Tronsmart Vega S95 Pro, Meta and Telos TV boxes.
- Add new DTS to enable support for the boards
- Add documentation for compatibles and vendor prefix
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=KmAy
-----END PGP SIGNATURE-----
Merge tag 'for-v4.6/gxbb-dt' of https://github.com/carlocaione/linux-meson into next/dt64
This series adds initial support for the Amlogic S905 based
Tronsmart Vega S95 Pro, Meta and Telos TV boxes.
- Add new DTS to enable support for the boards
- Add documentation for compatibles and vendor prefix
* tag 'for-v4.6/gxbb-dt' of https://github.com/carlocaione/linux-meson:
ARM64: dts: amlogic: Add Tronsmart Vega S95 configs
Documentation: devicetree: amlogic: Document Tronsmart Vega S95 boards
ARM64: dts: Prepare configs for Amlogic Meson GXBaby
Documentation: devicetree: amlogic: Document Meson GXBaby
devicetree: bindings: Add vendor prefix for Tronsmart
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Remove separate ARCH_EXYNOS7 symbol and consolidate it into
one ARCH_EXYNOS.
This depends on clk tree: removal of last presence of ARCH_EXYNOS7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=XcED
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc64-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/arm64
Samsung Exynos ARM64 improvements for v4.6:
1. Remove separate ARCH_EXYNOS7 symbol and consolidate it into
one ARCH_EXYNOS.
This depends on clk tree: removal of last presence of ARCH_EXYNOS7.
* tag 'samsung-soc64-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS
clk: samsung: Don't build ARMv8 clock drivers on ARMv7
clk: samsung: Enable COMPILE_TEST for Samsung clocks
clk: Move vendor's Kconfig into CCF menu section
clk: mediatek: Fix memory leak on clock init fail
clk: move the common clock's to_clk_*(_hw) macros to clk-provider.h
clk: xgene: Remove return from void function
clk: xgene: Add SoC and PMD PLL clocks with v2 hardware
Documentation: Update APM X-Gene clock binding for v2 hardware
clk: s2mps11: remove redundant code
clk: s2mps11: remove redundant static variables declaration
clk: s2mps11: allocate only one structure for clock init
clk: s2mps11: merge two for loops in one
clk-divider: make sure read-only dividers do not write to their register
clk: tango4: rename ARCH_TANGOX to ARCH_TANGO
clk: scpi: Fix checking return value of platform_device_register_simple()
clk: mvebu: Mark ioremapped memory as __iomem
Signed-off-by: Olof Johansson <olof@lixom.net>
Add support for the Armada 7K and 8K SoCs and the Armada 8040 DB board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlbQX0wACgkQCwYYjhRyO9V9nwCgqk3LOUVjtyjGxd4YU8iHzEBe
B+oAoKMMiTTb/yqcwMdN+l1B5RMOxW4o
=fs9N
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.6-2' of git://git.infradead.org/linux-mvebu into next/dt64
mvebu dt64 for 4.6 (part 2)
Add support for the Armada 7K and 8K SoCs and the Armada 8040 DB board
* tag 'mvebu-dt64-4.6-2' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: re-order Device Tree nodes for Armada AP806
arm64: dts: marvell: update Armada AP806 clock description
arm64: dts: marvell: add Device Tree files for Armada 7K/8K
Signed-off-by: Olof Johansson <olof@lixom.net>
Hinawa [https://github.com/takaswie/libhinawa/] is a library for
access to IEEE 1394 devices. As a gobject introspection library, it
facilitates writing applications in high-level programming languages.
Besides generic I/O via /dev/fw* (firewire-cdev ABI), it also supports
control of IEEE 1394 audio hardware via ALSA hwdep ABIs which are
provided by sound/firewire drivers.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Modify the documentation to match the actual parameter as implemented in
kernel/module.c:273.
Signed-off-by: James Johnston <johnstonj.public@codenest.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Renesas sound driver user needs to read its datasheet when create DT.
But it is difficult to understand, because it has many modules
(SRC/CTU/MIX/DVC/SSIU/SSI/AudioDMAC/AudioDMACperiperi),
and many features (Asynchronous/Synchronous mode on SRC, CTU matrix,
DVC volume settings feature, Multi-SSI/TDM-SSI, etc).
This patch adds simplified explanation to help setting/understanding.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now the noltlbs kernel parameter is also applicable to PPC8xx
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
The cavium,pci-thunder-ecam devices are exactly ECAM-based PCI root
complexes. These root complexes (loosely referred to as ECAM units in the
hardware manuals) are used to access the Thunder on-chip devices. They
are special in that all the BARs on devices behind these root complexes are
at fixed addresses.
Add a driver for these devices that synthesizes Enhanced Allocation (EA)
capability entries for each BAR.
Since this EA synthesis is needed for exactly two chip models, we can hard-
code some assumptions about the device topology and the layout of the
config space of specific DEVFNs in the driver.
[bhelgaas: changelog, whitespace]
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
The root complexes used to access off-chip PCIe devices (called PEM units
in the hardware manuals) on some Cavium ThunderX processors require quirky
access methods for the config space of the PCIe bridge.
Add a driver to provide these config space accessor functions. Use the
pci-host-common code to configure the PCI machinery.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Two more fixes for 4.5:
- One is a fix for OMAP that is urgently needed to avoid DRA7xx chips from
premature aging, by always keeping the Ethernet clock enabled.
- The other solves a I/O memory layout issue on Armada, where SROM and PCI
memory windows were conflicting in some configurations.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=/uWT
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Two more fixes for 4.5:
- One is a fix for OMAP that is urgently needed to avoid DRA7xx chips
from premature aging, by always keeping the Ethernet clock enabled.
- The other solves a I/O memory layout issue on Armada, where SROM
and PCI memory windows were conflicting in some configurations"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: mvebu: fix overlap of Crypto SRAM with PCIe memory window
ARM: dts: dra7: do not gate cpsw clock due to errata i877
ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property
The document in the kernel sources is yet another palce where the
documentation would need to be updated, while it is not the primary
source. We actively maintain the wiki pages.
Signed-off-by: David Sterba <dsterba@suse.com>
Based on the Allwinner A64 user manual and on the previous sunxi
pinctrl drivers this introduces the pin multiplex assignments for
the ARMv8 Allwinner A64 SoC.
Port A is apparently used for the fixed function DRAM controller, so
the ports start at B here (the manual mentions "n from 1 to 7", so
not starting at 0).
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
TCMU_MAILBOX_FLAG_CAP_OOOC was introduced, and userspace can check the flag
for out-of-order completion capability support.
Also update the document on how to use the feature.
Signed-off-by: Sheng Yang <sheng@yasker.org>
Reviewed-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This add the necessary binding documentation for mailbox
found on RK3368 SoC.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The Qualcomm Technologies HIDMA device has been designed to support
virtualization technology. The driver has been divided into two to follow
the hardware design.
1. HIDMA Management driver
2. HIDMA Channel driver
Each HIDMA HW consists of multiple channels. These channels share some set
of common parameters. These parameters are initialized by the management
driver during power up. Same management driver is used for monitoring the
execution of the channels. Management driver can change the performance
behavior dynamically such as bandwidth allocation and prioritization.
The management driver is executed in host context and is the main
management entity for all channels provided by the device.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Add documentation for the Qualcomm Technologies HIDMA binding.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Add a per port sysfs paramter to toggle cc_prescan/Fast ECN Detection and
remove the Kconfig option which was previously used to control this.
While am updating the sysfs documentation, fix the name of CCMgtA.
Reviewed-by: Arthur Kepner <arthur.kepner@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Vennila Megavannan <vennila.megavannan@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2D sensors have several parameter which can be set in the platform data.
This patch adds support for getting those values from devicetree.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add devicetree binding for I2C devices and add bindings for optional
parameters in the function drivers. Parameters for function drivers are
defined in child nodes for each of the functions.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
smq seems to be performing better than the old mq policy in all
situations, as well as using a quarter of the memory.
Make 'mq' an alias for 'smq' when choosing a cache policy. The tunables
that were present for the old mq are faked, and have no effect. mq
should be considered deprecated now.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This adds the binding documentation for the MediaTek Ethernet
controller.
Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Yes, all of these are needed. :) This is admittedly a bit odd, but
kvm-unit-tests access.flat tests this if you run it with "-cpu host"
and of course ept=0.
KVM runs the guest with CR0.WP=1, so it must handle supervisor writes
specially when pte.u=1/pte.w=0/CR0.WP=0. Such writes cause a fault
when U=1 and W=0 in the SPTE, but they must succeed because CR0.WP=0.
When KVM gets the fault, it sets U=0 and W=1 in the shadow PTE and
restarts execution. This will still cause a user write to fault, while
supervisor writes will succeed. User reads will fault spuriously now,
and KVM will then flip U and W again in the SPTE (U=1, W=0). User reads
will be enabled and supervisor writes disabled, going back to the
originary situation where supervisor writes fault spuriously.
When SMEP is in effect, however, U=0 will enable kernel execution of
this page. To avoid this, KVM also sets NX=1 in the shadow PTE together
with U=0. If the guest has not enabled NX, the result is a continuous
stream of page faults due to the NX bit being reserved.
The fix is to force EFER.NX=1 even if the CPU is taking care of the EFER
switch. (All machines with SMEP have the CPU_LOAD_IA32_EFER vm-entry
control, so they do not use user-return notifiers for EFER---if they did,
EFER.NX would be forced to the same value as the host).
There is another bug in the reserved bit check, which I've split to a
separate patch for easier application to stable kernels.
Cc: stable@vger.kernel.org
Cc: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Fixes: f6577a5fa1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The previous 'o' is in conflict and not very orderly assigned.
We want to select an ioctl() major that does not conflict with
the existining ones.
Add the new reserved major (0xB4) to Documentation/ioctl/ioctl-number.txt
Fixes: 3c702e9987 ("gpio: add a userspace chardev ABI for GPIOs")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch fix spelling typos found in Documentation/filesystems/nfs
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Some HP laptops seem to have invalid 64 bit FADT X_PM* addresses
which are causing various boot issues. In these cases, it would
be useful to force ACPI to use the valid legacy 32 bit equivalent
PM addresses. Add a acpi_force_32bit_fadt_addr to set the ACPICA
acpi_gbl_use32_bit_fadt_addresses to TRUE to force this override.
Link: https://bugs.launchpad.net/bugs/1529381
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some minor typos:
- make is unbindable -> make it unbindable
- a underlying -> an underlying
- different version -> different versions
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Fixed subtitles style, aligned them with their header.
Signed-off-by: Philippe Loctaux <phil@philippeloctaux.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Force the DRA7xx Ethernet internal clock source to stay enabled
per TI erratum i877:
http://www.ti.com/lit/er/sprz429h/sprz429h.pdf
Otherwise, if the Ethernet internal clock source is disabled, the
chip will age prematurely, and the RGMII I/O timing will soon
fail to meet the delay time and skew specifications for 1000Mbps
Ethernet.
This fix should go in as soon as possible.
Basic build, boot, and PM test results are available here:
http://www.pwsan.com/omap/testlogs/omap-critical-fixes-for-v4.5-rc/20160307014209/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=kJw8
-----END PGP SIGNATURE-----
Merge tag 'for-v4.5-rc/omap-critical-fixes-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes
ARM: OMAP2+: critical DRA7xx fix for v4.5-rc
Force the DRA7xx Ethernet internal clock source to stay enabled
per TI erratum i877:
http://www.ti.com/lit/er/sprz429h/sprz429h.pdf
Otherwise, if the Ethernet internal clock source is disabled, the
chip will age prematurely, and the RGMII I/O timing will soon
fail to meet the delay time and skew specifications for 1000Mbps
Ethernet.
This fix should go in as soon as possible.
Basic build, boot, and PM test results are available here:
http://www.pwsan.com/omap/testlogs/omap-critical-fixes-for-v4.5-rc/20160307014209/
* tag 'for-v4.5-rc/omap-critical-fixes-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending:
ARM: dts: dra7: do not gate cpsw clock due to errata i877
ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property
Signed-off-by: Olof Johansson <olof@lixom.net>
Add details of the interface devm_thermal_zone_of_sensor_register()
and devm_thermal_zone_of_sensor_unregister() in the
<thermal/sysfs-api.txt>.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Add details of the interface thermal_zone_of_sensor_register() and
thermal_zone_of_sensor_unregister() in the thermal/sysfs-api.txt.
The details describes the functionality and parameter which
are passed to these interfaces.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The new flash.c file contains the logic to flash a new image on the
adapter, through a hcall. It is an iterative process, with chunks of
data of 1M at a time. There are also 2 phases: write and verify. The
flash operation itself is driven from a user-land tool.
Once flashing is successful, an rtas call is made to update the device
tree with the new properties values for the adapter and the AFU(s)
Add a new char device for the adapter, so that the flash tool can
access the card, even if there is no valid AFU on it.
Co-authored-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Filter out a few adapter parameters which don't make sense in a guest.
Document the changes.
Co-authored-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
- VHE support so that we can run the kernel at EL2 on ARMv8.1 systems
- PMU support for guests
- 32bit world switch rewritten in C
- Various optimizations to the vgic save/restore code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rpvb
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/ARM updates for 4.6
- VHE support so that we can run the kernel at EL2 on ARMv8.1 systems
- PMU support for guests
- 32bit world switch rewritten in C
- Various optimizations to the vgic save/restore code
Conflicts:
include/uapi/linux/kvm.h
In the add-on file for the GIC dealing with the RealView family
we currently only handle the PB11MPCore, let's extend this to
manage the RealView EB ARM11MPCore as well. The Revision B of the
ARM11MPCore core tile is a bit special and needs special handling
as it moves a system control register around at random.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: devicetree@vger.kernel.org
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Following the addition of the Alpine MSIX driver, this patch adds the
corresponding bindings documentation.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This patch adds support for the mcp23s18 which is very similar to
the mcp23s17. A couple of control bits are not the same.
Notable IOCON_HAEN (s17 only) & IOCON_INTCC. Which can be ignored.
Patch changes the following:
- Add mcp23s18 types.
- Always set mirror bit if the dts defines mcp23s18. regardless of type.
Mirror bit is ignored on 8 bit devices anyway.
- In mcp23s08_probe use chip.ngpio instead of logic based on type
to determine number of gpio lins to increment by. This is set
appropiately by the call to mcp23s08_probe_one.
- Add mcp23s18 to device tree documentation.
- Remove statement that irqs don't work for spi. They do.
Tested with mcp23s18.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The altr,interrupt-trigger property is not used by the driver.
Instead, altr,interrupt-type is used by the driver and the driver
does not probe if this property is not specified. Therefore, it
is expected that there are no users of the -trigger property in
the wild and that this is a typo in the documentation for the
altera-pio controller. This patch fixes the typo.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tien Hock Loh <thloh@altera.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Create a driver to support the hardware monitoring chip present in
the Zyxel NSA320 and some of the other Zyxel NAS devices.
The driver reads fan speed and temperature from a suitably
pre-programmed MCU on the device.
Signed-off-by: Adam Baker <linux@baker-net.org.uk>
[groeck: Dropped .owner field initialization]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The Exynos Thermal Management Unit binding says that the vtmu-supply
is optional but is listed in the required properties section. Add an
optional properties section and move the regulator property there.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Document the number of configurable temperature thresholds (for
trip-points in interrupt-driven mode).
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Commit 488c7455d7 ("thermal: exynos: Add the support for Exynos5433
TMU") added new compatible but forgot to update documentation.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Add device tree support for the I2C and SPI variant of AD7879(-1).
This allows to specify the touchscreen controller as a I2C client
node or SPI slave device. Most of the options available in platform
data are also available as device tree properties, the only exception
being GPIO capabilities, which can not be activated through device
tree currently.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Several cases of overlapping changes, as well as one instance
(vxlan) of a bug fix in 'net' overlapping with code movement
in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Patch based on a previous series by Shashank Sharma.
This introduces optional properties to enable color correction at the
pipe level. It relies on 3 transformations applied to every pixels
displayed. First a lookup into a degamma table, then a multiplication
of the rgb components by a 3x3 matrix and finally another lookup into
a gamma table.
The following properties can be added to a pipe :
- DEGAMMA_LUT : blob containing degamma LUT
- DEGAMMA_LUT_SIZE : number of elements in DEGAMMA_LUT
- CTM : transformation matrix applied after the degamma LUT
- GAMMA_LUT : blob containing gamma LUT
- GAMMA_LUT_SIZE : number of elements in GAMMA_LUT
DEGAMMA_LUT_SIZE and GAMMA_LUT_SIZE are read only properties, set by
the driver to tell userspace applications what sizes should be the
lookup tables in DEGAMMA_LUT and GAMMA_LUT.
A helper is also provided so legacy gamma correction is redirected
through these new properties.
v2: Register LUT size properties as range
v3: Fix round in drm_color_lut_get_value() helper
More docs on how degamma/gamma properties are used
v4: Update contributors
v5: Rename CTM_MATRIX property to CTM (Doh!)
Add legacy gamma_set atomic helper
Describe CTM/LUT acronyms in the kernel doc
v6: Fix missing blob unref in drm_atomic_helper_crtc_reset
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Kumar, Kiran S <kiran.s.kumar@intel.com>
Signed-off-by: Kausal Malladi <kausalmalladi@gmail.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Rob Bradford <robert.bradford@intel.com>
[danvet: CrOS maintainers are also happy with the userspacde side:
https://codereview.chromium.org/1182063002/ ]
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1456506302-640-4-git-send-email-lionel.g.landwerlin@intel.com
Define a binding for the hardware monitoring chip present in the Zyxel
NSA-320 and some of the other Zyxel NAS devices.
Signed-off-by: Adam Baker <linux@baker-net.org.uk>
Acked-by: Rob Herring <robh@kernel.org>
[groeck: Fixed whitespace error]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Armada-3700's uart is a simple serial port, which doesn't
support. Configuring the modem control lines. The uart port has a 32
bytes Tx FIFO and a 64 bytes Rx FIFO
The uart driver implements the uart core operations. It also support the
system (early) console based on Armada-3700's serial port.
Known Issue:
The uart driver currently doesn't support clock programming, which means
the baud-rate stays with the default value configured by the bootloader
at boot time
[gregory.clement@free-electrons.com: Rewrite many part which are too long
to enumerate]
Signed-off-by: Wilson Ding <dingwei@marvell.com>
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Logic has been changed in kernel 3.4 by commit e9aba5158a
("tty: rework pty count limiting") but still not documented.
Sysctl kernel.pty.max works as global limit, kernel.pty.reserve ptys
are reserved for initial devpts instance (mounted without "newinstance").
Per-instance limit also could be set by mount option "max=%d".
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable support for registering this device using the device tree.
Device tree node example for registering Goldfish TTY device :
goldfish_tty@1f004000 {
interrupts = <0xc>;
reg = <0x1f004000 0x1000>;
compatible = "google,goldfish-tty";
};
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Jin Qian <jinqian@android.com>
Signed-off-by: Alan <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add optional properties for QSPI:
big-endian
if the register is big endian on this platform.
Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Han xu <han.xu@nxp.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
new compatible string: "fsl,ls2080a-qspi".
Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Han xu <han.xu@nxp.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Use "tronsmart,vega-s95" as well as
"tronsmart,vega-s95-pro",
"tronsmart,vega-s95-meta" and
"tronsmart,vega-s95-telos" compatible strings.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Use "amlogic,meson-gxbb" compatible string.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Tronsmart is a China based company building consumer electronic
devices.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Introduce a dt property, ti,no-idle, that prevents an IP to idle at any
point. This is to handle Errata i877, which tells that GMAC clocks
cannot be disabled.
Acked-by: Roger Quadros <rogerq@ti.com>
Tested-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Update devicetree documention for lpc1850-scu with the new
nxp,gpio-pin-interrupt property.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
is actually "active high". Thanks for Troy Kisky for pointing
that out.
Since the patch is in linux-next, this patch is incremental and doesn't
replace the original patch.
Signed-off-by: Bernhard Walle <bernhard@bwalle.de>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the current NULL-terminated array of default groups with a linked
list. This gets rid of lots of nasty code to size and/or dynamically
allocate the array.
While we're at it also provide a conveniant helper to remove the default
groups.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Felipe Balbi <balbi@kernel.org> [drivers/usb/gadget]
Acked-by: Joel Becker <jlbec@evilplan.org>
Acked-by: Nicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
ath.git patches for 4.6. Major changes:
ath10k
* dt: add bindings for ipq4019 wifi block
* start adding support for qca4019 chip
ath9k
* add device ID for Toshiba WLM-20U2/GN-1080
* allow more than one interface on DFS channels
The icn, act2000 and pcbit drivers are all for very old hardware,
and it is highly unlikely that anyone is actually still using them
on modern kernels, if at all.
All three drivers apparently are for hardware that predates PCI
being the common connector, as they are ISA-only and active
PCI ISDN cards were widely available in the 1990s.
Looking through the git logs, it I cannot find any indication of a
patch to any of these drivers that has been tested on real hardware,
only cleanups or global API changes.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lhV9
-----END PGP SIGNATURE-----
Merge tag 'media/v4.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- some last time changes before we stablize the new entity function
integer numbers at uAPI
- probe: fix erroneous return value on i2c/adp1653 driver
- fix tx 5v detect regression on adv7604 driver
- fix missing unlock on error in vpfe_prepare_pipeline() on
davinci_vpfe driver
* tag 'media/v4.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] media: Sanitise the reserved fields of the G_TOPOLOGY IOCTL arguments
[media] media.h: postpone connectors entities
[media] media.h: use hex values for range offsets, move connectors base up.
[media] adv7604: fix tx 5v detect regression
[media] media.h: get rid of MEDIA_ENT_F_CONN_TEST
[media] [for,v4.5] media.h: increase the spacing between function ranges
[media] media: i2c/adp1653: probe: fix erroneous return value
[media] media: davinci_vpfe: fix missing unlock on error in vpfe_prepare_pipeline()
Although most of USB devices are hot-plug's, there are still some devices
are hard wired on the board, eg, for HSIC and SSIC interface USB devices.
If these kinds of USB devices are multiple functions, and they can supply
other interfaces like i2c, gpios for other devices, we may need to
describe these at device tree.
In this commit, it uses "reg" in dts as physical port number to match
the phyiscal port number decided by USB core, if they are the same,
then the device node is for the device we are creating for USB core.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The new USBDEVFS_DROP_PRIVILEGES ioctl allows a process to voluntarily
relinquish the ability to issue other ioctls that may interfere with
other processes and drivers that have claimed an interface on the
device.
This commit also includes a simple utility to be able to test the
ioctl, located at Documentation/usb/usbdevfs-drop-permissions.c
Example (with qemu-kvm's input device):
$ lsusb
...
Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd
$ usb-devices
...
C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=02 Driver=usbhid
$ sudo ./usbdevfs-drop-permissions /dev/bus/usb/001/002
OK: privileges dropped!
Available options:
[0] Exit now
[1] Reset device. Should fail if device is in use
[2] Claim 4 interfaces. Should succeed where not in use
[3] Narrow interface permission mask
Which option shall I run?: 1
ERROR: USBDEVFS_RESET failed! (1 - Operation not permitted)
Which test shall I run next?: 2
ERROR claiming if 0 (1 - Operation not permitted)
ERROR claiming if 1 (1 - Operation not permitted)
ERROR claiming if 2 (1 - Operation not permitted)
ERROR claiming if 3 (1 - Operation not permitted)
Which test shall I run next?: 0
After unbinding usbhid:
$ usb-devices
...
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=02 Driver=(none)
$ sudo ./usbdevfs-drop-permissions /dev/bus/usb/001/002
...
Which option shall I run?: 2
OK: claimed if 0
ERROR claiming if 1 (1 - Operation not permitted)
ERROR claiming if 2 (1 - Operation not permitted)
ERROR claiming if 3 (1 - Operation not permitted)
Which test shall I run next?: 1
OK: USBDEVFS_RESET succeeded
Which test shall I run next?: 0
After unbinding usbhid and restricting the mask:
$ sudo ./usbdevfs-drop-permissions /dev/bus/usb/001/002
...
Which option shall I run?: 3
Insert new mask: 0
OK: privileges dropped!
Which test shall I run next?: 2
ERROR claiming if 0 (1 - Operation not permitted)
ERROR claiming if 1 (1 - Operation not permitted)
ERROR claiming if 2 (1 - Operation not permitted)
ERROR claiming if 3 (1 - Operation not permitted)
Signed-off-by: Reilly Grant <reillyg@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Emilio López <emilio.lopez@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ADM1278 is mostly compatible to other chips of the same series.
Besides the usual difference in coefficients, it supports
a temperature sensor, and it can measure both input and output
voltage at the same time.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This patch adds support for the Murata NCP15XH103 thermistor series.
Signed-off-by: Joseph McNally <jmcna06@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This patch fix typos found in files within Documentation/hwmon.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Change iio_hwmon nodes to use hypen in node names instead of
underscore.
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This adds support for the Linear Technology LTC2990 I2C System Monitor.
