These changes from 30 individual branches for the most part update device
tree files, but there are also a few source code changes that have crept
in this time, usually in order to atomically move over a driver from
using hardcoded data to DT probing.
A number of platforms change their DT files to use the C preprocessor,
which is causing a bit of churn, but that is hopefully only this once.
There are a few conflicts with the other branches unfortunately:
* in exynos5440.dtsi and kirkwood-6281.dtsi, device nodes are added
from multiple branches. Need to be careful to have the right
set of closing braces as git gets this one wrong.
* In kirkwood.dtsi, one 'ranges' line got split into two lines, while
another line got added. Order of the lines does not matter.
* in sama5d3.dtsi, some cleanup was merged the wrong way, causing
a bogus conflict. We want the 'dmas' and 'dma-names' properties
to get added here.
* Two lines got removed independently in arch/arm/mach-mxs/mach-mxs.c
* Contents get added independently in arch/arm/mach-omap2/cclock33xx_data.c
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=8PtJ
-----END PGP SIGNATURE-----
Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree changes from Arnd Bergmann:
"These changes from 30 individual branches for the most part update
device tree files, but there are also a few source code changes that
have crept in this time, usually in order to atomically move over a
driver from using hardcoded data to DT probing.
A number of platforms change their DT files to use the C preprocessor,
which is causing a bit of churn, but that is hopefully only this once"
* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits)
ARM: at91: dt: rm9200ek: add spi support
ARM: at91: dt: rm9200: add spi support
ARM: at91/DT: at91sam9n12: add SPI DMA client infos
ARM: at91/DT: sama5d3: add SPI DMA client infos
ARM: at91/DT: fix SPI compatibility string
ARM: Kirkwood: Fix the internal register ranges translation
ARM: dts: bcm281xx: change comment to C89 style
ARM: mmc: bcm281xx SDHCI driver (dt mods)
ARM: nomadik: add the new clocks to the device tree
clk: nomadik: implement the Nomadik clocks properly
ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
ARM: dts: omap4-panda: Fix DVI EDID reads
ARM: dts: omap4-panda: Add USB Host support
arm: mvebu: enable mini-PCIe connectors on Armada 370 RD
ARM: shmobile: irqpin: add a DT property to enable masking on parent
ARM: dts: AM43x EPOS EVM support
ARM: dts: OMAP5: Add bandgap DT entry
ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
...
Since the info_mask split, iio_channel_has_info() is not working correctly.
info_mask_separate and info_mask_shared_by_type, it is not possible to compare
them directly with the iio_chan_info_enum enum. Correct that bit using the BIT()
macro.
Cc: <stable@vger.kernel.org> # 3.10.x
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
These changes are all to SoC-specific code, a total of 33 branches on
17 platforms were pulled into this. Like last time, Renesas sh-mobile
is now the platform with the most changes, followed by OMAP and EXYNOS.
Two new platforms, TI Keystone and Rockchips RK3xxx are added in
this branch, both containing almost no platform specific code at all,
since they are using generic subsystem interfaces for clocks, pinctrl,
interrupts etc. The device drivers are getting merged through the
respective subsystem maintainer trees.
One more SoC (u300) is now multiplatform capable and several others
(shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
towards that goal with this series but need more work.
Also noteworthy is the work on PCI here, which is traditionally part of
the SoC specific code. With the changes done by Thomas Petazzoni, we can
now more easily have PCI host controller drivers as loadable modules and
keep them separate from the platform code in drivers/pci/host. This has
already led to the discovery that three platforms (exynos, spear and imx)
are actually using an identical PCIe host controller and will be able
to share a driver once support for spear and imx is added.
Conflicts:
* asm/glue-proc.h has one CPU type getting added that conflicts
with another addition in 3.10-rc7
* Simple context changes in arch/arm/Makefile and arch/arm/Kconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIVAwUAUdLnpmCrR//JCVInAQLoFRAAyatR+MhVFwc91cO7yDw/mz81RO1V9jEd
QMufoWi0BRfBsubqxnGlb510EEMTz7gxdrlYPILYNr8TqR+lNGhjKt2FQAjN3q2O
IBvu4x8C+xcxnMNbkCnTQRxP/ziK6yCI6e7enQhwuMuJwvsnJtGbsqKi5ODMw6x0
o5EQmIdj5NhhSJqJZPCmWsKbx100TH1UwaEnhNl0DSaFj51n3bVRrK6Nxce10GWZ
HsS1/a63lq/YZLkwfUEvgin/PU9Jx5jMmqhlp3bZjG+f1ItdzJF+9IgS248vCIi2
ystzWCH88Kh69UFcYFfCjeZe8H45XcP+Zykd8WC0DvF/a7Hwk5KTKE/ciT6RPRxb
rkWW5EwjqZL9w9cU3rUHWtSVenayQMMEmCfksadr1AExyCrhPqfs9RINyBs2lK5a
q2bdSFbXZsNzSyL+3yQAfChvRo1/2FdlFVQy+oVUCActV7L77Y7y6jl+b2qzFsSu
xMKwvC/1vDXTvOnGk6A/qJu7yrHpqJrvw1eI+wnMswNBl7lCTgyyHnr5y8S092jI
KU4hmSxsYP+y13HmKy4ewPy9DYJYBTSdReKfEFo79Dx8eqySAWjHFL/OPRqhCUYS
kBq0eZpVZO7tJnHRaRz8n93wIYzb1UOhhgVwxdjPZF9L4d/jzh1BCv0OBWv8IXCu
uWLAi92lL24=
=0r9S
-----END PGP SIGNATURE-----
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC specific changes from Arnd Bergmann:
"These changes are all to SoC-specific code, a total of 33 branches on
17 platforms were pulled into this. Like last time, Renesas sh-mobile
is now the platform with the most changes, followed by OMAP and
EXYNOS.
Two new platforms, TI Keystone and Rockchips RK3xxx are added in this
branch, both containing almost no platform specific code at all, since
they are using generic subsystem interfaces for clocks, pinctrl,
interrupts etc. The device drivers are getting merged through the
respective subsystem maintainer trees.
One more SoC (u300) is now multiplatform capable and several others
(shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
towards that goal with this series but need more work.
Also noteworthy is the work on PCI here, which is traditionally part
of the SoC specific code. With the changes done by Thomas Petazzoni,
we can now more easily have PCI host controller drivers as loadable
modules and keep them separate from the platform code in
drivers/pci/host. This has already led to the discovery that three
platforms (exynos, spear and imx) are actually using an identical PCIe
host controller and will be able to share a driver once support for
spear and imx is added."
* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits)
ARM: integrator: let pciv3 use mem/premem from device tree
ARM: integrator: set local side PCI addresses right
ARM: dts: Add pcie controller node for exynos5440-ssdk5440
ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC
ARM: EXYNOS: Enable PCIe support for Exynos5440
pci: Add PCIe driver for Samsung Exynos
ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
ARM: keystone: Move CPU bringup code to dedicated asm file
ARM: multiplatform: always pick one CPU type
ARM: imx: select syscon for IMX6SL
ARM: keystone: select ARM_ERRATA_798181 only for SMP
ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1
ARM: OMAP2+: AM43x: resolve SMP related build error
dmaengine: edma: enable build for AM33XX
ARM: edma: Add EDMA crossbar event mux support
ARM: edma: Add DT and runtime PM support to the private EDMA API
dmaengine: edma: Add TI EDMA device tree binding
arm: add basic support for Rockchip RK3066a boards
arm: add debug uarts for rockchip rk29xx and rk3xxx series
arm: Add basic clocks for Rockchip rk3066a SoCs
...
This contains cleanups as preparation for other branches adding new
features, we pulled 16 branches for 9 platforms into this one.
Most notable here is the removal of support for ATAGS based OMAP4
systems. Since all OMAP4 machines are fully functional with DT based
booting in 3.10, we can remove a lot of code here.
Also noteworthy is Maxime Ripard's cleanup of the machine descriptors,
which means we need no machine descriptors in a lot more cases and
can boot additional machines by just having the respective device
drivers enabled.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=XDJs
-----END PGP SIGNATURE-----
Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Arnd Bergmann:
"This contains cleanups as preparation for other branches adding new
features, we pulled 16 branches for 9 platforms into this one.
Most notable here is the removal of support for ATAGS based OMAP4
systems. Since all OMAP4 machines are fully functional with DT based
booting in 3.10, we can remove a lot of code here.
Also noteworthy is Maxime Ripard's cleanup of the machine descriptors,
which means we need no machine descriptors in a lot more cases and can
boot additional machines by just having the respective device drivers
enabled."
* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits)
ARM: picoxcell: remove .nr_irqs reference
ARM: s5p64x0: avoid build warning for uncompress.h
ARM: SAMSUNG: Remove unused plat/regs-watchdog.h header
ARM: SAMSUNG: Remove legacy watchdog reset code
ARM: SAMSUNG: Let platforms use the new watchdog reset driver
ARM: SAMSUNG: Add watchdog reset driver
ARM: SAMSUNG: Use local definitions of watchdog registers
watchdog: s3c2410_wdt: Use local register definitions
ARM: S5P64X0: Use common uncompress.h part for plat-samsung
ARM: SAMSUNG: Consolidate uncompress subroutine
ARM: at91: drop rm9200dk board support
ARM: dts: msm: Fix merge resolution
ARM: OMAP1: Remove dma.h
ARM: OMAP1: Remove legacy irda.h and irda setup from board files
ARM: OMAP1: Remove duplicated DMA channel definitions
ARM: OMAP1: Remove McBSP DMA channel definitions
ARM: OMAP2+: Remove dma.h
ARM: OMAP2+: hwmod: Remove remaining DMA channel definitions
ARM: OMAP2+: Remove duplicated DMA channel definitions
ARM: OMAP2+: Remove AES crypto device DMA channel definitions
...
These are various bug fixes that were not considered important enough
for merging into 3.10. The majority of the ARM fixes are for the OMAP
and at91 platforms, and there is another set of bug fixes for device
drivers that resolve 'randconfig' build errors and that the subsystem
maintainers either did not pick up or preferred to get merged through
the arm-soc tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=gNDf
-----END PGP SIGNATURE-----
Merge tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC non-cricitical bug fixes from Arnd Bergmann:
"These are various bug fixes that were not considered important enough
for merging into 3.10.
The majority of the ARM fixes are for the OMAP and at91 platforms, and
there is another set of bug fixes for device drivers that resolve
'randconfig' build errors and that the subsystem maintainers either
did not pick up or preferred to get merged through the arm-soc tree."
* tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
ARM: at91/PMC: use at91_usb_rate() for UTMI PLL
ARM: at91/PMC: fix at91sam9n12 USB FS init
ARM: at91/PMC: at91sam9n12 family has a PLLB
ARM: at91/PMC: sama5d3 family doesn't have a PLLB
ARM: tegra: fix section mismatch in tegra_pmc_parse_dt
ARM: mxs: don't select HAVE_PWM
ARM: mxs: stub out mxs_pm_init for !CONFIG_PM
cpuidle: calxeda: select ARM_CPU_SUSPEND
ARM: mvebu: fix length of ethernet registers in mv78260 dtsi
ARM: at91: cpuidle: Fix target_residency
ARM: at91: fix at91_extern_irq usage for non-dt boards
ARM: sirf: use CONFIG_SIRF rather than CONFIG_PRIMA2 where necessary
clocksource: kona: adapt to CLOCKSOURCE_OF_DECLARE change
X.509: do not emit any informational output
mtd: omap2: allow bulding as a module
[SCSI] nsp32: use mdelay instead of large udelay constants
hwrng: bcm2835: fix MODULE_LICENSE tag
ARM: at91: Change the internal SRAM memory type MT_MEMORY_NONCACHED
ARM: at91: Fix link breakage when !CONFIG_PHYLIB
MAINTAINERS: Add exynos filename match to ARM/S5P EXYNOS ARM ARCHITECTURES
...
Here's the big driver core merge for 3.11-rc1
Lots of little things, and larger firmware subsystem updates, all
described in the shortlog. Nice thing here is that we finally get rid
of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had
been always on for a number of kernel releases, now it's just removed.)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlHRsGMACgkQMUfUDdst+ylIIACfW8lLxOPVK+iYG699TWEBAkp0
LFEAnjlpAMJ1JnoZCuWDZObNCev93zGB
=020+
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here's the big driver core merge for 3.11-rc1
Lots of little things, and larger firmware subsystem updates, all
described in the shortlog. Nice thing here is that we finally get rid
of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had
been always on for a number of kernel releases, now it's just
removed)"
* tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits)
driver core: device.h: fix doc compilation warnings
firmware loader: fix another compile warning with PM_SLEEP unset
build some drivers only when compile-testing
firmware loader: fix compile warning with PM_SLEEP set
kobject: sanitize argument for format string
sysfs_notify is only possible on file attributes
firmware loader: simplify holding module for request_firmware
firmware loader: don't export cache_firmware and uncache_firmware
drivers/base: Use attribute groups to create sysfs memory files
firmware loader: fix compile warning
firmware loader: fix build failure with !CONFIG_FW_LOADER_USER_HELPER
Documentation: Updated broken link in HOWTO
Finally eradicate CONFIG_HOTPLUG
driver core: firmware loader: kill FW_ACTION_NOHOTPLUG requests before suspend
driver core: firmware loader: don't cache FW_ACTION_NOHOTPLUG firmware
Documentation: Tidy up some drivers/base/core.c kerneldoc content.
platform_device: use a macro instead of platform_driver_register
firmware: move EXPORT_SYMBOL annotations
firmware: Avoid deadlock of usermodehelper lock at shutdown
dell_rbu: Select CONFIG_FW_LOADER_USER_HELPER explicitly
...
Here's the big char/misc driver tree merge for 3.11-rc1
A variety of different driver patches here. All of these have been in
linux-next for a while, and the networking patches were acked-by David
Miller, as it made sense for those patches to come through this tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlHRqsQACgkQMUfUDdst+ykNlACgwnDHLav/u2NrAxoqxmw7Bcd8
qY0An3h0ZGI5PpDe6U0IyBDQIipHuOjG
=vaRG
-----END PGP SIGNATURE-----
Merge tag 'char-misc-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here's the big char/misc driver tree merge for 3.11-rc1
A variety of different driver patches here. All of these have been in
linux-next for a while, and the networking patches were acked-by David
Miller, as it made sense for those patches to come through this tree"
* tag 'char-misc-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (102 commits)
Revert "char: misc: assign file->private_data in all cases"
drivers: uio_pdrv_genirq: Use of_match_ptr() macro
mei: check whether hw start has succeeded
mei: check if the hardware reset succeeded
mei: mei_cl_connect: don't multiply the timeout twice
mei: do not override a client writing state when buffering
mei: move mei_cl_irq_write_complete to client.c
UIO: Fix concurrency issue
drivers: uio_dmem_genirq: Use of_match_ptr() macro
char: misc: assign file->private_data in all cases
drivers: hv: allocate synic structures before hv_synic_init()
drivers: hv: check interrupt mask before read_index
vme: vme_tsi148.c: fix error return code in tsi148_probe()
FMC: fix error handling in probe() function
fmc: avoid readl/writel namespace conflict
FMC: NULL dereference on allocation failure
UIO: fix uio_pdrv_genirq with device tree but no interrupt
UIO: allow binding uio_pdrv_genirq.c to devices using command line option
FMC: add a char-device mezzanine driver
FMC: add a driver to write mezzanine EEPROM
...
Here's the large staging tree merge for 3.11-rc1
Huge thing here is the Lustre client code. Unfortunatly, due to it not
building properly on a wide variety of different architectures (this was
production code???), it is currently disabled from the build so as to
not annoy people.
Other than Lustre, there are loads of comedi patches, working to clean
up that subsystem, iio updates and new drivers, and a load of cleanups
from the OPW applicants in their quest to get a summer internship.
All of these have been in the linux-next releases for a while (hence the
Lustre code being disabled.)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlHRsacACgkQMUfUDdst+yklBQCgzOUv0SlVYNhRj9KDDu1vxWTG
FnYAnRhRG9oXXkocjH6/cu+YOf21ClpZ
=WDt3
-----END PGP SIGNATURE-----
Merge tag 'staging-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree update from Greg KH:
"Here's the large staging tree merge for 3.11-rc1
Huge thing here is the Lustre client code. Unfortunatly, due to it
not building properly on a wide variety of different architectures
(this was production code???), it is currently disabled from the build
so as to not annoy people.
Other than Lustre, there are loads of comedi patches, working to clean
up that subsystem, iio updates and new drivers, and a load of cleanups
from the OPW applicants in their quest to get a summer internship.
All of these have been in the linux-next releases for a while (hence
the Lustre code being disabled)"
Fixed up trivial conflict in drivers/staging/serqt_usb2/serqt_usb2.c due
to independent renamings in the staging driver cleanup and the USB
tree..
* tag 'staging-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (868 commits)
Revert "Revert "Revert "staging/lustre: drop CONFIG_BROKEN dependency"""
staging: rtl8192u: fix line length in r819xU_phy.h
staging: rtl8192u: rename variables in r819xU_phy.h
staging: rtl8192u: fix comments in r819xU_phy.h
staging: rtl8192u: fix whitespace in r819xU_phy.h
staging: rtl8192u: fix newlines in r819xU_phy.c
staging: comedi: unioxx5: use comedi_alloc_spriv()
staging: comedi: unioxx5: fix unioxx5_detach()
silicom: checkpatch: errors caused by macros
Staging: silicom: remove the board_t typedef in bpctl_mod.c
Staging: silicom: capitalize labels in the bp_media_type enum
Staging: silicom: remove bp_media_type enum typedef
staging: rtl8192u: replace msleep(1) with usleep_range() in r819xU_phy.c
staging: rtl8192u: rename dwRegRead and rtStatus in r819xU_phy.c
staging: rtl8192u: replace __FUNCTION__ in r819xU_phy.c
staging: rtl8192u: limit line size in r819xU_phy.c
zram: allow request end to coincide with disksize
staging: drm/imx: use generic irq chip unused field to block out invalid irqs
staging: drm/imx: use generic irqchip
staging: drm/imx: ipu-dmfc: use defines for ipu channel numbers
...
Here is the big TTY / Serial driver merge for 3.11-rc1.
It's not all that big, nothing major changed in the tty api, which is a
nice change, just a number of serial driver fixes and updates and new
drivers, along with some n_tty fixes to help resolve some reported
issues.
All of these have been in the linux-next releases for a while, with the
exception of the last revert patch, which was reported this past weekend
by two different people as being needed.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlHRtNIACgkQMUfUDdst+ymYgwCeKdyv9wRJ5cIWZt7Jz8ou3P/C
76YAoIvMv+fwoFBpyud/sC8eAKGTQ6KB
=Sjk6
-----END PGP SIGNATURE-----
Merge tag 'tty-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big TTY / Serial driver merge for 3.11-rc1.
It's not all that big, nothing major changed in the tty api, which is
a nice change, just a number of serial driver fixes and updates and
new drivers, along with some n_tty fixes to help resolve some reported
issues.
All of these have been in the linux-next releases for a while, with
the exception of the last revert patch, which was reported this past
weekend by two different people as being needed."
* tag 'tty-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (51 commits)
Revert "serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller"
pch_uart: Add uart_clk selection for the MinnowBoard
tty: atmel_serial: prepare clk before calling enable
tty: Reset itty for other pty
n_tty: Buffer work should not reschedule itself
n_tty: Fix unsafe update of available buffer space
n_tty: Untangle read completion variables
n_tty: Encapsulate minimum_to_wake within N_TTY
serial: omap: Fix device tree based PM runtime
serial: imx: Fix serial clock unbalance
serial/mpc52xx_uart: fix kernel panic when system reboot
serial: mfd: Add sysrq support
serial: imx: enable the clocks for console
tty: serial: add Freescale lpuart driver support
serial: imx: Improve Kconfig text
serial: imx: Allow module build
serial: imx: Fix warning when !CONFIG_SERIAL_IMX_CONSOLE
tty/serial/sirf: fix error propagation in sirfsoc_uart_probe()
serial: omap: fix potential NULL pointer dereference in serial_omap_runtime_suspend()
tty: serial: Enable uartlite for ARM zynq
...
Here's the big USB 3.11-rc1 merge request.
Lots of gadget and finally, chipidea driver updates (they were much
needed), along with a new host controller driver, lots of little serial
driver fixes, the removal of the 255 usb-serial device limitation, and a
variety of other minor things.
All of these have been in the linux-next releases for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlHRtqkACgkQMUfUDdst+ykIWACguGzwSkoBjh2q8p+M6l4zGwQI
fSAAoJvh8OKLWS7J3VkTWkyYy+Z2XV5d
=FdaG
-----END PGP SIGNATURE-----
Merge tag 'usb-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB updates from Greg KH:
"Here's the big USB 3.11-rc1 merge request.
Lots of gadget and finally, chipidea driver updates (they were much
needed), along with a new host controller driver, lots of little
serial driver fixes, the removal of the 255 usb-serial device
limitation, and a variety of other minor things.
All of these have been in the linux-next releases for a while"
* tag 'usb-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (254 commits)
usb: musb: omap2430: make it compile again
usb: chipidea: ci_hdrc_imx: access phy via private data
xhci: Add missing unlocks on error paths
USB: option,qcserial: move Novatel Gobi1K IDs to qcserial
ehci-atmel.c: prepare clk before calling enable
USB: ohci-at91: prepare clk before calling enable
USB: HWA: fix device probe failure
wusbcore: add entries in Documentation/ABI for new wusbhc sysfs attributes
wusbcore: add sysfs attribute for retry count
wusbcore: add sysfs attribute for DNTS count and interval
usb: chipidea: drop "13xxx" infix
usb: phy: tegra: remove duplicated include from phy-tegra-usb.c
usb: host: xhci-plat: release mem region while removing module
usbmisc_imx: allow autoloading on according to dt ids
usb: fix build error without CONFIG_USB_PHY
usb: check usb_hub_to_struct_hub() return value
xhci: check for failed dma pool allocation
usb: gadget: f_subset: fix missing unlock on error in geth_alloc()
usb: gadget: f_ncm: fix missing unlock on error in ncm_alloc()
usb: gadget: f_ecm: fix missing unlock on error in ecm_alloc()
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=Wjhu
-----END PGP SIGNATURE-----
Merge tag 'fscache-20130702' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull FS-Cache updates from David Howells:
"This contains a number of fixes for various FS-Cache issues plus some
cleanups. The commits are, in order:
1) Provide a system wait_on_atomic_t() and wake_up_atomic_t() sharing
the bit-wait table (enhancement for #8).
2) Don't put spin_lock() in a while-condition as spin_lock() may have
a do {} while(0) wrapper (cleanup).
3) Symbolically name i_mutex lock classes rather than using numbers
in CacheFiles (cleanup).
4) Don't sleep in page release if __GFP_FS is not set (deadlock vs
ext4).
5) Uninline fscache_object_init() (cleanup for #7).
6) Wrap checks on object state (cleanup for #7).
7) Simplify the object state machine by separating work states from
wait states.
8) Simplify cookie retention by objects (NULL pointer deref fix).
9) Remove unused list_to_page() macro (cleanup).
10) Make the remaining-pages counter in the retrieval op atomic
(assertion failure fix).
11) Don't use spin_is_locked() in assertions (assertion failure fix)"
* tag 'fscache-20130702' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
FS-Cache: Don't use spin_is_locked() in assertions
FS-Cache: The retrieval remaining-pages counter needs to be atomic_t
cachefiles: remove unused macro list_to_page()
FS-Cache: Simplify cookie retention for fscache_objects, fixing oops
FS-Cache: Fix object state machine to have separate work and wait states
FS-Cache: Wrap checks on object state
FS-Cache: Uninline fscache_object_init()
FS-Cache: Don't sleep in page release if __GFP_FS is not set
CacheFiles: name i_mutex lock class explicitly
fs/fscache: remove spin_lock() from the condition in while()
Add wait_on_atomic_t() and wake_up_atomic_t()
o remount_fs callback function
o restore parent inode number to enhance the fsync performance
o xattr security labels
o reduce the number of redundant lock/unlock data pages
o avoid frequent write_inode calls
The other minor bug fixes are as follows.
o endian conversion bugs
o various bugs in the roll-forward recovery routine
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=qFcy
-----END PGP SIGNATURE-----
Merge tag 'for-f2fs-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"This patch-set includes the following major enhancement patches:
- remount_fs callback function
- restore parent inode number to enhance the fsync performance
- xattr security labels
- reduce the number of redundant lock/unlock data pages
- avoid frequent write_inode calls
The other minor bug fixes are as follows.
- endian conversion bugs
- various bugs in the roll-forward recovery routine"
* tag 'for-f2fs-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (56 commits)
f2fs: fix to recover i_size from roll-forward
f2fs: remove the unused argument "sbi" of func destroy_fsync_dnodes()
f2fs: remove reusing any prefree segments
f2fs: code cleanup and simplify in func {find/add}_gc_inode
f2fs: optimize the init_dirty_segmap function
f2fs: fix an endian conversion bug detected by sparse
f2fs: fix crc endian conversion
f2fs: add remount_fs callback support
f2fs: recover wrong pino after checkpoint during fsync
f2fs: optimize do_write_data_page()
f2fs: make locate_dirty_segment() as static
f2fs: remove unnecessary parameter "offset" from __add_sum_entry()
f2fs: avoid freqeunt write_inode calls
f2fs: optimise the truncate_data_blocks_range() range
f2fs: use the F2FS specific flags in f2fs_ioctl()
f2fs: sync dir->i_size with its block allocation
f2fs: fix i_blocks translation on various types of files
f2fs: set sb->s_fs_info before calling parse_options()
f2fs: support xattr security labels
f2fs: fix iget/iput of dir during recovery
...
category, of note is a fix for on-line resizing file systems where the
block size is smaller than the page size (i.e., file systems 1k blocks
on x86, or more interestingly file systems with 4k blocks on Power or
ia64 systems.)
In the cleanup category, the ext4's punch hole implementation was
significantly improved by Lukas Czerner, and now supports bigalloc
file systems. In addition, Jan Kara significantly cleaned up the
write submission code path. We also improved error checking and added
a few sanity checks.
In the optimizations category, two major optimizations deserve
mention. The first is that ext4_writepages() is now used for
nodelalloc and ext3 compatibility mode. This allows writes to be
submitted much more efficiently as a single bio request, instead of
being sent as individual 4k writes into the block layer (which then
relied on the elevator code to coalesce the requests in the block
queue). Secondly, the extent cache shrink mechanism, which was
introduce in 3.9, no longer has a scalability bottleneck caused by the
i_es_lru spinlock. Other optimizations include some changes to reduce
CPU usage and to avoid issuing empty commits unnecessarily.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABCAAGBQJR0XhgAAoJENNvdpvBGATwMXkQAJwTPk5XYLqtAwLziFLvM6wG
0tWa1QAzTNo80tLyM9iGqI6x74X5nddLw5NMICUmPooOa9agMuA4tlYVSss5jWzV
yyB7vLzsc/2eZJusuVqfTKrdGybE+M766OI6VO9WodOoIF1l51JXKjktKeaWegfv
NkcLKlakD4V+ZASEDB/cOcR/lTwAs9dQ89AZzgPiW+G8Do922QbqkENJB8mhalbg
rFGX+lu9W0f3fqdmT3Xi8KGn3EglETdVd6jU7kOZN4vb5LcF5BKHQnnUmMlpeWMT
ksOVasb3RZgcsyf5ZOV5feXV601EsNtPBrHAmH22pWQy3rdTIvMv/il63XlVUXZ2
AXT3cHEvNQP0/yVaOTCZ9xQVxT8sL4mI6kENP9PtNuntx7E90JBshiP5m24kzTZ/
zkIeDa+FPhsDx1D5EKErinFLqPV8cPWONbIt/qAgo6663zeeIyMVhzxO4resTS9k
U2QEztQH+hDDbjgABtz9M/GjSrohkTYNSkKXzhTjqr/m5huBrVMngjy/F4/7G7RD
vSEx5aXqyagnrUcjsupx+biJ1QvbvZWOVxAE/6hNQNRGDt9gQtHAmKw1eG2mugHX
+TFDxodNE4iWEURenkUxXW3mDx7hFbGZR0poHG3M/LVhKMAAAw0zoKrrUG5c70G7
XrddRLGlk4Hf+2o7/D7B
=SwaI
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 update from Ted Ts'o:
"Lots of bug fixes, cleanups and optimizations. In the bug fixes
category, of note is a fix for on-line resizing file systems where the
block size is smaller than the page size (i.e., file systems 1k blocks
on x86, or more interestingly file systems with 4k blocks on Power or
ia64 systems.)
In the cleanup category, the ext4's punch hole implementation was
significantly improved by Lukas Czerner, and now supports bigalloc
file systems. In addition, Jan Kara significantly cleaned up the
write submission code path. We also improved error checking and added
a few sanity checks.
In the optimizations category, two major optimizations deserve
mention. The first is that ext4_writepages() is now used for
nodelalloc and ext3 compatibility mode. This allows writes to be
submitted much more efficiently as a single bio request, instead of
being sent as individual 4k writes into the block layer (which then
relied on the elevator code to coalesce the requests in the block
queue). Secondly, the extent cache shrink mechanism, which was
introduce in 3.9, no longer has a scalability bottleneck caused by the
i_es_lru spinlock. Other optimizations include some changes to reduce
CPU usage and to avoid issuing empty commits unnecessarily."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (86 commits)
ext4: optimize starting extent in ext4_ext_rm_leaf()
jbd2: invalidate handle if jbd2_journal_restart() fails
ext4: translate flag bits to strings in tracepoints
ext4: fix up error handling for mpage_map_and_submit_extent()
jbd2: fix theoretical race in jbd2__journal_restart
ext4: only zero partial blocks in ext4_zero_partial_blocks()
ext4: check error return from ext4_write_inline_data_end()
ext4: delete unnecessary C statements
ext3,ext4: don't mess with dir_file->f_pos in htree_dirblock_to_tree()
jbd2: move superblock checksum calculation to jbd2_write_superblock()
ext4: pass inode pointer instead of file pointer to punch hole
ext4: improve free space calculation for inline_data
ext4: reduce object size when !CONFIG_PRINTK
ext4: improve extent cache shrink mechanism to avoid to burn CPU time
ext4: implement error handling of ext4_mb_new_preallocation()
ext4: fix corruption when online resizing a fs with 1K block size
ext4: delete unused variables
ext4: return FIEMAP_EXTENT_UNKNOWN for delalloc extents
jbd2: remove debug dependency on debug_fs and update Kconfig help text
jbd2: use a single printk for jbd_debug()
...
Pull VFS patches (part 1) from Al Viro:
"The major change in this pile is ->readdir() replacement with
->iterate(), dealing with ->f_pos races in ->readdir() instances for
good.
There's a lot more, but I'd prefer to split the pull request into
several stages and this is the first obvious cutoff point."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (67 commits)
[readdir] constify ->actor
[readdir] ->readdir() is gone
[readdir] convert ecryptfs
[readdir] convert coda
[readdir] convert ocfs2
[readdir] convert fatfs
[readdir] convert xfs
[readdir] convert btrfs
[readdir] convert hostfs
[readdir] convert afs
[readdir] convert ncpfs
[readdir] convert hfsplus
[readdir] convert hfs
[readdir] convert befs
[readdir] convert cifs
[readdir] convert freevxfs
[readdir] convert fuse
[readdir] convert hpfs
reiserfs: switch reiserfs_readdir_dentry to inode
reiserfs: is_privroot_deh() needs only directory inode, actually
...
When sync does it's WB_SYNC_ALL writeback, it issues data Io and
then immediately waits for IO completion. This is done in the
context of the flusher thread, and hence completely ties up the
flusher thread for the backing device until all the dirty inodes
have been synced. On filesystems that are dirtying inodes constantly
and quickly, this means the flusher thread can be tied up for
minutes per sync call and hence badly affect system level write IO
performance as the page cache cannot be cleaned quickly.
We already have a wait loop for IO completion for sync(2), so cut
this out of the flusher thread and delegate it to wait_sb_inodes().
Hence we can do rapid IO submission, and then wait for it all to
complete.
Effect of sync on fsmark before the patch:
FSUse% Count Size Files/sec App Overhead
.....
0 640000 4096 35154.6 1026984
0 720000 4096 36740.3 1023844
0 800000 4096 36184.6 916599
0 880000 4096 1282.7 1054367
0 960000 4096 3951.3 918773
0 1040000 4096 40646.2 996448
0 1120000 4096 43610.1 895647
0 1200000 4096 40333.1 921048
And a single sync pass took:
real 0m52.407s
user 0m0.000s
sys 0m0.090s
After the patch, there is no impact on fsmark results, and each
individual sync(2) operation run concurrently with the same fsmark
workload takes roughly 7s:
real 0m6.930s
user 0m0.000s
sys 0m0.039s
IOWs, sync is 7-8x faster on a busy filesystem and does not have an
adverse impact on ongoing async data write operations.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch removes the fib_update_nh_saddrs() declaration from
include/net/ip_fib.h, as the fib_update_nh_saddrs() method was removed in
coomit 436c3b6 ("ipv4: Invalidate nexthop cache nh_saddr more correctly").
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The header file checksum.h is missing proper defines that prevents
it from double inclusion.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEbBAABAgAGBQJRxf9cAAoJEHm+PkMAQRiGMWkH911xM4gRmFgE7SqVW4F4AWBm
ngcqMqNy9IdqKfibORUUDvVfEa5gjD5ai2quIKpfQiaukbpQJ696H90ijuAkajLn
DQBrN243s0pzhhc/quWINnWxsFQ613JjdUMUMaD7e9A1aKjYzWrPGt/tSjrFXGCP
tArTupVzc/iOmnEQDKiROI/Nokq44QJ36aTGPM7n08xMtpKmkCXM+9/UosBteB0O
HVI33dmjwz7i55fI53XAWyuZCE+gSEnA4z8spJ9LfXso2W14V+roc+GuL6OyeeTI
pCn/+4niVPb4B0ROZlpyVmdZjbPPcMMEK5o+BSJI68SH6LHZTQh2iVuqYfpSyA==
=uUH5
-----END PGP SIGNATURE-----
Merge tag 'v3.10-rc7' into for-3.11/drivers
Linux 3.10-rc7
Pull this in early to avoid doing it with the bcache merge,
since there are a number of changes to bcache between my old
base (3.10-rc1) and the new pull request.
We should get rid of all own SCTP debug printk macros and use the ones
that the kernel offers anyway instead. This makes the code more readable
and conform to the kernel code, and offers all the features of dynamic
debbuging that pr_debug() et al has, such as only turning on/off portions
of debug messages at runtime through debugfs. The runtime cost of having
CONFIG_DYNAMIC_DEBUG enabled, but none of the debug statements printing,
is negligible [1]. If kernel debugging is completly turned off, then these
statements will also compile into "empty" functions.
While we're at it, we also need to change the Kconfig option as it /now/
only refers to the ifdef'ed code portions in outqueue.c that enable further
debugging/tracing of SCTP transaction fields. Also, since SCTP_ASSERT code
was enabled with this Kconfig option and has now been removed, we
transform those code parts into WARNs resp. where appropriate BUG_ONs so
that those bugs can be more easily detected as probably not many people
have SCTP debugging permanently turned on.
To turn on all SCTP debugging, the following steps are needed:
# mount -t debugfs none /sys/kernel/debug
# echo -n 'module sctp +p' > /sys/kernel/debug/dynamic_debug/control
This can be done more fine-grained on a per file, per line basis and others
as described in [2].
[1] https://www.kernel.org/doc/ols/2009/ols2009-pages-39-46.pdf
[2] Documentation/dynamic-debug-howto.txt
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no such path as /sys/parameters, module parameters live in
/sys/module/*/parameters.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There is no reason to return "int" as this function never fails.
Furthermore, several drivers (ast, sis) already depend on this.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit d202cce896
sunrpc: never return expired entries in sunrpc_cache_lookup
moved the 'entry is expired' test from cache_check to
sunrpc_cache_lookup, so that it happened early and some races could
safely be ignored.
However the ip_map (in svcauth_unix.c) has a separate single-item
cache which allows quick lookup without locking. An entry in this
case would not be subject to the expiry test and so could be used
well after it has expired.
This is not normally a big problem because the first time it is used
after it is expired an up-call will be scheduled to refresh the entry
(if it hasn't been scheduled already) and the old entry will then
be invalidated. So on the second attempt to use it after it has
expired, ip_map_cached_get will discard it.
However that is subtle and not ideal, so replace the "!cache_valid"
test with "cache_is_expired".
In doing this we drop the test on the "CACHE_VALID" bit. This is
unnecessary as the bit is never cleared, and an entry will only
be cached if the bit is set.
Reported-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It is possible for a race to set CACHE_PENDING after cache_clean()
has removed a cache entry from the cache.
If CACHE_PENDING is still set when the entry is finally 'put',
the cache_dequeue() will never happen and we can leak memory.
So set a new flag 'CACHE_CLEANED' when we remove something from
the cache, and don't queue any upcall if it is set.
If CACHE_PENDING is set before CACHE_CLEANED, the call that
cache_clean() makes to cache_fresh_unlocked() will free memory
as needed. If CACHE_PENDING is set after CACHE_CLEANED, the
test in sunrpc_cache_pipe_upcall will ensure that the memory
is not allocated.
Reported-by: <bstroesser@ts.fujitsu.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Store a pointer to the gss mechanism used in the rq_cred and cl_cred.
This will make it easier to enforce SP4_MACH_CRED, which needs to
compare the mechanism used on the exchange_id with that used on
protected operations.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Change Low Latency Sockets code for select and poll so that
when LLS is disabled sched_clock() is never called.
Also, avoid sending POLL_LL to sockets if disabled.
Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Our use of sched_clock is OK because we don't mind the side effects
of calling it and occasionally waking up on a different CPU.
When CONFIG_DEBUG_PREEMPT is on, disable preempt before calling
sched_clock() so we don't trigger a debug_smp_processor_id() warning.
Reported-by: Cody P Schafer <devel-lists@codyps.com>
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville says:
====================
Yet one more pull request for wireless updates intended for 3.11...
For the mac80211 bits, Johannes says:
"Here we have a few memory leak fixes related to BSS struct handling
mostly from Ben, including a fix for a more theoretical problem
(associating while a BSS struct times out) from myself, a compilation
warning fix from Arend, mesh fixes from Thomas, tracking the beacon
bitrate (Alex), a bandwidth change event fix (Ilan) and some initial
work for 5/10 MHz channels from Simon."
Regarding the iwlwifi bits, Johannes says:
"Emmanuel removed some unneeded/unsupported module parameters and adds a
Bluetooth 1x1 lookup-table for some upcoming products. From Alex I have
an older patch to add low-power receive support, this depended on a
mac80211 commit that only just came in with the merge from wireless-next
I did. Ilan made beacon timings better, and Eytan added some debug
statements for thermal throttling. I have a few cleanups, a fix for a
long-standing but rare warning, and, arguably the most important patch
here, the firmware API version bump for the 7260/3160 devices."
Also included is a Bluetooth pull -- Gustavo says:
"Here goes a set of patches to 3.11. The biggest work here is from Andre Guedes
on the move of the Discovery to use the new request framework. Other than that
Johan provided a bunch of fixes to the L2CAP code. The rest are just small
fixes and clean ups."
On top of all that, there are a variety of updates and fixes to
brcmfmac, rt2x00, wil6210, ath9k, ath10k, and a few others here and
there. This also includes a pull of the wireless tree, in order to
prevent some merge conflicts.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When the firmware supports the UPDATE_QP command, if the VF link is disabled,
block all QPs opened by the VF, by programming the UPDATE_QP command to drop
all RX & TX traffic to/from these QPs. Operates only in VST mode.
Signed-off-by: Rony Efraim <ronye@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Within VST mode, enable modifying the vlan and/or qos
for a VF without requiring unbind/rebind.
This requires firmware which supports the UPDATE_QP command.
(If the command is not available, we fall back to requiring
unbind/bind to activate these changes).
To avoid race conditions with modify-qp on QPs that are affected
by update-qp, this operation is performed on the comm_wq.
If the update operation succeeds for all the necessary QPs, a
vlan_unregister is performed for the abandoned vlan id.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to roll our own polling scheme when we already have
one implemented by the core.
Tested-by: Manish Badarkhe <badarkhe.manish@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add the firmware header format which is used by Broadcom Cable Modem
SoCs such as the BCM3368 SoC. We export the bcm_hcs firmware format
structure because it is used by user-land tools to create firmware
images for these SoCs and will later be used by a corresponding MTD
parser.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/5496/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch fixes a sparse warning in the omap remoteproc code
when OMAP_REMOTEPROC is disabled.
include/linux/platform_data/remoteproc-omap.h:76:13: warning: symbol 'omap_rproc_reserve_cma' was not declared. Should it be static?
