Which is the case in S/390, where symbols were not being resolved
because machine__get_kernel_start was only setting machine->kernel_start
when the just successfully loaded kernel symtab had its map->start set
to !0, when it was left at (1ULL << 63) assuming a partitioning of the
address space for user/kernel, which is not the case in S/390 nor in
Sparc.
So just check if map__load() was successfull and set
machine->kernel_start to zero, fixing kernel symbol resolution on S/390.
Test performed by Thomas:
----
I like this patch. I have done a new build and removed all my debug output to start
from scratch. Without your patch I get this:
# Samples: 4 of event 'cpu-clock'
# Event count (approx.): 1000000
#
# Children Self Command Shared Object Symbol
# ........ ........ ....... ................ ........................
75.00% 0.00% true [unknown] [k] 0x00000000004bedda
|
---0x4bedda
|
|--50.00%--0x42693a
| |
| --25.00%--0x2a72e0
| 0x2af0ca
| 0x3d1003fe4c0
|
--25.00%--0x4272bc
0x26fa84
and with your patch (I just rebuilt the perf tool, nothing else and used the same
perf.data file as input):
# Samples: 4 of event 'cpu-clock'
# Event count (approx.): 1000000
#
# Children Self Command Shared Object Symbol
# ........ ........ ....... .......................... ..................................
75.00% 0.00% true [kernel.vmlinux] [k] pgm_check_handler
|
---pgm_check_handler
do_dat_exception
handle_mm_fault
__handle_mm_fault
filemap_map_pages
|
|--25.00%--rcu_read_lock_held
| rcu_lockdep_current_cpu_online
| 0x3d1003ff4c0
|
--25.00%--lock_release
Looks good to me....
----
Reported-and-Tested-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com>
Link: http://lkml.kernel.org/n/tip-dk0n1uzmbe0tbthrpfqlx6bz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When no event is specified perf will use the "cycles" hardware event
with the highest precision available in the processor, and excluding
kernel events for non-root users, so make that clear in the event name
by setting the "u" event modifier, i.e. "cycles:upp".
E.g.:
The default for root:
# perf record usleep 1
# perf evlist -v
cycles:ppp: ..., precise_ip: 3, exclude_kernel: 0, ...
#
And for !root:
$ perf record usleep 1
$ perf evlist -v
cycles:uppp: ... , precise_ip: 3, exclude_kernel: 1, ...
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lf29zcdl422i9knrgde0uwy3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow probing the max attr.precise_ip setting for non-root users
we unconditionally set attr.exclude_kernel, which makes the detection
work but should be done only for !root, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 97365e8136 ("perf evsel: Set attr.exclude_kernel when probing max attr.precise_ip")
Link: http://lkml.kernel.org/n/tip-bl6bbxzxloonzvm4nvt7oqgj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
- Fix max attr.precise_ip probing to make perf use the best cycles:p
available in the processor for non root users (Arnaldo Carvalho de Melo)
- Fix processing of MMAP events for 32-bit binaries on 64-bit systems
when unwind support is not fully integrated, fixing DSO and symbol
resolution (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJZW+uQAAoJENZQFvNTUqpARHYP/jzthQY9jH6BtLwntItNc8EY
7zweMpPbdRxXqILfkeEpGiGsH13j8+ZdUlg7Q07yuS2hSJJLYn3WPLb5kfVjDmKP
IeSkJSsGi448RCWr9yQiOIeVbU07vCb3fdcDK6E485n5gU6jjlfvVF9odt1Yg+PY
jNs6XSZDbi5GGMA2CpqHYFjRCQbst7ucF6MLlEF3CK6qY9TtiM1UrWwEoJgiKoab
rnwP9pe2om1KKbBaKE8jSS42yw1KJkvrE6To3cD0HwrnWBufWDZmwrF4Ba5UsClK
2q3uMJMOMzFOZaWAw1NkW5JfSb0iBxOMnFZXgng+zKsubHlkAkY7j+GhgV6ndSXX
viuBR6fFhC37xwHSzgw2z0LIwj8VMmsppZWrgB+El9PUiRJ3qIkooXVPaSV+Eet4
4XfIg4m1L1hlzp5OskV4H6Rh5cqp2g0mmr0iDMSJZVfMC4sCNBSQOT7l7Sks0EWV
4MeLdFcwIXFYjecu/MZ3H+EI2OIi4/KmuPgwyQmVW09tI00qXIQGFHnq9Q4InneU
jAwBxn2qNerXM2DS0Zw55rUWakjYQH2wq6MXFPTmyZXlibiFpbBhQjE9SyafoURN
bC2ago2QXny12WZEwPp3PAYJb6VWhL3W/z00vyawdso1iQJU2QLU4N54+qPq/iXn
4ng+dI3ZeaZQXAT8X6KS
=VehJ
