Commit Graph

150 Commits

Author SHA1 Message Date
Linus Torvalds c5aec4c76a Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Ben Herrenschmidt:
 "Here is the bulk of the powerpc changes for this merge window.  It got
  a bit delayed in part because I wasn't paying attention, and in part
  because I discovered I had a core PCI change without a PCI maintainer
  ack in it.  Bjorn eventually agreed it was ok to merge it though we'll
  probably improve it later and I didn't want to rebase to add his ack.

  There is going to be a bit more next week, essentially fixes that I
  still want to sort through and test.

  The biggest item this time is the support to build the ppc64 LE kernel
  with our new v2 ABI.  We previously supported v2 userspace but the
  kernel itself was a tougher nut to crack.  This is now sorted mostly
  thanks to Anton and Rusty.

  We also have a fairly big series from Cedric that add support for
  64-bit LE zImage boot wrapper.  This was made harder by the fact that
  traditionally our zImage wrapper was always 32-bit, but our new LE
  toolchains don't really support 32-bit anymore (it's somewhat there
  but not really "supported") so we didn't want to rely on it.  This
  meant more churn that just endian fixes.

  This brings some more LE bits as well, such as the ability to run in
  LE mode without a hypervisor (ie. under OPAL firmware) by doing the
  right OPAL call to reinitialize the CPU to take HV interrupts in the
  right mode and the usual pile of endian fixes.

  There's another series from Gavin adding EEH improvements (one day we
  *will* have a release with less than 20 EEH patches, I promise!).

  Another highlight is the support for the "Split core" functionality on
  P8 by Michael.  This allows a P8 core to be split into "sub cores" of
  4 threads which allows the subcores to run different guests under KVM
  (the HW still doesn't support a partition per thread).

  And then the usual misc bits and fixes ..."

[ Further delayed by gmail deciding that BenH is a dirty spammer.
  Google knows.  ]

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (155 commits)
  powerpc/powernv: Add missing include to LPC code
  selftests/powerpc: Test the THP bug we fixed in the previous commit
  powerpc/mm: Check paca psize is up to date for huge mappings
  powerpc/powernv: Pass buffer size to OPAL validate flash call
  powerpc/pseries: hcall functions are exported to modules, need _GLOBAL_TOC()
  powerpc: Exported functions __clear_user and copy_page use r2 so need _GLOBAL_TOC()
  powerpc/powernv: Set memory_block_size_bytes to 256MB
  powerpc: Allow ppc_md platform hook to override memory_block_size_bytes
  powerpc/powernv: Fix endian issues in memory error handling code
  powerpc/eeh: Skip eeh sysfs when eeh is disabled
  powerpc: 64bit sendfile is capped at 2GB
  powerpc/powernv: Provide debugfs access to the LPC bus via OPAL
  powerpc/serial: Use saner flags when creating legacy ports
  powerpc: Add cpu family documentation
  powerpc/xmon: Fix up xmon format strings
  powerpc/powernv: Add calls to support little endian host
  powerpc: Document sysfs DSCR interface
  powerpc: Fix regression of per-CPU DSCR setting
  powerpc: Split __SYSFS_SPRSETUP macro
  arch: powerpc/fadump: Cleaning up inconsistent NULL checks
  ...
2014-06-10 18:54:22 -07:00
Anton Blanchard a5d862576a powerpc: Allow ppc_md platform hook to override memory_block_size_bytes
The pseries platform code unconditionally overrides
memory_block_size_bytes regardless of the running platform.

Create a ppc_md hook that so each platform can choose to
do what it wants.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-05 13:20:39 +10:00
Tony Breeds 983d8a6dda powerpc/le: Show the endianess of the LPAR under PowerVM.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-05-01 08:26:18 +10:00
Rob Herring 9d0c4dfedd of/fdt: update of_get_flat_dt_prop in prep for libfdt
Make of_get_flat_dt_prop arguments compatible with libfdt fdt_getprop
call in preparation to convert FDT code to use libfdt. Make the return
value const and the property length ptr type an int.

Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Stephen Chivers <schivers@csc.com>
2014-04-30 00:59:15 -05:00
Thomas Gleixner d97a860c4f Merge branch 'linus' into sched/core
Reason: Bring bakc upstream modification to resolve conflicts

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-21 21:37:09 +01:00
Nicolas Pitre d8c6ad3184 sched/idle, PPC: Remove redundant cpuidle_idle_call()
The core idle loop now takes care of it.  However a few things need
checking:

- Invocation of cpuidle_idle_call() in pseries_lpar_idle() happened
  through arch_cpu_idle() and was therefore always preceded by a call
  to ppc64_runlatch_off().  To preserve this property now that
  cpuidle_idle_call() is invoked directly from core code, a call to
  ppc64_runlatch_off() has been added to idle_loop_prolog() in
  platforms/pseries/processor_idle.c.