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
If jbd2_journal_restart() fails the handle will have been disconnected
from the current transaction. In this situation, the handle must not
be used for for any jbd2 function other than jbd2_journal_stop().
Enforce this with by treating a handle which has a NULL transaction
pointer as an aborted handle, and issue a kernel warning if
jbd2_journal_extent(), jbd2_journal_get_write_access(),
jbd2_journal_dirty_metadata(), etc. is called with an invalid handle.
This commit also fixes a bug where jbd2_journal_stop() would trip over
a kernel jbd2 assertion check when trying to free an invalid handle.
Also move the responsibility of setting current->journal_info to
start_this_handle(), simplifying the three users of this function.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Younger Liu <younger.liu@huawei.com>
Cc: Jan Kara <jack@suse.cz>
Translate the bitfields used in various flags argument to strings to
make the tracepoint output more human-readable.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for-next/hugepages' of git://git.linaro.org/people/stevecapper/linux:
ARM64: mm: THP support.
ARM64: mm: Raise MAX_ORDER for 64KB pages and THP.
ARM64: mm: HugeTLB support.
ARM64: mm: Move PTE_PROT_NONE bit.
ARM64: mm: Make PAGE_NONE pages read only and no-execute.
ARM64: mm: Restore memblock limit when map_mem finished.
mm: thp: Correct the HPAGE_PMD_ORDER check.
x86: mm: Remove general hugetlb code from x86.
mm: hugetlb: Copy general hugetlb code from x86 to mm.
x86: mm: Remove x86 version of huge_pmd_share.
mm: hugetlb: Copy huge_pmd_share from x86 to mm.
Conflicts:
arch/arm64/Kconfig
arch/arm64/include/asm/pgtable-hwdef.h
arch/arm64/include/asm/pgtable.h
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJR0K2gAAoJEHm+PkMAQRiGWsEH+gMZSN1qRm34hZ82q1Tx7HvL
Eb/Gsl3Qw/7G2TlTqgjBUs36IdqV9O2cui/aa3/TfXvdvrx+0GlhRkEwQPc+ygcO
Mvoyoke4tT4+4jVFdCg1J8avREsa28/6oaHs0ZZxuVmJBBLTJH7aXaNsGn6eU1q9
9+p798MQis6naIiPC63somlZcCIiBhsuWCPWpEfLMn8G1HWAFTM3xXIbNBqe/brS
bmIOfhomlIZ5dcdaXGvjtP3+KJhkNDwhkPC4tVYu8JqqgSlrE+a+EGyEuuGqKk10
U+swiqyuD31uBI9ga54u/2FzSqDiAu6YOcMXevjo/m3g9XLdYbYLvN+nvN8alCQ=
=Ob6Z
-----END PGP SIGNATURE-----
Merge tag 'v3.10' into sched/core
Merge in a recent upstream commit:
c2853c8df5 include/linux/math64.h: add div64_ul()
because:
72a4cf20cb sched: Change cfs_rq load avg to unsigned long
relies on it.
[ We don't rebase sched/core for this, because the handful of
followup commits after the broken commit are not behavioral
changes so are unlikely to be needed during bisection. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Header size is needed to distinguish between header and the dump data.
Incorporate the addition of new argument (hsize) in the pstore write
callback.
Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJR0K2gAAoJEHm+PkMAQRiGWsEH+gMZSN1qRm34hZ82q1Tx7HvL
Eb/Gsl3Qw/7G2TlTqgjBUs36IdqV9O2cui/aa3/TfXvdvrx+0GlhRkEwQPc+ygcO
Mvoyoke4tT4+4jVFdCg1J8avREsa28/6oaHs0ZZxuVmJBBLTJH7aXaNsGn6eU1q9
9+p798MQis6naIiPC63somlZcCIiBhsuWCPWpEfLMn8G1HWAFTM3xXIbNBqe/brS
bmIOfhomlIZ5dcdaXGvjtP3+KJhkNDwhkPC4tVYu8JqqgSlrE+a+EGyEuuGqKk10
U+swiqyuD31uBI9ga54u/2FzSqDiAu6YOcMXevjo/m3g9XLdYbYLvN+nvN8alCQ=
=Ob6Z
-----END PGP SIGNATURE-----
Merge tag 'v3.10' into next
Merge 3.10 in order to get some of the last minute powerpc
changes, resolve conflicts and add additional fixes on top
of them.
Cypress TrueTouch(tm) Standard Product controllers,
Generetion4 devices, Core driver.
Core driver is interface between host and TTSP controller and processes
data sent by controller.
Responsibilities of module are IRQ handling, reading system information
registers and sending multi-touch protocol type B events.
Signed-off-by: Ferruh Yigit <fery@cypress.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pablo Neira Ayuso says:
====================
The following batch contains Netfilter/IPVS updates for net-next,
they are:
* Enforce policy to several nfnetlink subsystem, from Daniel
Borkmann.
* Use xt_socket to match the third packet (to perform simplistic
socket-based stateful filtering), from Eric Dumazet.
* Avoid large timeout for picked up from the middle TCP flows,
from Florian Westphal.
* Exclude IPVS from struct net if IPVS is disabled and removal
of unnecessary included header file, from JunweiZhang.
* Release SCTP connection immediately under load, to mimic current
TCP behaviour, from Julian Anastasov.
* Replace and enhance SCTP state machine, from Julian Anastasov.
* Add tweak to reduce sync traffic in the presence of persistence,
also from Julian Anastasov.
* Add tweak for the IPVS SH scheduler not to reject connections
directed to a server, choose a new one instead, from Alexander
Frolkin.
* Add support for sloppy TCP and SCTP modes, that creates state
information on any packet, not only initial handshake packets,
from Alexander Frolkin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
These were all used by the open coded I/O and IRQ implementations and are
no longer referenced now that the regmap core variants are used instead.
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This patch adds Device Tree support to max8998 driver.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This patch modifies the platform data of max8998 to use arrays for
specifying predefined voltages of buck1 and buck2 instead of separate
field for each voltage.
This allows to simplify the code a bit and will help in adding support
for Device Tree, which will be introduced in further patch.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This patch adds irq domain support for max8998 interrupts.
To keep both non-DT and DT worlds happy, simple domain is used, which is
linear when no explicit IRQ base is specified and legacy, with static
mapping, otherwise.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The common case is that TCP/IP checksums have already been
verified, e.g. by hardware (rx checksum offload), or conntrack.
Userspace can use this flag to determine when the checksum
has not been validated yet.
If the flag is set, this doesn't necessarily mean that the packet has
an invalid checksum, e.g. if NIC doesn't support rx checksum.
Userspace that sucessfully enabled NFQA_CFG_F_GSO queue feature flag can
infer that IP/TCP checksum has already been validated if either the
SKB_INFO attribute is not present or the NFQA_SKB_CSUM_NOTVERIFIED
flag is unset.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* pm-cpufreq:
cpufreq: don't leave stale policy pointer in cdbs->cur_policy
acpi-cpufreq: Add new sysfs attribute freqdomain_cpus
cpufreq: make sure frequency transitions are serialized
Currently, the hashing that the locking code uses to add these values
to the blocked_hash is simply calculated using fl_owner field. That's
valid in most cases except for server-side lockd, which validates the
owner of a lock based on fl_owner and fl_pid.
In the case where you have a small number of NFS clients doing a lot
of locking between different processes, you could end up with all
the blocked requests sitting in a very small number of hash buckets.
Add a new lm_owner_key operation to the lock_manager_operations that
will generate an unsigned long to use as the key in the hashtable.
That function is only implemented for server-side lockd, and simply
XORs the fl_owner and fl_pid.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Testing has shown that iterating over the blocked_list for deadlock
detection turns out to be a bottleneck. In order to alleviate that,
begin the process of turning it into a hashtable. We start by turning
the fl_link into a hlist_node and the global lists into hlists. A later
patch will do the conversion of the blocked_list to a hashtable.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Having a global lock that protects all of this code is a clear
scalability problem. Instead of doing that, move most of the code to be
protected by the i_lock instead. The exceptions are the global lists
that the ->fl_link sits on, and the ->fl_block list.
->fl_link is what connects these structures to the
global lists, so we must ensure that we hold those locks when iterating
over or updating these lists.
Furthermore, sound deadlock detection requires that we hold the
blocked_list state steady while checking for loops. We also must ensure
that the search and update to the list are atomic.
For the checking and insertion side of the blocked_list, push the
acquisition of the global lock into __posix_lock_file and ensure that
checking and update of the blocked_list is done without dropping the
lock in between.
On the removal side, when waking up blocked lock waiters, take the
global lock before walking the blocked list and dequeue the waiters from
the global list prior to removal from the fl_block list.
With this, deadlock detection should be race free while we minimize
excessive file_lock_lock thrashing.
Finally, in order to avoid a lock inversion problem when handling
/proc/locks output we must ensure that manipulations of the fl_block
list are also protected by the file_lock_lock.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 66189be74 (CIFS: Fix VFS lock usage for oplocked files) exported
the locks_delete_block symbol. There's already an exported helper
function that provides this capability however, so make cifs use that
instead and turn locks_delete_block back into a static function.
Note that if fl->fl_next == NULL then this lock has already been through
locks_delete_block(), so we should be OK to ignore an ENOENT error here
and simply not retry the lock.
Cc: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Instances either don't look at it at all (the majority of cases) or
only want it to find the superblock (which can be had as dentry->d_sb).
A few cases that want more are actually safe with dentry->d_inode -
the only precaution needed is the check that it hadn't been replaced with
NULL by rmdir() or by overwriting rename(), which case should be simply
treated as cache miss.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
the only remaining caller (in ncpfs) is guaranteed to return 0 -
we only hit it if we'd just checked that there's no dentry with
such name.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Replace a bunch of file->dentry->d_inode refs with file_inode().
In __fput(), use file->f_inode instead so as not to be affected by any tricks
that file_inode() might grow.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
O_TMPFILE | O_CREAT => linkat() with AT_SYMLINK_FOLLOW and /proc/self/fd/<n>
as oldpath (i.e. flink()) will create a link
O_TMPFILE | O_CREAT | O_EXCL => ENOENT on attempt to link those guys
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
new helper: dir_relax(inode). Call when you are in location that will
_not_ be invalidated by directory modifications (block boundary, in case
of ext*). Returns whether the directory has survived (dropping i_mutex
allows rmdir to kill the sucker; if it returns false to us, ->iterate()
is obviously done)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
New method - ->iterate(file, ctx). That's the replacement for ->readdir();
it takes callback from ctx->actor, uses ctx->pos instead of file->f_pos and
calls dir_emit(ctx, ...) instead of filldir(data, ...). It does *not*
update file->f_pos (or look at it, for that matter); iterate_dir() does the
update.
Note that dir_emit() takes the offset from ctx->pos (and eventually
filldir_t will lose that argument).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
iterate_dir(): new helper, replacing vfs_readdir().
struct dir_context: contains the readdir callback (and will get more stuff
in it), embedded into whatever data that callback wants to deal with;
eventually, we'll be passing it to ->readdir() replacement instead of
(data,filldir) pair.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Marc Kleine-Budde says:
====================
this is a pull-request for net-next/master. It consists of three
patches by Fabio Estevam and me, which convert the flexcan transceiver
switching to DT[1] and a patch by Sachin Kamat, which cleans up the
at91_can driver a bit.
[1] These patches touch arch/arm/mach-imx, so I collected Acked-bys
from Shawn Guo and Sascha Hauer.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit d2d68ba9 (ipv4: Cache input routes in fib_info nexthops)
assmued that "locally destined, and routed packets, never trigger
PMTU events or redirects that will be processed by us".
However, it seems that tunnel devices do trigger PMTU events in certain
cases. At least ip_gre, ip6_gre, sit, and ipip do use the inner flow's
skb_dst(skb)->ops->update_pmtu to propage mtu information from the
outer flows. These can cause the inner flow mtu to be decreased. If
next hop exceptions are not consulted for pmtu, IP fragmentation will
not be done properly for these routes.
It also seems that we really need to have the PMTU information always
for netfilter TCPMSS clamp-to-pmtu feature to work properly.
So for the time being, cache separate copies of input routes for
each next hop exception.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC3590/RFC3810 specifies we should resend MLD reports as soon as a
valid link-local address is available.
We now use the valid_ll_addr_cnt to check if it is necessary to resend
a new report.
Changes since Flavio Leitner's version:
a) adapt for valid_ll_addr_cnt
b) resend first reports directly in the path and just arm the timer for
mc_qrv-1 resends.
Reported-by: Flavio Leitner <fleitner@redhat.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Stevens <dlstevens@us.ibm.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To reduce the number of unnecessary router solicitations, MLDv2 and IGMPv3
messages we need to track the number of valid (as in non-optimistic,
no-dad-failed and non-tentative) link-local addresses. Therefore, this
patch implements a valid_ll_addr_cnt in struct inet6_dev.
We now only emit router solicitations if the first link-local address
finishes duplicate address detection.
The changes for MLDv2 and IGMPv3 are in a follow-up patch.
While there, also simplify one if statement(one minor nit I made in one
of my previous patches):
if (!...)
do();
else
return;
<<into>>
if (...)
return;
do();
Cc: Flavio Leitner <fbl@redhat.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Cc: David Stevens <dlstevens@us.ibm.com>
Suggested-by: David Stevens <dlstevens@us.ibm.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to linux/device.h, move of_node struct member out of the #ifdef
CONFIG_OF so that the drivers won't have to mess with #ifdefs in .c files.
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
If the clock was set (stepped), set the action parameter to functions
in the pvclock gtod notifier chain to non-zero. This allows the
callee to only do work if the clock was stepped.
This will be used on Xen as the synchronization of the Xen wallclock
to the control domain's (dom0) system time will be done with this
notifier and updating on every timer tick is unnecessary and too
expensive.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: <xen-devel@lists.xen.org>
Link: http://lkml.kernel.org/r/1372329348-20841-4-git-send-email-david.vrabel@citrix.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* labeled-nfs:
NFS: Apply v4.1 capabilities to v4.2
NFS: Add in v4.2 callback operation
NFS: Make callbacks minor version generic
Kconfig: Add Kconfig entry for Labeled NFS V4 client
NFS: Extend NFS xattr handlers to accept the security namespace
NFS: Client implementation of Labeled-NFS
NFS: Add label lifecycle management
NFS:Add labels to client function prototypes
NFSv4: Extend fattr bitmaps to support all 3 words
NFSv4: Introduce new label structure
NFSv4: Add label recommended attribute and NFSv4 flags
NFSv4.2: Added NFS v4.2 support to the NFS client
SELinux: Add new labeling type native labels
LSM: Add flags field to security_sb_set_mnt_opts for in kernel mount data.
Security: Add Hook to test if the particular xattr is part of a MAC model.
Security: Add hook to calculate context based on a negative dentry.
NFS: Add NFSv4.2 protocol constants
Conflicts:
fs/nfs/nfs4proc.c
Ensure the colorspace is properly adjusted by the driver for YUV
and Bayer image formats. The subdev try_fmt helper is simplified.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The comment for the FM_RX class was copied from the DV class unchanged.
Fixed.
Also made the FM_TX comment consistent with the others.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
In scan_async_group() if the size parameter is negative, the sasd pointer
will be used uninitialised:
drivers/media/platform/soc_camera/soc_camera.c: In function "soc_camera_host_register":
drivers/media/platform/soc_camera/soc_camera.c:1514:55: warning: "sasd" may
be used uninitialized in this function [-Wmaybe-uninitialized]
sasd->asd.match.i2c.adapter_id, sasd->asd.match.i2c.address);
^
drivers/media/platform/soc_camera/soc_camera.c:1464:34: note: "sasd" was
declared here
struct soc_camera_async_subdev *sasd;
Fix this by making "size" and the array, from which it is assigned unsigned.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Convert printks to pr_<level> (excludes printk(KERN_DEBUG...)
to be more consistent throughout the xen subsystem.
Add pr_fmt with KBUILD_MODNAME or "xen:" KBUILD_MODNAME
Coalesce formats and add missing word spaces
Add missing newlines
Align arguments and reflow to 80 columns
Remove DRV_NAME from formats as pr_fmt adds the same content
This does change some of the prefixes of these messages
but it also does make them more consistent.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Allow to change the AL layout with an resize operation. For that
the reisze command gets two new fields: al_stripes and al_stripe_size.
In order to make the operation crash save:
1) Lock out all IO and MD-IO
2) Write the super block with MDF_PRIMARY_IND clear
3) write the bitmap to the new location (all zeros, since
we allow only while connected)
4) Initialize the new AL-area
5) Write the super block with the restored MDF_PRIMARY_IND.
6) Unfreeze all IO
Since the AL-layout has no influence on the protocol, this operation
needs to be beforemed on both sides of a resource (if intended).
Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Konrad writes:
It has the 'feature-max-indirect-segments' implemented in both backend
and frontend. The current problem with the backend and frontend is that the
segment size is limited to 11 pages. It means we can at most squeeze in 44kB per
request. The ring can hold 32 (next power of two below 36) requests, meaning we
can do 1.4M of outstanding requests. Nowadays that is not enough.
The problem in the past was addressed in two ways - but neither one went upstream.
The first solution to this proposed by Justin from Spectralogic was to negotiate
the segment size. This means that the ‘struct blkif_sring_entry’ is now a variable size.
It can expand from 112 bytes (cover 11 pages of data - 44kB) to 1580 bytes
(256 pages of data - so 1MB). It is a simple extension by just making the array in the
request expand from 11 to a variable size negotiated. But it had limits: this extension
still limits the number of segments per request to 255 (as the total number must be
specified in the request, which only has an 8-bit field for that purpose).
The other solution (from Intel - Ronghui) was to create one extra ring that only has the
‘struct blkif_request_segment’ in them. The ‘struct blkif_request’ would be changed to have
an index in said ‘segment ring’. There is only one segment ring. This means that the size of
the initial ring is still the same. The requests would point to the segment and enumerate out
how many of the indexes it wants to use. The limit is of course the size of the segment.
If one assumes a one-page segment this means we can in one request cover ~4MB.
Those patches were posted as RFC and the author never followed up on the ideas on changing
it to be a bit more flexible.
There is yet another mechanism that could be employed (which these patches implement) - and it
borrows from VirtIO protocol. And that is the ‘indirect descriptors’. This very similar to
what Intel suggests, but with a twist. The twist is to negotiate how many of these
'segment' pages (aka indirect descriptor pages) we want to support (in reality we negotiate
how many entries in the segment we want to cover, and we module the number if it is
bigger than the segment size).
This means that with the existing 36 slots in the ring (single page) we can cover:
32 slots * each blkif_request_indirect covers: 512 * 4096 ~= 64M. Since we ample space
in the blkif_request_indirect to span more than one indirect page, that number (64M)
can be also multiplied by eight = 512MB.
Roger Pau Monne took the idea and implemented them in these patches. They work
great and the corner cases (migration between backends with and without this extension)
work nicely. The backend has a limit right now off how many indirect entries
it can handle: one indirect page, and at maximum 256 entries (out of 512 - so 50% of the page
is used). That comes out to 32 slots * 256 entries in a indirect page * 1 indirect page
per request * 4096 = 32MB.
This is a conservative number that can change in the future. Right now it strikes
a good balance between giving excellent performance, memory usage in the backend, and
balancing the needs of many guests.
In the patchset there is also the split of the blkback structure to be per-VBD.
This means that the spinlock contention we had with many guests trying to do I/O and
all the blkback threads hitting the same lock has been eliminated.
Also there are bug-fixes to deal with oddly sized sectors, insane amounts on
th ring, and also a security fix (posted earlier).
Some more fixes and enhancements, and also a bunch of refectoring for
AC'97 support which enables more than one AC'97 controller driver to be
built in.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=UZaY
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: More updates for v3.11
Some more fixes and enhancements, and also a bunch of refectoring for
AC'97 support which enables more than one AC'97 controller driver to be
built in.