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-4.12-20170704' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Fix max attr.precise_ip probing to make perf use the best cycles:p
available in the processor for non root users (Arnaldo Carvalho de Melo)
- Fix processing of MMAP events for 32-bit binaries on 64-bit systems
when unwind support is not fully integrated, fixing DSO and symbol
resolution (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We currently fail the MMAP event processing if we don't have the MMAP
event's specific arch unwind support compiled in.
That's wrong and can lead to unresolved mmaps in report output for 32bit
binaries on 64bit server, like in this example on x86_64 server:
$ cat ex.c
int main(int argc, char **argv)
{
while (1) {}
}
$ gcc -o ex -m32 ex.c
$ perf record ./ex
^C[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.371 MB perf.data (9322 samples) ]
Before:
$ perf report --stdio
SNIP
# Overhead Command Shared Object Symbol
# ........ ....... ................ ......................
#
100.00% ex [unknown] [.] 0x00000000080483de
0.00% ex [unknown] [.] 0x00000000f76dba4f
0.00% ex [unknown] [.] 0x00000000f76e4c11
0.00% ex [unknown] [.] 0x00000000f76daa30
After:
$ perf report --stdio
SNIP
# Overhead Command Shared Object Symbol
# ........ ....... ............. ...............
#
100.00% ex ex [.] main
0.00% ex ld-2.24.so [.] _dl_start
0.00% ex ld-2.24.so [.] do_lookup_x
0.00% ex ld-2.24.so [.] _start
The fix is not to fail, just warn if there's not unwind support compiled
in.
Reported-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170704131131.27508-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We should set attr.exclude_kernel when probing for attr.precise_ip
level, otherwise !CAP_SYS_ADMIN users will not default to skidless
samples in capable hardware.
The increase in the paranoid level in commit 0161028b7c ("perf/core:
Change the default paranoia level to 2") broke this, fix it by excluding
kernel samples when probing.
Before:
$ perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.018 MB perf.data (6 samples) ]
$ perf evlist -v
cycles:u: sample_freq: 4000, sample_type: IP|TID|TIME|PERIOD, exclude_kernel: 1
After:
$ perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.018 MB perf.data (8 samples) ]
$ perf evlist -v
cycles:ppp: sample_freq: 4000, sample_type: IP|TID|TIME|PERIOD, exclude_kernel: 1, precise_ip: 3
^^^^^^^^^^^^^
^^^^^^^^^^^^^
^^^^^^^^^^^^^
$
To further clarify: we always set .exclude_kernel when non !CAP_SYS_ADMIN
users profile, its just on the attr.precise_ip probing that we weren't doing
so, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 7f8d1ade1b ("perf tools: By default use the most precise "cycles" hw counter available")
Link: http://lkml.kernel.org/n/tip-t2qttwhbnua62o5gt75cueml@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf updates from Ingo Molnar:
"Most of the changes are for tooling, the main changes in this cycle were:
- Improve Intel-PT hardware tracing support, both on the kernel and
on the tooling side: PTWRITE instruction support, power events for
C-state tracing, etc. (Adrian Hunter)
- Add support to measure SMI cost to the x86 architecture, with
tooling support in 'perf stat' (Kan Liang)
- Support function filtering in 'perf ftrace', plus related
improvements (Namhyung Kim)
- Allow adding and removing fields to the default 'perf script'
columns, using + or - as field prefixes to do so (Andi Kleen)
- Allow resolving the DSO name with 'perf script -F brstack{sym,off},dso'
(Mark Santaniello)
- Add perf tooling unwind support for PowerPC (Paolo Bonzini)
- ... and various other improvements as well"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits)
perf auxtrace: Add CPU filter support
perf intel-pt: Do not use TSC packets for calculating CPU cycles to TSC
perf intel-pt: Update documentation to include new ptwrite and power events
perf intel-pt: Add example script for power events and PTWRITE
perf intel-pt: Synthesize new power and "ptwrite" events