- Similarly, cpuidle_idle_call() was followed by ppc64_runlatch_off()
  so a call to the later has been added to idle_loop_epilog().

- And since arch_cpu_idle() always made sure to re-enable IRQs if they
  were not enabled, this is now
  done in idle_loop_epilog() as well.

The above was made in order to keep the execution flow close to the
original.  I don't know if that was strictly necessary. Someone well
aquainted with the platform details might find some room for possible
optimizations.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-sh@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linaro-kernel@lists.linaro.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-47o4m03citrfg9y1vxic5asb@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-11 09:58:24 +01:00
Mahesh Salgaonkar 3ec8b78fcc powerpc/pseries: Disable relocation on exception while going down during crash.
Disable relocation on exception while going down even in kdump case. This
is because we are about clear htab mappings while kexec-ing into kdump
kernel and we may run into issues if we still have AIL ON.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-11 11:24:47 +11:00
Linus Torvalds 1b17366d69 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Ben Herrenschmidt:
 "So here's my next branch for powerpc.  A bit late as I was on vacation
  last week.  It's mostly the same stuff that was in next already, I
  just added two patches today which are the wiring up of lockref for
  powerpc, which for some reason fell through the cracks last time and
  is trivial.

  The highlights are, in addition to a bunch of bug fixes:

   - Reworked Machine Check handling on kernels running without a
     hypervisor (or acting as a hypervisor).  Provides hooks to handle
     some errors in real mode such as TLB errors, handle SLB errors,
     etc...

   - Support for retrieving memory error information from the service
     processor on IBM servers running without a hypervisor and routing
     them to the memory poison infrastructure.

   - _PAGE_NUMA support on server processors

   - 32-bit BookE relocatable kernel support

   - FSL e6500 hardware tablewalk support

   - A bunch of new/revived board support

   - FSL e6500 deeper idle states and altivec powerdown support

  You'll notice a generic mm change here, it has been acked by the
  relevant authorities and is a pre-req for our _PAGE_NUMA support"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (121 commits)
  powerpc: Implement arch_spin_is_locked() using arch_spin_value_unlocked()
  powerpc: Add support for the optimised lockref implementation
  powerpc/powernv: Call OPAL sync before kexec'ing
  powerpc/eeh: Escalate error on non-existing PE
  powerpc/eeh: Handle multiple EEH errors
  powerpc: Fix transactional FP/VMX/VSX unavailable handlers
  powerpc: Don't corrupt transactional state when using FP/VMX in kernel
  powerpc: Reclaim two unused thread_info flag bits
  powerpc: Fix races with irq_work
  Move precessing of MCE queued event out from syscall exit path.
  pseries/cpuidle: Remove redundant call to ppc64_runlatch_off() in cpu idle routines
  powerpc: Make add_system_ram_resources() __init
  powerpc: add SATA_MV to ppc64_defconfig
  powerpc/powernv: Increase candidate fw image size
  powerpc: Add debug checks to catch invalid cpu-to-node mappings
  powerpc: Fix the setup of CPU-to-Node mappings during CPU online
  powerpc/iommu: Don't detach device without IOMMU group
  powerpc/eeh: Hotplug improvement
  powerpc/eeh: Call opal_pci_reinit() on powernv for restoring config space
  powerpc/eeh: Add restore_config operation
  ...
2014-01-27 21:11:26 -08:00
Alistair Popple e589a4404f powerpc/iommu: Update constant names to reflect their hardcoded page size
The powerpc iommu uses a hardcoded page size of 4K. This patch changes
the name of the IOMMU_PAGE_* macros to reflect the hardcoded values. A
future patch will use the existing names to support dynamic page
sizes.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30 14:17:06 +11:00
Jason Baron b71d47c14f powerpc: Clean up panic_timeout usage
Default CONFIG_PANIC_TIMEOUT to 180 seconds on powerpc. The
pSeries continue to set the timeout to 10 seconds at run-time.

Thus, there's a small window where we don't have the correct
value on pSeries, but if this is only run-time discoverable we
don't have a better option. In any case, if the user changes the
default setting of 180 seconds, we honor that user setting.

Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: benh@kernel.crashing.org
Cc: paulus@samba.org
Cc: ralf@linux-mips.org
Cc: mpe@ellerman.id.au
Cc: felipe.contreras@gmail.com
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/705bbe0f70fb20759151642ba0176a6414ec9f7a.1385418410.git.jbaron@akamai.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-26 12:12:28 +01:00
Anton Blanchard e844b1eeae pseries: Add H_SET_MODE to change exception endianness
On little endian builds call H_SET_MODE so exceptions have the
correct endianness. We need to reset the endian during kexec
so do that in the MMU hashtable clear callback.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 09:19:16 +11:00
Vaidyanathan Srinivasan 363edbe261 powerpc: Default arch idle could cede processor on pseries
When adding cpuidle support to pSeries, we introduced two
regressions:

  - The new cpuidle backend driver only works under hypervisors
    supporting the "SLPLAR" option, which isn't the case of the
    old POWER4 hypervisor and the HV "light" used on js2x blades

  - The cpuidle driver registers fairly late, meaning that for
    a significant portion of the boot process, we end up having
    all threads spinning. This slows down the boot process and
    increases the overall resource usage if the hypervisor has
    shared processors.

This fixes both by implementing a "default" idle that will cede
to the hypervisor when possible, in a very simple way without
all the bells and whisles of cpuidle.

Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org>
2013-09-11 11:41:54 +10:00
Deepthi Dharwar 212bebb409 pseries: Move plpar_wrapper.h to powerpc common include/asm location.
As a part of pseries_idle backend driver cleanup to make
the code common to both pseries and powernv platforms, it
is necessary to move the backend-driver code to drivers/cpuidle.

As a pre-requisite for that, it is essential to move plpar_wrapper.h
to include/asm.

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-27 14:43:05 +10:00
Anton Blanchard 7ffcf8ec26 powerpc: Fix little endian lppaca, slb_shadow and dtl_entry
The lppaca, slb_shadow and dtl_entry hypervisor structures are
big endian, so we have to byte swap them in little endian builds.

LE KVM hosts will also need to be fixed but for now add an #error
to remind us.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 15:33:35 +10:00
Anton Blanchard b0d436c739 powerpc: Fix a number of sparse warnings
Address some of the trivial sparse warnings in arch/powerpc.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 11:50:24 +10:00
Kleber Sacilotto de Souza d82fb31abc powerpc/pseries: Perform proper max_bus_speed detection
On pseries machines the detection for max_bus_speed should be done
through an OpenFirmware property. This patch adds a function to perform
this detection and a hook to perform dynamic adding of the function only
for pseries. This is done by overwriting the weak
pcibios_root_bridge_prepare function which is called by
pci_create_root_bus().

From: Lucas Kannebley Tavares <lucaskt@linux.vnet.ibm.com>
Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-06 09:25:38 +10:00
Nathan Fontenot f0ff7eb483 powerpc/pseries: Update firmware_has_feature() to check architecture vector 5 bits
The firmware_has_feature() function makes it easy to check for supported
features of the hypervisor. This patch extends the capability of
firmware_has_feature() to include checking for specified bits
in vector 5 of the architecture vector as reported in the device tree.

As part of this the #defines used for the architecture vector are re-defined
such that each option has the index into vector 5 and the feature bit encoded
into it. This makes checking for architecture bits when initiating data
for firmware_has_feature much easier.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-26 16:08:22 +10:00
Linus Torvalds 9d3cae26ac Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Benjamin Herrenschmidt:
 "So from the depth of frozen Minnesota, here's the powerpc pull request
  for 3.9.  It has a few interesting highlights, in addition to the
  usual bunch of bug fixes, minor updates, embedded device tree updates
  and new boards:

   - Hand tuned asm implementation of SHA1 (by Paulus & Michael
     Ellerman)

   - Support for Doorbell interrupts on Power8 (kind of fast
     thread-thread IPIs) by Ian Munsie

   - Long overdue cleanup of the way we handle relocation of our open
     firmware trampoline (prom_init.c) on 64-bit by Anton Blanchard

   - Support for saving/restoring & context switching the PPR (Processor
     Priority Register) on server processors that support it.  This
     allows the kernel to preserve thread priorities established by
     userspace.  By Haren Myneni.

   - DAWR (new watchpoint facility) support on Power8 by Michael Neuling

   - Ability to change the DSCR (Data Stream Control Register) which
     controls cache prefetching on a running process via ptrace by
     Alexey Kardashevskiy

   - Support for context switching the TAR register on Power8 (new
     branch target register meant to be used by some new specific
     userspace perf event interrupt facility which is yet to be enabled)
     by Ian Munsie.

   - Improve preservation of the CFAR register (which captures the
     origin of a branch) on various exception conditions by Paulus.

   - Move the Bestcomm DMA driver from arch powerpc to drivers/dma where
     it belongs by Philippe De Muyter

   - Support for Transactional Memory on Power8 by Michael Neuling
     (based on original work by Matt Evans).  For those curious about
     the feature, the patch contains a pretty good description."

(See commit db8ff907027b: "powerpc: Documentation for transactional
memory on powerpc" for the mentioned description added to the file
Documentation/powerpc/transactional_memory.txt)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (140 commits)
  powerpc/kexec: Disable hard IRQ before kexec
  powerpc/85xx: l2sram - Add compatible string for BSC9131 platform
  powerpc/85xx: bsc9131 - Correct typo in SDHC device node
  powerpc/e500/qemu-e500: enable coreint
  powerpc/mpic: allow coreint to be determined by MPIC version
  powerpc/fsl_pci: Store the pci ctlr device ptr in the pci ctlr struct
  powerpc/85xx: Board support for ppa8548
  powerpc/fsl: remove extraneous DIU platform functions
  arch/powerpc/platforms/85xx/p1022_ds.c: adjust duplicate test
  powerpc: Documentation for transactional memory on powerpc
  powerpc: Add transactional memory to pseries and ppc64 defconfigs
  powerpc: Add config option for transactional memory
  powerpc: Add transactional memory to POWER8 cpu features
  powerpc: Add new transactional memory state to the signal context
  powerpc: Hook in new transactional memory code
  powerpc: Routines for FP/VSX/VMX unavailable during a transaction
  powerpc: Add transactional memory unavaliable execption handler
  powerpc: Add reclaim and recheckpoint functions for context switching transactional memory processes
  powerpc: Add FP/VSX and VMX register load functions for transactional memory
  powerpc: Add helper functions for transactional memory context switching
  ...
2013-02-23 17:09:55 -08:00
Frederic Weisbecker abf917cd91 cputime: Generic on-demand virtual cputime accounting
If we want to stop the tick further idle, we need to be
able to account the cputime without using the tick.

Virtual based cputime accounting solves that problem by
hooking into kernel/user boundaries.

However implementing CONFIG_VIRT_CPU_ACCOUNTING require
low level hooks and involves more overhead. But we already
have a generic context tracking subsystem that is required
for RCU needs by archs which plan to shut down the tick
outside idle.

This patch implements a generic virtual based cputime
accounting that relies on these generic kernel/user hooks.

There are some upsides of doing this:

- This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING
if context tracking is already built (already necessary for RCU in full
tickless mode).

- We can rely on the generic context tracking subsystem to dynamically
(de)activate the hooks, so that we can switch anytime between virtual
and tick based accounting. This way we don't have the overhead
of the virtual accounting when the tick is running periodically.

And one downside:

- There is probably more overhead than a native virtual based cputime
accounting. But this relies on hooks that are already set anyway.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
2013-01-27 19:23:27 +01:00
Michael Neuling bf99de36e4 powerpc: Add the DAWR support to the set_break()
This adds DAWR supoprt to the set_break().

It does both bare metal and PAPR versions of setting the DAWR.

There is still some work we can do to make full use of the watchpoint but that
will come later.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-10 17:01:47 +11:00
Ian Munsie a413f474a0 powerpc: Disable relocation on exceptions whenever PR KVM is active
For PR KVM we allow userspace to map 0xc000000000000000. Because
transitioning from userspace to the guest kernel may use the relocated
exception vectors we have to disable relocation on exceptions whenever
PR KVM is active as we cannot trust that address.

This issue does not apply to HV KVM, since changing from a guest to the
hypervisor will never use the relocated exception vectors.

Currently the hypervisor interface only allows us to toggle relocation
on exceptions on a partition wide scope, so we need to globally disable
relocation on exceptions when the first PR KVM instance is started and
only re-enable them when all PR KVM instances have been destroyed.

It's a bit heavy handed, but until the hypervisor gives us a lightweight
way to toggle relocation on exceptions on a single thread it's only real
option.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-10 17:00:42 +11:00
Ian Munsie cedddd812a powerpc: Disable relocation on exceptions when kexecing
Since we don't know if they new kernel we are kexecing into has been
built to support relocation on exceptions, we disable them before we
kexec.

We do NOT disable them if we are execing a kdump kernel, because we
want to change as little state as possible and it is likely that we are
execing ourselves and will be able to handle them anyway.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 15:08:08 +11:00
Ian Munsie fc8effa4e4 powerpc: Enable relocation on during exceptions at boot
We currently do this synchronously at boot from setup_arch. On a large
system this could hypothetically take a little while to complete, so
currently we will give up if we are asked to wait for more than a second
in total.

If we actually start hitting that timeout in practice we can always move
this code into a kernel thread to take care of it in the background.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 15:08:08 +11:00
Nathan Fontenot 1cf3d8b3d2 powerpc+of: Add of node/property notification chain for adds and removes
This patch moves the notification chain for updates to the device tree
from the powerpc/pseries code to the base OF code. This makes this
functionality available to all architectures.

Additionally the notification chain is updated to allow notifications
for property add/remove/update. To make this work a pointer to a new
struct (of_prop_reconfig) is passed to the routines in the notification chain.
The of_prop_reconfig property contains a pointer to the node containing the
property and a pointer to the property itself. In the case of property
updates, the property pointer refers to the new property.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 12:56:41 +11:00
Michael Neuling cd14457304 powerpc: Dynamically calculate the dabrx based on kernel/user/hypervisor
Currently we mark the DABRX to interrupt on all matches
(hypervisor/kernel/user and then filter in software.  We can be a lot
smarter now that we can set the DABRX dynamically.

This sets the DABRX based on the flags passed by the user.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10 09:59:13 +10:00
Michael Neuling 4474ef055c powerpc: Rework set_dabr so it can take a DABRX value as well
Rework set_dabr to take a DABRX value as well.

Both the pseries and PS3 hypervisors do some checks on the DABRX
values that are passed in the hcall.  This patch stops bogus values
from being passed to hypervisor.  Also, in the case where we are
clearing the breakpoint, where DABR and DABRX are zero, we modify the
DABRX value to make it valid so that the hcall won't fail.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10 09:59:10 +10:00
Gavin Shan 35e5cfe27e powerpc/eeh: Move EEH initialization around
Currently, we have 3 phases for EEH initialization on pSeries platform.
All of them are done through builtin functions: platform initialization,
EEH device creation, and EEH subsystem enablement. All of them are done
no later than ppc_md.setup_arch. That means that the slab/slub isn't ready
yet, so we have to allocate memory chunks on basis of PAGE_SIZE for those
dynamically created EEH devices. That's pretty expensive.

In order to utilize slab/slub for memory allocation, we have to move the EEH
initialization functions around, but all of them should be called after slab
is ready.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-10 09:35:27 +10:00
Michael Neuling 06c8876668 powerpc: Use the XDABR hcall
We never use the XDABR hcall since we check for DABR hcall first.
XDABR syscall is better since it allows us to also set the DABRX.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-07 11:44:42 +10:00
Linus Torvalds 475c77edf8 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci
Pull PCI changes (including maintainer change) from Jesse Barnes:
 "This pull has some good cleanups from Bjorn and Yinghai, as well as
  some more code from Yinghai to better handle resource re-allocation
  when enabled.

  There's also a new initcall_debug feature from Arjan which will print
  out quirk timing information to help identify slow quirks for fixing
  or refinement (Yinghai sent in a few patches to do just that once the
  new debug code landed).

  Beyond that, I'm handing off PCI maintainership to Bjorn Helgaas.
  He's been a core PCI and Linux contributor for some time now, and has
  kindly volunteered to take over.  I just don't feel I have the time
  for PCI review and work that it deserves lately (I've taken on some
  other projects), and haven't been as responsive lately as I'd like, so
  I approached Bjorn asking if he'd like to manage things.  He's going
  to give it a try, and I'm confident he'll do at least as well as I
  have in keeping the tree managed, patches flowing, and keeping things
  stable."

Fix up some fairly trivial conflicts due to other cleanups (mips device
resource fixup cleanups clashing with list handling cleanup, ppc iseries
removal clashing with pci_probe_only cleanup etc)

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (112 commits)
  PCI: Bjorn gets PCI hotplug too
  PCI: hand PCI maintenance over to Bjorn Helgaas
  unicore32/PCI: move <asm-generic/pci-bridge.h> include to asm/pci.h
  sparc/PCI: convert devtree and arch-probed bus addresses to resource
  powerpc/PCI: allow reallocation on PA Semi
  powerpc/PCI: convert devtree bus addresses to resource
  powerpc/PCI: compute I/O space bus-to-resource offset consistently
  arm/PCI: don't export pci_flags
  PCI: fix bridge I/O window bus-to-resource conversion
  x86/PCI: add spinlock held check to 'pcibios_fwaddrmap_lookup()'
  PCI / PCIe: Introduce command line option to disable ARI
  PCI: make acpihp use __pci_remove_bus_device instead
  PCI: export __pci_remove_bus_device
  PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge
  PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device
  PCI: print out PCI device info along with duration
  PCI: Move "pci reassigndev resource alignment" out of quirks.c
  PCI: Use class for quirk for usb host controller fixup
  PCI: Use class for quirk for ti816x class fixup
  PCI: Use class for quirk for intel e100 interrupt fixup
  ...
2012-03-23 14:02:12 -07:00
Gavin Shan eb740b5f3e powerpc/eeh: Introduce EEH device
Original EEH implementation depends on struct pci_dn heavily. However,
EEH shouldn't depend on that actually because EEH needn't share much
information with other PCI components. That's to say, EEH should have
worked independently.

The patch introduces struct eeh_dev so that EEH core components needn't
be working based on struct pci_dn in future. Also, struct pci_dn, struct
eeh_dev instances are created in dynamic fasion and the binding with EEH
device, OF node, PCI device is implemented as well.

The EEH devices are created after PHBs are detected and initialized, but
PCI emunation hasn't started yet. Apart from that, PHB might be created
dynamically through DLPAR component and the EEH devices should be creatd
as well. Another case might be OF node is created dynamically by DR
(Dynamic Reconfiguration), which has been defined by PAPR. For those OF
nodes created by DR, EEH devices should be also created accordingly. The
binding between EEH device and OF node is done while the EEH device is
initially created.

The binding between EEH device and PCI device should be done after PCI
emunation is done. Besides, PCI hotplug also needs the binding so that
the EEH devices could be traced from the newly coming PCI buses or PCI
devices.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-03-09 11:39:29 +11:00
Gavin Shan aa1e6374ae powerpc/eeh: Platform dependent EEH operations
EEH has been implemented on RTAS-compliant pSeries platform.
That's to say, the EEH operations will be implemented through RTAS
calls eventually. The situation limited feasible extension on EEH.
In order to support EEH on multiple platforms like pseries and powernv
simutaneously. We have to split the platform dependent EEH options
up out of current implementation.

The patch addresses supporting EEH on multiple platforms. The pseries
platform dependent EEH operations will be abstracted by struct eeh_ops.
EEH core components will be built based on the registered EEH operations.
With the mechanism, what the individual platform needs to do is implement
platform dependent EEH operations.

For now, the pseries platform is covered under the mechanism. That means
we have to think about other platforms to support EEH, like powernv.
Besides, we only have framework for the mechanism and we have to implement
it for pseries platform later.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-03-09 11:08:54 +11:00
Bjorn Helgaas 673c975624 powerpc/PCI: replace pci_probe_only with pci_flags
We already use pci_flags, so this just sets pci_flags directly and removes
the intermediate step of figuring out pci_probe_only, then using it to set
pci_flags.

The PCI core provides a pci_flags definition (currently __weak), so drop
the powerpc definitions in favor of that.

CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-23 20:18:58 -07:00
Bjorn Helgaas 3c13be017a powerpc/PCI: make pci_probe_only default to 0
pci_probe_only is set on ppc64 to prevent resource re-allocation
by the core. It's meant to be used in very specific circumstances
such as when operating under a hypervisor that may prevent such
re-allocation.

Instead of default to 1, we make it default to 0 and explicitly
set it in the few cases where we need it.

This fixes FSL PCI which wants it clear among others.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-23 20:18:58 -07:00
Kyle Moffett e55d7f737d powerpc/mpic: Remove duplicate MPIC_WANTS_RESET flag
There are two separate flags controlling whether or not the MPIC is
reset during initialization, which is completely unnecessary, and only
one of them can be specified in the device tree.

Also, most platforms in-tree right now do actually want to reset the
MPIC during initialization anyways, which means lots of duplicate code
passing the MPIC_WANTS_RESET flag.

Fix all of the callers which currently do not pass the MPIC_WANTS_RESET
flag to pass the MPIC_NO_RESET flag, then remove the MPIC_WANTS_RESET
flag and make the code reset the MPIC by default.

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-23 10:50:00 +11:00
Kyle Moffett 5019609fce powerpc/mpic: Remove MPIC_BROKEN_FRR_NIRQS and duplicate irq_count
The mpic->irq_count variable is only used as a software error-checking
limit to determine whether or not an IRQ number is valid.  In board code
which does not manually specify an IRQ count to mpic_alloc(), i.e. 0, it
is automatically detected from the number of ISUs and the ISU size.

In practice, all hardware ends up with irq_count == num_sources, so all
of the runtime checks on mpic->irq_count should just check the value of
mpic->num_sources instead.

When platform hardware does not correctly report the number of IRQs,
which only happens on the MPC85xx/MPC86xx, the MPIC_BROKEN_FRR_NIRQS
flag is used to override the detected value of num_sources with the
manual irq_count parameter.  Since there's no need to manually specify
the number of IRQs except in this case, the extra flag can be eliminated
and the test changed to "irq_count != 0".

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-23 10:49:59 +11:00
Benjamin Herrenschmidt 43ca5d347a Merge branch 'kexec' into next 2011-12-16 11:09:21 +11:00
Anton Blanchard a934904d8a powerpc: Reduce pseries panic timeout from 180s to 10s
We've had a 180 second panic timeout on ppc64 for as long as I
can remember. This patch reduces it to 10 seconds on pseries for a few
reasons:

- Almost all pseries machines have a hypervisor console so panic
  output will be available in a scrollback buffer.

- The 180 seconds impacts our availability, users (other than
  kernel hackers) just want the box to come back around so it
  can continue its work.

- I spend a lot of my life staring at the 180 second panic timeout.
  Many pseries machines take minutes to power cycle, so it's quicker
  to sit through the 180 seconds than it is to power cycle.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-08 14:02:23 +11:00
Deepthi Dharwar e179816ce6 powerpc/cpuidle: Enable cpuidle and directly call cpuidle_idle_call() for pSeries
This patch enables cpuidle for pSeries and pSeries_idle is
directly called from the idle loop. As a result of pSeries_idle, cpuidle
driver registered with cpuidle subsystem comes into action. On
failure of loading of the driver or cpuidle framework default idle
is executed as part of the function. This patch
also removes the routines pseries_shared_idle_sleep and
pseries_dedicated_idle_sleep as they are now implemented as part of
pseries_idle cpuidle driver.

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com>
Signed-off-by: Arun R Bharadwaj <arun.r.bharadwaj@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-08 13:57:20 +11:00
Deepthi Dharwar 707827f338 powerpc/cpuidle: cpuidle driver for pSeries
This patch implements a back-end cpuidle driver for pSeries
based on pseries_dedicated_idle_loop and pseries_shared_idle_loop
routines.  The driver is built only if CONFIG_CPU_IDLE is set. This
cpuidle driver uses global registration of idle states and
not per-cpu.

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com>
Signed-off-by: Arun R Bharadwaj <arun.r.bharadwaj@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-08 13:56:31 +11:00
Kyle Moffett be8bec56df powerpc/mpic: Invert the meaning of MPIC_PRIMARY
It turns out that there are only 2 in-tree platforms which use MPICs
which are not "primary":  IBM Cell and PowerMac.  To reduce the
complexity of the typical board setup code, invert the MPIC_PRIMARY bit
into MPIC_SECONDARY.

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-07 13:43:08 +11:00
Paul Gortmaker 4b16f8e2d6 powerpc: various straight conversions from module.h --> export.h
All these files were including module.h just for the basic
EXPORT_SYMBOL infrastructure.  We can shift them off to the
export.h header which is a way smaller footprint and thus
realize some compile time gains.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:30:44 -04:00
Anton Blanchard 711ef84e80 powerpc/pseries: Cleanup VPA registration and deregistration errors
Make the VPA, SLB shadow and DTL registration and deregistration
functions print consistent messages on error. I needed the firmware
error code while chasing a kexec bug but we weren't printing it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-05 14:47:57 +10:00
Benjamin Herrenschmidt 4d2bb3f500 powerpc/pseries: Re-implement HVSI as part of hvc_vio
On pseries machines, consoles are provided by the hypervisor using
a low level get_chars/put_chars type interface. However, this is
really just a transport to the service processor which implements
them either as "raw" console (networked consoles, HMC, ...) or as
"hvsi" serial ports.

The later is a simple packet protocol on top of the raw character
interface that is supposed to convey additional "serial port" style
semantics. In practice however, all it does is provide a way to
read the CD line and set/clear our DTR line, that's it.

We currently implement the "raw" protocol as an hvc console backend
(/dev/hvcN) and the "hvsi" protocol using a separate tty driver
(/dev/hvsi0).

However this is quite impractical. The arbitrary difference between
the two type of devices has been a major source of user (and distro)
confusion. Additionally, there's an additional mini -hvsi implementation
in the pseries platform code for our low level debug console and early
boot kernel messages, which means code duplication, though that low
level variant is impractical as it's incapable of doing the initial
protocol negociation to establish the link to the FSP.

This essentially replaces the dedicated hvsi driver and the platform
udbg code completely by extending the existing hvc_vio backend used
in "raw" mode so that:

 - It now supports HVSI as well
 - We add support for hvc backend providing tiocm{get,set}
 - It also provides a udbg interface for early debug and boot console

This is overall less code, though this will only be obvious once we
remove the old "hvsi" driver, which is still available for now. When
the old driver is enabled, the new code still kicks in for the low
level udbg console, replacing the old mini implementation in the platform
code, it just doesn't provide the higher level "hvc" interface.

In addition to producing generally simler code, this has several benefits
over our current situation:

 - The user/distro only has to deal with /dev/hvcN for the hypervisor
console, avoiding all sort of confusion that has plagued us in the past

 - The tty, kernel and low level debug console all use the same code
base which supports the full protocol establishment process, thus the
console is now available much earlier than it used to be with the
old HVSI driver. The kernel console works much earlier and udbg is
available much earlier too. Hackers can enable a hard coded very-early
debug console as well that works with HVSI (previously that was only
supported for the "raw" mode).

I've tried to keep the same semantics as hvsi relative to how I react
to things like CD changes, with some subtle differences though:

 - I clear DTR on close if HUPCL is set

 - Current hvsi triggers a hangup if it detects a up->down transition
   on CD (you can still open a console with CD down). My new implementation
   triggers a hangup if the link to the FSP is severed, and severs it upon
   detecting a up->down transition on CD.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29 17:48:35 +10:00
Nishanth Aravamudan af442a1baa powerpc: Ensure dtl buffers do not cross 4k boundary
Future releases of fimrware will enforce a requirement that DTL buffers
do not cross a 4k boundary. Commit
127493d5dc satisfies this requirement for
CONFIG_VIRT_CPU_ACCOUNTING=y kernels, but if !CONFIG_VIRT_CPU_ACCOUNTING
&& CONFIG_DTL=y, the current code will fail at dtl registration time.
Fix this by making the kmem cache from
127493d5dc visible outside of setup.c and
using the same cache in both dtl.c and setup.c. This requires a bit of
reorganization to ensure ordering of the kmem cache and buffer
allocations.

Note: Since firmware now limits the size of the buffer, I made
dtl_buf_entries read-only in debugfs.

Tested with upcoming firmware with the 4 combinations of
CONFIG_VIRT_CPU_ACCOUNTING and CONFIG_DTL.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:41 +10:00
Brian King 9ee820fa00 powerpc/pseries: Add page coalescing support
Adds support for page coalescing, which is a feature on IBM Power servers
which allows for coalescing identical pages between logical partitions.
Hint text pages as coalesce candidates, since they are the most likely
pages to be able to be coalesced between partitions. This patch also
exports some page coalescing statistics available from firmware via
lparcfg.

[BenH: Moved a couple of things around to fix compile problems]

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-04 16:02:21 +10:00
Benjamin Herrenschmidt 0b05ac6e24 powerpc/xics: Rewrite XICS driver
This is a significant rework of the XICS driver, too significant to
conveniently break it up into a series of smaller patches to be honest.

The driver is moved to a more generic location to allow new platforms
to use it, and is broken up into separate ICP and ICS "backends". For
now we have the native and "hypervisor" ICP backends and one common
RTAS ICS backend.

The driver supports one ICP backend instanciation, and many ICS ones,
in order to accomodate future platforms with multiple possibly different
interrupt "sources" mechanisms.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-20 11:02:35 +10:00
Nishanth Aravamudan 127493d5dc powerpc/pseries: Use a kmem cache for DTL buffers
PAPR specifies that DTL buffers can not cross AMS environments (aka CMO
in the PAPR) and can not cross a memory entitlement granule boundary
(4k). This is found in section 14.11.3.2 H_REGISTER_VPA of the PAPR.
kmalloc does not guarantee an alignment of the allocation, though,
beyond 8 bytes (at least in my understanding). Create a special kmem
cache for DTL buffers with the alignment requirement.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-18 13:08:08 +10:00
Benjamin Herrenschmidt f86d6b9b36 powerpc/pseries: Don't register global initcall
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-05 16:22:11 +10:00
Thomas Gleixner ec775d0e70 powerpc: Convert to new irq_* function names
Scripted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:12 +02:00
Lennert Buytenhek 79f26c268e powerpc: platforms/pseries irq_data conversion.
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10 11:04:01 +11:00