* freezer:
af_unix: use freezable blocking calls in read
sigtimedwait: use freezable blocking call
nanosleep: use freezable blocking call
futex: use freezable blocking call
select: use freezable blocking call
epoll: use freezable blocking call
binder: use freezable blocking calls
freezer: add new freezable helpers using freezer_do_not_count()
freezer: convert freezable helpers to static inline where possible
freezer: convert freezable helpers to freezer_do_not_count()
freezer: skip waking up tasks with PF_FREEZER_SKIP set
freezer: shorten freezer sleep time using exponential backoff
lockdep: check that no locks held at freeze time
lockdep: remove task argument from debug_check_no_locks_held
freezer: add unsafe versions of freezable helpers for CIFS
freezer: add unsafe versions of freezable helpers for NFS
* acpi-assorted:
ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan
ACPI: Add CMOS RTC Operation Region handler support
ACPI: Remove unused flags in acpi_device_flags
ACPI: Remove useless initializers
ACPI / battery: Make sure all spaces are in correct places
ACPI: add _STA evaluation at do_acpi_find_child()
ACPI / EC: access user space with get_user()/put_user()
* acpi-pm:
ACPI / PM: Rework and clean up acpi_dev_pm_get_state()
ACPI / PM: Replace ACPI_STATE_D3 with ACPI_STATE_D3_COLD in device_pm.c
ACPI / PM: Rename function acpi_device_power_state() and make it static
ACPI / PM: acpi_processor_suspend() can be static
xen / ACPI / sleep: Register an acpi_suspend_lowlevel callback.
x86 / ACPI / sleep: Provide registration for acpi_suspend_lowlevel.
* acpica: (21 commits)
ACPICA: Update version to 20130517
ACPICA: _CST repair: Handle null package entries
ACPICA: Add several repairs for _CST predefined name
ACPICA: Move _PRT repair into the standard complex repair module
ACPICA: Clear events initialized flag upon event component termination
ACPICA: Fix possible memory leak in GPE init error path
ACPICA: ACPICA Termination: Delete global lock pending lock
ACPICA: Update interface to acpi_ut_valid_acpi_name()
ACPICA: Do not use extended sleep registers unless HW-reduced bit is set
ACPICA: Split table print utilities to a new a separate file
ACPICA: Add option to disable loading of SSDTs from the RSDT/XSDT
ACPICA: Standardize all switch() blocks
ACPICA: Split internal error msg routines to a separate file
ACPICA: Split buffer dump routines into separate file
ACPICA: Update version to 20130418
ACPICA: Update for "orphan" embedded controller _REG method support
ACPICA: Remove unused macros, no functional change
ACPICA: Predefined name support: Remove unused local variable
ACPICA: Add argument typechecking for all predefined ACPI names
ACPICA: Add BIOS error interface for predefined name validation support
...
This reverts commit 160954b7bc.
This was rearming the workqueue with a 0 timeout, causing
a WARN_ON, and possible loop.
Daniel writes:
"I've looked a bit into this and I think we need to have a separate
work struct for recovering these lost hotplug events since the
continuous self-rearming case is a real risk (e.g. if a connector
flip-flops all the time). At least I don't see a sane way to block out
re-arming with the current code in a simple way. So reverting the
offender seems like the right thing and I'll go back to the drawing
board for 3.12."
Signed-off-by: Dave Airlie <airlied@redhat.com>
The char arrays with size 44 are for the name string of
snd_ctl_elem_id. Define the constant and replace the raw numbers with
it for clarifying better.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is the second part of OMAP DSS changes for 3.11. This part contains the
new DSS device model support.
The current OMAP panel drivers use a custom DSS bus, and there's a hard limit
of one external display block per video pipeline. In the new DSS device model
the devices/drivers are made according to the control bus of the display block,
usually platform, i2c or spi. The display blocks can also be chained so that we
can have separate drivers for setups with both external encoder and panel.
To allow the current board files, which use the old style panels, to function,
the old display drivers are left in their current state, and new ones are added
to drivers/video/omap2/displays-new/. When the board files have been converted
to use the new style panels, we can remove the old code. This is planned to
happen in v3.12.
Having to support two very different DSS device models makes the driver
somewhat confusing in some parts, and prevents us from properly cleaning up
some other parts. These cleanups will be done when the old code is removed.
The new device model is designed with CDF (Common Display Framework) in mind.
While CDF is still under work, the new DSS device model should be much more
similar to CDF's model than the old device model, which should make the
eventual conversion to CDF much easier.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=yEcM
-----END PGP SIGNATURE-----
Merge tag 'omapdss-for-3.11-2' of git://gitorious.org/linux-omap-dss2/linux into fbdev/for-next
OMAP display subsystem changes for 3.11 (part 2/2)
This is the second part of OMAP DSS changes for 3.11. This part contains the
new DSS device model support.
The current OMAP panel drivers use a custom DSS bus, and there's a hard limit
of one external display block per video pipeline. In the new DSS device model
the devices/drivers are made according to the control bus of the display block,
usually platform, i2c or spi. The display blocks can also be chained so that we
can have separate drivers for setups with both external encoder and panel.
To allow the current board files, which use the old style panels, to function,
the old display drivers are left in their current state, and new ones are added
to drivers/video/omap2/displays-new/. When the board files have been converted
to use the new style panels, we can remove the old code. This is planned to
happen in v3.12.
Having to support two very different DSS device models makes the driver
somewhat confusing in some parts, and prevents us from properly cleaning up
some other parts. These cleanups will be done when the old code is removed.
The new device model is designed with CDF (Common Display Framework) in mind.
While CDF is still under work, the new DSS device model should be much more
similar to CDF's model than the old device model, which should make the
eventual conversion to CDF much easier.
This is the first part of OMAP DSS changes for 3.11. This part contains fixes,
cleanups and reorganizations that are not directly related to the new DSS
device model that is added in part 2, although many of the reorganizations are
made to make the part 2 possible.
There should not be any functional changes visible to the user except the few
bug fixes.
The main new internal features:
- Display (dis)connect support, which allows us to explicitly (dis)connect a
whole display pipeline
- Panel list, which allows us to operate without the specific DSS bus
- Combine omap_dss_output to omap_dss_device, so that we have one generic
"entity" for display pipeline blocks
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=I6Y2
-----END PGP SIGNATURE-----
Merge tag 'omapdss-for-3.11-1' of git://gitorious.org/linux-omap-dss2/linux into fbdev/for-next
OMAP display subsystem changes for 3.11 (part 1/2)
This is the first part of OMAP DSS changes for 3.11. This part contains fixes,
cleanups and reorganizations that are not directly related to the new DSS
device model that is added in part 2, although many of the reorganizations are
made to make the part 2 possible.
There should not be any functional changes visible to the user except the few
bug fixes.
The main new internal features:
- Display (dis)connect support, which allows us to explicitly (dis)connect a
whole display pipeline
- Panel list, which allows us to operate without the specific DSS bus
- Combine omap_dss_output to omap_dss_device, so that we have one generic
"entity" for display pipeline blocks
Since (c05cdb1 netlink: allow large data transfers from user-space),
netlink splats if it invokes skb_clone on large netlink skbs since:
* skb_shared_info was not correctly initialized.
* skb->destructor is not set in the cloned skb.
This was spotted by trinity:
[ 894.990671] BUG: unable to handle kernel paging request at ffffc9000047b001
[ 894.991034] IP: [<ffffffff81a212c4>] skb_clone+0x24/0xc0
[...]
[ 894.991034] Call Trace:
[ 894.991034] [<ffffffff81ad299a>] nl_fib_input+0x6a/0x240
[ 894.991034] [<ffffffff81c3b7e6>] ? _raw_read_unlock+0x26/0x40
[ 894.991034] [<ffffffff81a5f189>] netlink_unicast+0x169/0x1e0
[ 894.991034] [<ffffffff81a601e1>] netlink_sendmsg+0x251/0x3d0
Fix it by:
1) introducing a new netlink_skb_clone function that is used in nl_fib_input,
that sets our special skb->destructor in the cloned skb. Moreover, handle
the release of the large cloned skb head area in the destructor path.
2) not allowing large skbuffs in the netlink broadcast path. I cannot find
any reasonable use of the large data transfer using netlink in that path,
moreover this helps to skip extra skb_clone handling.
I found two more netlink clients that are cloning the skbs, but they are
not in the sendmsg path. Therefore, the sole client cloning that I found
seems to be the fib frontend.
Thanks to Eric Dumazet for helping to address this issue.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows to switch the netns when packet is encapsulated or
decapsulated. In other word, the encapsulated packet is received in a netns,
where the lookup is done to find the tunnel. Once the tunnel is found, the
packet is decapsulated and injecting into the corresponding interface which
stands to another netns.
When one of the two netns is removed, the tunnel is destroyed.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The goal of this new function is to perform all needed cleanup before sending
an skb into another netns.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1672d04070 ("cgroup: fix cgroupfs_root early destruction path")
introduced CGRP_ROOT_SUBSYS_BOUND which is used to mark completion of
subsys binding on a new root; however, this broke remounts.
cgroup_remount() doesn't allow changing root options via remount and
CGRP_ROOT_SUBSYS_BOUND, which is set on all fully initialized roots,
makes the function reject all remounts.
Fix it by putting the options part in the lower 16 bits of root->flags
and masking the comparions. While at it, make cgroup_remount() emit
an error message explaining why it's rejecting a remount request, so
that it's less of a mystery.
Signed-off-by: Tejun Heo <tj@kernel.org>
Now that the code is compatible in semantics, flip the switch.
Use ww_mutex instead of the homegrown implementation.
ww_mutex uses -EDEADLK to signal that the caller has to back off,
and -EALREADY to indicate this buffer is already held by the caller.
ttm used -EAGAIN and -EDEADLK for those, respectively. So some changes
were needed to handle this correctly.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This commit converts the source of the val_seq counter to
the ww_mutex api. The reservation objects are converted later,
because there is still a lockdep splat in nouveau that has to
resolved first.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds support for a generic reservations framework that can be
hooked up to ttm and dma-buf and allows easy sharing of reservations
across devices.
The idea is that a dma-buf and ttm object both will get a pointer
to a struct reservation_object, which has to be reserved before
anything is done with the contents of the dma-buf.
Changes since v1:
- Fix locking issue in ticket_reserve, which could cause mutex_unlock
to be called too many times.
Changes since v2:
- All fence related calls and members have been taken out for now,
what's left is the bare minimum to be useful for ttm locking conversion.
Changes since v3:
- Removed helper functions too. The documentation has an example
implementation for locking. With the move to ww_mutex there is no
need to have much logic any more.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is the pull request for radeon for 3.11. Highlights include:
- Support for CIK (Sea Islands) asics: 3D, compute, UVD
- DPM (Dynamic Power Management) support for 6xx-SI
- ASPM support for 6xx-SI
- Assorted bug fixes
* 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux: (168 commits)
drm/radeon/SI: fix TDP adjustment in set_power_state
drm/radeon/NI: fix TDP adjustment in set_power_state
drm/radeon: fix endian issues in atombios dpm code
drm/radeon/dpm: fix UVD clock setting on SI
drm/radeon/dpm: fix UVD clock setting on cayman
drm/radeon/dpm: add support for setting UVD clock on rv6xx
drm/radeon/dpm: add support for setting UVD clock on rs780
drm/radeon: fix typo in ni_print_power_state
drm/radeon: fix typo in cik_select_se_sh()
drm/radeon/si: fix typo in function name
drm/radeon/dpm: fix typo in setting uvd clock
drm/radeon/dpm: add dpm_set_power_state failure output (si)
add dpm_set_power_state failure output (7xx-ni)
drm/radeon/dpm: add dpm_set_power_state failure output (7xx-ni)
drm/radeon/dpm: add dpm_enable failure output (si)
drm/radeon/dpm: add dpm_enable failure output (7xx-ni)
drm/radeon/kms: add dpm support for SI (v7)
drm/radeon: switch SI to use radeon_ucode.h
drm/radeon: add SI to r600_is_internal_thermal_sensor()
drm/radeon/dpm/rs780: properly catch errors in dpm setup
...
Last 3.11 feature pull. I have a few odds bits and pieces and fixes in my
queue, I'll sort them out later on to see what's for 3.11-fixes and what's
for 3.12. But nothing to hold this here up imo.
Highlights:
- more hangcheck work from Mika and Chris to prepare for arb robustness
- trickle feed fixes from Ville
- first parts of the shared pch pll rework, with some basic hw state
readout and cross-checking (this shuts up the confused pch pll refcount
WARN that Linus just recently forwarded)
- Haswell audio power well support from Wang Xingchao (alsa bits acked by
Takashi)
- some cleanups and asserts sprinkling around the plane/gamma enabling
sequence from Ville
- more gtt refactoring from Ben
- clear up the adjusted->mode vs. pixel clock vs. port clock confusion
- 30bpp support, this time for real hopefully
* tag 'drm-intel-next-2013-06-18' of git://people.freedesktop.org/~danvet/drm-intel: (97 commits)
drm/i915: remove a superflous semi-colon
drm/i915: Kill useless "Enable panel fitter" comments
drm/i915: Remove extra "ring" from error message
drm/i915: simplify the reduced clock handling for pch plls
drm/i915: stop killing pfit on i9xx
drm/i915: explicitly set up PIPECONF (and gamma table) on haswell
drm/i915: set up PIPECONF explicitly for i9xx/vlv platforms
drm/i915: set up PIPECONF explicitly on ilk-ivb
drm/i915: find guilty batch buffer on ring resets
drm/i915: store ring hangcheck action
drm/i915: add batch bo to i915_add_request()
drm/i915: change i915_add_request to macro
drm/i915: add i915_gem_context_get_hang_stats()
drm/i915: add struct i915_ctx_hang_stats
drm/i915: Try harder to disable trickle feed on VLV
drm/i915: fix up pch pll enabling for pixel multipliers
drm/i915: hw state readout and cross-checking for shared dplls
drm/i915: WARN on lack of shared dpll
drm/i915: split up intel_modeset_check_state
drm/i915: extract readout_hw_state from setup_hw_state
...
Conflicts:
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_fb.c
drivers/gpu/drm/i915/intel_sdvo.c
These changes are mostly minor fixes to things introduced in 3.10. The
biggest chunk is updates to the host1x firewall which checks job
submissions from userspace and wasn't working properly. All other
patches are mostly one-liners. Nothing new or too exciting this time
around.
* 'drm/for-next' of git://anongit.freedesktop.org/tegra/linux:
gpu: host1x: Rework CPU syncpoint increment
gpu: host1x: Fix client_managed type
gpu: host1x: Fix memory access in syncpt request
gpu: host1x: Copy gathers before verification
gpu: host1x: Don't reset firewall between gathers
gpu: host1x: Check reloc table before usage
gpu: host1x: Check INCR opcode correctly
drm/tegra: Remove DRIVER_BUS_PLATFORM from driver_features
drm/tegra: Fix return value
drm/tegra: Include header drm/drm.h
MAINTAINERS: Update Tegra DRM entry
drm/tegra: fix error return code in gr2d_submit()
drm/tegra: fix missing unlock on error
drm/tegra: Honor pixel-format changes
drm/tegra: Explicitly set irq_enabled
drm/tegra: Don't disable unused planes
Required for certain driver calculations. Code
was written by Christian König and ported to the
drm by me.
v2: fix 64 bit divides
v3: fix 64 bit for real (math64.h)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So it looks like for virtual hw cursors on QXL we need to inform
the "hw" device what the cursor hotspot parameters are. This
makes sense if you think the host has to draw the cursor and interpret
clicks from it. However the current modesetting interface doesn't support
passing the hotspot information from userspace.
This implements a new cursor ioctl, that takes the hotspot info as well,
userspace can try calling the new interface and if it gets -ENOSYS it means
its on an older kernel and can just fallback.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Commits fcf8058 (cpufreq: Simplify cpufreq_add_dev()) and aa77a52
(cpufreq: acpi-cpufreq: Don't set policy->related_cpus from .init())
changed the contents of the "related_cpus" sysfs attribute on systems
where acpi-cpufreq is used and user space can't get the list of CPUs
which are in the same hardware coordination CPU domain (provided by
the ACPI AML method _PSD) via "related_cpus" any more.
To make up for that loss add a new sysfs attribute "freqdomian_cpus"
for the acpi-cpufreq driver which exposes the list of CPUs in the
same domain regardless of whether it is coordinated by hardware or
software.
[rjw: Changelog, documentation]
References: https://bugzilla.kernel.org/show_bug.cgi?id=58761
Reported-by: Jean-Philippe Halimi <jean-philippe.halimi@exascale-computing.eu>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Whenever we are changing frequency of a cpu, we are calling PRECHANGE and
POSTCHANGE notifiers. They must be serialized. i.e. PRECHANGE or POSTCHANGE
shouldn't be called twice contiguously.
This can happen due to bugs in users of __cpufreq_driver_target() or actual
cpufreq drivers who are sending these notifiers.
This patch adds some protection against this. Now, we keep track of the last
transaction and see if something went wrong.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
DMA engine of some old SDIO host controllers require block size alignment for
data length of each scatterlist item. This patch introduces an intermediate
buffer list to support this kind of platform. It decreases the throughput
because of an extra memcpy in critical data path. So don't turn this on unless
it's necessary.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
GMT G762/763 fan speed PWM controller is connected directly to a fan
and performs closed-loop or open-loop control of the fan speed. Two
modes - PWM or DC - are supported by the chip. Introduced driver
provides various knobs to control the operations of the chip (via
sysfs interface). Specific characteristics of the system can be passed
either using board init code or via DT. Documentation for both the
driver and DT bindings are also provided.
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Tested-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Although the HC supports HS200 (eMMC) the caps2 are always zero; this
means there's no way to use the super speed mode (when init the card).
If the HC support SDR104, for SD3.0, so it also supports HS200 for eMMC
and this patch just sets the MMC_CAP2_HS200 in the host caps2 field.
Reported-by: Youssef Triki <youssef.triki@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Reviewed-by: Philip Rakity <prakity@nvidia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
MMC_CAP2_FULL_PWR_CYCLE shall be set by host drivers which are able to
do a complete power cycle of the card. In the eMMC case that includes
both vcc and vccq.
This CAP is providing the protocol layer with important information,
needed to take optimized decisions during card initialization and in
the suspend/resume sequence.
MMC_CAP2_POWEROFF_NOTIFY is replaced by MMC_CAP2_FULL_PWR_CYCLE, since
it makes sense to use a wider scope for it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Considering shutdown of the card, the responsibility to initate this
sequence shall be driven from the mmc_bus.
This patch enables the mmc_bus to handle this sequence properly. A new
.shutdown callback is added in the mmc_driver struct which is used to
shutdown the blk device.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
In order to make it possible to reduce the SD bus frequency,
parse the optional "max-frequency" attribute as documented in
devicetree/bindings/mmc/mmc.txt
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
In addition to just logging errors encountered during DT parsing or
allocating GPIO slots for CD/WP, mmc_of_parse() now returns with an error.
In particular, this is needed if the GPIO allocation may return
EPROBE_DEFER.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
As there are no more users of the flexcan platform file, let's remove it.
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
HSCIF support by Ulrich Hecht.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=bnU/
-----END PGP SIGNATURE-----
Merge tag 'renesas-sh-sci-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/late
Renesas sh-sci updates for v3.11
HSCIF support by Ulrich Hecht.
* tag 'renesas-sh-sci-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
serial: sh-sci: Initialise variables before access in sci_set_termios()
ARM: shmobile: r8a7790: don't use external clock for SCIFs
ARM: shmobile: r8a7790: HSCIF support
serial: sh-sci: HSCIF support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge in the tip core/mutexes branch for future GPU driver use.
Ingo will send this branch to Linus prior to drm-next.
* 'core/mutexes' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
locking-selftests: Handle unexpected failures more strictly
mutex: Add more w/w tests to test EDEADLK path handling
mutex: Add more tests to lib/locking-selftest.c
mutex: Add w/w tests to lib/locking-selftest.c
mutex: Add w/w mutex slowpath debugging
mutex: Add support for wound/wait style locks
arch: Make __mutex_fastpath_lock_retval return whether fastpath succeeded or not
powerpc/pci: Fix boot panic on mpc83xx (regression)
s390/ipl: Fix FCP WWPN and LUN format strings for read
fs: fix new splice.c kernel-doc warning
spi/pxa2xx: fix memory corruption due to wrong size used in devm_kzalloc()
s390/mem_detect: fix memory hole handling
s390/dma: support debug_dma_mapping_error
s390/dma: fix mapping_error detection
s390/irq: Only define synchronize_irq() on SMP
Input: xpad - fix for "Mad Catz Street Fighter IV FightPad" controllers
Input: wacom - add a new stylus (0x100802) for Intuos5 and Cintiqs
spi/pxa2xx: use GFP_ATOMIC in sg table allocation
fuse: hold i_mutex in fuse_file_fallocate()
Input: add missing dependencies on CONFIG_HAS_IOMEM
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEbBAABAgAGBQJRxf9cAAoJEHm+PkMAQRiGMWkH911xM4gRmFgE7SqVW4F4AWBm
ngcqMqNy9IdqKfibORUUDvVfEa5gjD5ai2quIKpfQiaukbpQJ696H90ijuAkajLn
DQBrN243s0pzhhc/quWINnWxsFQ613JjdUMUMaD7e9A1aKjYzWrPGt/tSjrFXGCP
tArTupVzc/iOmnEQDKiROI/Nokq44QJ36aTGPM7n08xMtpKmkCXM+9/UosBteB0O
HVI33dmjwz7i55fI53XAWyuZCE+gSEnA4z8spJ9LfXso2W14V+roc+GuL6OyeeTI
pCn/+4niVPb4B0ROZlpyVmdZjbPPcMMEK5o+BSJI68SH6LHZTQh2iVuqYfpSyA==
=uUH5
-----END PGP SIGNATURE-----
Merge tag 'v3.10-rc7' into drm-next
Linux 3.10-rc7
The sdvo lvds fix in this -fixes pull
commit c3456fb3e4
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Jun 10 09:47:58 2013 +0200
drm/i915: prefer VBT modes for SVDO-LVDS over EDID
has a silent functional conflict with
commit 990256aec2
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Fri May 31 12:17:07 2013 +0000
drm: Add probed modes in probe order
in drm-next. W simply need to add the vbt modes before edid modes, i.e. the
other way round than now.
Conflicts:
drivers/gpu/drm/drm_prime.c
drivers/gpu/drm/i915/intel_sdvo.c
There's a race window (small for hpd, 10s large for polled outputs)
where userspace could sneak in with an unrelated connnector probe
ioctl call and eat the hotplug event (since neither the hpd nor the
poll code see a state change).
To avoid this, check whether the connector state changes in all other
->detect calls (in the current helper code that's only probe_single)
and if that's the case, fire off a hotplug event. Note that we can't
directly call the hotplug event handler, since that expects that no
locks are held (due to reentrancy with the fb code to update the kms
console).
Also, this requires that drivers using the probe_single helper
function set up the poll work. All current drivers do that already,
and with the reworked hpd handling there'll be no downside to
unconditionally setting up the poll work any more.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Shuffle the defines around so that it is clear that BTN_A, BTN_B, etc are
legacy definitions and not an accidental typos that need their own key codes.
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Until today all gamepad input drivers report their data differently. It is
nearly impossible to write applications for more than one device in a
generic way. Therefore, this patch introduces a uniform gamepad API which
will be used for all new drivers.
Instead of mapping buttons by their labels, we now map them by position.
This allows applications to work with any gamepad regardless of the labels
on the buttons. Furthermore, we standardize the ABS_* codes for analog
triggers and sticks.
For D-Pads the long overdue BTN_DPAD_* codes are introduced. They should
be fairly obvious how to use. To avoid confusion, the action buttons now
have BTN_EAST/SOUTH/WEST/NORTH aliases.
Reported-by: Todd Showalter <todd@electronjump.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
drm_get_connector_name now returns a const value, which causes the following
compilation warning:
drivers/gpu/drm/drm_fb_helper.c: In function ‘drm_fb_helper_parse_command_line’:
drivers/gpu/drm/drm_fb_helper.c:127:3: warning: passing argument 1 of ‘fb_get_options’ discards ‘const’ qualifier from pointer target type [enabled by default]
In file included from drivers/gpu/drm/drm_fb_helper.c:35:0:
include/linux/fb.h:627:12: note: expected ‘char *’ but argument is of type ‘const char *’
As fb_get_options uses its name argument as read only, make it const. This
fixes the aforementioned compilation warning.
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: trivial@kernel.org
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Currently we can only have a single platform built in with AC'97 support
due to the use of a global variable to provide the bus operations. Fix
this by making that variable a pointer and having the bus drivers set the
operations prior to registering.
This is not a particularly good or nice approach but it avoids blocking
multiplatform and a real fix involves fixing the fairly deep problems
with AC'97 support - we should be converting it to a real bus.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Remove CONFIG_FAIR_GROUP_SCHED that covers the runnable info, then
we can use runnable load variables.
Also remove 2 CONFIG_FAIR_GROUP_SCHED setting which is not in reverted
patch(introduced in 9ee474f), but also need to revert.
Signed-off-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/51CA76A3.3050207@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit ffa3fd21de ("videomode: implement public of_get_display_timing()") causes
the following build warning:
include/video/of_display_timing.h:18:10: warning: 'struct display_timing' declared inside parameter list [enabled by default]
include/video/of_display_timing.h:18:10: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
Declare 'display_timing' to avoid the build warning.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Pull networking fixes from David Miller:
1) Found via trinity:
If you connect up an ipv6 socket to an ipv4 mapped address then an
ipv6 one, sendmsg() can croak because ip6_sk_dst_check() assumes the
route cached in the socket is an ipv6 one. In this case there is an
ipv4 route attached, so it gets stomped on.
Reported by Dave Jones and Hannes Frederic Sowa, fixed by Eric
Dumazet.
2) AF_KEY notifications leak some kernel memory to userspace, fix from
Mathias Krause.
3) DLCI calls __dev_get_by_name() without proper locking, and dlci_del
doesn't validate that the device being deleted is actually a DLCI
one. Fixes from Li Zefan.
4) Length check on bluetooth l2cap information responses is wrong, each
response type has a different lenth, so we should make sure it's in
a given range rather than enforce one single valid length. From
Jaganath Kanakkassery.
5) Receive FIFO overflow is really easy to trigger in stress scenerios
in the sh_eth driver, but the event isn't being handled properly at
all. Specifically, the mask of error interrupts doesn't include the
event so we never clear it, resulting in the driver becomming wedged
processing an interrupt that never gets cleared.
Fix from Sergei Shtylyov.
6) qlcnic sleeps while holding a spinlock, use mdelay() instead of
msleep(). From Shahed Shaikh.
7) Missing curly braces causes SIP netfilter NAT module to always drop
packets. Fix from Balazs Peter Odor.
8) ipt_ULOG in netfilter passes the wrong value to timer setup, causing
the timer to dereference crap when it fires. Fix from Gao Feng.
9) Missing RCU protection around txq->axq_acq traversal in
ath_txq_schedule(). Fix from Felix Fietkau.
10) Idle state transition test in ath9k_htc_config() is reversed, fix
from Sujith Manoharan.
11) IPV6 forwarding handles unicast Router Alert packets incorrectly.
It tests the wrong option state. Previously opt->ra being non-zero
indicated a router alert marking in the SKB, but now it's indicated
by a bit in opt->flags. Fix from YOSHIFUJI Hideaki.
12) SKB leak in GRE tunnel GSO handling, from Eric Dumazet.
13) get_user_pages_fast() error handling in TUN and MACVTAP use the same
local variable for the base index and the loop iterator for page
traversal, oops! Fix from Michael S Tsirkin.
14) ipv6_get_lladdr() can fail, and we must therefore check it's return
value in inet6_set_iftoken(). For from Hannes Frederic Sowa.
15) If you change an interface name and meanwhile can sneak in something
that looks up the name (like SO_BINDTODEVICE or SIOCGIFNAME) we can
deadlock with CONFIG_PREEMPT=n. Fix this by providing a helper
function that properly uses raw_seqcount_begin(). From Nicolas
Schichan.
16) Chain noise calibration test is inverted in iwlwifi, fix from
Nikolay Martynov.
17) Properly set TX iwlwifi descriptor flags for back requests. Fix
from Emmanuel Grumbach.
18) We can't assume skb_transport_header() is set in xt_TCPOPTSTRAP
module, fix from Pablo Neira Ayuso.
19) Some crummy APs don't provide the proper High Throughput info in
association response frames. Add a workaround by assume we'll use
whatever is in the beacon/probe. Fix from Johannes Berg.
20) mac80211 call to rate_idx_match_mask() swaps two arguments (mask and
channel width). Fix from Simon Wunderlich.
21) xt_TCPMSS (like xt_TCPOPTSTRAP) must not try to handle fragmented
frames. Fix from Phil Oester.
22) Fix rate control regression causing iwlwifi/iwlegacy chips to use
1Mbit/s on pre-11n networks. From Moshe Benji and Stanslaw Gruszka.
23) Disable brcmsmac power-save functions, they cause regressions. From
Arend van Spriel.
24) Enforce a sane minimum MTU in l2cap_build_cmd() otherwise we can
easily crash. Fix from Anderson Lizardo.
25) If a learning packet arrives during vxlan_stop() we crash, easily
fixed by checking netif_running(). From Stephen Hemminger.
26) Static vxlan FDB entries should not be migrated, also from Stephen.
27) skb_clone() failures not handled in vxlan_xmit(), oops. Also from
Stephen.
28) Add minimal driver for AR816x/AR817x ethernet chips, from Johannes
Berg.
29) Fix regression in userspace VLAN acceleration control, added by the
802.1ad support changes. Fix from Fernando Luis Vazquez Cao.
30) Interval selection for MLD queries in the bridging code was
reversed. Fix from Linus Lüssing.
31) ipv6's ndisc_send_redirect() erroneously writes to the packet we
received not the packet we are building to send out. Fix from
Matthias Schiffer.
32) Don't free netdev before unregistering it, in usb_8dev can driver.
From Marc Kleine-Budde.
33) Fix nl80211 attribute buffer races, from Johannes Berg.
34) Although netlink_diag.h is under uapi/ it isn't present in Kbuild.
From Stephen Hemminger.
35) Wrong address and family passed to MD5 key lookups in TCP, from
Aydin Arik.
36) phy_type attribute created by SFC driver should not be writable.
From Ben Hutchings.
37) Receive/Transmit queue allocations in pxa168_eth and mv643xx_eth
should use kzalloc(). Otherwise if setup fails half-way, we'll
dereference garbage when trying to teardown the rings. From Lubomir
Rintel.
38) Fix double-allocation of dst (resulting in unfreeable net device) in
ipv6's init_loopback(). From Gao Feng.
39) Fix fragmentation handling SKB leak in netfilter conntrack, we were
freeing the wrong skb pointer. From Phil Oester.
40) Don't report "-1" (SPEED_UNKNOWN) in bond_miimon_commit(), from
Nikolay Aleksandrov.
41) davinci_cpdma doesn't check for DMA mapping errors, letting the
device scribble to random addresses. From Sebastian Siewior.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits)
dlci: validate the net device in dlci_del()
dlci: acquire rtnl_lock before calling __dev_get_by_name()
af_key: fix info leaks in notify messages
ipv6: ip6_sk_dst_check() must not assume ipv6 dst
net: fix kernel deadlock with interface rename and netdev name retrieval.
net/tg3: Avoid delay during MMIO access
ipv6: check return value of ipv6_get_lladdr
macvtap: fix recovery from gup errors
tun: fix recovery from gup errors
gre: fix a possible skb leak
ipv6: Process unicast packet with Router Alert by checking flag in skb.
ath9k_htc: Handle IDLE state transition properly
ath9k: fix an RCU issue in calling ieee80211_get_tx_rates
netfilter: ipt_ULOG: fix incorrect setting of ulog timer
netfilter: ctnetlink: send event when conntrack label was modified
netfilter: nf_nat_sip: fix mangling
qlcnic: Do not sleep while holding spinlock
drivers: net: cpsw: fix compilation error with cpsw driver
tcp: doc : fix the syncookies default value
sh_eth: fix misreporting of transmit abort
...
This is the kernel part of the modification to extract the net params
from the ibft sysfs to the iface struct used for the connection
request upon sync_session in the open-iscsi util.
Three new session sysfs params are defined:
boot_root - holds the name of the /sys/firmware/ibft or iscsi_rootN
boot_nic - holds the ethernetN name
boot_target - holds the targetN name
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Old gcc doesnt like the struct hack, and it is kind of ugly. So finish
off the work to convert pr_debug() statements to tracepoints, and delete
pkey()/pbtree().
Signed-off-by: Kent Overstreet <koverstreet@google.com>
The tracepoints were reworked to be more sensible, and fixed a null
pointer deref in one of the tracepoints.
Converted some of the pr_debug()s to tracepoints - this is partly a
performance optimization; it used to be that with DEBUG or
CONFIG_DYNAMIC_DEBUG pr_debug() was an empty macro; but at some point it
was changed to an empty inline function.
Some of the pr_debug() statements had rather expensive function calls as
part of the arguments, so this code was getting run unnecessarily even
on non debug kernels - in some fast paths, too.
Signed-off-by: Kent Overstreet <koverstreet@google.com>
The R-Car Display Unit (DU) DRM driver supports both superposition
processors and all eight planes in RGB and YUV formats with alpha
blending.
Only VGA and LVDS encoders and connectors are currently supported.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
* pci/misc:
MAINTAINERS: Add ACPI folks for ACPI-related things under drivers/pci
PCI: Add CircuitCo vendor ID and subsystem ID
PCI: Use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)
Add CircuitCo's newly created VENDOR ID and their first board subsystem
ID for the MinnowBoard.
[bhelgaas: sort, change DEVICE_ID to SUBSYSTEM_ID]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
When the kernel (compiled with CONFIG_PREEMPT=n) is performing the
rename of a network interface, it can end up waiting for a workqueue
to complete. If userland is able to invoke a SIOCGIFNAME ioctl or a
SO_BINDTODEVICE getsockopt in between, the kernel will deadlock due to
the fact that read_secklock_begin() will spin forever waiting for the
writer process (the one doing the interface rename) to update the
devnet_rename_seq sequence.
This patch fixes the problem by adding a helper (netdev_get_name())
and using it in the code handling the SIOCGIFNAME ioctl and
SO_BINDTODEVICE setsockopt.
The netdev_get_name() helper uses raw_seqcount_begin() to avoid
spinning forever, waiting for devnet_rename_seq->sequence to become
even. cond_resched() is used in the contended case, before retrying
the access to give the writer process a chance to finish.
The use of raw_seqcount_begin() will incur some unneeded work in the
reader process in the contended case, but this is better than
deadlocking the system.
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
Just one patch this time.
1) Drop packets when the matching SA is in larval state and add a
statistic counter for that. From Fan Du.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Platforms may want to provide architecture-specific functionality when
a pci device is released. Add a pcibios_release_device() call that
architectures can override to do so.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The arch_timer irq numbers (or PPI numbers) are implementation dependent,
so the host virtual timer irq number can be different from guest virtual
timer irq number.
This patch ensures that host virtual timer irq number is read from DTB and
guest virtual timer irq is determined based on vcpu target type.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
task->cgroups is a RCU pointer pointing to struct css_set. A task
switches to a different css_set on cgroup migration but a css_set
doesn't change once created and its pointers to cgroup_subsys_states
aren't RCU protected.
task_subsys_state[_check]() is the macro to acquire css given a task
and subsys_id pair. It RCU-dereferences task->cgroups->subsys[] not
task->cgroups, so the RCU pointer task->cgroups ends up being
dereferenced without read_barrier_depends() after it. It's broken.
Fix it by introducing task_css_set[_check]() which does
RCU-dereference on task->cgroups. task_subsys_state[_check]() is
reimplemented to directly dereference ->subsys[] of the css_set
returned from task_css_set[_check]().
This removes some of sparse RCU warnings in cgroup.
v2: Fixed unbalanced parenthsis and there's no need to use
rcu_dereference_raw() when !CONFIG_PROVE_RCU. Both spotted by Li.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
cgroupfs_root used to have ->actual_subsys_mask in addition to
->subsys_mask. a8a648c4ac ("cgroup: remove
cgroup->actual_subsys_mask") removed it noting that the subsys_mask is
essentially temporary and doesn't belong in cgroupfs_root; however,
the patch made it impossible to tell whether a cgroupfs_root actually
has the subsystems bound or just have the bits set leading to the
following BUG when trying to mount with subsystems which are already
mounted elsewhere.
kernel BUG at kernel/cgroup.c:1038!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
...
CPU: 1 PID: 7973 Comm: mount Tainted: G W 3.10.0-rc7-next-20130625-sasha-00011-g1c1dc0e #1105
task: ffff880fc0ae8000 ti: ffff880fc0b9a000 task.ti: ffff880fc0b9a000
RIP: 0010:[<ffffffff81249b29>] [<ffffffff81249b29>] rebind_subsystems+0x409/0x5f0
...
Call Trace:
[<ffffffff8124bd4f>] cgroup_kill_sb+0xff/0x210
[<ffffffff813d21af>] deactivate_locked_super+0x4f/0x90
[<ffffffff8124f3b3>] cgroup_mount+0x673/0x6e0
[<ffffffff81257169>] cpuset_mount+0xd9/0x110
[<ffffffff813d2580>] mount_fs+0xb0/0x2d0
[<ffffffff81404afd>] vfs_kern_mount+0xbd/0x180
[<ffffffff814070b5>] do_new_mount+0x145/0x2c0
[<ffffffff814085d6>] do_mount+0x356/0x3c0
[<ffffffff8140873d>] SyS_mount+0xfd/0x140
[<ffffffff854eb600>] tracesys+0xdd/0xe2
We still want rebind_subsystems() to take added/removed masks, so
let's fix it by marking whether a cgroupfs_root has finished binding
or not. Also, document what's going on around ->subsys_mask
initialization so that similar mistakes aren't repeated.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Delete all audit rules that were checking how the .cpuXYZ
related sections were inter-operating with other __init
like sections, now that __cpuinit is gone. Update the linker
script to not have any knowledge of .cpuinit sections.
[lds.h update courtesy of Ralf Baechle <ralf@linux-mips.org>]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
As an interim step, we can dummy out the macros to be no-ops, and
this will allow us to avoid a giant tree-wide patch, and instead
we can feed in smaller chunks mainly via the arch/ trees. This
is in keeping with commit 78d86c213f
("init.h: Remove __dev* sections from the kernel")
We don't strictly need to dummy out the macros to do this, but if
we don't then some harmless section mismatch warnings may temporarily
result. For example, notify_cpu_starting() and cpu_up() are arch
independent (kernel/cpu.c) and are flagged as __cpuinit. And hence
the calling functions in the arch specific code are also expected
to be __cpuinit -- if not, then we get the section mismatch warning.
Two of the three __CPUINIT variants are not used whatsoever, and
so they are simply removed directly at this point in time.
[1] https://lkml.org/lkml/2013/5/20/589
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Injects EDEADLK conditions at pseudo-random interval, with
exponential backoff up to UINT_MAX (to ensure that every lock
operation still completes in a reasonable time).
This way we can test the wound slowpath even for ww mutex users
where contention is never expected, and the ww deadlock
avoidance algorithm is only needed for correctness against
malicious userspace. An example would be protecting kernel
modesetting properties, which thanks to single-threaded X isn't
really expected to contend, ever.
I've looked into using the CONFIG_FAULT_INJECTION
infrastructure, but decided against it for two reasons:
- EDEADLK handling is mandatory for ww mutex users and should
never affect the outcome of a syscall. This is in contrast to -ENOMEM
injection. So fine configurability isn't required.
- The fault injection framework only allows to set a simple
probability for failure. Now the probability that a ww mutex acquire
stage with N locks will never complete (due to too many injected
EDEADLK backoffs) is zero. But the expected number of ww_mutex_lock
operations for the completely uncontended case would be O(exp(N)).
The per-acuiqire ctx exponential backoff solution choosen here only
results in O(log N) overhead due to injection and so O(log N * N)
lock operations. This way we can fail with high probability (and so
have good test coverage even for fancy backoff and lock acquisition
paths) without running into patalogical cases.
Note that EDEADLK will only ever be injected when we managed to
acquire the lock. This prevents any behaviour changes for users
which rely on the EALREADY semantics.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: rostedt@goodmis.org
Cc: daniel@ffwll.ch
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20130620113117.4001.21681.stgit@patser
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Wound/wait mutexes are used when other multiple lock
acquisitions of a similar type can be done in an arbitrary
order. The deadlock handling used here is called wait/wound in
the RDBMS literature: The older tasks waits until it can acquire
the contended lock. The younger tasks needs to back off and drop
all the locks it is currently holding, i.e. the younger task is
wounded.
For full documentation please read Documentation/ww-mutex-design.txt.
References: https://lwn.net/Articles/548909/
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: rostedt@goodmis.org
Cc: daniel@ffwll.ch
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/51C8038C.9000106@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This will allow me to call functions that have multiple
arguments if fastpath fails. This is required to support ticket
mutexes, because they need to be able to pass an extra argument
to the fail function.
Originally I duplicated the functions, by adding
__mutex_fastpath_lock_retval_arg. This ended up being just a
duplication of the existing function, so a way to test if
fastpath was called ended up being better.
This also cleaned up the reservation mutex patch some by being
able to call an atomic_set instead of atomic_xchg, and making it
easier to detect if the wrong unlock function was previously
used.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: robclark@gmail.com
Cc: rostedt@goodmis.org
Cc: daniel@ffwll.ch
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20130620113105.4001.83929.stgit@patser
Signed-off-by: Ingo Molnar <mingo@kernel.org>
no real problem is fixed, just save a few bytes in
net_namespace structure.
Signed-off-by: JunweiZhang <junwei.zhang@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Add sync_persist_mode flag to reduce sync traffic
by syncing only persistent templates.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Tested-by: Aleksey Chudov <aleksey.chudov@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
By default the SH scheduler rejects connections that are hashed onto a
realserver of weight 0. This patch adds a flag to make SH choose a
different realserver in this case, instead of rejecting the connection.
The patch also adds a flag to make SH include the source port (TCP, UDP,
SCTP) in the hash as well as the source address. This basically allows
for deterministic round-robin load balancing (i.e., where any director
in a cluster of directors with identical config will send the same
packet the same way).
The flags are service flags (IP_VS_SVC_F_SCHED*) so that these options
can be set per service. They are set using a new option to ipvsadm.
Signed-off-by: Alexander Frolkin <avf@eldamar.org.uk>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Convert the SCTP state table, so that it is more readable.
Change the states to be according to the diagram in RFC 2960
and add more states suitable for middle box. Still, such
change in states adds incompatibility if systems in sync
setup include this change and others do not include it.
With this change we also have proper transitions in INPUT-ONLY
mode (DR/TUN) where we see packets only from client. Now
we should not switch to 10-second CLOSED state at a time
when we should stay in ESTABLISHED state.
The short names for states are because we have 16-char space
in ipvsadm and 11-char limit for the connection list format.
It is a sequence of the TCP implementation where the longest
state name is ESTABLISHED.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
This adds support for sloppy TCP and SCTP modes to IPVS.
When enabled (sysctls net.ipv4.vs.sloppy_tcp and
net.ipv4.vs.sloppy_sctp), allows IPVS to create connection state on any
packet, not just a TCP SYN (or SCTP INIT).
This allows connections to fail over from one IPVS director to another
mid-flight.
Signed-off-by: Alexander Frolkin <avf@eldamar.org.uk>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Before now the schedulers needed access only to IP
addresses and it was easy to get them from skb by
using ip_vs_fill_iph_addr_only.
New changes for the SH scheduler will need the protocol
and ports which is difficult to get from skb for the
IPv6 case. As we have all the data in the iph structure,
to avoid the same slow lookups provide the iph to schedulers.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
This patch refactoring existing iscsit_send_text_rsp() in order
to handle iscsi_text_rsp payloads in a transport specific manner.
This includes the addition of iscsit_build_text_rsp() to build
the response payload and initialize ISCSI_OP_TEXT_RSP.
v2: Make iscsit_build_text_rsp() determine extra padding bytes, and
drop legacy padding calculation for traditional iSCSI text
responses within iscsit_send_text_rsp()
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch fixes the below 3 warnings running "make htmldocs",
by adding descriptions for recently added structure members:
DOCPROC Documentation/DocBook/device-drivers.xml
Warning(/work/git.free-electrons.com/users/michael-opdenacker/linux//include/linux/device.h:116): No description found for parameter 'lock_key'
Warning(/work/git.free-electrons.com/users/michael-opdenacker/linux//include/linux/device.h:723): No description found for parameter 'cma_area'
Warning(/work/git.free-electrons.com/users/michael-opdenacker/linux//include/linux/device.h:723): No description found for parameter 'iommu_group'
Don't hesitate to propose better descriptions!
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the user issues TUNSETOFFLOAD ioctl, macvtap does not do
anything other then to verify arguments. This patch adds
functionality to allow users to actually control offload features.
NETIF_F_GSO and NETIF_F_GRO are always on, but the rest of the
features can be controlled.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
select/poll busy-poll support.
Split sysctl value into two separate ones, one for read and one for poll.
updated Documentation/sysctl/net.txt
Add a new poll flag POLL_LL. When this flag is set, sock_poll will call
sk_poll_ll if possible. sock_poll sets this flag in its return value
to indicate to select/poll when a socket that can busy poll is found.
When poll/select have nothing to report, call the low-level
sock_poll again until we are out of time or we find something.
Once the system call finds something, it stops setting POLL_LL, so it can
return the result to the user ASAP.
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, SCTP code defines its own timeval functions (since timeval
is rarely used inside the kernel by others), namely tv_lt() and
TIMEVAL_ADD() macros, that operate on SCTP cookie expiration.
We might as well remove all those, and operate directly on ktime
structures for a couple of reasons: ktime is available on all archs;
complexity of ktime calculations depending on the arch is less than
(reduces to a simple arithmetic operations on archs with
BITS_PER_LONG == 64 or CONFIG_KTIME_SCALAR) or equal to timeval
functions (other archs); code becomes more readable; macros can be
thrown out.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add two ktime helper functions that i) convert a given msec value to
a ktime structure and ii) that adds a msec value to a ktime structure.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We do neither ship a test_frame.h, nor will this be compatible with
the 2.5 out-of-tree lksctp kernel test suite anyway. So remove this
artefact.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch splits the timers for duplicate address detection and router
solicitations apart. The router solicitations timer goes into inet6_dev
and the dad timer stays in inet6_ifaddr.
The reason behind this patch is to reduce the number of unneeded router
solicitations send out by the host if additional link-local addresses
are created. Currently we send out RS for every link-local address on
an interface.
If the RS timer fires we pick a source address with ipv6_get_lladdr. This
change could hurt people adding additional link-local addresses and
specifying these addresses in the radvd clients section because we
no longer guarantee that we use every ll address as source address in
router solicitations.
Cc: Flavio Leitner <fleitner@redhat.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Stevens <dlstevens@us.ibm.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Reviewed-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, HPAGE_PMD_* constans rely on PMD_SHIFT regardless of
CONFIG_TRANSPARENT_HUGEPAGE. PMD_SHIFT is not defined everywhere (e.g.
arm nommu case).
It means we can't use anything like this in generic code:
if (PageTransHuge(page))
zero_huge_user(page, 0, HPAGE_PMD_SIZE);
else
clear_highpage(page);
For !THP case, PageTransHuge() is 0 and compiler can eliminate
zero_huge_user() call. But it still need to be valid C expression, means
HPAGE_PMD_SIZE has to expand to something compiler can understand.
Previously, HPAGE_PMD_* were defined to BUILD_BUG() for !THP. Let's come
back to it.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
commit 68c3316311 ("v4 GRE: Add TCP segmentation offload for GRE")
added a possible skb leak, because it frees only the head of segment
list, in case a skb_linearize() call fails.
This patch adds a kfree_skb_list() helper to fix the bug.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Pravin B Shelar <pshelar@nicira.com>
Cc: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add macros for single bit definitions of a specific type. These are
similar to the BIT() macro that already exists, but with a few
exceptions:
1. The namespace is such that they can be used in uapi definitions.
2. The type is set with the _AC() macro to allow it to be used in
assembly.
3. The type is explicitly specified to be UL or ULL.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-nbca8p7cg6jyjoit7klh3o91@git.kernel.org
The futex_keys of process shared futexes are generated from the page
offset, the mapping host and the mapping index of the futex user space
address. This should result in an unique identifier for each futex.
Though this is not true when futexes are located in different subpages
of an hugepage. The reason is, that the mapping index for all those
futexes evaluates to the index of the base page of the hugetlbfs
mapping. So a futex at offset 0 of the hugepage mapping and another
one at offset PAGE_SIZE of the same hugepage mapping have identical
futex_keys. This happens because the futex code blindly uses
page->index.
Steps to reproduce the bug:
1. Map a file from hugetlbfs. Initialize pthread_mutex1 at offset 0
and pthread_mutex2 at offset PAGE_SIZE of the hugetlbfs
mapping.
The mutexes must be initialized as PTHREAD_PROCESS_SHARED because
PTHREAD_PROCESS_PRIVATE mutexes are not affected by this issue as
their keys solely depend on the user space address.
2. Lock mutex1 and mutex2
3. Create thread1 and in the thread function lock mutex1, which
results in thread1 blocking on the locked mutex1.
4. Create thread2 and in the thread function lock mutex2, which
results in thread2 blocking on the locked mutex2.
5. Unlock mutex2. Despite the fact that mutex2 got unlocked, thread2
still blocks on mutex2 because the futex_key points to mutex1.
To solve this issue we need to take the normal page index of the page
which contains the futex into account, if the futex is in an hugetlbfs
mapping. In other words, we calculate the normal page mapping index of
the subpage in the hugetlbfs mapping.
Mappings which are not based on hugetlbfs are not affected and still
use page->index.
Thanks to Mel Gorman who provided a patch for adding proper evaluation
functions to the hugetlbfs code to avoid exposing hugetlbfs specific
details to the futex code.
[ tglx: Massaged changelog ]
Signed-off-by: Zhang Yi <zhang.yi20@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Tested-by: Ma Chenggong <ma.chenggong@zte.com.cn>
Reviewed-by: 'Mel Gorman' <mgorman@suse.de>
Acked-by: 'Darren Hart' <dvhart@linux.intel.com>
Cc: 'Peter Zijlstra' <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/000101ce71a6%24a83c5880%24f8b50980%24@com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Although defined in platform data, vref is not used anywhere.
Also remove model, irq, and clear_penirq as they are not used either.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently the debounce time pinconfig option uses an unspecified
"time units" unit. As pinconfig options should use SI units and a
real unit is also necessary for generic dt bindings, change it
to usec. Currently no driver is using the generic pinconfig option
for this, so the unit change is safe to do.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
PULL_PIN_DEFAULT is meant for hardware completely hiding any pull
settings from the driver, so that it's really only possible to turn
the pull on or off, but it not being possible to determine any
pull settings from software.
Also the binding-documentation for the pull arguments did not match
the changes to the expected values.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
From the inception ot the pin config API there has been the
possibility to get a handle at a pin directly and configure
its electrical characteristics. For this reason we had:
int pin_config_get(const char *dev_name, const char *name,
unsigned long *config);
int pin_config_set(const char *dev_name, const char *name,
unsigned long config);
int pin_config_group_get(const char *dev_name,
const char *pin_group,
unsigned long *config);
int pin_config_group_set(const char *dev_name,
const char *pin_group,
unsigned long config);
After the introduction of the pin control states that will
control pins associated with devices, and its subsequent
introduction to the device core, as well as the
introduction of pin control hogs that can set up states on
boot and optionally also at sleep, this direct pin control
API is a thing of the past.
As could be expected, it has zero in-kernel users.
Let's delete this API and make our world simpler.
Reported-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch adds new regulator driver to support max77693 chip's regulators.
max77693 has two linear voltage regulators and one current regulator which
can be controlled through I2C bus. This driver also supports device tree.
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Drivers that want to get the trigger edge/level type flags for a given
interrupt have to call irq_get_irq_data(irq) to get the struct
irq_data and then irqd_get_trigger_type(irq_data) to obtain the IRQ
flags.
This is not only error prone but also unnecessary exposes the struct
irq_data to callers.
It's better to have an irq_get_trigger_type() function to obtain the
edge/level flags for an IRQ.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Link: http://lkml.kernel.org/r/1371228049-27080-2-git-send-email-javier.martinez@collabora.co.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
struct tcp_fastopen_context has a field named tfm, which is a pointer
to a crypto_cipher structure.
It currently has a __rcu annotation, which is not needed at all.
tcp_fastopen_ctx is the pointer fetched by rcu_dereference(), but once
we have a pointer to current tcp_fastopen_context, we do not use/need
rcu_dereference() to access tfm.
This fixes a lot of sparse errors like the following :
net/ipv4/tcp_fastopen.c:21:31: warning: incorrect type in argument 1 (different address spaces)
net/ipv4/tcp_fastopen.c:21:31: expected struct crypto_cipher *tfm
net/ipv4/tcp_fastopen.c:21:31: got struct crypto_cipher [noderef] <asn:4>*tfm
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jerry Chu <hkchu@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch refactors ISCSI_OP_TEXT handling within iscsi-target in
order to handle iscsi_text payloads in a transport specific manner.
This includes splitting current iscsit_handle_text_cmd() into
iscsit_setup_text_cmd() and iscsit_process_text_cmd() calls, and
makes iscsit_handle_text_cmd be only used internally by traditional
iscsi socket calls.
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch refactors ISCSI_OP_NOOP handling within iscsi-target in
order to handle iscsi_nopout payloads in a transport specific manner.
This includes splitting existing iscsit_handle_nop_out() into
iscsit_setup_nop_out() and iscsit_process_nop_out() calls, and
makes iscsit_handle_nop_out() be only used internally by traditional
iscsi socket calls.
Next update iser-target code to use new callers and add FIXME for
the handling iscsi_nopout payloads. Also fix reject response handling
in iscsit_setup_nop_out() to use proper iscsit_add_reject_from_cmd().
v2: Fix uninitialized iscsit_handle_nop_out() payload_length usage (Fengguang)
v3: Remove left-over dead code in iscsit_setup_nop_out() (DanC)
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Drivers are allowed (actually have to) disable unrelated crtcs in
their ->set_config callback (when we steal all the connectors from
that crtc). If they do that they'll clear crtc->fb to NULL.
Which results in a refcount leak, since the drm core is keeping track
of that reference.
To fix this track the old fb of all crtcs and adjust references for
all of them. Of course, since we only hold an additional reference for
the fb for the current crtc we need to increase refcounts before we
drop the old one.
This approach has the benefit that it inches us a bit closer to an
atomic modeset world, where we want to update the config of all crtcs
in one step.
This regression has been introduce in the framebuffer refcount
conversion, specifically in
commit b0d1232589
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Dec 11 01:07:12 2012 +0100
drm: refcounting for crtc framebuffers
Reported-by: Russell King <linux@arm.linux.org.uk>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Similarly to the networking receive path with ptype_all taps, we add
the possibility to register netdevices that are for ARPHRD_NETLINK to
the netlink subsystem, so that those can be used for netlink analyzers
resp. debuggers. We do not offer a direct callback function as out-of-tree
modules could do crap with it. Instead, a netdevice must be registered
properly and only receives a clone, managed by the netlink layer. Symbols
are exported as GPL-only.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This small patch adds the definition of ARPHRD_NETLINK which can for
example be used by netlink monitoring devices as device type. So that
sockaddr_ll can pick it up and based on that choose the correct packet
dissector.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
"ci13xxx" is bad for at least the following reasons:
* people often mistype it
* it doesn't add any informational value to the names it's used in
* it needlessly attracts mail filters
This patch replaces it with "ci_hdrc", "ci_udc" or "ci_hw", depending
on the situation. Modules with ci13xxx prefix are also renamed accordingly
and aliases are added for compatibility. Otherwise, no functional changes.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
on i386:
drivers/built-in.o: In function `ci_hdrc_probe':
core.c:(.text+0x20446b): undefined reference to `of_usb_get_phy_mode'
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cgroup curiously has two subsystem masks, ->subsys_mask and
->actual_subsys_mask. The latter only exists because the new target
subsys_mask is passed into rebind_subsystems() via @root>subsys_mask.
rebind_subsystems() needs to know what the current mask is to decide
how to reach the target mask so ->actual_subsys_mask is used as the
temp location to remember the current state.
Adding a temporary field to a permanent data structure is rather silly
and can be misleading. Update rebind_subsystems() to take @added_mask
and @removed_mask instead and remove @root->actual_subsys_mask.
This patch shouldn't introduce any behavior changes.
v2: Comment and description updated as suggested by Li.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Commit 7064f6b "clk: tegra: provide tegra_periph_reset_assert
alternative" added ifdef'd static inline versions of some functions,
but tested ARCH_TEGRA rather than CONFIG_ARCH_TEGRA, thus disabling
these function in all cases. In some cases, this caused HW modules to
misbehave; for example, the Tegra I2C driver BUG()d during boot on
Seaboard.
Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Paul Walmsley <pwalmsley@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Not all disks fill out the VPD pages correctly. Add a blacklist flag
that allows us ignore the SBC-3 VPD pages for a given device. The
BLIST_SKIP_VPD_PAGES flag triggers our existing skip_vpd_pages
scsi_device parameter to bypass VPD scanning.
Also blacklist the offending Seagate drive model.
Reported-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Add define for: HSDRV, HFDAC, HFPGA and HFDRV enable bits
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
--------------------------------------
This pull request adds DT and runtime PM to
EDMA ARM private API so it can be used on
DT enabled DaVinci and OMAP platforms.
Also adds DMA channel crossbar mapping
support to be used by DT-enabled platforms
which use it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=h9EO
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v3.11/soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc
From Sekhar Nori:
DaVinci SoC updates for v3.11 - part 2
This pull request adds DT and runtime PM to
EDMA ARM private API so it can be used on
DT enabled DaVinci and OMAP platforms.
Also adds DMA channel crossbar mapping
support to be used by DT-enabled platforms
which use it.
* tag 'davinci-for-v3.11/soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
dmaengine: edma: enable build for AM33XX
ARM: edma: Add EDMA crossbar event mux support
ARM: edma: Add DT and runtime PM support to the private EDMA API
dmaengine: edma: Add TI EDMA device tree binding
ARM: edma: Convert to devm_* api
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Introduce a new helper function, snd_ctl_sync_vmaster(), which updates
the slave put callbacks forcibly as well as calling the hook. This
will be used in the upcoming patch in HD-audio codec driver for
toggling the mute in vmaster slaves.
Along with the new function, the old snd_ctl_sync_vmaster_hook() is
replaced as a macro calling with the argument hook_only=true.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Over the years, irq_linear_revmap() gained tests and checks to make sure
callers were using it safely, which while important, also make it less
of a fast path. After the irqdomain refactoring done recently, it is now
possible to make irq_linear_revmap() a fast path again. This patch moves
irq_linear_revmap() to the header file and makes it a static inline so
that interrupt controller drivers using a linear mapping can decode the
virq from a hwirq in just a couple of instructions.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Originally, irq_domain_associate_many() was designed to unwind the
mapped irqs on a failure of any individual association. However, that
proved to be a problem with certain IRQ controllers. Some of them only
support a subset of irqs, and will fail when attempting to map a
reserved IRQ. In those cases we want to map as many IRQs as possible, so
instead it is better for irq_domain_associate_many() to make a
best-effort attempt to map irqs, but not fail if any or all of them
don't succeed. If a caller really cares about how many irqs got
associated, then it should instead go back and check that all of the
irqs is cares about were mapped.
The original design open-coded the individual association code into the
body of irq_domain_associate_many(), but with no longer needing to
unwind associations, the code becomes simpler to split out
irq_domain_associate() to contain the bulk of the logic, and
irq_domain_associate_many() to be a simple loop wrapper.
This patch also adds a new error check to the associate path to make
sure it isn't called for an irq larger than the controller can handle,
and adds locking so that the irq_domain_mutex is held while setting up a
new association.
v3: Fixup missing change to irq_domain_add_tree()
v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an
error code, but reports errors to the printk log directly. In the
majority of cases we don't actually want to fail if there is a
problem, but rather log it and still try to boot the system.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
irqdomain: Fix flubbed irq_domain_associate_many refactoring
commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was
missing the following hunk which causes a boot failure on anything using
irq_domain_add_tree() to allocate an irq domain.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Cc: Thomas Gleixner <tglx@linutronix.de>,
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Add core MFD driver for the on-board PLD found on some Kontron embedded
modules. The PLD device may provide functions like watchdog, GPIO, UART
and I2C bus.
The following modules are supported:
* COMe-bIP#
* COMe-bPC2 (ETXexpress-PC)
* COMe-bSC# (ETXexpress-SC T#)
* COMe-cCT6
* COMe-cDC2 (microETXexpress-DC)
* COMe-cPC2 (microETXexpress-PC)
* COMe-mCT10
* ETX-OH
Originally-From: Michael Brunner <michael.brunner@kontron.com>
Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Adds tracepoints to dev_pm_qos_add_request, dev_pm_qos_update_request,
and dev_pm_qos_remove_request. It's useful for checking device name,
dev_pm_qos_request_type, and value.
Signed-off-by: Sahara <keun-o.park@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Adds tracepoints to pm_qos_add_request, pm_qos_update_request,
pm_qos_remove_request, and pm_qos_update_request_timeout.
It's useful for checking pm_qos_class, value, and timeout_us.
Signed-off-by: Sahara <keun-o.park@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch adds tracepoints to pm_qos_update_target and
pm_qos_update_flags. It's useful for checking pm qos action,
previous value and current value.
Signed-off-by: Sahara <keun-o.park@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The interactions between the ACPI dock driver and the ACPI-based PCI
hotplug (acpiphp) are currently problematic because of ordering
issues during hot-remove operations.
First of all, the current ACPI glue code expects that physical
devices will always be deleted before deleting the companion ACPI
device objects. Otherwise, acpi_unbind_one() will fail with a
warning message printed to the kernel log, for example:
[ 185.026073] usb usb5: Oops, 'acpi_handle' corrupt
[ 185.035150] pci 0000:1b:00.0: Oops, 'acpi_handle' corrupt
[ 185.035515] pci 0000:18:02.0: Oops, 'acpi_handle' corrupt
[ 180.013656] port1: Oops, 'acpi_handle' corrupt
This means, in particular, that struct pci_dev objects have to
be deleted before the struct acpi_device objects they are "glued"
with.
Now, the following happens the during the undocking of an ACPI-based
dock station:
1) hotplug_dock_devices() invokes registered hotplug callbacks to
destroy physical devices associated with the ACPI device objects
depending on the dock station. It calls dd->ops->handler() for
each of those device objects.
2) For PCI devices dd->ops->handler() points to
handle_hotplug_event_func() that queues up a separate work item
to execute _handle_hotplug_event_func() for the given device and
returns immediately. That work item will be executed later.
3) hotplug_dock_devices() calls dock_remove_acpi_device() for each
device depending on the dock station. This runs acpi_bus_trim()
for each of them, which causes the underlying ACPI device object
to be destroyed, but the work items queued up by
handle_hotplug_event_func() haven't been started yet.
4) _handle_hotplug_event_func() queued up in step 2) are executed
and cause the above failure to happen, because the PCI devices
they handle do not have the companion ACPI device objects any
more (those objects have been deleted in step 3).
The possible breakage doesn't end here, though, because
hotplug_dock_devices() may return before at least some of the
_handle_hotplug_event_func() work items spawned by it have a
chance to complete and then undock() will cause _DCK to be
evaluated and that will cause the devices handled by the
_handle_hotplug_event_func() to go away possibly while they are
being accessed.
This means that dd->ops->handler() for PCI devices should not point
to handle_hotplug_event_func(). Instead, it should point to a
function that will do the work of _handle_hotplug_event_func()
synchronously. For this reason, introduce such a function,
hotplug_event_func(), and modity acpiphp_dock_ops to point to
it as the handler.
Unfortunately, however, this is not sufficient, because if the dock
code were not changed further, hotplug_event_func() would now
deadlock with hotplug_dock_devices() that called it, since it would
run unregister_hotplug_dock_device() which in turn would attempt to
acquire the dock station's hp_lock mutex already acquired by
hotplug_dock_devices().
To resolve that deadlock use the observation that
unregister_hotplug_dock_device() won't need to acquire hp_lock
if PCI bridges the devices on the dock station depend on are
prevented from being removed prematurely while the first loop in
hotplug_dock_devices() is in progress.
To make that possible, introduce a mechanism by which the callers of
register_hotplug_dock_device() can provide "init" and "release"
routines that will be executed, respectively, during the addition
and removal of the physical device object associated with the
given ACPI device handle. Make acpiphp use two new functions,
acpiphp_dock_init() and acpiphp_dock_release(), that call
get_bridge() and put_bridge(), respectively, on the acpiphp bridge
holding the given device, for this purpose.
In addition to that, remove the dock station's list of
"hotplug devices" and make the dock code always walk the whole list
of "dependent devices" instead in such a way that the loops in
hotplug_dock_devices() and dock_event() (replacing the loops over
"hotplug devices") will take references to the list entries that
register_hotplug_dock_device() has been called for. That prevents
the "release" routines associated with those entries from being
called while the given entry is being processed and for PCI
devices this means that their bridges won't be removed (by a
concurrent thread) while hotplug_event_func() handling them is
being executed.
This change is based on two earlier patches from Jiang Liu.
References: https://bugzilla.kernel.org/show_bug.cgi?id=59501
Reported-and-tested-by: Alexander E. Patrakov <patrakov@gmail.com>
Tracked-down-by: Jiang Liu <jiang.liu@huawei.com>
Tested-by: Illya Klymov <xanf@xanf.me>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: 3.9+ <stable@vger.kernel.org>
EDMA supports a cross bar which provides ability
to mux additional events into physical channels
present in the channel controller.
This is required when the number of events present
in the system are more than number of available
physical channels.
Changes by Joel:
* Split EDMA xbar support out of original EDMA DT parsing patch
to keep it easier for review.
* Rewrite shift and offset calculation.
Suggested-by: Sekhar Nori <nsekhar@ti.com>
Suggested by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
[nsekhar@ti.com: fix checkpatch errors and a minor coding improvement]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Adds support for parsing the TI EDMA DT data into the required EDMA
private API platform data. Enables runtime PM support to initialize
the EDMA hwmod. Enables build on OMAP.
Changes by Joel:
* Setup default one-to-one mapping for queue_priority and queue_tc
mapping as discussed in [1].
* Split out xbar stuff to separate patch. [1]
* Dropped unused DT helper to convert to array
* Fixed dangling pointer issue with Sekhar's changes
[1] https://patchwork.kernel.org/patch/2226761/
Signed-off-by: Matt Porter <mporter@ti.com>
[nsekhar@ti.com: fix checkpatch errors, build breakages. Introduce
edma_setup_info_from_dt() as part of that effort]
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
John W. Linville says:
====================
I would guess that this is the last big wireless pull request before
the 3.11 merge window...
Regarding the mac80211 bits, Johannes says:
"I have a number of mesh fixes and improvements from Colleen, Jacob,
Ashok and Thomas, powersave fixes in mac80211 from Alex, improved
management-TX from Antonio, and a few various things, including locking
fixes, from others and myself. Overall though, nothing really stands
out."
As for the iwlwifi bits, Johannes says:
"Emmanuel contributed two AP mode fixes, removed an unused field, fixed a
comment and added a warning for something that shouldn't happen in
practice, and I removed the declaration of a function that doesn't even
exist and cleaned up a small include."
"This time I have a number of cleanups, a small fix from Emmanuel and two
performance improvements that combined reduce our driver's CPU
utilisation as much as 75% in high TX-throughput scenarios."
"These two patches fix two issues with using rfkill randomly during
traffic, which would then cause our driver to stop working and not be
able to recover at all."
Regarding the ath6kl bits, Kalle says:
"Here are few simple patches for ath6kl. We have a suspend crash fix for
USB from Shafi, use of mac_pton(), a compiler warning fix and a fix for
module initialisation error path."
Kalle also sends the biggest single item of note, the new ath10k
driver for Qualcomm Atheros 802.11ac CQA98xx devices.
Included is an NFC pull, of which Samuel says:
"These are the pending NFC patches for the 3.11 merge window.
It contains the pending fixes that were on nfc-fixes (nfc-fixes-3.10-2),
along with a few more for the pn544 and pn533 drivers, the LLCP
disconnection path and an LLCP memory leak.
Highlights for this one are:
- An initial secure element API. NFC chipsets can carry an embedded
secure element or get access to the SIM one. In both cases they
control the secure elements and this API provides a way to discover,
enable and disable the available SEs. It also exports that to
userspace in order for SE focused middleware to actually do something
with them (e.g. payments).
- NCI over SPI support. SPI is the most complex NCI specified transport
layer and we now have support for it in the kernel. The next step will
be to implement drivers for NCI chipsets using this transport like
e.g. bcm2079x.
- NFC p2p hardware simulation driver. We now have an nfcsim driver that
is mostly a loopback device between 2 NFC interfaces. It also
implements the rest of the NFC core API like polling and target
detection. This driver, with neard running on top of it, allows us to
completely test the LLCP, SNEP and Handover implementation without
physical hardware.
- A Firmware update netlink API. Most (All ?) HCI chipsets have a
special firmware update mode where applications can push a new
firmware that will be flashed. We now have a netlink API for providing
that mode to e.g. nfctool."
On top of all that, there are a variety of updates to brcmfmac,
iwlegacy, rtlwifi, wil6210, and the TI wl12xx drivers. As usual,
the bcma and ssb busses get a little love as well, as do a handful
of others here and there.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tunnel constants can be used in generic code but in these cases
the inline functions in ip_tunnels.h cause compilation problems
if CONFIG_INET is not set.
CC: Pravin Shelar <pshelar@nicira.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch has been invaluable in my adventures finding
issues in the perf NMI handler. I'm as big a fan of
printk() as anybody is, but using printk() in NMIs is
deadly when they're happening frequently.
Even hacking in trace_printk() ended up eating enough
CPU to throw off some of the measurements I was making.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: acme@ghostprotocols.net
Cc: Dave Hansen <dave@sr71.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch keeps track of how long perf's NMI handler is taking,
and also calculates how many samples perf can take a second. If
the sample length times the expected max number of samples
exceeds a configurable threshold, it drops the sample rate.
This way, we don't have a runaway sampling process eating up the
CPU.
This patch can tend to drop the sample rate down to level where
perf doesn't work very well. *BUT* the alternative is that my
system hangs because it spends all of its time handling NMIs.
I'll take a busted performance tool over an entire system that's
busted and undebuggable any day.
BTW, my suspicion is that there's still an underlying bug here.
Using the HPET instead of the TSC is definitely a contributing
factor, but I suspect there are some other things going on.
But, I can't go dig down on a bug like that with my machine
hanging all the time.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: acme@ghostprotocols.net
Cc: Dave Hansen <dave@sr71.net>
[ Prettified it a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Remove HCI_LINK_KEYS flag since using HCI_MGMT is enough for test that
user space expects the kernel managing link keys.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch removes hci_do_inquiry and hci_cancel_inquiry helpers. We
now use the HCI request framework in device discovery functionality
and these helpers are no longer needed.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch removes the LE scan helpers hci_le_scan and hci_cancel_
le_scan and all code related to it. We now use the HCI request
framework in device discovery functionality and these helpers are
no longer needed.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
mgmt_stop_discovery_failed is now only used in mgmt.c so we can
make it a local function. This patch also moves the mgmt_stop_
discovery_failed definition up in mgmt.c to avoid forward
declaration.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
In order to have a better HCI error handling in interleaved discovery
functionality, we should use the HCI request framework.
This patch updates le_scan_disable_work function so it uses the
HCI request framework instead of the hci_send_cmd helper. A complete
callback is registered (le_scan_disable_work_complete function) so we
are able to trigger the inquiry procedure (if we are running the
interleaved discovery) or to stop the discovery procedure (if we are
running LE-only discovery).
This patch also removes the extra logic in hci_cc_le_set_scan_enable
to trigger the inquiry procedure and the mgmt_interleaved_discovery
function since they become useless.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Some of discovery macros will be used in hci_core so we need to
define them in common place such as hci_core.h. Thus, this patch
moves discovery macros to hci_core.h and also adds the DISCOV_
prefix to them.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
mgmt_start_discovery_failed is now only used in mgmt.c so we can
make it a local function. This patch also moves the mgmt_start_
discovery_failed definition up in mgmt.c to avoid forward
declaration.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
In order to use HCI request framework in start_discovery, we'll need
to call inquiry_cache_flush in mgmt.c. Therefore, this patch adds the
hci_ prefix to inquiry_cache_flush and makes it non-static.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
In future Core Specification versions the ATT CID will be just one of
many possible CIDs that can be used for data transfer. Therefore, it
makes sense to rename the define for the ATT CID to something less
ambigous.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Pull vfs fixes from Al Viro:
"Several fixes for bugs caught while looking through f_pos (ab)users"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
aout32 coredump compat fix
splice: don't pass the address of ->f_pos to methods
mconsole: we'd better initialize pos before passing it to vfs_read()...
We have some tegra device drivers that are written to be platform
independent but still use the tegra specific tegra_periph_reset_assert
function. In order to build and link them without errors,
this provides a static inline version of these functions that
does nothing when Tegra support is disabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: fixed up trivial merge issue]
Include definitions of used types by including drm/drm.h
Sparse output:
/usr/include/drm/tegra_drm.h:21:
found __[us]{8,16,32,64} type without
#include <linux/types.h>
Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Use the v4l2-async API to support asynchronous subdevice probing,
including the CSI2 subdevice. Synchronous probing is still supported too.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add support for asynchronous subdevice probing, using the v4l2-async API.
The legacy synchronous mode is still supported too, which allows to
gradually update drivers and platforms. The selected approach adds a
notifier for each struct soc_camera_device instance, i.e. for each video
device node, even when there are multiple such instances registered with a
single soc-camera host simultaneously.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of centrally enabling and disabling subdevice master clocks in
soc-camera core, let subdevice drivers do that themselves, using the
V4L2 clock API and soc-camera convenience wrappers.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Currently bridge device drivers register devices for all subdevices
synchronously, typically, during their probing. E.g. if an I2C CMOS sensor
is attached to a video bridge device, the bridge driver will create an I2C
device and wait for the respective I2C driver to probe. This makes linking
of devices straight forward, but this approach cannot be used with
intrinsically asynchronous and unordered device registration systems like
the Flattened Device Tree. To support such systems this patch adds an
asynchronous subdevice registration framework to V4L2. To use it respective
(e.g. I2C) subdevice drivers must register themselves with the framework.
A bridge driver on the other hand must register notification callbacks,
that will be called upon various related events.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
It is often useful to have simple means to get from a subdevice to the
underlying physical device. This patch adds such a pointer to struct
v4l2_subdev and sets it accordingly in the I2C and SPI cases.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Typical video devices like camera sensors require an external clock source.
Many such devices cannot even access their hardware registers without a
running clock. These clock sources should be controlled by their consumers.
This should be performed, using the generic clock framework. Unfortunately
so far only very few systems have been ported to that framework. This patch
adds a set of temporary helpers, mimicking the generic clock API, to V4L2.
Platforms, adopting the clock API, should switch to using it. Eventually
this temporary API should be removed.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Currently soc-camera uses a single camera host callback to activate the
interface master clock and to configure the interface for a specific
client. However, during probing we might not have the information about
a client, we just need to activate the clock. Add new camera host driver
callbacks to only start and stop the clock without and client-specific
configuration.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
All soc-camera host drivers include a pointer to an soc-camera device in
their host private struct to check, that only one client is connected.
Move this common code to soc_camera.c.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
- Fix for a regression causing a failure to turn on some devices on
some systems during initialization introduced by a recent revert of
an ACPI PM change that broke something else.
- ACPI power resources initialization fix preventing a NULL pointer
from being dereferenced in the acpi_add_power_resource() error code
path.
- ACPI dock station driver fix that adds missing locking to
write_undock().
- ACPI resources allocation fix changing the scope of an old
workaround so that it doesn't affect systems that aren't actually
buggy.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=V0L1
-----END PGP SIGNATURE-----
Merge tag 'acpi-3.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
- Fix for a regression causing a failure to turn on some devices on
some systems during initialization introduced by a recent revert of
an ACPI PM change that broke something else. Fortunately, we know
exactly what devices are affected, so we can add a fix just for them
leaving everyone else alone.
- ACPI power resources initialization fix preventing a NULL pointer
from being dereferenced in the acpi_add_power_resource() error code
path.
- ACPI dock station driver fix that adds missing locking to
write_undock().
- ACPI resources allocation fix changing the scope of an old workaround
so that it doesn't affect systems that aren't actually buggy. This
was reported a couple of days ago to fix DMA problems on some new
platforms so we need it in -stable. From Mika Westerberg.
* tag 'acpi-3.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / LPSS: Power up LPSS devices during enumeration
ACPI / PM: Fix error code path for power resources initialization
ACPI / dock: Take ACPI scan lock in write_undock()
ACPI / resources: call acpi_get_override_irq() only for legacy IRQ resources
Not a big release subsystem wise, the main changes have been some nice
improvements on the driver side:
- Lots of cleanups and fixes for Blackfin, SGTL5000 and UX500.
- Generalisation of the Bluetooth and HDMI stub drivers.
- New CODEC drivers for SSM2518 and RT5640.
- New machine driver for Tegra CPUs with RT5640.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=gWf9
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v3.11
Not a big release subsystem wise, the main changes have been some nice
improvements on the driver side:
- Lots of cleanups and fixes for Blackfin, SGTL5000 and UX500.
- Generalisation of the Bluetooth and HDMI stub drivers.
- New CODEC drivers for SSM2518 and RT5640.
- New machine driver for Tegra CPUs with RT5640.
We currently send all mappings to the iommu in PAGE_SIZE chunks,
which prevents the iommu from enabling support for larger page sizes.
We still need to pin pages, which means we step through them in
PAGE_SIZE chunks, but we can batch up contiguous physical memory
chunks to allow the iommu the opportunity to use larger pages. The
approach here is a bit different that the one currently used for
legacy KVM device assignment. Rather than looking at the vma page
size and using that as the maximum size to pass to the iommu, we
instead simply look at whether the next page is physically
contiguous. This means we might ask the iommu to map a 4MB region,
while legacy KVM might limit itself to a maximum of 2MB.
Splitting our mapping path also allows us to be smarter about locked
memory because we can more easily unwind if the user attempts to
exceed the limit. Therefore, rather than assuming that a mapping
will result in locked memory, we test each page as it is pinned to
determine whether it locks RAM vs an mmap'd MMIO region. This should
result in better locking granularity and less locked page fudge
factors in userspace.
The unmap path uses the same algorithm as legacy KVM. We don't want
to track the pfn for each mapping ourselves, but we need the pfn in
order to unpin pages. We therefore ask the iommu for the iova to
physical address translation, ask it to unpin a page, and see how many
pages were actually unpinned. iommus supporting large pages will
often return something bigger than a page here, which we know will be
physically contiguous and we can unpin a batch of pfns. iommus not
supporting large mappings won't see an improvement in batching here as
they only unmap a page at a time.
With this change, we also make a clarification to the API for mapping
and unmapping DMA. We can only guarantee unmaps at the same
granularity as used for the original mapping. In other words,
unmapping a subregion of a previous mapping is not guaranteed and may
result in a larger or smaller unmapping than requested. The size
field in the unmapping structure is updated to reflect this.
Previously this was unmodified on mapping, always returning the the
requested unmap size. This is now updated to return the actual unmap
size on success, allowing userspace to appropriately track mappings.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The last set of drivers still using the parent field of video_device instead
of the v4l2_dev field have been converted, so v4l2_dev is now always set.
A proper pointer to v4l2_dev is necessary these days otherwise the advanced
debugging ioctls will not work when addressing sub-devices. It also ensures
that the core can always go from a video_device struct to the top-level
v4l2_device struct.
There is still one single use case for the parent pointer: if there are
multiple busses, each being the parent of one or more video nodes, and if
they all share the same v4l2_device struct. In that case one still needs a
parent pointer since the v4l2_device struct can only refer to a single
parent device. The cx88 driver is one such case. Unfortunately, the cx88
failed to set the parent pointer since 3.6. The next patch will correct this.
In order to support this use-case the parent pointer is only renamed to
dev_parent, not removed altogether. It has been renamed to ensure that the
compiler will catch any (possibly out-of-tree) drivers that were missed during
the conversion.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The parent field will eventually disappear to be replaced by v4l2_dev.
soc_camera does provide a v4l2_device struct but did not point to it in
struct video_device. This is now fixed.
