Commit Graph

769622 Commits

Author SHA1 Message Date
Kirill A. Shutemov 027232da7c mm: introduce vma_init()
Not all VMAs allocated with vm_area_alloc().  Some of them allocated on
stack or in data segment.

The new helper can be use to initialize VMA properly regardless where it
was allocated.

Link: http://lkml.kernel.org/r/20180724121139.62570-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-26 19:38:03 -07:00
Dan Williams 31c5bda3a6 mm: fix exports that inadvertently make put_page() EXPORT_SYMBOL_GPL
Commit e763848843 ("mm: introduce MEMORY_DEVICE_FS_DAX and
CONFIG_DEV_PAGEMAP_OPS") added two EXPORT_SYMBOL_GPL() symbols, but
these symbols are required by the inlined put_page(), thus accidentally
making put_page() a GPL export only.  This breaks OpenAFS (at least).

Mark them EXPORT_SYMBOL() instead.

Link: http://lkml.kernel.org/r/153128611970.2928.11310692420711601254.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: e763848843 ("mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Joe Gorse <jhgorse@gmail.com>
Reported-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Joe Gorse <jhgorse@gmail.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Mark Vitale <mvitale@sinenomine.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-26 19:38:03 -07:00
Davidlohr Bueso f075faa300 ipc/sem.c: prevent queue.status tearing in semop
In order for load/store tearing prevention to work, _all_ accesses to
the variable in question need to be done around READ and WRITE_ONCE()
macros.  Ensure everyone does so for q->status variable for
semtimedop().

Link: http://lkml.kernel.org/r/20180717052654.676-1-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-26 19:38:03 -07:00
Dave Jiang 15d36fecd0 mm: disallow mappings that conflict for devm_memremap_pages()
When pmem namespaces created are smaller than section size, this can
cause an issue during removal and gpf was observed:

  general protection fault: 0000 1 SMP PTI
  CPU: 36 PID: 3941 Comm: ndctl Tainted: G W 4.14.28-1.el7uek.x86_64 #2
  task: ffff88acda150000 task.stack: ffffc900233a4000
  RIP: 0010:__put_page+0x56/0x79
  Call Trace:
    devm_memremap_pages_release+0x155/0x23a
    release_nodes+0x21e/0x260
    devres_release_all+0x3c/0x48
    device_release_driver_internal+0x15c/0x207
    device_release_driver+0x12/0x14
    unbind_store+0xba/0xd8
    drv_attr_store+0x27/0x31
    sysfs_kf_write+0x3f/0x46
    kernfs_fop_write+0x10f/0x18b
    __vfs_write+0x3a/0x16d
    vfs_write+0xb2/0x1a1
    SyS_write+0x55/0xb9
    do_syscall_64+0x79/0x1ae
    entry_SYSCALL_64_after_hwframe+0x3d/0x0

Add code to check whether we have a mapping already in the same section
and prevent additional mappings from being created if that is the case.

Link: http://lkml.kernel.org/r/152909478401.50143.312364396244072931.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-26 19:38:03 -07:00
Arnd Bergmann 03758dbbe2 kasan: only select SLUB_DEBUG with SYSFS=y
Building with KASAN and SLUB but without sysfs now results in a
build-time error:

  WARNING: unmet direct dependencies detected for SLUB_DEBUG
    Depends on [n]: SLUB [=y] && SYSFS [=n]
    Selected by [y]:
    - KASAN [=y] && HAVE_ARCH_KASAN [=y] && (SLUB [=y] || SLAB [=n] && !DEBUG_SLAB [=n]) && SLUB [=y]
  mm/slub.c:4565:12: error: 'list_locations' defined but not used [-Werror=unused-function]
   static int list_locations(struct kmem_cache *s, char *buf,
              ^~~~~~~~~~~~~~
  mm/slub.c:4406:13: error: 'validate_slab_cache' defined but not used [-Werror=unused-function]
   static long validate_slab_cache(struct kmem_cache *s)

This disallows that broken configuration in Kconfig.

Link: http://lkml.kernel.org/r/20180709154019.1693026-1-arnd@arndb.de
Fixes: dd275caf4a ("kasan: depend on CONFIG_SLUB_DEBUG")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-26 19:38:03 -07:00
Tejun Heo b512719f77 delayacct: fix crash in delayacct_blkio_end() after delayacct init failure
While forking, if delayacct init fails due to memory shortage, it
continues expecting all delayacct users to check task->delays pointer
against NULL before dereferencing it, which all of them used to do.

Commit c96f5471ce ("delayacct: Account blkio completion on the correct
task"), while updating delayacct_blkio_end() to take the target task
instead of always using %current, made the function test NULL on
%current->delays and then continue to operated on @p->delays.  If
%current succeeded init while @p didn't, it leads to the following
crash.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
 IP: __delayacct_blkio_end+0xc/0x40
 PGD 8000001fd07e1067 P4D 8000001fd07e1067 PUD 1fcffbb067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 4 PID: 25774 Comm: QIOThread0 Not tainted 4.16.0-9_fbk1_rc2_1180_g6b593215b4d7 #9
 RIP: 0010:__delayacct_blkio_end+0xc/0x40
 Call Trace:
  try_to_wake_up+0x2c0/0x600
  autoremove_wake_function+0xe/0x30
  __wake_up_common+0x74/0x120
  wake_up_page_bit+0x9c/0xe0
  mpage_end_io+0x27/0x70
  blk_update_request+0x78/0x2c0
  scsi_end_request+0x2c/0x1e0
  scsi_io_completion+0x20b/0x5f0
  blk_mq_complete_request+0xa2/0x100
  ata_scsi_qc_complete+0x79/0x400
  ata_qc_complete_multiple+0x86/0xd0
  ahci_handle_port_interrupt+0xc9/0x5c0
  ahci_handle_port_intr+0x54/0xb0
  ahci_single_level_irq_intr+0x3b/0x60
  __handle_irq_event_percpu+0x43/0x190
  handle_irq_event_percpu+0x20/0x50
  handle_irq_event+0x2a/0x50
  handle_edge_irq+0x80/0x1c0
  handle_irq+0xaf/0x120
  do_IRQ+0x41/0xc0
  common_interrupt+0xf/0xf

Fix it by updating delayacct_blkio_end() check @p->delays instead.