The LTC2990 supports a combination of voltage, current and temperature
monitoring. This driver currently only supports reading two currents
by measuring two differential voltages across series resistors, in
addition to the Vcc supply voltage and internal temperature.
This is sufficient to support the Topic Miami SOM which uses this chip
to monitor the currents flowing into the FPGA and the CPU parts.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Switch attribute wakeup_data from binary to a text attribute.
This makes it easier to handle in userspace and allows to
use the output of tools like mode2 almost as is to set a
wakeup sequence.
Changing to a text format and values in microseconds also
makes the userspace interface independent of the setting of
SAMPLE_PERIOD in the driver.
In addition document the new sysfs attribute in
Documentation/ABI/testing/sysfs-class-rc-nuvoton.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The FMan contains internal PHY devices used for SGMII connections
to external PHYs. When these PHYs are in use a reference is needed
for both the external PHY and the internal one. For the external
PHY phy-handle provides the reference. For the internal PHY a new
handle is required.
In dTSEC, the internal PHY is a TBI (Ten Bit Interface) PHY,
the handle used will be tbi-handle.
In mEMAC, the internal PHY is a PCS (Physical Coding Sublayer) PHY,
the handle used will be pcsphy-handle.
Signed-off-by: Igal Liberman <igal.liberman@freescale.com>
Signed-off-by: Scott Wood <oss@buserror.net>
RCPM is the Run Control and Power Management module performs all
device-level tasks associated with device run control and power
management.
Add this for freescale powerpc platform and layerscape platform.
Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com>
Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
[scottwood: s/pointer/phandle and "disabled" status from example]
Signed-off-by: Scott Wood <oss@buserror.net>
Currently the binding is only made of the compatible string.
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound device has CTU (= Channel Transfer Unit), and
sound card needs its support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
this patch add compatible for rk3366/rk3368/rk3399 spdif,
these three spdifs share the same type.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This is almost all under drivers/usb/dwc2/. Many
changes to the host side implementation of dwc2 have
been done by Douglas Anderson.
We also have USB 3.1 support added to the Gadget
Framework and, because of that work, dwc3 got
support to Synopsys new DWC_usb31 IP core.
Other than these 2 important series, we also have
the usual collection of non-critical fixes,
Documentation updates, and minor changes all over
the place.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vivP
-----END PGP SIGNATURE-----
Merge tag 'usb-for-v4.6' of http://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
usb changes for v4.6 merge window
This is almost all under drivers/usb/dwc2/. Many
changes to the host side implementation of dwc2 have
been done by Douglas Anderson.
We also have USB 3.1 support added to the Gadget
Framework and, because of that work, dwc3 got
support to Synopsys new DWC_usb31 IP core.
Other than these 2 important series, we also have
the usual collection of non-critical fixes,
Documentation updates, and minor changes all over
the place.
Add DT binding documentation for lpc1850-creg-clk driver.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Bring in updates to roraty encoder driver switching it away from legacy
platform data and over to generic device properties and adding support
for encoders using more than 2 GPIOs.
The sbsa-gwdt.txt documentation in devicetree/bindings/watchdog is for
introducing SBSA(Server Base System Architecture) Generic Watchdog
device node info into FDT.
Also add sbsa-gwdt introduction in watchdog-parameters.txt
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Add support for Lantiq ARX and XRX SoC families to the dwc2 driver.
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Update HNP test procedure as HNP polling is supported.
Acked-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Document DT binding for Hisilicon Hi6220 mailbox driver.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Underscores are usually forbidden in the compatible strings. So lets
remove it before the first users of this is seen.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The usbip_protocol.txt, a document which describes usbip's
inner workings is currently located in the projects source
directory (drivers/usb/usbip/...). This patch moves it to
Documentation/usb.
This discussion was brought up by Guy Harris [0] during the
review of the USBIP dissector I wrote. For anyone interested:
support is available with the latest wireshark master/dev tree.
Simply select a packet from the usbip's tcp-stream you are
intrested on and select the USBIP as the protocol in the
"Decode As" dialog box [1].
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
[0] <https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=12127#c2>
[1] <https://www.wireshark.org/docs/wsug_html_chunked/ChCustProtocolDissectionSection.html#ChAdvDecodeAs>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add fallback compatibility strings for R-Car Gen2 and Gen3.
This is in keeping with the fallback scheme being adopted wherever
appropriate for drivers for Renesas SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Big ticket items are hdmi support for 8996 (aka snapdragon 820), and
adreno 430 support. Also one more small uapi addition to support
timestamp queries.
* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (29 commits)
drm/msm: rename hdmi symbols
drm/msm/adreno: remove duplicate adreno_hw_init() call
drm/msm: add timestamp param
drm/msm: fix small typo
drm/msm: grab struct_mutex after allocating submit
drm/msm: reject submit ioctl if no gpu
drm/msm/adreno: print details in case of a protect fault interrupt
drm/msm/adreno: get CP_RPTR from register instead of shadow memory
drm/msm/adreno: add adreno430 power control
drm/msm/adreno: support for adreno 430.
drm/msm: update generated headers
drm/msm/dsi: fix definition of msm_dsi_pll_28nm_8960_init()
drm/msm/dsi: Parse DSI lanes via DT
drm/msm/dsi: Drop VDD regulator for MSM8916
drm/msm/dsi: Remove incorrect warning on host attach
drm/msm: Free fb helper resources in msm_unload
drm/msm/mdp: Detach iommu in mdp4_destroy
drm/msm: make iommu port names const'ier
drm/msm/mdp: Use atomic helper to set crtc property
dt-bindings: msm/hdmi: Add HDMI PHY bindings
...
By simply setting vref-mv to 0 the internal reference will be used.
Document that!
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Rob Herring <robh@kernel.org>
There are two distinct RealView EB system controller that we need
to detect and handle because their register layout differ
slightly.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Herring <robh@kernel.org>
The binding documentation uses both "uVolt" and "uV" for micro-volt.
Improve consistency by settling on "uV".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Currently, network /system cross-timestamping is performed in the
PTP_SYS_OFFSET ioctl. The PTP clock driver reads gettimeofday() and
the gettime64() callback provided by the driver. The cross-timestamp
is best effort where the latency between the capture of system time
(getnstimeofday()) and the device time (driver callback) may be
significant.
The getcrosststamp() callback and corresponding PTP_SYS_OFFSET_PRECISE
ioctl allows the driver to perform this device/system correlation when
for example cross timestamp hardware is available. Modern Intel
systems can do this for onboard Ethernet controllers using the ART
counter. There is virtually zero latency between captures of the ART
and network device clock.
The capabilities ioctl (PTP_CLOCK_GETCAPS), is augmented allowing
applications to query whether or not drivers implement the
getcrosststamp callback, providing more precise cross timestamping.
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: kevin.b.stanton@intel.com
Cc: kevin.j.clarke@intel.com
Cc: hpa@zytor.com
Cc: jeffrey.t.kirsher@intel.com
Cc: netdev@vger.kernel.org
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com>
[jstultz: Commit subject tweaks]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Enable power management. This patch enables the clocks before transfer
and disables after the transfer. It also adds the clock description.
Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This reverts commit 82c2ffeb21 ("[media] tvp5150: document input
connectors DT bindings") since the DT binding is too device driver
specific and should instead be more generic and use the bindings
in Documentation/devicetree/bindings/display/connector/ and linked
to the tvp5150 using the OF graph port and endpoints.
There are still ongoing discussions about how the input connectors
will be supported by the Media Controller framework so until that
is settled, it is better to revert the connectors portion of the
bindings to avoid known to be broken bindings docs to hit mainline.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The DSI driver is currently unaware of how the DSI physical data lanes
are mapped to the logical lanes provided by the DSI controller.
Create a DT binding "qcom,data-lane-map" that provides this information
on a given platform.
The MSM DSI controller is restricted in terms of what all mappings
it can support. The lane polarity is fixed for all the lanes, the clock
lanes are fixed, and the data lanes can be swapped among each other only
for a few combinations. Apply these restrictions when we parse the DT
data.
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
kvm_lpage_info->write_count is used to detect if the large page mapping
for the gfn on the specified level is allowed, rename it to disallow_lpage
to reflect its purpose, also we rename has_wrprotected_page() to
mmu_gfn_lpage_is_disallowed() to make the code more clearer
Later we will extend this mechanism for page tracking: if the gfn is
tracked then large mapping for that gfn on any level is not allowed.
The new name is more straightforward
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The highlights are:
* Enable VFIO device on PowerPC, from David Gibson
* Optimizations to speed up IPIs between vcpus in HV KVM,
from Suresh Warrier (who is also Suresh E. Warrier)
* In-kernel handling of IOMMU hypercalls, and support for dynamic DMA
windows (DDW), from Alexey Kardashevskiy.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add device tree bindings to the Goldfish virtual platform battery drivers.
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Jin Qian <jinqian@android.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This board has PCI ID: 1779:13cf
[mchehab@osg.samsung.com: Make scripts/checkpatch.pl happy]
Signed-off-by: Pojar George <geoubuntu@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Update the IPMMU DT binding documentation to include the r8a7795 compat
string as well as the "renesas,ipmmu-main" property that on r8a7795 will
be used to describe the topology and the relationship between the various
cache IPMMU instances and the main IPMMU.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add documentation for 3 formats, used by RealSense cameras like R200.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This changes how the used gpios are stored (i.e. a struct gpio_descs
instead of two struct gpio_desc) and as with >2 gpios the states are
numbered differently the function rotary_encoder_get_state returns
unencoded numbers instead of grey encoded numbers before. The latter has
some implications on how the returned value is used and so the change is
bigger than one might expect at first.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull Allwinner clk updates from Maxime Ripard:
Allwinner clocks additions for 4.6
A bunch of things, mostly:
- Finally switched everything over to OF_CLK_DECLARE, which should remove
orphans clocks entirely
- Reworked the clk-factors to be able to add new parameters
- Improved the error reporting
- A bunch of new clocks for new SoCs.
* tag 'sunxi-clocks-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (25 commits)
clk: sunxi: Add apb0 gates for H3
clk: sunxi: Improve divs_clk error handling and reporting
clk: sunxi: improve divider_clk error handling and reporting
clk: sunxi: improve mux_clk error handling and reporting
clk: sunxi: Fix sun8i-a23-apb0-clk divider flags
clk: sunxi: Remove clk_register_clkdev calls
clk: sunxi: Remove old probe and protection code
clk: sunxi: convert current clocks registration to CLK_OF_DECLARE
clk: sunxi: Make clocks setup functions take const pointer
clk: sunxi: Make clocks setup functions return their clock
clk: sunxi: improve error reporting for the mux clock
clk: sunxi: don't mark sun6i_ar100_data __initconst
clk: sunxi: add bus gates for A83T
clk: sunxi: Add apb0 gates for A83T
clk: sunxi: rewrite sun8i-a23-mbus-clk using the simpler composite clk
clk: sunxi: rewrite sun6i-ar100 using factors clk
clk: sunxi: rewrite sun6i-a31-ahb1-clk using factors clk with custom recalc
clk: sunxi: factors: Drop round_rate from clk ops
clk: sunxi: factors: Support custom formulas
clk: sunxi: factors: Consolidate get_factors parameters into a struct
...
Add HDMI PHY bindings. Update the example to use HDMI PHY.
Added a missing power-domains property in the HDMI core bindings. Also,
simplified HDMI TX's DT node name in the example.