Now the video nodes can be found under the correct platform bus, and
the advanced debug ioctls work correctly as well (the core implementation
of those ioctls requires that v4l2_dev is set correctly).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This has been replaced by the new and much better VIDIOC_DBG_G_CHIP_INFO.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This function is no longer needed since it is now the responsibility of the
v4l2 core to check if the DBG_G/S_REGISTER and DBG_G_CHIP_INFO ioctls are
called for the bridge driver or not.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
- add support for exynos5420 SoC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=l2mp
-----END PGP SIGNATURE-----
Merge tag 'soc-exynos5420-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/late
From Kukjin Kim:
based on tags/common-clk-audio
- add support for exynos5420 SoC
* tag 'soc-exynos5420-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: extend soft-reset support for EXYNOS5420
ARM: EXYNOS: add secondary CPU boot base location for EXYNOS5420
clocksource: exynos_mct: use (request/free)_irq calls for local timer registration
ARM: dts: Add initial device tree support for EXYNOS5420
clk: exynos5420: register clocks using common clock framework
ARM: EXYNOS: use four additional chipid bits to identify EXYNOS family
serial: samsung: select EXYNOS specific driver data if ARCH_EXYNOS is defined
ARM: EXYNOS: Add support for EXYNOS5420 SoC
ARM: dts: list the CPU nodes for EXYNOS5250
ARM: dts: fork out common EXYNOS5 nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
__initdata annotations for the r8a7790 SoC by Morimoto-san.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=i7Kv
-----END PGP SIGNATURE-----
Merge tag 'renesas-cleanup-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/late
From Simon Horman:
Renesas ARM based SoC cleanups for v3.11
__initdata annotations for the r8a7790 SoC by Morimoto-san.
* tag 'renesas-cleanup-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (158 commits)
ARM: shmobile: r8a7790: add __initdata on resource and device data
Based on 'renesas-pinmux-for-v3.11' and 'renesas-soc-for-v3.11
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABCAAGBQJRw/9tAAoJEPOmecmc0R2B3NMH/A609NR5Yag2vftml8Gl+Iya
2k/dligAPxx/WEogXwxrCcEwFvxA3iNvD9M7MuXZ25ffFL6SgYLnxNYCU53rXRmE
UBQP3OTW/5FyR3N/JGCLW4G8f6LoNWGtOaZqpMC97J4ucnWV/DtbEpoO7qlET/p0
zUsqIpFc9RGroRAmDuRRKpOuArBX5N9utH4fvpZ1XiXztIaESdCiGDFx4AN5g7Iq
uujcKK1NOoj4X/LXj0j4A1ECAhpJ5W8exacdwZZnKVVwA1CpEFxQLu9ekvCYYMNC
6LWhp2/ptgRj7Tv5uVqbHJn4jKd/OM+X0Rn6HcMY1Dwhf37Oa2wPEuQ2qMzcE6A=
=4BBI
-----END PGP SIGNATURE-----
Merge tag 'v3.11-rockchip-basics' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc
From Heiko Stuebner:
Adds basic support for Rockchip Cortex-A9 SoCs.
* tag 'v3.11-rockchip-basics' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm: add basic support for Rockchip RK3066a boards
arm: add debug uarts for rockchip rk29xx and rk3xxx series
arm: Add basic clocks for Rockchip rk3066a SoCs
clocksource: dw_apb_timer_of: use clocksource_of_init
clocksource: dw_apb_timer_of: select DW_APB_TIMER
clocksource: dw_apb_timer_of: add clock-handling
clocksource: dw_apb_timer_of: enable the use the clocksource as sched clock
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Timer Pulse Unit (TPU) is a 4-channels 16-bit timer used to generate
waveforms. This driver exposes PWM functions through the PWM API for
other drivers to use.
The code is loosely based on the leds-renesas-tpu driver by Magnus Damm
and the TPU PWM driver shipped in the Armadillo EVA 800 kernel sources.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Add a simple sysfs interface to the generic PWM framework.
/sys/class/pwm/
`-- pwmchipN/ for each PWM chip
|-- export (w/o) ask the kernel to export a PWM channel
|-- npwm (r/o) number of PWM channels in this PWM chip
|-- pwmX/ for each exported PWM channel
| |-- duty_cycle (r/w) duty cycle (in nanoseconds)
| |-- enable (r/w) enable/disable PWM
| |-- period (r/w) period (in nanoseconds)
| `-- polarity (r/w) polarity of PWM (normal/inversed)
`-- unexport (w/o) return a PWM channel to the kernel
Based on work by Lars Poeschel.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Lars Poeschel <poeschel@lemonage.de>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Allow user space applications to join multicast groups using MGIDs
directly. MGIDs may be passed using AF_IB addresses. Since the
current multicast join command only supports addresses as large as
sockaddr_in6, define a new structure for joining addresses specified
using sockaddr_ib.
Since AF_IB allows the user to specify the qkey when resolving a
remote UD QP address, when joining the multicast group use the qkey
value, if one has been assigned.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Allow user space applications to call resolve_addr using AF_IB. To
support sockaddr_ib, we need to define a new structure capable of
handling the larger address size.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Support user space binding to addresses using AF_IB. Since
sockaddr_ib is larger than sockaddr_in6, we need to define a larger
structure when binding using AF_IB. This time we use sockaddr_storage
to cover future cases.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Several commands into the RDMA CM from user space are restricted to
supporting addresses which fit into a sockaddr_in6 structure: bind
address, resolve address, and join multicast.
With the addition of AF_IB, we need to support addresses which are
larger than sockaddr_in6. This will be done by adding new commands
that exchange address information using sockaddr_storage. However, to
support existing applications, we maintain the current commands and
structures, but rename them to indicate that they only support IPv4
and v6 addresses.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Part of address resolution is mapping IP addresses to IB GIDs. With
the changes to support querying larger addresses and more path records,
also provide a way to query IB GIDs after resolution completes.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Allow the rdma_ucm to query the IB service ID formed or allocated by
the rdma_cm by exporting the cma_get_service_id() functionality.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The current query_route call can return up to two path records. The
assumption being that one is the primary path, with optional support
for an alternate path. In both cases, the paths are assumed to be
reversible and are used to send CM MADs.
With the ability to manually set IB path data, the rdma cm can
eventually be capable of using up to 6 paths per connection:
forward primary, reverse primary,
forward alternate, reverse alternate,
reversible primary path for CM MADs
reversible alternate path for CM MADs.
(It is unclear at this time if IB routing will complicate this) In
order to handle more flexible routing topologies, add a new command to
report any number of paths.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Allow converting from struct ib_sa_path_rec to the IB defined SA path
record wire format. This will be used to report path data from the
rdma cm into user space.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The sockaddr structure for AF_IB is larger than sockaddr_in6. The
rdma cm user space ABI uses the latter to exchange address information
between user space and the kernel.
To support querying for larger addresses, define a new query command
that exchanges data using sockaddr_storage, rather than sockaddr_in6.
Unlike the existing query_route command, the new command only returns
address information. Route (i.e. path record) data is separated.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Allow the user to specify the qkey when using AF_IB. The qkey is
added to struct rdma_ucm_conn_param in place of a reserved field, but
for backwards compatability, is only accessed if the associated
rdma_cm_id is using AF_IB.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
[Purpose of this patch]
As Vaibhav explained in the thread below, tracepoints for irq vectors
are useful.
http://www.spinics.net/lists/mm-commits/msg85707.html
<snip>
The current interrupt traces from irq_handler_entry and irq_handler_exit
provide when an interrupt is handled. They provide good data about when
the system has switched to kernel space and how it affects the currently
running processes.
There are some IRQ vectors which trigger the system into kernel space,
which are not handled in generic IRQ handlers. Tracing such events gives
us the information about IRQ interaction with other system events.
The trace also tells where the system is spending its time. We want to
know which cores are handling interrupts and how they are affecting other
processes in the system. Also, the trace provides information about when
the cores are idle and which interrupts are changing that state.
<snip>
On the other hand, my usecase is tracing just local timer event and
getting a value of instruction pointer.
I suggested to add an argument local timer event to get instruction pointer before.
But there is another way to get it with external module like systemtap.
So, I don't need to add any argument to irq vector tracepoints now.
[Patch Description]
Vaibhav's patch shared a trace point ,irq_vector_entry/irq_vector_exit, in all events.
But there is an above use case to trace specific irq_vector rather than tracing all events.
In this case, we are concerned about overhead due to unwanted events.
So, add following tracepoints instead of introducing irq_vector_entry/exit.
so that we can enable them independently.
- local_timer_vector
- reschedule_vector
- call_function_vector
- call_function_single_vector
- irq_work_entry_vector
- error_apic_vector
- thermal_apic_vector
- threshold_apic_vector
- spurious_apic_vector
- x86_platform_ipi_vector
Also, introduce a logic switching IDT at enabling/disabling time so that a time penalty
makes a zero when tracepoints are disabled. Detailed explanations are as follows.
- Create trace irq handlers with entering_irq()/exiting_irq().
- Create a new IDT, trace_idt_table, at boot time by adding a logic to
_set_gate(). It is just a copy of original idt table.
- Register the new handlers for tracpoints to the new IDT by introducing
macros to alloc_intr_gate() called at registering time of irq_vector handlers.
- Add checking, whether irq vector tracing is on/off, into load_current_idt().
This has to be done below debug checking for these reasons.
- Switching to debug IDT may be kicked while tracing is enabled.
- On the other hands, switching to trace IDT is kicked only when debugging
is disabled.
In addition, the new IDT is created only when CONFIG_TRACING is enabled to avoid being
used for other purposes.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C323ED.5050708@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Each TRACE_EVENT() adds several helper functions. If two or more trace events
share the same structure and print format, they can also share most of these
helper functions and save a lot of space from duplicate code. This is why the
DECLARE_EVENT_CLASS() and DEFINE_EVENT() were created.
Some events require a trigger to be called at registering and unregistering of
the event and to do so they use TRACE_EVENT_FN().
If multiple events require a trigger, they currently have no choice but to use
TRACE_EVENT_FN() as there's no DEFINE_EVENT_FN() available. This unfortunately
causes a lot of wasted duplicate code created.
By adding a DEFINE_EVENT_FN(), these events can still use a
DECLARE_EVENT_CLASS() and then define their own triggers.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/51C3236C.8030508@hds.com
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This patch rewrite driver code to be ready to add support for
MC13892 LEDs and probe from devicetree.
(cooloney@gmail.com: fix one coding style issue when apply this patch)
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Tested-by: Philippe Retornaz <philippe.retornaz@epfl.ch>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
There were a few noticeable formatting issues in core cpufreq code.
This cleans them up to make code look better. The changes include:
- Whitespace cleanup.
- Rearrangements of code.
- Multiline comments fixes.
- Formatting changes to fit 80 columns.
Copyright information in cpufreq.c is also updated to include my name
for 2013.
[rjw: Changelog]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cpufreq governors' stop and start operations should be carried out
in sequence. Otherwise, there will be unexpected behavior, like in
the example below.
Suppose there are 4 CPUs and policy->cpu=CPU0, CPU1/2/3 are linked
to CPU0. The normal sequence is:
1) Current governor is userspace. An application tries to set the
governor to ondemand. It will call __cpufreq_set_policy() in
which it will stop the userspace governor and then start the
ondemand governor.
2) Current governor is userspace. The online of CPU3 runs on CPU0.
It will call cpufreq_add_policy_cpu() in which it will first
stop the userspace governor, and then start it again.
If the sequence of the above two cases interleaves, it becomes:
1) Application stops userspace governor
2) Hotplug stops userspace governor
which is a problem, because the governor shouldn't be stopped twice
in a row. What happens next is:
3) Application starts ondemand governor
4) Hotplug starts a governor
In step 4, the hotplug is supposed to start the userspace governor,
but now the governor has been changed by the application to ondemand,
so the ondemand governor is started once again, which is incorrect.
The solution is to prevent policy governors from being stopped
multiple times in a row. A governor should only be stopped once for
one policy. After it has been stopped, no more governor stop
operations should be executed.
Also add a mutex to serialize governor operations.
[rjw: Changelog. And you owe me a beverage of my choice.]
Signed-off-by: Xiaoguang Chen <chenxg@marvell.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit a938da06 introduced a useful little log message to tell
users/debuggers which wakeup source aborted a suspend. However,
this message is only printed if the abort happens during the
in-kernel suspend path (after writing /sys/power/state).
The full specification of the /sys/power/wakeup_count facility
allows user-space power managers to double-check if wakeups have
already happened before it actually tries to suspend (e.g. while it
was running user-space pre-suspend hooks), by writing the last known
wakeup_count value to /sys/power/wakeup_count. This patch changes
the sysfs handler for that node to also print said log message if
that write fails, so that we can figure out the offending wakeup
source for both kinds of suspend aborts.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now with iscsi-target using modern se_cmd->cmd_kref accounting in
v3.10 code, it's safe to go ahead and drop the legacy release
codepath + se_cmd->check_release bit in transport_release_cmd()
Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@kernel.org>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Moussa Ba <moussaba@micron.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch removes legacy se_cmd->t_fe_count usage in order to avoid
se_cmd->t_state_lock access within transport_put_cmd() during normal
fast path se_cmd descriptor release.
Also drop the left-over parameter usage within core_tmr_handle_tas_abort()
Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@kernel.org>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Moussa Ba <moussaba@micron.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
- use #include for all Samsung DT
- add clk for exynos audio subsystem (audss) and i2s
- support audss and i2s for exynos5250
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=0n6B
-----END PGP SIGNATURE-----
Merge tag 'common-clk-audio' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers
From Kukjin Kim:
based on exynos-dt-2 and s3c24xx-dt-2
- use #include for all Samsung DT
- add clk for exynos audio subsystem (audss) and i2s
- support audss and i2s for exynos5250
* tag 'common-clk-audio' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2
ARM: dts: Update Samsung I2S documentation
ARM: dts: add clock provider information for i2s controllers in Exynos5250
ARM: dts: add Exynos audio subsystem clock controller node
clk: samsung: register audio subsystem clocks using common clock framework
ARM: dts: use #include for all device trees for Samsung
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The AF_IB uses a 64-bit service id (SID), which the user can control
through the use of a mask. The rdma_cm will assign values to the
unmasked portions of the SID based on the selected port space and port
number.
Because the IB spec divides the SID range into several regions, a
SID/mask combination may fall into one of the existing port space
ranges as defined by the RDMA CM IP Annex. Map the AF_IB SID to the
correct RDMA port space.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Add support for AF_IB to ip_addr_size, and rename the function to
account for the change. Give the compiler more control over whether
the call should be inline or not by moving the definition into the .c
file, removing the static inline, and exporting it.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Define AF_IB and sockaddr_ib to allow the rdma_cm to use native IB
addressing.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The OMAP Mailbox driver framework is moved out of arch/arm folder
into drivers/mailbox folder, to re-enable building it and also serve
as a baseline for adapting to the new mailbox driver framework. The
changes mainly contain:
- a minor bug fix and cleanup of mach-specific mailbox code
- remove any header dependencies from plat-omap for multi-platform
support
- represent mailbox device data through platform data/hwmod attrs
- move the omap mailbox code out of plat-omap/mach-omapX to
drivers/mailbox folder
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=j0vK
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.11/mailbox-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers
From Tony Lindgren:
Move OMAP Mailbox framework to drivers via Suman Anna <s-anna@ti.com>
The OMAP Mailbox driver framework is moved out of arch/arm folder
into drivers/mailbox folder, to re-enable building it and also serve
as a baseline for adapting to the new mailbox driver framework. The
changes mainly contain:
- a minor bug fix and cleanup of mach-specific mailbox code
- remove any header dependencies from plat-omap for multi-platform
support
- represent mailbox device data through platform data/hwmod attrs
- move the omap mailbox code out of plat-omap/mach-omapX to
drivers/mailbox folder
* tag 'omap-for-v3.11/mailbox-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
mailbox/omap: move the OMAP mailbox framework to drivers
ARM: OMAP2+: add user and fifo info to mailbox platform data
ARM: OMAP2+: mbox: remove dependencies with soc.h
omap: mailbox: correct the argument type for irq ops
omap: mailbox: call request_irq after mbox queues are allocated
omap: mailbox: check iomem resource before dereferencing it
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
xt_socket module can be a nice replacement to conntrack module
in some cases (SYN filtering for example)
But it lacks the ability to match the 3rd packet of TCP
handshake (ACK coming from the client).
Add a XT_SOCKET_NOWILDCARD flag to disable the wildcard mechanism.
The wildcard is the legacy socket match behavior, that ignores
LISTEN sockets bound to INADDR_ANY (or ipv6 equivalent)
iptables -I INPUT -p tcp --syn -j SYN_CHAIN
iptables -I INPUT -m socket --nowildcard -j ACCEPT
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull scheduler fixes from Ingo Molnar:
"Two smaller fixes - plus a context tracking tracing fix that is a bit
bigger"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/context-tracking: Add preempt_schedule_context() for tracing
sched: Fix clear NOHZ_BALANCE_KICK
sched/x86: Construct all sibling maps if smt
Pull perf fixes from Ingo Molnar:
"Four fixes. The mmap ones are unfortunately larger than desired -
fuzzing uncovered bugs that needed perf context life time management
changes to fix properly"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix broken PEBS-LL support on SNB-EP/IVB-EP
perf: Fix mmap() accounting hole
perf: Fix perf mmap bugs
kprobes: Fix to free gone and unused optprobes
Pull timer fixes from Thomas Gleixner:
- Fix inconstinant clock usage in virtual time accounting
- Fix a build error in KVM caused by the NOHZ work
- Remove a pointless timekeeping duty assignment which breaks NOHZ
- Use a proper notifier return value to avoid random behaviour
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick: Remove useless timekeeping duty attribution to broadcast source
nohz: Fix notifier return val that enforce timekeeping
kvm: Move guest entry/exit APIs to context_tracking
vtime: Use consistent clocks among nohz accounting
OMAP: PM: remove requirement for voltage domain data; remove dummy data
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=KjMH
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.11/pm-voltdomain-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup
From Tony Lindgren:
PM voltage domain clean-up via Kevin Hilman <khilman@linaro.org>:
OMAP: PM: remove requirement for voltage domain data; remove dummy data
* tag 'omap-for-v3.11/pm-voltdomain-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: AM33xx: Remove the unused voltagedomain data
ARM: OMAP2+: Powerdomain: Remove the need to always have a voltdm associated to a pwrdm
Includes an update to Linux 3.10-rc6.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We have two very conflicting state variable names in the
watchdog:
* watchdog_enabled: This one reflects the user interface. It's
set to 1 by default and can be overriden with boot options
or sysctl/procfs interface.
* watchdog_disabled: This is the internal toggle state that
tells if watchdog threads, timers and NMI events are currently
running or not. This state mostly depends on the user settings.
It's a convenient state latch.
Now we really need to find clearer names because those
are just too confusing to encourage deep review.
watchdog_enabled now becomes watchdog_user_enabled to reflect
its purpose as an interface.
watchdog_disabled becomes watchdog_running to suggest its
role as a pure internal state.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Anish Singh <anish198519851985@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Don Zickus <dzickus@redhat.com>
This pull request moves DaVinci EDMA library to
arch/arm/common so it can be used by OMAP based AM335x.
This is a temporary step until all drivers are converted
to use the dmaengine driver in drivers/dma/edma.c.
Several drivers like SPI, MMC/SD have already been converted.
Some like audio are pending.
The other two patches in the pull request are cleanup in nature.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=BH9M
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v3.11/soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc
From Sekhar Nori:
DaVinci SoC changes for v3.11
This pull request moves DaVinci EDMA library to
arch/arm/common so it can be used by OMAP based AM335x.
This is a temporary step until all drivers are converted
to use the dmaengine driver in drivers/dma/edma.c.
Several drivers like SPI, MMC/SD have already been converted.
Some like audio are pending.
The other two patches in the pull request are cleanup in nature.
* tag 'davinci-for-v3.11/soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: edma: remove unused transfer controller handlers
ARM: davinci: move private EDMA API to arm/common
ARM: davinci: remove __init atrribute from function declaration
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The SMPS10 regulator is not presesnt in all the variants
of the PALMAS PMIC family. Hence adding a feature to distingush
between them.
Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The TWL6025 was never released beyond sample form and was replaced by
the PhoenixLite range of chips - TWL6032. Change the references to
reference the TWL6032 class and name the registers to twl6032 in line with
an actual released chip name to avoid confusion.
Currently there are no users of TWL6025 in the code.
Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: Oleksandr Kozaruk <oleksandr.kozaruk@ti.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviwed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Include the missing header file to fix the following build error:
drivers/mfd/davinci_voicecodec.c: In function ‘davinci_vc_probe’:
drivers/mfd/davinci_voicecodec.c:86:3: error: implicit declaration of function
‘io_v2p’ [-Werror=implicit-function-declaration]
(dma_addr_t)(io_v2p(davinci_vc->base) + DAVINCI_VC_WFIFO);
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Linus Torvalds