perf intel-pt: Move code in intel_pt_synth_events() to simplify attr setting
perf intel-pt: Factor out intel_pt_set_event_name()
perf intel-pt: Tidy messages into called function intel_pt_synth_event()
perf intel-pt: Tidy Intel PT evsel lookup into separate function
perf intel-pt: Join needlessly wrapped lines
perf intel-pt: Remove unused instructions_sample_period
perf intel-pt: Factor out common code synthesizing event samples
perf script: Add synthesized Intel PT power and ptwrite events
perf/x86/intel: Constify the 'lbr_desc[]' array and make a function static
perf script: Add 'synth' field for synthesized event payloads
perf auxtrace: Add itrace option to output power events
perf auxtrace: Add itrace option to output ptwrite events
tools include: Add byte-swapping macros to kernel.h
perf script: Add 'synth' event type for synthesized events
x86/insn: perf tools: Add new ptwrite instruction
...
Decoding auxtrace data can take a long time. To avoid decoding
unnecessarily, filter auxtrace data that is collected per-cpu before it is
decoded.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-38-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
CBR (core-to-bus ratio) packets provide an indication of CPU frequency. A
more accurate measure can be made by counting the cycles (given by CYC
packets) in between other timing packets (either MTC or TSC). Using TSC
packets has at least 2 issues: 1) timing might have stopped (e.g. mwait) or
2) TSC packets within PSB+ might slip past CYC packets. For now, simply do
not use TSC packets for calculating CPU cycles to TSC. That leaves the case
where 2 MTC packets are used, otherwise falling back to the CBR value.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-37-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Synthesize new power and ptwrite events.
Power events report changes to C-state but I have also added support
for the existing CBR (core-to-bus ratio) packet and included that
when outputting power events.
The PTWRITE packet is associated with the new "ptwrite" instruction,
which is essentially just a way to stuff a 32 or 64 bit value into the
PT trace.
More details can be found in the patches that add documentation and in
the Intel SDM.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1498811805-2335-1-git-send-email-adrian.hunter@intel.com
[ Copy the description of such packet from the patchkit cover message ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
intel_pt_synth_events() uses the same attr structure to create each event.
Move the code around a bit to simplify that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-33-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out common code in functions synthesizing event samples i.e.
intel_pt_synth_branch_sample(), intel_pt_synth_instruction_sample() and
intel_pt_synth_transaction_sample().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-27-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instruction trace decoders such as Intel PT may have additional information
recorded in the trace. For example, Intel PT has power information and a
there is a new instruction 'ptwrite' that can write a value into a PTWRITE
trace packet.
Such information may be associated with an IP and so can be treated as a
sample (PERF_RECORD_SAMPLE). Custom data can be incorporated in the
sample as raw_data (PERF_SAMPLE_RAW).
However a means of identifying the raw data format is needed. That will
be done by synthesizing an attribute for it.
So add an attribute type for custom synthesized events. Different
synthesized events will be identified by the attribute 'config'.
Committer notes:
Start those PERF_TYPE_ after the PMU range, i.e. after (INT_MAX + 1U),
i.e. after perf_pmu_register() -> idr_alloc(end=0).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1498040239-32418-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add ptwrite to the op code map and the perf tools new instructions test.
To run the test:
$ tools/perf/perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ tools/perf/perf test -v "x86 ins" 2>&1 | grep ptwrite
For information about ptwrite, refer the Intel SDM.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: http://lkml.kernel.org/r/1495180230-19367-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Finally can nuke this function, no more users.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-eivvvzn8ie6w42gy3batxoy7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just warn the user and ignore those values.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-tbf60nj3ierm6hrkhpothymx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To consolidate the error reporting facility.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-b41iot1094katoffdf19w9zk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now everything uses pr_warning(), so ditch it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-hv8r0mgdhk73wtfq3zrhavgx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Convert sole user of warning() in this file to pr_warning(),
consolidating error reporting facilities.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3y7yf6v673ujl2rcs34tzv8n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
warning() is going away, consolidating error reporting.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5r3636cwl4z1varo90mervai@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Michael reported the segfault when kernel.kptr_restrict=2 is set.
$ perf record ls
...
perf: Segmentation fault
Obtained 16 stack frames.
./perf(dump_stack+0x2d) [0x5068df]
./perf(sighandler_dump_stack+0x2d) [0x5069bf]
./perf() [0x43e47b]
/lib64/libc.so.6(+0x3594f) [0x7f762004794f]
/lib64/libc.so.6(strlen+0x26) [0x7f762009ef86]
/lib64/libc.so.6(__strdup+0xd) [0x7f762009ecbd]
./perf(maps__set_kallsyms_ref_reloc_sym+0x4d) [0x51590f]
./perf(machine__create_kernel_maps+0x136) [0x50a7de]
./perf(perf_session__create_kernel_maps+0x2c) [0x510a81]
./perf(perf_session__new+0x13d) [0x510e23]
./perf() [0x43fd61]
./perf(cmd_record+0x704) [0x441823]
./perf() [0x4bc1a0]
./perf() [0x4bc40d]
./perf() [0x4bc55f]
./perf(main+0x2d5) [0x4bc939]
Segmentation fault (core dumped)
The reason is that with kernel.kptr_restrict=2, we don't get
the symbol from machine__get_running_kernel_start, which we
want to use in maps__set_kallsyms_ref_reloc_sym and we crash.
Check the symbol name value before calling
maps__set_kallsyms_ref_reloc_sym() and succeed without ref_reloc_sym
being set. It's safe because we check its existence before we use it.
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170626095153.553-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In commit 613f050d68 ("perf probe: Fix to probe on gcc generated
functions in modules"), the offset from symbol is, incorrectly, added
to the trace point address. This leads to incorrect probe trace points
for inlined functions and when using relative line number on symbols.
Prior this patch:
$ perf probe -m nf_nat -D in_range
p:probe/in_range nf_nat:in_range.isra.9+0
$ perf probe -m i40e -D i40e_clean_rx_irq
p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+2212
$ perf probe -m i40e -D i40e_clean_rx_irq:16
p:probe/i40e_clean_rx_irq i40e:i40e_lan_xmit_frame+626
After:
$ perf probe -m nf_nat -D in_range
p:probe/in_range nf_nat:in_range.isra.9+0
$ perf probe -m i40e -D i40e_clean_rx_irq
p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+1106
$ perf probe -m i40e -D i40e_clean_rx_irq:16
p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+2665
Committer testing:
Using 'pfunct', a tool found in the 'dwarves' package [1], one can ask what are
the functions that while not being explicitely marked as inline, were inlined
by the compiler:
# pfunct --cc_inlined /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko | head
__ew32
e1000_regdump
e1000e_dump_ps_pages
e1000_desc_unused
e1000e_systim_to_hwtstamp
e1000e_rx_hwtstamp
e1000e_update_rdt_wa
e1000e_update_tdt_wa
e1000_put_txbuf
e1000_consume_page
Then ask 'perf probe' to produce the kprobe_tracer probe definitions for two of
them:
# perf probe -m e1000e -D e1000e_rx_hwtstamp
p:probe/e1000e_rx_hwtstamp e1000e:e1000_receive_skb+74
