirq fails for such kernel:
echo do_softirq
ftracetest: 81: echo: echo: I/O error
Choose some other visible function for the test. The function does not
have to be actually executed during the test, because it is only testing
filter API interface.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Now unmap_ip is const, make contains symbol const.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220211103415.2737789-11-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The maps code has its own header, move the corresponding C function
definitions to their own C file. In the process tidy and minimize
includes.
Committer notes:
Add back the 'static' for maps__init() and maps__exit().
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220211103415.2737789-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now purely accessed through new and delete, so reduce to file scope.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220211103415.2737789-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
struct maps is reference counted, using a pointer is more idiomatic.
Committer notes:
Check maps__new() return.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220211103415.2737789-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
struct maps is reference counted, using a pointer is more idiomatic.
Committer notes:
Delay:
maps = machine__kernel_maps(&vmlinux);
To after:
machine__init(&vmlinux, "", HOST_KERNEL_ID);
To avoid this on f34:
In file included from /var/home/acme/git/perf/tools/perf/util/build-id.h:10,
from /var/home/acme/git/perf/tools/perf/util/dso.h:13,
from tests/vmlinux-kallsyms.c:8:
In function ‘machine__kernel_maps’,
inlined from ‘test__vmlinux_matches_kallsyms’ at tests/vmlinux-kallsyms.c:122:22:
/var/home/acme/git/perf/tools/perf/util/machine.h:86:23: error: ‘vmlinux.kmaps’ is used uninitialized [-Werror=uninitialized]
86 | return machine->kmaps;
| ~~~~~~~^~~~~~~
tests/vmlinux-kallsyms.c: In function ‘test__vmlinux_matches_kallsyms’:
tests/vmlinux-kallsyms.c:121:34: note: ‘vmlinux’ declared here
121 | struct machine kallsyms, vmlinux;
| ^~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220211103415.2737789-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Libbpf has deprecated the ability to keep track of object list inside
libbpf, it now requires applications to track usage multiple bpf objects
directly. Remove usage of bpf_object__next() API and hoist the tracking
logic to perf.
Signed-off-by: Christy Lee <christylee@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: bpf@vger.kernel.org
Cc: kernel-team@fb.com
Link: https://lore.kernel.org/bpf/20220212073054.1052880-3-andrii@kernel.org
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf_load_program() API is deprecated, remove perf's usage of the
deprecated function. Add a __weak function declaration for libbpf
version compatibility.
Signed-off-by: Christy Lee <christylee@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: bpf@vger.kernel.org
Cc: kernel-team@fb.com
Link: https://lore.kernel.org/bpf/20220212073054.1052880-2-andrii@kernel.org
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
seccomp_bpf failed on tests 47 global.user_notification_filter_empty
and 48 global.user_notification_filter_empty_threaded when it's
tested on updated kernel but with old kernel headers. Because old
kernel headers don't have definition of macro __NR_clone3 which is
required for these two tests. Since under selftests/, we can install
headers once for all tests (the default INSTALL_HDR_PATH is
usr/include), fix it by adding usr/include to the list of directories
to be searched. Use "-isystem" to indicate it's a system directory as
the real kernel headers directories are.
Signed-off-by: Sherry Yang <sherry.yang@oracle.com>
Tested-by: Sherry Yang <sherry.yang@oracle.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Test the emulation of TEST PROTECTION in the presence of storage keys.
Emulation only occurs under certain conditions, one of which is the host
page being protected.
Trigger this by protecting the test pages via mprotect.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220211182215.2730017-5-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
in current Linux, MTU policing does not take into account that packets at
the TC ingress have the L2 header pulled. Thus, the same TC police action
(with the same value of tcfp_mtu) behaves differently for ingress/egress.
In addition, the full GSO size is compared to tcfp_mtu: as a consequence,
the policer drops GSO packets even when individual segments have the L2 +
L3 + L4 + payload length below the configured valued of tcfp_mtu.
Improve the accuracy of MTU policing as follows:
- account for mac_len for non-GSO packets at TC ingress.
- compare MTU threshold with the segmented size for GSO packets.
Also, add a kselftest that verifies the correct behavior.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmIJZmoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGZdoH/04d8zUhM3Fd3ACB
V/ONtOXmkfP2mEJSjb7cXTN1EM2SlOBdSnSsEw09FtGhjHABjOnLho4J5ixk9TH8
zNMNI3EMksM2T9KadHwxv8Vvp1LTrWRzMbws8tOCPA0RkOpikJfClC8CzRAyidJ3
cAbbDH/Jl1GnVZ8bpKmv2auYt+kNVGb0cwJ2W8phCwwkL7sLky5tgYeaGiJEXbJf
Tfi/3qtFdmYjD8wtYnCfzjnB7suG5nF7rGEnxCIxNi+IA4DieUv2c1KchuoaBfT9
df364VjKaGT3j+GB07ksQ/8mkwWiRXsCzOXAyMZSZaWjdMD4aAhCTJak5j7/TvGC
wtgHPww=
=/CMW
-----END PGP SIGNATURE-----
Merge 5.17-rc4 into char-misc-next
We need the char/misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When receiving netlink messages, libbpf was using a statically allocated
stack buffer of 4k bytes. This happened to work fine on systems with a 4k
page size, but on systems with larger page sizes it can lead to truncated
messages. The user-visible impact of this was that libbpf would insist no
XDP program was attached to some interfaces because that bit of the netlink
message got chopped off.
Fix this by switching to a dynamically allocated buffer; we borrow the
approach from iproute2 of using recvmsg() with MSG_PEEK|MSG_TRUNC to get
the actual size of the pending message before receiving it, adjusting the
buffer as necessary. While we're at it, also add retries on interrupted
system calls around the recvmsg() call.
v2:
- Move peek logic to libbpf_netlink_recv(), don't double free on ENOMEM.
Fixes: 8bbb77b7c7 ("libbpf: Add various netlink helpers")
Reported-by: Zhiqian Guan <zhguan@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20220211234819.612288-1-toke@redhat.com
While debugging an issue, we wanted to check whether the arch specific
kernel memmove implementation is correct.
This selftest could help test that.
Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Suggested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/57242c1fe7aba6b7f0fcd0490303bfd5f222ee00.1631512686.git.riteshh@linux.ibm.com
Just before the 2.35 release of glibc, the __rseq_offset userspace ABI
was changed from int to ptrdiff_t.
Adapt to this change in the kernel selftests.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://sourceware.org/pipermail/libc-alpha/2022-February/136024.html
The TH_LOG() macro is an optional debug logging function made
available by kselftest itself. When TH_LOG_ENABLED is set it
prints the provided message with additional information and
formatting that already includes a newline.
Providing a newline to the message printed by TH_LOG() results
in a double newline that produces irregular test output.
Remove the unnecessary newlines from the text provided to
TH_LOG().