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
- New i.MX6 board support: NXP/Freescale imx6qp boards, Advantech/GE,
Uniwest evi, Engicam IMX6 Q7, Toradex Apalis SoM and Ixora carrier
boards
- Relicense vf610 dts files under GPLv2/X11
- A patch series from Stefan updating Vybrid Colibri board support with
PMU, regulators and other devices enabled
- Correct PWM pinmux for Ventana boards and add more pinmux for GW54xx
- Clean up imx6q-tbs2910 dts file and add SATA PHY configuration
- A series from Russell cleaning up hummingboard dts files
- A series from Lothar updating Ka-Ro i.MX28, i.MX53 and i.MX6 boards
to use better audio codec frequency and display configurations
- Clean up whitespaces in i.MX6UL pinctrl header and add more devices
support for the SoC
- Other random dts updates to enable various devices
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW1aZfAAoJEFBXWFqHsHzOWvwH/1ieekZ5VYnGyO4CT39DaNxU
LMkywkPtp8oUfdVHOfGEMj43knYHsaVFakGS2w8iMNzg+YonWXG/mkR3HUJmoS1L
HzFEnapLzACSSCbn8yZzWzzNvAlg2arqFErQUlhXe9/CNz64uZSigsO3Ib/JNOlX
GWDRa8szryEkEyk2cJo/wyWWSkLGGRai4uNBR6BmUq/MltVjVHOvTV5NeyKpinHZ
mQQFGEbvVk1hJ0sfceX/rmdxgvV0H3Axq8C0JyzbevUTcvS45A85tEXHkrHbYb/f
mJCNXxmmt+NrH8x79YxnuhKTRQ8lNn8fBu9wOtMaBJjRNB3ie3HBh2QabXBs/MA=
=FKmy
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt2
Merge "i.MX device tree updates for 4.6" from Shawn Guo:
- New i.MX6 board support: NXP/Freescale imx6qp boards, Advantech/GE,
Uniwest evi, Engicam IMX6 Q7, Toradex Apalis SoM and Ixora carrier
boards
- Relicense vf610 dts files under GPLv2/X11
- A patch series from Stefan updating Vybrid Colibri board support with
PMU, regulators and other devices enabled
- Correct PWM pinmux for Ventana boards and add more pinmux for GW54xx
- Clean up imx6q-tbs2910 dts file and add SATA PHY configuration
- A series from Russell cleaning up hummingboard dts files
- A series from Lothar updating Ka-Ro i.MX28, i.MX53 and i.MX6 boards
to use better audio codec frequency and display configurations
- Clean up whitespaces in i.MX6UL pinctrl header and add more devices
support for the SoC
- Other random dts updates to enable various devices
* tag 'imx-dt-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (75 commits)
ARM: dts: imx53-qsb: Fix gpio button polarity
ARM: dts: vfxxx: Add DAC node for Vybrid SoC
ARM: dts: imx6q: add missing links between ipu2 and mipi dsi
ARM: dts: imx: Add support for Advantech/GE B850v3
ARM: dts: imx: Add support for Advantech/GE B650v3
ARM: dts: imx: Add support for Advantech/GE B450v3
ARM: dts: imx: Add support for Advantech/GE Bx50v3
ARM: dts: imx: Add Advantech BA-16 Qseven module
of: Add vendor prefix for General Electric Company
of: Add vendor prefix for Advantech Corporation
ARM: dts: imx35.dtsi: change the clock information for usb
ARM: dts: imx25.dtsi: change the clock information for usb
ARM: dts: imx6ul: add kpp support
ARM: dts: imx6ul: add gpmi support
ARM: dts: imx6ul: add lcdif support
ARM: dts: imx6ul: add sai support
ARM: dts: imx6ul: add flexcan support
ARM: dts: imx6ul: add sdma support
ARM: dts: imx6ul: add pwm[1-4] nodes
ARM: dts: imx6ul: disable PWMs by default
...
This patch restructures the DMA bus settings and this is done
by introducing a new platform structure used for programming
the AXI Bus Mode Register inside the DMA module.
This structure can be populated from device-tree as documented in the
binding txt file.
After initializing the DMA, the AXI register can be optionally tuned
for platform drivers based.
This patch also reworks some parameters to make coherent the DMA
configuration now that AXI register is introduced.
For example, the burst_len is managed by using the mentioned axi
support above; so the snps,burst-len parameter has been removed.
It makes sense to provide the AAL parameter from DT to Address-Aligned
Beats inside the Register0 and review the PBL settings when initialize
the engine.
For PCI glue, rebuilding the story of this setting, it
was added to align a configuration so not for fixing some
known problem. No issue raised after this patch.
It is safe to use the default burst length instead of
tuning it to the maximum value
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RDS iWarp support code has become stale and non testable. As
indicated earlier, am dropping the support for it.
If new iWarp user(s) shows up in future, we can adapat the RDS IB
transprt for the special RDMA READ sink case. iWarp needs an MR
for the RDMA READ sink.
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Add support for the GPMC Advanced AAD (address/data muxed) timings
on hardware supporting the feature like the AM335x and DM816X.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWuKj+AAoJENJaa9O+djCTTZkQAM9hieohu8GRqwxUAA/G8tlp
h/fKVDPEJvZu9AnVtGqPTN77z6aOhVJJMeIaOirlvZ6kfNcxeIf9t/bS38xhtJpO
UbsYKUXMRK7Ba4w0tKgS2sTuB4PYsGm20PKdcdgXNgkQnyj3ZKLvl4wv6qbrNDnd
Gq/i4qa+Ft14FoY2kNc/iLT/pwkp4MfW3lvjimEvDiECnSbRBJQxj0SUwuL+8Hco
t9J3YM1Q0VBRG9U3t7+eFEKve54wC640q3qokn36I/Jg3jOu8qFbR832yqdMcDeq
vqyFRe2n7FT7tJxxlcnTZ4lIT6g0YkOeyhRIL3IqIAUcNC8/EQaepGH7EONQKDH2
M0yMW36xmEMXHzT9cuOhqD8fp8sLMMaATkxz21HrtIKNT6G+OSKTAEhEG8ACZM3p
k7NO9nWFO1xPMmOVCcVX6aJcZ5WzYt59EHS29bMRm/e3jQiB9T8xL5m9moIWGtUG
9Cq6i8R0dEP2kkFOXSadoIYVFiTXHgWjHS4uJW07lDycqnqOdUeEQ3E/wWXXBkzU
M1tVwjgvtRNVrhbgpNnUEALKQ/6qN8W8SL0V4/JPkIuAP+UsiCCyV2QgNeBy26+p
SoOv3BI8sJYi7Dk+jdgobM/ScVVw1/nOY4RmMOX8rprllsCwjKvmKHCr3/8qe5wK
Ad/2O8m0w72QFweiwLYb
=3rkE
-----END PGP SIGNATURE-----
Merge tag 'gpmc-omap-for-v4.6' of https://github.com/rogerq/linux into next/drivers
Merge "OMAP-GPMC: Add address/data muxed timings" from Roger Quadros:
* Add support for the GPMC Advanced AAD (address/data muxed) timings
on hardware supporting the feature like the AM335x and DM816X.
* tag 'gpmc-omap-for-v4.6' of https://github.com/rogerq/linux:
dt-bindings: bus: ti-gpmc: Add AAD timings properties
memory: omap-gpmc: Add support for AAD timings
Add vendor prefix for United Radiant Technology Corporation,
a provider of liquid crystal display technologies.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add common DT property for regulator node to support of
active discharge enable/disable configuration of regulator.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This is the DPCM based machine driver with rt5650 and rt5514.
Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Signed-off-by: PC Liao <pc.liao@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We want the fixes in here, and others are sending us pull requests based
on this kernel tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Good to see several new contributors in this set - and more generally a
number of new 'faces' over this whole cycle.
Staging movements
* hmc5843
- out of staging.
* periodic RTC trigger
- driver dropped. This is an ancient driver (brings back some memories ;)
that was always somewhat of a bodge. Originally there was a driver that
never went into mainline that supported large numbers of periodict timers
on the PXA270 via this route. Discussions to have a generic periodic
timer subsystem never went anywhere. At the time RTC periodic
interrupts were real - now they are emulated using high resolution
timers so with the HRT driver this has become pointless.
New device support
* mpu6050 driver
- Add support for the mpu6500.
* TI tpl0102 potentiometer
- new driver.
* Vybrid SoC DAC
- new driver. The ADC on this SoC has been supported for a while, this
adds a separate driver for the DAC.
New Features
* hmc5844
- Attributes to configure the bias current (typically part of a self test)
This could be done before via a somewhat obscure custom interface.
This at least makes it easy to tell what is going on.
- Document all custom attributes.
* mpu6050
- Add support for calibration offset control and readback.
* ms5611
- power regulator support. This is always one that gets added the
first time someone has a board that needs it. Here it was needed,
hence it was added.
Cleanups / minor fixes
* tree wide
- clean up all the myriad different return values in response to a
failure of i2c_check_functionality. After discussions everyone seemed
happy wiht -EOPNOTSUPP which seems to describe the situation well.
I encouraged a tree wide cleanup to set a good example in future for
this.
* core
- Typos in the iio_event_spec documentation in iio.h
* afe4403
- select REGMAP_SPI to avoid dependency issues
- mark suspend/resume as __maybe_unused to avoid warnings
* afe4404
- mark suspend/resume as __maybe_unused to avoid warnings
* atlas-ph-sensor
- switch the regmap cache type from linear to rbtree to gain reading of
registers on initial startup. It's not immediately obvious, but
regmap flat is meant for high performances cases so doesn't read these
registers.
- use regmap_bulk_read in one case where it was using
i2c_smbus_read_i2c_block_data directly (unlike everything else that was
through regmap).
* ina2xx
- stype cleanups (lots of them!)
* isl29018
- Get the struct device back from regmap rather than storing another
copy of it in the private data. This cleanup makes sense in a number
of other drivers so patches may well follow.
* mpu6050
- style cleanups (lots of them!)
- improved return value handling
- use usleep_range to avoid the usual issues with very short msleeps.
- add some missing documentation.
* ms5611
- use the probed device name for the device rather than the driver name.
- select IIO_BUFFER to avoid dependency issues
* palmas
- drop IRQF_EARLY_RESUME as no longer needed after genirq changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=rDIQ
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.6c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Third set of IIO new device support, features and cleanups for the 4.6 cycle.
Good to see several new contributors in this set - and more generally a
number of new 'faces' over this whole cycle.
Staging movements
* hmc5843
- out of staging.
* periodic RTC trigger
- driver dropped. This is an ancient driver (brings back some memories ;)
that was always somewhat of a bodge. Originally there was a driver that
never went into mainline that supported large numbers of periodict timers
on the PXA270 via this route. Discussions to have a generic periodic
timer subsystem never went anywhere. At the time RTC periodic
interrupts were real - now they are emulated using high resolution
timers so with the HRT driver this has become pointless.
New device support
* mpu6050 driver
- Add support for the mpu6500.
* TI tpl0102 potentiometer
- new driver.
* Vybrid SoC DAC
- new driver. The ADC on this SoC has been supported for a while, this
adds a separate driver for the DAC.
New Features
* hmc5844
- Attributes to configure the bias current (typically part of a self test)
This could be done before via a somewhat obscure custom interface.
This at least makes it easy to tell what is going on.
- Document all custom attributes.
* mpu6050
- Add support for calibration offset control and readback.
* ms5611
- power regulator support. This is always one that gets added the
first time someone has a board that needs it. Here it was needed,
hence it was added.
Cleanups / minor fixes
* tree wide
- clean up all the myriad different return values in response to a
failure of i2c_check_functionality. After discussions everyone seemed
happy wiht -EOPNOTSUPP which seems to describe the situation well.
I encouraged a tree wide cleanup to set a good example in future for
this.
* core
- Typos in the iio_event_spec documentation in iio.h
* afe4403
- select REGMAP_SPI to avoid dependency issues
- mark suspend/resume as __maybe_unused to avoid warnings
* afe4404
- mark suspend/resume as __maybe_unused to avoid warnings
* atlas-ph-sensor
- switch the regmap cache type from linear to rbtree to gain reading of
registers on initial startup. It's not immediately obvious, but
regmap flat is meant for high performances cases so doesn't read these
registers.
- use regmap_bulk_read in one case where it was using
i2c_smbus_read_i2c_block_data directly (unlike everything else that was
through regmap).
* ina2xx
- stype cleanups (lots of them!)
* isl29018
- Get the struct device back from regmap rather than storing another
copy of it in the private data. This cleanup makes sense in a number
of other drivers so patches may well follow.
* mpu6050
- style cleanups (lots of them!)
- improved return value handling
- use usleep_range to avoid the usual issues with very short msleeps.
- add some missing documentation.
* ms5611
- use the probed device name for the device rather than the driver name.
- select IIO_BUFFER to avoid dependency issues
* palmas
- drop IRQF_EARLY_RESUME as no longer needed after genirq changes.
On dm814x we have 13 ADPLLs with 3 to 4 outputs on each. The
ADPLLs have several dividers and muxes controlled by a shared
control register for each PLL.
Note that for the clocks to work as device drivers for booting on
dm814x, this patch depends on "ARM: OMAP2+: Change core_initcall
levels to postcore_initcall" that has already been merged.
Also note that this patch does not implement clk_set_rate for the
PLL, that will be posted later on when available.
Cc: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
The existing KVM_CREATE_SPAPR_TCE only supports 32bit windows which is not
enough for directly mapped windows as the guest can get more than 4GB.
This adds KVM_CREATE_SPAPR_TCE_64 ioctl and advertises it
via KVM_CAP_SPAPR_TCE_64 capability. The table size is checked against
the locked memory limit.
Since 64bit windows are to support Dynamic DMA windows (DDW), let's add
@bus_offset and @page_shift which are also required by DDW.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@samba.org>
B.A.T.M.A.N. V. Its implementation started quite some years ago,
but due to the big changes being introduced it took a while to be
discussed, designed, worked, re-worked, tested and debugged (well,
we're never done with the latest). The entire operation has
basically been a team work involving all the core contributors
together with other people interested in the project.
The new protocol is divided into two main subcomponents, called
respectively ELP and OGMv2. The former is in charge of
dealing with the neighbour discovery and link quality estimation,
while the latter implements the algorithm that spreads the
metrics around the network and computes optimal paths.
The biggest change introduced with B.A.T.M.A.N. V is the new
metric: the protocol won't rely on packet loss anymore, but it
will use the estimated throughput extracted directly from the
wifi driver (when available) by querying cfg80211.
Batman-adv will also send some unicast probing packets when
an interface is not used for payload traffic to make sure that
such values are current.
The new protocol can be compiled-in or not like other
features we have and when selected will pull in CFG80211 as
dependency for the reason described above.
Thanks to the big work brought up in the past by Marek Lindner,
batman-adv can easily deal several protocol implementations,
therefore compiling in this new version does not exclude the
older.
This means that the user is offered the option to choose
the protocol when creating the mesh interface (default is the
old one to keep backward compatibility).
Along with the protocol there are some sysfs knobs that are
introduced to fine tune some of its behaviours, but users
are recommended to keep the default values unless they know
what they are doing.
The last patch is about advertising our own patchwork platform
(thanks to Sven Eckelmann for having set that up!) in the
MAINTAINERS file.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=qd6p
-----END PGP SIGNATURE-----
Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge
Antonio Quartulli says:
====================
batman-adv 20160229
this is our (hopefully) latest batch of patches intended for net-next.
With this patchset we finally introduce B.A.T.M.A.N. V: the latest
version of our routing protocol.
Technical documentation describing the protocol in more detail can
be found in our wiki[1][2][3][4].
For what concerns this pull request, you can find the high level
description right below.
[1] https://www.open-mesh.org/projects/batman-adv/wiki/BATMAN_V
[2] https://www.open-mesh.org/projects/batman-adv/wiki/OGMv2
[3] https://www.open-mesh.org/projects/batman-adv/wiki/ELP
[4] https://www.open-mesh.org/projects/batman-adv/wiki/BATMAN_V_Tests
...
With this patchset we finally introduce our new routing protocol:
B.A.T.M.A.N. V. Its implementation started quite some years ago,
but due to the big changes being introduced it took a while to be
discussed, designed, worked, re-worked, tested and debugged (well,
we're never done with the latest). The entire operation has
basically been a team work involving all the core contributors
together with other people interested in the project.
The new protocol is divided into two main subcomponents, called
respectively ELP and OGMv2. The former is in charge of
dealing with the neighbour discovery and link quality estimation,
while the latter implements the algorithm that spreads the
metrics around the network and computes optimal paths.
The biggest change introduced with B.A.T.M.A.N. V is the new
metric: the protocol won't rely on packet loss anymore, but it
will use the estimated throughput extracted directly from the
wifi driver (when available) by querying cfg80211.
Batman-adv will also send some unicast probing packets when
an interface is not used for payload traffic to make sure that
such values are current.
The new protocol can be compiled-in or not like other
features we have and when selected will pull in CFG80211 as
dependency for the reason described above.
Thanks to the big work brought up in the past by Marek Lindner,
batman-adv can easily deal several protocol implementations,
therefore compiling in this new version does not exclude the
older.
This means that the user is offered the option to choose
the protocol when creating the mesh interface (default is the
old one to keep backward compatibility).
Along with the protocol there are some sysfs knobs that are
introduced to fine tune some of its behaviours, but users
are recommended to keep the default values unless they know
what they are doing.
The last patch is about advertising our own patchwork platform
(thanks to Sven Eckelmann for having set that up!) in the
MAINTAINERS file.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull sparc fixes from David Miller:
1) System call tracing doesn't handle register contents properly across
the trace. From Mike Frysinger.
2) Hook up copy_file_range
3) Build fix for 32-bit with newer tools.
4) New sun4v watchdog driver, from Wim Coekaerts.
5) Set context system call has to allow for servicable faults when we
flush the register windows to memory
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix sparc64_set_context stack handling.
sparc32: Add -Wa,-Av8 to KBUILD_CFLAGS.
Add sun4v_wdt watchdog driver
sparc: Fix system call tracing register handling.
sparc: Hook up copy_file_range syscall.
Add support for the watchdog timer on NI cRIO-903x and cDAQ-913x real-
time controllers.
Signed-off-by: Jeff Westfahl <jeff.westfahl@ni.com>
Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
This patch adds a exynos5420 driver data to support mic_bypass
option to bypass the mic from display out path.
The mic(Mobile image compressor) compresses RGB data from fimd
and send the compressed data to the mipi dsi.
The bypass option can be founded from system register and the bit
is 11. The option bit has been introduced since exynos5420. The
only difference between exynos5250 and exynos5420/exynos5422 is
existence of the bit. Until the MIC is defined and enabled from
device tree, the bypass mic will be default option.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch supports mipi dsi for exynos5422. The dsi register
offsets of the exynos5422 are similar with exynos5433. However,
the values of the registers are quite different from the
exynos5433. For example, the exynos5422 uses sw reset like
previous chips.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Since the related driver (CPG/MSSR driver) only manages the first module
clock, this driver should not handle the HSUSB registers. So, this patch
removes the HSUSB registers handling.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Most newer Rockchip SoCs provide the possibility to use a usb-phy
as passthrough for the debug uart (uart2), making it possible to
for example get console output without needing to open the device.
This patch adds an early_initcall to enable this functionality
conditionally via the commandline and also disables the corresponding
usb controller in the devicetree.
Currently only data for the rk3288 is provided, but at least the
rk3188 and arm64 rk3368 also provide this functionality and will be
enabled later.
On a spliced usb cable the signals are tx on white wire(D+) and
rx on green wire(D-).
The one caveat is that currently the reconfiguration of the phy
happens as early_initcall, as the code depends on the unflattened
devicetree being available. Everything is fine if only a regular
console is active as the console-replay will happen after the
reconfiguation. But with earlycon active output up to smp-init
currently will get lost.
The phy is an optional property for the connected dwc2 controller,
so we still provide the phy device but fail all phy-ops with -EBUSY
to make sure the dwc2 does not try to transmit anything on the
repurposed phy.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add dt binding documentation for rockchip display port PHY.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This patch adds a binding that describes the Rockchip eMMC PHYs
found on Rockchip SoCs eMMC interface.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
The settings in GPR8 are dependent upon the particular layout of the
hardware platform. As such, they should be configurable via the device
tree.
Look up PHY Tx driver settings from the device tree. Fall back to the
original hard-coded values if they are not specified in the device tree.
Signed-off-by: Justin Waters <justin.waters@timesys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
This is a minor cycle with :
- cleanup fixes from Arnd, mainly build oriented and sparse type ones
- dma fixes for requestors above 32 (impacting mainly camera driver)
- some minor cleanup on pxa3xx device-tree side
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lBYC
-----END PGP SIGNATURE-----
Merge tag 'pxa-for-4.6' of https://github.com/rjarzmik/linux into next/soc
Merge "pxa changes for v4.6 cycle" from Robert Jarzmik:
This is a minor cycle with :
- cleanup fixes from Arnd, mainly build oriented and sparse type ones
- dma fixes for requestors above 32 (impacting mainly camera driver)
- some minor cleanup on pxa3xx device-tree side
* tag 'pxa-for-4.6' of https://github.com/rjarzmik/linux:
dmaengine: pxa_dma: fix the maximum requestor line
ARM: pxa: add the number of DMA requestor lines
dmaengine: mmp-pdma: add number of requestors
dma: mmp_pdma: Add the #dma-requests DT property documentation
ARM: pxa: pxa3xx device-tree support cleanup
ARM: pxa: don't select RFKILL if CONFIG_NET is disabled
ARM: pxa: fix building without IWMMXT
ARM: pxa: move extern declarations to pm.h
ARM: pxa: always select one of the two CPU types
ARM: pxa: don't select GPIO_SYSFS for MIOA701
ARM: pxa: mark unused eseries code as __maybe_unused
ARM: pxa: mark spitz_card_pwr_ctrl as __maybe_unused
ARM: pxa: define clock registers as __iomem
Add ARM CoreLink CCI-550 cache coherent interconnect PMU
driver support. The CCI-550 PMU shares all the attributes of CCI-500
PMU, except for an additional master interface (MI-6 - 0xe).
CCI-550 requires the same work around as for CCI-500 to
write to the PMU counter.
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Punit Agrawal <punit.agrawal@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Just introduce the A83T support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7u3U
-----END PGP SIGNATURE-----
Merge tag 'sunxi-core-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/soc
Merge "Allwinner core changes for 4.6" from Maxime Ripard:
Just introduce the A83T support.
* tag 'sunxi-core-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi: Introduce Allwinner for A83T support
Add initial support for Armada 7K/8K
Update Marvell documentation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlbQXX4ACgkQCwYYjhRyO9V/HwCdF0ehY/nvq3czV19MjuG6ZZGL
IUIAn3bzCXq/AB42cd8heU9NDUSzNVpi
=1eah
-----END PGP SIGNATURE-----
Merge tag 'mvebu-arm64-4.6-2' of git://git.infradead.org/linux-mvebu into next/arm64
Merge "mvebu arm64 for 4.6 (part 2)" from Gregory CLEMENT:
Add initial support for Armada 7K/8K
Update Marvell documentation
* tag 'mvebu-arm64-4.6-2' of git://git.infradead.org/linux-mvebu:
arm64: update ARCH_MVEBU for Marvell Armada 7K/8K support
Documentation: arm: add Marvell Armada 7K and 8K families
Documentation: arm: add link to Armada 38x Functional Spec
Documentation: arm: improve Armada 37xx description
Documentation: arm: update Marvell product listing
To configure the virtual PMUv3 overflow interrupt number, we use the
vcpu kvm_device ioctl, encapsulating the KVM_ARM_VCPU_PMU_V3_IRQ
attribute within the KVM_ARM_VCPU_PMU_V3_CTRL group.
After configuring the PMUv3, call the vcpu ioctl with attribute
KVM_ARM_VCPU_PMU_V3_INIT to initialize the PMUv3.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In some cases it needs to get/set attributes specific to a vcpu and so
needs something else than ONE_REG.
Let's copy the KVM_DEVICE approach, and define the respective ioctls
for the vcpu file descriptor.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
To support guest PMUv3, use one bit of the VCPU INIT feature array.
Initialize the PMU when initialzing the vcpu with that bit and PMU
overflow interrupt set.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Registers are 64bit apart, so we refactor bus_shift handling a little and set
it based on the DT compatible. Also, EXT_ACC is different. It has been tested
on a Salvator-X (Gen3) and, to check for regressions, on a Lager (Gen2).
Signed-off-by: Ai Kyuse <ai.kyuse.uw@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Document the devicetree bindings for the SDHCI peripheral found on
Microchip PIC32 class devices.
Signed-off-by: Andrei Pistirica <andrei.pistirica@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Since sdhci-iproc can support bcm2835 we need add the
compatible string to the binding.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Scott Branden <sbranden@broadcom.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Scott Branden <sbranden@broadcom.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch adds vendor prefix for General Electric Company
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This attribute is exported to user space to disable the link
throughput auto-detection by setting a fixed value.
The throughput override value is used when batman-adv is
computing the link throughput towards a neighbour.
If the value is set to 0 then batman-adv will try to detect
the throughput by itself.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
This parameter can be set individually on each interface and
allows the configuration of the elp interval for the link
quality measurements during runtime. Usually it is desirable
to set it to a higher (= slower) value on interfaces which
have a more static characteristic (e.g. wired interfaces)
or very dense neighbourhoods to reduce overhead.
Developed by Linus during a 6 months trainee study period in
Ascom (Switzerland) AG.
Signed-off-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
[antonio@open-mesh.com: respin on top of the latest master]
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
If this property is not set, the max packet size is 1023 bytes, and if
the total of packet size for pervious transactions are more than 256 bytes,
it can't accept any transactions within this frame. The use case is single
transaction, but higher frame rate.
If this property is set, the max packet size is 188 bytes, it can handle
more transactions than above case, it can accept transactions until it
considers the left room size within frame is less than 188 bytes, software
needs to make sure it does not send more than 90%
maximum_periodic_data_per_frame. The use case is multiple transactions, but
less frame rate.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
This patch adds the missing compatible strings from ci_hdrc_imx.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
We didn't have a batch last week, so this one is slightly larger.
None of them are scary though, a handful of fixes for small DT pieces,
replacing properties with newer conventions.
Highlights:
- N900 fix for setting system revision
- onenand init fix to avoid filesystem corruption
- Clock fix for audio on Beaglebone-x15
- Fixes on shmobile to deal with CONFIG_DEBUG_RODATA (default y in 4.6)
+ misc smaller stuff.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=xeuW
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"We didn't have a batch last week, so this one is slightly larger.
None of them are scary though, a handful of fixes for small DT pieces,
replacing properties with newer conventions.
Highlights:
- N900 fix for setting system revision
- onenand init fix to avoid filesystem corruption
- Clock fix for audio on Beaglebone-x15
- Fixes on shmobile to deal with CONFIG_DEBUG_RODATA (default y in 4.6)
+ misc smaller stuff"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
MAINTAINERS: Extend info, add wiki and ml for meson arch
MAINTAINERS: alpine: add a new maintainer and update the entry
ARM: at91/dt: fix typo in sama5d2 pinmux descriptions
ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption
Revert "regulator: tps65217: remove tps65217.dtsi file"
ARM: shmobile: Remove shmobile_boot_arg
ARM: shmobile: Move shmobile_smp_{mpidr, fn, arg}[] from .text to .bss
ARM: shmobile: r8a7779: Remove remainings of removed SCU boot setup code
ARM: shmobile: Move shmobile_scu_base from .text to .bss
ARM: OMAP2+: Fix omap_device for module reload on PM runtime forbid
ARM: OMAP2+: Improve omap_device error for driver writers
ARM: DTS: am57xx-beagle-x15: Select SYS_CLK2 for audio clocks
ARM: dts: am335x/am57xx: replace gpio-key,wakeup with wakeup-source property
ARM: OMAP2+: Set system_rev from ATAGS for n900
ARM: dts: orion5x: fix the missing mtd flash on linkstation lswtgl
ARM: dts: kirkwood: use unique machine name for ds112
ARM: dts: imx6: remove bogus interrupt-parent from CAAM node
Merge "Broadcom devicetree-arm64 changes for 4.6" from Florian Fainelli:
This pull request contains Broadcom ARM64-based SoCs device tree changes:
- Anup adds additional nodes to the Broadcom Northstart 2 Device Trees: SDHCI
(iProc-compatible), ARM SP804 timers, ARM SP805 watchdog
- Anup also adds a binding documentation for the ARM SP805 watchdog since there
was not one in tree before
- Ray adds PCIE root complex nodes to the Northstar 2 Device Tree nodes, using
the iProc-compatible binding
- Jayachandran C. adds binding documentation for the Broadcom Vulcan processors and
reference platforms
* tag 'arm-soc/for-4.6/devicetree-arm64' of http://github.com/Broadcom/stblinux:
dt-bindings: Add documentation for Broadcom Vulcan
arm64: dts: Add PCIe0 and PCIe4 DT nodes for NS2
arm64: dts: Add ARM SP805 watchdog DT node for NS2
dt-bindings: watchdog: Add ARM SP805 DT bindings
arm64: dts: Add ARM SP804 timer DT nodes for NS2
arm64: dts: Add SDHCI DT node for NS2
For pxa based platforms, the number of requestor lines should be
specified, so that the driver can check if the flow control should be
activated (when a requestor line is asked for) or not.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Rob Herring <robh@kernel.org>
K2G SoC family is the newest version of the Keystone family of processors.
The technical reference manual for K2G can be found here:
http://www.ti.com/lit/ug/spruhy8/spruhy8.pdf
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=DF9n
-----END PGP SIGNATURE-----
Merge tag 'keystone_dts_for_4.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt
Merge "ARM: Keystone DTS for 4.6" from Santosh Shilimkar:
ARM: DTS: Add new bindings for K2G and the K2G evm
K2G SoC family is the newest version of the Keystone family of processors.
The technical reference manual for K2G can be found here:
http://www.ti.com/lit/ug/spruhy8/spruhy8.pdf
* tag 'keystone_dts_for_4.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone: Add minimum support for K2G evm
ARM: dts: keystone: Add Initial DT support for TI K2G SoC family
ARM: keystone: Create new binding for K2G SoC
adding board specific devices and few new boards:
- N900 improvments for adp1653 and gpio keys
- Add missing bandgap data for omap3
- Add more devices for compulab cm-t335
- Add n950 WLAN support, enable modem, add pinctrl for SSI
- Correct dm814x and dra62x auxclk rate, add support for GPMC and NAND
- Add syscon node for PHY's on dra7
- Add support more devices on logicpd torpedo
- Add USB host support for igep and specify boot console
- Fix audio clock for am335x-sl50 and specify boot console
- Remove deprecated tx-fifo-resize for dwc3 that was only used on
omap5 es1.0
- Add dra7 thermal data
- Update am43x-epos-evm compatible string to am438
- Add support for logicpd dm3730 som-lv
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pqea
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.6/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Device tree changes for omaps for v4.6 merge window. Mostly just
adding board specific devices and few new boards:
- N900 improvments for adp1653 and gpio keys
- Add missing bandgap data for omap3
- Add more devices for compulab cm-t335
- Add n950 WLAN support, enable modem, add pinctrl for SSI
- Correct dm814x and dra62x auxclk rate, add support for GPMC and NAND
- Add syscon node for PHY's on dra7
- Add support more devices on logicpd torpedo
- Add USB host support for igep and specify boot console
- Fix audio clock for am335x-sl50 and specify boot console
- Remove deprecated tx-fifo-resize for dwc3 that was only used on
omap5 es1.0
- Add dra7 thermal data
- Update am43x-epos-evm compatible string to am438
- Add support for logicpd dm3730 som-lv
* tag 'omap-for-v4.6/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (38 commits)
ARM: dts: am57xx-beagle-x15: Add eeprom information
ARM: dts: Add HSUSB2 EHCI Support to Logic PD DM37xx SOM-LV
ARM: dts: n900: Use linux input defines instead hardcoded constants
ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV
ARM: dts: omap3logic: Add PWM-Backlight
ARM: dts: omap3-n900: Allow gpio keys to be disabled
ARM: dts: am43x-epos-evm: Add the am438 compatible string
ARM: dts: DRA7: Add missing IVA and DSPEVE thermal domain data
ARM: dts: DRA7: Add IVA thermal data
ARM: dts: DRA7: Add DSPEVE thermal data
ARM: dts: remove deprecated property dwc3
ARM: dts: OMAP3-N950-N9: Add ssi idle pinctrl state
ARM: dts: am335x-sl50: Fix audio codec setup.
ARM: dts: am335x-sl50: Specify the device to be used for boot console output.
ARM: dts: omap3-igep0030-common: Add USB Host support
ARM: dts: igep00x0: Specify the device to be used for boot console output.
ARM: dts: LogicPD Torpedo: Set HSUSB0 Pin Mux
ARM: dts: OMAP3-N950-N9: Enable modem
ARM: dts: OMAP3-N950-N9: Enable SSI module
ARM: dts: LogicPD Torpedo: Add SPI EEPROM
...
Enable SMP support for mt7623.
Enable SMP support for mt2701
Add pinctrl for mt2701
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=JHE5
-----END PGP SIGNATURE-----
Merge tag 'v4.5-next-dts' of https://github.com/mbgg/linux-mediatek into next/dt
Merge "ARM: mediatek: dts updates for v4.6" from Matthias Brugger:
Add support for mt7623 SoC.
Enable SMP support for mt7623.
Enable SMP support for mt2701
Add pinctrl for mt2701
* tag 'v4.5-next-dts' of https://github.com/mbgg/linux-mediatek:
arm: dts: Add pinctrl/GPIO/EINT node for mt2701
ARM: dts: mt2701: enable basic SMP bringup for mt2701
ARM: dts: mt7623: enable SMP bringup
ARM: dts: mediatek: add MT7623 basic support
Document: DT: Add bindings for mediatek MT7623 SoC Platform
Al Viro has cleaned up the way ops are processed and waited for,
now orangefs.txt has an overview of how it works. Several recent
related commits have added to the comments in the code as well.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
On ThunderX T88 pass 1.x through 2.1 parts, broadcast TLBI
instructions may cause the icache to become corrupted if it contains
data for a non-current ASID.
This patch implements the workaround (which invalidates the local
icache when switching the mm) by using code patching.
Signed-off-by: Andrew Pinski <apinski@cavium.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This commit adds the base Device Tree files for the Armada 7K and 8K
SoCs, as well as the Armada 8040 DB board.
The Armada 7020, 7040 (7K family) and 8020, 8040 (8K family) are
composed of:
- An AP806 block that contains the CPU core and a few basic
peripherals. The AP806 is available in dual core configurations
(used in 7020 and 8020) and quad core configurations (used in 8020
and 8040).
- One or two CP110 blocks that contain all the high-speed interfaces
(SATA, PCIe, Ethernet, etc.). The 7K family chips have one CP110,
and the 8K family chips have two CP110, giving them twice the
number of HW interfaces.
In order to represent this from a Device Tree point of view, this
commit creates the following hierarchy:
* armada-ap806.dtsi - definitions common to dual/quad ap806
* armada-ap806-dual.dtsi - description of the two CPUs
* armada-7020.dtsi - description of the 7020 SoC
* armada-8020.dtsi - description of the 8020 SoC
* armada-ap806-quad.dtsi - description of the four CPUs
* armada-7040.dtsi - description of the 7040 SoC
* armada-7040-db.dts - description of the 7040 board
* armada-8040.dtsi - description of the 8040 SoC
The CP110 blocks are not described yet, and will be part of future
patch series.
[gregory.clement@free-electrons.com: Fix commit title by adding ' dts:']
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Simply document new compatibility string.
As a previous patch adds a generic R-Car Gen2 compatibility string
there appears to be no need for a driver updates.
By documenting these compat stings they may be used in DTSs shipped, for
example as part of ROMs. They must be used in conjunction with the Gen2
fallback compat string. At this time there are no known differences between
the r8a779[234] IP blocks and that implemented by the driver for the Gen2
fallback compat string. Thus there is no need to update the driver as the
use of the Gen2 fallback compat string will activate the correct code in
the current driver while leaving the option for r8a779[234]-specific driver
code to be activated in an updated driver should the need arise.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add fallback compatibility string for R-Car Gen 1 and Gen2.
In the case of Renesas R-Car hardware we know that there are generations of
SoCs, e.g. Gen 1 and Gen 2. But beyond that its not clear what the
relationship between IP blocks might be. For example, I believe that
r8a7779 is older than r8a7778 but that doesn't imply that the latter is a
descendant of the former or vice versa.
We can, however, by examining the documentation and behaviour of the
hardware at run-time observe that the current driver implementation appears
to be compatible with the IP blocks on SoCs within a given generation.
For the above reasons and convenience when enabling new SoCs a
per-generation fallback compatibility string scheme being adopted for
drivers for Renesas SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Currently, all ipv6 addresses are flushed when the interface is configured
down, including global, static addresses:
$ ip -6 addr show dev eth1
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 state UP qlen 1000
inet6 2100:1::2/120 scope global
valid_lft forever preferred_lft forever
inet6 fe80::e0:f9ff:fe79:34bd/64 scope link
valid_lft forever preferred_lft forever
$ ip link set dev eth1 down
$ ip -6 addr show dev eth1
<< nothing; all addresses have been flushed>>
Add a new sysctl to make this behavior optional. The new setting defaults to
flush all addresses to maintain backwards compatibility. When the set global
addresses with no expire times are not flushed on an admin down. The sysctl
is per-interface or system-wide for all interfaces
$ sysctl -w net.ipv6.conf.eth1.keep_addr_on_down=1
or
$ sysctl -w net.ipv6.conf.all.keep_addr_on_down=1
Will keep addresses on eth1 on an admin down.
$ ip -6 addr show dev eth1
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 state UP qlen 1000
inet6 2100:1::2/120 scope global
valid_lft forever preferred_lft forever
inet6 fe80::e0:f9ff:fe79:34bd/64 scope link
valid_lft forever preferred_lft forever
$ ip link set dev eth1 down
$ ip -6 addr show dev eth1
3: eth1: <BROADCAST,MULTICAST> mtu 1500 state DOWN qlen 1000
inet6 2100:1::2/120 scope global tentative
valid_lft forever preferred_lft forever
inet6 fe80::e0:f9ff:fe79:34bd/64 scope link tentative
valid_lft forever preferred_lft forever
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cs4271 has three power domains: vd, vl and va.
Enable them all, as long as the codec is in use.
While at it, factored out the reset code into its own function.
Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for the global clock controller found on
the IPQ4019 based devices. This includes UART, I2C, SPI etc.
Signed-off-by: Pradeep Banavathi <pradeepb@codeaurora.org>
Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
[sboyd@codeaurora.org: Drop 0x16024 enable_reg in crypto_ahb]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The VLAN GetNext operation is specific to some switches, and thus can be
complicated to implement for some drivers.
Remove the support for the vlan_getnext/port_pvid_get approach in favor
of the generic and simpler port_vlan_dump function.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to port_fdb_dump, add a port_vlan_dump function to DSA drivers
which gets passed the switchdev VLAN object and callback.
This function, if implemented, takes precedence over the soon legacy
vlan_getnext/port_pvid_get approach.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for APB0 in H3. It seems to be compatible with
earlier SOCs. apb0 gates controls R_ block peripherals (R_PIO, R_IR,
etc).
Since this gates behave just like any Allwinner clock gate, add a generic
compatible that can be reused if we don't have any clock to protect.
Signed-off-by: Krzysztof Adamski <k@japko.eu>
[Maxime: Removed the H3 compatible from the simple-gates driver, reworked
the commit log a bit]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
K2G SoC family is the newest version of the Keystone family of processors.
The technical reference manual for K2G can be found here:
http://www.ti.com/lit/ug/spruhy8/spruhy8.pdf
Add new bindings for K2G and the K2G evm. Also document these new bindings.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
The 'dev_id' parameter of the GPIO_LOOKUP{,_IDX} macros were removed by
commit ad824783fb ("gpio: better lookup method for platform GPIOs").
Update the documentation to reflect that.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch adds support for v5 of SYSMMU controller, found in Samsung
Exynos 5433 SoCs. The main difference of v5 is support for 36-bit physical
address space and some changes in register layout and core clocks hanging.
This patch also adds support for ARM64 architecture, which is used by
Exynos 5433 SoCs.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Exynos SYSMMU bindings documentation was merged before generic IOMMU
binding have been introduced. This patch updates documentation to match
current state.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The new property will allow to specify the range of GIC hwirqs to use for IPIs.
This is an optinal property. We preserve the previous behaviour of allocating
the last 2 * gic_vpes if it's not specified or DT is not supported.
Signed-off-by: Qais Yousef <qais.yousef@imgtec.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: <jason@lakedaemon.net>
Cc: <marc.zyngier@arm.com>
Cc: <jiang.liu@linux.intel.com>
Cc: <linux-mips@linux-mips.org>
Cc: <lisa.parratt@imgtec.com>
Cc: Qais Yousef <qsyousef@gmail.com>
Link: http://lkml.kernel.org/r/1449580830-23652-20-git-send-email-qais.yousef@imgtec.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
allwinner,sun8i-h3-r-pinctrl was added by
commit ba83a11104 ("pinctrl: sunxi: Add H3 R_PIO controller support")
but the patch was missing proper binding documentation. This patch fixes
this issue.
Signed-off-by: Krzysztof Adamski <k@japko.eu>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- add support for the imgtec Pistachio SoC reset controller
- make struct reset_control_ops const
- move DT cell size check into the core to avoid code duplication
in the drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bvYf
-----END PGP SIGNATURE-----
Merge tag 'reset-for-4.6' of git://git.pengutronix.de/git/pza/linux into next/drivers
Reset controller changes for v4.6
- add support for the imgtec Pistachio SoC reset controller
- make struct reset_control_ops const
- move DT cell size check into the core to avoid code duplication
in the drivers
* tag 'reset-for-4.6' of git://git.pengutronix.de/git/pza/linux:
reset: sti: Make reset_control_ops const
reset: zynq: Make reset_control_ops const
reset: socfpga: Make reset_control_ops const
reset: hi6220: Make reset_control_ops const
reset: ath79: Make reset_control_ops const
reset: lpc18xx: Make reset_control_ops const
reset: sunxi: Make reset_control_ops const
reset: img: Make reset_control_ops const
reset: berlin: Make reset_control_ops const
reset: berlin: drop DT cell size check
reset: img: Add Pistachio reset controller driver
reset: img: Add pistachio reset controller binding document
reset: hisilicon: check return value of reset_controller_register()
reset: Move DT cell size check to the core
reset: Make reset_control_ops const
reset: remove unnecessary local variable initialization from of_reset_control_get_by_index
Signed-off-by: Olof Johansson <olof@lixom.net>
Device tree part of the Armada 3700 support:
- binding for the Armada 3700 SoCs
- device tree files for the SoCs and a board
- tidy up the Marvell related files
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlbEltYACgkQCwYYjhRyO9UZxACgi1NcAIrem831BSMOHVRBphAB
qT8An3bCV/tPx2QYz0kKYmGfyb7VtTzo
=IdEY
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.6-1' of git://git.infradead.org/linux-mvebu into next/dt64
mvebu dt64 for 4.6 (part 1)
Device tree part of the Armada 3700 support:
- binding for the Armada 3700 SoCs
- device tree files for the SoCs and a board
- tidy up the Marvell related files
* tag 'mvebu-dt64-4.6-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: add the Marvell Armada 3700 family and a development board
devicetree: bindings: add DT binding for the Marvell Armada 3700 SoC family
Documentation: dt: Tidy up the Marvell related files
Documentation: dt-bindings: Add a new compatible for the Armada 3700
Signed-off-by: Olof Johansson <olof@lixom.net>
Non dt part of the Armada 3700 support:
- Kconfig update
- defconfig update
- documentation update (including MAINTAINERS:)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEUEABECAAYFAlbElN0ACgkQCwYYjhRyO9XkzgCfaYJggCHzsLpMvnTK1bMNgPCY
jYkAmOIRjMJskq40RBXSXpyoJboqyZs=
=tAva
-----END PGP SIGNATURE-----
Merge tag 'mvebu-arm64-4.6-1' of git://git.infradead.org/linux-mvebu into next/arm64
mvebu arm64 for 4.6 (part 1)
Non dt part of the Armada 3700 support:
- Kconfig update
- defconfig update
- documentation update (including MAINTAINERS:)
* tag 'mvebu-arm64-4.6-1' of git://git.infradead.org/linux-mvebu:
arm64: defconfig: enable Armada 3700 related config
Documentation: arm: update supported Marvell EBU processors
MAINTAINERS: Extend dts entry for ARM64 mvebu files
arm64: add mvebu architecture entry
irqchip/armada-370-xp: Do not enable it by default when ARCH_MVEBU is selected
ARM: mvebu: Use the ARMADA_370_XP_IRQ option
irqchip/armada-370-xp: Allow allocation of multiple MSIs
irqchip/armada-370-xp: Use shorter names for irq_chip
irqchip/armada-370-xp: Use PCI_MSI_DOORBELL_START where appropriate
irqchip/armada-370-xp: Use the generic MSI infrastructure
irqchip/armada-370-xp: Add Kconfig option for the driver
Signed-off-by: Olof Johansson <olof@lixom.net>
The patch adds LS2085a to PCIe compatible to fix the compatibility
issue when using firmware with LS2085a compatible property.
Signed-off-by: Minghuan Lian <minghuan.lian@nxp.com>
Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds device tree bindings for the Artpec-6 SoC.
Signed-off-by: Lars Persson <larper@axis.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
nodes and fixes like the increased drive-strength on the firefly.
Most interesting is maybe the enablement of the pl330 option
for handling the broken flushp operation that is present on the
current Rockchip SoCs. Together with the driver-side enablement
this should give us working dma finally.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJWvGKWAAoJEPOmecmc0R2B2j4IAKSBKgak7uASVfvycAnJ/E7a
jNjcz9s/SAWGAu+ES36rX23r1/u/UlkdDX0yS0vCFR4eHNn35uUrl3lQdqjFEDXZ
f/c9gCrHsfvQQJPLGRzkhFIrQ6L/Anrgk5nq75+C4GvMFRDsDo5qqRnS0iP3wIZP
VALc9PFqq9kJnnrdFymHVgc9ETCR+kTM9YGqDTzHYT2pHKxkBTAANx+Pr7/1Ib0b
BM/he5i7/K+NVb9pjw6t8JbyT2JgST+UcNFeGn6jYylYdW4awFzFvJN0Q9pp989y
7mjJe6Suh36tjp0kX0DnOvBCWYXB2i62cSsjFxsf8rZGjCbZ3YtXS15EWwXsxto=
=wj5r
-----END PGP SIGNATURE-----
Merge tag 'v4.6-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Assorted bunch of 32bit Rockchip devicetree changes. More clocks,
nodes and fixes like the increased drive-strength on the firefly.
Most interesting is maybe the enablement of the pl330 option
for handling the broken flushp operation that is present on the
current Rockchip SoCs. Together with the driver-side enablement
this should give us working dma finally.
* tag 'v4.6-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (30 commits)
ARM: dts: cros-ec-keyboard: Add LOCK key to keyboard matrix
ARM: dts: rockchip: replace gpio-key,wakeup with wakeup-source property
ARM: dts: rockchip: add arm,pl330-broken-no-flushp quirk for rk3036 SoCs
ARM: dts: rockchip: Add arm, pl330-broken-no-flushp quirk for rk3xxx platform
ARM: dts: rockchip: Add arm, pl330-broken-no-flushp quirk for rk3288 platform
dt-bindings: rockchip-dw-mshc: add RK3036 dw-mshc description
ARM: dts: rockchip: increase the mclk_fs to 512 for kylin board
ARM: dts: rockchip: support the spi for rk3036
ARM: dts: rockchip: add mclk for rt5616 on rk3036 kylin board
ARM: dts: rockchip: add the leds control for rk3036-kylin board
ARM: dts: rockchip: add tsadc node
clk: rockchip: Add new id for rk3066 tsadc clock
ARM: dts: rockchip: add clock-cells for usb phy nodes
ARM: dts: rockchip: Assign RK3288 EDP_24M input centrally
ARM: dts: rockchip: add soc-specific compatibles for rk3036 SoCs
ARM: dts: rockchip: Bump sd card pin drive strength up on firefly boards
dt-bindings: rockchip-dw-mshc: add RK3368 dw-mshc description
ARM: dts: rockchip: Add the SDIO wifi on Radxa Rock2 square
ARM: dts: rockchip: Add the iodomains for the Rock2 SOM
ARM: dts: rockchip: add rk3288 mipi_dsi nodes
...
Signed-off-by: Olof Johansson <olof@lixom.net>
a wrong handling of for_each_available_child_of_node.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJWuwL0AAoJEPOmecmc0R2BIjEH/iYUC2y8o1Wod13Sru7MJwAI
wOdShxlUYlY3+176bJdKwRoWlJpiD3039HEpq3GTvBBkbMVxfxM6lKF8vuE9kn5y
imVlkrOMKiHh8FBNi7Z+GhHbrSfApsfUwNFuZzCZb3xmRWk14aECyYfwJOmbjHwR
+FnrRo2J4iisw5FGHyNbZzJw4kXD9ztPsn27usBesAe0KgTbZbbS5JUvDYxtmyl2
mOW2jM2rbNP5wFF8awCiE3IfK79KnAvvuo8tGh5wYZgxKrmwsxMr4fyLmnEwRRtz
VDvX4YoxkBQtXvD5x4r92JtIm8jdJ/U6BHPVZYfxix20i4ifhztcf9DZABtsurM=
=N+9z
-----END PGP SIGNATURE-----
Merge tag 'v4.6-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers
Support for the power-domains on rk3368 and a fix for
a wrong handling of for_each_available_child_of_node.
* tag 'v4.6-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
soc: rockchip: power-domain: fix err handle while probing
soc: rockchip: power-domain: Modify power domain driver for rk3368
dt-bindings: modify document of Rockchip power domains
dt-bindings: add power-domain header for RK3368 SoCs
Signed-off-by: Olof Johansson <olof@lixom.net>
1. GICv3 support on Foundation models
2. Support for Juno R2 board
3. Support for ARM HDLCD on all Juno platforms
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=r0q6
-----END PGP SIGNATURE-----
Merge tag 'vexpress-for-v4.6/dt-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt
Few updates for ARM VExpress/Juno platforms
1. GICv3 support on Foundation models
2. Support for Juno R2 board
3. Support for ARM HDLCD on all Juno platforms
* tag 'vexpress-for-v4.6/dt-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: Add HDLCD support on Juno platforms
Documentation: drm: Add DT bindings for ARM HDLCD
arm64: dts: Add support for Juno r2 board
arm64: dts: move juno pcie-controller to base file
arm64: dts: add .dts for GICv3 Foundation model
arm64: dts: split Foundation model dts to put the GIC separately
arm64: dts: Foundation model: increase GICC region to allow EOImode=1
arm64: dts: prepare foundation-v8.dts to cope with GICv3
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge DT changes for lpc32xx from Vladimir Zapolskiy:
"The changes add description of clock providers and clock consumers,
define default irq types of SoC controllers and add PHY3250 board
regulators.
