Commit Graph

78 Commits

Author SHA1 Message Date
Miklos Szeredi 7c03e2cda4 vfs: move cap_convert_nscap() call into vfs_setxattr()
cap_convert_nscap() does permission checking as well as conversion of the
xattr value conditionally based on fs's user-ns.

This is needed by overlayfs and probably other layered fs (ecryptfs) and is
what vfs_foo() is supposed to do anyway.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
2020-12-14 15:26:13 +01:00
Adrian Reber 124ea650d3 capabilities: Introduce CAP_CHECKPOINT_RESTORE
This patch introduces CAP_CHECKPOINT_RESTORE, a new capability facilitating
checkpoint/restore for non-root users.

Over the last years, The CRIU (Checkpoint/Restore In Userspace) team has
been asked numerous times if it is possible to checkpoint/restore a
process as non-root. The answer usually was: 'almost'.

The main blocker to restore a process as non-root was to control the PID
of the restored process. This feature available via the clone3 system
call, or via /proc/sys/kernel/ns_last_pid is unfortunately guarded by
CAP_SYS_ADMIN.

In the past two years, requests for non-root checkpoint/restore have
increased due to the following use cases:
* Checkpoint/Restore in an HPC environment in combination with a
  resource manager distributing jobs where users are always running as
  non-root. There is a desire to provide a way to checkpoint and
  restore long running jobs.
* Container migration as non-root
* We have been in contact with JVM developers who are integrating
  CRIU into a Java VM to decrease the startup time. These
  checkpoint/restore applications are not meant to be running with
  CAP_SYS_ADMIN.

We have seen the following workarounds:
* Use a setuid wrapper around CRIU:
  See https://github.com/FredHutch/slurm-examples/blob/master/checkpointer/lib/checkpointer/checkpointer-suid.c
* Use a setuid helper that writes to ns_last_pid.
  Unfortunately, this helper delegation technique is impossible to use
  with clone3, and is thus prone to races.
  See https://github.com/twosigma/set_ns_last_pid
* Cycle through PIDs with fork() until the desired PID is reached:
  This has been demonstrated to work with cycling rates of 100,000 PIDs/s
  See https://github.com/twosigma/set_ns_last_pid
* Patch out the CAP_SYS_ADMIN check from the kernel
* Run the desired application in a new user and PID namespace to provide
  a local CAP_SYS_ADMIN for controlling PIDs. This technique has limited
  use in typical container environments (e.g., Kubernetes) as /proc is
  typically protected with read-only layers (e.g., /proc/sys) for
  hardening purposes. Read-only layers prevent additional /proc mounts
  (due to proc's SB_I_USERNS_VISIBLE property), making the use of new
  PID namespaces limited as certain applications need access to /proc
  matching their PID namespace.

The introduced capability allows to:
* Control PIDs when the current user is CAP_CHECKPOINT_RESTORE capable
  for the corresponding PID namespace via ns_last_pid/clone3.
* Open files in /proc/pid/map_files when the current user is
  CAP_CHECKPOINT_RESTORE capable in the root namespace, useful for
  recovering files that are unreachable via the file system such as
  deleted files, or memfd files.

See corresponding selftest for an example with clone3().

Signed-off-by: Adrian Reber <areber@redhat.com>
Signed-off-by: Nicolas Viennot <Nicolas.Viennot@twosigma.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20200719100418.2112740-2-areber@redhat.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-07-19 20:14:42 +02:00
Alexei Starovoitov a17b53c4a4 bpf, capability: Introduce CAP_BPF
Split BPF operations that are allowed under CAP_SYS_ADMIN into
combination of CAP_BPF, CAP_PERFMON, CAP_NET_ADMIN.
For backward compatibility include them in CAP_SYS_ADMIN as well.

The end result provides simple safety model for applications that use BPF:
- to load tracing program types
  BPF_PROG_TYPE_{KPROBE, TRACEPOINT, PERF_EVENT, RAW_TRACEPOINT, etc}
  use CAP_BPF and CAP_PERFMON
- to load networking program types
  BPF_PROG_TYPE_{SCHED_CLS, XDP, SK_SKB, etc}
  use CAP_BPF and CAP_NET_ADMIN

There are few exceptions from this rule:
- bpf_trace_printk() is allowed in networking programs, but it's using
  tracing mechanism, hence this helper needs additional CAP_PERFMON
  if networking program is using this helper.
- BPF_F_ZERO_SEED flag for hash/lru map is allowed under CAP_SYS_ADMIN only
  to discourage production use.
- BPF HW offload is allowed under CAP_SYS_ADMIN.
- bpf_probe_write_user() is allowed under CAP_SYS_ADMIN only.

CAPs are not checked at attach/detach time with two exceptions:
- loading BPF_PROG_TYPE_CGROUP_SKB is allowed for unprivileged users,
  hence CAP_NET_ADMIN is required at attach time.
- flow_dissector detach doesn't check prog FD at detach,
  hence CAP_NET_ADMIN is required at detach time.

CAP_SYS_ADMIN is required to iterate BPF objects (progs, maps, links) via get_next_id
command and convert them to file descriptor via GET_FD_BY_ID command.
This restriction guarantees that mutliple tasks with CAP_BPF are not able to
affect each other. That leads to clean isolation of tasks. For example:
task A with CAP_BPF and CAP_NET_ADMIN loads and attaches a firewall via bpf_link.
task B with the same capabilities cannot detach that firewall unless
task A explicitly passed link FD to task B via scm_rights or bpffs.
CAP_SYS_ADMIN can still detach/unload everything.

Two networking user apps with CAP_SYS_ADMIN and CAP_NET_ADMIN can
accidentely mess with each other programs and maps.
Two networking user apps with CAP_NET_ADMIN and CAP_BPF cannot affect each other.

CAP_NET_ADMIN + CAP_BPF allows networking programs access only packet data.
Such networking progs cannot access arbitrary kernel memory or leak pointers.

bpftool, bpftrace, bcc tools binaries should NOT be installed with
CAP_BPF and CAP_PERFMON, since unpriv users will be able to read kernel secrets.
But users with these two permissions will be able to use these tracing tools.

CAP_PERFMON is least secure, since it allows kprobes and kernel memory access.
CAP_NET_ADMIN can stop network traffic via iproute2.
CAP_BPF is the safest from security point of view and harmless on its own.

Having CAP_BPF and/or CAP_NET_ADMIN is not enough to write into arbitrary map
and if that map is used by firewall-like bpf prog.
CAP_BPF allows many bpf prog_load commands in parallel. The verifier
may consume large amount of memory and significantly slow down the system.

Existing unprivileged BPF operations are not affected.
In particular unprivileged users are allowed to load socket_filter and cg_skb
program types and to create array, hash, prog_array, map-in-map map types.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200513230355.7858-2-alexei.starovoitov@gmail.com
2020-05-15 17:29:41 +02:00
Alexey Budankov 9807372822 capabilities: Introduce CAP_PERFMON to kernel and user space
Introduce the CAP_PERFMON capability designed to secure system
performance monitoring and observability operations so that CAP_PERFMON
can assist CAP_SYS_ADMIN capability in its governing role for
performance monitoring and observability subsystems.

CAP_PERFMON hardens system security and integrity during performance
monitoring and observability operations by decreasing attack surface that
is available to a CAP_SYS_ADMIN privileged process [2]. Providing the access
to system performance monitoring and observability operations under CAP_PERFMON
capability singly, without the rest of CAP_SYS_ADMIN credentials, excludes
chances to misuse the credentials and makes the operation more secure.

Thus, CAP_PERFMON implements the principle of least privilege for
performance monitoring and observability operations (POSIX IEEE 1003.1e:
2.2.2.39 principle of least privilege: A security design principle that
  states that a process or program be granted only those privileges
(e.g., capabilities) necessary to accomplish its legitimate function,
and only for the time that such privileges are actually required)

CAP_PERFMON meets the demand to secure system performance monitoring and
observability operations for adoption in security sensitive, restricted,
multiuser production environments (e.g. HPC clusters, cloud and virtual compute
environments), where root or CAP_SYS_ADMIN credentials are not available to
mass users of a system, and securely unblocks applicability and scalability
of system performance monitoring and observability operations beyond root
and CAP_SYS_ADMIN use cases.

CAP_PERFMON takes over CAP_SYS_ADMIN credentials related to system performance
monitoring and observability operations and balances amount of CAP_SYS_ADMIN
credentials following the recommendations in the capabilities man page [1]
for CAP_SYS_ADMIN: "Note: this capability is overloaded; see Notes to kernel
developers, below." For backward compatibility reasons access to system
performance monitoring and observability subsystems of the kernel remains
open for CAP_SYS_ADMIN privileged processes but CAP_SYS_ADMIN capability
usage for secure system performance monitoring and observability operations
is discouraged with respect to the designed CAP_PERFMON capability.

Although the software running under CAP_PERFMON can not ensure avoidance
of related hardware issues, the software can still mitigate these issues
following the official hardware issues mitigation procedure [2]. The bugs
in the software itself can be fixed following the standard kernel development
process [3] to maintain and harden security of system performance monitoring
and observability operations.

[1] http://man7.org/linux/man-pages/man7/capabilities.7.html
[2] https://www.kernel.org/doc/html/latest/process/embargoed-hardware-issues.html
[3] https://www.kernel.org/doc/html/latest/admin-guide/security-bugs.html

Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Serge E. Hallyn <serge@hallyn.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-doc@vger.kernel.org
Cc: linux-man@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: selinux@vger.kernel.org
Link: http://lore.kernel.org/lkml/5590d543-82c6-490a-6544-08e6a5517db0@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-16 12:19:06 -03:00
Linus Torvalds be37f21a08 audit/stable-5.1 PR 20190305
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAlx+8ZgUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXOlDhAAiGlirQ9syyG2fYzaARZZ2QoU/GGD
 PSAeiNmP3jvJzXArCvugRCw+YSNDdQOBM3SrLQC+cM0MAIDRYXN0NdcrsbTchlMA
 51Fx1egZ9Fyj+Ehgida3muh2lRUy7DQwMCL6tAVqwz7vYkSTGDUf+MlYqOqXDka5
 74pEExOS3Jdi7560BsE8b6QoW9JIJqEJnirXGkG9o2qC0oFHCR6PKxIyQ7TJrLR1
 F23aFTqLTH1nbPUQjnox2PTf13iQVh4j2gwzd+9c9KBfxoGSge3dmxId7BJHy2aG
 M27fPdCYTNZAGWpPVujsCPAh1WPQ9NQqg3mA9+g14PEbiLqPcqU+kWmnDU7T7bEw
 Qx0kt6Y8GiknwCqq8pDbKYclgRmOjSGdfutzd0z8uDpbaeunS4/NqnDb/FUaDVcr
 jA4d6ep7qEgHpYbL8KgOeZCexfaTfz6mcwRWNq3Uu9cLZbZqSSQ7PXolMADHvoRs
 LS7VH2jcP7q4p4GWmdfjv67xyUUo9HG5HHX74h5pLfQSYXiBWo4ht0UOAzX/6EcE
 CJNHAFHv+OanI5Rg/6JQ8b3/bJYxzAJVyLZpCuMtlKk6lYBGNeADk9BezEDIYsm8
 tSe4/GqqyR9+Qz8rSdpAZ0KKkfqS535IcHUPUJau7Bzg1xqSEP5gzZN6QsjdXg0+
 5wFFfdFICTfJFXo=
 =57/1
 -----END PGP SIGNATURE-----

Merge tag 'audit-pr-20190305' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit

Pull audit updates from Paul Moore:
 "A lucky 13 audit patches for v5.1.

  Despite the rather large diffstat, most of the changes are from two
  bug fix patches that move code from one Kconfig option to another.

  Beyond that bit of churn, the remaining changes are largely cleanups
  and bug-fixes as we slowly march towards container auditing. It isn't
  all boring though, we do have a couple of new things: file
  capabilities v3 support, and expanded support for filtering on
  filesystems to solve problems with remote filesystems.

  All changes pass the audit-testsuite.  Please merge for v5.1"

* tag 'audit-pr-20190305' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: mark expected switch fall-through
  audit: hide auditsc_get_stamp and audit_serial prototypes
  audit: join tty records to their syscall
  audit: remove audit_context when CONFIG_ AUDIT and not AUDITSYSCALL
  audit: remove unused actx param from audit_rule_match
  audit: ignore fcaps on umount
  audit: clean up AUDITSYSCALL prototypes and stubs
  audit: more filter PATH records keyed on filesystem magic
  audit: add support for fcaps v3
  audit: move loginuid and sessionid from CONFIG_AUDITSYSCALL to CONFIG_AUDIT
  audit: add syscall information to CONFIG_CHANGE records
  audit: hand taken context to audit_kill_trees for syscall logging
  audit: give a clue what CONFIG_CHANGE op was involved
2019-03-07 12:20:11 -08:00
Micah Morton 40852275a9 LSM: add SafeSetID module that gates setid calls
This change ensures that the set*uid family of syscalls in kernel/sys.c
(setreuid, setuid, setresuid, setfsuid) all call ns_capable_common with
the CAP_OPT_INSETID flag, so capability checks in the security_capable
hook can know whether they are being called from within a set*uid
syscall. This change is a no-op by itself, but is needed for the
proposed SafeSetID LSM.

Signed-off-by: Micah Morton <mortonm@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
2019-01-25 11:22:43 -08:00
Richard Guy Briggs 2fec30e245 audit: add support for fcaps v3
V3 namespaced file capabilities were introduced in
commit 8db6c34f1d ("Introduce v3 namespaced file capabilities")

Add support for these by adding the "frootid" field to the existing
fcaps fields in the NAME and BPRM_FCAPS records.

Please see github issue
https://github.com/linux-audit/audit-kernel/issues/103

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
[PM: comment tweak to fit an 80 char line width]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-01-25 13:31:23 -05:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Serge E. Hallyn 8db6c34f1d Introduce v3 namespaced file capabilities
Root in a non-initial user ns cannot be trusted to write a traditional
security.capability xattr.  If it were allowed to do so, then any
unprivileged user on the host could map his own uid to root in a private
namespace, write the xattr, and execute the file with privilege on the
host.

However supporting file capabilities in a user namespace is very
desirable.  Not doing so means that any programs designed to run with
limited privilege must continue to support other methods of gaining and
dropping privilege.  For instance a program installer must detect
whether file capabilities can be assigned, and assign them if so but set
setuid-root otherwise.  The program in turn must know how to drop
partial capabilities, and do so only if setuid-root.

This patch introduces v3 of the security.capability xattr.  It builds a
vfs_ns_cap_data struct by appending a uid_t rootid to struct
vfs_cap_data.  This is the absolute uid_t (that is, the uid_t in user
namespace which mounted the filesystem, usually init_user_ns) of the
root id in whose namespaces the file capabilities may take effect.

When a task asks to write a v2 security.capability xattr, if it is
privileged with respect to the userns which mounted the filesystem, then
nothing should change.  Otherwise, the kernel will transparently rewrite
the xattr as a v3 with the appropriate rootid.  This is done during the
execution of setxattr() to catch user-space-initiated capability writes.
Subsequently, any task executing the file which has the noted kuid as
its root uid, or which is in a descendent user_ns of such a user_ns,
will run the file with capabilities.

Similarly when asking to read file capabilities, a v3 capability will
be presented as v2 if it applies to the caller's namespace.

If a task writes a v3 security.capability, then it can provide a uid for
the xattr so long as the uid is valid in its own user namespace, and it
is privileged with CAP_SETFCAP over its namespace.  The kernel will
translate that rootid to an absolute uid, and write that to disk.  After
this, a task in the writer's namespace will not be able to use those
capabilities (unless rootid was 0), but a task in a namespace where the
given uid is root will.

Only a single security.capability xattr may exist at a time for a given
file.  A task may overwrite an existing xattr so long as it is
privileged over the inode.  Note this is a departure from previous
semantics, which required privilege to remove a security.capability
xattr.  This check can be re-added if deemed useful.

This allows a simple setxattr to work, allows tar/untar to work, and
allows us to tar in one namespace and untar in another while preserving
the capability, without risking leaking privilege into a parent
namespace.

Example using tar:

 $ cp /bin/sleep sleepx
 $ mkdir b1 b2
 $ lxc-usernsexec -m b:0:100000:1 -m b:1:$(id -u):1 -- chown 0:0 b1
 $ lxc-usernsexec -m b:0:100001:1 -m b:1:$(id -u):1 -- chown 0:0 b2
 $ lxc-usernsexec -m b:0:100000:1000 -- tar --xattrs-include=security.capability --xattrs -cf b1/sleepx.tar sleepx
 $ lxc-usernsexec -m b:0:100001:1000 -- tar --xattrs-include=security.capability --xattrs -C b2 -xf b1/sleepx.tar
 $ lxc-usernsexec -m b:0:100001:1000 -- getcap b2/sleepx
   b2/sleepx = cap_sys_admin+ep
 # /opt/ltp/testcases/bin/getv3xattr b2/sleepx
   v3 xattr, rootid is 100001

A patch to linux-test-project adding a new set of tests for this
functionality is in the nsfscaps branch at github.com/hallyn/ltp

Changelog:
   Nov 02 2016: fix invalid check at refuse_fcap_overwrite()
   Nov 07 2016: convert rootid from and to fs user_ns
   (From ebiederm: mar 28 2017)
     commoncap.c: fix typos - s/v4/v3
     get_vfs_caps_from_disk: clarify the fs_ns root access check
     nsfscaps: change the code split for cap_inode_setxattr()
   Apr 09 2017:
       don't return v3 cap for caps owned by current root.
      return a v2 cap for a true v2 cap in non-init ns
   Apr 18 2017:
      . Change the flow of fscap writing to support s_user_ns writing.
      . Remove refuse_fcap_overwrite().  The value of the previous
        xattr doesn't matter.
   Apr 24 2017:
      . incorporate Eric's incremental diff
      . move cap_convert_nscap to setxattr and simplify its usage
   May 8, 2017:
      . fix leaking dentry refcount in cap_inode_getsecurity

Signed-off-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2017-09-01 14:57:15 -05:00
Eric W. Biederman f84df2a6f2 exec: Ensure mm->user_ns contains the execed files
When the user namespace support was merged the need to prevent
ptrace from revealing the contents of an unreadable executable
was overlooked.

Correct this oversight by ensuring that the executed file
or files are in mm->user_ns, by adjusting mm->user_ns.

Use the new function privileged_wrt_inode_uidgid to see if
the executable is a member of the user namespace, and as such
if having CAP_SYS_PTRACE in the user namespace should allow
tracing the executable.  If not update mm->user_ns to
the parent user namespace until an appropriate parent is found.

Cc: stable@vger.kernel.org
Reported-by: Jann Horn <jann@thejh.net>
Fixes: 9e4a36ece6 ("userns: Fail exec for suid and sgid binaries with ids outside our user namespace.")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-11-22 13:21:00 -06:00
Eric W. Biederman 64b875f7ac ptrace: Capture the ptracer's creds not PT_PTRACE_CAP
When the flag PT_PTRACE_CAP was added the PTRACE_TRACEME path was
overlooked.  This can result in incorrect behavior when an application
like strace traces an exec of a setuid executable.

Further PT_PTRACE_CAP does not have enough information for making good
security decisions as it does not report which user namespace the
capability is in.  This has already allowed one mistake through
insufficient granulariy.

I found this issue when I was testing another corner case of exec and
discovered that I could not get strace to set PT_PTRACE_CAP even when
running strace as root with a full set of caps.

This change fixes the above issue with strace allowing stracing as
root a setuid executable without disabling setuid.  More fundamentaly
this change allows what is allowable at all times, by using the correct
information in it's decision.

Cc: stable@vger.kernel.org
Fixes: 4214e42f96d4 ("v2.4.9.11 -> v2.4.9.12")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-11-22 11:49:49 -06:00
Alexey Dobriyan db3f600124 uapi: move forward declarations of internal structures
Don't user forward declarations of internal kernel structures in headers
exported to userspace.

Move "struct completion;".
Move "struct task_struct;".

Link: http://lkml.kernel.org/r/20160713215808.GA22486@p183.telecom.by
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02 17:31:41 -04:00
Tyler Hicks 98f368e9e2 kernel: Add noaudit variant of ns_capable()
When checking the current cred for a capability in a specific user
namespace, it isn't always desirable to have the LSMs audit the check.
This patch adds a noaudit variant of ns_capable() for when those
situations arise.

The common logic between ns_capable() and the new ns_capable_noaudit()
is moved into a single, shared function to keep duplicated code to a
minimum and ease maintainability.

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-06-06 20:16:18 +10:00
Arnd Bergmann 0335695dfa cred/userns: define current_user_ns() as a function
The current_user_ns() macro currently returns &init_user_ns when user
namespaces are disabled, and that causes several warnings when building
with gcc-6.0 in code that compares the result of the macro to
&init_user_ns itself:

  fs/xfs/xfs_ioctl.c: In function 'xfs_ioctl_setattr_check_projid':
  fs/xfs/xfs_ioctl.c:1249:22: error: self-comparison always evaluates to true [-Werror=tautological-compare]
    if (current_user_ns() == &init_user_ns)

This is a legitimate warning in principle, but here it isn't really
helpful, so I'm reprasing the definition in a way that shuts up the
warning.  Apparently gcc only warns when comparing identical literals,
but it can figure out that the result of an inline function can be
identical to a constant expression in order to optimize a condition yet
not warn about the fact that the condition is known at compile time.
This is exactly what we want here, and it looks reasonable because we
generally prefer inline functions over macros anyway.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Yaowei Bai e42852bf88 security/capability.h: cap_issubset/isclear can be boolean
This patch makes cap_issubset/isclear return bool due to these
functions only using either one or zero as their return
value.

No functional change.

Signed-off-by: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2015-11-18 11:20:40 +11:00
Yaowei Bai f70be6dac6 security: remove unused cap_is_fs_cap function
Since commit 3bc1fa8a ("LSM: remove BSD secure level security module")
there is no user of cap_is_fs_cap any more, so remove it.

Signed-off-by: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2015-11-18 11:20:38 +11:00
Iulia Manda 2813893f8b kernel: conditionally support non-root users, groups and capabilities
There are a lot of embedded systems that run most or all of their
functionality in init, running as root:root.  For these systems,
supporting multiple users is not necessary.

This patch adds a new symbol, CONFIG_MULTIUSER, that makes support for
non-root users, non-root groups, and capabilities optional.  It is enabled
under CONFIG_EXPERT menu.

When this symbol is not defined, UID and GID are zero in any possible case
and processes always have all capabilities.

The following syscalls are compiled out: setuid, setregid, setgid,
setreuid, setresuid, getresuid, setresgid, getresgid, setgroups,
getgroups, setfsuid, setfsgid, capget, capset.

Also, groups.c is compiled out completely.

In kernel/capability.c, capable function was moved in order to avoid
adding two ifdef blocks.

This change saves about 25 KB on a defconfig build.  The most minimal
kernels have total text sizes in the high hundreds of kB rather than
low MB.  (The 25k goes down a bit with allnoconfig, but not that much.

The kernel was booted in Qemu.  All the common functionalities work.
Adding users/groups is not possible, failing with -ENOSYS.

Bloat-o-meter output:
add/remove: 7/87 grow/shrink: 19/397 up/down: 1675/-26325 (-24650)

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Iulia Manda <iulia.manda21@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:22 -07:00
Eric Paris 7d8b6c6375 CAPABILITIES: remove undefined caps from all processes
This is effectively a revert of 7b9a7ec565
plus fixing it a different way...

We found, when trying to run an application from an application which
had dropped privs that the kernel does security checks on undefined
capability bits.  This was ESPECIALLY difficult to debug as those
undefined bits are hidden from /proc/$PID/status.

Consider a root application which drops all capabilities from ALL 4
capability sets.  We assume, since the application is going to set
eff/perm/inh from an array that it will clear not only the defined caps
less than CAP_LAST_CAP, but also the higher 28ish bits which are
undefined future capabilities.

The BSET gets cleared differently.  Instead it is cleared one bit at a
time.  The problem here is that in security/commoncap.c::cap_task_prctl()
we actually check the validity of a capability being read.  So any task
which attempts to 'read all things set in bset' followed by 'unset all
things set in bset' will not even attempt to unset the undefined bits
higher than CAP_LAST_CAP.

So the 'parent' will look something like:
CapInh:	0000000000000000
CapPrm:	0000000000000000
CapEff:	0000000000000000
CapBnd:	ffffffc000000000

All of this 'should' be fine.  Given that these are undefined bits that
aren't supposed to have anything to do with permissions.  But they do...

So lets now consider a task which cleared the eff/perm/inh completely
and cleared all of the valid caps in the bset (but not the invalid caps
it couldn't read out of the kernel).  We know that this is exactly what
the libcap-ng library does and what the go capabilities library does.
They both leave you in that above situation if you try to clear all of
you capapabilities from all 4 sets.  If that root task calls execve()
the child task will pick up all caps not blocked by the bset.  The bset
however does not block bits higher than CAP_LAST_CAP.  So now the child
task has bits in eff which are not in the parent.  These are
'meaningless' undefined bits, but still bits which the parent doesn't
have.

The problem is now in cred_cap_issubset() (or any operation which does a
subset test) as the child, while a subset for valid cap bits, is not a
subset for invalid cap bits!  So now we set durring commit creds that
the child is not dumpable.  Given it is 'more priv' than its parent.  It
also means the parent cannot ptrace the child and other stupidity.

The solution here:
1) stop hiding capability bits in status
	This makes debugging easier!

2) stop giving any task undefined capability bits.  it's simple, it you
don't put those invalid bits in CAP_FULL_SET you won't get them in init
and you won't get them in any other task either.
	This fixes the cap_issubset() tests and resulting fallout (which
	made the init task in a docker container untraceable among other
	things)

3) mask out undefined bits when sys_capset() is called as it might use
~0, ~0 to denote 'all capabilities' for backward/forward compatibility.
	This lets 'capsh --caps="all=eip" -- -c /bin/bash' run.

4) mask out undefined bit when we read a file capability off of disk as
again likely all bits are set in the xattr for forward/backward
compatibility.
	This lets 'setcap all+pe /bin/bash; /bin/bash' run

Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Andrew G. Morgan <morgan@kernel.org>
Cc: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Steve Grubb <sgrubb@redhat.com>
Cc: Dan Walsh <dwalsh@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Morris <james.l.morris@oracle.com>
2014-07-24 21:53:47 +10:00
Andy Lutomirski 23adbe12ef fs,userns: Change inode_capable to capable_wrt_inode_uidgid
The kernel has no concept of capabilities with respect to inodes; inodes
exist independently of namespaces.  For example, inode_capable(inode,
CAP_LINUX_IMMUTABLE) would be nonsense.

This patch changes inode_capable to check for uid and gid mappings and
renames it to capable_wrt_inode_uidgid, which should make it more
obvious what it does.

Fixes CVE-2014-4014.

Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10 13:57:22 -07:00
Eric W. Biederman c7b96acf14 userns: Kill nsown_capable it makes the wrong thing easy
nsown_capable is a special case of ns_capable essentially for just CAP_SETUID and
CAP_SETGID.  For the existing users it doesn't noticably simplify things and
from the suggested patches I have seen it encourages people to do the wrong
thing.  So remove nsown_capable.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-08-30 23:44:11 -07:00
Linus Torvalds 935d8aabd4 Add file_ns_capable() helper function for open-time capability checking
Nothing is using it yet, but this will allow us to delay the open-time
checks to use time, without breaking the normal UNIX permission
semantics where permissions are determined by the opener (and the file
descriptor can then be passed to a different process, or the process can
drop capabilities).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-14 10:06:31 -07:00
David Howells 607ca46e97 UAPI: (Scripted) Disintegrate include/linux
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-10-13 10:46:48 +01:00
Michael Kerrisk d9914cf661 PM: Rename CAP_EPOLLWAKEUP to CAP_BLOCK_SUSPEND
As discussed in
http://thread.gmane.org/gmane.linux.kernel/1249726/focus=1288990,
the capability introduced in 4d7e30d989
to govern EPOLLWAKEUP seems misnamed: this capability is about governing
the ability to suspend the system, not using a particular API flag
(EPOLLWAKEUP). We should make the name of the capability more general
to encourage reuse in related cases. (Whether or not this capability
should also be used to govern the use of /sys/power/wake_lock is a
question that needs to be separately resolved.)

This patch renames the capability to CAP_BLOCK_SUSPEND. In order to ensure
that the old capability name doesn't make it out into the wild, could you
please apply and push up the tree to ensure that it is incorporated
for the 3.5 release.

Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-17 21:37:27 +02:00
Linus Torvalds 644473e9c6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace enhancements from Eric Biederman:
 "This is a course correction for the user namespace, so that we can
  reach an inexpensive, maintainable, and reasonably complete
  implementation.

  Highlights:
   - Config guards make it impossible to enable the user namespace and
     code that has not been converted to be user namespace safe.

   - Use of the new kuid_t type ensures the if you somehow get past the
     config guards the kernel will encounter type errors if you enable
     user namespaces and attempt to compile in code whose permission
     checks have not been updated to be user namespace safe.

   - All uids from child user namespaces are mapped into the initial
     user namespace before they are processed.  Removing the need to add
     an additional check to see if the user namespace of the compared
     uids remains the same.

   - With the user namespaces compiled out the performance is as good or
     better than it is today.

   - For most operations absolutely nothing changes performance or
     operationally with the user namespace enabled.

   - The worst case performance I could come up with was timing 1
     billion cache cold stat operations with the user namespace code
     enabled.  This went from 156s to 164s on my laptop (or 156ns to
     164ns per stat operation).

   - (uid_t)-1 and (gid_t)-1 are reserved as an internal error value.
     Most uid/gid setting system calls treat these value specially
     anyway so attempting to use -1 as a uid would likely cause
     entertaining failures in userspace.

   - If setuid is called with a uid that can not be mapped setuid fails.
     I have looked at sendmail, login, ssh and every other program I
     could think of that would call setuid and they all check for and
     handle the case where setuid fails.

   - If stat or a similar system call is called from a context in which
     we can not map a uid we lie and return overflowuid.  The LFS
     experience suggests not lying and returning an error code might be
     better, but the historical precedent with uids is different and I
     can not think of anything that would break by lying about a uid we
     can't map.

   - Capabilities are localized to the current user namespace making it
     safe to give the initial user in a user namespace all capabilities.

  My git tree covers all of the modifications needed to convert the core
  kernel and enough changes to make a system bootable to runlevel 1."

Fix up trivial conflicts due to nearby independent changes in fs/stat.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
  userns:  Silence silly gcc warning.
  cred: use correct cred accessor with regards to rcu read lock
  userns: Convert the move_pages, and migrate_pages permission checks to use uid_eq
  userns: Convert cgroup permission checks to use uid_eq
  userns: Convert tmpfs to use kuid and kgid where appropriate
  userns: Convert sysfs to use kgid/kuid where appropriate
  userns: Convert sysctl permission checks to use kuid and kgids.
  userns: Convert proc to use kuid/kgid where appropriate
  userns: Convert ext4 to user kuid/kgid where appropriate
  userns: Convert ext3 to use kuid/kgid where appropriate
  userns: Convert ext2 to use kuid/kgid where appropriate.
  userns: Convert devpts to use kuid/kgid where appropriate
  userns: Convert binary formats to use kuid/kgid where appropriate
  userns: Add negative depends on entries to avoid building code that is userns unsafe
  userns: signal remove unnecessary map_cred_ns
  userns: Teach inode_capable to understand inodes whose uids map to other namespaces.
  userns: Fail exec for suid and sgid binaries with ids outside our user namespace.
  userns: Convert stat to return values mapped from kuids and kgids
  userns: Convert user specfied uids and gids in chown into kuids and kgid
  userns: Use uid_eq gid_eq helpers when comparing kuids and kgids in the vfs
  ...
2012-05-23 17:42:39 -07:00
Arve Hjønnevåg 4d7e30d989 epoll: Add a flag, EPOLLWAKEUP, to prevent suspend while epoll events are ready
When an epoll_event, that has the EPOLLWAKEUP flag set, is ready, a
wakeup_source will be active to prevent suspend. This can be used to
handle wakeup events from a driver that support poll, e.g. input, if
that driver wakes up the waitqueue passed to epoll before allowing
suspend.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-05 21:50:41 +02:00
Eric W. Biederman 1a48e2ac03 userns: Replace the hard to write inode_userns with inode_capable.
This represents a change in strategy of how to handle user namespaces.
Instead of tagging everything explicitly with a user namespace and bulking
up all of the comparisons of uids and gids in the kernel,  all uids and gids
in use will have a mapping to a flat kuid and kgid spaces respectively.  This
allows much more of the existing logic to be preserved and in general
allows for faster code.

In this new and improved world we allow someone to utiliize capabilities
over an inode if the inodes owner mapps into the capabilities holders user
namespace and the user has capabilities in their user namespace.  Which
is simple and efficient.

Moving the fs uid comparisons to be comparisons in a flat kuid space
follows in later patches, something that is only significant if you
are using user namespaces.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-04-07 17:02:46 -07:00
Linus Torvalds c49c41a413 Merge branch 'for-linus' of git://selinuxproject.org/~jmorris/linux-security
* 'for-linus' of git://selinuxproject.org/~jmorris/linux-security:
  capabilities: remove __cap_full_set definition
  security: remove the security_netlink_recv hook as it is equivalent to capable()
  ptrace: do not audit capability check when outputing /proc/pid/stat
  capabilities: remove task_ns_* functions
  capabitlies: ns_capable can use the cap helpers rather than lsm call
  capabilities: style only - move capable below ns_capable
  capabilites: introduce new has_ns_capabilities_noaudit
  capabilities: call has_ns_capability from has_capability
  capabilities: remove all _real_ interfaces
  capabilities: introduce security_capable_noaudit
  capabilities: reverse arguments to security_capable
  capabilities: remove the task from capable LSM hook entirely
  selinux: sparse fix: fix several warnings in the security server cod
  selinux: sparse fix: fix warnings in netlink code
  selinux: sparse fix: eliminate warnings for selinuxfs
  selinux: sparse fix: declare selinux_disable() in security.h
  selinux: sparse fix: move selinux_complete_init
  selinux: sparse fix: make selinux_secmark_refcount static
  SELinux: Fix RCU deref check warning in sel_netport_insert()

Manually fix up a semantic mis-merge wrt security_netlink_recv():

 - the interface was removed in commit fd77846152 ("security: remove
   the security_netlink_recv hook as it is equivalent to capable()")

 - a new user of it appeared in commit a38f7907b9 ("crypto: Add
   userspace configuration API")

causing no automatic merge conflict, but Eric Paris pointed out the
issue.
2012-01-14 18:36:33 -08:00
Eric Paris f423e5ba76 capabilities: remove __cap_full_set definition
In 5163b583a0 I removed __cap_full_set but
forgot to remove it from a header.  Do that.

Reported-by: Kornilios Kourtis <kkourt@cslab.ece.ntua.gr>
Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-05 18:53:01 -05:00
Eric Paris f1c84dae0e capabilities: remove task_ns_* functions
task_ in the front of a function, in the security subsystem anyway, means
to me at least, that we are operating with that task as the subject of the
security decision.  In this case what it means is that we are using current as
the subject but we use the task to get the right namespace.  Who in the world
would ever realize that's what task_ns_capability means just by the name?  This
patch eliminates the task_ns functions entirely and uses the has_ns_capability
function instead.  This means we explicitly open code the ns in question in
the caller.  I think it makes the caller a LOT more clear what is going on.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Serge E. Hallyn <serge.hallyn@canonical.com>
2012-01-05 18:52:59 -05:00
Eric Paris 7b61d64849 capabilites: introduce new has_ns_capabilities_noaudit
For consistency in interfaces, introduce a new interface called
has_ns_capabilities_noaudit.  It checks if the given task has the given
capability in the given namespace.  Use this new function by
has_capabilities_noaudit.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Serge E. Hallyn <serge.hallyn@canonical.com>
2012-01-05 18:52:57 -05:00
Maciej Żenczykowski 6cc7a765c2 net: allow CAP_NET_RAW to set socket options IP{,V6}_TRANSPARENT
Up till now the IP{,V6}_TRANSPARENT socket options (which actually set
the same bit in the socket struct) have required CAP_NET_ADMIN
privileges to set or clear the option.

- we make clearing the bit not require any privileges.
- we allow CAP_NET_ADMIN to set the bit (as before this change)
- we allow CAP_NET_RAW to set this bit, because raw
  sockets already pretty much effectively allow you
  to emulate socket transparency.

Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-20 18:21:36 -04:00
James Morris 434d42cfd0 Merge branch 'next' into for-linus 2011-05-24 22:55:24 +10:00
Linus Torvalds 78c4def67e Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimer: Make lookup table const
  RTC: Disable CONFIG_RTC_CLASS from being built as a module
  timers: Fix alarmtimer build issues when CONFIG_RTC_CLASS=n
  timers: Remove delayed irqwork from alarmtimers implementation
  timers: Improve alarmtimer comments and minor fixes
  timers: Posix interface for alarm-timers
  timers: Introduce in-kernel alarm-timer interface
  timers: Add rb_init_node() to allow for stack allocated rb nodes
  time: Add timekeeping_inject_sleeptime
2011-05-19 17:45:08 -07:00
James Morris 12a5a2621b Merge branch 'master' into next
Conflicts:
	include/linux/capability.h

Manually resolve merge conflict w/ thanks to Stephen Rothwell.

Signed-off-by: James Morris <jmorris@namei.org>
2011-05-19 18:51:57 +10:00
Serge E. Hallyn 47a150edc2 Cache user_ns in struct cred
If !CONFIG_USERNS, have current_user_ns() defined to (&init_user_ns).

Get rid of _current_user_ns.  This requires nsown_capable() to be
defined in capability.c rather than as static inline in capability.h,
so do that.

Request_key needs init_user_ns defined at current_user_ns if
!CONFIG_USERNS, so forward-declare that in cred.h if !CONFIG_USERNS
at current_user_ns() define.

Compile-tested with and without CONFIG_USERNS.

Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
[ This makes a huge performance difference for acl_permission_check(),
  up to 30%.  And that is one of the hottest kernel functions for loads
  that are pathname-lookup heavy.  ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-13 11:45:33 -07:00
John Stultz 9a7adcf5c6 timers: Posix interface for alarm-timers
This patch exposes alarm-timers to userland via the posix clock
and timers interface, using two new clockids: CLOCK_REALTIME_ALARM
and CLOCK_BOOTTIME_ALARM. Both clockids behave identically to
CLOCK_REALTIME and CLOCK_BOOTTIME, respectively, but timers
set against the _ALARM suffixed clockids will wake the system if
it is suspended.

Some background can be found here:
	https://lwn.net/Articles/429925/

The concept for Alarm-timers was inspired by the Android Alarm
driver (by Arve Hjønnevåg) found in the Android kernel tree.

See: http://android.git.kernel.org/?p=kernel/common.git;a=blob;f=drivers/rtc/alarm.c;h=1250edfbdf3302f5e4ea6194847c6ef4bb7beb1c;hb=android-2.6.36

While the in-kernel interface is pretty similar between
alarm-timers and Android alarm driver, the user-space interface
for the Android alarm driver is via ioctls to a new char device.
As mentioned above, I've instead chosen to export this functionality
via the posix interface, as it seemed a little simpler and avoids
creating duplicate interfaces to things like CLOCK_REALTIME and
CLOCK_MONOTONIC under alternate names (ie:ANDROID_ALARM_RTC and
ANDROID_ALARM_SYSTEMTIME).

The semantics of the Android alarm driver are different from what
this posix interface provides. For instance, threads other then
the thread waiting on the Android alarm driver are able to modify
the alarm being waited on. Also this interface does not allow
the same wakelock semantics that the Android driver provides
(ie: kernel takes a wakelock on RTC alarm-interupt, and holds it
through process wakeup, and while the process runs, until the
process either closes the char device or calls back in to wait
on a new alarm).

One potential way to implement similar semantics may be via
the timerfd infrastructure, but this needs more research.

There may also need to be some sort of sysfs system level policy
hooks that allow alarm timers to be disabled to keep them
from firing at inappropriate times (ie: laptop in a well insulated
bag, mid-flight).

CC: Arve Hjønnevåg <arve@android.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-04-26 14:01:46 -07:00
Eric Paris a3232d2fa2 capabilities: delete all CAP_INIT macros
The CAP_INIT macros of INH, BSET, and EFF made sense at one point in time,
but now days they aren't helping.  Just open code the logic in the
init_cred.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-04-04 10:31:16 +10:00
Eric Paris 5163b583a0 capabilities: delete unused cap_set_full
unused code.  Clean it up.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Andrew G. Morgan <morgan@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>
2011-04-04 10:31:12 +10:00
Eric Paris ffa8e59df0 capabilities: do not drop CAP_SETPCAP from the initial task
In olden' days of yore CAP_SETPCAP had special meaning for the init task.
We actually have code to make sure that CAP_SETPCAP wasn't in pE of things
using the init_cred.  But CAP_SETPCAP isn't so special any more and we
don't have a reason to special case dropping it for init or kthreads....

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Andrew G. Morgan <morgan@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>
2011-04-04 10:31:09 +10:00
Serge E. Hallyn 3263245de4 userns: make has_capability* into real functions
So we can let type safety keep things sane, and as a bonus we can remove
the declaration of init_user_ns in capability.h.

Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:47:06 -07:00
Serge E. Hallyn 8409cca705 userns: allow ptrace from non-init user namespaces
ptrace is allowed to tasks in the same user namespace according to the
usual rules (i.e.  the same rules as for two tasks in the init user
namespace).  ptrace is also allowed to a user namespace to which the
current task the has CAP_SYS_PTRACE capability.

Changelog:
	Dec 31: Address feedback by Eric:
		. Correct ptrace uid check
		. Rename may_ptrace_ns to ptrace_capable
		. Also fix the cap_ptrace checks.
	Jan  1: Use const cred struct
	Jan 11: use task_ns_capable() in place of ptrace_capable().
	Feb 23: same_or_ancestore_user_ns() was not an appropriate
		check to constrain cap_issubset.  Rather, cap_issubset()
		only is meaningful when both capsets are in the same
		user_ns.

Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:47:05 -07:00
Serge E. Hallyn 3486740a4f userns: security: make capabilities relative to the user namespace
- Introduce ns_capable to test for a capability in a non-default
  user namespace.
- Teach cap_capable to handle capabilities in a non-default
  user namespace.

The motivation is to get to the unprivileged creation of new
namespaces.  It looks like this gets us 90% of the way there, with
only potential uid confusion issues left.

I still need to handle getting all caps after creation but otherwise I
think I have a good starter patch that achieves all of your goals.

Changelog:
	11/05/2010: [serge] add apparmor
	12/14/2010: [serge] fix capabilities to created user namespaces
	Without this, if user serge creates a user_ns, he won't have
	capabilities to the user_ns he created.  THis is because we
	were first checking whether his effective caps had the caps
	he needed and returning -EPERM if not, and THEN checking whether
	he was the creator.  Reverse those checks.
	12/16/2010: [serge] security_real_capable needs ns argument in !security case
	01/11/2011: [serge] add task_ns_capable helper
	01/11/2011: [serge] add nsown_capable() helper per Bastian Blank suggestion
	02/16/2011: [serge] fix a logic bug: the root user is always creator of
		    init_user_ns, but should not always have capabilities to
		    it!  Fix the check in cap_capable().
	02/21/2011: Add the required user_ns parameter to security_capable,
		    fixing a compile failure.
	02/23/2011: Convert some macros to functions as per akpm comments.  Some
		    couldn't be converted because we can't easily forward-declare
		    them (they are inline if !SECURITY, extern if SECURITY).  Add
		    a current_user_ns function so we can use it in capability.h
		    without #including cred.h.  Move all forward declarations
		    together to the top of the #ifdef __KERNEL__ section, and use
		    kernel-doc format.
	02/23/2011: Per dhowells, clean up comment in cap_capable().
	02/23/2011: Per akpm, remove unreachable 'return -EPERM' in cap_capable.

(Original written and signed off by Eric;  latest, modified version
acked by him)

[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: export current_user_ns() for ecryptfs]
[serge.hallyn@canonical.com: remove unneeded extra argument in selinux's task_has_capability]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:47:02 -07:00
Serge E. Hallyn ce6ada35bd security: Define CAP_SYSLOG
Privileged syslog operations currently require CAP_SYS_ADMIN.  Split
this off into a new CAP_SYSLOG privilege which we can sanely take away
from a container through the capability bounding set.

With this patch, an lxc container can be prevented from messing with
the host's syslog (i.e. dmesg -c).

Changelog: mar 12 2010: add selinux capability2:cap_syslog perm
Changelog: nov 22 2010:
	. port to new kernel
	. add a WARN_ONCE if userspace isn't using CAP_SYSLOG

Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Andrew G. Morgan <morgan@kernel.org>
Acked-By: Kees Cook <kees.cook@canonical.com>
Cc: James Morris <jmorris@namei.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: "Christopher J. PeBenito" <cpebenito@tresys.com>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: James Morris <jmorris@namei.org>
2010-11-29 08:35:12 +11:00
Mimi Zohar af4f136056 security: move LSM xattrnames to xattr.h
Make the security extended attributes names global. Updated to move
the remaining Smack xattrs.

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:34:57 +10:00
Serge E. Hallyn b3a222e52e remove CONFIG_SECURITY_FILE_CAPABILITIES compile option
As far as I know, all distros currently ship kernels with default
CONFIG_SECURITY_FILE_CAPABILITIES=y.  Since having the option on
leaves a 'no_file_caps' option to boot without file capabilities,
the main reason to keep the option is that turning it off saves
you (on my s390x partition) 5k.  In particular, vmlinux sizes
came to:

without patch fscaps=n:		 	53598392
without patch fscaps=y:		 	53603406
with this patch applied:		53603342

with the security-next tree.

Against this we must weigh the fact that there is no simple way for
userspace to figure out whether file capabilities are supported,
while things like per-process securebits, capability bounding
sets, and adding bits to pI if CAP_SETPCAP is in pE are not supported
with SECURITY_FILE_CAPABILITIES=n, leaving a bit of a problem for
applications wanting to know whether they can use them and/or why
something failed.

It also adds another subtly different set of semantics which we must
maintain at the risk of severe security regressions.

So this patch removes the SECURITY_FILE_CAPABILITIES compile
option.  It drops the kernel size by about 50k over the stock
SECURITY_FILE_CAPABILITIES=y kernel, by removing the
cap_limit_ptraced_target() function.

Changelog:
	Nov 20: remove cap_limit_ptraced_target() as it's logic
		was ifndef'ed.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Acked-by: Andrew G. Morgan" <morgan@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>
2009-11-24 15:06:47 +11:00
GeunSik Lim bcf5644242 trivial: change address of the libcap source.
This is patch to change ftp site of the libcap source.
"ftp://linux.kernel.org" address does not exist.

Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21 15:14:51 +02:00
Serge E. Hallyn 0ad30b8fd5 add some long-missing capabilities to fs_mask
When POSIX capabilities were introduced during the 2.1 Linux
cycle, the fs mask, which represents the capabilities which having
fsuid==0 is supposed to grant, did not include CAP_MKNOD and
CAP_LINUX_IMMUTABLE.  However, before capabilities the privilege
to call these did in fact depend upon fsuid==0.

This patch introduces those capabilities into the fsmask,
restoring the old behavior.

See the thread starting at http://lkml.org/lkml/2009/3/11/157 for
reference.

Note that if this fix is deemed valid, then earlier kernel versions (2.4
and 2.2) ought to be fixed too.

Changelog:
	[Mar 23] Actually delete old CAP_FS_SET definition...
	[Mar 20] Updated against J. Bruce Fields's patch

Reported-by: Igor Zhbanov <izh1979@gmail.com>
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: stable@kernel.org
Cc: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13 08:32:28 -07:00
J. Bruce Fields 76a67ec6fb nfsd: nfsd should drop CAP_MKNOD for non-root
Since creating a device node is normally an operation requiring special
privilege, Igor Zhbanov points out that it is surprising (to say the
least) that a client can, for example, create a device node on a
filesystem exported with root_squash.

So, make sure CAP_MKNOD is among the capabilities dropped when an nfsd
thread handles a request from a non-root user.

Reported-by: Igor Zhbanov <izh1979@gmail.com>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-03-17 14:55:55 -04:00
Jaswinder Singh Rajput 9fa91d99bf headers_check fix: linux/capability.h
fix the following 'make headers_check' warning:

  usr/include/linux/capability.h:73: extern's make no sense in userspace

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-01-30 23:41:27 +05:30
David Howells 3699c53c48 CRED: Fix regression in cap_capable() as shown up by sys_faccessat() [ver #3]
Fix a regression in cap_capable() due to:

	commit 3b11a1dece
	Author: David Howells <dhowells@redhat.com>
	Date:   Fri Nov 14 10:39:26 2008 +1100

	    CRED: Differentiate objective and effective subjective credentials on a task

The problem is that the above patch allows a process to have two sets of
credentials, and for the most part uses the subjective credentials when
accessing current's creds.

There is, however, one exception: cap_capable(), and thus capable(), uses the
real/objective credentials of the target task, whether or not it is the current
task.

Ordinarily this doesn't matter, since usually the two cred pointers in current
point to the same set of creds.  However, sys_faccessat() makes use of this
facility to override the credentials of the calling process to make its test,
without affecting the creds as seen from other processes.

One of the things sys_faccessat() does is to make an adjustment to the
effective capabilities mask, which cap_capable(), as it stands, then ignores.

The affected capability check is in generic_permission():

	if (!(mask & MAY_EXEC) || execute_ok(inode))
		if (capable(CAP_DAC_OVERRIDE))
			return 0;

This change passes the set of credentials to be tested down into the commoncap
and SELinux code.  The security functions called by capable() and
has_capability() select the appropriate set of credentials from the process
being checked.

This can be tested by compiling the following program from the XFS testsuite:

/*
 *  t_access_root.c - trivial test program to show permission bug.
 *
 *  Written by Michael Kerrisk - copyright ownership not pursued.
 *  Sourced from: http://linux.derkeiler.com/Mailing-Lists/Kernel/2003-10/6030.html
 */
#include <limits.h>
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <sys/stat.h>

#define UID 500
#define GID 100
#define PERM 0
#define TESTPATH "/tmp/t_access"

static void
errExit(char *msg)
{
    perror(msg);
    exit(EXIT_FAILURE);
} /* errExit */

static void
accessTest(char *file, int mask, char *mstr)
{
    printf("access(%s, %s) returns %d\n", file, mstr, access(file, mask));
} /* accessTest */

int
main(int argc, char *argv[])
{
    int fd, perm, uid, gid;
    char *testpath;
    char cmd[PATH_MAX + 20];

    testpath = (argc > 1) ? argv[1] : TESTPATH;
    perm = (argc > 2) ? strtoul(argv[2], NULL, 8) : PERM;
    uid = (argc > 3) ? atoi(argv[3]) : UID;
    gid = (argc > 4) ? atoi(argv[4]) : GID;

    unlink(testpath);

    fd = open(testpath, O_RDWR | O_CREAT, 0);
    if (fd == -1) errExit("open");

    if (fchown(fd, uid, gid) == -1) errExit("fchown");
    if (fchmod(fd, perm) == -1) errExit("fchmod");
    close(fd);

    snprintf(cmd, sizeof(cmd), "ls -l %s", testpath);
    system(cmd);

    if (seteuid(uid) == -1) errExit("seteuid");

    accessTest(testpath, 0, "0");
    accessTest(testpath, R_OK, "R_OK");
    accessTest(testpath, W_OK, "W_OK");
    accessTest(testpath, X_OK, "X_OK");
    accessTest(testpath, R_OK | W_OK, "R_OK | W_OK");
    accessTest(testpath, R_OK | X_OK, "R_OK | X_OK");
    accessTest(testpath, W_OK | X_OK, "W_OK | X_OK");
    accessTest(testpath, R_OK | W_OK | X_OK, "R_OK | W_OK | X_OK");

    exit(EXIT_SUCCESS);
} /* main */

This can be run against an Ext3 filesystem as well as against an XFS
filesystem.  If successful, it will show:

	[root@andromeda src]# ./t_access_root /tmp/xxx 0 4043 4043
	---------- 1 dhowells dhowells 0 2008-12-31 03:00 /tmp/xxx
	access(/tmp/xxx, 0) returns 0
	access(/tmp/xxx, R_OK) returns 0
	access(/tmp/xxx, W_OK) returns 0
	access(/tmp/xxx, X_OK) returns -1
	access(/tmp/xxx, R_OK | W_OK) returns 0
	access(/tmp/xxx, R_OK | X_OK) returns -1
	access(/tmp/xxx, W_OK | X_OK) returns -1
	access(/tmp/xxx, R_OK | W_OK | X_OK) returns -1

If unsuccessful, it will show:

	[root@andromeda src]# ./t_access_root /tmp/xxx 0 4043 4043
	---------- 1 dhowells dhowells 0 2008-12-31 02:56 /tmp/xxx
	access(/tmp/xxx, 0) returns 0
	access(/tmp/xxx, R_OK) returns -1
	access(/tmp/xxx, W_OK) returns -1
	access(/tmp/xxx, X_OK) returns -1
	access(/tmp/xxx, R_OK | W_OK) returns -1
	access(/tmp/xxx, R_OK | X_OK) returns -1
	access(/tmp/xxx, W_OK | X_OK) returns -1
	access(/tmp/xxx, R_OK | W_OK | X_OK) returns -1

I've also tested the fix with the SELinux and syscalls LTP testsuites.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: J. Bruce Fields <bfields@citi.umich.edu>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-01-07 09:38:48 +11:00