# perf probe -m e1000e -D e1000_consume_page
p:probe/e1000_consume_page e1000e:e1000_clean_jumbo_rx_irq+876
p:probe/e1000_consume_page_1 e1000e:e1000_clean_jumbo_rx_irq+1506
p:probe/e1000_consume_page_2 e1000e:e1000_clean_rx_irq_ps+1074
Now lets concentrate on the 'e1000_consume_page' one, that was inlined twice in
e1000_clean_jumbo_rx_irq(), lets see what readelf says about the DWARF tags for
that function:
$ readelf -wi /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
<SNIP>
<1><13e27b>: Abbrev Number: 121 (DW_TAG_subprogram)
<13e27c> DW_AT_name : (indirect string, offset: 0xa8945): e1000_clean_jumbo_rx_irq
<13e287> DW_AT_low_pc : 0x17a30
<3><13e6ef>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
<13e6f0> DW_AT_abstract_origin: <0x13ed2c>
<13e6f4> DW_AT_low_pc : 0x17be6
<SNIP>
<1><13ed2c>: Abbrev Number: 142 (DW_TAG_subprogram)
<13ed2e> DW_AT_name : (indirect string, offset: 0xa54c3): e1000_consume_page
So, the first time in e1000_clean_jumbo_rx_irq() where e1000_consume_page() is
inlined is at PC 0x17be6, which subtracted from e1000_clean_jumbo_rx_irq()'s
address, gives us the offset we should use in the probe definition:
0x17be6 - 0x17a30 = 438
but above we have 876, which is twice as much.
Lets see the second inline expansion of e1000_consume_page() in
e1000_clean_jumbo_rx_irq():
<3><13e86e>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
<13e86f> DW_AT_abstract_origin: <0x13ed2c>
<13e873> DW_AT_low_pc : 0x17d21
0x17d21 - 0x17a30 = 753
So we where adding it at twice the offset from the containing function as we
should.
And then after this patch:
# perf probe -m e1000e -D e1000e_rx_hwtstamp
p:probe/e1000e_rx_hwtstamp e1000e:e1000_receive_skb+37
# perf probe -m e1000e -D e1000_consume_page
p:probe/e1000_consume_page e1000e:e1000_clean_jumbo_rx_irq+438
p:probe/e1000_consume_page_1 e1000e:e1000_clean_jumbo_rx_irq+753
p:probe/e1000_consume_page_2 e1000e:e1000_clean_jumbo_rx_irq+1353
#
Which matches the two first expansions and shows that because we were
doubling the offset it would spill over the next function:
readelf -sw /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
673: 0000000000017a30 1626 FUNC LOCAL DEFAULT 2 e1000_clean_jumbo_rx_irq
674: 0000000000018090 2013 FUNC LOCAL DEFAULT 2 e1000_clean_rx_irq_ps
This is the 3rd inline expansion of e1000_consume_page() in
e1000_clean_jumbo_rx_irq():
<3><13ec77>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
<13ec78> DW_AT_abstract_origin: <0x13ed2c>
<13ec7c> DW_AT_low_pc : 0x17f79
0x17f79 - 0x17a30 = 1353
So:
0x17a30 + 2 * 1353 = 0x184c2
And:
0x184c2 - 0x18090 = 1074
Which explains the bogus third expansion for e1000_consume_page() to end up at:
p:probe/e1000_consume_page_2 e1000e:e1000_clean_rx_irq_ps+1074
All fixed now :-)
[1] https://git.kernel.org/pub/scm/devel/pahole/pahole.git/
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 613f050d68 ("perf probe: Fix to probe on gcc generated functions in modules")
Link: http://lkml.kernel.org/r/20170621164134.5701-1-bjorn.topel@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'transactions_sample_type' is needed to correctly inject transactions
samples but it was not being set. Set it from the event sample type.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-18-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'initial_skip' is checked inside the sample synthesis functions which means
it is actually being done twice for 'instructions' and 'transactions'
samples. Remove the redundant checks.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-17-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Future proof CBR packet decoding by passing through also the undefined
'reserved' byte in the packet payload.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add decoder support for PTWRITE, MWAIT, PWRE, PWRX and EXSTOP packets. This
patch only affects the decoder, so the tools still do not select or consume
the new information. That is added in subsequent patches.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The kernel now supports the disabling of branch tracing, however the
decoder assumes branch tracing is always enabled. Pass through a parameter
to indicate whether branch tracing is enabled and use it to avoid cases
when the decoder is expecting branch packets. There are 2 such cases.
First, FUP packets which can bind to an IP even when there is no branch
tracing. Secondly, the decoder will try to use branch packets to find an IP
to start decoding or to recover from errors.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-11-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes a FUP packet is associated with a TSX transaction and a flag is
set to indicate that. Ensure that flag is cleared on any error condition
because at that point the decoder can no longer assume it is correct.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1495786658-18063-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The decoder will try to use branch packets to find an IP to start decoding
or to recover from errors. Currently the FUP packet is used only in the
case of an overflow, however there is no reason for that to be a special
case. So just use FUP always when scanning for an IP.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1495786658-18063-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel PT uses IP compression based on the last IP. For decoding purposes,
'last IP' is not updated when a branch target has been suppressed, which is
indicated by IPBytes == 0. IPBytes is stored in the packet 'count', so
ensure never to set 'last_ip' when packet 'count' is zero.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1495786658-18063-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel PT uses IP compression based on the last IP. For decoding
purposes, 'last IP' is considered to be reset to zero whenever there is
a synchronization packet (PSB). The decoder wasn't doing that, and was
treating the zero value to mean that there was no last IP, whereas
compression can be done against the zero value. Fix by setting last_ip
to zero when a PSB is received and keep track of have_last_ip.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1495786658-18063-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The decoder uses its current timestamp in samples. Usually that is a
timestamp that has already passed, but in some cases it is a timestamp
for a branch that the decoder is walking towards, and consequently
hasn't reached. Improve that situation by using the pkt_state to
determine when to use the current or previous timestamp.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1495786658-18063-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implementing a new --smi-cost mode in perf stat to measure SMI cost.
During the measurement, the /sys/device/cpu/freeze_on_smi will be set.
The measurement can be done with one counter (unhalted core cycles), and
two free running MSR counters (IA32_APERF and SMI_COUNT).
In practice, the percentages of SMI core cycles should be more useful
than absolute value. So the output will be the percentage of SMI core
cycles and SMI#. metric_only will be set by default.
SMI cycles% = (aperf - unhalted core cycles) / aperf
Here is an example output.
Performance counter stats for 'sudo echo ':
SMI cycles% SMI#
0.1% 1
0.010858678 seconds time elapsed
Users who wants to get the actual value can apply additional
--no-metric-only.
Signed-off-by: Kan Liang <Kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1495825538-5230-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Curious as to what this was for I looked at /usr/include/ and only some
python headers define this, and it ends up being to enable "extensions"
on some old OSes:
/* Enable extensions on AIX 3, Interix */
I guess we can remove this one safely.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-omnundlxo2brs552bdl6m0j1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While trying to reduce util.[ch] I noticed that fetch_kernel_version()
and fetch_ubuntu_kernel_version() do lots of operations only to check if
they are needed, i.e. it checks if the pointer where to return the
kernel version is NULL only after obtaining the kernel version from
/proc/version_signature or by parsing the results from uname().
Do it earlier not to confuse people reading this code in the future :-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-i94qwyekk4tzbu0b9ce1r1mz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And make it static, nobody else uses it, if we ever need it in more
places we can carve a new source file for process related methods,
for now lets reduce util.{c,h} a tad more.
Link: http://lkml.kernel.org/n/tip-zgb28rllvypjibw52aaz9p15@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo