Expose the kernel connection tracker via OVS. Userspace components can
make use of the CT action to populate the connection state (ct_state)
field for a flow. This state can be subsequently matched.
Exposed connection states are OVS_CS_F_*:
- NEW (0x01) - Beginning of a new connection.
- ESTABLISHED (0x02) - Part of an existing connection.
- RELATED (0x04) - Related to an established connection.
- INVALID (0x20) - Could not track the connection for this packet.
- REPLY_DIR (0x40) - This packet is in the reply direction for the flow.
- TRACKED (0x80) - This packet has been sent through conntrack.
When the CT action is executed by itself, it will send the packet
through the connection tracker and populate the ct_state field with one
or more of the connection state flags above. The CT action will always
set the TRACKED bit.
When the COMMIT flag is passed to the conntrack action, this specifies
that information about the connection should be stored. This allows
subsequent packets for the same (or related) connections to be
correlated with this connection. Sending subsequent packets for the
connection through conntrack allows the connection tracker to consider
the packets as ESTABLISHED, RELATED, and/or REPLY_DIR.
The CT action may optionally take a zone to track the flow within. This
allows connections with the same 5-tuple to be kept logically separate
from connections in other zones. If the zone is specified, then the
"ct_zone" match field will be subsequently populated with the zone id.
IP fragments are handled by transparently assembling them as part of the
CT action. The maximum received unit (MRU) size is tracked so that
refragmentation can occur during output.
IP frag handling contributed by Andy Zhou.
Based on original design by Justin Pettit.
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: Justin Pettit <jpettit@nicira.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, we used the kernel-internal netlink actions length to
calculate the size of messages to serialize back to userspace.
However,the sw_flow_actions may not be formatted exactly the same as the
actions on the wire, so store the original actions length when
de-serializing and re-use the original length when serializing.
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename the ipv4_tos and ipv4_ttl fields to just 'tos' and 'ttl', as they'll
be used with IPv6 tunnels, too.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the IPv6 addresses as an union with IPv4 ones. When using IPv4, the
newly introduced padding after the IPv4 addresses needs to be zeroed out.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This gets rid of all OVS specific VXLAN code in the receive and
transmit path by using a VXLAN net_device to represent the vport.
Only a small shim layer remains which takes care of handling the
VXLAN specific OVS Netlink configuration.
Unexports vxlan_sock_add(), vxlan_sock_release(), vxlan_xmit_skb()
since they are no longer needed.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Utilize the new metadata dst to attach encapsulation instructions to
the skb. The existing egress_tun_info via the OVS_CB() is left in
place until all tunnel vports have been converted to the new method.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename the tunnel metadata data structures currently internal to
OVS and make them generic for use by all IP tunnels.
Both structures are kernel internal and will stay that way. Their
members are exposed to user space through individual Netlink
attributes by OVS. It will therefore be possible to extend/modify
these structures without affecting user ABI.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace "ntohs(proto) >= ETH_P_802_3_MIN" w/ eth_proto_is_802_3(proto).
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Those are counterparts to nla_put_in_addr and nla_put_in6_addr.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IP addresses are often stored in netlink attributes. Add generic functions
to do that.
For nla_put_in_addr, it would be nicer to pass struct in_addr but this is
not used universally throughout the kernel, in way too many places __be32 is
used to store IPv4 address.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set actions consist of a regular OVS_KEY_ATTR_* attribute nested inside
of a OVS_ACTION_ATTR_SET action attribute. When converting masked actions
back to regular set actions, the inner attribute length was not changed,
ie, double the length being serialized. This patch fixes the bug.
Fixes: 83d2b9b ("net: openvswitch: Support masked set actions.")
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix typo where mask is used rather than key.
Fixes: 74ed7ab9264("openvswitch: Add support for unique flow IDs.")
Reported-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/openvswitch/flow_netlink.c: In function ‘validate_and_copy_set_tun’:
net/openvswitch/flow_netlink.c:1749: warning: ‘err’ may be used uninitialized in this function
If ipv4_tun_from_nlattr() returns a different positive value than
OVS_TUNNEL_KEY_ATTR_GENEVE_OPTS, err will be uninitialized, and
validate_and_copy_set_tun() may return an undefined value instead of a
zero success indicator. Initialize err to zero to fix this.
Fixes: 1dd144cf5b ("openvswitch: Support VXLAN Group Policy extension")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
OVS userspace already probes the openvswitch kernel module for
OVS_ACTION_ATTR_SET_MASKED support. This patch adds the kernel module
implementation of masked set actions.
The existing set action sets many fields at once. When only a subset
of the IP header fields, for example, should be modified, all the IP
fields need to be exact matched so that the other field values can be
copied to the set action. A masked set action allows modification of
an arbitrary subset of the supported header bits without requiring the
rest to be matched.
Masked set action is now supported for all writeable key types, except
for the tunnel key. The set tunnel action is an exception as any
input tunnel info is cleared before action processing starts, so there
is no tunnel info to mask.
The kernel module converts all (non-tunnel) set actions to masked set
actions. This makes action processing more uniform, and results in
less branching and duplicating the action processing code. When
returning actions to userspace, the fully masked set actions are
converted back to normal set actions. We use a kernel internal action
code to be able to tell the userspace provided and converted masked
set actions apart.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, flows were manipulated by userspace specifying a full,
unmasked flow key. This adds significant burden onto flow
serialization/deserialization, particularly when dumping flows.
This patch adds an alternative way to refer to flows using a
variable-length "unique flow identifier" (UFID). At flow setup time,
userspace may specify a UFID for a flow, which is stored with the flow
and inserted into a separate table for lookup, in addition to the
standard flow table. Flows created using a UFID must be fetched or
deleted using the UFID.
All flow dump operations may now be made more terse with OVS_UFID_F_*
flags. For example, the OVS_UFID_F_OMIT_KEY flag allows responses to
omit the flow key from a datapath operation if the flow has a
corresponding UFID. This significantly reduces the time spent assembling
and transacting netlink messages. With all OVS_UFID_F_OMIT_* flags
enabled, the datapath only returns the UFID and statistics for each flow
during flow dump, increasing ovs-vswitchd revalidator performance by 40%
or more.
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor the ovs_nla_fill_match() function into separate netlink
serialization functions ovs_nla_put_{unmasked_key,mask}(). Modify
ovs_nla_put_flow() to handle attribute nesting and expose the 'is_mask'
parameter - all callers need to nest the flow, and callers have better
knowledge about whether it is serializing a mask or not.
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduces support for the group policy extension to the VXLAN virtual
port. The extension is disabled by default and only enabled if the user
has provided the respective configuration.
ovs-vsctl add-port br0 vxlan0 -- \
set Interface vxlan0 type=vxlan options:exts=gbp
The configuration interface to enable the extension is based on a new
attribute OVS_VXLAN_EXT_GBP nested inside OVS_TUNNEL_ATTR_EXTENSION
which can carry additional extensions as needed in the future.
The group policy metadata is stored as binary blob (struct ovs_vxlan_opts)
internally just like Geneve options but transported as nested Netlink
attributes to user space.
Renames the existing TUNNEL_OPTIONS_PRESENT to TUNNEL_GENEVE_OPT with the
binary value kept intact, a new flag TUNNEL_VXLAN_OPT is introduced.
The attributes OVS_TUNNEL_KEY_ATTR_VXLAN_OPTS and existing
OVS_TUNNEL_KEY_ATTR_GENEVE_OPTS are implemented mutually exclusive.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
nlattr_set() is currently hardcoded to two levels of nesting. This change
introduces struct ovs_len_tbl to define minimal length requirements plus
next level nesting tables to traverse the key attributes to arbitrary depth.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Also factors out Geneve validation code into a new separate function
validate_and_copy_geneve_opts().
A subsequent patch will introduce VXLAN options. Rename the existing
GENEVE_TUN_OPTS() to reflect its extended purpose of carrying generic
tunnel metadata options.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linux stack does not implement GSO for packet with multiple
encapsulations. Therefore there was check in MPLS action
validation to detect such case, But this check introduced
bug which deleted one or more actions from actions list.
Following patch removes this check to fix the validation.
Fixes: 25cd9ba0ab ("openvswitch: Add basic MPLS support to
kernel").
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reported-by: Srinivas Neginhal <sneginha@vmware.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/ethernet/amd/xgbe/xgbe-desc.c
drivers/net/ethernet/renesas/sh_eth.c
Overlapping changes in both conflict cases.
Signed-off-by: David S. Miller <davem@davemloft.net>
Following patch fixes typo in the flow validation. This prevented
installation of ARP and IPv6 flows.
Fixes: 19e7a3df72 ("openvswitch: Fix NDP flow mask validation")
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reviewed-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/ieee802154/fakehard.c
A bug fix went into 'net' for ieee802154/fakehard.c, which is removed
in 'net-next'.
Add build fix into the merge from Stephen Rothwell in openvswitch, the
logging macros take a new initial 'log' argument, a new call was added
in 'net' so when we merge that in here we have to explicitly add the
new 'log' arg to it else the build fails.
Signed-off-by: David S. Miller <davem@davemloft.net>
When userspace doesn't provide a mask, OVS datapath generates a fully
unwildcarded mask for the flow by copying the flow and setting all bits
in all fields. For IPv6 label, this creates a mask that matches on the
upper 12 bits, causing the following error:
openvswitch: netlink: Invalid IPv6 flow label value (value=ffffffff, max=fffff)
This patch ignores the label validation check for masks, avoiding this
error.
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
match_validate() enforce that a mask matching on NDP attributes has also an
exact match on ICMPv6 type.
The ICMPv6 type, which is 8-bit wide, is stored in the 'tp.src' field of
'struct sw_flow_key', which is 16-bit wide.
Therefore, an exact match on ICMPv6 type should only check the first 8 bits.
This commit fixes a bug that prevented flows with an exact match on NDP field
from being installed
Introduced by commit 03f0d916aa ("openvswitch: Mega flow implementation").
Signed-off-by: Daniele Di Proietto <ddiproietto@vmware.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
This new flag is useful for suppressing error logging while probing
for datapath features using flow commands. For backwards
compatibility reasons the commands are executed normally, but error
logging is suppressed.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
OVS vswitch has extended IPFIX exporter to export tunnel headers
to improve network visibility.
To export this information userspace needs to know egress tunnel
for given packet. By extending packet attributes datapath can
export egress tunnel info for given packet. So that userspace
can ask for egress tunnel info in userspace action. This
information is used to build IPFIX data for given flow.
Signed-off-by: Wenyu Zhang <wenyuz@vmware.com>
Acked-by: Romain Lenglet <rlenglet@vmware.com>
Acked-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
OVS does mask validation even if it does not need to convert
netlink mask attributes to mask structure. ovs_nla_get_match()
caller can pass NULL mask structure pointer if the caller does
not need mask. Therefore NULL check is required in SW_FLOW_KEY*
macros. Following patch does not convert mask netlink attributes
if mask pointer is NULL, so we do not need these checks in
SW_FLOW_KEY* macro.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Daniele Di Proietto <ddiproietto@vmware.com>
Acked-by: Andy Zhou <azhou@nicira.com>
There are two separate API to allocate and copy actions list. Anytime
OVS needs to copy action list, it needs to call both functions.
Following patch moves action allocation to copy function to avoid
code duplication.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
There are many possible ways that a flow can be invalid so we've
added logging for most of them. This adds logs for the remaining
possible cases so there isn't any ambiguity while debugging.
CC: Federico Iezzi <fiezzi@enter.it>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Acked-by: Thomas Graf <tgraf@noironetworks.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
These two cases used to be treated differently for IPv4/IPv6,
but they are now identical.
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Allow datapath to recognize and extract MPLS labels into flow keys
and execute actions which push, pop, and set labels on packets.
Based heavily on work by Leo Alterman, Ravi K, Isaku Yamahata and Joe Stringer.
Cc: Ravi K <rkerur@gmail.com>
Cc: Leo Alterman <lalterman@nicira.com>
Cc: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
If megaflows are disabled, the userspace does not send the netlink attribute
OVS_FLOW_ATTR_MASK, and the kernel must create an exact match mask.
sw_flow_mask_set() sets every bytes (in 'range') of the mask to 0xff, even the
bytes that represent padding for struct sw_flow, or the bytes that represent
fields that may not be set during ovs_flow_extract().
This is a problem, because when we extract a flow from a packet,
we do not memset() anymore the struct sw_flow to 0.
This commit gets rid of sw_flow_mask_set() and introduces mask_set_nlattr(),
which operates on the netlink attributes rather than on the mask key. Using
this approach we are sure that only the bytes that the user provided in the
flow are matched.
Also, if the parse_flow_mask_nlattrs() for the mask ENCAP attribute fails, we
now return with an error.
This bug is introduced by commit 0714812134
("openvswitch: Eliminate memset() from flow_extract").
Reported-by: Alex Wang <alexw@nicira.com>
Signed-off-by: Daniele Di Proietto <ddiproietto@vmware.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Openvswitch implementation is completely agnostic to the options
that are in use and can handle newly defined options without
further work. It does this by simply matching on a byte array
of options and allowing userspace to setup flows on this array.
Signed-off-by: Jesse Gross <jesse@nicira.com>
Singed-off-by: Ansis Atteka <aatteka@nicira.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Acked-by: Thomas Graf <tgraf@noironetworks.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the flow information that is matched for tunnels and
the tunnel data passed around with packets is the same. However,
as additional information is added this is not necessarily desirable,
as in the case of pointers.
This adds a new structure for tunnel metadata which currently contains
only the existing struct. This change is purely internal to the kernel
since the current OVS_KEY_ATTR_IPV4_TUNNEL is simply a compressed version
of OVS_KEY_ATTR_TUNNEL that is translated at flow setup.
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some tunnel formats have mechanisms for indicating that packets are
OAM frames that should be handled specially (either as high priority or
not forwarded beyond an endpoint). This provides support for allowing
those types of packets to be matched.
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recirc action allows a packet to reenter openvswitch processing.
currently openvswitch lookup flow for packet received and execute
set of actions on that packet, with help of recirc action we can
process/modify the packet and recirculate it back in openvswitch
for another pass.
OVS hash action calculates 5-tupple hash and set hash in flow-key
hash. This can be used along with recirculation for distributing
packets among different ports for bond devices.
For example:
OVS bonding can use following actions:
Match on: bond flow; Action: hash, recirc(id)
Match on: recirc-id == id and hash lower bits == a;
Action: output port_bond_a
Signed-off-by: Andy Zhou <azhou@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
OVS flow extract is called on packet receive or packet
execute code path. Following patch defines separate API
for extracting flow-key in packet execute code path.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Andy Zhou <azhou@nicira.com>
Minimize padding in sw_flow_key and move 'tp' top the main struct.
These changes simplify code when accessing the transport port numbers
and the tcp flags, and makes the sw_flow_key 8 bytes smaller on 64-bit
systems (128->120 bytes). These changes also make the keys for IPv4
packets to fit in one cache line.
There is a valid concern for safety of packing the struct
ovs_key_ipv4_tunnel, as it would be possible to take the address of
the tun_id member as a __be64 * which could result in unaligned access
in some systems. However:
- sw_flow_key itself is 64-bit aligned, so the tun_id within is
always
64-bit aligned.
- We never make arrays of ovs_key_ipv4_tunnel (which would force
every
second tun_key to be misaligned).
- We never take the address of the tun_id in to a __be64 *.
- Whereever we use struct ovs_key_ipv4_tunnel outside the
sw_flow_key,
it is in stack (on tunnel input functions), where compiler has full
control of the alignment.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
The 'output' argument of the ovs_nla_put_flow() is the one from which
the bits are written to the netlink attributes. For SCTP we
accidentally used the bits from the 'swkey' instead. This caused the
mask attributes to include the bits from the actual flow key instead
of the mask.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
The 5-tuple optimization becomes unnecessary with a later per-NUMA
node stats patch. Remove it first to make the changes easier to
grasp.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Add "openvswitch: " prefix to OVS_NLERR output
to match the other OVS_NLERR output of datapath.c
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
This is necessary, since u64 is not unsigned long long
in all architectures: u64 could be also uint64_t.
Signed-off-by: Daniele Di Proietto <daniele.di.proietto@gmail.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
In few functions, const formal parameters are assigned or cast to
non-const.
These changes suppress warnings if compiled with -Wcast-qual.
Signed-off-by: Daniele Di Proietto <daniele.di.proietto@gmail.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
As we're only doing a kfree() anyway in the RCU callback, we can
simply use kfree_rcu, which does the same job, and remove the
function rcu_free_sw_flow_mask_cb() and rcu_free_acts_callback().
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
With mega flow implementation ovs flow can be shared between
multiple CPUs which makes stats updates highly contended
operation. This patch uses per-CPU stats in cases where a flow
is likely to be shared (if there is a wildcard in the 5-tuple
and therefore likely to be spread by RSS). In other situations,
it uses the current strategy, saving memory and allocation time.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
tcp_flags=flags/mask
Bitwise match on TCP flags. The flags and mask are 16-bit num‐
bers written in decimal or in hexadecimal prefixed by 0x. Each
1-bit in mask requires that the corresponding bit in port must
match. Each 0-bit in mask causes the corresponding bit to be
ignored.
TCP protocol currently defines 9 flag bits, and additional 3
bits are reserved (must be transmitted as zero), see RFCs 793,
3168, and 3540. The flag bits are, numbering from the least
significant bit:
0: FIN No more data from sender.
1: SYN Synchronize sequence numbers.
2: RST Reset the connection.
3: PSH Push function.
4: ACK Acknowledgement field significant.
5: URG Urgent pointer field significant.
6: ECE ECN Echo.
7: CWR Congestion Windows Reduced.
8: NS Nonce Sum.
9-11: Reserved.
12-15: Not matchable, must be zero.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Over the time datapath.c and flow.c has became pretty large files.
Following patch restructures functionality of component into three
different components:
flow.c: contains flow extract.
flow_netlink.c: netlink flow api.
flow_table.c: flow table api.
This patch restructures code without changing logic.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Joe Stringer