Pull initial set_fs() removal from Al Viro:
"Christoph's set_fs base series + fixups"
* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Allow a NULL pos pointer to __kernel_read
fs: Allow a NULL pos pointer to __kernel_write
powerpc: remove address space overrides using set_fs()
powerpc: use non-set_fs based maccess routines
x86: remove address space overrides using set_fs()
x86: make TASK_SIZE_MAX usable from assembly code
x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h
lkdtm: remove set_fs-based tests
test_bitmap: remove user bitmap tests
uaccess: add infrastructure for kernel builds with set_fs()
fs: don't allow splice read/write without explicit ops
fs: don't allow kernel reads and writes without iter ops
sysctl: Convert to iter interfaces
proc: add a read_iter method to proc proc_ops
proc: cleanup the compat vs no compat file ops
proc: remove a level of indentation in proc_get_inode
Pull i2c updates from Wolfram Sang:
- if a host can be a client, too, the I2C core can now use it to
emulate SMBus HostNotify support (STM32 and R-Car added this so far)
- also for client mode, a testunit has been added. It can create rare
situations on the bus, so host controllers can be tested
- a binding has been added to mark the bus as "single-master". This
allows for better timeout detections
- new driver for Mellanox Bluefield
- massive refactoring of the Tegra driver
- EEPROMs recognized by the at24 driver can now have custom names
- rest is driver updates
* 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (80 commits)
Documentation: i2c: add testunit docs to index
i2c: tegra: Improve driver module description
i2c: tegra: Clean up whitespaces, newlines and indentation
i2c: tegra: Clean up and improve comments
i2c: tegra: Clean up printk messages
i2c: tegra: Clean up variable names
i2c: tegra: Improve formatting of variables
i2c: tegra: Check errors for both positive and negative values
i2c: tegra: Factor out hardware initialization into separate function
i2c: tegra: Factor out register polling into separate function
i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg()
i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg()
i2c: tegra: Rename wait/poll functions
i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg()
i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear()
i2c: tegra: Remove likely/unlikely from the code
i2c: tegra: Remove outdated barrier()
i2c: tegra: Clean up variable types
i2c: tegra: Reorder location of functions in the code
i2c: tegra: Clean up probe function
...
- Document R8A774A1, R8A774B1, R8A774E1 endpoint support in DT (Lad
Prabhakar)
- Add R8A774A1, R8A774B1, R8A774E1 (RZ/G2M, RZ/G2N, RZ/G2H) IDs to endpoint
test (Lad Prabhakar)
- Add device tree support for R8A7742 (Lad Prabhakar)
- Use "fallthrough" pseudo-keyword (Gustavo A. R. Silva)
* remotes/lorenzo/pci/rcar:
dt-bindings: PCI: rcar: Add device tree support for r8a7742
PCI: rcar-gen2: Use fallthrough pseudo-keyword
misc: pci_endpoint_test: Add Device ID for RZ/G2H PCIe controller
dt-bindings: pci: rcar-pci-ep: Document r8a774e1
misc: pci_endpoint_test: Add Device ID for RZ/G2M and RZ/G2N PCIe controllers
dt-bindings: pci: rcar-pci-ep: Document r8a774a1 and r8a774b1
- A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting it for
powerpc, as well as a related fix for sparc.
- Remove support for PowerPC 601.
- Some fixes for watchpoints & addition of a new ptrace flag for detecting ISA
v3.1 (Power10) watchpoint features.
- A fix for kernels using 4K pages and the hash MMU on bare metal Power9
systems with > 16TB of RAM, or RAM on the 2nd node.
- A basic idle driver for shallow stop states on Power10.
- Tweaks to our sched domains code to better inform the scheduler about the
hardware topology on Power9/10, where two SMT4 cores can be presented by
firmware as an SMT8 core.
- A series doing further reworks & cleanups of our EEH code.
- Addition of a filter for RTAS (firmware) calls done via sys_rtas(), to
prevent root from overwriting kernel memory.
- Other smaller features, fixes & cleanups.