Fixes: 1b35eb7195 ("selftests/sgx: Encpsulate the test enclave creation")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lkml.kernel.org/r/6fd171ba622aed172a7c5b129d34d50bd0482f24.1644355600.git.reinette.chatre@intel.com
In support of debugging the SGX tests print details from
the enclave and its memory mappings if any failure is encountered
during enclave loading.
When a failure is encountered no data is printed because the
printing of the data is preceded by cleanup of the data.
Move the data cleanup after the data print.
Fixes: 1471721489 ("selftests/sgx: Dump segments and /proc/self/maps only on failure")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lkml.kernel.org/r/dab672f771e9b99e50c17ae2a75dc0b020cb0ce9.1644355600.git.reinette.chatre@intel.com
It is not possible to build an enclave if it was not possible to load
the binary from which it should be constructed. Do not attempt
to make further progress but instead return with failure. A
"return false" from setup_test_encl() is expected to trip an
ASSERT_TRUE() and abort the rest of the test.
Fixes: 1b35eb7195 ("selftests/sgx: Encpsulate the test enclave creation")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lkml.kernel.org/r/e3778c77f95e6dca348c732b12f155051d2899b4.1644355600.git.reinette.chatre@intel.com
== Background ==
The SGX selftests track parts of the enclave binaries in an array:
encl->segment_tbl[]. That array is dynamically allocated early
(but not first) in the test's lifetime. The array is referenced
at the end of the test in encl_delete().
== Problem ==
encl->segment_tbl[] can be NULL if the test fails before its
allocation. That leads to a NULL-pointer-dereference in encl_delete().
This is triggered during early failures of the selftest like if the
enclave binary ("test_encl.elf") is deleted.
== Solution ==
Ensure encl->segment_tbl[] is valid before attempting to access
its members. The offset with which it is accessed, encl->nr_segments,
is initialized before encl->segment_tbl[] and thus considered valid
to use after the encl->segment_tbl[] check succeeds.
Fixes: 3200505d4d ("selftests/sgx: Create a heap for the test enclave")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lkml.kernel.org/r/90a31dfd640ea756fa324712e7cbab4a90fa7518.1644355600.git.reinette.chatre@intel.com
Add a test that validates that timer value is not overwritten when doing
a copy_map_value call in the kernel. Without the prior fix, this test
triggers a crash.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220209070324.1093182-3-memxor@gmail.com
- Fixes to the RTLA tooling.
- A fix to a tp_printk overriding tp_printk_stop_on_boot on command line.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYgWtxxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsaaAQD+4lcpIRKdkfGb09xMlh8Gr8OvRoVb
5XAhzHVpETjGUAEAyIJAG+7Epw/St8FCSupNAEWTzGghjhoJhFblTd17jAg=
=CCON
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fixes to the RTLA tooling
- A fix to a tp_printk overriding tp_printk_stop_on_boot on the
command line
* tag 'trace-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix tp_printk option related with tp_printk_stop_on_boot
MAINTAINERS: Add RTLA entry
rtla: Fix segmentation fault when failing to enable -t
rtla/trace: Error message fixup
rtla/utils: Fix session duration parsing
rtla: Follow kernel version
There is no vmx_pi_mmio_test file. Remove it to get rid of error while
creation of selftest archive:
rsync: [sender] link_stat "/kselftest/kvm/x86_64/vmx_pi_mmio_test" failed: No such file or directory (2)
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1333) [sender=3.2.3]
Fixes: 6a58150859 ("selftest: KVM: Add intra host migration tests")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Message-Id: <20220210172352.1317554-1-usama.anjum@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Having functions to access nsinfo reduces the places where reference
counting checking needs to be added.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220211103415.2737789-14-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Functions purely determine a value from the map and don't need to modify
it. Move functions to C file as they are most commonly used via a
function pointer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220211103415.2737789-10-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
non-regular file needs to be compiled and then copied to the output
directory. Remove it from TEST_PROGS and add it to TEST_GEN_PROGS. This
removes error thrown by rsync when non-regular object isn't found:
rsync: [sender] link_stat "/linux/tools/testing/selftests/exec/non-regular" failed: No such file or directory (2)
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1333) [sender=3.2.3]
Fixes: 0f71241a8e ("selftests/exec: add file type errno tests")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Improve readability in perf_pmu__cpus_match() by using
perf_cpu_map__for_each_cpu().
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220211103415.2737789-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch from directly accessing the perf_cpu_map to using the appropriate
libperf API when possible. Using the API simplifies the job of
refactoring use of perf_cpu_map.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220211103415.2737789-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Add selftest for nft_synproxy, from Florian Westphal.
2) xt_socket destroy path incorrectly disables IPv4 defrag for
IPv6 traffic (typo), from Eric Dumazet.
3) Fix exit value selftest nft_concat_range.sh, from Hangbin Liu.
4) nft_synproxy disables the IPv4 hooks if the IPv6 hooks fail
to be registered.
5) disable rp_filter on router in selftest nft_fib.sh, also
from Hangbin Liu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The ->rtm_tos option is normally used to route packets based on both
the destination address and the DS field. However it's ignored for
IPv6 routes. Setting ->rtm_tos for IPv6 is thus invalid as the route
is going to work only on the destination address anyway, so it won't
behave as specified.
Suggested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test treated zero as a successful run when it really should treat
non-zero as a successful run. A mount's idmapping can't change once it
has been attached to the filesystem.
Link: https://lore.kernel.org/r/20220203131411.3093040-2-brauner@kernel.org
Fixes: 01eadc8dd9 ("tests: add mount_setattr() selftests")
Cc: Seth Forshee <seth.forshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Since the notion of versions was introduced for bpftool, it has been
following the version number of the kernel (using the version number
corresponding to the tree in which bpftool's sources are located). The
rationale was that bpftool's features are loosely tied to BPF features
in the kernel, and that we could defer versioning to the kernel
repository itself.
But this versioning scheme is confusing today, because a bpftool binary
should be able to work with both older and newer kernels, even if some
of its recent features won't be available on older systems. Furthermore,
if bpftool is ported to other systems in the future, keeping a
Linux-based version number is not a good option.
Looking at other options, we could either have a totally independent
scheme for bpftool, or we could align it on libbpf's version number
(with an offset on the major version number, to avoid going backwards).
The latter comes with a few drawbacks:
- We may want bpftool releases in-between two libbpf versions. We can
always append pre-release numbers to distinguish versions, although
those won't look as "official" as something with a proper release
number. But at the same time, having bpftool with version numbers that
look "official" hasn't really been an issue so far.
- If no new feature lands in bpftool for some time, we may move from
e.g. 6.7.0 to 6.8.0 when libbpf levels up and have two different
versions which are in fact the same.
- Following libbpf's versioning scheme sounds better than kernel's, but
ultimately it doesn't make too much sense either, because even though
bpftool uses the lib a lot, its behaviour is not that much conditioned
by the internal evolution of the library (or by new APIs that it may
not use).