Link: http://lkml.kernel.org/r/20180724175542.GP1934745@devbig577.frc2.facebook.com
Fixes: c96f5471ce ("delayacct: Account blkio completion on the correct task")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dave Jones <dsj@fb.com>
Debugged-by: Dave Jones <dsj@fb.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Josh Snyder <joshs@netflix.com>
Cc: <stable@vger.kernel.org>	[4.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-26 19:38:03 -07:00
Dave Airlie 6d52aacd92 Merge branch 'drm-next-4.19' of git://people.freedesktop.org/~agd5f/linux into drm-next
Updates for 4.19.  Mostly bug fixes and cleanups.  Highlights:
- Internal API cleanup in GPU scheduler
- Decouple i2c and aux abstractions in DC
- Update maintainers
- Misc cleanups
- Misc bug fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725215326.2709-1-alexander.deucher@amd.com
2018-07-27 12:31:48 +10:00
Dave Airlie daa9897560 Cleanups
- Change g2d driver to component based driver
   . g2d driver was last customed sub driver so this patch series
     changes it to component based driver, which also makes gem handling
     to be more simplify.
 - Cleanup of Exynos DRM suspend/resume
   . Register exynos drm core suspend/resume functions
     to prepare/complete callbacks of dev_pm_ops instead of suspend/resume
     callbacks to ensure exynos_drm_suspend() is called before any suspend
     callback from the real devices to avoid some issues on boards with
     complex pipelines.
   . Also Add pm_runtime_furce_suspend/resume as SYSTEM_SLEEP_PM_OPS
     to ensure that resources of each devices will be released
     for the system PM suspend/resume cycle.
 - Remove local value not used.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbWCykAAoJEFc4NIkMQxK4zToP/RRqz+p9lMaO/fIgKBpMxzgw
 aoj+1NPm4UOPKCMeL0CJitC98VIj4LnXeLGi3Q3K7CRDI0lObIx2zDzsWZil4Por
 wRlOOBZTaEuN9KTu61qY/t04TZ7LZhdM7Iar1QsrmGTP6lxqs9zECIJan+/5hAr1
 GZwIAFGg36aE8GfsuQtYFpV4GaSG1ENd00GvSoBXtFb8D0Q2z93/eb7G061FTH9g
 RjDHMDzsP2iKibk2JnHfg39cVrLqEpQoCDv5V+jrDlAGTPL/oXhOcPADeuO2t38T
 bAE7Sztdw0qNj34tf9tsfNV37QtN2GROLMEAmMmG8ONMrRbr2MDQXJizO9urig+E
 oKl0BIakDoj5xGb7Zmez5rvRVS5d0NlpnuDdvoZcYL8CZV2vFSBcpMjGmQYZwMfL
 Vhs+phXo4uYptPLIwTxPsZUxiQP1HnzkJKvm0cfYUXFRkuESWWQi70NUTOSCMbo1
 +JoSOhTeyezaqwFIviPQVcBis5a3xQM3KXwiZm/PHIQ/xkhSEuMQsrPvQ6/1W5pB
 urfXPLroU5KH6DXsFk42TkQJ2CYpVhrJLoPaWw3erQuSxIaUYGJVlYhWf5hSywy5
 e2gboXILdRCE1RZnzB7N3RTah/0KOR8qnZwklGf0GtiW1O9neo6qwAAc1hZ+Z2sA
 YMyFY+fywU9NshoRI4H7
 =h0gl
 -----END PGP SIGNATURE-----

Merge tag 'exynos-drm-next-for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

Cleanups
- Change g2d driver to component based driver
  . g2d driver was last customed sub driver so this patch series
    changes it to component based driver, which also makes gem handling
    to be more simplify.
- Cleanup of Exynos DRM suspend/resume
  . Register exynos drm core suspend/resume functions
    to prepare/complete callbacks of dev_pm_ops instead of suspend/resume
    callbacks to ensure exynos_drm_suspend() is called before any suspend
    callback from the real devices to avoid some issues on boards with
    complex pipelines.
  . Also Add pm_runtime_furce_suspend/resume as SYSTEM_SLEEP_PM_OPS
    to ensure that resources of each devices will be released
    for the system PM suspend/resume cycle.
- Remove local value not used.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Link: https://patchwork.freedesktop.org/patch/msgid/1532505748-10025-1-git-send-email-inki.dae@samsung.com
2018-07-27 12:26:40 +10:00
Dave Airlie 52ea6a115f Merge branch 'for-upstream/malidp-fixes' of git://linux-arm.org/linux-ld into drm-next
I have a couple of small patches for malidp to be applied in drm-next.
They have arisen from the decision to switch the writeback connectors to
always connected.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180723145302.GA28052@e110455-lin.cambridge.arm.com
2018-07-27 12:23:11 +10:00
Dave Airlie a6f6cdefd4 drm/imx: cleanup and csi improvements
- Remove the unused struct imx_drm_crtc and the unused pipes field
   from imx_drm_device and replace drm_dev_unref with drm_dev_put.
 - Extend CSI configuration to support RGB888 and BGR888 capture,
   as well as 16-bit RGB565 capture via a parallel bus.
 - Add CPMEM support for negative interlace offsets, which is
   necessary to support writing captured bottom-top interlaced
   fields to memory with interleaved lines.
 -----BEGIN PGP SIGNATURE-----
 
 iI4EABYIADYWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCW1G7LxgccGhpbGlwcC56
 YWJlbEBnbWFpbC5jb20ACgkQ1YWnJRg3YsBNlQD9FofVPjKCFW79jy/H2bf+hWVB
 uGhLAxfSsHmLLUSi7Z8A/jFtafSMQDU8uNNbTTHNjofKiFqdjpUljCUgTuA1paUC
 =oPJE
 -----END PGP SIGNATURE-----

Merge tag 'imx-drm-next-2018-07-20' of git://git.pengutronix.de/git/pza/linux into drm-next

drm/imx: cleanup and csi improvements

- Remove the unused struct imx_drm_crtc and the unused pipes field
  from imx_drm_device and replace drm_dev_unref with drm_dev_put.
- Extend CSI configuration to support RGB888 and BGR888 capture,
  as well as 16-bit RGB565 capture via a parallel bus.
- Add CPMEM support for negative interlace offsets, which is
  necessary to support writing captured bottom-top interlaced
  fields to memory with interleaved lines.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Link: https://patchwork.freedesktop.org/patch/msgid/1532100583.3438.9.camel@pengutronix.de
2018-07-27 12:20:10 +10:00
Dave Airlie 050d2a5533 drm/imx: imx-drm ldb and ipu-v3 csi fixes
- Disable the LVDS Display Bridge (LDB) on driver bind. This is
   necessary to guarantee correct LVDS signals in case the bootloader
   left the LVDS output active.
 - Remove false positive warning about disabled second LVDS channel in
   dual-channel mode. In this mode, the second LVDS channel can not be
   used separately. If the second channel is correctly described as
   disabled in the device tree, the driver warned about this anyway.
 - Fix the CSI confiuration to not only enable interlaced capture mode
   for V4L2_FIELD_SEQ_BT and V4L2_FIELD_SEQ_TB, but also for the
   V4L2_FIELD_ALTERNATE interlacing mode. Before, it incorrectly tried
   to capture progressive frames in that case.
 -----BEGIN PGP SIGNATURE-----
 
 iI4EABYIADYWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCW1G4zRgccGhpbGlwcC56
 YWJlbEBnbWFpbC5jb20ACgkQ1YWnJRg3YsCZSgEAhIjcChl3NqsgqDzs4H1Pj+42
 WS0OAHA6FSo5Jt1mthoA/jUbHp3tpEu1S4z1bUm3Hi5cifmZX2Jg/QLjsF4hzewK
 =6eNq
 -----END PGP SIGNATURE-----

Merge tag 'imx-drm-fixes-2018-07-20' of git://git.pengutronix.de/git/pza/linux into drm-fixes

drm/imx: imx-drm ldb and ipu-v3 csi fixes

- Disable the LVDS Display Bridge (LDB) on driver bind. This is
  necessary to guarantee correct LVDS signals in case the bootloader
  left the LVDS output active.
- Remove false positive warning about disabled second LVDS channel in
  dual-channel mode. In this mode, the second LVDS channel can not be
  used separately. If the second channel is correctly described as
  disabled in the device tree, the driver warned about this anyway.
- Fix the CSI confiuration to not only enable interlaced capture mode
  for V4L2_FIELD_SEQ_BT and V4L2_FIELD_SEQ_TB, but also for the
  V4L2_FIELD_ALTERNATE interlacing mode. Before, it incorrectly tried
  to capture progressive frames in that case.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532100423.3438.8.camel@pengutronix.de
2018-07-27 12:17:31 +10:00
Dave Airlie 5a75cd11a8 - Only a quirk for GLK NUC HDMI port issues
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJbWfkAAAoJEPpiX2QO6xPKv/EH/iWq/0JmNuWzET+PZM12Jam7
 24Y9k2VgPzs68h+R+IUagMZz6J2UvSKgt8/GFayTTJa8ylrNjMzRcGqOt0mvRvqo
 IeVFzivtctqbXyi6V6e5zPAoUdH7xgj/OPWoq32AyI9qIoehuLGRNa0PyT3Jp+M9
 Z3uHJoYjy0KB0rmDR0IG2WtmIwYjRXdptHnHaoSRERK3mB+5JTXtKLn8I0V0bvSA
 ZDHornYLJGPtCFEWV3/rW2xOajOyAjzAxmepc/6B5bUZa12DMHqWmf0dHZR2iBn9
 SO3OawAFf2TjsVDm4E2/ZarNjUVXx2T0D0bS4yrFybupcLkWVqOHaUsfIxNwxVs=
 =pPNH
 -----END PGP SIGNATURE-----

Merge tag 'drm-intel-fixes-2018-07-26' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Only a quirk for GLK NUC HDMI port issues

Signed-off-by: Dave Airlie <airlied@redhat.com>

Link: https://patchwork.freedesktop.org/patch/msgid/20180726163856.GA21162@intel.com
2018-07-27 12:11:31 +10:00
Martin Wilck 17d51b10d7 block: bio_iov_iter_get_pages: pin more pages for multi-segment IOs
bio_iov_iter_get_pages() currently only adds pages for the next non-zero
segment from the iov_iter to the bio. That's suboptimal for callers,
which typically try to pin as many pages as fit into the bio. This patch
converts the current bio_iov_iter_get_pages() into a static helper, and
introduces a new helper that allocates as many pages as

 1) fit into the bio,
 2) are present in the iov_iter,
 3) and can be pinned by MM.

Error is returned only if zero pages could be pinned. Because of 3), a
zero return value doesn't necessarily mean all pages have been pinned.
Callers that have to pin every page in the iov_iter must still call this
function in a loop (this is currently the case).

This change matters most for __blkdev_direct_IO_simple(), which calls
bio_iov_iter_get_pages() only once. If it obtains less pages than
requested, it returns a "short write" or "short read", and
__generic_file_write_iter() falls back to buffered writes, which may
lead to data corruption.

Fixes: 72ecad22d9 ("block: support a full bio worth of IO for simplified bdev direct-io")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-26 11:52:36 -06:00
Martin Wilck 9362dd1109 blkdev: __blkdev_direct_IO_simple: fix leak in error case
Fixes: 72ecad22d9 ("block: support a full bio worth of IO for simplified bdev direct-io")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-26 11:52:33 -06:00
Martin Wilck b403ea2404 block: bio_iov_iter_get_pages: fix size of last iovec
If the last page of the bio is not "full", the length of the last
vector slot needs to be corrected. This slot has the index
(bio->bi_vcnt - 1), but only in bio->bi_io_vec. In the "bv" helper
array, which is shifted by the value of bio->bi_vcnt at function
invocation, the correct index is (nr_pages - 1).

v2: improved readability following suggestions from Ming Lei.
v3: followed a formatting suggestion from Christoph Hellwig.

Fixes: 2cefe4dbaa ("block: add bio_iov_iter_get_pages()")
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-26 11:52:29 -06:00
Jens Axboe 78e18063a9 Merge branch 'nvme-4.18' of git://git.infradead.org/nvme into for-linus
Pull NVMe fixes from Christoph:

"Two small fixes each for the FC code and the target."

* 'nvme-4.18' of git://git.infradead.org/nvme:
  nvmet: only check for filebacking on -ENOTBLK
  nvmet: fixup crash on NULL device path
  nvme: if_ready checks to fail io to deleting controller
  nvmet-fc: fix target sgl list on large transfers
2018-07-26 11:48:44 -06:00
Thomas Tai bd91b56cb3 PCI/AER: Work around use-after-free in pcie_do_fatal_recovery()
When an fatal error is received by a non-bridge device, the device is
removed, and pci_stop_and_remove_bus_device() deallocates the device
structure.  The freed device structure is used by subsequent code to send
uevents and print messages.

Hold a reference on the device until we're finished using it.  This is not
an ideal fix because pcie_do_fatal_recovery() should not use the device at
all after removing it, but that's too big a project for right now.

Fixes: 7e9084b367 ("PCI/AER: Handle ERR_FATAL with removal and re-enumeration of devices")
Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
[bhelgaas: changelog, reduce get/put coverage]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-26 12:13:04 -05:00
Linus Torvalds cd3f77d74a USB fixes for 4.18-rc7
Here are a number of USB fixes and new device ids for 4.18-rc7.
 
 The largest number are a bunch of gadget driver fixes that got delayed
 in being submitted earlier due to vacation schedules, but nothing really
 huge is present in them.  There are some new device ids and some PHY
 driver fixes that were connected to some USB ones.  Full details are in
 the shortlog.
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW1nXnQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymoWACfTbc0TF6u9hNALIS9nsgLxevZLjYAnA5RJ12y
 TTBeXMIAvCUKILAXPQok
 =spWc
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of USB fixes and new device ids for 4.18-rc7.

  The largest number are a bunch of gadget driver fixes that got delayed
  in being submitted earlier due to vacation schedules, but nothing
  really huge is present in them. There are some new device ids and some
  PHY driver fixes that were connected to some USB ones. Full details
  are in the shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
  usb: core: handle hub C_PORT_OVER_CURRENT condition
  usb: xhci: Fix memory leak in xhci_endpoint_reset()
  usb: typec: tcpm: Fix sink PDO starting index for PPS APDO selection
  usb: gadget: f_fs: Only return delayed status when len is 0
  usb: gadget: f_uac2: fix endianness of 'struct cntrl_*_lay3'
  usb: dwc2: Fix inefficient copy of unaligned buffers
  usb: dwc2: Fix DMA alignment to start at allocated boundary
  usb: dwc3: rockchip: Fix PHY documentation links.
  tools: usb: ffs-test: Fix build on big endian systems
  usb: gadget: aspeed: Workaround memory ordering issue
  usb: dwc3: gadget: remove redundant variable maxpacket
  usb: dwc2: avoid NULL dereferences
  usb/phy: fix PPC64 build errors in phy-fsl-usb.c
  usb: dwc2: host: do not delay retries for CONTROL IN transfers
  usb: gadget: u_audio: protect stream runtime fields with stream spinlock
  usb: gadget: u_audio: remove cached period bytes value
  usb: gadget: u_audio: remove caching of stream buffer parameters
  usb: gadget: u_audio: update hw_ptr in iso_complete after data copied
  usb: gadget: u_audio: fix pcm/card naming in g_audio_setup()
  usb: gadget: f_uac2: fix error handling in afunc_bind (again)
  ...
2018-07-26 09:29:29 -07:00
Linus Torvalds fd4f84faec staging driver fixes for 4.18-rc7
Here are 3 small staging driver fixes for 4.18-rc7.  One is a revert of
 an earlier patch that turned out to be incorrect, one is a fix for the
 speakup drivers, and the last a fix for the ks7010 driver to resolve a
 regression.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW1nWRg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yn3sgCfRfyR5eWd//zjOd+RPK5pgVmntpsAn2RO4/hF
 3/QBUH8Pnd0fQDCE87w8
 =T47D
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver fixes from Greg KH:
 "Here are three small staging driver fixes for 4.18-rc7.

  One is a revert of an earlier patch that turned out to be incorrect,
  one is a fix for the speakup drivers, and the last a fix for the
  ks7010 driver to resolve a regression.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: speakup: fix wraparound in uaccess length check
  staging: ks7010: call 'hostif_mib_set_request_int' instead of 'hostif_mib_set_request_bool'
  Revert "staging:r8188eu: Use lib80211 to support TKIP"
2018-07-26 09:26:41 -07:00
Linus Torvalds a5f9e5dab3 Driver core fixes for 4.18-rc7
This is a single driver core fix for 4.18-rc7.  It partially reverts a
 previous commit to resolve some reported issues.
 
