With all the IRQ machinery being in place, we can allow virtio
devices to additionally be configured as wakeup sources, in
which case basically any interrupt from them wakes us up. Note
that this requires a call FD because the VQs are all disabled.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
In external time-travel mode, where time is controlled via the
controller application socket, interrupt handling is a little
tricky. For example on virtio, the following happens:
* we receive a message (that requires an ACK) on the vhost-user socket
* we add a time-travel event to handle the interrupt
(this causes communication on the time socket)
* we ACK the original vhost-user message
* we then handle the interrupt once the event is triggered
This protocol ensures that the sender of the interrupt only continues
to run in the simulation when the time-travel event has been added.
So far, this was only done in the virtio driver, but it was actually
wrong, because only virtqueue interrupts were handled this way, and
config change interrupts were handled immediately. Additionally, the
messages were actually handled in the real Linux interrupt handler,
but Linux interrupt handlers are part of the simulation and shouldn't
run while there's no time event.
To really do this properly and only handle all kinds of interrupts in
the time-travel event when we are scheduled to run in the simulation,
rework this to plug in to the lower interrupt layers in UML directly:
Add a um_request_irq_tt() function that let's a time-travel aware
driver request an interrupt with an additional timetravel_handler()
that is called outside of the context of the simulation, to handle
the message only. It then adds an event to the time-travel calendar
if necessary, and no "real" Linux code runs outside of the time
simulation.
This also hooks in with suspend/resume properly now, since this new
timetravel_handler() can run while Linux is suspended and interrupts
are disabled, and decide to wake up (or not) the system based on the
message it received. Importantly in this case, it ACKs the message
before the system even resumes and interrupts are re-enabled, thus
allowing the simulation to progress properly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
If the system is suspended, the device shouldn't be able to send
anything to it. Disable virtqueues in suspend to simulate this,
and as we might be only using s2idle (kernel services are still
on), prevent sending anything on them as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
If we have a message without payload, we call full_read() with
len set to 0, which causes it to return -ECONNRESET. Catch this
case and explicitly return 0 for it so we can actually use the
zero-size config-changed message.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
There's no 'simtime' device, because implementing that through
virtio was just too much complexity. Clean up the comment that
still refers to it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
In time-travel mode, since my previous patch, the start time was
initialized too late, so that the system would read it before we
set it, thus always starting system time at 0 (1970-01-01). This
happens because timekeeping_init() reads the time and is called
before time_init().
Unfortunately, I didn't see this before because I was testing it
only with the RTC patch applied (and enabled), and then the time
is read again by the RTC a little - after time_init() this time.
Fix this by just doing the initialization whenever necessary.
Fixes: 2701c1bd91 ("um: time: Fix read_persistent_clock64() in time-travel")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Changing os_idle_sleep() to use pause() (I accidentally described
it as an empty select() in the commit log because I had changed it
from that to pause() in a later revision) exposed a race condition
in the idle code. The following can happen:
timer_settime(0, 0, {it_interval={tv_sec=0, tv_nsec=0}, it_value={tv_sec=0, tv_nsec=624017}}, NULL) = 0
...
<SIGALRM is delivered but we're already on the way to idle>
pause()
and we now hang forever. This was previously possible as well, but
it could never cause UML to hang for more than a second since we
could only sleep for that much, so at most you'd notice a "hiccup"
in the UML. Obviously, any sort of external interrupt also "saves"
it and interrupts pause().
Fix this by properly handling the race, rather than papering over
it again:
- first, block SIGALRM, and obtain the old signal set
- check the timer
- suspend, waiting for any signal out of the old set, if, and only
if, the timer will fire in the future
- restore the old signal mask
This ensures race-free operation: as it's blocked, the signal won't
be delivered while we're looking at the timer even if it were to be
triggered right _after_ we've returned from timer_gettime() with a
non-zero value (telling us the timer will trigger). Thus, despite
getting to sigsuspend() because timer_gettime() told us we're still
waiting, we'll not hang because sigsuspend() will return immediately
due to the pending signal.
Fixes: 49da38a3ef ("um: Simplify os_idle_sleep() and sleep longer")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This reverts commit 963285b0b4 ("um: support some of
ARCH_HAS_SET_MEMORY"), as it turns out that it's not only not
working (due to um never using the protection bits in the
page tables) but also corrupts the page tables if used on a
non-vmalloc page, since um never allocates proper page tables
for the 'physmem' in the first place.
Fixing all this will take more effort, so for now revert it.
Reported-by: Benjamin Berg <benjamin@sipsolutions.net>
Fixes: 963285b0b4 ("um: support some of ARCH_HAS_SET_MEMORY")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This reverts commit ef4459a6da ("um: allocate a guard page to
helper threads"), it's broken in multiple ways:
1) the free no longer matches the alloc; and
2) more importantly, the set_memory_ro() causes allocation of
page tables for the normal memory that doesn't have any,
and that later causes corruption and crashes (usually but
not always in vfree()).
We could fix the first bug and use vmalloc() to work around the
second, but set_memory_ro() actually doesn't do anything either
so I'll just revert that as well.
Reported-by: Benjamin Berg <benjamin@sipsolutions.net>
Fixes: ef4459a6da ("um: allocate a guard page to helper threads")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Since struct device is refcounted, we shouldn't free the vu_dev
immediately when it's removed from the platform device, but only
when the references actually all go away. Move the freeing to
the release to accomplish that.
Fixes: 5d38f32499 ("um: drivers: Add virtio vhost-user driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
With the addition of the ttynull console driver, the chance that a
console driver was already registerd did increase. Refine the logic when
to dump the kernel message buffer: always dump the buffer, when the UML
stdio console driver is not active and the preferred console.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
The addition of the "ttynull" console driver did break the ordering of the
UML stdio console driver.
The UML stdio console driver is added in late_initcall (7), whereby the
ttynull driver is added in device_initcall (6), which always does make the
ttynull driver the default console.
Fix it by explicitly adding the UML stdio console as the preferred console,
in case no 'console=' command line option was specified.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Back a few years ago, ioremap() was added to UML so that we'd
not break the build for everything all the time. However, for
some reason, v1 of the patch got applied, rather than the v2
that returned NULL, which was discussed here:
https://lore.kernel.org/lkml/1495726955-27497-1-git-send-email-logang@deltatee.com/
Fix that now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
This commit fixes a regression to handle command line parameters of ubd.
With a simple line "./linux ubd0="./disk-ext4.img", it fails at
ubd_setup_common(). The commit adds additional checks to the variables
in order to properly parse the paremeters which previously worked.
Fixes: ef3ba87cb7 ("um: ubd: Set device serial attribute from cmdline")
Cc: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Hajime Tazaki <thehajime@gmail.com>
Acked-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
- IRQ handling cleanups
- Support for suspend
- Various fixes for UML specific drivers: ubd, vector, xterm
-----BEGIN PGP SIGNATURE-----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=t1mQ
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- IRQ handling cleanups
- Support for suspend
- Various fixes for UML specific drivers: ubd, vector, xterm
* tag 'for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (32 commits)
um: Fix build w/o CONFIG_PM_SLEEP
um: time-travel: Correct time event IRQ delivery
um: irq/sigio: Support suspend/resume handling of workaround IRQs
um: time-travel: Actually apply "free-until" optimisation
um: chan_xterm: Fix fd leak
um: tty: Fix handling of close in tty lines
um: Monitor error events in IRQ controller
um: allocate a guard page to helper threads
um: support some of ARCH_HAS_SET_MEMORY
um: time-travel: avoid multiple identical propagations
um: Fetch registers only for signals which need them
um: Support suspend to RAM
um: Allow PM with suspend-to-idle
um: time: Fix read_persistent_clock64() in time-travel
um: Simplify os_idle_sleep() and sleep longer
um: Simplify IRQ handling code
um: Remove IRQ_NONE type
um: irq: Reduce irq_reg allocation
um: irq: Clean up and rename struct irq_fd
um: Clean up alarm IRQ chip name
...
-----BEGIN PGP SIGNATURE-----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=cadT
-----END PGP SIGNATURE-----
Merge tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block
Pull TIF_NOTIFY_SIGNAL updates from Jens Axboe:
"This sits on top of of the core entry/exit and x86 entry branch from
the tip tree, which contains the generic and x86 parts of this work.
Here we convert the rest of the archs to support TIF_NOTIFY_SIGNAL.
With that done, we can get rid of JOBCTL_TASK_WORK from task_work and
signal.c, and also remove a deadlock work-around in io_uring around
knowing that signal based task_work waking is invoked with the sighand
wait queue head lock.
The motivation for this work is to decouple signal notify based
task_work, of which io_uring is a heavy user of, from sighand. The
sighand lock becomes a huge contention point, particularly for
threaded workloads where it's shared between threads. Even outside of
threaded applications it's slower than it needs to be.
Roman Gershman <romger@amazon.com> reported that his networked
workload dropped from 1.6M QPS at 80% CPU to 1.0M QPS at 100% CPU
after io_uring was changed to use TIF_NOTIFY_SIGNAL. The time was all
spent hammering on the sighand lock, showing 57% of the CPU time there
[1].
There are further cleanups possible on top of this. One example is
TIF_PATCH_PENDING, where a patch already exists to use
TIF_NOTIFY_SIGNAL instead. Hopefully this will also lead to more
consolidation, but the work stands on its own as well"
[1] https://github.com/axboe/liburing/issues/215
* tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block: (28 commits)
io_uring: remove 'twa_signal_ok' deadlock work-around
kernel: remove checking for TIF_NOTIFY_SIGNAL
signal: kill JOBCTL_TASK_WORK
io_uring: JOBCTL_TASK_WORK is no longer used by task_work
task_work: remove legacy TWA_SIGNAL path
sparc: add support for TIF_NOTIFY_SIGNAL
riscv: add support for TIF_NOTIFY_SIGNAL
nds32: add support for TIF_NOTIFY_SIGNAL
ia64: add support for TIF_NOTIFY_SIGNAL
h8300: add support for TIF_NOTIFY_SIGNAL
c6x: add support for TIF_NOTIFY_SIGNAL
alpha: add support for TIF_NOTIFY_SIGNAL
xtensa: add support for TIF_NOTIFY_SIGNAL
arm: add support for TIF_NOTIFY_SIGNAL
microblaze: add support for TIF_NOTIFY_SIGNAL
hexagon: add support for TIF_NOTIFY_SIGNAL
csky: add support for TIF_NOTIFY_SIGNAL
openrisc: add support for TIF_NOTIFY_SIGNAL
sh: add support for TIF_NOTIFY_SIGNAL
um: add support for TIF_NOTIFY_SIGNAL
...
This cleans up two ancient timer features that were never completed in
the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
of clocksource implementations, the ARM EBSA110 platform. Rather than
changing to use modern timekeeping, we remove the platform entirely as
Russell no longer uses his machine and nobody else seems to have one
any more.
The conditional code for using arch_gettimeoffset() is removed as
a result.
For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
not using clockevent drivers: parisc, ia64, most of m68k, and one
Arm platform. These all do timer ticks slighly differently, and this
gets cleaned up to the point they at least all call the same helper
function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS'
in Kconfig, the polarity is now reversed, with the few remaining ones
selecting LEGACY_TIMER_TICK instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=QpNs
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann:
"This cleans up two ancient timer features that were never completed in
the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
of clocksource implementations, the ARM EBSA110 platform. Rather than
changing to use modern timekeeping, we remove the platform entirely as
Russell no longer uses his machine and nobody else seems to have one
any more.
The conditional code for using arch_gettimeoffset() is removed as a
result.
For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
not using clockevent drivers: parisc, ia64, most of m68k, and one Arm
platform. These all do timer ticks slighly differently, and this gets
cleaned up to the point they at least all call the same helper
function.
Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in
Kconfig, the polarity is now reversed, with the few remaining ones
selecting LEGACY_TIMER_TICK instead"
* tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
timekeeping: default GENERIC_CLOCKEVENTS to enabled
timekeeping: remove xtime_update
m68k: remove timer_interrupt() function
m68k: change remaining timers to legacy_timer_tick
m68k: m68328: use legacy_timer_tick()
m68k: sun3/sun3c: use legacy_timer_tick
m68k: split heartbeat out of timer function
m68k: coldfire: use legacy_timer_tick()
parisc: use legacy_timer_tick
ARM: rpc: use legacy_timer_tick
ia64: convert to legacy_timer_tick
timekeeping: add CONFIG_LEGACY_TIMER_TICK
timekeeping: remove arch_gettimeoffset
net: remove am79c961a driver
ARM: remove ebsa110 platform
This is a cleanup series from Nicholas Piggin, preparing for
later changes. The asm/mmu_context.h header are generalized
and common code moved to asm-gneneric/mmu_context.h.
This saves a bit of code and makes it easier to change in
the future.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=NpMX
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic mmu-context cleanup from Arnd Bergmann:
"This is a cleanup series from Nicholas Piggin, preparing for later
changes. The asm/mmu_context.h header are generalized and common code
moved to asm-gneneric/mmu_context.h.
This saves a bit of code and makes it easier to change in the future"
* tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (25 commits)
h8300: Fix generic mmu_context build
m68k: mmu_context: Fix Sun-3 build
xtensa: use asm-generic/mmu_context.h for no-op implementations
x86: use asm-generic/mmu_context.h for no-op implementations
um: use asm-generic/mmu_context.h for no-op implementations
sparc: use asm-generic/mmu_context.h for no-op implementations
sh: use asm-generic/mmu_context.h for no-op implementations
s390: use asm-generic/mmu_context.h for no-op implementations
riscv: use asm-generic/mmu_context.h for no-op implementations
powerpc: use asm-generic/mmu_context.h for no-op implementations
parisc: use asm-generic/mmu_context.h for no-op implementations
openrisc: use asm-generic/mmu_context.h for no-op implementations
nios2: use asm-generic/mmu_context.h for no-op implementations
nds32: use asm-generic/mmu_context.h for no-op implementations
mips: use asm-generic/mmu_context.h for no-op implementations
microblaze: use asm-generic/mmu_context.h for no-op implementations
m68k: use asm-generic/mmu_context.h for no-op implementations
ia64: use asm-generic/mmu_context.h for no-op implementations
hexagon: use asm-generic/mmu_context.h for no-op implementations
csky: use asm-generic/mmu_context.h for no-op implementations
...
Core:
- Consolidation and robustness changes for irq time accounting
- Cleanup and consolidation of irq stats
- Remove the fasteoi IPI flow which has been proved useless
- Provide an interface for converting legacy interrupt mechanism into
irqdomains
Drivers:
The rare event of not having completely new chip driver code, just new
DT bindings and extensions of existing drivers to accomodate new
variants!
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups
Thanks,
tglx
-----BEGIN PGP SIGNATURE-----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=iytv
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Generic interrupt and irqchips subsystem updates. Unusually, there is
not a single completely new irq chip driver, just new DT bindings and
extensions of existing drivers to accomodate new variants!
Core:
- Consolidation and robustness changes for irq time accounting
- Cleanup and consolidation of irq stats
- Remove the fasteoi IPI flow which has been proved useless
- Provide an interface for converting legacy interrupt mechanism into
irqdomains
Drivers:
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM
optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups"
* tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling
driver core: platform: Add devm_platform_get_irqs_affinity()
ACPI: Drop acpi_dev_irqresource_disabled()
resource: Add irqresource_disabled()
genirq/affinity: Add irq_update_affinity_desc()
irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge
irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device
platform-msi: Track shared domain allocation
irqchip/ti-sci-intr: Fix freeing of irqs
irqchip/ti-sci-inta: Fix printing of inta id on probe success
drivers/irqchip: Remove EZChip NPS interrupt controller
Revert "genirq: Add fasteoi IPI flow"
irqchip/hip04: Make IPIs use handle_percpu_devid_irq()
irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq()
irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()
irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq()
irqchip/ocelot: Add support for Jaguar2 platforms
irqchip/ocelot: Add support for Serval platforms
irqchip/ocelot: Add support for Luton platforms
irqchip/ocelot: prepare to support more SoC
...
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Remove the fasteoi IPI flow which has been proved useless
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=7Z24
-----END PGP SIGNATURE-----
Merge tag 'irqchip-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates for 5.11 from Marc Zyngier:
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Remove the fasteoi IPI flow which has been proved useless
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups
Link: https://lore.kernel.org/r/20201212135626.1479884-1-maz@kernel.org
- Consolidate all kmap_atomic() internals into a generic implementation
which builds the base for the kmap_local() API and make the
kmap_atomic() interface wrappers which handle the disabling/enabling of
preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a mapping
is established. It has to disable migration instead to guarantee that
the virtual address of the mapped slot is the same accross preemption.
- Provide better debug facilities: guard pages and enforced utilization
of the mapping mechanics on 64bit systems when the architecture allows
it.
- Provide the new kmap_local() API which can now be used to cleanup the
kmap_atomic() usage sites all over the place. Most of the usage sites
do not require the implicit disabling of preemption and pagefaults so
the penalty on 64bit and 32bit non-highmem systems is removed and quite
some of the code can be simplified. A wholesale conversion is not
possible because some usage depends on the implicit side effects and
some need to be cleaned up because they work around these side effects.
The migrate disable side effect is only effective on highmem systems
and when enforced debugging is enabled. On 64bit and 32bit non-highmem
systems the overhead is completely avoided.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/XyQwTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoUolD/9+R+BX96fGir+I8rG9dc3cbLw5meSi
0I/Nq3PToZMs2Iqv50DsoaPYHHz/M6fcAO9LRIgsE9jRbnY93GnsBM0wU9Y8yQaT
4wUzOG5WHaLDfqIkx/CN9coUl458oEiwOEbn79A2FmPXFzr7IpkufnV3ybGDwzwP
p73bjMJMPPFrsa9ig87YiYfV/5IAZHi82PN8Cq1v4yNzgXRP3Tg6QoAuCO84ZnWF
RYlrfKjcJ2xPdn+RuYyXolPtxr1hJQ0bOUpe4xu/UfeZjxZ7i1wtwLN9kWZe8CKH
+x4Lz8HZZ5QMTQ9sCHOLtKzu2MceMcpISzoQH4/aFQCNMgLn1zLbS790XkYiQCuR
ne9Cua+IqgYfGMG8cq8+bkU9HCNKaXqIBgPEKE/iHYVmqzCOqhW5Cogu4KFekf6V
Wi7pyyUdX2en8BAWpk5NHc8de9cGcc+HXMq2NIcgXjVWvPaqRP6DeITERTZLJOmz
XPxq5oPLGl7wdm7z+ICIaNApy8zuxpzb6sPLNcn7l5OeorViORlUu08AN8587wAj
FiVjp6ZYomg+gyMkiNkDqFOGDH5TMENpOFoB0hNNEyJwwS0xh6CgWuwZcv+N8aPO
HuS/P+tNANbD8ggT4UparXYce7YCtgOf3IG4GA3JJYvYmJ6pU+AZOWRoDScWq4o+
+jlfoJhMbtx5Gg==
=n71I
-----END PGP SIGNATURE-----
Merge tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull kmap updates from Thomas Gleixner:
"The new preemtible kmap_local() implementation:
- Consolidate all kmap_atomic() internals into a generic
implementation which builds the base for the kmap_local() API and
make the kmap_atomic() interface wrappers which handle the
disabling/enabling of preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a
mapping is established. It has to disable migration instead to
guarantee that the virtual address of the mapped slot is the same
across preemption.
- Provide better debug facilities: guard pages and enforced
utilization of the mapping mechanics on 64bit systems when the
architecture allows it.
- Provide the new kmap_local() API which can now be used to cleanup
the kmap_atomic() usage sites all over the place. Most of the usage
sites do not require the implicit disabling of preemption and
pagefaults so the penalty on 64bit and 32bit non-highmem systems is
removed and quite some of the code can be simplified. A wholesale
conversion is not possible because some usage depends on the
implicit side effects and some need to be cleaned up because they
work around these side effects.
The migrate disable side effect is only effective on highmem
systems and when enforced debugging is enabled. On 64bit and 32bit
non-highmem systems the overhead is completely avoided"
* tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
ARM: highmem: Fix cache_is_vivt() reference
x86/crashdump/32: Simplify copy_oldmem_page()
io-mapping: Provide iomap_local variant
mm/highmem: Provide kmap_local*
sched: highmem: Store local kmaps in task struct
x86: Support kmap_local() forced debugging
mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL
microblaze/mm/highmem: Add dropped #ifdef back
xtensa/mm/highmem: Make generic kmap_atomic() work correctly
mm/highmem: Take kmap_high_get() properly into account
highmem: High implementation details and document API
Documentation/io-mapping: Remove outdated blurb
io-mapping: Cleanup atomic iomap
mm/highmem: Remove the old kmap_atomic cruft
highmem: Get rid of kmap_types.h
xtensa/mm/highmem: Switch to generic kmap atomic
sparc/mm/highmem: Switch to generic kmap atomic
powerpc/mm/highmem: Switch to generic kmap atomic
nds32/mm/highmem: Switch to generic kmap atomic
...
uml_pm_wake() is unconditionally called from the SIGUSR1 wakeup
handler since that's in the userspace portion of UML, and thus
a bit tricky to ifdef out. Since pm_system_wakeup() can always
be called (but may be an empty inline), also simply always have
uml_pm_wake() to fix the build.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Lockdep (on 5.10-rc) points out that we're delivering IRQs while IRQs
are not even enabled, which clearly shouldn't happen. Defer the time
event IRQ delivery until they actually are enabled.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
If the sigio workaround needed to be applied to a file descriptor,
set_irq_wake() wouldn't work for it since it would get polled by
the thread instead of causing SIGIO, and thus could never really
cause a wakeup, since the thread notification FD wasn't marked as
being able to wake up the system.
Fix this by marking the thread's notification FD explicitly as a
wake source FD, i.e. not suppressing SIGIO for it in suspend. In
order to not cause spurious wakeups, we then need to remove all
FDs that shouldn't wake up the system from the polling thread. In
order to do this, add unlocked versions of ignore_sigio_fd() and
add_sigio_fd() (nothing else is happening in suspend, so this is
fine), and also modify ignore_sigio_fd() to return -ENOENT if the
FD wasn't originally in there. This doesn't matter because nothing
else currently checks the return value, but the irq code needs to
know which ones to restore the workaround for.
All told, this lets us use a timerfd for the RTC clock in the next
patch, which doesn't send SIGIO.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Due a bug - we never checked the time_travel_ext_free_until value - we
were always requesting time for every single scheduling. This adds up
since we make reading time cost 256ns, and it's a fairly common call.
Fix this.
While at it, also make reading time only cost something when we're not
currently waiting for our scheduling turn - otherwise things get mixed
up in a very confusing way. We should never get here, since we're not
actually running, but it's possible if you stick printk() or such into
the virtio code that must handle the external interrupts.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
xterm serial channel was leaking a fd used in setting up the
port helper
This bug is prehistoric - it predates switching to git. The "fixes"
header here is really just to mark all the versions we would like this to
apply to which is "Anything from the Cretaceous period onwards".
No dinosaurs were harmed in fixing this bug.
Fixes: b40997b872 ("um: drivers/xterm.c: fix a file descriptor leak")
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Fix a logical error in tty reading. We get 0 and errno == EAGAIN
on the first attempt to read from a closed file descriptor.
Compared to that a true EAGAIN is EAGAIN and -1.
If we check errno for EAGAIN first, before checking the return
value we miss the fact that the descriptor is closed.
This bug is as old as the driver. It was not showing up with
the original POLL based IRQ controller, because it was
producing multiple events. Switching to EPOLL unmasked it.
Fixes: ff6a17989c ("Epoll based IRQ controller")
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Ensure that file closes, connection closes, etc are propagated
as interrupts in the interrupt controller.
Fixes: ff6a17989c ("Epoll based IRQ controller")
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
We've been running into stack overflows in helper threads
corrupting memory (e.g. because somebody put printf() or
os_info() there), so to avoid those causing hard-to-debug
issues later on, allocate a guard page for helper thread
stacks and mark it read-only.
Unfortunately, the crash dump at that point is useless as
the stack tracer will try to backtrace the *kernel* thread,
not the helper thread, but at least we don't survive to a
random issue caused by corruption.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
For now, only support set_memory_ro()/rw() which we need for
the stack protection in the next patch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
If there is some kind of interrupt negotation or such then
it may happen that we send an update message multiple times,
avoid that in the interest of efficiency by storing the last
transmitted value and only sending a new update if it's not
the same as the last update.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
UML userspace fetches siginfo and passes it to signal handlers
in UML. This is needed only for some of the signals, because
key handlers like SIGIO make no use of this variable.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
With all the previous bits in place, we can now also support
suspend to RAM, in the sense that everything is suspended,
not just most, including userspace, processes like in s2idle.
Since um_idle_sleep() now waits forever, we can simply call
that to "suspend" the system.
As before, you can wake it up using SIGUSR1 since we're just
in a pause() call that only needs to return.
In order to implement selective resume from certain devices,
and not have any arbitrary device interrupt wake up, suspend
interrupts by removing SIGIO notification (O_ASYNC) from all
the FDs that are not supposed to wake up the system. However,
swap out the handler so we don't actually handle the SIGIO as
an interrupt.
Since we're in pause(), the mere act of receiving SIGIO wakes
us up, and then after things have been restored enough, re-set
O_ASYNC for all previously suspended FDs, reinstall the proper
SIGIO handler, and send SIGIO to self to process anything that
might now be pending.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
In order to be able to experiment with suspend in UML, add the
minimal work to be able to suspend (s2idle) an instance of UML,
and be able to wake it back up from that state with the USR1
signal sent to the main UML process.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
In time-travel mode, we've relied on read_persistent_clock64()
being called only once at system startup, but this is both the
right thing to call from the pseudo-RTC, and also gets called
by the timekeeping core during suspend/resume.
Thus, fix this to always fall make use of the time_travel_time
in any time-travel mode, initializing time_travel_start at boot
to the right value depending on the time-travel mode.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
There really is no reason to pass the amount of time we should
sleep, especially since it's just hard-coded to one second.
Additionally, one second isn't really all that long, and as we
are expecting to be woken up by a signal, we can sleep longer
and avoid doing some work every second, so replace the current
clock_nanosleep() with just an empty select() that can _only_
be woken up by a signal.
We can also remove the deliver_alarm() since we don't need to
do that when we got e.g. SIGIO that woke us up, and if we got
SIGALRM the signal handler will actually (have) run, so it's
just unnecessary extra work.
Similarly, in time-travel mode, just program the wakeup event
from idle to be S64_MAX, which is basically the most you could
ever simulate to. Of course, you should already have an event
in the list that's earlier and will cause a wakeup, normally
that's the regular timer interrupt, though in suspend it may
(later) also be an RTC event. Since actually getting to this
point would be a bug and you can't ever get out again, panic()
on it in the time control code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Reduce dynamic allocations (and thereby cache misses) by simply
embedding the registration data for IRQs in the irq_entry, we
never supported these being really dynamic anyway as only one
was ever allowed ("Trying to reregister ...").
Lockless behaviour is preserved by removing the FD from the poll
set appropriately, but we use reg->events to indicate whether or
not this entry is used, rather than dynamically allocating them.
Also port the list of IRQ entries to list_head instead of the
current open-coded singly-linked list implementation, just for
sanity.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
We don't actually use this in um_request_irq(), so it can
never be assigned. It's also not clear what that would be
useful for, so just remove it.
This results in quite a number of cleanups, all the way to
removing the "SIGIO on close" startup check, since the data
it assigns (pty_close_sigio) is not used anymore.
While at it, also make this an enum so we get a minimum of
type checking, and remove the IRQ_NONE hack in virtio since
we now no longer have the name twice.
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
We don't need an array of 4 entries to capture three and the
name 'MAX_IRQ_TYPE' really gets confusing as well. Remove it
and add a correct NUM_IRQ_TYPES, and use that correctly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This really shouldn't be called "irq_fd" since it doesn't
carry an fd. Well, it used to, apparently, but that struct
member is unused.
Rename it to "irq_reg" since it more accurately reflects a
registered interrupt, and remove the unused 'next' and 'fd'
members from the struct as well.
While at it, also move it to the implementation, it's not
used anywhere else, and the header file is shared with the
userspace components.
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
We don't use "SIGVTALRM", it's just SIGALRM. Clean up the naming.
While at it, fix the comment's grammar.
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This separates the devices, which is better for debug and for
later suspend/resume and wakeup support, since there we'll
have to separate which IRQs can wake up the system and which
cannot.
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
It's cumbersome and error-prone to keep adding fixed IRQ numbers,
and for proper device wakeup support for the virtio/vhost-user
support we need to have different IRQs for each device. Even if
in theory two IRQs (with and without wake) might be sufficient,
it's much easier to reason about it when we have dynamic number
assignment. It also makes it easier to add new devices that may
dynamically exist or depending on the configuration, etc.
Add support for this, up to 64 IRQs (the same limit as epoll FDs
we have right now). Since it's not easy to port all the existing
places to dynamic allocation (some data is statically initialized)
keep the low numbers are reserved for the existing hard-coded IRQ
numbers.
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
If we run out of space, return an error instead of 0.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Adds the ability to set the UBD device serial number from the
commandline, disabling the serial number functionality by default.
In some cases it may be useful to set a serial to the UBD device, such
that downstream users (i.e. udev) can use this information to better
describe the hardware to the user from the UML cmdline. In our case we
use this parameter to create some entries under /dev/disk/by-ubd-id/
for each of the UBD devices passed through the UML cmdline.
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The signal.c can't use heap for bit data located on stack. However,
by default a compiler warns us about overstepping stack frame size
threshold:
arch/um/os-Linux/signal.c: In function ‘sig_handler_common’:
arch/um/os-Linux/signal.c:51:1: warning: the frame size of 2960 bytes is larger than 2048 bytes [-Wframe-larger-than=]
51 | }
| ^
arch/um/os-Linux/signal.c: In function ‘timer_real_alarm_handler’:
arch/um/os-Linux/signal.c:95:1: warning: the frame size of 2960 bytes is larger than 2048 bytes [-Wframe-larger-than=]
95 | }
| ^
Due to above increase stack frame size threshold explicitly for signal.c
to avoid unnecessary warning.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Lockdep correctly complains that one shouldn't call um_free_irq()
with free_irq() inside under a spinlock since that will attempt
to acquire a mutex.
Rearrange the code to keep the list manipulations under the lock
while moving the actual freeing outside of it, to avoid this.
In particular, this removes the lockdep complaint at shutdown that
I was seeing with lockdep enabled.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: anton.ivanov@cambridgegreys.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Internally, UBD treats each physical IO segment as a separate command to
be submitted in the execution pipe. If the pipe returns a transient
error after a few segments have already been written, UBD will tell the
block layer to requeue the request, but there is no way to reclaim the
segments already submitted. When a new attempt to dispatch the request
is done, those segments already submitted will get duplicated, causing
the WARN_ON below in the best case, and potentially data corruption.
In my system, running a UML instance with 2GB of RAM and a 50M UBD disk,
I can reproduce the WARN_ON by simply running mkfs.fvat against the
disk on a freshly booted system.
There are a few ways to around this, like reducing the pressure on
the pipe by reducing the queue depth, which almost eliminates the
occurrence of the problem, increasing the pipe buffer size on the host
system, or by limiting the request to one physical segment, which causes
the block layer to submit way more requests to resolve a single
operation.
Instead, this patch modifies the format of a UBD command, such that all
segments are sent through a single element in the communication pipe,
turning the command submission atomic from the point of view of the
block layer. The new format has a variable size, depending on the
number of elements, and looks like this:
+------------+-----------+-----------+------------
| cmd_header | segment 0 | segment 1 | segment ...
+------------+-----------+-----------+------------
With this format, we push a pointer to cmd_header in the submission
pipe.
This has the advantage of reducing the memory footprint of executing a
single request, since it allow us to merge some fields in the header.
It is possible to reduce even further each segment memory footprint, by
merging bitmap_words and cow_offset, for instance, but this is not the
focus of this patch and is left as future work. One issue with the
patch is that for a big number of segments, we now perform one big
memory allocation instead of multiple small ones, but I wasn't able to
trigger any real issues or -ENOMEM because of this change, that wouldn't
be reproduced otherwise.
This was tested using fio with the verify-crc32 option, and by running
an ext4 filesystem over this UBD device.
The original WARN_ON was:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at lib/refcount.c:28 refcount_warn_saturate+0x13f/0x141
refcount_t: underflow; use-after-free.
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.5.0-rc6-00002-g2a5bb2cf75c8 #346
Stack:
6084eed0 6063dc77 00000009 6084ef60
00000000 604b8d9f 6084eee0 6063dcbc
6084ef40 6006ab8d e013d780 1c00000000
Call Trace:
[<600a0c1c>] ? printk+0x0/0x94
[<6004a888>] show_stack+0x13b/0x155
[<6063dc77>] ? dump_stack_print_info+0xdf/0xe8
[<604b8d9f>] ? refcount_warn_saturate+0x13f/0x141
[<6063dcbc>] dump_stack+0x2a/0x2c
[<6006ab8d>] __warn+0x107/0x134
[<6008da6c>] ? wake_up_process+0x17/0x19
[<60487628>] ? blk_queue_max_discard_sectors+0x0/0xd
[<6006b05f>] warn_slowpath_fmt+0xd1/0xdf
[<6006af8e>] ? warn_slowpath_fmt+0x0/0xdf
[<600acc14>] ? raw_read_seqcount_begin.constprop.0+0x0/0x15
[<600619ae>] ? os_nsecs+0x1d/0x2b
[<604b8d9f>] refcount_warn_saturate+0x13f/0x141
[<6048bc8f>] refcount_sub_and_test.constprop.0+0x2f/0x37
[<6048c8de>] blk_mq_free_request+0xf1/0x10d
[<6048ca06>] __blk_mq_end_request+0x10c/0x114
[<6005ac0f>] ubd_intr+0xb5/0x169
[<600a1a37>] __handle_irq_event_percpu+0x6b/0x17e
[<600a1b70>] handle_irq_event_percpu+0x26/0x69
[<600a1bd9>] handle_irq_event+0x26/0x34
[<600a1bb3>] ? handle_irq_event+0x0/0x34
[<600a5186>] ? unmask_irq+0x0/0x37
[<600a57e6>] handle_edge_irq+0xbc/0xd6
[<600a131a>] generic_handle_irq+0x21/0x29
[<60048f6e>] do_IRQ+0x39/0x54
[...]
---[ end trace c6e7444e55386c0f ]---
Cc: Christopher Obbard <chris.obbard@collabora.com>
Reported-by: Martyn Welch <martyn@collabora.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Since the time-travel rework, basic time-travel mode hasn't worked
properly, but there's no longer a need for this WARN_ON() so just
remove it and thereby fix things.
Cc: stable@vger.kernel.org
Fixes: 4b786e24ca ("um: time-travel: Rewrite as an event scheduler")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
asprintf is not compatible with the existing uml memory allocation
mechanism. Its use on the "user" side of UML results in a corrupt slab
state.
Fixes: 0d4e5ac7e7 ("um: remove uses of variable length arrays")
Cc: stable@vger.kernel.org
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Wire up TIF_NOTIFY_SIGNAL handling for um.
Cc: linux-um@lists.infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The UML random driver creates a dummy device under the guest,
/dev/hw_random. When this file is read from the guest, the driver
reads from the host machine's /dev/random, in-turn reading from
the host kernel's entropy pool. This entropy pool could have been
filled by a hardware random number generator or just the host
kernel's internal software entropy generator.
Currently the driver does not fill the guests kernel entropy pool,
this requires a userspace tool running inside the guest (like
rng-tools) to read from the dummy device provided by this driver,
which then would fill the guest's internal entropy pool.
This all seems quite pointless when we are already reading from an
entropy pool, so this patch aims to register the device as a hwrng
device using the hwrng-core framework. This not only improves and
cleans up the driver, but also fills the guest's entropy pool
without having to resort to using extra userspace tools in the guest.
This is typically a nuisance when booting a guest: the random pool
takes a long time (~200s) to build up enough entropy since the dummy
hwrng is not used to fill the guest's pool.
This port was originally attempted by Alexander Neville "dark" (in CC,
discussion in Link), but the conversation there stalled since the
handling of -EAGAIN errors were no removed and longer handled by the
driver. This patch attempts to use the existing method of error
handling but utilises the new hwrng core.
The issue can be noticed when booting a UML guest:
[ 2.560000] random: fast init done
[ 214.000000] random: crng init done
With the patch applied, filling the pool becomes a lot quicker:
[ 2.560000] random: fast init done
[ 12.000000] random: crng init done
Cc: Alexander Neville <dark@volatile.bz>
Link: https://lore.kernel.org/lkml/20190828204609.02a7ff70@TheDarkness/
Link: https://lore.kernel.org/lkml/20190829135001.6a5ff940@TheDarkness.local/
Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
idle path. Similar to the entry path the low level idle functions have to
be non-instrumentable.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/DpAUTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoXSLD/9klc0YimnEnROW6Q5Svb2IcyIutmXF
bOIY1bYYoKILOBj3wyvDUhmdMuq5zh7H9yG11hO8MaVVWVQcLcOMLdHTYm9dcdmF
xQk33+xqjuhRShB+nEmC9ayYtWogtH6W6uZ6WDtF9ZltMKU85n5ddGJ/Fvo+HoCb
NbOdHGJdJ3/3ZCeHnxOnxM+5/GwjkBuccTV/tXmb3yXrfU9DBySyQ4/UchcpF43w
LcEb0kiQbpZsBTByKJOQV8+RR654S0sILlvRwVXpmj94vrgGwhlVk1/9rz7tkOhF
ksoo1mTVu75LMt22G/hXxE63787yRvFdHjapf0+kCOAuhl992NK+xlGDH8o9DXcu
9y73D4bI0HnDFs20w6vs20iLvxECJiYHJqlgR5ZwFUToceaNgtiYr8kzuD7Zbae1
KG2E7BuNSwHWMtf97fGn44GZknPEOaKdDn4Wv6/bvKHxLm77qe11RKF70Stcz2AI
am13KmQzzsHGF5qNWwpElRUxSdxfJMR66RnOdTQULGrRedaZTFol/y2pnVzTSe3k
SZnlpL5kE7y92UYDogPb5wWA7b+YkJN0OdSkRFy1FH26ZG8E4M7ZJ2tql5Sw7pGM
lsTjXpAUphnK5rz7QcYE8KAZWj//fIAcElIrvdklVcBnS3IqjfksYW27B64133vx
cT1B/lA1PHXj6Q==
=raED
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two more places which invoke tracing from RCU disabled regions in the
idle path.
Similar to the entry path the low level idle functions have to be
non-instrumentable"
* tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
intel_idle: Fix intel_idle() vs tracing
sched/idle: Fix arch_cpu_idle() vs tracing
We call arch_cpu_idle() with RCU disabled, but then use
local_irq_{en,dis}able(), which invokes tracing, which relies on RCU.
Switch all arch_cpu_idle() implementations to use
raw_local_irq_{en,dis}able() and carefully manage the
lockdep,rcu,tracing state like we do in entry.
(XXX: we really should change arch_cpu_idle() to not return with
interrupts enabled)
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/20201120114925.594122626@infradead.org
Commit b2b29d6d01 ("mm: account PMD tables like PTE tables") uncovered
a bug in uml, we forgot to call the destructor.
While we are here, give x a sane name.
Reported-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Co-developed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
The header is not longer used and on alpha, ia64, openrisc, parisc and um
it was completely unused anyway as these architectures have no highmem
support.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201103095858.422094352@linutronix.de
Almost all machines use GENERIC_CLOCKEVENTS, so it feels wrong to
require each one to select that symbol manually.
Instead, enable it whenever CONFIG_LEGACY_TIMER_TICK is disabled as
a simplification. It should be possible to select both
GENERIC_CLOCKEVENTS and LEGACY_TIMER_TICK from an architecture now
and decide at runtime between the two.
For the clockevents arch-support.txt file, this means that additional
architectures are marked as TODO when they have at least one machine
that still uses LEGACY_TIMER_TICK, rather than being marked 'ok' when
at least one machine has been converted. This means that both m68k and
arm (for riscpc) revert to TODO.
At this point, we could just always enable CONFIG_GENERIC_CLOCKEVENTS
rather than leaving it off when not needed. I built an m68k
defconfig kernel (using gcc-10.1.0) and found that this would add
around 5.5KB in kernel image size:
text data bss dec hex filename
3861936 1092236 196656 5150828 4e986c obj-m68k/vmlinux-no-clockevent
3866201 1093832 196184 5156217 4ead79 obj-m68k/vmlinux-clockevent
On Arm (MACH_RPC), that difference appears to be twice as large,
around 11KB on top of an 6MB vmlinux.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: linux-um@lists.infradead.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A couple of um files ended up not including the header file that defines
the __section() macro, and the simplest fix is to just revert the change
for those files.
Fixes: 33def8498f treewide: Convert macro and uses of __section(foo) to __section("foo")
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=aVWo
-----END PGP SIGNATURE-----
Merge tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block
Pull arch task_work cleanups from Jens Axboe:
"Two cleanups that don't fit other categories:
- Finally get the task_work_add() cleanup done properly, so we don't
have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates
all callers, and also fixes up the documentation for
task_work_add().
- While working on some TIF related changes for 5.11, this
TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch
duplication for how that is handled"
* tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block:
task_work: cleanup notification modes
tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the module
linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=tZRN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the
module linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: Use uname for LINUX_COMPILE_HOST detection
kbuild: Only add -fno-var-tracking-assignments for old GCC versions
kbuild: remove leftover comment for filechk utility
treewide: remove DISABLE_LTO
kbuild: deb-pkg: clean up package name variables
kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
kbuild: enforce -Werror=return-type
scripts: remove namespace.pl
builddeb: Add support for all required debian/rules targets
builddeb: Enable rootless builds
builddeb: Pass -n to gzip for reproducible packages
kbuild: split the build log of kallsyms
kbuild: explicitly specify the build id style
scripts/setlocalversion: make git describe output more reliable
kbuild: remove cc-option test of -Werror=date-time
kbuild: remove cc-option test of -fno-stack-check
kbuild: remove cc-option test of -fno-strict-overflow
kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
kbuild: do not create built-in objects for external module builds
...
Pull initial set_fs() removal from Al Viro:
"Christoph's set_fs base series + fixups"
* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Allow a NULL pos pointer to __kernel_read
fs: Allow a NULL pos pointer to __kernel_write
powerpc: remove address space overrides using set_fs()
powerpc: use non-set_fs based maccess routines
x86: remove address space overrides using set_fs()
x86: make TASK_SIZE_MAX usable from assembly code
x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h
lkdtm: remove set_fs-based tests
test_bitmap: remove user bitmap tests
uaccess: add infrastructure for kernel builds with set_fs()
fs: don't allow splice read/write without explicit ops
fs: don't allow kernel reads and writes without iter ops
sysctl: Convert to iter interfaces
proc: add a read_iter method to proc proc_ops
proc: cleanup the compat vs no compat file ops
proc: remove a level of indentation in proc_get_inode
- Improve support for non-glibc systems
- Vector: Add support for scripting and dynamic tap devices
- Various fixes for the vector networking driver
- Various fixes for time travel mode
-----BEGIN PGP SIGNATURE-----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=OzDf
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- Improve support for non-glibc systems
- Vector: Add support for scripting and dynamic tap devices
- Various fixes for the vector networking driver
- Various fixes for time travel mode
* tag 'for-linus-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: vector: Add dynamic tap interfaces and scripting
um: Clean up stacktrace dump
um: Fix incorrect assumptions about max pid length
um: Remove dead usage of TIF_IA32
um: Remove redundant NULL check
um: change sigio_spinlock to a mutex
um: time-travel: Return the sequence number in ACK messages
um: time-travel: Fix IRQ handling in time_travel_handle_message()
um: Allow static linking for non-glibc implementations
um: Some fixes to build UML with musl
um: vector: Use GFP_ATOMIC under spin lock
um: Fix null pointer dereference in vector_user_bpf
All the callers currently do this, clean it up and move the clearing
into tracehook_notify_resume() instead.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- heavily refactor seccomp selftests (and clone3 selftests dependency) to
fix powerpc (Kees Cook, Thadeu Lima de Souza Cascardo)
- fix style issue in selftests (Zou Wei)
- upgrade "unknown action" from KILL_THREAD to KILL_PROCESS (Rich Felker)
- replace task_pt_regs(current) with current_pt_regs() (Denis Efremov)
- fix corner-case race in USER_NOTIF (Jann Horn)
- make CONFIG_SECCOMP no longer per-arch (YiFei Zhu)
-----BEGIN PGP SIGNATURE-----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=a4u2
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"The bulk of the changes are with the seccomp selftests to accommodate
some powerpc-specific behavioral characteristics. Additional cleanups,
fixes, and improvements are also included:
- heavily refactor seccomp selftests (and clone3 selftests
dependency) to fix powerpc (Kees Cook, Thadeu Lima de Souza
Cascardo)
- fix style issue in selftests (Zou Wei)
- upgrade "unknown action" from KILL_THREAD to KILL_PROCESS (Rich
Felker)
- replace task_pt_regs(current) with current_pt_regs() (Denis
Efremov)
- fix corner-case race in USER_NOTIF (Jann Horn)
- make CONFIG_SECCOMP no longer per-arch (YiFei Zhu)"
* tag 'seccomp-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
seccomp: Make duplicate listener detection non-racy
seccomp: Move config option SECCOMP to arch/Kconfig
selftests/clone3: Avoid OS-defined clone_args
selftests/seccomp: powerpc: Set syscall return during ptrace syscall exit
selftests/seccomp: Allow syscall nr and ret value to be set separately
selftests/seccomp: Record syscall during ptrace entry
selftests/seccomp: powerpc: Fix seccomp return value testing
selftests/seccomp: Remove SYSCALL_NUM_RET_SHARE_REG in favor of SYSCALL_RET_SET
selftests/seccomp: Avoid redundant register flushes
selftests/seccomp: Convert REGSET calls into ARCH_GETREG/ARCH_SETREG
selftests/seccomp: Convert HAVE_GETREG into ARCH_GETREG/ARCH_SETREG
selftests/seccomp: Remove syscall setting #ifdefs
selftests/seccomp: mips: Remove O32-specific macro
selftests/seccomp: arm64: Define SYSCALL_NUM_SET macro
selftests/seccomp: arm: Define SYSCALL_NUM_SET macro
selftests/seccomp: mips: Define SYSCALL_NUM_SET macro
selftests/seccomp: Provide generic syscall setting macro
selftests/seccomp: Refactor arch register macros to avoid xtensa special case
selftests/seccomp: Use __NR_mknodat instead of __NR_mknod
selftests/seccomp: Use bitwise instead of arithmetic operator for flags
...
because the heuristics that various linkers & compilers use to handle them
(include these bits into the output image vs discarding them silently)
are both highly idiosyncratic and also version dependent.
Instead of this historically problematic mess, this tree by Kees Cook (et al)
adds build time asserts and build time warnings if there's any orphan section
in the kernel or if a section is not sized as expected.
And because we relied on so many silent assumptions in this area, fix a metric
ton of dependencies and some outright bugs related to this, before we can
finally enable the checks on the x86, ARM and ARM64 platforms.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=fXAw
-----END PGP SIGNATURE-----
Merge tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull orphan section checking from Ingo Molnar:
"Orphan link sections were a long-standing source of obscure bugs,
because the heuristics that various linkers & compilers use to handle
them (include these bits into the output image vs discarding them
silently) are both highly idiosyncratic and also version dependent.
Instead of this historically problematic mess, this tree by Kees Cook
(et al) adds build time asserts and build time warnings if there's any
orphan section in the kernel or if a section is not sized as expected.
And because we relied on so many silent assumptions in this area, fix
a metric ton of dependencies and some outright bugs related to this,
before we can finally enable the checks on the x86, ARM and ARM64
platforms"
* tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/boot/compressed: Warn on orphan section placement
x86/build: Warn on orphan section placement
arm/boot: Warn on orphan section placement
arm/build: Warn on orphan section placement
arm64/build: Warn on orphan section placement
x86/boot/compressed: Add missing debugging sections to output
x86/boot/compressed: Remove, discard, or assert for unwanted sections
x86/boot/compressed: Reorganize zero-size section asserts
x86/build: Add asserts for unwanted sections
x86/build: Enforce an empty .got.plt section
x86/asm: Avoid generating unused kprobe sections
arm/boot: Handle all sections explicitly
arm/build: Assert for unwanted sections
arm/build: Add missing sections
arm/build: Explicitly keep .ARM.attributes sections
arm/build: Refactor linker script headers
arm64/build: Assert for unwanted sections
arm64/build: Add missing DWARF sections
arm64/build: Use common DISCARDS in linker script
arm64/build: Remove .eh_frame* sections due to unwind tables
...
Provide functionality roughly compatible with the existing qemu
ifup scripting:
* invocation of an ifup script. The interface name is passed as the
first and only argument
* allocating tap interfaces on the fly if they are not explicitly
specified
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
We currently get a few stray newlines, due to the interaction
between printk() and the code here. Remove a few explicit
newline prints to neaten the output.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
pids are no longer limited to 16-bits, bump to 32-bits,
ie. 9 decimal characters. Additionally sizeof("/") already
returns 2 - ie. it already accounts for trailing zero.
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Linux UM Mailing List <linux-um@lists.infradead.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Fix below warnings reported by coccicheck:
./arch/um/drivers/vector_user.c:403:2-7: WARNING: NULL check before some freeing functions is not needed.
Fixes: bc8f8e4e6e ("um: Add a generic "fd" vector transport")
Signed-off-by: Li Heng <liheng40@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Lockdep complains at boot:
=============================
[ BUG: Invalid wait context ]
5.7.0-05093-g46d91ecd597b #98 Not tainted
-----------------------------
swapper/1 is trying to lock:
0000000060931b98 (&desc[i].request_mutex){+.+.}-{3:3}, at: __setup_irq+0x11d/0x623
other info that might help us debug this:
context-{4:4}
1 lock held by swapper/1:
#0: 000000006074fed8 (sigio_spinlock){+.+.}-{2:2}, at: sigio_lock+0x1a/0x1c
stack backtrace:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.0-05093-g46d91ecd597b #98
Stack:
7fa4fab0 6028dfd1 0000002a 6008bea5
7fa50700 7fa50040 7fa4fac0 6028e016
7fa4fb50 6007f6da 60959c18 00000000
Call Trace:
[<60023a0e>] show_stack+0x13b/0x155
[<6028e016>] dump_stack+0x2a/0x2c
[<6007f6da>] __lock_acquire+0x515/0x15f2
[<6007eb50>] lock_acquire+0x245/0x273
[<6050d9f1>] __mutex_lock+0xbd/0x325
[<6050dc76>] mutex_lock_nested+0x1d/0x1f
[<6008e27e>] __setup_irq+0x11d/0x623
[<6008e8ed>] request_threaded_irq+0x169/0x1a6
[<60021eb0>] um_request_irq+0x1ee/0x24b
[<600234ee>] write_sigio_irq+0x3b/0x76
[<600383ca>] sigio_broken+0x146/0x2e4
[<60020bd8>] do_one_initcall+0xde/0x281
Because we hold sigio_spinlock and then get into requesting
an interrupt with a mutex.
Change the spinlock to a mutex to avoid that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
For external time travel, the protocol says to return the
incoming sequence number in the ACK message to aid debugging,
so do that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
As the comment here indicates, we need to do the polling in the
idle loop without blocking interrupts, since interrupts can be
vhost-user messages that we must process even while in our idle
loop.
I don't know why I explained one thing and implemented another,
but we have indeed observed random hangs due to this, depending
on the timing of the messages.
Fixes: 88ce642492 ("um: Implement time-travel=ext")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
It is possible to produce a statically linked UML binary with UML_NET_VECTOR,
UML_NET_VDE and UML_NET_PCAP options enabled using alternative libc
implementations, which do not rely on NSS, such as musl.
Allow static linking in this case.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
musl toolchain and headers are a bit more strict. These fixes enable building
UML with musl as well as seem not to break on glibc.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Use GFP_ATOMIC instead of GFP_KERNEL under spin lock to fix possible
sleep-in-atomic-context bugs.
Fixes: 9807019a62 ("um: Loadable BPF "Firmware" for vector drivers")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The bpf_prog is being checked for !NULL after uml_kmalloc
but later its used directly for example:
bpf_prog->filter = bpf and is also later returned upon
success. Fix this, do a NULL check and return right away.
Signed-off-by: Gaurav Singh <gaurav1086@gmail.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
In order to make adding configurable features into seccomp easier,
it's better to have the options at one single location, considering
especially that the bulk of seccomp code is arch-independent. An quick
look also show that many SECCOMP descriptions are outdated; they talk
about /proc rather than prctl.
As a result of moving the config option and keeping it default on,
architectures arm, arm64, csky, riscv, sh, and xtensa did not have SECCOMP
on by default prior to this and SECCOMP will be default in this change.
Architectures microblaze, mips, powerpc, s390, sh, and sparc have an
outdated depend on PROC_FS and this dependency is removed in this change.
Suggested-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/lkml/CAG48ez1YWz9cnp08UZgeieYRhHdqh-ch7aNwc4JRBnGyrmgfMg@mail.gmail.com/
Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu>
[kees: added HAVE_ARCH_SECCOMP help text, tweaked wording]
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/9ede6ef35c847e58d61e476c6a39540520066613.1600951211.git.yifeifz2@illinois.edu
There was a request to preprocess the module linker script like we
do for the vmlinux one. (https://lkml.org/lkml/2020/8/21/512)
The difference between vmlinux.lds and module.lds is that the latter
is needed for external module builds, thus must be cleaned up by
'make mrproper' instead of 'make clean'. Also, it must be created
by 'make modules_prepare'.
You cannot put it in arch/$(SRCARCH)/kernel/, which is cleaned up by
'make clean'. I moved arch/$(SRCARCH)/kernel/module.lds to
arch/$(SRCARCH)/include/asm/module.lds.h, which is included from
scripts/module.lds.S.
scripts/module.lds is fine because 'make clean' keeps all the
build artifacts under scripts/.
You can add arch-specific sections in <asm/module.lds.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Add a CONFIG_SET_FS option that is selected by architecturess that
implement set_fs, which is all of them initially. If the option is not
set stubs for routines related to overriding the address space are
provided so that architectures can start to opt out of providing set_fs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The .comment section doesn't belong in STABS_DEBUG. Split it out into a
new macro named ELF_DETAILS. This will gain other non-debug sections
that need to be accounted for when linking with --orphan-handling=warn.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-arch@vger.kernel.org
Link: https://lore.kernel.org/r/20200821194310.3089815-5-keescook@chromium.org
changes to arch/sh.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJfODUiAAoJELcQ+SIFb8Hau0wH/iPeZyv0EhIwL41OPrWhm5wb
26MNWPvPjYIpKVpr0HMXiffILv595ntvrH0Ujnh1+e8J2kRj0eT+T91UkoyGSfav
oWmjgcG3NRK6p9882Oo8Xavjr1cTTclOmmDInR4lpAcfIBXkeq2eX0R1h2IuGdNM
idGlXhJMkgV+xTlgZy7pYmw5pvFMqL5j7fAUQxm0UoY9kbu8Ac4bOR5WrqtFpkjt
xTh9141YvSSfpRx9uMzrQLuUYGzGePhnjUGSUf/b1deYG/33lNtzhHr+QMK6BpXr
zdhFalJP40+m+2tG0nCBpAIZcWiOLGb23in5n/trFx3BGZfUf5EKnhZEGUYeE7Q=
=XWDn
-----END PGP SIGNATURE-----
Merge tag 'sh-for-5.9' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker:
"Cleanup, SECCOMP_FILTER support, message printing fixes, and other
changes to arch/sh"
* tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits)
sh: landisk: Add missing initialization of sh_io_port_base
sh: bring syscall_set_return_value in line with other architectures
sh: Add SECCOMP_FILTER
sh: Rearrange blocks in entry-common.S
sh: switch to copy_thread_tls()
sh: use the generic dma coherent remap allocator
sh: don't allow non-coherent DMA for NOMMU
dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig
sh: unexport register_trapped_io and match_trapped_io_handler
sh: don't include <asm/io_trapped.h> in <asm/io.h>
sh: move the ioremap implementation out of line
sh: move ioremap_fixed details out of <asm/io.h>
sh: remove __KERNEL__ ifdefs from non-UAPI headers
sh: sort the selects for SUPERH alphabetically
sh: remove -Werror from Makefiles
sh: Replace HTTP links with HTTPS ones
arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA*
sh: stacktrace: Remove stacktrace_ops.stack()
sh: machvec: Modernize printing of kernel messages
sh: pci: Modernize printing of kernel messages
...
Merge more updates from Andrew Morton:
- most of the rest of MM (memcg, hugetlb, vmscan, proc, compaction,
mempolicy, oom-kill, hugetlbfs, migration, thp, cma, util,
memory-hotplug, cleanups, uaccess, migration, gup, pagemap),
- various other subsystems (alpha, misc, sparse, bitmap, lib, bitops,
checkpatch, autofs, minix, nilfs, ufs, fat, signals, kmod, coredump,
exec, kdump, rapidio, panic, kcov, kgdb, ipc).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (164 commits)
mm/gup: remove task_struct pointer for all gup code
mm: clean up the last pieces of page fault accountings
mm/xtensa: use general page fault accounting
mm/x86: use general page fault accounting
mm/sparc64: use general page fault accounting
mm/sparc32: use general page fault accounting
mm/sh: use general page fault accounting
mm/s390: use general page fault accounting
mm/riscv: use general page fault accounting
mm/powerpc: use general page fault accounting
mm/parisc: use general page fault accounting
mm/openrisc: use general page fault accounting
mm/nios2: use general page fault accounting
mm/nds32: use general page fault accounting
mm/mips: use general page fault accounting
mm/microblaze: use general page fault accounting
mm/m68k: use general page fault accounting
mm/ia64: use general page fault accounting
mm/hexagon: use general page fault accounting
mm/csky: use general page fault accounting
...
Here're the last pieces of page fault accounting that were still done
outside handle_mm_fault() where we still have regs==NULL when calling
handle_mm_fault():
arch/powerpc/mm/copro_fault.c: copro_handle_mm_fault
arch/sparc/mm/fault_32.c: force_user_fault
arch/um/kernel/trap.c: handle_page_fault
mm/gup.c: faultin_page
fixup_user_fault
mm/hmm.c: hmm_vma_fault
mm/ksm.c: break_ksm
Some of them has the issue of duplicated accounting for page fault
retries. Some of them didn't do the accounting at all.
This patch cleans all these up by letting handle_mm_fault() to do per-task
page fault accounting even if regs==NULL (though we'll still skip the perf
event accountings). With that, we can safely remove all the outliers now.
There's another functional change in that now we account the page faults
to the caller of gup, rather than the task_struct that passed into the gup
code. More information of this can be found at [1].
After this patch, below things should never be touched again outside
handle_mm_fault():
- task_struct.[maj|min]_flt
- PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN]
[1] https://lore.kernel.org/lkml/CAHk-=wj_V2Tps2QrMn20_W0OJF9xqNh52XSGA42s-ZJ8Y+GyKw@mail.gmail.com/
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200707225021.200906-25-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: Page fault accounting cleanups", v5.
This is v5 of the pf accounting cleanup series. It originates from Gerald
Schaefer's report on an issue a week ago regarding to incorrect page fault
accountings for retried page fault after commit 4064b98270 ("mm: allow
VM_FAULT_RETRY for multiple times"):
https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/
What this series did:
- Correct page fault accounting: we do accounting for a page fault
(no matter whether it's from #PF handling, or gup, or anything else)
only with the one that completed the fault. For example, page fault
retries should not be counted in page fault counters. Same to the
perf events.
- Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf
event is used in an adhoc way across different archs.
Case (1): for many archs it's done at the entry of a page fault
handler, so that it will also cover e.g. errornous faults.
Case (2): for some other archs, it is only accounted when the page
fault is resolved successfully.
Case (3): there're still quite some archs that have not enabled
this perf event.
Since this series will touch merely all the archs, we unify this
perf event to always follow case (1), which is the one that makes most
sense. And since we moved the accounting into handle_mm_fault, the
other two MAJ/MIN perf events are well taken care of naturally.
- Unify definition of "major faults": the definition of "major
fault" is slightly changed when used in accounting (not
VM_FAULT_MAJOR). More information in patch 1.
- Always account the page fault onto the one that triggered the page
fault. This does not matter much for #PF handlings, but mostly for
gup. More information on this in patch 25.
Patchset layout:
Patch 1: Introduced the accounting in handle_mm_fault(), not enabled.
Patch 2-23: Enable the new accounting for arch #PF handlers one by one.
Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.)
Patch 25: Cleanup GUP task_struct pointer since it's not needed any more
This patch (of 25):
This is a preparation patch to move page fault accountings into the
general code in handle_mm_fault(). This includes both the per task
flt_maj/flt_min counters, and the major/minor page fault perf events. To
do this, the pt_regs pointer is passed into handle_mm_fault().
PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault
handlers.
So far, all the pt_regs pointer that passed into handle_mm_fault() is
NULL, which means this patch should have no intented functional change.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com
Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
IRQ bypass support for vdpa and IFC
MLX5 vdpa driver
Endian-ness fixes for virtio drivers
Misc other fixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl8yVEwPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpNPEH/0Dtq1s1V4r/kxtLUoMophv9wuORpWCr98BQ
2aOveTmwTOVdZVOiw2tzTgO9nbWx+cL2HvkU7Aajfpz5hh93Z2VOo2n4a7hBC79f
rlc3GXiG+pMk5RfmqGofIHTU+D6ony4D5SXlUDurLdtEwunyuqZwABiWkZjdclZJ
bv90IL8Upzbz0rxYr7k3z8UepdOCt7r4QS/o7STHZBjJRyylxmO/R2yTnh6PtpRK
Q/z35wJBJ3SKc8X3Fi0VOOSeGNZOiypkkl9ZnLVY5lExNAU1+2MMn2UK119SlCDV
MSxb7quYFF4cksXH1g77GMBNi1uADRh1dtFMZdkKhZGljGxKLxo=
=6VTZ
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- IRQ bypass support for vdpa and IFC
- MLX5 vdpa driver
- Endianness fixes for virtio drivers
- Misc other fixes
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (71 commits)
vdpa/mlx5: fix up endian-ness for mtu
vdpa: Fix pointer math bug in vdpasim_get_config()
vdpa/mlx5: Fix pointer math in mlx5_vdpa_get_config()
vdpa/mlx5: fix memory allocation failure checks
vdpa/mlx5: Fix uninitialised variable in core/mr.c
vdpa_sim: init iommu lock
virtio_config: fix up warnings on parisc
vdpa/mlx5: Add VDPA driver for supported mlx5 devices
vdpa/mlx5: Add shared memory registration code
vdpa/mlx5: Add support library for mlx5 VDPA implementation
vdpa/mlx5: Add hardware descriptive header file
vdpa: Modify get_vq_state() to return error code
net/vdpa: Use struct for set/get vq state
vdpa: remove hard coded virtq num
vdpasim: support batch updating
vhost-vdpa: support IOTLB batching hints
vhost-vdpa: support get/set backend features
vhost: generialize backend features setting/getting
vhost-vdpa: refine ioctl pre-processing
vDPA: dont change vq irq after DRIVER_OK
...
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=bkNQ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
* tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base
kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
kbuild: introduce hostprogs-always-y and userprogs-always-y
kbuild: sort hostprogs before passing it to ifneq
kbuild: move host .so build rules to scripts/gcc-plugins/Makefile
kbuild: Replace HTTP links with HTTPS ones
kbuild: trace functions in subdirectories of lib/
kbuild: introduce ccflags-remove-y and asflags-remove-y
kbuild: do not export LDFLAGS_vmlinux
kbuild: always create directories of targets
powerpc/boot: add DTB to 'targets'
kbuild: buildtar: add dtbs support
kbuild: remove cc-option test of -ffreestanding
kbuild: remove cc-option test of -fno-stack-protector
Revert "kbuild: Create directory for target DTB"
kbuild: run the checker after the compiler
Most architectures define pgd_free() as a wrapper for free_page().
Provide a generic version in asm-generic/pgalloc.h and enable its use for
most architectures.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-7-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For most architectures that support >2 levels of page tables,
pmd_alloc_one() is a wrapper for __get_free_pages(), sometimes with
__GFP_ZERO and sometimes followed by memset(0) instead.
More elaborate versions on arm64 and x86 account memory for the user page
tables and call to pgtable_pmd_page_ctor() as the part of PMD page
initialization.
Move the arm64 version to include/asm-generic/pgalloc.h and use the
generic version on several architectures.
The pgtable_pmd_page_ctor() is a NOP when ARCH_ENABLE_SPLIT_PMD_PTLOCK is
not enabled, so there is no functional change for most architectures
except of the addition of __GFP_ACCOUNT for allocation of user page
tables.
The pmd_free() is a wrapper for free_page() in all the cases, so no
functional change here.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-5-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the large set of TTY and Serial driver patches for 5.9-rc1.
Lots of bugfixes in here, thanks to syzbot fuzzing for serial and vt and
console code.
Other highlights include:
- much needed vt/vc code cleanup from Jiri Slaby
- 8250 driver fixes and additions
- various serial driver updates and feature enhancements
- locking cleanup for serial/console initializations
- other minor cleanups
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXyv30A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynW+gCgv+OqxT0jeNRAMSQcpMvP3wTBMKIAn1StfjJ4
y8uwZuQQimD49uj8XtDq
=bKSv
-----END PGP SIGNATURE-----
Merge tag 'tty-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the large set of TTY and Serial driver patches for 5.9-rc1.
Lots of bugfixes in here, thanks to syzbot fuzzing for serial and vt
and console code.
Other highlights include:
- much needed vt/vc code cleanup from Jiri Slaby
- 8250 driver fixes and additions
- various serial driver updates and feature enhancements
- locking cleanup for serial/console initializations
- other minor cleanups
All of these have been in linux-next with no reported issues"
* tag 'tty-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (90 commits)
MAINTAINERS: enlist Greg formally for console stuff
vgacon: Fix for missing check in scrollback handling
Revert "serial: 8250: Let serial core initialise spin lock"
serial: 8250: Let serial core initialise spin lock
tty: keyboard, do not speculate on func_table index
serial: stm32: Add RS485 RTS GPIO control
serial: 8250_dw: Fix common clocks usage race condition
serial: 8250_dw: Pass the same rate to the clk round and set rate methods
serial: 8250_dw: Simplify the ref clock rate setting procedure
serial: 8250: Add 8250 port clock update method
tty: serial: imx: add imx earlycon driver
tty: serial: imx: enable imx serial console port as module
tty/synclink: remove leftover bits of non-PCI card support
tty: Use the preferred form for passing the size of a structure type
tty: Fix identation issues in struct serial_struct32
tty: Avoid the use of one-element arrays
serial: msm_serial: add sparse context annotation
serial: pmac_zilog: add sparse context annotation
newport_con: vc_color is now in state
serial: imx: use hrtimers for rs485 delays
...
Rename the bit to match latest virtio spec.
Add a compat macro to avoid breaking existing userspace.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Some Makefiles already pass -fno-stack-protector unconditionally.
For example, arch/arm64/kernel/vdso/Makefile, arch/x86/xen/Makefile.
No problem report so far about hard-coding this option. So, we can
assume all supported compilers know -fno-stack-protector.
GCC 4.8 and Clang support this option (https://godbolt.org/z/_HDGzN)
Get rid of cc-option from -fno-stack-protector.
Remove CONFIG_CC_HAS_STACKPROTECTOR_NONE, which is always 'y'.
Note:
arch/mips/vdso/Makefile adds -fno-stack-protector twice, first
unconditionally, and second conditionally. I removed the second one.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Now that HAVE_COPY_THREAD_TLS has been removed, rename copy_thread_tls()
back simply copy_thread(). It's a simpler name, and doesn't imply that only
tls is copied here. This finishes an outstanding chunk of internal process
creation work since we've added clone3().
Cc: linux-arch@vger.kernel.org
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>A
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Greentime Hu <green.hu@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>A
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
All architectures support copy_thread_tls() now, so remove the legacy
copy_thread() function and the HAVE_COPY_THREAD_TLS config option. Everyone
uses the same process creation calling convention based on
copy_thread_tls() and struct kernel_clone_args. This will make it easier to
maintain the core process creation code under kernel/, simplifies the
callpaths and makes the identical for all architectures.
Cc: linux-arch@vger.kernel.org
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Greentime Hu <green.hu@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
um's put_char only calls write. And the tty layer/disciplines do the
same if put_char is NULL.
So we can safely remove this put_char wrapper.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Link: https://lore.kernel.org/r/20200615074856.18949-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Use fdatasync() in ubd
- Add a generic "fd" vector transport
- Minor cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=eKrj
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- Use fdatasync() in ubd
- Add a generic "fd" vector transport
- Minor cleanups and fixes
* tag 'for-linus-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: virtio: Replace zero-length array with flexible-array
um: Use fdatasync() when mapping the UBD FSYNC command
um: Do not evaluate compiler's library path when cleaning
um: Neaten vu_err macro definition
um: Add a generic "fd" vector transport
um: Add include: memset() and memcpy() are in <string.h>
Except for historical confusion in the kprobes/uprobes and bpf tracers,
which has been fixed now, there is no good reason to ever allow user
memory accesses from probe_kernel_read. Switch probe_kernel_read to only
read from kernel memory.
[akpm@linux-foundation.org: update it for "mm, dump_page(): do not crash with invalid mapping pointer"]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200521152301.2587579-17-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently architectures have to override every routine that probes
kernel memory, which includes a pure read and strcpy, both in strict
and not strict variants. Just provide a single arch hooks instead to
make sure all architectures cover all the cases.
[akpm@linux-foundation.org: fix !CONFIG_X86_64 build]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200521152301.2587579-11-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All architectures define pte_index() as
(address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)
and all architectures define pte_offset_kernel() as an entry in the array
of PTEs indexed by the pte_index().
For the most architectures the pte_offset_kernel() implementation relies
on the availability of pmd_page_vaddr() that converts a PMD entry value to
the virtual address of the page containing PTEs array.
Let's move x86 definitions of the PTE accessors to the generic place in
<linux/pgtable.h> and then simply drop the respective definitions from the
other architectures.
The architectures that didn't provide pmd_page_vaddr() are updated to have
that defined.
The generic implementation of pte_offset_kernel() can be overridden by an
architecture and alpha makes use of this because it has special ordering
requirements for its version of pte_offset_kernel().
[rppt@linux.ibm.com: v2]
Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org
[rppt@linux.ibm.com: update]
Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org
[rppt@linux.ibm.com: update]
Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org
[akpm@linux-foundation.org: fix x86 warning]
[sfr@canb.auug.org.au: fix powerpc build]
Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The powerpc 32-bit implementation of pgtable has nice shortcuts for
accessing kernel PMD and PTE for a given virtual address. Make these
helpers available for all architectures.
[rppt@linux.ibm.com: microblaze: fix page table traversal in setup_rt_frame()]
Link: http://lkml.kernel.org/r/20200518191511.GD1118872@kernel.org
[akpm@linux-foundation.org: s/pmd_ptr_k/pmd_off_k/ in various powerpc places]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-9-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.
Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: consolidate definitions of page table accessors", v2.
The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once. For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.
Most of these definitions are actually identical and typically it boils
down to, e.g.
static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}
These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.
For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.
These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.
This patch (of 12):
The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g. pte_alloc() and
pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.
The include statements in such cases are remove with a simple loop:
for f in $(git grep -l "include <linux/mm.h>") ; do
sed -i -e '/include <asm\/pgtable.h>/ d' $f
done
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now the last users of show_stack() got converted to use an explicit log
level, show_stack_loglvl() can drop it's redundant suffix and become once
again well known show_stack().
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200418201944.482088-51-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Link: http://lkml.kernel.org/r/20200418201944.482088-37-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
`sp' is a needless excercise here.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Link: http://lkml.kernel.org/r/20200418201944.482088-36-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This seems to lead to some crazy include loops when using
asm-generic/cacheflush.h on more architectures, so leave it to the arch
header for now.
[hch@lst.de: fix warning]
Link: http://lkml.kernel.org/r/20200520173520.GA11199@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Will Deacon <will@kernel.org>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: http://lkml.kernel.org/r/20200515143646.3857579-7-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32
- ensure to rebuild all objects when the compiler is upgraded
- exclude system headers from dependency tracking and fixdep processing
- fix potential bit-size mismatch between the kernel and BPF user-mode
helper
- add the new syntax 'userprogs' to build user-space programs for the
target architecture (the same arch as the kernel)
- compile user-space sample code under samples/ for the target arch
instead of the host arch
- make headers_install fail if a CONFIG option is leaked to user-space
- sanitize the output format of scripts/checkstack.pl
- handle ARM 'push' instruction in scripts/checkstack.pl
- error out before modpost if a module name conflict is found
- error out when multiple directories are passed to M= because this
feature is broken for a long time
- add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info
- a lot of cleanups of modpost
- dump vmlinux symbols out into vmlinux.symvers, and reuse it in the
second pass of modpost
- do not run the second pass of modpost if nothing in modules is updated
- install modules.builtin(.modinfo) by 'make install' as well as by
'make modules_install' because it is useful even when CONFIG_MODULES=n
- add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ
to allow users to use alternatives such as pigz, pbzip2, etc.
-----BEGIN PGP SIGNATURE-----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=GKe5
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32
- ensure to rebuild all objects when the compiler is upgraded
- exclude system headers from dependency tracking and fixdep processing
- fix potential bit-size mismatch between the kernel and BPF user-mode
helper
- add the new syntax 'userprogs' to build user-space programs for the
target architecture (the same arch as the kernel)
- compile user-space sample code under samples/ for the target arch
instead of the host arch
- make headers_install fail if a CONFIG option is leaked to user-space
- sanitize the output format of scripts/checkstack.pl
- handle ARM 'push' instruction in scripts/checkstack.pl
- error out before modpost if a module name conflict is found
- error out when multiple directories are passed to M= because this
feature is broken for a long time
- add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info
- a lot of cleanups of modpost
- dump vmlinux symbols out into vmlinux.symvers, and reuse it in the
second pass of modpost
- do not run the second pass of modpost if nothing in modules is
updated
- install modules.builtin(.modinfo) by 'make install' as well as by
'make modules_install' because it is useful even when
CONFIG_MODULES=n
- add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ
to allow users to use alternatives such as pigz, pbzip2, etc.
* tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits)
kbuild: add variables for compression tools
Makefile: install modules.builtin even if CONFIG_MODULES=n
mksysmap: Fix the mismatch of '.L' symbols in System.map
kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS
modpost: change elf_info->size to size_t
modpost: remove is_vmlinux() helper
modpost: strip .o from modname before calling new_module()
modpost: set have_vmlinux in new_module()
modpost: remove mod->skip struct member
modpost: add mod->is_vmlinux struct member
modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}()
modpost: remove mod->is_dot_o struct member
modpost: move -d option in scripts/Makefile.modpost
modpost: remove -s option
modpost: remove get_next_text() and make {grab,release_}file static
modpost: use read_text_file() and get_line() for reading text files
modpost: avoid false-positive file open error
modpost: fix potential mmap'ed file overrun in get_src_version()
modpost: add read_text_file() and get_line() helpers
modpost: do not call get_modinfo() for vmlinux(.o)
...
Pull livepatching updates from Jiri Kosina:
- simplifications and improvements for issues Peter Ziljstra found
during his previous work on W^X cleanups.
This allows us to remove livepatch arch-specific .klp.arch sections
and add proper support for jump labels in patched code.
Also, this patchset removes the last module_disable_ro() usage in the
tree.
Patches from Josh Poimboeuf and Peter Zijlstra
- a few other minor cleanups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
MAINTAINERS: add lib/livepatch to LIVE PATCHING
livepatch: add arch-specific headers to MAINTAINERS
livepatch: Make klp_apply_object_relocs static
MAINTAINERS: adjust to livepatch .klp.arch removal
module: Make module_enable_ro() static again
x86/module: Use text_mutex in apply_relocate_add()
module: Remove module_disable_ro()
livepatch: Remove module_disable_ro() usage
x86/module: Use text_poke() for late relocations
s390/module: Use s390_kernel_write() for late relocations
s390: Change s390_kernel_write() return type to match memcpy()
livepatch: Prevent module-specific KLP rela sections from referencing vmlinux symbols
livepatch: Remove .klp.arch
livepatch: Apply vmlinux-specific KLP relocations early
livepatch: Disallow vmlinux.ko
Currently, architectures that use free_area_init() to initialize memory
map and node and zone structures need to calculate zone and hole sizes.
We can use free_area_init_nodes() instead and let it detect the zone
boundaries while the architectures will only have to supply the possible
limits for the zones.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64]
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200412194859.12663-5-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
We do not need to update the metadata (atime, mtime, etc)
on the UBD file and/or the COW file until UML exits.
UBD image mtime is checked in UML only when opening
the files. After that they are locked and used
exclusively by a single UML instance, so there is
no point wasting resources on updating metadata on
every sync. We can sync data only. The host will
always update mtime if a file has been modified upon
closing it.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Since commit a83e4ca26a ("kbuild: remove cc-option switch from
-Wframe-larger-than="), 'make ARCH=um clean' emits an error message
as follows:
$ make ARCH=um clean
gcc: error: missing argument to '-Wframe-larger-than='
We do not care compiler flags when cleaning.
Use the '=' operator for lazy expansion because we do not use
LDFLAGS_pcap.o or LDFLAGS_vde.o when cleaning.
While I was here, I removed the redundant -r option because it
already exists in the recipe.
Fixes: a83e4ca26a ("kbuild: remove cc-option switch from -Wframe-larger-than=")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> [build]
Signed-off-by: Richard Weinberger <richard@nod.at>
Defining a macro with ... and __VA_ARGS__ (without ##) can cause
compilation errors if a macro use does not have additional args.
Add ## to __VA_ARGS__ in the macro definition.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Learn to take a pre-opened file-descriptor for vector IO.
Instead of teaching the driver to open a FD in multiple ways, it can
rely on management layer to do it on its behalf. For example, this
allows inheriting a preconfigured device fd or a simple socketpair()
setup, without further arguments, privileges or system access by UML.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
These two functions are otherwise unknown to the pedantic compiler.
Include the correct header to enable the build to succeed.
Signed-off-by: Zach van Rijn <me@zv.io>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Merge {CLEAN,MRPROPER,DISTCLEAN}_DIRS into {CLEAN,MRPROPER,DISTCLEAN}_FILES
because the difference is just the -r option passed to the 'rm' command.
Do likewise as commit 1634f2bfdb ("kbuild: remove clean-dirs syntax").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit a83e4ca26a ("kbuild: remove cc-option switch from
-Wframe-larger-than="), 'make ARCH=um clean' emits an error message
as follows:
$ make ARCH=um clean
gcc: error: missing argument to '-Wframe-larger-than='
We do not care compiler flags when cleaning.
Use the '=' operator for lazy expansion because we do not use
LDFLAGS_pcap.o or LDFLAGS_vde.o when cleaning.
While I was here, I removed the redundant -r option because it
already exists in the recipe.
Fixes: a83e4ca26a ("kbuild: remove cc-option switch from -Wframe-larger-than=")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> [build]
Because of late module patching, a livepatch module needs to be able to
apply some of its relocations well after it has been loaded. Instead of
playing games with module_{dis,en}able_ro(), use existing text poking
mechanisms to apply relocations after module loading.
So far only x86, s390 and Power have HAVE_LIVEPATCH but only the first
two also have STRICT_MODULE_RWX.
This will allow removal of the last module_disable_ro() usage in
livepatch. The ultimate goal is to completely disallow making
executable mappings writable.
[ jpoimboe: Split up patches. Use mod state to determine whether
memcpy() can be used. Implement text_poke() for UML. ]
Cc: x86@kernel.org
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
No big problem as "raw" and "gre" have the same length, but could go wrong if
they don't in the future.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Without CONFIG_SECCOMP, we don't get this include recursively
through the existing includes, thus failing the build on not
having __NR_syscall_max defined. Add the necessary include to
fix this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Two independent changes here ended up going into the tree
one after another, without a necessary rename, fix that.
Reported-by: Thomas Meyer <thomas@m3y3r.de>
Fixes: f185063bff ("um: Move timer-internal.h to non-shared")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Currently there are many platforms that dont enable ARCH_HAS_PTE_SPECIAL
but required to define quite similar fallback stubs for special page
table entry helpers such as pte_special() and pte_mkspecial(), as they
get build in generic MM without a config check. This creates two
generic fallback stub definitions for these helpers, eliminating much
code duplication.
mips platform has a special case where pte_special() and pte_mkspecial()
visibility is wider than what ARCH_HAS_PTE_SPECIAL enablement requires.
This restricts those symbol visibility in order to avoid redefinitions
which is now exposed through this new generic stubs and subsequent build
failure. arm platform set_pte_at() definition needs to be moved into a
C file just to prevent a build failure.
[anshuman.khandual@arm.com: use defined(CONFIG_ARCH_HAS_PTE_SPECIAL) in mips per Thomas]
Link: http://lkml.kernel.org/r/1583851924-21603-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Guo Ren <guoren@kernel.org> [csky]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Stafford Horne <shorne@gmail.com> [openrisc]
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Sam Creasey <sammy@sammy.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: http://lkml.kernel.org/r/1583802551-15406-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- New mode for time travel, external via virtio
- Fixes for ubd to make sure no requests can get lost
- Fixes for vector networking
- Allow CONFIG_STATIC_LINK only when possible
- Minor cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=WVcL
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- New mode for time travel, external via virtio
- Fixes for ubd to make sure no requests can get lost
- Fixes for vector networking
- Allow CONFIG_STATIC_LINK only when possible
- Minor cleanups and fixes
* tag 'for-linus-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Remove some unnecessary NULL checks in vector_user.c
um: vector: Avoid NULL ptr deference if transport is unset
um: Make CONFIG_STATIC_LINK actually static
um: Implement cpu_relax() as ndelay(1) for time-travel
um: Implement ndelay/udelay in time-travel mode
um: Implement time-travel=ext
um: virtio: Implement VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS
um: time-travel: Rewrite as an event scheduler
um: Move timer-internal.h to non-shared
hostfs: Use kasprintf() instead of fixed buffer formatting
um: falloc.h needs to be directly included for older libc
um: ubd: Retry buffer read on any kind of error
um: ubd: Prevent buffer overrun on command completion
um: Fix overlapping ELF segments when statically linked
um: Delete never executed timer
um: Don't overwrite ethtool driver version
um: Fix len of file in create_pid_file
um: Don't use console_drivers directly
um: Cleanup CONFIG_IOSCHED_CFQ
Here is the big set of char/misc/other driver patches for 5.7-rc1.
Lots of things in here, and it's later than expected due to some reverts
to resolve some reported issues. All is now clean with no reported
problems in linux-next.
Included in here is:
- interconnect updates
- mei driver updates
- uio updates
- nvmem driver updates
- soundwire updates
- binderfs updates
- coresight updates
- habanalabs updates
- mhi new bus type and core
- extcon driver updates
- some Kconfig cleanups
- other small misc driver cleanups and updates
As mentioned, all have been in linux-next for a while, and with the last
two reverts, all is calm and good.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodfvA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynzCQCfROhar3E8EhYEqSOP6xq6uhX9uegAnRgGY2rs
rN4JJpOcTddvZcVlD+vo
=ocWk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc/other driver patches for 5.7-rc1.
Lots of things in here, and it's later than expected due to some
reverts to resolve some reported issues. All is now clean with no
reported problems in linux-next.
Included in here is:
- interconnect updates
- mei driver updates
- uio updates
- nvmem driver updates
- soundwire updates
- binderfs updates
- coresight updates
- habanalabs updates
- mhi new bus type and core
- extcon driver updates
- some Kconfig cleanups
- other small misc driver cleanups and updates
As mentioned, all have been in linux-next for a while, and with the
last two reverts, all is calm and good"
* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
Revert "driver core: platform: Initialize dma_parms for platform devices"
Revert "amba: Initialize dma_parms for amba devices"
amba: Initialize dma_parms for amba devices
driver core: platform: Initialize dma_parms for platform devices
bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
bus: mhi: core: Add support for reading MHI info from device
misc: rtsx: set correct pcr_ops for rts522A
speakup: misc: Use dynamic minor numbers for speakup devices
mei: me: add cedar fork device ids
coresight: do not use the BIT() macro in the UAPI header
Documentation: provide IBM contacts for embargoed hardware
nvmem: core: remove nvmem_sysfs_get_groups()
nvmem: core: use is_bin_visible for permissions
nvmem: core: use device_register and device_unregister
nvmem: core: add root_only member to nvmem device struct
extcon: axp288: Add wakeup support
extcon: Mark extcon_get_edev_name() function as exported symbol
extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
...
Here are 3 SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your current
tree, that should be trivial to handle (one file modified by two things,
one file deleted.)
All 3 of these have been in linux-next for a while, with no reported
issues other than the merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm
m5AuCzO3Azt9KBi7NL+L
=2Lm5
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
Merge updates from Andrew Morton:
"A large amount of MM, plenty more to come.
Subsystems affected by this patch series:
- tools
- kthread
- kbuild
- scripts
- ocfs2
- vfs
- mm: slub, kmemleak, pagecache, gup, swap, memcg, pagemap, mremap,
sparsemem, kasan, pagealloc, vmscan, compaction, mempolicy,
hugetlbfs, hugetlb"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (155 commits)
include/linux/huge_mm.h: check PageTail in hpage_nr_pages even when !THP
mm/hugetlb: fix build failure with HUGETLB_PAGE but not HUGEBTLBFS
selftests/vm: fix map_hugetlb length used for testing read and write
mm/hugetlb: remove unnecessary memory fetch in PageHeadHuge()
mm/hugetlb.c: clean code by removing unnecessary initialization
hugetlb_cgroup: add hugetlb_cgroup reservation docs
hugetlb_cgroup: add hugetlb_cgroup reservation tests
hugetlb: support file_region coalescing again
hugetlb_cgroup: support noreserve mappings
hugetlb_cgroup: add accounting for shared mappings
hugetlb: disable region_add file_region coalescing
hugetlb_cgroup: add reservation accounting for private mappings
mm/hugetlb_cgroup: fix hugetlb_cgroup migration
hugetlb_cgroup: add interface for charge/uncharge hugetlb reservations
hugetlb_cgroup: add hugetlb_cgroup reservation counter
hugetlbfs: Use i_mmap_rwsem to address page fault/truncate race
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
mm/memblock.c: remove redundant assignment to variable max_addr
mm: mempolicy: require at least one nodeid for MPOL_PREFERRED
mm: mempolicy: use VM_BUG_ON_VMA in queue_pages_test_walk()
...
Pull exec/proc updates from Eric Biederman:
"This contains two significant pieces of work: the work to sort out
proc_flush_task, and the work to solve a deadlock between strace and
exec.
Fixing proc_flush_task so that it no longer requires a persistent
mount makes improvements to proc possible. The removal of the
persistent mount solves an old regression that that caused the hidepid
mount option to only work on remount not on mount. The regression was
found and reported by the Android folks. This further allows Alexey
Gladkov's work making proc mount options specific to an individual
mount of proc to move forward.
The work on exec starts solving a long standing issue with exec that
it takes mutexes of blocking userspace applications, which makes exec
extremely deadlock prone. For the moment this adds a second mutex with
a narrower scope that handles all of the easy cases. Which makes the
tricky cases easy to spot. With a little luck the code to solve those
deadlocks will be ready by next merge window"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (25 commits)
signal: Extend exec_id to 64bits
pidfd: Use new infrastructure to fix deadlocks in execve
perf: Use new infrastructure to fix deadlocks in execve
proc: io_accounting: Use new infrastructure to fix deadlocks in execve
proc: Use new infrastructure to fix deadlocks in execve
kernel/kcmp.c: Use new infrastructure to fix deadlocks in execve
kernel: doc: remove outdated comment cred.c
mm: docs: Fix a comment in process_vm_rw_core
selftests/ptrace: add test cases for dead-locks
exec: Fix a deadlock in strace
exec: Add exec_update_mutex to replace cred_guard_mutex
exec: Move exec_mmap right after de_thread in flush_old_exec
exec: Move cleanup of posix timers on exec out of de_thread
exec: Factor unshare_sighand out of de_thread and call it separately
exec: Only compute current once in flush_old_exec
pid: Improve the comment about waiting in zap_pid_ns_processes
proc: Remove the now unnecessary internal mount of proc
uml: Create a private mount of proc for mconsole
uml: Don't consult current to find the proc_mnt in mconsole_proc
proc: Use a list of inodes to flush from proc
...
The idea comes from a discussion between Linus and Andrea [1].
Before this patch we only allow a page fault to retry once. We achieved
this by clearing the FAULT_FLAG_ALLOW_RETRY flag when doing
handle_mm_fault() the second time. This was majorly used to avoid
unexpected starvation of the system by looping over forever to handle the
page fault on a single page. However that should hardly happen, and after
all for each code path to return a VM_FAULT_RETRY we'll first wait for a
condition (during which time we should possibly yield the cpu) to happen
before VM_FAULT_RETRY is really returned.
This patch removes the restriction by keeping the FAULT_FLAG_ALLOW_RETRY
flag when we receive VM_FAULT_RETRY. It means that the page fault handler
now can retry the page fault for multiple times if necessary without the
need to generate another page fault event. Meanwhile we still keep the
FAULT_FLAG_TRIED flag so page fault handler can still identify whether a
page fault is the first attempt or not.
Then we'll have these combinations of fault flags (only considering
ALLOW_RETRY flag and TRIED flag):
- ALLOW_RETRY and !TRIED: this means the page fault allows to
retry, and this is the first try
- ALLOW_RETRY and TRIED: this means the page fault allows to
retry, and this is not the first try
- !ALLOW_RETRY and !TRIED: this means the page fault does not allow
to retry at all
- !ALLOW_RETRY and TRIED: this is forbidden and should never be used
In existing code we have multiple places that has taken special care of
the first condition above by checking against (fault_flags &
FAULT_FLAG_ALLOW_RETRY). This patch introduces a simple helper to detect
the first retry of a page fault by checking against both (fault_flags &
FAULT_FLAG_ALLOW_RETRY) and !(fault_flag & FAULT_FLAG_TRIED) because now
even the 2nd try will have the ALLOW_RETRY set, then use that helper in
all existing special paths. One example is in __lock_page_or_retry(), now
we'll drop the mmap_sem only in the first attempt of page fault and we'll
keep it in follow up retries, so old locking behavior will be retained.
This will be a nice enhancement for current code [2] at the same time a
supporting material for the future userfaultfd-writeprotect work, since in
that work there will always be an explicit userfault writeprotect retry
for protected pages, and if that cannot resolve the page fault (e.g., when
userfaultfd-writeprotect is used in conjunction with swapped pages) then
we'll possibly need a 3rd retry of the page fault. It might also benefit
other potential users who will have similar requirement like userfault
write-protection.
GUP code is not touched yet and will be covered in follow up patch.
Please read the thread below for more information.
[1] https://lore.kernel.org/lkml/20171102193644.GB22686@redhat.com/
[2] https://lore.kernel.org/lkml/20181230154648.GB9832@redhat.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Brian Geffon <bgeffon@google.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Link: http://lkml.kernel.org/r/20200220160246.9790-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Although there're tons of arch-specific page fault handlers, most of them
are still sharing the same initial value of the page fault flags. Say,
merely all of the page fault handlers would allow the fault to be retried,
and they also allow the fault to respond to SIGKILL.
Let's define a default value for the fault flags to replace those initial
page fault flags that were copied over. With this, it'll be far easier to
introduce new fault flag that can be used by all the architectures instead
of touching all the archs.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Brian Geffon <bgeffon@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Link: http://lkml.kernel.org/r/20200220160238.9694-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kfree() already checks for null pointers, so additional checking is
unnecessary.
Signed-off-by: Alex Dewar <alex.dewar@gmx.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
When the transport option of a vec isn't set strncmp ends up being
called on a NULL pointer. Better not do that.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Currently, CONFIG_STATIC_LINK can be enabled with options which cannot
be statically linked, namely UML_NET_VECTOR, UML_NET_VDE, and
UML_NET_PCAP; this is because glibc tries to load NSS which does not
support being statically linked. So make CONFIG_STATIC_LINK depend on
!UML_NET_VECTOR && !UML_NET_VDE && !UML_NET_PCAP.
Link: https://lore.kernel.org/lkml/f658f317-be54-ed75-8296-c373c2dcc697@cambridgegreys.com/#t
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
In external or inf-cpu time-travel mode, ndelay/udelay currently
just waste CPU time since the simulation time doesn't advance.
Implement them properly in this case.
Note that the "if (time_travel_mode == ...)" parts compile out
if CONFIG_UML_TIME_TRAVEL_SUPPORT isn't set, time_travel_mode is
defined to TT_MODE_OFF in that case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This implements synchronized time-travel mode which - using a special
application on a unix socket - lets multiple machines take part in a
time-travelling simulation together.
The protocol for the unix domain socket is defined in the new file
include/uapi/linux/um_timetravel.h.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Implement in-band notifications that are necessary for running
vhost-user devices under externally synchronized time-travel
mode (which is in a follow-up patch). This feature makes what
usually should be eventfd notifications in-band messages.
We'll prefer this feature, under the assumption that only a
few (simulation) devices will ever support it, since it's not
very efficient.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Instead of tracking all the various timer configurations,
modify the time-travel mode to have an event scheduler and
use a timer event on the scheduler to handle the different
timer configurations.
This doesn't change the function right now, but it prepares
the code for having different kinds of events in the future
(i.e. interrupts coming from other devices that are part of
co-simulation.)
While at it, also move time_travel_sleep() to time.c to
reduce the externally visible API surface.
Also, we really should mark time-travel as incompatible with
SMP, even if UML doesn't support SMP yet.
Finally, I noticed a bug while developing this - if we move
time forward due to consuming time while reading the clock,
we might move across the next event and that would cause us
to go backward in time when we then handle that event. Fix
that by invoking the whole event machine in this case, but
in order to simplify this, make reading the clock only cost
something when interrupts are not disabled. Otherwise, we'd
have to hook into the interrupt delivery machinery etc. and
that's somewhat intrusive.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This file isn't really shared, it's only used on the kernel side,
not on the user side. Remove the include from the user-side and
move the file to a better place.
While at it, rename it to time-internal.h, it's not really just
timers but all kinds of things related to timekeeping.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
When building UML with glibc 2.17 installed, compilation
of arch/um/os-Linux/file.c fails due to failure to find
FALLOC_FL_PUNCH_HOLE and FALLOC_FL_KEEP_SIZE definitions.
It appears that /usr/include/bits/fcntl-linux.h (indirectly
included by /usr/include/fcntl.h) does not include falloc.h
with an older glibc, whereas a more up-to-date version
does.
Adding the direct include to file.c resolves the issue
and does not cause problems for more recent glibc.
Fixes: 50109b5a03 ("um: Add support for DISCARD in the UBD Driver")
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Should bulk_req_safe_read return an error, we want to retry the read,
otherwise, even though no IO will be done, os_write_file might still end
up writing garbage to the pipe.
Cc: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
On the hypervisor side, when completing commands and the pipe is full,
we retry writing only the entries that failed, by offsetting
io_req_buffer, but we don't reduce the number of bytes written, which
can cause a buffer overrun of io_req_buffer, and write garbage to the
pipe.
Cc: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
When statically linked, the .text section in UML kernels is not page
aligned, causing it to share a page with the executable headers. As
.text and the executable headers have different permissions, this causes
the kernel to wish to map the same page twice (once as headers with r--
permissions, once as .text with r-x permissions), causing a segfault,
and a nasty message printed to the host kernel's dmesg:
"Uhuuh, elf segment at 0000000060000000 requested but the memory is
mapped already"
By aligning the .text to a page boundary (as in the dynamically linked
version in dyn.lds.S), there is no such overlap, and the kernel runs
correctly.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The "#ifdef undef" construction effectively disabled the timer.
It causes to the fact that this timer did nothing, so delete it.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
In-tree drivers don't need to manage internal version because
they are aligned to the global Linux kernel version, which is
reported by default with "ethtool -i".
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
sizeof gives us the size of the pointer variable, not of the
area it points to. So the number of bytes copied by umid_file_name()
is 8.
We should pass in the correct length of the file buffer.
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
console_drivers is kind of (semi-)private variable to the console code.
Direct use of it make us stuck with it being exported here and there.
Reduce use of console_drivers by replacing it with for_each_console().
Cc: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
CONFIG_IOSCHED_CFQ is gone since commit f382fb0bce ("block: remove legacy
IO schedulers").
The IOSCHED_BFQ seems to replace IOSCHED_CFQ so select it in configs
previously choosing the latter.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
HWRNG_MINOR and RNG_MISCDEV_MINOR are duplicate definitions, use
unified HWRNG_MINOR instead and moved into miscdevice.h
ANSLCD_MINOR and LCD_MINOR are duplicate definitions, use unified
LCD_MINOR instead and moved into miscdevice.h
MISCDEV_MINOR is renamed to PXA3XX_GCU_MINOR and moved into
miscdevice.h
Other definitions are just moved without any change.
Link: https://lore.kernel.org/lkml/20200120221323.GJ15860@mit.edu/t/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Build-tested-by: Willy TARREAU <wtarreau@haproxy.com>
Build-tested-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20200311071654.335-2-zhenzhong.duan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mconsole code only ever accesses proc for the initial pid
namespace. Instead of depending upon the proc_mnt which is
for proc_flush_task have uml create it's own mount of proc
instead.
This allows proc_flush_task to evolve and remove the
need for having a proc_mnt to do it's job.
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Inspection of the control flow reveals that mconsole_proc is either
called from mconsole_stop called from mc_work_proc or from
mc_work_proc directly. The function mc_work_proc is dispatched to a
kernel thread with schedule_work.
All of the threads that run dispatched by schedule_work are in the
init pid namespace.
So make the code clearer and by using init_pid_ns instead of
task_active_pid_ns(current).
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Unfortunately, GCC 9.1 is expected to be be released without support for
MPX. This means that there was only a relatively small window where
folks could have ever used MPX. It failed to gain wide adoption in the
industry, and Linux was the only mainstream OS to ever support it widely.
Support for the feature may also disappear on future processors.
This set completes the process that we started during the 5.4 merge window.
-----BEGIN PGP SIGNATURE-----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=g4cC
-----END PGP SIGNATURE-----
Merge tag 'mpx-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/daveh/x86-mpx
Pull x86 MPX removal from Dave Hansen:
"MPX requires recompiling applications, which requires compiler
support. Unfortunately, GCC 9.1 is expected to be be released without
support for MPX. This means that there was only a relatively small
window where folks could have ever used MPX. It failed to gain wide
adoption in the industry, and Linux was the only mainstream OS to ever
support it widely.
Support for the feature may also disappear on future processors.
This set completes the process that we started during the 5.4 merge
window when the MPX prctl()s were removed. XSAVE support is left in
place, which allows MPX-using KVM guests to continue to function"
* tag 'mpx-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/daveh/x86-mpx:
x86/mpx: remove MPX from arch/x86
mm: remove arch_bprm_mm_init() hook
x86/mpx: remove bounds exception code
x86/mpx: remove build infrastructure
x86/alternatives: add missing insn.h include
This series is slightly unusual because it includes Arnd's compat
ioctl tree here:
1c46a2cf2d Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue
Excluding Arnd's changes, this is mostly an update of the usual
drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas. There
are a couple of core and base updates around error propagation and
atomicity in the attribute container base we use for the SCSI
transport classes. The rest is minor changes and updates.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXjHQJyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZZ8AQC02N+v
iUnTl1YxGPjIWBbnHuUxN2Qbb9D3C6gAT1LkigEArlk163K3A1XEQHF/VNCdAz/f
01XYTd3p1VHuegIBHlk=
=Cn52
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series is slightly unusual because it includes Arnd's compat
ioctl tree here:
1c46a2cf2d Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue
Excluding Arnd's changes, this is mostly an update of the usual
drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas.
There are a couple of core and base updates around error propagation
and atomicity in the attribute container base we use for the SCSI
transport classes.
The rest is minor changes and updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (149 commits)
scsi: hisi_sas: Rename hisi_sas_cq.pci_irq_mask
scsi: hisi_sas: Add prints for v3 hw interrupt converge and automatic affinity
scsi: hisi_sas: Modify the file permissions of trigger_dump to write only
scsi: hisi_sas: Replace magic number when handle channel interrupt
scsi: hisi_sas: replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock
scsi: hisi_sas: use threaded irq to process CQ interrupts
scsi: ufs: Use UFS device indicated maximum LU number
scsi: ufs: Add max_lu_supported in struct ufs_dev_info
scsi: ufs: Delete is_init_prefetch from struct ufs_hba
scsi: ufs: Inline two functions into their callers
scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufshcd_device_params_init()
scsi: ufs: Split ufshcd_probe_hba() based on its called flow
scsi: ufs: Delete struct ufs_dev_desc
scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails
scsi: ufs-mediatek: enable low-power mode for hibern8 state
scsi: ufs: export some functions for vendor usage
scsi: ufs-mediatek: add dbg_register_dump implementation
scsi: qla2xxx: Fix a NULL pointer dereference in an error path
scsi: qla1280: Make checking for 64bit support consistent
scsi: megaraid_sas: Update driver version to 07.713.01.00-rc1
...
These are updates to device drivers and file systems that for some reason
or another were not included in the kernel in the previous y2038 series.
I've gone through all users of time_t again to make sure the kernel is
in a long-term maintainable state, replacing all remaining references
to time_t with safe alternatives.
Some related parts of the series were picked up into the nfsd, xfs,
alsa and v4l2 trees. A final set of patches in linux-mm removes the now
unused time_t/timeval/timespec types and helper functions after all five
branches are merged for linux-5.6, ensuring that no new users get merged.
As a result, linux-5.6, or my backport of the patches to 5.4 [1], should
be the first release that can serve as a base for a 32-bit system designed
to run beyond year 2038, with a few remaining caveats:
- All user space must be compiled with a 64-bit time_t, which will be
supported in the coming musl-1.2 and glibc-2.32 releases, along with
installed kernel headers from linux-5.6 or higher.
- Applications that use the system call interfaces directly need to be
ported to use the time64 syscalls added in linux-5.1 in place of the
existing system calls. This impacts most users of futex() and seccomp()
as well as programming languages that have their own runtime environment
not based on libc.
- Applications that use a private copy of kernel uapi header files or
their contents may need to update to the linux-5.6 version, in
particular for sound/asound.h, xfs/xfs_fs.h, linux/input.h,
linux/elfcore.h, linux/sockios.h, linux/timex.h and linux/can/bcm.h.
- A few remaining interfaces cannot be changed to pass a 64-bit time_t
in a compatible way, so they must be configured to use CLOCK_MONOTONIC
times or (with a y2106 problem) unsigned 32-bit timestamps. Most
importantly this impacts all users of 'struct input_event'.
- All y2038 problems that are present on 64-bit machines also apply to
32-bit machines. In particular this affects file systems with on-disk
timestamps using signed 32-bit seconds: ext4 with ext3-style small
inodes, ext2, xfs (to be fixed soon) and ufs.
Changes since v1 [2]:
- Add Acks I received
- Rebase to v5.5-rc1, dropping patches that got merged already
- Add NFS, XFS and the final three patches from another series
- Rewrite etnaviv patches
- Add one late revert to avoid an etnaviv regression
[1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git/log/?h=y2038-endgame
[2] https://lore.kernel.org/lkml/20191108213257.3097633-1-arnd@arndb.de/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=wx0A
-----END PGP SIGNATURE-----
Merge tag 'y2038-drivers-for-v5.6-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull y2038 updates from Arnd Bergmann:
"Core, driver and file system changes
These are updates to device drivers and file systems that for some
reason or another were not included in the kernel in the previous
y2038 series.
I've gone through all users of time_t again to make sure the kernel is
in a long-term maintainable state, replacing all remaining references
to time_t with safe alternatives.
Some related parts of the series were picked up into the nfsd, xfs,
alsa and v4l2 trees. A final set of patches in linux-mm removes the
now unused time_t/timeval/timespec types and helper functions after
all five branches are merged for linux-5.6, ensuring that no new users
get merged.
As a result, linux-5.6, or my backport of the patches to 5.4 [1],
should be the first release that can serve as a base for a 32-bit
system designed to run beyond year 2038, with a few remaining caveats:
- All user space must be compiled with a 64-bit time_t, which will be
supported in the coming musl-1.2 and glibc-2.32 releases, along
with installed kernel headers from linux-5.6 or higher.
- Applications that use the system call interfaces directly need to
be ported to use the time64 syscalls added in linux-5.1 in place of
the existing system calls. This impacts most users of futex() and
seccomp() as well as programming languages that have their own
runtime environment not based on libc.
- Applications that use a private copy of kernel uapi header files or
their contents may need to update to the linux-5.6 version, in
particular for sound/asound.h, xfs/xfs_fs.h, linux/input.h,
linux/elfcore.h, linux/sockios.h, linux/timex.h and
linux/can/bcm.h.
- A few remaining interfaces cannot be changed to pass a 64-bit
time_t in a compatible way, so they must be configured to use
CLOCK_MONOTONIC times or (with a y2106 problem) unsigned 32-bit
timestamps. Most importantly this impacts all users of 'struct
input_event'.
- All y2038 problems that are present on 64-bit machines also apply
to 32-bit machines. In particular this affects file systems with
on-disk timestamps using signed 32-bit seconds: ext4 with
ext3-style small inodes, ext2, xfs (to be fixed soon) and ufs"
[1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git/log/?h=y2038-endgame
* tag 'y2038-drivers-for-v5.6-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (21 commits)
Revert "drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC"
y2038: sh: remove timeval/timespec usage from headers
y2038: sparc: remove use of struct timex
y2038: rename itimerval to __kernel_old_itimerval
y2038: remove obsolete jiffies conversion functions
nfs: fscache: use timespec64 in inode auxdata
nfs: fix timstamp debug prints
nfs: use time64_t internally
sunrpc: convert to time64_t for expiry
drm/etnaviv: avoid deprecated timespec
drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC
drm/msm: avoid using 'timespec'
hfs/hfsplus: use 64-bit inode timestamps
hostfs: pass 64-bit timestamps to/from user space
packet: clarify timestamp overflow
tsacct: add 64-bit btime field
acct: stop using get_seconds()
um: ubd: use 64-bit time_t where possible
xtensa: ISS: avoid struct timeval
dlm: use SO_SNDTIMEO_NEW instead of SO_SNDTIMEO_OLD
...
- Fix for time travel mode
- Disable CONFIG_CONSTRUCTORS again
- A new command line option to have an non-raw serial line
- Preparations to remove obsolete UML network drivers
-----BEGIN PGP SIGNATURE-----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=yi/o
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Anton Ivanov:
"I am sending this on behalf of Richard who is traveling.
This contains the following changes for UML:
- Fix for time travel mode
- Disable CONFIG_CONSTRUCTORS again
- A new command line option to have an non-raw serial line
- Preparations to remove obsolete UML network drivers"
* tag 'for-linus-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Fix time-travel=inf-cpu with xor/raid6
Revert "um: Enable CONFIG_CONSTRUCTORS"
um: Mark non-vector net transports as obsolete
um: Add an option to make serial driver non-raw
Pull networking updates from David Miller:
1) Add WireGuard
2) Add HE and TWT support to ath11k driver, from John Crispin.
3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.
4) Add variable window congestion control to TIPC, from Jon Maloy.
5) Add BCM84881 PHY driver, from Russell King.
6) Start adding netlink support for ethtool operations, from Michal
Kubecek.
7) Add XDP drop and TX action support to ena driver, from Sameeh
Jubran.
8) Add new ipv4 route notifications so that mlxsw driver does not have
to handle identical routes itself. From Ido Schimmel.
9) Add BPF dynamic program extensions, from Alexei Starovoitov.
10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.
11) Add support for macsec HW offloading, from Antoine Tenart.
12) Add initial support for MPTCP protocol, from Christoph Paasch,
Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.
13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
Cherian, and others.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
udp: segment looped gso packets correctly
netem: change mailing list
qed: FW 8.42.2.0 debug features
qed: rt init valid initialization changed
qed: Debug feature: ilt and mdump
qed: FW 8.42.2.0 Add fw overlay feature
qed: FW 8.42.2.0 HSI changes
qed: FW 8.42.2.0 iscsi/fcoe changes
qed: Add abstraction for different hsi values per chip
qed: FW 8.42.2.0 Additional ll2 type
qed: Use dmae to write to widebus registers in fw_funcs
qed: FW 8.42.2.0 Parser offsets modified
qed: FW 8.42.2.0 Queue Manager changes
qed: FW 8.42.2.0 Expose new registers and change windows
qed: FW 8.42.2.0 Internal ram offsets modifications
MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
Documentation: net: octeontx2: Add RVU HW and drivers overview
octeontx2-pf: ethtool RSS config support
octeontx2-pf: Add basic ethtool support
...
From: Dave Hansen <dave.hansen@linux.intel.com>
MPX is being removed from the kernel due to a lack of support
in the toolchain going forward (gcc).
arch_bprm_mm_init() is used at execve() time. The only non-stub
implementation is on x86 for MPX. Remove the hook entirely from
all architectures and generic code.
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: x86@kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Today, I erroneously built a time-travel configuration with btrfs
enabled, and noticed it cannot boot in time-travel=inf-cpu mode,
both xor and raid6 speed measurement gets stuck.
For xor, work around it by picking the first algorithm if inf-cpu
mode is enabled.
For raid6, I didn't find such a workaround, so disallow enabling
time-travel mode if RAID6_PQ_BENCHMARK is enabled.
With this, and RAID6_PQ_BENCHMARK disabled, I can boot a kernel
that has btrfs enabled in time-travel=inf-cpu mode.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This reverts commit 786b2384bf ("um: Enable CONFIG_CONSTRUCTORS").
There are two issues with this commit, uncovered by Anton in tests
on some (Debian) systems:
1) I completely forgot to call any constructors if CONFIG_CONSTRUCTORS
isn't set. Don't recall now if it just wasn't needed on my system, or
if I never tested this case.
2) With that fixed, it works - with CONFIG_CONSTRUCTORS *unset*. If I
set CONFIG_CONSTRUCTORS, it fails again, which isn't totally
unexpected since whatever wanted to run is likely to have to run
before the kernel init etc. that calls the constructors in this case.
Basically, some constructors that gcc emits (libc has?) need to run
very early during init; the failure mode otherwise was that the ptrace
fork test already failed:
----------------------
$ ./linux mem=512M
Core dump limits :
soft - 0
hard - NONE
Checking that ptrace can change system call numbers...check_ptrace : child exited with exitcode 6, while expecting 0; status 0x67f
Aborted
----------------------
Thinking more about this, it's clear that we simply cannot support
CONFIG_CONSTRUCTORS in UML. All the cases we need now (gcov, kasan)
involve not use of the __attribute__((constructor)), but instead
some constructor code/entry generated by gcc. Therefore, we cannot
distinguish between kernel constructors and system constructors.
Thus, revert this commit.
Cc: stable@vger.kernel.org [5.4+]
Fixes: 786b2384bf ("um: Enable CONFIG_CONSTRUCTORS")
Reported-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
UML_NET_VECTOR now supports filters compiled with pcap outside of UML;
it also supports: EoGRE, EoL2TPv3, RAW (+/- BPF), TAP and BESS.
While vector drivers are not 1:1 replacements for the existing drivers,
you can achieve the same topologies and the same connectivity at much
higher performance (2.5 to 9 Gbit on mid-range Ryzen desktop) - the old
drivers test out in the 500Mbit range on the same hardware.
For all these reasons, the non-vector based transports are now
unnecessary, and some, most notably pcap and vde are maintenance
burdens. Thus, it makes sense to at least start thinking about removing
the non-vector transports, so for now, mark them as obsolete.
Link: https://lore.kernel.org/lkml/15f048d3-07ab-61c1-c6e0-0712e626dd33@cambridgegreys.com/T/#u
Suggested-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
In some cases, for example when the program(s) running inside UML
isn't/aren't interactive (like the hwsim tests for wpa_supplicant)
there's really no value in having the serial lines configured to
be raw as they are now by default. Setting them to non-raw lets
one abort the whole UML with Ctrl-C, which is really the right
thing to do in these cases, basically the whole UML instance is
more like a single (testing) program.
Add a "ssl-non-raw" option to UML to support such a mode.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
These drivers implement the HDIO_GET_IDENTITY and CDROMVOLREAD ioctl
commands, which are compatible between 32-bit and 64-bit user space and
traditionally handled by compat_blkdev_driver_ioctl().
As a prerequisite to removing that function, make both drivers use
blkdev_compat_ptr_ioctl() as their .compat_ioctl callback.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The ubd code suffers from a possible y2038 overflow on 32-bit
architectures, both for the cow header and the os_file_modtime()
function.
Replace time_t with time64_t to extend the ubd_kern side as much
as possible.
Whether this makes a difference for the user side depends on
the host libc implementation that may use either 32-bit or 64-bit
time_t.
For the cow file format, the header contains an unsigned 32-bit
timestamp, which is good until y2106, passing this through a
'long long' gives us a consistent interpretation between 32-bit
and 64-bit um kernels.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In the x86 MM code we'd like to untangle various types of historic
header dependency spaghetti, but for this we'd need to pass to
the generic vmalloc code various vmalloc related defines that
customarily come via the <asm/page.h> low level arch header.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The UML port uses 4 and 5 level fixups to support higher level page
table directories in the generic VM code.
Implement primitives necessary for the 4th level folding, add walks of
p4d level where appropriate and drop usage of __ARCH_USE_5LEVEL_HACK.
Link: http://lkml.kernel.org/r/1572938135-31886-13-git-send-email-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Anatoly Pugachev <matorola@gmail.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Peter Rosin <peda@axentia.se>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Sam Creasey <sammy@sammy.net>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need support
for time64_t.
In completely unrelated work, I spent time on cleaning up parts of this
file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the rest
of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which is
the scsi ioctl handlers. I have patches for those as well, but they need
more testing or possibly a rewrite.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lgCl
-----END PGP SIGNATURE-----
Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
"As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need
support for time64_t.
In completely unrelated work, I spent time on cleaning up parts of
this file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the
rest of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which
is the scsi ioctl handlers. I have patches for those as well, but they
need more testing or possibly a rewrite"
* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
scsi: sd: enable compat ioctls for sed-opal
pktcdvd: add compat_ioctl handler
compat_ioctl: move SG_GET_REQUEST_TABLE handling
compat_ioctl: ppp: move simple commands into ppp_generic.c
compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
compat_ioctl: unify copy-in of ppp filters
tty: handle compat PPP ioctls
compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
compat_ioctl: handle SIOCOUTQNSD
af_unix: add compat_ioctl support
compat_ioctl: reimplement SG_IO handling
compat_ioctl: move WDIOC handling into wdt drivers
fs: compat_ioctl: move FITRIM emulation into file systems
gfs2: add compat_ioctl support
compat_ioctl: remove unused convert_in_user macro
compat_ioctl: remove last RAID handling code
compat_ioctl: remove /dev/raw ioctl translation
compat_ioctl: remove PCI ioctl translation
compat_ioctl: remove joystick ioctl translation
...
Pull x86 asm updates from Ingo Molnar:
"The main changes in this cycle were:
- Cross-arch changes to move the linker sections for NOTES and
EXCEPTION_TABLE into the RO_DATA area, where they belong on most
architectures. (Kees Cook)
- Switch the x86 linker fill byte from x90 (NOP) to 0xcc (INT3), to
trap jumps into the middle of those padding areas instead of
sliding execution. (Kees Cook)
- A thorough cleanup of symbol definitions within x86 assembler code.
The rather randomly named macros got streamlined around a
(hopefully) straightforward naming scheme:
SYM_START(name, linkage, align...)
SYM_END(name, sym_type)
SYM_FUNC_START(name)
SYM_FUNC_END(name)
SYM_CODE_START(name)
SYM_CODE_END(name)
SYM_DATA_START(name)
SYM_DATA_END(name)
etc - with about three times of these basic primitives with some
label, local symbol or attribute variant, expressed via postfixes.
No change in functionality intended. (Jiri Slaby)
- Misc other changes, cleanups and smaller fixes"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
x86/entry/64: Remove pointless jump in paranoid_exit
x86/entry/32: Remove unused resume_userspace label
x86/build/vdso: Remove meaningless CFLAGS_REMOVE_*.o
m68k: Convert missed RODATA to RO_DATA
x86/vmlinux: Use INT3 instead of NOP for linker fill bytes
x86/mm: Report actual image regions in /proc/iomem
x86/mm: Report which part of kernel image is freed
x86/mm: Remove redundant address-of operators on addresses
xtensa: Move EXCEPTION_TABLE to RO_DATA segment
powerpc: Move EXCEPTION_TABLE to RO_DATA segment
parisc: Move EXCEPTION_TABLE to RO_DATA segment
microblaze: Move EXCEPTION_TABLE to RO_DATA segment
ia64: Move EXCEPTION_TABLE to RO_DATA segment
h8300: Move EXCEPTION_TABLE to RO_DATA segment
c6x: Move EXCEPTION_TABLE to RO_DATA segment
arm64: Move EXCEPTION_TABLE to RO_DATA segment
alpha: Move EXCEPTION_TABLE to RO_DATA segment
x86/vmlinux: Move EXCEPTION_TABLE to RO_DATA segment
x86/vmlinux: Actually use _etext for the end of the text segment
vmlinux.lds.h: Allow EXCEPTION_TABLE to live in RO_DATA
...
This kselftest update for Linux 5.5-rc1 adds KUnit, a lightweight unit
testing and mocking framework for the Linux kernel from Brendan Higgins.
KUnit is not an end-to-end testing framework. It is currently supported
on UML and sub-systems can write unit tests and run them in UML env.
KUnit documentation is included in this update.
In addition, this Kunit update adds 3 new kunit tests:
- kunit test for proc sysctl from Iurii Zaikin
- kunit test for the 'list' doubly linked list from David Gow
- ext4 kunit test for decoding extended timestamps from Iurii Zaikin
In the future KUnit will be linked to Kselftest framework to provide
a way to trigger KUnit tests from user-space.
-----BEGIN PGP SIGNATURE-----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=0zEe
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.5-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest KUnit support gtom Shuah Khan:
"This adds KUnit, a lightweight unit testing and mocking framework for
the Linux kernel from Brendan Higgins.
KUnit is not an end-to-end testing framework. It is currently
supported on UML and sub-systems can write unit tests and run them in
UML env. KUnit documentation is included in this update.
In addition, this Kunit update adds 3 new kunit tests:
- proc sysctl test from Iurii Zaikin
- the 'list' doubly linked list test from David Gow
- ext4 tests for decoding extended timestamps from Iurii Zaikin
In the future KUnit will be linked to Kselftest framework to provide a
way to trigger KUnit tests from user-space"
* tag 'linux-kselftest-5.5-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (23 commits)
lib/list-test: add a test for the 'list' doubly linked list
ext4: add kunit test for decoding extended timestamps
Documentation: kunit: Fix verification command
kunit: Fix '--build_dir' option
kunit: fix failure to build without printk
MAINTAINERS: add proc sysctl KUnit test to PROC SYSCTL section
kernel/sysctl-test: Add null pointer test for sysctl.c:proc_dointvec()
MAINTAINERS: add entry for KUnit the unit testing framework
Documentation: kunit: add documentation for KUnit
kunit: defconfig: add defconfigs for building KUnit tests
kunit: tool: add Python wrappers for running KUnit tests
kunit: test: add tests for KUnit managed resources
kunit: test: add the concept of assertions
kunit: test: add tests for kunit test abort
kunit: test: add support for test abort
objtool: add kunit_try_catch_throw to the noreturn list
kunit: test: add initial tests
lib: enable building KUnit in lib/
kunit: test: add the concept of expectations
kunit: test: add assertion printing library
...
All vector drivers now allow a BPF program to be loaded and
associated with the RX socket in the host kernel.
1. The program can be loaded as an extra kernel command line
option to any of the vector drivers.
2. The program can also be loaded as "firmware", using the
ethtool flash option. It is possible to turn this facility
on or off using a command line option.
A simplistic wrapper for generating the BPF firmware for the raw
socket driver out of a tcpdump/libpcap filter expression can be
found at: https://github.com/kot-begemot-uk/uml_vector_utilities/
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
This driver *can* be a module, but then its parameters (socket path)
are untrusted data from inside the VM, and that isn't allowed. Allow
the code to only be built-in to avoid that.
Fixes: 5d38f32499 ("um: drivers: Add virtio vhost-user driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
When we get an interrupt from the socket getting readable,
and start reading, there's a possibility for a race. This
depends on the implementation of the device, but e.g. with
qemu's libvhost-user, we can see:
device virtio_uml
---------------------------------------
write header
get interrupt
read header
read body -> returns -EAGAIN
write body
The -EAGAIN return is because the socket is non-blocking,
and then this leads us to abandon this message.
In fact, we've already read the header, so when the get
another signal/interrupt for the body, we again read it
as though it's a new message header, and also abandon it
for the same reason (wrong size etc.)
This essentially breaks things, and if that message was
one that required a response, it leads to a deadlock as
the device is waiting for the response but we'll never
reply.
Fix this by spinning on -EAGAIN as well when we read the
message body. We need to handle -EAGAIN as "no message"
while reading the header, since we share an interrupt.
Note that this situation is highly unlikely to occur in
normal usage, since there will be very few messages and
only in the startup phase. With the inband call feature
this does tend to happen (eventually) though.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
If the connection drops, just remove the device, we don't try
to recover from this right now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
In the main() code, we eventually enable signals just before
exec() or exit(), in order to to not have signals pending and
delivered *after* the exec().
I've observed SIGSEGV loops at this point, and the reason seems
to be the irqflags tracing; this makes sense as the kernel is
no longer really functional at this point. Since there's really
no reason to use unblock_signals_trace() here (I had just done
a global search & replace), use the plain unblock_signals() in
this case to avoid going into the no longer functional kernel.
Fixes: 0dafcbe128 ("um: Implement TRACE_IRQFLAGS_SUPPORT")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
All watchdog drivers implement the same set of ioctl commands, and
fortunately all of them are compatible between 32-bit and 64-bit
architectures.
Modern drivers always go through drivers/watchdog/wdt.c as an abstraction
layer, but older ones implement their own file_operations on a character
device for this.
Move the handling from fs/compat_ioctl.c into the individual drivers.
Note that most of the legacy drivers will never be used on 64-bit
hardware, because they are for an old 32-bit SoC implementation, but
doing them all at once is safer than trying to guess which ones do
or do not need the compat_ioctl handling.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The SNDCTL_* and SOUND_* commands are the old OSS user interface.
I checked all the sound ioctl commands listed in fs/compat_ioctl.c
to see if we still need the translation handlers. Here is what I
found:
- sound/oss/ is (almost) gone from the kernel, this is what actually
needed all the translations
- The ALSA emulation for OSS correctly handles all compat_ioctl
commands already.
- sound/oss/dmasound/ is the last holdout of the original OSS code,
this is only used on arch/m68k, which has no 64-bit mode and
hence needs no compat handlers
- arch/um/drivers/hostaudio_kern.c may run in 64-bit mode with
32-bit x86 user space underneath it. This rare corner case is
the only one that still needs the compat handlers.
By adding a simple redirect of .compat_ioctl to .unlocked_ioctl in the
UML driver, we can remove all the COMPATIBLE_IOCTL() annotations without
a change in functionality. For completeness, I'm adding the same thing
to the dmasound file, knowing that it makes no difference.
The compat_ioctl list contains one comment about SNDCTL_DSP_MAPINBUF and
SNDCTL_DSP_MAPOUTBUF, which actually would need a translation handler
if implemented. However, the native implementation just returns -EINVAL,
so we don't care.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add defconfig for UML and a fragment that can be used to configure other
architectures for building KUnit tests. Add option to kunit_tool to use
a defconfig to create the kunitconfig.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The naming of pgtable_page_{ctor,dtor}() seems to have confused a few
people, and until recently arm64 used these erroneously/pointlessly for
other levels of page table.
To make it incredibly clear that these only apply to the PTE level, and to
align with the naming of pgtable_pmd_page_{ctor,dtor}(), let's rename them
to pgtable_pte_page_{ctor,dtor}().
These changes were generated with the following shell script:
----
git grep -lw 'pgtable_page_.tor' | while read FILE; do
sed -i '{s/pgtable_page_ctor/pgtable_pte_page_ctor/}' $FILE;
sed -i '{s/pgtable_page_dtor/pgtable_pte_page_dtor/}' $FILE;
done
----
... with the documentation re-flowed to remain under 80 columns, and
whitespace fixed up in macros to keep backslashes aligned.
There should be no functional change as a result of this patch.
Link: http://lkml.kernel.org/r/20190722141133.3116-1-mark.rutland@arm.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both pgtable_cache_init() and pgd_cache_init() are used to initialize kmem
cache for page table allocations on several architectures that do not use
PAGE_SIZE tables for one or more levels of the page table hierarchy.
Most architectures do not implement these functions and use __weak default
NOP implementation of pgd_cache_init(). Since there is no such default
for pgtable_cache_init(), its empty stub is duplicated among most
architectures.
Rename the definitions of pgd_cache_init() to pgtable_cache_init() and
drop empty stubs of pgtable_cache_init().
Link: http://lkml.kernel.org/r/1566457046-22637-1-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Will Deacon <will@kernel.org> [arm64]
Acked-by: Thomas Gleixner <tglx@linutronix.de> [x86]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: remove quicklist page table caches".
A while ago Nicholas proposed to remove quicklist page table caches [1].
I've rebased his patch on the curren upstream and switched ia64 and sh to
use generic versions of PTE allocation.
[1] https://lore.kernel.org/linux-mm/20190711030339.20892-1-npiggin@gmail.com
This patch (of 3):
Remove page table allocator "quicklists". These have been around for a
long time, but have not got much traction in the last decade and are only
used on ia64 and sh architectures.
The numbers in the initial commit look interesting but probably don't
apply anymore. If anybody wants to resurrect this it's in the git
history, but it's unhelpful to have this code and divergent allocator
behaviour for minor archs.
Also it might be better to instead make more general improvements to page
allocator if this is still so slow.
Link: http://lkml.kernel.org/r/1565250728-21721-2-git-send-email-rppt@linux.ibm.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- virtio support
- Fixes for our new time travel mode
- Various improvements to make lockdep and kasan work better
- SPDX header updates
-----BEGIN PGP SIGNATURE-----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=oxpp
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- virtio support
- fixes for our new time travel mode
- various improvements to make lockdep and kasan work better
- SPDX header updates
* tag 'for-linus-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (25 commits)
um: irq: Fix LAST_IRQ usage in init_IRQ()
um: Add SPDX headers for files in arch/um/include
um: Add SPDX headers for files in arch/um/os-Linux
um: Add SPDX headers to files in arch/um/kernel/
um: Add SPDX headers for files in arch/um/drivers
um: virtio: Implement VHOST_USER_PROTOCOL_F_REPLY_ACK
um: virtio: Implement VHOST_USER_PROTOCOL_F_SLAVE_REQ
um: drivers: Add virtio vhost-user driver
um: Use real DMA barriers
um: Don't use generic barrier.h
um: time-travel: Restrict time update in IRQ handler
um: time-travel: Fix periodic timers
um: Enable CONFIG_CONSTRUCTORS
um: Place (soft)irq text with macros
um: Fix VDSO compiler warning
um: Implement TRACE_IRQFLAGS_SUPPORT
um: Remove misleading #define ARCh_IRQ_ENABLED
um: Avoid using uninitialized regs
um: Remove sig_info[SIGALRM]
um: Error handling fixes in vector drivers
...
- add modpost warn exported symbols marked as 'static' because 'static'
and EXPORT_SYMBOL is an odd combination
- break the build early if gold linker is used
- optimize the Bison rule to produce .c and .h files by a single
pattern rule
- handle PREEMPT_RT in the module vermagic and UTS_VERSION
- warn CONFIG options leaked to the user-space except existing ones
- make single targets work properly
- rebuild modules when module linker scripts are updated
- split the module final link stage into scripts/Makefile.modfinal
- fix the missed error code in merge_config.sh
- improve the error message displayed on the attempt of the O= build
in unclean source tree
- remove 'clean-dirs' syntax
- disable -Wimplicit-fallthrough warning for Clang
- add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC
- remove ARCH_{CPP,A,C}FLAGS variables
- add $(BASH) to run bash scripts
- change *CFLAGS_<basetarget>.o to take the relative path to $(obj)
instead of the basename
- stop suppressing Clang's -Wunused-function warnings when W=1
- fix linux/export.h to avoid genksyms calculating CRC of trimmed
exported symbols
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=VGqV
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- add modpost warn exported symbols marked as 'static' because 'static'
and EXPORT_SYMBOL is an odd combination
- break the build early if gold linker is used
- optimize the Bison rule to produce .c and .h files by a single
pattern rule
- handle PREEMPT_RT in the module vermagic and UTS_VERSION
- warn CONFIG options leaked to the user-space except existing ones
- make single targets work properly
- rebuild modules when module linker scripts are updated
- split the module final link stage into scripts/Makefile.modfinal
- fix the missed error code in merge_config.sh
- improve the error message displayed on the attempt of the O= build in
unclean source tree
- remove 'clean-dirs' syntax
- disable -Wimplicit-fallthrough warning for Clang
- add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC
- remove ARCH_{CPP,A,C}FLAGS variables
- add $(BASH) to run bash scripts
- change *CFLAGS_<basetarget>.o to take the relative path to $(obj)
instead of the basename
- stop suppressing Clang's -Wunused-function warnings when W=1
- fix linux/export.h to avoid genksyms calculating CRC of trimmed
exported symbols
- misc cleanups
* tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits)
genksyms: convert to SPDX License Identifier for lex.l and parse.y
modpost: use __section in the output to *.mod.c
modpost: use MODULE_INFO() for __module_depends
export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols
export.h: remove defined(__KERNEL__), which is no longer needed
kbuild: allow Clang to find unused static inline functions for W=1 build
kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN
kbuild: refactor scripts/Makefile.extrawarn
merge_config.sh: ignore unwanted grep errors
kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj)
modpost: add NOFAIL to strndup
modpost: add guid_t type definition
kbuild: add $(BASH) to run scripts with bash-extension
kbuild: remove ARCH_{CPP,A,C}FLAGS
kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC
kbuild: Do not enable -Wimplicit-fallthrough for clang for now
kbuild: clean up subdir-ymn calculation in Makefile.clean
kbuild: remove unneeded '+' marker from cmd_clean
kbuild: remove clean-dirs syntax
kbuild: check clean srctree even earlier
...
LAST_IRQ was used incorrectly in init_IRQ.
Commit 09ccf0364c forgot to update the for loop.
Fix this.
Fixes: 49da7e64f3 ("High Performance UML Vector Network Driver")
Fixes: 09ccf0364c ("um: Fix off by one error in IRQ enumeration")
Signed-off-by: Erel Geron <erelx.geron@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
Convert files to use SPDX header. All files are licensed under the GPLv2.
Signed-off-by: Alex Dewar <alex.dewar@gmx.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
Convert files to use SPDX header. All files are licensed under the GPLv2.
Signed-off-by: Alex Dewar <alex.dewar@gmx.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
Convert files to use SPDX header. All files are licensed under the
GPLv2.
Signed-off-by: Alex Dewar <alex.dewar@gmx.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
Convert files to use SPDX header. All files are licensed under the GPLv2.
Signed-off-by: Alex Dewar <alex.dewar@gmx.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
Implement the VHOST_USER_PROTOCOL_F_REPLY_ACK extension for both
slave requests (previous patch) where we have to reply and our
own requests where it helps understand if the slave failed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Implement the communication channel for the device to notify
us of some events, and notably implement the handling of the
config updates needed for the combination of this feature
and VHOST_USER_PROTOCOL_F_CONFIG.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This module allows virtio devices to be used over a vhost-user socket.
Signed-off-by: Erel Geron <erelx.geron@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
UML has its own platform-specific barrier.h under arch/x86/um/,
which should get used. Fix the build system to use it, and then
fix the barrier.h to actually compile.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
We currently do the time updates in the timer handler, even if
we just call the timer handler ourselves. In basic mode we must
in fact do it there since otherwise the OS timer signal won't
move time forward, but in inf-cpu mode we don't need to, and
it's harder to understand.
Restrict the update there to basic mode, adding a comment, and
do it before calling the timer_handler() in inf-cpu mode.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Periodic timers are broken, because the also only fire once.
As it happens, Linux doesn't care because it only sets the
timer to periodic very briefly during boot, and then switches
it only between one-shot and off later.
Nevertheless, fix the logic (we shouldn't even be looking at
time_travel_timer_expiry unless the timer is enabled) and
change the code to fire the timer periodically in periodic
mode, in case it ever gets used in the future.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
We do need to call the constructors for *modules*, and
at least for KASAN in the future, we must call even the
kernel constructors only later when the kernel has been
initialized.
Instead of relying on libc to call them, emit an empty
section for libc and let the kernel's CONSTRUCTORS code
do the rest of the job.
Tested that it indeed doesn't work in modules, and does
work after the fixes in both, with a few functions with
__attribute__((constructor)) in both dynamic and static
builds.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Otherwise it gets placed without the start/end markers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
UML enables TRACE_IRQFLAGS_SUPPORT but doesn't actually implement
it. It seems to have been added for lockdep support, but that can't
actually really work well without IRQ flags tracing, as is also
very noisily reported when enabling CONFIG_DEBUG_LOCKDEP.
Implement it now.
Fixes: 711553efa5 ("[PATCH] uml: declare in Kconfig our partial LOCKDEP support")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Due to the typo in the name, this can never be used, but
it's also misleading because our value for enabled/disabled
is always just 0/1, not an actual signal mask.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
In timer_real_alarm_handler(), regs is only initialized if
the context argument is non-NULL, also initialize in the
other case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
This entry is misleading, the actual signal handler is
another one that never uses sig_info.
Also remove the SIGALRM if inside sig_handler() for the
same reason.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
With the addition of bess support which uses connection
oriented SEQPACKET sockets the vector routines can now
encounter a "remote end closed the connection" scenario.
This adds handling code to detect it in the TX path and
the legacy RX path. There is no way to detect it in the
vector RX path because that can legitimately return 0
even if the remote end has not closed the connection. As
a result the detection is delayed until the first TX
event after the close.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Adds a sanity check to the parsing of mtu command line param
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This adds support for the UNIX domain socket transports in
general and implements a Netsys::BESS compatible transport
interface.
For details on Netsys::BESS see https://github.com/NetSys/bess
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
1. Adds legacy tap support
2. Renames tap+raw as hybrid
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Fix an off-by-one in IRQ enumeration
Fixes: 49da7e64f3 ("High Performance UML Vector Network Driver")
Reported by: Dana Johnson <djohns042@gmail.com>
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Unfortunately, my build fix for when time travel mode isn't
enabled broke time travel mode, because I forgot that we need
to use the timer time after the timer has been marked disabled,
and thus need to leave the time stored instead of zeroing it.
Fix that by splitting the inline into two, so we can call only
the _mode() one in the relevant code path.
Fixes: b482e48d29 ("um: fix build without CONFIG_UML_TIME_TRAVEL_SUPPORT")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Add CONFIG_ASM_MODVERSIONS. This allows to remove one if-conditional
nesting in scripts/Makefile.build.
scripts/Makefile.build is run every time Kbuild descends into a
sub-directory. So, I want to avoid $(wildcard ...) evaluation
where possible although computing $(wildcard ...) is so cheap that
it may not make measurable performance difference.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
- A new timer mode, time travel, for testing with UML
- Many bugixes/improvements for the serial line driver
- Various bugfixes
-----BEGIN PGP SIGNATURE-----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=xxGu
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- A new timer mode, time travel, for testing with UML
- Many bugixes/improvements for the serial line driver
- Various bugfixes
* tag 'for-linus-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: fix build without CONFIG_UML_TIME_TRAVEL_SUPPORT
um: Fix kcov crash during startup
um: configs: Remove useless UEVENT_HELPER_PATH
um: Support time travel mode
um: Pass nsecs to os timer functions
um: Remove drivers/ssl.h
um: Don't garbage collect in deactivate_all_fds()
um: Silence lockdep complaint about mmap_sem
um: Remove locking in deactivate_all_fds()
um: Timer code cleanup
um: fix os_timer_one_shot()
um: Fix IRQ controller regression on console read
- remove headers_{install,check}_all targets
- remove unreasonable 'depends on !UML' from CONFIG_SAMPLES
- re-implement 'make headers_install' more cleanly
- add new header-test-y syntax to compile-test headers
- compile-test exported headers to ensure they are compilable in
user-space
- compile-test headers under include/ to ensure they are self-contained
- remove -Waggregate-return, -Wno-uninitialized, -Wno-unused-value flags
- add -Werror=unknown-warning-option for Clang
- add 128-bit built-in types support to genksyms
- fix missed rebuild of modules.builtin
- propagate 'No space left on device' error in fixdep to Make
- allow Clang to use its integrated assembler
- improve some coccinelle scripts
- add a new flag KBUILD_ABS_SRCTREE to request Kbuild to use absolute
path for $(srctree).
- do not ignore errors when compression utility is missing
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=E2Rz
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- remove headers_{install,check}_all targets
- remove unreasonable 'depends on !UML' from CONFIG_SAMPLES
- re-implement 'make headers_install' more cleanly
- add new header-test-y syntax to compile-test headers
- compile-test exported headers to ensure they are compilable in
user-space
- compile-test headers under include/ to ensure they are self-contained
- remove -Waggregate-return, -Wno-uninitialized, -Wno-unused-value
flags
- add -Werror=unknown-warning-option for Clang
- add 128-bit built-in types support to genksyms
- fix missed rebuild of modules.builtin
- propagate 'No space left on device' error in fixdep to Make
- allow Clang to use its integrated assembler
- improve some coccinelle scripts
- add a new flag KBUILD_ABS_SRCTREE to request Kbuild to use absolute
path for $(srctree).
- do not ignore errors when compression utility is missing
- misc cleanups
* tag 'kbuild-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (49 commits)
kbuild: use -- separater intead of $(filter-out ...) for cc-cross-prefix
kbuild: Inform user to pass ARCH= for make mrproper
kbuild: fix compression errors getting ignored
kbuild: add a flag to force absolute path for srctree
kbuild: replace KBUILD_SRCTREE with boolean building_out_of_srctree
kbuild: remove src and obj from the top Makefile
scripts/tags.sh: remove unused environment variables from comments
scripts/tags.sh: drop SUBARCH support for ARM
kbuild: compile-test kernel headers to ensure they are self-contained
kheaders: include only headers into kheaders_data.tar.xz
kheaders: remove meaningless -R option of 'ls'
kbuild: support header-test-pattern-y
kbuild: do not create wrappers for header-test-y
kbuild: compile-test exported headers to ensure they are self-contained
init/Kconfig: add CONFIG_CC_CAN_LINK
kallsyms: exclude kasan local symbols on s390
kbuild: add more hints about SUBDIRS replacement
coccinelle: api/stream_open: treat all wait_.*() calls as blocking
coccinelle: put_device: Add a cast to an expression for an assignment
coccinelle: put_device: Adjust a message construction
...
um allocates PTE pages with __get_free_page() and uses
GFP_KERNEL | __GFP_ZERO for the allocations.
Switch it to the generic version that does exactly the same thing for the
kernel page tables and adds __GFP_ACCOUNT for the user PTEs.
The pte_free() and pte_free_kernel() versions are identical to the generic
ones and can be simply dropped.
Link: http://lkml.kernel.org/r/1557296232-15361-14-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Guo Ren <ren_guo@c-sky.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sam Creasey <sammy@sammy.net>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull force_sig() argument change from Eric Biederman:
"A source of error over the years has been that force_sig has taken a
task parameter when it is only safe to use force_sig with the current
task.
The force_sig function is built for delivering synchronous signals
such as SIGSEGV where the userspace application caused a synchronous
fault (such as a page fault) and the kernel responded with a signal.
Because the name force_sig does not make this clear, and because the
force_sig takes a task parameter the function force_sig has been
abused for sending other kinds of signals over the years. Slowly those
have been fixed when the oopses have been tracked down.
This set of changes fixes the remaining abusers of force_sig and
carefully rips out the task parameter from force_sig and friends
making this kind of error almost impossible in the future"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
signal: Remove the signal number and task parameters from force_sig_info
signal: Factor force_sig_info_to_task out of force_sig_info
signal: Generate the siginfo in force_sig
signal: Move the computation of force into send_signal and correct it.
signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
signal: Remove the task parameter from force_sig_fault
signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
signal: Explicitly call force_sig_fault on current
signal/unicore32: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from ptrace_break
signal/nds32: Remove tsk parameter from send_sigtrap
signal/riscv: Remove tsk parameter from do_trap
signal/sh: Remove tsk parameter from force_sig_info_fault
signal/um: Remove task parameter from send_sigtrap
signal/x86: Remove task parameter from send_sigtrap
signal: Remove task parameter from force_sig_mceerr
signal: Remove task parameter from force_sig
signal: Remove task parameter from force_sigsegv
...
When CONFIG_UML_TIME_TRAVEL_SUPPORT isn't set, the build was broken.
Fix this.
Fixes: 065038706f ("um: Support time travel mode")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Kcov fails to start when compiled with kcov. Disable KCOV on
arch/uml/kernel/skas.
$ gdb -q -ex r ./vmlinux
Program received signal SIGSEGV, Segmentation fault.
check_kcov_mode (t=<>, needed_mode=<>) at kernel/kcov.c:70
70 mode = READ_ONCE(t->kcov_mode);
Signed-off-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a57 ("driver: base: Disable
CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
made default to 'n',
2. It is not recommended (help message: "This should not be used today
[...] creates a high system load") and was kept only for ancient
userland,
3. Certain userland specifically requests it to be disabled (systemd
README: "Legacy hotplug slows down the system and confuses udev").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Richard Weinberger <richard@nod.at>
Sometimes it can be useful to run with "time travel" inside the
UML instance, for example for testing. For example, some tests
for the wireless subsystem and userspace are based on hwsim, a
virtual wireless adapter. Some tests can take a long time to
run because they e.g. wait for 120 seconds to elapse for some
regulatory checks. This obviously goes faster if it need not
actually wait that long, but time inside the test environment
just "bumps up" when there's nothing to do.
Add CONFIG_UML_TIME_TRAVEL_SUPPORT to enable code to support
such modes at runtime, selected on the command line:
* just "time-travel", in which time inside the UML instance
can move faster than real time, if there's nothing to do
* "time-travel=inf-cpu" in which time also moves slower and
any CPU processing takes no time at all, which allows to
implement consistent behaviour regardless of host CPU load
(or speed) or debug overhead.
An additional "time-travel-start=<seconds>" parameter is also
supported in this case to start the wall clock at this time
(in unix epoch).
With this enabled, the test mentioned above goes from a runtime
of about 140 seconds (with startup overhead and all) to being
CPU bound and finishing in 15 seconds (on my slow laptop).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This makes the code clearer and lets the time travel patch have
the actual time used for these functions in just one place.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This file just contains two unused prototypes, remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
My previous commit didn't actually address the whole issue with
lockdep shutdown, I had another local modification that disabled
lockdep but that wasn't sufficient alone, so had to do the other
change.
Another issue remained though - during kfree() we acquire locks
and lockdep tries to annotate those with exactly the same issue
in the other patch - we no longer have "current".
So, just remove the garbage collection. There's no value in it
anyway since we're going to shut down anyway and marking a slab
object as free is now not very useful anymore.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
When we get into activate_mm(), lockdep complains that we're doing
something strange:
WARNING: possible circular locking dependency detected
5.1.0-10252-gb00152307319-dirty #121 Not tainted
------------------------------------------------------
inside.sh/366 is trying to acquire lock:
(____ptrval____) (&(&p->alloc_lock)->rlock){+.+.}, at: flush_old_exec+0x703/0x8d7
but task is already holding lock:
(____ptrval____) (&mm->mmap_sem){++++}, at: flush_old_exec+0x6c5/0x8d7
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&mm->mmap_sem){++++}:
[...]
__lock_acquire+0x12ab/0x139f
lock_acquire+0x155/0x18e
down_write+0x3f/0x98
flush_old_exec+0x748/0x8d7
load_elf_binary+0x2ca/0xddb
[...]
-> #0 (&(&p->alloc_lock)->rlock){+.+.}:
[...]
__lock_acquire+0x12ab/0x139f
lock_acquire+0x155/0x18e
_raw_spin_lock+0x30/0x83
flush_old_exec+0x703/0x8d7
load_elf_binary+0x2ca/0xddb
[...]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&mm->mmap_sem);
lock(&(&p->alloc_lock)->rlock);
lock(&mm->mmap_sem);
lock(&(&p->alloc_lock)->rlock);
*** DEADLOCK ***
2 locks held by inside.sh/366:
#0: (____ptrval____) (&sig->cred_guard_mutex){+.+.}, at: __do_execve_file+0x12d/0x869
#1: (____ptrval____) (&mm->mmap_sem){++++}, at: flush_old_exec+0x6c5/0x8d7
stack backtrace:
CPU: 0 PID: 366 Comm: inside.sh Not tainted 5.1.0-10252-gb00152307319-dirty #121
Stack:
[...]
Call Trace:
[<600420de>] show_stack+0x13b/0x155
[<6048906b>] dump_stack+0x2a/0x2c
[<6009ae64>] print_circular_bug+0x332/0x343
[<6009c5c6>] check_prev_add+0x669/0xdad
[<600a06b4>] __lock_acquire+0x12ab/0x139f
[<6009f3d0>] lock_acquire+0x155/0x18e
[<604a07e0>] _raw_spin_lock+0x30/0x83
[<60151e6a>] flush_old_exec+0x703/0x8d7
[<601a8eb8>] load_elf_binary+0x2ca/0xddb
[...]
I think it's because in exec_mmap() we have
down_read(&old_mm->mmap_sem);
...
task_lock(tsk);
...
activate_mm(active_mm, mm);
(which does down_write(&mm->mmap_sem))
I'm not really sure why lockdep throws in the whole knowledge
about the task lock, but it seems that old_mm and mm shouldn't
ever be the same (and it doesn't deadlock) so tell lockdep that
they're different.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Not only does the locking contradict the comment, and as
the comment says is pointless and actually harmful (all
the actual OS threads have exited already), but it also
causes crashes when lockdep is enabled, because calling
into the spinlock calls into lockdep, which then tries
to determine the current task, which no longer exists.
Remove the locking to let UML shut down cleanly in case
lockdep is enabled.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
There are some unused functions, and some others that have
unused arguments; clean up the timer code a bit.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
os_timer_one_shot() gets passed a value "unsigned long delta",
so must not have an "int ticks" as that actually ends up being
-1, and thus triggering a timer over and over again.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The conversion of UML to use epoll based IRQ controller claimed that
clone_one_chan() can safely call um_free_irq() while starting to ignore
the delay_free_irq parameter that explicitly noted that the IRQ cannot
be freed because this is being called from chan_interrupt(). This
resulted in free_irq() getting called in interrupt context ("Trying to
free IRQ 6 from IRQ context!").
Fix this by restoring previously used delay_free_irq processing.
Fixes: ff6a17989c ("Epoll based IRQ controller")
Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg