Commit Graph

2274 Commits

Author SHA1 Message Date
David S. Miller bf47f4b0ba Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/ipmr-2.6 2010-05-12 23:30:45 -07:00
David S. Miller 278554bd65 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/net/wireless/ath/ar9170/usb.c
	drivers/scsi/iscsi_tcp.c
	net/ipv4/ipmr.c
2010-05-12 00:05:35 -07:00
Patrick McHardy cba7a98a47 Merge branch 'master' of git://dev.medozas.de/linux 2010-05-11 18:59:21 +02:00
Jan Engelhardt 4538506be3 netfilter: xtables: combine built-in extension structs
Prepare the arrays for use with the multiregister function. The
future layer-3 xt matches can then be easily added to it without
needing more (un)register code.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-05-11 18:36:18 +02:00
Jan Engelhardt b4ba26119b netfilter: xtables: change hotdrop pointer to direct modification
Since xt_action_param is writable, let's use it. The pointer to
'bool hotdrop' always worried (8 bytes (64-bit) to write 1 byte!).
Surprisingly results in a reduction in size:

   text    data     bss filename
5457066  692730  357892 vmlinux.o-prev
5456554  692730  357892 vmlinux.o

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-05-11 18:35:27 +02:00
Jan Engelhardt 62fc805108 netfilter: xtables: deconstify struct xt_action_param for matches
In future, layer-3 matches will be an xt module of their own, and
need to set the fragoff and thoff fields. Adding more pointers would
needlessy increase memory requirements (esp. so for 64-bit, where
pointers are wider).

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-05-11 18:33:37 +02:00
Jan Engelhardt 4b560b447d netfilter: xtables: substitute temporary defines by final name
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-05-11 18:31:17 +02:00
Jan Engelhardt de74c16996 netfilter: xtables: combine struct xt_match_param and xt_target_param
The structures carried - besides match/target - almost the same data.
It is possible to combine them, as extensions are evaluated serially,
and so, the callers end up a little smaller.

  text  data  bss  filename
-15318   740  104  net/ipv4/netfilter/ip_tables.o
+15286   740  104  net/ipv4/netfilter/ip_tables.o
-15333   540  152  net/ipv6/netfilter/ip6_tables.o
+15269   540  152  net/ipv6/netfilter/ip6_tables.o

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-05-11 18:23:43 +02:00
Patrick McHardy 5b285cac35 ipv6: ip6mr: add support for dumping routing tables over netlink
The ip6mr /proc interface (ip6_mr_cache) can't be extended to dump routes
from any tables but the main table in a backwards compatible fashion since
the output format ends in a variable amount of output interfaces.

Introduce a new netlink interface to dump multicast routes from all tables,
similar to the netlink interface for regular routes.

Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-05-11 14:40:56 +02:00
Patrick McHardy d1db275dd3 ipv6: ip6mr: support multiple tables
This patch adds support for multiple independant multicast routing instances,
named "tables".

Userspace multicast routing daemons can bind to a specific table instance by
issuing a setsockopt call using a new option MRT6_TABLE. The table number is
stored in the raw socket data and affects all following ip6mr setsockopt(),
getsockopt() and ioctl() calls. By default, a single table (RT6_TABLE_DFLT)
is created with a default routing rule pointing to it. Newly created pim6reg
devices have the table number appended ("pim6regX"), with the exception of
devices created in the default table, which are named just "pim6reg" for
compatibility reasons.

Packets are directed to a specific table instance using routing rules,
similar to how regular routing rules work. Currently iif, oif and mark
are supported as keys, source and destination addresses could be supported
additionally.

Example usage:

- bind pimd/xorp/... to a specific table:

uint32_t table = 123;
setsockopt(fd, SOL_IPV6, MRT6_TABLE, &table, sizeof(table));

- create routing rules directing packets to the new table:

# ip -6 mrule add iif eth0 lookup 123
# ip -6 mrule add oif eth0 lookup 123

Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-05-11 14:40:55 +02:00
Patrick McHardy 6bd5214339 ipv6: ip6mr: move mroute data into seperate structure
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-05-11 14:40:53 +02:00
Patrick McHardy f30a778421 ipv6: ip6mr: convert struct mfc_cache to struct list_head
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-05-11 14:40:51 +02:00
Patrick McHardy b5aa30b191 ipv6: ip6mr: remove net pointer from struct mfc6_cache
Now that cache entries in unres_queue don't need to be distinguished by their
network namespace pointer anymore, we can remove it from struct mfc6_cache
add pass the namespace as function argument to the functions that need it.

Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-05-11 14:40:50 +02:00
Patrick McHardy c476efbcde ipv6: ip6mr: move unres_queue and timer to per-namespace data
The unres_queue is currently shared between all namespaces. Following patches
will additionally allow to create multiple multicast routing tables in each
namespace. Having a single shared queue for all these users seems to excessive,
move the queue and the cleanup timer to the per-namespace data to unshare it.

As a side-effect, this fixes a bug in the seq file iteration functions: the
first entry returned is always from the current namespace, entries returned
after that may belong to any namespace.

Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-05-11 14:40:48 +02:00
Patrick McHardy 1e4b105712 Merge branch 'master' of /repos/git/net-next-2.6
Conflicts:
	net/bridge/br_device.c
	net/bridge/br_forward.c

Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-05-10 18:39:28 +02:00
Bjørn Mork d6bc0149d8 ipv6: udp: make short packet logging consistent with ipv4
Adding addresses and ports to the short packet log message,
like ipv4/udp.c does it, makes these messages a lot more useful:

[  822.182450] UDPv6: short packet: From [2001:db8:ffb4:3::1]:47839 23715/178 to [2001:db8:ffb4:3:5054:ff:feff:200]:1234

This requires us to drop logging in case pskb_may_pull() fails,
which also is consistent with ipv4/udp.c

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 21:50:17 -07:00
Brian Haley d40a4de0be IPv6: fix IPV6_RECVERR handling of locally-generated errors
I noticed when I added support for IPV6_DONTFRAG that if you set
IPV6_RECVERR and tried to send a UDP packet larger than 64K to an
IPv6 destination, you'd correctly get an EMSGSIZE, but reading from
MSG_ERRQUEUE returned the incorrect address in the cmsg:

struct msghdr:
	 msg_name         0x7fff8f3c96d0
	 msg_namelen      28
struct sockaddr_in6:
	 sin6_family      10
	 sin6_port        7639
	 sin6_flowinfo    0
	 sin6_addr        ::ffff:38.32.0.0
	 sin6_scope_id    0  ((null))

It should have returned this in my case:

struct msghdr:
	 msg_name         0x7fffd866b510
	 msg_namelen      28
struct sockaddr_in6:
	 sin6_family      10
	 sin6_port        7639
	 sin6_flowinfo    0
	 sin6_addr        2620:0:a09:e000:21f:29ff:fe57:f88b
	 sin6_scope_id    0  ((null))

The problem is that ipv6_recv_error() assumes that if the error
wasn't generated by ICMPv6, it's an IPv4 address sitting there,
and proceeds to create a v4-mapped address from it.

Change ipv6_icmp_error() and ipv6_local_error() to set skb->protocol
to htons(ETH_P_IPV6) so that ipv6_recv_error() knows the address
sitting right after the extended error is IPv6, else it will
incorrectly map the first octet into an IPv4-mapped IPv6 address
in the cmsg structure returned in a recvmsg() call to obtain
the error.

Signed-off-by: Brian Haley <brian.haley@hp.com>

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:32:40 -07:00
David S. Miller f935aa9e99 ipv6: Fix default multicast hops setting.
As per RFC 3493 the default multicast hops setting
for a socket should be "1" just like ipv4.

Ironically we have a IPV6_DEFAULT_MCASTHOPS macro
it just wasn't being used.

Reported-by: Elliot Hughes <enh@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 23:42:27 -07:00
Eric Dumazet 4f70ecca9c net: rcu fixes
Add hlist_for_each_entry_rcu_bh() and
hlist_for_each_entry_continue_rcu_bh() macros, and use them in
ipv6_get_ifaddr(), if6_get_first() and if6_get_next() to fix lockdeps
warnings.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 15:53:54 -07:00
David S. Miller 7ef527377b Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2010-05-02 22:02:06 -07:00
Jan Engelhardt ef53d702c3 netfilter: xtables: dissolve do_match function
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-05-02 14:13:03 +02:00
Dan Carpenter 83d7eb2979 ipv6: cleanup: remove unneeded null check
We dereference "sk" unconditionally elsewhere in the function.  

This was left over from:  b30bd282 "ip6_xmit: remove unnecessary NULL
ptr check".  According to that commit message, "the sk argument to 
ip6_xmit is never NULL nowadays since the skb->priority assigment 
expects a valid socket."

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-30 16:42:08 -07:00
Eric Dumazet f84af32cbc net: ip_queue_rcv_skb() helper
When queueing a skb to socket, we can immediately release its dst if
target socket do not use IP_CMSG_PKTINFO.

tcp_data_queue() can drop dst too.

This to benefit from a hot cache line and avoid the receiver, possibly
on another cpu, to dirty this cache line himself.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 15:31:51 -07:00
Eric Dumazet 4b0b72f7dd net: speedup udp receive path
Since commit 95766fff ([UDP]: Add memory accounting.), 
each received packet needs one extra sock_lock()/sock_release() pair.

This added latency because of possible backlog handling. Then later,
ticket spinlocks added yet another latency source in case of DDOS.

This patch introduces lock_sock_bh() and unlock_sock_bh()
synchronization primitives, avoiding one atomic operation and backlog
processing.

skb_free_datagram_locked() uses them instead of full blown
lock_sock()/release_sock(). skb is orphaned inside locked section for
proper socket memory reclaim, and finally freed outside of it.

UDP receive path now take the socket spinlock only once.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 14:35:48 -07:00
David S. Miller 8d238b25b1 Revert "tcp: bind() fix when many ports are bound"
This reverts two commits:

fda48a0d7a
tcp: bind() fix when many ports are bound

and a follow-on fix for it:

6443bb1fc2
ipv6: Fix inet6_csk_bind_conflict()

It causes problems with binding listening sockets when time-wait
sockets from a previous instance still are alive.

It's too late to keep fiddling with this so late in the -rc
series, and we'll deal with it in net-next-2.6 instead.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 11:25:59 -07:00
Eric Dumazet c377411f24 net: sk_add_backlog() take rmem_alloc into account
Current socket backlog limit is not enough to really stop DDOS attacks,
because user thread spend many time to process a full backlog each
round, and user might crazy spin on socket lock.

We should add backlog size and receive_queue size (aka rmem_alloc) to
pace writers, and let user run without being slow down too much.

Introduce a sk_rcvqueues_full() helper, to avoid taking socket lock in
stress situations.

Under huge stress from a multiqueue/RPS enabled NIC, a single flow udp
receiver can now process ~200.000 pps (instead of ~100 pps before the
patch) on a 8 core machine.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27 15:13:20 -07:00
David S. Miller bb61187465 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/ipmr-2.6 2010-04-27 12:57:39 -07:00
David S. Miller e1703b36c3 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/e100.c
	drivers/net/e1000e/netdev.c
2010-04-27 12:49:13 -07:00
Patrick McHardy 25239cee7e net: rtnetlink: decouple rtnetlink address families from real address families
Decouple rtnetlink address families from real address families in socket.h to
be able to add rtnetlink interfaces to code that is not a real address family
without increasing AF_MAX/NPROTO.

This will be used to add support for multicast route dumping from all tables
as the proc interface can't be extended to support anything but the main table
without breaking compatibility.

This partialy undoes the patch to introduce independant families for routing
rules and converts ipmr routing rules to a new rtnetlink family. Similar to
that patch, values up to 127 are reserved for real address families, values
above that may be used arbitrarily.

Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-26 16:13:54 +02:00
Patrick McHardy 3d0c9c4eb2 net: fib_rules: mark arguments to fib_rules_register const and __net_initdata
fib_rules_register() duplicates the template passed to it without modification,
mark the argument as const. Additionally the templates are only needed when
instantiating a new namespace, so mark them as __net_initdata, which means
they can be discarded when CONFIG_NET_NS=n.

Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-26 16:02:04 +02:00
Eric Dumazet 6443bb1fc2 ipv6: Fix inet6_csk_bind_conflict()
Commit fda48a0d7a (tcp: bind() fix when many ports are bound)
introduced a bug on IPV6 part.
We should not call ipv6_addr_any(inet6_rcv_saddr(sk2)) but
ipv6_addr_any(inet6_rcv_saddr(sk)) because sk2 can be IPV4, while sk is
IPV6.

Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-25 15:09:42 -07:00
David S. Miller b7d6a43211 Merge branch 'net-next-2.6_20100423a/br/br_multicast_v3' of git://git.linux-ipv6.org/gitroot/yoshfuji/linux-2.6-next 2010-04-23 23:37:24 -07:00
Brian Haley 4b340ae20d IPv6: Complete IPV6_DONTFRAG support
Finally add support to detect a local IPV6_DONTFRAG event
and return the relevant data to the user if they've enabled
IPV6_RECVPATHMTU on the socket.  The next recvmsg() will
return no data, but have an IPV6_PATHMTU as ancillary data.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23 23:35:29 -07:00
Brian Haley 13b52cd446 IPv6: Add dontfrag argument to relevant functions
Add dontfrag argument to relevant functions for
IPV6_DONTFRAG support, as well as allowing the value
to be passed-in via ancillary cmsg data.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23 23:35:28 -07:00
Brian Haley 793b147316 IPv6: data structure changes for new socket options
Add underlying data structure changes and basic setsockopt()
and getsockopt() support for IPV6_RECVPATHMTU, IPV6_PATHMTU,
and IPV6_DONTFRAG.  IPV6_PATHMTU is actually fully functional
at this point.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23 23:35:28 -07:00
YOSHIFUJI Hideaki 6e7cb83707 ipv6 mcast: Introduce include/net/mld.h for MLD definitions.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2010-04-23 13:35:55 +09:00
Eric Dumazet fda48a0d7a tcp: bind() fix when many ports are bound
Port autoselection done by kernel only works when number of bound
sockets is under a threshold (typically 30000).

When this threshold is over, we must check if there is a conflict before
exiting first loop in inet_csk_get_port()

Change inet_csk_bind_conflict() to forbid two reuse-enabled sockets to
bind on same (address,port) tuple (with a non ANY address)

Same change for inet6_csk_bind_conflict()

Reported-by: Gaspar Chilingarov <gasparch@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22 19:06:06 -07:00
Stephen Hemminger e802af9cab IPv6: Generic TTL Security Mechanism (final version)
This patch adds IPv6 support for RFC5082 Generalized TTL Security Mechanism.  

Not to users of mapped address; the IPV6 and IPV4 socket options are seperate.
The server does have to deal with both IPv4 and IPv6 socket options
and the client has to handle the different for each family.

On client:
	int ttl = 255;
	getaddrinfo(argv[1], argv[2], &hint, &result);

	for (rp = result; rp != NULL; rp = rp->ai_next) {
		s = socket(rp->ai_family, rp->ai_socktype, rp->ai_protocol);
		if (s < 0) continue;

		if (rp->ai_family == AF_INET) {
			setsockopt(s, IPPROTO_IP, IP_TTL, &ttl, sizeof(ttl));
		} else if (rp->ai_family == AF_INET6) {
			setsockopt(s, IPPROTO_IPV6,  IPV6_UNICAST_HOPS, 
					&ttl, sizeof(ttl)))
		}
			
		if (connect(s, rp->ai_addr, rp->ai_addrlen) == 0) {
		   ...

On server:
	int minttl = 255 - maxhops;
   
	getaddrinfo(NULL, port, &hints, &result);
	for (rp = result; rp != NULL; rp = rp->ai_next) {
		s = socket(rp->ai_family, rp->ai_socktype, rp->ai_protocol);
		if (s < 0) continue;

		if (rp->ai_family == AF_INET6)
			setsockopt(s, IPPROTO_IPV6,  IPV6_MINHOPCOUNT,
					&minttl, sizeof(minttl));
		setsockopt(s, IPPROTO_IP, IP_MINTTL, &minttl, sizeof(minttl));
			
		if (bind(s, rp->ai_addr, rp->ai_addrlen) == 0)
			break
...

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22 15:24:53 -07:00
Jiri Olsa f4f914b580 net: ipv6 bind to device issue
The issue raises when having 2 NICs both assigned the same
IPv6 global address.

If a sender binds to a particular NIC (SO_BINDTODEVICE),
the outgoing traffic is being sent via the first found.
The bonded device is thus not taken into an account during the
routing.

From the ip6_route_output function:

If the binding address is multicast, linklocal or loopback,
the RT6_LOOKUP_F_IFACE bit is set, but not for global address.

So binding global address will neglect SO_BINDTODEVICE-binded device,
because the fib6_rule_lookup function path won't check for the
flowi::oif field and take first route that fits.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Scott Otto <scott.otto@alcatel-lucent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21 22:59:24 -07:00
Shan Wei f2228f785a ipv6: allow to send packet after receiving ICMPv6 Too Big message with MTU field less than IPV6_MIN_MTU
According to RFC2460, PMTU is set to the IPv6 Minimum Link
MTU (1280) and a fragment header should always be included
after a node receiving Too Big message reporting PMTU is
less than the IPv6 Minimum Link MTU.

After receiving a ICMPv6 Too Big message reporting PMTU is
less than the IPv6 Minimum Link MTU, sctp *can't* send any
data/control chunk that total length including IPv6 head
and IPv6 extend head is less than IPV6_MIN_MTU(1280 bytes).

The failure occured in p6_fragment(), about reason
see following(take SHUTDOWN chunk for example):
sctp_packet_transmit (SHUTDOWN chunk, len=16 byte)
|------sctp_v6_xmit (local_df=0)
   |------ip6_xmit
       |------ip6_output (dst_allfrag is ture)
           |------ip6_fragment

In ip6_fragment(), for local_df=0, drops the the packet
and returns EMSGSIZE.

The patch fixes it with adding check length of skb->len.
In this case, Ipv6 not to fragment upper protocol data,
just only add a fragment header before it.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21 22:48:26 -07:00
Nicolas Dichtel bc8e4b954e xfrm6: ensure to use the same dev when building a bundle
When building a bundle, we set dst.dev and rt6.rt6i_idev.
We must ensure to set the same device for both fields.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21 16:25:30 -07:00
David S. Miller e5700aff14 tcp: Mark v6 response packets as CHECKSUM_PARTIAL
Otherwise we only get the checksum right for data-less TCP responses.

Noticed by Herbert Xu.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21 14:59:20 -07:00
David S. Miller f71b70e115 tcp: Fix ipv6 checksumming on response packets for real.
Commit 6651ffc8e8
("ipv6: Fix tcp_v6_send_response transport header setting.")
fixed one half of why ipv6 tcp response checksums were
invalid, but it's not the whole story.

If we're going to use CHECKSUM_PARTIAL for these things (which we are
since commit 2e8e18ef52 "tcp: Set
CHECKSUM_UNNECESSARY in tcp_init_nondata_skb"), we can't be setting
buff->csum as we always have been here in tcp_v6_send_response.  We
need to leave it at zero.

Kill that line and checksums are good again.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21 01:57:01 -07:00
David S. Miller 87eb367003 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/wireless/iwlwifi/iwl-6000.c
	net/core/dev.c
2010-04-21 01:14:25 -07:00
Herbert Xu 6651ffc8e8 ipv6: Fix tcp_v6_send_response transport header setting.
My recent patch to remove the open-coded checksum sequence in
tcp_v6_send_response broke it as we did not set the transport
header pointer on the new packet.

Actually, there is code there trying to set the transport
header properly, but it sets it for the wrong skb ('skb'
instead of 'buff').

This bug was introduced by commit
a8fdf2b331 ("ipv6: Fix
tcp_v6_send_response(): it didn't set skb transport header")

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21 00:47:15 -07:00
Eric Dumazet 0eae88f31c net: Fix various endianness glitches
Sparse can help us find endianness bugs, but we need to make some
cleanups to be able to more easily spot real bugs.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-20 19:06:52 -07:00
Patrick McHardy 6291055465 Merge branch 'master' of /repos/git/net-next-2.6
Conflicts:
	Documentation/feature-removal-schedule.txt
	net/ipv6/netfilter/ip6t_REJECT.c
	net/netfilter/xt_limit.c

Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-20 16:02:01 +02:00
Jan Engelhardt 5b775eb1c0 netfilter: xtables: remove old comments about reentrancy
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-19 16:07:47 +02:00
Jan Engelhardt cd58bcd978 netfilter: xt_TEE: have cloned packet travel through Xtables too
Since Xtables is now reentrant/nestable, the cloned packet can also go
through Xtables and be subject to rules itself.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-19 16:06:52 +02:00
Jan Engelhardt f3c5c1bfd4 netfilter: xtables: make ip_tables reentrant
Currently, the table traverser stores return addresses in the ruleset
itself (struct ip6t_entry->comefrom). This has a well-known drawback:
the jumpstack is overwritten on reentry, making it necessary for
targets to return absolute verdicts. Also, the ruleset (which might
be heavy memory-wise) needs to be replicated for each CPU that can
possibly invoke ip6t_do_table.

This patch decouples the jumpstack from struct ip6t_entry and instead
puts it into xt_table_info. Not being restricted by 'comefrom'
anymore, we can set up a stack as needed. By default, there is room
allocated for two entries into the traverser.

arp_tables is not touched though, because there is just one/two
modules and further patches seek to collapse the table traverser
anyhow.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-19 16:05:10 +02:00
Jan Engelhardt e281b19897 netfilter: xtables: inclusion of xt_TEE
xt_TEE can be used to clone and reroute a packet. This can for
example be used to copy traffic at a router for logging purposes
to another dedicated machine.

References: http://www.gossamer-threads.com/lists/iptables/devel/68781
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-19 14:17:47 +02:00
Shan Wei b5d4399823 ipv6: fix the comment of ip6_xmit()
ip6_xmit() is used by upper transport protocol.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-15 23:36:38 -07:00
Shan Wei 4e15ed4d93 net: replace ipfragok with skb->local_df
As Herbert Xu said: we should be able to simply replace ipfragok
with skb->local_df. commit f88037(sctp: Drop ipfargok in sctp_xmit function)
has droped ipfragok and set local_df value properly.

The patch kills the ipfragok parameter of .queue_xmit().

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-15 23:36:37 -07:00
Shan Wei 0eecb78494 ipv6: cancel to setting local_df in ip6_xmit()
commit f88037(sctp: Drop ipfargok in sctp_xmit function)
has droped ipfragok and set local_df value properly.

So the change of commit 77e2f1(ipv6: Fix ip6_xmit to
send fragments if ipfragok is true) is not needed.
So the patch remove them.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-15 23:36:37 -07:00
Eric Dumazet e30b38c298 ip: Fix ip_dev_loopback_xmit()
Eric Paris got following trace with a linux-next kernel

[   14.203970] BUG: using smp_processor_id() in preemptible [00000000]
code: avahi-daemon/2093
[   14.204025] caller is netif_rx+0xfa/0x110
[   14.204035] Call Trace:
[   14.204064]  [<ffffffff81278fe5>] debug_smp_processor_id+0x105/0x110
[   14.204070]  [<ffffffff8142163a>] netif_rx+0xfa/0x110
[   14.204090]  [<ffffffff8145b631>] ip_dev_loopback_xmit+0x71/0xa0
[   14.204095]  [<ffffffff8145b892>] ip_mc_output+0x192/0x2c0
[   14.204099]  [<ffffffff8145d610>] ip_local_out+0x20/0x30
[   14.204105]  [<ffffffff8145d8ad>] ip_push_pending_frames+0x28d/0x3d0
[   14.204119]  [<ffffffff8147f1cc>] udp_push_pending_frames+0x14c/0x400
[   14.204125]  [<ffffffff814803fc>] udp_sendmsg+0x39c/0x790
[   14.204137]  [<ffffffff814891d5>] inet_sendmsg+0x45/0x80
[   14.204149]  [<ffffffff8140af91>] sock_sendmsg+0xf1/0x110
[   14.204189]  [<ffffffff8140dc6c>] sys_sendmsg+0x20c/0x380
[   14.204233]  [<ffffffff8100ad82>] system_call_fastpath+0x16/0x1b

While current linux-2.6 kernel doesnt emit this warning, bug is latent
and might cause unexpected failures.

ip_dev_loopback_xmit() runs in process context, preemption enabled, so
must call netif_rx_ni() instead of netif_rx(), to make sure that we
process pending software interrupt.

Same change for ip6_dev_loopback_xmit()

Reported-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-15 14:25:22 -07:00
Patrick McHardy f0d57a54aa netfilter: ipt_LOG/ip6t_LOG: use more appropriate log level as default
Use KERN_NOTICE instead of KERN_EMERG by default. This only affects
kernel internal logging (like conntrack), user-specified logging rules
contain a seperate log level.

Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-15 19:09:01 +02:00
Ulrich Weber 90348e0ede netfilter: ipv6: move xfrm_lookup at end of ip6_route_me_harder
xfrm_lookup should be called after ip6_route_output skb_dst_set,
otherwise skb_dst_set of xfrm_lookup is pointless

Signed-off-by: Ulrich Weber <uweber@astaro.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-15 12:37:18 +02:00
Patrick McHardy 0f87b1dd01 net: fib_rules: decouple address families from real address families
Decouple the address family values used for fib_rules from the real
address families in socket.h. This allows to use fib_rules for
code that is not a real address family without increasing AF_MAX/NPROTO.

Values up to 127 are reserved for real address families and map directly
to the corresponding AF value, values starting from 128 are for other
uses. rtnetlink is changed to invoke the AF_UNSPEC dumpit/doit handlers
for these families.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13 14:49:31 -07:00
Patrick McHardy 28bb17268b net: fib_rules: set family in fib_rule_hdr centrally
All fib_rules implementations need to set the family in their ->fill()
functions. Since the value is available to the generic fib_nl_fill_rule()
function, set it there.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13 14:49:30 -07:00
Jan Engelhardt 9c6eb28aca netfilter: ipv6: add IPSKB_REROUTED exclusion to NF_HOOK/POSTROUTING invocation
Similar to how IPv4's ip_output.c works, have ip6_output also check
the IPSKB_REROUTED flag. It will be set from xt_TEE for cloned packets
since Xtables can currently only deal with a single packet in flight
at a time.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Acked-by: David S. Miller <davem@davemloft.net>
[Patrick: changed to use an IP6SKB value instead of IPSKB]
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-13 15:32:16 +02:00
Jan Engelhardt 9e50849054 netfilter: ipv6: move POSTROUTING invocation before fragmentation
Patrick McHardy notes: "We used to invoke IPv4 POST_ROUTING after
fragmentation as well just to defragment the packets in conntrack
immediately afterwards, but that got changed during the
netfilter-ipsec integration. Ideally IPv6 would behave like IPv4."

This patch makes it so. Sending an oversized frame (e.g. `ping6
-s64000 -c1 ::1`) will now show up in POSTROUTING as a single skb
rather than multiple ones.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-13 15:28:11 +02:00
stephen hemminger 8595805aaf IPv6: only notify protocols if address is compeletely gone
The notifier for address down should only be called if address is completely
gone, not just being marked as tentative on link transistion. The code
in net-next would case bonding/sctp/s390 to see address disappear on link
down, but they would never see it reappear on link up.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13 02:29:28 -07:00
stephen hemminger d1f84c63a4 ipv6: additional ref count for hash list unnecessary
Since an address in hash list has to already have a ref count,
no additional ref count is needed.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13 02:29:28 -07:00
stephen hemminger 27bdb2abcc IPv6: keep tentative addresses in hash table
When link goes down, want address to be preserved but in a tentative
state, therefore it has to stay in hash list.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13 02:29:27 -07:00
stephen hemminger 93fa159abe IPv6: keep route for tentative address
Recent changes preserve IPv6 address when link goes down (good).
But would cause address to point to dead dst entry (bad).
The simplest fix is to just not delete route if address is
being held for later use.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13 02:29:27 -07:00
Eric Dumazet b6c6712a42 net: sk_dst_cache RCUification
With latest CONFIG_PROVE_RCU stuff, I felt more comfortable to make this
work.

sk->sk_dst_cache is currently protected by a rwlock (sk_dst_lock)

This rwlock is readlocked for a very small amount of time, and dst
entries are already freed after RCU grace period. This calls for RCU
again :)

This patch converts sk_dst_lock to a spinlock, and use RCU for readers.

__sk_dst_get() is supposed to be called with rcu_read_lock() or if
socket locked by user, so use appropriate rcu_dereference_check()
condition (rcu_read_lock_held() || sock_owned_by_user(sk))

This patch avoids two atomic ops per tx packet on UDP connected sockets,
for example, and permits sk_dst_lock to be much less dirtied.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13 01:41:33 -07:00
Herbert Xu bb29624614 inet: Remove unused send_check length argument
inet: Remove unused send_check length argument

This patch removes the unused length argument from the send_check
function in struct inet_connection_sock_af_ops.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Yinghai <yinghai.lu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-11 15:29:09 -07:00
Herbert Xu 8ad50d96db tcp: Handle CHECKSUM_PARTIAL for SYNACK packets for IPv6
tcp: Handle CHECKSUM_PARTIAL for SYNACK packets for IPv6

This patch moves the common code between tcp_v6_send_check and
tcp_v6_gso_send_check into a new function __tcp_v6_send_check.

It then uses the new function in tcp_v6_send_synack as well as
tcp_v6_send_response so that they handle CHECKSUM_PARTIAL properly.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Yinghai <yinghai.lu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-11 15:29:08 -07:00
David S. Miller 871039f02f Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/stmmac/stmmac_main.c
	drivers/net/wireless/wl12xx/wl1271_cmd.c
	drivers/net/wireless/wl12xx/wl1271_main.c
	drivers/net/wireless/wl12xx/wl1271_spi.c
	net/core/ethtool.c
	net/mac80211/scan.c
2010-04-11 14:53:53 -07:00
David S. Miller 4a1032faac Merge branch 'master' of /home/davem/src/GIT/linux-2.6/ 2010-04-11 02:44:30 -07:00
Jorge Boncompte [DTI2] 1223c67c09 udp: fix for unicast RX path optimization
Commits 5051ebd275 and
5051ebd275 ("ipv[46]: udp: optimize unicast RX
path") broke some programs.

	After upgrading a L2TP server to 2.6.33 it started to fail, tunnels going up an
down, after the 10th tunnel came up. My modified rp-l2tp uses a global
unconnected socket bound to (INADDR_ANY, 1701) and one connected socket per
tunnel after parameter negotiation.

	After ten sockets were open and due to mixed parameters to
udp[46]_lib_lookup2() kernel started to drop packets.

Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-08 11:29:13 -07:00
Herbert Xu 5dd59cc991 netfilter: only do skb_checksum_help on CHECKSUM_PARTIAL in ip6_queue
As we will set ip_summed to CHECKSUM_NONE when necessary in
ipq_mangle_ipv6, there is no need to zap CHECKSUM_COMPLETE in
ipq_build_packet_message.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-08 14:53:40 +02:00
Timo Teräs 80c802f307 xfrm: cache bundles instead of policies for outgoing flows
__xfrm_lookup() is called for each packet transmitted out of
system. The xfrm_find_bundle() does a linear search which can
kill system performance depending on how many bundles are
required per policy.

This modifies __xfrm_lookup() to store bundles directly in
the flow cache. If we did not get a hit, we just create a new
bundle instead of doing slow search. This means that we can now
get multiple xfrm_dst's for same flow (on per-cpu basis).

Signed-off-by: Timo Teras <timo.teras@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07 03:43:19 -07:00
David S. Miller 4a35ecf8bf Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/bonding/bond_main.c
	drivers/net/via-velocity.c
	drivers/net/wireless/iwlwifi/iwl-agn.c
2010-04-06 23:53:30 -07:00
Eric Dumazet 1f8438a853 icmp: Account for ICMP out errors
When ip_append() fails because of socket limit or memory shortage,
increment ICMP_MIB_OUTERRORS counter, so that "netstat -s" can report
these errors.

LANG=C netstat -s | grep "ICMP messages failed"
    0 ICMP messages failed

For IPV6, implement ICMP6_MIB_OUTERRORS counter as well.

# grep Icmp6OutErrors /proc/net/dev_snmp6/*
/proc/net/dev_snmp6/eth0:Icmp6OutErrors                   	0
/proc/net/dev_snmp6/lo:Icmp6OutErrors                   	0

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03 15:09:04 -07:00
Jiri Pirko 22bedad3ce net: convert multicast list to list_head
Converts the list and the core manipulating with it to be the same as uc_list.

+uses two functions for adding/removing mc address (normal and "global"
 variant) instead of a function parameter.
+removes dev_mcast.c completely.
+exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for
 manipulation with lists on a sandbox (used in bonding and 80211 drivers)

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03 14:22:15 -07:00
YOSHIFUJI Hideaki / 吉藤英明 02cdce53f3 ipv6 fib: Use "Sweezle" to optimize addr_bit_test().
addr_bit_test() is used in various places in IPv6 routing table
subsystem.  It checks if the given fn_bit is set,
where fn_bit counts bits from MSB in words in network-order.

 fn_bit        :   0 .... 31 32 .... 64 65 .... 95 96 ....127

fn_bit >> 5 gives offset of word, and (~fn_bit & 0x1f) gives
count from LSB in the network-endian word in question.

 fn_bit >> 5   :       0          1          2          3
 ~fn_bit & 0x1f:  31 ....  0 31 ....  0 31 ....  0 31 ....  0

Thus, the mask was generated as htonl(1 << (~fn_bit & 0x1f)).
This can be optimized by "sweezle" (See include/asm-generic/bitops/le.h).

In little-endian,
  htonl(1 << bit) = 1 << (bit ^ BITOP_BE32_SWIZZLE)
where
  BITOP_BE32_SWIZZLE is (0x1f & ~7)
So,
  htonl(1 << (~fn_bit & 0x1f)) = 1 << ((~fn_bit & 0x1f) ^ (0x1f & ~7))
                               = 1 << ((~fn_bit ^ ~7) & 0x1f)
                               = 1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)

In big-endian, BITOP_BE32_SWIZZLE is equal to 0.
  1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)
                               = 1 << ((~fn_bit) & 0x1f)
                               = htonl(1 << (~fn_bit & 0x1f))

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30 23:28:47 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
YOSHIFUJI Hideaki / 吉藤英明 54c1a859ef ipv6: Don't drop cache route entry unless timer actually expired.
This is ipv6 variant of the commit 5e016cbf6.. ("ipv4: Don't drop
redirected route cache entry unless PTMU actually expired")
by Guenter Roeck <guenter.roeck@ericsson.com>.

Remove cache route entry in ipv6_negative_advice() only if
the timer is expired.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-28 19:34:26 -07:00
Nicolas Dichtel 7438189baa net: ipmr/ip6mr: prevent out-of-bounds vif_table access
When cache is unresolved, c->mf[6]c_parent is set to 65535 and
minvif, maxvif are not initialized, hence we must avoid to
parse IIF and OIF.
A second problem can happen when the user dumps a cache entry
where a VIF, that was referenced at creation time, has been
removed.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-27 08:33:21 -07:00
Patrick McHardy 4b97efdf39 net: fix netlink address dumping in IPv4/IPv6
When a dump is interrupted at the last device in a hash chain and
then continued, "idx" won't get incremented past s_idx, so s_ip_idx
is not reset when moving on to the next device. This means of all
following devices only the last n - s_ip_idx addresses are dumped.

Tested-by: Pawel Staszewski <pstaszewski@itcare.pl>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-03-26 20:27:49 -07:00
David S. Miller b79d1d54cf ipv6: Fix result generation in ipv6_get_ifaddr().
Finishing naturally from hlist_for_each_entry(x, ...) does not result
in 'x' being NULL.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-25 21:39:21 -07:00
David S. Miller b54c9b98bb ipv6: Preserve pervious behavior in ipv6_link_dev_addr().
Use list_add_tail() to get the behavior we had before
the list_head conversion for ipv6 address lists.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-25 21:25:30 -07:00
David S. Miller 80bb3a00fa Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6 2010-03-25 11:48:58 -07:00
Jan Engelhardt d6b00a5345 netfilter: xtables: change targets to return error code
Part of the transition of done by this semantic patch:
// <smpl>
@ rule1 @
struct xt_target ops;
identifier check;
@@
 ops.checkentry = check;

@@
identifier rule1.check;
@@
 check(...) { <...
-return true;
+return 0;
 ...> }

@@
identifier rule1.check;
@@
 check(...) { <...
-return false;
+return -EINVAL;
 ...> }
// </smpl>

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-03-25 16:55:49 +01:00
Jan Engelhardt bd414ee605 netfilter: xtables: change matches to return error code
The following semantic patch does part of the transformation:
// <smpl>
@ rule1 @
struct xt_match ops;
identifier check;
@@
 ops.checkentry = check;

@@
identifier rule1.check;
@@
 check(...) { <...
-return true;
+return 0;
 ...> }

@@
identifier rule1.check;
@@
 check(...) { <...
-return false;
+return -EINVAL;
 ...> }
// </smpl>

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-03-25 16:55:24 +01:00
Jan Engelhardt 135367b8f6 netfilter: xtables: change xt_target.checkentry return type
Restore function signatures from bool to int so that we can report
memory allocation failures or similar using -ENOMEM rather than
always having to pass -EINVAL back.

// <smpl>
@@
type bool;
identifier check, par;
@@
-bool check
+int check
 (struct xt_tgchk_param *par) { ... }
// </smpl>

Minus the change it does to xt_ct_find_proto.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-03-25 16:04:33 +01:00
Jan Engelhardt b0f38452ff netfilter: xtables: change xt_match.checkentry return type
Restore function signatures from bool to int so that we can report
memory allocation failures or similar using -ENOMEM rather than
always having to pass -EINVAL back.

This semantic patch may not be too precise (checking for functions
that use xt_mtchk_param rather than functions referenced by
xt_match.checkentry), but reviewed, it produced the intended result.

// <smpl>
@@
type bool;
identifier check, par;
@@
-bool check
+int check
 (struct xt_mtchk_param *par) { ... }
// </smpl>

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-03-25 16:03:13 +01:00
Jan Engelhardt b2e0b385d7 netfilter: ipv6: use NFPROTO values for NF_HOOK invocation
The semantic patch that was used:
// <smpl>
@@
@@
(NF_HOOK
|NF_HOOK_THRESH
|nf_hook
)(
-PF_INET6,
+NFPROTO_IPV6,
 ...)
// </smpl>

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-03-25 16:00:49 +01:00
Jan Engelhardt fd0ec0e621 netfilter: xtables: consolidate code into xt_request_find_match
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-03-25 15:02:19 +01:00
Jan Engelhardt d2a7b6bad2 netfilter: xtables: make use of xt_request_find_target
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-03-25 15:02:19 +01:00
Jan Engelhardt ff67e4e42b netfilter: xt extensions: use pr_<level> (2)
Supplement to 1159683ef4.

Downgrade the log level to INFO for most checkentry messages as they
are, IMO, just an extra information to the -EINVAL code that is
returned as part of a parameter "constraint violation". Leave errors
to real errors, such as being unable to create a LED trigger.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-03-25 15:00:04 +01:00
Jozsef Kadlecsik 9c13886665 netfilter: ip6table_raw: fix table priority
The order of the IPv6 raw table is currently reversed, that makes impossible
to use the NOTRACK target in IPv6: for example if someone enters

ip6tables -t raw -A PREROUTING -p tcp --dport 80 -j NOTRACK

and if we receive fragmented packets then the first fragment will be
untracked and thus skip nf_ct_frag6_gather (and conntrack), while all
subsequent fragments enter nf_ct_frag6_gather and reassembly will never
successfully be finished.

Singed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-03-25 11:17:26 +01:00
Frans Pop b138338056 net: remove trailing space in messages
Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-24 14:01:54 -07:00
David S. Miller 3e81c6da39 ipv6: Fix bug in ipv6_chk_same_addr().
hlist_for_each_entry(p...) will not necessarily initialize 'p'
to anything if the hlist is empty.  GCC notices this and emits
a warning.

Just return true explicitly when we hit a match, and return
false is we fall out of the loop without one.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 16:18:00 -07:00
YOSHIFUJI Hideaki b2db756449 ipv6: Reduce timer events for addrconf_verify().
This patch reduces timer events while keeping accuracy by rounding
our timer and/or batching several address validations in addrconf_verify().

addrconf_verify() is called at earliest timeout among interface addresses'
timeouts, but at maximum ADDR_CHECK_FREQUENCY (120 secs).

In most cases, all of timeouts of interface addresses are long enough
(e.g. several hours or days vs 2 minutes), this timer is usually called
every ADDR_CHECK_FREQUENCY, and it is okay to be lazy.
(Note this timer could be eliminated if all code paths which modifies
variables related to timeouts call us manually, but it is another story.)

However, in other least but important cases, we try keeping accuracy.

When the real interface address timeout is coming, and the timeout
is just before the rounded timeout, we accept some error.

When a timeout has been reached, we also try batching other several
events in very near future.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 16:11:12 -07:00
stephen hemminger 88949cf484 IPv6: addrconf cleanup addrconf_verify
The variable regen_advance is only used in the privacy case.
Move it to simplify code and eliminate ifdef's

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 16:09:11 -07:00
Stephen Hemminger e21e8467d3 addrconf: checkpatch fixes
Fix some of the checkpatch complaints.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 16:09:01 -07:00
Stephen Hemminger bcdd553fd3 IPv6: addrconf cleanups
Some minor stuff, reformat comments and add whitespace for clarity

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 16:08:18 -07:00
stephen hemminger 502a2ffd73 ipv6: convert idev_list to list macros
Convert to list macro's for the list of addresses per interface
in IPv6.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 15:45:09 -07:00