 It has been in linux-next for a while now with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW1nVXg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylt+ACgnOBM409ab+U2z/0EZcJrd3fXjXcAn1XD1e5p
 Y0fBLaJ/sB+VpyiRP/gK
 =WxMr
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
 "This is a single driver core fix for 4.18-rc7. It partially reverts a
  previous commit to resolve some reported issues.

  It has been in linux-next for a while now with no reported issues"

* tag 'driver-core-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Partially revert "driver core: correct device's shutdown order"
2018-07-26 09:25:03 -07:00
Linus Torvalds 9bd591839e ACPI fix for 4.18-rc7
Fix a recent ACPICA regression causing the AML parser to get confused
 and fail in some situations involving incorrect AML in an ACPI table
 (Erik Schmauss).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJbWdSOAAoJEILEb/54YlRxkccP/3kxz1Fr4lmwDaXkReOR1Zxa
 ShdoKKdruDXMXYGMnJWw+jilhbRb6fWQq6jWzmpAOnd0l98voGYFhdelMp6JhyNi
 4ei5SnM5HML4QJPR3xUhXYhEUwDy4YZIaubjXE7w4IDeh33eJG4h/LO90nzlWb15
 Ge08iv8cQmZIOFVrnn2T5OWlseMAelCWVh++v9W40ns2RjDOIisH3eELvM90zlZ+
 7BtD3jzeSp7DHzvYYdlSToEsiIAccWhttSiKZ4ViyWu2ncnxcO+ymzKkvh9jxWFr
 8olAP9xnV3ceS1/m4vkfuhQb2JmDPz5quChLrLAbe5LfZiA1zLBprBs+tdIYbn/7
 jmWvRR7oD0rF8itBoGb6oheOWA1M40hfsH3s+zh+IJRWFDkiFLdV5c3YCZvPLLEc
 zv4swo/29I06gDlWWUu1Tq1TmnDX4Z62ZGo7VSw0d+5UHgqWaUpaTLn99Fl+zlaJ
 lGyPFlee9ou7NBbi1yzcqLrstv7q79IgLBL1khvrLJOFB8WksPKUW1EnIOB2TjBa
 YRj11pdMsJnvo6I5h9YY/fVR6vJxFVcUSITMPjKq2vQ/bOIeELTryEvMSX3FW2y8
 KRv39zrTx1tDY2l2NHbDgbEoLd7DZ6u0DVahkU4oSumBSnebqIvhz24shpWzo9nm
 Pgt3WRd2siIMm7FtFF+2
 =B+ti
 -----END PGP SIGNATURE-----

Merge tag 'acpi-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
 "Fix a recent ACPICA regression causing the AML parser to get confused
  and fail in some situations involving incorrect AML in an ACPI table
  (Erik Schmauss)"

* tag 'acpi-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: AML Parser: ignore dispatcher error status during table load
2018-07-26 09:23:17 -07:00
Linus Torvalds 99015e94f2 Power management fix for 4.18-rc7
Fix up the recently introduced cpufreq driver for Qualcomm Kryo
 processors by adding a terminating NULL entry to its table of
 device IDs (YueHaibing).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJbWdP8AAoJEILEb/54YlRxuxUP/AutbdUh/t83FRRXVtNa+uBx
 SAJ3SHn4TCJ4GKAYj5+/ca5ztj7eO9PilGdCk2gtSLW269nE8zvrm0tSjJ3boh0n
 QFUu/y53ZwAreB2Xa5p52sRolCpvEybSD0Ha0nY70w3ShvEQ3ggwRG8AskpS8d1j
 lw3CQ/r36EYO+B8oo9kvkNq8GUQloQJQK4+pYc6CNHi1I8LPhQtx11c0KJp6TsKm
 4eTOqIooyFXvJwLMPUvebgv2CzcZFTEfQFNllrBmxufmfzgL84vAQuS2rsdQLyK6
 B0WZwFoktNZ/xKg/U/cmMnpEyZMbmxSXJroCNxAQ8Qbn/VTnaQo72VouWYvIKcrD
 fPIbSUJM6QIpvSfVkc9rHt04GS3XCewY83BnkREQOT2IZTu8I5IXso0fNYU4ks3K
 8Fkda8eRBHbcVu2+UUo88etGIZqoTmy47A1sJnHnNS2Wvsgecm38y5bIP/rekDrt
 fVu4A3mpyzwncXX+hB57NEhit2OKvzV8p8XNEBwZQGLjTl4xgUe4pDpneybxDeJW
 0oNPEIOgNB2VdF2yNh936OoVTQna0/3CwVBIM3mijRZOxCGtUAq/SFAe377aR7XX
 IYpi1fXuq4Q6pWSXOf3VlwR7atFYCEmQ/u9vEMiJ/Xtox130SVPwlSpl1ZRioXD5
 12V6HezJHaF7h1SfQSud
 =I8t3
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fix from Rafael Wysocki:
 "Fix up the recently introduced cpufreq driver for Qualcomm Kryo
  processors by adding a terminating NULL entry to its table of device
  IDs (YueHaibing)"

* tag 'pm-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: qcom-kryo: add NULL entry to the end of_device_id array
2018-07-26 09:21:28 -07:00
Snild Dolkow 3e536e222f kthread, tracing: Don't expose half-written comm when creating kthreads
There is a window for racing when printing directly to task->comm,
allowing other threads to see a non-terminated string. The vsnprintf
function fills the buffer, counts the truncated chars, then finally
writes the \0 at the end.

	creator                     other
	vsnprintf:
	  fill (not terminated)
	  count the rest            trace_sched_waking(p):
	  ...                         memcpy(comm, p->comm, TASK_COMM_LEN)
	  write \0

The consequences depend on how 'other' uses the string. In our case,
it was copied into the tracing system's saved cmdlines, a buffer of
adjacent TASK_COMM_LEN-byte buffers (note the 'n' where 0 should be):

	crash-arm64> x/1024s savedcmd->saved_cmdlines | grep 'evenk'
	0xffffffd5b3818640:     "irq/497-pwr_evenkworker/u16:12"

...and a strcpy out of there would cause stack corruption:

	[224761.522292] Kernel panic - not syncing: stack-protector:
	    Kernel stack is corrupted in: ffffff9bf9783c78

	crash-arm64> kbt | grep 'comm\|trace_print_context'
	#6  0xffffff9bf9783c78 in trace_print_context+0x18c(+396)
	      comm (char [16]) =  "irq/497-pwr_even"

	crash-arm64> rd 0xffffffd4d0e17d14 8
	ffffffd4d0e17d14:  2f71726900000000 5f7277702d373934   ....irq/497-pwr_
	ffffffd4d0e17d24:  726f776b6e657665 3a3631752f72656b   evenkworker/u16:
	ffffffd4d0e17d34:  f9780248ff003231 cede60e0ffffff9b   12..H.x......`..
	ffffffd4d0e17d44:  cede60c8ffffffd4 00000fffffffffd4   .....`..........

The workaround in e09e28671 (use strlcpy in __trace_find_cmdline) was
likely needed because of this same bug.

Solved by vsnprintf:ing to a local buffer, then using set_task_comm().
This way, there won't be a window where comm is not terminated.

Link: http://lkml.kernel.org/r/20180726071539.188015-1-snild@sony.com

Cc: stable@vger.kernel.org
Fixes: bc0c38d139 ("ftrace: latency tracer infrastructure")
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Snild Dolkow <snild@sony.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-26 09:59:33 -04:00
Steven Rostedt (VMware) 2519c1bbe3 tracing: Quiet gcc warning about maybe unused link variable
Commit 57ea2a34ad ("tracing/kprobes: Fix trace_probe flags on
enable_trace_kprobe() failure") added an if statement that depends on another
if statement that gcc doesn't see will initialize the "link" variable and
gives the warning:

 "warning: 'link' may be used uninitialized in this function"

It is really a false positive, but to quiet the warning, and also to make
sure that it never actually is used uninitialized, initialize the "link"
variable to NULL and add an if (!WARN_ON_ONCE(!link)) where the compiler
thinks it could be used uninitialized.

Cc: stable@vger.kernel.org
Fixes: 57ea2a34ad ("tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-25 22:33:50 -04:00
Steven Rostedt (VMware) 15cc78644d tracing: Fix possible double free in event_enable_trigger_func()
There was a case that triggered a double free in event_trigger_callback()
due to the called reg() function freeing the trigger_data and then it
getting freed again by the error return by the caller. The solution there
was to up the trigger_data ref count.

Code inspection found that event_enable_trigger_func() has the same issue,
but is not as easy to trigger (requires harder to trigger failures). It
needs to be solved slightly different as it needs more to clean up when the
reg() function fails.

Link: http://lkml.kernel.org/r/20180725124008.7008e586@gandalf.local.home

Cc: stable@vger.kernel.org
Fixes: 7862ad1846 ("tracing: Add 'enable_event' and 'disable_event' event trigger commands")
Reivewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-25 21:25:16 -04:00
Clint Taylor 0ca9488193 drm/i915/glk: Add Quirk for GLK NUC HDMI port issues.
On GLK NUC platforms the HDMI retiming buffer needs additional disabled
time to correctly sync to a faster incoming signal.

When measured on a scope the highspeed lines of the HDMI clock turn off
 for ~400uS during a normal resolution change. The HDMI retimer on the
 GLK NUC appears to require at least a full frame of quiet time before a
new faster clock can be correctly sync'd. Wait 100ms due to msleep
inaccuracies while waiting for a completed frame. Add a quirk to the
driver for GLK boards that use ITE66317 HDMI retimers.

V2: Add more devices to the quirk list
V3: Delay increased to 100ms, check to confirm crtc type is HDMI.
V4: crtc type check extended to include _DDI and whitespace fixes
v5: Fix white spaces, remove the macro for delay. Revert the crtc type
    check introduced in v4.

Cc: Imre Deak <imre.deak@intel.com>
Cc: <stable@vger.kernel.org> # v4.14+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105887
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Tested-by: Daniel Scheller <d.scheller.oss@gmail.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710200205.1478-1-radhakrishna.sripada@intel.com
(cherry picked from commit 90c3e21987)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-07-25 14:52:17 -07:00
Jia-Ju Bai 586092ab4b gpu: drm: amdgpu: Replace mdelay with msleep in cik_pcie_gen3_enable()
cik_pcie_gen3_enable() is only called by cik_common_hw_init(), which is
never called in atomic context.
cik_pcie_gen3_enable() calls mdelay() to busily wait, which is not
necessary.
mdelay() can be replaced with msleep().

This is found by a static analysis tool named DCNS written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25 15:06:40 -05:00
Alex Deucher 6cdf4e87b4 drm/amdgpu/gmc9: clarify GPUVM fault error message
The address printed is the actual address, not the page.

Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25 15:06:40 -05:00
Nayan Deshmukh 068c330419 drm/scheduler: remove sched field from the entity
The scheduler of the entity is decided by the run queue on which
it is queued. This patch avoids us the effort required to maintain
a sync between rq and sched field when we start shifting entites
among different rqs.

Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25 15:06:26 -05:00
Nayan Deshmukh cdc5017659 drm/scheduler: modify API to avoid redundancy
entity has a scheduler field and we don't need the sched argument
in any of the functions where entity is provided.

Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25 15:06:19 -05:00
Christian König bf314ca3f1 drm/amdgpu: reduce the number of placements for a BO
Make struct amdgpu_bo a bit smaller.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25 15:06:13 -05:00
Christian König c704ab18e0 drm/amdgpu: consistenly name amdgpu_bo_ functions
Just rename functions, no functional change.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25 15:06:06 -05:00
Christian König 6beccb15c4 MAINTAINERS: add entry for AMD PP code
Add separate entry for the power managent code on AMD GPUs.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rex Zhu <rezhu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25 15:05:54 -05:00
Christian König dbae59466f MAINTAINERS: Add separate section for DC
Note that Harry and Leo Li are maintainers for that stuff.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25 15:05:47 -05:00
Christian König 122b5a0598 MAINTAINERS: add new TTM maintainers
Roger unfortunately doesn't work for AMD any longer. So add Rui and
Jerry as co-maintainer as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25 15:05:39 -05:00
Christian König 4d4831a3da drm/amdgpu: expose only the first UVD instance for now
Going to completely rework the context to ring mapping with Nayan's GSoC
work, but for now just stopping to expose the second UVD instance should
do it.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25 15:05:32 -05:00
Christian König f8a91d4555 drm/amdgpu: clean up coding style a bit
No need to bitcast a boolean and even if we should use "!!" instead.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-25 15:05:08 -05:00
Linus Torvalds 6e77b26772 One more round of updates for problems seen this -rc series. Drivers fixes
are:
 
  - Amlogic Meson audio divider fix and CPU clk critical marking
 
  - Qualcomm multimedia GDSC marked as 'always on' to keep display working
 
  - Aspeed fixes for critical clks, resets causing clks to stay disabled, and
    an incorrect HPLL frequency calculation
 
  - Marvell Armada 3700 cpu clks would undervolt when switching from low
    frequencies to high frequencies because the voltage didn't stabilize in
    time so now we switch to an intermediate frequency
 
 Plus we have a core framework thinko that messed up the debugfs flag
 printing logic to make it not very useful.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAltYo8cRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSXJqQ/+JTY0qo+zxxWtoucwK2JNZGWPq3+3ZQc3
 cce4u6+w8dP4QkbVh0lu6A0IqcLcpKQ+1IYuc4Zz5TW+IUr/5NHL2ynTXAQadGs1
 1tqZwLJRLdr82FFGTqpRQ9dibzqqU384XAsKyfeGvXRrCvFFuzpy7P+yjxEj1+CU
 Ji7LzkZK8TSC+90cAQpNC6txwvieqP/vI99iBbIBIzz+Dy8FYQ3sBKZoCcxjefhI
 Ma0ZUCrCXw+IkG98Q3OkZ10lXmWfJmsUjdWTU9eBj6+V9raIR6d2QzJ2yOM+aShV
 SrV2AMKCbKgSIqG/3K6QIhwElNkcNhZzANHfPr8MoYz75JfXtn32B77S3BD0ayPW
 zl5PnLAckJyH1WSmNR9DMq0NXDHZnGGu7gbmeyRmgsCsvEof/c8cdH9/rO1PiETz
 uJljXx/sk2MwDXRu/lxlqHtnzWaPNuf24oc8JSGRz62tMeBPE7sKPaCzJah17E82
 lwnt8bn4p3Q7RtvuC+/fr56v/I1Bfl88L5wfet8/cpek4rSi78Dp/aUUnOXWHHod
 hnVMILBTHSfotMBTs0+V+pViLYCX1aOHlcxgURI/9pjvqPQl6wt5bhKdTWkq14xS
 l4VUtTKYoljJ8cnEA18MfZjhUO3E4gYCs94Gi2WfTp1c/BDwBwa3nsBoagIT2te7
 BQUmGfH8v5k=
 =bH+p
 -----END PGP SIGNATURE-----

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
 "One more round of updates for problems seen this -rc series. Drivers
  fixes are:

   - Amlogic Meson audio divider fix and CPU clk critical marking

   - Qualcomm multimedia GDSC marked as 'always on' to keep display
     working

   - Aspeed fixes for critical clks, resets causing clks to stay
     disabled, and an incorrect HPLL frequency calculation

   - Marvell Armada 3700 cpu clks would undervolt when switching from
     low frequencies to high frequencies because the voltage didn't
     stabilize in time so now we switch to an intermediate frequency

  Plus we have a core framework thinko that messed up the debugfs flag
  printing logic to make it not very useful"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: aspeed: Support HPLL strapping on ast2400
  clk: mvebu: armada-37xx-periph: Fix switching CPU rate from 300Mhz to 1.2GHz
  clk: aspeed: Mark bclk (PCIe) and dclk (VGA) as critical
  clk/mmcc-msm8996: Make mmagic_bimc_gdsc ALWAYS_ON
  clk: aspeed: Treat a gate in reset as disabled
  clk: Really show symbolic clock flags in debugfs
  clk: qcom: gcc-msm8996: Disable halt check on UFS tx clock
  clk: meson: audio-divider is one based
  clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL
2018-07-25 11:03:56 -07:00
Linus Torvalds 5c61ef1b7c fscache fixes
-----BEGIN PGP SIGNATURE-----
 
 iQIVAwUAW1h/7Pu3V2unywtrAQJFOg/+NQswGJcTsJGeTL8tW+8nGtJVeTP6XaVh
 xPEjdqTBmimt6ciaNP1LxLLt9jQ50S1f83rWGZeFBQoNgWinoe3VtzSVdlQKhZcT
 jC5LtFVlTxw5rrL4uCsJywLLjD0NeH41ISbvCStcyYJExOZr+f4/VJXKNcwKjAvf
 kD1xDGnVZsZiGLWFjwBVaPJwFigquoLEU564InMnZbvMW95uZOPGfnwxAGmKQX2n
 BV3WxVizCc0MwlHMJYjs0cVMZNviuC+qg7YBJIoio3+Dq8FIn7ISn98LbhCpG7mi
 FoiRi+7xs7VCGm9yqtkXL+euHcSzjnJPnlYxpU8xGqAay0qKxoHecZj2iMEX327K
 E4mujQ40oqkMLhwy3GhT9cIpvbbQPu7+kS+k9x7UqVnzlhsKEeMp7TEFqSEebO9H
 kIuvfRBD3uZY0B/loLCB3Cc/B9OoWAUi6IGBRclwS9+RUuBnZY/jb7iQsEvcOv9u
 0EC0biSs1jizG1tLR0LmvjIyvS567t/DG/peLad1lOqPe6Up2mO4XIeyS9phwXAD
 ryupnKPr3tGRgvfJ4jLUZPC8/nrv5Fg9R0YhICEEBqhwKn1uTZgyc085d2EHOdQp
 fmfbXR/oz4TwjjwlgzrLMQbLB7GUpkgCFxsIPpEVeFH3RDbZNO1UbLovDMUuRaos
 lFWHzd4K4XA=
 =yuI9
 -----END PGP SIGNATURE-----

Merge tag 'fscache-fixes-20180725' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull fscache/cachefiles fixes from David Howells:

 - Allow cancelled operations to be queued so they can be cleaned up.

 - Fix a refcounting bug in the monitoring of reads on backend files
   whereby a race can occur between monitor objects being listed for
   work, the work processing being queued and the work processor running
   and destroying the monitor objects.

 - Fix a ref overput in object attachment, whereby a tentatively
   considered object is put in error handling without first being 'got'.

 - Fix a missing clear of the CACHEFILES_OBJECT_ACTIVE flag whereby an
   assertion occurs when we retry because it seems the object is now
   active.

 - Wait rather BUG'ing on an object collision in the depths of
   cachefiles as the active object should be being cleaned up - also
   depends on the one above.

* tag 'fscache-fixes-20180725' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  cachefiles: Wait rather than BUG'ing on "Unexpected object collision"
  cachefiles: Fix missing clear of the CACHEFILES_OBJECT_ACTIVE flag
  fscache: Fix reference overput in fscache_attach_object() error handling
  cachefiles: Fix refcounting bug in backing-file read monitoring
  fscache: Allow cancelled operations to be enqueued
2018-07-25 10:55:24 -07:00
Artem Savkov 57ea2a34ad tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure
If enable_trace_kprobe fails to enable the probe in enable_k(ret)probe
it returns an error, but does not unset the tp flags it set previously.
This results in a probe being considered enabled and failures like being
unable to remove the probe through kprobe_events file since probes_open()
expects every probe to be disabled.

Link: http://lkml.kernel.org/r/20180725102826.8300-1-asavkov@redhat.com
Link: http://lkml.kernel.org/r/20180725142038.4765-1-asavkov@redhat.com

Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 41a7dd420c ("tracing/kprobes: Support ftrace_event_file base multibuffer")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-25 11:41:08 -04:00
Masami Hiramatsu 82f4f3e69c selftests/ftrace: Add snapshot and tracing_on test case
Add a testcase for checking snapshot and tracing_on
relationship. This ensures that the snapshotting doesn't
affect current tracing on/off settings.

Link: http://lkml.kernel.org/r/153149932412.11274.15289227592627901488.stgit@devbox

Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-25 10:29:42 -04:00
Masami Hiramatsu 73c8d89455 ring_buffer: tracing: Inherit the tracing setting to next ring buffer
Maintain the tracing on/off setting of the ring_buffer when switching
to the trace buffer snapshot.

Taking a snapshot is done by swapping the backup ring buffer
(max_tr_buffer). But since the tracing on/off setting is defined
by the ring buffer, when swapping it, the tracing on/off setting
can also be changed. This causes a strange result like below:

  /sys/kernel/debug/tracing # cat tracing_on
  1
  /sys/kernel/debug/tracing # echo 0 > tracing_on
  /sys/kernel/debug/tracing # cat tracing_on
  0
  /sys/kernel/debug/tracing # echo 1 > snapshot
  /sys/kernel/debug/tracing # cat tracing_on
  1
  /sys/kernel/debug/tracing # echo 1 > snapshot
  /sys/kernel/debug/tracing # cat tracing_on
  0

We don't touch tracing_on, but snapshot changes tracing_on
setting each time. This is an anomaly, because user doesn't know
that each "ring_buffer" stores its own tracing-enable state and
the snapshot is done by swapping ring buffers.

Link: http://lkml.kernel.org/r/153149929558.11274.11730609978254724394.stgit@devbox

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp>
Cc: stable@vger.kernel.org
Fixes: debdd57f51 ("tracing: Make a snapshot feature available from userspace")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[ Updated commit log and comment in the code ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-25 10:29:41 -04:00
Steven Rostedt (VMware) 1863c38725 tracing: Fix double free of event_trigger_data
Running the following:

 # cd /sys/kernel/debug/tracing
 # echo 500000 > buffer_size_kb
[ Or some other number that takes up most of memory ]
 # echo snapshot > events/sched/sched_switch/trigger

Triggers the following bug:

 ------------[ cut here ]------------
 kernel BUG at mm/slub.c:296!
 invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
 CPU: 6 PID: 6878 Comm: bash Not tainted 4.18.0-rc6-test+ #1066
 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016
 RIP: 0010:kfree+0x16c/0x180
 Code: 05 41 0f b6 72 51 5b 5d 41 5c 4c 89 d7 e9 ac b3 f8 ff 48 89 d9 48 89 da 41 b8 01 00 00 00 5b 5d 41 5c 4c 89 d6 e9 f4 f3 ff ff <0f> 0b 0f 0b 48 8b 3d d9 d8 f9 00 e9 c1 fe ff ff 0f 1f 40 00 0f 1f
 RSP: 0018:ffffb654436d3d88 EFLAGS: 00010246
 RAX: ffff91a9d50f3d80 RBX: ffff91a9d50f3d80 RCX: ffff91a9d50f3d80
 RDX: 00000000000006a4 RSI: ffff91a9de5a60e0 RDI: ffff91a9d9803500
 RBP: ffffffff8d267c80 R08: 00000000000260e0 R09: ffffffff8c1a56be
 R10: fffff0d404543cc0 R11: 0000000000000389 R12: ffffffff8c1a56be
 R13: ffff91a9d9930e18 R14: ffff91a98c0c2890 R15: ffffffff8d267d00
 FS:  00007f363ea64700(0000) GS:ffff91a9de580000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000055c1cacc8e10 CR3: 00000000d9b46003 CR4: 00000000001606e0
 Call Trace:
  event_trigger_callback+0xee/0x1d0
  event_trigger_write+0xfc/0x1a0
  __vfs_write+0x33/0x190
  ? handle_mm_fault+0x115/0x230
  ? _cond_resched+0x16/0x40
  vfs_write+0xb0/0x190
  ksys_write+0x52/0xc0
  do_syscall_64+0x5a/0x160
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
 RIP: 0033:0x7f363e16ab50
 Code: 73 01 c3 48 8b 0d 38 83 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 79 db 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 1e e3 01 00 48 89 04 24
 RSP: 002b:00007fff9a4c6378 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
 RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f363e16ab50
 RDX: 0000000000000009 RSI: 000055c1cacc8e10 RDI: 0000000000000001
 RBP: 000055c1cacc8e10 R08: 00007f363e435740 R09: 00007f363ea64700
 R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000009
 R13: 0000000000000001 R14: 00007f363e4345e0 R15: 00007f363e4303c0
 Modules linked in: ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device i915 snd_pcm snd_timer i2c_i801 snd soundcore i2c_algo_bit drm_kms_helper
86_pkg_temp_thermal video kvm_intel kvm irqbypass wmi e1000e
 ---[ end trace d301afa879ddfa25 ]---

The cause is because the register_snapshot_trigger() call failed to
allocate the snapshot buffer, and then called unregister_trigger()
which freed the data that was passed to it. Then on return to the
function that called register_snapshot_trigger(), as it sees it
failed to register, it frees the trigger_data again and causes
a double free.

By calling event_trigger_init() on the trigger_data (which only ups
the reference counter for it), and then event_trigger_free() afterward,
the trigger_data would not get freed by the registering trigger function
as it would only up and lower the ref count for it. If the register
trigger function fails, then the event_trigger_free() called after it
will free the trigger data normally.

Link: http://lkml.kernel.org/r/20180724191331.738eb819@gandalf.local.home

Cc: stable@vger.kerne.org
Fixes: 93e31ffbf4 ("tracing: Add 'snapshot' event trigger command")
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-25 10:29:24 -04:00
Kiran Kumar Modukuri c2412ac45a cachefiles: Wait rather than BUG'ing on "Unexpected object collision"
If we meet a conflicting object that is marked FSCACHE_OBJECT_IS_LIVE in
the active object tree, we have been emitting a BUG after logging
information about it and the new object.

Instead, we should wait for the CACHEFILES_OBJECT_ACTIVE flag to be cleared
on the old object (or return an error).  The ACTIVE flag should be cleared
after it has been removed from the active object tree.  A timeout of 60s is
used in the wait, so we shouldn't be able to get stuck there.

Fixes: 9ae326a690 ("CacheFiles: A cache that backs onto a mounted filesystem")
Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2018-07-25 14:49:00 +01:00
Kiran Kumar Modukuri 5ce83d4bb7 cachefiles: Fix missing clear of the CACHEFILES_OBJECT_ACTIVE flag
In cachefiles_mark_object_active(), the new object is marked active and
then we try to add it to the active object tree.  If a conflicting object
is already present, we want to wait for that to go away.  After the wait,
we go round again and try to re-mark the object as being active - but it's
already marked active from the first time we went through and a BUG is
issued.

Fix this by clearing the CACHEFILES_OBJECT_ACTIVE flag before we try again.

Analysis from Kiran Kumar Modukuri:

[Impact]
Oops during heavy NFS + FSCache + Cachefiles

CacheFiles: Error: Overlong wait for old active object to go away.

BUG: unable to handle kernel NULL pointer dereference at 0000000000000002

CacheFiles: Error: Object already active kernel BUG at
fs/cachefiles/namei.c:163!

[Cause]
In a heavily loaded system with big files being read and truncated, an
fscache object for a cookie is being dropped and a new object being
looked. The new object being looked for has to wait for the old object
to go away before the new object is moved to active state.

[Fix]
Clear the flag 'CACHEFILES_OBJECT_ACTIVE' for the new object when
retrying the object lookup.

[Testcase]
Have run ~100 hours of NFS stress tests and have not seen this bug recur.

[Regression Potential]
 - Limited to fscache/cachefiles.

Fixes: 9ae326a690 ("CacheFiles: A cache that backs onto a mounted filesystem")
Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2018-07-25 14:49:00 +01:00
Kiran Kumar Modukuri f29507ce66 fscache: Fix reference overput in fscache_attach_object() error handling
When a cookie is allocated that causes fscache_object structs to be
allocated, those objects are initialised with the cookie pointer, but
aren't blessed with a ref on that cookie unless the attachment is
successfully completed in fscache_attach_object().

If attachment fails because the parent object was dying or there was a
collision, fscache_attach_object() returns without incrementing the cookie
counter - but upon failure of this function, the object is released which
then puts the cookie, whether or not a ref was taken on the cookie.

Fix this by taking a ref on the cookie when it is assigned in
fscache_object_init(), even when we're creating a root object.


Analysis from Kiran Kumar:

This bug has been seen in 4.4.0-124-generic #148-Ubuntu kernel

BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776277

fscache cookie ref count updated incorrectly during fscache object
allocation resulting in following Oops.

kernel BUG at /build/linux-Y09MKI/linux-4.4.0/fs/fscache/internal.h:321!
kernel BUG at /build/linux-Y09MKI/linux-4.4.0/fs/fscache/cookie.c:639!

[Cause]
Two threads are trying to do operate on a cookie and two objects.

(1) One thread tries to unmount the filesystem and in process goes over a
    huge list of objects marking them dead and deleting the objects.
    cookie->usage is also decremented in following path:

      nfs_fscache_release_super_cookie
       -> __fscache_relinquish_cookie
        ->__fscache_cookie_put
        ->BUG_ON(atomic_read(&cookie->usage) <= 0);

(2) A second thread tries to lookup an object for reading data in following
    path:

    fscache_alloc_object
    1) cachefiles_alloc_object
        -> fscache_object_init
           -> assign cookie, but usage not bumped.
    2) fscache_attach_object -> fails in cant_attach_object because the
         cookie's backing object or cookie's->parent object are going away
    3) fscache_put_object
        -> cachefiles_put_object
          ->fscache_object_destroy
            ->fscache_cookie_put
               ->BUG_ON(atomic_read(&cookie->usage) <= 0);

[NOTE from dhowells] It's unclear as to the circumstances in which (2) can
take place, given that thread (1) is in nfs_kill_super(), however a
conflicting NFS mount with slightly different parameters that creates a
different superblock would do it.  A backtrace from Kiran seems to show
that this is a possibility:

    kernel BUG at/build/linux-Y09MKI/linux-4.4.0/fs/fscache/cookie.c:639!
    ...
    RIP: __fscache_cookie_put+0x3a/0x40 [fscache]
    Call Trace:
     __fscache_relinquish_cookie+0x87/0x120 [fscache]
     nfs_fscache_release_super_cookie+0x2d/0xb0 [nfs]
     nfs_kill_super+0x29/0x40 [nfs]
     deactivate_locked_super+0x48/0x80
     deactivate_super+0x5c/0x60
     cleanup_mnt+0x3f/0x90
     __cleanup_mnt+0x12/0x20
     task_work_run+0x86/0xb0
     exit_to_usermode_loop+0xc2/0xd0
     syscall_return_slowpath+0x4e/0x60
     int_ret_from_sys_call+0x25/0x9f

[Fix] Bump up the cookie usage in fscache_object_init, when it is first
being assigned a cookie atomically such that the cookie is added and bumped
up if its refcount is not zero.  Remove the assignment in
fscache_attach_object().

[Testcase]
I have run ~100 hours of NFS stress tests and not seen this bug recur.

[Regression Potential]
 - Limited to fscache/cachefiles.

Fixes: ccc4fc3d11 ("FS-Cache: Implement the cookie management part of the netfs API")
Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2018-07-25 14:49:00 +01:00
Kiran Kumar Modukuri 934140ab02 cachefiles: Fix refcounting bug in backing-file read monitoring
cachefiles_read_waiter() has the right to access a 'monitor' object by
virtue of being called under the waitqueue lock for one of the pages in its
purview.  However, it has no ref on that monitor object or on the
associated operation.

What it is allowed to do is to move the monitor object to the operation's
to_do list, but once it drops the work_lock, it's actually no longer
permitted to access that object.  However, it is trying to enqueue the
retrieval operation for processing - but it can only do this via a pointer
in the monitor object, something it shouldn't be doing.

If it doesn't enqueue the operation, the operation may not get processed.
If the order is flipped so that the enqueue is first, then it's possible
for the work processor to look at the to_do list before the monitor is
enqueued upon it.

Fix this by getting a ref on the operation so that we can trust that it
will still be there once we've added the monitor to the to_do list and
dropped the work_lock.  The op can then be enqueued after the lock is
dropped.

The bug can manifest in one of a couple of ways.  The first manifestation
looks like:

 FS-Cache:
 FS-Cache: Assertion failed
 FS-Cache: 6 == 5 is false
 ------------[ cut here ]------------
 kernel BUG at fs/fscache/operation.c:494!
 RIP: 0010:fscache_put_operation+0x1e3/0x1f0
 ...
 fscache_op_work_func+0x26/0x50
 process_one_work+0x131/0x290
 worker_thread+0x45/0x360
 kthread+0xf8/0x130
 ? create_worker+0x190/0x190
 ? kthread_cancel_work_sync+0x10/0x10
 ret_from_fork+0x1f/0x30

This is due to the operation being in the DEAD state (6) rather than
INITIALISED, COMPLETE or CANCELLED (5) because it's already passed through
fscache_put_operation().

The bug can also manifest like the following:

 kernel BUG at fs/fscache/operation.c:69!
 ...
    [exception RIP: fscache_enqueue_operation+246]
 ...
 #7 [ffff883fff083c10] fscache_enqueue_operation at ffffffffa0b793c6
 #8 [ffff883fff083c28] cachefiles_read_waiter at ffffffffa0b15a48
 #9 [ffff883fff083c48] __wake_up_common at ffffffff810af028

I'm not entirely certain as to which is line 69 in Lei's kernel, so I'm not
entirely clear which assertion failed.

Fixes: 9ae326a690 ("CacheFiles: A cache that backs onto a mounted filesystem")
Reported-by: Lei Xue <carmark.dlut@gmail.com>
Reported-by: Vegard Nossum <vegard.nossum@gmail.com>
Reported-by: Anthony DeRobertis <aderobertis@metrics.net>
Reported-by: NeilBrown <neilb@suse.com>
Reported-by: Daniel Axtens <dja@axtens.net>
Reported-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
2018-07-25 14:49:00 +01:00
Kiran Kumar Modukuri d0eb06afe7 fscache: Allow cancelled operations to be enqueued
Alter the state-check assertion in fscache_enqueue_operation() to allow
cancelled operations to be given processing time so they can be cleaned up.

Also fix a debugging statement that was requiring such operations to have
an object assigned.

Fixes: 9ae326a690 ("CacheFiles: A cache that backs onto a mounted filesystem")
Reported-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2018-07-25 14:31:20 +01:00
Johannes Weiner 7b0eb6b41a arm64: fix vmemmap BUILD_BUG_ON() triggering on !vmemmap setups
Arnd reports the following arm64 randconfig build error with the PSI
patches that add another page flag:

  /git/arm-soc/arch/arm64/mm/init.c: In function 'mem_init':
  /git/arm-soc/include/linux/compiler.h:357:38: error: call to
  '__compiletime_assert_618' declared with attribute error: BUILD_BUG_ON
  failed: sizeof(struct page) > (1 << STRUCT_PAGE_MAX_SHIFT)

The additional page flag causes other information stored in
page->flags to get bumped into their own struct page member:

  #if SECTIONS_WIDTH+ZONES_WIDTH+NODES_SHIFT+LAST_CPUPID_SHIFT <=
  BITS_PER_LONG - NR_PAGEFLAGS
  #define LAST_CPUPID_WIDTH LAST_CPUPID_SHIFT
  #else
  #define LAST_CPUPID_WIDTH 0
  #endif

  #if defined(CONFIG_NUMA_BALANCING) && LAST_CPUPID_WIDTH == 0
  #define LAST_CPUPID_NOT_IN_PAGE_FLAGS
  #endif

which in turn causes the struct page size to exceed the size set in
STRUCT_PAGE_MAX_SHIFT. This value is an an estimate used to size the
VMEMMAP page array according to address space and struct page size.

However, the check is performed - and triggers here - on a !VMEMMAP
config, which consumes an additional 22 page bits for the sparse
section id. When VMEMMAP is enabled, those bits are returned, cpupid
doesn't need its own member, and the page passes the VMEMMAP check.

Restrict that check to the situation it was meant to check: that we
are sizing the VMEMMAP page array correctly.

Says Arnd:

    Further experiments show that the build error already existed before,
    but was only triggered with larger values of CONFIG_NR_CPU and/or
    CONFIG_NODES_SHIFT that might be used in actual configurations but
    not in randconfig builds.

    With longer CPU and node masks, I could recreate the problem with
    kernels as old as linux-4.7 when arm64 NUMA support got added.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Fixes: 1a2db30034 ("arm64, numa: Add NUMA support for arm64 platforms.")
Fixes: 3e1907d5bf ("arm64: mm: move vmemmap region right below the linear region")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-07-25 13:32:30 +01:00
Dirk Mueller dc0e36581e arm64: Check for errata before evaluating cpu features
Since commit d3aec8a28b ("arm64: capabilities: Restrict KPTI
detection to boot-time CPUs") we rely on errata flags being already
populated during feature enumeration. The order of errata and
features was flipped as part of commit ed478b3f9e ("arm64:
capabilities: Group handling of features and errata workarounds").

Return to the orginal order of errata and feature evaluation to
ensure errata flags are present during feature evaluation.

Fixes: ed478b3f9e ("arm64: capabilities: Group handling of
    features and errata workarounds")
CC: Suzuki K Poulose <suzuki.poulose@arm.com>
CC: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Dirk Mueller <dmueller@suse.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-07-25 13:30:04 +01:00