EHCI Oxynos (drivers/usb/host/ehci-exynos.c) drives VBUS GPIO high when
trying to power up the bus, therefore the GPIO in DTS must be marked as
"active high". This will be important when EHCI driver is converted to
gpiod API that respects declared polarities.
Fixes: 4e8991def5 ("ARM: dts: exynos: Enable AX88760 USB hub on Origen board")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20220927220504.3744878-1-dmitry.torokhov@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
PXs3 reference board can change each USB port 0 and 1 to device mode
with jumpers. Prepare devicetree sources for USB port 0 and 1.
This specifies dr_mode, pinctrl, and some quirks and removes nodes for
unused phys and vbus-supply properties.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042321.4817-8-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The generic platform driver pcie-designware-plat.c doesn't work for
UniPhier PCIe endpoint controller, because the controller has some
necessary initialization sequence for the controller-specific logic.
Currently the controller doesn't use "snps,dw-pcie-ep" compatible,
so this is no longer needed. Remove the compatible string from the
pcie-ep node.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-10-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The dtschema warning:
uniphier-ld11-ref.dt.yaml: system-bus@58c00000: 'interrupt-parent' does not
match any of the regexes: '^.*@[1-5],[1-9a-f][0-9a-f]+$', 'pinctrl-[0-9]+'
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-9-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add ahci core controller and glue layer nodes including reset-controller
and sata-phy.
This supports for PXs2 and the boards without PXs2 vodka board that
doesn't implement any SATA connectors.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-8-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add ahci controller, glue layer, and clock nodes for Pro4 SoC. The glue
layer includes reset and phy, and the clock node is used for handling ahci
clocks on SoC-glue.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-7-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use human-readable definitions for GIC interrupt type and flag, instead of
hard-coding the numbers. No functional change.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-6-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
According to gpio-hog schema, should add the suffix "-hog" to the node
names including gpio-hog to fix the following warning.
uniphier-pro4-ref.dtb: gpio@55000000: 'xirq2' does not match any of the regexes: '^.+-hog(-[0-9+)?$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
This applies to the devicetree for LD4, LD6b, Pro4 and sLD8 SoCs.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-5-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This "usb-glue" stands for an external controller associated with USB core,
however, this is not common. So rename to "usb-controller".
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-4-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Actual phy nodes are each child node. The parent node should be
usb-controller node as a representation of the phy integration.
This applies to the devicetree for Pro4 SoC.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-3-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A check for CONFIG_DEBUG_LL_SER3 was added in v2.5.43. But the related
symbol DEBUG_LL_SER3 was already removed in v2.5.8. This check has
always evaluated to false. Remove it.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A long awaited sync to make the config closer to that used by OpenBMC
machines
- Enable PECI to provide defconfig coverage for the subsystem
-----BEGIN PGP SIGNATURE-----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=DONA
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=exxx
-----END PGP SIGNATURE-----
Merge tag 'aspeed-6.1-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/defconfig
ASPEED defconfig updates for 6.1
- A long awaited sync to make the config closer to that used by OpenBMC
machines
- Enable PECI to provide defconfig coverage for the subsystem
* tag 'aspeed-6.1-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: config: aspeed_g5: Enable PECI
ARM: configs: aspeed_g4: Remove appended DTB and ATAG
ARM: configs: aspeed: Refresh defconfigs
ARM: config: aspeed: Enable namespaces
ARM: configs: aspeed_g4: Enable IPV6 options
ARM: configs: aspeed_g4: Enable OCC and NBD drivers
ARM: configs: aspeed_g5: Enable MCTP stack
ARM: configs: aspeed_g5: Add PL2303 USB serial driver
ARM: configs: aspeed_g5: Add TPM TIS I2C driver
ARM: configs: aspeed_g5: Add mp5023 driver
ARM: configs: aspeed: Add support for USB flash drives
Link: https://lore.kernel.org/r/CACPK8XeLzL3hT8fwVw9fV7Ccduz_PNhZn_67z2yXefCEha6jJg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On arm32, the configuration options to specify the kernel command line
type depend on ATAGS. However, the actual CMDLINE cofiguration option
does not depend on ATAGS, and the code that handles this is not specific
to ATAGS (see drivers/of/fdt.c:early_init_dt_scan_chosen()).
Hence users who desire to override the kernel command line on arm32 must
enable support for ATAGS, even on a pure-DT system. Other architectures
(arm64, loongarch, microblaze, nios2, powerpc, and riscv) do not impose
such a restriction.
Hence drop the dependency on ATAGS.
Fixes: bd51e2f595 ("ARM: 7506/1: allow for ATAGS to be configured out when DT support is selected")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On older platforms that boot an image with an appended DTB, or where
the boot loader has no support for updating chosen/bootargs, it is
common to rely on CMDLINE_FORCE.
While a fixed command line can make the kernel unbootable on other
platforms, it is not guaranteed to cause that. E.g. all Renesas boards
use the same chosen/bootargs in upstream DTS, which works fine if your
DHCP server hands out proper nfsroot parameters.
Fixes: 84fc863606 ("ARM: make ARCH_MULTIPLATFORM user-visible")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
According to s5k6a3 driver code, the reset line for the chip appears to
be active low. This also matches the typical polarity of reset lines in
general. Let's fix it up as having correct polarity in DTS is important
when the driver will be switched over to gpiod API.
Fixes: b4fec64758 ("ARM: dts: Add camera device nodes for Exynos4412 TRATS2 board")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220913164104.203957-1-dmitry.torokhov@gmail.com
Link: https://lore.kernel.org/r/20220926104354.118578-2-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.
We also need to patch relevant DTS files, as the original code relied on
the fact that of_get_named_gpio_flags() would fetch any data encoded in
GPIO flags, even if it does not reflect valid flags for a GPIO.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/YxeS1BK2OBH1P/kO@google.com
Instead of passing GPIO numbers pertaining to ourselves through
platform data, just request GPIO descriptors from our own GPIO
chips and use them, and cut down on the unnecessary complexity.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Cory Maccarrone <darkstar6262@gmail.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220905115810.5987-1-linus.walleij@linaro.org
Add support to detect USB flash drives and create the /dev/sd* devices.
Also add support for vfat to support USB drives formatted as FAT32.
This support will be used to enable firmware updates via USB flash
drives where the firmware image is stored in the USB drive and it's
plugged into the BMC USB port.
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Tested-by: Adriana Kobylak <anoo@us.ibm.com>
Link: https://lore.kernel.org/r/20211112202931.2379145-1-anoo@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Now that the pinctrl definitions of the ast2600 SoC have been fixed,
see commit 925fbe1f7e ("dt-bindings: pinctrl: aspeed-g6: add FWQSPI
function/group"), it is safe to activate QSPI on the ast2600 evb.
Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Link: https://lore.kernel.org/r/20220603073705.1624351-1-clg@kaod.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
Removed NIC EEPROM driver IPMB-12 channel and enabled it as
generic i2c EEPROM.
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Link: https://lore.kernel.org/r/20220914115307.GA339@hcl-ThinkPad-T495
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add initial version of device tree for the BMC in the AMD DaytonaX
platform.
AMD DaytonaX platform is a customer reference board (CRB) with an
Aspeed ast2500 BMC manufactured by AMD.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220921210950.10568-3-aladyshev22@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Added IPMB-13 channel for Debug Card communication which improves the
readability of the machine and makes it easier to debug the server and
it will display some pieces of information about the server like "system
info", "Critical sensors" and "critical sel".
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220926124313.GA8400@hcl-ThinkPad-T495
Signed-off-by: Joel Stanley <joel@jms.id.au>
Remove the gpio-keys entries from the Ampere's Mt. Jade BMC device
tree. The user space applications are going to change from using
libevdev to libgpiod.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20220915080828.2894070-1-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The Mt. Mitchell BMC is an ASPEED AST2600-based BMC for the Mt. Mitchell
hardware reference platform with AmpereOne(TM) processor.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220817071539.176110-3-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This should be the last set of bugfixes in the SoC tree:
- Two fixes for Arm integrator, dealing with a regression caused
by invalid DT properties combined with a change in dma address
translation, and missing device_type annotations on the PCI
bus.
- Fixes for drivers/reset/, addressing bugs in i.MX8MP, Sparx5 and
NPCM8XX platforms.
- Bjorn Andersson's email address changes in the MAINTAINERS file
- Multiple minor fixes to Qualcomm dts files, and a change to the
remoteproc firmware filename that did not match the actual
path in the linux-firmware package.
- Minor code fixes for the Allwinner/sunxi SRAM driver, and the
broadcom STB Bus Interface Unit driver
- A build fix for the sunplus sp7021 platform
- Two dts fixes for TI OMAP family SoCs, addressing an extraneous
usb4 device node and an incorrect DMA handle.
-----BEGIN PGP SIGNATURE-----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=3Mv6
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This should be the last set of bugfixes in the SoC tree:
- Two fixes for Arm integrator, dealing with a regression caused by
invalid DT properties combined with a change in dma address
translation, and missing device_type annotations on the PCI bus
- Fixes for drivers/reset/, addressing bugs in i.MX8MP, Sparx5 and
NPCM8XX platforms
- Bjorn Andersson's email address changes in the MAINTAINERS file
- Multiple minor fixes to Qualcomm dts files, and a change to the
remoteproc firmware filename that did not match the actual path in
the linux-firmware package
- Minor code fixes for the Allwinner/sunxi SRAM driver, and the
broadcom STB Bus Interface Unit driver
- A build fix for the sunplus sp7021 platform
- Two dts fixes for TI OMAP family SoCs, addressing an extraneous
usb4 device node and an incorrect DMA handle"
* tag 'soc-fixes-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: integrator: Fix DMA ranges
ARM: dts: integrator: Tag PCI host with device_type
ARM: sunplus: fix serial console kconfig and build problems
reset: npcm: fix iprst2 and iprst4 setting
arm64: dts: qcom: sm8350: fix UFS PHY serdes size
soc: bcm: brcmstb: biuctrl: Avoid double of_node_put()
arm64: dts: qcom: sc8280xp-x13s: Update firmware location
soc: sunxi: sram: Fix debugfs info for A64 SRAM C
soc: sunxi: sram: Fix probe function ordering issues
soc: sunxi: sram: Prevent the driver from being unbound
soc: sunxi: sram: Actually claim SRAM regions
ARM: dts: am5748: keep usb4_tm disabled
reset: microchip-sparx5: issue a reset on startup
reset: imx7: Fix the iMX8MP PCIe PHY PERST support
MAINTAINERS: Update Bjorn's email address
arm64: dts: qcom: sc7280: move USB wakeup-source property
arm64: dts: qcom: thinkpad-x13s: Fix firmware location
arm64: dts: qcom: sm8150: Fix fastrpc iommu values
ARM: dts: am33xx: Fix MMCHS0 dma properties
In commit 19e8b701e2 ("a.out: Stop building a.out/osf1 support on
alpha and m68k") the last users of a.out were disabled.
As nothing has turned up to cause this change to be reverted, let's
remove the code implementing a.out support as well.
There may be userspace users of the uapi bits left so the uapi
headers have been left untouched.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> # arm defconfigs
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/871qrx3hq3.fsf@email.froward.int.ebiederm.org
Move some code that is only reachable when IS_ENABLED(CONFIG_ARM) into
the ARM EFI arch code.
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
A recent change affecting the behaviour of phys_to_dma() to
actually require the device tree ranges to work unmasked a
bug in the Integrator DMA ranges.
The PL110 uses the CMA allocator to obtain coherent allocations
from a dedicated 1MB video memory, leading to the following
call chain:
drm_gem_cma_create()
dma_alloc_attrs()
dma_alloc_from_dev_coherent()
__dma_alloc_from_coherent()
dma_get_device_base()
phys_to_dma()
translate_phys_to_dma()
phys_to_dma() by way of translate_phys_to_dma() will nowadays not
provide 1:1 mappings unless the ranges are properly defined in
the device tree and reflected into the dev->dma_range_map.
There is a bug in the device trees because the DMA ranges are
incorrectly specified, and the patch uncovers this bug.
Solution:
- Fix the LB (logic bus) ranges to be 1-to-1 like they should
have always been.
- Provide a 1:1 dma-ranges attribute to the PL110.
- Mark the PL110 display controller as DMA coherent.
This makes the DMA ranges work right and makes the PL110
framebuffer work again.
Fixes: af6f23b88e ("ARM/dma-mapping: use the generic versions of dma_to_phys/phys_to_dma by default")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220926073311.1610568-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We need the USB fixes in here for other follow-on changes to be able to
be applied successfully.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that CONFIG_ARCH_MULTIPLATFORM can be disabled anywhere,
there is a build failure for plat-orion:
arch/arm/plat-orion/irq.c:19:10: fatal error: plat/irq.h: No such file or directory
Make the include path unconditional.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables command-db, ocmem, rpmh and rpmhpd drivers in the
multi_v7_defconfig, used on SDX55, SDX65 and MSM8974. For qcom_defconfig
rmtfs-mem, rpmpd, socinfo and qcom-stats are enables as they are used
across MSM8974, MSM8226, MSM8916 and APQ8084.
Lastly the MAINTAINERS entry is updated to include the qcom_defconfig.
-----BEGIN PGP SIGNATURE-----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=Q4jK
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmMt198ACgkQmmx57+YA
GNn1BQ/9EIFRXXkt/si6e6eLW2y+2RPx6JukdNSWhdB+qFvKkJU5Dar7UNWbGfrI
JANp6tpHIVnCmd+pSHUpmYhraJR6jrO3/r1eHgkxDxyYogakMh22opZpj+lI3nL8
zBQm+SHi9/NuJY2qep8qKzV80Vk3Vq9354ZmOU8apm81FTnD0Sk18I53W01MqFeL
zL+2Vs6Bu/GzykA2V99V6dJHRInp+mUqVrB3J36EXJBb6o5MaJNztyzVskE9DZU9
mu1/9NdCRhpTjfWZgstsLYOMxbKS5SycxxJWC8ZIkqdIYERCjf539DyQkmMkJLOl
eMYX0aClMy5m0PQOgkjPG4tgk5/DPpfVaCFIjFDc8gXB6s45yam5nNT2TpXkt1Yt
IUsaEHv0QTffCMjy721EXJwxLBapx5Mh2snFqjVSssdIOp/gnj6v2rK0Ut/QjtmJ
h8R+AVsy8XE4EBJSs5bGybmcHpH5luE8LqRZ2yc/+0Pync5Fn1G8Yo8Ut6Pn0cVj
26hJVb6rOkNNrtkW38b63xa1IgWSM85M+eAQK+39NdWp6JVwf1KJ0ppfnSCFXp7n
cdZ+dGuVrQSXDinLH/jJgi/hcybH2gF9G5gZfVsMnju3I9M5kvJwR8jJjbJVL6zR
LeJzRExbQ4RaSPbr6GWdsBf2knQIvIFSAFemrPW/PVUNM/NHb5A=
=Sghw
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM defconfig updates for 6.1
This enables command-db, ocmem, rpmh and rpmhpd drivers in the
multi_v7_defconfig, used on SDX55, SDX65 and MSM8974. For qcom_defconfig
rmtfs-mem, rpmpd, socinfo and qcom-stats are enables as they are used
across MSM8974, MSM8226, MSM8916 and APQ8084.
Lastly the MAINTAINERS entry is updated to include the qcom_defconfig.
* tag 'qcom-defconfig-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom: include defconfig in MAINTAINERS
ARM: multi_v7_defconfig: enable more Qualcomm drivers
ARM: qcom_defconfig: enable more Qualcomm drivers
Link: https://lore.kernel.org/r/20220921153734.1314952-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A series of changes for am335x baltos and netcom devices to update nand
transfer type and configure gpio-line-names.
-----BEGIN PGP SIGNATURE-----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=lXnZ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=t/Cb
-----END PGP SIGNATURE-----
Merge tag 'omap-for-6.1/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps
A series of changes for am335x baltos and netcom devices to update nand
transfer type and configure gpio-line-names.
* tag 'omap-for-6.1/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-netcom: add GPIO names for NetCom Plus 2-port devices
ARM: dts: am335x-netcom: add GPIO names for NetCom Plus 8-port devices
ARM: dts: am335x-netcan: add GPIO names for NetCAN Plus device
ARM: dts: am335x-baltos: add GPIO names for ir2110 device
ARM: dts: am335x-baltos: add GPIO names for ir3220 and ir5221 devices
ARM: dts: am335x-baltos: change nand-xfer-type
Link: https://lore.kernel.org/r/pull-1663587735-853102@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Device tree label property should contain label from the box/stick.
Labels for other ports are already specified in DT but wan is missing.
So add missing label for wan port.
Fixes: 26ca8b52d6 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Turris Omnia has GPIO51 exported on pin header U16, which works in S/PDIF
output mode. So define S/PDIF audio output card for this pin.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
S/PDIF function on Armada 38x uses only mpp51 pin. So add spdif-pins mpp
pins section for it. It is needed for boards without i2s.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This commit adds the necessary Device Tree information to enable
audio support on the Armada 385 DB platform. In details it:
* Instantiates the CS42L51 audio codec on the I2C0 bus
* Adds simple-card DT binding for audio on Armada 385 DB
* Adds description for both analog I2S and S/PDIF I/O
* Disabled by default
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Tested-by: Star_Automation <star@marvell.com>
Tested-by: Lior Amsalem <alior@marvell.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This commit adds the description of the I2S controller to the Marvell
Armada 38x SoC's Device Tree, as well as its pin configuration.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Tested-by: Nadav Haklai <nadavh@marvell.com>
Tested-by: Lior Amsalem <alior@marvell.com>
[pali: Fix i2s-pins name]
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Support for Samsung Galaxy E5, E7 and Grand Max is added, with support
for both 32-bit and 64-bit variants. The Samsung Galaxy S4 Mini Value
Edition gains magnetometer support.
MSM8996-based Xiaomi devices gains descriptions of the LPG-based LEDs.
On SA8295P ADP problems arising from regulators being switched into
low-power mode is worked around by removing this ability, for now.
The onboard USB Hub on SC7180 Trogdor is finally described and a few ADC
related updates are introduced.
On SC7280 support for the CPU and LLC bwmon instances are introduced.
Soundwire, audio codecs and sound introduced for a variety of boards.
Using required-opps the USB controllers votes for a minimum corner on
VDD_CX.
The onboard USB Hub Herobrine is described. A new board, the Google
Evoker is added, as is another revision of Herobrine Villager.
On SC8280XP the USB controllers are marked as wakeup-sources, to keep
them powered during suspend. The CRD has HID devices marked as
wakeup-sources to enable resuming the system. In addition to these
changes the alternative touchpad is introduced on the Lenovo ThinkPad
X13s.
SDM845 gains RPMh stats support and the LLCC BWMON is added. For SM6350
interconnect providers and GPI DMA is introduced. A description of the
PM7280b PMIC is added to Fairphone FP4 on SM7225.
With the multi-MSI support added in the PCIe controller, SM8250 gets all
its MSI interrupts added.
UFS ICE and the second SDHCI controller is introduced on SM8450. Support
for the Sony Xperia 1 IV is introduced.
Throughout a variety of platforms the TCSR mutex syscon is replaced with
the MMIO-based binding. TCSR nodes gained proper compatibles and halt
syscon nodes are split out from the mutex ranges.
A range of fixes to align with DT bindings are introduced. Among these
are the changes to the follow the TLMM binding and suffix pinctrl states
with -state and subnodes thereof with -pins, another is a number of
changes transitioning to use -gpios and introduction of proper parent
clock references in various clock providers.
-----BEGIN PGP SIGNATURE-----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=XT9N
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ZHbe
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DTS updates for 6.1
Support for Samsung Galaxy E5, E7 and Grand Max is added, with support
for both 32-bit and 64-bit variants. The Samsung Galaxy S4 Mini Value
Edition gains magnetometer support.
MSM8996-based Xiaomi devices gains descriptions of the LPG-based LEDs.
On SA8295P ADP problems arising from regulators being switched into
low-power mode is worked around by removing this ability, for now.
The onboard USB Hub on SC7180 Trogdor is finally described and a few ADC
related updates are introduced.
On SC7280 support for the CPU and LLC bwmon instances are introduced.
Soundwire, audio codecs and sound introduced for a variety of boards.
Using required-opps the USB controllers votes for a minimum corner on
VDD_CX.
The onboard USB Hub Herobrine is described. A new board, the Google
Evoker is added, as is another revision of Herobrine Villager.
On SC8280XP the USB controllers are marked as wakeup-sources, to keep
them powered during suspend. The CRD has HID devices marked as
wakeup-sources to enable resuming the system. In addition to these
changes the alternative touchpad is introduced on the Lenovo ThinkPad
X13s.
SDM845 gains RPMh stats support and the LLCC BWMON is added. For SM6350
interconnect providers and GPI DMA is introduced. A description of the
PM7280b PMIC is added to Fairphone FP4 on SM7225.
With the multi-MSI support added in the PCIe controller, SM8250 gets all
its MSI interrupts added.
UFS ICE and the second SDHCI controller is introduced on SM8450. Support
for the Sony Xperia 1 IV is introduced.
Throughout a variety of platforms the TCSR mutex syscon is replaced with
the MMIO-based binding. TCSR nodes gained proper compatibles and halt
syscon nodes are split out from the mutex ranges.
A range of fixes to align with DT bindings are introduced. Among these
are the changes to the follow the TLMM binding and suffix pinctrl states
with -state and subnodes thereof with -pins, another is a number of
changes transitioning to use -gpios and introduction of proper parent
clock references in various clock providers.
* tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (136 commits)
arm64: dts: qcom: sc7280: Add required-opps for USB
arm64: dts: qcom: sm8450: fix UFS PHY serdes size
arm64: dts: qcom: ipq8074: fix PCIe PHY serdes size
arm64: dts: qcom: sa8295p-adp: add missing gpio-ranges in PMIC GPIOs
arm64: dts: qcom: sa8295p-adp: add fallback compatible to PMIC GPIOs
arm64: dts: qcom: msm8996-xiaomi: align PMIC GPIO pin configuration with DT schema
arm64: dts: qcom: msm8994-msft-lumia-octagon: align resin node name with bindings
arm64: dts: qcom: pmi8994: add missing MPP compatible fallback
dt-bindings: pci: QCOM Add missing sc7280 aggre0, aggre1 clocks
arm64: dts: qcom: sc7280: Add missing aggre0, aggre1 clocks
arm64: dts: qcom: sc7280-villager: Adjust LTE SKUs
dt-bindings: arm: qcom: Adjust LTE SKUs for sc7280-villager
arm64: dts: qcom: sc7280-herobrine: Add nodes for onboard USB hub
arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
arm64: dts: qcom: align SDHCI reg-names with DT schema
arm64: dts: qcom: sm8250: provide additional MSI interrupts
arm64: dts: qcom: msm8996: add #clock-cells and XO clock to the HDMI PHY node
arm64: dts: qcom: Use WCD9335 DT bindings
arm64: dts: qcom: msm8994: switch TCSR mutex to MMIO
arm64: dts: qcom: ipq6018: switch TCSR mutex to MMIO
...
Link: https://lore.kernel.org/r/20220921234854.1343238-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds extends the IPQ8064 support with the two variants IPQ8062 and
IPQ8065. MSM8974 and APQ8084 gained RPM stats support.
The Audio DSP remoteproc was added to MSM8226 and enabled for ASUS
ZenWatch 2 and LG G Watch R.
MSM8660 gained one I2C and one SPI bus and the APQ8060 Dragonboard got
the TMA340 Touchscreen described.
A wide range of improvements are done throughout the DTS files to align
with bindings, fix issues and improve structure on things.
-----BEGIN PGP SIGNATURE-----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=W/0i
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmMtxCUACgkQmmx57+YA
GNmPIw//S86wvFZwcwn4k439/lpd3u3yn+sXf2wTsguOWwm8svrvzfuqMFD2wSnU
vdP9pMCGwQdAUDgQn/r/kkCh/wSUz6oZB+LO+kMGNvIH9Rn2Fmcui4UKAtPi1Xed
DrYj+Ajz4NbtTFhYWvg4FKDFZ5GoGWQ3RCY/KWRBeSs41jVgpXEP97d41oMFZ7bz
1giMkKfYQERtteh5f5lN9hiF9imcyLSuilzMgP1qJzA8N8ELBspEZIgeczUfZRmT
XScExSeHIs9Gqk/2ZbTjTMCb/gDAMEnBf0aOG0vpi8oMFz03xfN+kqTAi9bmvwZJ
UpCooHfmoyWSZTA3FADDECyvfcRxEncuew5cpmaFfB9itrZjfLJCwDemAGmzhJGP
eRVmLwbYoFcuULH+ga7FwK1+W2p647wNJ5uxKeC72HmRX6guHo2gebRYK+6fZS9f
AskXuOo5nMNoYHihPx3lKSdc8QA1gF0momOrCX7C53rlJUde/OrsD+HZsMXsR+pU
suQA/QVGm3f9VxH8N9iH3MBZwAa8gdeUxALw6bPwELmiPBcZ/wt0W7FZlkkG0lfb
h14ymn5haqcK7y+sfYA9bo+BWqhxCNujaxI3Bg8u5+qkgaSIjTbi82qgrSq3osaR
84YJ5QB4gVsLiCWUCCxWhqzXC2cuZ5WBDLdSE+3dVPLH6cPsVqU=
=jPGF
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM DTS updates for 6.1
This adds extends the IPQ8064 support with the two variants IPQ8062 and
IPQ8065. MSM8974 and APQ8084 gained RPM stats support.
The Audio DSP remoteproc was added to MSM8226 and enabled for ASUS
ZenWatch 2 and LG G Watch R.
MSM8660 gained one I2C and one SPI bus and the APQ8060 Dragonboard got
the TMA340 Touchscreen described.
A wide range of improvements are done throughout the DTS files to align
with bindings, fix issues and improve structure on things.
* tag 'qcom-dts-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (35 commits)
ARM: dts: qcom: apq8026-lg-lenok: Enable ADSP
ARM: dts: qcom: apq8026-asus-sparrow: Enable ADSP
ARM: dts: qcom: msm8226: Add ADSP node
ARM: dts: qcom: ipq8064: pad addresses to 8 digit
ARM: dts: qcom: ipq8064: reorganize node order and sort them
ARM: dts: qcom: align SDHCI clocks with DT schema
ARM: dts: qcom: align SDHCI reg-names with DT schema
ARM: dts: qcom: msm8960: add clocks to the MMCC device node
ARM: dts: qcom: apq8064: add clocks to the MMCC device node
ARM: dts: qcom: msm8960: add clocks to the GCC device node
ARM: dts: qcom: apq8064: add clocks to the GCC device node
ARM: dts: qcom: msm8960: add clocks to the LCC device node
ARM: dts: qcom: apq8064: add clocks to the LCC device node
ARM: dts: qcom: msm8226: switch TCSR mutex to MMIO
ARM: dts: qcom: apq8084: switch TCSR mutex to MMIO
ARM: dts: qcom: msm8660: fix node names for fixed clocks
ARM: dts: qcom: msm8660: add pxo/cxo clocks to the GCC node
ARM: dts: qcom: apq8060-dragonboard: Add TMA340 to APQ8060 DragonBoard
ARM: dts: qcom: msm8660: Add GSBI3 I2C bus
ARM: dts: qcom: msm8660: Add GSBI1 SPI bus
...
Link: https://lore.kernel.org/r/20220921222619.1338380-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Alexander Stein to add missing properties for i.MX6 SRAM.
- Drop 'interrupts' property when 'interrupts-extended' is present. This
fixes a dtbs_check warning with i.MX6 DT.
- Update device trees to use generic name 'dma-controller' for SDMA.
- A set of changes from Krzysztof Kozlowski to align SPI, LED and
gpio-keys node name with dtschema.
- A series of indentation and white-space cleanups from Marcel Ziswiler
to address various checkpatch warnings.
- Add DDR pinmux defines to VF610 DT header.
- A couple of changes from Peng Fan to update clock-names and add IPG
clock for i.MX7ULP LPI2C devices.
- Improve device tree structure for Kontron i.MX6UL/ULL based boards.
- A series of changes from Tim Harvey to add CAN regulator for Gateworks
i.MX6QDL boards.
- Various small and random board specific updates.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmMmkqkUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5jrAf+K3D9RtMWlGY1zrqv6QLWgBbeNaBt
wtICvLyaaypcPqZ/WzgfgMgJf9tUwDzkrzewyRqG4aHBQvY0xOlwvUFH/OA2C4mA
K0/FYR6GK4rIlZpOW1Rkj3K0U0GrtxUsF9uXLFhQShJWWVn+gpjZmcZ3hEVwRyIR
eNEKsMmwV0UZhT1JZYZ/U+sQD8yfaNPLLVM+doLwcavQavNGQyDRLdpAZ6AuMANz
SckcGC4tI3mkPsTBweshemSDe14XILrnDgei1429AfLd+vb48l9FPUF5/oOKJRt7
Zb1uQmXfCwyUJx7pU3tJZBUHAAGqsupniYtpxYxH8PL46lSulmSDpnMLyA==
=wloQ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7v6C
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree change for 6.1
- A series from Alexander Stein to add missing properties for i.MX6 SRAM.
- Drop 'interrupts' property when 'interrupts-extended' is present. This
fixes a dtbs_check warning with i.MX6 DT.
- Update device trees to use generic name 'dma-controller' for SDMA.
- A set of changes from Krzysztof Kozlowski to align SPI, LED and
gpio-keys node name with dtschema.
- A series of indentation and white-space cleanups from Marcel Ziswiler
to address various checkpatch warnings.
- Add DDR pinmux defines to VF610 DT header.
- A couple of changes from Peng Fan to update clock-names and add IPG
clock for i.MX7ULP LPI2C devices.
- Improve device tree structure for Kontron i.MX6UL/ULL based boards.
- A series of changes from Tim Harvey to add CAN regulator for Gateworks
i.MX6QDL boards.
- Various small and random board specific updates.
* tag 'imx-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (40 commits)
ARM: dts: imx6qdl-gw54xx: add CAN regulator
ARM: dts: imx6qdl-gw53xx: add CAN regulator
ARM: dts: imx6qdl-gw52xx: add CAN regulator
ARM: dts: imx: update sdma node name format
ARM: dts: imx6: skov: migrate to resistive-adc-touch
ARM: dts: imx6sx-udoo-neo: don't use multiple blank lines
ARM: dts: imx6sl: use tabs for code indent
ARM: dts: imx6sx: add missing properties for sram
ARM: dts: imx6sll: add missing properties for sram
ARM: dts: imx6sl: add missing properties for sram
ARM: dts: imx6qp: add missing properties for sram
ARM: dts: imx6dl: add missing properties for sram
ARM: dts: imx6q: add missing properties for sram
ARM: dts: imx7ulp: Add IPG clock for lpi2c
ARM: dts: imx7ulp: update the LPI2C clock-names
ARM: dts: vf610: ddr pinmux
ARM: dts: imx6qdl-dhcom: Move IPU iomux node from PDK2 to SoM file
ARM: dts: imx6ul-kontron: Add imx6ull-kontron-bl to Makefile
ARM: dts: imx6ul-kontron: Simplify devicetree structure
ARM: dts: vf610: align SPI node name with dtschema
...
Link: https://lore.kernel.org/r/20220918092806.2152700-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A fix to remove usb4 from am5748 as it does not exist on the SoC, and
a fix for am335x mmc dma that wired direct and should not use the xbar.
Note that the am5748 fix depends on the recent deferred probe regression
fixes to boot. I ended up picking the merge commit to base it on as it
describes what got fixed quite nicely rather than a -rc tag.
-----BEGIN PGP SIGNATURE-----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=p5BT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=M5HN
-----END PGP SIGNATURE-----
Merge tag 'omap-for-6.0/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Two fixes for omaps
A fix to remove usb4 from am5748 as it does not exist on the SoC, and
a fix for am335x mmc dma that wired direct and should not use the xbar.
Note that the am5748 fix depends on the recent deferred probe regression
fixes to boot. I ended up picking the merge commit to base it on as it
describes what got fixed quite nicely rather than a -rc tag.
* tag 'omap-for-6.0/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am5748: keep usb4_tm disabled
ARM: dts: am33xx: Fix MMCHS0 dma properties
Link: https://lore.kernel.org/r/pull-1663140667-273537@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Another set of fixes for fixes for the soc tree:
- A fix for the interrupt number on at91/lan966 ethernet PHYs
- A second round of fixes for NXP i.MX series, including a couple
of build issues, and board specific DT corrections on
TQMa8MPQL, imx8mp-venice-gw74xx and imx8mm-verdin for reliability
and partially broken functionality.
- Several fixes for Rockchip SoCs, addressing a USB issue on BPI-R2-Pro,
wakeup on Gru-Bob and reliability of high-speed SD cards, among
other minor issues.
- A fix for a long-running naming mistake that prevented the moxart mmc
driver from working at all.
- Multiple Arm SCMI firmware fixes for hardening some corner cases.
-----BEGIN PGP SIGNATURE-----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=fI2K
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of fixes for fixes for the soc tree:
- A fix for the interrupt number on at91/lan966 ethernet PHYs
- A second round of fixes for NXP i.MX series, including a couple of
build issues, and board specific DT corrections on TQMa8MPQL,
imx8mp-venice-gw74xx and imx8mm-verdin for reliability and
partially broken functionality
- Several fixes for Rockchip SoCs, addressing a USB issue on
BPI-R2-Pro, wakeup on Gru-Bob and reliability of high-speed SD
cards, among other minor issues
- A fix for a long-running naming mistake that prevented the moxart
mmc driver from working at all
- Multiple Arm SCMI firmware fixes for hardening some corner cases"
* tag 'soc-fixes-6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation
ARM: dts: lan966x: Fix the interrupt number for internal PHYs
arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu port
arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity
dt-bindings: memory-controllers: fsl,imx8m-ddrc: drop Leonard Crestez
arm64: dts: tqma8mqml: Include phy-imx8-pcie.h header
arm64: defconfig: enable ARCH_NXP
arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarm
ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer
arm64: dts: imx8mm-verdin: extend pmic voltages
arm64: dts: rockchip: Remove 'enable-active-low' from rk3566-quartz64-a
arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-puma
arm64: dts: rockchip: fix property for usb2 phy supply on rk3568-evb1-v10
arm64: dts: rockchip: fix property for usb2 phy supply on rock-3a
arm64: dts: imx8ulp: add #reset-cells for pcc
arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOs
arm64: dts: imx8mn: remove GPU power domain reset
arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHz
arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo
arm64: dts: rockchip: fix upper usb port on BPI-R2-Pro
...
MT_MEMORY_RO is introduced by commit 598f0a99fa ("ARM: 9210/1:
Mark the FDT_FIXED sections as shareable"), which is a readonly
memory type for FDT area, but there are some different between
ARM_LPAE and non-ARM_LPAE, we need to setup PMD_SECT_AP2 and
L_PMD_SECT_RDONLY for MT_MEMORY_RO when ARM_LAPE enabled.
non-ARM_LPAE 0xff800000-0xffa00000 2M PGD KERNEL ro NX SHD
ARM_LPAE 0xff800000-0xffc00000 4M PMD RW NX SHD
ARM_LPAE+fix 0xff800000-0xffc00000 4M PMD ro NX SHD
Fixes: 598f0a99fa ("ARM: 9210/1: Mark the FDT_FIXED sections as shareable")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
After ARM supports p4d page tables, the pg_level for note_page()
in walk_pmd() should be 4, not 3, fix it.
Fixes: 84e6ffb2c4 ("arm: add support for folded p4d page tables")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
This patch fixes the following build error:
In file included from ./include/linux/io.h:13,
from ./arch/arm/mach-rpc/include/mach/uncompress.h:9,
from arch/arm/boot/compressed/misc.c:31:
./arch/arm/include/asm/io.h:85:22: error: conflicting types for ‘__raw_writeb’
85 | #define __raw_writeb __raw_writeb
| ^~~~~~~~~~~~
./arch/arm/include/asm/io.h:86:20: note: in expansion of macro ‘__raw_writeb’
86 | static inline void __raw_writeb(u8 val, volatile void __iomem *addr)
| ^~~~~~~~~~~~
In file included from arch/arm/boot/compressed/misc.c:26:
arch/arm/boot/compressed/misc-ep93xx.h:13:20: note: previous definition of ‘__raw_writeb’ was here
13 | static inline void __raw_writeb(unsigned char value, unsigned int ptr)
| ^~~~~~~~~~~~
To: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-kernel@lists.infradead.org
Fixes: 0361c7e504 ("ARM: ep93xx: multiplatform support")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Function show_regs() is usually called in interrupt handler or exception
handler, it prints the registers specified by the parameter 'regs', then
dump the stack traces. Although not explicitly documented, dump the stack
traces based on'regs' seems to make the most sense. Although dump_stack()
can finally dump the desired content, because 'regs' are saved by the
entry of current interrupt or exception. In the following example we can
see: 1) The backtrace of interrupt or exception handler is not expected,
it causes confusion. 2) Something is printed repeatedly. The line with
the kernel version "CPU: 0 PID: 70 Comm: test0 Not tainted 5.19.0+ #8",
the registers saved in "Exception stack" which 'regs' actually point to.
For example:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 0-....: (499 ticks this GP) idle=379/1/0x40000002 softirq=91/91 fqs=249
(t=500 jiffies g=-911 q=13 ncpus=4)
CPU: 0 PID: 70 Comm: test0 Not tainted 5.19.0+ #8
Hardware name: ARM-Versatile Express
PC is at ktime_get+0x4c/0xe8
LR is at ktime_get+0x4c/0xe8
pc : 8019a474 lr : 8019a474 psr: 60000013
sp : cabd1f28 ip : 00000001 fp : 00000005
r10: 527bf1b8 r9 : 431bde82 r8 : d7b634db
r7 : 0000156e r6 : 61f234f8 r5 : 00000001 r4 : 80ca86c0
r3 : ffffffff r2 : fe5bce0b r1 : 00000000 r0 : 01a431f4
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: 6121406a DAC: 00000051
CPU: 0 PID: 70 Comm: test0 Not tainted 5.19.0+ #8 <-----------start----------
Hardware name: ARM-Versatile Express |
unwind_backtrace from show_stack+0x10/0x14 |
show_stack from dump_stack_lvl+0x40/0x4c |
dump_stack_lvl from rcu_dump_cpu_stacks+0x10c/0x134 |
rcu_dump_cpu_stacks from rcu_sched_clock_irq+0x780/0xaf4 |
rcu_sched_clock_irq from update_process_times+0x54/0x74 |
update_process_times from tick_periodic+0x3c/0xd4 |
tick_periodic from tick_handle_periodic+0x20/0x80 worthless
tick_handle_periodic from twd_handler+0x30/0x40 or
twd_handler from handle_percpu_devid_irq+0x8c/0x1c8 duplicated
handle_percpu_devid_irq from generic_handle_domain_irq+0x24/0x34 |
generic_handle_domain_irq from gic_handle_irq+0x74/0x88 |
gic_handle_irq from generic_handle_arch_irq+0x34/0x44 |
generic_handle_arch_irq from call_with_stack+0x18/0x20 |
call_with_stack from __irq_svc+0x98/0xb0 |
Exception stack(0xcabd1ed8 to 0xcabd1f20) |
1ec0: 01a431f4 00000000 |
1ee0: fe5bce0b ffffffff 80ca86c0 00000001 61f234f8 0000156e d7b634db 431bde82 |
1f00: 527bf1b8 00000005 00000001 cabd1f28 8019a474 8019a474 60000013 ffffffff |
__irq_svc from ktime_get+0x4c/0xe8 <---------end--------------
ktime_get from test_task+0x44/0x110
test_task from kthread+0xd8/0xf4
kthread from ret_from_fork+0x14/0x2c
Exception stack(0xcabd1fb0 to 0xcabd1ff8)
1fa0: 00000000 00000000 00000000 00000000
1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
After replacing dump_stack() with dump_backtrace():
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 0-....: (500 ticks this GP) idle=8f7/1/0x40000002 softirq=129/129 fqs=241
(t=500 jiffies g=-915 q=13 ncpus=4)
CPU: 0 PID: 69 Comm: test0 Not tainted 5.19.0+ #9
Hardware name: ARM-Versatile Express
PC is at ktime_get+0x4c/0xe8
LR is at ktime_get+0x4c/0xe8
pc : 8019a494 lr : 8019a494 psr: 60000013
sp : cabddf28 ip : 00000001 fp : 00000002
r10: 0779cb48 r9 : 431bde82 r8 : d7b634db
r7 : 00000a66 r6 : e835ab70 r5 : 00000001 r4 : 80ca86c0
r3 : ffffffff r2 : ff337d39 r1 : 00000000 r0 : 00cc82c6
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: 611d006a DAC: 00000051
ktime_get from test_task+0x44/0x110
test_task from kthread+0xd8/0xf4
kthread from ret_from_fork+0x14/0x2c
Exception stack(0xcabddfb0 to 0xcabddff8)
dfa0: 00000000 00000000 00000000 00000000
dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The .data.rel.ro.local section has the same semantics as .data.rel.ro
here, so include it in the .rodata section of the decompressor.
Additionally since the .printk_index section isn't usable outside of
the core kernel, discard it in the decompressor. Avoids these warnings:
arm-linux-gnueabi-ld: warning: orphan section `.data.rel.ro.local' from `arch/arm/boot/compressed/fdt_rw.o' being placed in section `.data.rel.ro.local'
arm-linux-gnueabi-ld: warning: orphan section `.printk_index' from `arch/arm/boot/compressed/fdt_rw.o' being placed in section `.printk_index'
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-mm/202209080545.qMIVj7YM-lkp@intel.com
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
make dtbs_check:
usb-phy@e6590100: '#phy-cells' is a required property
From schema: dtschema/schemas/phy/phy-provider.yaml
The R-Car Gen2 USB PHY device nodes do not represent USB PHYs
theirselves, and thus do not have "#phy-cells" properties. Fix the
warning by renaming them from "usb-phy" to "usb-phy-controller".
Rename their child nodes from "usb-channel" to "usb-phy", as these do
represent USB PHYs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/6442b4042e26537abc8632c4772f8201685f1f1f.1663165098.git.geert+renesas@glider.be
Don't automatically select the SOC_BUS config option as we already have
automatically selected it as part of the SOC_RENESAS config option [0]
as renesas-soc.c [1] uses the APIs provided by SOC_BUS config option.
[0] drivers/soc/renesas/Kconfig
[1] drivers/soc/renesas/renesas-soc.c
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220915233852.415407-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
It contains:
- new SAMA5D3 based board, namely SAMA5D3-EDS
- adjustments to pass the DT binding validations
- disable AES on some LAN966 based boards as they are reserverd by
secure OS
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCYyQybAAKCRCejrg/N2X7
/R+wAQCDcL8RVW4opVAOjDkMOCnVxq8M+pjx+jVOnIPIRsGnNwEAxZ9sX5gP8HM3
ygUF/qoc3bUxXAN/YH6HfWIpYszV8wY=
=9Ge/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=49Pi
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for v6.1 #2
It contains:
- new SAMA5D3 based board, namely SAMA5D3-EDS
- adjustments to pass the DT binding validations
- disable AES on some LAN966 based boards as they are reserverd by
secure OS
* tag 'at91-dt-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
spi: dt-bindings: atmel,at91rm9200-spi: Add DMA related properties
ARM: dts: at91: Add `atmel,usart-mode` required property to serial nodes
ARM: dts: at91: sam9x60ek: Add DBGU compatibles to uart1
ARM: dts: at91: sama7g5: Swap rx and tx for spi11
dts: arm: at91: Add SAMA5D3-EDS Board
dt-bindings: arm: at91: Add info on SAMA5D3-EDS
ARM: dts: lan966x: disable aes
Link: https://lore.kernel.org/r/20220916105407.1287452-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The GW54xx has a transceiver with a STBY pin connected to an IMX6 GPIO.
Configure this as a regulator to drive it low when CAN is in use.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GW53xx has a transceiver with a STBY pin connected to an IMX6 GPIO.
Configure this as a regulator to drive it low when CAN is in use.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GW52xx has a transceiver with a STBY pin connected to an IMX6 GPIO.
Configure this as a regulator to drive it low when CAN is in use.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
My cleanup patch allowed enabling PCI on MMU-less builds,
which breaks for at least one driver and is never required:
In file included from include/linux/irqchip/arm-gic-v3.h:604,
from drivers/pci/controller/pcie-iproc.c:17:
arch/arm/include/asm/arch_gicv3.h: In function 'write_ICC_EOIR1_EL1':
arch/arm/include/asm/arch_gicv3.h:44:9: error: implicit declaration of function 'write_sysreg' [-Werror=implicit-function-declaration]
Fixes: 6fd09c9afa ("ARM: Kconfig: clean up platform selection")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are two options for platform device PATA support:
PATA_PLATFORM: Generic platform device PATA support
PATA_OF_PLATFORM: OpenFirmware platform device PATA support
If an architecture allows the generic platform device PATA support, it
shall select HAVE_PATA_PLATFORM. Then, Generic platform device PATA support
is available and can be selected.
If an architecture has OpenFirmware support, which it indicates by
selecting OF, OpenFirmware platform device PATA support is available
and can be selected.
If OpenFirmware platform device PATA support is selected, then the
functionality (code files) from Generic platform device PATA support needs
to be integrated in the kernel build for the OpenFirmware platform device
PATA support to work. Select PATA_PLATFORM in PATA_OF_PLATFORM to make sure
the needed files are added in the build.
So, architectures with OpenFirmware support, do not need to additionally
select HAVE_PATA_PLATFORM. It is only needed by architecture that want the
non-OF pata-platform module.
Reflect this way of intended use of config symbols in the ata Kconfig and
adjust all architecture definitions.
This follows the suggestion from Arnd Bergmann (see Link).
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/all/4b33bffc-2b6d-46b4-9f1d-d18e55975a5a@www.fastmail.com/
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Add the missing required DT property `atmel,usart-mode` to the serial
nodes of Atmel/Microchip DT files.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220913142205.162399-4-sergiu.moga@microchip.com
Maintain consistency among the compatibles of the serial nodes of
sam9x60ek and highlight the incremental characteristic of its serial
IP's by making sure that all serial nodes contain both the sam9x60
and sam9260 usart/dbgu compatibles.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220913142205.162399-3-sergiu.moga@microchip.com
Swap the rx and tx of the DMA related DT properties of the spi11 node
in order to maintain consistency across Microchip/Atmel SoC files.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220913142205.162399-2-sergiu.moga@microchip.com
Now that everything except StrongARM is unified under
CONFIG_ARCH_MULTIPLATFORM, the option is rather meaningless
in its current form.
Rework the Kconfig logic to make this useful again, similar
to the way that RISC-V has CONFIG_NONPORTABLE (with the
opposite polarity), this now controls the visibility of
options that get in the way of building generic kernels,
while allowing custom kernels.
One side-effect is that 'randconfig' builds now rarely hit
strongarm machines, rather than testing them three quarters
of the time.
* 'arm-multiplatform-cleanup' of https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: make ARCH_MULTIPLATFORM user-visible
ARM: fix XIP_KERNEL dependencies
ARM: Kconfig: clean up platform selection
ARM: simplify machdirs/platdirs handling
ARM: remove obsolete Makefile.boot infrastructure
for 6.1, please pull the following:
- Rafal improves the BCM5301X PCIe DT nodes schema validation by
flagging the PCIe controller with a missing "device_type" property
- William merges BCM4908 within BCMBCA since this chip is part of the
Broadcom Broadband Carrier Access group and follows the architecture of
those chips
-----BEGIN PGP SIGNATURE-----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=JcYR
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=4L+j
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.1/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoC Device Tree updates
for 6.1, please pull the following:
- Rafal improves the BCM5301X PCIe DT nodes schema validation by
flagging the PCIe controller with a missing "device_type" property
- William merges BCM4908 within BCMBCA since this chip is part of the
Broadcom Broadband Carrier Access group and follows the architecture of
those chips
* tag 'arm-soc/for-6.1/devicetree' of https://github.com/Broadcom/stblinux:
arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA
arm64: dts: Add BCM4908 generic board dts
arm64: dts: Move BCM4908 dts to bcmbca folder
arm64: dts: bcmbca: update BCM4908 board dts files
dt-bindings: arm64: bcmbca: Update BCM4908 description
dt-bindings: arm64: bcmbca: Merge BCM4908 into BCMBCA
ARM: dts: BCM5301X: Add basic PCI controller properties
Link: https://lore.kernel.org/r/20220915023044.2350782-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It contains a fix for LAN966 SoCs that corrects the interrupt
number for internal PHYs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCYyLxGAAKCRCejrg/N2X7
/Y3oAQDQ64mW15h0ZAgoHWpxVgIA2/h1RKvjphg7AgXhtsS1DgD/U94AFR3IlrTN
BmDUUDutxXKXlJgIUy4zEdML4bMERQU=
=DFFW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=HFlS
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes-6.0-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
AT91 fixes for 6.0 #2
It contains a fix for LAN966 SoCs that corrects the interrupt
number for internal PHYs.
* tag 'at91-fixes-6.0-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: lan966x: Fix the interrupt number for internal PHYs
Link: https://lore.kernel.org/r/20220915105833.4159850-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The customized reserved memory for ADSP is already configured, so we
just need to enable the node.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220423155059.660387-4-luca@z3ntu.xyz
Footbridge is the last Arm platform that has its own
__virt_to_bus()/__bus_to_virt()/phys_to_dma()/dma_to_phys() abstraction,
but this is just a simple offset now.
For PCI devices, the offset that is programmed into the PCI bridge must
also be set in each device using dma_direct_set_offset(). As Arm does
not have a pcibios_bus_add_device() helper yet, just use a bus notifier
for this.
For the ISA DMA, drivers now pass a non-translated physical address into
set_dma_addr(), so they have to be converted back with the corresponding
isa_bus_to_virt() function and then into the correct bus address with
the offset using the isa_dma_dev.
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable mac3 controller in Elbert dts: Elbert MAC3 is connected to the
BCM53134P onboard switch's IMP_RGMII port directly (fixed link, no PHY
between BMC MAC and BCM53134P).
Note: BMC's mdio0 controller is connected to BCM53134P's MDIO interface,
and the MDIO channel will be enabled later, when BCM53134 is added to
"bcm53xx" DSA driver.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The SAMA5D3-EDS board is an Ethernet Development Platform allowing for
evaluating many Microchip ethernet switch and PHY products. Various
daughter cards can connect via an RGMII connector or an RMII connector.
The EDS board is not intended for stand-alone use and has no ethernet
capabilities when no daughter board is connected. As such, this device
tree is intended to be used with a DT overlay defining the add-on board.
To better ensure consistency, some items are defined here as a form of
documentation so that all add-on overlays will use the same terms.
Link: https://www.microchip.com/en-us/development-tool/SAMA5D3-ETHERNET-DEVELOPMENT-SYSTEM
Signed-off-by: Jerry Ray <jerry.ray@microchip.com>
[claudiu.beznea: s/gpio-inputs/gpio-keys in at91-sama5d3_eds.dts]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220909163022.13022-2-jerry.ray@microchip.com
Disable AES node on lan966x pcb8290, pcb891 and pcb8309 because these
boards have lan966x that uses secure OS which reserves the AES block.
Therefore it can't be exposed to non-secure world.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220908070451.3730608-1-horatiu.vultur@microchip.com
Pad reg addresses to 8 digit to make sorting easier.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220718153815.29414-2-ansuelsmth@gmail.com
Krzysztof Kozlowski