Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure that s390 appears to be a big endian machine by defining
this config option.
Without this s390 appears to be little endian as seen by e.g. the
recordmount script: "perl ./scripts/recordmcount.pl "s390" "little"
"64""
This has no practical impact within the script since the endian
variable is only evaluated for mips. However there are already a
couple of common code places which evaluate this config option. None
of them is relevant for s390 currently though.
To avoid any issues in the future (and fix the recordmcount oddity)
add the new config option.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
arch_spin_lock_wait_flags() checks if a spinlock is not held before
trying a compare and swap instruction. If the lock is unlocked it
tries the compare and swap instruction, however if a different cpu
grabbed the lock in the meantime the instruction will fail as
expected.
Subsequently the arch_spin_lock_wait_flags() incorrectly tries to
figure out if the cpu that holds the lock is running. However it is
using the wrong cpu number for this (-1) and then will also yield the
current cpu to the wrong cpu.
Fix this by adding a missing continue statement.
Fixes: 470ada6b1a ("s390/spinlock: refactor arch_spin_lock_wait[_flags]")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
dcssblk_remove_store() holds the dcssblk_devices_sem semaphore while
calling device_unregister(), which in turn tries to acquire the kernfs
kn->dev_map rwsem for the device sysfs subtree. The same rwsem is also
acquired when using the per-device sysfs attributes in the device sub-tree,
and the attribute handlers then also acquire the dcssblk_devices_sem.
This can lead to a deadlock when removing a DCSS while concurrently
reading from / writing to one of its sysfs attributes. The following
lockdep warning hinted towards the issue (CPU0 = dcssblk_remove_store,
CPU1 = dcssblk_shared_store):
[ 76.496047] Possible unsafe locking scenario:
[ 76.496054] CPU0 CPU1
[ 76.496059] ---- ----
[ 76.496087] lock(&dcssblk_devices_sem);
[ 76.496090] lock(s_active#175);
[ 76.496106] lock(&dcssblk_devices_sem);
[ 76.496110] lock(s_active#175);
[ 76.496115]
*** DEADLOCK ***
Fix this by releasing the dcssblk_devices_sem semaphore, which only
protects internal DCSS data, before calling device_unregister().
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
If fan_get_status() fails then "s" is not initialized. Tweak the error
handling a bit to silence this warning.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Presumably "pss_period" and "ioss_period" can't both be zero, but this
function is never called so we can't infer that using static analysis
alone.
Silence the warning by setting "ret" to zero.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
If acpi_evaluate_integer() fails then "lret" isn't initialized. I've
tweaked the error handling to avoid this issue.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Starting from commit e36f620428(block: split bios to max possible length),
block core starts to split bio in the middle of bvec.
Unfortunately loop dio/aio doesn't consider this situation, and
always treat 'iter.iov_offset' as zero. Then filesystem corruption
is observed.
This patch figures out the offset of the base bvevc via
'bio->bi_iter.bi_bvec_done' and fixes the issue by passing the offset
to iov iterator.
Fixes: e36f620428 (block: split bios to max possible length)
Cc: Keith Busch <keith.busch@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org (4.5)
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Prevent information from leaking to userspace by doing a memset to 0 of
the export state structure before setting the structure values and copying
it. This prevents un-initialized padding areas from being copied into the
export area.
Cc: <stable@vger.kernel.org> # 3.14.x-
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In sha_complete_job, incorrect mcryptd_hash_request_ctx pointer is used
when check and complete other jobs. If the memory of first completed req
is freed, while still completing other jobs in the func, kernel will
crash since NULL pointer is assigned to RIP.
Cc: <stable@vger.kernel.org>
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The output buffer length has to be at least as big as the key_size.
It is then updated to the actual output size by the implementation.
Cc: <stable@vger.kernel.org>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 19e6e5e539 ("ARM: 8547/1: dma-mapping: store buffer
information") allocates a structure meant for internal buffer management
with the GFP flags of the buffer itself. This can trigger the following
safeguard in the slab/slub allocator:
if (unlikely(flags & GFP_SLAB_BUG_MASK)) {
pr_emerg("gfp: %un", flags & GFP_SLAB_BUG_MASK);
BUG();
}
Fix this by filtering the flags that make the slab allocator unhappy.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Currently the tun device accounting uses dev->stats without applying any
kind of protection, regardless that accounting happens in preemptible
process context.
This patch move the tun stats to a per cpu data structure, and protect
the updates with u64_stats_update_begin()/u64_stats_update_end() or
this_cpu_inc according to the stat type. The per cpu stats are
aggregated by the newly added ndo_get_stats64 ops.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull x86 fixes from Ingo Molnar:
"Misc fixes: a binutils fix, an lguest fix, an mcelog fix and a missing
documentation fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Avoid using object after free in genpool
lguest, x86/entry/32: Fix handling of guest syscalls using interrupt gates
x86/build: Build compressed x86 kernels as PIE
x86/mm/pkeys: Add missing Documentation
Pull mm gup cleanup from Ingo Molnar:
"This removes the ugly get-user-pages API hack, now that all upstream
code has been migrated to it"
("ugly" is putting it mildly. But it worked.. - Linus)
* 'mm-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mm/gup: Remove the macro overload API migration helpers from the get_user*() APIs
- stable@ fix for DM cache metadata's READ_LOCK macros that were
incorrectly returning error if the block manager was in read-only
mode; also cleanup multi-statement macros to use do {} while(0)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXEA8BAAoJEMUj8QotnQNauNoH/i5bVVPZTMKA3wzCpziuP08X
V5E9nLhd+Lvng05AZLsrTeIdvDfS7eAPQyFkPY9NpvzoJEAL0ft6bjGdaDTH090u
Y4mn08BcCwCzaJL41u43TGe3+iRZfUA/W7uu80SSaTuKq7EFeRha+LfyOUCwrNcT
P5LEPsl7EKhan3K3+9BrnX3IPG1MwswDAt9Sw0e83cyhFH5Xzy5AkygaSgHSamvf
/LJ3Hid8kCbdGseODJQ+sVg957+5H4mpZ3VUaTek/+DurCPpMFCxNQJTv2nxTd4h
AiEh+ed/RGzAP8hrZdtQTqKjc6ILiR0tRCtYX9WHDXLklkiJ5ZGKMgKyyrZYrzo=
=lzmV
-----END PGP SIGNATURE-----
Merge tag 'dm-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- fix a 4.6-rc1 bio-based DM 'struct dm_target_io' leak in an error
path
- stable@ fix for DM cache metadata's READ_LOCK macros that were
incorrectly returning error if the block manager was in read-only
mode; also cleanup multi-statement macros to use do {} while(0)
* tag 'dm-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros
dm: fix dm_target_io leak if clone_bio() returns an error
A single one-line fix to turn the regmap cache from an RB-tree to a flat
cache to avoid lockdep and abort issues.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=T3Vh
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fix from Thierry Reding:
"A single one-line fix to turn the regmap cache from an RB-tree to a
flat cache to avoid lockdep and abort issues"
* tag 'pwm/for-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: fsl-ftm: Use flat regmap cache
we've had a very calm development cycle, so far. Here are the few
fixes for HD-audio and USB-audio, all of which are small and easy.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=PYqq
-----END PGP SIGNATURE-----
Merge tag 'sound-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"We've had a very calm development cycle, so far. Here are the few
fixes for HD-audio and USB-audio, all of which are small and easy"
* tag 'sound-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix inconsistent monitor_present state until repoll
ALSA: hda - Fix regression of monitor_present flag in eld proc file
ALSA: usb-audio: Skip volume controls triggers hangup on Dell USB Dock
ALSA: hda/realtek - Enable the ALC292 dock fixup on the Thinkpad T460s
ALSA: sscape: Use correct format identifier for size_t
ALSA: usb-audio: Add a quirk for Plantronics BT300
ALSA: usb-audio: Add a sample rate quirk for Phoenix Audio TMX320
ALSA: hda - Bind with i915 only when Intel graphics is present
Merge branch 'bpf-ARG_PTR_TO_RAW_STACK'
Daniel Borkmann says:
====================
BPF updates
This series adds a new verifier argument type called
ARG_PTR_TO_RAW_STACK and converts related helpers to make
use of it. Basic idea is that we can save init of stack
memory when the helper function is guaranteed to fully
fill out the passed buffer in every path. Series also adds
test cases and converts samples. For more details, please
see individual patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull mailbox fixes from Jussi Brar:
"Misc fixes:
mailbox-test driver:
- prevent memory leak and another cosmetic change
mailbox:
- change the returned error code
Xgene driver:
- return -ENOMEM instead of PTR_ERR for failed devm_kzalloc"
* 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: Stop using ENOSYS for anything other than unimplemented syscalls
mailbox: mailbox-test: Prevent memory leak
mailbox: mailbox-test: Use more consistent format for calling copy_from_user()
mailbox: xgene-slimpro: Fix wrong test for devm_kzalloc
This adds test cases mostly around ARG_PTR_TO_RAW_STACK to check the
verifier behaviour.
[...]
#84 raw_stack: no skb_load_bytes OK
#85 raw_stack: skb_load_bytes, no init OK
#86 raw_stack: skb_load_bytes, init OK
#87 raw_stack: skb_load_bytes, spilled regs around bounds OK
#88 raw_stack: skb_load_bytes, spilled regs corruption OK
#89 raw_stack: skb_load_bytes, spilled regs corruption 2 OK
#90 raw_stack: skb_load_bytes, spilled regs + data OK
#91 raw_stack: skb_load_bytes, invalid access 1 OK
#92 raw_stack: skb_load_bytes, invalid access 2 OK
#93 raw_stack: skb_load_bytes, invalid access 3 OK
#94 raw_stack: skb_load_bytes, invalid access 4 OK
#95 raw_stack: skb_load_bytes, invalid access 5 OK
#96 raw_stack: skb_load_bytes, invalid access 6 OK
#97 raw_stack: skb_load_bytes, large access OK
Summary: 98 PASSED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the zero initialization in the sample programs where appropriate.
Note that this is an optimization which is now possible, old programs
still doing the zero initialization are just fine as well. Also, make
sure we don't have padding issues when we don't memset() the entire
struct anymore.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch converts all helpers that can use ARG_PTR_TO_RAW_STACK as argument
type. For tc programs this is bpf_skb_load_bytes(), bpf_skb_get_tunnel_key(),
bpf_skb_get_tunnel_opt(). For tracing, this optimizes bpf_get_current_comm()
and bpf_probe_read(). The check in bpf_skb_load_bytes() for MAX_BPF_STACK can
also be removed since the verifier already makes sure we stay within bounds
on stack buffers.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When passing buffers from eBPF stack space into a helper function, we have
ARG_PTR_TO_STACK argument type for helpers available. The verifier makes sure
that such buffers are initialized, within boundaries, etc.
However, the downside with this is that we have a couple of helper functions
such as bpf_skb_load_bytes() that fill out the passed buffer in the expected
success case anyway, so zero initializing them prior to the helper call is
unneeded/wasted instructions in the eBPF program that can be avoided.
Therefore, add a new helper function argument type called ARG_PTR_TO_RAW_STACK.
The idea is to skip the STACK_MISC check in check_stack_boundary() and color
the related stack slots as STACK_MISC after we checked all call arguments.
Helper functions using ARG_PTR_TO_RAW_STACK must make sure that every path of
the helper function will fill the provided buffer area, so that we cannot leak
any uninitialized stack memory. This f.e. means that error paths need to
memset() the buffers, but the expected fast-path doesn't have to do this
anymore.
Since there's no such helper needing more than at most one ARG_PTR_TO_RAW_STACK
argument, we can keep it simple and don't need to check for multiple areas.
Should in future such a use-case really appear, we have check_raw_mode() that
will make sure we implement support for it first.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when the verifier checks calls in check_call() function, we
call check_func_arg() for all 5 arguments e.g. to make sure expected types
are correct. In some cases, we collect meta data (here: map pointer) to
perform additional checks such as checking stack boundary on key/value
sizes for subsequent arguments. As we're going to extend the meta data,
add a generic struct bpf_call_arg_meta that we can use for passing into
check_func_arg().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds what's missing to properly support RPS and RFS on SCTP,
as some of it is already implemented in common calls.
Having support for RPS and RFS allows better scaling specially because
not all NICs support hashing SCTP headers.
Save the hash right when we dequeue a skb from inqueue so we do it only
once per skb instead of per chunk. New sockets will then inherit the
hash through sctp_copy_sock().
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skbs given to validate_xmit_skb() should not have a next
pointer anymore.
Also if a packet is dropped, increment dev->tx_dropped
__dev_queue_xmit() no longer has to change tx_dropped in this case.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These patches fix f2fs and fscrypto based on -rc3 bug fixes in ext4 crypto,
which have not yet been fully propagated as follows.
- use of dget_parent and file_dentry to avoid crashes
- disallow RCU-mode lookup in d_invalidate
- disallow -ENOMEM in the core data encryption path
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ML1+
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs/fscrypto fixes from Jaegeuk Kim:
"In addition to f2fs/fscrypto fixes, I've added one patch which
prevents RCU mode lookup in d_revalidate, as Al mentioned.
These patches fix f2fs and fscrypto based on -rc3 bug fixes in ext4
crypto, which have not yet been fully propagated as follows.
- use of dget_parent and file_dentry to avoid crashes
- disallow RCU-mode lookup in d_invalidate
- disallow -ENOMEM in the core data encryption path"
* tag 'for-linus-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
ext4/fscrypto: avoid RCU lookup in d_revalidate
fscrypto: don't let data integrity writebacks fail with ENOMEM
f2fs: use dget_parent and file_dentry in f2fs_file_open
fscrypto: use dget_parent() in fscrypt_d_revalidate()
Only core revisions older than 4 use BGMAC_CMDCFG_SR_REV0. This mainly
fixes support for BCM4708A0KF SoCs with Ethernet core rev 5 (it means
only some devices as most of BCM4708A0KF-s got core rev 4).
This was tested for regressions on BCM47094 which doesn't seem to care
which bit gets used.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull crypto fixes from Herbert Xu:
"This fixes an NFS regression caused by the skcipher/hash conversion in
sunrpc. It also fixes a build problem in certain configurations with
bcm63xx"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
hwrng: bcm63xx - fix device tree compilation
sunrpc: Fix skcipher/shash conversion
Craig Gallek says:
====================
Fixes for SO_REUSEPORT and mixed v4/v6 sockets
Recent changes to the datastructures associated with SO_REUSEPORT broke
an existing behavior when equivalent SO_REUSEPORT sockets are created
using both AF_INET and AF_INET6. This patch series restores the previous
behavior and includes a test to validate it.
This series should be a trivial merge to stable kernels (if deemed
necessary), but will have conflicts in net-next. The following patches
recently replaced the use of hlist_nulls with hlists for UDP and TCP
socket lists:
ca065d0cf8 ("udp: no longer use SLAB_DESTROY_BY_RCU")
3b24d854cb ("tcp/dccp: do not touch listener sk_refcnt under synflood")
If this series is accepted, I will send an RFC for the net-next change
to assist with the merge.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Test to validate the behavior of SO_REUSEPORT sockets that are
created with both AF_INET and AF_INET6. See the commit prior to this
for a description of this behavior.
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the SO_REUSEPORT socket option, it is possible to create sockets
in the AF_INET and AF_INET6 domains which are bound to the same IPv4 address.
This is only possible with SO_REUSEPORT and when not using IPV6_V6ONLY on
the AF_INET6 sockets.
Prior to the commits referenced below, an incoming IPv4 packet would
always be routed to a socket of type AF_INET when this mixed-mode was used.
After those changes, the same packet would be routed to the most recently
bound socket (if this happened to be an AF_INET6 socket, it would
have an IPv4 mapped IPv6 address).
The change in behavior occurred because the recent SO_REUSEPORT optimizations
short-circuit the socket scoring logic as soon as they find a match. They
did not take into account the scoring logic that favors AF_INET sockets
over AF_INET6 sockets in the event of a tie.
To fix this problem, this patch changes the insertion order of AF_INET
and AF_INET6 addresses in the TCP and UDP socket lists when the sockets
have SO_REUSEPORT set. AF_INET sockets will be inserted at the head of the
list and AF_INET6 sockets with SO_REUSEPORT set will always be inserted at
the tail of the list. This will force AF_INET sockets to always be
considered first.
Fixes: e32ea7e747 ("soreuseport: fast reuseport UDP socket selection")
Fixes: 125e80b88687 ("soreuseport: fast reuseport TCP socket selection")
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We now have a positive report of another Huawei device needing
this quirk: The ME906s-158 (12d1:15c1). This is an m.2 form
factor modem with no obvious relationship to the E3372 (12d1:157d)
we already have a quirk entry for. This is reason enough to
believe the quirk might be necessary for any number of current
and future Huawei devices.
Applying the quirk to all Huawei devices, since it is crucial
to any device affected by the firmware bug, while the impact
on non-affected devices is negligible.
The quirk can if necessary be disabled per-device by writing
N to /sys/class/net/<iface>/cdc_ncm/ndp_to_end
Reported-by: Andreas Fett <andreas.fett@secunet.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull keys bugfixes from James Morris:
"Two bugfixes for Keys related code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
ASN.1: fix open failure check on headername
assoc_array: don't call compare_object() on a node
consume_skb() isn't for error cases that kfree_skb() is more proper
one. At this patch, it fixed tpacket_rcv() and packet_rcv() to be
consistent for error or non-error cases letting perf trace its event
properly.
Signed-off-by: Weongyo Jeong <weongyo.linux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The READ_LOCK macro was incorrectly returning -EINVAL if
dm_bm_is_read_only() was true -- it will always be true once the cache
metadata transitions to read-only by dm_cache_metadata_set_read_only().
Wrap READ_LOCK and WRITE_LOCK multi-statement macros in do {} while(0).
Also, all accesses of the 'cmd' argument passed to these related macros
are now encapsulated in parenthesis.
A follow-up patch can be developed to eliminate the use of macros in
favor of pure C code. Avoiding that now given that this needs to apply
to stable@.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fixes: d14fcf3dd7 ("dm cache: make sure every metadata function checks fail_io")
Cc: stable@vger.kernel.org
This fixes Ethernet on D-Link DIR-885L with BCM47094 SoC. Felix reported
similar fix was needed for his BCM4709 device (Buffalo WXR-1900DHP?).
I tested this for regressions on BCM4706, BCM4708A0 and BCM47081A0.
Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Until now, the requests sent to topology server are queued
to a workqueue by the generic server framework.
These messages are processed by worker threads and trigger the
registered callbacks.
To reduce latency on uniprocessor systems, explicit rescheduling
is performed using cond_resched() after MAX_RECV_MSG_COUNT(25)
messages.
This implementation on SMP systems leads to an subscriber refcnt
error as described below:
When a worker thread yields by calling cond_resched() in a SMP
system, a new worker is created on another CPU to process the
pending workitem. Sometimes the sleeping thread wakes up before
the new thread finishes execution.
This breaks the assumption on ordering and being single threaded.
The fault is more frequent when MAX_RECV_MSG_COUNT is lowered.
If the first thread was processing subscription create and the
second thread processing close(), the close request will free
the subscriber and the create request oops as follows:
[31.224137] WARNING: CPU: 2 PID: 266 at include/linux/kref.h:46 tipc_subscrb_rcv_cb+0x317/0x380 [tipc]
[31.228143] CPU: 2 PID: 266 Comm: kworker/u8:1 Not tainted 4.5.0+ #97
[31.228377] Workqueue: tipc_rcv tipc_recv_work [tipc]
[...]
[31.228377] Call Trace:
[31.228377] [<ffffffff812fbb6b>] dump_stack+0x4d/0x72
[31.228377] [<ffffffff8105a311>] __warn+0xd1/0xf0
[31.228377] [<ffffffff8105a3fd>] warn_slowpath_null+0x1d/0x20
[31.228377] [<ffffffffa0098067>] tipc_subscrb_rcv_cb+0x317/0x380 [tipc]
[31.228377] [<ffffffffa00a4984>] tipc_receive_from_sock+0xd4/0x130 [tipc]
[31.228377] [<ffffffffa00a439b>] tipc_recv_work+0x2b/0x50 [tipc]
[31.228377] [<ffffffff81071925>] process_one_work+0x145/0x3d0
[31.246554] ---[ end trace c3882c9baa05a4fd ]---
[31.248327] BUG: spinlock bad magic on CPU#2, kworker/u8:1/266
[31.249119] BUG: unable to handle kernel NULL pointer dereference at 0000000000000428
[31.249323] IP: [<ffffffff81099d0c>] spin_dump+0x5c/0xe0
[31.249323] PGD 0
[31.249323] Oops: 0000 [#1] SMP
In this commit, we
- rename tipc_conn_shutdown() to tipc_conn_release().
- move connection release callback execution from tipc_close_conn()
to a new function tipc_sock_release(), which is executed before
we free the connection.
Thus we release the subscriber during connection release procedure
rather than connection shutdown procedure.
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin KaFai Lau says:
====================
ipv6: datagram: Update dst cache of a connected udp sk during pmtu update
v2:
~ Protect __sk_dst_get() operations with rcu_read_lock in
release_cb() because another thread may do ip6_dst_store()
for a udp sk without taking the sk lock (e.g. in sendmsg).
~ Do a ipv6_addr_v4mapped(&sk->sk_v6_daddr) check before
calling ip6_datagram_dst_update() in patch 3 and 4. It is
similar to how __ip6_datagram_connect handles it.
~ One fix in ip6_datagram_dst_update() in patch 2. It needs
to check (np->flow_label & IPV6_FLOWLABEL_MASK) before
doing fl6_sock_lookup. I was confused with the naming
of IPV6_FLOWLABEL_MASK and IPV6_FLOWINFO_MASK.
~ Check dst->obsolete just on the safe side, although I think it
should at least have DST_OBSOLETE_FORCE_CHK by now.
~ Add Fixes tag to patch 3 and 4
~ Add some points from the previous discussion about holding
sk lock to the commit message in patch 3.
v1:
There is a case in connected UDP socket such that
getsockopt(IPV6_MTU) will return a stale MTU value. The reproducible
sequence could be the following:
1. Create a connected UDP socket
2. Send some datagrams out
3. Receive a ICMPV6_PKT_TOOBIG
4. No new outgoing datagrams to trigger the sk_dst_check()
logic to update the sk->sk_dst_cache.
5. getsockopt(IPV6_MTU) returns the mtu from the invalid
sk->sk_dst_cache instead of the newly created RTF_CACHE clone.
Patch 1 and 2 are the prep work.
Patch 3 and 4 are the fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a release_cb for UDPv6. It does a route lookup
and updates sk->sk_dst_cache if it is needed. It picks up the
left-over job from ip6_sk_update_pmtu() if the sk was owned
by user during the pmtu update.
It takes a rcu_read_lock to protect the __sk_dst_get() operations
because another thread may do ip6_dst_store() without taking the
sk lock (e.g. sendmsg).
Fixes: 45e4fd2668 ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reported-by: Wei Wang <weiwan@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a case in connected UDP socket such that
getsockopt(IPV6_MTU) will return a stale MTU value. The reproducible
sequence could be the following:
1. Create a connected UDP socket
2. Send some datagrams out
3. Receive a ICMPV6_PKT_TOOBIG
4. No new outgoing datagrams to trigger the sk_dst_check()
logic to update the sk->sk_dst_cache.
5. getsockopt(IPV6_MTU) returns the mtu from the invalid
sk->sk_dst_cache instead of the newly created RTF_CACHE clone.
This patch updates the sk->sk_dst_cache for a connected datagram sk
during pmtu-update code path.
Note that the sk->sk_v6_daddr is used to do the route lookup
instead of skb->data (i.e. iph). It is because a UDP socket can become
connected after sending out some datagrams in un-connected state. or
It can be connected multiple times to different destinations. Hence,
iph may not be related to where sk is currently connected to.
It is done under '!sock_owned_by_user(sk)' condition because
the user may make another ip6_datagram_connect() (i.e changing
the sk->sk_v6_daddr) while dst lookup is happening in the pmtu-update
code path.
For the sock_owned_by_user(sk) == true case, the next patch will
introduce a release_cb() which will update the sk->sk_dst_cache.
Test:
Server (Connected UDP Socket):
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Route Details:
[root@arch-fb-vm1 ~]# ip -6 r show | egrep '2fac'
2fac::/64 dev eth0 proto kernel metric 256 pref medium
2fac:face::/64 via 2fac::face dev eth0 metric 1024 pref medium
A simple python code to create a connected UDP socket:
import socket
import errno
HOST = '2fac::1'
PORT = 8080
s = socket.socket(socket.AF_INET6, socket.SOCK_DGRAM)
s.bind((HOST, PORT))
s.connect(('2fac:face::face', 53))
print("connected")
while True:
try:
data = s.recv(1024)
except socket.error as se:
if se.errno == errno.EMSGSIZE:
pmtu = s.getsockopt(41, 24)
print("PMTU:%d" % pmtu)
break
s.close()
Python program output after getting a ICMPV6_PKT_TOOBIG:
[root@arch-fb-vm1 ~]# python2 ~/devshare/kernel/tasks/fib6/udp-connect-53-8080.py
connected
PMTU:1300
Cache routes after recieving TOOBIG:
[root@arch-fb-vm1 ~]# ip -6 r show table cache
2fac:face::face via 2fac::face dev eth0 metric 0
cache expires 463sec mtu 1300 pref medium
Client (Send the ICMPV6_PKT_TOOBIG):
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
scapy is used to generate the TOOBIG message. Here is the scapy script I have
used:
>>> p=Ether(src='da:75:4d:36:ac:32', dst='52:54:00:12:34:66', type=0x86dd)/IPv6(src='2fac::face', dst='2fac::1')/ICMPv6PacketTooBig(mtu=1300)/IPv6(src='2fac::
1',dst='2fac:face::face', nh='UDP')/UDP(sport=8080,dport=53)
>>> sendp(p, iface='qemubr0')
Fixes: 45e4fd2668 ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reported-by: Wei Wang <weiwan@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moves the route lookup and update codes for connected
datagram sk to a newly created function ip6_datagram_dst_update()
It will be reused during the pmtu update in the later patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move flowi6 init codes for connected datagram sk to a newly created
function ip6_datagram_flow_key_init().
Notes:
1. fl6_flowlabel is used instead of fl6.flowlabel in __ip6_datagram_connect
2. ipv6_addr_is_multicast(&fl6->daddr) is used instead of
(addr_type & IPV6_ADDR_MULTICAST) in ip6_datagram_flow_key_init()
This new function will be reused during pmtu update in the later patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current binding document only describes a single interrupt. Update the
document by adding the 2 other interrupts.
The driver currently only uses a single interrupt. The HW is however able
to using IRQ grouping to split TX and RX onto separate GIC irqs.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck says:
====================
GRO Fixed IPv4 ID support and GSO partial support
This patch series sets up a few different things.
First it adds support for GRO of frames with a fixed IP ID value. This
will allow us to perform GRO for frames that go through things like an IPv6
to IPv4 header translation.
The second item we add is support for segmenting frames that are generated
this way. Most devices only support an incrementing IP ID value, and in
the case of TCP the IP ID can be ignored in many cases since the DF bit
should be set. So we can technically segment these frames using existing
TSO if we are willing to allow the IP ID to be mangled. As such I have
added a matching feature for the new form of GRO/GSO called TCP IPv4 ID
mangling. With this enabled we can assemble and disassemble a frame with
the sequence number fixed and the only ill effect will be that the IPv4 ID
will be altered which may or may not have any noticeable effect. As such I
have defaulted the feature to disabled.
The third item this patch series adds is support for partial GSO
segmentation. Partial GSO segmentation allows us to split a large frame
into two pieces. The first piece will have an even multiple of MSS worth
of data and the headers before the one pointed to by csum_start will have
been updated so that they are correct for if the data payload had already
been segmented. By doing this we can do things such as precompute the
outer header checksums for a frame to be segmented allowing us to perform
TSO on devices that don't support tunneling, or tunneling with outer header
checksums.
This patch set is based on the net-next tree, but I included "net: remove
netdevice gso_min_segs" in my tree as I assume it is likely to be applied
before this patch set will and I wanted to avoid a merge conflict.
v2: Fixed items reported by Jesse Gross
fixed missing GSO flag in MPLS check
adding DF check for MANGLEID
Moved extra GSO feature checks into gso_features_check
Rebased batches to account for "net: remove netdevice gso_min_segs"
Driver patches from the first patch set should still be compatible. However
I do have a few changes in them so I will submit a v2 of those to Jeff
Kirsher once these patches are accepted into net-next.
Example driver patches for i40e, ixgbe, and igb:
https://patchwork.ozlabs.org/patch/608221/https://patchwork.ozlabs.org/patch/608224/https://patchwork.ozlabs.org/patch/608225/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This document is a starting point for defining the TSO and GSO features.
The whole thing is starting to get a bit messy so I wanted to make sure we
have notes somwhere to start describing what does and doesn't work.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko