Commit Graph

585 Commits

Author SHA1 Message Date
Jarkko Nikula e4330d8bf6 ACPI / scan: Fix enumeration for special SPI and I2C devices
Commit f406270bf7 ("ACPI / scan: Set the visited flag for all
enumerated devices") caused that two group of special SPI or I2C
devices do not enumerate. SPI and I2C devices are expected to be
enumerated by the SPI and I2C subsystems but change caused that
acpi_bus_attach() marks those devices with acpi_device_set_enumerated().

First group of devices are matched using Device Tree compatible property
with special _HID "PRP0001". Those devices have matched scan handler,
acpi_scan_attach_handler() retuns 1 and acpi_bus_attach() marks them
with acpi_device_set_enumerated().

Second group of devices without valid _HID such as "LNXVIDEO" have
device->pnp.type.platform_id set to zero and change again marks them
with acpi_device_set_enumerated().

Fix this by flagging the SPI and I2C devices during struct acpi_device
object initialization time and let the code in acpi_bus_attach() to go
through the device_attach() and acpi_default_enumeration() path for all
SPI and I2C devices.

Fixes: f406270bf7 (ACPI / scan: Set the visited flag for all enumerated devices)
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: 4.11+ <stable@vger.kernel.org> # 4.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-21 23:14:55 +02:00
Sricharan R 058f8c3fb4 ACPI/IORT: Ignore all errors except EPROBE_DEFER
While deferring the probe of IOMMU masters, xlate and
add_device callbacks called from iort_iommu_configure
can pass back error values like -ENODEV, which means
the IOMMU cannot be connected with that master for real
reasons. Before the IOMMU probe deferral, all such errors
were ignored. Now all those errors are propagated back,
killing the master's probe for such errors. Instead ignore
all the errors except EPROBE_DEFER, which is the only one
of concern and let the master work without IOMMU, thus
restoring the old behavior. Also make explicit that
acpi_dma_configure handles only -EPROBE_DEFER from
iort_iommu_configure.

Fixes: 5a1bb638d5 ("drivers: acpi: Handle IOMMU lookup failure with deferred probing or error")
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-05-30 11:31:32 +02:00
Linus Torvalds 28b47809b2 IOMMU Updates for Linux v4.12
This includes:
 
 	* Some code optimizations for the Intel VT-d driver
 
 	* Code to switch off a previously enabled Intel IOMMU
 
 	* Support for 'struct iommu_device' for OMAP, Rockchip and
 	  Mediatek IOMMUs
 
 	* Some header optimizations for IOMMU core code headers and a
 	  few fixes that became necessary in other parts of the kernel
 	  because of that
 
 	* ACPI/IORT updates and fixes
 
 	* Some Exynos IOMMU optimizations
 
 	* Code updates for the IOMMU dma-api code to bring it closer to
 	  use per-cpu iova caches
 
 	* New command-line option to set default domain type allocated
 	  by the iommu core code
 
 	* Another command line option to allow the Intel IOMMU switched
 	  off in a tboot environment
 
 	* ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using
 	  an IDENTITY domain in conjunction with DMA ops, Support for
 	  SMR masking, Support for 16-bit ASIDs (was previously broken)
 
 	* Various other small fixes and improvements
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZEY4XAAoJECvwRC2XARrjth0QAKV56zjnFclv39aDo6eCq9CT
 51+XT4bPY5VKQ2+Jx76TBNObHmGK+8KEMHfT9khpWJtFCDyy25SGckLry1nYqmZs
 tSTsbj4sOeCyKzOLITlRN9/OzKXkjKAxYuq+sQZZFDFYf3kCM/eag0dGAU6aVLNp
 tkIal3CSpGjCQ9M5JohrtQ1mwiGqCIkMIgvnBjRw+bfpLnQNG+VL6VU2G3RAkV2b
 5Vbdoy+P7ZQnJSZr/bibYL2BaQs2diR4gOppT5YbsfniMq4QYSjheu1xBboGX8b7
 sx8yuPi4370irSan0BDvlvdQdjBKIRiDjfGEKDhRwPhtvN6JREGakhEOC8MySQ37
 mP96B72Lmd+a7DEl5udOL7tQILA0DcUCX0aOyF714khnZuFU5tVlCotb/36xeJ+T
 FPc3RbEVQ90m8dYU6MNJ+ahtb/ZapxGTRfisIigB6wlnZa0Evabp9EJSce6oJMkm
 whbBhDubeEU18n9XAaofMbu+P2LAzq8cxiRMlsDvT4mIy7jO86jjCmhpu1Tfn2GY
 4wrEQZdWOMvhUsIhObXA0aC3BzC506uvnKPW3qy041RaxBuelWiBi29qzYbhxzkr
 DLDpWbUZNYPyFJjttpavyQb2/XRduBTJdVP1pQpkJNDsW5jLiBkpSqm9xNADapRY
 vLSYRX0JCIquaD+PAuxn
 =3aE8
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - code optimizations for the Intel VT-d driver

 - ability to switch off a previously enabled Intel IOMMU

 - support for 'struct iommu_device' for OMAP, Rockchip and Mediatek
   IOMMUs

 - header optimizations for IOMMU core code headers and a few fixes that
   became necessary in other parts of the kernel because of that

 - ACPI/IORT updates and fixes

 - Exynos IOMMU optimizations

 - updates for the IOMMU dma-api code to bring it closer to use per-cpu
   iova caches

 - new command-line option to set default domain type allocated by the
   iommu core code

 - another command line option to allow the Intel IOMMU switched off in
   a tboot environment

 - ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using an
   IDENTITY domain in conjunction with DMA ops, Support for SMR masking,
   Support for 16-bit ASIDs (was previously broken)

 - various other small fixes and improvements

* tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (63 commits)
  soc/qbman: Move dma-mapping.h include to qman_priv.h
  soc/qbman: Fix implicit header dependency now causing build fails
  iommu: Remove trace-events include from iommu.h
  iommu: Remove pci.h include from trace/events/iommu.h
  arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops()
  ACPI/IORT: Fix CONFIG_IOMMU_API dependency
  iommu/vt-d: Don't print the failure message when booting non-kdump kernel
  iommu: Move report_iommu_fault() to iommu.c
  iommu: Include device.h in iommu.h
  x86, iommu/vt-d: Add an option to disable Intel IOMMU force on
  iommu/arm-smmu: Return IOVA in iova_to_phys when SMMU is bypassed
  iommu/arm-smmu: Correct sid to mask
  iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid()
  iommu: Make iommu_bus_notifier return NOTIFY_DONE rather than error code
  omap3isp: Remove iommu_group related code
  iommu/omap: Add iommu-group support
  iommu/omap: Make use of 'struct iommu_device'
  iommu/omap: Store iommu_dev pointer in arch_data
  iommu/omap: Move data structures to omap-iommu.h
  iommu/omap: Drop legacy-style device support
  ...
2017-05-09 15:15:47 -07:00
Joerg Roedel 2c0248d688 Merge branches 'arm/exynos', 'arm/omap', 'arm/rockchip', 'arm/mediatek', 'arm/smmu', 'arm/core', 'x86/vt-d', 'x86/amd' and 'core' into next 2017-05-04 18:06:17 +02:00
Sricharan R 5a1bb638d5 drivers: acpi: Handle IOMMU lookup failure with deferred probing or error
This is an equivalent to the DT's handling of the iommu master's probe
with deferred probing when the corrsponding iommu is not probed yet.
The lack of a registered IOMMU can be caused by the lack of a driver for
the IOMMU, the IOMMU device probe not having been performed yet, having
been deferred, or having failed.

The first case occurs when the firmware describes the bus master and
IOMMU topology correctly but no device driver exists for the IOMMU yet
or the device driver has not been compiled in. Return NULL, the caller
will configure the device without an IOMMU.

The second and third cases are handled by deferring the probe of the bus
master device which will eventually get reprobed after the IOMMU.

The last case is currently handled by deferring the probe of the bus
master device as well. A mechanism to either configure the bus master
device without an IOMMU or to fail the bus master device probe depending
on whether the IOMMU is optional or mandatory would be a good
enhancement.

Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
[Lorenzo: Added fixes for dma_coherent_mask overflow, acpi_dma_configure
          called multiple times for same device]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-04-20 16:31:08 +02:00
Rafael J. Wysocki c381fc3a1b ACPI / scan: Avoid enumerating devices more than once
acpi_bus_attach() does not check the visited flag for devices that
have been enumerated already and some of them may be enumerated
for multiple times as a result, because some callers of
acpi_bus_scan() don't check the visited flag either.

For this reason, modify acpi_bus_attach() to check the visited flag
and avoid enumerating devices that have already been enumerated.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Joey Lee <jlee@suse.com>
2017-04-19 22:57:04 +02:00
Rafael J. Wysocki f5beabfe61 ACPI / scan: Apply default enumeration to devices with ACPI drivers
The current code in acpi_bus_attach() is inconsistent with respect
to device objects with ACPI drivers bound to them, as it allows
ACPI drivers to bind to device objects with existing "physical"
device companions, but it doesn't allow "physical" device objects
to be created for ACPI device objects with ACPI drivers bound to
them.  Thus, in some cases, the outcome depends on the ordering
of events which is confusing at best.

For this reason, modify acpi_bus_attach() to call
acpi_default_enumeration() for device objects with the
pnp.type.platform_id flag set regardless of whether or not
any ACPI drivers are bound to them.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Joey Lee <jlee@suse.com>
2017-04-19 22:56:44 +02:00
Rafael J. Wysocki 27d6b97786 Merge back ACPI namespace scan code changes for v4.12. 2017-04-15 00:22:00 +02:00
Rafael J. Wysocki f406270bf7 ACPI / scan: Set the visited flag for all enumerated devices
Commit 10c7e20b2f (ACPI / scan: fix enumeration (visited) flags for
bus rescans) attempted to fix a problem with ACPI-based enumerateion
of I2C/SPI devices, but it forgot to ensure that the visited flag
will be set for all of the other enumerated devices, so fix that.

Fixes: 10c7e20b2f (ACPI / scan: fix enumeration (visited) flags for bus rescans)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=194885
Reported-and-tested-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: 4.8+ <stable@vger.kernel.org> # 4.8+
2017-04-13 04:42:18 +02:00
Michal Hocko ffc10d82ff ACPI / scan: Drop support for force_remove
/sys/firmware/acpi/hotplug/force_remove was presumably added to support
auto offlining in the past. This is, however, inherently dangerous for
some hotplugable resources like memory. The memory offlining fails when
the memory is still in use and cannot be dropped or migrated. If we
ignore the failure we are basically allowing for subtle memory
corruption or a crash.

We have actually noticed the later while hitting BUG() during the memory
hotremove (remove_memory):
	ret = walk_memory_range(PFN_DOWN(start), PFN_UP(start + size - 1), NULL,
			check_memblock_offlined_cb);
	if (ret)
		BUG();

it took us quite non-trivial time realize that the customer had
force_remove enabled. Even if the BUG was removed here and we could
propagate the error up the call chain it wouldn't help at all because
then we would hit a crash or a memory corruption later and harder to
debug. So force_remove is unfixable for the memory hotremove. We haven't
checked other hotplugable resources to be prone to a similar problems.

Remove the force_remove functionality because it is not fixable currently.
Keep the sysfs file and report an error if somebody tries to enable it.
Encourage users to report about the missing functionality and work with
them with an alternative solution.

Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-13 03:51:47 +02:00
Lv Zheng 9c4aa1eecb ACPI / sysfs: Provide quirk mechanism to prevent GPE flooding
Sometimes, the users may require a quirk to be provided from ACPI subsystem
core to prevent a GPE from flooding.
Normally, if a GPE cannot be dispatched, ACPICA core automatically prevents
the GPE from firing. But there are cases the GPE is dispatched by _Lxx/_Exx
provided via AML table, and OSPM is lacking of the knowledge to get
_Lxx/_Exx correctly executed to handle the GPE, thus the GPE flooding may
still occur.

The existing quirk mechanism can be enabled/disabled using the following
commands to prevent such kind of GPE flooding during runtime:
 # echo mask > /sys/firmware/acpi/interrupts/gpe00
 # echo unmask > /sys/firmware/acpi/interrupts/gpe00
To avoid GPE flooding during boot, we need a boot stage mechanism.

This patch provides such a boot stage quirk mechanism to stop this kind of
GPE flooding. This patch doesn't fix any feature gap but since the new
feature gaps could be found in the future endlessly, and can disappear if
the feature gaps are filled, providing a boot parameter rather than a DMI
table should suffice.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=53071
Link: https://bugzilla.kernel.org/show_bug.cgi?id=117481
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/887793
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-26 23:16:39 +01:00
Linus Torvalds 9be962d525 More ACPI updates for v4.10-rc1
- Move some Linux-specific functionality to upstream ACPICA and
    update the in-kernel users of it accordingly (Lv Zheng).
 
  - Drop a useless warning (triggered by the lack of an optional
    object) from the ACPI namespace scanning code (Zhang Rui).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJYW90kAAoJEILEb/54YlRxS78P/RZwSOwkgdowIMGOlO7Hz5Xz
 6Psjfc3QdGhVGOau4F3Irg7HIDsPaHE5+xijwujWFK0wh89tknrChrFDrOueND6K
 rZ4w72lYROQhtQl4bu9yXZ2TswP3I5aYERDPyqKfDAi+SaQBpZUtmWdoh0I/JN2M
 svyuzxoRlNglgp2GWPnnnKHFe6plEeZgKjgoGjPAufDHakqYvP0cQwY3i4+PpuYh
 prXb4Xr4fFvAG2MhM9ciT02ewrQJcYUgVj5bnuSBmMu0y0zUBJ1kK7abiQlf+lTy
 /BCqQbllhHrrXQD0zkqi2oBFqWL4Bnj9r+5zj03KmBsfoz3u+zXr5CApDei8Yc06
 gGIZXX9aCqBirahkpsMFYPEQVPoPFCek0slXSyF5xKjCWYyocwgUtHnB87uIiSFO
 jCeSsWwT5IO9HnbsTf6x4xDWBdY6LOJgJyDirIGcNSUX+q4tfgn/LFrgN9Ck4M2g
 xkZn8e8H7u09ACX9l6dHZ1PCHlg7bWKeH6gcqdo5R4NOVeZxt9YDIz13ERsG3D17
 JZvdrAbBdC1fXfHnOLBj/BRy+TFvieWOC+kHBTAnPQlnkr7NjXXv/vgWU8flVL/z
 kxlR2U2lD2XarG/b8OHvYxO2k/TDLRenN0IqqFmYbmyhH0dHYKGGBLY4TetAXKNL
 N4EouS+xUBulCP2XOI8N
 =55TG
 -----END PGP SIGNATURE-----

Merge tag 'acpi-extra-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI updates from Rafael Wysocki:
 "Here are new versions of two ACPICA changes that were deferred
  previously due to a problem they had introduced, two cleanups on top
  of them and the removal of a useless warning message from the ACPI
  core.

  Specifics:

   - Move some Linux-specific functionality to upstream ACPICA and
     update the in-kernel users of it accordingly (Lv Zheng)

   - Drop a useless warning (triggered by the lack of an optional
     object) from the ACPI namespace scanning code (Zhang Rui)"

* tag 'acpi-extra-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory()
  ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users
  ACPICA: Tables: Allow FADT to be customized with virtual address
  ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel
  ACPI: do not warn if _BQC does not exist
2016-12-22 10:19:32 -08:00
Lorenzo Pieralisi 18b709beb5 ACPI/IORT: Make dma masks set-up IORT specific
The introduction of acpi_dma_configure() allows to configure DMA
and related IOMMU for any device that is DMA capable. To achieve
that goal it ensures DMA masks are set-up to sane default values
before proceeding with IOMMU and DMA ops configuration.

On x86/ia64 systems, through acpi_bind_one(), acpi_dma_configure() is
called for every device that has an ACPI companion, in that every device
is considered DMA capable on x86/ia64 systems (ie acpi_get_dma_attr() API),
which has the side effect of initializing dma masks also for
pseudo-devices (eg CPUs and memory nodes) and potentially for devices
whose dma masks were not set-up before the acpi_dma_configure() API was
introduced, which may have noxious side effects.

Therefore, in preparation for IORT firmware specific DMA masks set-up,
wrap the default DMA masks set-up in acpi_dma_configure() inside an IORT
specific wrapper that reverts to a NOP on x86/ia64 systems, restoring the
default expected behaviour on x86/ia64 systems and keeping DMA default
masks set-up on IORT based (ie ARM) arch configurations.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-12-06 16:57:33 +01:00
Zhang Rui 7020bcb828 ACPI: do not warn if _BQC does not exist
Starting from ACPI spec 3.0, it's only clarified that _BCM control
method is required if _BCL is implemented. There is no word
saying _BQC is required.

And in ACPI spec 6.1 B.5.4, for _BQC, it is explicitly stated that
"This optional method returns the current brightness level of a
built-in display output device. If present, it must be set by
the platform for initial brightness."

Thus remove the obsolete warning message.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-29 23:19:46 +01:00
Lorenzo Pieralisi 643b8e4d86 ACPI/IORT: Introduce iort_iommu_configure
DT based systems have a generic kernel API to configure IOMMUs
for devices (ie of_iommu_configure()).

On ARM based ACPI systems, the of_iommu_configure() equivalent can
be implemented atop ACPI IORT kernel API, with the corresponding
functions to map device identifiers to IOMMUs and retrieve the
corresponding IOMMU operations necessary for DMA operations set-up.

By relying on the iommu_fwspec generic kernel infrastructure,
implement the IORT based IOMMU configuration for ARM ACPI systems
and hook it up in the ACPI kernel layer that implements DMA
configuration for a device.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [ACPI core]
Reviewed-by: Tomasz Nowicki <tn@semihalf.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-11-29 15:57:48 +00:00
Lorenzo Pieralisi d760a1baf2 ACPI: Implement acpi_dma_configure
On DT based systems, the of_dma_configure() API implements DMA
configuration for a given device. On ACPI systems an API equivalent to
of_dma_configure() is missing which implies that it is currently not
possible to set-up DMA operations for devices through the ACPI generic
kernel layer.

This patch fills the gap by introducing acpi_dma_configure/deconfigure()
calls that for now are just wrappers around arch_setup_dma_ops() and
arch_teardown_dma_ops() and also updates ACPI and PCI core code to use
the newly introduced acpi_dma_configure/acpi_dma_deconfigure functions.

Since acpi_dma_configure() is used to configure DMA operations, the
function initializes the dma/coherent_dma masks to sane default values
if the current masks are uninitialized (also to keep the default values
consistent with DT systems) to make sure the device has a complete
default DMA set-up.

The DMA range size passed to arch_setup_dma_ops() is sized according
to the device coherent_dma_mask (starting at address 0x0), mirroring the
DT probing path behaviour when a dma-ranges property is not provided
for the device being probed; this changes the current arch_setup_dma_ops()
call parameters in the ACPI probing case, but since arch_setup_dma_ops()
is a NOP on all architectures but ARM/ARM64 this patch does not change
the current kernel behaviour on them.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> [pci]
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Tomasz Nowicki <tn@semihalf.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-11-29 15:57:44 +00:00
Rafael J. Wysocki 66f5854c68 Merge branch 'device-properties'
* device-properties:
  ACPI / platform: Add support for build-in properties
2016-11-11 23:23:02 +01:00
Heikki Krogerus 1571875bee ACPI / platform: Add support for build-in properties
We have a couple of drivers, acpi_apd.c and acpi_lpss.c,
that need to pass extra build-in properties to the devices
they create. Previously the drivers added those properties
to the struct device which is member of the struct
acpi_device, but that does not work. Those properties need
to be assigned to the struct device of the platform device
instead in order for them to become available to the
drivers.

To fix this, this patch changes acpi_create_platform_device
function to take struct property_entry pointer as parameter.

Fixes: 20a875e2e8 (serial: 8250_dw: Add quirk for APM X-Gene SoC)
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Yazen Ghannam <yazen.ghannam@amd.com>
Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-10 00:30:29 +01:00
Rafael J. Wysocki 0137a337d7 Merge branches 'acpi-wdat' and 'acpi-ec'
* acpi-wdat:
  watchdog: wdat_wdt: Fix warning for using 0 as NULL
  watchdog: wdat_wdt: fix return value check in wdat_wdt_probe()
  platform/x86: intel_pmc_ipc: Do not create iTCO watchdog when WDAT table exists
  i2c: i801: Do not create iTCO watchdog when WDAT table exists
  mfd: lpc_ich: Do not create iTCO watchdog when WDAT table exists
  ACPI / watchdog: Add support for WDAT hardware watchdog

* acpi-ec:
  ACPI / EC: Fix issues related to boot_ec
  ACPI / EC: Fix a gap that ECDT EC cannot handle EC events
  ACPI / EC: Fix a memory leakage issue in acpi_ec_add()
  ACPI / EC: Cleanup first_ec/boot_ec code
  ACPI / EC: Enable event freeze mode to improve event handling for suspend process
  ACPI / EC: Add PM operations to improve event handling for suspend process
  ACPI / EC: Add PM operations to improve event handling for resume process
  ACPI / EC: Fix an issue that SCI_EVT cannot be detected after event is enabled
  ACPI / EC: Add EC_FLAGS_QUERY_ENABLED to reveal a hidden logic
  ACPI / EC: Add PM operations for suspend/resume noirq stage
2016-10-02 01:40:07 +02:00
Mika Westerberg 058dfc7670 ACPI / watchdog: Add support for WDAT hardware watchdog
Starting from Intel Skylake the iTCO watchdog timer registers were moved to
reside in the same register space with SMBus host controller.  Not all
needed registers are available though and we need to unhide P2SB (Primary
to Sideband) device briefly to be able to read status of required NO_REBOOT
bit. The i2c-i801.c SMBus driver used to handle this and creation of the
iTCO watchdog platform device.

Windows, on the other hand, does not use the iTCO watchdog hardware
directly even if it is available. Instead it relies on ACPI Watchdog Action
Table (WDAT) table to describe the watchdog hardware to the OS. This table
contains necessary information about the the hardware and also set of
actions which are executed by a driver as needed.

This patch implements a new watchdog driver that takes advantage of the
ACPI WDAT table. We split the functionality into two parts: first part
enumerates the WDAT table and if found, populates resources and creates
platform device for the actual driver. The second part is the driver
itself.

The reason for the split is that this way we can make the driver itself to
be a module and loaded automatically if the WDAT table is found. Otherwise
the module is not loaded.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-24 02:10:04 +02:00
Lv Zheng 2a5708409e ACPI / EC: Fix a gap that ECDT EC cannot handle EC events
It is possible to register _Qxx from namespace and use the ECDT EC to
perform event handling. The reported bug reveals that Windows is using ECDT
in this way in case the namespace EC is not present. This patch facilitates
Linux to support ECDT in this way.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=115021
Reported-and-tested-by: Luya Tshimbalanga <luya@fedoraproject.org>
Tested-by: Jonh Henderson <jw.hendy@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-10 02:33:50 +02:00
Lorenzo Pieralisi 5331d9cab3 ACPI / drivers: replace acpi_probe_lock spinlock with mutex
Commit e647b53227 ("ACPI: Add early device probing infrastructure")
introduced code that allows inserting driver specific
struct acpi_probe_entry probe entries into ACPI linker sections
(one per-subsystem, eg irqchip, clocksource) that are then walked
to retrieve the data and function hooks required to probe the
respective kernel components.

Probing for all entries in a section is triggered through
the __acpi_probe_device_table() function, that in turn, according
to the table ID a given probe entry reports parses the table
with the function retrieved from the respective section structures
(ie struct acpi_probe_entry). Owing to the current ACPI table
parsing implementation, the __acpi_probe_device_table() function
has to share global variables with the acpi_match_madt() function, so
in order to guarantee mutual exclusion locking is required
between the two functions.

Current kernel code implements the locking through the acpi_probe_lock
spinlock; this has the side effect of requiring all code called
within the lock (ie struct acpi_probe_entry.probe_{table/subtbl} hooks)
not to sleep.

However, kernel subsystems that make use of the early probing
infrastructure are relying on kernel APIs that may sleep (eg
irq_domain_alloc_fwnode(), among others) in the function calls
pointed at by struct acpi_probe_entry.{probe_table/subtbl} entries
(eg gic_v2_acpi_init()), which is a bug.

Since __acpi_probe_device_table() is called from context
that is allowed to sleep the acpi_probe_lock spinlock can be replaced
with a mutex; this fixes the issue whilst still guaranteeing
mutual exclusion.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Fixes: e647b53227 (ACPI: Add early device probing infrastructure)
Cc: 4.4+ <stable@vger.kernel.org> # 4.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-02 22:22:21 +02:00
Linus Torvalds 08fd8c1768 xen: features and fixes for 4.8-rc0
- ACPI support for guests on ARM platforms.
 - Generic steal time support for arm and x86.
 - Support cases where kernel cpu is not Xen VCPU number (e.g., if
   in-guest kexec is used).
 - Use the system workqueue instead of a custom workqueue in various
   places.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXmLlrAAoJEFxbo/MsZsTRvRQH/1wOMF8BmlbZfR7H3qwDfjst
 ApNifCiZE08xDtWBlwUaBFAQxyflQS9BBiNZDVK0sysIdXeOdpWV7V0ZjRoLL+xr
 czsaaGXDcmXxJxApoMDVuT7FeP6rEk6LVAYRoHpVjJjMZGW3BbX1vZaMW4DXl2WM
 9YNaF2Lj+rpc1f8iG31nUxwkpmcXFog6ct4tu7HiyCFT3hDkHt/a4ghuBdQItCkd
 vqBa1pTpcGtQBhSmWzlylN/PV2+NKcRd+kGiwd09/O/rNzogTMCTTWeHKAtMpPYb
 Cu6oSqJtlK5o0vtr0qyLSWEGIoyjE2gE92s0wN3iCzFY1PldqdsxUO622nIj+6o=
 =G6q3
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-4.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen updates from David Vrabel:
 "Features and fixes for 4.8-rc0:

   - ACPI support for guests on ARM platforms.
   - Generic steal time support for arm and x86.
   - Support cases where kernel cpu is not Xen VCPU number (e.g., if
     in-guest kexec is used).
   - Use the system workqueue instead of a custom workqueue in various
     places"

* tag 'for-linus-4.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (47 commits)
  xen: add static initialization of steal_clock op to xen_time_ops
  xen/pvhvm: run xen_vcpu_setup() for the boot CPU
  xen/evtchn: use xen_vcpu_id mapping
  xen/events: fifo: use xen_vcpu_id mapping
  xen/events: use xen_vcpu_id mapping in events_base
  x86/xen: use xen_vcpu_id mapping when pointing vcpu_info to shared_info
  x86/xen: use xen_vcpu_id mapping for HYPERVISOR_vcpu_op
  xen: introduce xen_vcpu_id mapping
  x86/acpi: store ACPI ids from MADT for future usage
  x86/xen: update cpuid.h from Xen-4.7
  xen/evtchn: add IOCTL_EVTCHN_RESTRICT
  xen-blkback: really don't leak mode property
  xen-blkback: constify instance of "struct attribute_group"
  xen-blkfront: prefer xenbus_scanf() over xenbus_gather()
  xen-blkback: prefer xenbus_scanf() over xenbus_gather()
  xen: support runqueue steal time on xen
  arm/xen: add support for vm_assist hypercall
  xen: update xen headers
  xen-pciback: drop superfluous variables
  xen-pciback: short-circuit read path used for merging write values
  ...
2016-07-27 11:35:37 -07:00
Octavian Purdila 68bdb67732 ACPI: add support for ACPI reconfiguration notifiers
Add support for ACPI reconfiguration notifiers to allow subsystems
to react to changes in the ACPI tables that happen after the initial
enumeration. This is similar with the way dynamic device tree
notifications work.

The reconfigure notifications supported for now are device add and
device remove.

Since ACPICA allows only one table notification handler, this patch
makes the table notifier function generic and moves it out of the
sysfs specific code.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 21:52:35 +02:00
Octavian Purdila 10c7e20b2f ACPI / scan: fix enumeration (visited) flags for bus rescans
If the ACPI tables change as a result of a dinamically loaded table
and a bus rescan is required the enumeration/visited flag are not
consistent.

I2C/SPI are not directly enumerated in acpi_bus_attach(), however
the visited flag is set. This makes it impossible to check if an
ACPI device has already been enumerated by the I2C and SPI
subsystems. To fix this issue we only set the visited flags if
the device is not I2C or SPI.

With this change we also need to remove setting visited to false
from acpi_bus_attach(), otherwise if we rescan already enumerated
I2C/SPI devices we try to re-enumerate them.

Note that I2C/SPI devices can be enumerated either via a scan handler
(when using PRP0001) or via regular device_attach(). In either case
the flow goes through acpi_default_enumeration() which makes it the
ideal place to mark the ACPI device as enumerated.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 21:52:34 +02:00
Shannon Zhao a4e081b0dd Xen: ACPI: Hide UART used by Xen
ACPI 6.0 introduces a new table STAO to list the devices which are used
by Xen and can't be used by Dom0. On Xen virtual platforms, the physical
UART is used by Xen. So here it hides UART from Dom0.

CC: "Rafael J. Wysocki" <rjw@rjwysocki.net> (supporter:ACPI)
CC: Len Brown <lenb@kernel.org> (supporter:ACPI)
CC: linux-acpi@vger.kernel.org (open list:ACPI)
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-06 10:34:41 +01:00
Graeme Gregory 6ce2e188a6 ACPI / scan: AMBA bus probing support
On ARM64 some devices use the AMBA device and not the platform bus for
probing so add support for this. Uses a dummy clock for apb_pclk as ACPI
does not have a suitable clock representation and to keep the core
AMBA bus code unchanged between probing methods.

Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-16 19:58:25 +01:00
Lukas Wunner 2d12b6b381 ACPI / utils: Add acpi_dev_present()
There's an idiom in use by 7 Linux drivers to detect the presence of a
particular ACPI HID by walking the namespace with acpi_get_devices().
The callback passed to acpi_get_devices() is mostly identical across
the drivers, leading to lots of duplicate code.

Add acpi_dev_present(), the ACPI equivalent to pci_dev_present(),
allowing us to deduplicate all that boilerplate in the drivers.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-09 01:31:41 +01:00
Lukas Wunner ca9dc8d42b ACPI / scan: Fix acpi_bus_id_list bookkeeping
acpi_device_add() allocates and adds an element to acpi_bus_id_list
(or increments the instance count if the device's HID is already
present in the list), but the element is never deleted from the list
nor freed. Fix it.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-09 01:30:26 +01:00
Aaron Lu e399037e06 ACPI / scan: set status to 0 if _STA failed
Some ACPI node's _STA will touch operation region field, since the
evaluation of _STA in acpi_bus_type_and_status is very early, the
operation region handler is not ready yet. Instead of fail that function
and not creating the acpi_device node consequently, set status to 0 so
that later when the driver for that device is probing, it can find
the acpi_device node and proceed normally. And at that time, the
handler for the operation region is ready and its _STA evaluation will
succeed, its present status can be checked there.

Even there will be no driver using this node later, it doesn't seem
hurt to have one more acpi_device node created with status set to 0.

This happens on Microsoft Surface 3, where the SPI device node NTRG's
_STA touches GPIO fields and the SPI core driver will only enumerate SPI
devices from ACPI if the acpi_device node is 1: created; 2: _STA
indicates it's present.

Note that due to another problem in SPI driver, for NTRG to be actually
enumerated, some changes have to be made in the SPI layer, which is
addressed by Mika(not send out yet):
https://bugzilla.kernel.org/show_bug.cgi?id=104291#c23

Link: https://bugzilla.kernel.org/show_bug.cgi?id=104291
Reported-by: Bastien Nocera <bugzilla@hadess.net>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-30 15:06:16 +01:00
Rafael J. Wysocki f2115faaf0 Merge branch 'acpi-pci'
* acpi-pci:
  PCI: ACPI: Add support for PCI device DMA coherency
  PCI: OF: Move of_pci_dma_configure() to pci_dma_configure()
  of/pci: Fix pci_get_host_bridge_device leak
  device property: ACPI: Remove unused DMA APIs
  device property: ACPI: Make use of the new DMA Attribute APIs
  device property: Adding DMA Attribute APIs for Generic Devices
  ACPI: Adding DMA Attribute APIs for ACPI Device
  device property: Introducing enum dev_dma_attr
  ACPI: Honor ACPI _CCA attribute setting

Conflicts:
	drivers/crypto/ccp/ccp-platform.c
2015-11-07 01:30:10 +01:00
Suthikulpanit, Suravee b84f196d96 ACPI: Adding DMA Attribute APIs for ACPI Device
Adding acpi_get_dma_attr() to query DMA attributes of ACPI devices.
It returns the enum dev_dma_attr, which communicates DMA information
more clearly. This API replaces the acpi_check_dma(), which will be
removed in subsequent patch.

This patch also provides a convenient function, acpi_dma_supported(),
to check DMA support of the specified ACPI device.

Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-07 01:29:21 +01:00
Rafael J. Wysocki e3ed766b49 Merge branch 'acpi-init'
* acpi-init:
  clocksource: cosmetic: Drop OF 'dependency' from symbols
  clocksource / arm_arch_timer: Convert to ACPI probing
  clocksource: Add new CLKSRC_{PROBE,ACPI} config symbols
  clocksource / ACPI: Add probing infrastructure for ACPI-based clocksources
  irqchip / GIC: Convert the GIC driver to ACPI probing
  irqchip / ACPI: Add probing infrastructure for ACPI-based irqchips
  ACPI: Add early device probing infrastructure
2015-10-25 22:55:14 +01:00
Rafael J. Wysocki 343ccb040e Merge branches 'acpi-scan', 'acpi-tables', 'acpi-ec' and 'acpi-assorted'
* acpi-scan:
  ACPI / scan: use kstrdup_const() in acpi_add_id()
  ACPI / scan: constify struct acpi_hardware_id::id
  ACPI / scan: constify first argument of struct acpi_scan_handler::match

* acpi-tables:
  ACPI / tables: test the correct variable
  x86, ACPI: Handle apic/x2apic entries in MADT in correct order
  ACPI / tables: Add acpi_subtable_proc to ACPI table parsers

* acpi-ec:
  ACPI / EC: Fix a race issue in acpi_ec_guard_event()
  ACPI / EC: Fix query handler related issues

* acpi-assorted:
  ACPI: change acpi_sleep_proc_init() to return void
  ACPI: change init_acpi_device_notify() to return void
2015-10-25 22:54:46 +01:00
Marc Zyngier e647b53227 ACPI: Add early device probing infrastructure
IRQ controllers and timers are the two types of device the kernel
requires before being able to use the device driver model.

ACPI so far lacks a proper probing infrastructure similar to the one
we have with DT, where we're able to declare IRQ chips and
clocksources inside the driver code, and let the core code pick it up
and call us back on a match. This leads to all kind of really ugly
hacks all over the arm64 code and even in the ACPI layer.

In order to allow some basic probing based on the ACPI tables,
introduce "struct acpi_probe_entry" which contains just enough
data and callbacks to match a table, an optional subtable, and
call a probe function. A driver can, at build time, register itself
and expect being called if the right entry exists in the ACPI
table.

A acpi_probe_device_table() is provided, taking an identifier for
a set of acpi_prove_entries, and iterating over the registered
entries.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-01 02:18:38 +02:00
Rasmus Villemoes 6a0d12ef99 ACPI / scan: use kstrdup_const() in acpi_add_id()
Empirically, acpi_add_id is mostly called with string literals, so
using kstrdup_const for initializing struct acpi_hardware_id::id saves
a little run-time memory and a string copy.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-15 02:59:07 +02:00
Rasmus Villemoes 844142c3f8 ACPI / scan: constify struct acpi_hardware_id::id
This is preparation for using kstrdup_const to initialize that member.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-15 02:57:55 +02:00
Rafael J. Wysocki 504a337499 ACPI / property: Extend device_get_next_child_node() to data-only nodes
Make device_get_next_child_node() work with ACPI data-only subnodes
introduced previously.

Namely, replace acpi_get_next_child() with acpi_get_next_subnode()
that can handle (and return) child device objects as well as child
data-only subnodes of the given device and modify the ACPI part
of the GPIO subsystem to handle data-only subnodes returned by it.

To that end, introduce acpi_node_get_gpiod() taking a struct
fwnode_handle pointer as the first argument.  That argument may
point to an ACPI device object as well as to a data-only subnode
and the function should do the right thing (ie. look for the matching
GPIO descriptor correctly) in either case.

Next, modify fwnode_get_named_gpiod() to use acpi_node_get_gpiod()
instead of acpi_get_gpiod_by_index() which automatically causes
devm_get_gpiod_from_child() to work with ACPI data-only subnodes
that may be returned by device_get_next_child_node() which in turn
is required by the users of that function (the gpio_keys_polled
and gpio-leds drivers).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-15 01:47:34 +02:00
Rafael J. Wysocki 3431e490b5 Merge branch 'acpi-scan' into acpi-pm
Conflicts:
	drivers/acpi/scan.c

The conflict is resolved by moving the just introduced
acpi_device_is_first_physical_node() to bus.c and using
the existing acpi_companion_match() from there.

There will be an additional commit to combine the two.
2015-07-29 23:57:51 +02:00
Mika Westerberg 712e960f0e ACPI / PM: Attach ACPI power domain only once
Some devices, like MFD subdevices, share a single ACPI companion device so
that they are able to access their resources and children. However,
currently all these subdevices are attached to the ACPI power domain and
this might cause that the power methods for the companion device get called
more than once.

In order to solve this we attach the ACPI power domain only to the first
physical device that is bound to the ACPI companion device. In case of MFD
devices, this is the parent MFD device itself.

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-28 08:50:42 +01:00
Rafael J. Wysocki 1dcc3d3362 ACPI / bus: Move ACPI bus type registration
Move the registration of the ACPI bus type to acpi_bus_init() and
avoid using ACPI going forward if it fails (too many things depend on
the presence of the ACPI bus type).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-17 22:54:09 +02:00
Rafael J. Wysocki 5894b0c46e ACPI / scan: Move bus operations and notification routines to bus.c
To reduce the size of scan.c and improve the readability of it, move
code related to device notification, the definitions of the ACPI bus
operations and the driver management code to drivers/acpi/bus.c.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-17 22:54:01 +02:00
Rafael J. Wysocki 68c6b148da ACPI / scan: Move device matching code to bus.c
To reduce the size of scan.c and improve the readability of it, move
code related device matching into drivers/acpi/bus.c.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-17 22:53:52 +02:00
Rafael J. Wysocki c2efefb33a ACPI / scan: Move sysfs-related device code to a separate file
To reduce the size of scan.c and improve the readability of it, move
all code related to device sysfs, modalias creation etc. to a new
file called device_sysfs.c.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-17 22:53:43 +02:00
Suthikulpanit, Suravee 26095a01d3 ACPI / scan: Add support for ACPI _CLS device matching
Device drivers typically use ACPI _HIDs/_CIDs listed in struct device_driver
acpi_match_table to match devices. However, for generic drivers, we do not
want to list _HID for all supported devices. Also, certain classes of devices
do not have _CID (e.g. SATA, USB). Instead, we can leverage ACPI _CLS,
which specifies PCI-defined class code (i.e. base-class, subclass and
programming interface). This patch adds support for matching ACPI devices using
the _CLS method.

To support loadable module, current design uses _HID or _CID to match device's
modalias. With the new way of matching with _CLS this would requires modification
to the current ACPI modalias key to include _CLS. This patch appends PCI-defined
class-code to the existing ACPI modalias as following.

    acpi:<HID>:<CID1>:<CID2>:..:<CIDn>:<bbsspp>:
E.g:
    # cat /sys/devices/platform/AMDI0600:00/modalias
    acpi:AMDI0600:010601:

where bb is th base-class code, ss is te sub-class code, and pp is the
programming interface code

Since there would not be _HID/_CID in the ACPI matching table of the driver,
this patch adds a field to acpi_device_id to specify the matching _CLS.

    static const struct acpi_device_id ahci_acpi_match[] = {
        { ACPI_DEVICE_CLASS(PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff) },
        {},
    };

In this case, the corresponded entry in modules.alias file would be:

    alias acpi*:010601:* ahci_platform

Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-07 01:55:20 +02:00
Rafael J. Wysocki e193cd15ae Merge branch 'acpi-cca'
* acpi-cca:
  ufs: fix TRUE and FALSE re-define build error
  megaraid_sas: fix TRUE and FALSE re-define build error
  amd-xgbe: Unify coherency checking logic with device_dma_is_coherent()
  crypto: ccp - Unify coherency checking logic with device_dma_is_coherent()
  device property: Introduces device_dma_is_coherent()
  arm64 : Introduce support for ACPI _CCA object
  ACPI / scan: Parse _CCA and setup device coherency
2015-06-19 01:17:35 +02:00
Rafael J. Wysocki 4def8a360f Merge branch 'acpi-video'
* acpi-video: (38 commits)
  ACPI / video: Make acpi_video_unregister_backlight() private
  acpi-video-detect: Remove old API
  toshiba-acpi: Port to new backlight interface selection API
  thinkpad-acpi: Port to new backlight interface selection API
  sony-laptop: Port to new backlight interface selection API
  samsung-laptop: Port to new backlight interface selection API
  msi-wmi: Port to new backlight interface selection API
  msi-laptop: Port to new backlight interface selection API
  intel-oaktrail: Port to new backlight interface selection API
  ideapad-laptop: Port to new backlight interface selection API
  fujitsu-laptop: Port to new backlight interface selection API
  eeepc-laptop: Port to new backlight interface selection API
  dell-wmi: Port to new backlight interface selection API
  dell-laptop: Port to new backlight interface selection API
  compal-laptop: Port to new backlight interface selection API
  asus-wmi: Port to new backlight interface selection API
  asus-laptop: Port to new backlight interface selection API
  apple-gmux: Port to new backlight interface selection API
  acer-wmi: Port to new backlight interface selection API
  ACPI / video: Fix acpi_video _register vs _unregister_backlight race
  ...
2015-06-19 01:17:26 +02:00
Rafael J. Wysocki 4f1fd900c2 Merge branches 'acpi-pm', 'acpi-apei', 'acpi-osl' and 'acpi-pci'
* acpi-pm:
  ACPI / PM: Add missing pm_generic_complete() invocation
  ACPI / PM: Turn power resources on and off in the right order during resume
  ACPI / PM: Rework device power management to follow ACPI 6
  ACPI / PM: Drop stale comment from acpi_power_transition()

* acpi-apei:
  GHES: Make NMI handler have a single reader
  GHES: Elliminate double-loop in the NMI handler
  GHES: Panic right after detection
  GHES: Carve out the panic functionality
  GHES: Carve out error queueing in a separate function

* acpi-osl:
  ACPI / osl: use same type for acpi_predefined_names values as in definition

* acpi-pci:
  ACPI / PCI: remove stale list_head in struct acpi_prt_entry
2015-06-19 01:16:21 +02:00
Hans de Goede adc8bb8e0f acpi-video-detect: Move acpi_is_video_device() to acpi/scan.c
This allows video_detect.c to be build as a module, this is a preparation
patch for the backlight interface selection logic cleanup.

Note this commit also causes acpi_is_video_device() to always be build
indepedent of CONFIG_ACPI_VIDEO, as there is no reason to make its
building depend on CONFIG_ACPI_VIDEO.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-19 01:10:26 +02:00
Suthikulpanit, Suravee d056267483 ACPI / scan: Parse _CCA and setup device coherency
This patch implements support for ACPI _CCA object, which is introduced in
ACPIv5.1, can be used for specifying device DMA coherency attribute.

The parsing logic traverses device namespace to parse coherency
information, and stores it in acpi_device_flags. Then uses it to call
arch_setup_dma_ops() when creating each device enumerated in DSDT
during ACPI scan.

This patch also introduces acpi_dma_is_coherent(), which provides
an interface for device drivers to check the coherency information
similarly to the of_dma_is_coherent().

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:40:48 +02:00
Mathias Krause 0519ade718 ACPI / scan: constify ACPI device ids
Make the button ACPI device ID array static const. Safes us a little bit
of code.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:31:02 +02:00
Rafael J. Wysocki ee89209402 ACPI / property: Define a symbol for PRP0001
Use a #defined symbol ACPI_DT_NAMESPACE_HID instead of the PRP0001
string.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
2015-05-22 23:57:14 +02:00
Rafael J. Wysocki 20dacb71ad ACPI / PM: Rework device power management to follow ACPI 6
The ACPI 6 specification has made some changes in the device power
management area.  In particular:

 * The D3hot power state is now supposed to be always available
   (instead of D3cold) and D3cold is only regarded as valid if the
   _PR3 object is present for the given device.

 * The required ordering of transitions into power states deeper than
   D0 is now such that for a transition into state Dx the _PSx method
   is supposed to be executed first, if present, and the states of
   the power resources the device depends on are supposed to be
   changed after that.

 * It is now explicitly forbidden to transition devices from
   lower-power (deeper) into higher-power (shallower) power states
   other than D0.

Those changes have been made so the specification reflects the
Windows' device power management code that the vast majority of
systems using ACPI is validated against.

To avoid artificial differences in ACPI device power management
between Windows and Linux, modify the ACPI device power management
code to follow the new specification.  Add comments explaining the
code flow in some unclear places.

This only may affect some real corner cases in which the OS behavior
expected by the firmware is different from the Windows one, but that's
quite unlikely.  The transition ordering change affects transitions
to D1 and D2 which are rarely used (if at all) and into D3hot and
D3cold for devices actually having _PR3, but those are likely to
be validated against Windows anyway.  The other changes may affect
code calling acpi_device_get_power() or acpi_device_update_power()
where ACPI_STATE_D3_HOT may be returned instead of ACPI_STATE_D3_COLD
(that's why the ACPI fan driver needs to be updated too) and since
transitions into ACPI_STATE_D3_HOT may remove power now, it is better
to avoid this one in acpi_pm_device_sleep_state() if the "no power
off" PM QoS flag is set.

The only existing user of acpi_device_can_poweroff() really cares
about the case when _PR3 is present, so the change in that function
should not cause any problems to happen too.

A plus is that PCI_D3hot can be mapped to ACPI_STATE_D3_HOT
now and the compatibility with older systems should be covered
automatically.

In any case, if any real problems result from this, it still will
be better to follow the Windows' behavior (which now is reflected
by the specification too) in general and handle the cases when it
doesn't work via quirks.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-16 01:55:35 +02:00
Rafael J. Wysocki 7d284352f9 ACPI / scan: Add a scan handler for PRP0001
If the special PRP0001 device ID is present in the given device's list
of ACPI/PNP IDs and the device has a valid "compatible" property in
the _DSD, it should be enumerated using the default mechanism,
unless some scan handlers match the IDs preceding PRP0001 in the
device's list of ACPI/PNP IDs.  In addition to that, no scan handlers
matching the IDs following PRP0001 in that list should be attached
to the device.

To make that happen, define a scan handler that will match PRP0001
and trigger the default enumeration for the matching devices if the
"compatible" property is present for them.

Since that requires the check for platform_id and device->handler
to be removed from acpi_default_enumeration(), move the fallback
invocation of acpi_default_enumeration() to acpi_bus_attach()
(after it's checked if there's a matching ACPI driver for the
device), which is a better place to call it, and do the platform_id
check in there too (device->handler is guaranteed to be unset at
the point where the function is looking for a matching ACPI driver).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
2015-04-24 02:18:01 +02:00
Rafael J. Wysocki 4c533c801d ACPI / scan: Annotate physical_node_lock in acpi_scan_is_offline()
acpi_scan_is_offline() may be called under the physical_node_lock
lock of the given device object's parent, so prevent lockdep from
complaining about that by annotating that instance with
SINGLE_DEPTH_NESTING.

Fixes: caa73ea158 (ACPI / hotplug / driver core: Handle containers in a special way)
Reported-and-tested-by: Xie XiuQi <xiexiuqi@huawei.com>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-24 02:16:03 +02:00
Rafael J. Wysocki 5f2e3274e5 ACPI / scan: Fix NULL pointer dereference in acpi_companion_match()
Commit e1acdeb0e7 "ACPI / scan: Simplify acpi_match_device()"
introduced code that may lead to a NULL pointer dereference when
trying to unlock a mutex.  Fix that.

Fixes: e1acdeb0e7 "ACPI / scan: Simplify acpi_match_device()"
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-13 21:35:51 +02:00
Rafael J. Wysocki 8765c5ba19 ACPI / scan: Rework modalias creation when "compatible" is present
Currently, the ACPI modalias creation covers two mutually exclusive
cases: If the PRP0001 device ID is present in the device's list of
ACPI/PNP IDs and the "compatible" property is present in _DSD, the
created modalias will follow the OF rules of modalias creation.
Otherwise, ACPI rules are used.

However, that is not really desirable, because the presence of PRP0001
in the list of device IDs generally does not preclude using other
ACPI/PNP IDs with that device and those other IDs may be of higher
priority.  In those cases, the other IDs should take preference over
PRP0001 and therefore they also should be present in the modalias.

For this reason, rework the modalias creation for ACPI so that it
shows both the ACPI-style and OF-style modalias strings if the
device has a non-empty list of ACPI/PNP IDs (other than PRP0001)
and a valid "compatible" property at the same time.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2015-04-13 00:29:36 +02:00
Rafael J. Wysocki 2b9c698efa ACPI / scan: Take the PRP0001 position in the list of IDs into account
If the special PRP0001 device ID is present in a device's _CID list,
it should not prevent any ACPI/PNP IDs preceding it in the device's
list of identifiers from being matched first.  That is, only if none
of the IDs preceding PRP0001 in the device's PNP/ACPI IDs list
matches the IDs recognized by the driver, the driver's list of
"compatible" IDs should be matched against the device's "compatible"
property, if present.

In addition to that, drivers can provide both acpi_match_table and
of_match_table at the same time and the of_compatible matching
should be used in that case too if PRP0001 is present in the
device's list of identifiers.

To make that happen, rework acpi_driver_match_device() to do the
"compatible" property check in addition to matching the driver's
list of ACPI IDs against the device's one.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2015-04-10 16:07:51 +02:00
Rafael J. Wysocki e1acdeb0e7 ACPI / scan: Simplify acpi_match_device()
Redefine acpi_companion_match() to return an ACPI device object
pointer instead of a bool and use it to remove some redundant code
from acpi_match_device().

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2015-04-10 16:07:38 +02:00
Rafael J. Wysocki 54fe9ce385 ACPI / scan: Generalize of_compatible matching
Redefine the function used for matching the device's "compatible"
property against a given list of "compatible" strings to take
a pointer to that list instead of a driver object pointer to
make it more general.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2015-04-10 16:07:30 +02:00
Aaron Lu fd9caef4e2 ACPI / scan: fix fixed event handler return value
The fixed event handler should return a value that is either 0 or 1
meanning if the event is handled or not, instead of an acpi_status to
mean if the handler runs well or not.

Suggested-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-18 02:06:49 +01:00
Ken Xue 92082a8886 ACPI: add AMD ACPI2Platform device support for x86 system
This new feature is to interpret AMD specific ACPI device to
platform device such as I2C, UART, GPIO found on AMD CZ and
later chipsets. It based on example intel LPSS. Now, it can
support AMD I2C, UART and GPIO.

Signed-off-by: Ken Xue <Ken.Xue@amd.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-06 15:42:16 +01:00
Rafael J. Wysocki 1b1f3e1699 ACPI / PM: Fix PM initialization for devices that are not present
If an ACPI device object whose _STA returns 0 (not present and not
functional) has _PR0 or _PS0, its power_manageable flag will be set
and acpi_bus_init_power() will return 0 for it.  Consequently, if
such a device object is passed to the ACPI device PM functions, they
will attempt to carry out the requested operation on the device,
although they should not do that for devices that are not present.

To fix that problem make acpi_bus_init_power() return an error code
for devices that are not present which will cause power_manageable to
be cleared for them as appropriate in acpi_bus_get_power_flags().
However, the lists of power resources should not be freed for the
device in that case, so modify acpi_bus_get_power_flags() to keep
those lists even if acpi_bus_init_power() returns an error.
Accordingly, when deciding whether or not the lists of power
resources need to be freed, acpi_free_power_resources_lists()
should check the power.flags.power_resources flag instead of
flags.power_manageable, so make that change too.

Furthermore, if acpi_bus_attach() sees that flags.initialized is
unset for the given device, it should reset the power management
settings of the device and re-initialize them from scratch instead
of relying on the previous settings (the device may have appeared
after being not present previously, for example), so make it use
the 'valid' flag of the D0 power state as the initial value of
flags.power_manageable for it and call acpi_bus_init_power() to
discover its current power state.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
2015-01-05 22:49:52 +01:00
Rafael J. Wysocki be10f60d29 Merge branches 'acpi-scan', 'acpi-utils' and 'acpi-pm'
* acpi-scan:
  ACPI / scan: Change the level of _DEP-related messages to KERN_DEBUG

* acpi-utils:
  ACPI / utils: Drop error messages from acpi_evaluate_reference()

* acpi-pm:
  ACPI / PM: Do not disable wakeup GPEs that have not been enabled
2014-12-18 18:42:56 +01:00
Rafael J. Wysocki 80167a24a2 ACPI / scan: Change the level of _DEP-related messages to KERN_DEBUG
Two _DEP-related failure messages are printed as dev_err() which is
unnecessary and annoying.  Use dev_dbg() to print them.

While at it, one of the messages should actually say it is related
to _DEP, so modify it to that effect.

Fixes: 40e7fcb192 (ACPI: Add _DEP support to fix battery issue on Asus T100TA)
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-12 22:48:44 +01:00
Rafael J. Wysocki 69bad361e6 Merge branches 'acpi-scan', 'acpi-pm', 'acpi-lpss' and 'acpi-processor'
* acpi-scan:
  ACPI: Add _DEP support to fix battery issue on Asus T100TA

* acpi-pm:
  ACPI / sleep: Drain outstanding events after disabling multiple GPEs
  ACPI / PM: Fixed a typo in a comment

* acpi-lpss:
  dmaengine: dw: enable runtime PM
  ACPI / LPSS: introduce a 'proxy' device to power on LPSS for DMA
  ACPI / LPSS: allow to use specific PM domain during ->probe()
  ACPI / LPSS: add all LPSS devices to the specific power domain

* acpi-processor:
  ACPI / cpuidle: avoid assigning signed errno to acpi_status
  ACPI / processor: remove unused variabled from acpi_processor_power structure
  ACPI / processor: Update the comments in processor.h
2014-12-08 19:52:16 +01:00
Lan Tianyu 40e7fcb192 ACPI: Add _DEP support to fix battery issue on Asus T100TA
ACPI 5.0 introduces _DEP (Operation Region Dependencies) to designate
device objects that OSPM should assign a higher priority in start
ordering due to future operation region accesses.

On Asus T100TA, ACPI battery info are read from a I2C slave device via
I2C operation region. Before I2C operation region handler is installed,
battery _STA always returns 0. There is a _DEP method of designating
start order under battery device node.

This patch is to implement _DEP feature to fix battery issue on the
Asus T100TA.  Introducing acpi_dep_list and adding dep_unmet count
in struct acpi_device. During ACPI namespace scan, create struct
acpi_dep_data for a valid pair of master (device pointed to by _DEP)/
slave(device with _DEP), record master's and slave's ACPI handle in
it and put it into acpi_dep_list. The dep_unmet count will increase
by one if there is a device under its _DEP. Driver's probe() should
return EPROBE_DEFER when find dep_unmet is larger than 0. When I2C
operation region handler is installed, remove all struct acpi_dep_data
on the acpi_dep_list whose master is pointed to I2C host controller
and decrease slave's dep_unmet. When dep_unmet decreases to 0, all
_DEP conditions are met and then do acpi_bus_attach() for the device
in order to resolve battery _STA issue on the Asus T100TA.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=69011
Tested-by: Jan-Michael Brummer <jan.brummer@tabos.org>
Tested-by: Adam Williamson <adamw@happyassassin.net>
Tested-by: Michael Shigorin <shigorin@gmail.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-24 01:04:55 +01:00
Rafael J. Wysocki 8a0662d9ed Driver core: Unified interface for firmware node properties
Add new generic routines are provided for retrieving properties from
device description objects in the platform firmware in case there are
no struct device objects for them (either those objects have not been
created yet or they do not exist at all).

The following functions are provided:

fwnode_property_present()
fwnode_property_read_u8()
fwnode_property_read_u16()
fwnode_property_read_u32()
fwnode_property_read_u64()
fwnode_property_read_string()
fwnode_property_read_u8_array()
fwnode_property_read_u16_array()
fwnode_property_read_u32_array()
fwnode_property_read_u64_array()
fwnode_property_read_string_array()

in analogy with the corresponding functions for struct device added
previously.  For all of them, the first argument is a pointer to struct
fwnode_handle (new type) that allows a device description object
(depending on what platform firmware interface is in use) to be
obtained.

Add a new macro device_for_each_child_node() for iterating over the
children of the device description object associated with a given
device and a new function device_get_child_node_count() returning the
number of a given device's child nodes.

The interface covers both ACPI and Device Trees.

Suggested-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04 21:58:23 +01:00
Mika Westerberg 733e625139 ACPI: Allow drivers to match using Device Tree compatible property
We have lots of existing Device Tree enabled drivers and allocating
separate _HID for each is not feasible. Instead we allocate special _HID
"PRP0001" that means that the match should be done using Device Tree
compatible property using driver's .of_match_table instead if the driver
is missing .acpi_match_table.

If there is a need to distinguish from where the device is enumerated
(DT/ACPI) driver can check dev->of_node or ACPI_COMPATION(dev).

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04 21:58:21 +01:00
Mika Westerberg ffdcd955c3 ACPI: Add support for device specific properties
Device Tree is used in many embedded systems to describe the system
configuration to the OS. It supports attaching properties or name-value
pairs to the devices it describe. With these properties one can pass
additional information to the drivers that would not be available
otherwise.

ACPI is another configuration mechanism (among other things) typically
seen, but not limited to, x86 machines. ACPI allows passing arbitrary
data from methods but there has not been mechanism equivalent to Device
Tree until the introduction of _DSD in the recent publication of the
ACPI 5.1 specification.

In order to facilitate ACPI usage in systems where Device Tree is
typically used, it would be beneficial to standardize a way to retrieve
Device Tree style properties from ACPI devices, which is what we do in
this patch.

If a given device described in ACPI namespace wants to export properties it
must implement _DSD method (Device Specific Data, introduced with ACPI 5.1)
that returns the properties in a package of packages. For example:

	Name (_DSD, Package () {
		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
		Package () {
			Package () {"name1", <VALUE1>},
			Package () {"name2", <VALUE2>},
			...
		}
	})

The UUID reserved for properties is daffd814-6eba-4d8c-8a91-bc9bbf4aa301
and is documented in the ACPI 5.1 companion document called "_DSD
Implementation Guide" [1], [2].

We add several helper functions that can be used to extract these
properties and convert them to different Linux data types.

The ultimate goal is that we only have one device property API that
retrieves the requested properties from Device Tree or from ACPI
transparent to the caller.

[1] http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel.htm
[2] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf

Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04 21:58:21 +01:00
Mika Westerberg 52870786ff ACPI: Use ACPI companion to match only the first physical device
Commit 6ab3430129 ("mfd: Add ACPI support") made the MFD subdevices
share the parent MFD ACPI companion if no _HID/_CID is specified for
the subdevice in mfd_cell description. However, since all the subdevices
share the ACPI companion, the match and modalias generation logic started
to use the ACPI companion as well resulting this:

  # cat /sys/bus/platform/devices/HID-SENSOR-200041.6.auto/modalias
  acpi:INT33D1:PNP0C50:

instead of the expected one

  # cat /sys/bus/platform/devices/HID-SENSOR-200041.6.auto/modalias
  platform:HID-SENSOR-200041

In other words the subdevice modalias is overwritten by the one taken from
ACPI companion. This causes udev not to load the driver anymore.

It is useful to be able to share the ACPI companion so that MFD subdevices
(and possibly other devices as well) can access the ACPI resources even if
they do not have ACPI representation in the namespace themselves.

An example where this is used is Minnowboard LPC driver that creates GPIO
as a subdevice among other things. Without the ACPI companion gpiolib is
not able to lookup the corresponding GPIO controller from ACPI GpioIo
resource.

To fix this, restrict the match and modalias logic to be limited to the
first (primary) physical device associated with the given ACPI comapnion.
The secondary devices will still be able to access the ACPI companion,
but they will be matched in a different way.

Fixes: 6ab3430129 (mfd: Add ACPI support)
Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-27 18:41:46 +01:00
Linus Torvalds 1c45d9a920 ACPI and power management updates for 3.18-rc2
- Fix for a recent PCI power management change that overlooked
    the fact that some IRQ chips might not be able to configure
    PCIe PME for system wakeup from Lucas Stach.
 
  - Fix for a bug introduced in 3.17 where acpi_device_wakeup()
    is called with a wrong ordering of arguments from Zhang Rui.
 
  - A bunch of intel_pstate driver fixes (all -stable candidates)
    from Dirk Brandewie, Gabriele Mazzotta and Pali Rohár.
 
  - Fixes for a rather long-standing problem with the OOM killer
    and the freezer that frozen processes killed by the OOM do
    not actually release any memory until they are thawed, so
    OOM-killing them is rather pointless, with a couple of
    cleanups on top (Michal Hocko, Cong Wang, Rafael J Wysocki).
 
  - ACPICA update to upstream release 20140926, inlcuding mostly
    cleanups reducing differences between the upstream ACPICA and
    the kernel code, tools changes (acpidump, acpiexec) and
    support for the _DDN object (Bob Moore, Lv Zheng).
 
  - New PM QoS class for memory bandwidth from Tomeu Vizoso.
 
  - Default 32-bit DMA mask for platform devices enumerated by ACPI
    (this change is mostly needed for some drivers development in
    progress targeted at 3.19) from Heikki Krogerus.
 
  - ACPI EC driver cleanups, mostly related to debugging, from
    Lv Zheng.
 
  - cpufreq-dt driver updates from Thomas Petazzoni.
 
  - powernv cpuidle driver update from Preeti U Murthy.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJUSjZFAAoJEILEb/54YlRxyfIP/irc/f7DDb0mElF755ANtSXp
 CTVIQSn6uZ2P//ElQO0+nckZSo39jrBkHVu11vDxmVt2PJE2VBgNjHJLyf1boaPI
 9aR5kzVmL6jzJ9wA3gYqr91uCVegY1KDFx2KrAlrNomrlc2xtTGf6F17I4tI9qHL
 pgc8jhJZ1swn4wL0qnqffLsmx3Hoq3uIO5PNAXD+qUSgm5+8zZwLLlvnrM8upOO4
 cHTvxh+ZwXrak4RO4NciYZPKJQAD47MTcJCDR/bg7MKxeiJPrzLrR+WrbCYr5md1
 iSiVThZDZnnYTiDLPiemcXoe3jpG2bigXncxJVRDJ7MBOO7ZX7mppwdNnMaNM5kN
 92kvLOy269NSS2SFJ0N/B6Xr1jQ0HEdwj7erl4xJIkobKRuvN9fYyVWkoL9i3sj4
 OQ7fqhXoEON9CW0KwC5FRAswIungB//o5OjN7VlNKTBKfPdWAjgVQOyeeZ+gSoQo
 9tbR/QEEEcHn8fiQpBM9cQw2NL0Rx1ZzHXs7dB0U6ynfG5Drge4OTTwl/Gm4mavB
 8Tv3ji26VvQdFr+It2SsijjjjjzVIsdK5iUpSHYo876u4l20CEH3gSpVA/jNhgH6
 HaAN5DYIot4Qq5ifjDydRT6WGIyxsVMk3SqehjF47TDaX4l1FbSYWGVyKxfjnQs3
 2rWJ3yuDjH28Cfmi0MO0
 =4Q8f
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:
 "This is material that didn't make it to my 3.18-rc1 pull request for
  various reasons, mostly related to timing and travel (LinuxCon EU /
  LPC) plus a couple of fixes for recent bugs.

  The only really new thing here is the PM QoS class for memory
  bandwidth, but it is simple enough and users of it will be added in
  the next cycle.  One major change in behavior is that platform devices
  enumerated by ACPI will use 32-bit DMA mask by default.  Also included
  is an ACPICA update to a new upstream release, but that's mostly
  cleanups, changes in tools and similar.  The rest is fixes and
  cleanups mostly.

  Specifics:

   - Fix for a recent PCI power management change that overlooked the
     fact that some IRQ chips might not be able to configure PCIe PME
     for system wakeup from Lucas Stach.

   - Fix for a bug introduced in 3.17 where acpi_device_wakeup() is
     called with a wrong ordering of arguments from Zhang Rui.

   - A bunch of intel_pstate driver fixes (all -stable candidates) from
     Dirk Brandewie, Gabriele Mazzotta and Pali Rohár.

   - Fixes for a rather long-standing problem with the OOM killer and
     the freezer that frozen processes killed by the OOM do not actually
     release any memory until they are thawed, so OOM-killing them is
     rather pointless, with a couple of cleanups on top (Michal Hocko,
     Cong Wang, Rafael J Wysocki).

   - ACPICA update to upstream release 20140926, inlcuding mostly
     cleanups reducing differences between the upstream ACPICA and the
     kernel code, tools changes (acpidump, acpiexec) and support for the
     _DDN object (Bob Moore, Lv Zheng).

   - New PM QoS class for memory bandwidth from Tomeu Vizoso.

   - Default 32-bit DMA mask for platform devices enumerated by ACPI
     (this change is mostly needed for some drivers development in
     progress targeted at 3.19) from Heikki Krogerus.

   - ACPI EC driver cleanups, mostly related to debugging, from Lv
     Zheng.

   - cpufreq-dt driver updates from Thomas Petazzoni.

   - powernv cpuidle driver update from Preeti U Murthy"

* tag 'pm+acpi-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits)
  intel_pstate: Correct BYT VID values.
  intel_pstate: Fix BYT frequency reporting
  intel_pstate: Don't lose sysfs settings during cpu offline
  cpufreq: intel_pstate: Reflect current no_turbo state correctly
  cpufreq: expose scaling_cur_freq sysfs file for set_policy() drivers
  cpufreq: intel_pstate: Fix setting max_perf_pct in performance policy
  PCI / PM: handle failure to enable wakeup on PCIe PME
  ACPI: invoke acpi_device_wakeup() with correct parameters
  PM / freezer: Clean up code after recent fixes
  PM: convert do_each_thread to for_each_process_thread
  OOM, PM: OOM killed task shouldn't escape PM suspend
  freezer: remove obsolete comments in __thaw_task()
  freezer: Do not freeze tasks killed by OOM killer
  ACPI / platform: provide default DMA mask
  cpuidle: powernv: Populate cpuidle state details by querying the device-tree
  cpufreq: cpufreq-dt: adjust message related to regulators
  cpufreq: cpufreq-dt: extend with platform_data
  cpufreq: allow driver-specific data
  ACPI / EC: Cleanup coding style.
  ACPI / EC: Refine event/query debugging messages.
  ...
2014-10-24 11:29:31 -07:00
Linus Torvalds 8264fce6de Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
 "Sorry that I missed the merge window as there is a bug found in the
  last minute, and I have to fix it and wait for the code to be tested
  in linux-next tree for a few days.  Now the buggy patch has been
  dropped entirely from my next branch.  Thus I hope those changes can
  still be merged in 3.18-rc2 as most of them are platform thermal
  driver changes.

  Specifics:

   - introduce ACPI INT340X thermal drivers.

     Newer laptops and tablets may have thermal sensors and other
     devices with thermal control capabilities that are exposed for the
     OS to use via the ACPI INT340x device objects.  Several drivers are
     introduced to expose the temperature information and cooling
     ability from these objects to user-space via the normal thermal
     framework.

     From: Lu Aaron, Lan Tianyu, Jacob Pan and Zhang Rui.

   - introduce a new thermal governor, which just uses a hysteresis to
     switch abruptly on/off a cooling device.  This governor can be used
     to control certain fan devices that can not be throttled but just
     switched on or off.  From: Peter Feuerer.

   - introduce support for some new thermal interrupt functions on
     i.MX6SX, in IMX thermal driver.  From: Anson, Huang.

   - introduce tracing support on thermal framework.  From: Punit
     Agrawal.

   - small fixes in OF thermal and thermal step_wise governor"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits)
  Thermal: int340x thermal: select ACPI fan driver
  Thermal: int3400_thermal: use acpi_thermal_rel parsing APIs
  Thermal: int340x_thermal: expose acpi thermal relationship tables
  Thermal: introduce int3403 thermal driver
  Thermal: introduce INT3402 thermal driver
  Thermal: move the KELVIN_TO_MILLICELSIUS macro to thermal.h
  ACPI / Fan: support INT3404 thermal device
  ACPI / Fan: add ACPI 4.0 style fan support
  ACPI / fan: convert to platform driver
  ACPI / fan: use acpi_device_xxx_power instead of acpi_bus equivelant
  ACPI / fan: remove no need check for device pointer
  ACPI / fan: remove unused macro
  Thermal: int3400 thermal: register to thermal framework
  Thermal: int3400 thermal: add capability to detect supporting UUIDs
  Thermal: introduce int3400 thermal driver
  ACPI: add ACPI_TYPE_LOCAL_REFERENCE support to acpi_extract_package()
  ACPI: make acpi_create_platform_device() an external API
  thermal: step_wise: fix: Prevent from binary overflow when trend is dropping
  ACPI: introduce ACPI int340x thermal scan handler
  thermal: Added Bang-bang thermal governor
  ...
2014-10-24 11:21:43 -07:00
Lv Zheng 2f8572344e ACPICA: Events: Reduce source code difference for the ACPI_EVENT_FLAG_HANDLE renaming.
This patch is partial linuxized result of the following ACPICA commit:
  ACPICA commit: a73b66c6aa1846d055bb6390d9c9b9902f7d804d
  Subject: Add "has handler" flag to event/gpe status interfaces.
  This change adds a new flag, ACPI_EVENT_FLAGS_HAS_HANDLER to the
  acpi_get_event_status and acpi_get_gpe_status external interfaces. It
  is set if the event/gpe currently has a handler associated with it.
This patch contains the code to rename ACPI_EVENT_FLAG_HANDLE to
ACPI_EVENT_FLAG_HAS_HANDLER, and the corresponding updates of its usages.

Link: https://github.com/acpica/acpica/commit/a73b66c6
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-21 00:39:40 +02:00
Rafael J. Wysocki 9ef5a306ef Merge branches 'acpi-hotplug', 'acpi-scan', 'acpi-lpss', 'acpi-gpio' and 'acpi-video'
* acpi-hotplug:
  ACPI / hotplug: Generate online uevents for ACPI containers

* acpi-scan:
  ACPI / scan: Correct error return value of create_modalias()

* acpi-lpss:
  ACPI / platform / LPSS: disable async suspend/resume of LPSS devices

* acpi-gpio:
  gpio / ACPI: Use pin index and bit length
  ACPICA: Update to GPIO region handler interface.

* acpi-video:
  ACPI / video: disable native backlight for ThinkPad X201s
2014-09-25 22:59:30 +02:00
Mika Westerberg 98d28d0e59 ACPI / scan: Correct error return value of create_modalias()
There is a typo, it should be negative -errno instead.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-22 14:11:43 +02:00
Rafael J. Wysocki 8ab17fc92e ACPI / hotplug: Generate online uevents for ACPI containers
Commit 46394fd01 (ACPI / hotplug: Move container-specific code out of
the core) removed the generation of "online" uevents for containers,
because "add" uevents are now generated for them automatically when
container system devices are registered.  However, there are user
space tools that need to be notified when the container and all of
its children have been enumerated, which doesn't happen any more.

For this reason, add a mechanism allowing "online" uevents to be
generated for ACPI containers after enumerating the container along
with all of its children.

Fixes: 46394fd01 (ACPI / hotplug: Move container-specific code out of the core)
Reported-and-tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-21 02:58:18 +02:00
Zhang Rui 3230bbfce8 ACPI: introduce ACPI int340x thermal scan handler
Newer laptops and tablets that use ACPI may have thermal sensors and
other devices with thermal control capabilities outside the core CPU/SOC,
for thermal safety reasons.
They are exposed for the OS to use via
1) INT3400 ACPI device object as the master.
2) INT3401 ~ INT340B ACPI device objects as the slaves.

This patch introduces a scan handler to enumerate the INT3400
ACPI device object to platform bus, and prevent its slaves
from being enumerated before the controller driver being probed.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-09-11 23:35:15 +08:00
Yasuaki Ishimatsu a383b68d9f ACPI / scan: not cache _SUN value in struct acpi_device_pnp
The _SUN device indentification object is not guaranteed to return
the same value every time it is executed, so we should not cache its
return value, but rather execute it every time as needed.  If it is
cached, an incorrect stale value may be used in some situations.

This issue was exposed by commit 202317a573 (ACPI / scan: Add
acpi_device objects for all device nodes in the namespace).  Fix it
by avoiding to cache the return value of _SUN.

Fixes: 202317a573 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace)
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-03 22:41:14 +02:00
Lan Tianyu 236105db63 ACPI: Run fixed event device notifications in process context
Currently, notify callbacks for fixed button events are run from
interrupt context.  That is not necessary and after commit 0bf6368ee8
(ACPI / button: Add ACPI Button event via netlink routine) it causes
netlink routines to be called from interrupt context which is not
correct.

Also, that is different from non-fixed device events (including
non-fixed button events) whose notify callbacks are all executed from
process context.

For the above reasons, make fixed button device notify callbacks run
in process context which will avoid the deadlock when using netlink
to report button events to user space.

Fixes: 0bf6368ee8 (ACPI / button: Add ACPI Button event via netlink routine)
Link: https://lkml.org/lkml/2014/8/21/606
Reported-by: Benjamin Block <bebl@mageta.org>
Reported-by: Knut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
[rjw: Function names, subject and changelog.]
Cc: 3.15+ <stable@vger.kernel.org> # 3.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-26 01:29:24 +02:00
Rafael J. Wysocki fc2e0a8326 ACPI / scan: Allow ACPI drivers to bind to PNP device objects
We generally don't allow ACPI drivers to bind to ACPI device objects
that companion "physical" device objects are created for to avoid
situations in which two different drivers may attempt to handle one
device at the same time.  Recent ACPI device enumeration rework
extended that approach to ACPI PNP devices by starting to use a scan
handler for enumerating them.  However, we previously allowed ACPI
drivers to bind to ACPI device objects with existing PNP device
companions and changing that led to functional regressions on some
systems.

For this reason, add a special check for PNP devices in
acpi_device_probe() so that ACPI drivers can bind to ACPI device
objects having existing PNP device companions as before.

Fixes: eec15edbb0 (ACPI / PNP: use device ID list for PNPACPI device enumeration)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=81511
Link: https://bugzilla.kernel.org/show_bug.cgi?id=81971
Reported-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Reported-by: Dirk Griesbach <spamthis@freenet.de>
Cc: 3.16+ <stable@vger.kernel.org> # 3.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-26 01:29:21 +02:00
Rafael J. Wysocki 21c806d9b1 Merge branches 'acpi-processor', 'acpi-hotplug' and 'acpi-battery'
* acpi-processor:
  ACPI / processor: Make acpi_cpu_soft_notify() process CPU FROZEN events

* acpi-hotplug:
  ACPI / hotplug: Check scan handlers in acpi_scan_hot_remove()

* acpi-battery:
  ACPI / battery: Fix warning message in acpi_battery_get_state()
2014-08-10 16:23:33 +02:00
Tang Chen dee1592638 ACPI / hotplug: Check scan handlers in acpi_scan_hot_remove()
When ACPI_HOTPLUG_MEMORY is not configured, memory_device_handler.attach
is not set.  In acpi_scan_attach_handler(), the acpi_device->handler will
not be initialized.

In acpi_scan_hot_remove(), it doesn't check if acpi_device->handler is NULL.
If we do memory hot-remove without ACPI_HOTPLUG_MEMORY configured, the kernel
will panic.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000088
 IP: [<ffffffff813e318f>] acpi_device_hotplug+0x1d7/0x4c4
 PGD 0
 Oops: 0000 [#1] SMP
 Modules linked in: sd_mod(E) sr_mod(E) cdrom(E) crc_t10dif(E) crct10dif_common(E) ata_piix(E) libata(E)
 CPU: 0 PID: 41 Comm: kworker/u2:1 Tainted: G            E 3.16.0-rc7--3.16-rc7-tangchen+ #20
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
 Workqueue: kacpi_hotplug acpi_hotplug_work_fn
 task: ffff8800182436c0 ti: ffff880018254000 task.ti: ffff880018254000
 RIP: 0010:[<ffffffff813e318f>]  [<ffffffff813e318f>] acpi_device_hotplug+0x1d7/0x4c4
 RSP: 0000:ffff880018257da8  EFLAGS: 00000246
 RAX: 0000000000000000 RBX: ffff88001cd8d800 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff88001e40e6f8 RDI: 0000000000000246
 RBP: ffff880018257df0 R08: 0000000000000096 R09: 00000000000011a0
 R10: 63735f6970636120 R11: 725f746f685f6e61 R12: 0000000000000003
 R13: ffff88001cc1c400 R14: ffff88001e062028 R15: 0000000000000040
 FS:  0000000000000000(0000) GS:ffff88001e400000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 0000000000000088 CR3: 000000001a9a2000 CR4: 00000000000006f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000
 Stack:
  00000000523cab58 ffff88001cd8d9f8 ffff88001852d480 00000000523cab58
  ffff88001852d480 ffff880018221e40 ffff88001cc1c400 ffff88001cce2d00
  0000000000000040 ffff880018257e08 ffffffff813dc31d ffff88001852d480
 Call Trace:
  [<ffffffff813dc31d>] acpi_hotplug_work_fn+0x1e/0x29
  [<ffffffff8108eefb>] process_one_work+0x17b/0x460
  [<ffffffff8108f69d>] worker_thread+0x11d/0x5b0
  [<ffffffff8108f580>] ? rescuer_thread+0x3a0/0x3a0
  [<ffffffff81096811>] kthread+0xe1/0x100
  [<ffffffff81096730>] ? kthread_create_on_node+0x1a0/0x1a0
  [<ffffffff816cc6bc>] ret_from_fork+0x7c/0xb0
  [<ffffffff81096730>] ? kthread_create_on_node+0x1a0/0x1a0

This patch fixes this problem by checking if acpi_device->handler is NULL
in acpi_scan_hot_remove().

Fixes: d22ddcbc4f (ACPI / hotplug: Add demand_offline hotplug profile flag)
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-07 21:16:23 +02:00
Rafael J. Wysocki e5e0243e36 Merge branches 'acpi-video' and 'acpi-hotplug'
* acpi-video:
  ACPI: move models with win8 brightness problems from win8 blacklist to use_native_backlight
  ACPI / video: Fix backlight taking 2 steps on a brightness up/down keypress

* acpi-hotplug:
  ACPI / hotplug / PCI: Fix sparse non static symbol warning
  ACPI / hotplug: Simplify acpi_set_hp_context()
  ACPI / hotplug / PCI: Eliminate acpiphp_dev_to_bridge()
2014-07-27 23:55:54 +02:00
Rafael J. Wysocki bd9b2f9aff ACPI / scan: No implicit wake notification for buttons
The ACPI device enumeration code in Linux assumes that buttons always
are wakeup devices, so it calls acpi_setup_gpe_for_wake() for them
which leads to undesirable side effects.  Namely, that function sets
up implicit device wake notification mechanism for a given GPE if
there is no handler method in the ACPI namespace, which from the
ACPICA's perspective means that there always is a way to handle
that GPE if enabled.  However, we don't handle wake notify events
for buttons, so if there are no handler methods for their GPEs in
the namespace, enabling a button GPE at run time leads to a GPE
storm in some cases (the GPE triggers, ACPICA carries out the
implicit wake notification for it which isn't handled, so the
GPE triggers again and so on).

To prevent that from happening use acpi_mark_gpe_for_wake()
instead of acpi_setup_gpe_for_wake() for buttons which will cause
ACPICA to only enable button GPEs if there are handler methods for
the in the namespace.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-23 23:13:19 +02:00
Rafael J. Wysocki ba574dc856 ACPI / hotplug: Simplify acpi_set_hp_context()
Since all of the acpi_set_hp_context() callers pass at least one NULL
function pointer and one caller passes NULL function pointers only
to it, drop function pointer arguments from acpi_set_hp_context()
and make the callers initialize the function pointers in struct
acpi_hotplug_context by themselves before passing it to
acpi_set_hp_context().

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-16 01:45:40 +02:00
Rafael J. Wysocki b04c58b1ed Merge branch 'acpi-enumeration'
* acpi-enumeration:
  ACPI / scan: use platform bus type by default for _HID enumeration
  ACPI / scan: always register ACPI LPSS scan handler
  ACPI / scan: always register memory hotplug scan handler
  ACPI / scan: always register container scan handler
  ACPI / scan: Change the meaning of missing .attach() in scan handlers
  ACPI / scan: introduce platform_id device PNP type flag
  ACPI / scan: drop unsupported serial IDs from PNP ACPI scan handler ID list
  ACPI / scan: drop IDs that do not comply with the ACPI PNP ID rule
  ACPI / PNP: use device ID list for PNPACPI device enumeration
  ACPI / scan: .match() callback for ACPI scan handlers
2014-06-03 23:12:20 +02:00
Rafael J. Wysocki a392f7d4af Merge branch 'acpi-pm'
* acpi-pm:
  ACPI / PM: Export rest of the subsys PM callbacks
  ACPI / PM: Avoid resuming devices in ACPI PM domain during system suspend
  ACPI / PM: Hold ACPI scan lock over the "freeze" sleep state
  ACPI / PM: Export acpi_target_system_state() to modules
2014-06-03 23:11:42 +02:00
Zhang Rui 48459340b9 ACPI / scan: use platform bus type by default for _HID enumeration
Because of the growing demand for enumerating ACPI devices to
platform bus, change the code to enumerate ACPI device objects to
platform bus by default.  Namely, create platform devices for the
ACPI device objects that
 1. Have pnp.type.platform_id set (device objects with _HID currently).
 2. Do not have a scan handler attached.
 3. Are not SPI/I2C slave devices (that should be enumerated to the
    appropriate buses bus by their parent).

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[rjw: Subject and changelog, rebase and code cleanup]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 16:04:37 +02:00
Rafael J. Wysocki d34afa9de4 ACPI / scan: Change the meaning of missing .attach() in scan handlers
Currently, some scan handlers can be compiled out entirely, which
leaves the device objects they normally attach to without a scan
handler.  This isn't a problem as long as we don't have any default
enumeration mechanism that applies to all devices without a scan
handler.  However, if such a default enumeration is added, it still
should not be applied to devices that are normally attached to by
scan handlers, because that may result in creating "physical" device
objects of a wrong type for them.

Since we are going to create platform device objects for all ACPI
device objects with pnp.type.platform_id set by default, clear
pnp.type.platform_id where there is a matching scan handler without
an .attach() callback and otherwise simply treat that scan handler
as though the .attach() callback was present but always returned 0.

This will allow us to compile out scan handler callbacks and leave
the device ID lists used by them so as to prevent creating platform
device objects for the matching ACPI devices.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 16:04:36 +02:00
Rafael J. Wysocki 549e68455c ACPI / scan: introduce platform_id device PNP type flag
Only certain types of ACPI device objects can be enumerated as
platform devices, so in order to distinguish them from the others
introduce a new ACPI device PNP type flag, platform_id, and set it
for devices with a valid _HID to start with.

This change is based on a Zhang Rui's prototype.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 16:04:36 +02:00
Zhang Rui eec15edbb0 ACPI / PNP: use device ID list for PNPACPI device enumeration
ACPI can be used to enumerate PNP devices, but the code does not
handle this in the right way currently.  Namely, if an ACPI device
object
 1. Has a _CRS method,
 2. Has an identification of
    "three capital characters followed by four hex digits",
 3. Is not in the excluded IDs list,
it will be enumerated to PNP bus (that is, a PNP device object will
be create for it).  This means that, actually, the PNP bus type is
used as the default bus type for enumerating _HID devices in ACPI.

However, more and more _HID devices need to be enumerated to the
platform bus instead (that is, platform device objects need to be
created for them).  As a result, the device ID list in acpi_platform.c
is used to enforce creating platform device objects rather than PNP
device objects for matching devices.  That list has been continuously
growing recently, unfortunately, and it is pretty much guaranteed to
grow even more in the future.

To address that problem it is better to enumerate _HID devices
as platform devices by default.  To this end, change the way of
enumerating PNP devices by adding a PNP ACPI scan handler that
will use a device ID list to create PNP devices for the ACPI
device objects whose device IDs are present in that list.

The initial device ID list in the PNP ACPI scan handler contains
all of the pnp_device_id strings from all the existing PNP drivers,
so this change should be transparent to the PNP core and all of the
PNP drivers.  Still, in the future it should be possible to reduce
its size by converting PNP drivers that need not be PNP for any
technical reasons into platform drivers.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[rjw: Rewrote the changelog, modified the PNP ACPI scan handler code]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 16:04:35 +02:00
Rafael J. Wysocki aca0a4eb4e ACPI / scan: .match() callback for ACPI scan handlers
Introduce a .match() callback for ACPI scan handlers to allow them to
use more elaborate matching algorithms if necessary.  That is needed
for the upcoming PNP scan handler in particular.

This change is based on a Zhang Rui's prototype.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 16:04:35 +02:00
Rafael J. Wysocki f25c0ae2b4 ACPI / PM: Avoid resuming devices in ACPI PM domain during system suspend
Rework the ACPI PM domain's PM callbacks to avoid resuming devices
during system suspend (in order to modify their wakeup settings etc.)
if that isn't necessary.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-20 13:22:48 +02:00
Aaron Lu 2650ef4263 ACPI / scan: do not scan fixed hardware on HW-reduced platform
Fixed hardware does not exist on HW-reduced ACPI platforms since the
programming interface for them is not implemented on them, so no need
to scan that hardware on them.

This patch avoids creating the fixed power button ACPI device and
eliminates a probe error message from ACPI button driver on ASUS T100.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-28 12:16:53 +02:00
Rafael J. Wysocki 165f5fd04a Merge branches 'pm-qos', 'pm-domains' and 'pm-drivers'
* pm-qos:
  PM / QoS: Add type to dev_pm_qos_add_ancestor_request() arguments
  ACPI / LPSS: Support for device latency tolerance PM QoS
  ACPI / scan: Add bind/unbind callbacks to struct acpi_scan_handler
  PM / QoS: Introcuce latency tolerance device PM QoS type
  PM / QoS: Add no_constraints_value field to struct pm_qos_constraints
  PM / QoS: Rename device resume latency QoS items

* pm-domains:
  PM / domains: Turn latency warning into debug message

* pm-drivers:
  PM: Add pm_runtime_suspend|resume_force functions
  PM / runtime: Fetch runtime PM callbacks using a macro
2014-03-20 13:25:36 +01:00
Rafael J. Wysocki 2eb060975d Merge branch 'acpi-ost'
* acpi-ost:
  ACPI: Drop acpi_evaluate_hotplug_ost() and ACPI_HOTPLUG_OST
  ACPI: use device name LNXSYBUS.xx for ACPI \_SB and \_TZ objects
  ACPI / processor: use acpi_evaluate_ost() to replace open-coded version
  ACPI / PAD / xen: use acpi_evaluate_ost() to replace open-coded version
  ACPI / PAD: use acpi_evaluate_ost() to replace open-coded version
  ACPI: rename acpi_evaluate_hotplug_ost() to acpi_evaluate_ost()
2014-03-17 13:48:18 +01:00
Rafael J. Wysocki 1e3bcb596c ACPI / hotplug: Rework deferred execution of acpi_device_hotplug()
Since the only function executed by acpi_hotplug_execute() is
acpi_device_hotplug() and it only is called by the ACPI core,
simplify its definition so that it only takes two arguments, the
ACPI device object pointer and event code, rename it to
acpi_hotplug_schedule() and move its header from acpi_bus.h to
the ACPI core's internal header file internal.h.  Modify the
definition of acpi_device_hotplug() so that its first argument is
an ACPI device object pointer and modify the definition of
struct acpi_hp_work accordingly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2014-03-05 01:26:35 +01:00
Rafael J. Wysocki 700b8422fb ACPI: Drop acpi_evaluate_hotplug_ost() and ACPI_HOTPLUG_OST
Replace acpi_evaluate_hotplug_ost() with acpi_evaluate_ost()
everywhere and drop the ACPI_HOTPLUG_OST symbol so that hotplug
_OST is supported unconditionally.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2014-02-22 00:50:49 +01:00
Rafael J. Wysocki 5d5132059a ACPI / ATA: Add hotplug contexts to ACPI companions of SATA devices
Modify the SATA subsystem to add hotplug contexts to ACPI companions
of SATA devices and ports instead of registering special ACPI dock
operations using register_hotplug_dock_device().

That change will allow the entire code handling those special ACPI
dock operations to be dropped in the next commit.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
2014-02-22 00:48:31 +01:00
Rafael J. Wysocki be27b3dcb0 ACPI / dock: Add .uevent() callback to struct acpi_hotplug_context
In order to avoid the need to register special ACPI dock
operations for SATA devices add a .uevent() callback pointer to
struct acpi_hotplug_context and make dock_hotplug_event() use that
callback if available.  Also rename the existing .event() callback
in struct acpi_hotplug_context to .notify() to avoid possible
confusion in the future.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-21 01:10:27 +01:00
Rafael J. Wysocki 2bd74d91b1 Merge branch 'acpi-pci-hotplug' into acpi-ost 2014-02-21 01:06:58 +01:00
Jiang Liu ae3caa80a5 ACPI: use device name LNXSYBUS.xx for ACPI \_SB and \_TZ objects
Use device name "LNXSYBUS:xx" instead  of "device.xx" for ACPI objects
\_SB and \_TZ.

BTW, the original check of "handle == ACPI_ROOT_OBJECT" in statment
"else if (list_empty(&pnp->ids) && handle == ACPI_ROOT_OBJECT)"
is always false because of the code at the begin of that block.
                if (handle == ACPI_ROOT_OBJECT) {
                        acpi_add_id(pnp, ACPI_SYSTEM_HID);
                        break;
                }

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-21 00:27:48 +01:00
Rafael J. Wysocki b43109fa46 ACPI / dock: Pass ACPI device pointer to acpi_device_is_battery()
Since we already know what the device's PNP IDs are when
acpi_device_is_battery() is called, it is not necessary to run
acpi_get_object_info() for the device in that function.  Instead, if
acpi_device_is_battery() is passed a pointer to a struct acpi_device
object, it can use the list of PNP IDs from that object, so make that
happen and modify the function's header accordingly

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-16 01:51:15 +01:00
Rafael J. Wysocki 1e2380cd14 ACPI / dock: Dispatch dock notifications from the global notify handler
The ACPI dock station code carries out an extra namespace scan
before the main one in order to find and register all of the dock
device objects.  Then, it registers a notify handler for each of
them for handling dock events.

However, dock device objects need not be scanned for upfront.  They
very well can be enumerated and registered during the first phase
of the main namespace scan, before attaching scan handlers and ACPI
drivers to ACPI device objects.  Then, the dependent devices can be
added to the in the second phase.  That makes it possible to drop
the extra namespace scan, so do it.

Moreover, it is not necessary to register notify handlers for all
of the dock stations' namespace nodes, becuase notifications may
be dispatched from the global notify handler for them.  Do that and
drop two functions used for dock notify handling, acpi_dock_deferred_cb()
and dock_notify_handler(), that aren't necessary any more.

Finally, some dock station objects have _HID objects matching the
ACPI container scan handler which causes it to claim those objects
and try to handle their hotplug, but that is not a good idea,
because those objects have their own special hotplug handling anyway.
For this reason, the hotplug_notify flag should not be set for ACPI
device objects representing dock stations and the container scan
handler should be made ignore those objects, so make that happen.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-16 01:51:01 +01:00
Rafael J. Wysocki 9cb32acf09 ACPI / scan: Add bind/unbind callbacks to struct acpi_scan_handler
In some cases it may be necessary to perform certain setup/cleanup
operations on a device object representing a physical device after
it has been associated with an ACPI companion by acpi_bind_one() or
before disassociating it from that companion by acpi_unbind_one(),
respectively.  If there is a struct acpi_bus_type object for the
given device's bus type, the .setup()/.cleanup() callbacks from there
are executed for these purposes.  However, an analogous mechanism will
be necessary for devices whose bus types don't have corresponding
struct acpi_bus_type objects and that have specific ACPI scan handlers.

For those devices, add new .bind() and .unbind() callbacks to struct
acpi_scan_handler that will be executed by acpi_platform_notify()
right after the given device has been associated with an ACPI
comapnion and by acpi_platform_notify_remove() right before calling
acpi_unbind_one() for that device, respectively.

To make that work for scan handlers registering new devices in their
.attach() callbacks, modify acpi_scan_attach_handler() to set the
ACPI device object's handler field before calling .attach() from the
scan handler at hand.

This changeset includes a fix from Mika Westerberg.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-11 00:35:46 +01:00
Rafael J. Wysocki 1a699476e2 ACPI / hotplug / PCI: Hotplug notifications from acpi_bus_notify()
Since acpi_bus_notify() is executed on all notifications for all
devices anyway, make it execute acpi_device_hotplug() for all
hotplug events instead of installing notify handlers pointing to
the same function for all hotplug devices.

This change reduces both the size and complexity of ACPI-based device
hotplug code.  Moreover, since acpi_device_hotplug() only does
significant things for devices that have either an ACPI scan handler,
or a hotplug context with .eject() defined, and those devices
had notify handlers pointing to acpi_hotplug_notify_cb() installed
before anyway, this modification shouldn't change functionality.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-06 17:31:52 +01:00
Rafael J. Wysocki 5e6f236c26 ACPI / hotplug / PCI: Simplify acpi_install_hotplug_notify_handler()
Since acpi_hotplug_notify_cb() does not use its data argument any
more, the second argument of acpi_install_hotplug_notify_handler()
can be dropped, so do that and update its callers accordingly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-06 17:31:51 +01:00
Rafael J. Wysocki dd2151be28 ACPI / hotplug / PCI: Rework the handling of eject requests
To avoid the need to install a hotplug notify handler for each ACPI
namespace node representing a device and having a matching scan
handler, move the check whether or not the ejection of the given
device is enabled through its scan handler from acpi_hotplug_notify_cb()
to acpi_generic_hotplug_event().  Also, move the execution of
ACPI_OST_SC_EJECT_IN_PROGRESS _OST to acpi_generic_hotplug_event(),
because in acpi_hotplug_notify_cb() or in acpi_eject_store() we really
don't know whether or not the eject is going to be in progress (for
example, acpi_hotplug_execute() may still fail without queuing up the
work item).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-02-06 17:31:51 +01:00
Rafael J. Wysocki 3c2cc7ff9e ACPI / hotplug / PCI: Consolidate ACPIPHP with ACPI core hotplug
The ACPI-based PCI hotplug (ACPIPHP) code currently attaches its
hotplug context objects directly to ACPI namespace nodes representing
hotplug devices.  However, after recent changes causing struct
acpi_device to be created for every namespace node representing a
device (regardless of its status), that is not necessary any more.
Moreover, it's vulnerable to the theoretical issue that the ACPI
handle passed in the context between handle_hotplug_event() and
hotplug_event_work() may become invalid in the meantime (as a
result of a concurrent table unload).

In principle, this issue might be addressed by adding a non-empty
release handler for ACPIPHP hotplug context objects analogous to
acpi_scan_drop_device(), but that would duplicate the code in that
function and in acpi_device_del_work_fn().  For this reason, it's
better to modify ACPIPHP to attach its device hotplug contexts to
struct device objects representing hotplug devices and make it
use acpi_hotplug_notify_cb() as its notify handler.  At the same
time, acpi_device_hotplug() can be modified to dispatch the new
.hp.event() callback pointing to acpiphp_hotplug_event() from ACPI
device objects associated with PCI devices or use the generic
ACPI device hotplug code for device objects with matching scan
handlers.

This allows the existing code duplication between ACPIPHP and the
ACPI core to be reduced too and makes further ACPI-based device
hotplug consolidation possible.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-06 17:31:37 +01:00
Rafael J. Wysocki e525506fcb ACPI / hotplug / PCI: Define hotplug context lock in the core
Subsequent changes will require the ACPI core to acquire the lock
protecting the ACPIPHP hotplug contexts, so move the definition of
the lock to the core and change its name to be more generic.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-02-05 17:41:26 +01:00
Rafael J. Wysocki 78ea4639a7 ACPI / hotplug: Fix potential race in acpi_bus_notify()
There is a slight possibility for the ACPI device object pointed to
by adev in acpi_hotplug_notify_cb() to become invalid between the
acpi_bus_get_device() that it comes from and the subsequent dereference
of that pointer under get_device().  Namely, if acpi_scan_drop_device()
runs in parallel with acpi_hotplug_notify_cb(), acpi_device_del_work_fn()
queued up by it may delete the device object in question right after
a successful execution of acpi_bus_get_device() in acpi_bus_notify().

An analogous problem is present in acpi_bus_notify() where the device
pointer coming from acpi_bus_get_device() may become invalid before
it subsequent dereference in the "if" block.

To prevent that from happening, introduce a new function,
acpi_bus_get_acpi_device(), working analogously to acpi_bus_get_device()
except that it will grab a reference to the ACPI device object returned
by it and it will do that under the ACPICA's namespace mutex.  Then,
make both acpi_hotplug_notify_cb() and acpi_bus_notify() use
acpi_bus_get_acpi_device() instead of acpi_bus_get_device() so as to
ensure that the pointers used by them will not become stale at one
point.

In addition to that, introduce acpi_bus_put_acpi_device() as a wrapper
around put_device() to be used along with acpi_bus_get_acpi_device()
and make the (new) users of the latter use acpi_bus_put_acpi_device()
too.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-02-05 17:41:18 +01:00
Toshi Kani 8fcfb99c8e ACPI / hotplug: Fix panic on eject to ejected device
When an eject request is sent to an ejected ACPI device, the following
panic occurs:

 ACPI: \_SB_.SCK3.CPU3: ACPI_NOTIFY_EJECT_REQUEST event
 BUG: unable to handle kernel NULL pointer dereference at 0000000000000070
 IP: [<ffffffff813a7cfe>] acpi_device_hotplug+0x10b/0x33b
	:
 Call Trace:
 [<ffffffff813a24da>] acpi_hotplug_work_fn+0x1c/0x27
 [<ffffffff8109cbe5>] process_one_work+0x175/0x430
 [<ffffffff8109d7db>] worker_thread+0x11b/0x3a0

This is becase device->handler is NULL in acpi_device_hotplug().
This case was used to fail in acpi_hotplug_notify_cb() as the target
had no acpi_deivce.  However, acpi_device now exists after ejection.

Added a check to verify if acpi_device->handler is valid for an
eject request in acpi_hotplug_notify_cb().  Note that handler passed
from an argument is still valid while acpi_device->handler is NULL.

Fixes: 202317a573 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace)
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-05 12:14:43 +01:00
Rafael J. Wysocki 82e180598b Merge branches 'acpi-processor', 'acpi-hotplug', 'acpi-init', 'acpi-pm' and 'acpica'
* acpi-processor:
  ACPI / scan: reduce log level of "ACPI: \_PR_.CPU4: failed to get CPU APIC ID"
  ACPI / processor: Return specific error value when mapping lapic id

* acpi-hotplug:
  ACPI / scan: Clear match_driver flag in acpi_bus_trim()

* acpi-init:
  ACPI / init: Flag use of ACPI and ACPI idioms for power supplies to regulator API

* acpi-pm:
  ACPI / PM: Use ACPI_COMPANION() to get ACPI companions of devices

* acpica:
  ACPICA: Remove bool usage from ACPICA.
2014-01-29 11:47:18 +01:00
Rafael J. Wysocki a951c773bc ACPI / scan: Clear match_driver flag in acpi_bus_trim()
Drivers should not bind to struct acpi_device objects that
acpi_bus_trim() has been called for, so make that function
clear flags.match_driver for those objects.

If that is not done, an ACPI driver may theoretically try to operate
a device that is not physically present.

Fixes: 202317a573 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2014-01-29 11:40:43 +01:00
Rafael J. Wysocki bc411b8a64 Merge branch 'acpi-modules'
* acpi-modules:
  platform: introduce OF style 'modalias' support for platform bus
  ACPI: fix module autoloading for ACPI enumerated devices
  ACPI: add module autoloading support for ACPI enumerated devices
  ACPI: fix create_modalias() return value handling
2014-01-17 01:59:38 +01:00
Zhang Rui 6eb2451f7c ACPI: add module autoloading support for ACPI enumerated devices
An ACPI enumerated device may have its compatible id strings.

To support the compatible ACPI ids (acpi_device->pnp.ids),
we introduced acpi_driver_match_device() to match
the driver->acpi_match_table and acpi_device->pnp.ids.

For those drivers, MODULE_DEVICE_TABLE(acpi, xxx) is used to
exports the driver module alias in the format of
"acpi:device_compatible_ids".
But in the mean time, the current code does not export the
ACPI compatible strings as part of the module_alias for the
ACPI enumerated devices, which will break the module autoloading.

Take the following piece of code for example,
static const struct acpi_device_id xxx_acpi_match[] = {
        { "INTABCD", 0 },
        { }
};
MODULE_DEVICE_TABLE(acpi, xxx_acpi_match);

If this piece of code is used in a platform driver for
an ACPI enumerated platform device, the platform driver module_alias
is "acpi:INTABCD", but the uevent attribute of its platform device node
is "platform:INTABCD:00" (PREFIX:platform_device->name).
If this piece of code is used in an i2c driver for an ACPI enumerated
i2c device, the i2c driver module_alias is "acpi:INTABCD", but
the uevent of its i2c device node is "i2c:INTABCD:00" (PREFIX:i2c_client->name).
If this piece of code is used in an spi driver for an ACPI enumerated
spi device, the spi driver module_alias is "acpi:INTABCD", but
the uevent of its spi device node is "spi:INTABCD" (PREFIX:spi_device->modalias).

The reason why the module autoloading is not broken for now is that
the uevent file of the ACPI device node is "acpi:INTABCD".
Thus it is the ACPI device node creation that loads the platform/i2c/spi driver.

So this is a problem that will affect us the day when the ACPI bus
is removed from device model.

This patch introduces two new APIs,
one for exporting ACPI ids in uevent MODALIAS field,
and another for exporting ACPI ids in device' modalias sysfs attribute.

For any bus that supports ACPI enumerated devices, it needs to invoke
these two functions for their uevent and modalias attribute.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-16 23:10:40 +01:00
Zhang Rui 3d8e00909d ACPI: fix create_modalias() return value handling
Currently, create_modalias() handles the output truncated case in
an improper way (return -EINVAL).
Plus, acpi_device_uevent() and acpi_device_modalias_show() do
improper check for the create_modalias() return value as well.

This patch fixes create_modalias() to
return -EINVAL if there is an output error,
return -ENOMEM if the output is truncated,
and also fixes both acpi_device_uevent() and acpi_device_modalias_show()
to do proper return value check.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-16 23:06:42 +01:00
Srinivas Pandruvada c713cd7f2d ACPI / scan: ACPI device object sysfs attribute for _STA evaluation
This patch adds a "status" attribute for an ACPI device. This status
attribute shows the value of the _STA object. The _STA object returns
current status of an ACPI device: enabled, disabled, functioning,
present.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-11 01:53:13 +01:00
Rafael J. Wysocki caa73ea158 ACPI / hotplug / driver core: Handle containers in a special way
ACPI container devices require special hotplug handling, at least
on some systems, since generally user space needs to carry out
system-specific cleanup before it makes sense to offline devices in
the container.  However, the current ACPI hotplug code for containers
first attempts to offline devices in the container and only then it
notifies user space of the container offline.

Moreover, after commit 202317a573 (ACPI / scan: Add acpi_device
objects for all device nodes in the namespace), ACPI device objects
representing containers are present as long as the ACPI namespace
nodes corresponding to them are present, which may be forever, even
if the container devices are physically detached from the system (the
return values of the corresponding _STA methods change in those
cases, but generally the namespace nodes themselves are still there).
Thus it is useful to introduce entities representing containers that
will go away during container hot-unplug.

The goal of this change is to address both the above issues.

The idea is to create a "companion" container system device for each
of the ACPI container device objects during the initial namespace
scan or on a hotplug event making the container present.  That system
device will be unregistered on container removal.  A new bus type
for container devices is added for this purpose, because device
offline and online operations need to be defined for them.  The
online operation is a trivial function that is always successful
and the offline uses a callback pointed to by the container device's
offline member.

For ACPI containers that callback simply walks the list of ACPI
device objects right below the container object (its children) and
checks if all of their physical companion devices are offline.  If
that's not the case, it returns -EBUSY and the container system
devivce cannot be put offline.  Consequently, to put the container
system device offline, it is necessary to put all of the physical
devices depending on its ACPI companion object offline beforehand.

Container system devices created for ACPI container objects are
initially online.  They are created by the container ACPI scan
handler whose hotplug.demand_offline flag is set.  That causes
acpi_scan_hot_remove() to check if the companion container system
device is offline before attempting to remove an ACPI container or
any devices below it.  If the check fails, a KOBJ_CHANGE uevent is
emitted for the container system device in question and user space
is expected to offline all devices below the container and the
container itself in response to it.  Then, user space can finalize
the removal of the container with the help of its ACPI device
object's eject attribute in sysfs.

Tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-29 15:25:48 +01:00
Rafael J. Wysocki d22ddcbc4f ACPI / hotplug: Add demand_offline hotplug profile flag
Add a new ACPI hotplug profile flag, demand_offline, such that if
set for the given ACPI device object's scan handler, it will cause
acpi_scan_hot_remove() to check if that device object's physical
companions are offline upfront and fail the hot removal if that
is not the case.

That flag will be useful to overcome a problem with containers on
some system where they can only be hot-removed after some cleanup
operations carried out by user space, which needs to be notified
of the container hot-removal before the kernel attempts to offline
devices in the container.  In those cases the current implementation
of acpi_scan_hot_remove() is not sufficient, because it first tries
to offline the devices in the container and only if that is
suffcessful it tries to offline the container itself.  As a result,
the container hot-removal notification is not delivered to user space
at the right time.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-29 15:25:35 +01:00
Rafael J. Wysocki 9ccad66f01 Merge branch 'acpi-cleanup' into acpi-hotplug
Conflicts:
	drivers/acpi/scan.c
2013-12-07 01:05:17 +01:00
Lv Zheng 8b48463f89 ACPI: Clean up inclusions of ACPI header files
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and
<acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h>
inclusions and remove some inclusions of those files that aren't
necessary.

First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>
should not be included directly from any files that are built for
CONFIG_ACPI unset, because that generally leads to build warnings about
undefined symbols in !CONFIG_ACPI builds.  For CONFIG_ACPI set,
<linux/acpi.h> includes those files and for CONFIG_ACPI unset it
provides stub ACPI symbols to be used in that case.

Second, there are ordering dependencies between those files that always
have to be met.  Namely, it is required that <acpi/acpi_bus.h> be included
prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the
latter depends on are always there.  And <acpi/acpi.h> which provides
basic ACPICA type declarations should always be included prior to any other
ACPI headers in CONFIG_ACPI builds.  That also is taken care of including
<linux/acpi.h> as appropriate.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff)
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-07 01:03:14 +01:00
Rafael J. Wysocki 434a438af2 Merge branches 'acpi-hotplug', 'acpi-sysfs' and 'acpi-sleep'
* acpi-hotplug:
  ACPI / hotplug: Fix conflicted PCI bridge notify handlers

* acpi-sysfs:
  ACPI / sysfs: Fix incorrect ACPI tables walk in acpi_tables_sysfs_init()
  ACPI / sysfs: Set file size for each exposed ACPI table

* acpi-sleep:
  ACPI / sleep: clean up compiler warning about uninitialized field
2013-11-25 22:30:30 +01:00
Rafael J. Wysocki 2c22e6520a ACPI / scan: Use direct recurrence for device hierarchy walks
Rework acpi_bus_trim() and acpi_bus_device_attach(), which is
renamed as acpi_bus_attach(), to walk the list of each device
object's children directly and call themselves recursively for
each child instead of using acpi_walk_namespace().  This
simplifies the code quite a bit and avoids the overhead of
callbacks and the ACPICA's internal processing which are not
really necessary for these two routines.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-25 00:52:21 +01:00
Rafael J. Wysocki 25db115b0b ACPI: Introduce acpi_set_device_status()
Introduce a static inline function for setting the status field
of struct acpi_device on the basis of a supplied u32 number,
acpi_set_device_status(), and use it instead of the horrible
horrible STRUCT_TO_INT() macro wherever applicable.  Having done
that, drop STRUCT_TO_INT() (and pretend that it has never existed).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-22 21:56:06 +01:00
Rafael J. Wysocki 443fc82022 ACPI / hotplug: Rework generic code to handle suprise removals
The generic ACPI hotplug code used for several types of device
doesn't handle surprise removals, mostly because those devices
currently cannot be removed by surprise in the majority of systems.
However, surprise removals should be handled by that code as well
as surprise additions of devices, so make it do that.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-22 21:55:43 +01:00
Rafael J. Wysocki 46394fd017 ACPI / hotplug: Move container-specific code out of the core
Move container-specific uevents from the core hotplug code to the
container scan handler's .attach() and .detach() callbacks.

This way the core will not have to special-case containers and
the uevents will be guaranteed to happen every time a container
is either scanned or trimmed as appropriate.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-22 21:55:32 +01:00
Rafael J. Wysocki 3338db0057 ACPI / hotplug: Make ACPI PCI root hotplug use common hotplug code
Rework the common ACPI device hotplug code so that it is suitable
for PCI host bridge hotplug and switch the PCI host bridge scan
handler to using the common hotplug code.

This allows quite a few lines of code that are not necessary any more
to be dropped from the PCI host bridge scan handler and removes
arbitrary differences in behavior between PCI host bridge hotplug
and ACPI-based hotplug of other components, like CPUs and memory.

Also acpi_device_hotplug() can be static now.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-22 21:55:20 +01:00
Rafael J. Wysocki c27b2c33b6 ACPI / hotplug: Introduce common hotplug function acpi_device_hotplug()
Modify the common ACPI device hotplug code to always queue up the
same function, acpi_device_hotplug(), using acpi_hotplug_execute()
and make the PCI host bridge hotplug code use that function too for
device hot removal.

This allows some code duplication to be reduced and a race condition
where the relevant ACPI handle may become invalid between the
notification handler and the function queued up by it via
acpi_hotplug_execute() to be avoided.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-22 21:55:07 +01:00
Rafael J. Wysocki 1ceaba05b4 ACPI / hotplug: Do not fail bus and device checks for disabled hotplug
If the scan handler for the given device has hotplug.enabled
unset, it doesn't really make sense to fail bus check and device
check notifications.

First, bus check may not have anything to do with the device it is
signaled for, but it may concern another device on the bus below
this one.  For this reason, bus check notifications should not be
failed if hotplug is disabled for the target device.

Second, device check notifications are signaled only after a device
has already appeared (or disappeared), so failing it can only prevent
scan handlers and drivers from attaching to that (already existing)
device, which is not very useful.

Consequently, if device hotplug is disabled through the device's
scan handler, fail eject request notifications only.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-22 21:54:52 +01:00
Rafael J. Wysocki 202317a573 ACPI / scan: Add acpi_device objects for all device nodes in the namespace
Modify the ACPI namespace scanning code to register a struct
acpi_device object for every namespace node representing a device,
processor and so on, even if the device represented by that namespace
node is reported to be not present and not functional by _STA.

There are multiple reasons to do that.  First of all, it avoids
quite a lot of overhead when struct acpi_device objects are
deleted every time acpi_bus_trim() is run and then added again
by a subsequent acpi_bus_scan() for the same scope, although the
namespace objects they correspond to stay in memory all the time
(which always is the case on a vast majority of systems).

Second, it will allow user space to see that there are namespace
nodes representing devices that are not present at the moment and may
be added to the system.  It will also allow user space to evaluate
_SUN for those nodes to check what physical slots the "missing"
devices may be put into and it will make sense to add a sysfs
attribute for _STA evaluation after this change (that will be
useful for thermal management on some systems).

Next, it will help to consolidate the ACPI hotplug handling among
subsystems by making it possible to store hotplug-related information
in struct acpi_device objects in a standard common way.

Finally, it will help to avoid a race condition related to the
deletion of ACPI namespace nodes.  Namely, namespace nodes may be
deleted as a result of a table unload triggered by _EJ0 or _DCK.
If a hotplug notification for one of those nodes is triggered
right before the deletion and it executes a hotplug callback
via acpi_hotplug_execute(), the ACPI handle passed to that
callback may be stale when the callback actually runs.  One way
to work around that is to always pass struct acpi_device pointers
to hotplug callbacks after doing a get_device() on the objects in
question which eliminates the use-after-free possibility (the ACPI
handles in those objects are invalidated by acpi_scan_drop_device(),
so they will trigger ACPICA errors on attempts to use them).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-22 21:54:37 +01:00
Rafael J. Wysocki d783156ea3 ACPI / scan: Define non-empty device removal handler
If an ACPI namespace node is removed (usually, as a result of a
table unload), and there is a data object attached to that node,
acpi_ns_delete_node() executes the removal handler submitted to
acpi_attach_data() for that object.  That handler is currently empty
for struct acpi_device objects, so it is necessary to detach those
objects from the corresponding ACPI namespace nodes in advance every
time a table unload may happen.  That is cumbersome and inefficient
and leads to some design constraints that turn out to be quite
inconvenient (in particular, struct acpi_device objects cannot be
registered for namespace nodes representing devices that are not
reported as present or functional by _STA).

For this reason, introduce a non-empty removal handler for ACPI
device objects that will unregister them when their ACPI namespace
nodes go away.

This code modification alone should not change functionality except
for the ordering of the ACPI hotplug workqueue which should not
matter (without subsequent code changes).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-22 21:52:12 +01:00
Rafael J. Wysocki 76540969b1 Merge back earlier acpi-hotplug material. 2013-11-22 21:48:00 +01:00
Toshi Kani ca499fc87e ACPI / hotplug: Fix conflicted PCI bridge notify handlers
The PCI host bridge scan handler installs its own notify handler,
handle_hotplug_event_root(), by itself.  Nevertheless, the ACPI
hotplug framework also installs the common notify handler,
acpi_hotplug_notify_cb(), for PCI root bridges.  This causes
acpi_hotplug_notify_cb() to call _OST method with unsupported
error as hotplug.enabled is not set.

To address this issue, introduce hotplug.ignore flag, which
indicates that the scan handler installs its own notify handler by
itself.  The ACPI hotplug framework does not install the common
notify handler when this flag is set.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
[rjw: Changed the name of the new flag]
Cc: 3.9+ <stable@vger.kernel.org> # 3.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-20 14:25:34 +01:00
Rafael J. Wysocki 614d7426ec Merge branch 'acpi-hotplug'
* acpi-hotplug:
  ACPI / scan: Set flags.match_driver in acpi_bus_scan_fixed()
  ACPI / PCI root: Clear driver_data before failing enumeration
  ACPI / hotplug: Fix PCI host bridge hot removal
  ACPI / hotplug: Fix acpi_bus_get_device() return value check
2013-11-19 01:05:46 +01:00
Rafael J. Wysocki 883461679a ACPI / scan: Set flags.match_driver in acpi_bus_scan_fixed()
Before commit 6931007cc9 (ACPI / scan: Start matching drivers
after trying scan handlers) the match_driver flag for all devices
was set in acpi_add_single_object(), but now it is set by
acpi_bus_device_attach() which is not called for the "fixed"
devices added by acpi_bus_scan_fixed().  This means that
flags.match_driver is never set for those devices now, so make
acpi_bus_scan_fixed() set it before calling device_attach().

Fixes: 6931007cc9 (ACPI / scan: Start matching drivers after trying scan handlers)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-19 01:04:25 +01:00
Rafael J. Wysocki c1beb0bdb5 ACPI / hotplug: Fix PCI host bridge hot removal
Since the PCI host bridge scan handler does not set hotplug.enabled,
the check of it in acpi_bus_device_eject() effectively prevents the
root bridge hot removal from working after commit a3b1b1ef78
(ACPI / hotplug: Merge device hot-removal routines).  However, that
check is not necessary, because the other acpi_bus_device_eject()
users, acpi_hotplug_notify_cb and acpi_eject_store(), do the same
check by themselves before executing that function.

For this reason, remove the scan handler check from
acpi_bus_device_eject() to make PCI hot bridge hot removal work
again.

Fixes: a3b1b1ef78 (ACPI / hotplug: Merge device hot-removal routines)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-11-19 01:02:52 +01:00
Rafael J. Wysocki 5beaee4f19 ACPI / hotplug: Fix acpi_bus_get_device() return value check
Since acpi_bus_get_device() returns a plain int and not acpi_status,
ACPI_FAILURE() should not be used for checking its return value.  Fix
that.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-11-19 01:02:22 +01:00
Rafael J. Wysocki 63ff4d0765 Merge branch 'acpi-hotplug'
* acpi-hotplug:
  ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines
  ACPI / hotplug: Do not execute "insert in progress" _OST
  ACPI / hotplug: Carry out PCI root eject directly
  ACPI / hotplug: Merge device hot-removal routines
  ACPI / hotplug: Make acpi_bus_hot_remove_device() internal
  ACPI / hotplug: Simplify device ejection routines
  ACPI / hotplug: Fix handle_root_bridge_removal()
  ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug
  ACPI / scan: Start matching drivers after trying scan handlers
  ACPI: Remove acpi_pci_slot_init() headers from internal.h

Conflicts:
	include/acpi/acpiosxf.h (with the 'acpica' branch)
2013-11-07 19:31:15 +01:00
Rafael J. Wysocki 7b98118aaa ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines
There are two different interfaces for queuing up work items on the
ACPI hotplug workqueue, alloc_acpi_hp_work() used by PCI and PCI host
bridge hotplug code and acpi_os_hotplug_execute() used by the common
ACPI hotplug code and docking stations.  They both are somewhat
cumbersome to use and work slightly differently.

The users of alloc_acpi_hp_work() have to submit a work function that
will extract the necessary data items from a struct acpi_hp_work
object allocated by alloc_acpi_hp_work() and then will free that
object, while it would be more straightforward to simply use a work
function with one more argument and let the interface take care of
the execution details.

The users of acpi_os_hotplug_execute() also have to deal with the
fact that it takes only one argument in addition to the work function
pointer, although acpi_os_execute_deferred() actually takes care of
the allocation and freeing of memory, so it would have been able to
pass more arguments to the work function if it hadn't been
constrained by the connection with acpi_os_execute().

Moreover, while alloc_acpi_hp_work() makes GFP_KERNEL memory
allocations, which is correct, because hotplug work items are
always queued up from process context, acpi_os_hotplug_execute()
uses GFP_ATOMIC, as that is needed by acpi_os_execute().  Also,
acpi_os_execute_deferred() queued up by it waits for the ACPI event
workqueues to flush before executing the work function, whereas
alloc_acpi_hp_work() can't do anything similar.  That leads to
somewhat arbitrary differences in behavior between various ACPI
hotplug code paths and has to be straightened up.

For this reason, replace both alloc_acpi_hp_work() and
acpi_os_hotplug_execute() with a single interface,
acpi_hotplug_execute(), combining their behavior and being more
friendly to its users than any of the two.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-07 19:28:48 +01:00
Rafael J. Wysocki 176a88d79d ACPI / hotplug: Do not execute "insert in progress" _OST
According to the ACPI spec (5.0, Section 6.3.5), the "Device
insertion in progress (pending)" (0x80) _OST status code is
reserved for the "Insertion Processing" (0x200) source event
which is "a result of an OSPM action".  Specifically, it is not
a notification, so that status code should not be used during
notification processing, which unfortunately is done by
acpi_scan_bus_device_check().

For this reason, drop the ACPI_OST_SC_INSERT_IN_PROGRESS _OST
status evaluation from there (it was a mistake to put it in there
in the first place).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: All applicable <stable@vger.kernel.org>
2013-11-07 01:42:17 +01:00
Rafael J. Wysocki 43d388832b ACPI / hotplug: Carry out PCI root eject directly
Since _handle_hotplug_event_root() is run from the ACPI hotplug
workqueue, it doesn't need to queue up a work item to eject a PCI
host bridge on the same workqueue.  Instead, it can just carry out
the eject by calling acpi_bus_device_eject() directly, so make that
happen.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-07 01:42:09 +01:00
Rafael J. Wysocki a3b1b1ef78 ACPI / hotplug: Merge device hot-removal routines
There is no real reasn why acpi_bus_device_eject() and
acpi_bus_hot_remove_device() should work differently, so rework
acpi_bus_device_eject() so that it can be called internally by
both acpi_bus_hot_remove_device() and acpi_eject_store_work().
Accordingly, rework acpi_hotplug_notify_cb() to queue up the
execution of acpi_bus_hot_remove_device() through
acpi_os_hotplug_execute() on eject request notifications.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-11-07 01:41:58 +01:00
Rafael J. Wysocki ace8238b00 ACPI / hotplug: Make acpi_bus_hot_remove_device() internal
Notice that handle_root_bridge_removal() is the only user of
acpi_bus_hot_remove_device(), so it doesn't have to be exported
any more and can be made internal to the ACPI core.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-11-07 01:41:48 +01:00
Rafael J. Wysocki 5add99cfef ACPI / hotplug: Simplify device ejection routines
Simplify handle_root_bridge_removal() and acpi_eject_store() by
getting rid of struct acpi_eject_event and passing device objects
directly to async routines executed via acpi_os_hotplug_execute().

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-11-07 01:41:39 +01:00
Rafael J. Wysocki 7f28ddecce ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug
In theory, an ACPI device object may be the parent of another
device object whose hotplug is disabled by user space through its
scan handler.  In that case, the eject operation targeting the
parent should fail as though the parent's own hotplug was disabled,
but currently this is not the case, because acpi_scan_hot_remove()
doesn't check the disable/enable hotplug status of the children
of the top-most object passed to it.

To fix this, modify acpi_bus_offline_companions() to return an
error code if hotplug is disabled for the given device object.
[Also change the name of the function to acpi_bus_offline(),
because it is not only about companions any more, and change
the name of acpi_bus_online_companions() accordingly.]  Make
acpi_scan_hot_remove() propagate that error to its callers.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-11-07 01:41:14 +01:00
Rafael J. Wysocki 6931007cc9 ACPI / scan: Start matching drivers after trying scan handlers
ACPI scan handlers should always be attached to struct acpi_device
objects before any ACPI drivers, but there is a window during which
a driver may be attached to a struct acpi_device before checking if
there is a matching scan handler.  Namely, that will happen if an
ACPI driver module is loaded during acpi_bus_scan() right after
the first namespace walk is complete and before the given device
is processed by the second namespace walk.

To prevent that from happening, set the match_driver flags of
struct acpi_device objects right before running device_attach()
for them in acpi_bus_device_attach().

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-11-07 01:41:01 +01:00
Rafael J. Wysocki 2421ad48f4 ACPI / PM: Drop two functions that are not used any more
Two functions defined in device_pm.c, acpi_dev_pm_add_dependent()
and acpi_dev_pm_remove_dependent(), have no callers and may be
dropped, so drop them.

Moreover, they are the only functions adding entries to and removing
entries from the power_dependent list in struct acpi_device, so drop
that list too.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-17 15:44:48 +02:00
Rafael J. Wysocki 6585925b62 ACPI: Use EXPORT_SYMBOL() for acpi_bus_get_device()
Commit caf5c03f (ACPI: Move acpi_bus_get_device() from bus.c to
scan.c) caused acpi_bus_get_device() to be exported using
EXPORT_SYMBOL_GPL(), but that broke some binary drivers in
existence, so revert that change.

Reported-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-01 23:02:43 +02:00