Having an independent versioning scheme solves the above, but at the
cost of heavier maintenance. Developers will likely forget to increase
the numbers when adding features or bug fixes, and we would take the
risk of having to send occasional "catch-up" patches just to update the
version number.
Based on these considerations, this patch aligns bpftool's version
number on libbpf's. This is not a perfect solution, but 1) it's
certainly an improvement over the current scheme, 2) the issues raised
above are all minor at the moment, and 3) we can still move to an
independent scheme in the future if we realise we need it.
Given that libbpf is currently at version 0.7.0, and bpftool, before
this patch, was at 5.16, we use an offset of 6 for the major version,
bumping bpftool to 6.7.0. Libbpf does not export its patch number;
leave bpftool's patch number at 0 for now.
It remains possible to manually override the version number by setting
BPFTOOL_VERSION when calling make.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220210104237.11649-3-quentin@isovalent.com
To help users check what version of libbpf is being used with bpftool,
print the number along with bpftool's own version number.
Output:
$ ./bpftool version
./bpftool v5.16.0
using libbpf v0.7
features: libbfd, libbpf_strict, skeletons
$ ./bpftool version --json --pretty
{
"version": "5.16.0",
"libbpf_version": "0.7",
"features": {
"libbfd": true,
"libbpf_strict": true,
"skeletons": true
}
}
Note that libbpf does not expose its patch number.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220210104237.11649-2-quentin@isovalent.com
Tests to ensure validator boundary cases are working correctly within
close and far bounds. Ensures __data_loc and __rel_loc strings are
null terminated and within range. Ensures min size checks work as
expected.
Link: https://lkml.kernel.org/r/20220118204326.2169-11-beaub@linux.microsoft.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tests perf can be attached to and written out correctly. Ensures attach
updates status bits in user programs.
Link: https://lkml.kernel.org/r/20220118204326.2169-10-beaub@linux.microsoft.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tests matching deletes, creation of basic and complex types. Ensures
common patterns work correctly when interacting with dynamic_events
file.
Link: https://lkml.kernel.org/r/20220118204326.2169-9-beaub@linux.microsoft.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tests basic functionality of registering/deregistering, status and
writing data out via ftrace mechanisms within user_events.
Link: https://lkml.kernel.org/r/20220118204326.2169-8-beaub@linux.microsoft.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Current release - new code bugs:
- sparx5: fix get_stat64 out-of-bound access and crash
- smc: fix netdev ref tracker misuse
Previous releases - regressions:
- eth: ixgbevf: require large buffers for build_skb on 82599VF,
avoid overflows
- eth: ocelot: fix all IP traffic getting trapped to CPU with PTP
over IP
- bonding: fix rare link activation misses in 802.3ad mode
Previous releases - always broken:
- tcp: fix tcp sock mem accounting in zero-copy corner cases
- remove the cached dst when uncloning an skb dst and its metadata,
since we only have one ref it'd lead to an UaF
- netfilter:
- conntrack: don't refresh sctp entries in closed state
- conntrack: re-init state for retransmitted syn-ack, avoid
connection establishment getting stuck with strange stacks
- ctnetlink: disable helper autoassign, avoid it getting lost
- nft_payload: don't allow transport header access for fragments
- dsa: fix use of devres for mdio throughout drivers
- eth: amd-xgbe: disable interrupts during pci removal
- eth: dpaa2-eth: unregister netdev before disconnecting the PHY
- eth: ice: fix IPIP and SIT TSO offload
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=jlhJ
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and can.
Current release - new code bugs:
- sparx5: fix get_stat64 out-of-bound access and crash
- smc: fix netdev ref tracker misuse
Previous releases - regressions:
- eth: ixgbevf: require large buffers for build_skb on 82599VF, avoid
overflows
- eth: ocelot: fix all IP traffic getting trapped to CPU with PTP
over IP
- bonding: fix rare link activation misses in 802.3ad mode
Previous releases - always broken:
- tcp: fix tcp sock mem accounting in zero-copy corner cases
- remove the cached dst when uncloning an skb dst and its metadata,
since we only have one ref it'd lead to an UaF
- netfilter:
- conntrack: don't refresh sctp entries in closed state
- conntrack: re-init state for retransmitted syn-ack, avoid
connection establishment getting stuck with strange stacks
- ctnetlink: disable helper autoassign, avoid it getting lost
- nft_payload: don't allow transport header access for fragments
- dsa: fix use of devres for mdio throughout drivers
- eth: amd-xgbe: disable interrupts during pci removal
- eth: dpaa2-eth: unregister netdev before disconnecting the PHY
- eth: ice: fix IPIP and SIT TSO offload"
* tag 'net-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: dsa: mv88e6xxx: fix use-after-free in mv88e6xxx_mdios_unregister
net: mscc: ocelot: fix mutex lock error during ethtool stats read
ice: Avoid RTNL lock when re-creating auxiliary device
ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler
ice: fix IPIP and SIT TSO offload
ice: fix an error code in ice_cfg_phy_fec()
net: mpls: Fix GCC 12 warning
dpaa2-eth: unregister the netdev before disconnecting from the PHY
skbuff: cleanup double word in comment
net: macb: Align the dma and coherent dma masks
mptcp: netlink: process IPv6 addrs in creating listening sockets
selftests: mptcp: add missing join check
net: usb: qmi_wwan: Add support for Dell DW5829e
vlan: move dev_put into vlan_dev_uninit
vlan: introduce vlan_dev_free_egress_priority
ax25: fix UAF bugs of net_device caused by rebinding operation
net: dsa: fix panic when DSA master device unbinds on shutdown
net: amd-xgbe: disable interrupts during pci removal
tipc: rate limit warning for received illegal binding update
net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE
...
This Kselftest fixes updated for Linux 5.17-rc4 consists of build and
run-time fixes to pidfd, clone3, and ir tests.
-----BEGIN PGP SIGNATURE-----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=UT3I
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Build and run-time fixes to pidfd, clone3, and ir tests"
* tag 'linux-kselftest-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ir: fix build with ancient kernel headers
selftests: fixup build warnings in pidfd / clone3 tests
pidfd: fix test failure due to stack overflow on some arches
This KUnit fixes update for Linux 5.17-rc4 consists of bug fixes
to the test and usage documentation.
-----BEGIN PGP SIGNATURE-----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=EqMn
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Fixes to the test and usage documentation"
* tag 'linux-kselftest-kunit-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: KUnit: Fix usage bug
kunit: fix missing f in f-string in run_checks.py
Some distros may enable rp_filter by default. After ns1 change addr to
10.0.2.99 and set default router to 10.0.2.1, while the connected router
address is still 10.0.1.1. The router will not reply the arp request
from ns1. Fix it by setting the router's veth0 rp_filter to 0.
Before the fix:
# ./nft_fib.sh
PASS: fib expression did not cause unwanted packet drops
Netns nsrouter-HQkDORO2 fib counter doesn't match expected packet count of 1 for 1.1.1.1
table inet filter {
chain prerouting {
type filter hook prerouting priority filter; policy accept;
ip daddr 1.1.1.1 fib saddr . iif oif missing counter packets 0 bytes 0 drop
ip6 daddr 1c3::c01d fib saddr . iif oif missing counter packets 0 bytes 0 drop
}
}
After the fix:
# ./nft_fib.sh
PASS: fib expression did not cause unwanted packet drops
PASS: fib expression did drop packets for 1.1.1.1
PASS: fib expression did drop packets for 1c3::c01d
Fixes: 8294442124 ("selftests: netfilter: add fib test case")
Signed-off-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Generealize light skeleton by hiding mmap details in skel_internal.h
In this form generated lskel.h is usable both by user space and by the kernel.
Note that previously #include <bpf/bpf.h> was in *.lskel.h file.
To avoid #ifdef-s in a generated lskel.h the include of bpf.h is moved
to skel_internal.h, but skel_internal.h is also used by gen_loader.c
which is part of libbpf. Therefore skel_internal.h does #include "bpf.h"
in case of user space, so gen_loader.c and lskel.h have necessary definitions.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209232001.27490-4-alexei.starovoitov@gmail.com
Prepare light skeleton to be used in the kernel module and in the user space.
The look and feel of lskel.h is mostly the same with the difference that for
user space the skel->rodata is the same pointer before and after skel_load
operation, while in the kernel the skel->rodata after skel_open and the
skel->rodata after skel_load are different pointers.
Typical usage of skeleton remains the same for kernel and user space:
skel = my_bpf__open();
skel->rodata->my_global_var = init_val;
err = my_bpf__load(skel);
err = my_bpf__attach(skel);
// access skel->rodata->my_global_var;
// access skel->bss->another_var;
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209232001.27490-3-alexei.starovoitov@gmail.com
Load data directory files and provide basic raw dump and aggregated
analysis support of data directories in report mode, still with no
memory consumption optimizations.
READER_MAX_SIZE is chosen based on the results of measurements on
different machines on perf.data directory sizes >1GB. On machines
with big core count (192 cores) the difference between 1MB and 2MB
is about 4%. Other sizes (>2MB) are quite equal to 2MB.
On machines with small core count (4-24) there is no differences
between 1-16 MB sizes. So this constant is 2MB.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/3f10c13a226c0ceb53e88a082f847b91c1ae2c25.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement compatibility checks for other modes and related command line
options: asynchronous (--aio) trace streaming and affinity (--affinity)
modes, pipe mode, AUX area tracing --snapshot and --aux-sample options,
--switch-output, --switch-output-event, --switch-max-files and
--timestamp-filename options. Parallel data streaming is compatible with
Zstd compression (--compression-level) and external control commands
(--control). CPU mask provided via -C option filters --threads
specification masks.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/fadc1cf74057af4d5766248fcfe5cdde40732aa9.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend --threads option in perf record command line interface.
The option can have a value in the form of masks that specify
CPUs to be monitored with data streaming threads and its layout
in system topology. The masks can be filtered using CPU mask
provided via -C option.
The specification value can be user defined list of masks. Masks
separated by colon define CPUs to be monitored by one thread and
affinity mask of that thread is separated by slash. For example:
<cpus mask 1>/<affinity mask 1>:<cpu mask 2>/<affinity mask 2>
specifies parallel threads layout that consists of two threads
with corresponding assigned CPUs to be monitored.
The specification value can be a string e.g. "cpu", "core" or
"package" meaning creation of data streaming thread for every
CPU or core or package to monitor distinct CPUs or CPUs grouped
by core or package.
The option provided with no or empty value defaults to per-cpu
parallel threads layout creating data streaming thread for every
CPU being monitored.
Document --threads option syntax and parallel data streaming modes
in Documentation/perf-record.txt.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/079e2619be70c465317cf7c9fdaf5fa069728c32.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Provide --threads option in perf record command line interface.
The option creates a data streaming thread for each CPU in the system.
Document --threads option in Documentation/perf-record.txt.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/01aeae43b047f428596c4ef9f9342ab94865cedd.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce bytes_transferred and bytes_compressed stats so they
would capture statistics for the related data buffer transfers.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/b5d598034c507dfb7544d2125500280b7d434764.1642440724.git.alexey.v.bayduraev@linux.intel.com
[ Use PRiu64 to print u64 values, fixing the build on 32-bit architectures ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce compressor object into mmap object so it could be used to
pack the data stream from the corresponding kernel data buffer.
Initialize and make use of the introduced per mmap compressor.
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Link: https://lore.kernel.org/r/80edc286cf6543139a7d5a91217605123aa0b50d.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a function to calculate the total amount of data written
and use it to support the --max-size option.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/3e2c69186641446f8ab003ec209bccc762b3394d.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce data file objects into mmap object so it could be used to
process and store data stream from the corresponding kernel data buffer.
Initialize data files located at mmap buffer objects so trace data
can be written into several data file located at data directory.
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Link: https://lore.kernel.org/r/177077f7734b63e5c999ccd75ac6dc3c694f0d0d.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Start thread in detached state because its management is implemented
via messaging to avoid any scaling issues. Block signals prior thread
start so only main tool thread would be notified on external async
signals during data collection. Thread affinity mask is used to assign
eligible CPUs for the thread to run. Wait and sync on thread start using
thread ack pipe.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/95784dd9f7c81ee408eab27b50b4c09ad4cf7be6.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signal thread to terminate by closing write fd of msg pipe.
Receive THREAD_MSG__READY message as the confirmation of the
thread's termination. Stop threads created for parallel trace
streaming prior their stats processing.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/55ef8cc5ec3a96360660d9dc1763573225325f8c.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce thread local variable and use it for threaded trace streaming.
Use thread affinity mask instead of record affinity mask in affinity
modes. Use evlist__ctlfd_update() to propagate control commands from
thread object to global evlist object to enable evlist__ctlfd_*
functionality. Move waking and sample statistic to struct record_thread
and introduce record__waking function to calculate the total number of
wakes.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/0d127555219991c1dcd6c6bb76b24fa6b78d2932.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce thread specific data object and array of such objects
to store and manage thread local data. Implement functions to
allocate, initialize, finalize and release thread specific data.
Thread local maps and overwrite_maps arrays keep pointers to
mmap buffer objects to serve according to maps thread mask.
Thread local pollfd array keeps event fds connected to mmaps
buffers according to maps thread mask.
Thread control commands are delivered via thread local comm pipes
and ctlfd_pos fd. External control commands (--control option)
are delivered via evlist ctlfd_pos fd and handled by the main
tool thread.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/fc9f74af6f822d9c0fa0e145c3564a760dbe3d4b.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a function to duplicate an existing file descriptor in
the fdarray structure. The function returns the position of the duplicated
file descriptor.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/2891f1def287d5863cc82683a4d5879195c8d90c.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce affinity and mmap thread masks. Thread affinity mask
defines CPUs that a thread is allowed to run on. Thread maps
mask defines mmap data buffers the thread serves to stream
profiling data from.
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/9042bf7daf988e17e17e6acbf5d29590bde869cd.1642440724.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a new test for Hyper-V nSVM extensions (Hyper-V on KVM) and add
a test for enlightened MSR-Bitmap feature:
- Intercept access to MSR_FS_BASE in L1 and check that this works
with enlightened MSR-Bitmap disabled.
- Enabled enlightened MSR-Bitmap and check that the intercept still works
as expected.
- Intercept access to MSR_GS_BASE but don't clear the corresponding bit
from clean fields mask, KVM is supposed to skip updating MSR-Bitmap02 and
thus the consequent access to the MSR from L2 will not get intercepted.
- Finally, clear the corresponding bit from clean fields mask and check
that access to MSR_GS_BASE is now intercepted.
The test works with the assumption, that access to MSR_FS_BASE/MSR_GS_BASE
is not intercepted for L1. If this ever becomes not true the test will
fail as nested_svm_exit_handled_msr() always checks L1's MSR-Bitmap for
L2 irrespective of clean fields. The behavior is correct as enlightened
MSR-Bitmap feature is just an optimization, KVM is not obliged to ignore
updates when the corresponding bit in clean fields stays clear.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's a copy of 'struct vmcb_control_area' definition in KVM selftests,
update it to allow testing of the newly introduced features.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to VMX, allocate memory for MSR-Bitmap and fill in 'msrpm_base_pa'
in VMCB. To use it, tests will need to set INTERCEPT_MSR_PROT interception
along with the required bits in the MSR-Bitmap.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a test for enlightened MSR-Bitmap feature (Hyper-V on KVM):
- Intercept access to MSR_FS_BASE in L1 and check that this works
with enlightened MSR-Bitmap disabled.
- Enabled enlightened MSR-Bitmap and check that the intercept still works
as expected.
- Intercept access to MSR_GS_BASE but don't clear the corresponding bit
from 'hv_clean_fields', KVM is supposed to skip updating MSR-Bitmap02 and
thus the consequent access to the MSR from L2 will not get intercepted.
- Finally, clear the corresponding bit from 'hv_clean_fields' and check
that access to MSR_GS_BASE is now intercepted.
The test works with the assumption, that access to MSR_FS_BASE/MSR_GS_BASE
is not intercepted for L1. If this ever becomes not true the test will
fail as nested_vmx_exit_handled_msr() always checks L1's MSR-Bitmap for
L2 irrespective of 'hv_clean_fields'. The behavior is correct as
enlightened MSR-Bitmap feature is just an optimization, KVM is not obliged
to ignore updates when the corresponding bit in 'hv_clean_fields' stays
clear.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of just resetting 'hv_clean_fields' to 0 on every enlightened
vmresume, do the expected cleaning of the corresponding bit on enlightened
vmwrite. Avoid direct access to 'current_evmcs' from evmcs_test to support
the change.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID 0x40000000.EAX is now always present as it has Enlightened
MSR-Bitmap feature bit set. Adapt the test accordingly. Opportunistically
add a check for the supported eVMCS version range.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220203104620.277031-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an option to dirty_log_perf_test.c to disable
KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE and KVM_DIRTY_LOG_INITIALLY_SET so
the legacy dirty logging code path can be tested.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220119230739.2234394-19-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stats from discarded entries should be omitted.
But a lock class may have both good and bad entries.
If the first entry was bad, we can zero-fill the stats and only add good
stats if any.
The entry can remove the discard state if it finds a good entry later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220127000050.3011493-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of the random order, sort it by lock class name.
Before:
# perf lock info -m
Address of instance: name of class
0xffffa0d940ac5310: &dentry->d_lockref.lock
0xffffa0c20b0e1cb0: &dentry->d_lockref.lock
0xffffa0d8e051cc48: &base->lock
0xffffa0d94f992110: &anon_vma->rwsem
0xffffa0d947a4f278: (null)
0xffffa0c208f6e108: &map->lock
0xffffa0c213ad32c8: &cfs_rq->removed.lock
0xffffa0c20d695888: &parent->list_lock
0xffffa0c278775278: (null)
0xffffa0c212ad4690: &dentry->d_lockref.lock
After:
# perf lock info -m
Address of instance: name of class
0xffffa0c20d538800: &(&sig->stats_lock)->lock
0xffffa0c216d4ec40: &(&sig->stats_lock)->lock
0xffffa1fe4cb04610: &(__futex_data.queues)[i].lock
0xffffa1fe4cb07750: &(__futex_data.queues)[i].lock
0xffffa1fe4cb07b50: &(__futex_data.queues)[i].lock
0xffffa1fe4cb0b850: &(__futex_data.queues)[i].lock
0xffffa1fe4cb0bcd0: &(__futex_data.queues)[i].lock
0xffffa1fe4cb0e5d0: &(__futex_data.queues)[i].lock
0xffffa1fe4cb11ad0: &(__futex_data.queues)[i].lock
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220127000050.3011493-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As evsel__intval() returns u64, we can just use it as is.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220127000050.3011493-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hlist_head has a single entry so we can save some memory.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220127000050.3011493-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Likewise, it should use a proper name in case the task runs under
chroot.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220202070828.143303-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When reading build-id from a DSO, it should consider if it's from a
chroot task. In that case, the path is different so it needs to prepend
the root directory to access the file correctly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220202070828.143303-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently it doesn't handle tasks in chroot properly. As filenames in
MMAP records base on their root directory, it's different than what perf
tool can see from outside.
Add filename_with_chroot() helper to deal with those cases. The
function returns a new filename only if it's in a different root
directory. Since it needs to access /proc for the process, it only
works until the task exits.
With this change, I can see symbols in my program like below.
# perf record -o- chroot myroot myprog 3 | perf report -i-
...
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. .............................
#
99.83% myprog myprog [.] loop
0.04% chroot [kernel.kallsyms] [k] fxregs_fixup
0.04% chroot [kernel.kallsyms] [k] rsm_load_seg_32
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220202070828.143303-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Otherwise, this test does not find the sysctl entry in place:
sysctl: cannot stat /proc/sys/net/netfilter/nf_conntrack_tcp_loose: No such file or directory
iperf3: error - unable to send control message: Bad file descriptor
FAIL: iperf3 returned an error
Fixes: 7152303cbe ("selftests: netfilter: add synproxy test")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Test TIMESTAMPING and TXTIME across UDP / ICMP and IP versions.
