PCI core access configuration space registers in resume_noirq callbacks.
In the case of dra7xx, PIPE3 PHY connected to PCIe controller has to be
enabled before accessing configuration space registers. Since
PIPE3 PHY is enabled by only configuring control module registers, no
aborts has been observed so far (though during noirq stage, interface
clock of PIPE3 PHY is not enabled).
With new TRM updates, PIPE3 PHY has to be initialized (PIPE3 PHY
registers has to be accessed) as well which requires the interface
clock of PIPE3 PHY to be enabled. The interface clock of PIPE3 PHY is
derived from OCP2SCP and hence PCIe PHY is modeled as a child of
OCP2SCP. Since pm_runtime is not enabled during noirq stage,
pm_runtime_get_sync done in phy_init doesn't enable
OCP2SCP clocks resulting in abort when PIPE3 PHY registers are
accessed.
Create a function dependency between PCIe and PHY here to make
sure PCIe is suspended before PCIe PHY/OCP2SCP and resumed after
PCIe PHY/OCP2SCP.
Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Add shutdown handler to cleanly turn off clocks. This will help in cases of
kexec where in a new kernel can boot abruptly.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
* pci/endpoint:
tools: PCI: Add a missing option help line
misc: pci_endpoint_test: Enable/Disable MSI using module param
misc: pci_endpoint_test: Avoid using hard-coded BAR sizes
misc: pci_endpoint_test: Add support to not enable MSI interrupts
misc: pci_endpoint_test: Add support to provide aligned buffer addresses
misc: pci_endpoint_test: Add support for PCI_ENDPOINT_TEST regs to be mapped to any BAR
PCI: designware-ep: Do not disable BARs during initialization
PCI: dra7xx: Reset all BARs during initialization
PCI: dwc: designware: Provide page_size to pci_epc_mem
PCI: endpoint: Remove the ->remove() callback
PCI: endpoint: Add support to poll early for host commands
PCI: endpoint: Add support to use _any_ BAR to map PCI_ENDPOINT_TEST regs
PCI: endpoint: Do not reset *command* inadvertently
PCI: endpoint: Add "volatile" to pci_epf_test_reg
PCI: endpoint: Add support for configurable page size
PCI: endpoint: Make ->remove() callback optional
PCI: endpoint: Add an API to get matching "pci_epf_device_id"
PCI: endpoint: Use of_dma_configure() to set initial DMA mask
When platform_get_irq() fails we should propagate the real error value
instead of always returning -EINVAL.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
dra7xx has all base address registers (BAR) enabled by default. Reset all
BARs during initialization and so that BARs are enabled only if they are
actually used.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
platform_get_irq() returns an error code, but the pci-dra7xx driver ignores
it and always returns -EINVAL. This is not correct and prevents
-EPROBE_DEFER from being propagated properly.
Print and propagate the return value of platform_get_irq() on failure.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Use the PCI_NUM_INTX macro to indicate the number of PCI INTx interrupts
rather than the magic number 4. This makes it clearer where the number
comes from & what it relates to.
Based-on-similar-patches-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
In several dwc-based drivers, ->host_init() can fail, so make sure to
propagate and handle this to avoid continuing operation of a driver or
hardware in an invalid state.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Previously, we tried to clear interrupt requests by clearing bits in the
PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI and PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN
registers. But per the TRM, these fields are RW1C, so we must *set* bits
to clear the interrupt bits.
Fixes: 47ff3de911 ("PCI: dra7xx: Add TI DRA7xx PCIe driver")
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
The dw_pcie_host_ops structures are never modified. Constify these
structures such that these can be write-protected.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
According to errata i870, access to the PCIe slave port that are not 32-bit
aligned will result in incorrect mapping to TLP Address and Byte enable
fields.
Accessing non 32-bit aligned data causes incorrect data in the target
buffer if memcpy is used. Implement the workaround for this errata here.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The PCIe controller integrated in dra7xx SoCs is capable of operating in
endpoint mode. Add endpoint mode support to dra7xx driver.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
No functional change. Split dra7xx_pcie_enable_interrupts() into
dra7xx_pcie_enable_wrapper_interrupts() and
dra7xx_pcie_enable_msi_interrupts() so that wrapper interrupts and MSI
interrupts can be enabled independently. This is in preparation for adding
EP mode support to dra7xx driver since EP mode doesn't have to enable
msi_interrupts.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Currently devm_request_irq() is being called before base, PCI fields of
dra7xx_pcie structure are populated. It is called even before
pm_runtime_enable() and pm_runtime_get_sync() are called. This will lead
to exceptions if in case an interrupt is triggered before the all of the
above are done. Hence push the devm_request_irq() call to the end of the
probe.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Populate cpu_addr_fixup ops to extract the least 28 bits of the
corresponding CPU address.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Keep only the host-specific members in struct pcie_port and move the common
members (i.e common to both host and endpoint) to struct dw_pcie. This is
in preparation for adding endpoint mode support to designware driver.
While at that also fix checkpatch warnings.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Jingoo Han <jingoohan1@gmail.com>
CC: Richard Zhu <hongxing.zhu@nxp.com>
CC: Lucas Stach <l.stach@pengutronix.de>
CC: Murali Karicheri <m-karicheri2@ti.com>
CC: Minghuan Lian <minghuan.Lian@freescale.com>
CC: Mingkai Hu <mingkai.hu@freescale.com>
CC: Roy Zang <tie-fei.zang@freescale.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Niklas Cassel <niklas.cassel@axis.com>
CC: Jesper Nilsson <jesper.nilsson@axis.com>
CC: Joao Pinto <Joao.Pinto@synopsys.com>
CC: Zhou Wang <wangzhou1@hisilicon.com>
CC: Gabriele Paoloni <gabriele.paoloni@huawei.com>
CC: Stanimir Varbanov <svarbanov@mm-sol.com>
CC: Pratyush Anand <pratyush.anand@gmail.com>
No functional change. dw_pcie_cfg_read()/dw_pcie_cfg_write() doesn't do
anything specific to access configuration space. It can be just renamed to
dw_pcie_read()/dw_pcie_write() and used to read/write data to dbi space.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-By: Joao Pinto <jpinto@synopsys.com>
CC: Jingoo Han <jingoohan1@gmail.com>
CC: Murali Karicheri <m-karicheri2@ti.com>
CC: Stanimir Varbanov <svarbanov@mm-sol.com>
CC: Pratyush Anand <pratyush.anand@gmail.com>
Add platform_set_drvdata() in all designware-based drivers to store the
private data structure of the driver so that dev_set_drvdata() can be used
to get back private data structure in add_pcie_port/host_init. This is in
preparation for splitting struct pcie_port into core and host only
structures. After the split pcie_port will not be part of the driver's
private data structure and *container_of* used now to get the private data
pointer cannot be used.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Jingoo Han <jingoohan1@gmail.com>
CC: Richard Zhu <hongxing.zhu@nxp.com>
CC: Lucas Stach <l.stach@pengutronix.de>
CC: Murali Karicheri <m-karicheri2@ti.com>
CC: Minghuan Lian <minghuan.Lian@freescale.com>
CC: Mingkai Hu <mingkai.hu@freescale.com>
CC: Roy Zang <tie-fei.zang@freescale.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Niklas Cassel <niklas.cassel@axis.com>
CC: Jesper Nilsson <jesper.nilsson@axis.com>
CC: Joao Pinto <Joao.Pinto@synopsys.com>
CC: Zhou Wang <wangzhou1@hisilicon.com>
CC: Gabriele Paoloni <gabriele.paoloni@huawei.com>
CC: Stanimir Varbanov <svarbanov@mm-sol.com>
CC: Pratyush Anand <pratyush.anand@gmail.com>
No functional change. PHY APIs like phy_init()/phy_power_on() are invoked
from multiple places. Group all the PHY APIs in dra7xx_pcie_enable_phy()
and dra7xx_pcie_disable_phy() and use these functions for enabling or
disabling the PHY.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
pci-dra7xx driver had a bug in that if CONFIG_PCI_MSI config is enabled, it
doesn't support legacy interrupt. Fix it here so that both MSI and legacy
interrupts can be enabled simultaneously and the interrupt mechanism
supported by the endpoint device will be used.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
PCIe in AM57x/DRA7x devices is by default configured to work in GEN2 mode.
However there may be situations when working in GEN1 mode is desired. One
example is limitation i925 (PCIe GEN2 mode not supported at junction
temperatures < 0C).
Add support to force Root Complex to work in GEN1 mode if so desired, but
don't force GEN1 mode on any board just yet.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
No functional change. Use the new devm_gpiod_get_optional() to simplify
the probe code.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Group all the PCI drivers that use DesignWare core in dwc directory.
dwc IP is capable of operating in both host mode and device mode and
keeping it inside the *host* directory is misleading.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Acked-By: Joao Pinto <jpinto@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Minghuan Lian <minghuan.Lian@freescale.com>
Cc: Mingkai Hu <mingkai.hu@freescale.com>
Cc: Roy Zang <tie-fei.zang@freescale.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Pratyush Anand <pratyush.anand@gmail.com>
Cc: Niklas Cassel <niklas.cassel@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
Linus Torvalds