Thanks to:
Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Athira Rajeev, Biwen
Li, Cameron Berkenpas, Cédric Le Goater, Christophe Leroy, Christoph Hellwig,
Colin Ian King, Daniel Axtens, David Dai, Finn Thain, Frederic Barrat, Gautham
R. Shenoy, Greg Kurz, Gustavo Romero, Ira Weiny, Jason Yan, Joel Stanley,
Jordan Niethe, Kajol Jain, Konrad Rzeszutek Wilk, Laurent Dufour, Leonardo
Bras, Liu Shixin, Luca Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar,
Nathan Lynch, Nicholas Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver
O'Halloran, Pedro Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai,
Qinglang Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott
Cheloha, Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
Yingliang, zhengbin.
-----BEGIN PGP SIGNATURE-----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=akeX
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting
it for powerpc, as well as a related fix for sparc.
- Remove support for PowerPC 601.
- Some fixes for watchpoints & addition of a new ptrace flag for
detecting ISA v3.1 (Power10) watchpoint features.
- A fix for kernels using 4K pages and the hash MMU on bare metal
Power9 systems with > 16TB of RAM, or RAM on the 2nd node.
- A basic idle driver for shallow stop states on Power10.
- Tweaks to our sched domains code to better inform the scheduler about
the hardware topology on Power9/10, where two SMT4 cores can be
presented by firmware as an SMT8 core.
- A series doing further reworks & cleanups of our EEH code.
- Addition of a filter for RTAS (firmware) calls done via sys_rtas(),
to prevent root from overwriting kernel memory.
- Other smaller features, fixes & cleanups.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
Athira Rajeev, Biwen Li, Cameron Berkenpas, Cédric Le Goater, Christophe
Leroy, Christoph Hellwig, Colin Ian King, Daniel Axtens, David Dai, Finn
Thain, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Gustavo Romero,
Ira Weiny, Jason Yan, Joel Stanley, Jordan Niethe, Kajol Jain, Konrad
Rzeszutek Wilk, Laurent Dufour, Leonardo Bras, Liu Shixin, Luca
Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar, Nathan Lynch, Nicholas
Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Pedro
Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai, Qinglang
Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott Cheloha,
Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
Yingliang, zhengbin.
* tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (228 commits)
Revert "powerpc/pci: unmap legacy INTx interrupts when a PHB is removed"
selftests/powerpc: Fix eeh-basic.sh exit codes
cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier
powerpc/time: Make get_tb() common to PPC32 and PPC64
powerpc/time: Make get_tbl() common to PPC32 and PPC64
powerpc/time: Remove get_tbu()
powerpc/time: Avoid using get_tbl() and get_tbu() internally
powerpc/time: Make mftb() common to PPC32 and PPC64
powerpc/time: Rename mftbl() to mftb()
powerpc/32s: Remove #ifdef CONFIG_PPC_BOOK3S_32 in head_book3s_32.S
powerpc/32s: Rename head_32.S to head_book3s_32.S
powerpc/32s: Setup the early hash table at all time.
powerpc/time: Remove ifdef in get_dec() and set_dec()
powerpc: Remove get_tb_or_rtc()
powerpc: Remove __USE_RTC()
powerpc: Tidy up a bit after removal of PowerPC 601.
powerpc: Remove support for PowerPC 601
powerpc: Remove PowerPC 601
powerpc: Drop SYNC_601() ISYNC_601() and SYNC()
powerpc: Remove CONFIG_PPC601_SYNC_FIX
...
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common
code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
-----BEGIN PGP SIGNATURE-----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=Bkf/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
Here is the big set of char, misc, and other assorted driver subsystem
patches for 5.10-rc1.
There's a lot of different things in here, all over the drivers/
directory. Some summaries:
- soundwire driver updates
- habanalabs driver updates
- extcon driver updates
- nitro_enclaves new driver
- fsl-mc driver and core updates
- mhi core and bus updates
- nvmem driver updates
- eeprom driver updates
- binder driver updates and fixes
- vbox minor bugfixes
- fsi driver updates
- w1 driver updates
- coresight driver updates
- interconnect driver updates
- misc driver updates
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4g8YQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yngKgCeNpArCP/9vQJRK9upnDm8ZLunSCUAn1wUT/2A
/bTQ42c/WRQ+LU828GSM
=6sO2
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char, misc, and other assorted driver subsystem
patches for 5.10-rc1.
There's a lot of different things in here, all over the drivers/
directory. Some summaries:
- soundwire driver updates
- habanalabs driver updates
- extcon driver updates
- nitro_enclaves new driver
- fsl-mc driver and core updates
- mhi core and bus updates
- nvmem driver updates
- eeprom driver updates
- binder driver updates and fixes
- vbox minor bugfixes
- fsi driver updates
- w1 driver updates
- coresight driver updates
- interconnect driver updates
- misc driver updates
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits)
binder: fix UAF when releasing todo list
docs: w1: w1_therm: Fix broken xref, mistakes, clarify text
misc: Kconfig: fix a HISI_HIKEY_USB dependency
LSM: Fix type of id parameter in kernel_post_load_data prototype
misc: Kconfig: add a new dependency for HISI_HIKEY_USB
firmware_loader: fix a kernel-doc markup
w1: w1_therm: make w1_poll_completion static
binder: simplify the return expression of binder_mmap
test_firmware: Test partial read support
firmware: Add request_partial_firmware_into_buf()
firmware: Store opt_flags in fw_priv
fs/kernel_file_read: Add "offset" arg for partial reads
IMA: Add support for file reads without contents
LSM: Add "contents" flag to kernel_read_file hook
module: Call security_kernel_post_load_data()
firmware_loader: Use security_post_load_data()
LSM: Introduce kernel_post_load_data() hook
fs/kernel_read_file: Add file_size output argument
fs/kernel_read_file: Switch buffer size arg to size_t
fs/kernel_read_file: Remove redundant size argument
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXz5bNAAKCRCRxhvAZXjc
opfjAP9R/J72yxdd2CLGNZ96hyiRX1NgFDOVUhscOvujYJf8ZwD+OoLmKMvAyFW6
hnMhT1n9Q+aq194hyzChOLQaBTejBQ8=
=4WCX
-----END PGP SIGNATURE-----
Merge tag 'kernel-clone-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull kernel_clone() updates from Christian Brauner:
"During the v5.9 merge window we reworked the process creation
codepaths across multiple architectures. After this work we were only
left with the _do_fork() helper based on the struct kernel_clone_args
calling convention. As was pointed out _do_fork() isn't valid
kernelese especially for a helper that isn't just static.
This series removes the _do_fork() helper and introduces the new
kernel_clone() helper. The process creation cleanup didn't change the
name to something more reasonable mainly because _do_fork() was used
in quite a few places. So sending this as a separate series seemed the
better strategy.
I originally intended to send this early in the v5.9 development cycle
after the merge window had closed but given that this was touching
quite a few places I decided to defer this until the v5.10 merge
window"
* tag 'kernel-clone-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
sched: remove _do_fork()
tracing: switch to kernel_clone()
kgdbts: switch to kernel_clone()
kprobes: switch to kernel_clone()
x86: switch to kernel_clone()
sparc: switch to kernel_clone()
nios2: switch to kernel_clone()
m68k: switch to kernel_clone()
ia64: switch to kernel_clone()
h8300: switch to kernel_clone()
fork: introduce kernel_clone()
devices which doesn't need pinning of pages for DMA anymore. Add support
for the command submission to devices using new x86 instructions like
ENQCMD{,S} and MOVDIR64B. In addition, add support for process address
space identifiers (PASIDs) which are referenced by those command
submission instructions along with the handling of the PASID state on
context switch as another extended state. Work by Fenghua Yu, Ashok Raj,
Yu-cheng Yu and Dave Jiang.
-----BEGIN PGP SIGNATURE-----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=K9X4
-----END PGP SIGNATURE-----
Merge tag 'x86_pasid_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PASID updates from Borislav Petkov:
"Initial support for sharing virtual addresses between the CPU and
devices which doesn't need pinning of pages for DMA anymore.
Add support for the command submission to devices using new x86
instructions like ENQCMD{,S} and MOVDIR64B. In addition, add support
for process address space identifiers (PASIDs) which are referenced by
those command submission instructions along with the handling of the
PASID state on context switch as another extended state.
Work by Fenghua Yu, Ashok Raj, Yu-cheng Yu and Dave Jiang"
* tag 'x86_pasid_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Add an enqcmds() wrapper for the ENQCMDS instruction
x86/asm: Carve out a generic movdir64b() helper for general usage
x86/mmu: Allocate/free a PASID
x86/cpufeatures: Mark ENQCMD as disabled when configured out
mm: Add a pasid member to struct mm_struct
x86/msr-index: Define an IA32_PASID MSR
x86/fpu/xstate: Add supervisor PASID state for ENQCMD
x86/cpufeatures: Enumerate ENQCMD and ENQCMDS instructions
Documentation/x86: Add documentation for SVA (Shared Virtual Addressing)
iommu/vt-d: Change flags type to unsigned int in binding mm
drm, iommu: Change type of pasid to u32
The dependency should be just USB_ROLE_SWITCH, instead
of CONFIG_USB_ROLE_SWITCH.
Fixes: 2827d98bc5 ("misc: Kconfig: add a new dependency for HISI_HIKEY_USB")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/0b6dff854c4bb412c2c11f17803e84d61385415f.1602138248.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As warned by Randy:
on x86_64:
CONFIG_USB_ROLE_SWITCH=m
and HISI_HIKEY_USB=y.
ld: drivers/misc/hisi_hikey_usb.o: in function `hisi_hikey_usb_remove':
hisi_hikey_usb.c:(.text+0x61): undefined reference to `usb_role_switch_unregister'
ld: hisi_hikey_usb.c:(.text+0xa4): undefined reference to `usb_role_switch_put'
ld: drivers/misc/hisi_hikey_usb.o: in function `hub_usb_role_switch_set':
hisi_hikey_usb.c:(.text+0xd3): undefined reference to `usb_role_switch_get_drvdata'
ld: drivers/misc/hisi_hikey_usb.o: in function `relay_set_role_switch':
hisi_hikey_usb.c:(.text+0x54d): undefined reference to `usb_role_switch_set_role'
ld: drivers/misc/hisi_hikey_usb.o: in function `hisi_hikey_usb_probe':
hisi_hikey_usb.c:(.text+0x8a5): undefined reference to `usb_role_switch_get'
ld: hisi_hikey_usb.c:(.text+0xa08): undefined reference to `usb_role_switch_register'
ld: hisi_hikey_usb.c:(.text+0xa6e): undefined reference to `usb_role_switch_put'
Make it dependent on CONFIG_USB_ROLE_SWITCH.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/0e49432d0db9ee8429a9923a1d995935b6b83552.1602047370.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update UV MMRs in uv_mmrs.h for UV5 based on Verilog output from the
UV Hub hardware design files. This is the next UV architecture with
a new class (UVY) being defined for 52 bit physical address masks.
Uses a bitmask for UV arch identification so a single test can cover
multiple versions. Includes other adjustments to match the uv_mmrs.h
file to keep from encountering compile errors. New UV5 functionality
is added in the patches that follow.
[ Fix W=1 build warnings. ]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lkml.kernel.org/r/20201005203929.148656-5-mike.travis@hpe.com
Remove the define is_uv() is_uv_system and just use the latter as is.
This removes a conflict with a new symbol in the generated uv_mmrs.h
file (is_uv()).
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lkml.kernel.org/r/20201005203929.148656-4-mike.travis@hpe.com
Split out all the bits that are purely for dma_map_ops implementations
and related code into a new <linux/dma-map-ops.h> header so that they
don't get pulled into all the drivers. That also means the architecture
specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h>
any more, which leads to a missing includes that were pulled in by the
x86 or arm versions in a few not overly portable drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Read and write io memory should address align on ARCH ARM. Change to use
memcpy_toio to avoid kernel panic caused by the address un-align issue.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20200929091106.24624-5-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since struct _mic_vring_info and vring are allocated together and follow
vring, if the vring_size() is not four bytes aligned, which will cause
the start address of struct _mic_vring_info is not four byte aligned.
For example, when vring entries is 128, the vring_size() will be 5126
bytes. The _mic_vring_info struct layout in ddr looks like:
0x90002400: 00000000 00390000 EE010000 0000C0FF
Here 0x39 is the avail_idx member, and 0xC0FFEE01 is the magic member.
When EP use ioread32(magic) to reads the magic in RC's share memory, it
will cause kernel panic on ARM64 platform due to the cross-byte io read.
Here read magic in user space use le32toh(vr0->info->magic) will meet
the same issue.
So add round_up(x,4) for vring_size, then the struct _mic_vring_info
will store in this way:
0x90002400: 00000000 00000000 00000039 C0FFEE01
Which will avoid kernel panic when read magic in struct _mic_vring_info.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20200929091106.24624-4-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set VIRTIO_F_ACCESS_PLATFORM feature for vop driver, as the DMA mapping
details shouldn't decide on the virtio implementation, but the host PCIe
implementation.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20200929084944.24146-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When OCXL is enabled and HOTPLUG_PCI is disabled, it results in the
following Kbuild warning:
WARNING: unmet direct dependencies detected for HOTPLUG_PCI_POWERNV
Depends on [n]: PCI [=y] && HOTPLUG_PCI [=n] && PPC_POWERNV [=y] && EEH [=y]
Selected by [y]:
- OCXL [=y] && PPC_POWERNV [=y] && PCI [=y] && EEH [=y]
The reason is that OCXL selects HOTPLUG_PCI_POWERNV without depending on
or selecting HOTPLUG_PCI while HOTPLUG_PCI_POWERNV is subordinate to
HOTPLUG_PCI.
HOTPLUG_PCI_POWERNV is a visible symbol with a set of dependencies.
Selecting it will lead to overlooking its other dependencies as well.
Let OCXL depend on HOTPLUG_PCI_POWERNV instead to avoid Kbuild issues.
Fixes: 49ce94b867 ("ocxl: Add PCI hotplug dependency to Kconfig")
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Link: https://lore.kernel.org/r/20200918094148.20525-1-fazilyildiran@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sg_init_table zeroes its first argument, so the allocation of that argument
doesn't have to.
the semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,n,flags;
@@
x =
- kcalloc
+ kmalloc_array
(n,sizeof(struct scatterlist),flags)
...
sg_init_table(x,n)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1600601186-7420-14-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- add support for masking sensitive data in VAIO EEPROMs
- set the nvmem TYPE to NVMEM_TYPE_EEPROM
- add support for the new 'label' property
- set the nvmem ID to NVMEM_DEVID_AUTO by default (for backward
compatibility) or to NVMEM_DEVID_NONE if label is defined
-----BEGIN PGP SIGNATURE-----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=KexW
-----END PGP SIGNATURE-----
Merge tag 'at24-updates-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-5.10
at24 updates for v5.10
- add support for masking sensitive data in VAIO EEPROMs
- set the nvmem TYPE to NVMEM_TYPE_EEPROM
- add support for the new 'label' property
- set the nvmem ID to NVMEM_DEVID_AUTO by default (for backward
compatibility) or to NVMEM_DEVID_NONE if label is defined
By using the label property, a more descriptive name can be populated
for AT24 EEPROMs NVMEM device. Update the AT24 driver to check to see
if the label property is present and if so, use this as the name for
NVMEM device. Please note that when the 'label' property is present for
the AT24 EEPROM, we do not want the NVMEM driver to append the 'devid'
to the name and so the nvmem_config.id is initialised to
NVMEM_DEVID_NONE.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
LDMA registers are configured with a fixed value.
We add new define set which gives the configuration
a proper meaning.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The device should be idle after a context is closed. If not, print a
notice.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
During debugging of error we sometimes need to know whether the error
happened when a user context was open. Add debug prints when opening and
closing user contexts.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Some engines use resources that belong to the kernel context (e.g. MMU
mappings). In case the halt-engines doesn't work properly due to H/W
restriction, we need to make sure the kernel context lives on until after
the hw_fini. The hw_fini resets the ASIC after that no engine is alive and
we can safely close the kernel context.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
We don't try to allocate huge pages here so remove the huge word.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The AT24 EEPROM driver does not initialise the 'id' field of the
nvmem_config structure and because the entire structure is not
initialised, it ends up with a random value. This causes the NVMEM
driver to append the device 'devid' value to name of the NVMEM
device. Ideally for I2C devices such as the AT24 that already have a
unique name, we would not bother to append the 'devid'. However, given
that this has always been done for AT24 devices, we cannot remove the
'devid' as this will change the name of the userspace sysfs node for
the NVMEM device. Nonetheless we should ensure that the 'id' field of
the nvmem_config structure is initialised so that there is no chance of
a random value causes problems in the future. Therefore, set the NVMEM
config.id to NVMEM_DEVID_AUTO for AT24 EEPROMs so that the 'devid' is
always appended.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The commit 0a121f9bc3 ("misc: pci_endpoint_test: Use streaming DMA
APIs for buffer allocation") changed to use streaming DMA APIs, however,
dma_map_single() might not return a 4KB aligned address, so add the
default_data as driver data for Layerscape PCIe controllers to make it
4KB aligned.
Link: https://lore.kernel.org/r/20200918080024.13639-13-Zhiqiang.Hou@nxp.com
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Add LS1088a in pci_device_id table so that pci-epf-test can be used
for testing PCIe EP in LS1088a.
Link: https://lore.kernel.org/r/20200918080024.13639-12-Zhiqiang.Hou@nxp.com
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
This return statement is indented one tab too far.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200918143405.GF909725@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Inside __scif_pin_pages(), when map_flags != SCIF_MAP_KERNEL it
will call pin_user_pages_fast() to map nr_pages. However,
pin_user_pages_fast() might fail with a return value -ERRNO.
The return value is stored in pinned_pages->nr_pages. which in
turn is passed to unpin_user_pages(), which expects
pinned_pages->nr_pages >=0, else disaster.
Fix this by assigning pinned_pages->nr_pages to 0 if
pin_user_pages_fast() returns -ERRNO.
Fixes: ba612aa8b4 ("misc: mic: SCIF memory registration and unregistration")
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Link: https://lore.kernel.org/r/1600570295-29546-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make use of devm_platform_ioremap_resource() provided by driver
core platform instead of duplicated analogue.
Acked-by: Arnd Bergmann <arn@arndb.de>
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20200918083634.33124-1-bobo.shaobowang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Our firmware use some scratchpad registers in the device for different
roles. Update the file to the latest version of the firmware code.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Future F/W versions will have enhanced security measures and the driver
won't be able to do certain configurations that it always did and those
configurations will be done by the firmware.
We use the firmware's preboot version to determine whether security
measures are enabled or not. Because we need this very early in our code,
the read of the preboot version is moved to the earliest possible place,
right after the device's PCI initialization.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This is a workaround for H/W bug H3-2116, where if there are more than 16
outstanding completions in the DMA transpose engine, there can be a
deadlock in the engine.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add new packet to fetch PLL information from firmware. This will be needed
in the future when the driver won't be able to access the PLL registers
directly
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
There are cases in which the device should access the host memory of a
CB through the device MMU, and thus this memory should be mapped.
The patch adds a flag to the CB IOCTL, in which a user can ask the
driver to perform the mapping when creating a CB.
The mapping is allowed only if a dedicated VA range was allocated for
the specific ASIC.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Future changes require using a context while handling a command buffer,
and thus need to save the context in the command buffer object.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Now that the driver no longer uses dma_buf, we can remove the select of
DMA_SHARED_BUFFER from kconfig.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The user sometimes wants to check if a CS has completed to clean resources.
In that case, the user doesn't want to sleep but just to check if the CS
has finished and continue with his code.
Add a new definition to the API of the wait on CS. The new definition says
that if the timeout is 0, the driver won't sleep at all but return
immediately after checking if the CS has finished.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The firmware running in the boot stage takes more time to execute due to
increased security mechanisms. Therefore, we need to increase the timeout
we wait for the boot fit to finish loading.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This commit modify the existing debugfs code to support future devices that
have a 6 HOPs MMU implementation instead of 5 HOPs implementation.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This commit adds the number of HOPs supported by the device to the
device MMU properties.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Linus Torvalds