Before ICMPv6 support:
# ./tools/testing/selftests/net/cmsg_time.sh
Case ICMPv6 - ts cnt returned '0', expected '2'
Case ICMPv6 - ts0 SCHED returned '', expected 'OK'
Case ICMPv6 - ts0 SND returned '', expected 'OK'
Case ICMPv6 - TXTIME abs returned '', expected 'OK'
Case ICMPv6 - TXTIME rel returned '', expected 'OK'
FAIL - 5/36 cases failed
After:
# ./tools/testing/selftests/net/cmsg_time.sh
OK
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support requesting Tx timestamps:
$ ./cmsg_sender -p i -t -4 $tgt 123 -d 1000
SCHED ts0 61us
SND ts0 1071us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test if setting SO_MARK with setsockopt works and if cmsg
takes precedence over it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use new capabilities of cmsg_sender to test ICMP and RAW sockets,
previously only UDP was tested.
Before SO_MARK support was added to ICMPv6:
# ./cmsg_so_mark.sh
Case ICMP rejection returned 0, expected 1
FAIL - 1/12 cases failed
After:
# ./cmsg_so_mark.sh
OK
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support sending fake ICMP(v6) messages and UDP via RAW sockets.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parametrize the code so that it can support UDP and ICMP
sockets in the future, and more cmsg types.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function also writes the name of the test with its ID, making clear
a new test has been executed.
Without that, the ADD_ADDR results from this test was appended at the
end of the previous test causing confusions. Especially when the second
test was failing, we had:
17 signal invalid addresses syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
add[fail] got 2 ADD_ADDR[s] expected 3
In fact, this 17th test was OK but not the 18th one.
Now we have:
17 signal invalid addresses syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
18 signal addresses race test syn[fail] got 2 JOIN[s] syn expected 3
- synack[fail] got 2 JOIN[s] synack expected
- ack[fail] got 2 JOIN[s] ack expected 3
add[fail] got 2 ADD_ADDR[s] expected 3
Fixes: 33c563ad28 ("selftests: mptcp: add_addr and echo race test")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-02-09
We've added 126 non-merge commits during the last 16 day(s) which contain
a total of 201 files changed, 4049 insertions(+), 2215 deletions(-).
The main changes are:
1) Add custom BPF allocator for JITs that pack multiple programs into a huge
page to reduce iTLB pressure, from Song Liu.
2) Add __user tagging support in vmlinux BTF and utilize it from BPF
verifier when generating loads, from Yonghong Song.
3) Add per-socket fast path check guarding from cgroup/BPF overhead when
used by only some sockets, from Pavel Begunkov.
4) Continued libbpf deprecation work of APIs/features and removal of their
usage from samples, selftests, libbpf & bpftool, from Andrii Nakryiko
and various others.
5) Improve BPF instruction set documentation by adding byte swap
instructions and cleaning up load/store section, from Christoph Hellwig.
6) Switch BPF preload infra to light skeleton and remove libbpf dependency
from it, from Alexei Starovoitov.
7) Fix architecture-agnostic macros in libbpf for accessing syscall
arguments from BPF progs for non-x86 architectures,
from Ilya Leoshkevich.
8) Rework port members in struct bpf_sk_lookup and struct bpf_sock to be
of 16-bit field with anonymous zero padding, from Jakub Sitnicki.
9) Add new bpf_copy_from_user_task() helper to read memory from a different
task than current. Add ability to create sleepable BPF iterator progs,
from Kenny Yu.
10) Implement XSK batching for ice's zero-copy driver used by AF_XDP and
utilize TX batching API from XSK buffer pool, from Maciej Fijalkowski.
11) Generate temporary netns names for BPF selftests to avoid naming
collisions, from Hangbin Liu.
12) Implement bpf_core_types_are_compat() with limited recursion for
in-kernel usage, from Matteo Croce.
13) Simplify pahole version detection and finally enable CONFIG_DEBUG_INFO_DWARF5
to be selected with CONFIG_DEBUG_INFO_BTF, from Nathan Chancellor.
14) Misc minor fixes to libbpf and selftests from various folks.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (126 commits)
selftests/bpf: Cover 4-byte load from remote_port in bpf_sk_lookup
bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide
libbpf: Fix compilation warning due to mismatched printf format
selftests/bpf: Test BPF_KPROBE_SYSCALL macro
libbpf: Add BPF_KPROBE_SYSCALL macro
libbpf: Fix accessing the first syscall argument on s390
libbpf: Fix accessing the first syscall argument on arm64
libbpf: Allow overriding PT_REGS_PARM1{_CORE}_SYSCALL
selftests/bpf: Skip test_bpf_syscall_macro's syscall_arg1 on arm64 and s390
libbpf: Fix accessing syscall arguments on riscv
libbpf: Fix riscv register names
libbpf: Fix accessing syscall arguments on powerpc
selftests/bpf: Use PT_REGS_SYSCALL_REGS in bpf_syscall_macro
libbpf: Add PT_REGS_SYSCALL_REGS macro
selftests/bpf: Fix an endianness issue in bpf_syscall_macro test
bpf: Fix bpf_prog_pack build HPAGE_PMD_SIZE
bpf: Fix leftover header->pages in sparc and powerpc code.
libbpf: Fix signedness bug in btf_dump_array_data()
selftests/bpf: Do not export subtest as standalone test
bpf, x86_64: Fail gracefully on bpf_jit_binary_pack_finalize failures
...
====================
Link: https://lore.kernel.org/r/20220209210050.8425-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the context access tests for sk_lookup prog to cover the surprising
case of a 4-byte load from the remote_port field, where the expected value
is actually shifted by 16 bits.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220209184333.654927-3-jakub@cloudflare.com
On ppc64le architecture __s64 is long int and requires %ld. Cast to
ssize_t and use %zd to avoid architecture-specific specifiers.
Fixes: 4172843ed4 ("libbpf: Fix signedness bug in btf_dump_array_data()")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220209063909.1268319-1-andrii@kernel.org
When the nft_concat_range test failed, it exit 1 in the code
specifically.
But when part of, or all of the test passed, it will failed the
[ ${passed} -eq 0 ] check and thus exit with 1, which is the same
exit value with failure result. Fix it by exit 0 when passed is not 0.
Fixes: 611973c1e0 ("selftests: netfilter: Introduce tests for sets with range concatenation")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Simple test for synproxy feature, iperf3 should be intercepted
by synproxy netns, but connection should still succeed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
At this point the subsystem can enumerate all CXL ports (CXL.mem decode
resources in upstream switch ports and host bridges) in a system. The
last mile is connecting those ports to endpoints.
The cxl_mem driver connects an endpoint device to the platform CXL.mem
protoctol decode-topology. At ->probe() time it walks its
device-topology-ancestry and adds a CXL Port object at every Upstream
Port hop until it gets to CXL root. The CXL root object is only present
after a platform firmware driver registers platform CXL resources. For
ACPI based platform this is managed by the ACPI0017 device and the
cxl_acpi driver.
The ports are registered such that disabling a given port automatically
unregisters all descendant ports, and the chain can only be registered
after the root is established.
Given ACPI device scanning may run asynchronously compared to PCI device
scanning the root driver is tasked with rescanning the bus after the
root successfully probes.
Conversely if any ports in a chain between the root and an endpoint
becomes disconnected it subsequently triggers the endpoint to
unregister. Given lock depenedencies the endpoint unregistration happens
in a workqueue asynchronously. If userspace cares about synchronizing
delayed work after port events the /sys/bus/cxl/flush attribute is
available for that purpose.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[djbw: clarify changelog, rework hotplug support]
Link: https://lore.kernel.org/r/164398782997.903003.9725273241627693186.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Per the CXL specification (8.1.12.2 Memory Device PCIe Capabilities and
Extended Capabilities) the Device Serial Number capability is mandatory.
Emit it for user tooling to identify devices.
It is reasonable to ask whether the attribute should be added to the
list of PCI sysfs device attributes. The PCI layer can optionally emit
it too, but the CXL subsystem is aiming to preserve its independence and
the possibility of CXL topologies with non-PCI devices in it. To date
that has only proven useful for the 'cxl_test' model, but as can be seen
with seen with ACPI0016 devices, sometimes all that is needed is a
platform firmware table to point to CXL Component Registers in MMIO
space to define a "CXL" device.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164366608838.196598.16856227191534267098.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL 2.0 8.1.3.8.2 states:
Memory_Active: When set, indicates that the CXL Range 1 memory is
fully initialized and available for software use. Must be set within
Range 1. Memory_Active_Timeout of deassertion of reset to CXL device
if CXL.mem HwInit Mode=1
Unfortunately, Memory_Active can take quite a long time depending on
media size (up to 256s per 2.0 spec). Provide a callback for the
eventual establishment of CXL.mem operations via the 'cxl_mem' driver
the 'struct cxl_memdev'. The implementation waits for 60s by default for
now and can be overridden by the mbox_ready_time module parameter.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
[djbw: switch to sleeping wait]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164298427373.3018233.9309741847039301834.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that dport and decoder enumeration is centralized in the port
driver, the @host argument for these helpers can be made implicit. For
the root port the host is the port's uport device (ACPI0017 for
cxl_acpi), and for all other descendant ports the devm context is the
parent of @port.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/164375043390.484143.17617734732003230076.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The need for a CXL port driver and a dedicated cxl_bus_type is driven by
a need to simultaneously support 2 independent physical memory decode
domains (cache coherent CXL.mem and uncached PCI.mmio) that also
intersect at a single PCIe device node. A CXL Port is a device that
advertises a CXL Component Register block with an "HDM Decoder
Capability Structure".
>From Documentation/driver-api/cxl/memory-devices.rst:
Similar to how a RAID driver takes disk objects and assembles them into
a new logical device, the CXL subsystem is tasked to take PCIe and ACPI
objects and assemble them into a CXL.mem decode topology. The need for
runtime configuration of the CXL.mem topology is also similar to RAID in
that different environments with the same hardware configuration may
decide to assemble the topology in contrasting ways. One may choose
performance (RAID0) striping memory across multiple Host Bridges and
endpoints while another may opt for fault tolerance and disable any
striping in the CXL.mem topology.
The port driver identifies whether an endpoint Memory Expander is
connected to a CXL topology. If an active (bound to the 'cxl_port'
driver) CXL Port is not found at every PCIe Switch Upstream port and an
active "root" CXL Port then the device is just a plain PCIe endpoint
only capable of participating in PCI.mmio and DMA cycles, not CXL.mem
coherent interleave sets.
The 'cxl_port' driver lets the CXL subsystem leverage driver-core
infrastructure for setup and teardown of register resources and
communicating device activation status to userspace. The cxl_bus_type
can rendezvous the async arrival of platform level CXL resources (via
the 'cxl_acpi' driver) with the asynchronous enumeration of Memory
Expander endpoints, while also implementing a hierarchical locking model
independent of the associated 'struct pci_dev' locking model. The
locking for dport and decoder enumeration is now handled in the core
rather than callers.
For now the port driver only enumerates and registers CXL resources
(downstream port metadata and decoder resources) later it will be used
to take action on its decoders in response to CXL.mem region
provisioning requests.
Note1: cxlpci.h has long depended on pci.h, but port.c was the first to
not include pci.h. Carry that dependency in cxlpci.h.
Note2: cxl port enumeration and probing complicates CXL subsystem init
to the point that it helps to have centralized debug logging of probe
events in cxl_bus_probe().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/164374948116.464348.1772618057599155408.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Unlike the decoder enumeration for "root decoders" described by platform
firmware, standard decoders can be enumerated from the component
registers space once the base address has been identified (via PCI,
ACPI, or another mechanism).
Add common infrastructure for HDM (Host-managed-Device-Memory) Decoder
enumeration and share it between host-bridge, upstream switch port, and
cxl_test defined decoders.
The locking model for switch level decoders is to hold the port lock
over the enumeration. This facilitates moving the dport and decoder
enumeration to a 'port' driver. For now, the only enumerator of decoder
resources is the cxl_acpi root driver.
Co-developed-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164374688404.395335.9239248252443123526.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The core houses infrastructure for decoder resources. A CXL port's
dports are more closely related to decoder infrastructure than topology
enumeration. Implement generic PCI based dport enumeration in the core,
i.e. arrange for existing root port enumeration from cxl_acpi to share
code with switch port enumeration which just amounts to a small
difference in a pci_walk_bus() invocation once the appropriate 'struct
pci_bus' has been retrieved.
Set the convention that decoder objects are registered after all dports
are enumerated. This enables userspace to know when the CXL core is
finished establishing 'dportX' links underneath the 'portX' object.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164368114191.354031.5270501846455462665.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for switch port enumeration while also preserving the
potential for multi-domain / multi-root CXL topologies. Introduce a
'struct device' generic mechanism for retrieving a root CXL port, if one
is registered. Note that the only known multi-domain CXL configurations
are running the cxl_test unit test on a system that also publishes an
ACPI0017 device.
With this in hand the nvdimm-bridge lookup can be with
device_find_child() instead of bus_find_device() + custom mocked lookup
infrastructure in cxl_test.
The mechanism looks for a 2nd level port since the root level topology
is platform-firmware specific and the 2nd level down follows standard
PCIe topology expectations. The cxl_acpi 2nd level is associated with a
PCIe Root Port.
Reported-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164367562182.225521.9488555616768096049.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add syscall-specific variant of BPF_KPROBE named BPF_KPROBE_SYSCALL ([0]).
The new macro hides the underlying way of getting syscall input arguments.
With the new macro, the following code:
SEC("kprobe/__x64_sys_close")
int BPF_KPROBE(do_sys_close, struct pt_regs *regs)
{
int fd;
fd = PT_REGS_PARM1_CORE(regs);
/* do something with fd */
}
can be written as:
SEC("kprobe/__x64_sys_close")
int BPF_KPROBE_SYSCALL(do_sys_close, int fd)
{
/* do something with fd */
}
[0] Closes: https://github.com/libbpf/libbpf/issues/425
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220207143134.2977852-2-hengqi.chen@gmail.com
On s390, the first syscall argument should be accessed via orig_gpr2
(see arch/s390/include/asm/syscall.h). Currently gpr[2] is used
instead, leading to bpf_syscall_macro test failure.
orig_gpr2 cannot be added to user_pt_regs, since its layout is a part
of the ABI. Therefore provide access to it only through
PT_REGS_PARM1_CORE_SYSCALL() by using a struct pt_regs flavor.
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209021745.2215452-11-iii@linux.ibm.com
On arm64, the first syscall argument should be accessed via orig_x0
(see arch/arm64/include/asm/syscall.h). Currently regs[0] is used
instead, leading to bpf_syscall_macro test failure.
orig_x0 cannot be added to struct user_pt_regs, since its layout is a
part of the ABI. Therefore provide access to it only through
PT_REGS_PARM1_CORE_SYSCALL() by using a struct pt_regs flavor.
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209021745.2215452-10-iii@linux.ibm.com
These architectures can provide access to the first syscall argument
only through PT_REGS_PARM1_CORE_SYSCALL().
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209021745.2215452-8-iii@linux.ibm.com
riscv does not select ARCH_HAS_SYSCALL_WRAPPER, so its syscall
handlers take "unpacked" syscall arguments. Indicate this to libbpf
using PT_REGS_SYSCALL_REGS macro.
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209021745.2215452-7-iii@linux.ibm.com
riscv registers are accessed via struct user_regs_struct, not struct
pt_regs. The program counter member in this struct is called pc, not
epc. The frame pointer is called s0, not fp.
Fixes: 3cc31d7940 ("libbpf: Normalize PT_REGS_xxx() macro definitions")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209021745.2215452-6-iii@linux.ibm.com
powerpc does not select ARCH_HAS_SYSCALL_WRAPPER, so its syscall
handlers take "unpacked" syscall arguments. Indicate this to libbpf
using PT_REGS_SYSCALL_REGS macro.
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Link: https://lore.kernel.org/bpf/20220209021745.2215452-5-iii@linux.ibm.com
Architectures that select ARCH_HAS_SYSCALL_WRAPPER pass a pointer to
struct pt_regs to syscall handlers, others unpack it into individual
function parameters. Introduce a macro to describe what a particular
arch does.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209021745.2215452-3-iii@linux.ibm.com
bpf_syscall_macro reads a long argument into an int variable, which
produces a wrong value on big-endian systems. Fix by reading the
argument into an intermediate long variable first.
Fixes: 77fc0330df ("selftests/bpf: Add a test to confirm PT_REGS_PARM4_SYSCALL")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209021745.2215452-2-iii@linux.ibm.com
The btf__resolve_size() function returns negative error codes so
"elem_size" must be signed for the error handling to work.
Fixes: 920d16af9b ("libbpf: BTF dumper support for typed data")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220208071552.GB10495@kili
Two subtests in ksyms_module.c are not qualified as static, so these
subtests are exported as standalone tests in tests.h and lead to
confusion for the output of "./test_progs -t ksyms_module".
By using the following command ...
grep "^void \(serial_\)\?test_[a-zA-Z0-9_]\+(\(void\)\?)" \
tools/testing/selftests/bpf/prog_tests/*.c | \
awk -F : '{print $1}' | sort | uniq -c | awk '$1 != 1'
... one finds out that other tests also have a similar problem, so
fix these tests by marking subtests in these tests as static.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220208065444.648778-1-houtao1@huawei.com
This commit adjusts RUDE01 to 3 CPUs and TRACE01 to 5 CPUs in order to
test Tasks RCU's ability to handle non-power-of-two numbers of CPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Thie commit adds kernel boot parameters to the SRCU-N and SRCU-P
rcutorture scenarios to cause SRCU-N to test contention-based resizing
and SRCU-P to test init_srcu_struct()-time resizing. Note that this
also tests never-resizing because the contention-based resizing normally
takes some minutes to make the shift.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit fixes a couple of typos: s/--doall/--do-all/ and
s/--doallmodconfig/--do-allmodconfig/.
[ paulmck: Add Fixes: supplied by Paul Menzel. ]
Fixes: a115a775a8 ("torture: Add "make allmodconfig" to torture.sh")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
* kvm-arm64/pmu-bl:
: .
: Improve PMU support on heterogeneous systems, courtesy of Alexandru Elisei
: .
KVM: arm64: Refuse to run VCPU if the PMU doesn't match the physical CPU
KVM: arm64: Add KVM_ARM_VCPU_PMU_V3_SET_PMU attribute
KVM: arm64: Keep a list of probed PMUs
KVM: arm64: Keep a per-VM pointer to the default PMU
perf: Fix wrong name in comment for struct perf_cpu_context
KVM: arm64: Do not change the PMU event filter after a VCPU has run
Signed-off-by: Marc Zyngier <maz@kernel.org>
When KVM creates an event and there are more than one PMUs present on the
system, perf_init_event() will go through the list of available PMUs and
will choose the first one that can create the event. The order of the PMUs
in this list depends on the probe order, which can change under various
circumstances, for example if the order of the PMU nodes change in the DTB
or if asynchronous driver probing is enabled on the kernel command line
(with the driver_async_probe=armv8-pmu option).
Another consequence of this approach is that on heteregeneous systems all
virtual machines that KVM creates will use the same PMU. This might cause
unexpected behaviour for userspace: when a VCPU is executing on the
physical CPU that uses this default PMU, PMU events in the guest work
correctly; but when the same VCPU executes on another CPU, PMU events in
the guest will suddenly stop counting.
Fortunately, perf core allows user to specify on which PMU to create an
event by using the perf_event_attr->type field, which is used by
perf_init_event() as an index in the radix tree of available PMUs.
Add the KVM_ARM_VCPU_PMU_V3_CTRL(KVM_ARM_VCPU_PMU_V3_SET_PMU) VCPU
attribute to allow userspace to specify the arm_pmu that KVM will use when
creating events for that VCPU. KVM will make no attempt to run the VCPU on
the physical CPUs that share the PMU, leaving it up to userspace to manage
the VCPU threads' affinity accordingly.
To ensure that KVM doesn't expose an asymmetric system to the guest, the
PMU set for one VCPU will be used by all other VCPUs. Once a VCPU has run,
the PMU cannot be changed in order to avoid changing the list of available
events for a VCPU, or to change the semantics of existing events.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127161759.53553-6-alexandru.elisei@arm.com
Muhammad Usama Anjum