I'm adding an official LPC32xx maintainer Roland to Cc, however he seems
to be unresponsive for a quite long time (since 2014)."
* 'lpc32xx/dt' of https://github.com/vzapolskiy/linux:
arm: dts: phy3250: add SD fixed regulator
arm: dts: phy3250: add lcd and backlight fixed regulators
arm: dts: lpc32xx: assign interrupt types
arm: dts: lpc32xx: remove clock frequency property from UART device nodes
arm: dts: lpc32xx: add USB clock controller
arm: dts: lpc32xx: add clock properties to device nodes
arm: dts: lpc32xx: add clock controller device node
arm: dts: lpc32xx: add device nodes for external oscillators
dt-bindings: create arm/nxp folder and move LPC32xx SoC description to it
Signed-off-by: Olof Johansson <olof@lixom.net>
Add driver support for DAC peripheral on Vybrid SoC.
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
There is still quite a bit of code using this interface, so we can't
just remove it. Hopefully it will be possible in the future, but since
its scheduled removal date is past 2 years already, we are better having
the documentation reflecting the current state of things.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The "claim" sysfs interface has been removed, so its documentation now
lives in the "removed" folder.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- Yet another fix for n900 onenand to avoid corruption. This time to
fix the issue of mounting onenand back and forth between the original
maemo kernel and mainline Linux kernel. And it also seems there will
be two more fixes coming via the MTD tree as issues were discovered
also in the onenand driver during testing.
- Revert tps65217 regulator clean up as it breaks MMC for am335x
variants. The proper way to clean this up is just to rename the
tps65217.dtsi file into tps65217-am335x.dtsi as a similar setup
is used on many am335x boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWy321AAoJEBvUPslcq6Vz0osQAI7OJXSLqdmle3eV2Y2AbdpJ
jgZV31sjxCgnE91toURDpzzCNmpBwXKX8m2CToE4gCfERS9iNI1CXnV63AoR6A1Q
mUbzWDuulTDlwdEs/1n2E6QlYi/HYISYUI0sEZdK71nyStNDjsXfALpTfOSMMFj/
Jcr8FcCTM8ZdfvzAungijzc4szAJ1PHuV68PUbgE6t9c6s0zQfrT1E+Ty9CLPkyk
jnVCLCCrgHe+9oIXDQYE0z473h69Ij9PfIJmcYlTH+Gcu8hIT2FK9UyrgUQcKrSl
w4l1u8ZOA9225oYDjLE7RczPAsauIX1VHBqsNEVhmWsMc4LIjWdM+kF/8nB4Rve2
UfGjtfdVIN07PksilvCJr4HhZI8eTfWRvMgsGN8ypTZX8roFoHHwzjwrS245X5ve
VMdS3ZcTZsR8SoHrSYCJzfs10d27JDfL3ya5ekQREEJsANxwVSk2aHwRyTnxdMFd
lMmbzWKiYtzLs8Uvol+4h/wp8LCllP7/LKE8SkN/D6gc+jCzu5M4uOgj1c5lZtjM
mFawFqpO4a2bQbcyTLCzQ2oHaTAW+suXZ5TcszKblm35gSY61kK0uTP89lRS/6Fv
UF7+SqJwmM4eaqS5KvfkT/8GcOkWpG/iXtoNlIMiTNyMNjWutJ/WpTaUQ34TdwGV
etQjXrmU5xEI1Kow7T+h
=tAiy
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.5/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Two omap fixes for omaps against v4.5-rc5:
- Yet another fix for n900 onenand to avoid corruption. This time to
fix the issue of mounting onenand back and forth between the original
maemo kernel and mainline Linux kernel. And it also seems there will
be two more fixes coming via the MTD tree as issues were discovered
also in the onenand driver during testing.
- Revert tps65217 regulator clean up as it breaks MMC for am335x
variants. The proper way to clean this up is just to rename the
tps65217.dtsi file into tps65217-am335x.dtsi as a similar setup
is used on many am335x boards.
* tag 'omap-for-v4.5/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption
Revert "regulator: tps65217: remove tps65217.dtsi file"
Signed-off-by: Olof Johansson <olof@lixom.net>
Drivers/devices without their own rate control algorithm can get the
information what rates they should use from either the radiotap header of
injected frames or from the rate control algorithm. But the parsing of the
legacy rate information from the radiotap header was removed in commit
e6a9854b05 ("mac80211/drivers: rewrite the rate control API").
The removal of this feature heavily reduced the usefulness of frame
injection when wanting to simulate specific transmission behavior. Having
rate parsing together with MCS rates and retry support allows a fine
grained selection of the tx behavior of injected frames for these kind of
tests.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This was scheduled to be removed in 2012 by:
commit 69c86373c6
Author: florian@mickler.org <florian@mickler.org>
Date: Wed Feb 24 12:05:16 2010 +0100
Document the rfkill sysfs ABI
This moves sysfs ABI info from Documentation/rfkill.txt to the
ABI subfolder and reformats it.
This also schedules the deprecated sysfs parts to be removed in
2012 (claim file) and 2014 (state file).
Signed-off-by: Florian Mickler <florian@mickler.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some qcom based bootloaders identify the dtb blob based on a set
of device properties like SoC, platform, PMIC, and revisions of
those components. In downstream kernels, these values are added
to the different component dtsi files (i.e. pmic dtsi file, SoC
dtsi file, board dtsi file, etc.) via qcom specific DT
properties. The dtb files are parsed by a program called dtbTool
that picks out these properties and creates a table of contents
binary blob with the property information and some offsets into
the concatenation of all the dtbs (termed a QCDT image).
The suggestion is to do this via the board compatible string
instead, because these qcom specific properties are never used by
the kernel. Add a document describing the format of the
compatible string that encodes all this information that's
currently encoded in the qcom,{msm-id,board-id,pmic-id}
properties in downstream devicetrees. Future bootloaders may be
updated to look at the compatible field instead of looking for
the table of contents image. For non-updateable bootloaders, a
new dtbTool program will parse the compatible string and generate
a QCDT image from it.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
ICP DAS LP-8841 contains a DS-1302 RTC. This driver provides an SPI
master which makes the RTC usable. The driver is not supposed to work
with anything else.
The driver uses the standard MicroWire half-duplex transfer timing.
Master output is set on low clock and sensed by the RTC on the rising
edge. Master input is set by the RTC on the trailing edge and is sensed
by the master on low clock.
Signed-off-by: Sergei Ianovich <ynvich@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the MTMKPART operation of the MTIOCTOP ioctl so that it works
also with current drives (LTO-5/6, etc.). Send a separate FORMAT MEDIUM
command if the partition mode page indicates that this is required. Use
LOAD to position the tape at the beginning of tape.
The operation is extended so that if the argument is negative, its
absolute value specifies the size of partition 0, which is the
physically first partition of the tape.
Signed-off-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Tested-by: Shane M Seymour <shane.seymour@hpe.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the dt bindings for HiSi SAS controller v2 HW.
The main difference in the controller from dt perspective is
interrupts. The v2 controller does not have dedicated fatal and
broadcast interrupts - they are multiplexed on the channel interrupt.
Each SAS v2 controller can issue upto 64 commands (or connection
requests) on the system bus without waiting for a response - this is
know as am-max-transmissions. In hip06, sas controller #1 has a
limitation that it has to limit am-max-transmissions to 32 - this
limitation is due to chip system bus design. It is not anticipated that
any future chip incorporating v2 controller will have such a limitation.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Document the compatible string for the Kryo family of qcom cpus.
Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Some DSA drivers may or may not support multiple software bridges on top
of an hardware switch.
It is more convenient for them to access the bridge's net_device for
finer configuration.
Removing the need to craft and access a bitmask also simplifies the
code.
This patch changes the signature of bridge related functions, update DSA
drivers, and removes dsa_slave_br_port_mask.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add following missing devm wrappers in file devrs.txt under
list of managed interfaces.
devm_gpio_request()
devm_gpio_request_one()
devm_gpio_free()
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Document the R8A7795-specific DT bindings and support them in the
driver. The HDMI and LVDS outputs are currently not supported.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Conflicts:
drivers/net/phy/bcm7xxx.c
drivers/net/phy/marvell.c
drivers/net/vxlan.c
All three conflicts were cases of simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds documentation for the DT bindings of the charger
subdevice of ACT8945A MFD.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This patch introduces lifetime IO write statistics exposed to the sysfs interface.
The write IO amount is obtained from block layer, accumulated in the file system and
stored in the hot node summary of checkpoint.
Signed-off-by: Shuoran Liu <liushuoran@huawei.com>
Signed-off-by: Pengyang Hou <houpengyang@huawei.com>
[Jaegeuk Kim: add sysfs documentation]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch exports a new sysfs entry 'dirty_nat_ratio' to control threshold
of dirty nat entries, if current ratio exceeds configured threshold,
checkpoint will be triggered in f2fs_balance_fs_bg for flushing dirty nats.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This resolves the merge issues and confusions people were having with
the goldfish drivers due to changes for them showing up in two different
trees.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking fixes from David Miller:
"Looks like a lot, but mostly driver fixes scattered all over as usual.
Of note:
1) Add conditional sched in nf conntrack in cleanup to avoid NMI
watchdogs. From Florian Westphal.
2) Fix deadlock in nfnetlink cttimeout, also from Floarian.
3) Fix handling of slaves in bonding ARP monitor validation, from Jay
Vosburgh.
4) Callers of ip_cmsg_send() are responsible for freeing IP options,
some were not doing so. Fix from Eric Dumazet.
5) Fix per-cpu bugs in mvneta driver, from Gregory CLEMENT.
6) Fix vlan handling in mv88e6xxx DSA driver, from Vivien Didelot.
7) bcm7xxx PHY driver bug fixes from Florian Fainelli.
8) Avoid unaligned accesses to protocol headers wrt. GRE, from
Alexander Duyck.
9) SKB leaks and other problems in arc_emac driver, from Alexander
Kochetkov.
10) tcp_v4_inbound_md5_hash() releases listener socket instead of
request socket on error path, oops. Fix from Eric Dumazet.
11) Missing socket release in pppoe_rcv_core() that seems to have
existed basically forever. From Guillaume Nault.
12) Missing slave_dev unregister in dsa_slave_create() error path,
from Florian Fainelli.
13) crypto_alloc_hash() never returns NULL, fix return value check in
__tcp_alloc_md5sig_pool. From Insu Yun.
14) Properly expire exception route entries in ipv4, from Xin Long.
15) Fix races in tcp/dccp listener socket dismantle, from Eric
Dumazet.
16) Don't set IFF_TX_SKB_SHARING in vxlan, geneve, or GRE, it's not
legal. These drivers modify the SKB on transmit. From Jiri Benc.
17) Fix regression in the initialziation of netdev->tx_queue_len.
From Phil Sutter.
18) Missing unlock in tipc_nl_add_bc_link() error path, from Insu Yun.
19) SCTP port hash sizing does not properly ensure that table is a
power of two in size. From Neil Horman.
20) Fix initializing of software copy of MAC address in fmvj18x_cs
driver, from Ken Kawasaki"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (129 commits)
bnx2x: Fix 84833 phy command handler
bnx2x: Fix led setting for 84858 phy.
bnx2x: Correct 84858 PHY fw version
bnx2x: Fix 84833 RX CRC
bnx2x: Fix link-forcing for KR2
net: ethernet: davicom: fix devicetree irq resource
fmvj18x_cs: fix incorrect indexing of dev->dev_addr[] when copying the MAC address
Driver: Vmxnet3: Update Rx ring 2 max size
net: netcp: rework the code for get/set sw_data in dma desc
soc: ti: knav_dma: rename pad in struct knav_dma_desc to sw_data
net: ti: netcp: restore get/set_pad_info() functionality
MAINTAINERS: Drop myself as xen netback maintainer
sctp: Fix port hash table size computation
can: ems_usb: Fix possible tx overflow
Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skb
net: bcmgenet: Fix internal PHY link state
af_unix: Don't use continue to re-execute unix_stream_read_generic loop
unix_diag: fix incorrect sign extension in unix_lookup_by_ino
bnxt_en: Failure to update PHY is not fatal condition.
bnxt_en: Remove unnecessary call to update PHY settings.
...
Mark Brown