Set the extent bits EXTENT_NORESERVE inside btrfs_dirty_pages() as
opposed to calling set_extent_bits again later.
Fold check for written length within the function.
Note: EXTENT_NORESERVE is set before unlocking extents.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
round_down looks prettier than the bit mask operations.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While using compression, a submitted bio is mapped with a compressed bio
which performs the read from disk, decompresses and returns uncompressed
data to original bio. The original bio must reflect the uncompressed
size (iosize) of the I/O to be performed, or else the page just gets the
decompressed I/O length of data (disk_io_size). The compressed bio
checks the extent map and gets the correct length while performing the
I/O from disk.
This came up in subpage work when only compressed length of the original
bio was filled in the page. This worked correctly for pagesize ==
sectorsize because both compressed and uncompressed data are at pagesize
boundaries, and would end up filling the requested page.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
write_bytes can change in btrfs_check_nocow_lock(). Calculate variables
such as num_pages and reserve_bytes once we are sure of the value of
write_bytes so there is no need to re-calculate.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If transaction_kthread is woken up before btrfs_fs_info::commit_interval
seconds have elapsed it will sleep for a fixed period of 5 seconds. This
is not a problem per-se but is not accurate. Instead the code should
sleep for an interval which guarantees on next wakeup commit_interval
would have passed. Since time tracking is not precise subtract 1 second
from delta to ensure the delay we end up waiting will be longer than
than the wake up period.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rename 'now' to 'delta' and store there the delta between transaction
start time and current time. This is in preparation for optimising the
sleep logic in the next patch. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The value obtained from ktime_get_seconds() is guaranteed to be
monotonically increasing since it's taken from CLOCK_MONOTONIC. As
transaction_kthread obtains a reference to the currently running
transaction under holding btrfs_fs_info::trans_lock it's guaranteed to:
a) see an initialized 'cur', whose start_time is guaranteed to be smaller
than 'now'
or
b) not obtain a 'cur' and simply go to sleep.
Given this remove the unnecessary check, if it sees
now < cur->start_time this would imply there are far greater problems on
the machine.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The kernel provides easy to understand helpers to convert from human
understandable units to the kernel-friendly 'jiffies'. So let's use
those to make the code easier to understand. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Matching with the information that's available from the ioctl
FS_INFO, add generation to the per-filesystem directory
/sys/fs/btrfs/UUID/generation, which could be used by scripts.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Here are some small driver fixes, and one "large" revert, for 5.10-rc7.
They include:
- revert mei patch from 5.10-rc1 that was using a reserved
userspace value. It will be resubmitted once the proper id
has been assigned by the virtio people.
- habanalabs fixes found by the fall-through audit from Gustavo
- speakup driver fixes for reported issues
- fpga config build fix for reported issue.
All of these except the revert have been in linux-next with no reported
issues. The revert is "clean" and just removes a previously-added
driver, so no real issue there.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX8zr3g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk4LwCgz1KKObSoSy8TdbSneDlAZuJlhS0AniwKDQ8g
EobiywN+/Q3KP5jGF4Km
=8rD3
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small driver fixes, and one "large" revert, for
5.10-rc7.
They include:
- revert mei patch from 5.10-rc1 that was using a reserved userspace
value. It will be resubmitted once the proper id has been assigned
by the virtio people.
- habanalabs fixes found by the fall-through audit from Gustavo
- speakup driver fixes for reported issues
- fpga config build fix for reported issue.
All of these except the revert have been in linux-next with no
reported issues. The revert is "clean" and just removes a
previously-added driver, so no real issue there"
* tag 'char-misc-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Revert "mei: virtio: virtualization frontend driver"
fpga: Specify HAS_IOMEM dependency for FPGA_DFL
habanalabs: put devices before driver removal
habanalabs: free host huge va_range if not used
speakup: Reject setting the speakup line discipline outside of speakup
Here are two tty core fixes for 5.10-rc7.
They resolve some reported locking issues in the tty core. While they
have not been in a released linux-next yet, they have passed all of the
0-day bot testing as well as the submitter's testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX8zqVA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn6aACgiBghNkA6SJIjM1mcPCI/Nkvs3qoAn0g+l8Z1
zATUgLS4xqAHnYXUfHpy
=eB5C
-----END PGP SIGNATURE-----
Merge tag 'tty-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fixes from Greg KH:
"Here are two tty core fixes for 5.10-rc7.
They resolve some reported locking issues in the tty core. While they
have not been in a released linux-next yet, they have passed all of
the 0-day bot testing as well as the submitter's testing"
* tag 'tty-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Fix ->session locking
tty: Fix ->pgrp locking in tiocspgrp()
Here are some small USB fixes for 5.10-rc7 that resolve a number of
reported issues, and add some new device ids.
Nothing major here, but these solve some problems that people were
having with the 5.10-rc tree:
- reverts for USB storage dma settings that broke working
devices
- thunderbolt use-after-free fix
- cdns3 driver fixes
- gadget driver userspace copy fix
- new device ids
All of these except for the reverts have been in linux-next with no
reported issues. The reverts are "clean" and were tested by Hans, as
well as passing the 0-day tests.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX8zrIA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykf6wCgrsGpsGBvmUuL+ntikJ2G7dUIZp0AoM0f/cbC
wxbI9WQm4iZKLsl0t0v9
=Cua9
-----END PGP SIGNATURE-----
Merge tag 'usb-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.10-rc7 that resolve a number of
reported issues, and add some new device ids.
Nothing major here, but these solve some problems that people were
having with the 5.10-rc tree:
- reverts for USB storage dma settings that broke working devices
- thunderbolt use-after-free fix
- cdns3 driver fixes
- gadget driver userspace copy fix
- new device ids
All of these except for the reverts have been in linux-next with no
reported issues. The reverts are "clean" and were tested by Hans, as
well as passing the 0-day tests"
* tag 'usb-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: f_fs: Use local copy of descriptors for userspace copy
usb: ohci-omap: Fix descriptor conversion
Revert "usb-storage: fix sdev->host->dma_dev"
Revert "uas: fix sdev->host->dma_dev"
Revert "uas: bump hw_max_sectors to 2048 blocks for SS or faster drives"
USB: serial: kl5kusb105: fix memleak on open
USB: serial: ch341: sort device-id entries
USB: serial: ch341: add new Product ID for CH341A
USB: serial: option: fix Quectel BG96 matching
usb: cdns3: core: fix goto label for error path
usb: cdns3: gadget: clear trb->length as zero after preparing every trb
usb: cdns3: Fix hardware based role switch
USB: serial: option: add support for Thales Cinterion EXS82
USB: serial: option: add Fibocom NL668 variants
thunderbolt: Fix use-after-free in remove_unplugged_switch()
- Make the AMD L3 QoS code and data priorization enable/disable mechanism
work correctly. The control bit was only set/cleared on one of the CPUs
in a L3 domain, but it has to be modified on all CPUs in the domain. The
initial documentation was not clear about this, but the updated one from
Oct 2020 spells it out.
- Fix an off by one in the UV platform detection code which causes the UV
hubs to be identified wrongly. The chip revisions start at 1 not at 0.
- Fix a long standing bug in the evaluation of prefixes in the uprobes
code which fails to handle repeated prefixes properly. The aggregate
size of the prefixes can be larger than the bytes array but the code
blindly iterated over the aggregate size beyond the array boundary.
Add a macro to handle this case properly and use it at the affected
places.
-----BEGIN PGP SIGNATURE-----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=rNBq
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Make the AMD L3 QoS code and data priorization enable/disable
mechanism work correctly.
The control bit was only set/cleared on one of the CPUs in a L3
domain, but it has to be modified on all CPUs in the domain. The
initial documentation was not clear about this, but the updated one
from Oct 2020 spells it out.
- Fix an off by one in the UV platform detection code which causes
the UV hubs to be identified wrongly.
The chip revisions start at 1 not at 0.
- Fix a long standing bug in the evaluation of prefixes in the
uprobes code which fails to handle repeated prefixes properly.
The aggregate size of the prefixes can be larger than the bytes
array but the code blindly iterated over the aggregate size beyond
the array boundary. Add a macro to handle this case properly and
use it at the affected places"
* tag 'x86-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev-es: Use new for_each_insn_prefix() macro to loop over prefixes bytes
x86/insn-eval: Use new for_each_insn_prefix() macro to loop over prefixes bytes
x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytes
x86/platform/uv: Fix UV4 hub revision adjustment
x86/resctrl: Fix AMD L3 QOS CDP enable/disable
- Add recursion protection to another callchain invoked from
x86_pmu_stop() which can recurse back into x86_pmu_stop(). The first
attempt to fix this missed this extra code path.
- Use the already filtered status variable to check for PEBS counter
overflow bits and not the unfiltered full status read from
IA32_PERF_GLOBAL_STATUS which can have unrelated bits check which
would be evaluated incorrectly.
-----BEGIN PGP SIGNATURE-----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=YbCo
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Two fixes for performance monitoring on X86:
- Add recursion protection to another callchain invoked from
x86_pmu_stop() which can recurse back into x86_pmu_stop(). The
first attempt to fix this missed this extra code path.
- Use the already filtered status variable to check for PEBS counter
overflow bits and not the unfiltered full status read from
IA32_PERF_GLOBAL_STATUS which can have unrelated bits check which
would be evaluated incorrectly"
* tag 'perf-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Check PEBS status correctly
perf/x86/intel: Fix a warning on x86_pmu_stop() with large PEBS
- Make multiqueue devices which use the managed interrupt affinity
infrastructure work on PowerPC/Pseries. PowerPC does not use the
generic infrastructure for setting up PCI/MSI interrupts and the
multiqueue changes failed to update the legacy PCI/MSI infrastructure.
Make this work by passing the affinity setup information down to the
mapping and allocation functions.
- Move Jason Cooper from MAINTAINERS to CREDITS as his mail is bouncing
and he's not reachable. We hope all is well with him and say thanks
for his work over the years.
-----BEGIN PGP SIGNATURE-----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=/DKJ
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of updates for the interrupt subsystem:
- Make multiqueue devices which use the managed interrupt affinity
infrastructure work on PowerPC/Pseries. PowerPC does not use the
generic infrastructure for setting up PCI/MSI interrupts and the
multiqueue changes failed to update the legacy PCI/MSI
infrastructure. Make this work by passing the affinity setup
information down to the mapping and allocation functions.
- Move Jason Cooper from MAINTAINERS to CREDITS as his mail is
bouncing and he's not reachable. We hope all is well with him and
say thanks for his work over the years"
* tag 'irq-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
powerpc/pseries: Pass MSI affinity to irq_create_mapping()
genirq/irqdomain: Add an irq_create_mapping_affinity() function
MAINTAINERS: Move Jason Cooper to CREDITS
a CONFIG dependency and broke the build for certain configurations.
-----BEGIN PGP SIGNATURE-----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=uXsp
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull intel_idle build fix from Thomas Gleixner:
"A tiny build fix for a recent change in the intel_idle driver which
missed a CONFIG dependency and broke the build for certain
configurations"
* tag 'locking-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
intel_idle: Build fix
- Move -Wcast-align to W=3, which tends to be false-positive and there
is no tree-wide solution.
- Pass -fmacro-prefix-map to KBUILD_CPPFLAGS because it is a preprocessor
option and makes sense for .S files as well.
- Disable -gdwarf-2 for Clang's integrated assembler to avoid warnings.
- Disable --orphan-handling=warn for LLD 10.0.1 to avoid warnings.
- Fix undesirable line breaks in *.mod files.
-----BEGIN PGP SIGNATURE-----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=/ysh
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Move -Wcast-align to W=3, which tends to be false-positive and there
is no tree-wide solution.
- Pass -fmacro-prefix-map to KBUILD_CPPFLAGS because it is a
preprocessor option and makes sense for .S files as well.
- Disable -gdwarf-2 for Clang's integrated assembler to avoid warnings.
- Disable --orphan-handling=warn for LLD 10.0.1 to avoid warnings.
- Fix undesirable line breaks in *.mod files.
* tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: avoid split lines in .mod files
kbuild: Disable CONFIG_LD_ORPHAN_WARN for ld.lld 10.0.1
kbuild: Hoist '--orphan-handling' into Kconfig
Kbuild: do not emit debug info for assembly with LLVM_IAS=1
kbuild: use -fmacro-prefix-map for .S sources
Makefile.extrawarn: move -Wcast-align to W=3
Merge misc fixes from Andrew Morton:
"12 patches.
Subsystems affected by this patch series: mm (memcg, zsmalloc, swap,
mailmap, selftests, pagecache, hugetlb, pagemap), lib, and coredump"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/mmap.c: fix mmap return value when vma is merged after call_mmap()
hugetlb_cgroup: fix offline of hugetlb cgroup with reservations
mm/filemap: add static for function __add_to_page_cache_locked
userfaultfd: selftests: fix SIGSEGV if huge mmap fails
tools/testing/selftests/vm: fix build error
mailmap: add two more addresses of Uwe Kleine-König
mm/swapfile: do not sleep with a spin lock held
mm/zsmalloc.c: drop ZSMALLOC_PGTABLE_MAPPING
mm: list_lru: set shrinker map bit when child nr_items is not zero
mm: memcg/slab: fix obj_cgroup_charge() return value handling
coredump: fix core_pattern parse error
zlib: export S390 symbols for zlib modules
On success, mmap should return the begin address of newly mapped area,
but patch "mm: mmap: merge vma after call_mmap() if possible" set
vm_start of newly merged vma to return value addr. Users of mmap will
get wrong address if vma is merged after call_mmap(). We fix this by
moving the assignment to addr before merging vma.
We have a driver which changes vm_flags, and this bug is found by our
testcases.
Fixes: d70cec8983 ("mm: mmap: merge vma after call_mmap() if possible")
Signed-off-by: Liu Zixian <liuzixian4@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Hongxiang Lou <louhongxiang@huawei.com>
Cc: Hu Shiyuan <hushiyuan@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Link: https://lkml.kernel.org/r/20201203085350.22624-1-liuzixian4@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Moreno was ruuning a kubernetes 1.19 + containerd/docker workload
using hugetlbfs. In this environment the issue is reproduced by:
- Start a simple pod that uses the recently added HugePages medium
feature (pod yaml attached)
- Start a DPDK app. It doesn't need to run successfully (as in transfer
packets) nor interact with real hardware. It seems just initializing
the EAL layer (which handles hugepage reservation and locking) is
enough to trigger the issue
- Delete the Pod (or let it "Complete").
This would result in a kworker thread going into a tight loop (top output):
1425 root 20 0 0 0 0 R 99.7 0.0 5:22.45 kworker/28:7+cgroup_destroy
'perf top -g' reports:
- 63.28% 0.01% [kernel] [k] worker_thread
- 49.97% worker_thread
- 52.64% process_one_work
- 62.08% css_killed_work_fn
- hugetlb_cgroup_css_offline
41.52% _raw_spin_lock
- 2.82% _cond_resched
rcu_all_qs
2.66% PageHuge
- 0.57% schedule
- 0.57% __schedule
We are spinning in the do-while loop in hugetlb_cgroup_css_offline.
Worse yet, we are holding the master cgroup lock (cgroup_mutex) while
infinitely spinning. Little else can be done on the system as the
cgroup_mutex can not be acquired.
Do note that the issue can be reproduced by simply offlining a hugetlb
cgroup containing pages with reservation counts.
The loop in hugetlb_cgroup_css_offline is moving page counts from the
cgroup being offlined to the parent cgroup. This is done for each
hstate, and is repeated until hugetlb_cgroup_have_usage returns false.
The routine moving counts (hugetlb_cgroup_move_parent) is only moving
'usage' counts. The routine hugetlb_cgroup_have_usage is checking for
both 'usage' and 'reservation' counts. Discussion about what to do with
reservation counts when reparenting was discussed here:
https://lore.kernel.org/linux-kselftest/CAHS8izMFAYTgxym-Hzb_JmkTK1N_S9tGN71uS6MFV+R7swYu5A@mail.gmail.com/
The decision was made to leave a zombie cgroup for with reservation
counts. Unfortunately, the code checking reservation counts was
incorrectly added to hugetlb_cgroup_have_usage.
To fix the issue, simply remove the check for reservation counts. While
fixing this issue, a related bug in hugetlb_cgroup_css_offline was
noticed. The hstate index is not reinitialized each time through the
do-while loop. Fix this as well.
Fixes: 1adc4d419a ("hugetlb_cgroup: add interface for charge/uncharge hugetlb reservations")
Reported-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201203220242.158165-1-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The error handling in hugetlb_allocate_area() was incorrect for the
hugetlb_shared test case.
Previously the behavior was:
- mmap a hugetlb area
- If this fails, set the pointer to NULL, and carry on
- mmap an alias of the same hugetlb fd
- If this fails, munmap the original area
If the original mmap failed, it's likely the second one did too. If
both failed, we'd blindly try to munmap a NULL pointer, causing a
SIGSEGV. Instead, "goto fail" so we return before trying to mmap the
alias.
This issue can be hit "in real life" by forgetting to set
/proc/sys/vm/nr_hugepages (leaving it at 0), and then trying to run the
hugetlb_shared test.
Another small improvement is, when the original mmap fails, don't just
print "it failed": perror(), so we can see *why*. :)
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Alan Gilbert <dgilbert@redhat.com>
Link: https://lkml.kernel.org/r/20201204203443.2714693-1-axelrasmussen@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Only x86 and PowerPC implement the pkey-xxx.h, and an error was reported
when compiling protection_keys.c.
Add a Arch judgment to compile "protection_keys" in the Makefile.
If other arch implement this, add the arch name to the Makefile.
eg:
ifneq (,$(findstring $(ARCH),powerpc mips ... ))
Following build errors:
pkey-helpers.h:93:2: error: #error Architecture not supported
#error Architecture not supported
pkey-helpers.h:96:20: error: `PKEY_DISABLE_ACCESS' undeclared
#define PKEY_MASK (PKEY_DISABLE_ACCESS | PKEY_DISABLE_WRITE)
^
protection_keys.c:218:45: error: `PKEY_DISABLE_WRITE' undeclared
pkey_assert(flags & (PKEY_DISABLE_ACCESS | PKEY_DISABLE_WRITE));
^
Signed-off-by: Xingxing Su <suxingxing@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Link: https://lkml.kernel.org/r/1606826876-30656-1-git-send-email-suxingxing@loongson.cn
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes attribution for the commits (among others)
- d4097456cd ("video/framebuffer: move the probe func into
.devinit.text in Blackfin LCD driver")
- 0312e024d6 ("mfd: mc13xxx: Add support for mc34708")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20201127213358.3440830-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can't call kvfree() with a spin lock held, so defer it. Fixes a
might_sleep() runtime warning.
Fixes: 873d7bcfd0 ("mm/swapfile.c: use kvzalloc for swap_info_struct allocation")
Signed-off-by: Qian Cai <qcai@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201202151549.10350-1-qcai@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While I was doing zram testing, I found sometimes decompression failed
since the compression buffer was corrupted. With investigation, I found
below commit calls cond_resched unconditionally so it could make a
problem in atomic context if the task is reschedule.
BUG: sleeping function called from invalid context at mm/vmalloc.c:108
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 946, name: memhog
3 locks held by memhog/946:
#0: ffff9d01d4b193e8 (&mm->mmap_lock#2){++++}-{4:4}, at: __mm_populate+0x103/0x160
#1: ffffffffa3d53de0 (fs_reclaim){+.+.}-{0:0}, at: __alloc_pages_slowpath.constprop.0+0xa98/0x1160
#2: ffff9d01d56b8110 (&zspage->lock){.+.+}-{3:3}, at: zs_map_object+0x8e/0x1f0
CPU: 0 PID: 946 Comm: memhog Not tainted 5.9.3-00011-gc5bfc0287345-dirty #316
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
Call Trace:
unmap_kernel_range_noflush+0x2eb/0x350
unmap_kernel_range+0x14/0x30
zs_unmap_object+0xd5/0xe0
zram_bvec_rw.isra.0+0x38c/0x8e0
zram_rw_page+0x90/0x101
bdev_write_page+0x92/0xe0
__swap_writepage+0x94/0x4a0
pageout+0xe3/0x3a0
shrink_page_list+0xb94/0xd60
shrink_inactive_list+0x158/0x460
We can fix this by removing the ZSMALLOC_PGTABLE_MAPPING feature (which
contains the offending calling code) from zsmalloc.
Even though this option showed some amount improvement(e.g., 30%) in
some arm32 platforms, it has been headache to maintain since it have
abused APIs[1](e.g., unmap_kernel_range in atomic context).
Since we are approaching to deprecate 32bit machines and already made
the config option available for only builtin build since v5.8, lastly it
has been not default option in zsmalloc, it's time to drop the option
for better maintenance.
[1] http://lore.kernel.org/linux-mm/20201105170249.387069-1-minchan@kernel.org
Fixes: e47110e905 ("mm/vunmap: add cond_resched() in vunmap_pmd_range")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Harish Sriram <harish@linux.ibm.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201117202916.GA3856507@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When investigating a slab cache bloat problem, significant amount of
negative dentry cache was seen, but confusingly they neither got shrunk
by reclaimer (the host has very tight memory) nor be shrunk by dropping
cache. The vmcore shows there are over 14M negative dentry objects on
lru, but tracing result shows they were even not scanned at all.
Further investigation shows the memcg's vfs shrinker_map bit is not set.
So the reclaimer or dropping cache just skip calling vfs shrinker. So
we have to reboot the hosts to get the memory back.
I didn't manage to come up with a reproducer in test environment, and
the problem can't be reproduced after rebooting. But it seems there is
race between shrinker map bit clear and reparenting by code inspection.
The hypothesis is elaborated as below.
The memcg hierarchy on our production environment looks like:
root
/ \
system user
The main workloads are running under user slice's children, and it
creates and removes memcg frequently. So reparenting happens very often
under user slice, but no task is under user slice directly.
So with the frequent reparenting and tight memory pressure, the below
hypothetical race condition may happen:
CPU A CPU B
reparent
dst->nr_items == 0
shrinker:
total_objects == 0
add src->nr_items to dst
set_bit
return SHRINK_EMPTY
clear_bit
child memcg offline
replace child's kmemcg_id with
parent's (in memcg_offline_kmem())
list_lru_del() between shrinker runs
see parent's kmemcg_id
dec dst->nr_items
reparent again
dst->nr_items may go negative
due to concurrent list_lru_del()
The second run of shrinker:
read nr_items without any
synchronization, so it may
see intermediate negative
nr_items then total_objects
may return 0 coincidently
keep the bit cleared
dst->nr_items != 0
skip set_bit
add scr->nr_item to dst
After this point dst->nr_item may never go zero, so reparenting will not
set shrinker_map bit anymore. And since there is no task under user
slice directly, so no new object will be added to its lru to set the
shrinker map bit either. That bit is kept cleared forever.
How does list_lru_del() race with reparenting? It is because reparenting
replaces children's kmemcg_id to parent's without protecting from
nlru->lock, so list_lru_del() may see parent's kmemcg_id but actually
deleting items from child's lru, but dec'ing parent's nr_items, so the
parent's nr_items may go negative as commit 2788cf0c40 ("memcg:
reparent list_lrus and free kmemcg_id on css offline") says.
Since it is impossible that dst->nr_items goes negative and
src->nr_items goes zero at the same time, so it seems we could set the
shrinker map bit iff src->nr_items != 0. We could synchronize
list_lru_count_one() and reparenting with nlru->lock, but it seems
checking src->nr_items in reparenting is the simplest and avoids lock
contention.
Fixes: fae91d6d8b ("mm/list_lru.c: set bit in memcg shrinker bitmap on first list_lru item appearance")
Suggested-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org> [4.19]
Link: https://lkml.kernel.org/r/20201202171749.264354-1-shy828301@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 10befea91b ("mm: memcg/slab: use a single set of kmem_caches
for all allocations") introduced a regression into the handling of the
obj_cgroup_charge() return value. If a non-zero value is returned
(indicating of exceeding one of memory.max limits), the allocation
should fail, instead of falling back to non-accounted mode.
To make the code more readable, move memcg_slab_pre_alloc_hook() and
memcg_slab_post_alloc_hook() calling conditions into bodies of these
hooks.
Fixes: 10befea91b ("mm: memcg/slab: use a single set of kmem_caches for all allocations")
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201127161828.GD840171@carbon.dhcp.thefacebook.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
'format_corename()' will splite 'core_pattern' on spaces when it is in
pipe mode, and take helper_argv[0] as the path to usermode executable.
It works fine in most cases.
However, if there is a space between '|' and '/file/path', such as
'| /usr/lib/systemd/systemd-coredump %P %u %g', then helper_argv[0] will
be parsed as '', and users will get a 'Core dump to | disabled'.
It is not friendly to users, as the pattern above was valid previously.
Fix this by ignoring the spaces between '|' and '/file/path'.
Fixes: 315c69261d ("coredump: split pipe command whitespace before expanding template")
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Wise <pabs3@bonedaddy.net>
Cc: Jakub Wilk <jwilk@jwilk.net> [https://bugs.debian.org/924398]
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/5fb62870.1c69fb81.8ef5d.af76@mx.google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
"xargs echo" is not a safe way to remove line breaks because the input
may exceed the command line limit and xargs may break it up into
multiple invocations of echo. This should never happen because
scripts/gen_autoksyms.sh expects all undefined symbols are placed in
the second line of .mod files.
One possible way is to replace "xargs echo" with
"sed ':x;N;$!bx;s/\n/ /g'" or something, but I rewrote the code by
using awk because it is more readable.
This issue was reported by Sami Tolvanen; in his Clang LTO patch set,
$(multi-used-m) is no longer an ELF object, but a thin archive that
contains LLVM bitcode files. llvm-nm prints out symbols for each
archive member separately, which results a lot of dupications, in some
places, beyond the system-defined limit.
This problem must be fixed irrespective of LTO, and we must ensure
zero possibility of having this issue.
Link: https://lkml.org/lkml/2020/12/1/1658
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
This reverts commit d162219c65.
The device uses a VIRTIO device ID out of a not-for-production range.
Releasing Linux using an ID out of this range will make it conflict with
development setups. An official request to reserve an ID for an MEI
device is yet to be submitted to the virtio TC, thus there's no chance
it will be reserved and fixed in time before the next release.
Once requested it usually takes 2-3 weeks to land in the spec, which
means the device can be supported with the official ID in the next Linux
version if contributors act quickly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Alexander Usyskin <alexander.usyskin@intel.com>
Cc: Wang Yu <yu1.wang@intel.com>
Cc: Liu Shuo <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20201205193625.469773-1-mst@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since insn.prefixes.nbytes can be bigger than the size of
insn.prefixes.bytes[] when a prefix is repeated, the proper
check must be:
insn.prefixes.bytes[i] != 0 and i < 4
instead of using insn.prefixes.nbytes. Use the new
for_each_insn_prefix() macro which does it correctly.
Debugged by Kees Cook <keescook@chromium.org>.
[ bp: Massage commit message. ]
Fixes: 25189d08e5 ("x86/sev-es: Add support for handling IOIO exceptions")
Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/160697106089.3146288.2052422845039649176.stgit@devnote2
Since insn.prefixes.nbytes can be bigger than the size of
insn.prefixes.bytes[] when a prefix is repeated, the proper check must
be
insn.prefixes.bytes[i] != 0 and i < 4
instead of using insn.prefixes.nbytes. Use the new
for_each_insn_prefix() macro which does it correctly.
Debugged by Kees Cook <keescook@chromium.org>.
[ bp: Massage commit message. ]
Fixes: 32d0b95300 ("x86/insn-eval: Add utility functions to get segment selector")
Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/160697104969.3146288.16329307586428270032.stgit@devnote2
Since insn.prefixes.nbytes can be bigger than the size of
insn.prefixes.bytes[] when a prefix is repeated, the proper check must
be
insn.prefixes.bytes[i] != 0 and i < 4
instead of using insn.prefixes.nbytes.
Introduce a for_each_insn_prefix() macro for this purpose. Debugged by
Kees Cook <keescook@chromium.org>.
[ bp: Massage commit message, sync with the respective header in tools/
and drop "we". ]
Fixes: 2b14449835 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints")
Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/160697103739.3146288.7437620795200799020.stgit@devnote2
Pull input fixes from Dmitry Torokhov:
"A fix for 'RETRIGEN' handling in Atmel touch controllers that was
causing lost interrupts on systems using edge-triggered interrupts, a
quirk for i8042 driver, and a couple more fixes."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: atmel_mxt_ts - fix lost interrupts
Input: xpad - support Ardwiino Controllers
Input: i8042 - add ByteSpeed touchpad to noloop table
Input: i8042 - fix error return code in i8042_setup_aux()
Input: soc_button_array - add missing include
Pull i2c fixes from Wolfram Sang:
"Some more I2C driver updates. IMX updates are a tad bigger, but not
exceptionally big"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mlxbf: Fix the return check of devm_ioremap and ioremap
i2c: mlxbf: select CONFIG_I2C_SLAVE
i2c: imx: Don't generate STOP condition if arbitration has been lost
i2c: imx: Check for I2SR_IAL after every byte
i2c: imx: Fix reset of I2SR_IAL flag
i2c: qcom: Fix IRQ error misassignement
i2c: qup: Fix error return code in qup_i2c_bam_schedule_desc()
-----BEGIN PGP SIGNATURE-----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=o4GN
-----END PGP SIGNATURE-----
Merge tag 'block-5.10-2020-12-05' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Single fix for an issue with chunk_sectors and stacked devices"
* tag 'block-5.10-2020-12-05' of git://git.kernel.dk/linux-block:
block: use gcd() to fix chunk_sectors limit stacking
-----BEGIN PGP SIGNATURE-----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=CPrM
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.10-2020-12-05' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"Just a small fix this time, for an issue with 32-bit compat apps and
buffer selection with recvmsg"
* tag 'io_uring-5.10-2020-12-05' of git://git.kernel.dk/linux-block:
io_uring: fix recvmsg setup with compat buf-select
Three commits fixing possible missed TLB invalidations for multi-threaded
processes when CPUs are hotplugged in and out.
A fix for a host crash triggerable by host userspace (qemu) in KVM on Power9.
A fix for a host crash in machine check handling when running HPT guests on a
HPT host.
One commit fixing potential missed TLB invalidations when using the hash MMU on
Power9 or later.
A regression fix for machines with CPUs on node 0 but no memory.
Thanks to:
Aneesh Kumar K.V, Cédric Le Goater, Greg Kurz, Milan Mohanty, Milton Miller,
Nicholas Piggin, Paul Mackerras, Srikar Dronamraju.
-----BEGIN PGP SIGNATURE-----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=tIAZ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.10:
- Three commits fixing possible missed TLB invalidations for
multi-threaded processes when CPUs are hotplugged in and out.
- A fix for a host crash triggerable by host userspace (qemu) in KVM
on Power9.
- A fix for a host crash in machine check handling when running HPT
guests on a HPT host.
- One commit fixing potential missed TLB invalidations when using the
hash MMU on Power9 or later.
- A regression fix for machines with CPUs on node 0 but no memory.
Thanks to Aneesh Kumar K.V, Cédric Le Goater, Greg Kurz, Milan
Mohanty, Milton Miller, Nicholas Piggin, Paul Mackerras, and Srikar
Dronamraju"
* tag 'powerpc-5.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/powernv: Fix memory corruption when saving SLB entries on MCE
KVM: PPC: Book3S HV: XIVE: Fix vCPU id sanity check
powerpc/numa: Fix a regression on memoryless node 0
powerpc/64s: Trim offlined CPUs from mm_cpumasks
kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling
powerpc/64s/pseries: Fix hash tlbiel_all_isa300 for guest kernels
powerpc/64s: Fix hash ISA v3.0 TLBIEL instruction generation
-----BEGIN PGP SIGNATURE-----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=3b+C
-----END PGP SIGNATURE-----
Merge tag '5.10-rc6-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three smb3 fixes (two for stable) fixing
- a null pointer issue in a DFS error path
- a problem with excessive padding when mounted with "idsfromsid"
causing owner fields to get corrupted
- a more recent problem with compounded reparse point query found in
testing to the Linux kernel server"
* tag '5.10-rc6-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: refactor create_sd_buf() and and avoid corrupting the buffer
cifs: add NULL check for ses->tcon_ipc
smb3: set COMPOUND_FID to FileID field of subsequent compound request
Four small fixes in two drivers. The mpt3sas fixes are all timeout
under unusual conditions problems and the storvsc is a missed incoming
packet validation and a missed error return.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX8vDDSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishTRAAP9BAWjp
kqf2tL9RdIG77IGUxWjHBEa2G2kaFyGli4+z6AEA15WwxaNMTgOg2ldKOOuCYB5i
93+bClqG7BKs7LMHlUs=
=Cdhq
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four small fixes in two drivers.
The mpt3sas fixes are all problems with timeout under unusual
conditions, and the storvsc is a missed incoming packet validation
and a missed error return"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Increase IOCInit request timeout to 30s
scsi: mpt3sas: Fix ioctl timeout
scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()
scsi: storvsc: Fix error return in storvsc_probe()
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl/KwFgTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWlN+CAC0H96QVQTS5+osg3FOaBMO/whp3Wgw
AA/W8g/TyzW41CnuSRr/B90p+XOYdn7xyt3YjsI1KDUuwMzeMncVq/rLZBdJmsyk
q1ra+zkz430W6oE3+xr7By50RGVHH1c1fbhpaS+Jb2xRYqPmjneHk/aHt7SH2DAX
HhViT6GW0k7rg+NrwZCw9sjOC4/dSz63i0wQAuvM06DK4hLzY54CwV5cQwCnUzA8
ZK6N69cayP/6A0L6RyEKbH3E9YbT0lrD3+Q6VtSYVn/8Dcftx9McyFEckqEOWq0a
3XywXhFbc9L8WhM6XxmobxXlIg/HlhhY9MjHMGu76LthhpLe0YAp0Yyh
=RnxG
-----END PGP SIGNATURE-----
Merge tag 'for-5.10/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull fix for device mapper fixes from Mike Snitzer:
"Apologies for the glaring bug I introduced with my previous pull
request!
Fix incorrect branching at top of blk_max_size_offset()"
* tag 'for-5.10/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
block: fix incorrect branching in blk_max_size_offset()
devm_ioremap and ioremap may return NULL which cannot be checked
by IS_ERR.
Signed-off-by: Wang Xiaojun <wangxiaojun11@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
If this is not enabled, the interfaces used in this driver do not work:
drivers/i2c/busses/i2c-mlxbf.c:1888:3: error: implicit declaration of function 'i2c_slave_event' [-Werror,-Wimplicit-function-declaration]
i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
^
drivers/i2c/busses/i2c-mlxbf.c:1888:26: error: use of undeclared identifier 'I2C_SLAVE_WRITE_REQUESTED'
i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
^
drivers/i2c/busses/i2c-mlxbf.c:1890:32: error: use of undeclared identifier 'I2C_SLAVE_WRITE_RECEIVED'
ret = i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED,
^
drivers/i2c/busses/i2c-mlxbf.c:1892:26: error: use of undeclared identifier 'I2C_SLAVE_STOP'
i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
^
Fixes: b5b5b32081 ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
If non-zero 'chunk_sectors' is passed in to blk_max_size_offset() that
override will be incorrectly ignored.
Old blk_max_size_offset() branching, prior to commit 3ee16db390,
must be used only if passed 'chunk_sectors' override is zero.
Fixes: 3ee16db390 ("dm: fix IO splitting")
Cc: stable@vger.kernel.org # 5.9
Reported-by: John Dorminy <jdorminy@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Restores splitting in terms of varied per-target ti->max_io_len
rather than use block core's single stacked 'chunk_sectors' limit.
- Like DM crypt, update DM integrity to not use crypto drivers that
have CRYPTO_ALG_ALLOCATES_MEMORY set.
- Fix DM writecache target's argument parsing and status display.
- Remove needless BUG() from dm writecache's persistent_memory_claim()
- Remove old gcc workaround in DM cache target's block_div() for ARM
link errors now that gcc >= 4.9 is required.
- Fix RCU locking in dm_blk_report_zones and dm_dax_zero_page_range.
- Remove old, and now frowned upon, BUG_ON(in_interrupt()) in
dm_table_event().
- Remove invalid sparse annotations from dm_prepare_ioctl() and
dm_unprepare_ioctl().
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl/KonYTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWgSJCACNYEndubrROJZL+FOUQixzZQiOfphw
9Brb/XbdXWXIv7F+JV85E6olOqz7JjTGrO91uD5kwHEtVhDx5zT/GCm+5FoBrLa/
FuTphPRWNimZSU1umJe2AG9hOiDpPJJUe/wwj3QkBH2TeEHwBHblB8BkRFzxnP+p
0dGybrQBMtrH3GO65YG7qaASeBPl1+G3mVHfzViyhk1uoZL1y9pKbzPK60TkHcsa
VCGTPke5Ri3hvd85hmpDcXmyxjxZfCA8Jc/DrQ+DDEwakHoJFwlSzP7fqwHnpKHT
RDL4iOID54SViSGqzNcxlGtr/EHyN9Mom2d4Nnb0cgsRG4woCeJWJZMM
=+o1m
-----END PGP SIGNATURE-----
Merge tag 'for-5.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM's bio splitting changes that were made during v5.9. This
restores splitting in terms of varied per-target ti->max_io_len
rather than use block core's single stacked 'chunk_sectors' limit.
- Like DM crypt, update DM integrity to not use crypto drivers that
have CRYPTO_ALG_ALLOCATES_MEMORY set.
- Fix DM writecache target's argument parsing and status display.
- Remove needless BUG() from dm writecache's persistent_memory_claim()
- Remove old gcc workaround in DM cache target's block_div() for ARM
link errors now that gcc >= 4.9 is required.
- Fix RCU locking in dm_blk_report_zones and dm_dax_zero_page_range.
- Remove old, and now frowned upon, BUG_ON(in_interrupt()) in
dm_table_event().
- Remove invalid sparse annotations from dm_prepare_ioctl() and
dm_unprepare_ioctl().
* tag 'for-5.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: remove invalid sparse __acquires and __releases annotations
dm: fix double RCU unlock in dm_dax_zero_page_range() error path
dm: fix IO splitting
dm writecache: remove BUG() and fail gracefully instead
dm table: Remove BUG_ON(in_interrupt())
dm: fix bug with RCU locking in dm_blk_report_zones
Revert "dm cache: fix arm link errors with inline"
dm writecache: fix the maximum number of arguments
dm writecache: advance the number of arguments when reporting max_age
dm integrity: don't use drivers that have CRYPTO_ALG_ALLOCATES_MEMORY
Fixes sparse warnings:
drivers/md/dm.c:508:12: warning: context imbalance in 'dm_prepare_ioctl' - wrong count at exit
drivers/md/dm.c:543:13: warning: context imbalance in 'dm_unprepare_ioctl' - wrong count at exit
Fixes: 971888c469 ("dm: hold DM table for duration of ioctl rather than use blkdev_get")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Goldwyn Rodrigues