Pull exit cleanups from Eric Biederman:
"While looking at some issues related to the exit path in the kernel I
found several instances where the code is not using the existing
abstractions properly.
This set of changes introduces force_fatal_sig a way of sending a
signal and not allowing it to be caught, and corrects the misuse of
the existing abstractions that I found.
A lot of the misuse of the existing abstractions are silly things such
as doing something after calling a no return function, rolling BUG by
hand, doing more work than necessary to terminate a kernel thread, or
calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL).
In the review a deficiency in force_fatal_sig and force_sig_seccomp
where ptrace or sigaction could prevent the delivery of the signal was
found. I have added a change that adds SA_IMMUTABLE to change that
makes it impossible to interrupt the delivery of those signals, and
allows backporting to fix force_sig_seccomp
And Arnd found an issue where a function passed to kthread_run had the
wrong prototype, and after my cleanup was failing to build."
* 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits)
soc: ti: fix wkup_m3_rproc_boot_thread return type
signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed
signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)
exit/r8188eu: Replace the macro thread_exit with a simple return 0
exit/rtl8712: Replace the macro thread_exit with a simple return 0
exit/rtl8723bs: Replace the macro thread_exit with a simple return 0
signal/x86: In emulate_vsyscall force a signal instead of calling do_exit
signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig
signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails
exit/syscall_user_dispatch: Send ordinary signals on failure
signal: Implement force_fatal_sig
exit/kthread: Have kernel threads return instead of calling do_exit
signal/s390: Use force_sigsegv in default_trap_handler
signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.
signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON
signal/sparc: In setup_tsb_params convert open coded BUG into BUG
signal/powerpc: On swapcontext failure force SIGSEGV
signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL)
signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT
signal/sparc32: Remove unreachable do_exit in do_sparc_fault
...
- new driver: gpio-modepin (plus relevant change in zynqmp firmware)
- add interrupt support to gpio-virtio
- enable the 'gpio-line-names' property in the DT bindings for gpio-rockchip
- use the subsystem helpers where applicable in gpio-uniphier instead of
accessing IRQ structures directly
- code shrink in gpio-xilinx
- add interrupt to gpio-mlxbf2 (and include the removal of custom interrupt
code from the mellanox ethernet driver)
- support multiple interrupts per bank in gpio-tegra186 (and force one interrupt
per bank in older models)
- fix GPIO line IRQ offset calculation in gpio-realtek-otto
- drop unneeded MODULE_ALIAS expansions in multiple drivers
- code cleanup in gpio-aggregator
- minor improvements in gpio-max730x and gpio-mc33880
- Kconfig cleanups
-----BEGIN PGP SIGNATURE-----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=mKh0
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have a single new driver, new features in others and some cleanups
all over the place.
Nothing really stands out and it is all relatively small.
- new driver: gpio-modepin (plus relevant change in zynqmp firmware)
- add interrupt support to gpio-virtio
- enable the 'gpio-line-names' property in the DT bindings for
gpio-rockchip
- use the subsystem helpers where applicable in gpio-uniphier instead
of accessing IRQ structures directly
- code shrink in gpio-xilinx
- add interrupt to gpio-mlxbf2 (and include the removal of custom
interrupt code from the mellanox ethernet driver)
- support multiple interrupts per bank in gpio-tegra186 (and force
one interrupt per bank in older models)
- fix GPIO line IRQ offset calculation in gpio-realtek-otto
- drop unneeded MODULE_ALIAS expansions in multiple drivers
- code cleanup in gpio-aggregator
- minor improvements in gpio-max730x and gpio-mc33880
- Kconfig cleanups"
* tag 'gpio-updates-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
virtio_gpio: drop packed attribute
gpio: virtio: Add IRQ support
gpio: realtek-otto: fix GPIO line IRQ offset
gpio: clean up Kconfig file
net: mellanox: mlxbf_gige: Replace non-standard interrupt handling
gpio: mlxbf2: Introduce IRQ support
gpio: mc33880: Drop if with an always false condition
gpio: max730x: Make __max730x_remove() return void
gpio: aggregator: Wrap access to gpiochip_fwd.tmp[]
gpio: modepin: Add driver support for modepin GPIO controller
dt-bindings: gpio: zynqmp: Add binding documentation for modepin
firmware: zynqmp: Add MMIO read and write support for PS_MODE pin
gpio: tps65218: drop unneeded MODULE_ALIAS
gpio: max77620: drop unneeded MODULE_ALIAS
gpio: xilinx: simplify getting .driver_data
gpio: tegra186: Support multiple interrupts per bank
gpio: tegra186: Force one interrupt per bank
gpio: uniphier: Use helper functions to get private data from IRQ data
gpio: uniphier: Use helper function to get IRQ hardware number
dt-bindings: gpio: add gpio-line-names to rockchip,gpio-bank.yaml
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().
The callers are updated with the below semantic patch:
@@
expression addr;
expression size;
@@
- memblock_free(addr, size);
+ memblock_phys_free(addr, size);
Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These are all the driver updates for SoC specific drivers. There
are a couple of subsystems with individual maintainers picking up
their patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this
tree this time. There are only minor changes, but they depend
on other tegra driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process.
This depends on a small sound driver change that is included
here as well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains
a mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for
the "Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed
BMCs, something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better suspend/resume
support
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape,
allwinner, broadcom, and omap.
-----BEGIN PGP SIGNATURE-----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=tUuj
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are all the driver updates for SoC specific drivers. There are a
couple of subsystems with individual maintainers picking up their
patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this tree this
time. There are only minor changes, but they depend on other tegra
driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process. This
depends on a small sound driver change that is included here as
well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains a
mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for the
"Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed BMCs,
something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better
suspend/resume support"
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
layerscape, allwinner, broadcom, and omap"
* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
optee: Fix spelling mistake "reclain" -> "reclaim"
Revert "firmware: qcom: scm: Add support for MC boot address API"
qcom: spm: allow compile-testing
firmware: arm_ffa: Remove unused 'compat_version' variable
soc: samsung: exynos-chipid: add exynosautov9 SoC support
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: aspeed: Add UART routing support
soc: fsl: dpio: rename the enqueue descriptor variable
soc: fsl: dpio: use an explicit NULL instead of 0
...
Lots of code development have been see in ASoC side as usual, while
the continued development on memalloc helper and USB-audio low-
latency support are found in the rest. Note that a few changes in the
unusual places like arch/sh are included, which are a part of ASoC DAI
format cleanups.
ALSA core:
- Continued memallloc helper updates and cleanups, now supporting
non-coherent and non-contiguous pages
- Fixes for races in mixer OSS layer
ASoC:
- A new version of the audio graph card which supports a wider range
of systems
- Several conversions to YAML DT bindings
- Continuing cleanups to the SOF and Intel code
- Move of the Cirrus DSP framework into drivers/firmware to allow for
future use by non-audio DSPs
- An overhaul of the cs42l42 driver, correcting many problems
- DAI format terminology conversions over many drivers for cleanups
- Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
RT5682S, and RT9120 and Rockchip RV1126 and RK3568
USB-audio:
- Continued improvements on low-latency playback
- Quirks for Pioneer devices, Line6 HX-Stomp XL, Audient iD14
HD-audio:
- Reduce excessive udelay() calls on Intel platforms; this should
reduce the CPU load with PulseAudio
- Quirks for HP and Clevo laptops
FireWire:
- Support for meter information on MOTU
-----BEGIN PGP SIGNATURE-----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=UBNY
-----END PGP SIGNATURE-----
Merge tag 'sound-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of code development have been see in ASoC side as usual, while
the continued development on memalloc helper and USB-audio low-
latency support are found in the rest.
Note that a few changes in the unusual places like arch/sh are
included, which are a part of ASoC DAI format cleanups.
ALSA core:
- Continued memalloc helper updates and cleanups, now supporting
non-coherent and non-contiguous pages
- Fixes for races in mixer OSS layer
ASoC:
- A new version of the audio graph card which supports a wider range
of systems
- Several conversions to YAML DT bindings
- Continuing cleanups to the SOF and Intel code
- Move of the Cirrus DSP framework into drivers/firmware to allow for
future use by non-audio DSPs
- An overhaul of the cs42l42 driver, correcting many problems
- DAI format terminology conversions over many drivers for cleanups
- Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
RT5682S, and RT9120 and Rockchip RV1126 and RK3568
USB-audio:
- Continued improvements on low-latency playback
- Quirks for Pioneer devices, Line6 HX-Stomp XL, Audient iD14
HD-audio:
- Reduce excessive udelay() calls on Intel platforms; this should
reduce the CPU load with PulseAudio
- Quirks for HP and Clevo laptops
FireWire:
- Support for meter information on MOTU"
* tag 'sound-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (513 commits)
ALSA: usb-audio: Add quirk for Audient iD14
ALSA: hda/realtek: Add quirk for Clevo PC70HS
ALSA: usb-audio: Line6 HX-Stomp XL USB_ID for 48k-fixed quirk
ALSA: usb-audio: Add registration quirk for JBL Quantum 400
ASoC: rsnd: Fix an error handling path in 'rsnd_node_count()'
ASoC: tlv320aic3x: Make aic3x_remove() return void
ASoC: Intel: soc-acpi: use const for all uses of snd_soc_acpi_codecs
ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs
ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs
ASoC: Intel: sof_rt5682: use comp_ids to enumerate rt5682s
ASoC: Intel: sof_rt5682: detect codec variant in probe function
ASoC: soc-acpi: add comp_ids field for machine driver matching
ASoC: mediatek: mt8195: add mt8195-mt6359-rt1011-rt5682 bindings document
ASoC: mediatek: mt8195: add machine driver with mt6359, rt1011 and rt5682
ASoC: Stop dummy from overriding hwparams
ASoC: topology: Change topology device to card device
ASoC: topology: Use correct device for prints
ASoC: topology: Check for dapm widget completeness
ASoC: topology: Add header payload_size verification
ASoC: core: Remove invalid snd_soc_component_set_jack call
...
This is quite a quiet release for SPI, there's been a bit of cleanup to
the core from Uwe but nothing functionality wise. We have added several
new drivers, Cadence XSPI, Ingenic JZ47xx, Qualcomm SC7280 and SC7180
and Xilinx Versal OSPI.
There's a trivial conflict in the Tegra driver that's been causing
issues.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmGABLQACgkQJNaLcl1U
h9Bz2gf9FdjnFXXUQSDgz5tXbrcROCHAYyY9aI9xLFPXaup2ZacKFB5iQcCFaLAR
saOoiezNru+Y5MyyEhMcbRhyNeVNwTVven7r2SG6S3ldt3q6RaiDiBr5rUCaTNTj
AaatHLrpCfj4d/0Rgzh366BjbAthZQ9+f/c51pEfkoHyY8Kd0XJmi0pCuHnV8reT
vzJsGFctcc6Zkzp3M2bg0wG9T+OEJjeMMd/OeYHUFrfhvEsUm0ljRCy1/WRTQ0Fq
qlJO/m6YLo4a3D4bl/CH7WwsWrZ/rWEaL2/esyKH799E7MXOOY9D9YdRVU6m+hZS
pR1RjqqsXszIMkkviqbPtCA0tF7+4g==
=N0Jw
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This is quite a quiet release for SPI, there's been a bit of cleanup
to the core from Uwe but nothing functionality wise.
We have added several new drivers, Cadence XSPI, Ingenic JZ47xx,
Qualcomm SC7280 and SC7180 and Xilinx Versal OSPI"
* tag 'spi-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (41 commits)
spi: Convert NXP flexspi to json schema
spi: spi-geni-qcom: Add support for GPI dma
spi: fsi: Fix contention in the FSI2SPI engine
spi: spi-rpc-if: Check return value of rpcif_sw_init()
spi: tegra210-quad: Put device into suspend on driver removal
spi: tegra20-slink: Put device into suspend on driver removal
spi: bcm-qspi: Fix missing clk_disable_unprepare() on error in bcm_qspi_probe()
spi: at91-usart: replacing legacy gpio interface for gpiod
spi: replace snprintf in show functions with sysfs_emit
spi: cadence: Add of_node_put() before return
spi: orion: Add of_node_put() before goto
spi: cadence-quadspi: fix dma_unmap_single() call
spi: tegra20: fix build with CONFIG_PM_SLEEP=n
spi: bcm-qspi: add support for 3-wire mode for half duplex transfer
spi: bcm-qspi: Add mspi spcr3 32/64-bits xfer mode
spi: Make several public functions private to spi.c
spi: Reorder functions to simplify the next commit
spi: Remove unused function spi_busnum_to_master()
spi: Move comment about chipselect check to the right place
spi: fsi: Print status on error
...
Hi Linus,
Please, pull the following hardening fixes and cleanups that I've
been collecting during the last development cycle. All of them have
been baking in linux-next.
Fix -Wcast-function-type error:
- firewire: Remove function callback casts (Oscar Carter)
Fix application of sizeof operator:
- firmware/psci: fix application of sizeof to pointer (jing yangyang)
Replace open coded instances with size_t saturating arithmetic helpers:
- assoc_array: Avoid open coded arithmetic in allocator arguments (Len Baker)
- writeback: prefer struct_size over open coded arithmetic (Len Baker)
- aio: Prefer struct_size over open coded arithmetic (Len Baker)
- dmaengine: pxa_dma: Prefer struct_size over open coded arithmetic (Len Baker)
Flexible array transformation:
- KVM: PPC: Replace zero-length array with flexible array member (Len Baker)
Use 2-factor argument multiplication form:
- nouveau/svm: Use kvcalloc() instead of kvzalloc() (Gustavo A. R. Silva)
- xfs: Use kvcalloc() instead of kvzalloc() (Gustavo A. R. Silva)
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----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=Jk0U
-----END PGP SIGNATURE-----
Merge tag 'kspp-misc-fixes-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull hardening fixes and cleanups from Gustavo A. R. Silva:
"Various hardening fixes and cleanups that I've been collecting during
the last development cycle:
Fix -Wcast-function-type error:
- firewire: Remove function callback casts (Oscar Carter)
Fix application of sizeof operator:
- firmware/psci: fix application of sizeof to pointer (jing yangyang)
Replace open coded instances with size_t saturating arithmetic
helpers:
- assoc_array: Avoid open coded arithmetic in allocator arguments
(Len Baker)
- writeback: prefer struct_size over open coded arithmetic (Len
Baker)
- aio: Prefer struct_size over open coded arithmetic (Len Baker)
- dmaengine: pxa_dma: Prefer struct_size over open coded arithmetic
(Len Baker)
Flexible array transformation:
- KVM: PPC: Replace zero-length array with flexible array member (Len
Baker)
Use 2-factor argument multiplication form:
- nouveau/svm: Use kvcalloc() instead of kvzalloc() (Gustavo A. R.
Silva)
- xfs: Use kvcalloc() instead of kvzalloc() (Gustavo A. R. Silva)"
* tag 'kspp-misc-fixes-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
firewire: Remove function callback casts
nouveau/svm: Use kvcalloc() instead of kvzalloc()
firmware/psci: fix application of sizeof to pointer
dmaengine: pxa_dma: Prefer struct_size over open coded arithmetic
KVM: PPC: Replace zero-length array with flexible array member
aio: Prefer struct_size over open coded arithmetic
writeback: prefer struct_size over open coded arithmetic
xfs: Use kvcalloc() instead of kvzalloc()
assoc_array: Avoid open coded arithmetic in allocator arguments
Disable EFI runtime services by default on PREEMPT_RT, while adding the
ability to re-enable them on demand by passing efi=runtime on the
command line.
-----BEGIN PGP SIGNATURE-----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=pJcu
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Borislav Petkov:
"The last EFI pull request which is forwarded through the tip tree, for
v5.16. From now on, Ard will be sending stuff directly.
Disable EFI runtime services by default on PREEMPT_RT, while adding
the ability to re-enable them on demand by passing efi=runtime on the
command line"
* tag 'efi-next-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Allow efi=runtime
efi: Disable runtime services on RT
In 2009 Oleg reworked[1] the kernel threads so that it is not
necessary to call do_exit if you are not using kthread_stop(). Remove
the explicit calls of do_exit and complete_and_exit (with a NULL
completion) that were previously necessary.
[1] 63706172f3 ("kthreads: rework kthread_stop()")
Link: https://lkml.kernel.org/r/20211020174406.17889-12-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
This reverts commits 55845f46df and c50031f03d, since this still
causes a build failure when QCOM_SCM is a loadable module, or when
CONFIG_SMP is disabled:
ERROR: modpost: "cpu_logical_map" [drivers/firmware/qcom-scm.ko] undefined!
This be done better for 5.17, but it's too late now to rework
properly.
Fixes: c50031f03d ("firmware: qcom: scm: Don't break compile test on non-ARM platforms")
Fixes: 55845f46df ("firmware: qcom: scm: Add support for MC boot address API")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
sizeof when applied to a pointer typed expression gives the size of
the pointer.
./drivers/firmware/psci/psci_checker.c:158:41-47: ERROR application of sizeof to pointer
This issue was detected with the help of Coccinelle.
Fixes: 7401056de5 ("drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests")
Cc: stable@vger.kernel.org
Reported-by: Zeal Robot <zealci@zte.com.cn>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Just couple of minor updates:
- Adding support for MEMORY_LEND API
- Handling compatibility with different firmware versions(especially
dealing with newer/higher versions than the one supported by the driver)
-----BEGIN PGP SIGNATURE-----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=uj5s
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=d/JI
-----END PGP SIGNATURE-----
Merge tag 'arm-ffa-updates-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
Arm FF-A updates for v5.16
Just couple of minor updates:
- Adding support for MEMORY_LEND API
- Handling compatibility with different firmware versions(especially
dealing with newer/higher versions than the one supported by the driver)
* tag 'arm-ffa-updates-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Remove unused 'compat_version' variable
firmware: arm_ffa: Add support for MEM_LEND
firmware: arm_ffa: Handle compatibility with different firmware versions
firmware: arm_ffa: Fix __ffa_devices_unregister
firmware: arm_ffa: Add missing remove callback to ffa_bus_type
Link: https://lore.kernel.org/r/20211026141535.1920602-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This introduces the Qualcomm "sleep stats" driver, which aids the
efforts of bringing various Qualcomm platforms into low power mode.
The SMP2P driver gains support for negotiating the "SSR" feature, which
is used to better synchronize some corner cases that might appear as the
remoteproc is recovering from a crash.
The socinfo driver learns about a few new PMICs.
SMEM is updated so that it's possible to put the compatible property
directly in the reserved-memory node, to avoid having to have a separate
node just pointing to the memory-region.
Lastly it fixes some bugs in smp2p, apr, rpmhpd drivers, notably
avoiding the issue where powering on a power-domain using rpmhpd while
keeping the performance_state at 0 is a nop
-----BEGIN PGP SIGNATURE-----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=NTMF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=HxRd
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
More Qualcomm driver updates for v5.16
This introduces the Qualcomm "sleep stats" driver, which aids the
efforts of bringing various Qualcomm platforms into low power mode.
The SMP2P driver gains support for negotiating the "SSR" feature, which
is used to better synchronize some corner cases that might appear as the
remoteproc is recovering from a crash.
The socinfo driver learns about a few new PMICs.
SMEM is updated so that it's possible to put the compatible property
directly in the reserved-memory node, to avoid having to have a separate
node just pointing to the memory-region.
Lastly it fixes some bugs in smp2p, apr, rpmhpd drivers, notably
avoiding the issue where powering on a power-domain using rpmhpd while
keeping the performance_state at 0 is a nop
* tag 'qcom-drivers-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: qcom: smp2p: add feature negotiation and ssr ack feature support
soc: qcom: Add Sleep stats driver
dt-bindings: Introduce QCOM Sleep stats bindings
soc: qcom: socinfo: add two missing PMIC IDs
soc: qcom: rpmhpd: Make power_on actually enable the domain
soc: qcom: smem: Support reserved-memory description
dt-bindings: soc: smem: Make indirection optional
dt-bindings: sram: Document qcom,rpm-msg-ram
Link: https://lore.kernel.org/r/20211026140706.1205989-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The newly added ffa_compatible_version_find() function causes a
build warning because of a variable that is never used:
drivers/firmware/arm_ffa/driver.c:180:6: error: unused variable 'compat_version' [-Werror,-Wunused-variable]
u32 compat_version;
Link: https://lore.kernel.org/r/20211026083400.3444946-1-arnd@kernel.org
Fixes: 8e3f9da608 ("firmware: arm_ffa: Handle compatibility with different firmware versions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The introduction of __qcom_scm_set_boot_addr_mc() relies on
cpu_logical_map() and MPIDR_AFFINITY_LEVEL() from smp_plat.h, but only
ARM and ARM64 has this include file, so the introduction of this
dependency broke compile testing on e.g. x86_64.
Make the inclusion of smp_plat.h and the affected function depend on
ARM || ARM64 to allow the code to still be compiled.
Fixes: 55845f46df ("firmware: qcom: scm: Add support for MC boot address API")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211025025816.2937465-1-bjorn.andersson@linaro.org
It looks like the old QCOM_SCM_BOOT_SET_ADDR API is broken on some
MSM8916 firmware versions that implement the newer SMC32 calling
convention. It just returns -EINVAL no matter which arguments are
being passed.
This does not cause any problems downstream because it first tries
to use the new multi-cluster API replacement which is working fine.
Implement support for the multi-cluster variant of the SCM call
by attempting it first but still fallback to the old call in case
of an error. Also, to be absolutely sure only use the multi-cluster
variant with the SMC calling convention since older platforms should
not need this.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004204955.21077-12-stephan@gerhold.net
Since __qcom_scm_is_call_available() returns bool, have it return false
instead of -EINVAL if an invalid SMC convention is detected.
This fixes the Smatch static checker warning:
drivers/firmware/qcom_scm.c:255 __qcom_scm_is_call_available()
warn: signedness bug returning '(-22)'
Fixes: 9d11af8b06 ("firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1633982414-28347-1-git-send-email-quic_gurus@quicinc.com
As part of the FF-A spec, an endpoint is allowed to transfer access of,
or lend, a memory region to one or more borrowers.
Extend the existing memory sharing implementation to support
FF-A MEM_LEND functionality and expose this to other kernel drivers.
Note that upon a successful MEM_LEND request the caller must ensure that
the memory region specified is not accessed until a successful
MEM_RECALIM call has been made. On systems with a hypervisor present
this will been enforced, however on systems without a hypervisor the
responsibility falls to the calling kernel driver to prevent access.
Link: https://lore.kernel.org/r/20211015165742.2513065-1-marc.bonnici@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The driver currently just support v1.0 of Arm FFA specification. It also
expects the firmware implementation to match the same and bail out if it
doesn't match. This is causing issue when running with higher version of
firmware implementation(e.g. v1.1 which will released soon).
In order to support compatibility with different firmware versions, let
us add additional checks and find the compatible version the driver can
work with.
Link: https://lore.kernel.org/r/20211013091127.990992-1-sudeep.holla@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Low priority fixes but fixes nonetheless:
- update stub diagnostic print that is no longer accurate
- avoid statically allocated buffer for CPER error record decoding
- avoid sleeping on the efi_runtime semaphore when calling the
ResetSystem EFI runtime service
-----BEGIN PGP SIGNATURE-----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=+LOo
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Borislav Petkov:
"Forwarded from Ard Biesheuvel through the tip tree. Ard will send
stuff directly in the near future.
Low priority fixes but fixes nonetheless:
- update stub diagnostic print that is no longer accurate
- avoid statically allocated buffer for CPER error record decoding
- avoid sleeping on the efi_runtime semaphore when calling the
ResetSystem EFI runtime service"
* tag 'efi-urgent-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Change down_interruptible() in virt_efi_reset_system() to down_trylock()
efi/cper: use stack buffer for error record decoding
efi/libstub: Simplify "Exiting bootservices" message
This drops the use of power-domains for exposing the load_state from the
QMP driver to clients, to avoid issues related to system suspend.
SMP2P becomes wakeup capable, to allow dying remoteprocs to wake up
Linux from suspend to perform recovery.
It adds RPM power-domain support for SM6350 and MSM8953 and base RPM
support for MSM8953 and QCM2290.
It adds support for MSM8996, SDM630 and SDM660 in the SPM driver, which
will enable the introduction of proper voltage scaling of the CPU
subsystem.
Support for releasing secondary CPUs on MSM8226 is introduced.
The Asynchronous Packet Router (APR) driver is extended to support the
new Generic Packet Router (GPR) variant, which is used to communicate
with the firmware in the new AudioReach audio driver.
Lastly it transitions a number of drivers to safer string functions, as
well as switching things to use devm_platform_ioremap_resource().
-----BEGIN PGP SIGNATURE-----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=FE4j
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=LLU7
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.16
This drops the use of power-domains for exposing the load_state from the
QMP driver to clients, to avoid issues related to system suspend.
SMP2P becomes wakeup capable, to allow dying remoteprocs to wake up
Linux from suspend to perform recovery.
It adds RPM power-domain support for SM6350 and MSM8953 and base RPM
support for MSM8953 and QCM2290.
It adds support for MSM8996, SDM630 and SDM660 in the SPM driver, which
will enable the introduction of proper voltage scaling of the CPU
subsystem.
Support for releasing secondary CPUs on MSM8226 is introduced.
The Asynchronous Packet Router (APR) driver is extended to support the
new Generic Packet Router (GPR) variant, which is used to communicate
with the firmware in the new AudioReach audio driver.
Lastly it transitions a number of drivers to safer string functions, as
well as switching things to use devm_platform_ioremap_resource().
* tag 'qcom-drivers-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (40 commits)
soc: qcom: apr: Add GPR support
soc: dt-bindings: qcom: add gpr bindings
soc: qcom: apr: make code more reuseable
soc: dt-bindings: qcom: apr: deprecate qcom,apr-domain property
soc: dt-bindings: qcom: apr: convert to yaml
dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions
dt-bindings: msm/dp: Remove aoss-qmp header
soc: qcom: aoss: Drop power domain support
dt-bindings: soc: qcom: aoss: Drop the load state power-domain
soc: qcom: smp2p: Add wakeup capability to SMP2P IRQ
dt-bindings: power: rpmpd: Add SM6350 to rpmpd binding
dt-bindings: soc: qcom: aoss: Add SM6350 compatible
soc: qcom: llcc: Disable MMUHWT retention
soc: qcom: smd-rpm: Add QCM2290 compatible
dt-bindings: soc: qcom: smd-rpm: Add QCM2290 compatible
firmware: qcom_scm: Add compatible for MSM8953 SoC
dt-bindings: firmware: qcom-scm: Document msm8953 bindings
soc: qcom: pdr: Prefer strscpy over strcpy
soc: qcom: rpmh-rsc: Make use of the helper function devm_platform_ioremap_resource_byname()
soc: qcom: gsbi: Make use of the helper function devm_platform_ioremap_resource()
...
Link: https://lore.kernel.org/r/20211012173442.1017010-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Couple of fixes addressing issues when FFA driver is build as a module.
One adds the device unregistration which was missing and causes issue
when loading the module second time after unloading once. Another one
adds the missing remove callback on the ffa bus which was missing due
to which modules depending on FFA(e.g. OPTEE) will fail to remove the
device and faults next time that module is loaded again.
-----BEGIN PGP SIGNATURE-----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=m1dF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=dDfV
-----END PGP SIGNATURE-----
Merge tag 'ffa-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A driver fixes for v5.15
Couple of fixes addressing issues when FFA driver is build as a module.
One adds the device unregistration which was missing and causes issue
when loading the module second time after unloading once. Another one
adds the missing remove callback on the ffa bus which was missing due
to which modules depending on FFA(e.g. OPTEE) will fail to remove the
device and faults next time that module is loaded again.
* tag 'ffa-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix __ffa_devices_unregister
firmware: arm_ffa: Add missing remove callback to ffa_bus_type
Link: https://lore.kernel.org/r/20211006153231.4061789-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is one build fix for Arm platforms that ended up impacting most
architectures because of the way the drivers/firmware Kconfig file is
wired up:
The CONFIG_QCOM_SCM dependency have caused a number of randconfig
regressions over time, and some still remain in v5.15-rc4. The
fix we agreed on in the end is to make this symbol selected by any
driver using it, and then building it even for non-Arm platforms with
CONFIG_COMPILE_TEST.
To make this work on all architectures, the drivers/firmware/Kconfig
file needs to be included for all architectures to make the symbol
itself visible.
In a separate discussion, we found that a sound driver patch that is
pending for v5.16 needs the same change to include this Kconfig file,
so the easiest solution seems to have my Kconfig rework included in v5.15.
There is a small merge conflict against an earlier partial fix for the
QCOM_SCM dependency problems.
Finally, the branch also includes a small unrelated build fix for NOMMU
architectures.
Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/
Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=187C
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"There is one build fix for Arm platforms that ended up impacting most
architectures because of the way the drivers/firmware Kconfig file is
wired up:
The CONFIG_QCOM_SCM dependency have caused a number of randconfig
regressions over time, and some still remain in v5.15-rc4. The fix we
agreed on in the end is to make this symbol selected by any driver
using it, and then building it even for non-Arm platforms with
CONFIG_COMPILE_TEST.
To make this work on all architectures, the drivers/firmware/Kconfig
file needs to be included for all architectures to make the symbol
itself visible.
In a separate discussion, we found that a sound driver patch that is
pending for v5.16 needs the same change to include this Kconfig file,
so the easiest solution seems to have my Kconfig rework included in
v5.15.
Finally, the branch also includes a small unrelated build fix for
NOMMU architectures"
Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/
Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/
* tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere
qcom_scm: hide Kconfig symbol
firmware: include drivers/firmware/Kconfig unconditionally
Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Building the bpmp-debugfs driver for Arm results in a warning for stack usage:
drivers/firmware/tegra/bpmp-debugfs.c:321:16: error: stack frame size of 1224 bytes in function 'bpmp_debug_store' [-Werror,-Wframe-larger-than=]
static ssize_t bpmp_debug_store(struct file *file, const char __user *buf,
It should be possible to rearrange the code to not require two separate
buffers for the file name, but the easiest workaround is to use dynamic
allocation.
Fixes: 5e37b9c137 ("firmware: tegra: Add support for in-band debug")
Link: https://lore.kernel.org/all/20201204193714.3134651-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[treding@nvidia.com: consistently return NULL on failure]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Now that SCM can be a loadable module, we have to add another
dependency to avoid link failures when ipa or adreno-gpu are
built-in:
aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe':
ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available'
ld.lld: error: undefined symbol: qcom_scm_is_available
>>> referenced by adreno_gpu.c
>>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a
This can happen when CONFIG_ARCH_QCOM is disabled and we don't select
QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd
use a similar dependency here to what we have for QCOM_RPROC_COMMON,
but that causes dependency loops from other things selecting QCOM_SCM.
This appears to be an endless problem, so try something different this
time:
- CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on'
but that is simply selected by all of its users
- All the stubs in include/linux/qcom_scm.h can go away
- arm-smccc.h needs to provide a stub for __arm_smccc_smc() to
allow compile-testing QCOM_SCM on all architectures.
- To avoid a circular dependency chain involving RESET_CONTROLLER
and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement.
According to my testing this still builds fine, and the QCOM
platform selects this symbol already.
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Only one single SCMI Virtio device is currently supported by this driver
and it is referenced using a static global variable which is initialized
once for all during probing and nullified at virtio device removal.
Add proper SMP barriers to protect accesses to such device reference to
ensure that the initialzation state of such device is correctly observed by
all PEs at any time.
Return -EBUSY, instead of -EINVAL, and a descriptive error message if more
than one SCMI Virtio device is ever found and probed.
Link: https://lore.kernel.org/r/20210916103336.7243-3-cristian.marussi@arm.com
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Remove unneeded nested irqsave/irqrestore spinlocks.
Add also a few descriptive comments to explain better the system behaviour
at shutdown time.
Link: https://lore.kernel.org/r/20210916103336.7243-2-cristian.marussi@arm.com
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
While reboot the system by sysrq, the following bug will be occur.
BUG: sleeping function called from invalid context at kernel/locking/semaphore.c:90
in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 10052, name: rc.shutdown
CPU: 3 PID: 10052 Comm: rc.shutdown Tainted: G W O 5.10.0 #1
Call trace:
dump_backtrace+0x0/0x1c8
show_stack+0x18/0x28
dump_stack+0xd0/0x110
___might_sleep+0x14c/0x160
__might_sleep+0x74/0x88
down_interruptible+0x40/0x118
virt_efi_reset_system+0x3c/0xd0
efi_reboot+0xd4/0x11c
machine_restart+0x60/0x9c
emergency_restart+0x1c/0x2c
sysrq_handle_reboot+0x1c/0x2c
__handle_sysrq+0xd0/0x194
write_sysrq_trigger+0xbc/0xe4
proc_reg_write+0xd4/0xf0
vfs_write+0xa8/0x148
ksys_write+0x6c/0xd8
__arm64_sys_write+0x18/0x28
el0_svc_common.constprop.3+0xe4/0x16c
do_el0_svc+0x1c/0x2c
el0_svc+0x20/0x30
el0_sync_handler+0x80/0x17c
el0_sync+0x158/0x180
The reason for this problem is that irq has been disabled in
machine_restart() and then it calls down_interruptible() in
virt_efi_reset_system(), which would occur sleep in irq context,
it is dangerous! Commit 99409b935c9a("locking/semaphore: Add
might_sleep() to down_*() family") add might_sleep() in
down_interruptible(), so the bug info is here. down_trylock()
can solve this problem, cause there is no might_sleep.
--------
Cc: <stable@vger.kernel.org>
Signed-off-by: Zhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Joe reports that using a statically allocated buffer for converting CPER
error records into human readable text is probably a bad idea. Even
though we are not aware of any actual issues, a stack buffer is clearly
a better choice here anyway, so let's move the buffer into the stack
frames of the two functions that refer to it.
Cc: <stable@vger.kernel.org>
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The message
"Exiting boot services and installing virtual address map...\n"
is even shown if we have efi=novamap on the command line or the firmware
does not provide EFI_RT_SUPPORTED_SET_VIRTUAL_ADDRESS_MAP.
To avoid confusion just print
"Exiting boot services...\n"
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When arm_ffa firmware driver module is unloaded or removed we call
__ffa_devices_unregister on all the devices on the ffa bus. It must
unregister all the devices instead it is currently just releasing the
devices without unregistering. That is pure wrong as when we try to
load the module back again, it will result in the kernel crash something
like below.
-->8
CPU: 2 PID: 232 Comm: modprobe Not tainted 5.15.0-rc2+ #169
Hardware name: FVP Base RevC (DT)
Call trace:
dump_backtrace+0x0/0x1cc
show_stack+0x18/0x64
dump_stack_lvl+0x64/0x7c
dump_stack+0x18/0x38
sysfs_create_dir_ns+0xe4/0x140
kobject_add_internal+0x170/0x358
kobject_add+0x94/0x100
device_add+0x178/0x5f0
device_register+0x20/0x30
ffa_device_register+0x80/0xcc [ffa_module]
ffa_setup_partitions+0x7c/0x108 [ffa_module]
init_module+0x290/0x2dc [ffa_module]
do_one_initcall+0xbc/0x230
do_init_module+0x58/0x304
load_module+0x15e0/0x1f68
__arm64_sys_finit_module+0xb8/0xf4
invoke_syscall+0x44/0x140
el0_svc_common+0xb4/0xf0
do_el0_svc+0x24/0x80
el0_svc+0x20/0x50
el0t_64_sync_handler+0x84/0xe4
el0t_64_sync+0x1a0/0x1a4
kobject_add_internal failed for arm-ffa-8001 with -EEXIST, don't try to
register things with the same name in the same directory.
----
Fix the issue by calling device_unregister in __ffa_devices_unregister
which will also take care of calling device_release(which is mapped to
ffa_release_device)
Link: https://lore.kernel.org/r/20210924092859.3057562-2-sudeep.holla@arm.com
Fixes: e781858488 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently the arm_ffa firmware driver can be built as module and hence
all the users of FFA driver. If any driver on the ffa bus is removed or
unregistered, the remove callback on all the device bound to the driver
being removed should be callback. For that to happen, we must register
a remove callback on the ffa_bus which is currently missing. This results
in the probe getting called again without the previous remove callback
on a device which may result in kernel crash.
Fix the issue by registering the remove callback on the FFA bus.
Link: https://lore.kernel.org/r/20210924092859.3057562-1-sudeep.holla@arm.com
Fixes: e781858488 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Reported-by: Jens Wiklander <jens.wiklander@linaro.org>
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
In case the command line option "efi=noruntime" is default at built-time, the user
could overwrite its state by `efi=runtime' and allow it again.
This is useful on PREEMPT_RT where "efi=noruntime" is default and the
user might need to alter the boot order for instance.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Based on measurements the EFI functions get_variable /
get_next_variable take up to 2us which looks okay.
The functions get_time, set_time take around 10ms. These 10ms are too
much. Even one ms would be too much.
Ard mentioned that SetVariable might even trigger larger latencies if
the firmware will erase flash blocks on NOR.
The time-functions are used by efi-rtc and can be triggered during
run-time (either via explicit read/write or ntp sync).
The variable write could be used by pstore.
These functions can be disabled without much of a loss. The poweroff /
reboot hooks may be provided by PSCI.
Disable EFI's runtime wrappers on PREEMPT_RT.
This was observed on "EFI v2.60 by SoftIron Overdrive 1000".
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
wm_adsp originally provided firmware loading on some audio DSP and was
implemented as an ASoC codec driver. However, the firmware loading now
covers a wider range of DSP cores and peripherals containing them,
beyond just audio. So it needs to be available to non-audio drivers. All
the core firmware loading support has been moved into a new driver
cs_dsp, leaving only the ASoC-specific parts in wm_adsp.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210913160057.103842-17-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Xilinx ZynqMP firmware MMIO APIs support to set and get PS_MODE
pins value and status. These APIs create an interface path between
mode pin controller driver and low-level API to access GPIO pins.
Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
virtio_scmi_exit() is only called from __exit function, so the annotation
is correct, but when the driver is built-in, the section gets discarded
and the reference from a callback pointer causes a link-time error:
`virtio_scmi_exit' referenced in section `.rodata' of drivers/firmware/arm_scmi/virtio.o:
defined in discarded section `.exit.text' of drivers/firmware/arm_scmi/virtio.o
I could not figure out a better workaround, so let's just remove that
annotation even if it wastes a couple of bytes in .text.
Link: https://lore.kernel.org/r/20210920100301.1466486-2-arnd@kernel.org
Fixes: 46abe13b5e ("firmware: arm_scmi: Add virtio transport")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
ARM_SCMI_TRANSPORT_VIRTIO is a 'bool' Kconfig used to include support for
the SCMI virtio transport inside the core SCMI stack; a bare transport
dependency attached here to this option, though, cannot be properly
propagated to the parent ARM_SCMI_PROTOCOL option and, as a result, it is
currently possible to configure a Kernel where SCMI core is builtin
and includes support for virtio while VirtIO core is =m.
This allowed combination breaks linking:
ARM_SCMI_PROTOCOL=y
ARM_SCMI_TRANSPORT_VIRTIO=y
VIRTIO=m
Bind the dependency in ARM_SCMI_TRANSPORT_VIRTIO to the chosen kind of
compilation of ARM_SCMI_PROTOCOL.
Link: https://lore.kernel.org/r/20210816141609.41751-1-cristian.marussi@arm.com
Fixes: 46abe13b5e ("firmware: arm_scmi: Add virtio transport")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The Qualcomm Secure Channel Manager (SCM) is only present on Qualcomm
SoCs. All drivers using it select QCOM_SCM, and depend on ARCH_QCOM.
Until recently, QCOM_SCM was an invisible symbol, but this was changed
by adding loadable module support, exposing it to all ARM and ARM64
users. Hence add a dependency on ARCH_QCOM, to prevent asking the user
about this driver when configuring a kernel without Qualcomm SoC
support.
While at it, drop the dependency on ARM || ARM64, as that is implied by
HAVE_ARM_SMCCC.
Fixes: b42000e4b8 ("firmware: qcom_scm: Allow qcom_scm driver to be loadable as a permenent module")
Fixes: 2954a6f12f ("firmware: qcom-scm: Fix QCOM_SCM configuration")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/5cda77085c07dc2e8d2195507b287457cb2f09e9.1629807831.git.geert+renesas@glider.be
tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST
(Dmitry Osipenko)
- Fix the error code for the exynos when devm_get_clk() fails (Dan
Carpenter)
- Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar)
- Add support for hardware trip points for the rcar gen3 thermal
driver and store TSC id as unsigned int (Niklas Söderlund)
- Replace the deprecated CPU-hotplug functions get_online_cpus() and
put_online_cpus (Sebastian Andrzej Siewior)
- Add the thermal tools directory in the MAINTAINERS file (Daniel
Lezcano)
- Fix the Makefile and the cross compilation flags for the userspace
'tmon' tool (Rolf Eike Beer)
- Allow to use the IMOK independently from the GDDV on Int340x (Sumeet
Pawnikar)
- Fix the stub thermal_cooling_device_register() function prototype
which does not match the real function (Arnd Bergmann)
- Make the thermal trip point optional in the DT bindings (Maxime
Ripard)
- Fix a typo in a comment in the core code (Geert Uytterhoeven)
- Reduce the verbosity of the trace in the SoC thermal tegra driver
(Dmitry Osipenko)
- Add the support for the LMh (Limit Management hardware) driver on
the QCom platforms (Thara Gopinath)
- Allow processing of HWP interrupt by adding a weak function in the
Intel driver (Srinivas Pandruvada)
- Prevent an abort of the sensor probe is a channel is not used
(Matthias Kaehlcke)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmE7yAcACgkQqDIjiipP
6E8WKwgAmI+kdOURCz1CtCIv6FnQFx20suxZidfATPULBPZ8zcHqdjxJECXJpvDz
y8T8dGAPRqXmMBJm2vF/qVraHaDJvscHXaflhsurhyEp0tiGptNeugBosso0jDEQ
JFrQ6Rny/NCmNMOkWW4YlSfkik0zQ43xlHocy3UfOKfcshhYWGsPTbIXdA6wH/zh
3tFW8j327tkyenrKZiaioJOSX88Oyy7Ft8l5k0HP+hPYkrvihWDJuEfEEmpfkdA7
Q70Lacf2QtFP8mUfGKpQxURSgndjphDPU7tzP5NqqWvLuT94aTspvJx4ywVwK8Iv
o+jNvR33yBIs5FXXB7B1ymkNE1h8uQ==
=blIQ
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Add the tegra3 thermal sensor and fix the compilation testing on
tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST
(Dmitry Osipenko)
- Fix the error code for the exynos when devm_get_clk() fails (Dan
Carpenter)
- Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar)
- Add support for hardware trip points for the rcar gen3 thermal driver
and store TSC id as unsigned int (Niklas Söderlund)
- Replace the deprecated CPU-hotplug functions get_online_cpus() and
put_online_cpus (Sebastian Andrzej Siewior)
- Add the thermal tools directory in the MAINTAINERS file (Daniel
Lezcano)
- Fix the Makefile and the cross compilation flags for the userspace
'tmon' tool (Rolf Eike Beer)
- Allow to use the IMOK independently from the GDDV on Int340x (Sumeet
Pawnikar)
- Fix the stub thermal_cooling_device_register() function prototype
which does not match the real function (Arnd Bergmann)
- Make the thermal trip point optional in the DT bindings (Maxime
Ripard)
- Fix a typo in a comment in the core code (Geert Uytterhoeven)
- Reduce the verbosity of the trace in the SoC thermal tegra driver
(Dmitry Osipenko)
- Add the support for the LMh (Limit Management hardware) driver on the
QCom platforms (Thara Gopinath)
- Allow processing of HWP interrupt by adding a weak function in the
Intel driver (Srinivas Pandruvada)
- Prevent an abort of the sensor probe is a channel is not used
(Matthias Kaehlcke)
* tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not used
thermal/drivers/intel: Allow processing of HWP interrupt
dt-bindings: thermal: Add dt binding for QCOM LMh
thermal/drivers/qcom: Add support for LMh driver
firmware: qcom_scm: Introduce SCM calls to access LMh
thermal/drivers/tegra-soctherm: Silence message about clamped temperature
thermal: Spelling s/scallbacks/callbacks/
dt-bindings: thermal: Make trips node optional
thermal/core: Fix thermal_cooling_device_register() prototype
thermal/drivers/int340x: Use IMOK independently
tools/thermal/tmon: Add cross compiling support
thermal/tools/tmon: Improve the Makefile
MAINTAINERS: Add missing userspace thermal tools to the thermal section
thermal/drivers/intel_powerclamp: Replace deprecated CPU-hotplug functions.
thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int
thermal/drivers/rcar_gen3_thermal: Add support for hardware trip points
drivers/thermal/intel: Add TCC cooling support for AlderLake platform
thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()
thermal/drivers/tegra: Correct compile-testing of drivers
thermal/drivers/tegra: Add driver for Tegra30 thermal sensor
Pull dmi fix from Jean Delvare.
Unbreak some existing udev/hwdb modalias matches due to misplaced
product_sku field.
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware: dmi: Move product_sku info to the end of the modalias
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmExXHoVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGAZwP/iHdEZzuQ4cz2uXUaV0fevj9jjPU
zJ8wrrNabAiT6f5x861DsARQSR4OSt3zN0tyBNgZwUdotbe7ED5GegrgIUBMWlML
QskhTEIZj7TexAX/20vx671gtzI3JzFg4c9BuriXCFRBvychSevdJPr65gMDOesL
vOJnXe+SGXG2+fPWi/PxrcOItNRcveqo2GiWHT3g0Cv/DJUulu81gEkz3hrufnMR
cjMeSkV0nJJcvI755OQBOUnEuigW64k4m2WxHPG24tU8cQOCqV6lqwOfNQBAn4+F
OoaCMyPQT9gvGYwGExQMCXGg0wbUt1qnxzOVoA2qFCwbo+MFhqjBvPXab6VJm7CE
mY3RrTtvxSqBdHI6EGcYeLjhycK9b+LLoJ1qc3S9FK8It6NoFFp4XV0R6ItPBls7
mWi9VSpyI6k0AwLq+bGXEHvaX/bnnf/vfqn8H+w6mRZdXjFV8EB2DiOSRX/OqjVG
RnvTtXzWWThLyXvWR3Jox4+7X6728oL7akLemoeZI6oTbJDm7dQgwpz5HbSyHXLh
d+gUF3Y/6lqxT5N9GSVDxpD1bEMh2I7nGQ4M7WGbGas/3yUemF8wbBqGQo4a+YeD
d9vGAUxDp2PQTtL2sjFo5Gd4PZEM9g7vwWzRvHe0o5NxKEXcBg25b8cD1hxrN9Y4
Y1AAnc0kLO+My3PC
=lw3M
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kbuild: redo fake deps at include/ksym/*.h
kbuild: clean up objtool_args slightly
modpost: get the *.mod file path more simply
checkkconfigsymbols.py: Fix the '--ignore' option
kbuild: merge vmlinux_link() between ARCH=um and other architectures
kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
kbuild: remove stale *.symversions
kbuild: remove unused quiet_cmd_update_lto_symversions
gen_compile_commands: extract compiler command from a series of commands
x86: remove cc-option-yn test for -mtune=
arc: replace cc-option-yn uses with cc-option
s390: replace cc-option-yn uses with cc-option
ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
sparc: move the install rule to arch/sparc/Makefile
security: remove unneeded subdir-$(CONFIG_...)
kbuild: sh: remove unused install script
kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
kbuild: Switch to 'f' variants of integrated assembler flag
kbuild: Shuffle blank line to improve comment meaning
...
The isa_bus_to_virt is only needed under X86 and in fact the code
that sets the ibft_phys_addr is only compiled under X86.
As such lets just ifdef the code.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Vijayendra Suman <vijayendra.suman@oracle.com>
CC: Maurizio Lombardi <mlombard@redhat.com>
CC: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
v2: Remove the ibft_phys_addr as it is defined in iscsi_ibft.h
Linus Torvalds