Pull i2c fixes from Wolfram Sang:
- a bigger fix for i801 to finally be able to be loaded on some
machines again
- smaller driver fixes
- documentation update because of a renamed file
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mux: reg: Provide of_match_table
i2c: mux: refer to i2c-mux.txt
i2c: octeon: Avoid printk after too long SMBUS message
i2c: octeon: Missing AAK flag in case of I2C_M_RECV_LEN
i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
- Fix unflatten_dt_nodes when dad parameter is set.
- Add vendor prefixes for TechNexion and UniWest
- Documentation fix for Marvell BT
- OF IRQ kerneldoc fixes
- Restrict CMA alignment adjustments to non dma-coherent
- Couple of warning fixes in reserved-memory code
- DT maintainers updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rXx9
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree fixes from Rob Herring:
- fix unflatten_dt_nodes when dad parameter is set.
- add vendor prefixes for TechNexion and UniWest
- documentation fix for Marvell BT
- OF IRQ kerneldoc fixes
- restrict CMA alignment adjustments to non dma-coherent
- a couple of warning fixes in reserved-memory code
- DT maintainers updates
* tag 'devicetree-fixes-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
drivers: of: add definition of early_init_dt_alloc_reserved_memory_arch
drivers/of: Fix depth for sub-tree blob in unflatten_dt_nodes()
drivers: of: Fix of_pci.h header guard
dt-bindings: Add vendor prefix for TechNexion
of: add vendor prefix for UniWest
dt: bindings: fix documentation for MARVELL's bt-sd8xxx wireless device
of: add missing const for of_parse_phandle_with_args() in !CONFIG_OF
of: silence warnings due to max() usage
drivers: of: of_reserved_mem: fixup the CMA alignment not to affect dma-coherent
of: irq: fix of_irq_get[_byname]() kernel-doc
MAINTAINERS: DeviceTree maintainer updates
Correct references to i2c-mux.txt which was previously mux.txt.
Also correct the spelling of relevant.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Document the compatible for INA231 sensor.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Pull key handling update from James Morris:
"This alters a new keyctl function added in the current merge window to
allow for a future extension planned for the next merge window"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
KEYS: Add placeholder for KDF usage with DH
The /dev/ptmx device node is changed to lookup the directory entry "pts"
in the same directory as the /dev/ptmx device node was opened in. If
there is a "pts" entry and that entry is a devpts filesystem /dev/ptmx
uses that filesystem. Otherwise the open of /dev/ptmx fails.
The DEVPTS_MULTIPLE_INSTANCES configuration option is removed, so that
userspace can now safely depend on each mount of devpts creating a new
instance of the filesystem.
Each mount of devpts is now a separate and equal filesystem.
Reserved ttys are now available to all instances of devpts where the
mounter is in the initial mount namespace.
A new vfs helper path_pts is introduced that finds a directory entry
named "pts" in the directory of the passed in path, and changes the
passed in path to point to it. The helper path_pts uses a function
path_parent_directory that was factored out of follow_dotdot.
In the implementation of devpts:
- devpts_mnt is killed as it is no longer meaningful if all mounts of
devpts are equal.
- pts_sb_from_inode is replaced by just inode->i_sb as all cached
inodes in the tty layer are now from the devpts filesystem.
- devpts_add_ref is rolled into the new function devpts_ptmx. And the
unnecessary inode hold is removed.
- devpts_del_ref is renamed devpts_release and reduced to just a
deacrivate_super.
- The newinstance mount option continues to be accepted but is now
ignored.
In devpts_fs.h definitions for when !CONFIG_UNIX98_PTYS are removed as
they are never used.
Documentation/filesystems/devices.txt is updated to describe the current
situation.
This has been verified to work properly on openwrt-15.05, centos5,
centos6, centos7, debian-6.0.2, debian-7.9, debian-8.2, ubuntu-14.04.3,
ubuntu-15.10, fedora23, magia-5, mint-17.3, opensuse-42.1,
slackware-14.1, gentoo-20151225 (13.0?), archlinux-2015-12-01. With the
caveat that on centos6 and on slackware-14.1 that there wind up being
two instances of the devpts filesystem mounted on /dev/pts, the lower
copy does not end up getting used.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg KH <greg@kroah.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Jann Horn <jann@thejh.net>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull drm fixes from Dave Airlie:
"A bunch of ARM drivers got into the fixes vibe this time around, so
this contains a bunch of fixes for imx, atmel hlcdc, arm hdlcd (only
so many combos of hlcd), mediatek and omap drm.
Other than that there is one mgag200 fix and a few core drm regression
fixes"
* tag 'drm-fixes-for-v4.7-rc2' of git://people.freedesktop.org/~airlied/linux: (34 commits)
drm/omap: fix unused variable warning.
drm: hdlcd: Add information about the underlying framebuffers in debugfs
drm: hdlcd: Cleanup the atomic plane operations
drm/hdlcd: Fix up crtc_state->event handling
drm: hdlcd: Revamp runtime power management
drm/mediatek: mtk_dsi: Remove spurious drm_connector_unregister
drm/mediatek: mtk_dpi: remove invalid error message
drm: atmel-hlcdc: fix a NULL check
drm: atmel-hlcdc: fix atmel_hlcdc_crtc_reset() implementation
drm/mgag200: Black screen fix for G200e rev 4
drm: Wrap direct calls to driver->gem_free_object from CMA
drm: fix fb refcount issue with atomic modesetting
drm: make drm_atomic_set_mode_prop_for_crtc() more reliable
drm/sti: remove extra mode fixup
drm: add missing drm_mode_set_crtcinfo call
drm/omap: include gpio/consumer.h where needed
drm/omap: include linux/seq_file.h where needed
Revert "drm/omap: no need to select OMAP2_DSS"
drm/omap: Remove regulator API abuse
OMAPDSS: HDMI5: Change DDC timings
...
Merge various fixes from Andrew Morton:
"10 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, page_alloc: recalculate the preferred zoneref if the context can ignore memory policies
mm, page_alloc: reset zonelist iterator after resetting fair zone allocation policy
mm, oom_reaper: do not use siglock in try_oom_reaper()
mm, page_alloc: prevent infinite loop in buffered_rmqueue()
checkpatch: reduce git commit description style false positives
mm/z3fold.c: avoid modifying HEADLESS page and minor cleanup
memcg: add RCU locking around css_for_each_descendant_pre() in memcg_offline_kmem()
mm: check the return value of lookup_page_ext for all call sites
kdump: fix dmesg gdbmacro to work with record based printk
mm: fix overflow in vm_map_ram()
Pull irq fixes from Thomas Gleixner:
- a few simple fixes for fallout from the recent gic-v3 changes
- a workaround for a Cavium thunderX erratum
- a bugfix for the pic32 irqchip to make external interrupts work proper
- a missing return value in the generic IPI management code
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-pic32-evic: Fix bug with external interrupts.
irqchip/gicv3-its: numa: Enable workaround for Cavium thunderx erratum 23144
irqchip/gic-v3: Fix quiescence check in gic_enable_redist
irqchip/gic-v3: Fix copy+paste mistakes in defines
irqchip/gic-v3: Fix ICC_SGI1R_EL1.INTID decoding mask
genirq: Fix missing return value in irq_destroy_ipi()
Commit 7ff9554bb5 ("printk: convert byte-buffer to variable-length
record buffer") introduced a record based printk buffer. Modify
gdbmacros.txt to parse this new structure so dmesg will work properly.
Link: http://lkml.kernel.org/r/1463515794-1599-1-git-send-email-minyard@acm.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
United Western Technologies Corp, known primarily as UniWest,
is a manufacturer of eddy current and ultrasonic testing equipment.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The property marvell,wakeup-pin and marvell,wakeup-gap-ms are read as
u16 in the driver. Fix documentation and example accordingly.
Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>
The values computed during Diffie-Hellman key exchange are often used
in combination with key derivation functions to create cryptographic
keys. Add a placeholder for a later implementation to configure a
key derivation function that will transform the Diffie-Hellman
result returned by the KEYCTL_DH_COMPUTE command.
[This patch was stripped down from a patch produced by Mat Martineau that
had a bug in the compat code - so for the moment Stephan's patch simply
requires that the placeholder argument must be NULL]
Original-signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
The erratum fixes the hang of ITS SYNC command by avoiding inter node
io and collections/cpu mapping on thunderx dual-socket platform.
This fix is only applicable for Cavium's ThunderX dual-socket platform.
Reviewed-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
- use of vma_pages instead of explicit computation.
- DocBook and headerdoc updates for dma-buf.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=XMBK
-----END PGP SIGNATURE-----
Merge tag 'dma-buf-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf
Pull dma-buf updates from Sumit Semwal:
- use of vma_pages instead of explicit computation
- DocBook and headerdoc updates for dma-buf
* tag 'dma-buf-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf:
dma-buf: use vma_pages()
fence: add missing descriptions for fence
doc: update/fixup dma-buf related DocBook
reservation: add headerdoc comments
dma-buf: headerdoc fixes
Pull networking fixes from David Miller:
1) Fix negative error code usage in ATM layer, from Stefan Hajnoczi.
2) If CONFIG_SYSCTL is disabled, the default TTL is not initialized
properly. From Ezequiel Garcia.
3) Missing spinlock init in mvneta driver, from Gregory CLEMENT.
4) Missing unlocks in hwmb error paths, also from Gregory CLEMENT.
5) Fix deadlock on team->lock when propagating features, from Ivan
Vecera.
6) Work around buffer offset hw bug in alx chips, from Feng Tang.
7) Fix double listing of SCTP entries in sctp_diag dumps, from Xin
Long.
8) Various statistics bug fixes in mlx4 from Eric Dumazet.
9) Fix some randconfig build errors wrt fou ipv6 from Arnd Bergmann.
10) All of l2tp was namespace aware, but the ipv6 support code was not
doing so. From Shmulik Ladkani.
11) Handle on-stack hrtimers properly in pktgen, from Guenter Roeck.
12) Propagate MAC changes properly through VLAN devices, from Mike
Manning.
13) Fix memory leak in bnx2x_init_one(), from Vitaly Kuznetsov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
sfc: Track RPS flow IDs per channel instead of per function
usbnet: smsc95xx: fix link detection for disabled autonegotiation
virtio_net: fix virtnet_open and virtnet_probe competing for try_fill_recv
bnx2x: avoid leaking memory on bnx2x_init_one() failures
fou: fix IPv6 Kconfig options
openvswitch: update checksum in {push,pop}_mpls
sctp: sctp_diag should dump sctp socket type
net: fec: update dirty_tx even if no skb
vlan: Propagate MAC address to VLANs
atm: iphase: off by one in rx_pkt()
atm: firestream: add more reserved strings
vxlan: Accept user specified MTU value when create new vxlan link
net: pktgen: Call destroy_hrtimer_on_stack()
timer: Export destroy_hrtimer_on_stack()
net: l2tp: Make l2tp_ip6 namespace aware
Documentation: ip-sysctl.txt: clarify secure_redirects
sfc: use flow dissector helpers for aRFS
ieee802154: fix logic error in ieee802154_llsec_parse_dev_addr
net: nps_enet: Disable interrupts before napi reschedule
net/lapb: tuse %*ph to dump buffers
...
Split out dma-buf related parts into their own section, add missing
files, and write a bit of overview about how it all fits together.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Document the ddc-i2c-bus property used by imx-ldb driver to read EDID
information via I2C interface.
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Clarify how secure_redirects works. Mention that RFC1122 always applies.
Signed-off-by: Eric Garver <e@erig.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the second update round for 4.7-rc1. Most of changes are
about the pending ASoC updates and fixes, including a few new
drivers. Below are some highlights:
ASoC:
- New drivers for MAX98371 and TAS5720
- SPI support for TLV320AIC32x4, along with the module split
- TDM support for STI Uniperf IPs
- Remaining topology API fixes / updates
HDA:
- A couple of Dell quirks and new Realtek codec support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJXSLGwAAoJEGwxgFQ9KSmkKz4P/2xpAXcwjT/g/WgeNVsZLnxd
vs1KlMPSWXLHY7ESZB+oDYtw5pAQWta2gKnG3T0QpkEtyqcyvEAUch55SfPbkDWz
bRwboK91NF9Cfrso+QnUG1HdpaeDsNydiAR5u2sdemQG+rh8TmWXNmFsuqPptjbm
LP6Spf8Ia2TYAvagZOB+2UTl7Jq8jMXiYP3aGWMHm7P/kREMQkSWcQ9U8F8UK92G
5D0qKGvChsd23ybGUL1nBM7wBvErFoKd4Xa1zMudQt8EkTjistdgm24v3PO+lKDv
JYiEugOZctzqtQVUlQMXcIqrlsafXwJN7ttKGst9gj32bM+a7EW0TGG0KyhxXI5w
fRgGU7AJwncs9hBzEPBfc6Jms85THN2HpusU61ZYpyFAhLnHAOL7iIZnNKY8Pyyg
tOPY2lTwHD9ic9EiC33/IypT50n0lBOi7X+YE7lGWdm2jXNvxtFv1jUw99kx25fj
UaFNQaDYXXDKO1POCFrHpIq+jJ71Jmk7mXktI75wfuLyX3PSPyFg8OBbYVbTWkbL
xdSqBs6LCESZ1iV9mauxwPSex44BpaMB3E0TA+7iN3+0Uwdfxe0OoLnX6dGiLSZJ
QenFu/EDdCsA8rlrDy7AS1e5ulpYsTY1KGSZbfNzMdNsmD2XC3FdZHEF5PAC4wZQ
EnNaik6InJgHlMF/6MXo
=uNKQ
-----END PGP SIGNATURE-----
Merge tag 'sound-4.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound updates from Takashi Iwai:
"This is the second update round for 4.7-rc1. Most of changes are
about the pending ASoC updates and fixes, including a few new drivers.
Below are some highlights:
ASoC:
- New drivers for MAX98371 and TAS5720
- SPI support for TLV320AIC32x4, along with the module split
- TDM support for STI Uniperf IPs
- Remaining topology API fixes / updates
HDA:
- A couple of Dell quirks and new Realtek codec support"
* tag 'sound-4.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (63 commits)
ALSA: hda - Fix headset mic detection problem for one Dell machine
spi: spi-ep93xx: Fix the PTR_ERR() argument
ALSA: hda/realtek - Add support for ALC295/ALC3254
ASoC: kirkwood: fix build failure
ALSA: hda - Fix headphone noise on Dell XPS 13 9360
ASoC: ak4642: Enable cache usage to fix crashes on resume
ASoC: twl6040: Disconnect AUX output pads on digital mute
ASoC: tlv320aic32x4: Properly implement the positive and negative pins into the mixers
rcar: src: skip disabled-SRC nodes
ASoC: max98371 Remove duplicate entry in max98371_reg
ASoC: twl6040: Select LPPLL during standby
ASoC: rsnd: don't use prohibited number to PDMACHCRn.SRS
ASoC: simple-card: Add pm callbacks to platform driver
ASoC: pxa: Fix module autoload for platform drivers
ASoC: topology: Fix memory leak in widget creation
ASoC: Add max98371 codec driver
ASoC: rsnd: count .probe/.remove for rsnd_mod_call()
ASoC: topology: Check size mismatch of ABI objects before parsing
ASoC: topology: Check failure to create a widget
ASoC: add support for TAS5720 digital amplifier
...
Pull SCSI target updates from Nicholas Bellinger:
"Here are the outstanding target pending updates for v4.7-rc1.
The highlights this round include:
- Allow external PR/ALUA metadata path be defined at runtime via top
level configfs attribute (Lee)
- Fix target session shutdown bug for ib_srpt multi-channel (hch)
- Make TFO close_session() and shutdown_session() optional (hch)
- Drop se_sess->sess_kref + convert tcm_qla2xxx to internal kref
(hch)
- Add tcm_qla2xxx endpoint attribute for basic FC jammer (Laurence)
- Refactor iscsi-target RX/TX PDU encode/decode into common code
(Varun)
- Extend iscsit_transport with xmit_pdu, release_cmd, get_rx_pdu,
validate_parameters, and get_r2t_ttt for generic ISO offload
(Varun)
- Initial merge of cxgb iscsi-segment offload target driver (Varun)
The bulk of the changes are Chelsio's new driver, along with a number
of iscsi-target common code improvements made by Varun + Co along the
way"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (29 commits)
iscsi-target: Fix early sk_data_ready LOGIN_FLAGS_READY race
cxgbit: Use type ISCSI_CXGBIT + cxgbit tpg_np attribute
iscsi-target: Convert transport drivers to signal rdma_shutdown
iscsi-target: Make iscsi_tpg_np driver show/store use generic code
tcm_qla2xxx Add SCSI command jammer/discard capability
iscsi-target: graceful disconnect on invalid mapping to iovec
target: need_to_release is always false, remove redundant check and kfree
target: remove sess_kref and ->shutdown_session
iscsi-target: remove usage of ->shutdown_session
tcm_qla2xxx: introduce a private sess_kref
target: make close_session optional
target: make ->shutdown_session optional
target: remove acl_stop
target: consolidate and fix session shutdown
cxgbit: add files for cxgbit.ko
iscsi-target: export symbols
iscsi-target: call complete on conn_logout_comp
iscsi-target: clear tx_thread_active
iscsi-target: add new offload transport type
iscsi-target: use conn_transport->transport_type in text rsp
...
- Dynamic counter infrastructure in the IB drivers
This is a sysfs based code to allow free form access to the hardware
counters RDMA devices might support so drivers don't need to code
this up repeatedly themselves
- SendOnlyFullMember multicast support
- IB router support
- A couple misc fixes
- The big item on the list: hfi1 driver updates, plus moving the hfi1
driver out of staging
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5+cf
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull more rdma updates from Doug Ledford:
"This is the second group of code for the 4.7 merge window. It looks
large, but only in one sense. I'll get to that in a minute. The list
of changes here breaks down as follows:
- Dynamic counter infrastructure in the IB drivers
This is a sysfs based code to allow free form access to the
hardware counters RDMA devices might support so drivers don't need
to code this up repeatedly themselves
- SendOnlyFullMember multicast support
- IB router support
- A couple misc fixes
- The big item on the list: hfi1 driver updates, plus moving the hfi1
driver out of staging
There was a group of 15 patches in the hfi1 list that I thought I had
in the first pull request but they weren't. So that added to the
length of the hfi1 section here.
As far as these go, everything but the hfi1 is pretty straight
forward.
The hfi1 is, if you recall, the driver that Al had complaints about
how it used the write/writev interfaces in an overloaded fashion. The
write portion of their interface behaved like the write handler in the
IB stack proper and did bi-directional communications. The writev
interface, on the other hand, only accepts SDMA request structures.
The completions for those structures are sent back via an entirely
different event mechanism.
With the security patch, we put security checks on the write
interface, however, we also knew they would be going away soon. Now,
we've converted the write handler in the hfi1 driver to use ioctls
from the IB reserved magic area for its bidirectional communications.
With that change, Intel has addressed all of the items originally on
their TODO when they went into staging (as well as many items added to
the list later).
As such, I moved them out, and since they were the last item in the
staging/rdma directory, and I don't have immediate plans to use the
staging area again, I removed the staging/rdma area.
Because of the move out of staging, as well as a series of 5 patches
in the hfi1 driver that removed code people thought should be done in
a different way and was optional to begin with (a snoop debug
interface, an eeprom driver for an eeprom connected directory to their
hfi1 chip and not via an i2c bus, and a few other things like that),
the line count, especially the removal count, is high"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (56 commits)
staging/rdma: Remove the entire rdma subdirectory of staging
IB/core: Make device counter infrastructure dynamic
IB/hfi1: Fix pio map initialization
IB/hfi1: Correct 8051 link parameter settings
IB/hfi1: Update pkey table properly after link down or FM start
IB/rdamvt: Fix rdmavt s_ack_queue sizing
IB/rdmavt: Max atomic value should be a u8
IB/hfi1: Fix hard lockup due to not using save/restore spin lock
IB/hfi1: Add tracing support for send with invalidate opcode
IB/hfi1, qib: Add ieth to the packet header definitions
IB/hfi1: Move driver out of staging
IB/hfi1: Do not free hfi1 cdev parent structure early
IB/hfi1: Add trace message in user IOCTL handling
IB/hfi1: Remove write(), use ioctl() for user cmds
IB/hfi1: Add ioctl() interface for user commands
IB/hfi1: Remove unused user command
IB/hfi1: Remove snoop/diag interface
IB/hfi1: Remove EPROM functionality from data device
IB/hfi1: Remove UI char device
IB/hfi1: Remove multiple device cdev
...
Here is the quote from [1]:
The unit-address must match the first address specified
in the reg property of the node. If the node has no reg property,
the @ and unit-address must be omitted and the node-name alone
differentiates the node from other nodes at the same level
This patch adjusts MIPS dts-files and devicetree binding
documentation in accordance with [1].
[1] Power.org(tm) Standard for Embedded Power Architecture(tm)
Platform Requirements (ePAPR). Version 1.1 – 08 April 2011.
Chapter 2.2.1.1 Node Name Requirements
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13345/
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
improvements of UBI and UBIFS.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=L16y
-----END PGP SIGNATURE-----
Merge tag 'upstream-4.7-rc1' of git://git.infradead.org/linux-ubifs
Pull UBI/UBIFS updates from Richard Weinberger:
"This contains mostly cleanups and minor improvements of UBI and UBIFS"
* tag 'upstream-4.7-rc1' of git://git.infradead.org/linux-ubifs:
ubifs: ubifs_dump_inode: Fix dumping field bulk_read
UBI: Fix static volume checks when Fastmap is used
UBI: Set free_count to zero before walking through erase list
UBI: Silence an unintialized variable warning
UBI: Clean up return in ubi_remove_volume()
UBI: Modify wrong comment in ubi_leb_map function.
UBI: Don't read back all data in ubi_eba_copy_leb()
UBI: Add ro-mode sysfs attribute
Pull vfs fixes from Al Viro:
"Followups to the parallel lookup work:
- update docs
- restore killability of the places that used to take ->i_mutex
killably now that we have down_write_killable() merged
- Additionally, it turns out that I missed a prerequisite for
security_d_instantiate() stuff - ->getxattr() wasn't the only thing
that could be called before dentry is attached to inode; with smack
we needed the same treatment applied to ->setxattr() as well"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
switch ->setxattr() to passing dentry and inode separately
switch xattr_handler->set() to passing dentry and inode separately
restore killability of old mutex_lock_killable(&inode->i_mutex) users
add down_write_killable_nested()
update D/f/directory-locking
smack ->d_instantiate() uses ->setxattr(), so to be able to call it before
we'd hashed the new dentry and attached it to inode, we need ->setxattr()
instances getting the inode as an explicit argument rather than obtaining
it from dentry.
Similar change for ->getxattr() had been done in commit ce23e64. Unlike
->getxattr() (which is used by both selinux and smack instances of
->d_instantiate()) ->setxattr() is used only by smack one and unfortunately
it got missed back then.
Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull overlayfs update from Miklos Szeredi:
"The meat of this is a change to use the mounter's credentials for
operations that require elevated privileges (such as whiteout
creation). This fixes behavior under user namespaces as well as being
a nice cleanup"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: Do d_type check only if work dir creation was successful
ovl: update documentation
ovl: override creds with the ones from the superblock mounter
We've already noticed a few flaws in the MTD work for v4.7-rc1:
* The Atmel folks got ahead of themselves on trying to support their latest
hardware and were working off incorrect documentation. Fix up the NAND
driver to get this correct.
* Fix up device tree example documentation to use the latest recommendations
for describing NAND ECC algorithms.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=kb+w
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20160527' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Brian Norris:
"We've already noticed a few flaws in the MTD work for v4.7-rc1:
- The Atmel folks got ahead of themselves on trying to support their
latest hardware and were working off incorrect documentation. Fix
up the NAND driver to get this correct.
- Fix up device tree example documentation to use the latest
recommendations for describing NAND ECC algorithms"
* tag 'for-linus-20160527' of git://git.infradead.org/linux-mtd:
Documentation: dt: mtd: drop "soft_bch" from example
Revert "mtd: atmel_nand: Support variable RB_EDGE interrupts"
Pull drm fixes from Dave Airlie:
- one IMX built-in regression fix
- a set of amdgpu fixes, mostly powerplay and polaris GPU stuff
- a set of i915 fixes all over, many cc'ed to stable.
The i915 batch contain support for DP++ dongle detection, which is
used to fix some regressions in the HDMI color depth area
* tag 'drm-fixes-v4.7-rc1' of git://people.freedesktop.org/~airlied/linux: (44 commits)
drm/amd: add Kconfig dependency for ACP on DRM_AMDGPU
drm/amdgpu: Fix hdmi deep color support.
drm/amdgpu: fix bug in fence driver fini
drm/i915: Stop automatically retiring requests after a GPU hang
drm/i915: Unify intel_ring_begin()
drm/i915: Ignore stale wm register values on resume on ilk-bdw (v2)
drm/i915/psr: Try to program link training times correctly
drm/imx: Match imx-ipuv3-crtc components using device node in platform data
drm/i915/bxt: Adjusting the error in horizontal timings retrieval
drm/i915: Don't leave old junk in ilk active watermarks on readout
drm/i915: s/DPPL/DPLL/ for SKL DPLLs
drm/i915: Fix gen8 semaphores id for legacy mode
drm/i915: Set crtc_state->lane_count for HDMI
drm/i915/BXT: Retrieving the horizontal timing for DSI
drm/i915: Protect gen7 irq_seqno_barrier with uncore lock
drm/i915: Re-enable GGTT earlier during resume on pre-gen6 platforms
drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT
drm/i915: Enable/disable TMDS output buffers in DP++ adaptor as needed
drm/i915: Respect DP++ adaptor TMDS clock limit
drm: Add helper for DP++ adaptors
...
Really sorry about this late pull request. It looks like at the time I
sent my pull request for v4.7 there was some conflict or other issue
which caused my script to stop merging the ASoC branches at some point
after the HDMI changes.
It's all specific driver updates, including:
- New drivers for MAX98371 and TAS5720.
- SPI support for TLV320AIC32x4.
- TDM support for STI Uniperf IPs.
This code should all have been in -next prior to the merge window apart
from some fixes, it dropped out on the 18th.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXSEQkAAoJECTWi3JdVIfQsPoH/jDJ/Eo95aq2UWBqjNbGCahZ
GIiV6TsSnfbg+UIiEvnJUt0ABa0NYKbyOGUny+NC/gLUt4n3FvzGSGGXs/pkuR9R
kF07daPDyQp2uz2GFjN45JLZJV/P1ofkJTsjYnqqqup15XW7EA0F5KbTiOhd+VIc
GlgUHZGMpxVYCc9bS59ZW2V/X1Epzuh8cKD3+I1vyYo6UZbsKMPzhS3aksCM5cMO
h3uifB4hgS26x+0Yrinj0capUalmS+N7isMtL3r/c0Z8DGRiHZOZuMnfoGavNek+
qR/SbOpj2Lj6J9Xut63xtoLAo/JNj7Fk7xYxkOxlpO8+Jqk9KgEKEM/Va3xLJ+M=
=yEWH
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v4.7 part 2
Really sorry about this late pull request. It looks like at the time I
sent my pull request for v4.7 there was some conflict or other issue
which caused my script to stop merging the ASoC branches at some point
after the HDMI changes.
It's all specific driver updates, including:
- New drivers for MAX98371 and TAS5720.
- SPI support for TLV320AIC32x4.
- TDM support for STI Uniperf IPs.
This code should all have been in -next prior to the merge window apart
from some fixes, it dropped out on the 18th.
I see the main drm pull got merged, here's the first batch of fixes for
4.7 already. Fixes all around, a large portion cc: stable stuff.
[airlied: the DP++ stuff is a regression fix].
* tag 'drm-intel-next-fixes-2016-05-25' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Stop automatically retiring requests after a GPU hang
drm/i915: Unify intel_ring_begin()
drm/i915: Ignore stale wm register values on resume on ilk-bdw (v2)
drm/i915/psr: Try to program link training times correctly
drm/i915/bxt: Adjusting the error in horizontal timings retrieval
drm/i915: Don't leave old junk in ilk active watermarks on readout
drm/i915: s/DPPL/DPLL/ for SKL DPLLs
drm/i915: Fix gen8 semaphores id for legacy mode
drm/i915: Set crtc_state->lane_count for HDMI
drm/i915/BXT: Retrieving the horizontal timing for DSI
drm/i915: Protect gen7 irq_seqno_barrier with uncore lock
drm/i915: Re-enable GGTT earlier during resume on pre-gen6 platforms
drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT
drm/i915: Enable/disable TMDS output buffers in DP++ adaptor as needed
drm/i915: Respect DP++ adaptor TMDS clock limit
drm: Add helper for DP++ adaptors
Pull kconfig update from Michal Marek:
- fix for behavior of tristate choice items and fix for documentation
of existing kconfig behavior [Dirk Gouders]
- more helpful "unexpected data" kconfig warning [Paul Bolle]
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig/symbol.c: handle choice_values that depend on 'm' symbols
kconfig-language: elaborate on the type of a choice
kconfig-language: fix comment on dependency-generated menu structures.
kconfig: add unexpected data itself to warning
- Until now, dax has been disabled if media errors were found on
any device. This enables the use of DAX in the presence of these
errors by making all sector-aligned zeroing go through the driver.
- The driver (already) has the ability to clear errors on writes that
are sent through the block layer using 'DSMs' defined in ACPI 6.1.
Other misc changes:
- When mounting DAX filesystems, check to make sure the partition
is page aligned. This is a requirement for DAX, and previously, we
allowed such unaligned mounts to succeed, but subsequent reads/writes
would fail.
- Misc/cleanup fixes from Jan that remove unused code from DAX related to
zeroing, writeback, and some size checks.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=v6Of
-----END PGP SIGNATURE-----
Merge tag 'dax-misc-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull misc DAX updates from Vishal Verma:
"DAX error handling for 4.7
- Until now, dax has been disabled if media errors were found on any
device. This enables the use of DAX in the presence of these
errors by making all sector-aligned zeroing go through the driver.
- The driver (already) has the ability to clear errors on writes that
are sent through the block layer using 'DSMs' defined in ACPI 6.1.
Other misc changes:
- When mounting DAX filesystems, check to make sure the partition is
page aligned. This is a requirement for DAX, and previously, we
allowed such unaligned mounts to succeed, but subsequent
reads/writes would fail.
- Misc/cleanup fixes from Jan that remove unused code from DAX
related to zeroing, writeback, and some size checks"
* tag 'dax-misc-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: fix a comment in dax_zero_page_range and dax_truncate_page
dax: for truncate/hole-punch, do zeroing through the driver if possible
dax: export a low-level __dax_zero_page_range helper
dax: use sb_issue_zerout instead of calling dax_clear_sectors
dax: enable dax in the presence of known media errors (badblocks)
dax: fallback from pmd to pte on error
block: Update blkdev_dax_capable() for consistency
xfs: Add alignment check for DAX mount
ext2: Add alignment check for DAX mount
ext4: Add alignment check for DAX mount
block: Add bdev_dax_supported() for dax mount checks
block: Add vfs_msg() interface
dax: Remove redundant inode size checks
dax: Remove pointless writeback from dax_do_io()
dax: Remove zeroing from dax_io()
dax: Remove dead zeroing code from fault handlers
ext2: Avoid DAX zeroing to corrupt data
ext2: Fix block zeroing in ext2_get_blocks() for DAX
dax: Remove complete_unwritten argument
DAX: move RADIX_DAX_ definitions to dax.c
In practice, each RDMA device has a unique set of counters that the
hardware implements. Having a central set of counters that they must
all adhere to is limiting and causes many useful counters to not be
available.
Therefore we create a dynamic counter registration infrastructure.
The driver must implement a stats structure allocation routine, in
which the driver must place the directory name it wants, a list of
names for all of the counters, an array of u64 counters themselves,
plus a few generic configuration options.
We then implement a core routine to create a sysfs file for each
of the named stats elements, and a core routine to retrieve the
stats when any of the sysfs attribute files are read.
To avoid excessive beating on the stats generation routine in the
drivers, the core code also caches the stats for a short period of
time so that someone attempting to read all of the stats in a
given device's directory will not result in a stats generation
call per file read.
Future work will attempt to standardize just the shared stats
elements, and possibly add a method to get the stats via netlink
in addition to sysfs.
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
[ Add caching, make structure names more informative, add i40iw support,
other significant rewrites from the original patch ]
Pull hwmon fixlets from Jean Delvare.
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
Documentation/hwmon: Update links in max34440
hwmon: (emc2103) Fix typo in MODULE_PARM_DESC
Pull thermal management updates from Zhang Rui:
- Introduce generic ADC thermal driver, based on OF thermal (Laxman
Dewangan)
- Introduce new thermal driver for Tango chips (Marc Gonzalez)
- Rockchip driver support for RK3399, RK3366, and some fixes (Caesar
Wang, Elaine Zhang and Shawn Lin)
- Add CPU power cooling model to Mediatek thermal driver (Dawei Chien)
- Wider usage of dev_thermal_zone_of_sensor_register (Eduardo Valentin)
- TI thermal driver gained a new maintainer (Keerthy).
- Enabled powerclamp driver by checking CPU feature and package cstate
counter instead of CPU whitelist (Jacob Pan)
- Various fixes on thermal governor, OF thermal, Tegra, and RCAR
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (50 commits)
thermal: tango: initialize TEMPSI_CFG
thermal: rockchip: use the usleep_range instead of udelay
thermal: rockchip: add the notes for better reading
thermal: rockchip: Support RK3366 SoCs in the thermal driver
thermal: rockchip: handle the power sequence for tsadc controller
thermal: rockchip: update the tsadc table for rk3399
thermal: rockchip: fixes the code_to_temp for tsadc driver
thermal: rockchip: disable thermal->clk in err case
thermal: tegra: add Tegra132 specific SOC_THERM driver
thermal: fix ptr_ret.cocci warnings
thermal: mediatek: Add cpu dynamic power cooling model.
thermal: generic-adc: Add ADC based thermal sensor driver
thermal: generic-adc: Add DT binding for ADC based thermal sensor
thermal: tegra: fix static checker warning
thermal: tegra: mark PM functions __maybe_unused
thermal: add temperature sensor support for tango SoC
thermal: hisilicon: fix IRQ imbalance enabling
thermal: hisilicon: support to use any sensor
thermal: rcar: Remove binding docs for r8a7794
thermal: tegra: add PM support
...
Linus Torvalds